1 // Copyright (C) 2014-20xx CEA/DEN, EDF R&D
3 #include "PartSet_Module.h"
4 #include "PartSet_WidgetSketchLabel.h"
5 #include "PartSet_Validators.h"
6 #include "PartSet_Tools.h"
7 #include "PartSet_PreviewPlanes.h"
8 #include "PartSet_WidgetPoint2d.h"
9 #include "PartSet_WidgetPoint2dDistance.h"
10 #include "PartSet_WidgetPoint2DFlyout.h"
11 #include "PartSet_WidgetShapeSelector.h"
12 #include "PartSet_WidgetMultiSelector.h"
13 #include "PartSet_WidgetMultiSelectorComposite.h"
14 #include "PartSet_WidgetEditor.h"
15 #include "PartSet_WidgetFileSelector.h"
16 #include "PartSet_WidgetSketchCreator.h"
17 #include "PartSet_SketcherMgr.h"
18 #include "PartSet_SketcherReetntrantMgr.h"
19 #include "PartSet_MenuMgr.h"
20 #include "PartSet_CustomPrs.h"
21 #include "PartSet_IconFactory.h"
22 #include "PartSet_WidgetChoice.h"
23 #include "PartSet_OverconstraintListener.h"
25 #include "PartSet_Filters.h"
26 #include "PartSet_FilterInfinite.h"
28 #include <PartSetPlugin_Remove.h>
29 #include <PartSetPlugin_Part.h>
30 #include <PartSetPlugin_Duplicate.h>
32 #include <ModuleBase_Operation.h>
33 #include <ModuleBase_OperationAction.h>
34 #include <ModuleBase_IViewer.h>
35 #include <ModuleBase_IViewWindow.h>
36 #include <ModuleBase_IPropertyPanel.h>
37 #include <ModuleBase_WidgetEditor.h>
38 #include <ModuleBase_WidgetValidated.h>
39 #include <ModuleBase_FilterFactory.h>
40 #include <ModuleBase_Tools.h>
41 #include <ModuleBase_OperationFeature.h>
42 #include <ModuleBase_WidgetFactory.h>
43 #include <ModuleBase_OperationDescription.h>
45 #include <ModelAPI_Object.h>
46 #include <ModelAPI_Events.h>
47 #include <ModelAPI_Validator.h>
48 #include <ModelAPI_Data.h>
49 #include <ModelAPI_Session.h>
50 #include <ModelAPI_ResultBody.h>
51 #include <ModelAPI_AttributeString.h>
53 #include <GeomDataAPI_Point2D.h>
54 #include <GeomDataAPI_Point.h>
55 #include <GeomDataAPI_Dir.h>
57 #include <XGUI_Displayer.h>
58 #include <XGUI_Workshop.h>
59 #include <XGUI_OperationMgr.h>
60 #include <XGUI_PropertyPanel.h>
61 #include <XGUI_ModuleConnector.h>
62 #include <XGUI_ContextMenuMgr.h>
63 #include <XGUI_Tools.h>
64 #include <XGUI_ObjectsBrowser.h>
65 #include <XGUI_SelectionMgr.h>
66 #include <XGUI_DataModel.h>
67 #include <XGUI_ErrorMgr.h>
68 #include <XGUI_CustomPrs.h>
70 #include <SketchPlugin_Feature.h>
71 #include <SketchPlugin_Sketch.h>
72 #include <SketchPlugin_ConstraintAngle.h>
73 #include <SketchPlugin_ConstraintLength.h>
74 #include <SketchPlugin_ConstraintDistance.h>
75 #include <SketchPlugin_ConstraintParallel.h>
76 #include <SketchPlugin_ConstraintPerpendicular.h>
77 #include <SketchPlugin_ConstraintRadius.h>
79 #include <SketcherPrs_SymbolPrs.h>
80 #include <SketcherPrs_Tools.h>
82 #include <Events_Loop.h>
83 #include <Config_PropManager.h>
84 #include <Config_Keywords.h>
86 #include <StdSelect_TypeOfFace.hxx>
87 #include <TopoDS_Vertex.hxx>
89 #include <TopoDS_Shape.hxx>
90 #include <BRep_Tool.hxx>
91 #include <AIS_Dimension.hxx>
94 #include <QMouseEvent>
97 #include <QApplication>
98 #include <QMessageBox>
99 #include <QMainWindow>
103 #include <GeomAlgoAPI_FaceBuilder.h>
104 #include <GeomDataAPI_Dir.h>
106 #include <SelectMgr_ListIteratorOfListOfFilter.hxx>
112 /*!Create and return new instance of XGUI_Module*/
113 extern "C" PARTSET_EXPORT ModuleBase_IModule* createModule(ModuleBase_IWorkshop* theWshop)
115 return new PartSet_Module(theWshop);
118 PartSet_Module::PartSet_Module(ModuleBase_IWorkshop* theWshop)
119 : ModuleBase_IModule(theWshop),
122 new PartSet_IconFactory();
124 mySketchMgr = new PartSet_SketcherMgr(this);
125 mySketchReentrantMgr = new PartSet_SketcherReetntrantMgr(theWshop);
127 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(theWshop);
128 XGUI_Workshop* aWorkshop = aConnector->workshop();
130 ModuleBase_IViewer* aViewer = theWshop->viewer();
131 connect(aViewer, SIGNAL(keyRelease(ModuleBase_IViewWindow*, QKeyEvent*)),
132 this, SLOT(onKeyRelease(ModuleBase_IViewWindow*, QKeyEvent*)));
133 connect(aViewer, SIGNAL(viewTransformed(int)),
134 SLOT(onViewTransformed(int)));
135 connect(aViewer, SIGNAL(viewCreated(ModuleBase_IViewWindow*)),
136 SLOT(onViewCreated(ModuleBase_IViewWindow*)));
137 myMenuMgr = new PartSet_MenuMgr(this);
138 myCustomPrs = new PartSet_CustomPrs(theWshop);
140 myOverconstraintListener = new PartSet_OverconstraintListener(theWshop);
142 Events_Loop* aLoop = Events_Loop::loop();
143 aLoop->registerListener(this, Events_Loop::eventByName(EVENT_DOCUMENT_CHANGED));
145 mySelectionFilters.Append(new PartSet_GlobalFilter(myWorkshop));
146 mySelectionFilters.Append(new PartSet_FilterInfinite(myWorkshop));
148 myHasConstraintShown[PartSet_Tools::Geometrical] = true;
149 myHasConstraintShown[PartSet_Tools::Dimensional] = true;
150 myHasConstraintShown[PartSet_Tools::Expressions] = false;
152 Config_PropManager::registerProp("Visualization", "operation_parameter_color",
153 "Reference shape wireframe color in operation", Config_Prop::Color,
154 PartSet_CustomPrs::OPERATION_PARAMETER_COLOR());
155 Config_PropManager::registerProp("Visualization", "operation_result_color",
156 "Result shape wireframe color in operation", Config_Prop::Color,
157 PartSet_CustomPrs::OPERATION_RESULT_COLOR());
158 Config_PropManager::registerProp("Visualization", "operation_highlight_color",
159 "Multi selector item color in operation", Config_Prop::Color,
160 PartSet_CustomPrs::OPERATION_HIGHLIGHT_COLOR());
163 PartSet_Module::~PartSet_Module()
165 SelectMgr_ListIteratorOfListOfFilter aIt(mySelectionFilters);
166 for (; aIt.More(); aIt.Next()) {
167 Handle(SelectMgr_Filter) aFilter = aIt.Value();
168 if (!aFilter.IsNull())
172 delete myOverconstraintListener;
175 void PartSet_Module::activateSelectionFilters()
177 SelectMgr_ListIteratorOfListOfFilter aIt(mySelectionFilters);
178 for (; aIt.More(); aIt.Next()) {
179 Handle(SelectMgr_Filter) aFilter = aIt.Value();
180 if (!aFilter.IsNull())
181 myWorkshop->viewer()->addSelectionFilter(aFilter);
185 void PartSet_Module::deactivateSelectionFilters()
187 SelectMgr_ListIteratorOfListOfFilter aIt(mySelectionFilters);
188 for (; aIt.More(); aIt.Next()) {
189 Handle(SelectMgr_Filter) aFilter = aIt.Value();
190 if (!aFilter.IsNull())
191 myWorkshop->viewer()->removeSelectionFilter(aFilter);
195 void PartSet_Module::storeSelection()
197 sketchMgr()->storeSelection();
200 void PartSet_Module::restoreSelection()
202 sketchMgr()->restoreSelection();
205 void PartSet_Module::registerValidators()
207 //Registering of validators
208 SessionPtr aMgr = ModelAPI_Session::get();
209 ModelAPI_ValidatorsFactory* aFactory = aMgr->validators();
210 aFactory->registerValidator("PartSet_DistanceSelection", new PartSet_DistanceSelection);
211 aFactory->registerValidator("PartSet_LengthSelection", new PartSet_LengthSelection);
212 aFactory->registerValidator("PartSet_PerpendicularSelection", new PartSet_PerpendicularSelection);
213 aFactory->registerValidator("PartSet_ParallelSelection", new PartSet_ParallelSelection);
214 aFactory->registerValidator("PartSet_RadiusSelection", new PartSet_RadiusSelection);
215 aFactory->registerValidator("PartSet_RigidSelection", new PartSet_RigidSelection);
216 aFactory->registerValidator("PartSet_CoincidentSelection", new PartSet_CoincidentSelection);
217 aFactory->registerValidator("PartSet_HVDirSelection", new PartSet_HVDirSelection);
218 aFactory->registerValidator("PartSet_TangentSelection", new PartSet_TangentSelection);
219 aFactory->registerValidator("PartSet_FilletSelection", new PartSet_FilletSelection);
220 aFactory->registerValidator("PartSet_AngleSelection", new PartSet_AngleSelection);
221 aFactory->registerValidator("PartSet_EqualSelection", new PartSet_EqualSelection);
222 aFactory->registerValidator("PartSet_CollinearSelection", new PartSet_CollinearSelection);
223 aFactory->registerValidator("PartSet_MiddlePointSelection", new PartSet_MiddlePointSelection);
224 aFactory->registerValidator("PartSet_DifferentObjects", new PartSet_DifferentObjectsValidator);
225 aFactory->registerValidator("PartSet_CoincidentAttr", new PartSet_CoincidentAttr);
228 void PartSet_Module::registerFilters()
230 //Registering of selection filters
231 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
232 ModuleBase_FilterFactory* aFactory = aConnector->selectionFilters();
235 void PartSet_Module::registerProperties()
237 Config_PropManager::registerProp("Sketch planes", "planes_size", "Size", Config_Prop::Double,
239 Config_PropManager::registerProp("Sketch planes", "planes_thickness", "Thickness",
240 Config_Prop::Integer, SKETCH_WIDTH);
241 Config_PropManager::registerProp("Sketch planes", "rotate_to_plane", "Rotate to plane when selected",
242 Config_Prop::Boolean, "false");
245 void PartSet_Module::connectToPropertyPanel(ModuleBase_ModelWidget* theWidget, const bool isToConnect)
247 mySketchMgr->connectToPropertyPanel(theWidget, isToConnect);
250 void PartSet_Module::operationCommitted(ModuleBase_Operation* theOperation)
252 if (PartSet_SketcherMgr::isNestedSketchOperation(theOperation)) {
253 mySketchMgr->commitNestedSketch(theOperation);
256 /// Restart sketcher operations automatically
257 if (!mySketchReentrantMgr->operationCommitted(theOperation)) {
259 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>(theOperation);
260 if (aFOperation && !aFOperation->isEditOperation()) {
261 // the selection is cleared after commit the create operation
262 // in order to do not use the same selected objects in the restarted operation
263 // for common behaviour, the selection is cleared even if the operation is not restarted
264 getWorkshop()->selector()->clearSelection();
269 void PartSet_Module::operationAborted(ModuleBase_Operation* theOperation)
271 /// Restart sketcher operations automatically
272 mySketchReentrantMgr->operationAborted(theOperation);
275 void PartSet_Module::operationStarted(ModuleBase_Operation* theOperation)
277 ModuleBase_IWorkshop* anIWorkshop = workshop();
278 if (!theOperation->getDescription()->hasXmlRepresentation()) { //!< No need for property panel
279 anIWorkshop->updateCommandStatus();
282 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>
285 XGUI_Workshop* aWorkshop = XGUI_Tools::workshop(anIWorkshop);
286 XGUI_PropertyPanel* aPropertyPanel = aWorkshop->propertyPanel();
287 ModuleBase_ModelWidget* aFilledWidget = 0;
288 bool aPostonedWidgetActivation = false;
289 FeaturePtr aFeature = aFOperation->feature();
291 std::string aGreedAttributeId = ModuleBase_Tools::findGreedAttribute(anIWorkshop, aFeature);
292 // if there is a greed attribute, automatic commit by preselection for this feature is prohibited
293 aWorkshop->setPropertyPanel(aFOperation);
295 // filling the operation values by the current selection
296 // if the operation can be committed after the controls filling, the method perform should
297 // be stopped. Otherwise unnecessary presentations can be shown(e.g. operation prs in sketch)
298 bool isOperationCommitted = false;
299 if (!aFOperation->isEditOperation()) {
300 aFilledWidget = aFOperation->activateByPreselection(aGreedAttributeId);
301 if (currentOperation() != aFOperation)
302 isOperationCommitted = true;
304 if (aGreedAttributeId.empty()) {
305 // a signal should be emitted before the next widget activation
306 // because, the activation of the next widget will give a focus to the widget. As a result
307 // the value of the widget is initialized. And commit may happens until the value is entered.
309 if (mySketchReentrantMgr->canBeCommittedByPreselection())
310 isOperationCommitted = mySketchMgr->operationActivatedByPreselection();
311 // activate the next obligatory widget
312 if (!isOperationCommitted)
313 aPropertyPanel->activateNextWidget(aFilledWidget);
316 else { // there is a greed widget
317 const QList<ModuleBase_ModelWidget*>& aWidgets = aPropertyPanel->modelWidgets();
318 std::string aFirstAttributeId = aWidgets.front()->attributeID();
319 // activate next widget after greeded if it is the first widget in the panel
320 // else the first panel widget is already activated by operation start
321 if (aFirstAttributeId == aGreedAttributeId)
322 aPostonedWidgetActivation = true;
325 } if (!isOperationCommitted) {
326 anIWorkshop->updateCommandStatus();
327 aWorkshop->connectToPropertyPanel(true);
328 operationStartedInternal(aFOperation);
330 // the objects of the current operation should be deactivated
331 QObjectPtrList anObjects;
332 anObjects.append(aFeature);
333 std::list<ResultPtr> aResults = aFeature->results();
334 std::list<ResultPtr>::const_iterator aIt;
335 for (aIt = aResults.begin(); aIt != aResults.end(); ++aIt) {
336 anObjects.append(*aIt);
338 QObjectPtrList::const_iterator anIt = anObjects.begin(), aLast = anObjects.end();
339 for (; anIt != aLast; anIt++)
340 aWorkshop->deactivateActiveObject(*anIt, false);
341 if (anObjects.size() > 0) {
342 XGUI_Displayer* aDisplayer = aWorkshop->displayer();
343 aDisplayer->updateViewer();
346 if (aPostonedWidgetActivation) {
347 // if the widget is an empty in the chain of activated widgets, the current operation
348 // is restarted. It should be performed after functionality of the operation starting
349 aPropertyPanel->activateNextWidget(aFilledWidget);
355 void PartSet_Module::operationStartedInternal(ModuleBase_Operation* theOperation)
357 /// Restart sketcher operations automatically
358 mySketchReentrantMgr->operationStarted(theOperation);
360 if (PartSet_SketcherMgr::isSketchOperation(theOperation)) {
361 mySketchMgr->startSketch(theOperation);
363 else if (PartSet_SketcherMgr::isNestedSketchOperation(theOperation)) {
364 mySketchMgr->startNestedSketch(theOperation);
367 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>(theOperation);
369 myCustomPrs->activate(aFOperation->feature(), ModuleBase_IModule::CustomizeArguments, true);
370 myCustomPrs->activate(aFOperation->feature(), ModuleBase_IModule::CustomizeResults, true);
374 void PartSet_Module::operationResumed(ModuleBase_Operation* theOperation)
376 ModuleBase_IModule::operationResumed(theOperation);
378 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>(theOperation);
380 myCustomPrs->activate(aFOperation->feature(), ModuleBase_IModule::CustomizeArguments, true);
381 myCustomPrs->activate(aFOperation->feature(), ModuleBase_IModule::CustomizeResults, true);
385 void PartSet_Module::operationStopped(ModuleBase_Operation* theOperation)
387 bool isModifiedArgs = myCustomPrs->deactivate(ModuleBase_IModule::CustomizeArguments, false);
388 bool isModifiedResults = myCustomPrs->deactivate(ModuleBase_IModule::CustomizeResults, false);
389 bool isModified = isModifiedArgs || isModifiedResults;
391 if (PartSet_SketcherMgr::isNestedSketchOperation(theOperation)) {
392 mySketchMgr->stopNestedSketch(theOperation);
395 //VSV: Viewer is updated on feature update and redisplay
397 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(myWorkshop);
398 XGUI_Displayer* aDisplayer = aConnector->workshop()->displayer();
399 aDisplayer->updateViewer();
402 QMap<PartSet_Tools::ConstraintVisibleState, bool>::const_iterator anIt = myHasConstraintShown.begin(),
403 aLast = myHasConstraintShown.end();
404 for (; anIt != aLast; anIt++) {
405 myHasConstraintShown[anIt.key()];
406 mySketchMgr->updateBySketchParameters(anIt.key(), anIt.value());
410 ModuleBase_Operation* PartSet_Module::currentOperation() const
412 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
413 XGUI_OperationMgr* anOpMgr = aConnector->workshop()->operationMgr();
414 return anOpMgr->currentOperation();
417 bool PartSet_Module::canUndo() const
419 bool aCanUndo = false;
420 SessionPtr aMgr = ModelAPI_Session::get();
421 if (aMgr->hasModuleDocument() && aMgr->canUndo()) {
422 aCanUndo = !aMgr->isOperation();
423 if (!aCanUndo) // check the enable state additionally by sketch manager
424 aCanUndo = aMgr->canUndo();
429 bool PartSet_Module::canRedo() const
431 bool aCanRedo = false;
432 SessionPtr aMgr = ModelAPI_Session::get();
433 if (aMgr->hasModuleDocument() && aMgr->canRedo()) {
434 aCanRedo = !aMgr->isOperation();
435 if (!aCanRedo) // check the enable state additionally by sketch manager
436 aCanRedo = aMgr->canRedo();
441 bool PartSet_Module::canApplyAction(const ObjectPtr& theObject, const QString& theActionId) const
444 if (theActionId == "MOVE_CMD") {
445 FeaturePtr aFeature = ModelAPI_Feature::feature(theObject);
447 // part features can not be moved in the history.
448 if (aFeature->getKind() == PartSetPlugin_Part::ID())
455 bool PartSet_Module::canEraseObject(const ObjectPtr& theObject) const
457 // the sketch manager put the restriction to the objects erase
458 return mySketchMgr->canEraseObject(theObject);
461 bool PartSet_Module::canDisplayObject(const ObjectPtr& theObject) const
463 // the sketch manager put the restriction to the objects display
464 return mySketchMgr->canDisplayObject(theObject);
467 void PartSet_Module::processHiddenObject(const std::list<ObjectPtr>& theObjects)
469 mySketchMgr->processHiddenObject(theObjects);
472 bool PartSet_Module::canActivateSelection(const ObjectPtr& theObject) const
474 bool aCanActivate = ModuleBase_IModule::canActivateSelection(theObject);
476 ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
477 bool isSketchOp = PartSet_SketcherMgr::isSketchOperation(anOperation),
478 isNestedOp = PartSet_SketcherMgr::isNestedSketchOperation(anOperation);
479 if (isSketchOp || isNestedOp) {
480 // in active sketch operation it is possible to activate operation object in selection
481 // in the edit operation, e.g. points of the line can be moved when the line is edited
482 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>(anOperation);
483 aCanActivate = aCanActivate || (aFOperation && aFOperation->isEditOperation());
488 bool PartSet_Module::addViewerMenu(QMenu* theMenu, const QMap<QString, QAction*>& theStdActions) const
490 return myMenuMgr->addViewerMenu(theMenu, theStdActions);
493 void PartSet_Module::updateViewerMenu(const QMap<QString, QAction*>& theStdActions)
495 myMenuMgr->updateViewerMenu(theStdActions);
498 QString PartSet_Module::getFeatureError(const FeaturePtr& theFeature)
500 QString anError = ModuleBase_IModule::getFeatureError(theFeature);
501 if (anError.isEmpty())
502 anError = sketchMgr()->getFeatureError(theFeature);
507 void PartSet_Module::grantedOperationIds(ModuleBase_Operation* theOperation,
508 QStringList& theIds) const
510 myMenuMgr->grantedOperationIds(theOperation, theIds);
512 if (PartSet_SketcherMgr::isSketchOperation(theOperation)) {
513 XGUI_Workshop* aWorkshop = getWorkshop();
514 theIds.append(aWorkshop->contextMenuMgr()->action("DELETE_CMD")->text());
518 void PartSet_Module::activeSelectionModes(QIntList& theModes)
521 if (mySketchMgr->activeSketch().get())
522 PartSet_SketcherMgr::sketchSelectionModes(theModes);
525 bool PartSet_Module::isMouseOverWindow()
527 return mySketchMgr->isMouseOverWindow();
530 void PartSet_Module::closeDocument()
535 void PartSet_Module::clearViewer()
537 myCustomPrs->clearPrs();
539 XGUI_Workshop* aWorkshop = getWorkshop();
540 XGUI_Displayer* aDisplayer = aWorkshop->displayer();
541 aDisplayer->deactivateSelectionFilters();
544 void PartSet_Module::propertyPanelDefined(ModuleBase_Operation* theOperation)
546 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>(theOperation);
550 ModuleBase_IPropertyPanel* aPanel = aFOperation->propertyPanel();
551 // we have to manually activate the sketch label in edit mode
552 if (PartSet_SketcherMgr::isSketchOperation(aFOperation) && (aFOperation->isEditOperation()))
553 aPanel->activateWidget(aPanel->modelWidgets().first());
556 bool PartSet_Module::createWidgets(ModuleBase_Operation* theOperation,
557 QList<ModuleBase_ModelWidget*>& theWidgets) const
559 bool aProcessed = false;
561 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>(theOperation);
562 XGUI_Workshop* aWorkshop = getWorkshop();
563 XGUI_PropertyPanel* aPropertyPanel = aWorkshop->propertyPanel();
564 if (mySketchMgr->activeSketch().get() && aFOperation && aPropertyPanel) {
565 ModuleBase_ISelection* aSelection = workshop()->selection();
566 // click on a point in sketch leads here with the point is highlighted, not yet selected
567 QList<ModuleBase_ViewerPrs> aPreselection = aSelection->getHighlighted();
568 if (aPreselection.size() == 1) {
569 ModuleBase_ViewerPrs aSelectedPrs = aPreselection[0];
570 ObjectPtr anObject = aSelectedPrs.object();
572 FeaturePtr aFeature = ModelAPI_Feature::feature(anObject);
573 FeaturePtr anOpFeature = aFOperation->feature();
574 GeomShapePtr aShape = aSelectedPrs.shape();
575 // click on the digit of dimension constrain comes here with an empty shape, so we need the check
576 if (aFeature == anOpFeature && aShape.get() && !aShape->isNull()) {
577 const TopoDS_Shape& aTDShape = aShape->impl<TopoDS_Shape>();
578 AttributePtr anAttribute = PartSet_Tools::findAttributeBy2dPoint(anObject, aTDShape,
579 mySketchMgr->activeSketch());
580 if (anAttribute.get()) {
581 QString aXmlRepr = aFOperation->getDescription()->xmlRepresentation();
582 ModuleBase_WidgetFactory aFactory(aXmlRepr.toStdString(), workshop());
584 const std::string anAttributeId = anAttribute->id();
585 aFactory.createWidget(aPropertyPanel->contentWidget(), anAttributeId);
587 theWidgets = aFactory.getModelWidgets();
588 // it is possible that the point does not present in XML definition,
589 // in this case, we assume that it is not processed by this module
590 // e.g. "Intersection point" feature
591 aProcessed = !theWidgets.isEmpty();
599 void PartSet_Module::onSelectionChanged()
601 ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
605 bool isSketcherOp = false;
606 // An edit operation is enable only if the current opeation is the sketch operation
607 if (mySketchMgr->activeSketch()) {
608 if (PartSet_Tools::sketchPlane(mySketchMgr->activeSketch()))
609 isSketcherOp = PartSet_SketcherMgr::isSketchOperation(aOperation);
612 // Editing of constraints can be done on selection
613 ModuleBase_ISelection* aSelect = myWorkshop->selection();
614 QList<ModuleBase_ViewerPrs> aSelected = aSelect->getSelected();
615 if (aSelected.size() == 1) {
616 ModuleBase_ViewerPrs aPrs = aSelected.first();
617 ObjectPtr aObject = aPrs.object();
618 FeaturePtr aFeature = ModelAPI_Feature::feature(aObject);
620 std::string aId = aFeature->getKind();
621 if ((aId == SketchPlugin_ConstraintRadius::ID()) ||
622 (aId == SketchPlugin_ConstraintLength::ID()) ||
623 (aId == SketchPlugin_ConstraintDistance::ID()) ||
624 (aId == SketchPlugin_ConstraintAngle::ID())) {
625 editFeature(aFeature);
632 void PartSet_Module::onKeyRelease(ModuleBase_IViewWindow* theWnd, QKeyEvent* theEvent)
634 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
635 XGUI_OperationMgr* anOpMgr = aConnector->workshop()->operationMgr();
636 anOpMgr->onKeyReleased(theWnd->viewPort(), theEvent);
639 ModuleBase_ModelWidget* PartSet_Module::createWidgetByType(const std::string& theType,
641 Config_WidgetAPI* theWidgetApi)
643 ModuleBase_IWorkshop* aWorkshop = workshop();
644 XGUI_Workshop* aXUIWorkshop = getWorkshop();
645 ModuleBase_ModelWidget* aWgt = NULL;
646 if (theType == "sketch-start-label") {
647 PartSet_WidgetSketchLabel* aLabelWgt = new PartSet_WidgetSketchLabel(theParent, aWorkshop,
648 theWidgetApi, myHasConstraintShown);
649 connect(aLabelWgt, SIGNAL(planeSelected(const std::shared_ptr<GeomAPI_Pln>&)),
650 mySketchMgr, SLOT(onPlaneSelected(const std::shared_ptr<GeomAPI_Pln>&)));
651 connect(aLabelWgt, SIGNAL(showConstraintToggled(int, bool)),
652 mySketchMgr, SLOT(onShowConstraintsToggle(int, bool)));
654 } else if (theType == "sketch-2dpoint_selector") {
655 PartSet_WidgetPoint2D* aPointWgt = new PartSet_WidgetPoint2D(theParent, aWorkshop,
657 aPointWgt->setSketch(mySketchMgr->activeSketch());
658 connect(aPointWgt, SIGNAL(vertexSelected()), sketchReentranceMgr(), SLOT(onVertexSelected()));
660 }else if (theType == "sketch-2dpoint_flyout_selector") {
661 PartSet_WidgetPoint2DFlyout* aPointWgt = new PartSet_WidgetPoint2DFlyout(theParent, aWorkshop,
663 aPointWgt->setSketch(mySketchMgr->activeSketch());
664 connect(aPointWgt, SIGNAL(vertexSelected()), sketchReentranceMgr(), SLOT(onVertexSelected()));
666 } else if (theType == "point2ddistance") {
667 PartSet_WidgetPoint2dDistance* aDistanceWgt = new PartSet_WidgetPoint2dDistance(theParent,
668 aWorkshop, theWidgetApi);
669 aDistanceWgt->setSketch(mySketchMgr->activeSketch());
671 } else if (theType == "sketch_shape_selector") {
672 PartSet_WidgetShapeSelector* aShapeSelectorWgt =
673 new PartSet_WidgetShapeSelector(theParent, aWorkshop, theWidgetApi);
674 aShapeSelectorWgt->setSketcher(mySketchMgr->activeSketch());
675 aWgt = aShapeSelectorWgt;
676 } else if (theType == "sketch_multi_selector") {
677 PartSet_WidgetMultiSelector* aShapeSelectorWgt =
678 new PartSet_WidgetMultiSelector(theParent, aWorkshop, theWidgetApi);
679 aShapeSelectorWgt->setSketcher(mySketchMgr->activeSketch());
680 aWgt = aShapeSelectorWgt;
681 } else if (theType == "composite_multi_selector") {
682 PartSet_WidgetMultiSelectorComposite* aShapeSelectorWgt =
683 new PartSet_WidgetMultiSelectorComposite(theParent, aWorkshop, theWidgetApi);
684 aWgt = aShapeSelectorWgt;
686 else if (theType == WDG_DOUBLEVALUE_EDITOR) {
687 aWgt = new PartSet_WidgetEditor(theParent, aWorkshop, theWidgetApi);
688 } else if (theType == "export_file_selector") {
689 aWgt = new PartSet_WidgetFileSelector(theParent, aWorkshop, theWidgetApi);
690 } else if (theType == "sketch_launcher") {
691 aWgt = new PartSet_WidgetSketchCreator(theParent, this, theWidgetApi);
692 } else if (theType == "module_choice") {
693 aWgt = new PartSet_WidgetChoice(theParent, theWidgetApi);
694 connect(aWgt, SIGNAL(itemSelected(ModuleBase_ModelWidget*, int)),
695 this, SLOT(onChoiceChanged(ModuleBase_ModelWidget*, int)));
700 ModuleBase_ModelWidget* PartSet_Module::activeWidget() const
702 ModuleBase_ModelWidget* anActiveWidget = 0;
704 anActiveWidget = mySketchReentrantMgr->internalActiveWidget();
705 if (!anActiveWidget) {
706 ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
708 ModuleBase_IPropertyPanel* aPanel = aOperation->propertyPanel();
709 anActiveWidget = aPanel->activeWidget();
712 return anActiveWidget;
715 bool PartSet_Module::deleteObjects()
717 bool isProcessed = false;
719 XGUI_Workshop* aWorkshop = getWorkshop();
720 XGUI_OperationMgr* anOpMgr = aWorkshop->operationMgr();
722 //SessionPtr aMgr = ModelAPI_Session::get();
723 // 1. check whether the delete should be processed in the module
724 ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
725 bool isSketchOp = PartSet_SketcherMgr::isSketchOperation(anOperation),
726 isNestedOp = PartSet_SketcherMgr::isNestedSketchOperation(anOperation);
727 if (isSketchOp || isNestedOp) {
729 // 2. find selected presentations
730 // selected objects should be collected before the current operation abort because
731 // the abort leads to selection lost on constraint objects. It can be corrected after #386 issue
732 ModuleBase_ISelection* aSel = workshop()->selection();
733 QObjectPtrList aSelectedObj = aSel->selectedPresentations();
734 // if there are no selected objects in the viewer, that means that the selection in another
735 // place cased this method. It is necessary to return the false value to understande in above
736 // method that delete is not processed
737 if (aSelectedObj.count() == 0)
740 // avoid delete of the objects, which are not belong to the current sketch
741 // in order to do not delete results of other sketches
742 QObjectPtrList aSketchObjects;
743 QObjectPtrList::const_iterator anIt = aSelectedObj.begin(), aLast = aSelectedObj.end();
744 for ( ; anIt != aLast; anIt++) {
745 ObjectPtr anObject = *anIt;
746 if (mySketchMgr->isObjectOfSketch(anObject)) {
747 // sketch feature should be used in this list because workshop deletes features only
748 // results are skipped
749 FeaturePtr aSketchFeature = ModelAPI_Feature::feature(anObject);
750 aSketchObjects.append(aSketchFeature);
753 // if the selection contains only local selected presentations from other sketches,
754 // the Delete operation should not be done at all
755 if (aSketchObjects.size() == 0)
758 // 3. start operation
759 QString aDescription = aWorkshop->contextMenuMgr()->action("DELETE_CMD")->text();
760 ModuleBase_OperationAction* anOpAction = new ModuleBase_OperationAction(aDescription, this);
762 // the active nested sketch operation should be aborted unconditionally
763 // the Delete action should be additionally granted for the Sketch operation
764 // in order to do not abort/commit it
765 if (!anOpMgr->canStartOperation(anOpAction->id()))
766 return true; // the objects are processed but can not be deleted
768 anOpMgr->startOperation(anOpAction);
770 // 4. delete features
771 // sketch feature should be skipped, only sub-features can be removed
772 // when sketch operation is active
773 aWorkshop->deleteFeatures(aSketchObjects);
775 anOpMgr->commitOperation();
780 void PartSet_Module::onFeatureTriggered()
782 QAction* aCmd = dynamic_cast<QAction*>(sender());
783 if (aCmd->isCheckable() && aCmd->isChecked()) {
784 // 1. check whether the delete should be processed in the module
785 ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
786 bool isNestedOp = PartSet_SketcherMgr::isNestedCreateOperation(anOperation);
788 // in case if in the viewer nothing is displayed, the create operation should not be
789 // comitted even if all values of the feature are initialized
790 if (!mySketchMgr->canDisplayCurrentCreatedFeature()) {
791 // the action information should be saved before the operation is aborted
792 // because this abort leads to update command status, which unchecks this action
793 anOperation->abort();
794 launchOperation(aCmd->data().toString());
798 ModuleBase_IModule::onFeatureTriggered();
801 void PartSet_Module::editFeature(FeaturePtr theFeature)
803 storeConstraintsState(theFeature->getKind());
804 ModuleBase_IModule::editFeature(theFeature);
807 void PartSet_Module::launchOperation(const QString& theCmdId)
809 storeConstraintsState(theCmdId.toStdString());
810 ModuleBase_IModule::launchOperation(theCmdId);
813 void PartSet_Module::storeConstraintsState(const std::string& theFeatureKind)
815 if (myWorkshop->currentOperation() &&
816 myWorkshop->currentOperation()->id().toStdString() == SketchPlugin_Sketch::ID()) {
817 const QMap<PartSet_Tools::ConstraintVisibleState, bool>& aShownStates =
818 mySketchMgr->showConstraintStates();
819 myHasConstraintShown = aShownStates;
821 if (PartSet_SketcherMgr::constraintsIdList().contains(theFeatureKind.c_str())) {
822 // Show constraints if a constraint was anOperation
823 mySketchMgr->updateBySketchParameters(PartSet_Tools::Geometrical, true);
824 mySketchMgr->updateBySketchParameters(PartSet_Tools::Dimensional, true);
825 mySketchMgr->updateBySketchParameters(PartSet_Tools::Expressions,
826 myHasConstraintShown[PartSet_Tools::Expressions]);
830 void PartSet_Module::onObjectDisplayed(ObjectPtr theObject, AISObjectPtr theAIS)
832 Handle(AIS_InteractiveObject) anAIS = theAIS->impl<Handle(AIS_InteractiveObject)>();
833 if (!anAIS.IsNull()) {
834 Handle(AIS_InteractiveContext) aCtx = anAIS->GetContext();
835 Handle(AIS_Dimension) aDim = Handle(AIS_Dimension)::DownCast(anAIS);
836 if (!aDim.IsNull()) {
837 aCtx->SetZLayer(aDim, myVisualLayerId);
839 Handle(SketcherPrs_SymbolPrs) aCons = Handle(SketcherPrs_SymbolPrs)::DownCast(anAIS);
841 aCtx->SetZLayer(aCons, myVisualLayerId);
846 void PartSet_Module::onBeforeObjectErase(ObjectPtr theObject, AISObjectPtr theAIS)
849 // it should be recomputed in order to disappear in the viewer if the corresponded object
851 //if (myCustomPrs->isActive())
852 // myCustomPrs->redisplay(theObject, false);
855 void PartSet_Module::onViewTransformed(int theTrsfType)
857 // Set length of arrows constant in pixel size
858 // if the operation is panning or rotate or panglobal then do nothing
859 if ((theTrsfType == 1) || (theTrsfType == 3) || (theTrsfType == 4))
861 ModuleBase_IViewer* aViewer = myWorkshop->viewer();
862 Handle(AIS_InteractiveContext) aContext = aViewer->AISContext();
863 if (aContext.IsNull())
866 //Handle(V3d_View) aView = aViewer->activeView();
868 XGUI_Workshop* aWorkshop = getWorkshop();
869 XGUI_Displayer* aDisplayer = aWorkshop->displayer();
870 Handle(V3d_Viewer) aV3dViewer = aContext->CurrentViewer();
871 Handle(V3d_View) aView;
873 for (aV3dViewer->InitDefinedViews();
874 aV3dViewer->MoreDefinedViews();
875 aV3dViewer->NextDefinedViews()) {
876 Handle(V3d_View) aV = aV3dViewer->DefinedView();
877 double aS = aV->Scale();
885 double aLen = aView->Convert(SketcherPrs_Tools::getDefaultArrowSize());
887 double aPrevLen = SketcherPrs_Tools::getArrowSize();
888 SketcherPrs_Tools::setArrowSize(aLen);
889 const double aPrevScale = aViewer->Scale(aViewer->activeView());
890 const double aCurScale = aViewer->activeView()->Camera()->Scale();
891 aViewer->SetScale(aViewer->activeView(), aCurScale);
892 SketcherPrs_Tools::setTextHeight (aCurScale / aPrevScale * SketcherPrs_Tools::getTextHeight());
893 bool isModified = false;
894 QList<AISObjectPtr> aPrsList = aDisplayer->displayedPresentations();
895 foreach (AISObjectPtr aAIS, aPrsList) {
896 Handle(AIS_InteractiveObject) aAisObj = aAIS->impl<Handle(AIS_InteractiveObject)>();
898 Handle(AIS_Dimension) aDim = Handle(AIS_Dimension)::DownCast(aAisObj);
899 if (!aDim.IsNull()) {
900 aDim->DimensionAspect()->ArrowAspect()->SetLength(aLen);
901 aContext->Redisplay(aDim, false);
906 aDisplayer->updateViewer();
909 void PartSet_Module::activateCustomPrs(const FeaturePtr& theFeature, const ModuleBase_CustomizeFlag& theFlag,
910 const bool theUpdateViewer)
912 myCustomPrs->activate(theFeature, theFlag, theUpdateViewer);
915 void PartSet_Module::deactivateCustomPrs(const ModuleBase_CustomizeFlag& theFlag,
916 const bool theUpdateViewer)
918 myCustomPrs->deactivate(theFlag, theUpdateViewer);
921 bool PartSet_Module::customisePresentation(ResultPtr theResult, AISObjectPtr thePrs,
922 std::shared_ptr<GeomAPI_ICustomPrs> theCustomPrs)
924 bool aCustomized = false;
929 XGUI_Workshop* aWorkshop = getWorkshop();
930 XGUI_Displayer* aDisplayer = aWorkshop->displayer();
931 ObjectPtr anObject = aDisplayer->getObject(thePrs);
932 if (anObject.get()) {
933 bool isConflicting = myOverconstraintListener->isConflictingObject(anObject);
934 // customize sketch symbol presentation
936 Handle(AIS_InteractiveObject) anAISIO = thePrs->impl<Handle(AIS_InteractiveObject)>();
937 if (!anAISIO.IsNull()) {
938 if (!Handle(SketcherPrs_SymbolPrs)::DownCast(anAISIO).IsNull()) {
939 Handle(SketcherPrs_SymbolPrs) aPrs = Handle(SketcherPrs_SymbolPrs)::DownCast(anAISIO);
940 if (!aPrs.IsNull()) {
941 std::vector<int> aColor;
942 myOverconstraintListener->getConflictingColor(aColor);
943 aPrs->SetConflictingConstraint(isConflicting, aColor);
949 // customize sketch dimension constraint presentation
951 std::vector<int> aColor;
953 myOverconstraintListener->getConflictingColor(aColor);
956 XGUI_CustomPrs::getDefaultColor(anObject, true, aColor);
957 if (!aColor.empty()) {
958 thePrs->setColor(aColor[0], aColor[1], aColor[2]);
963 // customize dimentional constrains
964 sketchMgr()->customizePresentation(anObject);
970 bool PartSet_Module::customizeObject(ObjectPtr theObject, const ModuleBase_CustomizeFlag& theFlag,
971 const bool theUpdateViewer)
973 bool isRedisplayed = false;
974 if (myCustomPrs->isActive(theFlag))
975 isRedisplayed = myCustomPrs->redisplay(theObject, theFlag, theUpdateViewer);
977 return isRedisplayed;
980 void PartSet_Module::customizeObjectBrowser(QWidget* theObjectBrowser)
982 XGUI_ObjectsBrowser* aOB = dynamic_cast<XGUI_ObjectsBrowser*>(theObjectBrowser);
984 QLabel* aLabel = aOB->activeDocLabel();
985 aLabel->installEventFilter(myMenuMgr);
986 connect(aLabel, SIGNAL(customContextMenuRequested(const QPoint&)),
987 SLOT(onActiveDocPopup(const QPoint&)));
988 //QPalette aPalet = aLabel->palette();
989 //aPalet.setColor(QPalette::Text, QColor(0, 72, 140));
990 //aLabel->setPalette(aPalet);
991 aOB->treeView()->setExpandsOnDoubleClick(false);
992 connect(aOB->treeView(), SIGNAL(doubleClicked(const QModelIndex&)),
993 SLOT(onTreeViewDoubleClick(const QModelIndex&)));
997 void PartSet_Module::onActiveDocPopup(const QPoint& thePnt)
999 SessionPtr aMgr = ModelAPI_Session::get();
1000 QAction* aActivatePartAction = myMenuMgr->action("ACTIVATE_PARTSET_CMD");
1002 XGUI_Workshop* aWorkshop = getWorkshop();
1003 QLabel* aHeader = aWorkshop->objectBrowser()->activeDocLabel();
1005 aActivatePartAction->setEnabled((aMgr->activeDocument() != aMgr->moduleDocument()));
1008 aMenu.addAction(aActivatePartAction);
1009 aMenu.exec(aHeader->mapToGlobal(thePnt));
1013 ObjectPtr PartSet_Module::findPresentedObject(const AISObjectPtr& theAIS) const
1016 ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
1018 /// If last line finished on vertex the lines creation sequence has to be break
1019 ModuleBase_IPropertyPanel* aPanel = aOperation->propertyPanel();
1021 ModuleBase_ModelWidget* anActiveWidget = aPanel->activeWidget();
1022 // if there is an active widget, find the presented object in it
1023 if (!anActiveWidget)
1024 anActiveWidget = aPanel->preselectionWidget();
1026 ModuleBase_WidgetValidated* aWidgetValidated = dynamic_cast<ModuleBase_WidgetValidated*>
1028 if (aWidgetValidated)
1029 anObject = aWidgetValidated->findPresentedObject(theAIS);
1035 void PartSet_Module::addObjectBrowserMenu(QMenu* theMenu) const
1037 QObjectPtrList aObjects = myWorkshop->selection()->selectedObjects();
1038 int aSelected = aObjects.size();
1039 SessionPtr aMgr = ModelAPI_Session::get();
1040 QAction* aActivatePartAction = myMenuMgr->action("ACTIVATE_PART_CMD");
1042 ModuleBase_Operation* aCurrentOp = myWorkshop->currentOperation();
1043 if (aSelected == 1) {
1044 bool hasResult = false;
1045 bool hasFeature = false;
1046 bool hasParameter = false;
1047 bool hasSubFeature = false;
1048 ModuleBase_Tools::checkObjects(aObjects, hasResult, hasFeature, hasParameter, hasSubFeature);
1050 ObjectPtr aObject = aObjects.first();
1052 ResultPartPtr aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aObject);
1053 FeaturePtr aFeature = std::dynamic_pointer_cast<ModelAPI_Feature>(aObject);
1054 bool isPart = aPart.get() ||
1055 (aFeature.get() && (aFeature->getKind() == PartSetPlugin_Part::ID()));
1057 DocumentPtr aPartDoc;
1059 aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aFeature->firstResult());
1061 if (aPart.get()) // this may be null is Part feature is disabled
1062 aPartDoc = aPart->partDoc();
1064 theMenu->addAction(aActivatePartAction);
1065 aActivatePartAction->setEnabled((aMgr->activeDocument() != aPartDoc));
1067 } else if (aObject->document() == aMgr->activeDocument()) {
1068 if (hasParameter || hasFeature) {
1069 myMenuMgr->action("EDIT_CMD")->setEnabled(true);
1070 theMenu->addAction(myMenuMgr->action("EDIT_CMD"));
1071 if (aCurrentOp && aFeature.get()) {
1072 if (aCurrentOp->id().toStdString() == aFeature->getKind())
1073 myMenuMgr->action("EDIT_CMD")->setEnabled(false);
1078 ResultBodyPtr aResult = std::dynamic_pointer_cast<ModelAPI_ResultBody>(aObject);
1080 theMenu->addAction(myMenuMgr->action("SELECT_PARENT_CMD"));
1083 bool aNotDeactivate = (aCurrentOp == 0);
1084 if (!aNotDeactivate) {
1085 aActivatePartAction->setEnabled(false);
1089 void PartSet_Module::processEvent(const std::shared_ptr<Events_Message>& theMessage)
1091 if (theMessage->eventID() == Events_Loop::loop()->eventByName(EVENT_DOCUMENT_CHANGED)) {
1092 // Do not change activation of parts if an operation active
1093 static QStringList aAllowActivationList;
1094 if (aAllowActivationList.isEmpty())
1095 aAllowActivationList <<
1096 QString(PartSetPlugin_Part::ID().c_str()) <<
1097 QString(PartSetPlugin_Duplicate::ID().c_str()) <<
1098 QString(PartSetPlugin_Remove::ID().c_str());
1099 if (myWorkshop->currentOperation() &&
1100 (!aAllowActivationList.contains(myWorkshop->currentOperation()->id())))
1102 XGUI_Workshop* aWorkshop = getWorkshop();
1103 XGUI_DataTree* aTreeView = aWorkshop->objectBrowser()->treeView();
1104 QLabel* aLabel = aWorkshop->objectBrowser()->activeDocLabel();
1105 QPalette aPalet = aLabel->palette();
1107 SessionPtr aMgr = ModelAPI_Session::get();
1108 DocumentPtr aActiveDoc = aMgr->activeDocument();
1109 if (aActivePartIndex.isValid())
1110 aTreeView->setExpanded(aActivePartIndex, false);
1111 XGUI_DataModel* aDataModel = aWorkshop->objectBrowser()->dataModel();
1112 aActivePartIndex = aDataModel->documentRootIndex(aActiveDoc);
1113 if (aActivePartIndex.isValid())
1114 aTreeView->setExpanded(aActivePartIndex, true);
1116 aLabel->setPalette(aPalet);
1117 aWorkshop->updateCommandStatus();
1119 // Update displayed objects in order to update active color
1120 XGUI_Displayer* aDisplayer = aWorkshop->displayer();
1121 QObjectPtrList aObjects = aDisplayer->displayedObjects();
1123 foreach(ObjectPtr aObj, aObjects) {
1124 //TODO: replace by redisplay event.
1125 aHidden = !aObj->data() || !aObj->data()->isValid() ||
1126 aObj->isDisabled() || (!aObj->isDisplayed());
1128 aDisplayer->redisplay(aObj, false);
1130 aDisplayer->updateViewer();
1134 void PartSet_Module::onTreeViewDoubleClick(const QModelIndex& theIndex)
1136 if (myWorkshop->currentOperation()) // Do not change activation of parts if an operation active
1138 SessionPtr aMgr = ModelAPI_Session::get();
1139 if (!theIndex.isValid()) {
1140 aMgr->setActiveDocument(aMgr->moduleDocument());
1143 if (theIndex.column() != 0) // Use only first column
1146 XGUI_Workshop* aWorkshop = getWorkshop();
1147 XGUI_DataModel* aDataModel = aWorkshop->objectBrowser()->dataModel();
1148 // De not use non editable Indexes
1149 if ((aDataModel->flags(theIndex) & Qt::ItemIsSelectable) == 0)
1151 ObjectPtr aObj = aDataModel->object(theIndex);
1153 ResultPartPtr aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aObj);
1154 if (!aPart.get()) { // Probably this is Feature
1155 FeaturePtr aPartFeature = std::dynamic_pointer_cast<ModelAPI_Feature>(aObj);
1156 if (aPartFeature.get() && (aPartFeature->getKind() == PartSetPlugin_Part::ID())) {
1157 aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aPartFeature->firstResult());
1160 if (aPart.get()) { // if this is a part
1161 if (aPart->partDoc() == aMgr->activeDocument()) {
1162 myMenuMgr->activatePartSet();
1170 void PartSet_Module::onViewCreated(ModuleBase_IViewWindow*)
1172 // z layer is created for all started operations in order to visualize operation AIS presentation
1174 Handle(AIS_InteractiveContext) aContext = myWorkshop->viewer()->AISContext();
1175 if (aContext.IsNull())
1178 Handle(V3d_Viewer) aViewer = aContext->CurrentViewer();
1179 if (myVisualLayerId == 0) {
1180 if (myVisualLayerId == 0)
1181 aViewer->AddZLayer(myVisualLayerId);
1183 TColStd_SequenceOfInteger aZList;
1184 aViewer->GetAllZLayers(aZList);
1185 bool aFound = false;
1186 for (int i = 1; i <= aZList.Length(); i++) {
1187 if (aZList(i) == myVisualLayerId) {
1193 aViewer->AddZLayer(myVisualLayerId);
1195 // if there is an active operation with validated widget,
1196 // the filters of this widget should be activated in the created view
1197 ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
1199 ModuleBase_ModelWidget* anActiveWidget = activeWidget();
1200 if (anActiveWidget) {
1201 ModuleBase_WidgetSelector* aWSelector = dynamic_cast<ModuleBase_WidgetSelector*>(anActiveWidget);
1203 aWSelector->activateSelectionAndFilters(true);
1208 //******************************************************
1209 void PartSet_Module::widgetStateChanged(int thePreviousState)
1211 mySketchMgr->widgetStateChanged(thePreviousState);
1214 bool PartSet_Module::processEnter(const std::string& thePreviousAttributeID)
1216 return mySketchReentrantMgr->processEnter(thePreviousAttributeID);
1219 //******************************************************
1220 void PartSet_Module::beforeOperationStarted(ModuleBase_Operation* theOperation)
1224 //******************************************************
1225 void PartSet_Module::beforeOperationStopped(ModuleBase_Operation* theOperation)
1227 if (PartSet_SketcherMgr::isSketchOperation(theOperation)) {
1228 mySketchMgr->stopSketch(theOperation);
1232 //******************************************************
1233 GeomShapePtr PartSet_Module::findShape(const AttributePtr& theAttribute)
1235 GeomShapePtr aGeomShape;
1237 ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
1238 if (anOperation && PartSet_SketcherMgr::isNestedSketchOperation(anOperation)) {
1239 aGeomShape = PartSet_Tools::findShapeBy2DPoint(theAttribute, myWorkshop);
1244 //******************************************************
1245 AttributePtr PartSet_Module::findAttribute(const ObjectPtr& theObject,
1246 const GeomShapePtr& theGeomShape)
1248 AttributePtr anAttribute;
1249 GeomShapePtr aGeomShape = theGeomShape;
1250 if (!aGeomShape.get()) {
1251 // processing shape of result, e.g. sketch circle center is selected, this is a result
1252 // the geom shape is empty, the shape of result should be used
1253 ResultPtr aResult = std::dynamic_pointer_cast<ModelAPI_Result>(theObject);
1254 if (aResult.get()) {
1255 aGeomShape = aResult->shape();
1259 if (aGeomShape.get()) {
1260 TopoDS_Shape aTDSShape = aGeomShape->impl<TopoDS_Shape>();
1261 return PartSet_Tools::findAttributeBy2dPoint(theObject, aTDSShape,
1262 mySketchMgr->activeSketch());
1267 //******************************************************
1268 void PartSet_Module::onChoiceChanged(ModuleBase_ModelWidget* theWidget,
1271 PartSet_WidgetChoice* aChoiceWidget = dynamic_cast<PartSet_WidgetChoice*>(theWidget);
1275 QString aChoiceTitle = aChoiceWidget->getPropertyPanelTitle(theIndex);
1276 if (!aChoiceTitle.isEmpty()) {
1277 ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
1280 ModuleBase_IPropertyPanel* aPanel = aOperation->propertyPanel();
1281 aPanel->setWindowTitle(aChoiceTitle);
1285 //******************************************************
1286 XGUI_Workshop* PartSet_Module::getWorkshop() const
1288 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
1289 return aConnector->workshop();