1 // Copyright (C) 2014-20xx CEA/DEN, EDF R&D
3 // File: PartSet_WidgetSketchLabel.cpp
4 // Created: 07 July 2014
5 // Author: Vitaly SMETANNIKOV
7 #include "PartSet_WidgetSketchLabel.h"
8 #include "PartSet_Tools.h"
9 #include "PartSet_Module.h"
10 #include "PartSet_PreviewPlanes.h"
12 #include "SketchPlugin_SketchEntity.h"
14 #include <XGUI_Workshop.h>
15 #include <XGUI_Displayer.h>
16 #include <XGUI_SelectionMgr.h>
17 #include <XGUI_Selection.h>
18 #include <XGUI_ViewerProxy.h>
19 #include <XGUI_ActionsMgr.h>
20 #include <XGUI_Tools.h>
21 #include <XGUI_ModuleConnector.h>
23 #include <ModuleBase_Operation.h>
24 #include <ModuleBase_ViewerPrs.h>
25 #include <ModuleBase_Tools.h>
26 #include <ModuleBase_IModule.h>
28 #include <ModelAPI_ResultBody.h>
29 #include <ModelAPI_Tools.h>
31 #include <GeomAlgoAPI_FaceBuilder.h>
32 #include <GeomAlgoAPI_ShapeTools.h>
33 #include <GeomDataAPI_Point.h>
34 #include <GeomDataAPI_Dir.h>
35 #include <GeomAPI_XYZ.h>
36 #include <GeomAPI_Face.h>
38 #include <SketchPlugin_Sketch.h>
39 #include <SketcherPrs_Tools.h>
41 #include <Precision.hxx>
45 #include <AIS_Shape.hxx>
46 #include <AIS_DimensionSelectionMode.hxx>
47 #include <Bnd_Box.hxx>
49 #include <Config_WidgetAPI.h>
50 #include <Config_PropManager.h>
53 #include <QApplication>
54 #include <QVBoxLayout>
55 #include <QHBoxLayout>
58 #include <QPushButton>
59 #include <QStackedWidget>
61 #include <QDoubleValidator>
64 #define DBL_MAX 1.7976931348623158e+308
67 PartSet_WidgetSketchLabel::PartSet_WidgetSketchLabel(QWidget* theParent,
68 ModuleBase_IWorkshop* theWorkshop,
69 const Config_WidgetAPI* theData,
70 const QMap<PartSet_Tools::ConstraintVisibleState, bool>& toShowConstraints)
71 : ModuleBase_WidgetValidated(theParent, theWorkshop, theData)
73 QVBoxLayout* aLayout = new QVBoxLayout(this);
74 ModuleBase_Tools::zeroMargins(aLayout);
76 myStackWidget = new QStackedWidget(this);
77 myStackWidget->setContentsMargins(0,0,0,0);
78 aLayout->addWidget(myStackWidget);
80 // Define label for plane selection
81 QWidget* aFirstWgt = new QWidget(this);
83 // Size of the View control
84 mySizeOfViewWidget = new QWidget(aFirstWgt);
85 QHBoxLayout* aSizeLayout = new QHBoxLayout(mySizeOfViewWidget);
86 aSizeLayout->addWidget(new QLabel("Size of the view", mySizeOfViewWidget));
87 mySizeOfView = new QLineEdit(mySizeOfViewWidget);
89 QDoubleValidator* aValidator = new QDoubleValidator(0, DBL_MAX, 12, mySizeOfView);
90 aValidator->setLocale(ModuleBase_Tools::doubleLocale());
91 aValidator->setNotation(QDoubleValidator::StandardNotation);
92 mySizeOfView->setValidator(aValidator);
93 aSizeLayout->addWidget(mySizeOfView);
95 QString aText = QString::fromStdString(theData->getProperty("title"));
96 QLabel* aLabel = new QLabel(aText, aFirstWgt);
97 aLabel->setWordWrap(true);
98 QString aTooltip = QString::fromStdString(theData->getProperty("tooltip"));
99 aLabel->setToolTip(aTooltip);
100 aLabel->setIndent(5);
102 aLayout = new QVBoxLayout(aFirstWgt);
103 ModuleBase_Tools::zeroMargins(aLayout);
104 aLayout->addWidget(mySizeOfViewWidget);
105 aLayout->addWidget(aLabel);
106 aLayout->addStretch(1);
108 myStackWidget->addWidget(aFirstWgt);
110 // Define widget for sketch manmagement
111 QWidget* aSecondWgt = new QWidget(this);
112 aLayout = new QVBoxLayout(aSecondWgt);
113 ModuleBase_Tools::zeroMargins(aLayout);
115 QGroupBox* aViewBox = new QGroupBox(tr("Sketcher plane"), this);
116 QVBoxLayout* aViewLayout = new QVBoxLayout(aViewBox);
118 myViewInverted = new QCheckBox(tr("Reversed"), aViewBox);
119 aViewLayout->addWidget(myViewInverted);
121 QPushButton* aSetViewBtn =
122 new QPushButton(QIcon(":icons/plane_view.png"), tr("Set plane view"), aViewBox);
123 connect(aSetViewBtn, SIGNAL(clicked(bool)), this, SLOT(onSetPlaneView()));
124 aViewLayout->addWidget(aSetViewBtn);
126 aLayout->addWidget(aViewBox);
128 QMap<PartSet_Tools::ConstraintVisibleState, QString> aStates;
129 aStates[PartSet_Tools::Geometrical] = tr("Show geometrical constraints");
130 aStates[PartSet_Tools::Dimensional] = tr("Show dimensional constraints");
131 aStates[PartSet_Tools::Expressions] = tr("Show existing expressions");
133 QMap<PartSet_Tools::ConstraintVisibleState, QString>::const_iterator anIt = aStates.begin(),
134 aLast = aStates.end();
135 for (; anIt != aLast; anIt++) {
136 QCheckBox* aShowConstraints = new QCheckBox(anIt.value(), this);
137 connect(aShowConstraints, SIGNAL(toggled(bool)), this, SLOT(onShowConstraint(bool)));
138 aLayout->addWidget(aShowConstraints);
140 PartSet_Tools::ConstraintVisibleState aState = anIt.key();
141 myShowConstraints[aState] = aShowConstraints;
143 if (toShowConstraints.contains(aState))
144 aShowConstraints->setChecked(toShowConstraints[aState]);
147 myStackWidget->addWidget(aSecondWgt);
148 //setLayout(aLayout);
150 myPreviewPlanes = new PartSet_PreviewPlanes();
153 PartSet_WidgetSketchLabel::~PartSet_WidgetSketchLabel()
157 bool PartSet_WidgetSketchLabel::setSelection(QList<ModuleBase_ViewerPrsPtr>& theValues,
158 const bool theToValidate)
160 // do not use the given selection if the plane of the sketch has been already set.
161 // If this check is absent, a selected plane in the viewer can be set in the sketch
162 // even if the sketch is built on another plane.
166 ModuleBase_ViewerPrsPtr aPrs = theValues.first();
167 bool aDone = setSelectionInternal(theValues, theToValidate);
169 updateByPlaneSelected(aPrs);
173 QList<QWidget*> PartSet_WidgetSketchLabel::getControls() const
175 QList<QWidget*> aResult;
176 aResult << myStackWidget;
180 void PartSet_WidgetSketchLabel::onSelectionChanged()
182 QList<ModuleBase_ViewerPrsPtr> aSelected = getFilteredSelected();
184 if (aSelected.empty())
186 ModuleBase_ViewerPrsPtr aPrs = aSelected.first();
187 bool aDone = setSelectionInternal(aSelected, false);
189 updateByPlaneSelected(aPrs);
190 updateObject(myFeature);
194 void PartSet_WidgetSketchLabel::onShowConstraint(bool theOn)
196 QCheckBox* aSenderCheckBox = qobject_cast<QCheckBox*>(sender());
198 QMap<PartSet_Tools::ConstraintVisibleState, QCheckBox*>::const_iterator
199 anIt = myShowConstraints.begin(), aLast = myShowConstraints.end();
201 PartSet_Tools::ConstraintVisibleState aState = PartSet_Tools::Geometrical;
203 for (; anIt != aLast && !aFound; anIt++) {
204 aFound = anIt.value() == aSenderCheckBox;
209 emit showConstraintToggled(aState, theOn);
212 void PartSet_WidgetSketchLabel::blockAttribute(const AttributePtr& theAttribute,
213 const bool& theToBlock, bool& isFlushesActived,
214 bool& isAttributeSetInitializedBlocked,
215 bool& isAttributeSendUpdatedBlocked)
217 ModuleBase_WidgetValidated::blockAttribute(theAttribute, theToBlock, isFlushesActived,
218 isAttributeSetInitializedBlocked,
219 isAttributeSendUpdatedBlocked);
220 // We do not restore the previous state of isAttributeSetInitializedBlocked for each of
221 // attributes. It it is necessary, these states should be append to the method attributes
222 // or stored in the widget
224 std::list<AttributePtr> anAttributes = myFeature->data()->attributes("");
225 std::list<AttributePtr>::const_iterator anIt = anAttributes.begin(), aLast = anAttributes.end();
227 for(; anIt != aLast; anIt++) {
228 AttributePtr anAttribute = *anIt;
230 anAttribute->blockSetInitialized(true);
232 anAttribute->blockSetInitialized(isAttributeSetInitializedBlocked);
236 bool PartSet_WidgetSketchLabel::setSelectionInternal(
237 const QList<ModuleBase_ViewerPrsPtr>& theValues,
238 const bool theToValidate)
241 if (theValues.empty()) {
242 // In order to make reselection possible, set empty object and shape should be done
243 setSelectionCustom(std::shared_ptr<ModuleBase_ViewerPrs>(
244 new ModuleBase_ViewerPrs(ObjectPtr(), GeomShapePtr(), NULL)));
248 // it removes the processed value from the parameters list
249 ModuleBase_ViewerPrsPtr aValue = theValues.first();//.takeFirst();
250 if (!theToValidate || isValidInFilters(aValue))
251 aDone = setSelectionCustom(aValue);
257 void PartSet_WidgetSketchLabel::updateByPlaneSelected(const ModuleBase_ViewerPrsPtr& thePrs)
259 // 1. hide main planes if they have been displayed
260 myPreviewPlanes->erasePreviewPlanes(myWorkshop);
261 // 2. if the planes were displayed, change the view projection
262 const GeomShapePtr& aShape = thePrs->shape();
263 std::shared_ptr<GeomAPI_Shape> aGShape;
265 DataPtr aData = feature()->data();
266 AttributeSelectionPtr aSelAttr = std::dynamic_pointer_cast<ModelAPI_AttributeSelection>
267 (aData->attribute(SketchPlugin_SketchEntity::EXTERNAL_ID()));
269 // selection happens in OCC viewer
270 if (aShape.get() && !aShape->isNull()) {
273 else { // selection happens in OCC viewer(on body) of in the OB browser
275 aGShape = aSelAttr->value();
278 // If the selected object is a sketch then use its plane
279 std::shared_ptr<GeomAPI_Pln> aPlane;
280 ObjectPtr aObj = thePrs->object();
282 FeaturePtr aFeature = ModelAPI_Feature::feature(aObj);
283 if (aFeature.get() && (aFeature != feature())) {
284 if (aFeature->getKind() == SketchPlugin_Sketch::ID()) {
285 CompositeFeaturePtr aSketch =
286 std::dynamic_pointer_cast<ModelAPI_CompositeFeature>(aFeature);
287 aPlane = PartSet_Tools::sketchPlane(aSketch);
291 if (aGShape.get() != NULL) {
292 // get plane parameters
294 std::shared_ptr<GeomAPI_Face> aFace(new GeomAPI_Face(aGShape));
295 aPlane = aFace->getPlane();
299 std::shared_ptr<GeomAPI_Dir> aDir = aPlane->direction();
300 gp_XYZ aXYZ = aDir->impl<gp_Dir>().XYZ();
303 // orienting projection is not needed: it is done in GeomAlgoAPI_FaceBuilder::plane
304 /*if (aGShape->impl<TopoDS_Shape>().Orientation() == TopAbs_REVERSED) {
308 // Rotate view if the sketcher plane is selected only from preview planes
309 // Preview planes are created only if there is no any shape
310 bool aRotate = Config_PropManager::boolean(SKETCH_TAB_NAME, "rotate_to_plane");
312 myWorkshop->viewer()->setViewProjection(aXYZ.X(), aXYZ.Y(), aXYZ.Z(), aTwist);
313 PartSet_Module* aModule = dynamic_cast<PartSet_Module*>(myWorkshop->module());
315 aModule->onViewTransformed();
317 QString aSizeOfViewStr = mySizeOfView->text();
318 if (!aSizeOfViewStr.isEmpty()) {
320 double aSizeOfView = aSizeOfViewStr.toDouble(&isOk);
321 if (isOk && aSizeOfView > 0) {
322 Handle(V3d_View) aView3d = myWorkshop->viewer()->activeView();
323 if (!aView3d.IsNull()) {
325 double aHalfSize = aSizeOfView/2.0;
326 aBndBox.Update(-aHalfSize, -aHalfSize, -aHalfSize, aHalfSize, aHalfSize, aHalfSize);
327 aView3d->FitAll(aBndBox, 0.01, false);
332 // 3. Clear text in the label
333 myStackWidget->setCurrentIndex(1);
334 //myLabel->setText("");
335 //myLabel->setToolTip("");
336 XGUI_Workshop* aWorkshop = XGUI_Tools::workshop(myWorkshop);
337 disconnect(aWorkshop->selector(), SIGNAL(selectionChanged()),
338 this, SLOT(onSelectionChanged()));
339 // 4. deactivate face selection filter
340 activateFilters(false);
342 // 5. Clear selection mode and define sketching mode
343 emit planeSelected(plane());
344 // after the plane is selected in the sketch, the sketch selection should be activated
345 // it can not be performed in the sketch label widget because, we don't need to switch off
346 // the selection by any label deactivation, but need to switch it off by stop the sketch
347 activateSelection(true);
349 // 6. Update sketcher actions
350 XGUI_ActionsMgr* anActMgr = aWorkshop->actionsMgr();
351 myWorkshop->updateCommandStatus();
352 myWorkshop->viewer()->update();
355 std::shared_ptr<GeomAPI_Pln> PartSet_WidgetSketchLabel::plane() const
357 CompositeFeaturePtr aSketch = std::dynamic_pointer_cast<ModelAPI_CompositeFeature>(myFeature);
358 return PartSet_Tools::sketchPlane(aSketch);
361 bool PartSet_WidgetSketchLabel::focusTo()
363 ModuleBase_Tools::setFocus(myStackWidget, "PartSet_WidgetSketchLabel::focusTo()");
367 void PartSet_WidgetSketchLabel::enableFocusProcessing()
369 myStackWidget->installEventFilter(this);
372 void PartSet_WidgetSketchLabel::storeAttributeValue(const AttributePtr& theAttribute)
374 ModuleBase_WidgetValidated::storeAttributeValue(theAttribute);
377 void PartSet_WidgetSketchLabel::restoreAttributeValue(const AttributePtr& theAttribute,
380 ModuleBase_WidgetValidated::restoreAttributeValue(theAttribute, theValid);
382 // it is not necessary to save the previous plane value because the plane is chosen once
383 DataPtr aData = feature()->data();
384 AttributeSelectionPtr aSelAttr = std::dynamic_pointer_cast<ModelAPI_AttributeSelection>
385 (aData->attribute(SketchPlugin_SketchEntity::EXTERNAL_ID()));
387 ResultPtr anEmptyResult;
388 GeomShapePtr anEmptyShape;
389 aSelAttr->setValue(anEmptyResult, anEmptyShape);
393 bool PartSet_WidgetSketchLabel::setSelectionCustom(const ModuleBase_ViewerPrsPtr& thePrs)
395 return fillSketchPlaneBySelection(thePrs);
398 bool PartSet_WidgetSketchLabel::canFillSketch(const ModuleBase_ViewerPrsPtr& thePrs)
400 bool aCanFillSketch = true;
401 // avoid any selection on sketch object
402 ObjectPtr anObject = thePrs->object();
403 ResultPtr aResult = std::dynamic_pointer_cast<ModelAPI_Result>(anObject);
405 FeaturePtr aFeature = ModelAPI_Feature::feature(aResult);
406 if (aFeature->getKind() == SketchPlugin_Sketch::ID())
407 aCanFillSketch = false;
409 // check plane or planar face of any non-sketch object
410 if (aCanFillSketch) {
411 std::shared_ptr<GeomAPI_Face> aGeomFace;
413 GeomShapePtr aGeomShape = thePrs->shape();
414 if ((!aGeomShape.get() || aGeomShape->isNull()) && aResult.get()) {
415 aGeomShape = aResult->shape();
418 if (aGeomShape.get() && aGeomShape->shapeType() == GeomAPI_Shape::FACE) {
419 std::shared_ptr<GeomAPI_Face> aGeomFace(new GeomAPI_Face(aGeomShape));
420 aCanFillSketch = aGeomFace.get() && aGeomFace->isPlanar();
423 aCanFillSketch = false;
425 return aCanFillSketch;
428 bool PartSet_WidgetSketchLabel::fillSketchPlaneBySelection(const ModuleBase_ViewerPrsPtr& thePrs)
430 bool isOwnerSet = false;
432 const GeomShapePtr& aShape = thePrs->shape();
433 std::shared_ptr<GeomAPI_Dir> aDir;
435 if (thePrs->object() && (feature() != thePrs->object())) {
436 FeaturePtr aFeature = ModelAPI_Feature::feature(thePrs->object());
437 if (aFeature.get() && (aFeature != feature())) {
438 if (aFeature->getKind() == SketchPlugin_Sketch::ID()) {
439 CompositeFeaturePtr aSketch =
440 std::dynamic_pointer_cast<ModelAPI_CompositeFeature>(aFeature);
441 std::shared_ptr<GeomAPI_Pln> aPlane = PartSet_Tools::sketchPlane(aSketch);
443 aDir = setSketchPlane(aPlane);
448 DataPtr aData = feature()->data();
449 AttributeSelectionPtr aSelAttr =
450 std::dynamic_pointer_cast<ModelAPI_AttributeSelection>
451 (aData->attribute(SketchPlugin_SketchEntity::EXTERNAL_ID()));
453 ResultPtr aRes = std::dynamic_pointer_cast<ModelAPI_Result>(thePrs->object());
455 GeomShapePtr aShapePtr(new GeomAPI_Shape());
456 if (!aShape.get() || aShape->isNull()) { // selection happens in the OCC viewer
457 aShapePtr = ModelAPI_Tools::shape(aRes);
459 else { // selection happens in OB browser
462 if (aShapePtr.get() != NULL) {
463 aSelAttr->setValue(aRes, aShapePtr);
469 else if (aShape.get() && !aShape->isNull()) {
470 const TopoDS_Shape& aTDShape = aShape->impl<TopoDS_Shape>();
471 aDir = setSketchPlane(aTDShape);
472 isOwnerSet = aDir.get();
477 void PartSet_WidgetSketchLabel::activateCustom()
479 std::shared_ptr<GeomAPI_Pln> aPlane = plane();
481 myStackWidget->setCurrentIndex(1);
482 activateSelection(true);
486 myStackWidget->setCurrentIndex(0);
487 bool aBodyIsVisualized = myPreviewPlanes->hasVisualizedBodies(myWorkshop);
489 // Clear previous selection mode It is necessary for correct activation of preview planes
490 XGUI_Workshop* aWorkshop = XGUI_Tools::workshop(myWorkshop);
491 XGUI_Displayer* aDisp = aWorkshop->displayer();
492 aDisp->activateObjects(QIntList(), aDisp->displayedObjects(), false);
494 if (!aBodyIsVisualized) {
495 // We have to select a plane before any operation
496 myPreviewPlanes->showPreviewPlanes(myWorkshop);
497 mySizeOfViewWidget->setVisible(true);
500 mySizeOfViewWidget->setVisible(false);
502 activateSelection(true);
504 connect(XGUI_Tools::workshop(myWorkshop)->selector(), SIGNAL(selectionChanged()),
505 this, SLOT(onSelectionChanged()));
506 activateFilters(true);
509 void PartSet_WidgetSketchLabel::deactivate()
511 ModuleBase_ModelWidget::deactivate();
512 bool aHidePreview = myPreviewPlanes->isPreviewDisplayed();
513 myPreviewPlanes->erasePreviewPlanes(myWorkshop);
514 activateSelection(false);
516 activateFilters(false);
518 myWorkshop->viewer()->update();
521 void PartSet_WidgetSketchLabel::activateSelection(bool toActivate)
525 std::shared_ptr<GeomAPI_Pln> aPlane = plane();
527 myWorkshop->module()->activeSelectionModes(aModes);
530 aModes << TopAbs_FACE;
532 myWorkshop->activateSubShapesSelection(aModes);
534 myWorkshop->deactivateSubShapesSelection();
539 std::shared_ptr<GeomAPI_Dir>
540 PartSet_WidgetSketchLabel::setSketchPlane(const TopoDS_Shape& theShape)
542 if (theShape.IsNull())
543 return std::shared_ptr<GeomAPI_Dir>();
545 // get selected shape
546 std::shared_ptr<GeomAPI_Shape> aGShape(new GeomAPI_Shape);
547 aGShape->setImpl(new TopoDS_Shape(theShape));
549 // get plane parameters
550 std::shared_ptr<GeomAPI_Face> aFace(new GeomAPI_Face(aGShape));
551 std::shared_ptr<GeomAPI_Pln> aPlane = aFace->getPlane();
553 return std::shared_ptr<GeomAPI_Dir>();
554 return setSketchPlane(aPlane);
557 std::shared_ptr<GeomAPI_Dir>
558 PartSet_WidgetSketchLabel::setSketchPlane(std::shared_ptr<GeomAPI_Pln> thePlane)
560 // set plane parameters to feature
561 std::shared_ptr<ModelAPI_Data> aData = feature()->data();
562 double anA, aB, aC, aD;
563 thePlane->coefficients(anA, aB, aC, aD);
565 // calculate attributes of the sketch
566 std::shared_ptr<GeomAPI_Dir> aNormDir(new GeomAPI_Dir(anA, aB, aC));
567 std::shared_ptr<GeomAPI_XYZ> aCoords = aNormDir->xyz();
568 std::shared_ptr<GeomAPI_XYZ> aZero(new GeomAPI_XYZ(0, 0, 0));
569 aCoords = aCoords->multiplied(-aD * aCoords->distance(aZero));
570 std::shared_ptr<GeomAPI_Pnt> anOrigPnt(new GeomAPI_Pnt(aCoords));
571 // X axis is preferable to be dirX on the sketch
572 const double tol = Precision::Confusion();
573 bool isX = fabs(anA - 1.0) < tol && fabs(aB) < tol && fabs(aC) < tol;
574 std::shared_ptr<GeomAPI_Dir> aTempDir(
575 isX ? new GeomAPI_Dir(0, 1, 0) : new GeomAPI_Dir(1, 0, 0));
576 std::shared_ptr<GeomAPI_Dir> aYDir(new GeomAPI_Dir(aNormDir->cross(aTempDir)));
577 std::shared_ptr<GeomAPI_Dir> aXDir(new GeomAPI_Dir(aYDir->cross(aNormDir)));
579 std::shared_ptr<GeomDataAPI_Point> anOrigin = std::dynamic_pointer_cast<GeomDataAPI_Point>(
580 aData->attribute(SketchPlugin_Sketch::ORIGIN_ID()));
581 anOrigin->setValue(anOrigPnt);
582 std::shared_ptr<GeomDataAPI_Dir> aNormal = std::dynamic_pointer_cast<GeomDataAPI_Dir>(
583 aData->attribute(SketchPlugin_Sketch::NORM_ID()));
584 aNormal->setValue(aNormDir);
585 std::shared_ptr<GeomDataAPI_Dir> aDirX = std::dynamic_pointer_cast<GeomDataAPI_Dir>(
586 aData->attribute(SketchPlugin_Sketch::DIRX_ID()));
587 aDirX->setValue(aXDir);
588 std::shared_ptr<GeomAPI_Dir> aDir = thePlane->direction();
592 void PartSet_WidgetSketchLabel::onSetPlaneView()
594 std::shared_ptr<GeomAPI_Pln> aPlane = plane();
596 std::shared_ptr<GeomAPI_Dir> aDirection = aPlane->direction();
597 gp_Dir aDir = aDirection->impl<gp_Dir>();
598 if (myViewInverted->isChecked())
600 myWorkshop->viewer()->setViewProjection(aDir.X(), aDir.Y(), aDir.Z(), 0.);
601 PartSet_Module* aModule = dynamic_cast<PartSet_Module*>(myWorkshop->module());
603 aModule->onViewTransformed();