1 // Copyright (C) 2014-2019 CEA/DEN, EDF R&D
3 // This library is free software; you can redistribute it and/or
4 // modify it under the terms of the GNU Lesser General Public
5 // License as published by the Free Software Foundation; either
6 // version 2.1 of the License, or (at your option) any later version.
8 // This library is distributed in the hope that it will be useful,
9 // but WITHOUT ANY WARRANTY; without even the implied warranty of
10 // MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
11 // Lesser General Public License for more details.
13 // You should have received a copy of the GNU Lesser General Public
14 // License along with this library; if not, write to the Free Software
15 // Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
17 // See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
20 #include "PartSet_Module.h"
21 #include "PartSet_WidgetSketchLabel.h"
22 #include "PartSet_Validators.h"
23 #include "PartSet_Tools.h"
24 #include "PartSet_PreviewPlanes.h"
25 #include "PartSet_WidgetPoint2d.h"
26 #include "PartSet_WidgetPoint2DFlyout.h"
27 #include "PartSet_WidgetShapeSelector.h"
28 #include "PartSet_WidgetMultiSelector.h"
29 #include "PartSet_WidgetFeaturePointSelector.h"
30 #include "PartSet_WidgetEditor.h"
31 #include "PartSet_WidgetFileSelector.h"
32 #include "PartSet_WidgetSketchCreator.h"
33 #include "PartSet_SketcherMgr.h"
34 #include "PartSet_SketcherReentrantMgr.h"
35 #include "PartSet_ResultSketchPrs.h"
36 #include "PartSet_MenuMgr.h"
37 #include "PartSet_CustomPrs.h"
38 #include "PartSet_IconFactory.h"
39 #include "PartSet_OverconstraintListener.h"
40 #include "PartSet_TreeNodes.h"
41 #include "PartSet_FieldStepPrs.h"
43 #include "PartSet_Filters.h"
44 #include "PartSet_FilterInfinite.h"
50 #include <PartSetPlugin_Remove.h>
51 #include <PartSetPlugin_Part.h>
52 #include <PartSetPlugin_Duplicate.h>
54 #include <SketchPlugin_ConstraintCoincidence.h>
56 #include <ModuleBase_Operation.h>
57 #include <ModuleBase_OperationAction.h>
58 #include <ModuleBase_IViewer.h>
59 #include <ModuleBase_IViewWindow.h>
60 #include <ModuleBase_IPropertyPanel.h>
61 #include <ModuleBase_ISelectionActivate.h>
62 #include <ModuleBase_WidgetChoice.h>
63 #include <ModuleBase_WidgetEditor.h>
64 #include <ModuleBase_WidgetValidated.h>
65 #include <ModuleBase_Tools.h>
66 #include <ModuleBase_OperationFeature.h>
67 #include <ModuleBase_WidgetFactory.h>
68 #include <ModuleBase_OperationDescription.h>
69 #include <ModuleBase_ViewerPrs.h>
70 #include <ModuleBase_ResultPrs.h>
72 #include <ModelAPI_ResultField.h>
73 #include <ModelAPI_Object.h>
74 #include <ModelAPI_Events.h>
75 #include <ModelAPI_Validator.h>
76 #include <ModelAPI_Data.h>
77 #include <ModelAPI_Session.h>
78 #include <ModelAPI_ResultBody.h>
79 #include <ModelAPI_AttributeString.h>
80 #include <ModelAPI_AttributeSelectionList.h>
81 #include <ModelAPI_Tools.h>
82 #include <ModelAPI_ResultConstruction.h>
83 #include <ModelAPI_AttributeIntArray.h>
84 #include <ModelAPI_ResultGroup.h>
86 #include <GeomDataAPI_Point2D.h>
87 #include <GeomDataAPI_Point.h>
88 #include <GeomDataAPI_Dir.h>
90 #include <XGUI_ActiveControlMgr.h>
91 #include <XGUI_ActiveControlSelector.h>
92 #include <XGUI_ActionsMgr.h>
93 #include <XGUI_ContextMenuMgr.h>
94 #include <XGUI_DataModel.h>
95 #include <XGUI_Displayer.h>
96 #include <XGUI_ErrorMgr.h>
97 #include <XGUI_FacesPanelSelector.h>
98 #include <XGUI_ModuleConnector.h>
99 #include <XGUI_ObjectsBrowser.h>
100 #include <XGUI_OperationMgr.h>
101 #include <XGUI_PropertyPanel.h>
102 #include <XGUI_SelectionMgr.h>
103 #include <XGUI_Tools.h>
104 #include <XGUI_Workshop.h>
106 #include <SketchPlugin_ConstraintAngle.h>
107 #include <SketchPlugin_ConstraintLength.h>
108 #include <SketchPlugin_ConstraintDistance.h>
109 #include <SketchPlugin_ConstraintParallel.h>
110 #include <SketchPlugin_ConstraintPerpendicular.h>
111 #include <SketchPlugin_ConstraintRadius.h>
112 #include <SketchPlugin_Feature.h>
113 #include <SketchPlugin_Projection.h>
114 #include <SketchPlugin_Sketch.h>
116 #include <SketcherPrs_SymbolPrs.h>
117 #include <SketcherPrs_PositionMgr.h>
118 #include <SketcherPrs_Coincident.h>
119 #include <SketcherPrs_Tools.h>
121 #include <Events_Loop.h>
122 #include <Config_PropManager.h>
123 #include <Config_Keywords.h>
125 #include <AIS_Dimension.hxx>
126 #include <AIS_InteractiveObject.hxx>
127 #include <StdSelect_TypeOfFace.hxx>
128 #include <TopoDS_Vertex.hxx>
129 #include <TopoDS.hxx>
130 #include <TopoDS_Shape.hxx>
131 #include <BRep_Tool.hxx>
134 #include <QMouseEvent>
137 #include <QApplication>
138 #include <QMessageBox>
139 #include <QMainWindow>
143 #include <GeomAlgoAPI_FaceBuilder.h>
144 #include <GeomDataAPI_Dir.h>
146 #include <SelectMgr_ListIteratorOfListOfFilter.hxx>
148 /*!Create and return new instance of XGUI_Module*/
149 extern "C" PARTSET_EXPORT ModuleBase_IModule* createModule(ModuleBase_IWorkshop* theWshop)
151 return new PartSet_Module(theWshop);
154 //******************************************************
155 PartSet_Module::PartSet_Module(ModuleBase_IWorkshop* theWshop)
156 : ModuleBase_IModule(theWshop),
159 myIsOperationIsLaunched(false)
161 new PartSet_IconFactory(this);
163 mySketchMgr = new PartSet_SketcherMgr(this);
164 mySketchReentrantMgr = new PartSet_SketcherReentrantMgr(theWshop);
166 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(theWshop);
167 XGUI_Workshop* aWorkshop = aConnector->workshop();
169 ModuleBase_IViewer* aViewer = theWshop->viewer();
170 connect(aViewer, SIGNAL(keyRelease(ModuleBase_IViewWindow*, QKeyEvent*)),
171 this, SLOT(onKeyRelease(ModuleBase_IViewWindow*, QKeyEvent*)));
172 connect(aViewer, SIGNAL(viewTransformed(int)),
173 SLOT(onViewTransformed(int)));
174 connect(aViewer, SIGNAL(viewCreated(ModuleBase_IViewWindow*)),
175 SLOT(onViewCreated(ModuleBase_IViewWindow*)));
176 myMenuMgr = new PartSet_MenuMgr(this);
177 myCustomPrs = new PartSet_CustomPrs(theWshop);
179 myOverconstraintListener = new PartSet_OverconstraintListener(theWshop);
181 Events_Loop* aLoop = Events_Loop::loop();
182 aLoop->registerListener(this, Events_Loop::eventByName(EVENT_DOCUMENT_CHANGED));
183 aLoop->registerListener(this, Events_Loop::eventByName(EVENT_OBJECT_TO_REDISPLAY));
185 registerSelectionFilter(SF_GlobalFilter, new PartSet_GlobalFilter(myWorkshop));
186 registerSelectionFilter(SF_FilterInfinite, new PartSet_FilterInfinite(myWorkshop));
187 Handle(PartSet_ResultGroupNameFilter) aCRFilter = new PartSet_ResultGroupNameFilter(myWorkshop);
188 std::set<std::string> aCRGroupNames;
189 aCRGroupNames.insert(ModelAPI_ResultConstruction::group());
190 aCRFilter->setGroupNames(aCRGroupNames);
191 registerSelectionFilter(SF_ResultGroupNameFilter, aCRFilter);
193 setDefaultConstraintShown();
195 //Config_PropManager::registerProp("Visualization", "object_default_color", "Object color",
196 // Config_Prop::Color, "225,225,225");
198 Config_PropManager::registerProp("Visualization", "result_body_color", "Result color",
199 Config_Prop::Color, ModelAPI_ResultBody::DEFAULT_COLOR());
201 Config_PropManager::registerProp("Visualization", "result_group_color", "Group color",
202 Config_Prop::Color, ModelAPI_ResultGroup::DEFAULT_COLOR());
204 Config_PropManager::registerProp("Visualization", "result_construction_color",
205 "Construction color",
207 ModelAPI_ResultConstruction::DEFAULT_COLOR());
209 Config_PropManager::registerProp("Visualization", "result_part_color", "Part color",
210 Config_Prop::Color, ModelAPI_ResultPart::DEFAULT_COLOR());
212 Config_PropManager::registerProp("Visualization", "result_field_color", "Field color",
213 Config_Prop::Color, ModelAPI_ResultField::DEFAULT_COLOR());
215 Config_PropManager::registerProp("Visualization", "operation_parameter_color",
216 "Reference shape wireframe color in operation", Config_Prop::Color,
217 PartSet_CustomPrs::OPERATION_PARAMETER_COLOR());
218 Config_PropManager::registerProp("Visualization", "operation_result_color",
219 "Result shape wireframe color in operation", Config_Prop::Color,
220 PartSet_CustomPrs::OPERATION_RESULT_COLOR());
221 Config_PropManager::registerProp("Visualization", "operation_highlight_color",
222 "Multi selector item color in operation", Config_Prop::Color,
223 PartSet_CustomPrs::OPERATION_HIGHLIGHT_COLOR());
224 Config_PropManager::registerProp("Visualization", "operation_remove_feature_color",
225 "Color of removed feature in operation", Config_Prop::Color,
226 PartSet_CustomPrs::OPERATION_REMOVE_FEATURE_COLOR());
227 Config_PropManager::registerProp("Visualization", "sketch_preview_plane",
228 "Color of sketch plane", Config_Prop::Color,
229 PartSet_CustomPrs::OPERATION_SKETCH_PLANE());
231 Config_PropManager::registerProp("Visualization", "hidden_face_transparency",
232 "Hidden faces transparency",
233 Config_Prop::DblSpin,
235 std::ostringstream aStream;
236 aStream << SketcherPrs_Tools::getDefaultArrowSize();
237 Config_PropManager::registerProp("Visualization", "dimension_arrow_size",
238 "Dimension arrow size", Config_Prop::IntSpin, aStream.str());
240 Config_PropManager::registerProp("Visualization", "dimension_font", "Dimension font",
241 Config_Prop::String, "Times-bold");
245 aStream << SketcherPrs_Tools::getDefaultTextHeight();
246 Config_PropManager::registerProp("Visualization", "dimension_value_size",
247 "Dimension value size", Config_Prop::IntSpin, aStream.str());
249 Config_PropManager::registerProp("Visualization", "sketch_dimension_color",
251 Config_Prop::Color, SKETCH_DIMENSION_COLOR);
254 //******************************************************
255 PartSet_Module::~PartSet_Module()
258 delete myOverconstraintListener;
262 //******************************************************
263 void PartSet_Module::createFeatures()
265 ModuleBase_IModule::createFeatures();
266 myRoot = new PartSet_RootNode();
267 myRoot->setWorkshop(workshop());
271 //******************************************************
272 void PartSet_Module::storeSelection()
274 // cash is used only to restore selection, so it should be filled in storeSelection and
275 // after applying immediatelly cleared in restoreSelection
276 myCurrentSelection.clear();
277 sketchMgr()->storeSelection(PartSet_SketcherMgr::ST_SelectType, myCurrentSelection);
280 //******************************************************
281 void PartSet_Module::restoreSelection()
283 // cash is used only to restore selection, so it should be filled in storeSelection and
284 // after applying immediatelly cleared in restoreSelection
285 sketchMgr()->restoreSelection(myCurrentSelection);
286 myCurrentSelection.clear();
289 //******************************************************
290 void PartSet_Module::registerValidators()
292 //Registering of validators
293 SessionPtr aMgr = ModelAPI_Session::get();
294 ModelAPI_ValidatorsFactory* aFactory = aMgr->validators();
295 aFactory->registerValidator("PartSet_DistanceSelection", new PartSet_DistanceSelection);
296 aFactory->registerValidator("PartSet_LengthSelection", new PartSet_LengthSelection);
297 aFactory->registerValidator("PartSet_PerpendicularSelection", new PartSet_PerpendicularSelection);
298 aFactory->registerValidator("PartSet_ParallelSelection", new PartSet_ParallelSelection);
299 aFactory->registerValidator("PartSet_RadiusSelection", new PartSet_RadiusSelection);
300 aFactory->registerValidator("PartSet_RigidSelection", new PartSet_RigidSelection);
301 aFactory->registerValidator("PartSet_CoincidentSelection", new PartSet_CoincidentSelection);
302 aFactory->registerValidator("PartSet_HVDirSelection", new PartSet_HVDirSelection);
303 aFactory->registerValidator("PartSet_TangentSelection", new PartSet_TangentSelection);
304 aFactory->registerValidator("PartSet_FilletSelection", new PartSet_FilletSelection);
305 aFactory->registerValidator("PartSet_AngleSelection", new PartSet_AngleSelection);
306 aFactory->registerValidator("PartSet_EqualSelection", new PartSet_EqualSelection);
307 aFactory->registerValidator("PartSet_CollinearSelection", new PartSet_CollinearSelection);
308 aFactory->registerValidator("PartSet_MiddlePointSelection", new PartSet_MiddlePointSelection);
309 aFactory->registerValidator("PartSet_DifferentObjects", new PartSet_DifferentObjectsValidator);
310 aFactory->registerValidator("PartSet_DifferentPoints", new PartSet_DifferentPointsValidator);
311 aFactory->registerValidator("PartSet_CoincidentAttr", new PartSet_CoincidentAttr);
312 aFactory->registerValidator("PartSet_MultyTranslationSelection",
313 new PartSet_MultyTranslationSelection);
314 aFactory->registerValidator("PartSet_SplitSelection", new PartSet_SplitSelection);
315 aFactory->registerValidator("PartSet_ProjectionSelection", new PartSet_ProjectionSelection);
316 aFactory->registerValidator("PartSet_IntersectionSelection", new PartSet_IntersectionSelection);
319 //******************************************************
320 void PartSet_Module::connectToPropertyPanel(ModuleBase_ModelWidget* theWidget,
321 const bool isToConnect)
323 mySketchMgr->connectToPropertyPanel(theWidget, isToConnect);
326 //******************************************************
327 void PartSet_Module::operationCommitted(ModuleBase_Operation* theOperation)
329 if (sketchMgr()->isNestedSketchOperation(theOperation)) {
330 mySketchMgr->commitNestedSketch(theOperation);
332 /// deactivate of overconstraint listener should be performed after Sketch commit (#2176)
333 if (PartSet_SketcherMgr::isSketchOperation(theOperation))
334 overconstraintListener()->setActive(false);
336 /// Restart sketcher operations automatically
337 if (!mySketchReentrantMgr->operationCommitted(theOperation)) {
339 ModuleBase_OperationFeature* aFOperation =
340 dynamic_cast<ModuleBase_OperationFeature*>(theOperation);
341 if (aFOperation && !aFOperation->isEditOperation()) {
342 // the selection is cleared after commit the create operation
343 // in order to do not use the same selected objects in the restarted operation
344 // for common behaviour, the selection is cleared even if the operation is not restarted
345 getWorkshop()->selector()->clearSelection();
350 //******************************************************
351 void PartSet_Module::operationAborted(ModuleBase_Operation* theOperation)
353 /// Restart sketcher operations automatically
354 mySketchReentrantMgr->operationAborted(theOperation);
355 /// deactivate of overconstraint listener should be performed after Sketch abort (#2176)
356 if (PartSet_SketcherMgr::isSketchOperation(theOperation))
357 overconstraintListener()->setActive(false);
360 //******************************************************
361 void PartSet_Module::operationStarted(ModuleBase_Operation* theOperation)
363 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>
366 XGUI_Workshop* aWorkshop = XGUI_Tools::workshop(workshop());
367 XGUI_PropertyPanel* aPropertyPanel = aWorkshop->propertyPanel();
369 ModuleBase_ModelWidget* aFilledWidget = 0;
370 bool aPostonedWidgetActivation = false;
372 FeaturePtr aFeature = aFOperation->feature();
373 /// Restart sketcher operations automatically
374 /// it is important to call method of sketch reentrant manager before filling of PP
375 /// because it fills some created feature attributes, these new values should be used
376 /// to fill the property panel
377 mySketchReentrantMgr->operationStarted(theOperation);
379 aWorkshop->fillPropertyPanel(aFOperation);
380 // filling the operation values by the current selection
381 // if the operation can be committed after the controls filling, the method perform should
382 // be stopped. Otherwise unnecessary presentations can be shown(e.g. operation prs in sketch)
383 bool isOperationCommitted = false;
384 if (!aFOperation->isEditOperation()) {
385 std::string aGreedAttributeId = ModuleBase_Tools::findGreedAttribute(workshop(), aFeature);
386 // if there is a greed attribute, automatic commit by preselection
387 // for this feature is prohibited
388 aFilledWidget = aFOperation->activateByPreselection(aGreedAttributeId);
389 if (currentOperation() != aFOperation)
390 isOperationCommitted = true;
392 if (aGreedAttributeId.empty()) {
393 // a signal should be emitted before the next widget activation
394 // because, the activation of the next widget will give a focus to the widget.
395 // As a result the value of the widget is initialized.
396 // And commit may happens until the value is entered.
398 if (mySketchReentrantMgr->canBeCommittedByPreselection())
399 isOperationCommitted = mySketchMgr->operationActivatedByPreselection();
400 // activate the next obligatory widget
401 if (!isOperationCommitted)
402 aPropertyPanel->activateNextWidget(aFilledWidget);
405 else { // there is a greed widget
406 const QList<ModuleBase_ModelWidget*>& aWidgets = aPropertyPanel->modelWidgets();
407 std::string aFirstAttributeId = aWidgets.front()->attributeID();
408 // activate next widget after greeded if it is the first widget in the panel
409 // else the first panel widget is already activated by operation start
410 if (aFirstAttributeId == aGreedAttributeId)
411 aPostonedWidgetActivation = true;
414 } if (!isOperationCommitted) {
415 aWorkshop->connectToPropertyPanel(true);
416 updateSketcherOnStart(aFOperation);
417 updatePresentationsOnStart(aFOperation);
419 // the objects of the current operation should be deactivated
420 QObjectPtrList anObjects;
421 anObjects.append(aFeature);
422 std::list<ResultPtr> aResults;
423 ModelAPI_Tools::allResults(aFeature, aResults);
424 std::list<ResultPtr>::const_iterator aIt;
425 for (aIt = aResults.begin(); aIt != aResults.end(); ++aIt) {
426 anObjects.append(*aIt);
428 QObjectPtrList::const_iterator anIt = anObjects.begin(), aLast = anObjects.end();
429 for (; anIt != aLast; anIt++)
430 aWorkshop->deactivateActiveObject(*anIt, false);
431 if (anObjects.size() > 0) {
432 XGUI_Displayer* aDisplayer = aWorkshop->displayer();
433 aDisplayer->updateViewer();
435 /// state of command actions should be updated after displayed objects modification because
436 /// deactivation(for example) of objects may influence on selection in the viewer
437 /// State of command actions may depend on selection in the viewer(e.g. Sketch)
438 workshop()->updateCommandStatus();
440 if (aPostonedWidgetActivation) {
441 // if the widget is an empty in the chain of activated widgets, the current operation
442 // is restarted. It should be performed after functionality of the operation starting
443 aPropertyPanel->activateNextWidget(aFilledWidget);
448 //******************************************************
449 void PartSet_Module::updateSketcherOnStart(ModuleBase_Operation* theOperation)
451 if (PartSet_SketcherMgr::isSketchOperation(theOperation)) {
452 mySketchMgr->startSketch(theOperation);
454 else if (sketchMgr()->isNestedSketchOperation(theOperation)) {
455 mySketchMgr->startNestedSketch(theOperation);
459 //******************************************************
460 void PartSet_Module::updatePresentationsOnStart(ModuleBase_Operation* theOperation)
462 ModuleBase_OperationFeature* aFOperation =
463 dynamic_cast<ModuleBase_OperationFeature*>(theOperation);
465 myCustomPrs->activate(aFOperation->feature(), ModuleBase_IModule::CustomizeArguments, false);
466 myCustomPrs->activate(aFOperation->feature(), ModuleBase_IModule::CustomizeResults, false);
470 //******************************************************
471 void PartSet_Module::operationResumed(ModuleBase_Operation* theOperation)
473 ModuleBase_IModule::operationResumed(theOperation);
475 ModuleBase_OperationFeature* aFOperation =
476 dynamic_cast<ModuleBase_OperationFeature*>(theOperation);
478 myCustomPrs->activate(aFOperation->feature(), ModuleBase_IModule::CustomizeArguments, false);
479 myCustomPrs->activate(aFOperation->feature(), ModuleBase_IModule::CustomizeResults, false);
483 //******************************************************
484 void PartSet_Module::operationStopped(ModuleBase_Operation* theOperation)
486 bool isModifiedArgs = myCustomPrs->deactivate(ModuleBase_IModule::CustomizeArguments, false);
487 bool isModifiedResults = myCustomPrs->deactivate(ModuleBase_IModule::CustomizeResults, false);
488 bool isModified = isModifiedArgs || isModifiedResults;
490 if (sketchMgr()->isNestedSketchOperation(theOperation)) {
491 mySketchMgr->stopNestedSketch(theOperation);
493 else if (PartSet_SketcherMgr::isSketchOperation(theOperation))
494 setDefaultConstraintShown();
496 //VSV: Viewer is updated on feature update and redisplay
498 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(myWorkshop);
499 XGUI_Displayer* aDisplayer = aConnector->workshop()->displayer();
500 aDisplayer->updateViewer();
503 QMap<PartSet_Tools::ConstraintVisibleState, bool>::const_iterator
504 anIt = myHasConstraintShown.begin(), aLast = myHasConstraintShown.end();
505 for (; anIt != aLast; anIt++) {
506 mySketchMgr->updateBySketchParameters(anIt.key(), anIt.value());
510 //******************************************************
511 ModuleBase_Operation* PartSet_Module::currentOperation() const
513 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
514 XGUI_OperationMgr* anOpMgr = aConnector->workshop()->operationMgr();
515 return anOpMgr->currentOperation();
518 //******************************************************
519 bool PartSet_Module::canUndo() const
521 bool aCanUndo = false;
522 SessionPtr aMgr = ModelAPI_Session::get();
523 if (aMgr->hasModuleDocument() && aMgr->canUndo()) {
524 aCanUndo = !aMgr->isOperation();
525 if (!aCanUndo) // check the enable state additionally by sketch manager
526 aCanUndo = aMgr->canUndo();
531 //******************************************************
532 bool PartSet_Module::canRedo() const
534 bool aCanRedo = false;
535 SessionPtr aMgr = ModelAPI_Session::get();
536 if (aMgr->hasModuleDocument() && aMgr->canRedo()) {
537 aCanRedo = !aMgr->isOperation();
538 if (!aCanRedo) // check the enable state additionally by sketch manager
539 aCanRedo = aMgr->canRedo();
544 //******************************************************
545 bool PartSet_Module::canApplyAction(const ObjectPtr& theObject, const QString& theActionId) const
548 if (theActionId == "MOVE_CMD") {
549 FeaturePtr aFeature = ModelAPI_Feature::feature(theObject);
551 ResultPtr aResult = ModuleBase_Tools::firstResult(aFeature);
552 // part features can not be moved in the history.
553 if (aResult.get() && aResult->groupName() == ModelAPI_ResultPart::group())
560 //******************************************************
561 bool PartSet_Module::canEraseObject(const ObjectPtr& theObject) const
563 // the sketch manager put the restriction to the objects erase
564 return mySketchMgr->canEraseObject(theObject);
567 //******************************************************
568 bool PartSet_Module::canDisplayObject(const ObjectPtr& theObject) const
570 // the sketch manager put the restriction to the objects display
571 return mySketchMgr->canDisplayObject(theObject);
574 //******************************************************
575 bool PartSet_Module::canUsePreselection(const QString& thePreviousOperationKind,
576 const QString& theStartedOperationKind)
578 if (ModuleBase_IModule::canUsePreselection(thePreviousOperationKind, theStartedOperationKind))
581 return mySketchMgr->isNestedSketchFeature(theStartedOperationKind);
584 /*void PartSet_Module::processHiddenObject(const std::list<ObjectPtr>& theObjects)
586 mySketchMgr->processHiddenObject(theObjects);
589 //******************************************************
590 bool PartSet_Module::canActivateSelection(const ObjectPtr& theObject) const
592 bool aCanActivate = ModuleBase_IModule::canActivateSelection(theObject);
594 ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
595 bool isSketchOp = PartSet_SketcherMgr::isSketchOperation(anOperation),
596 isNestedOp = sketchMgr()->isNestedSketchOperation(anOperation);
597 if (isSketchOp || isNestedOp) {
598 // in active sketch operation it is possible to activate operation object in selection
599 // in the edit operation, e.g. points of the line can be moved when the line is edited
600 ModuleBase_OperationFeature* aFOperation =
601 dynamic_cast<ModuleBase_OperationFeature*>(anOperation);
602 aCanActivate = aCanActivate || (aFOperation && aFOperation->isEditOperation());
607 //******************************************************
608 bool PartSet_Module::addViewerMenu(const QMap<QString, QAction*>& theStdActions,
610 QMap<int, QAction*>& theMenuActions) const
612 return myMenuMgr->addViewerMenu(theStdActions, theParent, theMenuActions);
615 //******************************************************
616 void PartSet_Module::updateViewerMenu(const QMap<QString, QAction*>& theStdActions)
618 myMenuMgr->updateViewerMenu(theStdActions);
621 //******************************************************
622 bool PartSet_Module::isActionEnableStateFixed(const int theActionId) const
624 bool isEnabledFixed = false;
625 if (theActionId == XGUI_ActionsMgr::AcceptAll &&
626 mySketchReentrantMgr->isInternalEditActive())
627 isEnabledFixed = true;
628 return isEnabledFixed;
631 //******************************************************
632 QString PartSet_Module::getFeatureError(const FeaturePtr& theFeature)
634 QString anError = ModuleBase_IModule::getFeatureError(theFeature);
635 if (anError.isEmpty())
636 anError = sketchMgr()->getFeatureError(theFeature);
641 //******************************************************
642 void PartSet_Module::grantedOperationIds(ModuleBase_Operation* theOperation,
643 QStringList& theIds) const
645 myMenuMgr->grantedOperationIds(theOperation, theIds);
647 if (PartSet_SketcherMgr::isSketchOperation(theOperation)) {
648 XGUI_Workshop* aWorkshop = getWorkshop();
649 theIds.append(aWorkshop->contextMenuMgr()->action("DELETE_CMD")->text());
653 //******************************************************
654 void PartSet_Module::activeSelectionModes(QIntList& theModes)
656 if (mySketchMgr->activeSketch().get())
657 PartSet_SketcherMgr::sketchSelectionModes(mySketchMgr->activeSketch(), theModes);
659 theModes = XGUI_Tools::workshop(myWorkshop)->viewerSelectionModes();
662 //******************************************************
663 void PartSet_Module::moduleSelectionModes(int theModesType, QIntList& theModes)
665 customSubShapesSelectionModes(theModes);
666 //theModes.append(XGUI_Tools::workshop(myWorkshop)->viewerSelectionModes());
667 //myWorkshop->module()->activeSelectionModes(theModes);
670 //******************************************************
671 void PartSet_Module::moduleSelectionFilters(const QIntList& theFilterTypes,
672 SelectMgr_ListOfFilter& theSelectionFilters)
674 bool isSketchActive = mySketchMgr->activeSketch().get();
676 std::map<ModuleBase_SelectionFilterType, Handle(SelectMgr_Filter)>::const_iterator aFiltersIt =
677 mySelectionFilters.begin();
678 for (; aFiltersIt != mySelectionFilters.end(); aFiltersIt++) {
679 int aFilterType = aFiltersIt->first;
680 // do not add not participating filters in given parameters
681 if (!theFilterTypes.contains(aFilterType))
684 // using sketch filters only if sketch operation is active
685 if (!isSketchActive &&
686 mySketchMgr->sketchSelectionFilter((ModuleBase_SelectionFilterType)aFilterType))
689 // using filtering of construction results only from faces panel
690 if (aFilterType == SF_ResultGroupNameFilter)
693 theSelectionFilters.Append(aFiltersIt->second);
697 //******************************************************
698 void PartSet_Module::customSubShapesSelectionModes(QIntList& theModes)
700 if (theModes.contains(TopAbs_FACE))
701 theModes.append(SketcherPrs_Tools::Sel_Sketch_Face);
702 if (theModes.contains(TopAbs_WIRE))
703 theModes.append(SketcherPrs_Tools::Sel_Sketch_Wire);
705 if (mySketchMgr->activeSketch().get())
706 PartSet_SketcherMgr::sketchSelectionModes(mySketchMgr->activeSketch(), theModes);
709 //******************************************************
710 void PartSet_Module::getGeomSelection(const std::shared_ptr<ModuleBase_ViewerPrs>& theSelected,
711 ObjectPtr& theObject, AttributePtr& theAttribute)
713 ObjectPtr anObject = theSelected->object();
714 GeomShapePtr aShape = theSelected->shape();
716 theAttribute = findAttribute(anObject, aShape);
717 // TODO: try to create result if object is an external object
718 theObject = anObject;
721 //******************************************************
722 bool PartSet_Module::isMouseOverWindow()
724 return mySketchMgr->isMouseOverWindow();
727 //******************************************************
728 bool PartSet_Module::isSketchNeutralPointActivated() const
730 bool isNeutralPoint = true;
731 if (sketchReentranceMgr()->isInternalEditActive())
732 isNeutralPoint = false;
733 if (myIsOperationIsLaunched)
734 isNeutralPoint = false;
736 return isNeutralPoint;
739 //******************************************************
740 void PartSet_Module::closeDocument()
742 myActivePartIndex = QModelIndex();
743 SketcherPrs_PositionMgr::get()->clearAll();
746 //******************************************************
747 void PartSet_Module::clearViewer()
749 myCustomPrs->clearPrs();
751 XGUI_Workshop* aWorkshop = getWorkshop();
752 XGUI_Displayer* aDisplayer = aWorkshop->displayer();
753 aDisplayer->deactivateSelectionFilters(false);
756 //******************************************************
757 void PartSet_Module::propertyPanelDefined(ModuleBase_Operation* theOperation)
759 ModuleBase_OperationFeature* aFOperation =
760 dynamic_cast<ModuleBase_OperationFeature*>(theOperation);
764 ModuleBase_IPropertyPanel* aPanel = aFOperation->propertyPanel();
765 // we have to manually activate the sketch label in edit mode
766 if (PartSet_SketcherMgr::isSketchOperation(aFOperation) && (aFOperation->isEditOperation()))
767 aPanel->activateWidget(aPanel->modelWidgets().first());
770 //******************************************************
771 bool PartSet_Module::createWidgets(ModuleBase_Operation* theOperation,
772 QList<ModuleBase_ModelWidget*>& theWidgets) const
774 bool aProcessed = false;
776 ModuleBase_OperationFeature* aFOperation =
777 dynamic_cast<ModuleBase_OperationFeature*>(theOperation);
778 XGUI_Workshop* aWorkshop = getWorkshop();
779 XGUI_PropertyPanel* aPropertyPanel = aWorkshop->propertyPanel();
780 if (mySketchMgr->activeSketch().get() && aFOperation && aPropertyPanel) {
781 ModuleBase_ISelection* aSelection = workshop()->selection();
782 // click on a point in sketch leads here with the point is highlighted, not yet selected
783 QList<ModuleBase_ViewerPrsPtr> aPreselection = aSelection->getHighlighted();
784 if (aPreselection.size() == 1) {
785 ModuleBase_ViewerPrsPtr aSelectedPrs = aPreselection[0];
786 ObjectPtr anObject = aSelectedPrs->object();
788 FeaturePtr aFeature = ModelAPI_Feature::feature(anObject);
789 FeaturePtr anOpFeature = aFOperation->feature();
790 GeomShapePtr aShape = aSelectedPrs->shape();
791 // click on the digit of dimension constrain comes here
792 // with an empty shape, so we need the check
793 if (aFeature == anOpFeature && aShape.get() && !aShape->isNull()) {
794 // if feature has only one result and shape of result is equal to selected shape
795 // this attribute is not processed. It is a case of Sketch Point.
796 if (aFeature->results().size() == 1) {
797 ResultPtr aResult = aFeature->results().front();
798 if (aResult.get() && aResult->shape()->isEqual(aShape))
801 const TopoDS_Shape& aTDShape = aShape->impl<TopoDS_Shape>();
802 AttributePtr anAttribute = PartSet_Tools::findAttributeBy2dPoint(anObject, aTDShape,
803 mySketchMgr->activeSketch());
804 if (anAttribute.get()) {
805 QString aXmlRepr = aFOperation->getDescription()->xmlRepresentation();
806 ModuleBase_WidgetFactory aFactory(aXmlRepr.toStdString(), workshop());
808 const std::string anAttributeId = anAttribute->id();
809 aFactory.createWidget(aPropertyPanel->contentWidget(), anAttributeId);
811 theWidgets = aFactory.getModelWidgets();
812 // it is possible that the point does not present in XML definition,
813 // in this case, we assume that it is not processed by this module
814 // e.g. "Intersection point" feature
815 aProcessed = !theWidgets.isEmpty();
823 //******************************************************
824 void PartSet_Module::onSelectionChanged()
826 ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
830 bool isSketcherOp = false;
831 // An edit operation is enable only if the current opeation is the sketch operation
832 if (mySketchMgr->activeSketch()) {
833 if (PartSet_Tools::sketchPlane(mySketchMgr->activeSketch()))
834 isSketcherOp = PartSet_SketcherMgr::isSketchOperation(aOperation);
837 // Editing of constraints can be done on selection
838 ModuleBase_ISelection* aSelect = myWorkshop->selection();
839 QList<ModuleBase_ViewerPrsPtr> aSelected = aSelect->getSelected();
840 if (aSelected.size() == 1) {
841 ModuleBase_ViewerPrsPtr aPrs = aSelected.first();
842 ObjectPtr aObject = aPrs->object();
843 FeaturePtr aFeature = ModelAPI_Feature::feature(aObject);
845 std::string aId = aFeature->getKind();
846 if ((aId == SketchPlugin_ConstraintRadius::ID()) ||
847 (aId == SketchPlugin_ConstraintLength::ID()) ||
848 (aId == SketchPlugin_ConstraintDistance::ID()) ||
849 (aId == SketchPlugin_ConstraintAngle::ID())) {
850 editFeature(aFeature);
857 //******************************************************
858 void PartSet_Module::onKeyRelease(ModuleBase_IViewWindow* theWnd, QKeyEvent* theEvent)
860 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
861 XGUI_OperationMgr* anOpMgr = aConnector->workshop()->operationMgr();
862 anOpMgr->onKeyReleased(theWnd->viewPort(), theEvent);
865 //******************************************************
866 ModuleBase_ModelWidget* PartSet_Module::createWidgetByType(const std::string& theType,
868 Config_WidgetAPI* theWidgetApi)
870 ModuleBase_IWorkshop* aWorkshop = workshop();
871 XGUI_Workshop* aXUIWorkshop = getWorkshop();
872 ModuleBase_ModelWidget* aWgt = NULL;
873 if (theType == "sketch-start-label") {
874 PartSet_WidgetSketchLabel* aLabelWgt = new PartSet_WidgetSketchLabel(theParent, aWorkshop,
875 theWidgetApi, myHasConstraintShown);
876 connect(aLabelWgt, SIGNAL(planeSelected(const std::shared_ptr<GeomAPI_Pln>&)),
877 mySketchMgr, SLOT(onPlaneSelected(const std::shared_ptr<GeomAPI_Pln>&)));
878 connect(aLabelWgt, SIGNAL(showConstraintToggled(int, bool)),
879 mySketchMgr, SLOT(onShowConstraintsToggle(int, bool)));
880 connect(aLabelWgt, SIGNAL(showFreePoints(bool)), mySketchMgr, SLOT(onShowPoints(bool)));
881 connect(aLabelWgt, SIGNAL(autoConstraints(bool)),
882 sketchReentranceMgr(), SLOT(onAutoConstraints(bool)));
883 aLabelWgt->setShowPointsState(mySketchMgr->isShowFreePointsShown());
885 } else if (theType == "sketch-2dpoint_selector") {
886 PartSet_WidgetPoint2D* aPointWgt = new PartSet_WidgetPoint2D(theParent, aWorkshop,
888 aPointWgt->setSketch(mySketchMgr->activeSketch());
889 connect(aPointWgt, SIGNAL(vertexSelected()), sketchReentranceMgr(), SLOT(onVertexSelected()));
891 }else if (theType == "sketch-2dpoint_flyout_selector") {
892 PartSet_WidgetPoint2DFlyout* aPointWgt = new PartSet_WidgetPoint2DFlyout(theParent, aWorkshop,
894 aPointWgt->setSketch(mySketchMgr->activeSketch());
895 connect(aPointWgt, SIGNAL(vertexSelected()), sketchReentranceMgr(), SLOT(onVertexSelected()));
897 } else if (theType == "sketch_shape_selector") {
898 PartSet_WidgetShapeSelector* aShapeSelectorWgt =
899 new PartSet_WidgetShapeSelector(theParent, aWorkshop, theWidgetApi);
900 aShapeSelectorWgt->setSketcher(mySketchMgr->activeSketch());
901 aWgt = aShapeSelectorWgt;
902 } else if (theType == "sketch_multi_selector") {
903 PartSet_WidgetMultiSelector* aShapeSelectorWgt =
904 new PartSet_WidgetMultiSelector(theParent, aWorkshop, theWidgetApi);
905 aShapeSelectorWgt->setSketcher(mySketchMgr->activeSketch());
906 aWgt = aShapeSelectorWgt;
908 else if (theType == "sketch_feature_point_selector") {
909 PartSet_WidgetFeaturePointSelector* aPointSelectorWgt =
910 new PartSet_WidgetFeaturePointSelector(theParent, aWorkshop, theWidgetApi);
911 aPointSelectorWgt->setSketcher(mySketchMgr->activeSketch());
912 aWgt = aPointSelectorWgt;
914 else if (theType == WDG_DOUBLEVALUE_EDITOR) {
915 aWgt = new PartSet_WidgetEditor(theParent, aWorkshop, theWidgetApi);
916 } else if (theType == "export_file_selector") {
917 aWgt = new PartSet_WidgetFileSelector(theParent, aWorkshop, theWidgetApi);
918 } else if (theType == "sketch_launcher") {
919 aWgt = new PartSet_WidgetSketchCreator(theParent, this, theWidgetApi);
920 } else if (theType == "module_choice") {
921 aWgt = new ModuleBase_WidgetChoice(theParent, theWidgetApi);
922 connect(aWgt, SIGNAL(itemSelected(ModuleBase_ModelWidget*, int)),
923 this, SLOT(onChoiceChanged(ModuleBase_ModelWidget*, int)));
928 //******************************************************
929 ModuleBase_ModelWidget* PartSet_Module::activeWidget() const
931 ModuleBase_ModelWidget* anActiveWidget = 0;
933 ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
935 return anActiveWidget;
937 ModuleBase_IPropertyPanel* aPanel = aOperation->propertyPanel();
939 return anActiveWidget;
941 return aPanel->activeWidget(true);
944 //******************************************************
945 bool PartSet_Module::deleteObjects()
947 bool isProcessed = false;
949 XGUI_Workshop* aWorkshop = getWorkshop();
950 XGUI_OperationMgr* anOpMgr = aWorkshop->operationMgr();
952 //SessionPtr aMgr = ModelAPI_Session::get();
953 // 1. check whether the delete should be processed in the module
954 ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
955 bool isSketchOp = PartSet_SketcherMgr::isSketchOperation(anOperation),
956 isNestedOp = sketchMgr()->isNestedSketchOperation(anOperation);
957 if (isSketchOp || isNestedOp) {
959 // 2. find selected presentations
960 // selected objects should be collected before the current operation abort because
961 // the abort leads to selection lost on constraint objects. It can be corrected after #386 issue
962 ModuleBase_ISelection* aSel = workshop()->selection();
963 QObjectPtrList aSelectedObj = aSel->selectedPresentations();
964 // if there are no selected objects in the viewer, that means that the selection in another
965 // place cased this method. It is necessary to return the false value to understande in above
966 // method that delete is not processed
967 if (aSelectedObj.count() == 0)
970 // avoid delete of the objects, which are not belong to the current sketch
971 // in order to do not delete results of other sketches
972 QObjectPtrList aSketchObjects;
973 QObjectPtrList::const_iterator anIt = aSelectedObj.begin(), aLast = aSelectedObj.end();
974 for ( ; anIt != aLast; anIt++) {
975 ObjectPtr anObject = *anIt;
976 if (mySketchMgr->isObjectOfSketch(anObject)) {
977 // sketch feature should be used in this list because workshop deletes features only
978 // results are skipped
979 FeaturePtr aSketchFeature = ModelAPI_Feature::feature(anObject);
980 aSketchObjects.append(aSketchFeature);
983 // if the selection contains only local selected presentations from other sketches,
984 // the Delete operation should not be done at all
985 if (aSketchObjects.size() == 0)
988 // 3. start operation
989 QString aDescription = aWorkshop->contextMenuMgr()->action("DELETE_CMD")->text();
990 ModuleBase_OperationAction* anOpAction = new ModuleBase_OperationAction(aDescription, this);
992 // the active nested sketch operation should be aborted unconditionally
993 // the Delete action should be additionally granted for the Sketch operation
994 // in order to do not abort/commit it
996 if (!anOpMgr->canStartOperation(anOpAction->id(), isCommitted))
997 return true; // the objects are processed but can not be deleted
999 anOpMgr->startOperation(anOpAction);
1001 // WORKAROUND, should be done to avoid viewer highlight update after deletetion of objects
1002 // the problem is in AIS Dimensions recompute
1003 // if a line and the dim are removed, line is the first
1004 // it causes the AIS recompute, where the base line is null,
1005 // the result is empty AIS in the viewer
1006 XGUI_Tools::workshop(myWorkshop)->selector()->clearSelection();
1008 // 4. delete features
1009 // sketch feature should be skipped, only sub-features can be removed
1010 // when sketch operation is active
1011 aWorkshop->deleteFeatures(aSketchObjects);
1012 // 5. stop operation
1013 anOpMgr->commitOperation();
1018 //******************************************************
1019 void PartSet_Module::editFeature(FeaturePtr theFeature)
1021 storeConstraintsState(theFeature->getKind());
1022 ModuleBase_IModule::editFeature(theFeature);
1025 //******************************************************
1026 bool PartSet_Module::canCommitOperation() const
1031 //******************************************************
1032 void PartSet_Module::launchOperation(const QString& theCmdId, const bool& isStartAfterCommitOnly)
1034 myIsOperationIsLaunched = true;
1035 storeConstraintsState(theCmdId.toStdString());
1036 updateConstraintsState(theCmdId.toStdString());
1038 ModuleBase_IModule::launchOperation(theCmdId, isStartAfterCommitOnly);
1040 myIsOperationIsLaunched = false;
1043 //******************************************************
1044 void PartSet_Module::storeConstraintsState(const std::string& theFeatureKind)
1046 if (myWorkshop->currentOperation() &&
1047 myWorkshop->currentOperation()->id().toStdString() == SketchPlugin_Sketch::ID()) {
1048 const QMap<PartSet_Tools::ConstraintVisibleState, bool>& aShownStates =
1049 mySketchMgr->showConstraintStates();
1050 myHasConstraintShown = aShownStates;
1054 //******************************************************
1055 void PartSet_Module::updateConstraintsState(const std::string& theFeatureKind)
1057 if (PartSet_SketcherMgr::constraintsIdList().contains(theFeatureKind.c_str()) ||
1058 PartSet_SketcherMgr::replicationsIdList().contains(theFeatureKind.c_str())) {
1059 // Show constraints if a constraint was anOperation
1060 mySketchMgr->updateBySketchParameters(PartSet_Tools::Geometrical, true);
1061 mySketchMgr->updateBySketchParameters(PartSet_Tools::Dimensional, true);
1062 mySketchMgr->updateBySketchParameters(PartSet_Tools::Expressions,
1063 myHasConstraintShown[PartSet_Tools::Expressions]);
1067 //******************************************************
1068 void PartSet_Module::onObjectDisplayed(ObjectPtr theObject, AISObjectPtr theAIS)
1070 Handle(AIS_InteractiveObject) anAIS = theAIS->impl<Handle(AIS_InteractiveObject)>();
1071 if (!anAIS.IsNull()) {
1072 FeaturePtr aFeature = ModelAPI_Feature::feature(theObject);
1073 if (aFeature.get()) {
1074 bool aToUseZLayer = false;
1075 if (PartSet_Tools::findRefsToMeFeature(aFeature,SketchPlugin_Projection::ID()))
1076 aToUseZLayer = true;
1078 CompositeFeaturePtr aParent = ModelAPI_Tools::compositeOwner(aFeature);
1079 aToUseZLayer = (aParent.get() && (aParent->getKind() == SketchPlugin_Sketch::ID()));
1082 Handle(AIS_InteractiveContext) aCtx = anAIS->GetContext();
1083 if (aFeature->getKind() == SketchPlugin_ConstraintCoincidence::ID())
1084 aCtx->SetZLayer(anAIS, Graphic3d_ZLayerId_Top);
1086 aCtx->SetZLayer(anAIS, myVisualLayerId);
1092 //******************************************************
1093 void PartSet_Module::onBeforeObjectErase(ObjectPtr theObject, AISObjectPtr theAIS)
1096 // it should be recomputed in order to disappear in the viewer if the corresponded object
1098 //if (myCustomPrs->isActive())
1099 // myCustomPrs->redisplay(theObject, false);
1102 //******************************************************
1103 void PartSet_Module::onViewTransformed(int theTrsfType)
1105 // Set length of arrows constant in pixel size
1106 // if the operation is panning or rotate or panglobal then do nothing
1107 if ((theTrsfType == 1) || (theTrsfType == 3) || (theTrsfType == 4))
1109 ModuleBase_IViewer* aViewer = myWorkshop->viewer();
1110 Handle(AIS_InteractiveContext) aContext = aViewer->AISContext();
1111 if (aContext.IsNull())
1114 //Handle(V3d_View) aView = aViewer->activeView();
1116 XGUI_Workshop* aWorkshop = getWorkshop();
1117 XGUI_Displayer* aDisplayer = aWorkshop->displayer();
1118 Handle(V3d_Viewer) aV3dViewer = aContext->CurrentViewer();
1119 Handle(V3d_View) aView;
1121 for (aV3dViewer->InitDefinedViews();
1122 aV3dViewer->MoreDefinedViews();
1123 aV3dViewer->NextDefinedViews()) {
1124 Handle(V3d_View) aV = aV3dViewer->DefinedView();
1125 double aS = aV->Scale();
1134 bool isModified = false;
1135 ModuleBase_Operation* aCurrentOperation = myWorkshop->currentOperation();
1136 if (aCurrentOperation &&
1137 (PartSet_SketcherMgr::isSketchOperation(aCurrentOperation) ||
1138 sketchMgr()->isNestedSketchOperation(aCurrentOperation) ||
1139 (aCurrentOperation->id() == "Measurement")))
1141 double aLen = aView->Convert(SketcherPrs_Tools::getConfigArrowSize());
1143 double aPrevLen = SketcherPrs_Tools::getArrowSize();
1144 SketcherPrs_Tools::setArrowSize(aLen);
1145 const double aCurScale = aViewer->activeView()->Camera()->Scale();
1146 aViewer->SetScale(aViewer->activeView(), aCurScale);
1148 QList<Handle(AIS_InteractiveObject)> aPrsList = aDisplayer->displayedPresentations();
1149 foreach(Handle(AIS_InteractiveObject) aAisObj, aPrsList) {
1151 QList<AISObjectPtr> aPrsList = aDisplayer->displayedPresentations();
1152 foreach(AISObjectPtr aAIS, aPrsList) {
1153 Handle(AIS_InteractiveObject) aAisObj = aAIS->impl<Handle(AIS_InteractiveObject)>();
1155 Handle(AIS_Dimension) aDim = Handle(AIS_Dimension)::DownCast(aAisObj);
1156 if (!aDim.IsNull()) {
1157 aDim->DimensionAspect()->ArrowAspect()->SetLength(aLen);
1158 aContext->Redisplay(aDim, false);
1163 aDisplayer->updateViewer();
1168 //******************************************************
1169 bool PartSet_Module::isCustomPrsActivated(const ModuleBase_CustomizeFlag& theFlag) const
1171 return myCustomPrs->isActive(theFlag);
1174 //******************************************************
1175 void PartSet_Module::activateCustomPrs(const FeaturePtr& theFeature,
1176 const ModuleBase_CustomizeFlag& theFlag,
1177 const bool theUpdateViewer)
1179 myCustomPrs->activate(theFeature, theFlag, theUpdateViewer);
1182 //******************************************************
1183 void PartSet_Module::deactivateCustomPrs(const ModuleBase_CustomizeFlag& theFlag,
1184 const bool theUpdateViewer)
1186 myCustomPrs->deactivate(theFlag, theUpdateViewer);
1189 //******************************************************
1190 //bool PartSet_Module::customisePresentation(ResultPtr theResult, AISObjectPtr thePrs,
1191 // std::shared_ptr<GeomAPI_ICustomPrs> theCustomPrs)
1193 // bool aCustomized = false;
1195 // XGUI_Workshop* aWorkshop = getWorkshop();
1196 // XGUI_Displayer* aDisplayer = aWorkshop->displayer();
1197 // ObjectPtr anObject = aDisplayer->getObject(thePrs);
1199 // return aCustomized;
1201 // if (!theResult.get()) {
1202 // std::vector<int> aColor;
1203 // XGUI_CustomPrs::getDefaultColor(anObject, true, aColor);
1204 // if (!aColor.empty()) {
1205 // aCustomized = thePrs->setColor(aColor[0], aColor[1], aColor[2]);
1208 // // customize dimentional constrains
1209 // sketchMgr()->customisePresentation(anObject);
1211 // return aCustomized;
1214 ////******************************************************
1215 //bool PartSet_Module::afterCustomisePresentation(std::shared_ptr<ModelAPI_Result> theResult,
1216 // AISObjectPtr thePrs,
1217 // GeomCustomPrsPtr theCustomPrs)
1219 // bool aCustomized = false;
1221 // XGUI_Workshop* aWorkshop = getWorkshop();
1222 // XGUI_Displayer* aDisplayer = aWorkshop->displayer();
1223 // ObjectPtr anObject = aDisplayer->getObject(thePrs);
1225 // return aCustomized;
1227 // std::vector<int> aColor;
1228 // bool aUseCustomColor = true;
1229 // if (aUseCustomColor)
1230 // myOverconstraintListener->getCustomColor(anObject, aColor);
1231 // // customize sketch symbol presentation
1232 // Handle(AIS_InteractiveObject) anAISIO = thePrs->impl<Handle(AIS_InteractiveObject)>();
1233 // if (!anAISIO.IsNull()) {
1234 // if (!Handle(SketcherPrs_SymbolPrs)::DownCast(anAISIO).IsNull()) {
1235 // Handle(SketcherPrs_SymbolPrs) aPrs = Handle(SketcherPrs_SymbolPrs)::DownCast(anAISIO);
1236 // if (!aPrs.IsNull()) {
1237 // aPrs->SetCustomColor(aColor);
1238 // aCustomized = true;
1240 // } else if (!Handle(SketcherPrs_Coincident)::DownCast(anAISIO).IsNull()) {
1241 // Handle(SketcherPrs_Coincident) aPrs = Handle(SketcherPrs_Coincident)::DownCast(anAISIO);
1242 // if (!aPrs.IsNull()) {
1243 // aPrs->SetCustomColor(aColor);
1244 // aCustomized = true;
1248 // // customize sketch dimension constraint presentation
1249 // if (!aCustomized) {
1250 // if (!aColor.empty()) { // otherwise presentation has the default color
1251 // aCustomized = thePrs->setColor(aColor[0], aColor[1], aColor[2]);
1254 // return aCustomized;
1257 //******************************************************
1258 bool PartSet_Module::customizeFeature(ObjectPtr theObject, const ModuleBase_CustomizeFlag& theFlag,
1259 const bool theUpdateViewer)
1261 bool isRedisplayed = false;
1262 if (myCustomPrs->isActive(theFlag))
1263 isRedisplayed = myCustomPrs->redisplay(theObject, theFlag, theUpdateViewer);
1265 return isRedisplayed;
1268 //******************************************************
1269 void PartSet_Module::customizeObjectBrowser(QWidget* theObjectBrowser)
1271 XGUI_ObjectsBrowser* aOB = dynamic_cast<XGUI_ObjectsBrowser*>(theObjectBrowser);
1273 QLabel* aLabel = aOB->activeDocLabel();
1274 aLabel->installEventFilter(myMenuMgr);
1275 connect(aLabel, SIGNAL(customContextMenuRequested(const QPoint&)),
1276 SLOT(onActiveDocPopup(const QPoint&)));
1277 aOB->treeView()->setExpandsOnDoubleClick(false);
1278 connect(aOB->treeView(), SIGNAL(doubleClicked(const QModelIndex&)),
1279 SLOT(onTreeViewDoubleClick(const QModelIndex&)));
1281 Events_Loop* aLoop = Events_Loop::loop();
1282 aLoop->registerListener(this, Events_Loop::eventByName(EVENT_OBJECT_CREATED));
1286 //******************************************************
1287 void PartSet_Module::onActiveDocPopup(const QPoint& thePnt)
1289 SessionPtr aMgr = ModelAPI_Session::get();
1290 QAction* aActivatePartAction = myMenuMgr->action("ACTIVATE_PARTSET_CMD");
1292 XGUI_Workshop* aWorkshop = getWorkshop();
1293 QLabel* aHeader = aWorkshop->objectBrowser()->activeDocLabel();
1295 aActivatePartAction->setEnabled((aMgr->activeDocument() != aMgr->moduleDocument()));
1298 aMenu.addAction(aActivatePartAction);
1299 aMenu.exec(aHeader->mapToGlobal(thePnt));
1302 //******************************************************
1303 AISObjectPtr PartSet_Module::createPresentation(const ObjectPtr& theObject)
1305 Handle(AIS_InteractiveObject) anAISPrs = mySketchMgr->createPresentation(theObject);
1306 if (anAISPrs.IsNull()) {
1307 ResultPtr aResult = std::dynamic_pointer_cast<ModelAPI_Result>(theObject);
1308 if (aResult.get()) {
1309 std::shared_ptr<GeomAPI_Shape> aShapePtr = ModelAPI_Tools::shape(aResult);
1310 if (aShapePtr.get() != NULL)
1311 anAISPrs = new ModuleBase_ResultPrs(aResult);
1314 FieldStepPtr aStep =
1315 std::dynamic_pointer_cast<ModelAPI_ResultField::ModelAPI_FieldStep>(theObject);
1317 anAISPrs = new PartSet_FieldStepPrs(aStep);
1322 if (!anAISPrs.IsNull()) {
1323 Handle(AIS_Shape) aShapePrs = Handle(AIS_Shape)::DownCast(anAISPrs);
1324 if (!aShapePrs.IsNull())
1325 ModuleBase_Tools::setPointBallHighlighting((AIS_Shape*)aShapePrs.get());
1327 anAIS = AISObjectPtr(new GeomAPI_AISObject());
1328 anAIS->setImpl(new Handle(AIS_InteractiveObject)(anAISPrs));
1329 customizePresentation(theObject, anAIS);
1334 //******************************************************
1335 void getResultColor(const ResultPtr& theResult, std::vector<int>& theColor)
1337 ModelAPI_Tools::getColor(theResult, theColor);
1338 if (theColor.empty())
1339 PartSet_Tools::getDefaultColor(theResult, false, theColor);
1342 //******************************************************
1343 double getResultDeflection(const ResultPtr& theResult)
1345 double aDeflection = ModelAPI_Tools::getDeflection(theResult);
1346 if (aDeflection < 0)
1347 aDeflection = PartSet_Tools::getDefaultDeflection(theResult);
1351 //******************************************************
1352 double getResultTransparency(const ResultPtr& theResult)
1354 double aTransparency = ModelAPI_Tools::getTransparency(theResult);
1355 if (aTransparency < 0)
1356 aTransparency = PartSet_Tools::getDefaultTransparency();
1357 return aTransparency;
1361 //******************************************************
1362 void PartSet_Module::customizePresentation(const ObjectPtr& theObject, const AISObjectPtr& thePrs) const
1364 if (mySketchMgr->isSketchStarted()) {
1365 mySketchMgr->customizeSketchPresentation(theObject, thePrs);
1368 ResultPtr aResult = std::dynamic_pointer_cast<ModelAPI_Result>(theObject);
1369 if (aResult.get()) {
1370 std::vector<int> aColor;
1371 getResultColor(aResult, aColor);
1373 SessionPtr aMgr = ModelAPI_Session::get();
1374 if (aMgr->activeDocument() != aResult->document()) {
1375 QColor aQColor(aColor[0], aColor[1], aColor[2]);
1377 QColor::fromHsvF(aQColor.hueF(), aQColor.saturationF() / 3., aQColor.valueF());
1378 aColor[0] = aNewColor.red();
1379 aColor[1] = aNewColor.green();
1380 aColor[2] = aNewColor.blue();
1382 thePrs->setColor(aColor[0], aColor[1], aColor[2]);
1384 thePrs->setDeflection(getResultDeflection(aResult));
1386 thePrs->setTransparency(getResultTransparency(aResult));
1388 FeaturePtr aFeature = ModelAPI_Feature::feature(theObject);
1389 if (aFeature.get()) {
1390 if (aFeature->getKind() == SketchPlugin_Sketch::ID())
1391 thePrs->setWidth(2);
1397 //******************************************************
1398 ObjectPtr PartSet_Module::findPresentedObject(const AISObjectPtr& theAIS) const
1401 ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
1403 /// If last line finished on vertex the lines creation sequence has to be break
1404 ModuleBase_IPropertyPanel* aPanel = aOperation->propertyPanel();
1406 ModuleBase_ModelWidget* anActiveWidget = aPanel->activeWidget();
1407 // if there is an active widget, find the presented object in it
1408 if (!anActiveWidget)
1409 anActiveWidget = aPanel->preselectionWidget();
1411 ModuleBase_WidgetValidated* aWidgetValidated = dynamic_cast<ModuleBase_WidgetValidated*>
1413 if (aWidgetValidated)
1414 anObject = aWidgetValidated->findPresentedObject(theAIS);
1420 //******************************************************
1421 bool PartSet_Module::canBeShaded(Handle(AIS_InteractiveObject) theAIS) const
1423 bool aCanBeShaged = true;
1425 Handle(PartSet_ResultSketchPrs) aPrs = Handle(PartSet_ResultSketchPrs)::DownCast(theAIS);
1427 aCanBeShaged = false;
1429 return aCanBeShaged;
1432 //******************************************************
1433 void PartSet_Module::addObjectBrowserMenu(QMenu* theMenu) const
1435 QObjectPtrList aObjects = myWorkshop->selection()->selectedObjects();
1436 int aSelected = aObjects.size();
1437 SessionPtr aMgr = ModelAPI_Session::get();
1438 QAction* aActivatePartAction = myMenuMgr->action("ACTIVATE_PART_CMD");
1440 bool hasResult = false;
1441 bool hasFeature = false;
1442 bool hasParameter = false;
1443 bool hasCompositeOwner = false;
1444 bool hasResultInHistory = false;
1445 bool hasFolder = false;
1446 ModuleBase_Tools::checkObjects(aObjects, hasResult, hasFeature, hasParameter,
1447 hasCompositeOwner, hasResultInHistory, hasFolder);
1449 ModuleBase_Operation* aCurrentOp = myWorkshop->currentOperation();
1450 if (aSelected == 1) {
1451 ObjectPtr aObject = aObjects.first();
1453 ResultPartPtr aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aObject);
1454 FeaturePtr aFeature = std::dynamic_pointer_cast<ModelAPI_Feature>(aObject);
1455 bool isPart = aPart.get() ||
1456 (aFeature.get() && (aFeature->getKind() == PartSetPlugin_Part::ID()));
1458 DocumentPtr aPartDoc;
1460 aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aFeature->firstResult());
1462 if (aPart.get()) // this may be null is Part feature is disabled
1463 aPartDoc = aPart->partDoc();
1465 theMenu->addAction(aActivatePartAction);
1466 aActivatePartAction->setEnabled((aMgr->activeDocument() != aPartDoc));
1468 } else if (aObject->document() == aMgr->activeDocument()) {
1469 if (hasParameter || hasFeature) {
1470 myMenuMgr->action("EDIT_CMD")->setEnabled(true);
1471 theMenu->addAction(myMenuMgr->action("EDIT_CMD"));
1472 if (aCurrentOp && aFeature.get()) {
1473 if (aCurrentOp->id().toStdString() == aFeature->getKind())
1474 myMenuMgr->action("EDIT_CMD")->setEnabled(false);
1481 myMenuMgr->action("EDIT_CMD")->setEnabled(aCurrentOp == 0);
1482 theMenu->addAction(myMenuMgr->action("EDIT_CMD"));
1483 theMenu->addSeparator();
1486 bool aNotDeactivate = (aCurrentOp == 0);
1487 if (!aNotDeactivate) {
1488 aActivatePartAction->setEnabled(false);
1492 //******************************************************
1493 #define EXPAND_PARENT(OBJ) \
1494 QModelIndex aObjIndex = aDataModel->objectIndex(OBJ); \
1495 if (aObjIndex.isValid()) { \
1496 QModelIndex aParent = aObjIndex.parent(); \
1497 int aCount = aDataModel->rowCount(aParent); \
1499 aTreeView->setExpanded(aParent, true); \
1502 //******************************************************
1503 void PartSet_Module::processEvent(const std::shared_ptr<Events_Message>& theMessage)
1505 if (theMessage->eventID() == Events_Loop::loop()->eventByName(EVENT_DOCUMENT_CHANGED)) {
1506 // Do not change activation of parts if an operation active
1507 static QStringList aAllowActivationList;
1508 if (aAllowActivationList.isEmpty())
1509 aAllowActivationList <<
1510 QString(PartSetPlugin_Part::ID().c_str()) <<
1511 QString(PartSetPlugin_Duplicate::ID().c_str()) <<
1512 QString(PartSetPlugin_Remove::ID().c_str());
1513 if (myWorkshop->currentOperation() &&
1514 (!aAllowActivationList.contains(myWorkshop->currentOperation()->id())))
1516 XGUI_Workshop* aWorkshop = getWorkshop();
1517 XGUI_DataTree* aTreeView = aWorkshop->objectBrowser()->treeView();
1518 QLabel* aLabel = aWorkshop->objectBrowser()->activeDocLabel();
1519 QPalette aPalet = aLabel->palette();
1521 SessionPtr aMgr = ModelAPI_Session::get();
1522 DocumentPtr aActiveDoc = aMgr->activeDocument();
1524 // Clear active part index if there is no Part documents
1525 // It could be not null if document was closed and opened a new
1526 // without closeDocument call
1527 if (aMgr->allOpenedDocuments().size() <= 1)
1528 myActivePartIndex = QModelIndex();
1530 XGUI_DataModel* aDataModel = aWorkshop->objectBrowser()->dataModel();
1531 QModelIndex aOldActive = myActivePartIndex;
1532 myActivePartIndex = aDataModel->documentRootIndex(aActiveDoc, 0);
1533 bool needUpdate = false;
1534 if (myActivePartIndex.isValid()) {
1535 needUpdate = aTreeView->isExpanded(myActivePartIndex);
1537 aTreeView->setExpanded(myActivePartIndex, true);
1539 if ((aOldActive != myActivePartIndex) && (aOldActive.isValid()))
1540 aTreeView->setExpanded(aOldActive, false);
1542 aLabel->setPalette(aPalet);
1543 aWorkshop->updateCommandStatus();
1545 // Update displayed objects in order to update active color
1546 XGUI_Displayer* aDisplayer = aWorkshop->displayer();
1547 QObjectPtrList aObjects = aDisplayer->displayedObjects();
1549 bool aUpdateViewer = false;
1550 foreach(ObjectPtr aObj, aObjects) {
1551 aHidden = !aObj->data() || !aObj->data()->isValid() ||
1552 aObj->isDisabled() || (!aObj->isDisplayed());
1554 aDisplayer->redisplay(aObj, false);
1555 aUpdateViewer = true;
1559 aDisplayer->updateViewer();
1560 // Update tree items if they are expanded
1562 aTreeView->viewport()->update(aTreeView->viewport()->rect());
1564 } else if (theMessage->eventID() == Events_Loop::loop()->eventByName(EVENT_OBJECT_CREATED)) {
1565 std::shared_ptr<ModelAPI_ObjectUpdatedMessage> aUpdMsg =
1566 std::dynamic_pointer_cast<ModelAPI_ObjectUpdatedMessage>(theMessage);
1567 std::set<ObjectPtr> aObjects = aUpdMsg->objects();
1569 ObjectPtr aConstrObj;
1570 ObjectPtr aResultObj;
1571 std::set<ObjectPtr>::const_iterator aIt;
1572 DocumentPtr aRootDoc = ModelAPI_Session::get()->moduleDocument();
1573 for (aIt = aObjects.begin(); aIt != aObjects.end(); ++aIt) {
1574 ObjectPtr aObject = (*aIt);
1575 if ((!aResultObj.get()) && (aObject->groupName() == ModelAPI_ResultBody::group())
1576 && (aObject->document() != aRootDoc))
1577 aResultObj = aObject;
1578 if ((!aConstrObj.get()) && (aObject->groupName() == ModelAPI_ResultConstruction::group())
1579 && (aObject->document() != aRootDoc))
1580 aConstrObj = aObject;
1581 if (aResultObj.get() && aConstrObj.get())
1585 if (aResultObj.get() || aConstrObj.get()) {
1586 XGUI_Workshop* aWorkshop = getWorkshop();
1587 XGUI_DataTree* aTreeView = aWorkshop->objectBrowser()->treeView();
1588 XGUI_DataModel* aDataModel = aWorkshop->objectBrowser()->dataModel();
1590 if (aResultObj.get()) {
1591 EXPAND_PARENT(aResultObj)
1593 if (aConstrObj.get()) {
1594 EXPAND_PARENT(aConstrObj)
1598 else if (theMessage->eventID() == Events_Loop::loop()->eventByName(EVENT_OBJECT_TO_REDISPLAY)) {
1599 CompositeFeaturePtr aSketch = mySketchMgr->activeSketch();
1600 if (aSketch.get()) {
1601 ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
1602 if (PartSet_SketcherMgr::isSketchOperation(anOperation))
1603 mySketchMgr->previewSketchPlane()->createSketchPlane(aSketch, myWorkshop);
1608 //******************************************************
1609 void PartSet_Module::onTreeViewDoubleClick(const QModelIndex& theIndex)
1611 if (myWorkshop->currentOperation()) // Do not change activation of parts if an operation active
1613 SessionPtr aMgr = ModelAPI_Session::get();
1614 if (!theIndex.isValid()) {
1615 // It seems that this code is obsolete
1616 //aMgr->setActiveDocument(aMgr->moduleDocument());
1619 if (theIndex.column() != 1) // Use only first column
1622 XGUI_Workshop* aWorkshop = getWorkshop();
1623 XGUI_DataModel* aDataModel = aWorkshop->objectBrowser()->dataModel();
1624 // De not use non editable Indexes
1625 if ((aDataModel->flags(theIndex) & Qt::ItemIsSelectable) == 0)
1627 ObjectPtr aObj = aDataModel->object(theIndex);
1629 ResultPartPtr aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aObj);
1630 if (!aPart.get()) { // Probably this is Feature
1631 FeaturePtr aPartFeature = std::dynamic_pointer_cast<ModelAPI_Feature>(aObj);
1632 if (aPartFeature.get() && (aPartFeature->getKind() == PartSetPlugin_Part::ID())) {
1633 aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aPartFeature->firstResult());
1636 if (aPart.get()) { // if this is a part
1637 if (aPart->partDoc() == aMgr->activeDocument()) {
1638 myMenuMgr->activatePartSet();
1640 myMenuMgr->activatePart(aPart);
1645 //******************************************************
1646 void PartSet_Module::onViewCreated(ModuleBase_IViewWindow*)
1648 // z layer is created for all started operations in order to visualize operation AIS presentation
1650 Handle(AIS_InteractiveContext) aContext = myWorkshop->viewer()->AISContext();
1651 if (aContext.IsNull())
1654 Handle(V3d_Viewer) aViewer = aContext->CurrentViewer();
1655 if (myVisualLayerId == 0) {
1656 if (myVisualLayerId == 0)
1657 aViewer->AddZLayer(myVisualLayerId);
1659 TColStd_SequenceOfInteger aZList;
1660 aViewer->GetAllZLayers(aZList);
1661 bool aFound = false;
1662 for (int i = 1; i <= aZList.Length(); i++) {
1663 if (aZList(i) == myVisualLayerId) {
1669 aViewer->AddZLayer(myVisualLayerId);
1671 // if there is an active operation with validated widget,
1672 // the filters of this widget should be activated in the created view
1673 myWorkshop->selectionActivate()->updateSelectionFilters();
1674 myWorkshop->selectionActivate()->updateSelectionModes();
1677 //******************************************************
1678 void PartSet_Module::widgetStateChanged(int thePreviousState)
1680 mySketchMgr->widgetStateChanged(thePreviousState);
1683 //******************************************************
1684 bool PartSet_Module::processEnter(const std::string& thePreviousAttributeID)
1686 return mySketchReentrantMgr->processEnter(thePreviousAttributeID);
1689 //******************************************************
1690 void PartSet_Module::beforeOperationStopped(ModuleBase_Operation* theOperation)
1692 if (PartSet_SketcherMgr::isSketchOperation(theOperation)) {
1693 mySketchMgr->stopSketch(theOperation);
1697 //******************************************************
1698 GeomShapePtr PartSet_Module::findShape(const AttributePtr& theAttribute)
1700 GeomShapePtr aGeomShape;
1702 ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
1703 if (anOperation && sketchMgr()->isNestedSketchOperation(anOperation)) {
1704 aGeomShape = PartSet_Tools::findShapeBy2DPoint(theAttribute, myWorkshop);
1709 //******************************************************
1710 AttributePtr PartSet_Module::findAttribute(const ObjectPtr& theObject,
1711 const GeomShapePtr& theGeomShape)
1713 AttributePtr anAttribute;
1714 GeomShapePtr aGeomShape = theGeomShape;
1715 if (!aGeomShape.get()) {
1716 // processing shape of result, e.g. sketch circle center is selected, this is a result
1717 // the geom shape is empty, the shape of result should be used
1718 ResultPtr aResult = std::dynamic_pointer_cast<ModelAPI_Result>(theObject);
1719 if (aResult.get()) {
1720 aGeomShape = aResult->shape();
1724 if (aGeomShape.get()) {
1725 TopoDS_Shape aTDSShape = aGeomShape->impl<TopoDS_Shape>();
1726 return PartSet_Tools::findAttributeBy2dPoint(theObject, aTDSShape,
1727 mySketchMgr->activeSketch());
1732 //******************************************************
1733 std::shared_ptr<Events_Message> PartSet_Module::reentrantMessage()
1735 return sketchReentranceMgr()->reentrantMessage();
1738 //******************************************************
1739 void PartSet_Module::setReentrantPreSelection(const std::shared_ptr<Events_Message>& theMessage)
1741 sketchReentranceMgr()->setReentrantPreSelection(theMessage);
1744 //******************************************************
1745 void PartSet_Module::onChoiceChanged(ModuleBase_ModelWidget* theWidget,
1748 ModuleBase_WidgetChoice* aChoiceWidget = dynamic_cast<ModuleBase_WidgetChoice*>(theWidget);
1752 QString aChoiceTitle = aChoiceWidget->getPropertyPanelTitle(theIndex);
1753 if (!aChoiceTitle.isEmpty()) {
1754 ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
1757 ModuleBase_IPropertyPanel* aPanel = aOperation->propertyPanel();
1759 aPanel->setWindowTitle(aChoiceTitle);
1763 //******************************************************
1764 XGUI_Workshop* PartSet_Module::getWorkshop() const
1766 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
1767 return aConnector->workshop();
1770 void PartSet_Module::setDefaultConstraintShown()
1772 myHasConstraintShown[PartSet_Tools::Geometrical] = true;
1773 myHasConstraintShown[PartSet_Tools::Dimensional] = true;
1774 myHasConstraintShown[PartSet_Tools::Expressions] = false;
1777 //******************************************************
1778 ModuleBase_ITreeNode* PartSet_Module::rootNode() const
1783 //******************************************************
1784 void PartSet_Module::disableCustomMode(ModuleBase_CustomizeFlag theMode) {
1785 myCustomPrs->disableCustomMode(theMode);
1788 //******************************************************
1789 void PartSet_Module::enableCustomModes() {
1790 myCustomPrs->enableCustomModes();