1 // Copyright (C) 2014-20xx CEA/DEN, EDF R&D
3 #include "PartSet_Module.h"
4 #include "PartSet_WidgetSketchLabel.h"
5 #include "PartSet_Validators.h"
6 #include "PartSet_Tools.h"
7 #include "PartSet_PreviewPlanes.h"
8 #include "PartSet_WidgetPoint2d.h"
9 #include "PartSet_WidgetPoint2DFlyout.h"
10 #include "PartSet_WidgetShapeSelector.h"
11 #include "PartSet_WidgetMultiSelector.h"
12 #include "PartSet_WidgetSubShapeSelector.h"
13 #include "PartSet_WidgetFeaturePointSelector.h"
14 #include "PartSet_WidgetEditor.h"
15 #include "PartSet_WidgetFileSelector.h"
16 #include "PartSet_WidgetSketchCreator.h"
17 #include "PartSet_SketcherMgr.h"
18 #include "PartSet_SketcherReentrantMgr.h"
19 #include "PartSet_ResultSketchPrs.h"
20 #include "PartSet_MenuMgr.h"
21 #include "PartSet_CustomPrs.h"
22 #include "PartSet_IconFactory.h"
23 #include "PartSet_WidgetChoice.h"
24 #include "PartSet_OverconstraintListener.h"
26 #include "PartSet_Filters.h"
27 #include "PartSet_FilterInfinite.h"
29 #include <PartSetPlugin_Remove.h>
30 #include <PartSetPlugin_Part.h>
31 #include <PartSetPlugin_Duplicate.h>
33 #include <ModuleBase_Operation.h>
34 #include <ModuleBase_OperationAction.h>
35 #include <ModuleBase_IViewer.h>
36 #include <ModuleBase_IViewWindow.h>
37 #include <ModuleBase_IPropertyPanel.h>
38 #include <ModuleBase_WidgetEditor.h>
39 #include <ModuleBase_WidgetValidated.h>
40 #include <ModuleBase_Tools.h>
41 #include <ModuleBase_OperationFeature.h>
42 #include <ModuleBase_WidgetFactory.h>
43 #include <ModuleBase_OperationDescription.h>
44 #include <ModuleBase_ViewerPrs.h>
46 #include <ModelAPI_Object.h>
47 #include <ModelAPI_Events.h>
48 #include <ModelAPI_Validator.h>
49 #include <ModelAPI_Data.h>
50 #include <ModelAPI_Session.h>
51 #include <ModelAPI_ResultBody.h>
52 #include <ModelAPI_AttributeString.h>
53 #include <ModelAPI_AttributeSelectionList.h>
54 #include <ModelAPI_Tools.h>
55 #include <ModelAPI_ResultConstruction.h>
57 #include <GeomDataAPI_Point2D.h>
58 #include <GeomDataAPI_Point.h>
59 #include <GeomDataAPI_Dir.h>
61 #include <XGUI_Displayer.h>
62 #include <XGUI_Workshop.h>
63 #include <XGUI_OperationMgr.h>
64 #include <XGUI_PropertyPanel.h>
65 #include <XGUI_ModuleConnector.h>
66 #include <XGUI_ContextMenuMgr.h>
67 #include <XGUI_Tools.h>
68 #include <XGUI_ObjectsBrowser.h>
69 #include <XGUI_SelectionMgr.h>
70 #include <XGUI_DataModel.h>
71 #include <XGUI_ErrorMgr.h>
72 #include <XGUI_CustomPrs.h>
73 #include <XGUI_SelectionMgr.h>
74 #include <XGUI_ActionsMgr.h>
76 #include <SketchPlugin_Feature.h>
77 #include <SketchPlugin_Sketch.h>
78 #include <SketchPlugin_ConstraintAngle.h>
79 #include <SketchPlugin_ConstraintLength.h>
80 #include <SketchPlugin_ConstraintDistance.h>
81 #include <SketchPlugin_ConstraintParallel.h>
82 #include <SketchPlugin_ConstraintPerpendicular.h>
83 #include <SketchPlugin_ConstraintRadius.h>
85 #include <SketcherPrs_SymbolPrs.h>
86 #include <SketcherPrs_Coincident.h>
87 #include <SketcherPrs_Tools.h>
89 #include <Events_Loop.h>
90 #include <Config_PropManager.h>
91 #include <Config_Keywords.h>
93 #include <AIS_Dimension.hxx>
94 #include <AIS_InteractiveObject.hxx>
95 #include <StdSelect_TypeOfFace.hxx>
96 #include <TopoDS_Vertex.hxx>
98 #include <TopoDS_Shape.hxx>
99 #include <BRep_Tool.hxx>
102 #include <QMouseEvent>
105 #include <QApplication>
106 #include <QMessageBox>
107 #include <QMainWindow>
111 #include <GeomAlgoAPI_FaceBuilder.h>
112 #include <GeomDataAPI_Dir.h>
114 #include <SelectMgr_ListIteratorOfListOfFilter.hxx>
120 /*!Create and return new instance of XGUI_Module*/
121 extern "C" PARTSET_EXPORT ModuleBase_IModule* createModule(ModuleBase_IWorkshop* theWshop)
123 return new PartSet_Module(theWshop);
126 PartSet_Module::PartSet_Module(ModuleBase_IWorkshop* theWshop)
127 : ModuleBase_IModule(theWshop),
129 myIsOperationIsLaunched(false)
131 new PartSet_IconFactory();
133 mySketchMgr = new PartSet_SketcherMgr(this);
134 mySketchReentrantMgr = new PartSet_SketcherReentrantMgr(theWshop);
136 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(theWshop);
137 XGUI_Workshop* aWorkshop = aConnector->workshop();
139 ModuleBase_IViewer* aViewer = theWshop->viewer();
140 connect(aViewer, SIGNAL(keyRelease(ModuleBase_IViewWindow*, QKeyEvent*)),
141 this, SLOT(onKeyRelease(ModuleBase_IViewWindow*, QKeyEvent*)));
142 connect(aViewer, SIGNAL(viewTransformed(int)),
143 SLOT(onViewTransformed(int)));
144 connect(aViewer, SIGNAL(viewCreated(ModuleBase_IViewWindow*)),
145 SLOT(onViewCreated(ModuleBase_IViewWindow*)));
146 myMenuMgr = new PartSet_MenuMgr(this);
147 myCustomPrs = new PartSet_CustomPrs(theWshop);
149 myOverconstraintListener = new PartSet_OverconstraintListener(theWshop);
151 Events_Loop* aLoop = Events_Loop::loop();
152 aLoop->registerListener(this, Events_Loop::eventByName(EVENT_DOCUMENT_CHANGED));
154 mySelectionFilters.Append(new PartSet_GlobalFilter(myWorkshop));
155 mySelectionFilters.Append(new PartSet_FilterInfinite(myWorkshop));
157 setDefaultConstraintShown();
159 Config_PropManager::registerProp("Visualization", "operation_parameter_color",
160 "Reference shape wireframe color in operation", Config_Prop::Color,
161 PartSet_CustomPrs::OPERATION_PARAMETER_COLOR());
162 Config_PropManager::registerProp("Visualization", "operation_result_color",
163 "Result shape wireframe color in operation", Config_Prop::Color,
164 PartSet_CustomPrs::OPERATION_RESULT_COLOR());
165 Config_PropManager::registerProp("Visualization", "operation_highlight_color",
166 "Multi selector item color in operation", Config_Prop::Color,
167 PartSet_CustomPrs::OPERATION_HIGHLIGHT_COLOR());
168 Config_PropManager::registerProp("Visualization", "operation_remove_feature_color",
169 "Color of removed feature in operation", Config_Prop::Color,
170 PartSet_CustomPrs::OPERATION_REMOVE_FEATURE_COLOR());
173 PartSet_Module::~PartSet_Module()
175 SelectMgr_ListIteratorOfListOfFilter aIt(mySelectionFilters);
176 for (; aIt.More(); aIt.Next()) {
177 Handle(SelectMgr_Filter) aFilter = aIt.Value();
178 if (!aFilter.IsNull())
182 delete myOverconstraintListener;
185 void PartSet_Module::activateSelectionFilters()
187 SelectMgr_ListIteratorOfListOfFilter aIt(mySelectionFilters);
188 for (; aIt.More(); aIt.Next()) {
189 Handle(SelectMgr_Filter) aFilter = aIt.Value();
190 if (!aFilter.IsNull())
191 myWorkshop->viewer()->addSelectionFilter(aFilter);
195 void PartSet_Module::deactivateSelectionFilters()
197 SelectMgr_ListIteratorOfListOfFilter aIt(mySelectionFilters);
198 for (; aIt.More(); aIt.Next()) {
199 Handle(SelectMgr_Filter) aFilter = aIt.Value();
200 if (!aFilter.IsNull())
201 myWorkshop->viewer()->removeSelectionFilter(aFilter);
205 void PartSet_Module::storeSelection()
207 sketchMgr()->storeSelection();
210 void PartSet_Module::restoreSelection()
212 sketchMgr()->restoreSelection();
215 void PartSet_Module::registerValidators()
217 //Registering of validators
218 SessionPtr aMgr = ModelAPI_Session::get();
219 ModelAPI_ValidatorsFactory* aFactory = aMgr->validators();
220 aFactory->registerValidator("PartSet_DistanceSelection", new PartSet_DistanceSelection);
221 aFactory->registerValidator("PartSet_LengthSelection", new PartSet_LengthSelection);
222 aFactory->registerValidator("PartSet_PerpendicularSelection", new PartSet_PerpendicularSelection);
223 aFactory->registerValidator("PartSet_ParallelSelection", new PartSet_ParallelSelection);
224 aFactory->registerValidator("PartSet_RadiusSelection", new PartSet_RadiusSelection);
225 aFactory->registerValidator("PartSet_RigidSelection", new PartSet_RigidSelection);
226 aFactory->registerValidator("PartSet_CoincidentSelection", new PartSet_CoincidentSelection);
227 aFactory->registerValidator("PartSet_HVDirSelection", new PartSet_HVDirSelection);
228 aFactory->registerValidator("PartSet_TangentSelection", new PartSet_TangentSelection);
229 aFactory->registerValidator("PartSet_FilletSelection", new PartSet_FilletSelection);
230 aFactory->registerValidator("PartSet_AngleSelection", new PartSet_AngleSelection);
231 aFactory->registerValidator("PartSet_EqualSelection", new PartSet_EqualSelection);
232 aFactory->registerValidator("PartSet_CollinearSelection", new PartSet_CollinearSelection);
233 aFactory->registerValidator("PartSet_MiddlePointSelection", new PartSet_MiddlePointSelection);
234 aFactory->registerValidator("PartSet_DifferentObjects", new PartSet_DifferentObjectsValidator);
235 aFactory->registerValidator("PartSet_CoincidentAttr", new PartSet_CoincidentAttr);
236 aFactory->registerValidator("PartSet_MultyTranslationSelection",
237 new PartSet_MultyTranslationSelection);
238 aFactory->registerValidator("PartSet_SplitSelection", new PartSet_SplitSelection);
239 aFactory->registerValidator("PartSet_ProjectionSelection", new PartSet_ProjectionSelection);
242 void PartSet_Module::connectToPropertyPanel(ModuleBase_ModelWidget* theWidget,
243 const bool isToConnect)
245 mySketchMgr->connectToPropertyPanel(theWidget, isToConnect);
248 void PartSet_Module::operationCommitted(ModuleBase_Operation* theOperation)
250 if (sketchMgr()->isNestedSketchOperation(theOperation)) {
251 mySketchMgr->commitNestedSketch(theOperation);
254 /// Restart sketcher operations automatically
255 if (!mySketchReentrantMgr->operationCommitted(theOperation)) {
257 ModuleBase_OperationFeature* aFOperation =
258 dynamic_cast<ModuleBase_OperationFeature*>(theOperation);
259 if (aFOperation && !aFOperation->isEditOperation()) {
260 // the selection is cleared after commit the create operation
261 // in order to do not use the same selected objects in the restarted operation
262 // for common behaviour, the selection is cleared even if the operation is not restarted
263 getWorkshop()->selector()->clearSelection();
268 void PartSet_Module::operationAborted(ModuleBase_Operation* theOperation)
270 /// Restart sketcher operations automatically
271 mySketchReentrantMgr->operationAborted(theOperation);
274 void PartSet_Module::operationStarted(ModuleBase_Operation* theOperation)
276 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>
279 XGUI_Workshop* aWorkshop = XGUI_Tools::workshop(workshop());
280 XGUI_PropertyPanel* aPropertyPanel = aWorkshop->propertyPanel();
282 ModuleBase_ModelWidget* aFilledWidget = 0;
283 bool aPostonedWidgetActivation = false;
285 FeaturePtr aFeature = aFOperation->feature();
286 /// Restart sketcher operations automatically
287 /// it is important to call method of sketch reentrant manager before filling of PP
288 /// because it fills some created feature attributes, these new values should be used
289 /// to fill the property panel
290 mySketchReentrantMgr->operationStarted(theOperation);
292 aWorkshop->fillPropertyPanel(aFOperation);
293 // filling the operation values by the current selection
294 // if the operation can be committed after the controls filling, the method perform should
295 // be stopped. Otherwise unnecessary presentations can be shown(e.g. operation prs in sketch)
296 bool isOperationCommitted = false;
297 if (!aFOperation->isEditOperation()) {
298 std::string aGreedAttributeId = ModuleBase_Tools::findGreedAttribute(workshop(), aFeature);
299 // if there is a greed attribute, automatic commit by preselection
300 // for this feature is prohibited
301 aFilledWidget = aFOperation->activateByPreselection(aGreedAttributeId);
302 if (currentOperation() != aFOperation)
303 isOperationCommitted = true;
305 if (aGreedAttributeId.empty()) {
306 // a signal should be emitted before the next widget activation
307 // because, the activation of the next widget will give a focus to the widget.
308 // As a result the value of the widget is initialized.
309 // And commit may happens until the value is entered.
311 if (mySketchReentrantMgr->canBeCommittedByPreselection())
312 isOperationCommitted = mySketchMgr->operationActivatedByPreselection();
313 // activate the next obligatory widget
314 if (!isOperationCommitted)
315 aPropertyPanel->activateNextWidget(aFilledWidget);
318 else { // there is a greed widget
319 const QList<ModuleBase_ModelWidget*>& aWidgets = aPropertyPanel->modelWidgets();
320 std::string aFirstAttributeId = aWidgets.front()->attributeID();
321 // activate next widget after greeded if it is the first widget in the panel
322 // else the first panel widget is already activated by operation start
323 if (aFirstAttributeId == aGreedAttributeId)
324 aPostonedWidgetActivation = true;
327 } if (!isOperationCommitted) {
328 aWorkshop->connectToPropertyPanel(true);
329 updateSketcherOnStart(aFOperation);
330 updatePresentationsOnStart(aFOperation);
332 // the objects of the current operation should be deactivated
333 QObjectPtrList anObjects;
334 anObjects.append(aFeature);
335 std::list<ResultPtr> aResults;
336 ModelAPI_Tools::allResults(aFeature, aResults);
337 std::list<ResultPtr>::const_iterator aIt;
338 for (aIt = aResults.begin(); aIt != aResults.end(); ++aIt) {
339 anObjects.append(*aIt);
341 QObjectPtrList::const_iterator anIt = anObjects.begin(), aLast = anObjects.end();
342 for (; anIt != aLast; anIt++)
343 aWorkshop->deactivateActiveObject(*anIt, false);
344 if (anObjects.size() > 0) {
345 XGUI_Displayer* aDisplayer = aWorkshop->displayer();
346 aDisplayer->updateViewer();
348 /// state of command actions should be updated after displayed objects modification because
349 /// deactivation(for example) of objects may influence on selection in the viewer
350 /// State of command actions may depend on selection in the viewer(e.g. Sketch)
351 workshop()->updateCommandStatus();
353 if (aPostonedWidgetActivation) {
354 // if the widget is an empty in the chain of activated widgets, the current operation
355 // is restarted. It should be performed after functionality of the operation starting
356 aPropertyPanel->activateNextWidget(aFilledWidget);
361 void PartSet_Module::updateSketcherOnStart(ModuleBase_Operation* theOperation)
363 if (PartSet_SketcherMgr::isSketchOperation(theOperation)) {
364 mySketchMgr->startSketch(theOperation);
366 else if (sketchMgr()->isNestedSketchOperation(theOperation)) {
367 mySketchMgr->startNestedSketch(theOperation);
371 void PartSet_Module::updatePresentationsOnStart(ModuleBase_Operation* theOperation)
373 ModuleBase_OperationFeature* aFOperation =
374 dynamic_cast<ModuleBase_OperationFeature*>(theOperation);
376 myCustomPrs->activate(aFOperation->feature(), ModuleBase_IModule::CustomizeArguments, true);
377 myCustomPrs->activate(aFOperation->feature(), ModuleBase_IModule::CustomizeResults, true);
381 void PartSet_Module::operationResumed(ModuleBase_Operation* theOperation)
383 ModuleBase_IModule::operationResumed(theOperation);
385 ModuleBase_OperationFeature* aFOperation =
386 dynamic_cast<ModuleBase_OperationFeature*>(theOperation);
388 myCustomPrs->activate(aFOperation->feature(), ModuleBase_IModule::CustomizeArguments, true);
389 myCustomPrs->activate(aFOperation->feature(), ModuleBase_IModule::CustomizeResults, true);
393 void PartSet_Module::operationStopped(ModuleBase_Operation* theOperation)
395 bool isModifiedArgs = myCustomPrs->deactivate(ModuleBase_IModule::CustomizeArguments, false);
396 bool isModifiedResults = myCustomPrs->deactivate(ModuleBase_IModule::CustomizeResults, false);
397 bool isModified = isModifiedArgs || isModifiedResults;
399 if (sketchMgr()->isNestedSketchOperation(theOperation)) {
400 mySketchMgr->stopNestedSketch(theOperation);
402 else if (PartSet_SketcherMgr::isSketchOperation(theOperation))
403 setDefaultConstraintShown();
405 //VSV: Viewer is updated on feature update and redisplay
407 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(myWorkshop);
408 XGUI_Displayer* aDisplayer = aConnector->workshop()->displayer();
409 aDisplayer->updateViewer();
412 QMap<PartSet_Tools::ConstraintVisibleState, bool>::const_iterator
413 anIt = myHasConstraintShown.begin(), aLast = myHasConstraintShown.end();
414 for (; anIt != aLast; anIt++) {
415 mySketchMgr->updateBySketchParameters(anIt.key(), anIt.value());
419 ModuleBase_Operation* PartSet_Module::currentOperation() const
421 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
422 XGUI_OperationMgr* anOpMgr = aConnector->workshop()->operationMgr();
423 return anOpMgr->currentOperation();
426 bool PartSet_Module::canUndo() const
428 bool aCanUndo = false;
429 SessionPtr aMgr = ModelAPI_Session::get();
430 if (aMgr->hasModuleDocument() && aMgr->canUndo()) {
431 aCanUndo = !aMgr->isOperation();
432 if (!aCanUndo) // check the enable state additionally by sketch manager
433 aCanUndo = aMgr->canUndo();
438 bool PartSet_Module::canRedo() const
440 bool aCanRedo = false;
441 SessionPtr aMgr = ModelAPI_Session::get();
442 if (aMgr->hasModuleDocument() && aMgr->canRedo()) {
443 aCanRedo = !aMgr->isOperation();
444 if (!aCanRedo) // check the enable state additionally by sketch manager
445 aCanRedo = aMgr->canRedo();
450 bool PartSet_Module::canApplyAction(const ObjectPtr& theObject, const QString& theActionId) const
453 if (theActionId == "MOVE_CMD") {
454 FeaturePtr aFeature = ModelAPI_Feature::feature(theObject);
456 ResultPtr aResult = ModuleBase_Tools::firstResult(aFeature);
457 // part features can not be moved in the history.
458 if (aResult.get() && aResult->groupName() == ModelAPI_ResultPart::group())
465 bool PartSet_Module::canEraseObject(const ObjectPtr& theObject) const
467 // the sketch manager put the restriction to the objects erase
468 return mySketchMgr->canEraseObject(theObject);
471 bool PartSet_Module::canDisplayObject(const ObjectPtr& theObject) const
473 // the sketch manager put the restriction to the objects display
474 return mySketchMgr->canDisplayObject(theObject);
477 /*void PartSet_Module::processHiddenObject(const std::list<ObjectPtr>& theObjects)
479 mySketchMgr->processHiddenObject(theObjects);
482 bool PartSet_Module::canActivateSelection(const ObjectPtr& theObject) const
484 bool aCanActivate = ModuleBase_IModule::canActivateSelection(theObject);
486 ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
487 bool isSketchOp = PartSet_SketcherMgr::isSketchOperation(anOperation),
488 isNestedOp = sketchMgr()->isNestedSketchOperation(anOperation);
489 if (isSketchOp || isNestedOp) {
490 // in active sketch operation it is possible to activate operation object in selection
491 // in the edit operation, e.g. points of the line can be moved when the line is edited
492 ModuleBase_OperationFeature* aFOperation =
493 dynamic_cast<ModuleBase_OperationFeature*>(anOperation);
494 aCanActivate = aCanActivate || (aFOperation && aFOperation->isEditOperation());
499 bool PartSet_Module::addViewerMenu(const QMap<QString, QAction*>& theStdActions,
501 QMap<int, QAction*>& theMenuActions) const
503 return myMenuMgr->addViewerMenu(theStdActions, theParent, theMenuActions);
506 void PartSet_Module::updateViewerMenu(const QMap<QString, QAction*>& theStdActions)
508 myMenuMgr->updateViewerMenu(theStdActions);
511 bool PartSet_Module::isActionEnableStateFixed(const int theActionId) const
513 bool isEnabledFixed = false;
514 if (theActionId == XGUI_ActionsMgr::AcceptAll &&
515 mySketchReentrantMgr->isInternalEditActive())
516 isEnabledFixed = true;
517 return isEnabledFixed;
520 QString PartSet_Module::getFeatureError(const FeaturePtr& theFeature)
522 QString anError = ModuleBase_IModule::getFeatureError(theFeature);
523 if (anError.isEmpty())
524 anError = sketchMgr()->getFeatureError(theFeature);
529 void PartSet_Module::grantedOperationIds(ModuleBase_Operation* theOperation,
530 QStringList& theIds) const
532 myMenuMgr->grantedOperationIds(theOperation, theIds);
534 if (PartSet_SketcherMgr::isSketchOperation(theOperation)) {
535 XGUI_Workshop* aWorkshop = getWorkshop();
536 theIds.append(aWorkshop->contextMenuMgr()->action("DELETE_CMD")->text());
540 void PartSet_Module::activeSelectionModes(QIntList& theModes)
543 if (mySketchMgr->activeSketch().get())
544 PartSet_SketcherMgr::sketchSelectionModes(theModes);
547 void PartSet_Module::customSubShapesSelectionModes(QIntList& theTypes)
549 if (theTypes.contains(TopAbs_FACE))
550 theTypes.append(SketcherPrs_Tools::Sel_Sketch_Face);
551 if (theTypes.contains(TopAbs_WIRE))
552 theTypes.append(SketcherPrs_Tools::Sel_Sketch_Wire);
555 bool PartSet_Module::isMouseOverWindow()
557 return mySketchMgr->isMouseOverWindow();
560 bool PartSet_Module::isSketchNeutralPointActivated() const
562 bool isNeutralPoint = true;
563 if (sketchReentranceMgr()->isInternalEditActive())
564 isNeutralPoint = false;
565 if (myIsOperationIsLaunched)
566 isNeutralPoint = false;
568 return isNeutralPoint;
571 void PartSet_Module::closeDocument()
573 myActivePartIndex = QModelIndex();
577 void PartSet_Module::clearViewer()
579 myCustomPrs->clearPrs();
581 XGUI_Workshop* aWorkshop = getWorkshop();
582 XGUI_Displayer* aDisplayer = aWorkshop->displayer();
583 aDisplayer->deactivateSelectionFilters();
586 void PartSet_Module::propertyPanelDefined(ModuleBase_Operation* theOperation)
588 ModuleBase_OperationFeature* aFOperation =
589 dynamic_cast<ModuleBase_OperationFeature*>(theOperation);
593 ModuleBase_IPropertyPanel* aPanel = aFOperation->propertyPanel();
594 // we have to manually activate the sketch label in edit mode
595 if (PartSet_SketcherMgr::isSketchOperation(aFOperation) && (aFOperation->isEditOperation()))
596 aPanel->activateWidget(aPanel->modelWidgets().first());
599 bool PartSet_Module::createWidgets(ModuleBase_Operation* theOperation,
600 QList<ModuleBase_ModelWidget*>& theWidgets) const
602 bool aProcessed = false;
604 ModuleBase_OperationFeature* aFOperation =
605 dynamic_cast<ModuleBase_OperationFeature*>(theOperation);
606 XGUI_Workshop* aWorkshop = getWorkshop();
607 XGUI_PropertyPanel* aPropertyPanel = aWorkshop->propertyPanel();
608 if (mySketchMgr->activeSketch().get() && aFOperation && aPropertyPanel) {
609 ModuleBase_ISelection* aSelection = workshop()->selection();
610 // click on a point in sketch leads here with the point is highlighted, not yet selected
611 QList<ModuleBase_ViewerPrsPtr> aPreselection = aSelection->getHighlighted();
612 if (aPreselection.size() == 1) {
613 ModuleBase_ViewerPrsPtr aSelectedPrs = aPreselection[0];
614 ObjectPtr anObject = aSelectedPrs->object();
616 FeaturePtr aFeature = ModelAPI_Feature::feature(anObject);
617 FeaturePtr anOpFeature = aFOperation->feature();
618 GeomShapePtr aShape = aSelectedPrs->shape();
619 // click on the digit of dimension constrain comes here
620 // with an empty shape, so we need the check
621 if (aFeature == anOpFeature && aShape.get() && !aShape->isNull()) {
622 // if feature has only one result and shape of result is equal to selected shape
623 // this attribute is not processed. It is a case of Sketch Point.
624 if (aFeature->results().size() == 1) {
625 ResultPtr aResult = aFeature->results().front();
626 if (aResult.get() && aResult->shape()->isEqual(aShape))
629 const TopoDS_Shape& aTDShape = aShape->impl<TopoDS_Shape>();
630 AttributePtr anAttribute = PartSet_Tools::findAttributeBy2dPoint(anObject, aTDShape,
631 mySketchMgr->activeSketch());
632 if (anAttribute.get()) {
633 QString aXmlRepr = aFOperation->getDescription()->xmlRepresentation();
634 ModuleBase_WidgetFactory aFactory(aXmlRepr.toStdString(), workshop());
636 const std::string anAttributeId = anAttribute->id();
637 aFactory.createWidget(aPropertyPanel->contentWidget(), anAttributeId);
639 theWidgets = aFactory.getModelWidgets();
640 // it is possible that the point does not present in XML definition,
641 // in this case, we assume that it is not processed by this module
642 // e.g. "Intersection point" feature
643 aProcessed = !theWidgets.isEmpty();
651 void PartSet_Module::onSelectionChanged()
653 ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
657 bool isSketcherOp = false;
658 // An edit operation is enable only if the current opeation is the sketch operation
659 if (mySketchMgr->activeSketch()) {
660 if (PartSet_Tools::sketchPlane(mySketchMgr->activeSketch()))
661 isSketcherOp = PartSet_SketcherMgr::isSketchOperation(aOperation);
664 // Editing of constraints can be done on selection
665 ModuleBase_ISelection* aSelect = myWorkshop->selection();
666 QList<ModuleBase_ViewerPrsPtr> aSelected = aSelect->getSelected();
667 if (aSelected.size() == 1) {
668 ModuleBase_ViewerPrsPtr aPrs = aSelected.first();
669 ObjectPtr aObject = aPrs->object();
670 FeaturePtr aFeature = ModelAPI_Feature::feature(aObject);
672 std::string aId = aFeature->getKind();
673 if ((aId == SketchPlugin_ConstraintRadius::ID()) ||
674 (aId == SketchPlugin_ConstraintLength::ID()) ||
675 (aId == SketchPlugin_ConstraintDistance::ID()) ||
676 (aId == SketchPlugin_ConstraintAngle::ID())) {
677 editFeature(aFeature);
684 void PartSet_Module::onKeyRelease(ModuleBase_IViewWindow* theWnd, QKeyEvent* theEvent)
686 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
687 XGUI_OperationMgr* anOpMgr = aConnector->workshop()->operationMgr();
688 anOpMgr->onKeyReleased(theWnd->viewPort(), theEvent);
691 ModuleBase_ModelWidget* PartSet_Module::createWidgetByType(const std::string& theType,
693 Config_WidgetAPI* theWidgetApi)
695 ModuleBase_IWorkshop* aWorkshop = workshop();
696 XGUI_Workshop* aXUIWorkshop = getWorkshop();
697 ModuleBase_ModelWidget* aWgt = NULL;
698 if (theType == "sketch-start-label") {
699 PartSet_WidgetSketchLabel* aLabelWgt = new PartSet_WidgetSketchLabel(theParent, aWorkshop,
700 theWidgetApi, myHasConstraintShown);
701 connect(aLabelWgt, SIGNAL(planeSelected(const std::shared_ptr<GeomAPI_Pln>&)),
702 mySketchMgr, SLOT(onPlaneSelected(const std::shared_ptr<GeomAPI_Pln>&)));
703 connect(aLabelWgt, SIGNAL(showConstraintToggled(int, bool)),
704 mySketchMgr, SLOT(onShowConstraintsToggle(int, bool)));
706 } else if (theType == "sketch-2dpoint_selector") {
707 PartSet_WidgetPoint2D* aPointWgt = new PartSet_WidgetPoint2D(theParent, aWorkshop,
709 aPointWgt->setSketch(mySketchMgr->activeSketch());
710 connect(aPointWgt, SIGNAL(vertexSelected()), sketchReentranceMgr(), SLOT(onVertexSelected()));
712 }else if (theType == "sketch-2dpoint_flyout_selector") {
713 PartSet_WidgetPoint2DFlyout* aPointWgt = new PartSet_WidgetPoint2DFlyout(theParent, aWorkshop,
715 aPointWgt->setSketch(mySketchMgr->activeSketch());
716 connect(aPointWgt, SIGNAL(vertexSelected()), sketchReentranceMgr(), SLOT(onVertexSelected()));
718 } else if (theType == "sketch_shape_selector") {
719 PartSet_WidgetShapeSelector* aShapeSelectorWgt =
720 new PartSet_WidgetShapeSelector(theParent, aWorkshop, theWidgetApi);
721 aShapeSelectorWgt->setSketcher(mySketchMgr->activeSketch());
722 aWgt = aShapeSelectorWgt;
723 } else if (theType == "sketch_multi_selector") {
724 PartSet_WidgetMultiSelector* aShapeSelectorWgt =
725 new PartSet_WidgetMultiSelector(theParent, aWorkshop, theWidgetApi);
726 aShapeSelectorWgt->setSketcher(mySketchMgr->activeSketch());
727 aWgt = aShapeSelectorWgt;
729 else if (theType == "sketch_sub_shape_selector") {
730 PartSet_WidgetSubShapeSelector* aSubShapeSelectorWgt =
731 new PartSet_WidgetSubShapeSelector(theParent, aWorkshop, theWidgetApi);
732 aSubShapeSelectorWgt->setSketcher(mySketchMgr->activeSketch());
733 aWgt = aSubShapeSelectorWgt;
735 else if (theType == "sketch_feature_point_selector") {
736 PartSet_WidgetFeaturePointSelector* aPointSelectorWgt =
737 new PartSet_WidgetFeaturePointSelector(theParent, aWorkshop, theWidgetApi);
738 aPointSelectorWgt->setSketcher(mySketchMgr->activeSketch());
739 aWgt = aPointSelectorWgt;
741 else if (theType == WDG_DOUBLEVALUE_EDITOR) {
742 aWgt = new PartSet_WidgetEditor(theParent, aWorkshop, theWidgetApi);
743 } else if (theType == "export_file_selector") {
744 aWgt = new PartSet_WidgetFileSelector(theParent, aWorkshop, theWidgetApi);
745 } else if (theType == "sketch_launcher") {
746 aWgt = new PartSet_WidgetSketchCreator(theParent, this, theWidgetApi);
747 } else if (theType == "module_choice") {
748 aWgt = new PartSet_WidgetChoice(theParent, theWidgetApi);
749 connect(aWgt, SIGNAL(itemSelected(ModuleBase_ModelWidget*, int)),
750 this, SLOT(onChoiceChanged(ModuleBase_ModelWidget*, int)));
755 ModuleBase_ModelWidget* PartSet_Module::activeWidget() const
757 ModuleBase_ModelWidget* anActiveWidget = 0;
759 anActiveWidget = mySketchReentrantMgr->internalActiveWidget();
760 if (!anActiveWidget) {
761 ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
763 ModuleBase_IPropertyPanel* aPanel = aOperation->propertyPanel();
764 anActiveWidget = aPanel ? aPanel->activeWidget() : 0;
767 return anActiveWidget;
770 bool PartSet_Module::deleteObjects()
772 bool isProcessed = false;
774 XGUI_Workshop* aWorkshop = getWorkshop();
775 XGUI_OperationMgr* anOpMgr = aWorkshop->operationMgr();
777 //SessionPtr aMgr = ModelAPI_Session::get();
778 // 1. check whether the delete should be processed in the module
779 ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
780 bool isSketchOp = PartSet_SketcherMgr::isSketchOperation(anOperation),
781 isNestedOp = sketchMgr()->isNestedSketchOperation(anOperation);
782 if (isSketchOp || isNestedOp) {
784 // 2. find selected presentations
785 // selected objects should be collected before the current operation abort because
786 // the abort leads to selection lost on constraint objects. It can be corrected after #386 issue
787 ModuleBase_ISelection* aSel = workshop()->selection();
788 QObjectPtrList aSelectedObj = aSel->selectedPresentations();
789 // if there are no selected objects in the viewer, that means that the selection in another
790 // place cased this method. It is necessary to return the false value to understande in above
791 // method that delete is not processed
792 if (aSelectedObj.count() == 0)
795 // avoid delete of the objects, which are not belong to the current sketch
796 // in order to do not delete results of other sketches
797 QObjectPtrList aSketchObjects;
798 QObjectPtrList::const_iterator anIt = aSelectedObj.begin(), aLast = aSelectedObj.end();
799 for ( ; anIt != aLast; anIt++) {
800 ObjectPtr anObject = *anIt;
801 if (mySketchMgr->isObjectOfSketch(anObject)) {
802 // sketch feature should be used in this list because workshop deletes features only
803 // results are skipped
804 FeaturePtr aSketchFeature = ModelAPI_Feature::feature(anObject);
805 aSketchObjects.append(aSketchFeature);
808 // if the selection contains only local selected presentations from other sketches,
809 // the Delete operation should not be done at all
810 if (aSketchObjects.size() == 0)
813 // 3. start operation
814 QString aDescription = aWorkshop->contextMenuMgr()->action("DELETE_CMD")->text();
815 ModuleBase_OperationAction* anOpAction = new ModuleBase_OperationAction(aDescription, this);
817 // the active nested sketch operation should be aborted unconditionally
818 // the Delete action should be additionally granted for the Sketch operation
819 // in order to do not abort/commit it
820 if (!anOpMgr->canStartOperation(anOpAction->id()))
821 return true; // the objects are processed but can not be deleted
823 anOpMgr->startOperation(anOpAction);
825 // WORKAROUND, should be done to avoid viewer highlight update after deletetion of objects
826 // the problem is in AIS Dimensions recompute
827 // if a line and the dim are removed, line is the first
828 // it causes the AIS recompute, where the base line is null,
829 // the result is empty AIS in the viewer
830 XGUI_Tools::workshop(myWorkshop)->selector()->clearSelection();
832 // 4. delete features
833 // sketch feature should be skipped, only sub-features can be removed
834 // when sketch operation is active
835 aWorkshop->deleteFeatures(aSketchObjects);
837 anOpMgr->commitOperation();
842 void PartSet_Module::onFeatureTriggered()
844 // is commented for imp: Unpressing the button of the current action must behave like
845 // a validation if the entity can be created (instead of Cancel, as currently)
846 /*QAction* aCmd = dynamic_cast<QAction*>(sender());
847 if (aCmd->isCheckable() && aCmd->isChecked()) {
848 // 1. check whether the delete should be processed in the module
849 ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
850 bool isNestedOp = myModule->sketchMgr()->isNestedCreateOperation(anOperation);
852 // in case if in the viewer nothing is displayed, the create operation should not be
853 // comitted even if all values of the feature are initialized
854 if (!mySketchMgr->canDisplayCurrentCreatedFeature()) {
855 // the action information should be saved before the operation is aborted
856 // because this abort leads to update command status, which unchecks this action
857 anOperation->abort();
858 launchOperation(aCmd->data().toString());
862 ModuleBase_IModule::onFeatureTriggered();
865 void PartSet_Module::editFeature(FeaturePtr theFeature)
867 storeConstraintsState(theFeature->getKind());
868 ModuleBase_IModule::editFeature(theFeature);
871 bool PartSet_Module::canCommitOperation() const
876 void PartSet_Module::launchOperation(const QString& theCmdId)
878 myIsOperationIsLaunched = true;
879 storeConstraintsState(theCmdId.toStdString());
880 updateConstraintsState(theCmdId.toStdString());
882 ModuleBase_IModule::launchOperation(theCmdId);
884 myIsOperationIsLaunched = false;
887 void PartSet_Module::storeConstraintsState(const std::string& theFeatureKind)
889 if (myWorkshop->currentOperation() &&
890 myWorkshop->currentOperation()->id().toStdString() == SketchPlugin_Sketch::ID()) {
891 const QMap<PartSet_Tools::ConstraintVisibleState, bool>& aShownStates =
892 mySketchMgr->showConstraintStates();
893 myHasConstraintShown = aShownStates;
897 void PartSet_Module::updateConstraintsState(const std::string& theFeatureKind)
899 if (PartSet_SketcherMgr::constraintsIdList().contains(theFeatureKind.c_str()) ||
900 PartSet_SketcherMgr::replicationsIdList().contains(theFeatureKind.c_str())) {
901 // Show constraints if a constraint was anOperation
902 mySketchMgr->updateBySketchParameters(PartSet_Tools::Geometrical, true);
903 mySketchMgr->updateBySketchParameters(PartSet_Tools::Dimensional, true);
904 mySketchMgr->updateBySketchParameters(PartSet_Tools::Expressions,
905 myHasConstraintShown[PartSet_Tools::Expressions]);
909 void PartSet_Module::onObjectDisplayed(ObjectPtr theObject, AISObjectPtr theAIS)
911 Handle(AIS_InteractiveObject) anAIS = theAIS->impl<Handle(AIS_InteractiveObject)>();
912 if (!anAIS.IsNull()) {
913 Handle(AIS_InteractiveContext) aCtx = anAIS->GetContext();
914 Handle(AIS_Dimension) aDim = Handle(AIS_Dimension)::DownCast(anAIS);
915 if (!aDim.IsNull()) {
916 aCtx->SetZLayer(aDim, myVisualLayerId);
918 Handle(SketcherPrs_SymbolPrs) aCons = Handle(SketcherPrs_SymbolPrs)::DownCast(anAIS);
920 aCtx->SetZLayer(aCons, myVisualLayerId);
925 void PartSet_Module::onBeforeObjectErase(ObjectPtr theObject, AISObjectPtr theAIS)
928 // it should be recomputed in order to disappear in the viewer if the corresponded object
930 //if (myCustomPrs->isActive())
931 // myCustomPrs->redisplay(theObject, false);
934 void PartSet_Module::onViewTransformed(int theTrsfType)
936 // Set length of arrows constant in pixel size
937 // if the operation is panning or rotate or panglobal then do nothing
938 if ((theTrsfType == 1) || (theTrsfType == 3) || (theTrsfType == 4))
940 ModuleBase_IViewer* aViewer = myWorkshop->viewer();
941 Handle(AIS_InteractiveContext) aContext = aViewer->AISContext();
942 if (aContext.IsNull())
945 //Handle(V3d_View) aView = aViewer->activeView();
947 XGUI_Workshop* aWorkshop = getWorkshop();
948 XGUI_Displayer* aDisplayer = aWorkshop->displayer();
949 Handle(V3d_Viewer) aV3dViewer = aContext->CurrentViewer();
950 Handle(V3d_View) aView;
952 for (aV3dViewer->InitDefinedViews();
953 aV3dViewer->MoreDefinedViews();
954 aV3dViewer->NextDefinedViews()) {
955 Handle(V3d_View) aV = aV3dViewer->DefinedView();
956 double aS = aV->Scale();
964 double aLen = aView->Convert(SketcherPrs_Tools::getDefaultArrowSize());
966 double aPrevLen = SketcherPrs_Tools::getArrowSize();
967 SketcherPrs_Tools::setArrowSize(aLen);
968 const double aPrevScale = aViewer->Scale(aViewer->activeView());
969 const double aCurScale = aViewer->activeView()->Camera()->Scale();
970 aViewer->SetScale(aViewer->activeView(), aCurScale);
971 SketcherPrs_Tools::setTextHeight (aCurScale / aPrevScale * SketcherPrs_Tools::getTextHeight());
972 bool isModified = false;
973 QList<AISObjectPtr> aPrsList = aDisplayer->displayedPresentations();
974 foreach (AISObjectPtr aAIS, aPrsList) {
975 Handle(AIS_InteractiveObject) aAisObj = aAIS->impl<Handle(AIS_InteractiveObject)>();
977 Handle(AIS_Dimension) aDim = Handle(AIS_Dimension)::DownCast(aAisObj);
978 if (!aDim.IsNull()) {
979 aDim->DimensionAspect()->ArrowAspect()->SetLength(aLen);
980 aContext->Redisplay(aDim, false);
985 aDisplayer->updateViewer();
988 bool PartSet_Module::isCustomPrsActivated(const ModuleBase_CustomizeFlag& theFlag) const
990 return myCustomPrs->isActive(theFlag);
993 void PartSet_Module::activateCustomPrs(const FeaturePtr& theFeature,
994 const ModuleBase_CustomizeFlag& theFlag,
995 const bool theUpdateViewer)
997 myCustomPrs->activate(theFeature, theFlag, theUpdateViewer);
1000 void PartSet_Module::deactivateCustomPrs(const ModuleBase_CustomizeFlag& theFlag,
1001 const bool theUpdateViewer)
1003 myCustomPrs->deactivate(theFlag, theUpdateViewer);
1006 bool PartSet_Module::customisePresentation(ResultPtr theResult, AISObjectPtr thePrs,
1007 std::shared_ptr<GeomAPI_ICustomPrs> theCustomPrs)
1009 bool aCustomized = false;
1011 XGUI_Workshop* aWorkshop = getWorkshop();
1012 XGUI_Displayer* aDisplayer = aWorkshop->displayer();
1013 ObjectPtr anObject = aDisplayer->getObject(thePrs);
1017 std::vector<int> aColor;
1018 //bool aCustomColor = myOverconstraintListener->hasCustomColor(anObject, aColor);
1020 if (!theResult.get()) {
1021 /*// customize sketch symbol presentation
1023 Handle(AIS_InteractiveObject) anAISIO = thePrs->impl<Handle(AIS_InteractiveObject)>();
1024 if (!anAISIO.IsNull()) {
1025 if (!Handle(SketcherPrs_SymbolPrs)::DownCast(anAISIO).IsNull()) {
1026 Handle(SketcherPrs_SymbolPrs) aPrs = Handle(SketcherPrs_SymbolPrs)::DownCast(anAISIO);
1027 if (!aPrs.IsNull()) {
1028 aPrs->SetCustomColor(aColor);
1031 } else if (!Handle(SketcherPrs_Coincident)::DownCast(anAISIO).IsNull()) {
1032 Handle(SketcherPrs_Coincident) aPrs = Handle(SketcherPrs_Coincident)::DownCast(anAISIO);
1033 if (!aPrs.IsNull()) {
1034 aPrs->SetCustomColor(aColor);
1040 // customize sketch dimension constraint presentation
1041 //if (!aCustomized) {
1042 // if (!aCustomColor)
1043 XGUI_CustomPrs::getDefaultColor(anObject, true, aColor);
1044 if (!aColor.empty()) {
1045 aCustomized = thePrs->setColor(aColor[0], aColor[1], aColor[2]);
1049 // customize dimentional constrains
1050 sketchMgr()->customizePresentation(anObject);
1055 bool PartSet_Module::afterCustomisePresentation(std::shared_ptr<ModelAPI_Result> theResult,
1056 AISObjectPtr thePrs,
1057 GeomCustomPrsPtr theCustomPrs)
1059 bool aCustomized = false;
1061 XGUI_Workshop* aWorkshop = getWorkshop();
1062 XGUI_Displayer* aDisplayer = aWorkshop->displayer();
1063 ObjectPtr anObject = aDisplayer->getObject(thePrs);
1067 std::vector<int> aColor;
1068 bool aCustomColorChanged = myOverconstraintListener->isNeedUpdateCustomColor();
1069 if (aCustomColorChanged) {
1070 bool aUseCustomColor = true;
1071 // do not use fully constrained color if create operation is started
1072 /*if (aWorkshop->operationMgr()->hasOperation()) {
1073 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>
1074 (aWorkshop->operationMgr()->currentOperation());
1075 if (aFOperation && !aFOperation->isEditOperation())
1076 aUseCustomColor = false;
1078 if (aUseCustomColor)
1079 myOverconstraintListener->getCustomColor(anObject, aColor);
1080 //if (!theResult.get()) {
1081 // customize sketch symbol presentation
1082 //if (thePrs.get()) {
1083 Handle(AIS_InteractiveObject) anAISIO = thePrs->impl<Handle(AIS_InteractiveObject)>();
1084 if (!anAISIO.IsNull()) {
1085 if (!Handle(SketcherPrs_SymbolPrs)::DownCast(anAISIO).IsNull()) {
1086 Handle(SketcherPrs_SymbolPrs) aPrs = Handle(SketcherPrs_SymbolPrs)::DownCast(anAISIO);
1087 if (!aPrs.IsNull()) {
1088 aPrs->SetCustomColor(aColor);
1091 } else if (!Handle(SketcherPrs_Coincident)::DownCast(anAISIO).IsNull()) {
1092 Handle(SketcherPrs_Coincident) aPrs = Handle(SketcherPrs_Coincident)::DownCast(anAISIO);
1093 if (!aPrs.IsNull()) {
1094 aPrs->SetCustomColor(aColor);
1100 // customize sketch dimension constraint presentation
1102 //if (!aCustomColor)
1103 // XGUI_CustomPrs::getDefaultColor(anObject, true, aColor);
1104 if (!aColor.empty()) { // otherwise presentation has the default color
1105 aCustomized = thePrs->setColor(aColor[0], aColor[1], aColor[2]);
1112 bool PartSet_Module::customizeObject(ObjectPtr theObject, const ModuleBase_CustomizeFlag& theFlag,
1113 const bool theUpdateViewer)
1115 bool isRedisplayed = false;
1116 if (myCustomPrs->isActive(theFlag))
1117 isRedisplayed = myCustomPrs->redisplay(theObject, theFlag, theUpdateViewer);
1119 return isRedisplayed;
1122 void PartSet_Module::customizeObjectBrowser(QWidget* theObjectBrowser)
1124 XGUI_ObjectsBrowser* aOB = dynamic_cast<XGUI_ObjectsBrowser*>(theObjectBrowser);
1126 QLabel* aLabel = aOB->activeDocLabel();
1127 aLabel->installEventFilter(myMenuMgr);
1128 connect(aLabel, SIGNAL(customContextMenuRequested(const QPoint&)),
1129 SLOT(onActiveDocPopup(const QPoint&)));
1130 aOB->treeView()->setExpandsOnDoubleClick(false);
1131 connect(aOB->treeView(), SIGNAL(doubleClicked(const QModelIndex&)),
1132 SLOT(onTreeViewDoubleClick(const QModelIndex&)));
1134 Events_Loop* aLoop = Events_Loop::loop();
1135 aLoop->registerListener(this, Events_Loop::eventByName(EVENT_OBJECT_CREATED));
1139 void PartSet_Module::onActiveDocPopup(const QPoint& thePnt)
1141 SessionPtr aMgr = ModelAPI_Session::get();
1142 QAction* aActivatePartAction = myMenuMgr->action("ACTIVATE_PARTSET_CMD");
1144 XGUI_Workshop* aWorkshop = getWorkshop();
1145 QLabel* aHeader = aWorkshop->objectBrowser()->activeDocLabel();
1147 aActivatePartAction->setEnabled((aMgr->activeDocument() != aMgr->moduleDocument()));
1150 aMenu.addAction(aActivatePartAction);
1151 aMenu.exec(aHeader->mapToGlobal(thePnt));
1154 Handle(AIS_InteractiveObject) PartSet_Module::createPresentation(const ResultPtr& theResult)
1156 return mySketchMgr->createPresentation(theResult);
1160 ObjectPtr PartSet_Module::findPresentedObject(const AISObjectPtr& theAIS) const
1163 ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
1165 /// If last line finished on vertex the lines creation sequence has to be break
1166 ModuleBase_IPropertyPanel* aPanel = aOperation->propertyPanel();
1168 ModuleBase_ModelWidget* anActiveWidget = aPanel->activeWidget();
1169 // if there is an active widget, find the presented object in it
1170 if (!anActiveWidget)
1171 anActiveWidget = aPanel->preselectionWidget();
1173 ModuleBase_WidgetValidated* aWidgetValidated = dynamic_cast<ModuleBase_WidgetValidated*>
1175 if (aWidgetValidated)
1176 anObject = aWidgetValidated->findPresentedObject(theAIS);
1182 bool PartSet_Module::canBeShaded(Handle(AIS_InteractiveObject) theAIS) const
1184 bool aCanBeShaged = true;
1186 Handle(PartSet_ResultSketchPrs) aPrs = Handle(PartSet_ResultSketchPrs)::DownCast(theAIS);
1188 aCanBeShaged = false;
1190 return aCanBeShaged;
1193 void PartSet_Module::addObjectBrowserMenu(QMenu* theMenu) const
1195 QObjectPtrList aObjects = myWorkshop->selection()->selectedObjects();
1196 int aSelected = aObjects.size();
1197 SessionPtr aMgr = ModelAPI_Session::get();
1198 QAction* aActivatePartAction = myMenuMgr->action("ACTIVATE_PART_CMD");
1200 bool hasResult = false;
1201 bool hasFeature = false;
1202 bool hasParameter = false;
1203 bool hasCompositeOwner = false;
1204 ModuleBase_Tools::checkObjects(aObjects, hasResult, hasFeature, hasParameter,
1207 ModuleBase_Operation* aCurrentOp = myWorkshop->currentOperation();
1208 if (aSelected == 1) {
1209 ObjectPtr aObject = aObjects.first();
1211 ResultPartPtr aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aObject);
1212 FeaturePtr aFeature = std::dynamic_pointer_cast<ModelAPI_Feature>(aObject);
1213 bool isPart = aPart.get() ||
1214 (aFeature.get() && (aFeature->getKind() == PartSetPlugin_Part::ID()));
1216 DocumentPtr aPartDoc;
1218 aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aFeature->firstResult());
1220 if (aPart.get()) // this may be null is Part feature is disabled
1221 aPartDoc = aPart->partDoc();
1223 theMenu->addAction(aActivatePartAction);
1224 aActivatePartAction->setEnabled((aMgr->activeDocument() != aPartDoc));
1226 } else if (aObject->document() == aMgr->activeDocument()) {
1227 if (hasParameter || hasFeature) {
1228 myMenuMgr->action("EDIT_CMD")->setEnabled(true);
1229 theMenu->addAction(myMenuMgr->action("EDIT_CMD"));
1230 if (aCurrentOp && aFeature.get()) {
1231 if (aCurrentOp->id().toStdString() == aFeature->getKind())
1232 myMenuMgr->action("EDIT_CMD")->setEnabled(false);
1239 myMenuMgr->action("EDIT_CMD")->setEnabled(aCurrentOp == 0);
1240 theMenu->addAction(myMenuMgr->action("EDIT_CMD"));
1241 theMenu->addSeparator();
1244 bool aNotDeactivate = (aCurrentOp == 0);
1245 if (!aNotDeactivate) {
1246 aActivatePartAction->setEnabled(false);
1250 #define EXPAND_PARENT(OBJ) \
1251 QModelIndex aObjIndex = aDataModel->objectIndex(OBJ); \
1252 if (aObjIndex.isValid()) { \
1253 QModelIndex aParent = aObjIndex.parent(); \
1254 int aCount = aDataModel->rowCount(aParent); \
1256 aTreeView->setExpanded(aParent, true); \
1260 void PartSet_Module::processEvent(const std::shared_ptr<Events_Message>& theMessage)
1262 if (theMessage->eventID() == Events_Loop::loop()->eventByName(EVENT_DOCUMENT_CHANGED)) {
1263 // Do not change activation of parts if an operation active
1264 static QStringList aAllowActivationList;
1265 if (aAllowActivationList.isEmpty())
1266 aAllowActivationList <<
1267 QString(PartSetPlugin_Part::ID().c_str()) <<
1268 QString(PartSetPlugin_Duplicate::ID().c_str()) <<
1269 QString(PartSetPlugin_Remove::ID().c_str());
1270 if (myWorkshop->currentOperation() &&
1271 (!aAllowActivationList.contains(myWorkshop->currentOperation()->id())))
1273 XGUI_Workshop* aWorkshop = getWorkshop();
1274 XGUI_DataTree* aTreeView = aWorkshop->objectBrowser()->treeView();
1275 QLabel* aLabel = aWorkshop->objectBrowser()->activeDocLabel();
1276 QPalette aPalet = aLabel->palette();
1278 SessionPtr aMgr = ModelAPI_Session::get();
1279 DocumentPtr aActiveDoc = aMgr->activeDocument();
1280 if (myActivePartIndex.isValid())
1281 aTreeView->setExpanded(myActivePartIndex, false);
1282 XGUI_DataModel* aDataModel = aWorkshop->objectBrowser()->dataModel();
1283 myActivePartIndex = aDataModel->documentRootIndex(aActiveDoc);
1284 if (myActivePartIndex.isValid())
1285 aTreeView->setExpanded(myActivePartIndex, true);
1287 aLabel->setPalette(aPalet);
1288 aWorkshop->updateCommandStatus();
1290 // Update displayed objects in order to update active color
1291 XGUI_Displayer* aDisplayer = aWorkshop->displayer();
1292 QObjectPtrList aObjects = aDisplayer->displayedObjects();
1294 foreach(ObjectPtr aObj, aObjects) {
1295 aHidden = !aObj->data() || !aObj->data()->isValid() ||
1296 aObj->isDisabled() || (!aObj->isDisplayed());
1298 aDisplayer->redisplay(aObj, false);
1300 aDisplayer->updateViewer();
1301 } else if (theMessage->eventID() == Events_Loop::loop()->eventByName(EVENT_OBJECT_CREATED)) {
1302 std::shared_ptr<ModelAPI_ObjectUpdatedMessage> aUpdMsg =
1303 std::dynamic_pointer_cast<ModelAPI_ObjectUpdatedMessage>(theMessage);
1304 std::set<ObjectPtr> aObjects = aUpdMsg->objects();
1306 ObjectPtr aConstrObj;
1307 ObjectPtr aResultObj;
1308 std::set<ObjectPtr>::const_iterator aIt;
1309 DocumentPtr aRootDoc = ModelAPI_Session::get()->moduleDocument();
1310 for (aIt = aObjects.begin(); aIt != aObjects.end(); ++aIt) {
1311 ObjectPtr aObject = (*aIt);
1312 if ((!aResultObj.get()) && (aObject->groupName() == ModelAPI_ResultBody::group())
1313 && (aObject->document() != aRootDoc))
1314 aResultObj = aObject;
1315 if ((!aConstrObj.get()) && (aObject->groupName() == ModelAPI_ResultConstruction::group())
1316 && (aObject->document() != aRootDoc))
1317 aConstrObj = aObject;
1318 if (aResultObj.get() && aConstrObj.get())
1322 if (aResultObj.get() || aConstrObj.get()) {
1323 XGUI_Workshop* aWorkshop = getWorkshop();
1324 XGUI_DataTree* aTreeView = aWorkshop->objectBrowser()->treeView();
1325 XGUI_DataModel* aDataModel = aWorkshop->objectBrowser()->dataModel();
1327 if (aResultObj.get()) {
1328 EXPAND_PARENT(aResultObj)
1330 if (aConstrObj.get()) {
1331 EXPAND_PARENT(aConstrObj)
1337 void PartSet_Module::onTreeViewDoubleClick(const QModelIndex& theIndex)
1339 if (myWorkshop->currentOperation()) // Do not change activation of parts if an operation active
1341 SessionPtr aMgr = ModelAPI_Session::get();
1342 if (!theIndex.isValid()) {
1343 // It seems that this code is obsolete
1344 //aMgr->setActiveDocument(aMgr->moduleDocument());
1347 if (theIndex.column() != 0) // Use only first column
1350 XGUI_Workshop* aWorkshop = getWorkshop();
1351 XGUI_DataModel* aDataModel = aWorkshop->objectBrowser()->dataModel();
1352 // De not use non editable Indexes
1353 if ((aDataModel->flags(theIndex) & Qt::ItemIsSelectable) == 0)
1355 ObjectPtr aObj = aDataModel->object(theIndex);
1357 ResultPartPtr aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aObj);
1358 if (!aPart.get()) { // Probably this is Feature
1359 FeaturePtr aPartFeature = std::dynamic_pointer_cast<ModelAPI_Feature>(aObj);
1360 if (aPartFeature.get() && (aPartFeature->getKind() == PartSetPlugin_Part::ID())) {
1361 aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aPartFeature->firstResult());
1364 if (aPart.get()) { // if this is a part
1365 if (aPart->partDoc() == aMgr->activeDocument()) {
1366 myMenuMgr->activatePartSet();
1368 myMenuMgr->activatePart(aPart);
1374 void PartSet_Module::onViewCreated(ModuleBase_IViewWindow*)
1376 // z layer is created for all started operations in order to visualize operation AIS presentation
1378 Handle(AIS_InteractiveContext) aContext = myWorkshop->viewer()->AISContext();
1379 if (aContext.IsNull())
1382 Handle(V3d_Viewer) aViewer = aContext->CurrentViewer();
1383 if (myVisualLayerId == 0) {
1384 if (myVisualLayerId == 0)
1385 aViewer->AddZLayer(myVisualLayerId);
1387 TColStd_SequenceOfInteger aZList;
1388 aViewer->GetAllZLayers(aZList);
1389 bool aFound = false;
1390 for (int i = 1; i <= aZList.Length(); i++) {
1391 if (aZList(i) == myVisualLayerId) {
1397 aViewer->AddZLayer(myVisualLayerId);
1399 // if there is an active operation with validated widget,
1400 // the filters of this widget should be activated in the created view
1401 ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
1403 ModuleBase_ModelWidget* anActiveWidget = activeWidget();
1404 if (anActiveWidget) {
1405 ModuleBase_WidgetSelector* aWSelector =
1406 dynamic_cast<ModuleBase_WidgetSelector*>(anActiveWidget);
1408 aWSelector->activateSelectionAndFilters(true);
1413 //******************************************************
1414 void PartSet_Module::widgetStateChanged(int thePreviousState)
1416 mySketchMgr->widgetStateChanged(thePreviousState);
1419 bool PartSet_Module::processEnter(const std::string& thePreviousAttributeID)
1421 return mySketchReentrantMgr->processEnter(thePreviousAttributeID);
1424 //******************************************************
1425 void PartSet_Module::beforeOperationStopped(ModuleBase_Operation* theOperation)
1427 if (PartSet_SketcherMgr::isSketchOperation(theOperation)) {
1428 mySketchMgr->stopSketch(theOperation);
1432 //******************************************************
1433 GeomShapePtr PartSet_Module::findShape(const AttributePtr& theAttribute)
1435 GeomShapePtr aGeomShape;
1437 ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
1438 if (anOperation && sketchMgr()->isNestedSketchOperation(anOperation)) {
1439 aGeomShape = PartSet_Tools::findShapeBy2DPoint(theAttribute, myWorkshop);
1444 //******************************************************
1445 AttributePtr PartSet_Module::findAttribute(const ObjectPtr& theObject,
1446 const GeomShapePtr& theGeomShape)
1448 AttributePtr anAttribute;
1449 GeomShapePtr aGeomShape = theGeomShape;
1450 if (!aGeomShape.get()) {
1451 // processing shape of result, e.g. sketch circle center is selected, this is a result
1452 // the geom shape is empty, the shape of result should be used
1453 ResultPtr aResult = std::dynamic_pointer_cast<ModelAPI_Result>(theObject);
1454 if (aResult.get()) {
1455 aGeomShape = aResult->shape();
1459 if (aGeomShape.get()) {
1460 TopoDS_Shape aTDSShape = aGeomShape->impl<TopoDS_Shape>();
1461 return PartSet_Tools::findAttributeBy2dPoint(theObject, aTDSShape,
1462 mySketchMgr->activeSketch());
1467 //******************************************************
1468 void PartSet_Module::onChoiceChanged(ModuleBase_ModelWidget* theWidget,
1471 PartSet_WidgetChoice* aChoiceWidget = dynamic_cast<PartSet_WidgetChoice*>(theWidget);
1475 QString aChoiceTitle = aChoiceWidget->getPropertyPanelTitle(theIndex);
1476 if (!aChoiceTitle.isEmpty()) {
1477 ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
1480 ModuleBase_IPropertyPanel* aPanel = aOperation->propertyPanel();
1482 aPanel->setWindowTitle(aChoiceTitle);
1486 //******************************************************
1487 XGUI_Workshop* PartSet_Module::getWorkshop() const
1489 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
1490 return aConnector->workshop();
1493 //******************************************************
1494 void PartSet_Module::setDefaultConstraintShown()
1496 myHasConstraintShown[PartSet_Tools::Geometrical] = true;
1497 myHasConstraintShown[PartSet_Tools::Dimensional] = true;
1498 myHasConstraintShown[PartSet_Tools::Expressions] = false;