src/PartSet/PartSet_Module.cpp

   1 // Copyright (C) 2014-2020  CEA/DEN, EDF R&D
   2 //
   3 // This library is free software; you can redistribute it and/or
   4 // modify it under the terms of the GNU Lesser General Public
   5 // License as published by the Free Software Foundation; either
   6 // version 2.1 of the License, or (at your option) any later version.
   7 //
   8 // This library is distributed in the hope that it will be useful,
   9 // but WITHOUT ANY WARRANTY; without even the implied warranty of
  10 // MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  11 // Lesser General Public License for more details.
  12 //
  13 // You should have received a copy of the GNU Lesser General Public
  14 // License along with this library; if not, write to the Free Software
  15 // Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
  16 //
  17 // See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
  18 //
  19
  20 #include "PartSet_Module.h"
  21 #include "PartSet_WidgetSketchLabel.h"
  22 #include "PartSet_Validators.h"
  23 #include "PartSet_Tools.h"
  24 #include "PartSet_PreviewPlanes.h"
  25 #include "PartSet_WidgetBSplinePoints.h"
  26 #include "PartSet_WidgetPoint2d.h"
  27 #include "PartSet_WidgetPoint2DFlyout.h"
  28 #include "PartSet_WidgetShapeSelector.h"
  29 #include "PartSet_WidgetMultiSelector.h"
  30 #include "PartSet_WidgetFeaturePointSelector.h"
  31 #include "PartSet_WidgetEditor.h"
  32 #include "PartSet_WidgetFileSelector.h"
  33 #include "PartSet_WidgetSketchCreator.h"
  34 #include "PartSet_SketcherMgr.h"
  35 #include "PartSet_SketcherReentrantMgr.h"
  36 #include "PartSet_ResultSketchPrs.h"
  37 #include "PartSet_MenuMgr.h"
  38 #include "PartSet_CustomPrs.h"
  39 #include "PartSet_IconFactory.h"
  40 #include "PartSet_OverconstraintListener.h"
  41 #include "PartSet_TreeNodes.h"
  42 #include "PartSet_FieldStepPrs.h"
  43 #include "PartSet_BSplineWidget.h"
  44
  45 #include "PartSet_Filters.h"
  46 #include "PartSet_FilterInfinite.h"
  47
  48 #ifdef _DEBUG
  49 #include <QDebug>
  50 #endif
  51
  52 #include <PartSetPlugin_Remove.h>
  53 #include <PartSetPlugin_Part.h>
  54 #include <PartSetPlugin_Duplicate.h>
  55
  56 #include <SketchPlugin_ConstraintCoincidence.h>
  57
  58 #include <ModuleBase_Operation.h>
  59 #include <ModuleBase_IViewer.h>
  60 #include <ModuleBase_IViewWindow.h>
  61 #include <ModuleBase_IPropertyPanel.h>
  62 #include <ModuleBase_ISelectionActivate.h>
  63 #include <ModuleBase_WidgetChoice.h>
  64 #include <ModuleBase_WidgetEditor.h>
  65 #include <ModuleBase_WidgetValidated.h>
  66 #include <ModuleBase_Tools.h>
  67 #include <ModuleBase_OperationFeature.h>
  68 #include <ModuleBase_WidgetFactory.h>
  69 #include <ModuleBase_OperationDescription.h>
  70 #include <ModuleBase_ViewerPrs.h>
  71 #include <ModuleBase_ResultPrs.h>
  72
  73 #include <ModelAPI_ResultField.h>
  74 #include <ModelAPI_Object.h>
  75 #include <ModelAPI_Events.h>
  76 #include <ModelAPI_Validator.h>
  77 #include <ModelAPI_Data.h>
  78 #include <ModelAPI_Session.h>
  79 #include <ModelAPI_ResultBody.h>
  80 #include <ModelAPI_AttributeString.h>
  81 #include <ModelAPI_AttributeSelectionList.h>
  82 #include <ModelAPI_Tools.h>
  83 #include <ModelAPI_ResultConstruction.h>
  84 #include <ModelAPI_AttributeIntArray.h>
  85 #include <ModelAPI_ResultGroup.h>
  86
  87 #include <GeomDataAPI_Point2D.h>
  88 #include <GeomDataAPI_Point.h>
  89 #include <GeomDataAPI_Dir.h>
  90
  91 #include <XGUI_ActiveControlMgr.h>
  92 #include <XGUI_ActiveControlSelector.h>
  93 #include <XGUI_ActionsMgr.h>
  94 #include <XGUI_ContextMenuMgr.h>
  95 #include <XGUI_DataModel.h>
  96 #include <XGUI_Displayer.h>
  97 #include <XGUI_ErrorMgr.h>
  98 #include <XGUI_FacesPanelSelector.h>
  99 #include <XGUI_ModuleConnector.h>
 100 #include <XGUI_ObjectsBrowser.h>
 101 #include <XGUI_OperationMgr.h>
 102 #include <XGUI_PropertyPanel.h>
 103 #include <XGUI_SelectionMgr.h>
 104 #include <XGUI_Tools.h>
 105 #include <XGUI_Workshop.h>
 106
 107 #include <SketchPlugin_ConstraintAngle.h>
 108 #include <SketchPlugin_ConstraintLength.h>
 109 #include <SketchPlugin_ConstraintDistance.h>
 110 #include <SketchPlugin_ConstraintParallel.h>
 111 #include <SketchPlugin_ConstraintPerpendicular.h>
 112 #include <SketchPlugin_ConstraintRadius.h>
 113 #include <SketchPlugin_Feature.h>
 114 #include <SketchPlugin_Projection.h>
 115 #include <SketchPlugin_Sketch.h>
 116
 117 #include <SketcherPrs_SymbolPrs.h>
 118 #include <SketcherPrs_PositionMgr.h>
 119 #include <SketcherPrs_Coincident.h>
 120 #include <SketcherPrs_Tools.h>
 121
 122 #include <Events_Loop.h>
 123 #include <Config_PropManager.h>
 124 #include <Config_Keywords.h>
 125
 126 #include <AIS_Dimension.hxx>
 127 #include <AIS_InteractiveObject.hxx>
 128 #include <StdSelect_TypeOfFace.hxx>
 129 #include <TopoDS_Vertex.hxx>
 130 #include <TopoDS.hxx>
 131 #include <TopoDS_Shape.hxx>
 132 #include <BRep_Tool.hxx>
 133
 134 #include <QObject>
 135 #include <QMouseEvent>
 136 #include <QString>
 137 #include <QTimer>
 138 #include <QApplication>
 139 #include <QMessageBox>
 140 #include <QMainWindow>
 141 #include <QLineEdit>
 142 #include <QString>
 143
 144 #include <GeomAlgoAPI_FaceBuilder.h>
 145 #include <GeomDataAPI_Dir.h>
 146
 147 #include <SelectMgr_ListIteratorOfListOfFilter.hxx>
 148
 149 #define FEATURE_ITEM_COLOR "0,0,225"
 150
 151
 152 /*!Create and return new instance of XGUI_Module*/
 153 extern "C" PARTSET_EXPORT ModuleBase_IModule* createModule(ModuleBase_IWorkshop* theWshop)
 154 {
 155   return new PartSet_Module(theWshop);
 156 }
 157
 158 //******************************************************
 159 PartSet_Module::PartSet_Module(ModuleBase_IWorkshop* theWshop)
 160 : ModuleBase_IModule(theWshop),
 161   myIsOperationIsLaunched(false),
 162   myVisualLayerId(0),
 163   myRoot(0)
 164 {
 165   new PartSet_IconFactory(this);
 166
 167   mySketchMgr = new PartSet_SketcherMgr(this);
 168   mySketchReentrantMgr = new PartSet_SketcherReentrantMgr(theWshop);
 169
 170   ModuleBase_IViewer* aViewer = theWshop->viewer();
 171   connect(aViewer, SIGNAL(keyRelease(ModuleBase_IViewWindow*, QKeyEvent*)),
 172           this, SLOT(onKeyRelease(ModuleBase_IViewWindow*, QKeyEvent*)));
 173   connect(aViewer, SIGNAL(viewTransformed(int)),
 174           SLOT(onViewTransformed(int)));
 175   connect(aViewer, SIGNAL(viewCreated(ModuleBase_IViewWindow*)),
 176           SLOT(onViewCreated(ModuleBase_IViewWindow*)));
 177   myMenuMgr = new PartSet_MenuMgr(this);
 178   myCustomPrs = new PartSet_CustomPrs(theWshop);
 179
 180   myOverconstraintListener = new PartSet_OverconstraintListener(theWshop);
 181
 182   Events_Loop* aLoop = Events_Loop::loop();
 183   aLoop->registerListener(this, Events_Loop::eventByName(EVENT_DOCUMENT_CHANGED));
 184   aLoop->registerListener(this, Events_Loop::eventByName(EVENT_OBJECT_TO_REDISPLAY));
 185
 186   registerSelectionFilter(SF_GlobalFilter, new PartSet_GlobalFilter(myWorkshop));
 187   registerSelectionFilter(SF_FilterInfinite, new PartSet_FilterInfinite(myWorkshop));
 188   Handle(PartSet_ResultGroupNameFilter) aCRFilter = new PartSet_ResultGroupNameFilter(myWorkshop);
 189   std::set<std::string> aCRGroupNames;
 190   aCRGroupNames.insert(ModelAPI_ResultConstruction::group());
 191   aCRFilter->setGroupNames(aCRGroupNames);
 192   registerSelectionFilter(SF_ResultGroupNameFilter, aCRFilter);
 193
 194   setDefaultConstraintShown();
 195
 196   //Config_PropManager::registerProp("Visualization", "object_default_color", "Object color",
 197   //                                 Config_Prop::Color, "225,225,225");
 198
 199   Config_PropManager::registerProp("Visualization", "result_body_color", "Result color",
 200     Config_Prop::Color, ModelAPI_ResultBody::DEFAULT_COLOR());
 201
 202   Config_PropManager::registerProp("Visualization", "result_group_color", "Group color",
 203     Config_Prop::Color, ModelAPI_ResultGroup::DEFAULT_COLOR());
 204
 205   Config_PropManager::registerProp("Visualization", "result_construction_color",
 206     "Construction color",
 207     Config_Prop::Color,
 208     ModelAPI_ResultConstruction::DEFAULT_COLOR());
 209
 210   Config_PropManager::registerProp("Visualization", "result_part_color", "Part color",
 211     Config_Prop::Color, ModelAPI_ResultPart::DEFAULT_COLOR());
 212
 213   Config_PropManager::registerProp("Visualization", "result_field_color", "Field color",
 214     Config_Prop::Color, ModelAPI_ResultField::DEFAULT_COLOR());
 215
 216   Config_PropManager::registerProp("Visualization", "operation_parameter_color",
 217                           "Reference shape wireframe color in operation", Config_Prop::Color,
 218                           PartSet_CustomPrs::OPERATION_PARAMETER_COLOR());
 219   Config_PropManager::registerProp("Visualization", "operation_result_color",
 220                           "Result shape wireframe color in operation", Config_Prop::Color,
 221                           PartSet_CustomPrs::OPERATION_RESULT_COLOR());
 222   Config_PropManager::registerProp("Visualization", "operation_highlight_color",
 223                           "Multi selector item color in operation", Config_Prop::Color,
 224                           PartSet_CustomPrs::OPERATION_HIGHLIGHT_COLOR());
 225   Config_PropManager::registerProp("Visualization", "operation_remove_feature_color",
 226                           "Color of removed feature in operation", Config_Prop::Color,
 227                           PartSet_CustomPrs::OPERATION_REMOVE_FEATURE_COLOR());
 228   Config_PropManager::registerProp("Visualization", "sketch_preview_plane",
 229                           "Color of sketch plane", Config_Prop::Color,
 230                           PartSet_CustomPrs::OPERATION_SKETCH_PLANE());
 231
 232   Config_PropManager::registerProp("Visualization", "hidden_face_transparency",
 233                                    "Hidden faces transparency",
 234                                    Config_Prop::DblSpin,
 235                                    "0.8");
 236
 237   std::ostringstream aStream;
 238   aStream << SketcherPrs_Tools::getDefaultArrowSize();
 239   Config_PropManager::registerProp("Visualization", "dimension_arrow_size",
 240     "Dimension arrow size", Config_Prop::IntSpin, aStream.str());
 241
 242   Config_PropManager::registerProp("Visualization", "dimension_font", "Dimension font",
 243     Config_Prop::String, "Times-bold");
 244
 245   aStream.str("");
 246   aStream.clear();
 247   aStream << SketcherPrs_Tools::getDefaultTextHeight();
 248   Config_PropManager::registerProp("Visualization", "dimension_value_size",
 249     "Dimension value size", Config_Prop::IntSpin, aStream.str());
 250
 251   Config_PropManager::registerProp("Visualization", "sketch_dimension_color",
 252     "Dimension color",
 253     Config_Prop::Color, SKETCH_DIMENSION_COLOR);
 254
 255   Config_PropManager::registerProp("Visualization", "feature_objectbrowser_color",
 256     "Feature items in Object Browser",
 257     Config_Prop::Color, FEATURE_ITEM_COLOR);
 258
 259   Config_PropManager::registerProp("Visualization", "zoom_trihedron_arrows",
 260     "Keep trihedron arrows view size constant", Config_Prop::Boolean, "false");
 261
 262   Config_PropManager::registerProp("Visualization", "axis_arrow_size",
 263     "Trihedron arrows constant size", Config_Prop::IntSpin, "10");
 264
 265   Config_PropManager::registerProp("Shortcuts", "add_parameter_shortcut",
 266     "Add parameter in parameters manager dialog",
 267     Config_Prop::Shortcut, "Ctrl+A");
 268
 269   Config_PropManager::registerProp("Windows", "use_hide_faces_panel",
 270     "Use HideFaces panel in operations", Config_Prop::Boolean, "false");
 271 }
 272
 273 //******************************************************
 274 PartSet_Module::~PartSet_Module()
 275 {
 276   delete myCustomPrs;
 277   delete myOverconstraintListener;
 278   delete myRoot;
 279 }
 280
 281 //******************************************************
 282 void PartSet_Module::createFeatures()
 283 {
 284   ModuleBase_IModule::createFeatures();
 285   myRoot = new PartSet_RootNode();
 286   myRoot->setWorkshop(workshop());
 287 }
 288
 289
 290 //******************************************************
 291 void PartSet_Module::storeSelection()
 292 {
 293   // cash is used only to restore selection, so it should be filled in storeSelection and
 294   // after applying immediatelly cleared in restoreSelection
 295   myCurrentSelection.clear();
 296   sketchMgr()->storeSelection(PartSet_SketcherMgr::ST_SelectType, myCurrentSelection);
 297 }
 298
 299 //******************************************************
 300 void PartSet_Module::restoreSelection()
 301 {
 302   // cash is used only to restore selection, so it should be filled in storeSelection and
 303   // after applying immediatelly cleared in restoreSelection
 304   sketchMgr()->restoreSelection(myCurrentSelection);
 305   myCurrentSelection.clear();
 306 }
 307
 308 //******************************************************
 309 void PartSet_Module::registerValidators()
 310 {
 311   //Registering of validators
 312   SessionPtr aMgr = ModelAPI_Session::get();
 313   ModelAPI_ValidatorsFactory* aFactory = aMgr->validators();
 314   aFactory->registerValidator("PartSet_DistanceSelection", new PartSet_DistanceSelection);
 315   aFactory->registerValidator("PartSet_LengthSelection", new PartSet_LengthSelection);
 316   aFactory->registerValidator("PartSet_PerpendicularSelection", new PartSet_PerpendicularSelection);
 317   aFactory->registerValidator("PartSet_ParallelSelection", new PartSet_ParallelSelection);
 318   aFactory->registerValidator("PartSet_RadiusSelection", new PartSet_RadiusSelection);
 319   aFactory->registerValidator("PartSet_RigidSelection", new PartSet_RigidSelection);
 320   aFactory->registerValidator("PartSet_CoincidentSelection", new PartSet_CoincidentSelection);
 321   aFactory->registerValidator("PartSet_HVDirSelection", new PartSet_HVDirSelection);
 322   aFactory->registerValidator("PartSet_TangentSelection", new PartSet_TangentSelection);
 323   aFactory->registerValidator("PartSet_FilletSelection", new PartSet_FilletSelection);
 324   aFactory->registerValidator("PartSet_AngleSelection", new PartSet_AngleSelection);
 325   aFactory->registerValidator("PartSet_EqualSelection", new PartSet_EqualSelection);
 326   aFactory->registerValidator("PartSet_CollinearSelection", new PartSet_CollinearSelection);
 327   aFactory->registerValidator("PartSet_MiddlePointSelection", new PartSet_MiddlePointSelection);
 328   aFactory->registerValidator("PartSet_DifferentObjects", new PartSet_DifferentObjectsValidator);
 329   aFactory->registerValidator("PartSet_DifferentPoints", new PartSet_DifferentPointsValidator);
 330   aFactory->registerValidator("PartSet_CoincidentAttr", new PartSet_CoincidentAttr);
 331   aFactory->registerValidator("PartSet_MultyTranslationSelection",
 332     new PartSet_MultyTranslationSelection);
 333   aFactory->registerValidator("PartSet_SplitSelection", new PartSet_SplitSelection);
 334   aFactory->registerValidator("PartSet_ProjectionSelection", new PartSet_ProjectionSelection);
 335   aFactory->registerValidator("PartSet_IntersectionSelection", new PartSet_IntersectionSelection);
 336 }
 337
 338 //******************************************************
 339 void PartSet_Module::connectToPropertyPanel(ModuleBase_ModelWidget* theWidget,
 340                                             const bool isToConnect)
 341 {
 342   mySketchMgr->connectToPropertyPanel(theWidget, isToConnect);
 343 }
 344
 345 //******************************************************
 346 void PartSet_Module::operationCommitted(ModuleBase_Operation* theOperation)
 347 {
 348   if (sketchMgr()->isNestedSketchOperation(theOperation)) {
 349     mySketchMgr->commitNestedSketch(theOperation);
 350   }
 351   /// deactivate of overconstraint listener should be performed after Sketch commit (#2176)
 352   if (PartSet_SketcherMgr::isSketchOperation(theOperation))
 353     overconstraintListener()->setActive(false);
 354
 355   /// Restart sketcher operations automatically
 356   if (!mySketchReentrantMgr->operationCommitted(theOperation)) {
 357     getWorkshop()->selector()->clearSelection();
 358   }
 359 }
 360
 361 //******************************************************
 362 void PartSet_Module::operationAborted(ModuleBase_Operation* theOperation)
 363 {
 364   /// Restart sketcher operations automatically
 365   mySketchReentrantMgr->operationAborted(theOperation);
 366   /// deactivate of overconstraint listener should be performed after Sketch abort (#2176)
 367   if (PartSet_SketcherMgr::isSketchOperation(theOperation))
 368     overconstraintListener()->setActive(false);
 369
 370   getWorkshop()->selector()->clearSelection();
 371 }
 372
 373 //******************************************************
 374 void PartSet_Module::operationStarted(ModuleBase_Operation* theOperation)
 375 {
 376   ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>
 377                                                                                 (theOperation);
 378   if (aFOperation) {
 379     XGUI_Workshop* aWorkshop = XGUI_Tools::workshop(workshop());
 380     XGUI_PropertyPanel* aPropertyPanel = aWorkshop->propertyPanel();
 381
 382     ModuleBase_ModelWidget* aFilledWidget = 0;
 383     bool aPostonedWidgetActivation = false;
 384
 385     FeaturePtr aFeature = aFOperation->feature();
 386     /// Restart sketcher operations automatically
 387     /// it is important to call method of sketch reentrant manager before filling of PP
 388     /// because it fills some created feature attributes, these new values should be used
 389     /// to fill the property panel
 390     mySketchReentrantMgr->operationStarted(theOperation);
 391
 392     aWorkshop->fillPropertyPanel(aFOperation);
 393     // filling the operation values by the current selection
 394     // if the operation can be committed after the controls filling, the method perform should
 395     // be stopped. Otherwise unnecessary presentations can be shown(e.g. operation prs in sketch)
 396     bool isOperationCommitted = false;
 397     if (!aFOperation->isEditOperation()) {
 398       std::string aGreedAttributeId = ModuleBase_Tools::findGreedAttribute(workshop(), aFeature);
 399       // if there is a greed attribute, automatic commit by preselection
 400       // for this feature is prohibited
 401       aFilledWidget = aFOperation->activateByPreselection(aGreedAttributeId);
 402       if (currentOperation() != aFOperation)
 403         isOperationCommitted = true;
 404       else {
 405         if (aGreedAttributeId.empty()) {
 406           // a signal should be emitted before the next widget activation
 407           // because, the activation of the next widget will give a focus to the widget.
 408           // As a result the value of the widget is initialized.
 409           // And commit may happens until the value is entered.
 410           if (aFilledWidget) {
 411             if (mySketchReentrantMgr->canBeCommittedByPreselection())
 412               isOperationCommitted = mySketchMgr->operationActivatedByPreselection();
 413             // activate the next obligatory widget
 414             if (!isOperationCommitted)
 415               aPropertyPanel->activateNextWidget(aFilledWidget);
 416           }
 417         }
 418         else { // there is a greed widget
 419           const QList<ModuleBase_ModelWidget*>& aWidgets = aPropertyPanel->modelWidgets();
 420           std::string aFirstAttributeId = aWidgets.front()->attributeID();
 421           // activate next widget after greeded if it is the first widget in the panel
 422           // else the first panel widget is already activated by operation start
 423           if (aFirstAttributeId == aGreedAttributeId)
 424             aPostonedWidgetActivation = true;
 425         }
 426       }
 427     } if (!isOperationCommitted) {
 428       aWorkshop->connectToPropertyPanel(true);
 429       updateSketcherOnStart(aFOperation);
 430       updatePresentationsOnStart(aFOperation);
 431
 432       // the objects of the current operation should be deactivated
 433       QObjectPtrList anObjects;
 434       anObjects.append(aFeature);
 435       std::list<ResultPtr> aResults;
 436       ModelAPI_Tools::allResults(aFeature, aResults);
 437       std::list<ResultPtr>::const_iterator aIt;
 438       for (aIt = aResults.begin(); aIt != aResults.end(); ++aIt) {
 439         anObjects.append(*aIt);
 440       }
 441       QObjectPtrList::const_iterator anIt = anObjects.begin(), aLast = anObjects.end();
 442       for (; anIt != aLast; anIt++)
 443         aWorkshop->deactivateActiveObject(*anIt, false);
 444       if (anObjects.size() > 0) {
 445         XGUI_Displayer* aDisplayer = aWorkshop->displayer();
 446         aDisplayer->updateViewer();
 447       }
 448       /// state of command actions should be updated after displayed objects modification because
 449       /// deactivation(for example) of objects may influence on selection in the viewer
 450       /// State of command actions may depend on selection in the viewer(e.g. Sketch)
 451       workshop()->updateCommandStatus();
 452     }
 453     if (aPostonedWidgetActivation) {
 454       // if the widget is an empty in the chain of activated widgets, the current operation
 455       // is restarted. It should be performed after functionality of the operation starting
 456       aPropertyPanel->activateNextWidget(aFilledWidget);
 457     }
 458   }
 459 }
 460
 461 //******************************************************
 462 void PartSet_Module::updateSketcherOnStart(ModuleBase_Operation* theOperation)
 463 {
 464   if (PartSet_SketcherMgr::isSketchOperation(theOperation)) {
 465     mySketchMgr->startSketch(theOperation);
 466   }
 467   // It is switched off because of
 468   // Task #3067: 5.2.2 Drawing in the sketcher: change the mouse cursor arrow
 469   else if (sketchMgr()->isNestedSketchOperation(theOperation)) {
 470     mySketchMgr->startNestedSketch(theOperation);
 471   }
 472 }
 473
 474 //******************************************************
 475 void PartSet_Module::updatePresentationsOnStart(ModuleBase_Operation* theOperation)
 476 {
 477   ModuleBase_OperationFeature* aFOperation =
 478     dynamic_cast<ModuleBase_OperationFeature*>(theOperation);
 479   if (aFOperation) {
 480     myCustomPrs->activate(aFOperation->feature(), ModuleBase_IModule::CustomizeArguments, false);
 481     myCustomPrs->activate(aFOperation->feature(), ModuleBase_IModule::CustomizeResults, false);
 482   }
 483 }
 484
 485 //******************************************************
 486 void PartSet_Module::operationResumed(ModuleBase_Operation* theOperation)
 487 {
 488   ModuleBase_IModule::operationResumed(theOperation);
 489
 490   ModuleBase_OperationFeature* aFOperation =
 491     dynamic_cast<ModuleBase_OperationFeature*>(theOperation);
 492   if (aFOperation) {
 493     myCustomPrs->activate(aFOperation->feature(), ModuleBase_IModule::CustomizeArguments, false);
 494     myCustomPrs->activate(aFOperation->feature(), ModuleBase_IModule::CustomizeResults, false);
 495   }
 496 }
 497
 498 //******************************************************
 499 void PartSet_Module::operationStopped(ModuleBase_Operation* theOperation)
 500 {
 501   bool isModifiedArgs = myCustomPrs->deactivate(ModuleBase_IModule::CustomizeArguments, false);
 502   bool isModifiedResults = myCustomPrs->deactivate(ModuleBase_IModule::CustomizeResults, false);
 503   bool isModified = isModifiedArgs || isModifiedResults;
 504
 505   if (sketchMgr()->isNestedSketchOperation(theOperation)) {
 506     mySketchMgr->stopNestedSketch(theOperation);
 507   }
 508   else if (PartSet_SketcherMgr::isSketchOperation(theOperation))
 509     setDefaultConstraintShown();
 510
 511   //VSV: Viewer is updated on feature update and redisplay
 512   if (isModified) {
 513     XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(myWorkshop);
 514     XGUI_Displayer* aDisplayer = aConnector->workshop()->displayer();
 515     aDisplayer->updateViewer();
 516   }
 517
 518   QMap<PartSet_Tools::ConstraintVisibleState, bool>::const_iterator
 519     anIt = myHasConstraintShown.begin(), aLast = myHasConstraintShown.end();
 520   for (; anIt != aLast; anIt++) {
 521     mySketchMgr->updateBySketchParameters(anIt.key(), anIt.value());
 522   }
 523 }
 524
 525 //******************************************************
 526 ModuleBase_Operation* PartSet_Module::currentOperation() const
 527 {
 528   XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
 529   XGUI_OperationMgr* anOpMgr = aConnector->workshop()->operationMgr();
 530   return anOpMgr->currentOperation();
 531 }
 532
 533 //******************************************************
 534 bool PartSet_Module::canUndo() const
 535 {
 536   bool aCanUndo = false;
 537   SessionPtr aMgr = ModelAPI_Session::get();
 538   if (aMgr->hasModuleDocument() && aMgr->canUndo()) {
 539     aCanUndo = !aMgr->isOperation();
 540     if (!aCanUndo) // check the enable state additionally by sketch manager
 541       aCanUndo = aMgr->canUndo();
 542   }
 543   return aCanUndo;
 544 }
 545
 546 //******************************************************
 547 bool PartSet_Module::canRedo() const
 548 {
 549   bool aCanRedo = false;
 550   SessionPtr aMgr = ModelAPI_Session::get();
 551   if (aMgr->hasModuleDocument() && aMgr->canRedo()) {
 552     aCanRedo = !aMgr->isOperation();
 553     if (!aCanRedo) // check the enable state additionally by sketch manager
 554       aCanRedo = aMgr->canRedo();
 555   }
 556   return aCanRedo;
 557 }
 558
 559 //******************************************************
 560 bool PartSet_Module::canApplyAction(const ObjectPtr& theObject, const QString& theActionId) const
 561 {
 562   bool aValid = true;
 563   if (theActionId == "MOVE_CMD" || theActionId == "MOVE_SPLIT_CMD") {
 564     FeaturePtr aFeature = ModelAPI_Feature::feature(theObject);
 565     if (aFeature) {
 566       ResultPtr aResult = ModuleBase_Tools::firstResult(aFeature);
 567       // part features can not be moved in the history.
 568       if (aResult.get() && aResult->groupName() == ModelAPI_ResultPart::group())
 569         aValid = false;
 570     }
 571   }
 572   return aValid;
 573 }
 574
 575 //******************************************************
 576 bool PartSet_Module::canEraseObject(const ObjectPtr& theObject) const
 577 {
 578   // the sketch manager put the restriction to the objects erase
 579   return mySketchMgr->canEraseObject(theObject);
 580 }
 581
 582 //******************************************************
 583 bool PartSet_Module::canDisplayObject(const ObjectPtr& theObject) const
 584 {
 585   // the sketch manager put the restriction to the objects display
 586   return mySketchMgr->canDisplayObject(theObject);
 587 }
 588
 589 //******************************************************
 590 bool PartSet_Module::canUsePreselection(const QString& thePreviousOperationKind,
 591                                         const QString& theStartedOperationKind)
 592 {
 593   if (ModuleBase_IModule::canUsePreselection(thePreviousOperationKind, theStartedOperationKind))
 594     return true;
 595
 596   return mySketchMgr->isNestedSketchFeature(theStartedOperationKind);
 597 }
 598
 599 /*void PartSet_Module::processHiddenObject(const std::list<ObjectPtr>& theObjects)
 600 {
 601   mySketchMgr->processHiddenObject(theObjects);
 602 }*/
 603
 604 //******************************************************
 605 bool PartSet_Module::canActivateSelection(const ObjectPtr& theObject) const
 606 {
 607   bool aCanActivate = ModuleBase_IModule::canActivateSelection(theObject);
 608
 609   ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
 610   bool isSketchOp = PartSet_SketcherMgr::isSketchOperation(anOperation),
 611        isNestedOp = sketchMgr()->isNestedSketchOperation(anOperation);
 612   if (isSketchOp || isNestedOp) {
 613     // in active sketch operation it is possible to activate operation object in selection
 614     // in the edit operation, e.g. points of the line can be moved when the line is edited
 615     ModuleBase_OperationFeature* aFOperation =
 616       dynamic_cast<ModuleBase_OperationFeature*>(anOperation);
 617     aCanActivate = aCanActivate || (aFOperation && aFOperation->isEditOperation());
 618   }
 619   return aCanActivate;
 620 }
 621
 622 //******************************************************
 623 bool PartSet_Module::addViewerMenu(const QMap<QString, QAction*>& theStdActions,
 624                                    QWidget* theParent,
 625                                    QMap<int, QAction*>& theMenuActions) const
 626 {
 627   return myMenuMgr->addViewerMenu(theStdActions, theParent, theMenuActions);
 628 }
 629
 630 //******************************************************
 631 void PartSet_Module::updateViewerMenu(const QMap<QString, QAction*>& theStdActions)
 632 {
 633   myMenuMgr->updateViewerMenu(theStdActions);
 634 }
 635
 636 //******************************************************
 637 bool PartSet_Module::isActionEnableStateFixed(const int theActionId) const
 638 {
 639   bool isEnabledFixed = false;
 640   if (theActionId == XGUI_ActionsMgr::AcceptAll &&
 641       mySketchReentrantMgr->isInternalEditActive())
 642     isEnabledFixed = true;
 643   return isEnabledFixed;
 644 }
 645
 646 //******************************************************
 647 QString PartSet_Module::getFeatureError(const FeaturePtr& theFeature)
 648 {
 649   QString anError = ModuleBase_IModule::getFeatureError(theFeature);
 650   if (anError.isEmpty())
 651     anError = sketchMgr()->getFeatureError(theFeature);
 652
 653   return anError;
 654 }
 655
 656 //******************************************************
 657 void PartSet_Module::grantedOperationIds(ModuleBase_Operation* theOperation,
 658                                          QStringList& theIds) const
 659 {
 660   myMenuMgr->grantedOperationIds(theOperation, theIds);
 661
 662   if (PartSet_SketcherMgr::isSketchOperation(theOperation)) {
 663     XGUI_Workshop* aWorkshop = getWorkshop();
 664     theIds.append(aWorkshop->contextMenuMgr()->action("DELETE_CMD")->text());
 665   }
 666 }
 667
 668 //******************************************************
 669 void PartSet_Module::activeSelectionModes(QIntList& theModes)
 670 {
 671   if (mySketchMgr->activeSketch().get())
 672     PartSet_SketcherMgr::sketchSelectionModes(mySketchMgr->activeSketch(), theModes);
 673   else
 674     theModes = XGUI_Tools::workshop(myWorkshop)->viewerSelectionModes();
 675 }
 676
 677 //******************************************************
 678 void PartSet_Module::moduleSelectionModes(int theModesType, QIntList& theModes)
 679 {
 680   customSubShapesSelectionModes(theModes);
 681   //theModes.append(XGUI_Tools::workshop(myWorkshop)->viewerSelectionModes());
 682   //myWorkshop->module()->activeSelectionModes(theModes);
 683 }
 684
 685 //******************************************************
 686 void PartSet_Module::moduleSelectionFilters(const QIntList& theFilterTypes,
 687                                             SelectMgr_ListOfFilter& theSelectionFilters)
 688 {
 689   bool isSketchActive = mySketchMgr->activeSketch().get();
 690
 691   std::map<ModuleBase_SelectionFilterType, Handle(SelectMgr_Filter)>::const_iterator aFiltersIt =
 692     mySelectionFilters.begin();
 693   for (; aFiltersIt != mySelectionFilters.end(); aFiltersIt++) {
 694     int aFilterType = aFiltersIt->first;
 695     // do not add not participating filters in given parameters
 696     if (!theFilterTypes.contains(aFilterType))
 697       continue;
 698
 699     // using sketch filters only if sketch operation is active
 700     if (!isSketchActive &&
 701         mySketchMgr->sketchSelectionFilter((ModuleBase_SelectionFilterType)aFilterType))
 702       continue;
 703
 704     // using filtering of construction results only from faces panel
 705     if (aFilterType == SF_ResultGroupNameFilter)
 706       continue;
 707
 708     theSelectionFilters.Append(aFiltersIt->second);
 709   }
 710 }
 711
 712 //******************************************************
 713 void PartSet_Module::customSubShapesSelectionModes(QIntList& theModes)
 714 {
 715   if (theModes.contains(TopAbs_FACE))
 716     theModes.append(SketcherPrs_Tools::Sel_Sketch_Face);
 717   if (theModes.contains(TopAbs_WIRE))
 718     theModes.append(SketcherPrs_Tools::Sel_Sketch_Wire);
 719
 720   if (mySketchMgr->activeSketch().get())
 721     PartSet_SketcherMgr::sketchSelectionModes(mySketchMgr->activeSketch(), theModes);
 722 }
 723
 724 //******************************************************
 725 void PartSet_Module::getGeomSelection(const std::shared_ptr<ModuleBase_ViewerPrs>& theSelected,
 726                                       ObjectPtr& theObject, AttributePtr& theAttribute)
 727 {
 728   ObjectPtr anObject = theSelected->object();
 729   GeomShapePtr aShape = theSelected->shape();
 730
 731   theAttribute = findAttribute(anObject, aShape);
 732   // TODO: try to create result if object is an external object
 733   theObject = anObject;
 734 }
 735
 736 //******************************************************
 737 bool PartSet_Module::isMouseOverWindow()
 738 {
 739   return mySketchMgr->isMouseOverWindow();
 740 }
 741
 742 //******************************************************
 743 bool PartSet_Module::isSketchNeutralPointActivated() const
 744 {
 745   bool isNeutralPoint = true;
 746   if (sketchReentranceMgr()->isInternalEditActive())
 747     isNeutralPoint = false;
 748   if (myIsOperationIsLaunched)
 749     isNeutralPoint = false;
 750
 751   return isNeutralPoint;
 752 }
 753
 754 //******************************************************
 755 void PartSet_Module::closeDocument()
 756 {
 757   myActivePartIndex = QModelIndex();
 758   SketcherPrs_PositionMgr::get()->clearAll();
 759 }
 760
 761 //******************************************************
 762 void PartSet_Module::clearViewer()
 763 {
 764   myCustomPrs->clearPrs();
 765
 766   XGUI_Workshop* aWorkshop = getWorkshop();
 767   XGUI_Displayer* aDisplayer = aWorkshop->displayer();
 768   aDisplayer->deactivateSelectionFilters(false);
 769 }
 770
 771 //******************************************************
 772 void PartSet_Module::propertyPanelDefined(ModuleBase_Operation* theOperation)
 773 {
 774   ModuleBase_OperationFeature* aFOperation =
 775     dynamic_cast<ModuleBase_OperationFeature*>(theOperation);
 776   if (!aFOperation)
 777     return;
 778
 779   ModuleBase_IPropertyPanel* aPanel = aFOperation->propertyPanel();
 780   // we have to manually activate the sketch label in edit mode
 781   if (PartSet_SketcherMgr::isSketchOperation(aFOperation) &&  (aFOperation->isEditOperation()))
 782     aPanel->activateWidget(aPanel->modelWidgets().first());
 783 }
 784
 785 //******************************************************
 786 bool PartSet_Module::createWidgets(const FeaturePtr& theFeature, const QString& theXmlRepr,
 787                                    QList<ModuleBase_ModelWidget*>& theWidgets) const
 788 {
 789   bool aProcessed = false;
 790
 791   XGUI_Workshop* aWorkshop = getWorkshop();
 792   XGUI_PropertyPanel* aPropertyPanel = aWorkshop->propertyPanel();
 793   if (mySketchMgr->activeSketch().get() && aPropertyPanel) {
 794     ModuleBase_ISelection* aSelection = workshop()->selection();
 795     // click on a point in sketch leads here with the point is highlighted, not yet selected
 796     QList<ModuleBase_ViewerPrsPtr> aPreselection = aSelection->getHighlighted();
 797     if (aPreselection.size() == 1) {
 798       ModuleBase_ViewerPrsPtr aSelectedPrs = aPreselection[0];
 799       ObjectPtr anObject = aSelectedPrs->object();
 800
 801       FeaturePtr aFeature = ModelAPI_Feature::feature(anObject);
 802       GeomShapePtr aShape = aSelectedPrs->shape();
 803       // click on the digit of dimension constrain comes here
 804       // with an empty shape, so we need the check
 805       if (aFeature == theFeature && aShape.get() && !aShape->isNull()) {
 806         // if feature has only one result and shape of result is equal to selected shape
 807         // this attribute is not processed. It is a case of Sketch Point.
 808         if (aFeature->results().size() == 1) {
 809           ResultPtr aResult = aFeature->results().front();
 810           if (aResult.get() && aResult->shape()->isEqual(aShape))
 811             return aProcessed;
 812         }
 813         const TopoDS_Shape& aTDShape = aShape->impl<TopoDS_Shape>();
 814         std::pair<AttributePtr, int> anAttribute =
 815             PartSet_Tools::findAttributeBy2dPoint(anObject, aTDShape, mySketchMgr->activeSketch());
 816         if (anAttribute.first.get()) {
 817           ModuleBase_WidgetFactory aFactory(theXmlRepr.toStdString(), workshop());
 818
 819           const std::string anAttributeId = anAttribute.first->id();
 820           aFactory.createWidget(aPropertyPanel->contentWidget(), anAttributeId);
 821
 822           theWidgets = aFactory.getModelWidgets();
 823           // it is possible that the point does not present in XML definition,
 824           // in this case, we assume that it is not processed by this module
 825           // e.g. "Intersection point" feature
 826           aProcessed = !theWidgets.isEmpty();
 827         }
 828       }
 829     }
 830   }
 831   return aProcessed;
 832 }
 833
 834 //******************************************************
 835 void PartSet_Module::onSelectionChanged()
 836 {
 837   ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
 838   if (!aOperation)
 839     return;
 840
 841   bool isSketcherOp = false;
 842   // An edit operation is enable only if the current opeation is the sketch operation
 843   if (mySketchMgr->activeSketch()) {
 844     if (PartSet_Tools::sketchPlane(mySketchMgr->activeSketch()))
 845       isSketcherOp = PartSet_SketcherMgr::isSketchOperation(aOperation);
 846   }
 847   if (isSketcherOp) {
 848     // Editing of constraints can be done on selection
 849     ModuleBase_ISelection* aSelect = myWorkshop->selection();
 850     QList<ModuleBase_ViewerPrsPtr> aSelected = aSelect->getSelected();
 851     if (aSelected.size() == 1) {
 852       ModuleBase_ViewerPrsPtr aPrs = aSelected.first();
 853       ObjectPtr aObject = aPrs->object();
 854       FeaturePtr aFeature = ModelAPI_Feature::feature(aObject);
 855       if (aFeature) {
 856         std::string aId = aFeature->getKind();
 857         if ((aId == SketchPlugin_ConstraintRadius::ID()) ||
 858             (aId == SketchPlugin_ConstraintLength::ID()) ||
 859             (aId == SketchPlugin_ConstraintDistance::ID()) ||
 860             (aId == SketchPlugin_ConstraintAngle::ID())) {
 861           editFeature(aFeature);
 862         }
 863       }
 864     }
 865   }
 866 }
 867
 868 //******************************************************
 869 void PartSet_Module::onKeyRelease(ModuleBase_IViewWindow* theWnd, QKeyEvent* theEvent)
 870 {
 871   XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
 872   XGUI_OperationMgr* anOpMgr = aConnector->workshop()->operationMgr();
 873   anOpMgr->onKeyReleased(theWnd->viewPort(), theEvent);
 874 }
 875
 876 //******************************************************
 877 ModuleBase_ModelWidget* PartSet_Module::createWidgetByType(const std::string& theType,
 878                                                            QWidget* theParent,
 879                                                            Config_WidgetAPI* theWidgetApi)
 880 {
 881   ModuleBase_IWorkshop* aWorkshop = workshop();
 882   ModuleBase_ModelWidget* aWgt = NULL;
 883   if (theType == "sketch-start-label") {
 884     PartSet_WidgetSketchLabel* aLabelWgt = new PartSet_WidgetSketchLabel(theParent, aWorkshop,
 885                                                                theWidgetApi, myHasConstraintShown);
 886     connect(aLabelWgt, SIGNAL(planeSelected(const std::shared_ptr<GeomAPI_Pln>&)),
 887       mySketchMgr, SLOT(onPlaneSelected(const std::shared_ptr<GeomAPI_Pln>&)));
 888     connect(aLabelWgt, SIGNAL(showConstraintToggled(int, bool)),
 889       mySketchMgr, SLOT(onShowConstraintsToggle(int, bool)));
 890     connect(aLabelWgt, SIGNAL(showFreePoints(bool)), mySketchMgr, SLOT(onShowPoints(bool)));
 891     connect(aLabelWgt, SIGNAL(autoConstraints(bool)),
 892       sketchReentranceMgr(), SLOT(onAutoConstraints(bool)));
 893     aLabelWgt->setShowPointsState(mySketchMgr->isShowFreePointsShown());
 894     aWgt = aLabelWgt;
 895   } else if (theType == "sketch-2dpoint_selector") {
 896     PartSet_WidgetPoint2D* aPointWgt = new PartSet_WidgetPoint2D(theParent, aWorkshop,
 897                                                                  theWidgetApi);
 898     aPointWgt->setSketch(mySketchMgr->activeSketch());
 899     connect(aPointWgt, SIGNAL(vertexSelected()), sketchReentranceMgr(), SLOT(onVertexSelected()));
 900     aWgt = aPointWgt;
 901   }else if (theType == "sketch-2dpoint_flyout_selector") {
 902     PartSet_WidgetPoint2DFlyout* aPointWgt = new PartSet_WidgetPoint2DFlyout(theParent, aWorkshop,
 903                                                                              theWidgetApi);
 904     aPointWgt->setSketch(mySketchMgr->activeSketch());
 905     connect(aPointWgt, SIGNAL(vertexSelected()), sketchReentranceMgr(), SLOT(onVertexSelected()));
 906     aWgt = aPointWgt;
 907   } else if (theType == "sketch_shape_selector") {
 908     PartSet_WidgetShapeSelector* aShapeSelectorWgt =
 909                           new PartSet_WidgetShapeSelector(theParent, aWorkshop, theWidgetApi);
 910     aShapeSelectorWgt->setSketcher(mySketchMgr->activeSketch());
 911     aWgt = aShapeSelectorWgt;
 912   } else if (theType == "sketch_multi_selector") {
 913     PartSet_WidgetMultiSelector* aShapeSelectorWgt =
 914                           new PartSet_WidgetMultiSelector(theParent, aWorkshop, theWidgetApi);
 915     aShapeSelectorWgt->setSketcher(mySketchMgr->activeSketch());
 916     aWgt = aShapeSelectorWgt;
 917   }
 918   else if (theType == "sketch_feature_point_selector") {
 919     PartSet_WidgetFeaturePointSelector* aPointSelectorWgt =
 920             new PartSet_WidgetFeaturePointSelector(theParent, aWorkshop, theWidgetApi);
 921     aPointSelectorWgt->setSketcher(mySketchMgr->activeSketch());
 922     aWgt = aPointSelectorWgt;
 923   }
 924   else if (theType == "sketch-bspline_selector") {
 925     PartSet_WidgetBSplinePoints* aBSplineWgt =
 926         new PartSet_WidgetBSplinePoints(theParent, aWorkshop, theWidgetApi);
 927     aBSplineWgt->setSketch(mySketchMgr->activeSketch());
 928     aWgt = aBSplineWgt;
 929   }
 930   else if (theType == WDG_DOUBLEVALUE_EDITOR) {
 931     aWgt = new PartSet_WidgetEditor(theParent, aWorkshop, theWidgetApi);
 932   } else if (theType == "export_file_selector") {
 933     aWgt = new PartSet_WidgetFileSelector(theParent, aWorkshop, theWidgetApi);
 934   } else if (theType == "sketch_launcher") {
 935     aWgt = new PartSet_WidgetSketchCreator(theParent, this, theWidgetApi);
 936   }
 937   else if (theType == "module_choice") {
 938     aWgt = new ModuleBase_WidgetChoice(theParent, theWidgetApi);
 939     connect(aWgt, SIGNAL(itemSelected(ModuleBase_ModelWidget*, int)),
 940       this, SLOT(onChoiceChanged(ModuleBase_ModelWidget*, int)));
 941   } else if (theType == "bspline-panel") {
 942     PartSet_BSplineWidget* aPanel = new PartSet_BSplineWidget(theParent, theWidgetApi);
 943     //aPanel->setFeature(theFeature);
 944     aWgt = aPanel;
 945   }
 946   return aWgt;
 947 }
 948
 949 //******************************************************
 950 ModuleBase_ModelWidget* PartSet_Module::activeWidget() const
 951 {
 952   ModuleBase_ModelWidget* anActiveWidget = 0;
 953
 954   ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
 955   if (!aOperation)
 956     return anActiveWidget;
 957
 958   ModuleBase_IPropertyPanel* aPanel = aOperation->propertyPanel();
 959   if (!aPanel)
 960     return anActiveWidget;
 961
 962   return aPanel->activeWidget(true);
 963 }
 964
 965 //******************************************************
 966 bool PartSet_Module::deleteObjects()
 967 {
 968   bool isProcessed = false;
 969
 970   XGUI_Workshop* aWorkshop = getWorkshop();
 971   XGUI_OperationMgr* anOpMgr = aWorkshop->operationMgr();
 972
 973   //SessionPtr aMgr = ModelAPI_Session::get();
 974   // 1. check whether the delete should be processed in the module
 975   ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
 976   bool isSketchOp = PartSet_SketcherMgr::isSketchOperation(anOperation),
 977        isNestedOp = sketchMgr()->isNestedSketchOperation(anOperation);
 978   if (isSketchOp || isNestedOp) {
 979     isProcessed = true;
 980     // 2. find selected presentations
 981     // selected objects should be collected before the current operation abort because
 982     // the abort leads to selection lost on constraint objects. It can be corrected after #386 issue
 983     ModuleBase_ISelection* aSel = workshop()->selection();
 984     QObjectPtrList aSelectedObj = aSel->selectedPresentations();
 985     // if there are no selected objects in the viewer, that means that the selection in another
 986     // place cased this method. It is necessary to return the false value to understande in above
 987     // method that delete is not processed
 988     if (aSelectedObj.count() == 0)
 989       return false;
 990
 991     // avoid delete of the objects, which are not belong to the current sketch
 992     // in order to do not delete results of other sketches
 993     QObjectPtrList aSketchObjects;
 994     QObjectPtrList::const_iterator anIt = aSelectedObj.begin(), aLast = aSelectedObj.end();
 995     for ( ; anIt != aLast; anIt++) {
 996       ObjectPtr anObject = *anIt;
 997       if (mySketchMgr->isObjectOfSketch(anObject)) {
 998         // sketch feature should be used in this list because workshop deletes features only
 999         // results are skipped
1000         FeaturePtr aSketchFeature = ModelAPI_Feature::feature(anObject);
1001         aSketchObjects.append(aSketchFeature);
1002       }
1003     }
1004     // if the selection contains only local selected presentations from other sketches,
1005     // the Delete operation should not be done at all
1006     if (aSketchObjects.size() == 0)
1007       return true;
1008
1009     // 3. start operation
1010     QString aDescription = aWorkshop->contextMenuMgr()->action("DELETE_CMD")->text();
1011     ModuleBase_Operation* anOpAction = new ModuleBase_Operation(aDescription, this);
1012
1013     // the active nested sketch operation should be aborted unconditionally
1014     // the Delete action should be additionally granted for the Sketch operation
1015     // in order to do not abort/commit it
1016     bool isCommitted;
1017     if (!anOpMgr->canStartOperation(anOpAction->id(), isCommitted))
1018       return true; // the objects are processed but can not be deleted
1019
1020     anOpMgr->startOperation(anOpAction);
1021
1022     // WORKAROUND, should be done to avoid viewer highlight update after deletetion of objects
1023     // the problem is in AIS Dimensions recompute
1024     // if a line and the dim are removed, line is the first
1025     // it causes the AIS recompute, where the base line is null,
1026     // the result is empty AIS in the viewer
1027     XGUI_Tools::workshop(myWorkshop)->selector()->clearSelection();
1028
1029     // 4. delete features
1030     // sketch feature should be skipped, only sub-features can be removed
1031     // when sketch operation is active
1032     aWorkshop->deleteFeatures(aSketchObjects);
1033     // 5. stop operation
1034     anOpMgr->commitOperation();
1035   }
1036   return isProcessed;
1037 }
1038
1039 //******************************************************
1040 void PartSet_Module::editFeature(FeaturePtr theFeature)
1041 {
1042   storeConstraintsState(theFeature->getKind());
1043   ModuleBase_IModule::editFeature(theFeature);
1044 }
1045
1046 //******************************************************
1047 bool PartSet_Module::canCommitOperation() const
1048 {
1049   return true;
1050 }
1051
1052 //******************************************************
1053 void PartSet_Module::launchOperation(const QString& theCmdId, const bool& isStartAfterCommitOnly)
1054 {
1055   myIsOperationIsLaunched = true;
1056   storeConstraintsState(theCmdId.toStdString());
1057   updateConstraintsState(theCmdId.toStdString());
1058
1059   ModuleBase_IModule::launchOperation(theCmdId, isStartAfterCommitOnly);
1060
1061   myIsOperationIsLaunched = false;
1062 }
1063
1064 //******************************************************
1065 void PartSet_Module::storeConstraintsState(const std::string& theFeatureKind)
1066 {
1067   if (myWorkshop->currentOperation() &&
1068       myWorkshop->currentOperation()->id().toStdString() == SketchPlugin_Sketch::ID()) {
1069     const QMap<PartSet_Tools::ConstraintVisibleState, bool>& aShownStates =
1070                                                   mySketchMgr->showConstraintStates();
1071     myHasConstraintShown = aShownStates;
1072   }
1073 }
1074
1075 //******************************************************
1076 void PartSet_Module::updateConstraintsState(const std::string& theFeatureKind)
1077 {
1078   if (PartSet_SketcherMgr::constraintsIdList().contains(theFeatureKind.c_str()) ||
1079       PartSet_SketcherMgr::replicationsIdList().contains(theFeatureKind.c_str())) {
1080     // Show constraints if a constraint was anOperation
1081     mySketchMgr->updateBySketchParameters(PartSet_Tools::Geometrical, true);
1082     mySketchMgr->updateBySketchParameters(PartSet_Tools::Dimensional, true);
1083     mySketchMgr->updateBySketchParameters(PartSet_Tools::Expressions,
1084                                           myHasConstraintShown[PartSet_Tools::Expressions]);
1085   }
1086 }
1087
1088 //******************************************************
1089 void PartSet_Module::onObjectDisplayed(ObjectPtr theObject, AISObjectPtr theAIS)
1090 {
1091   Handle(AIS_InteractiveObject) anAIS = theAIS->impl<Handle(AIS_InteractiveObject)>();
1092   if (!anAIS.IsNull()) {
1093     FeaturePtr aFeature = ModelAPI_Feature::feature(theObject);
1094     if (aFeature.get()) {
1095       bool aToUseZLayer = false;
1096       if (PartSet_Tools::findRefsToMeFeature(aFeature,SketchPlugin_Projection::ID()))
1097         aToUseZLayer = true;
1098       else {
1099         CompositeFeaturePtr aParent = ModelAPI_Tools::compositeOwner(aFeature);
1100         aToUseZLayer = (aParent.get() && (aParent->getKind() == SketchPlugin_Sketch::ID()));
1101       }
1102       if (aToUseZLayer) {
1103         Handle(AIS_InteractiveContext) aCtx = anAIS->GetContext();
1104         if (aFeature->getKind() == SketchPlugin_ConstraintCoincidence::ID())
1105           aCtx->SetZLayer(anAIS, Graphic3d_ZLayerId_Top);
1106         else
1107           aCtx->SetZLayer(anAIS, myVisualLayerId);
1108       }
1109     }
1110   }
1111 }
1112
1113 //******************************************************
1114 void PartSet_Module::onBeforeObjectErase(ObjectPtr theObject, AISObjectPtr theAIS)
1115 {
1116   // this is obsolete
1117   // it should be recomputed in order to disappear in the viewer if the corresponded object
1118   // is erased
1119   //if (myCustomPrs->isActive())
1120   //  myCustomPrs->redisplay(theObject, false);
1121 }
1122
1123 //******************************************************
1124 void PartSet_Module::onViewTransformed(int theTrsfType)
1125 {
1126   // Set length of arrows constant in pixel size
1127   // if the operation is panning or rotate or panglobal then do nothing
1128   if ((theTrsfType == 1) || (theTrsfType == 3) || (theTrsfType == 4))
1129     return;
1130   ModuleBase_IViewer* aViewer = myWorkshop->viewer();
1131   Handle(AIS_InteractiveContext) aContext = aViewer->AISContext();
1132   if (aContext.IsNull())
1133     return;
1134
1135   //Handle(V3d_View) aView = aViewer->activeView();
1136
1137   XGUI_Workshop* aWorkshop = getWorkshop();
1138   XGUI_Displayer* aDisplayer = aWorkshop->displayer();
1139   Handle(V3d_Viewer) aV3dViewer = aContext->CurrentViewer();
1140   Handle(V3d_View) aView;
1141   double aScale = 0;
1142   for (aV3dViewer->InitDefinedViews();
1143        aV3dViewer->MoreDefinedViews();
1144        aV3dViewer->NextDefinedViews()) {
1145     Handle(V3d_View) aV = aV3dViewer->DefinedView();
1146     double aS = aV->Scale();
1147     if (aS > aScale) {
1148       aScale = aS;
1149       aView = aV;
1150     }
1151   }
1152   if (aView.IsNull())
1153     return;
1154
1155   bool isModified = false;
1156   double aLen = aView->Convert(SketcherPrs_Tools::getConfigArrowSize());
1157   ModuleBase_Operation* aCurrentOperation = myWorkshop->currentOperation();
1158   if (aCurrentOperation &&
1159     (PartSet_SketcherMgr::isSketchOperation(aCurrentOperation) ||
1160      sketchMgr()->isNestedSketchOperation(aCurrentOperation) ||
1161      (aCurrentOperation->id() == "Measurement")))
1162   {
1163     SketcherPrs_Tools::setArrowSize(aLen);
1164     const double aCurScale = aViewer->activeView()->Camera()->Scale();
1165     aViewer->SetScale(aViewer->activeView(), aCurScale);
1166 #ifdef OPTIMIZE_PRS
1167     QList<Handle(AIS_InteractiveObject)> aPrsList = aDisplayer->displayedPresentations();
1168     foreach(Handle(AIS_InteractiveObject) aAisObj, aPrsList) {
1169 #else
1170     QList<AISObjectPtr> aPrsList = aDisplayer->displayedPresentations();
1171     foreach(AISObjectPtr aAIS, aPrsList) {
1172       Handle(AIS_InteractiveObject) aAisObj = aAIS->impl<Handle(AIS_InteractiveObject)>();
1173 #endif
1174       Handle(AIS_Dimension) aDim = Handle(AIS_Dimension)::DownCast(aAisObj);
1175       if (!aDim.IsNull()) {
1176         aDim->DimensionAspect()->ArrowAspect()->SetLength(aLen);
1177         aContext->Redisplay(aDim, false);
1178         isModified = true;
1179       }
1180     }
1181   }
1182
1183   // Manage trihedron arrows
1184   if (Config_PropManager::boolean("Visualization", "zoom_trihedron_arrows")) {
1185     Handle(AIS_Trihedron) aTrihedron = aViewer->trihedron();
1186     if (!aTrihedron.IsNull()) {
1187       double aAxLen =
1188         aView->Convert(Config_PropManager::integer("Visualization", "axis_arrow_size"));
1189       Handle(Prs3d_DatumAspect) aDatumAspect = aTrihedron->Attributes()->DatumAspect();
1190       double aAxisLen = aDatumAspect->AxisLength(Prs3d_DP_XAxis);
1191       aDatumAspect->SetAttribute(Prs3d_DP_ShadingConeLengthPercent, aAxLen / aAxisLen);
1192       aTrihedron->Attributes()->SetDatumAspect(aDatumAspect);
1193       aContext->Redisplay(aTrihedron, false);
1194       isModified = true;
1195     }
1196   }
1197   if (isModified)
1198     aDisplayer->updateViewer();
1199 }
1200
1201 //******************************************************
1202 bool PartSet_Module::isCustomPrsActivated(const ModuleBase_CustomizeFlag& theFlag) const
1203 {
1204   return myCustomPrs->isActive(theFlag);
1205 }
1206
1207 //******************************************************
1208 void PartSet_Module::activateCustomPrs(const FeaturePtr& theFeature,
1209                                        const ModuleBase_CustomizeFlag& theFlag,
1210                                        const bool theUpdateViewer)
1211 {
1212   myCustomPrs->activate(theFeature, theFlag, theUpdateViewer);
1213 }
1214
1215 //******************************************************
1216 void PartSet_Module::deactivateCustomPrs(const ModuleBase_CustomizeFlag& theFlag,
1217                                          const bool theUpdateViewer)
1218 {
1219   myCustomPrs->deactivate(theFlag, theUpdateViewer);
1220 }
1221
1222 //******************************************************
1223 //bool PartSet_Module::customisePresentation(ResultPtr theResult, AISObjectPtr thePrs,
1224 //                                           std::shared_ptr<GeomAPI_ICustomPrs> theCustomPrs)
1225 //{
1226 //  bool aCustomized = false;
1227 //
1228 //  XGUI_Workshop* aWorkshop = getWorkshop();
1229 //  XGUI_Displayer* aDisplayer = aWorkshop->displayer();
1230 //  ObjectPtr anObject = aDisplayer->getObject(thePrs);
1231 //  if (!anObject)
1232 //    return aCustomized;
1233 //
1234 //  if (!theResult.get()) {
1235 //    std::vector<int> aColor;
1236 //    XGUI_CustomPrs::getDefaultColor(anObject, true, aColor);
1237 //    if (!aColor.empty()) {
1238 //      aCustomized = thePrs->setColor(aColor[0], aColor[1], aColor[2]);
1239 //    }
1240 //  }
1241 //  // customize dimentional constrains
1242 //  sketchMgr()->customisePresentation(anObject);
1243 //
1244 //  return aCustomized;
1245 //}
1246 //
1247 ////******************************************************
1248 //bool PartSet_Module::afterCustomisePresentation(std::shared_ptr<ModelAPI_Result> theResult,
1249 //                                                AISObjectPtr thePrs,
1250 //                                                GeomCustomPrsPtr theCustomPrs)
1251 //{
1252 //  bool aCustomized = false;
1253 //
1254 //  XGUI_Workshop* aWorkshop = getWorkshop();
1255 //  XGUI_Displayer* aDisplayer = aWorkshop->displayer();
1256 //  ObjectPtr anObject = aDisplayer->getObject(thePrs);
1257 //  if (!anObject)
1258 //    return aCustomized;
1259 //
1260 //  std::vector<int> aColor;
1261 //  bool aUseCustomColor = true;
1262 //  if (aUseCustomColor)
1263 //    myOverconstraintListener->getCustomColor(anObject, aColor);
1264 //  // customize sketch symbol presentation
1265 //  Handle(AIS_InteractiveObject) anAISIO = thePrs->impl<Handle(AIS_InteractiveObject)>();
1266 //  if (!anAISIO.IsNull()) {
1267 //    if (!Handle(SketcherPrs_SymbolPrs)::DownCast(anAISIO).IsNull()) {
1268 //      Handle(SketcherPrs_SymbolPrs) aPrs = Handle(SketcherPrs_SymbolPrs)::DownCast(anAISIO);
1269 //      if (!aPrs.IsNull()) {
1270 //        aPrs->SetCustomColor(aColor);
1271 //        aCustomized = true;
1272 //      }
1273 //    } else if (!Handle(SketcherPrs_Coincident)::DownCast(anAISIO).IsNull()) {
1274 //      Handle(SketcherPrs_Coincident) aPrs = Handle(SketcherPrs_Coincident)::DownCast(anAISIO);
1275 //      if (!aPrs.IsNull()) {
1276 //        aPrs->SetCustomColor(aColor);
1277 //        aCustomized = true;
1278 //      }
1279 //    }
1280 //  }
1281 //  // customize sketch dimension constraint presentation
1282 //  if (!aCustomized) {
1283 //    if (!aColor.empty()) { // otherwise presentation has the default color
1284 //      aCustomized = thePrs->setColor(aColor[0], aColor[1], aColor[2]);
1285 //    }
1286 //  }
1287 //  return aCustomized;
1288 //}
1289
1290 //******************************************************
1291 bool PartSet_Module::customizeFeature(ObjectPtr theObject, const ModuleBase_CustomizeFlag& theFlag,
1292                                      const bool theUpdateViewer)
1293 {
1294   bool isRedisplayed = false;
1295   if (myCustomPrs->isActive(theFlag))
1296     isRedisplayed = myCustomPrs->redisplay(theObject, theFlag, theUpdateViewer);
1297
1298   return isRedisplayed;
1299 }
1300
1301 //******************************************************
1302 void PartSet_Module::customizeObjectBrowser(QWidget* theObjectBrowser)
1303 {
1304   XGUI_ObjectsBrowser* aOB = dynamic_cast<XGUI_ObjectsBrowser*>(theObjectBrowser);
1305   if (aOB) {
1306     QLabel* aLabel = aOB->activeDocLabel();
1307     aLabel->installEventFilter(myMenuMgr);
1308     connect(aLabel, SIGNAL(customContextMenuRequested(const QPoint&)),
1309           SLOT(onActiveDocPopup(const QPoint&)));
1310     aOB->treeView()->setExpandsOnDoubleClick(false);
1311     connect(aOB->treeView(), SIGNAL(doubleClicked(const QModelIndex&)),
1312       SLOT(onTreeViewDoubleClick(const QModelIndex&)));
1313
1314     Events_Loop* aLoop = Events_Loop::loop();
1315     aLoop->registerListener(this, Events_Loop::eventByName(EVENT_OBJECT_CREATED));
1316   }
1317 }
1318
1319 //******************************************************
1320 void PartSet_Module::onActiveDocPopup(const QPoint& thePnt)
1321 {
1322   SessionPtr aMgr = ModelAPI_Session::get();
1323   QAction* aActivatePartAction = myMenuMgr->action("ACTIVATE_PARTSET_CMD");
1324
1325   XGUI_Workshop* aWorkshop = getWorkshop();
1326   QLabel* aHeader = aWorkshop->objectBrowser()->activeDocLabel();
1327
1328   aActivatePartAction->setEnabled((aMgr->activeDocument() != aMgr->moduleDocument()));
1329
1330   QMenu aMenu;
1331   aMenu.addAction(aActivatePartAction);
1332
1333 #ifndef HAVE_SALOME
1334   if (aMgr->activeDocument() == aMgr->moduleDocument()) {
1335     DocumentPtr aDoc = aMgr->moduleDocument();
1336     int aNbParts = aDoc->size(ModelAPI_ResultPart::group());
1337     bool aHaveToActivate = false;
1338     for (int i = 0; i < aNbParts; i++) {
1339       ObjectPtr aObj = aDoc->object(ModelAPI_ResultPart::group(), i);
1340       ResultPartPtr aPartRes = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aObj);
1341       if (!aPartRes->partDoc().get()) {
1342         aHaveToActivate = true;
1343         break;
1344       }
1345     }
1346     if (aHaveToActivate) {
1347       QAction* aActivateAllPartAction = myMenuMgr->action("ACTIVATE_ALL_PARTS_CMD");
1348       aMenu.addAction(aActivateAllPartAction);
1349     }
1350   }
1351 #endif
1352
1353   aMenu.exec(aHeader->mapToGlobal(thePnt));
1354 }
1355
1356 //******************************************************
1357 AISObjectPtr PartSet_Module::createPresentation(const ObjectPtr& theObject)
1358 {
1359   Handle(AIS_InteractiveObject) anAISPrs = mySketchMgr->createPresentation(theObject);
1360   if (anAISPrs.IsNull()) {
1361     ResultPtr aResult = std::dynamic_pointer_cast<ModelAPI_Result>(theObject);
1362     if (aResult.get()) {
1363       std::shared_ptr<GeomAPI_Shape> aShapePtr = ModelAPI_Tools::shape(aResult);
1364       if (aShapePtr.get() != NULL)
1365         anAISPrs = new ModuleBase_ResultPrs(aResult);
1366     }
1367     else {
1368       FieldStepPtr aStep =
1369         std::dynamic_pointer_cast<ModelAPI_ResultField::ModelAPI_FieldStep>(theObject);
1370       if (aStep.get()) {
1371         anAISPrs = new PartSet_FieldStepPrs(aStep);
1372       }
1373     }
1374   }
1375   AISObjectPtr anAIS;
1376   if (!anAISPrs.IsNull()) {
1377     Handle(AIS_Shape) aShapePrs = Handle(AIS_Shape)::DownCast(anAISPrs);
1378     if (!aShapePrs.IsNull())
1379       ModuleBase_Tools::setPointBallHighlighting((AIS_Shape*)aShapePrs.get());
1380
1381     anAIS = AISObjectPtr(new GeomAPI_AISObject());
1382     anAIS->setImpl(new Handle(AIS_InteractiveObject)(anAISPrs));
1383     customizePresentation(theObject, anAIS);
1384   }
1385   return anAIS;
1386 }
1387
1388 //******************************************************
1389 void getResultColor(const ResultPtr& theResult, std::vector<int>& theColor)
1390 {
1391   ModelAPI_Tools::getColor(theResult, theColor);
1392   if (theColor.empty())
1393     PartSet_Tools::getDefaultColor(theResult, false, theColor);
1394 }
1395
1396 //******************************************************
1397 double getResultDeflection(const ResultPtr& theResult)
1398 {
1399   double aDeflection = ModelAPI_Tools::getDeflection(theResult);
1400   if (aDeflection < 0)
1401     aDeflection = PartSet_Tools::getDefaultDeflection(theResult);
1402   return aDeflection;
1403 }
1404
1405 //******************************************************
1406 double getResultTransparency(const ResultPtr& theResult)
1407 {
1408   double aTransparency = ModelAPI_Tools::getTransparency(theResult);
1409   if (aTransparency < 0)
1410     aTransparency = PartSet_Tools::getDefaultTransparency();
1411   return aTransparency;
1412 }
1413
1414
1415 //******************************************************
1416 void PartSet_Module::customizePresentation(const ObjectPtr& theObject,
1417                                            const AISObjectPtr& thePrs) const
1418 {
1419   if (mySketchMgr->isObjectOfSketch(theObject)) {
1420     mySketchMgr->customizeSketchPresentation(theObject, thePrs);
1421   }
1422   else {
1423     ResultPtr aResult = std::dynamic_pointer_cast<ModelAPI_Result>(theObject);
1424     if (aResult.get()) {
1425       std::vector<int> aColor;
1426       getResultColor(aResult, aColor);
1427
1428       SessionPtr aMgr = ModelAPI_Session::get();
1429       if (aMgr->activeDocument() != aResult->document()) {
1430         QColor aQColor(aColor[0], aColor[1], aColor[2]);
1431         QColor aNewColor =
1432           QColor::fromHsvF(aQColor.hueF(), aQColor.saturationF() / 3., aQColor.valueF());
1433         aColor[0] = aNewColor.red();
1434         aColor[1] = aNewColor.green();
1435         aColor[2] = aNewColor.blue();
1436       }
1437       thePrs->setColor(aColor[0], aColor[1], aColor[2]);
1438
1439       thePrs->setDeflection(getResultDeflection(aResult));
1440
1441       thePrs->setTransparency(getResultTransparency(aResult));
1442     }
1443     FeaturePtr aFeature = ModelAPI_Feature::feature(theObject);
1444     if (aFeature.get()) {
1445       if (aFeature->getKind() == SketchPlugin_Sketch::ID())
1446         thePrs->setWidth(2);
1447     }
1448   }
1449 }
1450
1451
1452 //******************************************************
1453 ObjectPtr PartSet_Module::findPresentedObject(const AISObjectPtr& theAIS) const
1454 {
1455   ObjectPtr anObject;
1456   ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
1457   if (aOperation) {
1458     /// If last line finished on vertex the lines creation sequence has to be break
1459     ModuleBase_IPropertyPanel* aPanel = aOperation->propertyPanel();
1460     if (aPanel) {
1461       ModuleBase_ModelWidget* anActiveWidget = aPanel->activeWidget();
1462       // if there is an active widget, find the presented object in it
1463       if (!anActiveWidget)
1464         anActiveWidget = aPanel->preselectionWidget();
1465
1466       ModuleBase_WidgetValidated* aWidgetValidated = dynamic_cast<ModuleBase_WidgetValidated*>
1467                                                                              (anActiveWidget);
1468       if (aWidgetValidated)
1469         anObject = aWidgetValidated->findPresentedObject(theAIS);
1470     }
1471   }
1472   return anObject;
1473 }
1474
1475 //******************************************************
1476 bool PartSet_Module::canBeShaded(Handle(AIS_InteractiveObject) theAIS) const
1477 {
1478   bool aCanBeShaged = true;
1479
1480   Handle(PartSet_ResultSketchPrs) aPrs = Handle(PartSet_ResultSketchPrs)::DownCast(theAIS);
1481   if (!aPrs.IsNull())
1482     aCanBeShaged = false;
1483
1484   return aCanBeShaged;
1485 }
1486
1487 //******************************************************
1488 void PartSet_Module::addObjectBrowserMenu(QMenu* theMenu) const
1489 {
1490   QObjectPtrList aObjects = myWorkshop->selection()->selectedObjects();
1491   int aSelected = aObjects.size();
1492   SessionPtr aMgr = ModelAPI_Session::get();
1493   QAction* aActivatePartAction = myMenuMgr->action("ACTIVATE_PART_CMD");
1494
1495   bool hasResult = false;
1496   bool hasFeature = false;
1497   bool hasParameter = false;
1498   bool hasCompositeOwner = false;
1499   bool hasResultInHistory = false;
1500   bool hasFolder = false;
1501   ModuleBase_Tools::checkObjects(aObjects, hasResult, hasFeature, hasParameter,
1502                                   hasCompositeOwner, hasResultInHistory, hasFolder);
1503
1504   ModuleBase_Operation* aCurrentOp = myWorkshop->currentOperation();
1505   if (aSelected == 1) {
1506     ObjectPtr aObject = aObjects.first();
1507     if (aObject) {
1508       ResultPartPtr aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aObject);
1509       FeaturePtr aFeature = std::dynamic_pointer_cast<ModelAPI_Feature>(aObject);
1510       bool isPart = aPart.get() ||
1511         (aFeature.get() && (aFeature->getKind() == PartSetPlugin_Part::ID()));
1512       if (isPart) {
1513         DocumentPtr aPartDoc;
1514         if (!aPart.get()) {
1515           aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aFeature->firstResult());
1516         }
1517         if (aPart.get()) // this may be null is Part feature is disabled
1518           aPartDoc = aPart->partDoc();
1519
1520         theMenu->addAction(aActivatePartAction);
1521         aActivatePartAction->setEnabled((aMgr->activeDocument() != aPartDoc));
1522
1523       } else if (aObject->document() == aMgr->activeDocument()) {
1524         if (hasParameter || hasFeature) {
1525           myMenuMgr->action("EDIT_CMD")->setEnabled(true);
1526           theMenu->addAction(myMenuMgr->action("EDIT_CMD"));
1527           if (aCurrentOp && aFeature.get()) {
1528             if (aCurrentOp->id().toStdString() == aFeature->getKind())
1529               myMenuMgr->action("EDIT_CMD")->setEnabled(false);
1530           }
1531         }
1532       }
1533     }
1534   } else {
1535     if (hasFeature) {
1536       myMenuMgr->action("EDIT_CMD")->setEnabled(aCurrentOp == 0);
1537       theMenu->addAction(myMenuMgr->action("EDIT_CMD"));
1538       theMenu->addSeparator();
1539     }
1540   }
1541   bool aNotDeactivate = (aCurrentOp == 0);
1542   if (!aNotDeactivate) {
1543     aActivatePartAction->setEnabled(false);
1544   }
1545 }
1546
1547 //******************************************************
1548 #define EXPAND_PARENT(OBJ) \
1549 QModelIndex aObjIndex = aDataModel->objectIndex(OBJ); \
1550 if (aObjIndex.isValid()) { \
1551   QModelIndex aParent = aObjIndex.parent(); \
1552   int aCount = aDataModel->rowCount(aParent); \
1553   if (aCount == 1) \
1554     aTreeView->setExpanded(aParent, true); \
1555 }
1556
1557 //******************************************************
1558 void PartSet_Module::processEvent(const std::shared_ptr<Events_Message>& theMessage)
1559 {
1560   if (theMessage->eventID() == Events_Loop::loop()->eventByName(EVENT_DOCUMENT_CHANGED)) {
1561     SessionPtr aMgr = ModelAPI_Session::get();
1562     if (!aMgr->hasModuleDocument()) // if document is closed, do not call the document creation
1563       return;
1564     // Do not change activation of parts if an operation active
1565     static QStringList aAllowActivationList;
1566     if (aAllowActivationList.isEmpty())
1567       aAllowActivationList <<
1568       QString(PartSetPlugin_Part::ID().c_str()) <<
1569       QString(PartSetPlugin_Duplicate::ID().c_str()) <<
1570       QString(PartSetPlugin_Remove::ID().c_str());
1571     if (myWorkshop->currentOperation() &&
1572       (!aAllowActivationList.contains(myWorkshop->currentOperation()->id())))
1573       return;
1574     XGUI_Workshop* aWorkshop = getWorkshop();
1575     bool needUpdate = false;
1576     XGUI_DataTree* aTreeView = 0;
1577     if (aWorkshop->objectBrowser()) {
1578       aTreeView = aWorkshop->objectBrowser()->treeView();
1579       QLabel* aLabel = aWorkshop->objectBrowser()->activeDocLabel();
1580       QPalette aPalet = aLabel->palette();
1581
1582       DocumentPtr aActiveDoc = aMgr->activeDocument();
1583
1584       // Clear active part index if there is no Part documents
1585       // It could be not null if document was closed and opened a new
1586       // without closeDocument call
1587       if (aMgr->allOpenedDocuments().size() <= 1)
1588         myActivePartIndex = QModelIndex();
1589
1590       XGUI_DataModel* aDataModel = aWorkshop->objectBrowser()->dataModel();
1591       QModelIndex aOldActive = myActivePartIndex;
1592       myActivePartIndex = aDataModel->documentRootIndex(aActiveDoc, 0);
1593       if (myActivePartIndex.isValid()) {
1594         needUpdate = aTreeView->isExpanded(myActivePartIndex);
1595         if (!needUpdate)
1596           aTreeView->setExpanded(myActivePartIndex, true);
1597       }
1598       if ((aOldActive != myActivePartIndex) && (aOldActive.isValid()))
1599         aTreeView->setExpanded(aOldActive, false);
1600
1601       aLabel->setPalette(aPalet);
1602     }
1603     aWorkshop->updateCommandStatus();
1604
1605     // Update displayed objects in order to update active color
1606     XGUI_Displayer* aDisplayer = aWorkshop->displayer();
1607     QObjectPtrList aObjects = aDisplayer->displayedObjects();
1608     bool aHidden;
1609     foreach(ObjectPtr aObj, aObjects) {
1610       aHidden = !aObj->data() || !aObj->data()->isValid() ||
1611         aObj->isDisabled() || (!aObj->isDisplayed());
1612       if (!aHidden) {
1613         aDisplayer->redisplay(aObj, false);
1614       }
1615     }
1616     aDisplayer->updateViewer();
1617     // Update tree items if they are expanded
1618     if (needUpdate) {
1619       aTreeView->viewport()->update(aTreeView->viewport()->rect());
1620     }
1621   } else if (theMessage->eventID() == Events_Loop::loop()->eventByName(EVENT_OBJECT_CREATED)) {
1622     std::shared_ptr<ModelAPI_ObjectUpdatedMessage> aUpdMsg =
1623         std::dynamic_pointer_cast<ModelAPI_ObjectUpdatedMessage>(theMessage);
1624     std::set<ObjectPtr> aObjects = aUpdMsg->objects();
1625
1626     ObjectPtr aConstrObj;
1627     ObjectPtr aResultObj;
1628     std::set<ObjectPtr>::const_iterator aIt;
1629     DocumentPtr aRootDoc = ModelAPI_Session::get()->moduleDocument();
1630     for (aIt = aObjects.begin(); aIt != aObjects.end(); ++aIt) {
1631       ObjectPtr aObject = (*aIt);
1632       if ((!aResultObj.get()) && (aObject->groupName() == ModelAPI_ResultBody::group())
1633           && (aObject->document() != aRootDoc))
1634         aResultObj = aObject;
1635       if ((!aConstrObj.get()) && (aObject->groupName() == ModelAPI_ResultConstruction::group())
1636           && (aObject->document() != aRootDoc))
1637         aConstrObj = aObject;
1638       if (aResultObj.get() && aConstrObj.get())
1639         break;
1640     }
1641
1642     if (aResultObj.get() || aConstrObj.get()) {
1643       XGUI_Workshop* aWorkshop = getWorkshop();
1644       XGUI_DataTree* aTreeView = aWorkshop->objectBrowser()->treeView();
1645       XGUI_DataModel* aDataModel = aWorkshop->objectBrowser()->dataModel();
1646
1647       if (aResultObj.get()) {
1648         EXPAND_PARENT(aResultObj)
1649       }
1650       if (aConstrObj.get()) {
1651         EXPAND_PARENT(aConstrObj)
1652       }
1653     }
1654   }
1655   else if (theMessage->eventID() == Events_Loop::loop()->eventByName(EVENT_OBJECT_TO_REDISPLAY)) {
1656     CompositeFeaturePtr aSketch = mySketchMgr->activeSketch();
1657     if (aSketch.get()) {
1658       ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
1659       if (PartSet_SketcherMgr::isSketchOperation(anOperation) && mySketchMgr->previewSketchPlane()->isDisplayed())
1660         mySketchMgr->previewSketchPlane()->createSketchPlane(aSketch, myWorkshop);
1661     }
1662   }
1663 }
1664
1665 //******************************************************
1666 void PartSet_Module::onTreeViewDoubleClick(const QModelIndex& theIndex)
1667 {
1668   if (myWorkshop->currentOperation()) // Do not change activation of parts if an operation active
1669     return;
1670   SessionPtr aMgr = ModelAPI_Session::get();
1671   if (!theIndex.isValid()) {
1672     // It seems that this code is obsolete
1673     //aMgr->setActiveDocument(aMgr->moduleDocument());
1674     return;
1675   }
1676   if (theIndex.column() != 1) // Use only first column
1677     return;
1678
1679   XGUI_Workshop* aWorkshop = getWorkshop();
1680   XGUI_DataModel* aDataModel = aWorkshop->objectBrowser()->dataModel();
1681   // De not use non editable Indexes
1682   if ((aDataModel->flags(theIndex) & Qt::ItemIsSelectable) == 0)
1683     return;
1684   ObjectPtr aObj = aDataModel->object(theIndex);
1685
1686   ResultPartPtr aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aObj);
1687   if (!aPart.get()) { // Probably this is Feature
1688     FeaturePtr aPartFeature = std::dynamic_pointer_cast<ModelAPI_Feature>(aObj);
1689     if (aPartFeature.get() && (aPartFeature->getKind() == PartSetPlugin_Part::ID())) {
1690       aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aPartFeature->firstResult());
1691     }
1692   }
1693   if (aPart.get()) { // if this is a part
1694     if (aPart->partDoc() == aMgr->activeDocument()) {
1695       myMenuMgr->activatePartSet();
1696     } else {
1697       myMenuMgr->activatePart(aPart);
1698     }
1699   }
1700 }
1701
1702 //******************************************************
1703 void PartSet_Module::onViewCreated(ModuleBase_IViewWindow*)
1704 {
1705   // z layer is created for all started operations in order to visualize operation AIS presentation
1706   // over the object
1707   Handle(AIS_InteractiveContext) aContext = myWorkshop->viewer()->AISContext();
1708   if (aContext.IsNull())
1709     return;
1710
1711   Handle(V3d_Viewer) aViewer = aContext->CurrentViewer();
1712   if (myVisualLayerId == 0) {
1713     if (myVisualLayerId == 0)
1714       aViewer->AddZLayer(myVisualLayerId);
1715   } else {
1716     TColStd_SequenceOfInteger aZList;
1717     aViewer->GetAllZLayers(aZList);
1718     bool aFound = false;
1719     for (int i = 1; i <= aZList.Length(); i++) {
1720       if (aZList(i) == myVisualLayerId) {
1721         aFound = true;
1722         break;
1723       }
1724     }
1725     if (!aFound)
1726       aViewer->AddZLayer(myVisualLayerId);
1727   }
1728   // if there is an active operation with validated widget,
1729   // the filters of this widget should be activated in the created view
1730   myWorkshop->selectionActivate()->updateSelectionFilters();
1731   myWorkshop->selectionActivate()->updateSelectionModes();
1732 }
1733
1734 //******************************************************
1735 void PartSet_Module::widgetStateChanged(int thePreviousState)
1736 {
1737   mySketchMgr->widgetStateChanged(thePreviousState);
1738 }
1739
1740 //******************************************************
1741 bool PartSet_Module::processEnter(const std::string& thePreviousAttributeID)
1742 {
1743   return mySketchReentrantMgr->processEnter(thePreviousAttributeID);
1744 }
1745
1746 //******************************************************
1747 void PartSet_Module::beforeOperationStopped(ModuleBase_Operation* theOperation)
1748 {
1749   if (PartSet_SketcherMgr::isSketchOperation(theOperation)) {
1750     mySketchMgr->stopSketch(theOperation);
1751   }
1752 }
1753
1754 //******************************************************
1755 GeomShapePtr PartSet_Module::findShape(const AttributePtr& theAttribute)
1756 {
1757   GeomShapePtr aGeomShape;
1758
1759   ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
1760   if (anOperation && sketchMgr()->isNestedSketchOperation(anOperation)) {
1761     aGeomShape = PartSet_Tools::findShapeBy2DPoint(theAttribute, myWorkshop);
1762   }
1763   return aGeomShape;
1764 }
1765
1766 //******************************************************
1767 AttributePtr PartSet_Module::findAttribute(const ObjectPtr& theObject,
1768                                            const GeomShapePtr& theGeomShape)
1769 {
1770   AttributePtr anAttribute;
1771   GeomShapePtr aGeomShape = theGeomShape;
1772   if (!aGeomShape.get()) {
1773     // processing shape of result, e.g. sketch circle center is selected, this is a result
1774     // the geom shape is empty, the shape of result should be used
1775     ResultPtr aResult = std::dynamic_pointer_cast<ModelAPI_Result>(theObject);
1776     if (aResult.get()) {
1777       aGeomShape = aResult->shape();
1778     }
1779   }
1780
1781   if (aGeomShape.get()) {
1782     TopoDS_Shape aTDSShape = aGeomShape->impl<TopoDS_Shape>();
1783     std::pair<AttributePtr, int> anAttrAndIndex =
1784         PartSet_Tools::findAttributeBy2dPoint(theObject, aTDSShape, mySketchMgr->activeSketch());
1785     return anAttrAndIndex.first;
1786   }
1787   return anAttribute;
1788 }
1789
1790 //******************************************************
1791 std::shared_ptr<Events_Message> PartSet_Module::reentrantMessage()
1792 {
1793   return sketchReentranceMgr()->reentrantMessage();
1794 }
1795
1796 //******************************************************
1797 void PartSet_Module::setReentrantPreSelection(const std::shared_ptr<Events_Message>& theMessage)
1798 {
1799   sketchReentranceMgr()->setReentrantPreSelection(theMessage);
1800 }
1801
1802 //******************************************************
1803 void PartSet_Module::onChoiceChanged(ModuleBase_ModelWidget* theWidget,
1804                                      int theIndex)
1805 {
1806   ModuleBase_WidgetChoice* aChoiceWidget = dynamic_cast<ModuleBase_WidgetChoice*>(theWidget);
1807   if (!aChoiceWidget)
1808     return;
1809
1810   QString aChoiceTitle = aChoiceWidget->getPropertyPanelTitle(theIndex);
1811   if (!aChoiceTitle.isEmpty()) {
1812     ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
1813     if (!aOperation)
1814       return;
1815     ModuleBase_IPropertyPanel* aPanel = aOperation->propertyPanel();
1816     if (aPanel)
1817       aPanel->setWindowTitle(aChoiceTitle);
1818   }
1819 }
1820
1821 //******************************************************
1822 XGUI_Workshop* PartSet_Module::getWorkshop() const
1823 {
1824   XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
1825   return aConnector->workshop();
1826 }
1827
1828 void PartSet_Module::setDefaultConstraintShown()
1829 {
1830   myHasConstraintShown[PartSet_Tools::Geometrical] = true;
1831   myHasConstraintShown[PartSet_Tools::Dimensional] = true;
1832   myHasConstraintShown[PartSet_Tools::Expressions] = false;
1833 }
1834
1835 //******************************************************
1836 ModuleBase_ITreeNode* PartSet_Module::rootNode() const
1837 {
1838   return myRoot;
1839 }
1840
1841 //******************************************************
1842 void PartSet_Module::disableCustomMode(ModuleBase_CustomizeFlag theMode) {
1843   myCustomPrs->disableCustomMode(theMode);
1844 }
1845
1846 //******************************************************
1847 void PartSet_Module::enableCustomModes() {
1848   myCustomPrs->enableCustomModes();
1849 }
1850
1851 //******************************************************
1852 void PartSet_Module::onConflictingConstraints()
1853 {
1854   const std::set<ObjectPtr>& aConstraints = myOverconstraintListener->conflictingObjects();
1855   QObjectPtrList aObjectsList;
1856   std::set<ObjectPtr>::const_iterator aIt;
1857   for (aIt = aConstraints.cbegin(); aIt != aConstraints.cend(); aIt++) {
1858     if (mySketchReentrantMgr->isLastAutoConstraint(*aIt))
1859       aObjectsList.append(*aIt);
1860   }
1861   if (aObjectsList.size() > 0) {
1862     XGUI_Workshop* aWorkshop = getWorkshop();
1863     QString aDescription = aWorkshop->contextMenuMgr()->action("DELETE_CMD")->text();
1864     ModuleBase_Operation* anOpAction = new ModuleBase_Operation(aDescription);
1865     XGUI_OperationMgr* anOpMgr = aWorkshop->operationMgr();
1866
1867     ModuleBase_Operation* anOp = anOpMgr->currentOperation();
1868     if (sketchMgr()->isNestedSketchOperation(anOp))
1869       anOp->abort();
1870
1871     anOpMgr->startOperation(anOpAction);
1872     aWorkshop->deleteFeatures(aObjectsList);
1873     anOpMgr->commitOperation();
1874     ModuleBase_Tools::flushUpdated(sketchMgr()->activeSketch());
1875   }
1876 }