1 // Copyright (C) 2014-2019 CEA/DEN, EDF R&D
3 // This library is free software; you can redistribute it and/or
4 // modify it under the terms of the GNU Lesser General Public
5 // License as published by the Free Software Foundation; either
6 // version 2.1 of the License, or (at your option) any later version.
8 // This library is distributed in the hope that it will be useful,
9 // but WITHOUT ANY WARRANTY; without even the implied warranty of
10 // MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
11 // Lesser General Public License for more details.
13 // You should have received a copy of the GNU Lesser General Public
14 // License along with this library; if not, write to the Free Software
15 // Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
17 // See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
20 #include "PartSet_WidgetSketchLabel.h"
21 #include "PartSet_Tools.h"
22 #include "PartSet_Module.h"
23 #include "PartSet_PreviewPlanes.h"
25 #include "SketchPlugin_SketchEntity.h"
27 #include <XGUI_ActionsMgr.h>
28 #include <XGUI_Displayer.h>
29 #include <XGUI_ModuleConnector.h>
30 #include <XGUI_SelectionActivate.h>
31 #include <XGUI_Selection.h>
32 #include <XGUI_SelectionMgr.h>
33 #include <XGUI_Tools.h>
34 #include <XGUI_ViewerProxy.h>
35 #include <XGUI_Workshop.h>
37 #include <ModelAPI_ResultBody.h>
38 #include <ModelAPI_Tools.h>
40 #include <ModuleBase_Operation.h>
41 #include <ModuleBase_ViewerPrs.h>
42 #include <ModuleBase_Tools.h>
43 #include <ModuleBase_IModule.h>
44 #include <ModuleBase_IPropertyPanel.h>
46 #include <GeomAlgoAPI_FaceBuilder.h>
47 #include <GeomAlgoAPI_ShapeTools.h>
48 #include <GeomDataAPI_Point.h>
49 #include <GeomDataAPI_Dir.h>
50 #include <GeomAPI_XYZ.h>
51 #include <GeomAPI_Face.h>
52 #include <GeomAPI_Edge.h>
53 #include <GeomAPI_ShapeExplorer.h>
55 #include <SketchPlugin_Sketch.h>
56 #include <SketcherPrs_Tools.h>
58 #include <Precision.hxx>
62 #include <AIS_Shape.hxx>
63 #include <AIS_DimensionSelectionMode.hxx>
64 #include <Bnd_Box.hxx>
66 #include <Config_WidgetAPI.h>
67 #include <Config_PropManager.h>
70 #include <QApplication>
71 #include <QVBoxLayout>
72 #include <QHBoxLayout>
75 #include <QPushButton>
76 #include <QStackedWidget>
78 #include <QDoubleValidator>
81 #define DBL_MAX 1.7976931348623158e+308
84 PartSet_WidgetSketchLabel::PartSet_WidgetSketchLabel(QWidget* theParent,
85 ModuleBase_IWorkshop* theWorkshop,
86 const Config_WidgetAPI* theData,
87 const QMap<PartSet_Tools::ConstraintVisibleState, bool>& toShowConstraints)
88 : ModuleBase_WidgetValidated(theParent, theWorkshop, theData), myOpenTransaction(false)
90 QVBoxLayout* aLayout = new QVBoxLayout(this);
91 ModuleBase_Tools::zeroMargins(aLayout);
93 myStackWidget = new QStackedWidget(this);
94 myStackWidget->setContentsMargins(0,0,0,0);
95 aLayout->addWidget(myStackWidget);
97 // Define label for plane selection
98 QWidget* aFirstWgt = new QWidget(this);
100 // Size of the View control
101 mySizeOfViewWidget = new QWidget(aFirstWgt);
102 QHBoxLayout* aSizeLayout = new QHBoxLayout(mySizeOfViewWidget);
103 aSizeLayout->addWidget(new QLabel("Size of the view", mySizeOfViewWidget));
104 mySizeOfView = new QLineEdit(mySizeOfViewWidget);
106 QDoubleValidator* aValidator = new QDoubleValidator(0, DBL_MAX, 12, mySizeOfView);
107 aValidator->setLocale(ModuleBase_Tools::doubleLocale());
108 aValidator->setNotation(QDoubleValidator::StandardNotation);
109 mySizeOfView->setValidator(aValidator);
110 aSizeLayout->addWidget(mySizeOfView);
112 QString aText = QString::fromStdString(theData->getProperty("title"));
113 QLabel* aLabel = new QLabel(aText, aFirstWgt);
114 aLabel->setWordWrap(true);
115 QString aTooltip = QString::fromStdString(theData->getProperty("tooltip"));
116 aLabel->setToolTip(aTooltip);
117 aLabel->setIndent(5);
119 aLayout = new QVBoxLayout(aFirstWgt);
120 ModuleBase_Tools::zeroMargins(aLayout);
121 aLayout->addWidget(mySizeOfViewWidget);
122 aLayout->addWidget(aLabel);
124 myRemoveExternal = new QCheckBox(tr("Remove external dependencies"), aFirstWgt);
125 myRemoveExternal->setChecked(false);
126 aLayout->addWidget(myRemoveExternal);
127 myRemoveExternal->setVisible(false);
129 aLayout->addStretch(1);
131 myStackWidget->addWidget(aFirstWgt);
133 // Define widget for sketch manmagement
134 QWidget* aSecondWgt = new QWidget(this);
135 aLayout = new QVBoxLayout(aSecondWgt);
136 ModuleBase_Tools::zeroMargins(aLayout);
138 QGroupBox* aViewBox = new QGroupBox(tr("Sketcher plane"), this);
139 QVBoxLayout* aViewLayout = new QVBoxLayout(aViewBox);
141 myViewInverted = new QCheckBox(tr("Reversed"), aViewBox);
142 aViewLayout->addWidget(myViewInverted);
144 QPushButton* aSetViewBtn =
145 new QPushButton(QIcon(":icons/plane_view.png"), tr("Set plane view"), aViewBox);
146 connect(aSetViewBtn, SIGNAL(clicked(bool)), this, SLOT(onSetPlaneView()));
147 aViewLayout->addWidget(aSetViewBtn);
149 aLayout->addWidget(aViewBox);
151 QMap<PartSet_Tools::ConstraintVisibleState, QString> aStates;
152 aStates[PartSet_Tools::Geometrical] = tr("Show geometrical constraints");
153 aStates[PartSet_Tools::Dimensional] = tr("Show dimensional constraints");
154 aStates[PartSet_Tools::Expressions] = tr("Show existing expressions");
156 QMap<PartSet_Tools::ConstraintVisibleState, QString>::const_iterator anIt = aStates.begin(),
157 aLast = aStates.end();
158 for (; anIt != aLast; anIt++) {
159 QCheckBox* aShowConstraints = new QCheckBox(anIt.value(), this);
160 connect(aShowConstraints, SIGNAL(toggled(bool)), this, SLOT(onShowConstraint(bool)));
161 aLayout->addWidget(aShowConstraints);
163 PartSet_Tools::ConstraintVisibleState aState = anIt.key();
164 myShowConstraints[aState] = aShowConstraints;
166 if (toShowConstraints.contains(aState))
167 aShowConstraints->setChecked(toShowConstraints[aState]);
171 QPushButton* aPlaneBtn = new QPushButton(tr("Change sketch plane"), aSecondWgt);
172 connect(aPlaneBtn, SIGNAL(clicked(bool)), SLOT(onChangePlane()));
173 aLayout->addWidget(aPlaneBtn);
175 myStackWidget->addWidget(aSecondWgt);
176 //setLayout(aLayout);
178 myPreviewPlanes = new PartSet_PreviewPlanes();
181 PartSet_WidgetSketchLabel::~PartSet_WidgetSketchLabel()
185 bool PartSet_WidgetSketchLabel::setSelection(QList<ModuleBase_ViewerPrsPtr>& theValues,
186 const bool theToValidate)
188 // do not use the given selection if the plane of the sketch has been already set.
189 // If this check is absent, a selected plane in the viewer can be set in the sketch
190 // even if the sketch is built on another plane.
194 ModuleBase_ViewerPrsPtr aPrs = theValues.first();
195 bool aDone = setSelectionInternal(theValues, theToValidate);
197 updateByPlaneSelected(aPrs);
201 QList<QWidget*> PartSet_WidgetSketchLabel::getControls() const
203 QList<QWidget*> aResult;
204 aResult << myStackWidget;
208 bool PartSet_WidgetSketchLabel::processSelection()
210 std::shared_ptr<GeomAPI_Pln> aPlane = plane();
214 QList<ModuleBase_ViewerPrsPtr> aSelected = getFilteredSelected();
216 if (aSelected.empty())
218 ModuleBase_ViewerPrsPtr aPrs = aSelected.first();
219 bool aDone = setSelectionInternal(aSelected, false);
221 updateByPlaneSelected(aPrs);
222 updateObject(myFeature);
228 void PartSet_WidgetSketchLabel::onShowConstraint(bool theOn)
230 QCheckBox* aSenderCheckBox = qobject_cast<QCheckBox*>(sender());
232 QMap<PartSet_Tools::ConstraintVisibleState, QCheckBox*>::const_iterator
233 anIt = myShowConstraints.begin(), aLast = myShowConstraints.end();
235 PartSet_Tools::ConstraintVisibleState aState = PartSet_Tools::Geometrical;
237 for (; anIt != aLast && !aFound; anIt++) {
238 aFound = anIt.value() == aSenderCheckBox;
243 emit showConstraintToggled(aState, theOn);
246 void PartSet_WidgetSketchLabel::blockAttribute(const AttributePtr& theAttribute,
247 const bool& theToBlock, bool& isFlushesActived,
248 bool& isAttributeSetInitializedBlocked,
249 bool& isAttributeSendUpdatedBlocked)
251 ModuleBase_WidgetValidated::blockAttribute(theAttribute, theToBlock, isFlushesActived,
252 isAttributeSetInitializedBlocked,
253 isAttributeSendUpdatedBlocked);
254 // We do not restore the previous state of isAttributeSetInitializedBlocked for each of
255 // attributes. It it is necessary, these states should be append to the method attributes
256 // or stored in the widget
258 std::list<AttributePtr> anAttributes = myFeature->data()->attributes("");
259 std::list<AttributePtr>::const_iterator anIt = anAttributes.begin(), aLast = anAttributes.end();
261 for(; anIt != aLast; anIt++) {
262 AttributePtr anAttribute = *anIt;
264 anAttribute->blockSetInitialized(true);
266 anAttribute->blockSetInitialized(isAttributeSetInitializedBlocked);
270 bool PartSet_WidgetSketchLabel::setSelectionInternal(
271 const QList<ModuleBase_ViewerPrsPtr>& theValues,
272 const bool theToValidate)
275 if (theValues.empty()) {
276 // In order to make reselection possible, set empty object and shape should be done
277 setSelectionCustom(std::shared_ptr<ModuleBase_ViewerPrs>(
278 new ModuleBase_ViewerPrs(ObjectPtr(), GeomShapePtr(), NULL)));
282 // it removes the processed value from the parameters list
283 ModuleBase_ViewerPrsPtr aValue = theValues.first();//.takeFirst();
284 if (!theToValidate || isValidInFilters(aValue))
285 aDone = setSelectionCustom(aValue);
291 void PartSet_WidgetSketchLabel::updateByPlaneSelected(const ModuleBase_ViewerPrsPtr& thePrs)
293 GeomPlanePtr aPlane = plane();
296 // 1. hide main planes if they have been displayed and display sketch preview plane
297 myPreviewPlanes->erasePreviewPlanes(myWorkshop);
299 PartSet_Module* aModule = dynamic_cast<PartSet_Module*>(myWorkshop->module());
301 CompositeFeaturePtr aSketch = std::dynamic_pointer_cast<ModelAPI_CompositeFeature>(myFeature);
302 bool isSetSizeOfView = false;
303 double aSizeOfView = 0;
304 QString aSizeOfViewStr = mySizeOfView->text();
305 if (!aSizeOfViewStr.isEmpty()) {
306 aSizeOfView = aSizeOfViewStr.toDouble(&isSetSizeOfView);
307 if (isSetSizeOfView && aSizeOfView <= 0) {
308 isSetSizeOfView = false;
312 aModule->sketchMgr()->previewSketchPlane()->setSizeOfView(aSizeOfView, true);
313 aModule->sketchMgr()->previewSketchPlane()->createSketchPlane(aSketch, myWorkshop);
315 aModule->sketchMgr()->previewSketchPlane()->setSizeOfView(aSizeOfView, false);
317 // 2. if the planes were displayed, change the view projection
319 std::shared_ptr<GeomAPI_Dir> aDir = aPlane->direction();
320 gp_XYZ aXYZ = aDir->impl<gp_Dir>().XYZ();
323 // Rotate view if the sketcher plane is selected only from preview planes
324 // Preview planes are created only if there is no any shape
325 bool aRotate = Config_PropManager::boolean(SKETCH_TAB_NAME, "rotate_to_plane");
327 myWorkshop->viewer()->setViewProjection(aXYZ.X(), aXYZ.Y(), aXYZ.Z(), aTwist);
329 QString aSizeOfViewStr = mySizeOfView->text();
330 if (!aSizeOfViewStr.isEmpty()) {
332 double aSizeOfView = aSizeOfViewStr.toDouble(&isOk);
333 if (isOk && aSizeOfView > 0) {
334 Handle(V3d_View) aView3d = myWorkshop->viewer()->activeView();
335 if (!aView3d.IsNull()) {
337 double aHalfSize = aSizeOfView/2.0;
338 aBndBox.Update(-aHalfSize, -aHalfSize, -aHalfSize, aHalfSize, aHalfSize, aHalfSize);
339 aView3d->FitAll(aBndBox, 0.01, false);
344 aModule->onViewTransformed();
346 if (myOpenTransaction) {
347 SessionPtr aMgr = ModelAPI_Session::get();
348 aMgr->finishOperation();
349 myOpenTransaction = false;
351 // 3. Clear text in the label
352 myStackWidget->setCurrentIndex(1);
353 //myLabel->setText("");
354 //myLabel->setToolTip("");
355 XGUI_Workshop* aWorkshop = XGUI_Tools::workshop(myWorkshop);
357 // 5. Clear selection mode and define sketching mode
358 emit planeSelected(plane());
359 // after the plane is selected in the sketch, the sketch selection should be activated
360 // it can not be performed in the sketch label widget because, we don't need to switch off
361 // the selection by any label deactivation, but need to switch it off by stop the sketch
362 myWorkshop->selectionActivate()->updateSelectionFilters();
363 myWorkshop->selectionActivate()->updateSelectionModes();
365 // 6. Update sketcher actions
366 XGUI_ActionsMgr* anActMgr = aWorkshop->actionsMgr();
368 myWorkshop->updateCommandStatus();
369 aWorkshop->selector()->clearSelection();
370 myWorkshop->viewer()->update();
372 myRemoveExternal->setVisible(false);
375 std::shared_ptr<GeomAPI_Pln> PartSet_WidgetSketchLabel::plane() const
377 CompositeFeaturePtr aSketch = std::dynamic_pointer_cast<ModelAPI_CompositeFeature>(myFeature);
378 return PartSet_Tools::sketchPlane(aSketch);
381 bool PartSet_WidgetSketchLabel::focusTo()
383 ModuleBase_Tools::setFocus(myStackWidget, "PartSet_WidgetSketchLabel::focusTo()");
387 void PartSet_WidgetSketchLabel::enableFocusProcessing()
389 myStackWidget->installEventFilter(this);
392 void PartSet_WidgetSketchLabel::storeAttributeValue(const AttributePtr& theAttribute)
394 ModuleBase_WidgetValidated::storeAttributeValue(theAttribute);
397 void PartSet_WidgetSketchLabel::restoreAttributeValue(const AttributePtr& theAttribute,
400 ModuleBase_WidgetValidated::restoreAttributeValue(theAttribute, theValid);
402 // it is not necessary to save the previous plane value because the plane is chosen once
403 DataPtr aData = feature()->data();
404 AttributeSelectionPtr aSelAttr = std::dynamic_pointer_cast<ModelAPI_AttributeSelection>
405 (aData->attribute(SketchPlugin_SketchEntity::EXTERNAL_ID()));
407 ResultPtr anEmptyResult;
408 GeomShapePtr anEmptyShape;
409 aSelAttr->setValue(anEmptyResult, anEmptyShape);
413 bool PartSet_WidgetSketchLabel::setSelectionCustom(const ModuleBase_ViewerPrsPtr& thePrs)
415 if (myRemoveExternal->isVisible()) {
416 if (myRemoveExternal->isChecked()) {
417 myFeature->customAction(SketchPlugin_Sketch::ACTION_REMOVE_EXTERNAL());
420 return fillSketchPlaneBySelection(thePrs);
423 bool PartSet_WidgetSketchLabel::canFillSketch(const ModuleBase_ViewerPrsPtr& thePrs)
425 bool aCanFillSketch = true;
426 // avoid any selection on sketch object
427 ObjectPtr anObject = thePrs->object();
428 ResultPtr aResult = std::dynamic_pointer_cast<ModelAPI_Result>(anObject);
430 FeaturePtr aFeature = ModelAPI_Feature::feature(aResult);
431 if (aFeature->getKind() == SketchPlugin_Sketch::ID())
432 aCanFillSketch = false;
434 // check plane or planar face of any non-sketch object
435 if (aCanFillSketch) {
436 std::shared_ptr<GeomAPI_Face> aGeomFace;
438 GeomShapePtr aGeomShape = thePrs->shape();
439 if ((!aGeomShape.get() || aGeomShape->isNull()) && aResult.get()) {
440 aGeomShape = aResult->shape();
443 if (aGeomShape.get() && aGeomShape->shapeType() == GeomAPI_Shape::FACE) {
444 std::shared_ptr<GeomAPI_Face> aGeomFace(new GeomAPI_Face(aGeomShape));
445 aCanFillSketch = aGeomFace.get() && aGeomFace->isPlanar();
448 aCanFillSketch = false;
450 return aCanFillSketch;
453 bool PartSet_WidgetSketchLabel::fillSketchPlaneBySelection(const ModuleBase_ViewerPrsPtr& thePrs)
455 bool isOwnerSet = false;
457 const GeomShapePtr& aShape = thePrs->shape();
458 std::shared_ptr<GeomAPI_Dir> aDir;
460 if (aShape.get() && !aShape->isNull()) {
461 const TopoDS_Shape& aTDShape = aShape->impl<TopoDS_Shape>();
462 aDir = setSketchPlane(aTDShape);
463 isOwnerSet = aDir.get();
465 if (thePrs->object() && (feature() != thePrs->object())) {
466 FeaturePtr aFeature = ModelAPI_Feature::feature(thePrs->object());
467 DataPtr aData = feature()->data();
468 AttributeSelectionPtr aSelAttr =
469 std::dynamic_pointer_cast<ModelAPI_AttributeSelection>
470 (aData->attribute(SketchPlugin_SketchEntity::EXTERNAL_ID()));
471 if (aSelAttr.get()) {
472 ResultPtr aRes = std::dynamic_pointer_cast<ModelAPI_Result>(thePrs->object());
474 GeomShapePtr aShapePtr;
475 if (!aShape.get() || aShape->isNull()) { // selection happens in the OCC viewer
476 aShapePtr = ModelAPI_Tools::shape(aRes);
478 else { // selection happens in OB browser
481 if (aShapePtr.get() && aShapePtr->isFace()) {
482 const TopoDS_Shape& aTDShape = aShapePtr->impl<TopoDS_Shape>();
483 setSketchPlane(aTDShape);
484 aSelAttr->setValue(aRes, aShapePtr);
489 aSelAttr->setValue(aFeature, GeomShapePtr());
490 GeomShapePtr aShape = aSelAttr->value();
491 if (!aShape.get() && aSelAttr->contextFeature().get() &&
492 aSelAttr->contextFeature()->firstResult().get()) {
493 aShape = aSelAttr->contextFeature()->firstResult()->shape();
495 if (aShape.get() && aShape->isPlanar()) {
496 const TopoDS_Shape& aTDShape = aShape->impl<TopoDS_Shape>();
497 setSketchPlane(aTDShape);
506 void PartSet_WidgetSketchLabel::activateCustom()
508 std::shared_ptr<GeomAPI_Pln> aPlane = plane();
510 myStackWidget->setCurrentIndex(1);
514 myStackWidget->setCurrentIndex(0);
515 bool aBodyIsVisualized = myPreviewPlanes->hasVisualizedBodies(myWorkshop);
517 // Clear previous selection mode It is necessary for correct activation of preview planes
518 XGUI_Workshop* aWorkshop = XGUI_Tools::workshop(myWorkshop);
519 XGUI_Displayer* aDisp = aWorkshop->displayer();
520 aWorkshop->selectionActivate()->activateObjects(QIntList(), aDisp->displayedObjects(), false);
522 if (!aBodyIsVisualized) {
523 // We have to select a plane before any operation
524 myPreviewPlanes->showPreviewPlanes(myWorkshop);
525 mySizeOfViewWidget->setVisible(true);
528 mySizeOfViewWidget->setVisible(false);
531 void PartSet_WidgetSketchLabel::deactivate()
533 ModuleBase_WidgetValidated::deactivate();
534 bool aHidePreview = myPreviewPlanes->isPreviewDisplayed();
535 myPreviewPlanes->erasePreviewPlanes(myWorkshop);
538 myWorkshop->viewer()->update();
541 void PartSet_WidgetSketchLabel::selectionModes(int& theModuleSelectionModes, QIntList& theModes)
543 theModuleSelectionModes = -1;
544 std::shared_ptr<GeomAPI_Pln> aPlane = plane();
546 theModes << TopAbs_FACE;
549 void PartSet_WidgetSketchLabel::selectionFilters(QIntList& theModuleSelectionFilters,
550 SelectMgr_ListOfFilter& theSelectionFilters)
552 std::shared_ptr<GeomAPI_Pln> aPlane = plane();
555 return ModuleBase_WidgetValidated::selectionFilters(theModuleSelectionFilters,
556 theSelectionFilters);
559 std::shared_ptr<GeomAPI_Dir>
560 PartSet_WidgetSketchLabel::setSketchPlane(const TopoDS_Shape& theShape)
562 if (theShape.IsNull())
563 return std::shared_ptr<GeomAPI_Dir>();
565 // get selected shape
566 std::shared_ptr<GeomAPI_Shape> aGShape(new GeomAPI_Shape);
567 aGShape->setImpl(new TopoDS_Shape(theShape));
569 // get plane parameters
570 std::shared_ptr<GeomAPI_Face> aFace(new GeomAPI_Face(aGShape));
571 std::shared_ptr<GeomAPI_Pln> aPlane = aFace->getPlane();
573 return std::shared_ptr<GeomAPI_Dir>();
574 return setSketchPlane(aPlane);
577 std::shared_ptr<GeomAPI_Dir>
578 PartSet_WidgetSketchLabel::setSketchPlane(std::shared_ptr<GeomAPI_Pln> thePlane)
580 // set plane parameters to feature
581 std::shared_ptr<ModelAPI_Data> aData = feature()->data();
582 double anA, aB, aC, aD;
583 thePlane->coefficients(anA, aB, aC, aD);
585 // calculate attributes of the sketch
586 std::shared_ptr<GeomAPI_Dir> aNormDir(new GeomAPI_Dir(anA, aB, aC));
587 std::shared_ptr<GeomAPI_XYZ> aCoords = aNormDir->xyz();
588 std::shared_ptr<GeomAPI_XYZ> aZero(new GeomAPI_XYZ(0, 0, 0));
589 aCoords = aCoords->multiplied(-aD * aCoords->distance(aZero));
590 std::shared_ptr<GeomAPI_Pnt> anOrigPnt(new GeomAPI_Pnt(aCoords));
591 // X axis is preferable to be dirX on the sketch
592 const double tol = Precision::Confusion();
593 bool isX = fabs(fabs(anA) - 1.0) < tol && fabs(aB) < tol && fabs(aC) < tol;
594 std::shared_ptr<GeomAPI_Dir> aTempDir(
595 isX ? new GeomAPI_Dir(0, 1, 0) : new GeomAPI_Dir(1, 0, 0));
596 std::shared_ptr<GeomAPI_Dir> aYDir(new GeomAPI_Dir(aNormDir->cross(aTempDir)));
597 std::shared_ptr<GeomAPI_Dir> aXDir(new GeomAPI_Dir(aYDir->cross(aNormDir)));
599 std::shared_ptr<GeomDataAPI_Point> anOrigin = std::dynamic_pointer_cast<GeomDataAPI_Point>(
600 aData->attribute(SketchPlugin_Sketch::ORIGIN_ID()));
601 anOrigin->setValue(anOrigPnt);
602 std::shared_ptr<GeomDataAPI_Dir> aNormal = std::dynamic_pointer_cast<GeomDataAPI_Dir>(
603 aData->attribute(SketchPlugin_Sketch::NORM_ID()));
604 aNormal->setValue(aNormDir);
605 std::shared_ptr<GeomDataAPI_Dir> aDirX = std::dynamic_pointer_cast<GeomDataAPI_Dir>(
606 aData->attribute(SketchPlugin_Sketch::DIRX_ID()));
607 aDirX->setValue(aXDir);
608 std::shared_ptr<GeomAPI_Dir> aDir = thePlane->direction();
612 void PartSet_WidgetSketchLabel::onSetPlaneView()
614 std::shared_ptr<GeomAPI_Pln> aPlane = plane();
616 std::shared_ptr<GeomAPI_Dir> aDirection = aPlane->direction();
617 gp_Dir aDir = aDirection->impl<gp_Dir>();
618 if (myViewInverted->isChecked())
620 myWorkshop->viewer()->setViewProjection(aDir.X(), aDir.Y(), aDir.Z(), 0.);
621 PartSet_Module* aModule = dynamic_cast<PartSet_Module*>(myWorkshop->module());
623 aModule->onViewTransformed();
628 //******************************************************
629 QList<std::shared_ptr<ModuleBase_ViewerPrs>> PartSet_WidgetSketchLabel::findCircularEdgesInPlane()
631 QList<std::shared_ptr<ModuleBase_ViewerPrs>> aResult;
632 XGUI_Workshop* aWorkshop = XGUI_Tools::workshop(myWorkshop);
633 XGUI_Displayer* aDisplayer = aWorkshop->displayer();
634 QObjectPtrList aDispObjects = aDisplayer->displayedObjects();
636 std::shared_ptr<GeomAPI_Pln> aPlane = plane();
637 foreach(ObjectPtr aObj, aDispObjects) {
638 ResultPtr aResObj = std::dynamic_pointer_cast<ModelAPI_Result>(aObj);
640 GeomShapePtr aShape = aResObj->shape();
642 GeomAPI_ShapeExplorer aExplorer(aShape, GeomAPI_Shape::EDGE);
643 for(; aExplorer.more(); aExplorer.next()) {
644 GeomShapePtr aEdgeShape = aExplorer.current();
645 GeomAPI_Edge anEdge(aEdgeShape);
646 if ((anEdge.isCircle() || anEdge.isArc() || anEdge.isEllipse()) &&
647 anEdge.isInPlane(aPlane)) {
648 bool isContains = false;
649 // Check that edge is not used.
650 // It is possible that the same edge will be taken from different faces
651 foreach(std::shared_ptr<ModuleBase_ViewerPrs> aPrs, aResult) {
652 GeomAPI_Edge aUsedEdge(aPrs->shape());
653 if (aUsedEdge.isEqual(aEdgeShape)) {
659 std::shared_ptr<ModuleBase_ViewerPrs>
660 aPrs(new ModuleBase_ViewerPrs(aResObj, aEdgeShape));
661 aResult.append(aPrs);
671 //******************************************************
672 void PartSet_WidgetSketchLabel::onChangePlane()
674 PartSet_Module* aModule = dynamic_cast<PartSet_Module*>(myWorkshop->module());
676 mySizeOfViewWidget->setVisible(false);
677 myRemoveExternal->setVisible(true);
678 myStackWidget->setCurrentIndex(0);
680 CompositeFeaturePtr aSketch = std::dynamic_pointer_cast<ModelAPI_CompositeFeature>(myFeature);
681 PartSet_Tools::nullifySketchPlane(aSketch);
683 Handle(SelectMgr_Filter) aFilter = aModule->selectionFilter(SF_SketchPlaneFilter);
684 if (!aFilter.IsNull()) {
685 std::shared_ptr<GeomAPI_Pln> aPln;
686 Handle(ModuleBase_ShapeInPlaneFilter)::DownCast(aFilter)->setPlane(aPln);
688 XGUI_Workshop* aWorkshop = aModule->getWorkshop();
690 aWorkshop->selectionActivate()->updateSelectionFilters();
691 aWorkshop->selectionActivate()->updateSelectionModes();
693 SessionPtr aMgr = ModelAPI_Session::get();
694 aMgr->startOperation();
695 myOpenTransaction = true;