1 // Copyright (C) 2014-20xx CEA/DEN, EDF R&D
3 // File: PartSet_SketcherMgr.cpp
4 // Created: 19 Dec 2014
5 // Author: Vitaly SMETANNIKOV
7 #include "PartSet_SketcherMgr.h"
8 #include "PartSet_SketcherReentrantMgr.h"
9 #include "PartSet_Module.h"
10 #include "PartSet_MouseProcessor.h"
11 #include "PartSet_Tools.h"
12 #include "PartSet_WidgetSketchLabel.h"
13 #include "PartSet_WidgetEditor.h"
14 #include "PartSet_ResultSketchPrs.h"
15 #include "PartSet_ExternalPointsMgr.h"
17 #include <XGUI_ModuleConnector.h>
18 #include <XGUI_Displayer.h>
19 #include <XGUI_Workshop.h>
20 #include <XGUI_ContextMenuMgr.h>
21 #include <XGUI_Selection.h>
22 #include <XGUI_SelectionMgr.h>
23 #include <XGUI_ModuleConnector.h>
24 #include <XGUI_PropertyPanel.h>
25 #include <XGUI_ViewerProxy.h>
26 #include <XGUI_OperationMgr.h>
27 #include <XGUI_ErrorMgr.h>
28 #include <XGUI_Tools.h>
30 #include <ModuleBase_IPropertyPanel.h>
31 #include <ModuleBase_ISelection.h>
32 #include <ModuleBase_IViewer.h>
33 #include <ModuleBase_IWorkshop.h>
34 #include <ModuleBase_IViewWindow.h>
35 #include <ModuleBase_ModelWidget.h>
36 #include <ModuleBase_Operation.h>
37 #include <ModuleBase_OperationFeature.h>
38 #include <ModuleBase_Operation.h>
39 #include <ModuleBase_WidgetEditor.h>
40 #include <ModuleBase_ViewerPrs.h>
41 #include <ModuleBase_Tools.h>
42 #include <ModuleBase_ResultPrs.h>
44 #include <GeomDataAPI_Point2D.h>
46 #include <Events_Loop.h>
48 #include <SketchPlugin_Line.h>
49 #include <SketchPlugin_Sketch.h>
50 #include <SketchPlugin_Point.h>
51 #include <SketchPlugin_Arc.h>
52 #include <SketchPlugin_Circle.h>
53 #include <SketchPlugin_ConstraintLength.h>
54 #include <SketchPlugin_ConstraintDistance.h>
55 #include <SketchPlugin_ConstraintParallel.h>
56 #include <SketchPlugin_ConstraintPerpendicular.h>
57 #include <SketchPlugin_ConstraintRadius.h>
58 #include <SketchPlugin_ConstraintRigid.h>
59 #include <SketchPlugin_ConstraintHorizontal.h>
60 #include <SketchPlugin_ConstraintVertical.h>
61 #include <SketchPlugin_ConstraintEqual.h>
62 #include <SketchPlugin_ConstraintTangent.h>
63 #include <SketchPlugin_ConstraintCoincidence.h>
64 #include <SketchPlugin_Fillet.h>
65 #include <SketchPlugin_ConstraintMirror.h>
66 #include <SketchPlugin_ConstraintAngle.h>
67 #include <SketchPlugin_ConstraintCollinear.h>
68 #include <SketchPlugin_ConstraintMiddle.h>
69 #include <SketchPlugin_MultiRotation.h>
70 #include <SketchPlugin_MultiTranslation.h>
71 #include <SketchPlugin_IntersectionPoint.h>
73 #include <SketcherPrs_Tools.h>
75 #include <SelectMgr_IndexedMapOfOwner.hxx>
76 #include <StdSelect_BRepOwner.hxx>
78 //#include <AIS_DimensionSelectionMode.hxx>
79 #include <AIS_Shape.hxx>
80 #include <AIS_Dimension.hxx>
82 #include <ModelAPI_Events.h>
83 #include <ModelAPI_Session.h>
84 #include <ModelAPI_AttributeString.h>
86 #include <ModelAPI_Validator.h>
87 #include <ModelAPI_Tools.h>
89 #include <QMouseEvent>
90 #include <QApplication>
92 #include <QMessageBox>
93 #include <QMainWindow>
95 //#define DEBUG_DO_NOT_BY_ENTER
96 //#define DEBUG_SKETCHER_ENTITIES
97 //#define DEBUG_SKETCH_ENTITIES_ON_MOVE
99 //#define DEBUG_CURSOR
101 /// Fills attribute and result lists by the selected owner. In case if the attribute is found,
102 /// by the owner shape, it is put to the list. Otherwise if type of owner shape is edge,
103 /// put the function result as is to the list of results.
104 /// \param theOwner a viewer selected owner
105 /// \param theFeature a feature, where the attribute is searched
106 /// \param theSketch a current sketch
107 /// \param theSelectedAttribute an output list of attributes
108 /// \param theSelectedResults an output list of edge results
109 void getAttributesOrResults(const Handle(SelectMgr_EntityOwner)& theOwner,
110 const FeaturePtr& theFeature, const FeaturePtr& theSketch,
111 const ResultPtr& theResult,
112 std::set<AttributePtr>& theSelectedAttributes,
113 std::set<ResultPtr>& theSelectedResults,
114 TopTools_MapOfShape& theShapes)
116 Handle(StdSelect_BRepOwner) aBRepOwner = Handle(StdSelect_BRepOwner)::DownCast(theOwner);
117 if (aBRepOwner.IsNull())
119 Handle(AIS_InteractiveObject) anIO = Handle(AIS_InteractiveObject)::DownCast(
120 aBRepOwner->Selectable());
121 if (aBRepOwner->HasShape()) {
122 const TopoDS_Shape& aShape = aBRepOwner->Shape();
123 theShapes.Add(aShape);
124 TopAbs_ShapeEnum aShapeType = aShape.ShapeType();
125 if (aShapeType == TopAbs_VERTEX) {
126 AttributePtr aPntAttr = PartSet_Tools::findAttributeBy2dPoint(theFeature,
128 if (aPntAttr.get() != NULL)
129 theSelectedAttributes.insert(aPntAttr);
131 else if (aShapeType == TopAbs_EDGE &&
132 theSelectedResults.find(theResult) == theSelectedResults.end()) {
133 theSelectedResults.insert(theResult);
138 PartSet_SketcherMgr::PartSet_SketcherMgr(PartSet_Module* theModule)
139 : QObject(theModule), myModule(theModule), myIsEditLaunching(false), myIsDragging(false),
140 myDragDone(false), myIsMouseOverWindow(false),
141 myIsMouseOverViewProcessed(true), myPreviousUpdateViewerEnabled(true),
142 myIsPopupMenuActive(false), myExternalPointsMgr(0)
144 ModuleBase_IWorkshop* anIWorkshop = myModule->workshop();
145 ModuleBase_IViewer* aViewer = anIWorkshop->viewer();
147 myPreviousDrawModeEnabled = true;//aViewer->isSelectionEnabled();
149 connect(aViewer, SIGNAL(mousePress(ModuleBase_IViewWindow*, QMouseEvent*)),
150 this, SLOT(onMousePressed(ModuleBase_IViewWindow*, QMouseEvent*)));
152 connect(aViewer, SIGNAL(mouseRelease(ModuleBase_IViewWindow*, QMouseEvent*)),
153 this, SLOT(onMouseReleased(ModuleBase_IViewWindow*, QMouseEvent*)));
155 connect(aViewer, SIGNAL(mouseMove(ModuleBase_IViewWindow*, QMouseEvent*)),
156 this, SLOT(onMouseMoved(ModuleBase_IViewWindow*, QMouseEvent*)));
158 connect(aViewer, SIGNAL(mouseDoubleClick(ModuleBase_IViewWindow*, QMouseEvent*)),
159 this, SLOT(onMouseDoubleClick(ModuleBase_IViewWindow*, QMouseEvent*)));
161 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(anIWorkshop);
162 XGUI_Workshop* aWorkshop = aConnector->workshop();
163 connect(aWorkshop, SIGNAL(applicationStarted()), this, SLOT(onApplicationStarted()));
165 myIsConstraintsShown[PartSet_Tools::Geometrical] = true;
166 myIsConstraintsShown[PartSet_Tools::Dimensional] = true;
167 myIsConstraintsShown[PartSet_Tools::Expressions] = false;
170 PartSet_SketcherMgr::~PartSet_SketcherMgr()
172 if (!myPlaneFilter.IsNull())
173 myPlaneFilter.Nullify();
176 void PartSet_SketcherMgr::onEnterViewPort()
178 // 1. if the mouse over window, update the next flag. Do not perform update visibility of
179 // created feature because it should be done in onMouseMove(). Some widgets watch
180 // the mouse move and use the cursor position to update own values. If the presentaion is
181 // redisplayed before this update, the feature presentation jumps from reset value to current.
182 myIsMouseOverWindow = true;
184 #ifdef DEBUG_DO_NOT_BY_ENTER
188 if (canChangeCursor(getCurrentOperation())) {
189 QCursor* aCurrentCursor = QApplication::overrideCursor();
190 if (!aCurrentCursor || aCurrentCursor->shape() != Qt::CrossCursor) {
191 QApplication::setOverrideCursor(QCursor(Qt::CrossCursor));
193 qDebug("onEnterViewPort() : Qt::CrossCursor");
198 if (!isNestedCreateOperation(getCurrentOperation(), activeSketch()))
201 operationMgr()->onValidateOperation();
203 // we need change displayed state of the current operation feature
204 // if the feature is presentable, e.g. distance construction. It has no results, so workshop does
205 // not accept a signal about the result created. Nothing is shown until mouse is moved out/in view
206 // port. If the isDisplayed flag is true, the presentable feature is displayed as soon as the
207 // presentation becomes valid and redisplay happens
208 //ModuleBase_Operation* aOperation = getCurrentOperation();
209 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>
210 (getCurrentOperation());
212 FeaturePtr aFeature = aFOperation->feature();
213 if (aFeature.get() && aFeature->data()->isValid()) {
214 visualizeFeature(aFeature, aFOperation->isEditOperation(), canDisplayObject(aFeature), false);
219 void PartSet_SketcherMgr::onLeaveViewPort()
221 myIsMouseOverViewProcessed = false;
222 myIsMouseOverWindow = false;
224 #ifdef DEBUG_DO_NOT_BY_ENTER
228 if (canChangeCursor(getCurrentOperation())) {
229 QApplication::restoreOverrideCursor();
231 qDebug("onLeaveViewPort() : None");
235 if (!isNestedCreateOperation(getCurrentOperation(), activeSketch()))
238 // the method should be performed if the popup menu is called,
239 // the reset of the current widget should not happen
240 if (myIsPopupMenuActive)
243 // it is important to validate operation here only if sketch entity create operation is active
244 // because at this operation we reacts to the mouse leave/enter view port
245 operationMgr()->onValidateOperation();
247 // 2. if the mouse IS NOT over window, reset the active widget value and hide the presentation
248 ModuleBase_IWorkshop* aWorkshop = myModule->workshop();
249 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(aWorkshop);
250 XGUI_Displayer* aDisplayer = aConnector->workshop()->displayer();
251 // disable the viewer update in order to avoid visualization of redisplayed feature in viewer
252 // obtained after reset value
253 bool isEnableUpdateViewer = aDisplayer->enableUpdateViewer(false);
254 ModuleBase_ModelWidget* anActiveWidget = getActiveWidget();
256 anActiveWidget->reset();
258 // hides the presentation of the current operation feature
259 // the feature is to be erased here, but it is correct to call canDisplayObject because
260 // there can be additional check (e.g. editor widget in distance constraint)
261 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>
262 (getCurrentOperation());
264 FeaturePtr aFeature = aFOperation->feature();
265 visualizeFeature(aFeature, aFOperation->isEditOperation(), canDisplayObject(aFeature));
267 // we should update viewer after the presentation are hidden in the viewer
268 // otherwise the reset presentation(line) appears in the viewer(by quick move from viewer to PP)
269 aDisplayer->enableUpdateViewer(isEnableUpdateViewer);
273 //Temporary commented as we do not modify values in property panel
274 void PartSet_SketcherMgr::onBeforeValuesChangedInPropertyPanel()
276 if (!isNestedEditOperation(getCurrentOperation(), myModule->sketchMgr()->activeSketch()) ||
277 myModule->sketchReentranceMgr()->isInternalEditActive())
279 // it is necessary to save current selection in order to restore it after the values are modifed
280 storeSelection(ST_SelectAndHighlightType);
282 ModuleBase_IWorkshop* aWorkshop = myModule->workshop();
283 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(aWorkshop);
284 XGUI_Displayer* aDisplayer = aConnector->workshop()->displayer();
285 myPreviousUpdateViewerEnabled = aDisplayer->enableUpdateViewer(false);
288 void PartSet_SketcherMgr::onAfterValuesChangedInPropertyPanel()
290 if (!isNestedEditOperation(getCurrentOperation(), myModule->sketchMgr()->activeSketch()) ||
291 myModule->sketchReentranceMgr()->isInternalEditActive()) {
292 myModule->sketchReentranceMgr()->updateInternalEditActiveState();
295 // it is necessary to restore current selection in order to restore it after values are modified
297 myCurrentSelection.clear();
299 // 3. the flag to disable the update viewer should be set in order to avoid blinking in the
300 // viewer happens by deselect/select the modified objects. The flag should be restored after
301 // the selection processing. The update viewer should be also called.
302 ModuleBase_IWorkshop* aWorkshop = myModule->workshop();
303 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(aWorkshop);
304 XGUI_Displayer* aDisplayer = aConnector->workshop()->displayer();
305 aDisplayer->enableUpdateViewer(myPreviousUpdateViewerEnabled);
306 aDisplayer->updateViewer();
310 void PartSet_SketcherMgr::onMousePressed(ModuleBase_IViewWindow* theWnd, QMouseEvent* theEvent)
312 // Clear dragging mode
313 myIsDragging = false;
315 if (myModule->sketchReentranceMgr()->processMousePressed(theWnd, theEvent))
317 //get2dPoint(theWnd, theEvent, myClickedPoint);
318 if (!(theEvent->buttons() & Qt::LeftButton))
321 ModuleBase_IWorkshop* aWorkshop = myModule->workshop();
322 ModuleBase_IViewer* aViewer = aWorkshop->viewer();
323 if (!aViewer->canDragByMouse())
326 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>
327 (getCurrentOperation());
331 if (aFOperation->isEditOperation()) {
332 // If the current widget is a selector, do nothing, it processes the mouse press
333 ModuleBase_ModelWidget* anActiveWidget = getActiveWidget();
334 if(anActiveWidget && anActiveWidget->isViewerSelector()) {
339 // Use only for sketch operations
340 if (myCurrentSketch) {
341 if (!PartSet_Tools::sketchPlane(myCurrentSketch))
344 bool isSketcher = isSketchOperation(aFOperation);
345 bool isSketchOpe = isNestedSketchOperation(aFOperation);
347 // Avoid non-sketch operations
348 if ((!isSketchOpe) && (!isSketcher))
351 bool isEditing = aFOperation->isEditOperation();
353 // Ignore creation sketch operation
354 if ((!isSketcher) && (!isEditing))
357 Handle(AIS_InteractiveContext) aContext = aViewer->AISContext();
358 // Remember highlighted objects for editing
359 ModuleBase_ISelection* aSelect = aWorkshop->selection();
361 bool aHasShift = (theEvent->modifiers() & Qt::ShiftModifier);
362 storeSelection(aHasShift ? ST_SelectAndHighlightType : ST_HighlightType, myCurrentSelection);
364 if (myCurrentSelection.empty()) {
365 if (isSketchOpe && (!isSketcher))
366 // commit previous operation
367 if (!aFOperation->commit())
368 aFOperation->abort();
371 // Init flyout point for radius rotation
372 FeaturePtr aFeature = myCurrentSelection.begin().key();
374 get2dPoint(theWnd, theEvent, myCurrentPoint);
379 myPreviousDrawModeEnabled = aViewer->enableDrawMode(false);
381 if (aFeature.get() != NULL) {
382 std::shared_ptr<SketchPlugin_Feature> aSPFeature =
383 std::dynamic_pointer_cast<SketchPlugin_Feature>(aFeature);
384 if (aSPFeature.get() &&
385 (aSPFeature->getKind() == SketchPlugin_ConstraintRadius::ID() ||
386 aSPFeature->getKind() == SketchPlugin_ConstraintAngle::ID())) {
387 DataPtr aData = aSPFeature->data();
388 AttributePtr aAttr = aData->attribute(SketchPlugin_Constraint::FLYOUT_VALUE_PNT());
389 std::shared_ptr<GeomDataAPI_Point2D> aFPAttr =
390 std::dynamic_pointer_cast<GeomDataAPI_Point2D>(aAttr);
391 aFPAttr->setValue(myCurrentPoint.myCurX, myCurrentPoint.myCurY);
394 } else if (isSketchOpe && isEditing) {
395 // If selected another object commit current result
396 bool aPrevLaunchingState = myIsEditLaunching;
397 /// store editing state for Edit operation in order to do not clear highlight by restart
398 /// of edit operation.
399 /// Internal edit should not be stored as editing operation as the result will be a
400 /// creation operation, where previous selection should not be used(and will be cleared)
401 myIsEditLaunching = !myModule->sketchReentranceMgr()->isInternalEditActive();
402 aFOperation->commit();
407 myPreviousDrawModeEnabled = aViewer->enableDrawMode(false);
409 myIsEditLaunching = aPrevLaunchingState;
410 if (aFeature.get() != NULL) {
411 std::shared_ptr<SketchPlugin_Feature> aSPFeature =
412 std::dynamic_pointer_cast<SketchPlugin_Feature>(aFeature);
413 if (aSPFeature.get() &&
414 (aSPFeature->getKind() == SketchPlugin_ConstraintRadius::ID() ||
415 aSPFeature->getKind() == SketchPlugin_ConstraintAngle::ID())) {
416 DataPtr aData = aSPFeature->data();
417 AttributePtr aAttr = aData->attribute(SketchPlugin_Constraint::FLYOUT_VALUE_PNT());
418 std::shared_ptr<GeomDataAPI_Point2D> aFPAttr =
419 std::dynamic_pointer_cast<GeomDataAPI_Point2D>(aAttr);
420 aFPAttr->setValue(myCurrentPoint.myCurX, myCurrentPoint.myCurY);
427 void PartSet_SketcherMgr::onMouseReleased(ModuleBase_IViewWindow* theWnd, QMouseEvent* theEvent)
429 bool aWasDragging = myIsDragging;
430 myIsDragging = false;
432 if (myModule->sketchReentranceMgr()->processMouseReleased(theWnd, theEvent))
435 // if mouse is pressed when it was over view and at release the mouse is out of view, do nothing
436 if (!myIsMouseOverViewProcessed)
439 ModuleBase_IWorkshop* aWorkshop = myModule->workshop();
440 ModuleBase_IViewer* aViewer = aWorkshop->viewer();
441 if (!aViewer->canDragByMouse())
443 ModuleBase_Operation* aOp = getCurrentOperation();
445 if (isNestedSketchOperation(aOp)) {
446 // Only for sketcher operations
449 /// the previous selection is lost by mouse release in the viewer(Select method), but
450 /// it is still stored in myCurrentSelection. So, it is possible to restore selection
451 /// It is important for drag(edit with mouse) of sketch entities.
452 restoreSelection(myCurrentSelection);
453 myCurrentSelection.clear();
459 aWorkshop->viewer()->enableDrawMode(myPreviousDrawModeEnabled);
461 ModuleBase_ModelWidget* anActiveWidget = getActiveWidget();
462 PartSet_MouseProcessor* aProcessor = dynamic_cast<PartSet_MouseProcessor*>(anActiveWidget);
464 aProcessor->mouseReleased(theWnd, theEvent);
467 void PartSet_SketcherMgr::onMouseMoved(ModuleBase_IViewWindow* theWnd, QMouseEvent* theEvent)
469 #ifdef DEBUG_SKETCH_ENTITIES_ON_MOVE
470 CompositeFeaturePtr aSketch = activeSketch();
472 std::cout << "mouse move SKETCH FEATURES [" << aSketch->numberOfSubs() << "]:" << std::endl;
474 for (int i = 0, aNbSubs = aSketch->numberOfSubs(); i < aNbSubs; i++) {
475 //std::cout << getFeatureInfo(aSketch->subFeature(i), false) << std::endl;
476 anInfo.append(ModuleBase_Tools::objectInfo(aSketch->subFeature(i)));
478 QString anInfoStr = anInfo.join("\n");
479 qDebug(QString("%1").arg(anInfo.size()).arg(anInfoStr).toStdString().c_str());
483 if (myModule->sketchReentranceMgr()->processMouseMoved(theWnd, theEvent))
486 if (isNestedCreateOperation(getCurrentOperation(), activeSketch())) {
487 // 1. perform the widget mouse move functionality and display the presentation
488 // the mouse move should be processed in the widget, if it can in order to visualize correct
489 // presentation. These widgets correct the feature attribute according to the mouse position
490 ModuleBase_ModelWidget* anActiveWidget = myModule->activeWidget();
491 PartSet_MouseProcessor* aProcessor = dynamic_cast<PartSet_MouseProcessor*>(anActiveWidget);
493 aProcessor->mouseMoved(theWnd, theEvent);
494 if (!myIsMouseOverViewProcessed) {
495 myIsMouseOverViewProcessed = true;
497 // the feature is to be erased here, but it is correct to call canDisplayObject because
498 // there can be additional check (e.g. editor widget in distance constraint)
499 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>
500 (getCurrentOperation());
502 FeaturePtr aFeature = aFOperation->feature();
503 visualizeFeature(aFeature, aFOperation->isEditOperation(), canDisplayObject(aFeature));
507 //myClickedPoint.clear();
510 // 1. the current selection is saved in the mouse press method in order to restore it after
512 // 2. the enable selection in the viewer should be temporary switched off in order to ignore
513 // mouse press signal in the viewer(it call Select for AIS context and the dragged objects are
514 // deselected). This flag should be restored in the slot, processed the mouse release signal.
516 ModuleBase_Operation* aCurrentOperation = getCurrentOperation();
517 if (!aCurrentOperation)
519 if (isSketchOperation(aCurrentOperation))
520 return; // No edit operation activated
522 Handle(V3d_View) aView = theWnd->v3dView();
523 gp_Pnt aPoint = PartSet_Tools::convertClickToPoint(theEvent->pos(), aView);
525 get2dPoint(theWnd, theEvent, aMousePnt);
527 std::shared_ptr<GeomAPI_Pnt2d> anOriginalPosition = std::shared_ptr<GeomAPI_Pnt2d>(
528 new GeomAPI_Pnt2d(myCurrentPoint.myCurX, myCurrentPoint.myCurY));
529 std::shared_ptr<GeomAPI_Pnt2d> aCurrentPosition = std::shared_ptr<GeomAPI_Pnt2d>(
530 new GeomAPI_Pnt2d(aMousePnt.myCurX, aMousePnt.myCurY));
532 ModuleBase_IWorkshop* aWorkshop = myModule->workshop();
533 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(aWorkshop);
534 XGUI_Displayer* aDisplayer = aConnector->workshop()->displayer();
535 // 3. the flag to disable the update viewer should be set in order to avoid blinking in the
536 // viewer happens by deselect/select the modified objects. The flag should be restored after
537 // the selection processing. The update viewer should be also called.
538 bool isEnableUpdateViewer = aDisplayer->enableUpdateViewer(false);
540 static Events_ID aMoveEvent = Events_Loop::eventByName(EVENT_OBJECT_MOVED);
541 //static Events_ID aUpdateEvent = Events_Loop::eventByName(EVENT_OBJECT_UPDATED);
542 FeatureToSelectionMap::const_iterator anIt = myCurrentSelection.begin(),
543 aLast = myCurrentSelection.end();
544 // 4. the features and attributes modification(move)
545 bool isModified = false;
546 for (; anIt != aLast; anIt++) {
547 FeaturePtr aFeature = anIt.key();
549 std::set<AttributePtr> anAttributes = anIt.value().myAttributes;
550 // Process selection by attribute: the priority to the attribute
551 if (!anAttributes.empty()) {
552 std::set<AttributePtr>::const_iterator anAttIt = anAttributes.begin(),
553 anAttLast = anAttributes.end();
554 for (; anAttIt != anAttLast; anAttIt++) {
555 AttributePtr anAttr = *anAttIt;
556 if (anAttr.get() == NULL)
558 std::string aAttrId = anAttr->id();
559 DataPtr aData = aFeature->data();
560 if (aData->isValid()) {
561 std::shared_ptr<GeomDataAPI_Point2D> aPoint =
562 std::dynamic_pointer_cast<GeomDataAPI_Point2D>(aData->attribute(aAttrId));
563 if (aPoint.get() != NULL) {
564 bool isImmutable = aPoint->setImmutable(true);
566 std::shared_ptr<ModelAPI_ObjectMovedMessage> aMessage = std::shared_ptr
567 <ModelAPI_ObjectMovedMessage>(new ModelAPI_ObjectMovedMessage(this));
568 aMessage->setMovedAttribute(aPoint);
569 aMessage->setOriginalPosition(anOriginalPosition);
570 aMessage->setCurrentPosition(aCurrentPosition);
571 Events_Loop::loop()->send(aMessage);
574 aPoint->setImmutable(isImmutable);
579 // Process selection by feature
580 std::shared_ptr<SketchPlugin_Feature> aSketchFeature =
581 std::dynamic_pointer_cast<SketchPlugin_Feature>(aFeature);
582 if (aSketchFeature) {
583 std::shared_ptr<ModelAPI_ObjectMovedMessage> aMessage = std::shared_ptr
584 <ModelAPI_ObjectMovedMessage>(new ModelAPI_ObjectMovedMessage(this));
585 aMessage->setMovedObject(aFeature);
586 aMessage->setOriginalPosition(anOriginalPosition);
587 aMessage->setCurrentPosition(aCurrentPosition);
588 Events_Loop::loop()->send(aMessage);
593 // the modified state of the current operation should be updated if there are features, which
596 aCurrentOperation->onValuesChanged();
597 Events_Loop::loop()->flush(aMoveEvent); // up all move events - to be processed in the solver
599 //Events_Loop::loop()->flush(aUpdateEvent); // up update events - to redisplay presentations
601 // 5. it is necessary to save current selection in order to restore it after the features moving
602 restoreSelection(myCurrentSelection);
603 // 6. restore the update viewer flag and call this update
604 aDisplayer->enableUpdateViewer(isEnableUpdateViewer);
605 aDisplayer->updateViewer();
608 myCurrentPoint = aMousePnt;
612 void PartSet_SketcherMgr::onMouseDoubleClick(ModuleBase_IViewWindow* theWnd, QMouseEvent* theEvent)
614 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>
615 (getCurrentOperation());
616 if (aFOperation && aFOperation->isEditOperation()) {
617 std::string aId = aFOperation->id().toStdString();
618 if (isDistanceOperation(aFOperation))
620 // Activate dimension value editing on double click
621 ModuleBase_IPropertyPanel* aPanel = aFOperation->propertyPanel();
622 QList<ModuleBase_ModelWidget*> aWidgets = aPanel->modelWidgets();
623 // Find corresponded widget to activate value editing
624 foreach (ModuleBase_ModelWidget* aWgt, aWidgets) {
625 if (aWgt->attributeID() == SketchPlugin_Constraint::VALUE() ||
626 aWgt->attributeID() == SketchPlugin_ConstraintAngle::ANGLE_VALUE_ID()) {
627 PartSet_WidgetEditor* anEditor = dynamic_cast<PartSet_WidgetEditor*>(aWgt);
629 anEditor->showPopupEditor();
637 void PartSet_SketcherMgr::onApplicationStarted()
639 ModuleBase_IWorkshop* anIWorkshop = myModule->workshop();
640 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(anIWorkshop);
641 XGUI_Workshop* aWorkshop = aConnector->workshop();
642 PartSet_SketcherReentrantMgr* aReentranceMgr = myModule->sketchReentranceMgr();
644 XGUI_PropertyPanel* aPropertyPanel = aWorkshop->propertyPanel();
645 if (aPropertyPanel) {
646 //connect(aPropertyPanel, SIGNAL(beforeWidgetActivated(ModuleBase_ModelWidget*)),
647 // this, SLOT(onBeforeWidgetActivated(ModuleBase_ModelWidget*)));
649 connect(aPropertyPanel, SIGNAL(noMoreWidgets(const std::string&)),
650 aReentranceMgr, SLOT(onNoMoreWidgets(const std::string&)));
651 connect(aPropertyPanel, SIGNAL(widgetActivated(ModuleBase_ModelWidget*)),
652 aReentranceMgr, SLOT(onWidgetActivated()));
655 XGUI_ViewerProxy* aViewerProxy = aWorkshop->viewer();
656 connect(aViewerProxy, SIGNAL(enterViewPort()), this, SLOT(onEnterViewPort()));
657 connect(aViewerProxy, SIGNAL(leaveViewPort()), this, SLOT(onLeaveViewPort()));
659 XGUI_ContextMenuMgr* aContextMenuMgr = aWorkshop->contextMenuMgr();
660 connect(aContextMenuMgr, SIGNAL(beforeContextMenu()), this, SLOT(onBeforeContextMenu()));
661 connect(aContextMenuMgr, SIGNAL(afterContextMenu()), this, SLOT(onAfterContextMenu()));
664 //void PartSet_SketcherMgr::onBeforeWidgetActivated(ModuleBase_ModelWidget* theWidget)
666 //if (!myClickedPoint.myIsInitialized)
669 //ModuleBase_Operation* aOperation = getCurrentOperation();
670 // the distance constraint feature should not use the clickedd point
671 // this is workaround in order to don't throw down the flyout point value,
672 // set by execute() method of these type of features
673 //if (isDistanceOperation(aOperation))
676 //PartSet_WidgetPoint2D* aPnt2dWgt = dynamic_cast<PartSet_WidgetPoint2D*>(theWidget);
678 // aPnt2dWgt->setPoint(myClickedPoint.myCurX, myClickedPoint.myCurY);
682 void PartSet_SketcherMgr::onBeforeContextMenu()
684 myIsPopupMenuActive = true;
687 void PartSet_SketcherMgr::onAfterContextMenu()
689 myIsPopupMenuActive = false;
692 void PartSet_SketcherMgr::get2dPoint(ModuleBase_IViewWindow* theWnd, QMouseEvent* theEvent,
695 Handle(V3d_View) aView = theWnd->v3dView();
696 gp_Pnt aPoint = PartSet_Tools::convertClickToPoint(theEvent->pos(), aView);
698 PartSet_Tools::convertTo2D(aPoint, myCurrentSketch, aView, aX, anY);
699 thePoint.setValue(aX, anY);
702 void PartSet_SketcherMgr::launchEditing()
704 if (!myCurrentSelection.empty()) {
705 FeaturePtr aFeature = myCurrentSelection.begin().key();
706 std::shared_ptr<SketchPlugin_Feature> aSPFeature =
707 std::dynamic_pointer_cast<SketchPlugin_Feature>(aFeature);
708 if (aSPFeature && (!aSPFeature->isExternal())) {
709 myModule->editFeature(aSPFeature);
714 bool PartSet_SketcherMgr::sketchSolverError()
716 bool anError = false;
717 CompositeFeaturePtr aSketch = activeSketch();
719 AttributeStringPtr aAttributeString = aSketch->string(SketchPlugin_Sketch::SOLVER_ERROR());
720 anError = !aAttributeString->value().empty();
725 QString PartSet_SketcherMgr::getFeatureError(const FeaturePtr& theFeature)
728 if (!theFeature.get() || !theFeature->data()->isValid())
731 CompositeFeaturePtr aSketch = activeSketch();
732 if (aSketch.get() && aSketch == theFeature) {
733 std::string aSolverError = aSketch->string(SketchPlugin_Sketch::SOLVER_ERROR())->value();
734 anError = ModuleBase_Tools::translate(aSketch->getKind(), aSolverError);
739 void PartSet_SketcherMgr::clearClickedFlags()
741 //myClickedPoint.clear();
742 myCurrentPoint.clear();
745 const QStringList& PartSet_SketcherMgr::replicationsIdList()
747 static QStringList aReplicationIds;
748 if (aReplicationIds.size() == 0) {
749 aReplicationIds << SketchPlugin_ConstraintMirror::ID().c_str();
750 aReplicationIds << SketchPlugin_MultiRotation::ID().c_str();
751 aReplicationIds << SketchPlugin_MultiTranslation::ID().c_str();
753 return aReplicationIds;
756 const QStringList& PartSet_SketcherMgr::constraintsIdList()
758 static QStringList aConstraintIds;
759 if (aConstraintIds.size() == 0) {
760 aConstraintIds << SketchPlugin_ConstraintLength::ID().c_str();
761 aConstraintIds << SketchPlugin_ConstraintDistance::ID().c_str();
762 aConstraintIds << SketchPlugin_ConstraintRigid::ID().c_str();
763 aConstraintIds << SketchPlugin_ConstraintRadius::ID().c_str();
764 aConstraintIds << SketchPlugin_ConstraintPerpendicular::ID().c_str();
765 aConstraintIds << SketchPlugin_ConstraintParallel::ID().c_str();
766 aConstraintIds << SketchPlugin_ConstraintHorizontal::ID().c_str();
767 aConstraintIds << SketchPlugin_ConstraintVertical::ID().c_str();
768 aConstraintIds << SketchPlugin_ConstraintEqual::ID().c_str();
769 aConstraintIds << SketchPlugin_ConstraintTangent::ID().c_str();
770 aConstraintIds << SketchPlugin_ConstraintCoincidence::ID().c_str();
771 aConstraintIds << SketchPlugin_ConstraintAngle::ID().c_str();
772 aConstraintIds << SketchPlugin_ConstraintCollinear::ID().c_str();
773 aConstraintIds << SketchPlugin_ConstraintMiddle::ID().c_str();
774 aConstraintIds << SketchPlugin_ConstraintMirror::ID().c_str();
775 aConstraintIds << SketchPlugin_MultiTranslation::ID().c_str();
776 aConstraintIds << SketchPlugin_MultiRotation::ID().c_str();
778 return aConstraintIds;
781 void PartSet_SketcherMgr::sketchSelectionModes(QIntList& theModes)
785 theModes.append(SketcherPrs_Tools::Sel_Dimension_Text);
786 theModes.append(SketcherPrs_Tools::Sel_Dimension_Line);
787 theModes.append(SketcherPrs_Tools::Sel_Constraint);
788 theModes.append(TopAbs_VERTEX);
789 theModes.append(TopAbs_EDGE);
792 Handle(AIS_InteractiveObject) PartSet_SketcherMgr::createPresentation(const ResultPtr& theResult)
794 Handle(AIS_InteractiveObject) aPrs;
796 FeaturePtr aFeature = ModelAPI_Feature::feature(theResult);
797 if (aFeature.get() && aFeature->getKind() == SketchPlugin_Sketch::ID()) {
798 aPrs = new PartSet_ResultSketchPrs(theResult);
803 bool PartSet_SketcherMgr::isSketchOperation(ModuleBase_Operation* theOperation)
805 return theOperation && theOperation->id().toStdString() == SketchPlugin_Sketch::ID();
808 bool PartSet_SketcherMgr::isNestedSketchOperation(ModuleBase_Operation* theOperation) const
810 bool aNestedSketch = false;
812 FeaturePtr anActiveSketch = activeSketch();
813 if (anActiveSketch.get() && theOperation) {
814 ModuleBase_Operation* aSketchOperation = operationMgr()->findOperation(
815 anActiveSketch->getKind().c_str());
816 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>
818 if (aSketchOperation && aFOperation) {
819 FeaturePtr aFeature = aFOperation->feature();
820 if (aFeature.get()) {
821 QStringList aGrantedOpIds = aSketchOperation->grantedOperationIds();
822 aNestedSketch = aGrantedOpIds.contains(aFeature->getKind().c_str());
826 return aNestedSketch;
829 bool PartSet_SketcherMgr::isNestedSketchFeature(const QString& theFeatureKind) const
831 bool aNestedSketch = false;
833 FeaturePtr anActiveSketch = activeSketch();
834 if (anActiveSketch.get()) {
835 ModuleBase_Operation* aSketchOperation = operationMgr()->findOperation(
836 anActiveSketch->getKind().c_str());
837 if (aSketchOperation) {
838 QStringList aGrantedOpIds = aSketchOperation->grantedOperationIds();
839 aNestedSketch = aGrantedOpIds.contains(theFeatureKind);
842 return aNestedSketch;
845 bool PartSet_SketcherMgr::isNestedCreateOperation(ModuleBase_Operation* theOperation,
846 const CompositeFeaturePtr& theSketch) const
848 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>
850 return aFOperation && !aFOperation->isEditOperation() &&
851 isNestedSketchOperation(aFOperation);
854 bool PartSet_SketcherMgr::isNestedEditOperation(ModuleBase_Operation* theOperation,
855 const CompositeFeaturePtr& theSketch) const
857 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>
859 return aFOperation && aFOperation->isEditOperation() &&
860 isNestedSketchOperation(aFOperation);
863 bool PartSet_SketcherMgr::isEntity(const std::string& theId)
865 return (theId == SketchPlugin_Line::ID()) ||
866 (theId == SketchPlugin_Point::ID()) ||
867 (theId == SketchPlugin_Arc::ID()) ||
868 (theId == SketchPlugin_Circle::ID());
871 bool PartSet_SketcherMgr::isExternalFeature(const FeaturePtr& theFeature)
873 std::shared_ptr<SketchPlugin_Feature> aSPFeature =
874 std::dynamic_pointer_cast<SketchPlugin_Feature>(theFeature);
875 return aSPFeature.get() && aSPFeature->isExternal();
878 bool PartSet_SketcherMgr::isDistanceOperation(ModuleBase_Operation* theOperation)
880 std::string anId = theOperation ? theOperation->id().toStdString() : "";
882 return isDistanceKind(anId);
885 bool PartSet_SketcherMgr::isDistanceKind(std::string& theKind)
887 return (theKind == SketchPlugin_ConstraintLength::ID()) ||
888 (theKind == SketchPlugin_ConstraintDistance::ID()) ||
889 (theKind == SketchPlugin_ConstraintRadius::ID()) ||
890 (theKind == SketchPlugin_ConstraintAngle::ID());
893 void PartSet_SketcherMgr::startSketch(ModuleBase_Operation* theOperation)
895 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>
896 (getCurrentOperation());
900 myModule->onViewTransformed();
902 // Display all sketcher sub-Objects
903 myCurrentSketch = std::dynamic_pointer_cast<ModelAPI_CompositeFeature>(aFOperation->feature());
904 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(myModule->workshop());
906 // Hide sketcher result
907 std::list<ResultPtr> aResults = myCurrentSketch->results();
908 std::list<ResultPtr>::const_iterator aIt;
909 for (aIt = aResults.begin(); aIt != aResults.end(); ++aIt) {
910 (*aIt)->setDisplayed(false);
912 myCurrentSketch->setDisplayed(false);
914 // Remove invalid sketch entities
915 std::set<FeaturePtr> anInvalidFeatures;
916 ModelAPI_ValidatorsFactory* aFactory = ModelAPI_Session::get()->validators();
917 for (int i = 0; i < myCurrentSketch->numberOfSubs(); i++) {
918 FeaturePtr aFeature = myCurrentSketch->subFeature(i);
919 if (aFeature.get()) {
920 if (!aFactory->validate(aFeature))
921 anInvalidFeatures.insert(aFeature);
924 if (!anInvalidFeatures.empty()) {
925 std::map<FeaturePtr, std::set<FeaturePtr> > aReferences;
926 ModelAPI_Tools::findAllReferences(anInvalidFeatures, aReferences, false);
928 std::set<FeaturePtr>::const_iterator anIt = anInvalidFeatures.begin(),
929 aLast = anInvalidFeatures.end();
930 // separate features to references to parameter features and references to others
931 QStringList anInvalidFeatureNames;
932 for (; anIt != aLast; anIt++) {
933 FeaturePtr aFeature = *anIt;
935 anInvalidFeatureNames.append(aFeature->name().c_str());
937 std::string aPrefixInfo = QString("Invalid features of the sketch will be deleted: %1.\n\n").
938 arg(anInvalidFeatureNames.join(", ")).toStdString().c_str();
939 std::set<FeaturePtr> aFeatureRefsToDelete;
940 if (ModuleBase_Tools::askToDelete(anInvalidFeatures, aReferences, aConnector->desktop(),
941 aFeatureRefsToDelete, aPrefixInfo)) {
942 if (!aFeatureRefsToDelete.empty())
943 anInvalidFeatures.insert(aFeatureRefsToDelete.begin(), aFeatureRefsToDelete.end());
944 ModelAPI_Tools::removeFeatures(anInvalidFeatures, true);
945 Events_Loop::loop()->flush(Events_Loop::eventByName(EVENT_OBJECT_UPDATED));
946 // TODO: call the next method in the XGUI_OperationMgr::onOperationStarted().
947 workshop()->errorMgr()->updateAcceptAllAction(myCurrentSketch);
951 // update state of overconstraint listener should be done before sketch features/results
952 // display (as the display will ask custom color from the listener)
953 myModule->overconstraintListener()->setActive(true);
954 // Display sketcher objects
956 Events_ID EVENT_DISP = Events_Loop::loop()->eventByName(EVENT_OBJECT_TO_REDISPLAY);
957 const ModelAPI_EventCreator* aECreator = ModelAPI_EventCreator::get();
958 for (int i = 0; i < myCurrentSketch->numberOfSubs(); i++) {
959 FeaturePtr aFeature = myCurrentSketch->subFeature(i);
960 #ifdef DEBUG_SKETCHER_ENTITIES
961 anInfo.append(ModuleBase_Tools::objectInfo(aFeature));
963 std::list<ResultPtr> aResults = aFeature->results();
964 std::list<ResultPtr>::const_iterator aIt;
965 for (aIt = aResults.begin(); aIt != aResults.end(); ++aIt) {
966 if ((*aIt)->isDisplayed())
967 // Display object if it was created outside of GUI
968 aECreator->sendUpdated((*aIt), EVENT_DISP);
970 (*aIt)->setDisplayed(true);
972 if (aFeature->isDisplayed())
973 aECreator->sendUpdated(aFeature, EVENT_DISP);
975 aFeature->setDisplayed(true);
977 #ifdef DEBUG_SKETCHER_ENTITIES
978 QString anInfoStr = anInfo.join(";\t");
979 qDebug(QString("startSketch: %1, %2").arg(anInfo.size()).arg(anInfoStr).toStdString().c_str());
982 if(myCirclePointFilter.IsNull()) {
983 myCirclePointFilter = new PartSet_CirclePointFilter(myModule->workshop());
986 myModule->workshop()->viewer()->addSelectionFilter(myCirclePointFilter);
988 if (myPlaneFilter.IsNull())
989 myPlaneFilter = new ModuleBase_ShapeInPlaneFilter();
991 myModule->workshop()->viewer()->addSelectionFilter(myPlaneFilter);
992 bool aHasPlane = false;
993 std::shared_ptr<GeomAPI_Pln> aPln;
994 aPln = PartSet_Tools::sketchPlane(myCurrentSketch);
995 myPlaneFilter->setPlane(aPln);
997 Events_Loop::loop()->flush(Events_Loop::eventByName(EVENT_OBJECT_TO_REDISPLAY));
998 // all displayed objects should be activated in current selection modes according to switched
1001 aConnector->activateModuleSelectionModes();
1003 myExternalPointsMgr = new PartSet_ExternalPointsMgr(myModule->workshop(), myCurrentSketch);
1006 void PartSet_SketcherMgr::stopSketch(ModuleBase_Operation* theOperation)
1008 myIsMouseOverWindow = false;
1009 myIsConstraintsShown[PartSet_Tools::Geometrical] = true;
1010 myIsConstraintsShown[PartSet_Tools::Dimensional] = true;
1011 myIsConstraintsShown[PartSet_Tools::Expressions] = false;
1013 if (myExternalPointsMgr) {
1014 delete myExternalPointsMgr;
1015 myExternalPointsMgr = 0;
1018 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(myModule->workshop());
1020 DataPtr aData = myCurrentSketch->data();
1021 if (!aData->isValid()) {
1022 XGUI_Displayer* aDisplayer = aConnector->workshop()->displayer();
1023 // The sketch was aborted
1024 myCurrentSketch = CompositeFeaturePtr();
1025 // TODO: move this outside of if-else
1026 myModule->workshop()->viewer()->removeSelectionFilter(myCirclePointFilter);
1027 myModule->workshop()->viewer()->removeSelectionFilter(myPlaneFilter);
1029 // Erase all sketcher objects
1030 QObjectPtrList aObjects = aDisplayer->displayedObjects();
1031 foreach (ObjectPtr aObj, aObjects) {
1032 DataPtr aObjData = aObj->data();
1033 if (!aObjData->isValid())
1034 aObj->setDisplayed(false);
1038 // Hide all sketcher sub-Objects
1039 for (int i = 0; i < myCurrentSketch->numberOfSubs(); i++) {
1040 FeaturePtr aFeature = myCurrentSketch->subFeature(i);
1041 std::list<ResultPtr> aResults = aFeature->results();
1042 std::list<ResultPtr>::const_iterator aIt;
1043 for (aIt = aResults.begin(); aIt != aResults.end(); ++aIt) {
1044 (*aIt)->setDisplayed(false);
1046 aFeature->setDisplayed(false);
1048 // Display sketcher result
1049 std::list<ResultPtr> aResults = myCurrentSketch->results();
1050 std::list<ResultPtr>::const_iterator aIt;
1051 Events_Loop* aLoop = Events_Loop::loop();
1052 static Events_ID aDispEvent = aLoop->eventByName(EVENT_OBJECT_TO_REDISPLAY);
1054 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>
1056 for (aIt = aResults.begin(); aIt != aResults.end(); ++aIt) {
1057 if (!aFOperation->isDisplayedOnStart(*aIt)) {
1058 (*aIt)->setDisplayed(true);
1059 // this display event is needed because sketch already may have "displayed" state,
1060 // but not displayed while it is still active (issue 613, abort of existing sketch)
1061 ModelAPI_EventCreator::get()->sendUpdated(*aIt, aDispEvent);
1064 if (!aFOperation->isDisplayedOnStart(myCurrentSketch))
1065 myCurrentSketch->setDisplayed(true);
1067 myCurrentSketch = CompositeFeaturePtr();
1069 myModule->workshop()->viewer()->removeSelectionFilter(myCirclePointFilter);
1070 myModule->workshop()->viewer()->removeSelectionFilter(myPlaneFilter);
1072 Events_Loop::loop()->flush(aDispEvent);
1074 myModule->overconstraintListener()->setActive(false);
1075 // restore the module selection modes, which were changed on startSketch
1076 aConnector->activateModuleSelectionModes();
1079 void PartSet_SketcherMgr::startNestedSketch(ModuleBase_Operation* theOperation)
1081 if (canChangeCursor(theOperation) && myIsMouseOverWindow) {
1082 QCursor* aCurrentCursor = QApplication::overrideCursor();
1083 if (!aCurrentCursor || aCurrentCursor->shape() != Qt::CrossCursor) {
1084 QApplication::setOverrideCursor(QCursor(Qt::CrossCursor));
1086 qDebug("startNestedSketch() : Qt::CrossCursor");
1092 void PartSet_SketcherMgr::stopNestedSketch(ModuleBase_Operation* theOperation)
1094 myIsMouseOverViewProcessed = true;
1095 operationMgr()->onValidateOperation();
1096 // when sketch nested operation is stopped the cursor should be restored unconditionally
1097 //if (canChangeCursor(theOperation)) {
1098 QApplication::restoreOverrideCursor();
1100 qDebug("stopNestedSketch() : None");
1103 /// improvement to deselect automatically all eventual selected objects, when
1104 // returning to the neutral point of the Sketcher
1105 bool isClearSelectionPossible = true;
1106 if (myIsEditLaunching) {
1107 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>
1110 FeaturePtr aFeature = aFOperation->feature();
1111 if (aFeature.get() && PartSet_SketcherMgr::isEntity(aFeature->getKind())) {
1112 isClearSelectionPossible = false;
1116 if (isClearSelectionPossible)
1117 workshop()->selector()->clearSelection();
1120 void PartSet_SketcherMgr::commitNestedSketch(ModuleBase_Operation* theOperation)
1122 if (isNestedCreateOperation(theOperation, activeSketch())) {
1123 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>
1126 FeaturePtr aFeature = aFOperation->feature();
1127 // it is necessary to check the the feature data validity because
1128 // some kind of features are removed by an operation commit(the macro state of a feature)
1129 if (aFeature.get() && aFeature->data()->isValid()) {
1130 visualizeFeature(aFeature, aFOperation->isEditOperation(), true);
1136 void PartSet_SketcherMgr::activatePlaneFilter(const bool& toActivate)
1139 myModule->workshop()->viewer()->addSelectionFilter(myPlaneFilter);
1141 myModule->workshop()->viewer()->removeSelectionFilter(myPlaneFilter);
1144 bool PartSet_SketcherMgr::operationActivatedByPreselection()
1146 bool isOperationStopped = false;
1147 ModuleBase_Operation* anOperation = getCurrentOperation();
1148 if(anOperation && isNestedSketchOperation(anOperation)) {
1149 // Set final definitions if they are necessary
1150 //propertyPanelDefined(aOperation);
1151 /// Commit sketcher operations automatically
1152 /// distance operation are able to show popup editor to modify the distance value
1153 /// after entering the value, the operation should be committed/aborted(by Esc key)
1154 bool aCanCommitOperation = true;
1155 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>
1157 if (aFOperation && PartSet_SketcherMgr::isDistanceOperation(aFOperation)) {
1158 bool aValueAccepted = setDistanceValueByPreselection(anOperation, myModule->workshop(),
1159 aCanCommitOperation);
1160 if (!aValueAccepted)
1161 return isOperationStopped;
1164 if (aCanCommitOperation)
1165 isOperationStopped = anOperation->commit();
1167 anOperation->abort();
1168 isOperationStopped = true;
1171 return isOperationStopped;
1174 bool PartSet_SketcherMgr::canUndo() const
1176 return isNestedCreateOperation(getCurrentOperation(), activeSketch());
1179 bool PartSet_SketcherMgr::canRedo() const
1181 return isNestedCreateOperation(getCurrentOperation(), activeSketch());
1184 bool PartSet_SketcherMgr::canEraseObject(const ObjectPtr& theObject) const
1186 bool aCanErase = true;
1187 // when the sketch operation is active, results of sketch sub-feature can not be hidden
1188 if (myCurrentSketch.get()) {
1189 return !isObjectOfSketch(theObject);
1194 bool PartSet_SketcherMgr::canDisplayObject(const ObjectPtr& theObject) const
1196 bool aCanDisplay = true;
1198 bool aHasActiveSketch = activeSketch().get() != NULL;
1199 if (aHasActiveSketch) {
1200 // 1. the sketch feature should not be displayed during the sketch active operation
1201 // it is hidden by a sketch operation start and shown by a sketch stop, just the sketch
1202 // nested features can be visualized
1203 FeaturePtr aFeature = ModelAPI_Feature::feature(theObject);
1204 if (aFeature.get() != NULL && aFeature == activeSketch()) {
1205 aCanDisplay = false;
1207 std::shared_ptr<SketchPlugin_Feature> aSketchFeature =
1208 std::dynamic_pointer_cast<SketchPlugin_Feature>(aFeature);
1209 /// some sketch entities should be never shown, e.g. projection feature
1210 if (aSketchFeature.get())
1211 aCanDisplay = aSketchFeature->canBeDisplayed();
1213 else { // there are no an active sketch
1214 // 2. sketch sub-features should not be visualized if the sketch operation is not active
1215 FeaturePtr aFeature = ModelAPI_Feature::feature(theObject);
1216 if (aFeature.get() != NULL) {
1217 std::shared_ptr<SketchPlugin_Feature> aSketchFeature =
1218 std::dynamic_pointer_cast<SketchPlugin_Feature>(aFeature);
1219 if (aSketchFeature.get()) {
1220 aCanDisplay = false;
1225 // 3. the method should not filter the objects, which are not related to the current operation.
1226 // The object is filtered just if it is a current operation feature or this feature result
1228 bool isObjectFound = false;
1229 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>
1230 (getCurrentOperation());
1232 FeaturePtr aFeature = aFOperation->feature();
1233 if (aFeature.get()) {
1234 std::list<ResultPtr> aResults = aFeature->results();
1235 if (theObject == aFeature)
1236 isObjectFound = true;
1238 std::list<ResultPtr>::const_iterator anIt = aResults.begin(), aLast = aResults.end();
1239 for (; anIt != aLast && !isObjectFound; anIt++) {
1240 isObjectFound = *anIt == theObject;
1245 if (isObjectFound) {
1246 // 4. For created nested feature operation do not display the created feature if
1247 // the mouse curstor leaves the OCC window.
1248 // The correction cases, which ignores this condition:
1249 // a. the property panel values modification
1250 // b. the popup menu activated
1251 // c. widget editor control
1252 #ifndef DEBUG_DO_NOT_BY_ENTER
1253 if (isNestedCreateOperation(getCurrentOperation(), activeSketch())) {
1254 ModuleBase_ModelWidget* anActiveWidget = getActiveWidget();
1255 ModuleBase_WidgetEditor* anEditorWdg =
1256 anActiveWidget ? dynamic_cast<ModuleBase_WidgetEditor*>(anActiveWidget) : 0;
1257 // the active widget editor should not influence here. The presentation should be visible
1258 // always when this widget is active.
1259 if (!anEditorWdg && !myIsPopupMenuActive) {
1260 // during a nested create operation, the feature is redisplayed only
1261 // if the mouse over view
1262 // of there was a value modified in the property panel after the mouse left the view
1263 aCanDisplay = canDisplayCurrentCreatedFeature();
1270 // checks the sketcher constraints visibility according to active sketch check box states
1272 bool aProcessed = false;
1273 FeaturePtr aFeature = ModelAPI_Feature::feature(theObject);
1274 if (aFeature.get()) {
1275 bool aConstraintDisplayed = canDisplayConstraint(aFeature, PartSet_Tools::Any, aProcessed);
1277 aCanDisplay = aConstraintDisplayed;
1284 bool PartSet_SketcherMgr::canDisplayConstraint(const FeaturePtr& theFeature,
1285 const PartSet_Tools::ConstraintVisibleState& theState,
1286 bool& isProcessed) const
1288 bool aSwitchedOn = true;
1290 const QStringList& aConstrIds = constraintsIdList();
1292 std::string aKind = theFeature->getKind();
1293 if (aConstrIds.contains(QString(aKind.c_str()))) {
1294 bool isTypedConstraint = false;
1297 case PartSet_Tools::Dimensional: {
1298 bool isDistance = isDistanceKind(aKind);
1301 aSwitchedOn = myIsConstraintsShown[theState];
1305 case PartSet_Tools::Geometrical: {
1306 bool isGeometrical = !isDistanceKind(aKind);
1307 if (isGeometrical) {
1309 aSwitchedOn = myIsConstraintsShown[theState];
1313 case PartSet_Tools::Any: {
1315 bool isDistance = isDistanceKind(aKind);
1317 aSwitchedOn = myIsConstraintsShown[PartSet_Tools::Dimensional];
1319 aSwitchedOn = myIsConstraintsShown[PartSet_Tools::Geometrical];
1329 /*void PartSet_SketcherMgr::processHiddenObject(const std::list<ObjectPtr>& theObjects)
1331 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>
1332 (getCurrentOperation());
1333 if (aFOperation && myCurrentSketch.get()) {
1334 // find results of the current operation
1335 // these results should not be proposed to be deleted
1336 FeaturePtr anOperationFeature = aFOperation->feature();
1337 std::list<ResultPtr> anOperationResultList = anOperationFeature->results();
1338 std::set<ResultPtr> anOperationResults;
1339 std::list<ResultPtr>::const_iterator aRIt = anOperationResultList.begin(),
1340 aRLast = anOperationResultList.end();
1341 for (; aRIt != aRLast; aRIt++)
1342 anOperationResults.insert(*aRIt);
1344 std::set<FeaturePtr> anObjectsToBeDeleted;
1345 QStringList anObjectsToBeDeletedNames;
1346 std::list<ObjectPtr>::const_iterator anIt = theObjects.begin(), aLast = theObjects.end();
1347 for (; anIt != aLast; anIt++) {
1348 ObjectPtr anObject = *anIt;
1349 bool aCanErase = true;
1350 // when the sketch operation is active, results of sketch sub-feature can not be hidden
1351 ResultPtr aResult = std::dynamic_pointer_cast<ModelAPI_Result>(anObject);
1352 // the result is found between current feature results
1353 if (anOperationResults.find(aResult) != anOperationResults.end())
1356 if (aResult.get()) {
1357 // Display sketcher objects
1358 for (int i = 0; i < myCurrentSketch->numberOfSubs() && aCanErase; i++) {
1359 FeaturePtr aFeature = myCurrentSketch->subFeature(i);
1360 std::list<ResultPtr> aResults = aFeature->results();
1361 std::list<ResultPtr>::const_iterator anIt;
1362 for (anIt = aResults.begin(); anIt != aResults.end() && aCanErase; ++anIt) {
1363 aCanErase = *anIt != aResult;
1368 FeaturePtr aFeature = ModelAPI_Feature::feature(anObject);
1369 if (aFeature.get() && anObjectsToBeDeleted.find(aFeature) == anObjectsToBeDeleted.end()) {
1370 anObjectsToBeDeleted.insert(aFeature);
1371 anObjectsToBeDeletedNames.append(aFeature->name().c_str());
1375 if (!anObjectsToBeDeleted.empty()) {
1376 QString aFeatureNames = anObjectsToBeDeletedNames.join(", ");
1377 QString aMessage = tr("The following features have incorrect presentation and \
1378 will be hidden: %1. Would you like to delete them?")
1379 .arg(aFeatureNames);
1380 int anAnswer = QMessageBox::question(qApp->activeWindow(), tr("Features hide"),
1381 aMessage, QMessageBox::Ok | QMessageBox::Cancel,
1382 QMessageBox::Cancel);
1383 if (anAnswer == QMessageBox::Ok) {
1384 QObjectPtrList anObjects;
1385 std::set<FeaturePtr>::const_iterator anIt = anObjectsToBeDeleted.begin(),
1386 aLast = anObjectsToBeDeleted.end();
1387 for (; anIt != aLast; anIt++)
1388 anObjects.append(*anIt);
1389 SessionPtr aMgr = ModelAPI_Session::get();
1390 DocumentPtr aDoc = aMgr->activeDocument();
1391 bool aIsOp = aMgr->isOperation();
1393 aMgr->startOperation();
1394 workshop()->deleteFeatures(anObjects);
1395 //static Events_ID aDeletedEvent = Events_Loop::eventByName(EVENT_OBJECT_DELETED);
1396 //static Events_ID aRedispEvent = Events_Loop::eventByName(EVENT_OBJECT_TO_REDISPLAY);
1397 //Events_Loop::loop()->flush(aDeletedEvent);
1398 //Events_Loop::loop()->flush(aRedispEvent);
1401 aMgr->finishOperation();
1407 bool PartSet_SketcherMgr::canDisplayCurrentCreatedFeature() const
1409 bool aCanDisplay = myIsMouseOverWindow;
1411 ModuleBase_ModelWidget* anActiveWidget = getActiveWidget();
1413 aCanDisplay = anActiveWidget->getValueState() == ModuleBase_ModelWidget::Stored;
1418 bool PartSet_SketcherMgr::canChangeCursor(ModuleBase_Operation* theOperation) const
1420 return isNestedCreateOperation(theOperation, activeSketch()) ||
1421 myModule->sketchReentranceMgr()->isInternalEditActive();
1424 const QMap<PartSet_Tools::ConstraintVisibleState, bool>& PartSet_SketcherMgr::showConstraintStates()
1426 return myIsConstraintsShown;
1429 bool PartSet_SketcherMgr::isObjectOfSketch(const ObjectPtr& theObject) const
1431 bool isFoundObject = false;
1433 FeaturePtr anObjectFeature = ModelAPI_Feature::feature(theObject);
1434 if (anObjectFeature.get()) {
1435 int aSize = myCurrentSketch->numberOfSubs();
1436 for (int i = 0; i < myCurrentSketch->numberOfSubs() && !isFoundObject; i++) {
1437 FeaturePtr aCurrentFeature = myCurrentSketch->subFeature(i);
1438 isFoundObject = myCurrentSketch->subFeature(i) == anObjectFeature;
1441 return isFoundObject;
1444 void PartSet_SketcherMgr::onPlaneSelected(const std::shared_ptr<GeomAPI_Pln>& thePln)
1446 if (myPlaneFilter.IsNull())
1447 myPlaneFilter = new ModuleBase_ShapeInPlaneFilter();
1449 myPlaneFilter->setPlane(thePln);
1452 bool PartSet_SketcherMgr::setDistanceValueByPreselection(ModuleBase_Operation* theOperation,
1453 ModuleBase_IWorkshop* theWorkshop,
1454 bool& theCanCommitOperation)
1456 bool isValueAccepted = false;
1457 theCanCommitOperation = false;
1459 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>
1461 FeaturePtr aFeature = aFOperation->feature();
1462 // editor is shown only if all attribute references are filled by preseletion
1463 bool anAllRefAttrInitialized = true;
1465 std::list<AttributePtr> aRefAttrs = aFeature->data()->attributes(
1466 ModelAPI_AttributeRefAttr::typeId());
1467 std::list<AttributePtr>::const_iterator anIt = aRefAttrs.begin(), aLast = aRefAttrs.end();
1468 for (; anIt != aLast && anAllRefAttrInitialized; anIt++) {
1469 anAllRefAttrInitialized = (*anIt)->isInitialized();
1471 if (anAllRefAttrInitialized) {
1472 // Activate dimension value editing on double click
1473 ModuleBase_IPropertyPanel* aPanel = aFOperation->propertyPanel();
1474 QList<ModuleBase_ModelWidget*> aWidgets = aPanel->modelWidgets();
1475 // Find corresponded widget to activate value editing
1476 foreach (ModuleBase_ModelWidget* aWgt, aWidgets) {
1477 if (aWgt->attributeID() == "ConstraintValue") {
1478 // the featue should be displayed in order to find the AIS text position,
1479 // the place where the editor will be shown
1480 aFeature->setDisplayed(true);
1481 /// the execute is necessary to perform in the feature compute for flyout position
1482 aFeature->execute();
1484 Events_Loop::loop()->flush(Events_Loop::eventByName(EVENT_OBJECT_CREATED));
1485 Events_Loop::loop()->flush(Events_Loop::eventByName(EVENT_OBJECT_TO_REDISPLAY));
1487 PartSet_WidgetEditor* anEditor = dynamic_cast<PartSet_WidgetEditor*>(aWgt);
1489 int aX = 0, anY = 0;
1491 XGUI_Workshop* aWorkshop = XGUI_Tools::workshop(theWorkshop);
1492 XGUI_Displayer* aDisplayer = aWorkshop->displayer();
1493 AISObjectPtr anAIS = aDisplayer->getAISObject(aFeature);
1494 Handle(AIS_InteractiveObject) anAISIO;
1495 if (anAIS.get() != NULL) {
1496 anAISIO = anAIS->impl<Handle(AIS_InteractiveObject)>();
1498 if (anAIS.get() != NULL) {
1499 Handle(AIS_InteractiveObject) anAISIO = anAIS->impl<Handle(AIS_InteractiveObject)>();
1501 if (!anAISIO.IsNull()) {
1502 Handle(AIS_Dimension) aDim = Handle(AIS_Dimension)::DownCast(anAISIO);
1503 if (!aDim.IsNull()) {
1504 gp_Pnt aPosition = aDim->GetTextPosition();
1506 ModuleBase_IViewer* aViewer = aWorkshop->viewer();
1507 Handle(V3d_View) aView = aViewer->activeView();
1509 aView->Convert(aPosition.X(), aPosition.Y(), aPosition.Z(), aCX, aCY);
1511 QWidget* aViewPort = aViewer->activeViewPort();
1512 QPoint aGlPoint = aViewPort->mapToGlobal(QPoint(aCX, aCY));
1517 anEditor->setCursorPosition(aX, anY);
1518 isValueAccepted = anEditor->showPopupEditor(false);
1519 theCanCommitOperation = true;
1525 return isValueAccepted;
1528 void PartSet_SketcherMgr::getSelectionOwners(const FeaturePtr& theFeature,
1529 const FeaturePtr& theSketch,
1530 ModuleBase_IWorkshop* theWorkshop,
1531 const FeatureToSelectionMap& theSelection,
1532 SelectMgr_IndexedMapOfOwner& theOwnersToSelect)
1534 if (theFeature.get() == NULL)
1537 FeatureToSelectionMap::const_iterator anIt = theSelection.find(theFeature);
1538 SelectionInfo anInfo = anIt.value();
1539 std::set<AttributePtr> aSelectedAttributes = anInfo.myAttributes;
1540 std::set<ResultPtr> aSelectedResults = anInfo.myResults;
1542 ModuleBase_IViewer* aViewer = theWorkshop->viewer();
1544 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(theWorkshop);
1545 XGUI_Displayer* aDisplayer = aConnector->workshop()->displayer();
1547 // 1. found the feature's owners. Check the AIS objects of the constructions
1548 AISObjectPtr aAISObj = aDisplayer->getAISObject(theFeature);
1549 if (aAISObj.get() != NULL && aSelectedAttributes.empty() && aSelectedResults.empty()) {
1550 Handle(AIS_InteractiveObject) anAISIO = aAISObj->impl<Handle(AIS_InteractiveObject)>();
1552 SelectMgr_IndexedMapOfOwner aSelectedOwners;
1553 aConnector->workshop()->selector()->selection()->entityOwners(anAISIO, aSelectedOwners);
1554 for (Standard_Integer i = 1, n = aSelectedOwners.Extent(); i <= n; i++) {
1555 Handle(SelectMgr_EntityOwner) anOwner = aSelectedOwners(i);
1556 if (!anOwner.IsNull())
1557 theOwnersToSelect.Add(anOwner);
1561 // 2. found the feature results's owners
1562 std::list<ResultPtr> aResults = theFeature->results();
1563 std::list<ResultPtr>::const_iterator aIt;
1565 bool isSameShape = false;
1566 if (aResults.size() > 0) {
1567 ResultPtr aFirstResult = theFeature->firstResult();
1568 if (aFirstResult.get() && aFirstResult->shape().get()) {
1569 TopoDS_Shape aFirstShape = aFirstResult->shape()->impl<TopoDS_Shape>();
1570 isSameShape = aFirstShape.IsEqual(anInfo.myFirstResultShape);
1573 for (aIt = aResults.begin(); aIt != aResults.end(); ++aIt) {
1574 ResultPtr aResult = *aIt;
1575 AISObjectPtr aAISObj = aDisplayer->getAISObject(aResult);
1576 if (aAISObj.get() == NULL)
1578 Handle(AIS_InteractiveObject) anAISIO = aAISObj->impl<Handle(AIS_InteractiveObject)>();
1580 SelectMgr_IndexedMapOfOwner aSelectedOwners;
1581 aConnector->workshop()->selector()->selection()->entityOwners(anAISIO, aSelectedOwners);
1582 bool aFoundLocalShape = false;
1583 for ( Standard_Integer i = 1, n = aSelectedOwners.Extent(); i <= n; i++ ) {
1584 Handle(StdSelect_BRepOwner) anOwner =
1585 Handle(StdSelect_BRepOwner)::DownCast(aSelectedOwners(i));
1586 if ( anOwner.IsNull() || !anOwner->HasShape() || theOwnersToSelect.FindIndex(anOwner))
1588 const TopoDS_Shape& aShape = anOwner->Shape();
1589 TopAbs_ShapeEnum aShapeType = aShape.ShapeType();
1590 if (aShapeType == TopAbs_VERTEX) {
1591 AttributePtr aPntAttr =
1592 PartSet_Tools::findAttributeBy2dPoint(theFeature, aShape, theSketch);
1593 if (aPntAttr.get() != NULL &&
1594 aSelectedAttributes.find(aPntAttr) != aSelectedAttributes.end())
1595 theOwnersToSelect.Add(anOwner);
1596 else if (isSameShape && anInfo.myLocalSelectedShapes.Contains(aShape)) {
1597 theOwnersToSelect.Add(anOwner);
1600 else if (aShapeType == TopAbs_EDGE) {
1601 if (isSameShape && anInfo.myLocalSelectedShapes.Contains(aShape)) {
1602 // try to restore local selection on Shape result
1603 // we can do this only if the shape was not changed
1604 theOwnersToSelect.Add(anOwner);
1605 aFoundLocalShape = true;
1610 if (!aFoundLocalShape) {
1611 // result owners are put in the list of selection only if local selected shapes were not
1613 if (aSelectedResults.find(aResult) != aSelectedResults.end()) {
1614 for ( Standard_Integer i = 1, n = aSelectedOwners.Extent(); i <= n; i++ ) {
1615 Handle(StdSelect_BRepOwner) anOwner =
1616 Handle(StdSelect_BRepOwner)::DownCast(aSelectedOwners(i));
1617 if ( anOwner.IsNull() || !anOwner->HasShape() || theOwnersToSelect.FindIndex(anOwner))
1619 // select whole result
1620 theOwnersToSelect.Add(anOwner);
1627 void PartSet_SketcherMgr::connectToPropertyPanel(ModuleBase_ModelWidget* theWidget,
1628 const bool isToConnect)
1630 //Temporary commented as we do not modify values in property panel
1632 //connect(theWidget, SIGNAL(beforeValuesChanged()),
1633 // this, SLOT(onBeforeValuesChangedInPropertyPanel()));
1634 //connect(theWidget, SIGNAL(afterValuesChanged()),
1635 // this, SLOT(onAfterValuesChangedInPropertyPanel()));
1636 connect(theWidget, SIGNAL(afterValuesChanged()),
1637 myModule->sketchReentranceMgr(), SLOT(onAfterValuesChangedInPropertyPanel()));
1640 //disconnect(theWidget, SIGNAL(beforeValuesChanged()),
1641 // this, SLOT(onBeforeValuesChangedInPropertyPanel()));
1642 //disconnect(theWidget, SIGNAL(afterValuesChanged()),
1643 // this, SLOT(onAfterValuesChangedInPropertyPanel()));
1644 disconnect(theWidget, SIGNAL(afterValuesChanged()),
1645 myModule->sketchReentranceMgr(), SLOT(onAfterValuesChangedInPropertyPanel()));
1649 void PartSet_SketcherMgr::widgetStateChanged(int thePreviousState)
1651 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>
1652 (getCurrentOperation());
1654 if (PartSet_SketcherMgr::isSketchOperation(aFOperation) ||
1655 isNestedSketchOperation(aFOperation) &&
1656 thePreviousState == ModuleBase_ModelWidget::ModifiedInPP) {
1657 FeaturePtr aFeature = aFOperation->feature();
1658 visualizeFeature(aFeature, aFOperation->isEditOperation(), canDisplayObject(aFeature));
1663 void PartSet_SketcherMgr::customizePresentation(const ObjectPtr& theObject)
1665 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>
1666 (getCurrentOperation());
1667 if (aFOperation && (PartSet_SketcherMgr::isSketchOperation(aFOperation) ||
1668 isNestedSketchOperation(aFOperation)))
1669 SketcherPrs_Tools::sendExpressionShownEvent(myIsConstraintsShown[PartSet_Tools::Expressions]);
1671 // update entities selection priorities
1672 FeaturePtr aFeature = ModelAPI_Feature::feature(theObject);
1673 if (aFeature.get() && PartSet_SketcherMgr::isEntity(aFeature->getKind())) {
1674 // update priority for feature
1675 updateSelectionPriority(aFeature, aFeature);
1676 // update priority for results of the feature
1677 std::list<ResultPtr> aResults = aFeature->results();
1678 std::list<ResultPtr>::const_iterator anIt = aResults.begin(), aLastIt = aResults.end();
1679 for (; anIt != aLastIt; anIt++)
1680 updateSelectionPriority(*anIt, aFeature);
1684 ModuleBase_Operation* PartSet_SketcherMgr::getCurrentOperation() const
1686 return myModule->workshop()->currentOperation();
1689 //**************************************************************
1690 ModuleBase_ModelWidget* PartSet_SketcherMgr::getActiveWidget() const
1692 ModuleBase_ModelWidget* aWidget = 0;
1693 ModuleBase_Operation* anOperation = getCurrentOperation();
1695 ModuleBase_IPropertyPanel* aPanel = anOperation->propertyPanel();
1697 aWidget = aPanel->activeWidget();
1702 void PartSet_SketcherMgr::visualizeFeature(const FeaturePtr& theFeature,
1703 const bool isEditOperation,
1704 const bool isToDisplay,
1705 const bool isFlushRedisplay)
1707 #ifdef DEBUG_DO_NOT_BY_ENTER
1711 if (isEditOperation || !theFeature.get())
1714 ModuleBase_IWorkshop* aWorkshop = myModule->workshop();
1715 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(aWorkshop);
1717 // 1. change visibility of the object itself, here the presentable object is processed,
1718 // e.g. constraints features
1719 //FeaturePtr aFeature = aFOperation->feature();
1720 std::list<ResultPtr> aResults = theFeature->results();
1722 theFeature->setDisplayed(true);
1724 theFeature->setDisplayed(false);
1726 // change visibility of the object results, e.g. non-constraint features
1727 std::list<ResultPtr>::const_iterator aIt;
1728 for (aIt = aResults.begin(); aIt != aResults.end(); ++aIt) {
1730 (*aIt)->setDisplayed(true);
1733 (*aIt)->setDisplayed(false);
1736 if (isFlushRedisplay)
1737 Events_Loop::loop()->flush(Events_Loop::eventByName(EVENT_OBJECT_TO_REDISPLAY));
1740 void PartSet_SketcherMgr::storeSelection(const SelectionType theType,
1741 PartSet_SketcherMgr::FeatureToSelectionMap& theCurrentSelection)
1743 if (!myCurrentSketch.get())
1746 ModuleBase_IWorkshop* aWorkshop = myModule->workshop();
1747 ModuleBase_ISelection* aSelect = aWorkshop->selection();
1748 QList<ModuleBase_ViewerPrsPtr> aStoredPrs;
1750 if (theType == ST_HighlightType || theType == ST_SelectAndHighlightType)
1751 aStoredPrs = aSelect->getHighlighted();
1753 QList<FeaturePtr> aFeatureList;
1754 if (theType == ST_SelectAndHighlightType || theType == ST_SelectType) {
1755 QList<ModuleBase_ViewerPrsPtr> aSelected = aSelect->getSelected(
1756 ModuleBase_ISelection::AllControls);
1757 aStoredPrs.append(aSelected);
1760 // 1. it is necessary to save current selection in order to restore it after the features moving
1761 theCurrentSelection.clear();
1763 QList<ModuleBase_ViewerPrsPtr>::const_iterator anIt = aStoredPrs.begin(),
1764 aLast = aStoredPrs.end();
1766 CompositeFeaturePtr aSketch = activeSketch();
1767 for (; anIt != aLast; anIt++) {
1768 ModuleBase_ViewerPrsPtr aPrs = *anIt;
1769 ObjectPtr anObject = aPrs->object();
1770 if (!anObject.get())
1773 ResultPtr aResult = std::dynamic_pointer_cast<ModelAPI_Result>(anObject);
1774 FeaturePtr aFeature;
1776 aFeature = ModelAPI_Feature::feature(aResult);
1778 aFeature = std::dynamic_pointer_cast<ModelAPI_Feature>(anObject);
1780 if (!aFeature.get())
1783 std::set<AttributePtr> aSelectedAttributes;
1784 std::set<ResultPtr> aSelectedResults;
1785 SelectionInfo anInfo;
1786 if (theCurrentSelection.find(aFeature) != theCurrentSelection.end())
1787 anInfo = theCurrentSelection.find(aFeature).value();
1789 TopoDS_Shape aFirstShape;
1790 ResultPtr aFirstResult = aFeature->firstResult();
1791 if (aFirstResult.get() && aFirstResult->shape().get())
1792 aFirstShape = aFirstResult->shape()->impl<TopoDS_Shape>();
1793 anInfo.myFirstResultShape = aFirstShape;
1794 Handle(SelectMgr_EntityOwner) anOwner = aPrs->owner();
1795 if (aResult.get()) {
1796 getAttributesOrResults(anOwner, aFeature, aSketch, aResult,
1797 anInfo.myAttributes, anInfo.myResults, anInfo.myLocalSelectedShapes);
1800 std::list<ResultPtr> aResults = aFeature->results();
1801 std::list<ResultPtr>::const_iterator aIt;
1802 for (aIt = aResults.begin(); aIt != aResults.end(); ++aIt) {
1803 ResultPtr aResult = *aIt;
1804 getAttributesOrResults(anOwner, aFeature, aSketch, aResult,
1805 anInfo.myAttributes, anInfo.myResults, anInfo.myLocalSelectedShapes);
1808 theCurrentSelection[aFeature] = anInfo;
1810 //qDebug(QString(" storeSelection: %1").arg(theCurrentSelection.size()).toStdString().c_str());
1813 void PartSet_SketcherMgr::restoreSelection(
1814 PartSet_SketcherMgr::FeatureToSelectionMap& theCurrentSelection)
1816 if (!myCurrentSketch.get())
1819 //qDebug(QString("restoreSelection: %1").arg(theCurrentSelection.size()).toStdString().c_str());
1820 ModuleBase_IWorkshop* aWorkshop = myModule->workshop();
1821 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(aWorkshop);
1822 FeatureToSelectionMap::const_iterator aSIt = theCurrentSelection.begin(),
1823 aSLast = theCurrentSelection.end();
1824 SelectMgr_IndexedMapOfOwner anOwnersToSelect;
1825 anOwnersToSelect.Clear();
1826 for (; aSIt != aSLast; aSIt++) {
1827 getSelectionOwners(aSIt.key(), myCurrentSketch, aWorkshop, theCurrentSelection,
1830 aConnector->workshop()->selector()->setSelectedOwners(anOwnersToSelect, false);
1833 void PartSet_SketcherMgr::onShowConstraintsToggle(int theType, bool theState)
1835 PartSet_Tools::ConstraintVisibleState aType = (PartSet_Tools::ConstraintVisibleState)theType;
1837 updateBySketchParameters(aType, theState);
1840 void PartSet_SketcherMgr::updateBySketchParameters(
1841 const PartSet_Tools::ConstraintVisibleState& theType,
1844 if (myCurrentSketch.get() == NULL)
1847 bool aPrevState = myIsConstraintsShown[theType];
1848 myIsConstraintsShown[theType] = theState;
1851 case PartSet_Tools::Geometrical:
1852 case PartSet_Tools::Dimensional: {
1853 if (aPrevState != theState) {
1854 ModuleBase_IWorkshop* aWorkshop = myModule->workshop();
1855 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(aWorkshop);
1856 for (int i = 0; i < myCurrentSketch->numberOfSubs(); i++) {
1857 FeaturePtr aSubFeature = myCurrentSketch->subFeature(i);
1858 bool aProcessed = false;
1859 bool aConstraintDisplayed = canDisplayConstraint(aSubFeature, theType, aProcessed);
1861 aSubFeature->setDisplayed(aConstraintDisplayed);
1863 Events_Loop::loop()->flush(Events_Loop::eventByName(EVENT_OBJECT_TO_REDISPLAY));
1867 case PartSet_Tools::Expressions: {
1868 if (aPrevState != theState) {
1869 /// call all sketch features redisplay, the expression state will be corrected in customize
1870 /// of distance presentation
1871 Events_ID anEventId = Events_Loop::loop()->eventByName(EVENT_OBJECT_TO_REDISPLAY);
1872 PartSet_Tools::sendSubFeaturesEvent(myCurrentSketch, anEventId);
1879 void PartSet_SketcherMgr::updateSelectionPriority(ObjectPtr theObject,
1880 FeaturePtr theFeature)
1882 if (!theObject.get() || !theFeature.get())
1885 AISObjectPtr anAIS = workshop()->displayer()->getAISObject(theObject);
1886 Handle(AIS_InteractiveObject) anAISIO;
1887 if (anAIS.get() != NULL) {
1888 anAISIO = anAIS->impl<Handle(AIS_InteractiveObject)>();
1891 if (!anAISIO.IsNull()) { // the presentation for the object is visualized
1892 int anAdditionalPriority = 0;
1894 std::shared_ptr<SketchPlugin_Feature> aSPFeature =
1895 std::dynamic_pointer_cast<SketchPlugin_Feature>(theFeature);
1896 if (aSPFeature.get() != NULL) {
1898 // 2. Simple segments
1899 // 3. External objects (violet color)
1900 // 4. Auxiliary segments (dotted)
1901 // StdSelect_BRepSelectionTool::Load uses priority calculating:
1902 // Standard_Integer aPriority =
1903 // (thePriority == -1) ? GetStandardPriority (theShape, theType) : thePriority;
1904 // Priority of Vertex is 8, edge(segment) is 7.
1905 // It might be not corrected as provides the condition above.
1906 bool isExternal = aSPFeature->isExternal();
1907 bool isAuxiliary = PartSet_Tools::isAuxiliarySketchEntity(aSPFeature);
1909 if (!isExternal && !isAuxiliary)
1910 anAdditionalPriority = 30;
1913 anAdditionalPriority = 20;
1914 // auxiliary feature
1916 anAdditionalPriority = 10; /// auxiliary objects should have less priority that
1917 // edges/vertices of local selection on not-sketch objects
1919 Handle(ModuleBase_ResultPrs) aResult = Handle(ModuleBase_ResultPrs)::DownCast(anAISIO);
1920 if (!aResult.IsNull()) {
1921 aResult->setAdditionalSelectionPriority(anAdditionalPriority);
1927 XGUI_Workshop* PartSet_SketcherMgr::workshop() const
1929 ModuleBase_IWorkshop* anIWorkshop = myModule->workshop();
1930 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(anIWorkshop);
1931 return aConnector->workshop();
1934 XGUI_OperationMgr* PartSet_SketcherMgr::operationMgr() const
1936 return workshop()->operationMgr();