1 // Copyright (C) 2014-2020 CEA/DEN, EDF R&D
3 // This library is free software; you can redistribute it and/or
4 // modify it under the terms of the GNU Lesser General Public
5 // License as published by the Free Software Foundation; either
6 // version 2.1 of the License, or (at your option) any later version.
8 // This library is distributed in the hope that it will be useful,
9 // but WITHOUT ANY WARRANTY; without even the implied warranty of
10 // MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
11 // Lesser General Public License for more details.
13 // You should have received a copy of the GNU Lesser General Public
14 // License along with this library; if not, write to the Free Software
15 // Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
17 // See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
20 #include "PartSet_Module.h"
21 #include "PartSet_WidgetSketchLabel.h"
22 #include "PartSet_Validators.h"
23 #include "PartSet_Tools.h"
24 #include "PartSet_PreviewPlanes.h"
25 #include "PartSet_WidgetBSplinePoints.h"
26 #include "PartSet_WidgetPoint2d.h"
27 #include "PartSet_WidgetPoint2DFlyout.h"
28 #include "PartSet_WidgetShapeSelector.h"
29 #include "PartSet_WidgetMultiSelector.h"
30 #include "PartSet_WidgetFeaturePointSelector.h"
31 #include "PartSet_WidgetEditor.h"
32 #include "PartSet_WidgetFileSelector.h"
33 #include "PartSet_WidgetSketchCreator.h"
34 #include "PartSet_SketcherMgr.h"
35 #include "PartSet_SketcherReentrantMgr.h"
36 #include "PartSet_ResultSketchPrs.h"
37 #include "PartSet_MenuMgr.h"
38 #include "PartSet_CustomPrs.h"
39 #include "PartSet_IconFactory.h"
40 #include "PartSet_OverconstraintListener.h"
41 #include "PartSet_TreeNodes.h"
42 #include "PartSet_FieldStepPrs.h"
43 #include "PartSet_BSplineWidget.h"
45 #include "PartSet_Filters.h"
46 #include "PartSet_FilterInfinite.h"
52 #include <PartSetPlugin_Remove.h>
53 #include <PartSetPlugin_Part.h>
54 #include <PartSetPlugin_Duplicate.h>
56 #include <SketchPlugin_ConstraintCoincidence.h>
58 #include <ModuleBase_Operation.h>
59 #include <ModuleBase_IViewer.h>
60 #include <ModuleBase_IViewWindow.h>
61 #include <ModuleBase_IPropertyPanel.h>
62 #include <ModuleBase_ISelectionActivate.h>
63 #include <ModuleBase_WidgetChoice.h>
64 #include <ModuleBase_WidgetEditor.h>
65 #include <ModuleBase_WidgetValidated.h>
66 #include <ModuleBase_Tools.h>
67 #include <ModuleBase_OperationFeature.h>
68 #include <ModuleBase_WidgetFactory.h>
69 #include <ModuleBase_OperationDescription.h>
70 #include <ModuleBase_ViewerPrs.h>
71 #include <ModuleBase_ResultPrs.h>
73 #include <ModelAPI_ResultField.h>
74 #include <ModelAPI_Object.h>
75 #include <ModelAPI_Events.h>
76 #include <ModelAPI_Validator.h>
77 #include <ModelAPI_Data.h>
78 #include <ModelAPI_Session.h>
79 #include <ModelAPI_ResultBody.h>
80 #include <ModelAPI_AttributeString.h>
81 #include <ModelAPI_AttributeSelectionList.h>
82 #include <ModelAPI_Tools.h>
83 #include <ModelAPI_ResultConstruction.h>
84 #include <ModelAPI_AttributeIntArray.h>
85 #include <ModelAPI_ResultGroup.h>
87 #include <GeomDataAPI_Point2D.h>
88 #include <GeomDataAPI_Point.h>
89 #include <GeomDataAPI_Dir.h>
91 #include <XGUI_ActiveControlMgr.h>
92 #include <XGUI_ActiveControlSelector.h>
93 #include <XGUI_ActionsMgr.h>
94 #include <XGUI_ContextMenuMgr.h>
95 #include <XGUI_DataModel.h>
96 #include <XGUI_Displayer.h>
97 #include <XGUI_ErrorMgr.h>
98 #include <XGUI_FacesPanelSelector.h>
99 #include <XGUI_ModuleConnector.h>
100 #include <XGUI_ObjectsBrowser.h>
101 #include <XGUI_OperationMgr.h>
102 #include <XGUI_PropertyPanel.h>
103 #include <XGUI_SelectionMgr.h>
104 #include <XGUI_Tools.h>
105 #include <XGUI_Workshop.h>
107 #include <SketchPlugin_ConstraintAngle.h>
108 #include <SketchPlugin_ConstraintLength.h>
109 #include <SketchPlugin_ConstraintDistance.h>
110 #include <SketchPlugin_ConstraintParallel.h>
111 #include <SketchPlugin_ConstraintPerpendicular.h>
112 #include <SketchPlugin_ConstraintRadius.h>
113 #include <SketchPlugin_Feature.h>
114 #include <SketchPlugin_Projection.h>
115 #include <SketchPlugin_Sketch.h>
117 #include <SketcherPrs_SymbolPrs.h>
118 #include <SketcherPrs_PositionMgr.h>
119 #include <SketcherPrs_Coincident.h>
120 #include <SketcherPrs_Tools.h>
122 #include <Events_Loop.h>
123 #include <Config_PropManager.h>
124 #include <Config_Keywords.h>
126 #include <AIS_Dimension.hxx>
127 #include <AIS_InteractiveObject.hxx>
128 #include <StdSelect_TypeOfFace.hxx>
129 #include <TopoDS_Vertex.hxx>
130 #include <TopoDS.hxx>
131 #include <TopoDS_Shape.hxx>
132 #include <BRep_Tool.hxx>
135 #include <QMouseEvent>
138 #include <QApplication>
139 #include <QMessageBox>
140 #include <QMainWindow>
144 #include <GeomAlgoAPI_FaceBuilder.h>
145 #include <GeomDataAPI_Dir.h>
147 #include <SelectMgr_ListIteratorOfListOfFilter.hxx>
149 #define FEATURE_ITEM_COLOR "0,0,225"
152 /*!Create and return new instance of XGUI_Module*/
153 extern "C" PARTSET_EXPORT ModuleBase_IModule* createModule(ModuleBase_IWorkshop* theWshop)
155 return new PartSet_Module(theWshop);
158 //******************************************************
159 PartSet_Module::PartSet_Module(ModuleBase_IWorkshop* theWshop)
160 : ModuleBase_IModule(theWshop),
161 myIsOperationIsLaunched(false),
165 new PartSet_IconFactory(this);
167 mySketchMgr = new PartSet_SketcherMgr(this);
168 mySketchReentrantMgr = new PartSet_SketcherReentrantMgr(theWshop);
170 ModuleBase_IViewer* aViewer = theWshop->viewer();
171 connect(aViewer, SIGNAL(keyRelease(ModuleBase_IViewWindow*, QKeyEvent*)),
172 this, SLOT(onKeyRelease(ModuleBase_IViewWindow*, QKeyEvent*)));
173 connect(aViewer, SIGNAL(viewTransformed(int)),
174 SLOT(onViewTransformed(int)));
175 connect(aViewer, SIGNAL(viewCreated(ModuleBase_IViewWindow*)),
176 SLOT(onViewCreated(ModuleBase_IViewWindow*)));
177 myMenuMgr = new PartSet_MenuMgr(this);
178 myCustomPrs = new PartSet_CustomPrs(theWshop);
180 myOverconstraintListener = new PartSet_OverconstraintListener(theWshop);
182 Events_Loop* aLoop = Events_Loop::loop();
183 aLoop->registerListener(this, Events_Loop::eventByName(EVENT_DOCUMENT_CHANGED));
184 aLoop->registerListener(this, Events_Loop::eventByName(EVENT_OBJECT_TO_REDISPLAY));
186 registerSelectionFilter(SF_GlobalFilter, new PartSet_GlobalFilter(myWorkshop));
187 registerSelectionFilter(SF_FilterInfinite, new PartSet_FilterInfinite(myWorkshop));
188 Handle(PartSet_ResultGroupNameFilter) aCRFilter = new PartSet_ResultGroupNameFilter(myWorkshop);
189 std::set<std::string> aCRGroupNames;
190 aCRGroupNames.insert(ModelAPI_ResultConstruction::group());
191 aCRFilter->setGroupNames(aCRGroupNames);
192 registerSelectionFilter(SF_ResultGroupNameFilter, aCRFilter);
194 setDefaultConstraintShown();
196 //Config_PropManager::registerProp("Visualization", "object_default_color", "Object color",
197 // Config_Prop::Color, "225,225,225");
199 Config_PropManager::registerProp("Visualization", "result_body_color", "Result color",
200 Config_Prop::Color, ModelAPI_ResultBody::DEFAULT_COLOR());
202 Config_PropManager::registerProp("Visualization", "result_group_color", "Group color",
203 Config_Prop::Color, ModelAPI_ResultGroup::DEFAULT_COLOR());
205 Config_PropManager::registerProp("Visualization", "result_construction_color",
206 "Construction color",
208 ModelAPI_ResultConstruction::DEFAULT_COLOR());
210 Config_PropManager::registerProp("Visualization", "result_part_color", "Part color",
211 Config_Prop::Color, ModelAPI_ResultPart::DEFAULT_COLOR());
213 Config_PropManager::registerProp("Visualization", "result_field_color", "Field color",
214 Config_Prop::Color, ModelAPI_ResultField::DEFAULT_COLOR());
216 Config_PropManager::registerProp("Visualization", "operation_parameter_color",
217 "Reference shape wireframe color in operation", Config_Prop::Color,
218 PartSet_CustomPrs::OPERATION_PARAMETER_COLOR());
219 Config_PropManager::registerProp("Visualization", "operation_result_color",
220 "Result shape wireframe color in operation", Config_Prop::Color,
221 PartSet_CustomPrs::OPERATION_RESULT_COLOR());
222 Config_PropManager::registerProp("Visualization", "operation_highlight_color",
223 "Multi selector item color in operation", Config_Prop::Color,
224 PartSet_CustomPrs::OPERATION_HIGHLIGHT_COLOR());
225 Config_PropManager::registerProp("Visualization", "operation_remove_feature_color",
226 "Color of removed feature in operation", Config_Prop::Color,
227 PartSet_CustomPrs::OPERATION_REMOVE_FEATURE_COLOR());
228 Config_PropManager::registerProp("Visualization", "sketch_preview_plane",
229 "Color of sketch plane", Config_Prop::Color,
230 PartSet_CustomPrs::OPERATION_SKETCH_PLANE());
232 Config_PropManager::registerProp("Visualization", "hidden_face_transparency",
233 "Hidden faces transparency",
234 Config_Prop::DblSpin,
236 std::ostringstream aStream;
237 aStream << SketcherPrs_Tools::getDefaultArrowSize();
238 Config_PropManager::registerProp("Visualization", "dimension_arrow_size",
239 "Dimension arrow size", Config_Prop::IntSpin, aStream.str());
241 Config_PropManager::registerProp("Visualization", "dimension_font", "Dimension font",
242 Config_Prop::String, "Times-bold");
246 aStream << SketcherPrs_Tools::getDefaultTextHeight();
247 Config_PropManager::registerProp("Visualization", "dimension_value_size",
248 "Dimension value size", Config_Prop::IntSpin, aStream.str());
250 Config_PropManager::registerProp("Visualization", "sketch_dimension_color",
252 Config_Prop::Color, SKETCH_DIMENSION_COLOR);
254 Config_PropManager::registerProp("Visualization", "feature_objectbrowser_color",
255 "Feature items in Object Browser",
256 Config_Prop::Color, FEATURE_ITEM_COLOR);
258 Config_PropManager::registerProp("Shortcuts", "add_parameter_shortcut",
259 "Add parameter in parameters manager dialog",
260 Config_Prop::Shortcut, "Ctrl+A");
262 Config_PropManager::registerProp("Windows", "use_hide_faces_panel",
263 "Use HideFaces panel in operations", Config_Prop::Boolean, "false");
266 //******************************************************
267 PartSet_Module::~PartSet_Module()
270 delete myOverconstraintListener;
274 //******************************************************
275 void PartSet_Module::createFeatures()
277 ModuleBase_IModule::createFeatures();
278 myRoot = new PartSet_RootNode();
279 myRoot->setWorkshop(workshop());
283 //******************************************************
284 void PartSet_Module::storeSelection()
286 // cash is used only to restore selection, so it should be filled in storeSelection and
287 // after applying immediatelly cleared in restoreSelection
288 myCurrentSelection.clear();
289 sketchMgr()->storeSelection(PartSet_SketcherMgr::ST_SelectType, myCurrentSelection);
292 //******************************************************
293 void PartSet_Module::restoreSelection()
295 // cash is used only to restore selection, so it should be filled in storeSelection and
296 // after applying immediatelly cleared in restoreSelection
297 sketchMgr()->restoreSelection(myCurrentSelection);
298 myCurrentSelection.clear();
301 //******************************************************
302 void PartSet_Module::registerValidators()
304 //Registering of validators
305 SessionPtr aMgr = ModelAPI_Session::get();
306 ModelAPI_ValidatorsFactory* aFactory = aMgr->validators();
307 aFactory->registerValidator("PartSet_DistanceSelection", new PartSet_DistanceSelection);
308 aFactory->registerValidator("PartSet_LengthSelection", new PartSet_LengthSelection);
309 aFactory->registerValidator("PartSet_PerpendicularSelection", new PartSet_PerpendicularSelection);
310 aFactory->registerValidator("PartSet_ParallelSelection", new PartSet_ParallelSelection);
311 aFactory->registerValidator("PartSet_RadiusSelection", new PartSet_RadiusSelection);
312 aFactory->registerValidator("PartSet_RigidSelection", new PartSet_RigidSelection);
313 aFactory->registerValidator("PartSet_CoincidentSelection", new PartSet_CoincidentSelection);
314 aFactory->registerValidator("PartSet_HVDirSelection", new PartSet_HVDirSelection);
315 aFactory->registerValidator("PartSet_TangentSelection", new PartSet_TangentSelection);
316 aFactory->registerValidator("PartSet_FilletSelection", new PartSet_FilletSelection);
317 aFactory->registerValidator("PartSet_AngleSelection", new PartSet_AngleSelection);
318 aFactory->registerValidator("PartSet_EqualSelection", new PartSet_EqualSelection);
319 aFactory->registerValidator("PartSet_CollinearSelection", new PartSet_CollinearSelection);
320 aFactory->registerValidator("PartSet_MiddlePointSelection", new PartSet_MiddlePointSelection);
321 aFactory->registerValidator("PartSet_DifferentObjects", new PartSet_DifferentObjectsValidator);
322 aFactory->registerValidator("PartSet_DifferentPoints", new PartSet_DifferentPointsValidator);
323 aFactory->registerValidator("PartSet_CoincidentAttr", new PartSet_CoincidentAttr);
324 aFactory->registerValidator("PartSet_MultyTranslationSelection",
325 new PartSet_MultyTranslationSelection);
326 aFactory->registerValidator("PartSet_SplitSelection", new PartSet_SplitSelection);
327 aFactory->registerValidator("PartSet_ProjectionSelection", new PartSet_ProjectionSelection);
328 aFactory->registerValidator("PartSet_IntersectionSelection", new PartSet_IntersectionSelection);
331 //******************************************************
332 void PartSet_Module::connectToPropertyPanel(ModuleBase_ModelWidget* theWidget,
333 const bool isToConnect)
335 mySketchMgr->connectToPropertyPanel(theWidget, isToConnect);
338 //******************************************************
339 void PartSet_Module::operationCommitted(ModuleBase_Operation* theOperation)
341 if (sketchMgr()->isNestedSketchOperation(theOperation)) {
342 mySketchMgr->commitNestedSketch(theOperation);
344 /// deactivate of overconstraint listener should be performed after Sketch commit (#2176)
345 if (PartSet_SketcherMgr::isSketchOperation(theOperation))
346 overconstraintListener()->setActive(false);
348 /// Restart sketcher operations automatically
349 if (!mySketchReentrantMgr->operationCommitted(theOperation)) {
350 getWorkshop()->selector()->clearSelection();
354 //******************************************************
355 void PartSet_Module::operationAborted(ModuleBase_Operation* theOperation)
357 /// Restart sketcher operations automatically
358 mySketchReentrantMgr->operationAborted(theOperation);
359 /// deactivate of overconstraint listener should be performed after Sketch abort (#2176)
360 if (PartSet_SketcherMgr::isSketchOperation(theOperation))
361 overconstraintListener()->setActive(false);
363 getWorkshop()->selector()->clearSelection();
366 //******************************************************
367 void PartSet_Module::operationStarted(ModuleBase_Operation* theOperation)
369 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>
372 XGUI_Workshop* aWorkshop = XGUI_Tools::workshop(workshop());
373 XGUI_PropertyPanel* aPropertyPanel = aWorkshop->propertyPanel();
375 ModuleBase_ModelWidget* aFilledWidget = 0;
376 bool aPostonedWidgetActivation = false;
378 FeaturePtr aFeature = aFOperation->feature();
379 /// Restart sketcher operations automatically
380 /// it is important to call method of sketch reentrant manager before filling of PP
381 /// because it fills some created feature attributes, these new values should be used
382 /// to fill the property panel
383 mySketchReentrantMgr->operationStarted(theOperation);
385 aWorkshop->fillPropertyPanel(aFOperation);
386 // filling the operation values by the current selection
387 // if the operation can be committed after the controls filling, the method perform should
388 // be stopped. Otherwise unnecessary presentations can be shown(e.g. operation prs in sketch)
389 bool isOperationCommitted = false;
390 if (!aFOperation->isEditOperation()) {
391 std::string aGreedAttributeId = ModuleBase_Tools::findGreedAttribute(workshop(), aFeature);
392 // if there is a greed attribute, automatic commit by preselection
393 // for this feature is prohibited
394 aFilledWidget = aFOperation->activateByPreselection(aGreedAttributeId);
395 if (currentOperation() != aFOperation)
396 isOperationCommitted = true;
398 if (aGreedAttributeId.empty()) {
399 // a signal should be emitted before the next widget activation
400 // because, the activation of the next widget will give a focus to the widget.
401 // As a result the value of the widget is initialized.
402 // And commit may happens until the value is entered.
404 if (mySketchReentrantMgr->canBeCommittedByPreselection())
405 isOperationCommitted = mySketchMgr->operationActivatedByPreselection();
406 // activate the next obligatory widget
407 if (!isOperationCommitted)
408 aPropertyPanel->activateNextWidget(aFilledWidget);
411 else { // there is a greed widget
412 const QList<ModuleBase_ModelWidget*>& aWidgets = aPropertyPanel->modelWidgets();
413 std::string aFirstAttributeId = aWidgets.front()->attributeID();
414 // activate next widget after greeded if it is the first widget in the panel
415 // else the first panel widget is already activated by operation start
416 if (aFirstAttributeId == aGreedAttributeId)
417 aPostonedWidgetActivation = true;
420 } if (!isOperationCommitted) {
421 aWorkshop->connectToPropertyPanel(true);
422 updateSketcherOnStart(aFOperation);
423 updatePresentationsOnStart(aFOperation);
425 // the objects of the current operation should be deactivated
426 QObjectPtrList anObjects;
427 anObjects.append(aFeature);
428 std::list<ResultPtr> aResults;
429 ModelAPI_Tools::allResults(aFeature, aResults);
430 std::list<ResultPtr>::const_iterator aIt;
431 for (aIt = aResults.begin(); aIt != aResults.end(); ++aIt) {
432 anObjects.append(*aIt);
434 QObjectPtrList::const_iterator anIt = anObjects.begin(), aLast = anObjects.end();
435 for (; anIt != aLast; anIt++)
436 aWorkshop->deactivateActiveObject(*anIt, false);
437 if (anObjects.size() > 0) {
438 XGUI_Displayer* aDisplayer = aWorkshop->displayer();
439 aDisplayer->updateViewer();
441 /// state of command actions should be updated after displayed objects modification because
442 /// deactivation(for example) of objects may influence on selection in the viewer
443 /// State of command actions may depend on selection in the viewer(e.g. Sketch)
444 workshop()->updateCommandStatus();
446 if (aPostonedWidgetActivation) {
447 // if the widget is an empty in the chain of activated widgets, the current operation
448 // is restarted. It should be performed after functionality of the operation starting
449 aPropertyPanel->activateNextWidget(aFilledWidget);
454 //******************************************************
455 void PartSet_Module::updateSketcherOnStart(ModuleBase_Operation* theOperation)
457 if (PartSet_SketcherMgr::isSketchOperation(theOperation)) {
458 mySketchMgr->startSketch(theOperation);
460 // It is switched off because of
461 // Task #3067: 5.2.2 Drawing in the sketcher: change the mouse cursor arrow
462 else if (sketchMgr()->isNestedSketchOperation(theOperation)) {
463 mySketchMgr->startNestedSketch(theOperation);
467 //******************************************************
468 void PartSet_Module::updatePresentationsOnStart(ModuleBase_Operation* theOperation)
470 ModuleBase_OperationFeature* aFOperation =
471 dynamic_cast<ModuleBase_OperationFeature*>(theOperation);
473 myCustomPrs->activate(aFOperation->feature(), ModuleBase_IModule::CustomizeArguments, false);
474 myCustomPrs->activate(aFOperation->feature(), ModuleBase_IModule::CustomizeResults, false);
478 //******************************************************
479 void PartSet_Module::operationResumed(ModuleBase_Operation* theOperation)
481 ModuleBase_IModule::operationResumed(theOperation);
483 ModuleBase_OperationFeature* aFOperation =
484 dynamic_cast<ModuleBase_OperationFeature*>(theOperation);
486 myCustomPrs->activate(aFOperation->feature(), ModuleBase_IModule::CustomizeArguments, false);
487 myCustomPrs->activate(aFOperation->feature(), ModuleBase_IModule::CustomizeResults, false);
491 //******************************************************
492 void PartSet_Module::operationStopped(ModuleBase_Operation* theOperation)
494 bool isModifiedArgs = myCustomPrs->deactivate(ModuleBase_IModule::CustomizeArguments, false);
495 bool isModifiedResults = myCustomPrs->deactivate(ModuleBase_IModule::CustomizeResults, false);
496 bool isModified = isModifiedArgs || isModifiedResults;
498 if (sketchMgr()->isNestedSketchOperation(theOperation)) {
499 mySketchMgr->stopNestedSketch(theOperation);
501 else if (PartSet_SketcherMgr::isSketchOperation(theOperation))
502 setDefaultConstraintShown();
504 //VSV: Viewer is updated on feature update and redisplay
506 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(myWorkshop);
507 XGUI_Displayer* aDisplayer = aConnector->workshop()->displayer();
508 aDisplayer->updateViewer();
511 QMap<PartSet_Tools::ConstraintVisibleState, bool>::const_iterator
512 anIt = myHasConstraintShown.begin(), aLast = myHasConstraintShown.end();
513 for (; anIt != aLast; anIt++) {
514 mySketchMgr->updateBySketchParameters(anIt.key(), anIt.value());
518 //******************************************************
519 ModuleBase_Operation* PartSet_Module::currentOperation() const
521 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
522 XGUI_OperationMgr* anOpMgr = aConnector->workshop()->operationMgr();
523 return anOpMgr->currentOperation();
526 //******************************************************
527 bool PartSet_Module::canUndo() const
529 bool aCanUndo = false;
530 SessionPtr aMgr = ModelAPI_Session::get();
531 if (aMgr->hasModuleDocument() && aMgr->canUndo()) {
532 aCanUndo = !aMgr->isOperation();
533 if (!aCanUndo) // check the enable state additionally by sketch manager
534 aCanUndo = aMgr->canUndo();
539 //******************************************************
540 bool PartSet_Module::canRedo() const
542 bool aCanRedo = false;
543 SessionPtr aMgr = ModelAPI_Session::get();
544 if (aMgr->hasModuleDocument() && aMgr->canRedo()) {
545 aCanRedo = !aMgr->isOperation();
546 if (!aCanRedo) // check the enable state additionally by sketch manager
547 aCanRedo = aMgr->canRedo();
552 //******************************************************
553 bool PartSet_Module::canApplyAction(const ObjectPtr& theObject, const QString& theActionId) const
556 if (theActionId == "MOVE_CMD" || theActionId == "MOVE_SPLIT_CMD") {
557 FeaturePtr aFeature = ModelAPI_Feature::feature(theObject);
559 ResultPtr aResult = ModuleBase_Tools::firstResult(aFeature);
560 // part features can not be moved in the history.
561 if (aResult.get() && aResult->groupName() == ModelAPI_ResultPart::group())
568 //******************************************************
569 bool PartSet_Module::canEraseObject(const ObjectPtr& theObject) const
571 // the sketch manager put the restriction to the objects erase
572 return mySketchMgr->canEraseObject(theObject);
575 //******************************************************
576 bool PartSet_Module::canDisplayObject(const ObjectPtr& theObject) const
578 // the sketch manager put the restriction to the objects display
579 return mySketchMgr->canDisplayObject(theObject);
582 //******************************************************
583 bool PartSet_Module::canUsePreselection(const QString& thePreviousOperationKind,
584 const QString& theStartedOperationKind)
586 if (ModuleBase_IModule::canUsePreselection(thePreviousOperationKind, theStartedOperationKind))
589 return mySketchMgr->isNestedSketchFeature(theStartedOperationKind);
592 /*void PartSet_Module::processHiddenObject(const std::list<ObjectPtr>& theObjects)
594 mySketchMgr->processHiddenObject(theObjects);
597 //******************************************************
598 bool PartSet_Module::canActivateSelection(const ObjectPtr& theObject) const
600 bool aCanActivate = ModuleBase_IModule::canActivateSelection(theObject);
602 ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
603 bool isSketchOp = PartSet_SketcherMgr::isSketchOperation(anOperation),
604 isNestedOp = sketchMgr()->isNestedSketchOperation(anOperation);
605 if (isSketchOp || isNestedOp) {
606 // in active sketch operation it is possible to activate operation object in selection
607 // in the edit operation, e.g. points of the line can be moved when the line is edited
608 ModuleBase_OperationFeature* aFOperation =
609 dynamic_cast<ModuleBase_OperationFeature*>(anOperation);
610 aCanActivate = aCanActivate || (aFOperation && aFOperation->isEditOperation());
615 //******************************************************
616 bool PartSet_Module::addViewerMenu(const QMap<QString, QAction*>& theStdActions,
618 QMap<int, QAction*>& theMenuActions) const
620 return myMenuMgr->addViewerMenu(theStdActions, theParent, theMenuActions);
623 //******************************************************
624 void PartSet_Module::updateViewerMenu(const QMap<QString, QAction*>& theStdActions)
626 myMenuMgr->updateViewerMenu(theStdActions);
629 //******************************************************
630 bool PartSet_Module::isActionEnableStateFixed(const int theActionId) const
632 bool isEnabledFixed = false;
633 if (theActionId == XGUI_ActionsMgr::AcceptAll &&
634 mySketchReentrantMgr->isInternalEditActive())
635 isEnabledFixed = true;
636 return isEnabledFixed;
639 //******************************************************
640 QString PartSet_Module::getFeatureError(const FeaturePtr& theFeature)
642 QString anError = ModuleBase_IModule::getFeatureError(theFeature);
643 if (anError.isEmpty())
644 anError = sketchMgr()->getFeatureError(theFeature);
649 //******************************************************
650 void PartSet_Module::grantedOperationIds(ModuleBase_Operation* theOperation,
651 QStringList& theIds) const
653 myMenuMgr->grantedOperationIds(theOperation, theIds);
655 if (PartSet_SketcherMgr::isSketchOperation(theOperation)) {
656 XGUI_Workshop* aWorkshop = getWorkshop();
657 theIds.append(aWorkshop->contextMenuMgr()->action("DELETE_CMD")->text());
661 //******************************************************
662 void PartSet_Module::activeSelectionModes(QIntList& theModes)
664 if (mySketchMgr->activeSketch().get())
665 PartSet_SketcherMgr::sketchSelectionModes(mySketchMgr->activeSketch(), theModes);
667 theModes = XGUI_Tools::workshop(myWorkshop)->viewerSelectionModes();
670 //******************************************************
671 void PartSet_Module::moduleSelectionModes(int theModesType, QIntList& theModes)
673 customSubShapesSelectionModes(theModes);
674 //theModes.append(XGUI_Tools::workshop(myWorkshop)->viewerSelectionModes());
675 //myWorkshop->module()->activeSelectionModes(theModes);
678 //******************************************************
679 void PartSet_Module::moduleSelectionFilters(const QIntList& theFilterTypes,
680 SelectMgr_ListOfFilter& theSelectionFilters)
682 bool isSketchActive = mySketchMgr->activeSketch().get();
684 std::map<ModuleBase_SelectionFilterType, Handle(SelectMgr_Filter)>::const_iterator aFiltersIt =
685 mySelectionFilters.begin();
686 for (; aFiltersIt != mySelectionFilters.end(); aFiltersIt++) {
687 int aFilterType = aFiltersIt->first;
688 // do not add not participating filters in given parameters
689 if (!theFilterTypes.contains(aFilterType))
692 // using sketch filters only if sketch operation is active
693 if (!isSketchActive &&
694 mySketchMgr->sketchSelectionFilter((ModuleBase_SelectionFilterType)aFilterType))
697 // using filtering of construction results only from faces panel
698 if (aFilterType == SF_ResultGroupNameFilter)
701 theSelectionFilters.Append(aFiltersIt->second);
705 //******************************************************
706 void PartSet_Module::customSubShapesSelectionModes(QIntList& theModes)
708 if (theModes.contains(TopAbs_FACE))
709 theModes.append(SketcherPrs_Tools::Sel_Sketch_Face);
710 if (theModes.contains(TopAbs_WIRE))
711 theModes.append(SketcherPrs_Tools::Sel_Sketch_Wire);
713 if (mySketchMgr->activeSketch().get())
714 PartSet_SketcherMgr::sketchSelectionModes(mySketchMgr->activeSketch(), theModes);
717 //******************************************************
718 void PartSet_Module::getGeomSelection(const std::shared_ptr<ModuleBase_ViewerPrs>& theSelected,
719 ObjectPtr& theObject, AttributePtr& theAttribute)
721 ObjectPtr anObject = theSelected->object();
722 GeomShapePtr aShape = theSelected->shape();
724 theAttribute = findAttribute(anObject, aShape);
725 // TODO: try to create result if object is an external object
726 theObject = anObject;
729 //******************************************************
730 bool PartSet_Module::isMouseOverWindow()
732 return mySketchMgr->isMouseOverWindow();
735 //******************************************************
736 bool PartSet_Module::isSketchNeutralPointActivated() const
738 bool isNeutralPoint = true;
739 if (sketchReentranceMgr()->isInternalEditActive())
740 isNeutralPoint = false;
741 if (myIsOperationIsLaunched)
742 isNeutralPoint = false;
744 return isNeutralPoint;
747 //******************************************************
748 void PartSet_Module::closeDocument()
750 myActivePartIndex = QModelIndex();
751 SketcherPrs_PositionMgr::get()->clearAll();
754 //******************************************************
755 void PartSet_Module::clearViewer()
757 myCustomPrs->clearPrs();
759 XGUI_Workshop* aWorkshop = getWorkshop();
760 XGUI_Displayer* aDisplayer = aWorkshop->displayer();
761 aDisplayer->deactivateSelectionFilters(false);
764 //******************************************************
765 void PartSet_Module::propertyPanelDefined(ModuleBase_Operation* theOperation)
767 ModuleBase_OperationFeature* aFOperation =
768 dynamic_cast<ModuleBase_OperationFeature*>(theOperation);
772 ModuleBase_IPropertyPanel* aPanel = aFOperation->propertyPanel();
773 // we have to manually activate the sketch label in edit mode
774 if (PartSet_SketcherMgr::isSketchOperation(aFOperation) && (aFOperation->isEditOperation()))
775 aPanel->activateWidget(aPanel->modelWidgets().first());
778 //******************************************************
779 bool PartSet_Module::createWidgets(const FeaturePtr& theFeature, const QString& theXmlRepr,
780 QList<ModuleBase_ModelWidget*>& theWidgets) const
782 bool aProcessed = false;
784 XGUI_Workshop* aWorkshop = getWorkshop();
785 XGUI_PropertyPanel* aPropertyPanel = aWorkshop->propertyPanel();
786 if (mySketchMgr->activeSketch().get() && aPropertyPanel) {
787 ModuleBase_ISelection* aSelection = workshop()->selection();
788 // click on a point in sketch leads here with the point is highlighted, not yet selected
789 QList<ModuleBase_ViewerPrsPtr> aPreselection = aSelection->getHighlighted();
790 if (aPreselection.size() == 1) {
791 ModuleBase_ViewerPrsPtr aSelectedPrs = aPreselection[0];
792 ObjectPtr anObject = aSelectedPrs->object();
794 FeaturePtr aFeature = ModelAPI_Feature::feature(anObject);
795 GeomShapePtr aShape = aSelectedPrs->shape();
796 // click on the digit of dimension constrain comes here
797 // with an empty shape, so we need the check
798 if (aFeature == theFeature && aShape.get() && !aShape->isNull()) {
799 // if feature has only one result and shape of result is equal to selected shape
800 // this attribute is not processed. It is a case of Sketch Point.
801 if (aFeature->results().size() == 1) {
802 ResultPtr aResult = aFeature->results().front();
803 if (aResult.get() && aResult->shape()->isEqual(aShape))
806 const TopoDS_Shape& aTDShape = aShape->impl<TopoDS_Shape>();
807 std::pair<AttributePtr, int> anAttribute =
808 PartSet_Tools::findAttributeBy2dPoint(anObject, aTDShape, mySketchMgr->activeSketch());
809 if (anAttribute.first.get()) {
810 ModuleBase_WidgetFactory aFactory(theXmlRepr.toStdString(), workshop());
812 const std::string anAttributeId = anAttribute.first->id();
813 aFactory.createWidget(aPropertyPanel->contentWidget(), anAttributeId);
815 theWidgets = aFactory.getModelWidgets();
816 // it is possible that the point does not present in XML definition,
817 // in this case, we assume that it is not processed by this module
818 // e.g. "Intersection point" feature
819 aProcessed = !theWidgets.isEmpty();
827 //******************************************************
828 void PartSet_Module::onSelectionChanged()
830 ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
834 bool isSketcherOp = false;
835 // An edit operation is enable only if the current opeation is the sketch operation
836 if (mySketchMgr->activeSketch()) {
837 if (PartSet_Tools::sketchPlane(mySketchMgr->activeSketch()))
838 isSketcherOp = PartSet_SketcherMgr::isSketchOperation(aOperation);
841 // Editing of constraints can be done on selection
842 ModuleBase_ISelection* aSelect = myWorkshop->selection();
843 QList<ModuleBase_ViewerPrsPtr> aSelected = aSelect->getSelected();
844 if (aSelected.size() == 1) {
845 ModuleBase_ViewerPrsPtr aPrs = aSelected.first();
846 ObjectPtr aObject = aPrs->object();
847 FeaturePtr aFeature = ModelAPI_Feature::feature(aObject);
849 std::string aId = aFeature->getKind();
850 if ((aId == SketchPlugin_ConstraintRadius::ID()) ||
851 (aId == SketchPlugin_ConstraintLength::ID()) ||
852 (aId == SketchPlugin_ConstraintDistance::ID()) ||
853 (aId == SketchPlugin_ConstraintAngle::ID())) {
854 editFeature(aFeature);
861 //******************************************************
862 void PartSet_Module::onKeyRelease(ModuleBase_IViewWindow* theWnd, QKeyEvent* theEvent)
864 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
865 XGUI_OperationMgr* anOpMgr = aConnector->workshop()->operationMgr();
866 anOpMgr->onKeyReleased(theWnd->viewPort(), theEvent);
869 //******************************************************
870 ModuleBase_ModelWidget* PartSet_Module::createWidgetByType(const std::string& theType,
872 Config_WidgetAPI* theWidgetApi)
874 ModuleBase_IWorkshop* aWorkshop = workshop();
875 ModuleBase_ModelWidget* aWgt = NULL;
876 if (theType == "sketch-start-label") {
877 PartSet_WidgetSketchLabel* aLabelWgt = new PartSet_WidgetSketchLabel(theParent, aWorkshop,
878 theWidgetApi, myHasConstraintShown);
879 connect(aLabelWgt, SIGNAL(planeSelected(const std::shared_ptr<GeomAPI_Pln>&)),
880 mySketchMgr, SLOT(onPlaneSelected(const std::shared_ptr<GeomAPI_Pln>&)));
881 connect(aLabelWgt, SIGNAL(showConstraintToggled(int, bool)),
882 mySketchMgr, SLOT(onShowConstraintsToggle(int, bool)));
883 connect(aLabelWgt, SIGNAL(showFreePoints(bool)), mySketchMgr, SLOT(onShowPoints(bool)));
884 connect(aLabelWgt, SIGNAL(autoConstraints(bool)),
885 sketchReentranceMgr(), SLOT(onAutoConstraints(bool)));
886 aLabelWgt->setShowPointsState(mySketchMgr->isShowFreePointsShown());
888 } else if (theType == "sketch-2dpoint_selector") {
889 PartSet_WidgetPoint2D* aPointWgt = new PartSet_WidgetPoint2D(theParent, aWorkshop,
891 aPointWgt->setSketch(mySketchMgr->activeSketch());
892 connect(aPointWgt, SIGNAL(vertexSelected()), sketchReentranceMgr(), SLOT(onVertexSelected()));
894 }else if (theType == "sketch-2dpoint_flyout_selector") {
895 PartSet_WidgetPoint2DFlyout* aPointWgt = new PartSet_WidgetPoint2DFlyout(theParent, aWorkshop,
897 aPointWgt->setSketch(mySketchMgr->activeSketch());
898 connect(aPointWgt, SIGNAL(vertexSelected()), sketchReentranceMgr(), SLOT(onVertexSelected()));
900 } else if (theType == "sketch_shape_selector") {
901 PartSet_WidgetShapeSelector* aShapeSelectorWgt =
902 new PartSet_WidgetShapeSelector(theParent, aWorkshop, theWidgetApi);
903 aShapeSelectorWgt->setSketcher(mySketchMgr->activeSketch());
904 aWgt = aShapeSelectorWgt;
905 } else if (theType == "sketch_multi_selector") {
906 PartSet_WidgetMultiSelector* aShapeSelectorWgt =
907 new PartSet_WidgetMultiSelector(theParent, aWorkshop, theWidgetApi);
908 aShapeSelectorWgt->setSketcher(mySketchMgr->activeSketch());
909 aWgt = aShapeSelectorWgt;
911 else if (theType == "sketch_feature_point_selector") {
912 PartSet_WidgetFeaturePointSelector* aPointSelectorWgt =
913 new PartSet_WidgetFeaturePointSelector(theParent, aWorkshop, theWidgetApi);
914 aPointSelectorWgt->setSketcher(mySketchMgr->activeSketch());
915 aWgt = aPointSelectorWgt;
917 else if (theType == "sketch-bspline_selector") {
918 PartSet_WidgetBSplinePoints* aBSplineWgt =
919 new PartSet_WidgetBSplinePoints(theParent, aWorkshop, theWidgetApi);
920 aBSplineWgt->setSketch(mySketchMgr->activeSketch());
923 else if (theType == WDG_DOUBLEVALUE_EDITOR) {
924 aWgt = new PartSet_WidgetEditor(theParent, aWorkshop, theWidgetApi);
925 } else if (theType == "export_file_selector") {
926 aWgt = new PartSet_WidgetFileSelector(theParent, aWorkshop, theWidgetApi);
927 } else if (theType == "sketch_launcher") {
928 aWgt = new PartSet_WidgetSketchCreator(theParent, this, theWidgetApi);
930 else if (theType == "module_choice") {
931 aWgt = new ModuleBase_WidgetChoice(theParent, theWidgetApi);
932 connect(aWgt, SIGNAL(itemSelected(ModuleBase_ModelWidget*, int)),
933 this, SLOT(onChoiceChanged(ModuleBase_ModelWidget*, int)));
934 } else if (theType == "bspline-panel") {
935 PartSet_BSplineWidget* aPanel = new PartSet_BSplineWidget(theParent, theWidgetApi);
936 //aPanel->setFeature(theFeature);
942 //******************************************************
943 ModuleBase_ModelWidget* PartSet_Module::activeWidget() const
945 ModuleBase_ModelWidget* anActiveWidget = 0;
947 ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
949 return anActiveWidget;
951 ModuleBase_IPropertyPanel* aPanel = aOperation->propertyPanel();
953 return anActiveWidget;
955 return aPanel->activeWidget(true);
958 //******************************************************
959 bool PartSet_Module::deleteObjects()
961 bool isProcessed = false;
963 XGUI_Workshop* aWorkshop = getWorkshop();
964 XGUI_OperationMgr* anOpMgr = aWorkshop->operationMgr();
966 //SessionPtr aMgr = ModelAPI_Session::get();
967 // 1. check whether the delete should be processed in the module
968 ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
969 bool isSketchOp = PartSet_SketcherMgr::isSketchOperation(anOperation),
970 isNestedOp = sketchMgr()->isNestedSketchOperation(anOperation);
971 if (isSketchOp || isNestedOp) {
973 // 2. find selected presentations
974 // selected objects should be collected before the current operation abort because
975 // the abort leads to selection lost on constraint objects. It can be corrected after #386 issue
976 ModuleBase_ISelection* aSel = workshop()->selection();
977 QObjectPtrList aSelectedObj = aSel->selectedPresentations();
978 // if there are no selected objects in the viewer, that means that the selection in another
979 // place cased this method. It is necessary to return the false value to understande in above
980 // method that delete is not processed
981 if (aSelectedObj.count() == 0)
984 // avoid delete of the objects, which are not belong to the current sketch
985 // in order to do not delete results of other sketches
986 QObjectPtrList aSketchObjects;
987 QObjectPtrList::const_iterator anIt = aSelectedObj.begin(), aLast = aSelectedObj.end();
988 for ( ; anIt != aLast; anIt++) {
989 ObjectPtr anObject = *anIt;
990 if (mySketchMgr->isObjectOfSketch(anObject)) {
991 // sketch feature should be used in this list because workshop deletes features only
992 // results are skipped
993 FeaturePtr aSketchFeature = ModelAPI_Feature::feature(anObject);
994 aSketchObjects.append(aSketchFeature);
997 // if the selection contains only local selected presentations from other sketches,
998 // the Delete operation should not be done at all
999 if (aSketchObjects.size() == 0)
1002 // 3. start operation
1003 QString aDescription = aWorkshop->contextMenuMgr()->action("DELETE_CMD")->text();
1004 ModuleBase_Operation* anOpAction = new ModuleBase_Operation(aDescription, this);
1006 // the active nested sketch operation should be aborted unconditionally
1007 // the Delete action should be additionally granted for the Sketch operation
1008 // in order to do not abort/commit it
1010 if (!anOpMgr->canStartOperation(anOpAction->id(), isCommitted))
1011 return true; // the objects are processed but can not be deleted
1013 anOpMgr->startOperation(anOpAction);
1015 // WORKAROUND, should be done to avoid viewer highlight update after deletetion of objects
1016 // the problem is in AIS Dimensions recompute
1017 // if a line and the dim are removed, line is the first
1018 // it causes the AIS recompute, where the base line is null,
1019 // the result is empty AIS in the viewer
1020 XGUI_Tools::workshop(myWorkshop)->selector()->clearSelection();
1022 // 4. delete features
1023 // sketch feature should be skipped, only sub-features can be removed
1024 // when sketch operation is active
1025 aWorkshop->deleteFeatures(aSketchObjects);
1026 // 5. stop operation
1027 anOpMgr->commitOperation();
1032 //******************************************************
1033 void PartSet_Module::editFeature(FeaturePtr theFeature)
1035 storeConstraintsState(theFeature->getKind());
1036 ModuleBase_IModule::editFeature(theFeature);
1039 //******************************************************
1040 bool PartSet_Module::canCommitOperation() const
1045 //******************************************************
1046 void PartSet_Module::launchOperation(const QString& theCmdId, const bool& isStartAfterCommitOnly)
1048 myIsOperationIsLaunched = true;
1049 storeConstraintsState(theCmdId.toStdString());
1050 updateConstraintsState(theCmdId.toStdString());
1052 ModuleBase_IModule::launchOperation(theCmdId, isStartAfterCommitOnly);
1054 myIsOperationIsLaunched = false;
1057 //******************************************************
1058 void PartSet_Module::storeConstraintsState(const std::string& theFeatureKind)
1060 if (myWorkshop->currentOperation() &&
1061 myWorkshop->currentOperation()->id().toStdString() == SketchPlugin_Sketch::ID()) {
1062 const QMap<PartSet_Tools::ConstraintVisibleState, bool>& aShownStates =
1063 mySketchMgr->showConstraintStates();
1064 myHasConstraintShown = aShownStates;
1068 //******************************************************
1069 void PartSet_Module::updateConstraintsState(const std::string& theFeatureKind)
1071 if (PartSet_SketcherMgr::constraintsIdList().contains(theFeatureKind.c_str()) ||
1072 PartSet_SketcherMgr::replicationsIdList().contains(theFeatureKind.c_str())) {
1073 // Show constraints if a constraint was anOperation
1074 mySketchMgr->updateBySketchParameters(PartSet_Tools::Geometrical, true);
1075 mySketchMgr->updateBySketchParameters(PartSet_Tools::Dimensional, true);
1076 mySketchMgr->updateBySketchParameters(PartSet_Tools::Expressions,
1077 myHasConstraintShown[PartSet_Tools::Expressions]);
1081 //******************************************************
1082 void PartSet_Module::onObjectDisplayed(ObjectPtr theObject, AISObjectPtr theAIS)
1084 Handle(AIS_InteractiveObject) anAIS = theAIS->impl<Handle(AIS_InteractiveObject)>();
1085 if (!anAIS.IsNull()) {
1086 FeaturePtr aFeature = ModelAPI_Feature::feature(theObject);
1087 if (aFeature.get()) {
1088 bool aToUseZLayer = false;
1089 if (PartSet_Tools::findRefsToMeFeature(aFeature,SketchPlugin_Projection::ID()))
1090 aToUseZLayer = true;
1092 CompositeFeaturePtr aParent = ModelAPI_Tools::compositeOwner(aFeature);
1093 aToUseZLayer = (aParent.get() && (aParent->getKind() == SketchPlugin_Sketch::ID()));
1096 Handle(AIS_InteractiveContext) aCtx = anAIS->GetContext();
1097 if (aFeature->getKind() == SketchPlugin_ConstraintCoincidence::ID())
1098 aCtx->SetZLayer(anAIS, Graphic3d_ZLayerId_Top);
1100 aCtx->SetZLayer(anAIS, myVisualLayerId);
1106 //******************************************************
1107 void PartSet_Module::onBeforeObjectErase(ObjectPtr theObject, AISObjectPtr theAIS)
1110 // it should be recomputed in order to disappear in the viewer if the corresponded object
1112 //if (myCustomPrs->isActive())
1113 // myCustomPrs->redisplay(theObject, false);
1116 //******************************************************
1117 void PartSet_Module::onViewTransformed(int theTrsfType)
1119 // Set length of arrows constant in pixel size
1120 // if the operation is panning or rotate or panglobal then do nothing
1121 if ((theTrsfType == 1) || (theTrsfType == 3) || (theTrsfType == 4))
1123 ModuleBase_IViewer* aViewer = myWorkshop->viewer();
1124 Handle(AIS_InteractiveContext) aContext = aViewer->AISContext();
1125 if (aContext.IsNull())
1128 //Handle(V3d_View) aView = aViewer->activeView();
1130 XGUI_Workshop* aWorkshop = getWorkshop();
1131 XGUI_Displayer* aDisplayer = aWorkshop->displayer();
1132 Handle(V3d_Viewer) aV3dViewer = aContext->CurrentViewer();
1133 Handle(V3d_View) aView;
1135 for (aV3dViewer->InitDefinedViews();
1136 aV3dViewer->MoreDefinedViews();
1137 aV3dViewer->NextDefinedViews()) {
1138 Handle(V3d_View) aV = aV3dViewer->DefinedView();
1139 double aS = aV->Scale();
1148 bool isModified = false;
1149 ModuleBase_Operation* aCurrentOperation = myWorkshop->currentOperation();
1150 if (aCurrentOperation &&
1151 (PartSet_SketcherMgr::isSketchOperation(aCurrentOperation) ||
1152 sketchMgr()->isNestedSketchOperation(aCurrentOperation) ||
1153 (aCurrentOperation->id() == "Measurement")))
1155 double aLen = aView->Convert(SketcherPrs_Tools::getConfigArrowSize());
1156 SketcherPrs_Tools::setArrowSize(aLen);
1157 const double aCurScale = aViewer->activeView()->Camera()->Scale();
1158 aViewer->SetScale(aViewer->activeView(), aCurScale);
1160 QList<Handle(AIS_InteractiveObject)> aPrsList = aDisplayer->displayedPresentations();
1161 foreach(Handle(AIS_InteractiveObject) aAisObj, aPrsList) {
1163 QList<AISObjectPtr> aPrsList = aDisplayer->displayedPresentations();
1164 foreach(AISObjectPtr aAIS, aPrsList) {
1165 Handle(AIS_InteractiveObject) aAisObj = aAIS->impl<Handle(AIS_InteractiveObject)>();
1167 Handle(AIS_Dimension) aDim = Handle(AIS_Dimension)::DownCast(aAisObj);
1168 if (!aDim.IsNull()) {
1169 aDim->DimensionAspect()->ArrowAspect()->SetLength(aLen);
1170 aContext->Redisplay(aDim, false);
1175 aDisplayer->updateViewer();
1180 //******************************************************
1181 bool PartSet_Module::isCustomPrsActivated(const ModuleBase_CustomizeFlag& theFlag) const
1183 return myCustomPrs->isActive(theFlag);
1186 //******************************************************
1187 void PartSet_Module::activateCustomPrs(const FeaturePtr& theFeature,
1188 const ModuleBase_CustomizeFlag& theFlag,
1189 const bool theUpdateViewer)
1191 myCustomPrs->activate(theFeature, theFlag, theUpdateViewer);
1194 //******************************************************
1195 void PartSet_Module::deactivateCustomPrs(const ModuleBase_CustomizeFlag& theFlag,
1196 const bool theUpdateViewer)
1198 myCustomPrs->deactivate(theFlag, theUpdateViewer);
1201 //******************************************************
1202 //bool PartSet_Module::customisePresentation(ResultPtr theResult, AISObjectPtr thePrs,
1203 // std::shared_ptr<GeomAPI_ICustomPrs> theCustomPrs)
1205 // bool aCustomized = false;
1207 // XGUI_Workshop* aWorkshop = getWorkshop();
1208 // XGUI_Displayer* aDisplayer = aWorkshop->displayer();
1209 // ObjectPtr anObject = aDisplayer->getObject(thePrs);
1211 // return aCustomized;
1213 // if (!theResult.get()) {
1214 // std::vector<int> aColor;
1215 // XGUI_CustomPrs::getDefaultColor(anObject, true, aColor);
1216 // if (!aColor.empty()) {
1217 // aCustomized = thePrs->setColor(aColor[0], aColor[1], aColor[2]);
1220 // // customize dimentional constrains
1221 // sketchMgr()->customisePresentation(anObject);
1223 // return aCustomized;
1226 ////******************************************************
1227 //bool PartSet_Module::afterCustomisePresentation(std::shared_ptr<ModelAPI_Result> theResult,
1228 // AISObjectPtr thePrs,
1229 // GeomCustomPrsPtr theCustomPrs)
1231 // bool aCustomized = false;
1233 // XGUI_Workshop* aWorkshop = getWorkshop();
1234 // XGUI_Displayer* aDisplayer = aWorkshop->displayer();
1235 // ObjectPtr anObject = aDisplayer->getObject(thePrs);
1237 // return aCustomized;
1239 // std::vector<int> aColor;
1240 // bool aUseCustomColor = true;
1241 // if (aUseCustomColor)
1242 // myOverconstraintListener->getCustomColor(anObject, aColor);
1243 // // customize sketch symbol presentation
1244 // Handle(AIS_InteractiveObject) anAISIO = thePrs->impl<Handle(AIS_InteractiveObject)>();
1245 // if (!anAISIO.IsNull()) {
1246 // if (!Handle(SketcherPrs_SymbolPrs)::DownCast(anAISIO).IsNull()) {
1247 // Handle(SketcherPrs_SymbolPrs) aPrs = Handle(SketcherPrs_SymbolPrs)::DownCast(anAISIO);
1248 // if (!aPrs.IsNull()) {
1249 // aPrs->SetCustomColor(aColor);
1250 // aCustomized = true;
1252 // } else if (!Handle(SketcherPrs_Coincident)::DownCast(anAISIO).IsNull()) {
1253 // Handle(SketcherPrs_Coincident) aPrs = Handle(SketcherPrs_Coincident)::DownCast(anAISIO);
1254 // if (!aPrs.IsNull()) {
1255 // aPrs->SetCustomColor(aColor);
1256 // aCustomized = true;
1260 // // customize sketch dimension constraint presentation
1261 // if (!aCustomized) {
1262 // if (!aColor.empty()) { // otherwise presentation has the default color
1263 // aCustomized = thePrs->setColor(aColor[0], aColor[1], aColor[2]);
1266 // return aCustomized;
1269 //******************************************************
1270 bool PartSet_Module::customizeFeature(ObjectPtr theObject, const ModuleBase_CustomizeFlag& theFlag,
1271 const bool theUpdateViewer)
1273 bool isRedisplayed = false;
1274 if (myCustomPrs->isActive(theFlag))
1275 isRedisplayed = myCustomPrs->redisplay(theObject, theFlag, theUpdateViewer);
1277 return isRedisplayed;
1280 //******************************************************
1281 void PartSet_Module::customizeObjectBrowser(QWidget* theObjectBrowser)
1283 XGUI_ObjectsBrowser* aOB = dynamic_cast<XGUI_ObjectsBrowser*>(theObjectBrowser);
1285 QLabel* aLabel = aOB->activeDocLabel();
1286 aLabel->installEventFilter(myMenuMgr);
1287 connect(aLabel, SIGNAL(customContextMenuRequested(const QPoint&)),
1288 SLOT(onActiveDocPopup(const QPoint&)));
1289 aOB->treeView()->setExpandsOnDoubleClick(false);
1290 connect(aOB->treeView(), SIGNAL(doubleClicked(const QModelIndex&)),
1291 SLOT(onTreeViewDoubleClick(const QModelIndex&)));
1293 Events_Loop* aLoop = Events_Loop::loop();
1294 aLoop->registerListener(this, Events_Loop::eventByName(EVENT_OBJECT_CREATED));
1298 //******************************************************
1299 void PartSet_Module::onActiveDocPopup(const QPoint& thePnt)
1301 SessionPtr aMgr = ModelAPI_Session::get();
1302 QAction* aActivatePartAction = myMenuMgr->action("ACTIVATE_PARTSET_CMD");
1304 XGUI_Workshop* aWorkshop = getWorkshop();
1305 QLabel* aHeader = aWorkshop->objectBrowser()->activeDocLabel();
1307 aActivatePartAction->setEnabled((aMgr->activeDocument() != aMgr->moduleDocument()));
1310 aMenu.addAction(aActivatePartAction);
1313 if (aMgr->activeDocument() == aMgr->moduleDocument()) {
1314 DocumentPtr aDoc = aMgr->moduleDocument();
1315 int aNbParts = aDoc->size(ModelAPI_ResultPart::group());
1316 bool aHaveToActivate = false;
1317 for (int i = 0; i < aNbParts; i++) {
1318 ObjectPtr aObj = aDoc->object(ModelAPI_ResultPart::group(), i);
1319 ResultPartPtr aPartRes = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aObj);
1320 if (!aPartRes->partDoc().get()) {
1321 aHaveToActivate = true;
1325 if (aHaveToActivate) {
1326 QAction* aActivateAllPartAction = myMenuMgr->action("ACTIVATE_ALL_PARTS_CMD");
1327 aMenu.addAction(aActivateAllPartAction);
1332 aMenu.exec(aHeader->mapToGlobal(thePnt));
1335 //******************************************************
1336 AISObjectPtr PartSet_Module::createPresentation(const ObjectPtr& theObject)
1338 Handle(AIS_InteractiveObject) anAISPrs = mySketchMgr->createPresentation(theObject);
1339 if (anAISPrs.IsNull()) {
1340 ResultPtr aResult = std::dynamic_pointer_cast<ModelAPI_Result>(theObject);
1341 if (aResult.get()) {
1342 std::shared_ptr<GeomAPI_Shape> aShapePtr = ModelAPI_Tools::shape(aResult);
1343 if (aShapePtr.get() != NULL)
1344 anAISPrs = new ModuleBase_ResultPrs(aResult);
1347 FieldStepPtr aStep =
1348 std::dynamic_pointer_cast<ModelAPI_ResultField::ModelAPI_FieldStep>(theObject);
1350 anAISPrs = new PartSet_FieldStepPrs(aStep);
1355 if (!anAISPrs.IsNull()) {
1356 Handle(AIS_Shape) aShapePrs = Handle(AIS_Shape)::DownCast(anAISPrs);
1357 if (!aShapePrs.IsNull())
1358 ModuleBase_Tools::setPointBallHighlighting((AIS_Shape*)aShapePrs.get());
1360 anAIS = AISObjectPtr(new GeomAPI_AISObject());
1361 anAIS->setImpl(new Handle(AIS_InteractiveObject)(anAISPrs));
1362 customizePresentation(theObject, anAIS);
1367 //******************************************************
1368 void getResultColor(const ResultPtr& theResult, std::vector<int>& theColor)
1370 ModelAPI_Tools::getColor(theResult, theColor);
1371 if (theColor.empty())
1372 PartSet_Tools::getDefaultColor(theResult, false, theColor);
1375 //******************************************************
1376 double getResultDeflection(const ResultPtr& theResult)
1378 double aDeflection = ModelAPI_Tools::getDeflection(theResult);
1379 if (aDeflection < 0)
1380 aDeflection = PartSet_Tools::getDefaultDeflection(theResult);
1384 //******************************************************
1385 double getResultTransparency(const ResultPtr& theResult)
1387 double aTransparency = ModelAPI_Tools::getTransparency(theResult);
1388 if (aTransparency < 0)
1389 aTransparency = PartSet_Tools::getDefaultTransparency();
1390 return aTransparency;
1394 //******************************************************
1395 void PartSet_Module::customizePresentation(const ObjectPtr& theObject,
1396 const AISObjectPtr& thePrs) const
1398 if (mySketchMgr->isObjectOfSketch(theObject)) {
1399 mySketchMgr->customizeSketchPresentation(theObject, thePrs);
1402 ResultPtr aResult = std::dynamic_pointer_cast<ModelAPI_Result>(theObject);
1403 if (aResult.get()) {
1404 std::vector<int> aColor;
1405 getResultColor(aResult, aColor);
1407 SessionPtr aMgr = ModelAPI_Session::get();
1408 if (aMgr->activeDocument() != aResult->document()) {
1409 QColor aQColor(aColor[0], aColor[1], aColor[2]);
1411 QColor::fromHsvF(aQColor.hueF(), aQColor.saturationF() / 3., aQColor.valueF());
1412 aColor[0] = aNewColor.red();
1413 aColor[1] = aNewColor.green();
1414 aColor[2] = aNewColor.blue();
1416 thePrs->setColor(aColor[0], aColor[1], aColor[2]);
1418 thePrs->setDeflection(getResultDeflection(aResult));
1420 thePrs->setTransparency(getResultTransparency(aResult));
1422 FeaturePtr aFeature = ModelAPI_Feature::feature(theObject);
1423 if (aFeature.get()) {
1424 if (aFeature->getKind() == SketchPlugin_Sketch::ID())
1425 thePrs->setWidth(2);
1431 //******************************************************
1432 ObjectPtr PartSet_Module::findPresentedObject(const AISObjectPtr& theAIS) const
1435 ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
1437 /// If last line finished on vertex the lines creation sequence has to be break
1438 ModuleBase_IPropertyPanel* aPanel = aOperation->propertyPanel();
1440 ModuleBase_ModelWidget* anActiveWidget = aPanel->activeWidget();
1441 // if there is an active widget, find the presented object in it
1442 if (!anActiveWidget)
1443 anActiveWidget = aPanel->preselectionWidget();
1445 ModuleBase_WidgetValidated* aWidgetValidated = dynamic_cast<ModuleBase_WidgetValidated*>
1447 if (aWidgetValidated)
1448 anObject = aWidgetValidated->findPresentedObject(theAIS);
1454 //******************************************************
1455 bool PartSet_Module::canBeShaded(Handle(AIS_InteractiveObject) theAIS) const
1457 bool aCanBeShaged = true;
1459 Handle(PartSet_ResultSketchPrs) aPrs = Handle(PartSet_ResultSketchPrs)::DownCast(theAIS);
1461 aCanBeShaged = false;
1463 return aCanBeShaged;
1466 //******************************************************
1467 void PartSet_Module::addObjectBrowserMenu(QMenu* theMenu) const
1469 QObjectPtrList aObjects = myWorkshop->selection()->selectedObjects();
1470 int aSelected = aObjects.size();
1471 SessionPtr aMgr = ModelAPI_Session::get();
1472 QAction* aActivatePartAction = myMenuMgr->action("ACTIVATE_PART_CMD");
1474 bool hasResult = false;
1475 bool hasFeature = false;
1476 bool hasParameter = false;
1477 bool hasCompositeOwner = false;
1478 bool hasResultInHistory = false;
1479 bool hasFolder = false;
1480 ModuleBase_Tools::checkObjects(aObjects, hasResult, hasFeature, hasParameter,
1481 hasCompositeOwner, hasResultInHistory, hasFolder);
1483 ModuleBase_Operation* aCurrentOp = myWorkshop->currentOperation();
1484 if (aSelected == 1) {
1485 ObjectPtr aObject = aObjects.first();
1487 ResultPartPtr aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aObject);
1488 FeaturePtr aFeature = std::dynamic_pointer_cast<ModelAPI_Feature>(aObject);
1489 bool isPart = aPart.get() ||
1490 (aFeature.get() && (aFeature->getKind() == PartSetPlugin_Part::ID()));
1492 DocumentPtr aPartDoc;
1494 aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aFeature->firstResult());
1496 if (aPart.get()) // this may be null is Part feature is disabled
1497 aPartDoc = aPart->partDoc();
1499 theMenu->addAction(aActivatePartAction);
1500 aActivatePartAction->setEnabled((aMgr->activeDocument() != aPartDoc));
1502 } else if (aObject->document() == aMgr->activeDocument()) {
1503 if (hasParameter || hasFeature) {
1504 myMenuMgr->action("EDIT_CMD")->setEnabled(true);
1505 theMenu->addAction(myMenuMgr->action("EDIT_CMD"));
1506 if (aCurrentOp && aFeature.get()) {
1507 if (aCurrentOp->id().toStdString() == aFeature->getKind())
1508 myMenuMgr->action("EDIT_CMD")->setEnabled(false);
1515 myMenuMgr->action("EDIT_CMD")->setEnabled(aCurrentOp == 0);
1516 theMenu->addAction(myMenuMgr->action("EDIT_CMD"));
1517 theMenu->addSeparator();
1520 bool aNotDeactivate = (aCurrentOp == 0);
1521 if (!aNotDeactivate) {
1522 aActivatePartAction->setEnabled(false);
1526 //******************************************************
1527 #define EXPAND_PARENT(OBJ) \
1528 QModelIndex aObjIndex = aDataModel->objectIndex(OBJ); \
1529 if (aObjIndex.isValid()) { \
1530 QModelIndex aParent = aObjIndex.parent(); \
1531 int aCount = aDataModel->rowCount(aParent); \
1533 aTreeView->setExpanded(aParent, true); \
1536 //******************************************************
1537 void PartSet_Module::processEvent(const std::shared_ptr<Events_Message>& theMessage)
1539 if (theMessage->eventID() == Events_Loop::loop()->eventByName(EVENT_DOCUMENT_CHANGED)) {
1540 SessionPtr aMgr = ModelAPI_Session::get();
1541 if (!aMgr->hasModuleDocument()) // if document is closed, do not call the document creation
1543 // Do not change activation of parts if an operation active
1544 static QStringList aAllowActivationList;
1545 if (aAllowActivationList.isEmpty())
1546 aAllowActivationList <<
1547 QString(PartSetPlugin_Part::ID().c_str()) <<
1548 QString(PartSetPlugin_Duplicate::ID().c_str()) <<
1549 QString(PartSetPlugin_Remove::ID().c_str());
1550 if (myWorkshop->currentOperation() &&
1551 (!aAllowActivationList.contains(myWorkshop->currentOperation()->id())))
1553 XGUI_Workshop* aWorkshop = getWorkshop();
1554 bool needUpdate = false;
1555 XGUI_DataTree* aTreeView;
1556 if (aWorkshop->objectBrowser()) {
1557 aTreeView = aWorkshop->objectBrowser()->treeView();
1558 QLabel* aLabel = aWorkshop->objectBrowser()->activeDocLabel();
1559 QPalette aPalet = aLabel->palette();
1561 DocumentPtr aActiveDoc = aMgr->activeDocument();
1563 // Clear active part index if there is no Part documents
1564 // It could be not null if document was closed and opened a new
1565 // without closeDocument call
1566 if (aMgr->allOpenedDocuments().size() <= 1)
1567 myActivePartIndex = QModelIndex();
1569 XGUI_DataModel* aDataModel = aWorkshop->objectBrowser()->dataModel();
1570 QModelIndex aOldActive = myActivePartIndex;
1571 myActivePartIndex = aDataModel->documentRootIndex(aActiveDoc, 0);
1572 if (myActivePartIndex.isValid()) {
1573 needUpdate = aTreeView->isExpanded(myActivePartIndex);
1575 aTreeView->setExpanded(myActivePartIndex, true);
1577 if ((aOldActive != myActivePartIndex) && (aOldActive.isValid()))
1578 aTreeView->setExpanded(aOldActive, false);
1580 aLabel->setPalette(aPalet);
1582 aWorkshop->updateCommandStatus();
1584 // Update displayed objects in order to update active color
1585 XGUI_Displayer* aDisplayer = aWorkshop->displayer();
1586 QObjectPtrList aObjects = aDisplayer->displayedObjects();
1588 foreach(ObjectPtr aObj, aObjects) {
1589 aHidden = !aObj->data() || !aObj->data()->isValid() ||
1590 aObj->isDisabled() || (!aObj->isDisplayed());
1592 aDisplayer->redisplay(aObj, false);
1595 aDisplayer->updateViewer();
1596 // Update tree items if they are expanded
1598 aTreeView->viewport()->update(aTreeView->viewport()->rect());
1600 } else if (theMessage->eventID() == Events_Loop::loop()->eventByName(EVENT_OBJECT_CREATED)) {
1601 std::shared_ptr<ModelAPI_ObjectUpdatedMessage> aUpdMsg =
1602 std::dynamic_pointer_cast<ModelAPI_ObjectUpdatedMessage>(theMessage);
1603 std::set<ObjectPtr> aObjects = aUpdMsg->objects();
1605 ObjectPtr aConstrObj;
1606 ObjectPtr aResultObj;
1607 std::set<ObjectPtr>::const_iterator aIt;
1608 DocumentPtr aRootDoc = ModelAPI_Session::get()->moduleDocument();
1609 for (aIt = aObjects.begin(); aIt != aObjects.end(); ++aIt) {
1610 ObjectPtr aObject = (*aIt);
1611 if ((!aResultObj.get()) && (aObject->groupName() == ModelAPI_ResultBody::group())
1612 && (aObject->document() != aRootDoc))
1613 aResultObj = aObject;
1614 if ((!aConstrObj.get()) && (aObject->groupName() == ModelAPI_ResultConstruction::group())
1615 && (aObject->document() != aRootDoc))
1616 aConstrObj = aObject;
1617 if (aResultObj.get() && aConstrObj.get())
1621 if (aResultObj.get() || aConstrObj.get()) {
1622 XGUI_Workshop* aWorkshop = getWorkshop();
1623 XGUI_DataTree* aTreeView = aWorkshop->objectBrowser()->treeView();
1624 XGUI_DataModel* aDataModel = aWorkshop->objectBrowser()->dataModel();
1626 if (aResultObj.get()) {
1627 EXPAND_PARENT(aResultObj)
1629 if (aConstrObj.get()) {
1630 EXPAND_PARENT(aConstrObj)
1634 else if (theMessage->eventID() == Events_Loop::loop()->eventByName(EVENT_OBJECT_TO_REDISPLAY)) {
1635 CompositeFeaturePtr aSketch = mySketchMgr->activeSketch();
1636 if (aSketch.get()) {
1637 ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
1638 if (PartSet_SketcherMgr::isSketchOperation(anOperation))
1639 mySketchMgr->previewSketchPlane()->createSketchPlane(aSketch, myWorkshop);
1644 //******************************************************
1645 void PartSet_Module::onTreeViewDoubleClick(const QModelIndex& theIndex)
1647 if (myWorkshop->currentOperation()) // Do not change activation of parts if an operation active
1649 SessionPtr aMgr = ModelAPI_Session::get();
1650 if (!theIndex.isValid()) {
1651 // It seems that this code is obsolete
1652 //aMgr->setActiveDocument(aMgr->moduleDocument());
1655 if (theIndex.column() != 1) // Use only first column
1658 XGUI_Workshop* aWorkshop = getWorkshop();
1659 XGUI_DataModel* aDataModel = aWorkshop->objectBrowser()->dataModel();
1660 // De not use non editable Indexes
1661 if ((aDataModel->flags(theIndex) & Qt::ItemIsSelectable) == 0)
1663 ObjectPtr aObj = aDataModel->object(theIndex);
1665 ResultPartPtr aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aObj);
1666 if (!aPart.get()) { // Probably this is Feature
1667 FeaturePtr aPartFeature = std::dynamic_pointer_cast<ModelAPI_Feature>(aObj);
1668 if (aPartFeature.get() && (aPartFeature->getKind() == PartSetPlugin_Part::ID())) {
1669 aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aPartFeature->firstResult());
1672 if (aPart.get()) { // if this is a part
1673 if (aPart->partDoc() == aMgr->activeDocument()) {
1674 myMenuMgr->activatePartSet();
1676 myMenuMgr->activatePart(aPart);
1681 //******************************************************
1682 void PartSet_Module::onViewCreated(ModuleBase_IViewWindow*)
1684 // z layer is created for all started operations in order to visualize operation AIS presentation
1686 Handle(AIS_InteractiveContext) aContext = myWorkshop->viewer()->AISContext();
1687 if (aContext.IsNull())
1690 Handle(V3d_Viewer) aViewer = aContext->CurrentViewer();
1691 if (myVisualLayerId == 0) {
1692 if (myVisualLayerId == 0)
1693 aViewer->AddZLayer(myVisualLayerId);
1695 TColStd_SequenceOfInteger aZList;
1696 aViewer->GetAllZLayers(aZList);
1697 bool aFound = false;
1698 for (int i = 1; i <= aZList.Length(); i++) {
1699 if (aZList(i) == myVisualLayerId) {
1705 aViewer->AddZLayer(myVisualLayerId);
1707 // if there is an active operation with validated widget,
1708 // the filters of this widget should be activated in the created view
1709 myWorkshop->selectionActivate()->updateSelectionFilters();
1710 myWorkshop->selectionActivate()->updateSelectionModes();
1713 //******************************************************
1714 void PartSet_Module::widgetStateChanged(int thePreviousState)
1716 mySketchMgr->widgetStateChanged(thePreviousState);
1719 //******************************************************
1720 bool PartSet_Module::processEnter(const std::string& thePreviousAttributeID)
1722 return mySketchReentrantMgr->processEnter(thePreviousAttributeID);
1725 //******************************************************
1726 void PartSet_Module::beforeOperationStopped(ModuleBase_Operation* theOperation)
1728 if (PartSet_SketcherMgr::isSketchOperation(theOperation)) {
1729 mySketchMgr->stopSketch(theOperation);
1733 //******************************************************
1734 GeomShapePtr PartSet_Module::findShape(const AttributePtr& theAttribute)
1736 GeomShapePtr aGeomShape;
1738 ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
1739 if (anOperation && sketchMgr()->isNestedSketchOperation(anOperation)) {
1740 aGeomShape = PartSet_Tools::findShapeBy2DPoint(theAttribute, myWorkshop);
1745 //******************************************************
1746 AttributePtr PartSet_Module::findAttribute(const ObjectPtr& theObject,
1747 const GeomShapePtr& theGeomShape)
1749 AttributePtr anAttribute;
1750 GeomShapePtr aGeomShape = theGeomShape;
1751 if (!aGeomShape.get()) {
1752 // processing shape of result, e.g. sketch circle center is selected, this is a result
1753 // the geom shape is empty, the shape of result should be used
1754 ResultPtr aResult = std::dynamic_pointer_cast<ModelAPI_Result>(theObject);
1755 if (aResult.get()) {
1756 aGeomShape = aResult->shape();
1760 if (aGeomShape.get()) {
1761 TopoDS_Shape aTDSShape = aGeomShape->impl<TopoDS_Shape>();
1762 std::pair<AttributePtr, int> anAttrAndIndex =
1763 PartSet_Tools::findAttributeBy2dPoint(theObject, aTDSShape, mySketchMgr->activeSketch());
1764 return anAttrAndIndex.first;
1769 //******************************************************
1770 std::shared_ptr<Events_Message> PartSet_Module::reentrantMessage()
1772 return sketchReentranceMgr()->reentrantMessage();
1775 //******************************************************
1776 void PartSet_Module::setReentrantPreSelection(const std::shared_ptr<Events_Message>& theMessage)
1778 sketchReentranceMgr()->setReentrantPreSelection(theMessage);
1781 //******************************************************
1782 void PartSet_Module::onChoiceChanged(ModuleBase_ModelWidget* theWidget,
1785 ModuleBase_WidgetChoice* aChoiceWidget = dynamic_cast<ModuleBase_WidgetChoice*>(theWidget);
1789 QString aChoiceTitle = aChoiceWidget->getPropertyPanelTitle(theIndex);
1790 if (!aChoiceTitle.isEmpty()) {
1791 ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
1794 ModuleBase_IPropertyPanel* aPanel = aOperation->propertyPanel();
1796 aPanel->setWindowTitle(aChoiceTitle);
1800 //******************************************************
1801 XGUI_Workshop* PartSet_Module::getWorkshop() const
1803 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
1804 return aConnector->workshop();
1807 void PartSet_Module::setDefaultConstraintShown()
1809 myHasConstraintShown[PartSet_Tools::Geometrical] = true;
1810 myHasConstraintShown[PartSet_Tools::Dimensional] = true;
1811 myHasConstraintShown[PartSet_Tools::Expressions] = false;
1814 //******************************************************
1815 ModuleBase_ITreeNode* PartSet_Module::rootNode() const
1820 //******************************************************
1821 void PartSet_Module::disableCustomMode(ModuleBase_CustomizeFlag theMode) {
1822 myCustomPrs->disableCustomMode(theMode);
1825 //******************************************************
1826 void PartSet_Module::enableCustomModes() {
1827 myCustomPrs->enableCustomModes();