1 // Copyright (C) 2014-20xx CEA/DEN, EDF R&D
3 // File: PartSet_SketcherMgr.cpp
4 // Created: 19 Dec 2014
5 // Author: Vitaly SMETANNIKOV
7 #include "PartSet_SketcherMgr.h"
8 #include "PartSet_SketcherReetntrantMgr.h"
9 #include "PartSet_Module.h"
10 #include "PartSet_MouseProcessor.h"
11 #include "PartSet_Tools.h"
12 #include "PartSet_WidgetSketchLabel.h"
13 #include "PartSet_WidgetEditor.h"
14 #include "PartSet_ResultSketchPrs.h"
16 #include <XGUI_ModuleConnector.h>
17 #include <XGUI_Displayer.h>
18 #include <XGUI_Workshop.h>
19 #include <XGUI_ContextMenuMgr.h>
20 #include <XGUI_Selection.h>
21 #include <XGUI_SelectionMgr.h>
22 #include <XGUI_ModuleConnector.h>
23 #include <XGUI_PropertyPanel.h>
24 #include <XGUI_ViewerProxy.h>
25 #include <XGUI_OperationMgr.h>
26 #include <XGUI_ErrorMgr.h>
27 #include <XGUI_Tools.h>
29 #include <ModuleBase_IPropertyPanel.h>
30 #include <ModuleBase_ISelection.h>
31 #include <ModuleBase_IViewer.h>
32 #include <ModuleBase_IWorkshop.h>
33 #include <ModuleBase_IViewWindow.h>
34 #include <ModuleBase_ModelWidget.h>
35 #include <ModuleBase_Operation.h>
36 #include <ModuleBase_OperationFeature.h>
37 #include <ModuleBase_Operation.h>
38 #include <ModuleBase_WidgetEditor.h>
39 #include <ModuleBase_ViewerPrs.h>
40 #include <ModuleBase_Tools.h>
41 #include <ModuleBase_ResultPrs.h>
43 #include <GeomDataAPI_Point2D.h>
45 #include <Events_Loop.h>
47 #include <SketchPlugin_Line.h>
48 #include <SketchPlugin_Sketch.h>
49 #include <SketchPlugin_Point.h>
50 #include <SketchPlugin_Arc.h>
51 #include <SketchPlugin_Circle.h>
52 #include <SketchPlugin_ConstraintLength.h>
53 #include <SketchPlugin_ConstraintDistance.h>
54 #include <SketchPlugin_ConstraintParallel.h>
55 #include <SketchPlugin_ConstraintPerpendicular.h>
56 #include <SketchPlugin_ConstraintRadius.h>
57 #include <SketchPlugin_ConstraintRigid.h>
58 #include <SketchPlugin_ConstraintHorizontal.h>
59 #include <SketchPlugin_ConstraintVertical.h>
60 #include <SketchPlugin_ConstraintEqual.h>
61 #include <SketchPlugin_ConstraintTangent.h>
62 #include <SketchPlugin_ConstraintCoincidence.h>
63 #include <SketchPlugin_ConstraintFillet.h>
64 #include <SketchPlugin_ConstraintMirror.h>
65 #include <SketchPlugin_ConstraintAngle.h>
66 #include <SketchPlugin_ConstraintCollinear.h>
67 #include <SketchPlugin_ConstraintMiddle.h>
68 #include <SketchPlugin_MultiRotation.h>
69 #include <SketchPlugin_MultiTranslation.h>
70 #include <SketchPlugin_IntersectionPoint.h>
72 #include <SketcherPrs_Tools.h>
74 #include <SelectMgr_IndexedMapOfOwner.hxx>
75 #include <StdSelect_BRepOwner.hxx>
77 //#include <AIS_DimensionSelectionMode.hxx>
78 #include <AIS_Shape.hxx>
79 #include <AIS_Dimension.hxx>
81 #include <ModelAPI_Events.h>
82 #include <ModelAPI_Session.h>
83 #include <ModelAPI_AttributeString.h>
85 #include <ModelAPI_Validator.h>
86 #include <ModelAPI_Tools.h>
88 #include <QMouseEvent>
89 #include <QApplication>
91 #include <QMessageBox>
92 #include <QMainWindow>
94 //#define DEBUG_DO_NOT_BY_ENTER
95 //#define DEBUG_SKETCHER_ENTITIES
96 //#define DEBUG_SKETCH_ENTITIES_ON_MOVE
98 //#define DEBUG_CURSOR
100 /// Fills attribute and result lists by the selected owner. In case if the attribute is found,
101 /// by the owner shape, it is put to the list. Otherwise if type of owner shape is edge,
102 /// put the function result as is to the list of results.
103 /// \param theOwner a viewer selected owner
104 /// \param theFeature a feature, where the attribute is searched
105 /// \param theSketch a current sketch
106 /// \param theSelectedAttribute an output list of attributes
107 /// \param theSelectedResults an output list of edge results
108 void getAttributesOrResults(const Handle(SelectMgr_EntityOwner)& theOwner,
109 const FeaturePtr& theFeature, const FeaturePtr& theSketch,
110 const ResultPtr& theResult,
111 std::set<AttributePtr>& aSelectedAttributes,
112 std::set<ResultPtr>& aSelectedResults)
114 Handle(StdSelect_BRepOwner) aBRepOwner = Handle(StdSelect_BRepOwner)::DownCast(theOwner);
115 if (aBRepOwner.IsNull())
117 Handle(AIS_InteractiveObject) anIO = Handle(AIS_InteractiveObject)::DownCast(
118 aBRepOwner->Selectable());
119 if (aBRepOwner->HasShape()) {
120 const TopoDS_Shape& aShape = aBRepOwner->Shape();
121 TopAbs_ShapeEnum aShapeType = aShape.ShapeType();
122 if (aShapeType == TopAbs_VERTEX) {
123 AttributePtr aPntAttr = PartSet_Tools::findAttributeBy2dPoint(theFeature,
125 if (aPntAttr.get() != NULL)
126 aSelectedAttributes.insert(aPntAttr);
128 else if (aShapeType == TopAbs_EDGE &&
129 aSelectedResults.find(theResult) == aSelectedResults.end()) {
130 aSelectedResults.insert(theResult);
135 PartSet_SketcherMgr::PartSet_SketcherMgr(PartSet_Module* theModule)
136 : QObject(theModule), myModule(theModule), myIsDragging(false), myDragDone(false),
137 myIsMouseOverWindow(false),
138 myIsMouseOverViewProcessed(true), myPreviousUpdateViewerEnabled(true),
139 myIsPopupMenuActive(false)
141 ModuleBase_IWorkshop* anIWorkshop = myModule->workshop();
142 ModuleBase_IViewer* aViewer = anIWorkshop->viewer();
144 myPreviousDrawModeEnabled = true;//aViewer->isSelectionEnabled();
146 connect(aViewer, SIGNAL(mousePress(ModuleBase_IViewWindow*, QMouseEvent*)),
147 this, SLOT(onMousePressed(ModuleBase_IViewWindow*, QMouseEvent*)));
149 connect(aViewer, SIGNAL(mouseRelease(ModuleBase_IViewWindow*, QMouseEvent*)),
150 this, SLOT(onMouseReleased(ModuleBase_IViewWindow*, QMouseEvent*)));
152 connect(aViewer, SIGNAL(mouseMove(ModuleBase_IViewWindow*, QMouseEvent*)),
153 this, SLOT(onMouseMoved(ModuleBase_IViewWindow*, QMouseEvent*)));
155 connect(aViewer, SIGNAL(mouseDoubleClick(ModuleBase_IViewWindow*, QMouseEvent*)),
156 this, SLOT(onMouseDoubleClick(ModuleBase_IViewWindow*, QMouseEvent*)));
158 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(anIWorkshop);
159 XGUI_Workshop* aWorkshop = aConnector->workshop();
160 connect(aWorkshop, SIGNAL(applicationStarted()), this, SLOT(onApplicationStarted()));
162 myIsConstraintsShown[PartSet_Tools::Geometrical] = true;
163 myIsConstraintsShown[PartSet_Tools::Dimensional] = true;
164 myIsConstraintsShown[PartSet_Tools::Expressions] = false;
167 PartSet_SketcherMgr::~PartSet_SketcherMgr()
169 if (!myPlaneFilter.IsNull())
170 myPlaneFilter.Nullify();
173 void PartSet_SketcherMgr::onEnterViewPort()
175 // 1. if the mouse over window, update the next flag. Do not perform update visibility of
176 // created feature because it should be done in onMouseMove(). Some widgets watch
177 // the mouse move and use the cursor position to update own values. If the presentaion is
178 // redisplayed before this update, the feature presentation jumps from reset value to current.
179 myIsMouseOverWindow = true;
181 #ifdef DEBUG_DO_NOT_BY_ENTER
185 if (canChangeCursor(getCurrentOperation())) {
186 QCursor* aCurrentCursor = QApplication::overrideCursor();
187 if (!aCurrentCursor || aCurrentCursor->shape() != Qt::CrossCursor) {
188 QApplication::setOverrideCursor(QCursor(Qt::CrossCursor));
190 qDebug("onEnterViewPort() : Qt::CrossCursor");
195 if (!isNestedCreateOperation(getCurrentOperation(), activeSketch()))
198 operationMgr()->onValidateOperation();
200 // we need change displayed state of the current operation feature
201 // if the feature is presentable, e.g. distance construction. It has no results, so workshop does
202 // not accept a signal about the result created. Nothing is shown until mouse is moved out/in view
203 // port. If the isDisplayed flag is true, the presentable feature is displayed as soon as the
204 // presentation becomes valid and redisplay happens
205 //ModuleBase_Operation* aOperation = getCurrentOperation();
206 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>
207 (getCurrentOperation());
209 FeaturePtr aFeature = aFOperation->feature();
210 if (aFeature.get() && aFeature->data()->isValid()) {
211 visualizeFeature(aFeature, aFOperation->isEditOperation(), canDisplayObject(aFeature), false);
216 void PartSet_SketcherMgr::onLeaveViewPort()
218 myIsMouseOverViewProcessed = false;
219 myIsMouseOverWindow = false;
221 #ifdef DEBUG_DO_NOT_BY_ENTER
225 if (canChangeCursor(getCurrentOperation())) {
226 QApplication::restoreOverrideCursor();
228 qDebug("onLeaveViewPort() : None");
232 if (!isNestedCreateOperation(getCurrentOperation(), activeSketch()))
235 // the method should be performed if the popup menu is called,
236 // the reset of the current widget should not happen
237 if (myIsPopupMenuActive)
240 // it is important to validate operation here only if sketch entity create operation is active
241 // because at this operation we reacts to the mouse leave/enter view port
242 operationMgr()->onValidateOperation();
244 // 2. if the mouse IS NOT over window, reset the active widget value and hide the presentation
245 ModuleBase_IWorkshop* aWorkshop = myModule->workshop();
246 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(aWorkshop);
247 XGUI_Displayer* aDisplayer = aConnector->workshop()->displayer();
248 // disable the viewer update in order to avoid visualization of redisplayed feature in viewer
249 // obtained after reset value
250 bool isEnableUpdateViewer = aDisplayer->enableUpdateViewer(false);
251 ModuleBase_ModelWidget* anActiveWidget = getActiveWidget();
253 anActiveWidget->reset();
255 // hides the presentation of the current operation feature
256 // the feature is to be erased here, but it is correct to call canDisplayObject because
257 // there can be additional check (e.g. editor widget in distance constraint)
258 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>
259 (getCurrentOperation());
261 FeaturePtr aFeature = aFOperation->feature();
262 visualizeFeature(aFeature, aFOperation->isEditOperation(), canDisplayObject(aFeature));
264 // we should update viewer after the presentation are hidden in the viewer
265 // otherwise the reset presentation(line) appears in the viewer(by quick move from viewer to PP)
266 aDisplayer->enableUpdateViewer(isEnableUpdateViewer);
269 void PartSet_SketcherMgr::onBeforeValuesChangedInPropertyPanel()
271 if (!isNestedEditOperation(getCurrentOperation(), myModule->sketchMgr()->activeSketch()) ||
272 myModule->sketchReentranceMgr()->isInternalEditActive())
274 // it is necessary to save current selection in order to restore it after the values are modifed
277 ModuleBase_IWorkshop* aWorkshop = myModule->workshop();
278 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(aWorkshop);
279 XGUI_Displayer* aDisplayer = aConnector->workshop()->displayer();
280 myPreviousUpdateViewerEnabled = aDisplayer->enableUpdateViewer(false);
283 void PartSet_SketcherMgr::onAfterValuesChangedInPropertyPanel()
285 if (!isNestedEditOperation(getCurrentOperation(), myModule->sketchMgr()->activeSketch()) ||
286 myModule->sketchReentranceMgr()->isInternalEditActive()) {
287 myModule->sketchReentranceMgr()->updateInternalEditActiveState();
290 // it is necessary to restore current selection in order to restore it after values are modified
292 myCurrentSelection.clear();
294 // 3. the flag to disable the update viewer should be set in order to avoid blinking in the
295 // viewer happens by deselect/select the modified objects. The flag should be restored after
296 // the selection processing. The update viewer should be also called.
297 ModuleBase_IWorkshop* aWorkshop = myModule->workshop();
298 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(aWorkshop);
299 XGUI_Displayer* aDisplayer = aConnector->workshop()->displayer();
300 aDisplayer->enableUpdateViewer(myPreviousUpdateViewerEnabled);
301 aDisplayer->updateViewer();
306 void PartSet_SketcherMgr::onMousePressed(ModuleBase_IViewWindow* theWnd, QMouseEvent* theEvent)
308 if (myModule->sketchReentranceMgr()->processMousePressed(theWnd, theEvent))
311 //get2dPoint(theWnd, theEvent, myClickedPoint);
313 if (!(theEvent->buttons() & Qt::LeftButton))
316 // Clear dragging mode
317 myIsDragging = false;
319 ModuleBase_IWorkshop* aWorkshop = myModule->workshop();
320 ModuleBase_IViewer* aViewer = aWorkshop->viewer();
321 if (!aViewer->canDragByMouse())
324 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>
325 (getCurrentOperation());
329 if (aFOperation->isEditOperation()) {
330 // If the current widget is a selector, do nothing, it processes the mouse press
331 ModuleBase_ModelWidget* anActiveWidget = getActiveWidget();
332 if(anActiveWidget && anActiveWidget->isViewerSelector()) {
337 // Use only for sketch operations
338 if (myCurrentSketch) {
339 if (!PartSet_Tools::sketchPlane(myCurrentSketch))
342 bool isSketcher = isSketchOperation(aFOperation);
343 bool isSketchOpe = isNestedSketchOperation(aFOperation);
345 // Avoid non-sketch operations
346 if ((!isSketchOpe) && (!isSketcher))
349 bool isEditing = aFOperation->isEditOperation();
351 // Ignore creation sketch operation
352 if ((!isSketcher) && (!isEditing))
355 Handle(AIS_InteractiveContext) aContext = aViewer->AISContext();
356 // Remember highlighted objects for editing
357 ModuleBase_ISelection* aSelect = aWorkshop->selection();
359 bool aHasShift = (theEvent->modifiers() & Qt::ShiftModifier);
360 storeSelection(!aHasShift);
362 if (myCurrentSelection.empty()) {
363 if (isSketchOpe && (!isSketcher))
364 // commit previous operation
365 if (!aFOperation->commit())
366 aFOperation->abort();
369 // Init flyout point for radius rotation
370 FeaturePtr aFeature = myCurrentSelection.begin().key();
372 get2dPoint(theWnd, theEvent, myCurrentPoint);
377 myPreviousDrawModeEnabled = aViewer->enableDrawMode(false);
378 // selection should be restored before edit operation start to process the
379 // selected entities, e.g. selection of point(attribute on a line) should edit the point
382 if (aFeature.get() != NULL) {
383 std::shared_ptr<SketchPlugin_Feature> aSPFeature =
384 std::dynamic_pointer_cast<SketchPlugin_Feature>(aFeature);
385 if (aSPFeature.get() &&
386 (aSPFeature->getKind() == SketchPlugin_ConstraintRadius::ID() ||
387 aSPFeature->getKind() == SketchPlugin_ConstraintAngle::ID())) {
388 DataPtr aData = aSPFeature->data();
389 AttributePtr aAttr = aData->attribute(SketchPlugin_Constraint::FLYOUT_VALUE_PNT());
390 std::shared_ptr<GeomDataAPI_Point2D> aFPAttr =
391 std::dynamic_pointer_cast<GeomDataAPI_Point2D>(aAttr);
392 aFPAttr->setValue(myCurrentPoint.myCurX, myCurrentPoint.myCurY);
395 } else if (isSketchOpe && isEditing) {
396 // If selected another object commit current result
397 aFOperation->commit();
402 myPreviousDrawModeEnabled = aViewer->enableDrawMode(false);
403 // selection should be restored before edit operation start to process the
404 // selected entities, e.g. selection of point(attribute on a line) should edit the point
407 if (aFeature.get() != NULL) {
408 std::shared_ptr<SketchPlugin_Feature> aSPFeature =
409 std::dynamic_pointer_cast<SketchPlugin_Feature>(aFeature);
410 if (aSPFeature.get() &&
411 (aSPFeature->getKind() == SketchPlugin_ConstraintRadius::ID() ||
412 aSPFeature->getKind() == SketchPlugin_ConstraintAngle::ID())) {
413 DataPtr aData = aSPFeature->data();
414 AttributePtr aAttr = aData->attribute(SketchPlugin_Constraint::FLYOUT_VALUE_PNT());
415 std::shared_ptr<GeomDataAPI_Point2D> aFPAttr =
416 std::dynamic_pointer_cast<GeomDataAPI_Point2D>(aAttr);
417 aFPAttr->setValue(myCurrentPoint.myCurX, myCurrentPoint.myCurY);
425 void PartSet_SketcherMgr::onMouseReleased(ModuleBase_IViewWindow* theWnd, QMouseEvent* theEvent)
427 if (myModule->sketchReentranceMgr()->processMouseReleased(theWnd, theEvent))
430 ModuleBase_IWorkshop* aWorkshop = myModule->workshop();
431 ModuleBase_IViewer* aViewer = aWorkshop->viewer();
432 if (!aViewer->canDragByMouse())
434 ModuleBase_Operation* aOp = getCurrentOperation();
436 if (isNestedSketchOperation(aOp)) {
437 // Only for sketcher operations
440 myCurrentSelection.clear();
446 aWorkshop->viewer()->enableDrawMode(myPreviousDrawModeEnabled);
447 myIsDragging = false;
449 ModuleBase_ModelWidget* anActiveWidget = getActiveWidget();
450 PartSet_MouseProcessor* aProcessor = dynamic_cast<PartSet_MouseProcessor*>(anActiveWidget);
452 aProcessor->mouseReleased(theWnd, theEvent);
455 void PartSet_SketcherMgr::onMouseMoved(ModuleBase_IViewWindow* theWnd, QMouseEvent* theEvent)
457 #ifdef DEBUG_SKETCH_ENTITIES_ON_MOVE
458 CompositeFeaturePtr aSketch = activeSketch();
460 std::cout << "mouse move SKETCH FEATURES [" << aSketch->numberOfSubs() << "]:" << std::endl;
462 for (int i = 0, aNbSubs = aSketch->numberOfSubs(); i < aNbSubs; i++) {
463 //std::cout << getFeatureInfo(aSketch->subFeature(i), false) << std::endl;
464 anInfo.append(ModuleBase_Tools::objectInfo(aSketch->subFeature(i)));
466 QString anInfoStr = anInfo.join("\n");
467 qDebug(QString("%1").arg(anInfo.size()).arg(anInfoStr).toStdString().c_str());
471 if (myModule->sketchReentranceMgr()->processMouseMoved(theWnd, theEvent))
474 if (isNestedCreateOperation(getCurrentOperation(), activeSketch())) {
475 // 1. perform the widget mouse move functionality and display the presentation
476 // the mouse move should be processed in the widget, if it can in order to visualize correct
477 // presentation. These widgets correct the feature attribute according to the mouse position
478 ModuleBase_ModelWidget* anActiveWidget = myModule->activeWidget();
479 PartSet_MouseProcessor* aProcessor = dynamic_cast<PartSet_MouseProcessor*>(anActiveWidget);
481 aProcessor->mouseMoved(theWnd, theEvent);
482 if (!myIsMouseOverViewProcessed) {
483 myIsMouseOverViewProcessed = true;
485 // the feature is to be erased here, but it is correct to call canDisplayObject because
486 // there can be additional check (e.g. editor widget in distance constraint)
487 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>
488 (getCurrentOperation());
490 FeaturePtr aFeature = aFOperation->feature();
491 visualizeFeature(aFeature, aFOperation->isEditOperation(), canDisplayObject(aFeature));
495 //myClickedPoint.clear();
498 // 1. the current selection is saved in the mouse press method in order to restore it after
500 // 2. the enable selection in the viewer should be temporary switched off in order to ignore
501 // mouse press signal in the viewer(it call Select for AIS context and the dragged objects are
502 // deselected). This flag should be restored in the slot, processed the mouse release signal.
504 ModuleBase_Operation* aCurrentOperation = getCurrentOperation();
505 if (!aCurrentOperation)
507 if (isSketchOperation(aCurrentOperation))
508 return; // No edit operation activated
510 Handle(V3d_View) aView = theWnd->v3dView();
511 gp_Pnt aPoint = PartSet_Tools::convertClickToPoint(theEvent->pos(), aView);
513 get2dPoint(theWnd, theEvent, aMousePnt);
514 double dX = aMousePnt.myCurX - myCurrentPoint.myCurX;
515 double dY = aMousePnt.myCurY - myCurrentPoint.myCurY;
517 ModuleBase_IWorkshop* aWorkshop = myModule->workshop();
518 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(aWorkshop);
519 XGUI_Displayer* aDisplayer = aConnector->workshop()->displayer();
520 // 3. the flag to disable the update viewer should be set in order to avoid blinking in the
521 // viewer happens by deselect/select the modified objects. The flag should be restored after
522 // the selection processing. The update viewer should be also called.
523 bool isEnableUpdateViewer = aDisplayer->enableUpdateViewer(false);
525 static Events_ID aMoveEvent = Events_Loop::eventByName(EVENT_OBJECT_MOVED);
526 //static Events_ID aUpdateEvent = Events_Loop::eventByName(EVENT_OBJECT_UPDATED);
527 FeatureToSelectionMap::const_iterator anIt = myCurrentSelection.begin(),
528 aLast = myCurrentSelection.end();
529 // 4. the features and attributes modification(move)
530 bool isModified = false;
531 for (; anIt != aLast; anIt++) {
532 FeaturePtr aFeature = anIt.key();
534 std::set<AttributePtr> anAttributes = anIt.value().first;
535 // Process selection by attribute: the priority to the attribute
536 if (!anAttributes.empty()) {
537 std::set<AttributePtr>::const_iterator anAttIt = anAttributes.begin(),
538 anAttLast = anAttributes.end();
539 for (; anAttIt != anAttLast; anAttIt++) {
540 AttributePtr anAttr = *anAttIt;
541 if (anAttr.get() == NULL)
543 std::string aAttrId = anAttr->id();
544 DataPtr aData = aFeature->data();
545 if (aData->isValid()) {
546 std::shared_ptr<GeomDataAPI_Point2D> aPoint =
547 std::dynamic_pointer_cast<GeomDataAPI_Point2D>(aData->attribute(aAttrId));
548 if (aPoint.get() != NULL) {
549 bool isImmutable = aPoint->setImmutable(true);
550 aPoint->move(dX, dY);
552 ModelAPI_EventCreator::get()->sendUpdated(aFeature, aMoveEvent);
553 aPoint->setImmutable(isImmutable);
558 // Process selection by feature
559 std::shared_ptr<SketchPlugin_Feature> aSketchFeature =
560 std::dynamic_pointer_cast<SketchPlugin_Feature>(aFeature);
561 if (aSketchFeature) {
562 aSketchFeature->move(dX, dY);
564 ModelAPI_EventCreator::get()->sendUpdated(aSketchFeature, aMoveEvent);
568 // the modified state of the current operation should be updated if there are features, which
571 aCurrentOperation->onValuesChanged();
573 Events_Loop::loop()->flush(aMoveEvent); // up all move events - to be processed in the solver
574 //Events_Loop::loop()->flush(aUpdateEvent); // up update events - to redisplay presentations
576 // 5. it is necessary to save current selection in order to restore it after the features moving
578 // 6. restore the update viewer flag and call this update
579 aDisplayer->enableUpdateViewer(isEnableUpdateViewer);
580 aDisplayer->updateViewer();
583 myCurrentPoint = aMousePnt;
587 void PartSet_SketcherMgr::onMouseDoubleClick(ModuleBase_IViewWindow* theWnd, QMouseEvent* theEvent)
589 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>
590 (getCurrentOperation());
591 if (aFOperation && aFOperation->isEditOperation()) {
592 std::string aId = aFOperation->id().toStdString();
593 if (isDistanceOperation(aFOperation))
595 // Activate dimension value editing on double click
596 ModuleBase_IPropertyPanel* aPanel = aFOperation->propertyPanel();
597 QList<ModuleBase_ModelWidget*> aWidgets = aPanel->modelWidgets();
598 // Find corresponded widget to activate value editing
599 foreach (ModuleBase_ModelWidget* aWgt, aWidgets) {
600 if (aWgt->attributeID() == SketchPlugin_Constraint::VALUE() ||
601 aWgt->attributeID() == SketchPlugin_ConstraintAngle::ANGLE_VALUE_ID()) {
602 PartSet_WidgetEditor* anEditor = dynamic_cast<PartSet_WidgetEditor*>(aWgt);
604 anEditor->showPopupEditor();
612 void PartSet_SketcherMgr::onApplicationStarted()
614 ModuleBase_IWorkshop* anIWorkshop = myModule->workshop();
615 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(anIWorkshop);
616 XGUI_Workshop* aWorkshop = aConnector->workshop();
617 PartSet_SketcherReetntrantMgr* aReentranceMgr = myModule->sketchReentranceMgr();
619 XGUI_PropertyPanel* aPropertyPanel = aWorkshop->propertyPanel();
620 if (aPropertyPanel) {
621 //connect(aPropertyPanel, SIGNAL(beforeWidgetActivated(ModuleBase_ModelWidget*)),
622 // this, SLOT(onBeforeWidgetActivated(ModuleBase_ModelWidget*)));
624 connect(aPropertyPanel, SIGNAL(noMoreWidgets(const std::string&)),
625 aReentranceMgr, SLOT(onNoMoreWidgets(const std::string&)));
626 connect(aPropertyPanel, SIGNAL(widgetActivated(ModuleBase_ModelWidget*)),
627 aReentranceMgr, SLOT(onWidgetActivated()));
630 XGUI_ViewerProxy* aViewerProxy = aWorkshop->viewer();
631 connect(aViewerProxy, SIGNAL(enterViewPort()), this, SLOT(onEnterViewPort()));
632 connect(aViewerProxy, SIGNAL(leaveViewPort()), this, SLOT(onLeaveViewPort()));
634 XGUI_ContextMenuMgr* aContextMenuMgr = aWorkshop->contextMenuMgr();
635 connect(aContextMenuMgr, SIGNAL(beforeContextMenu()), this, SLOT(onBeforeContextMenu()));
636 connect(aContextMenuMgr, SIGNAL(afterContextMenu()), this, SLOT(onAfterContextMenu()));
639 //void PartSet_SketcherMgr::onBeforeWidgetActivated(ModuleBase_ModelWidget* theWidget)
641 //if (!myClickedPoint.myIsInitialized)
644 //ModuleBase_Operation* aOperation = getCurrentOperation();
645 // the distance constraint feature should not use the clickedd point
646 // this is workaround in order to don't throw down the flyout point value,
647 // set by execute() method of these type of features
648 //if (isDistanceOperation(aOperation))
651 //PartSet_WidgetPoint2D* aPnt2dWgt = dynamic_cast<PartSet_WidgetPoint2D*>(theWidget);
653 // aPnt2dWgt->setPoint(myClickedPoint.myCurX, myClickedPoint.myCurY);
657 void PartSet_SketcherMgr::onBeforeContextMenu()
659 myIsPopupMenuActive = true;
662 void PartSet_SketcherMgr::onAfterContextMenu()
664 myIsPopupMenuActive = false;
667 void PartSet_SketcherMgr::get2dPoint(ModuleBase_IViewWindow* theWnd, QMouseEvent* theEvent,
670 Handle(V3d_View) aView = theWnd->v3dView();
671 gp_Pnt aPoint = PartSet_Tools::convertClickToPoint(theEvent->pos(), aView);
673 PartSet_Tools::convertTo2D(aPoint, myCurrentSketch, aView, aX, anY);
674 thePoint.setValue(aX, anY);
677 void PartSet_SketcherMgr::launchEditing()
679 if (!myCurrentSelection.empty()) {
680 FeaturePtr aFeature = myCurrentSelection.begin().key();
681 std::shared_ptr<SketchPlugin_Feature> aSPFeature =
682 std::dynamic_pointer_cast<SketchPlugin_Feature>(aFeature);
683 if (aSPFeature && (!aSPFeature->isExternal())) {
684 myModule->editFeature(aSPFeature);
689 bool PartSet_SketcherMgr::sketchSolverError()
691 bool anError = false;
692 CompositeFeaturePtr aSketch = activeSketch();
694 AttributeStringPtr aAttributeString = aSketch->string(SketchPlugin_Sketch::SOLVER_ERROR());
695 anError = !aAttributeString->value().empty();
700 QString PartSet_SketcherMgr::getFeatureError(const FeaturePtr& theFeature)
703 if (!theFeature.get() || !theFeature->data()->isValid())
706 CompositeFeaturePtr aSketch = activeSketch();
707 if (aSketch.get() && aSketch == theFeature) {
708 std::string aSolverError = aSketch->string(SketchPlugin_Sketch::SOLVER_ERROR())->value();
709 anError = ModuleBase_Tools::translate(aSketch->getKind(), aSolverError);
714 void PartSet_SketcherMgr::clearClickedFlags()
716 //myClickedPoint.clear();
717 myCurrentPoint.clear();
720 const QStringList& PartSet_SketcherMgr::replicationsIdList()
722 static QStringList aReplicationIds;
723 if (aReplicationIds.size() == 0) {
724 aReplicationIds << SketchPlugin_ConstraintMirror::ID().c_str();
725 aReplicationIds << SketchPlugin_MultiRotation::ID().c_str();
726 aReplicationIds << SketchPlugin_MultiTranslation::ID().c_str();
728 return aReplicationIds;
731 const QStringList& PartSet_SketcherMgr::constraintsIdList()
733 static QStringList aConstraintIds;
734 if (aConstraintIds.size() == 0) {
735 aConstraintIds << SketchPlugin_ConstraintLength::ID().c_str();
736 aConstraintIds << SketchPlugin_ConstraintDistance::ID().c_str();
737 aConstraintIds << SketchPlugin_ConstraintRigid::ID().c_str();
738 aConstraintIds << SketchPlugin_ConstraintRadius::ID().c_str();
739 aConstraintIds << SketchPlugin_ConstraintPerpendicular::ID().c_str();
740 aConstraintIds << SketchPlugin_ConstraintParallel::ID().c_str();
741 aConstraintIds << SketchPlugin_ConstraintHorizontal::ID().c_str();
742 aConstraintIds << SketchPlugin_ConstraintVertical::ID().c_str();
743 aConstraintIds << SketchPlugin_ConstraintEqual::ID().c_str();
744 aConstraintIds << SketchPlugin_ConstraintTangent::ID().c_str();
745 aConstraintIds << SketchPlugin_ConstraintCoincidence::ID().c_str();
746 aConstraintIds << SketchPlugin_ConstraintAngle::ID().c_str();
747 aConstraintIds << SketchPlugin_ConstraintCollinear::ID().c_str();
748 aConstraintIds << SketchPlugin_ConstraintMiddle::ID().c_str();
749 aConstraintIds << SketchPlugin_ConstraintMirror::ID().c_str();
750 aConstraintIds << SketchPlugin_MultiTranslation::ID().c_str();
751 aConstraintIds << SketchPlugin_MultiRotation::ID().c_str();
753 return aConstraintIds;
756 void PartSet_SketcherMgr::sketchSelectionModes(QIntList& theModes)
760 theModes.append(SketcherPrs_Tools::Sel_Dimension_Text);
761 theModes.append(SketcherPrs_Tools::Sel_Dimension_Line);
762 theModes.append(SketcherPrs_Tools::Sel_Constraint);
763 theModes.append(TopAbs_VERTEX);
764 theModes.append(TopAbs_EDGE);
767 Handle(AIS_InteractiveObject) PartSet_SketcherMgr::createPresentation(const ResultPtr& theResult)
769 Handle(AIS_InteractiveObject) aPrs;
771 FeaturePtr aFeature = ModelAPI_Feature::feature(theResult);
772 if (aFeature.get() && aFeature->getKind() == SketchPlugin_Sketch::ID()) {
773 aPrs = new PartSet_ResultSketchPrs(theResult);
778 bool PartSet_SketcherMgr::isSketchOperation(ModuleBase_Operation* theOperation)
780 return theOperation && theOperation->id().toStdString() == SketchPlugin_Sketch::ID();
783 bool PartSet_SketcherMgr::isNestedSketchOperation(ModuleBase_Operation* theOperation) const
785 bool aNestedSketch = false;
787 FeaturePtr anActiveSketch = activeSketch();
788 if (anActiveSketch.get() && theOperation) {
789 ModuleBase_Operation* aSketchOperation = operationMgr()->findOperation(
790 anActiveSketch->getKind().c_str());
791 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>
793 if (aSketchOperation && aFOperation) {
794 FeaturePtr aFeature = aFOperation->feature();
795 if (aFeature.get()) {
796 QStringList aGrantedOpIds = aSketchOperation->grantedOperationIds();
797 aNestedSketch = aGrantedOpIds.contains(aFeature->getKind().c_str());
801 return aNestedSketch;
804 bool PartSet_SketcherMgr::isNestedCreateOperation(ModuleBase_Operation* theOperation,
805 const CompositeFeaturePtr& theSketch) const
807 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>
809 return aFOperation && !aFOperation->isEditOperation() &&
810 isNestedSketchOperation(aFOperation);
813 bool PartSet_SketcherMgr::isNestedEditOperation(ModuleBase_Operation* theOperation,
814 const CompositeFeaturePtr& theSketch) const
816 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>
818 return aFOperation && aFOperation->isEditOperation() &&
819 isNestedSketchOperation(aFOperation);
822 bool PartSet_SketcherMgr::isEntity(const std::string& theId)
824 return (theId == SketchPlugin_Line::ID()) ||
825 (theId == SketchPlugin_Point::ID()) ||
826 (theId == SketchPlugin_Arc::ID()) ||
827 (theId == SketchPlugin_Circle::ID());
830 bool PartSet_SketcherMgr::isDistanceOperation(ModuleBase_Operation* theOperation)
832 std::string anId = theOperation ? theOperation->id().toStdString() : "";
834 return isDistanceKind(anId);
837 bool PartSet_SketcherMgr::isDistanceKind(std::string& theKind)
839 return (theKind == SketchPlugin_ConstraintLength::ID()) ||
840 (theKind == SketchPlugin_ConstraintDistance::ID()) ||
841 (theKind == SketchPlugin_ConstraintRadius::ID()) ||
842 (theKind == SketchPlugin_ConstraintAngle::ID());
845 void PartSet_SketcherMgr::startSketch(ModuleBase_Operation* theOperation)
847 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>
848 (getCurrentOperation());
852 myModule->onViewTransformed();
854 // Display all sketcher sub-Objects
855 myCurrentSketch = std::dynamic_pointer_cast<ModelAPI_CompositeFeature>(aFOperation->feature());
856 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(myModule->workshop());
858 // Hide sketcher result
859 std::list<ResultPtr> aResults = myCurrentSketch->results();
860 std::list<ResultPtr>::const_iterator aIt;
861 for (aIt = aResults.begin(); aIt != aResults.end(); ++aIt) {
862 (*aIt)->setDisplayed(false);
864 myCurrentSketch->setDisplayed(false);
866 // Remove invalid sketch entities
867 std::set<FeaturePtr> anInvalidFeatures;
868 ModelAPI_ValidatorsFactory* aFactory = ModelAPI_Session::get()->validators();
869 for (int i = 0; i < myCurrentSketch->numberOfSubs(); i++) {
870 FeaturePtr aFeature = myCurrentSketch->subFeature(i);
871 if (aFeature.get()) {
872 if (!aFactory->validate(aFeature))
873 anInvalidFeatures.insert(aFeature);
876 if (!anInvalidFeatures.empty()) {
877 std::map<FeaturePtr, std::set<FeaturePtr> > aReferences;
878 ModelAPI_Tools::findAllReferences(anInvalidFeatures, aReferences, false);
880 std::set<FeaturePtr>::const_iterator anIt = anInvalidFeatures.begin(),
881 aLast = anInvalidFeatures.end();
882 // separate features to references to parameter features and references to others
883 QStringList anInvalidFeatureNames;
884 for (; anIt != aLast; anIt++) {
885 FeaturePtr aFeature = *anIt;
887 anInvalidFeatureNames.append(aFeature->name().c_str());
889 std::string aPrefixInfo = QString("Invalid features of the sketch will be deleted: %1.\n\n").
890 arg(anInvalidFeatureNames.join(", ")).toStdString().c_str();
891 std::set<FeaturePtr> aFeatureRefsToDelete;
892 if (ModuleBase_Tools::askToDelete(anInvalidFeatures, aReferences, aConnector->desktop(),
893 aFeatureRefsToDelete, aPrefixInfo)) {
894 if (!aFeatureRefsToDelete.empty())
895 anInvalidFeatures.insert(aFeatureRefsToDelete.begin(), aFeatureRefsToDelete.end());
896 ModelAPI_Tools::removeFeatures(anInvalidFeatures, true);
897 Events_Loop::loop()->flush(Events_Loop::eventByName(EVENT_OBJECT_UPDATED));
898 // TODO: call the next method in the XGUI_OperationMgr::onOperationStarted().
899 workshop()->errorMgr()->updateAcceptAllAction(myCurrentSketch);
903 // Display sketcher objects
905 for (int i = 0; i < myCurrentSketch->numberOfSubs(); i++) {
906 FeaturePtr aFeature = myCurrentSketch->subFeature(i);
907 #ifdef DEBUG_SKETCHER_ENTITIES
908 anInfo.append(ModuleBase_Tools::objectInfo(aFeature));
910 std::list<ResultPtr> aResults = aFeature->results();
911 std::list<ResultPtr>::const_iterator aIt;
912 for (aIt = aResults.begin(); aIt != aResults.end(); ++aIt) {
913 (*aIt)->setDisplayed(true);
915 aFeature->setDisplayed(true);
917 #ifdef DEBUG_SKETCHER_ENTITIES
918 QString anInfoStr = anInfo.join(";\t");
919 qDebug(QString("startSketch: %1, %2").arg(anInfo.size()).arg(anInfoStr).toStdString().c_str());
922 if(myCirclePointFilter.IsNull()) {
923 myCirclePointFilter = new PartSet_CirclePointFilter(myModule->workshop());
926 myModule->workshop()->viewer()->addSelectionFilter(myCirclePointFilter);
928 if (myPlaneFilter.IsNull())
929 myPlaneFilter = new ModuleBase_ShapeInPlaneFilter();
931 myModule->workshop()->viewer()->addSelectionFilter(myPlaneFilter);
932 bool aHasPlane = false;
933 std::shared_ptr<GeomAPI_Pln> aPln;
934 aPln = PartSet_Tools::sketchPlane(myCurrentSketch);
935 myPlaneFilter->setPlane(aPln);
937 Events_Loop::loop()->flush(Events_Loop::eventByName(EVENT_OBJECT_TO_REDISPLAY));
938 // all displayed objects should be activated in current selection modes according to switched
941 aConnector->activateModuleSelectionModes();
944 void PartSet_SketcherMgr::stopSketch(ModuleBase_Operation* theOperation)
946 myIsMouseOverWindow = false;
947 myIsConstraintsShown[PartSet_Tools::Geometrical] = true;
948 myIsConstraintsShown[PartSet_Tools::Dimensional] = true;
949 myIsConstraintsShown[PartSet_Tools::Expressions] = false;
951 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(myModule->workshop());
953 DataPtr aData = myCurrentSketch->data();
954 if (!aData->isValid()) {
955 XGUI_Displayer* aDisplayer = aConnector->workshop()->displayer();
956 // The sketch was aborted
957 myCurrentSketch = CompositeFeaturePtr();
958 // TODO: move this outside of if-else
959 myModule->workshop()->viewer()->removeSelectionFilter(myCirclePointFilter);
960 myModule->workshop()->viewer()->removeSelectionFilter(myPlaneFilter);
962 // Erase all sketcher objects
963 QObjectPtrList aObjects = aDisplayer->displayedObjects();
964 foreach (ObjectPtr aObj, aObjects) {
965 DataPtr aObjData = aObj->data();
966 if (!aObjData->isValid())
967 aObj->setDisplayed(false);
971 // Hide all sketcher sub-Objects
972 for (int i = 0; i < myCurrentSketch->numberOfSubs(); i++) {
973 FeaturePtr aFeature = myCurrentSketch->subFeature(i);
974 std::list<ResultPtr> aResults = aFeature->results();
975 std::list<ResultPtr>::const_iterator aIt;
976 for (aIt = aResults.begin(); aIt != aResults.end(); ++aIt) {
977 (*aIt)->setDisplayed(false);
979 aFeature->setDisplayed(false);
981 // Display sketcher result
982 std::list<ResultPtr> aResults = myCurrentSketch->results();
983 std::list<ResultPtr>::const_iterator aIt;
984 Events_Loop* aLoop = Events_Loop::loop();
985 static Events_ID aDispEvent = aLoop->eventByName(EVENT_OBJECT_TO_REDISPLAY);
987 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>
989 for (aIt = aResults.begin(); aIt != aResults.end(); ++aIt) {
990 if (!aFOperation->isDisplayedOnStart(*aIt)) {
991 (*aIt)->setDisplayed(true);
992 // this display event is needed because sketch already may have "displayed" state,
993 // but not displayed while it is still active (issue 613, abort of existing sketch)
994 ModelAPI_EventCreator::get()->sendUpdated(*aIt, aDispEvent);
997 if (!aFOperation->isDisplayedOnStart(myCurrentSketch))
998 myCurrentSketch->setDisplayed(true);
1000 myCurrentSketch = CompositeFeaturePtr();
1002 myModule->workshop()->viewer()->removeSelectionFilter(myCirclePointFilter);
1003 myModule->workshop()->viewer()->removeSelectionFilter(myPlaneFilter);
1005 Events_Loop::loop()->flush(aDispEvent);
1007 // restore the module selection modes, which were changed on startSketch
1008 aConnector->activateModuleSelectionModes();
1011 void PartSet_SketcherMgr::startNestedSketch(ModuleBase_Operation* theOperation)
1013 if (canChangeCursor(theOperation) && myIsMouseOverWindow) {
1014 QCursor* aCurrentCursor = QApplication::overrideCursor();
1015 if (!aCurrentCursor || aCurrentCursor->shape() != Qt::CrossCursor) {
1016 QApplication::setOverrideCursor(QCursor(Qt::CrossCursor));
1018 qDebug("startNestedSketch() : Qt::CrossCursor");
1024 void PartSet_SketcherMgr::stopNestedSketch(ModuleBase_Operation* theOperation)
1026 myIsMouseOverViewProcessed = true;
1027 operationMgr()->onValidateOperation();
1028 // when sketch nested operation is stopped the cursor should be restored unconditionally
1029 //if (canChangeCursor(theOperation)) {
1030 QApplication::restoreOverrideCursor();
1032 qDebug("stopNestedSketch() : None");
1035 /// improvement to deselect automatically all eventual selected objects, when
1036 // returning to the neutral point of the Sketcher
1037 workshop()->selector()->clearSelection();
1040 void PartSet_SketcherMgr::commitNestedSketch(ModuleBase_Operation* theOperation)
1042 if (isNestedCreateOperation(theOperation, activeSketch())) {
1043 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>
1046 FeaturePtr aFeature = aFOperation->feature();
1047 // it is necessary to check the the feature data validity because
1048 // some kind of features are removed by an operation commit(the macro state of a feature)
1049 if (aFeature.get() && aFeature->data()->isValid()) {
1050 visualizeFeature(aFeature, aFOperation->isEditOperation(), true);
1056 void PartSet_SketcherMgr::activatePlaneFilter(const bool& toActivate)
1059 myModule->workshop()->viewer()->addSelectionFilter(myPlaneFilter);
1061 myModule->workshop()->viewer()->removeSelectionFilter(myPlaneFilter);
1064 bool PartSet_SketcherMgr::operationActivatedByPreselection()
1066 bool isOperationStopped = false;
1067 ModuleBase_Operation* anOperation = getCurrentOperation();
1068 if(anOperation && isNestedSketchOperation(anOperation)) {
1069 // Set final definitions if they are necessary
1070 //propertyPanelDefined(aOperation);
1071 /// Commit sketcher operations automatically
1072 /// distance operation are able to show popup editor to modify the distance value
1073 /// after entering the value, the operation should be committed/aborted(by Esc key)
1074 bool aCanCommitOperation = true;
1075 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>
1077 if (aFOperation && PartSet_SketcherMgr::isDistanceOperation(aFOperation)) {
1078 bool aValueAccepted = setDistanceValueByPreselection(anOperation, myModule->workshop(),
1079 aCanCommitOperation);
1080 if (!aValueAccepted)
1081 return isOperationStopped;
1084 if (aCanCommitOperation)
1085 isOperationStopped = anOperation->commit();
1087 anOperation->abort();
1088 isOperationStopped = true;
1091 return isOperationStopped;
1094 bool PartSet_SketcherMgr::canUndo() const
1096 return isNestedCreateOperation(getCurrentOperation(), activeSketch());
1099 bool PartSet_SketcherMgr::canRedo() const
1101 return isNestedCreateOperation(getCurrentOperation(), activeSketch());
1104 bool PartSet_SketcherMgr::canEraseObject(const ObjectPtr& theObject) const
1106 bool aCanErase = true;
1107 // when the sketch operation is active, results of sketch sub-feature can not be hidden
1108 if (myCurrentSketch.get()) {
1109 return !isObjectOfSketch(theObject);
1114 bool PartSet_SketcherMgr::canDisplayObject(const ObjectPtr& theObject) const
1116 bool aCanDisplay = true;
1118 bool aHasActiveSketch = activeSketch().get() != NULL;
1119 if (aHasActiveSketch) {
1120 // 1. the sketch feature should not be displayed during the sketch active operation
1121 // it is hidden by a sketch operation start and shown by a sketch stop, just the sketch
1122 // nested features can be visualized
1123 FeaturePtr aFeature = ModelAPI_Feature::feature(theObject);
1124 if (aFeature.get() != NULL && aFeature == activeSketch()) {
1125 aCanDisplay = false;
1127 std::shared_ptr<SketchPlugin_Feature> aSketchFeature =
1128 std::dynamic_pointer_cast<SketchPlugin_Feature>(aFeature);
1129 /// some sketch entities should be never shown, e.g. projection feature
1130 if (aSketchFeature.get())
1131 aCanDisplay = aSketchFeature->canBeDisplayed();
1133 else { // there are no an active sketch
1134 // 2. sketch sub-features should not be visualized if the sketch operation is not active
1135 FeaturePtr aFeature = ModelAPI_Feature::feature(theObject);
1136 if (aFeature.get() != NULL) {
1137 std::shared_ptr<SketchPlugin_Feature> aSketchFeature =
1138 std::dynamic_pointer_cast<SketchPlugin_Feature>(aFeature);
1139 if (aSketchFeature.get()) {
1140 aCanDisplay = false;
1145 // 3. the method should not filter the objects, which are not related to the current operation.
1146 // The object is filtered just if it is a current operation feature or this feature result
1148 bool isObjectFound = false;
1149 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>
1150 (getCurrentOperation());
1152 FeaturePtr aFeature = aFOperation->feature();
1153 if (aFeature.get()) {
1154 std::list<ResultPtr> aResults = aFeature->results();
1155 if (theObject == aFeature)
1156 isObjectFound = true;
1158 std::list<ResultPtr>::const_iterator anIt = aResults.begin(), aLast = aResults.end();
1159 for (; anIt != aLast && !isObjectFound; anIt++) {
1160 isObjectFound = *anIt == theObject;
1165 if (isObjectFound) {
1166 // 4. For created nested feature operation do not display the created feature if
1167 // the mouse curstor leaves the OCC window.
1168 // The correction cases, which ignores this condition:
1169 // a. the property panel values modification
1170 // b. the popup menu activated
1171 // c. widget editor control
1172 #ifndef DEBUG_DO_NOT_BY_ENTER
1173 if (isNestedCreateOperation(getCurrentOperation(), activeSketch())) {
1174 ModuleBase_ModelWidget* anActiveWidget = getActiveWidget();
1175 ModuleBase_WidgetEditor* anEditorWdg =
1176 anActiveWidget ? dynamic_cast<ModuleBase_WidgetEditor*>(anActiveWidget) : 0;
1177 // the active widget editor should not influence here. The presentation should be visible
1178 // always when this widget is active.
1179 if (!anEditorWdg && !myIsPopupMenuActive) {
1180 // during a nested create operation, the feature is redisplayed only
1181 // if the mouse over view
1182 // of there was a value modified in the property panel after the mouse left the view
1183 aCanDisplay = canDisplayCurrentCreatedFeature();
1190 // checks the sketcher constraints visibility according to active sketch check box states
1192 bool aProcessed = false;
1193 FeaturePtr aFeature = ModelAPI_Feature::feature(theObject);
1194 if (aFeature.get()) {
1195 bool aConstraintDisplayed = canDisplayConstraint(aFeature, PartSet_Tools::Any, aProcessed);
1197 aCanDisplay = aConstraintDisplayed;
1204 bool PartSet_SketcherMgr::canDisplayConstraint(const FeaturePtr& theFeature,
1205 const PartSet_Tools::ConstraintVisibleState& theState,
1206 bool& isProcessed) const
1208 bool aSwitchedOn = true;
1210 const QStringList& aConstrIds = constraintsIdList();
1212 std::string aKind = theFeature->getKind();
1213 if (aConstrIds.contains(QString(aKind.c_str()))) {
1214 bool isTypedConstraint = false;
1217 case PartSet_Tools::Dimensional: {
1218 bool isDistance = isDistanceKind(aKind);
1221 aSwitchedOn = myIsConstraintsShown[theState];
1225 case PartSet_Tools::Geometrical: {
1226 bool isGeometrical = !isDistanceKind(aKind);
1227 if (isGeometrical) {
1229 aSwitchedOn = myIsConstraintsShown[theState];
1233 case PartSet_Tools::Any: {
1235 bool isDistance = isDistanceKind(aKind);
1237 aSwitchedOn = myIsConstraintsShown[PartSet_Tools::Dimensional];
1239 aSwitchedOn = myIsConstraintsShown[PartSet_Tools::Geometrical];
1249 /*void PartSet_SketcherMgr::processHiddenObject(const std::list<ObjectPtr>& theObjects)
1251 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>
1252 (getCurrentOperation());
1253 if (aFOperation && myCurrentSketch.get()) {
1254 // find results of the current operation
1255 // these results should not be proposed to be deleted
1256 FeaturePtr anOperationFeature = aFOperation->feature();
1257 std::list<ResultPtr> anOperationResultList = anOperationFeature->results();
1258 std::set<ResultPtr> anOperationResults;
1259 std::list<ResultPtr>::const_iterator aRIt = anOperationResultList.begin(),
1260 aRLast = anOperationResultList.end();
1261 for (; aRIt != aRLast; aRIt++)
1262 anOperationResults.insert(*aRIt);
1264 std::set<FeaturePtr> anObjectsToBeDeleted;
1265 QStringList anObjectsToBeDeletedNames;
1266 std::list<ObjectPtr>::const_iterator anIt = theObjects.begin(), aLast = theObjects.end();
1267 for (; anIt != aLast; anIt++) {
1268 ObjectPtr anObject = *anIt;
1269 bool aCanErase = true;
1270 // when the sketch operation is active, results of sketch sub-feature can not be hidden
1271 ResultPtr aResult = std::dynamic_pointer_cast<ModelAPI_Result>(anObject);
1272 // the result is found between current feature results
1273 if (anOperationResults.find(aResult) != anOperationResults.end())
1276 if (aResult.get()) {
1277 // Display sketcher objects
1278 for (int i = 0; i < myCurrentSketch->numberOfSubs() && aCanErase; i++) {
1279 FeaturePtr aFeature = myCurrentSketch->subFeature(i);
1280 std::list<ResultPtr> aResults = aFeature->results();
1281 std::list<ResultPtr>::const_iterator anIt;
1282 for (anIt = aResults.begin(); anIt != aResults.end() && aCanErase; ++anIt) {
1283 aCanErase = *anIt != aResult;
1288 FeaturePtr aFeature = ModelAPI_Feature::feature(anObject);
1289 if (aFeature.get() && anObjectsToBeDeleted.find(aFeature) == anObjectsToBeDeleted.end()) {
1290 anObjectsToBeDeleted.insert(aFeature);
1291 anObjectsToBeDeletedNames.append(aFeature->name().c_str());
1295 if (!anObjectsToBeDeleted.empty()) {
1296 QString aFeatureNames = anObjectsToBeDeletedNames.join(", ");
1297 QString aMessage = tr("The following features have incorrect presentation and \
1298 will be hidden: %1. Would you like to delete them?")
1299 .arg(aFeatureNames);
1300 int anAnswer = QMessageBox::question(qApp->activeWindow(), tr("Features hide"),
1301 aMessage, QMessageBox::Ok | QMessageBox::Cancel,
1302 QMessageBox::Cancel);
1303 if (anAnswer == QMessageBox::Ok) {
1304 QObjectPtrList anObjects;
1305 std::set<FeaturePtr>::const_iterator anIt = anObjectsToBeDeleted.begin(),
1306 aLast = anObjectsToBeDeleted.end();
1307 for (; anIt != aLast; anIt++)
1308 anObjects.append(*anIt);
1309 SessionPtr aMgr = ModelAPI_Session::get();
1310 DocumentPtr aDoc = aMgr->activeDocument();
1311 bool aIsOp = aMgr->isOperation();
1313 aMgr->startOperation();
1314 workshop()->deleteFeatures(anObjects);
1315 //static Events_ID aDeletedEvent = Events_Loop::eventByName(EVENT_OBJECT_DELETED);
1316 //static Events_ID aRedispEvent = Events_Loop::eventByName(EVENT_OBJECT_TO_REDISPLAY);
1317 //Events_Loop::loop()->flush(aDeletedEvent);
1318 //Events_Loop::loop()->flush(aRedispEvent);
1321 aMgr->finishOperation();
1327 bool PartSet_SketcherMgr::canDisplayCurrentCreatedFeature() const
1329 bool aCanDisplay = myIsMouseOverWindow;
1331 ModuleBase_ModelWidget* anActiveWidget = getActiveWidget();
1333 aCanDisplay = anActiveWidget->getValueState() == ModuleBase_ModelWidget::Stored;
1338 bool PartSet_SketcherMgr::canChangeCursor(ModuleBase_Operation* theOperation) const
1340 return isNestedCreateOperation(theOperation, activeSketch()) ||
1341 myModule->sketchReentranceMgr()->isInternalEditActive();
1344 const QMap<PartSet_Tools::ConstraintVisibleState, bool>& PartSet_SketcherMgr::showConstraintStates()
1346 return myIsConstraintsShown;
1349 bool PartSet_SketcherMgr::isObjectOfSketch(const ObjectPtr& theObject) const
1351 bool isFoundObject = false;
1353 FeaturePtr anObjectFeature = ModelAPI_Feature::feature(theObject);
1354 if (anObjectFeature.get()) {
1355 int aSize = myCurrentSketch->numberOfSubs();
1356 for (int i = 0; i < myCurrentSketch->numberOfSubs() && !isFoundObject; i++) {
1357 FeaturePtr aCurrentFeature = myCurrentSketch->subFeature(i);
1358 isFoundObject = myCurrentSketch->subFeature(i) == anObjectFeature;
1361 return isFoundObject;
1364 void PartSet_SketcherMgr::onPlaneSelected(const std::shared_ptr<GeomAPI_Pln>& thePln)
1366 if (myPlaneFilter.IsNull())
1367 myPlaneFilter = new ModuleBase_ShapeInPlaneFilter();
1369 myPlaneFilter->setPlane(thePln);
1372 bool PartSet_SketcherMgr::setDistanceValueByPreselection(ModuleBase_Operation* theOperation,
1373 ModuleBase_IWorkshop* theWorkshop,
1374 bool& theCanCommitOperation)
1376 bool isValueAccepted = false;
1377 theCanCommitOperation = false;
1379 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>
1381 FeaturePtr aFeature = aFOperation->feature();
1382 // editor is shown only if all attribute references are filled by preseletion
1383 bool anAllRefAttrInitialized = true;
1385 std::list<AttributePtr> aRefAttrs = aFeature->data()->attributes(
1386 ModelAPI_AttributeRefAttr::typeId());
1387 std::list<AttributePtr>::const_iterator anIt = aRefAttrs.begin(), aLast = aRefAttrs.end();
1388 for (; anIt != aLast && anAllRefAttrInitialized; anIt++) {
1389 anAllRefAttrInitialized = (*anIt)->isInitialized();
1391 if (anAllRefAttrInitialized) {
1392 // Activate dimension value editing on double click
1393 ModuleBase_IPropertyPanel* aPanel = aFOperation->propertyPanel();
1394 QList<ModuleBase_ModelWidget*> aWidgets = aPanel->modelWidgets();
1395 // Find corresponded widget to activate value editing
1396 foreach (ModuleBase_ModelWidget* aWgt, aWidgets) {
1397 if (aWgt->attributeID() == "ConstraintValue") {
1398 // the featue should be displayed in order to find the AIS text position,
1399 // the place where the editor will be shown
1400 aFeature->setDisplayed(true);
1401 /// the execute is necessary to perform in the feature compute for flyout position
1402 aFeature->execute();
1404 Events_Loop::loop()->flush(Events_Loop::eventByName(EVENT_OBJECT_CREATED));
1405 Events_Loop::loop()->flush(Events_Loop::eventByName(EVENT_OBJECT_TO_REDISPLAY));
1407 PartSet_WidgetEditor* anEditor = dynamic_cast<PartSet_WidgetEditor*>(aWgt);
1409 int aX = 0, anY = 0;
1411 XGUI_Workshop* aWorkshop = XGUI_Tools::workshop(theWorkshop);
1412 XGUI_Displayer* aDisplayer = aWorkshop->displayer();
1413 AISObjectPtr anAIS = aDisplayer->getAISObject(aFeature);
1414 Handle(AIS_InteractiveObject) anAISIO;
1415 if (anAIS.get() != NULL) {
1416 anAISIO = anAIS->impl<Handle(AIS_InteractiveObject)>();
1418 if (anAIS.get() != NULL) {
1419 Handle(AIS_InteractiveObject) anAISIO = anAIS->impl<Handle(AIS_InteractiveObject)>();
1421 if (!anAISIO.IsNull()) {
1422 Handle(AIS_Dimension) aDim = Handle(AIS_Dimension)::DownCast(anAISIO);
1423 if (!aDim.IsNull()) {
1424 gp_Pnt aPosition = aDim->GetTextPosition();
1426 ModuleBase_IViewer* aViewer = aWorkshop->viewer();
1427 Handle(V3d_View) aView = aViewer->activeView();
1429 aView->Convert(aPosition.X(), aPosition.Y(), aPosition.Z(), aCX, aCY);
1431 QWidget* aViewPort = aViewer->activeViewPort();
1432 QPoint aGlPoint = aViewPort->mapToGlobal(QPoint(aCX, aCY));
1437 anEditor->setCursorPosition(aX, anY);
1438 isValueAccepted = anEditor->showPopupEditor(false);
1439 theCanCommitOperation = true;
1445 return isValueAccepted;
1448 void PartSet_SketcherMgr::getSelectionOwners(const FeaturePtr& theFeature,
1449 const FeaturePtr& theSketch,
1450 ModuleBase_IWorkshop* theWorkshop,
1451 const FeatureToSelectionMap& theSelection,
1452 SelectMgr_IndexedMapOfOwner& theOwnersToSelect)
1454 if (theFeature.get() == NULL)
1457 FeatureToSelectionMap::const_iterator anIt = theSelection.find(theFeature);
1458 std::set<AttributePtr> aSelectedAttributes = anIt.value().first;
1459 std::set<ResultPtr> aSelectedResults = anIt.value().second;
1461 ModuleBase_IViewer* aViewer = theWorkshop->viewer();
1463 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(theWorkshop);
1464 XGUI_Displayer* aDisplayer = aConnector->workshop()->displayer();
1466 // 1. found the feature's owners. Check the AIS objects of the constructions
1467 AISObjectPtr aAISObj = aDisplayer->getAISObject(theFeature);
1468 if (aAISObj.get() != NULL && aSelectedAttributes.empty() && aSelectedResults.empty()) {
1469 Handle(AIS_InteractiveObject) anAISIO = aAISObj->impl<Handle(AIS_InteractiveObject)>();
1471 SelectMgr_IndexedMapOfOwner aSelectedOwners;
1472 aConnector->workshop()->selector()->selection()->entityOwners(anAISIO, aSelectedOwners);
1473 for (Standard_Integer i = 1, n = aSelectedOwners.Extent(); i <= n; i++) {
1474 Handle(SelectMgr_EntityOwner) anOwner = aSelectedOwners(i);
1475 if (!anOwner.IsNull())
1476 theOwnersToSelect.Add(anOwner);
1480 // 2. found the feature results's owners
1481 std::list<ResultPtr> aResults = theFeature->results();
1482 std::list<ResultPtr>::const_iterator aIt;
1483 for (aIt = aResults.begin(); aIt != aResults.end(); ++aIt)
1485 ResultPtr aResult = *aIt;
1486 AISObjectPtr aAISObj = aDisplayer->getAISObject(aResult);
1487 if (aAISObj.get() == NULL)
1489 Handle(AIS_InteractiveObject) anAISIO = aAISObj->impl<Handle(AIS_InteractiveObject)>();
1491 SelectMgr_IndexedMapOfOwner aSelectedOwners;
1492 aConnector->workshop()->selector()->selection()->entityOwners(anAISIO, aSelectedOwners);
1493 for ( Standard_Integer i = 1, n = aSelectedOwners.Extent(); i <= n; i++ ) {
1494 Handle(StdSelect_BRepOwner) anOwner =
1495 Handle(StdSelect_BRepOwner)::DownCast(aSelectedOwners(i));
1496 if ( anOwner.IsNull() || !anOwner->HasShape() )
1498 const TopoDS_Shape& aShape = anOwner->Shape();
1499 TopAbs_ShapeEnum aShapeType = aShape.ShapeType();
1500 if (aShapeType == TopAbs_VERTEX) {
1501 AttributePtr aPntAttr =
1502 PartSet_Tools::findAttributeBy2dPoint(theFeature, aShape, theSketch);
1503 if (aPntAttr.get() != NULL &&
1504 aSelectedAttributes.find(aPntAttr) != aSelectedAttributes.end()) {
1505 theOwnersToSelect.Add(anOwner);
1508 else if (aShapeType == TopAbs_EDGE) {
1509 bool aFound = aSelectedResults.find(aResult) != aSelectedResults.end();
1510 if (aSelectedResults.find(aResult) != aSelectedResults.end() &&
1511 theOwnersToSelect.FindIndex(anOwner) <= 0)
1512 theOwnersToSelect.Add(anOwner);
1518 void PartSet_SketcherMgr::connectToPropertyPanel(ModuleBase_ModelWidget* theWidget,
1519 const bool isToConnect)
1522 connect(theWidget, SIGNAL(beforeValuesChanged()),
1523 this, SLOT(onBeforeValuesChangedInPropertyPanel()));
1524 connect(theWidget, SIGNAL(afterValuesChanged()),
1525 this, SLOT(onAfterValuesChangedInPropertyPanel()));
1528 disconnect(theWidget, SIGNAL(beforeValuesChanged()),
1529 this, SLOT(onBeforeValuesChangedInPropertyPanel()));
1530 disconnect(theWidget, SIGNAL(afterValuesChanged()),
1531 this, SLOT(onAfterValuesChangedInPropertyPanel()));
1535 void PartSet_SketcherMgr::widgetStateChanged(int thePreviousState)
1537 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>
1538 (getCurrentOperation());
1540 if (PartSet_SketcherMgr::isSketchOperation(aFOperation) ||
1541 isNestedSketchOperation(aFOperation) &&
1542 thePreviousState == ModuleBase_ModelWidget::ModifiedInPP) {
1543 FeaturePtr aFeature = aFOperation->feature();
1544 visualizeFeature(aFeature, aFOperation->isEditOperation(), canDisplayObject(aFeature));
1549 void PartSet_SketcherMgr::customizePresentation(const ObjectPtr& theObject)
1551 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>
1552 (getCurrentOperation());
1553 if (aFOperation && (PartSet_SketcherMgr::isSketchOperation(aFOperation) ||
1554 isNestedSketchOperation(aFOperation)))
1555 SketcherPrs_Tools::sendExpressionShownEvent(myIsConstraintsShown[PartSet_Tools::Expressions]);
1557 // update entities selection priorities
1558 FeaturePtr aFeature = ModelAPI_Feature::feature(theObject);
1559 if (aFeature.get() && PartSet_SketcherMgr::isEntity(aFeature->getKind())) {
1560 // update priority for feature
1561 updateSelectionPriority(aFeature, aFeature);
1562 // update priority for results of the feature
1563 std::list<ResultPtr> aResults = aFeature->results();
1564 std::list<ResultPtr>::const_iterator anIt = aResults.begin(), aLastIt = aResults.end();
1565 for (; anIt != aLastIt; anIt++)
1566 updateSelectionPriority(*anIt, aFeature);
1570 ModuleBase_Operation* PartSet_SketcherMgr::getCurrentOperation() const
1572 return myModule->workshop()->currentOperation();
1575 //**************************************************************
1576 ModuleBase_ModelWidget* PartSet_SketcherMgr::getActiveWidget() const
1578 ModuleBase_ModelWidget* aWidget = 0;
1579 ModuleBase_Operation* anOperation = getCurrentOperation();
1581 ModuleBase_IPropertyPanel* aPanel = anOperation->propertyPanel();
1583 aWidget = aPanel->activeWidget();
1588 void PartSet_SketcherMgr::visualizeFeature(const FeaturePtr& theFeature,
1589 const bool isEditOperation,
1590 const bool isToDisplay,
1591 const bool isFlushRedisplay)
1593 #ifdef DEBUG_DO_NOT_BY_ENTER
1597 if (isEditOperation || !theFeature.get())
1600 ModuleBase_IWorkshop* aWorkshop = myModule->workshop();
1601 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(aWorkshop);
1603 // 1. change visibility of the object itself, here the presentable object is processed,
1604 // e.g. constraints features
1605 //FeaturePtr aFeature = aFOperation->feature();
1606 std::list<ResultPtr> aResults = theFeature->results();
1608 theFeature->setDisplayed(true);
1610 theFeature->setDisplayed(false);
1612 // change visibility of the object results, e.g. non-constraint features
1613 std::list<ResultPtr>::const_iterator aIt;
1614 for (aIt = aResults.begin(); aIt != aResults.end(); ++aIt) {
1616 (*aIt)->setDisplayed(true);
1619 (*aIt)->setDisplayed(false);
1622 if (isFlushRedisplay)
1623 Events_Loop::loop()->flush(Events_Loop::eventByName(EVENT_OBJECT_TO_REDISPLAY));
1626 void PartSet_SketcherMgr::storeSelection(const bool theHighlightedOnly)
1628 if (!myCurrentSketch.get())
1631 ModuleBase_IWorkshop* aWorkshop = myModule->workshop();
1632 ModuleBase_ISelection* aSelect = aWorkshop->selection();
1633 QList<ModuleBase_ViewerPrsPtr> aStoredPrs = aSelect->getHighlighted();
1635 QList<FeaturePtr> aFeatureList;
1636 if (!theHighlightedOnly) {
1637 QList<ModuleBase_ViewerPrsPtr> aSelected = aSelect->getSelected(
1638 ModuleBase_ISelection::AllControls);
1639 aStoredPrs.append(aSelected);
1642 // 1. it is necessary to save current selection in order to restore it after the features moving
1643 myCurrentSelection.clear();
1645 QList<ModuleBase_ViewerPrsPtr>::const_iterator anIt = aStoredPrs.begin(),
1646 aLast = aStoredPrs.end();
1648 CompositeFeaturePtr aSketch = activeSketch();
1649 for (; anIt != aLast; anIt++) {
1650 ModuleBase_ViewerPrsPtr aPrs = *anIt;
1651 ObjectPtr anObject = aPrs->object();
1652 if (!anObject.get())
1655 ResultPtr aResult = std::dynamic_pointer_cast<ModelAPI_Result>(anObject);
1656 FeaturePtr aFeature;
1658 aFeature = ModelAPI_Feature::feature(aResult);
1660 aFeature = std::dynamic_pointer_cast<ModelAPI_Feature>(anObject);
1663 std::set<AttributePtr> aSelectedAttributes;
1664 std::set<ResultPtr> aSelectedResults;
1665 if (myCurrentSelection.find(aFeature) != myCurrentSelection.end()) {
1666 std::pair<std::set<AttributePtr>, std::set<ResultPtr> > aPair =
1667 myCurrentSelection.find(aFeature).value();
1668 aSelectedAttributes = aPair.first;
1669 aSelectedResults = aPair.second;
1672 Handle(SelectMgr_EntityOwner) anOwner = aPrs->owner();
1673 if (aResult.get()) {
1674 getAttributesOrResults(anOwner, aFeature, aSketch, aResult,
1675 aSelectedAttributes, aSelectedResults);
1678 std::list<ResultPtr> aResults = aFeature->results();
1679 std::list<ResultPtr>::const_iterator aIt;
1680 for (aIt = aResults.begin(); aIt != aResults.end(); ++aIt) {
1681 ResultPtr aResult = *aIt;
1682 getAttributesOrResults(anOwner, aFeature, aSketch, aResult,
1683 aSelectedAttributes, aSelectedResults);
1686 myCurrentSelection[aFeature] = std::make_pair(aSelectedAttributes, aSelectedResults);
1688 //qDebug(QString(" storeSelection: %1").arg(myCurrentSelection.size()).toStdString().c_str());
1691 void PartSet_SketcherMgr::restoreSelection()
1693 if (!myCurrentSketch.get())
1696 //qDebug(QString("restoreSelection: %1").arg(myCurrentSelection.size()).toStdString().c_str());
1697 ModuleBase_IWorkshop* aWorkshop = myModule->workshop();
1698 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(aWorkshop);
1699 FeatureToSelectionMap::const_iterator aSIt = myCurrentSelection.begin(),
1700 aSLast = myCurrentSelection.end();
1701 SelectMgr_IndexedMapOfOwner anOwnersToSelect;
1702 for (; aSIt != aSLast; aSIt++) {
1703 anOwnersToSelect.Clear();
1704 getSelectionOwners(aSIt.key(), myCurrentSketch, aWorkshop, myCurrentSelection,
1706 aConnector->workshop()->selector()->setSelectedOwners(anOwnersToSelect, false);
1710 void PartSet_SketcherMgr::onShowConstraintsToggle(int theType, bool theState)
1712 PartSet_Tools::ConstraintVisibleState aType = (PartSet_Tools::ConstraintVisibleState)theType;
1714 updateBySketchParameters(aType, theState);
1717 void PartSet_SketcherMgr::updateBySketchParameters(
1718 const PartSet_Tools::ConstraintVisibleState& theType,
1721 if (myCurrentSketch.get() == NULL)
1724 bool aPrevState = myIsConstraintsShown[theType];
1725 myIsConstraintsShown[theType] = theState;
1728 case PartSet_Tools::Geometrical:
1729 case PartSet_Tools::Dimensional: {
1730 if (aPrevState != theState) {
1731 ModuleBase_IWorkshop* aWorkshop = myModule->workshop();
1732 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(aWorkshop);
1733 for (int i = 0; i < myCurrentSketch->numberOfSubs(); i++) {
1734 FeaturePtr aSubFeature = myCurrentSketch->subFeature(i);
1735 bool aProcessed = false;
1736 bool aConstraintDisplayed = canDisplayConstraint(aSubFeature, theType, aProcessed);
1738 aSubFeature->setDisplayed(aConstraintDisplayed);
1740 Events_Loop::loop()->flush(Events_Loop::eventByName(EVENT_OBJECT_TO_REDISPLAY));
1744 case PartSet_Tools::Expressions: {
1745 if (aPrevState != theState) {
1746 /// call all sketch features redisplay, the expression state will be corrected in customize
1747 /// of distance presentation
1748 Events_ID anEventId = Events_Loop::loop()->eventByName(EVENT_OBJECT_TO_REDISPLAY);
1749 PartSet_Tools::sendSubFeaturesEvent(myCurrentSketch, anEventId);
1756 void PartSet_SketcherMgr::updateSelectionPriority(ObjectPtr theObject,
1757 FeaturePtr theFeature)
1759 if (!theObject.get() || !theFeature.get())
1762 AISObjectPtr anAIS = workshop()->displayer()->getAISObject(theObject);
1763 Handle(AIS_InteractiveObject) anAISIO;
1764 if (anAIS.get() != NULL) {
1765 anAISIO = anAIS->impl<Handle(AIS_InteractiveObject)>();
1768 if (!anAISIO.IsNull()) { // the presentation for the object is visualized
1769 int anAdditionalPriority = 0;
1771 std::shared_ptr<SketchPlugin_Feature> aSPFeature =
1772 std::dynamic_pointer_cast<SketchPlugin_Feature>(theFeature);
1773 if (aSPFeature.get() != NULL) {
1775 // 2. Simple segments
1776 // 3. External objects (violet color)
1777 // 4. Auxiliary segments (dotted)
1778 // StdSelect_BRepSelectionTool::Load uses priority calculating:
1779 // Standard_Integer aPriority =
1780 // (thePriority == -1) ? GetStandardPriority (theShape, theType) : thePriority;
1781 // Priority of Vertex is 8, edge(segment) is 7.
1782 // It might be not corrected as provides the condition above.
1783 bool isExternal = aSPFeature->isExternal();
1784 bool isAuxiliary = PartSet_Tools::isAuxiliarySketchEntity(aSPFeature);
1786 if (!isExternal && !isAuxiliary)
1787 anAdditionalPriority = 30;
1790 anAdditionalPriority = 20;
1791 // auxiliary feature
1793 anAdditionalPriority = 10; /// auxiliary objects should have less priority that
1794 // edges/vertices of local selection on not-sketch objects
1796 Handle(ModuleBase_ResultPrs) aResult = Handle(ModuleBase_ResultPrs)::DownCast(anAISIO);
1797 if (!aResult.IsNull()) {
1798 aResult->setAdditionalSelectionPriority(anAdditionalPriority);
1804 XGUI_Workshop* PartSet_SketcherMgr::workshop() const
1806 ModuleBase_IWorkshop* anIWorkshop = myModule->workshop();
1807 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(anIWorkshop);
1808 return aConnector->workshop();
1811 XGUI_OperationMgr* PartSet_SketcherMgr::operationMgr() const
1813 return workshop()->operationMgr();