1 // Copyright (C) 2014-20xx CEA/DEN, EDF R&D
3 #include "PartSet_SketcherReentrantMgr.h"
4 #include "PartSet_Module.h"
5 #include "PartSet_SketcherMgr.h"
6 #include "PartSet_WidgetPoint2d.h"
8 #include "ModelAPI_Session.h"
9 #include "ModelAPI_AttributeString.h"
10 #include "ModelAPI_AttributeRefAttr.h"
11 #include "ModelAPI_EventReentrantMessage.h"
13 #include "GeomDataAPI_Point2D.h"
15 #include <ModuleBase_IPropertyPanel.h>
16 #include <ModuleBase_OperationFeature.h>
17 #include <ModuleBase_ModelWidget.h>
18 #include <ModuleBase_ViewerPrs.h>
19 #include <ModuleBase_WidgetSelector.h>
20 #include <ModuleBase_PageWidget.h>
21 #include <ModuleBase_PageBase.h>
22 #include <ModuleBase_WidgetFactory.h>
23 #include <ModuleBase_OperationDescription.h>
24 #include "ModuleBase_ToolBox.h"
25 #include "ModuleBase_ISelection.h"
27 #include <SketchPlugin_Feature.h>
28 #include <SketchPlugin_Line.h>
29 #include <SketchPlugin_MacroArc.h>
30 #include <SketchPlugin_MacroCircle.h>
31 #include <SketchPlugin_Point.h>
32 #include <SketchPlugin_Trim.h>
34 #include <XGUI_Workshop.h>
35 #include <XGUI_ModuleConnector.h>
36 #include <XGUI_OperationMgr.h>
37 #include <XGUI_PropertyPanel.h>
38 #include <XGUI_ErrorMgr.h>
39 #include <XGUI_SelectionMgr.h>
41 #include <QToolButton>
43 //#define DEBUG_RESTART
45 PartSet_SketcherReentrantMgr::PartSet_SketcherReentrantMgr(ModuleBase_IWorkshop* theWorkshop)
46 : QObject(theWorkshop),
47 myWorkshop(theWorkshop),
48 myRestartingMode(RM_None),
49 myIsFlagsBlocked(false),
50 myIsInternalEditOperation(false),
51 myInternalActiveWidget(0),
52 myNoMoreWidgetsAttribute("")
56 PartSet_SketcherReentrantMgr::~PartSet_SketcherReentrantMgr()
60 ModuleBase_ModelWidget* PartSet_SketcherReentrantMgr::internalActiveWidget() const
62 ModuleBase_ModelWidget* aWidget = 0;
66 ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
68 ModuleBase_IPropertyPanel* aPanel = anOperation->propertyPanel();
69 if (aPanel) { // check for case when the operation is started but property panel is not filled
70 ModuleBase_ModelWidget* anActiveWidget = aPanel->activeWidget();
71 if (myIsInternalEditOperation && (!anActiveWidget || !anActiveWidget->isViewerSelector()))
72 aWidget = myInternalActiveWidget;
78 bool PartSet_SketcherReentrantMgr::isInternalEditActive() const
80 return myIsInternalEditOperation;
83 void PartSet_SketcherReentrantMgr::updateInternalEditActiveState()
85 if (myIsInternalEditOperation) {
86 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>
87 (myWorkshop->currentOperation());
89 FeaturePtr aFeature = aFOperation->feature();
90 QString anError = myWorkshop->module()->getFeatureError(aFeature);
91 // stop started internal edit operation as soon as the operation becomes invalid
92 // it is especially important for the sketch tangent arc feature
93 if (!anError.isEmpty()) {
94 aFOperation->setEditOperation(false);
95 //workshop()->operationMgr()->updateApplyOfOperations();
96 myIsInternalEditOperation = false;
97 updateAcceptAllAction();
103 bool PartSet_SketcherReentrantMgr::operationCommitted(ModuleBase_Operation* theOperation)
105 bool aProcessed = false;
109 aProcessed = myIsInternalEditOperation;
115 void PartSet_SketcherReentrantMgr::operationStarted(ModuleBase_Operation* theOperation)
120 if (myPreviousFeature.get() && myRestartingMode == RM_LastFeatureUsed) {
121 ModuleBase_OperationFeature* aCurrentOperation = dynamic_cast<ModuleBase_OperationFeature*>(
122 myWorkshop->currentOperation());
123 CompositeFeaturePtr aSketch = module()->sketchMgr()->activeSketch();
124 if (myPreviousFeature.get() && myPreviousFeature->data()->isValid()) // it is not removed
125 copyReetntrantAttributes(myPreviousFeature, aCurrentOperation->feature(), aSketch);
130 void PartSet_SketcherReentrantMgr::operationAborted(ModuleBase_Operation* theOperation)
138 bool PartSet_SketcherReentrantMgr::processMouseMoved(ModuleBase_IViewWindow* theWnd,
139 QMouseEvent* theEvent)
141 bool aProcessed = false;
145 if (myIsInternalEditOperation) {
146 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>
147 (myWorkshop->currentOperation());
148 FeaturePtr aLastFeature = myRestartingMode == RM_LastFeatureUsed ? aFOperation->feature()
151 ModuleBase_ModelWidget* anActiveWidget = module()->activeWidget();
152 ModuleBase_IPropertyPanel* aPanel = myWorkshop->currentOperation()->propertyPanel();
154 FeaturePtr aCurrentFeature = aFOperation->feature();
155 bool isLineFeature = false, isArcFeature = false;
156 std::string anAttributeOnStart;
157 if (aCurrentFeature->getKind() == SketchPlugin_Line::ID()) {
158 anAttributeOnStart = SketchPlugin_Line::START_ID();
159 isLineFeature = anActiveWidget->attributeID() == anAttributeOnStart;
161 else if (isTangentArc(aFOperation, module()->sketchMgr()->activeSketch())) {
162 anAttributeOnStart = SketchPlugin_MacroArc::TANGENT_POINT_ID();
163 isArcFeature = anActiveWidget->attributeID() == anAttributeOnStart;
165 bool aCanBeActivatedByMove = isLineFeature || isArcFeature;
166 if (aCanBeActivatedByMove) {
167 /// before restarting of operation we need to clear selection, as it may take part in
168 /// new feature creation, e.g. tangent arc. But it is not necessary as it was processed
169 /// by mouse release when the operation was restarted.
170 workshop()->selector()->clearSelection();
172 myPreviousFeature = aFOperation->feature();
174 myPreviousFeature = FeaturePtr();
176 anActiveWidget = module()->activeWidget();
177 aCurrentFeature = anActiveWidget->feature();
179 if (anActiveWidget->attributeID() == anAttributeOnStart) {
180 // it was not deactivated by preselection processing
181 aPanel->activateNextWidget(anActiveWidget);
184 // processing mouse move in active widget of restarted operation
185 ModuleBase_ModelWidget* anActiveWidget = module()->activeWidget();
186 PartSet_MouseProcessor* aProcessor = dynamic_cast<PartSet_MouseProcessor*>(anActiveWidget);
188 aProcessor->mouseMoved(theWnd, theEvent);
195 bool PartSet_SketcherReentrantMgr::processMousePressed(ModuleBase_IViewWindow* /* theWnd*/,
196 QMouseEvent* /* theEvent*/)
198 return isActiveMgr() && myIsInternalEditOperation;
201 bool PartSet_SketcherReentrantMgr::processMouseReleased(ModuleBase_IViewWindow* theWindow,
202 QMouseEvent* theEvent)
204 bool aProcessed = false;
208 if (myIsInternalEditOperation) {
209 ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
210 ModuleBase_IPropertyPanel* aPanel = anOperation->propertyPanel();
212 ModuleBase_ModelWidget* anActiveWidget = aPanel->activeWidget();
213 if (!anActiveWidget || !anActiveWidget->isViewerSelector()) {
215 // block of viewer update
216 // we need to block update content of the viewer because of Sketch Point feature
217 // in activate() the value of the point is initialized and it can be displayed
218 // but the default value is [0, 0]. So, we block update viewer contentent until
219 // onMouseRelease happens, which correct the point position
220 ModuleBase_Tools::blockUpdateViewer(true);
222 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>
223 (myWorkshop->currentOperation());
224 myPreviousFeature = aFOperation->feature();
226 /// selection should be obtained from workshop before ask if the operation can be started as
227 /// the canStartOperation method performs commit/abort of previous operation.
228 /// Sometimes commit/abort
229 /// may cause selection clear(Sketch operation) as a result
230 /// it will be lost and is not used for preselection.
231 ModuleBase_ISelection* aSelection = myWorkshop->selection();
232 QList<ModuleBase_ViewerPrsPtr> aPreSelected =
233 aSelection->getSelected(ModuleBase_ISelection::AllControls);
235 myClickedSketchPoint = PartSet_Tools::getPnt2d(theEvent, theWindow,
236 module()->sketchMgr()->activeSketch());
237 if (!aPreSelected.empty())
238 module()->getGeomSelection(aPreSelected.first(), mySelectedObject, mySelectedAttribute);
241 myClickedSketchPoint = std::shared_ptr<GeomAPI_Pnt2d>();
242 mySelectedObject = ObjectPtr();
243 mySelectedAttribute = AttributePtr();
245 myPreviousFeature = FeaturePtr();
248 // fill the first widget by the mouse event point
249 // if the active widget is not the first, it means that the restarted operation is filled by
250 // the current preselection.
251 PartSet_MouseProcessor* aMouseProcessor = dynamic_cast<PartSet_MouseProcessor*>(
252 module()->activeWidget());
253 //PartSet_WidgetPoint2D* aPoint2DWdg =
254 // dynamic_cast<PartSet_WidgetPoint2D*>(module()->activeWidget());
255 PartSet_MouseProcessor* aFirstWidget = dynamic_cast<PartSet_MouseProcessor*>(
256 aPanel->findFirstAcceptingValueWidget());
257 //if (aPoint2DWdg && aPoint2DWdg == aFirstWidget) {
258 if (aMouseProcessor && aMouseProcessor == aFirstWidget) {
259 std::shared_ptr<ModuleBase_ViewerPrs> aSelectedPrs;
260 if (!aPreSelected.empty())
261 aSelectedPrs = aPreSelected.front();
262 if (aSelectedPrs.get() && aSelectedPrs->object().get()
263 && !aSelectedPrs->object()->data()->isValid()) {
264 // the selected object was removed diring restart, e.g. presentable macro feature
265 // there are created objects to replace the object depending on created feature kind
266 aSelectedPrs = generatePreSelection();
268 aMouseProcessor->setPreSelection(aSelectedPrs, theWindow, theEvent);
269 //aPoint2DWdg->mouseReleased(theWindow, theEvent);
270 //if (!aPreSelected.empty())
271 // aPoint2DWdg->setPreSelection(ModuleBase_ViewerPrsPtr());
273 // unblock viewer update
274 ModuleBase_Tools::blockUpdateViewer(false);
280 //******************************************************
281 void PartSet_SketcherReentrantMgr::setReentrantPreSelection(
282 const std::shared_ptr<Events_Message>& theMessage)
284 ReentrantMessagePtr aReentrantMessage =
285 std::dynamic_pointer_cast<ModelAPI_EventReentrantMessage>(theMessage);
286 if (!aReentrantMessage.get())
289 aReentrantMessage->setSelectedObject(mySelectedObject);
290 aReentrantMessage->setSelectedAttribute(mySelectedAttribute);
291 aReentrantMessage->setClickedPoint(myClickedSketchPoint);
294 void PartSet_SketcherReentrantMgr::onWidgetActivated()
298 if (!myIsInternalEditOperation)
301 PartSet_Module* aModule = module();
302 ModuleBase_ModelWidget* aFirstWidget = aModule->activeWidget();
303 ModuleBase_IPropertyPanel* aPanel = aModule->currentOperation()->propertyPanel();
304 if (aFirstWidget != aPanel->activeWidget()) {
305 ModuleBase_WidgetSelector* aWSelector = dynamic_cast<ModuleBase_WidgetSelector*>(aFirstWidget);
307 aWSelector->activateSelectionAndFilters(true);
311 void PartSet_SketcherReentrantMgr::onNoMoreWidgets(const std::string& thePreviousAttributeID)
314 std::cout << "PartSet_SketcherReentrantMgr::onNoMoreWidgets" << std::endl;
320 // we should avoid processing of the signal about no more widgets attributes and
321 // do this after the restart operaion is finished if it was called
322 // onNoMoreWidgets depends on myIsFlagsBlocked and fill myNoMoreWidgetsAttribute
323 // if it should be called after restart
324 if (myIsFlagsBlocked) {
325 myNoMoreWidgetsAttribute = thePreviousAttributeID;
329 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>
330 (myWorkshop->currentOperation());
331 if (!myWorkshop->module()->getFeatureError(aFOperation->feature()).isEmpty())
334 if (aFOperation && module()->sketchMgr()->isNestedSketchOperation(aFOperation)) {
335 bool isStarted = false;
336 if (!module()->sketchMgr()->sketchSolverError()) {
337 if (myRestartingMode != RM_Forbided) {
338 myRestartingMode = RM_LastFeatureUsed;
339 isStarted = startInternalEdit(thePreviousAttributeID);
343 aFOperation->commit();
347 bool PartSet_SketcherReentrantMgr::processEnter(const std::string& thePreviousAttributeID)
354 // empty previous attribute means that the Apply/Ok button has focus and the enter
355 // should not lead to start edition mode of the previous operation
356 if (thePreviousAttributeID.empty())
359 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>
360 (myWorkshop->currentOperation());
361 if (!myWorkshop->module()->getFeatureError(aFOperation->feature()).isEmpty())
364 bool isSketchSolverError = module()->sketchMgr()->sketchSolverError();
366 if (!isSketchSolverError) {
367 myRestartingMode = RM_EmptyFeatureUsed;
368 isDone = startInternalEdit(thePreviousAttributeID);
374 void PartSet_SketcherReentrantMgr::onVertexSelected()
379 ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
380 std::string anOperationId = anOperation->id().toStdString();
381 if (anOperationId == SketchPlugin_Line::ID() ||
382 isTangentArc(anOperation, module()->sketchMgr()->activeSketch())) {
383 /// If last line finished on vertex the lines creation sequence has to be break
384 ModuleBase_IPropertyPanel* aPanel = anOperation->propertyPanel();
385 ModuleBase_ModelWidget* anActiveWidget = aPanel->activeWidget();
386 const QList<ModuleBase_ModelWidget*>& aWidgets = aPanel->modelWidgets();
387 QList<ModuleBase_ModelWidget*>::const_iterator anIt = aWidgets.begin(), aLast = aWidgets.end();
388 bool aFoundWidget = false;
389 bool aFoundObligatory = false;
390 for (; anIt != aLast && !aFoundObligatory; anIt++) {
392 aFoundWidget = *anIt == anActiveWidget;
394 aFoundObligatory = (*anIt)->isObligatory();
396 if (!aFoundObligatory)
397 myRestartingMode = RM_Forbided;
401 void PartSet_SketcherReentrantMgr::onAfterValuesChangedInPropertyPanel()
404 if (isInternalEditActive()) {
405 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>
406 (myWorkshop->currentOperation());
407 ModuleBase_ModelWidget* aWidget = (ModuleBase_ModelWidget*)sender();
408 if (!aWidget->isModifiedInEdit().empty())
413 void PartSet_SketcherReentrantMgr::onBeforeStopped()
415 if (!isActiveMgr() || !myIsInternalEditOperation)
418 beforeStopInternalEdit();
421 bool PartSet_SketcherReentrantMgr::canBeCommittedByPreselection()
423 return !isActiveMgr() || myRestartingMode == RM_None;
426 bool PartSet_SketcherReentrantMgr::isActiveMgr() const
428 ModuleBase_Operation* aCurrentOperation = myWorkshop->currentOperation();
430 bool anActive = PartSet_SketcherMgr::isSketchOperation(aCurrentOperation);
432 anActive = module()->sketchMgr()->isNestedSketchOperation(aCurrentOperation);
433 if (anActive) { // the manager is not active when the current operation is a usual Edit
434 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>
435 (myWorkshop->currentOperation());
436 if (aFOperation->isEditOperation())
437 anActive = myIsInternalEditOperation;
443 bool PartSet_SketcherReentrantMgr::startInternalEdit(const std::string& thePreviousAttributeID)
446 std::cout << "PartSet_SketcherReentrantMgr::startInternalEdit" << std::endl;
450 /// this is workaround for ModuleBase_WidgetEditor, used in SALOME mode. Sometimes key enter
451 /// event comes two times, so we should not start another internal edit operation
452 /// the Apply button becomes disabled becase the second additional internal feature is created
453 if (myIsInternalEditOperation)
456 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>
457 (myWorkshop->currentOperation());
459 if (aFOperation && module()->sketchMgr()->isNestedSketchOperation(aFOperation)) {
460 aFOperation->setEditOperation(true/*, false*/);
461 createInternalFeature();
463 myIsInternalEditOperation = true;
464 updateAcceptAllAction();
467 connect(aFOperation, SIGNAL(beforeCommitted()), this, SLOT(onBeforeStopped()));
468 connect(aFOperation, SIGNAL(beforeAborted()), this, SLOT(onBeforeStopped()));
470 // activate selection filters of the first widget in the viewer
473 // activate the last active widget in the Property Panel
474 if (!thePreviousAttributeID.empty()) {
475 ModuleBase_Operation* anEditOperation = module()->currentOperation();
476 if (anEditOperation) {
477 ModuleBase_IPropertyPanel* aPanel = aFOperation->propertyPanel();
478 ModuleBase_ModelWidget* aPreviousAttributeWidget = 0;
479 QList<ModuleBase_ModelWidget*> aWidgets = aPanel->modelWidgets();
480 for (int i = 0, aNb = aWidgets.size(); i < aNb && !aPreviousAttributeWidget; i++) {
481 if (aWidgets[i]->attributeID() == thePreviousAttributeID) {
482 /// workaround for the same attributes used in different stacked widgets(attribute types)
483 if (ModuleBase_ToolBox::isOffToolBoxParent(aWidgets[i]))
485 aPreviousAttributeWidget = aWidgets[i];
488 // If the current widget is a selector, do nothing, it processes the mouse press
489 if (aPreviousAttributeWidget) {
490 if (!aPreviousAttributeWidget->isViewerSelector()) {
491 aPreviousAttributeWidget->focusTo();
492 aPreviousAttributeWidget->selectContent();
495 // in case of shape multi selector, the widget does not lose focus by filling
496 // like it is in shape selector. So, if enter is pressed, the multi shape selector
497 // control should be deactivated. The focus is moved to Apply button and there
498 // should not be active control visualized in property panel
499 if (aPreviousAttributeWidget == aPanel->activeWidget()) {
500 aPanel->activateWidget(NULL, false);
502 // if there is no the next widget to be automatically activated,
503 // the Ok button in property
504 // panel should accept the focus(example is parallel constraint on sketch lines)
505 QToolButton* anOkBtn =
506 dynamic_cast<XGUI_PropertyPanel*>(aPanel)->findButton(PROP_PANEL_OK);
508 anOkBtn->setFocus(Qt::TabFocusReason);
515 module()->sketchMgr()->clearClickedFlags();
520 void PartSet_SketcherReentrantMgr::beforeStopInternalEdit()
522 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>
523 (myWorkshop->currentOperation());
525 disconnect(aFOperation, SIGNAL(beforeCommitted()), this, SLOT(onBeforeStopped()));
526 disconnect(aFOperation, SIGNAL(beforeAborted()), this, SLOT(onBeforeStopped()));
529 deleteInternalFeature();
532 void PartSet_SketcherReentrantMgr::restartOperation()
535 std::cout << "PartSet_SketcherReentrantMgr::restartOperation" << std::endl;
538 if (myIsInternalEditOperation) {
539 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>(
540 myWorkshop->currentOperation());
542 ModuleBase_ISelection* aSelection = myWorkshop->selection();
543 QList<ModuleBase_ViewerPrsPtr> aPreSelected =
544 aSelection->getSelected(ModuleBase_ISelection::AllControls);
548 if (myInternalFeature.get())
549 copyReetntrantAttributes(myInternalFeature, aFOperation->feature(),
550 module()->sketchMgr()->activeSketch());
552 myNoMoreWidgetsAttribute = "";
553 myIsFlagsBlocked = true;
554 module()->launchOperation(aFOperation->id());
555 myIsFlagsBlocked = false;
558 // we should avoid processing of the signal about no more widgets attributes and
559 // do this after the restart operaion is finished if it was called
560 // onNoMoreWidgets depends on myIsFlagsBlocked and fill myNoMoreWidgetsAttribute
561 // if it should be called after restart
562 if (!myNoMoreWidgetsAttribute.empty()) {
563 onNoMoreWidgets(myNoMoreWidgetsAttribute);
564 myNoMoreWidgetsAttribute = "";
570 void PartSet_SketcherReentrantMgr::createInternalFeature()
572 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>
573 (myWorkshop->currentOperation());
575 if (aFOperation && module()->sketchMgr()->isNestedSketchOperation(aFOperation)) {
576 FeaturePtr anOperationFeature = aFOperation->feature();
578 CompositeFeaturePtr aSketch = module()->sketchMgr()->activeSketch();
579 myInternalFeature = aSketch->addFeature(anOperationFeature->getKind());
582 std::cout << "PartSet_SketcherReentrantMgr::createInternalFeature: "
583 << myInternalFeature->data()->name() << std::endl;
586 bool isFeatureChanged = copyReetntrantAttributes(anOperationFeature, myInternalFeature,
588 XGUI_PropertyPanel* aPropertyPanel = dynamic_cast<XGUI_PropertyPanel*>
589 (aFOperation->propertyPanel());
591 myInternalWidget = new QWidget(aPropertyPanel->contentWidget()->pageWidget());
592 myInternalWidget->setVisible(false);
594 ModuleBase_PageWidget* anInternalPage = new ModuleBase_PageWidget(myInternalWidget);
596 QString aXmlRepr = aFOperation->getDescription()->xmlRepresentation();
597 ModuleBase_WidgetFactory aFactory(aXmlRepr.toStdString(), myWorkshop);
599 aFactory.createWidget(anInternalPage);
600 QList<ModuleBase_ModelWidget*> aWidgets = aFactory.getModelWidgets();
602 foreach (ModuleBase_ModelWidget* aWidget, aWidgets) {
603 bool isStoreValue = !aFOperation->isEditOperation() &&
604 !aWidget->getDefaultValue().empty() &&
605 !aWidget->isComputedDefault();
606 aWidget->setFeature(myInternalFeature, isStoreValue);
607 if (!isStoreValue && isFeatureChanged)
608 aWidget->restoreValue();
611 ModuleBase_ModelWidget* aFirstWidget = ModuleBase_IPropertyPanel::findFirstAcceptingValueWidget
614 myInternalActiveWidget = aFirstWidget;
618 void PartSet_SketcherReentrantMgr::deleteInternalFeature()
621 std::cout << "PartSet_SketcherReentrantMgr::deleteInternalFeature: "
622 << myInternalFeature->data()->name() << std::endl;
624 if (myInternalActiveWidget) {
625 ModuleBase_WidgetSelector* aWSelector =
626 dynamic_cast<ModuleBase_WidgetSelector*>(myInternalActiveWidget);
628 aWSelector->activateSelectionAndFilters(false);
629 myInternalActiveWidget = 0;
631 delete myInternalWidget;
632 myInternalWidget = 0;
634 QObjectPtrList anObjects;
635 anObjects.append(myInternalFeature);
636 workshop()->deleteFeatures(anObjects);
637 myInternalFeature = FeaturePtr();
640 void PartSet_SketcherReentrantMgr::resetFlags()
642 if (!myIsFlagsBlocked) {
643 myIsInternalEditOperation = false;
644 updateAcceptAllAction();
645 myRestartingMode = RM_None;
646 myReentrantMessage = std::shared_ptr<Events_Message>();
650 bool PartSet_SketcherReentrantMgr::copyReetntrantAttributes(const FeaturePtr& theSourceFeature,
651 const FeaturePtr& theNewFeature,
652 const CompositeFeaturePtr& theSketch,
653 const bool /*isTemporary*/)
655 bool aChanged = false;
656 if (!theSourceFeature.get() || !theSourceFeature->data().get() ||
657 !theSourceFeature->data()->isValid())
661 std::cout << "PartSet_SketcherReentrantMgr::copyReetntrantAttributes from '"
662 << theSourceFeature->data()->name() << "' to '" << theNewFeature->data()->name()
666 std::string aFeatureKind = theSourceFeature->getKind();
667 /*if (aFeatureKind == SketchPlugin_Line::ID()) {
668 // Initialize new line with first point equal to end of previous
669 std::shared_ptr<ModelAPI_Data> aSFData = theSourceFeature->data();
670 std::shared_ptr<GeomDataAPI_Point2D> aSPoint = std::dynamic_pointer_cast<GeomDataAPI_Point2D>(
671 aSFData->attribute(SketchPlugin_Line::END_ID()));
672 std::shared_ptr<ModelAPI_Data> aNFData = theNewFeature->data();
673 std::shared_ptr<GeomDataAPI_Point2D> aNPoint = std::dynamic_pointer_cast<GeomDataAPI_Point2D>(
674 aNFData->attribute(SketchPlugin_Line::START_ID()));
675 aNPoint->setValue(aSPoint->x(), aSPoint->y());
676 PartSet_Tools::createConstraint(theSketch, aSPoint, aNPoint);
678 aNPoint = std::dynamic_pointer_cast<GeomDataAPI_Point2D>(
679 aSFData->attribute(SketchPlugin_Line::END_ID()));
680 aNPoint->setValue(aSPoint->x(), aSPoint->y());
682 else*/ if (aFeatureKind == SketchPlugin_MacroCircle::ID()) {
684 /*std::string aTypeAttributeId = SketchPlugin_MacroCircle::CIRCLE_TYPE();
685 AttributeStringPtr aSourceFeatureTypeAttr = theSourceFeature->data()->string(aTypeAttributeId);
686 AttributeStringPtr aNewFeatureTypeAttr = theNewFeature->data()->string(aTypeAttributeId);
687 if (aNewFeatureTypeAttr->value() != aTypeAttributeId) // do nothing if there is no changes
688 aNewFeatureTypeAttr->setValue(aSourceFeatureTypeAttr->value());
689 //ModuleBase_Tools::flushUpdated(theNewFeature);
692 else if (aFeatureKind == SketchPlugin_MacroArc::ID()) {
694 std::string aTypeAttributeId = SketchPlugin_MacroArc::ARC_TYPE();
695 AttributeStringPtr aSourceFeatureTypeAttr = theSourceFeature->data()->string(aTypeAttributeId);
696 AttributeStringPtr aNewFeatureTypeAttr = theNewFeature->data()->string(aTypeAttributeId);
697 if (aNewFeatureTypeAttr->value() != aTypeAttributeId) // do nothing if there is no changes
698 aNewFeatureTypeAttr->setValue(aSourceFeatureTypeAttr->value());
699 //// if the arc is tangent, set coincidence to end point of the previous arc
700 //std::string anArcType = aSourceFeatureTypeAttr->value();
701 //if (anArcType == SketchPlugin_Arc::ARC_TYPE_TANGENT()) {
702 // // get the last point of the previuos arc feature(geom point 2d)
703 // std::shared_ptr<ModelAPI_Data> aSData = theSourceFeature->data();
704 // std::shared_ptr<GeomDataAPI_Point2D> aSPointAttr =
705 // std::dynamic_pointer_cast<GeomDataAPI_Point2D>(
706 // aSData->attribute(SketchPlugin_Arc::END_ID()));
707 // // get point attribute on the current feature
708 // AttributeRefAttrPtr aTangentPointAttr = theNewFeature->data()->refattr(
709 // SketchPlugin_Arc::TANGENT_POINT_ID());
710 // aTangentPointAttr->setAttr(aSPointAttr);
712 // std::shared_ptr<GeomDataAPI_Point2D> aNPointAttr =
713 // std::dynamic_pointer_cast<GeomDataAPI_Point2D>(
714 // theNewFeature->data()->attribute(SketchPlugin_Arc::END_ID()));
715 // aNPointAttr->setValue(aSPointAttr->x(), aSPointAttr->y());
718 //ModuleBase_Tools::flushUpdated(theNewFeature);
721 else if (aFeatureKind == SketchPlugin_Trim::ID()) {
722 /*std::shared_ptr<ModelAPI_AttributeReference> aRefSelectedAttr =
723 std::dynamic_pointer_cast<ModelAPI_AttributeReference>(
724 theSourceFeature->data()->attribute(SketchPlugin_Trim::SELECTED_OBJECT()));
725 std::shared_ptr<ModelAPI_AttributeReference> aNRefSelectedAttr =
726 std::dynamic_pointer_cast<ModelAPI_AttributeReference>(
727 theNewFeature->data()->attribute(SketchPlugin_Trim::SELECTED_OBJECT()));
728 aNRefSelectedAttr->setValue(aRefSelectedAttr->value());*/
730 std::shared_ptr<ModelAPI_AttributeReference> aRefPreviewAttr =
731 std::dynamic_pointer_cast<ModelAPI_AttributeReference>(
732 theSourceFeature->data()->attribute(SketchPlugin_Trim::PREVIEW_OBJECT()));
733 std::shared_ptr<ModelAPI_AttributeReference> aNRefPreviewAttr =
734 std::dynamic_pointer_cast<ModelAPI_AttributeReference>(
735 theNewFeature->data()->attribute(SketchPlugin_Trim::PREVIEW_OBJECT()));
736 aNRefPreviewAttr->setValue(aRefPreviewAttr->value());
738 /*std::shared_ptr<GeomDataAPI_Point2D> aPointSelectedAttr =
739 std::dynamic_pointer_cast<GeomDataAPI_Point2D>(
740 theSourceFeature->data()->attribute(SketchPlugin_Trim::SELECTED_POINT()));
741 std::shared_ptr<GeomDataAPI_Point2D> aNPointSelectedAttr =
742 std::dynamic_pointer_cast<GeomDataAPI_Point2D>(
743 theNewFeature->data()->attribute(SketchPlugin_Trim::SELECTED_POINT()));
744 aNPointSelectedAttr->setValue(aPointSelectedAttr->x(), aPointSelectedAttr->y());
746 std::shared_ptr<GeomDataAPI_Point2D> aPointPreviewAttr =
747 std::dynamic_pointer_cast<GeomDataAPI_Point2D>(
748 theSourceFeature->data()->attribute(SketchPlugin_Trim::PREVIEW_POINT()));
749 std::shared_ptr<GeomDataAPI_Point2D> aNPointPreviewAttr =
750 std::dynamic_pointer_cast<GeomDataAPI_Point2D>(
751 theNewFeature->data()->attribute(SketchPlugin_Trim::PREVIEW_POINT()));
752 aNPointPreviewAttr->setValue(aPointPreviewAttr->x(), aPointPreviewAttr->y());
759 bool PartSet_SketcherReentrantMgr::isTangentArc(ModuleBase_Operation* theOperation,
760 const CompositeFeaturePtr& /*theSketch*/) const
762 bool aTangentArc = false;
763 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>
765 if (aFOperation && module()->sketchMgr()->isNestedSketchOperation(aFOperation)) {
766 FeaturePtr aFeature = aFOperation->feature();
767 if (aFeature.get() && aFeature->getKind() == SketchPlugin_MacroArc::ID()) {
768 AttributeStringPtr aTypeAttr = aFeature->data()->string(SketchPlugin_MacroArc::ARC_TYPE());
769 std::string anArcType = aTypeAttr.get() ? aTypeAttr->value() : "";
770 aTangentArc = anArcType == SketchPlugin_MacroArc::ARC_TYPE_BY_TANGENT_EDGE();
776 std::shared_ptr<ModuleBase_ViewerPrs> PartSet_SketcherReentrantMgr::generatePreSelection()
778 std::shared_ptr<ModuleBase_ViewerPrs> aPrs;
783 void PartSet_SketcherReentrantMgr::updateAcceptAllAction()
785 CompositeFeaturePtr aSketch = module()->sketchMgr()->activeSketch();
787 workshop()->errorMgr()->updateAcceptAllAction(aSketch);
790 XGUI_Workshop* PartSet_SketcherReentrantMgr::workshop() const
792 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(myWorkshop);
793 return aConnector->workshop();
796 PartSet_Module* PartSet_SketcherReentrantMgr::module() const
798 return dynamic_cast<PartSet_Module*>(myWorkshop->module());