1 // Copyright (C) 2014-2021 CEA/DEN, EDF R&D
3 // This library is free software; you can redistribute it and/or
4 // modify it under the terms of the GNU Lesser General Public
5 // License as published by the Free Software Foundation; either
6 // version 2.1 of the License, or (at your option) any later version.
8 // This library is distributed in the hope that it will be useful,
9 // but WITHOUT ANY WARRANTY; without even the implied warranty of
10 // MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
11 // Lesser General Public License for more details.
13 // You should have received a copy of the GNU Lesser General Public
14 // License along with this library; if not, write to the Free Software
15 // Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
17 // See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
20 #include "PartSet_Module.h"
21 #include "PartSet_WidgetSketchLabel.h"
22 #include "PartSet_Validators.h"
23 #include "PartSet_Tools.h"
24 #include "PartSet_PreviewPlanes.h"
25 #include "PartSet_WidgetBSplinePoints.h"
26 #include "PartSet_WidgetPoint2d.h"
27 #include "PartSet_WidgetPoint2DFlyout.h"
28 #include "PartSet_WidgetShapeSelector.h"
29 #include "PartSet_WidgetMultiSelector.h"
30 #include "PartSet_WidgetFeaturePointSelector.h"
31 #include "PartSet_WidgetEditor.h"
32 #include "PartSet_WidgetFileSelector.h"
33 #include "PartSet_WidgetSketchCreator.h"
34 #include "PartSet_SketcherMgr.h"
35 #include "PartSet_SketcherReentrantMgr.h"
36 #include "PartSet_ResultSketchPrs.h"
37 #include "PartSet_MenuMgr.h"
38 #include "PartSet_CustomPrs.h"
39 #include "PartSet_IconFactory.h"
40 #include "PartSet_OverconstraintListener.h"
41 #include "PartSet_TreeNodes.h"
42 #include "PartSet_FieldStepPrs.h"
43 #include "PartSet_BSplineWidget.h"
45 #include "PartSet_Filters.h"
46 #include "PartSet_FilterInfinite.h"
52 #include <PartSetPlugin_Remove.h>
53 #include <PartSetPlugin_Part.h>
54 #include <PartSetPlugin_Duplicate.h>
56 #include <SketchPlugin_ConstraintCoincidence.h>
58 #include <ModuleBase_Operation.h>
59 #include <ModuleBase_IViewer.h>
60 #include <ModuleBase_IViewWindow.h>
61 #include <ModuleBase_IPropertyPanel.h>
62 #include <ModuleBase_ISelectionActivate.h>
63 #include <ModuleBase_WidgetChoice.h>
64 #include <ModuleBase_WidgetEditor.h>
65 #include <ModuleBase_WidgetValidated.h>
66 #include <ModuleBase_Tools.h>
67 #include <ModuleBase_OperationFeature.h>
68 #include <ModuleBase_WidgetFactory.h>
69 #include <ModuleBase_OperationDescription.h>
70 #include <ModuleBase_ViewerPrs.h>
71 #include <ModuleBase_ResultPrs.h>
73 #include <ModelAPI_ResultField.h>
74 #include <ModelAPI_Object.h>
75 #include <ModelAPI_Events.h>
76 #include <ModelAPI_Validator.h>
77 #include <ModelAPI_Data.h>
78 #include <ModelAPI_Session.h>
79 #include <ModelAPI_ResultBody.h>
80 #include <ModelAPI_AttributeString.h>
81 #include <ModelAPI_AttributeSelectionList.h>
82 #include <ModelAPI_Tools.h>
83 #include <ModelAPI_ResultConstruction.h>
84 #include <ModelAPI_AttributeIntArray.h>
85 #include <ModelAPI_AttributeImage.h>
86 #include <ModelAPI_ResultGroup.h>
87 #include <ModelAPI_ResultParameter.h>
89 #include <GeomDataAPI_Point2D.h>
90 #include <GeomDataAPI_Point.h>
91 #include <GeomDataAPI_Dir.h>
93 #include <XGUI_ActiveControlMgr.h>
94 #include <XGUI_ActiveControlSelector.h>
95 #include <XGUI_ActionsMgr.h>
96 #include <XGUI_ContextMenuMgr.h>
97 #include <XGUI_DataModel.h>
98 #include <XGUI_Displayer.h>
99 #include <XGUI_ErrorMgr.h>
100 #include <XGUI_FacesPanelSelector.h>
101 #include <XGUI_ModuleConnector.h>
102 #include <XGUI_ObjectsBrowser.h>
103 #include <XGUI_OperationMgr.h>
104 #include <XGUI_PropertyPanel.h>
105 #include <XGUI_SelectionMgr.h>
106 #include <XGUI_Tools.h>
107 #include <XGUI_Workshop.h>
109 #include <SketchPlugin_ConstraintAngle.h>
110 #include <SketchPlugin_ConstraintLength.h>
111 #include <SketchPlugin_ConstraintDistance.h>
112 #include <SketchPlugin_ConstraintParallel.h>
113 #include <SketchPlugin_ConstraintPerpendicular.h>
114 #include <SketchPlugin_ConstraintRadius.h>
115 #include <SketchPlugin_Feature.h>
116 #include <SketchPlugin_Projection.h>
117 #include <SketchPlugin_Sketch.h>
119 #include <SketcherPrs_SymbolPrs.h>
120 #include <SketcherPrs_PositionMgr.h>
121 #include <SketcherPrs_Coincident.h>
122 #include <SketcherPrs_Tools.h>
124 #include <Events_Loop.h>
125 #include <Config_PropManager.h>
126 #include <Config_Keywords.h>
128 #include <AIS_Dimension.hxx>
129 #include <AIS_InteractiveObject.hxx>
130 #include <StdSelect_TypeOfFace.hxx>
131 #include <TopoDS_Vertex.hxx>
132 #include <TopoDS.hxx>
133 #include <TopoDS_Shape.hxx>
134 #include <BRep_Tool.hxx>
137 #include <QMouseEvent>
140 #include <QApplication>
141 #include <QMessageBox>
142 #include <QMainWindow>
146 #include <GeomAlgoAPI_FaceBuilder.h>
147 #include <GeomDataAPI_Dir.h>
149 #include <SelectMgr_ListIteratorOfListOfFilter.hxx>
150 #include <Graphic3d_Texture2Dmanual.hxx>
153 #define FEATURE_ITEM_COLOR "0,0,225"
156 /*!Create and return new instance of XGUI_Module*/
157 extern "C" PARTSET_EXPORT ModuleBase_IModule* createModule(ModuleBase_IWorkshop* theWshop)
159 return new PartSet_Module(theWshop);
162 //******************************************************
163 PartSet_Module::PartSet_Module(ModuleBase_IWorkshop* theWshop)
164 : ModuleBase_IModule(theWshop),
165 myIsOperationIsLaunched(false),
169 new PartSet_IconFactory(this);
171 mySketchMgr = new PartSet_SketcherMgr(this);
172 mySketchReentrantMgr = new PartSet_SketcherReentrantMgr(theWshop);
174 ModuleBase_IViewer* aViewer = theWshop->viewer();
175 connect(aViewer, SIGNAL(keyRelease(ModuleBase_IViewWindow*, QKeyEvent*)),
176 this, SLOT(onKeyRelease(ModuleBase_IViewWindow*, QKeyEvent*)));
177 connect(aViewer, SIGNAL(viewTransformed(int)),
178 SLOT(onViewTransformed(int)));
179 connect(aViewer, SIGNAL(viewCreated(ModuleBase_IViewWindow*)),
180 SLOT(onViewCreated(ModuleBase_IViewWindow*)));
181 myMenuMgr = new PartSet_MenuMgr(this);
182 myCustomPrs = new PartSet_CustomPrs(theWshop);
184 myOverconstraintListener = new PartSet_OverconstraintListener(theWshop);
186 Events_Loop* aLoop = Events_Loop::loop();
187 aLoop->registerListener(this, Events_Loop::eventByName(EVENT_DOCUMENT_CHANGED));
188 aLoop->registerListener(this, Events_Loop::eventByName(EVENT_OBJECT_TO_REDISPLAY));
190 registerSelectionFilter(SF_GlobalFilter, new PartSet_GlobalFilter(myWorkshop));
191 registerSelectionFilter(SF_FilterInfinite, new PartSet_FilterInfinite(myWorkshop));
192 Handle(PartSet_ResultGroupNameFilter) aCRFilter = new PartSet_ResultGroupNameFilter(myWorkshop);
193 std::set<std::string> aCRGroupNames;
194 aCRGroupNames.insert(ModelAPI_ResultConstruction::group());
195 aCRFilter->setGroupNames(aCRGroupNames);
196 registerSelectionFilter(SF_ResultGroupNameFilter, aCRFilter);
198 setDefaultConstraintShown();
200 Config_PropManager::registerProp("Visualization", "result_body_color", "Result color",
201 Config_Prop::Color, ModelAPI_ResultBody::DEFAULT_COLOR());
203 Config_PropManager::registerProp("Visualization", "result_group_color", "Group color",
204 Config_Prop::Color, ModelAPI_ResultGroup::DEFAULT_COLOR());
206 Config_PropManager::registerProp("Visualization", "result_construction_color",
207 "Construction color",
209 ModelAPI_ResultConstruction::DEFAULT_COLOR());
211 Config_PropManager::registerProp("Visualization", "result_part_color", "Part color",
212 Config_Prop::Color, ModelAPI_ResultPart::DEFAULT_COLOR());
214 Config_PropManager::registerProp("Visualization", "result_field_color", "Field color",
215 Config_Prop::Color, ModelAPI_ResultField::DEFAULT_COLOR());
217 Config_PropManager::registerProp("Visualization", "operation_parameter_color",
218 "Reference shape wireframe color in operation", Config_Prop::Color,
219 PartSet_CustomPrs::OPERATION_PARAMETER_COLOR());
220 Config_PropManager::registerProp("Visualization", "operation_result_color",
221 "Result shape wireframe color in operation", Config_Prop::Color,
222 PartSet_CustomPrs::OPERATION_RESULT_COLOR());
223 Config_PropManager::registerProp("Visualization", "operation_highlight_color",
224 "Multi selector item color in operation", Config_Prop::Color,
225 PartSet_CustomPrs::OPERATION_HIGHLIGHT_COLOR());
226 Config_PropManager::registerProp("Visualization", "operation_remove_feature_color",
227 "Color of removed feature in operation", Config_Prop::Color,
228 PartSet_CustomPrs::OPERATION_REMOVE_FEATURE_COLOR());
229 Config_PropManager::registerProp("Visualization", "sketch_preview_plane",
230 "Color of sketch plane", Config_Prop::Color,
231 PartSet_CustomPrs::OPERATION_SKETCH_PLANE());
233 Config_PropManager::registerProp("Visualization", "hidden_face_transparency",
234 "Hidden faces transparency",
235 Config_Prop::DblSpin,
238 std::ostringstream aStream;
239 aStream << SketcherPrs_Tools::getDefaultArrowSize();
240 Config_PropManager::registerProp("Visualization", "dimension_arrow_size",
241 "Dimension arrow size", Config_Prop::IntSpin, aStream.str());
243 Config_PropManager::registerProp("Visualization", "dimension_font", "Dimension font",
244 Config_Prop::String, "Times-bold");
248 aStream << SketcherPrs_Tools::getDefaultTextHeight();
249 Config_PropManager::registerProp("Visualization", "dimension_value_size",
250 "Dimension value size", Config_Prop::IntSpin, aStream.str());
252 Config_PropManager::registerProp("Visualization", "sketch_dimension_color",
254 Config_Prop::Color, SKETCH_DIMENSION_COLOR);
256 Config_PropManager::registerProp("Visualization", "feature_objectbrowser_color",
257 "Feature items in Object Browser",
258 Config_Prop::Color, FEATURE_ITEM_COLOR);
260 Config_PropManager::registerProp("Visualization", "zoom_trihedron_arrows",
261 "Keep trihedron arrows view size constant", Config_Prop::Boolean, "false");
263 Config_PropManager::registerProp("Visualization", "axis_arrow_size",
264 "Trihedron arrows constant size", Config_Prop::IntSpin, "10");
266 Config_PropManager::registerProp("Shortcuts", "add_parameter_shortcut",
267 "Add parameter in parameters manager dialog",
268 Config_Prop::Shortcut, "Ctrl+A");
270 Config_PropManager::registerProp("Windows", "use_hide_faces_panel",
271 "Use HideFaces panel in operations", Config_Prop::Boolean, "false");
274 //******************************************************
275 PartSet_Module::~PartSet_Module()
278 delete myOverconstraintListener;
282 //******************************************************
283 void PartSet_Module::createFeatures()
285 ModuleBase_IModule::createFeatures();
286 myRoot = new PartSet_RootNode();
287 myRoot->setWorkshop(workshop());
291 //******************************************************
292 void PartSet_Module::storeSelection()
294 // cash is used only to restore selection, so it should be filled in storeSelection and
295 // after applying immediatelly cleared in restoreSelection
296 myCurrentSelection.clear();
297 sketchMgr()->storeSelection(PartSet_SketcherMgr::ST_SelectType, myCurrentSelection);
300 //******************************************************
301 void PartSet_Module::restoreSelection()
303 // cash is used only to restore selection, so it should be filled in storeSelection and
304 // after applying immediatelly cleared in restoreSelection
305 sketchMgr()->restoreSelection(myCurrentSelection);
306 myCurrentSelection.clear();
309 //******************************************************
310 void PartSet_Module::registerValidators()
312 //Registering of validators
313 SessionPtr aMgr = ModelAPI_Session::get();
314 ModelAPI_ValidatorsFactory* aFactory = aMgr->validators();
315 aFactory->registerValidator("PartSet_DistanceSelection", new PartSet_DistanceSelection);
316 aFactory->registerValidator("PartSet_LengthSelection", new PartSet_LengthSelection);
317 aFactory->registerValidator("PartSet_PerpendicularSelection", new PartSet_PerpendicularSelection);
318 aFactory->registerValidator("PartSet_ParallelSelection", new PartSet_ParallelSelection);
319 aFactory->registerValidator("PartSet_RadiusSelection", new PartSet_RadiusSelection);
320 aFactory->registerValidator("PartSet_RigidSelection", new PartSet_RigidSelection);
321 aFactory->registerValidator("PartSet_CoincidentSelection", new PartSet_CoincidentSelection);
322 aFactory->registerValidator("PartSet_HVDirSelection", new PartSet_HVDirSelection);
323 aFactory->registerValidator("PartSet_TangentSelection", new PartSet_TangentSelection);
324 aFactory->registerValidator("PartSet_FilletSelection", new PartSet_FilletSelection);
325 aFactory->registerValidator("PartSet_AngleSelection", new PartSet_AngleSelection);
326 aFactory->registerValidator("PartSet_EqualSelection", new PartSet_EqualSelection);
327 aFactory->registerValidator("PartSet_CollinearSelection", new PartSet_CollinearSelection);
328 aFactory->registerValidator("PartSet_MiddlePointSelection", new PartSet_MiddlePointSelection);
329 aFactory->registerValidator("PartSet_DifferentObjects", new PartSet_DifferentObjectsValidator);
330 aFactory->registerValidator("PartSet_DifferentPoints", new PartSet_DifferentPointsValidator);
331 aFactory->registerValidator("PartSet_CoincidentAttr", new PartSet_CoincidentAttr);
332 aFactory->registerValidator("PartSet_MultyTranslationSelection",
333 new PartSet_MultyTranslationSelection);
334 aFactory->registerValidator("PartSet_SplitSelection", new PartSet_SplitSelection);
335 aFactory->registerValidator("PartSet_ProjectionSelection", new PartSet_ProjectionSelection);
336 aFactory->registerValidator("PartSet_IntersectionSelection", new PartSet_IntersectionSelection);
339 //******************************************************
340 void PartSet_Module::connectToPropertyPanel(ModuleBase_ModelWidget* theWidget,
341 const bool isToConnect)
343 mySketchMgr->connectToPropertyPanel(theWidget, isToConnect);
346 //******************************************************
347 void PartSet_Module::operationCommitted(ModuleBase_Operation* theOperation)
349 if (sketchMgr()->isNestedSketchOperation(theOperation)) {
350 mySketchMgr->commitNestedSketch(theOperation);
352 /// deactivate of overconstraint listener should be performed after Sketch commit (#2176)
353 if (PartSet_SketcherMgr::isSketchOperation(theOperation))
354 overconstraintListener()->setActive(false);
356 /// Restart sketcher operations automatically
357 if (!mySketchReentrantMgr->operationCommitted(theOperation)) {
358 getWorkshop()->selector()->clearSelection();
362 //******************************************************
363 void PartSet_Module::operationAborted(ModuleBase_Operation* theOperation)
365 /// Restart sketcher operations automatically
366 mySketchReentrantMgr->operationAborted(theOperation);
367 /// deactivate of overconstraint listener should be performed after Sketch abort (#2176)
368 if (PartSet_SketcherMgr::isSketchOperation(theOperation))
369 overconstraintListener()->setActive(false);
371 getWorkshop()->selector()->clearSelection();
374 //******************************************************
375 void PartSet_Module::operationStarted(ModuleBase_Operation* theOperation)
377 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>
380 XGUI_Workshop* aWorkshop = XGUI_Tools::workshop(workshop());
381 XGUI_PropertyPanel* aPropertyPanel = aWorkshop->propertyPanel();
383 ModuleBase_ModelWidget* aFilledWidget = 0;
384 bool aPostonedWidgetActivation = false;
386 FeaturePtr aFeature = aFOperation->feature();
387 /// Restart sketcher operations automatically
388 /// it is important to call method of sketch reentrant manager before filling of PP
389 /// because it fills some created feature attributes, these new values should be used
390 /// to fill the property panel
391 mySketchReentrantMgr->operationStarted(theOperation);
393 aWorkshop->fillPropertyPanel(aFOperation);
394 // filling the operation values by the current selection
395 // if the operation can be committed after the controls filling, the method perform should
396 // be stopped. Otherwise unnecessary presentations can be shown(e.g. operation prs in sketch)
397 bool isOperationCommitted = false;
398 if (!aFOperation->isEditOperation()) {
399 std::string aGreedAttributeId = ModuleBase_Tools::findGreedAttribute(workshop(), aFeature);
400 // if there is a greed attribute, automatic commit by preselection
401 // for this feature is prohibited
402 aFilledWidget = aFOperation->activateByPreselection(aGreedAttributeId);
403 if (currentOperation() != aFOperation)
404 isOperationCommitted = true;
406 if (aGreedAttributeId.empty()) {
407 // a signal should be emitted before the next widget activation
408 // because, the activation of the next widget will give a focus to the widget.
409 // As a result the value of the widget is initialized.
410 // And commit may happens until the value is entered.
412 if (mySketchReentrantMgr->canBeCommittedByPreselection())
413 isOperationCommitted = mySketchMgr->operationActivatedByPreselection();
414 // activate the next obligatory widget
415 if (!isOperationCommitted)
416 aPropertyPanel->activateNextWidget(aFilledWidget);
419 else { // there is a greed widget
420 const QList<ModuleBase_ModelWidget*>& aWidgets = aPropertyPanel->modelWidgets();
421 std::string aFirstAttributeId = aWidgets.front()->attributeID();
422 // activate next widget after greeded if it is the first widget in the panel
423 // else the first panel widget is already activated by operation start
424 if (aFirstAttributeId == aGreedAttributeId)
425 aPostonedWidgetActivation = true;
428 } if (!isOperationCommitted) {
429 aWorkshop->connectToPropertyPanel(true);
430 updateSketcherOnStart(aFOperation);
431 updatePresentationsOnStart(aFOperation);
433 // the objects of the current operation should be deactivated
434 QObjectPtrList anObjects;
435 anObjects.append(aFeature);
436 std::list<ResultPtr> aResults;
437 ModelAPI_Tools::allResults(aFeature, aResults);
438 std::list<ResultPtr>::const_iterator aIt;
439 for (aIt = aResults.begin(); aIt != aResults.end(); ++aIt) {
440 anObjects.append(*aIt);
442 QObjectPtrList::const_iterator anIt = anObjects.begin(), aLast = anObjects.end();
443 for (; anIt != aLast; anIt++)
444 aWorkshop->deactivateActiveObject(*anIt, false);
445 if (anObjects.size() > 0) {
446 XGUI_Displayer* aDisplayer = aWorkshop->displayer();
447 aDisplayer->updateViewer();
449 /// state of command actions should be updated after displayed objects modification because
450 /// deactivation(for example) of objects may influence on selection in the viewer
451 /// State of command actions may depend on selection in the viewer(e.g. Sketch)
452 workshop()->updateCommandStatus();
454 if (aPostonedWidgetActivation) {
455 // if the widget is an empty in the chain of activated widgets, the current operation
456 // is restarted. It should be performed after functionality of the operation starting
457 aPropertyPanel->activateNextWidget(aFilledWidget);
462 //******************************************************
463 void PartSet_Module::updateSketcherOnStart(ModuleBase_Operation* theOperation)
465 if (PartSet_SketcherMgr::isSketchOperation(theOperation)) {
466 mySketchMgr->startSketch(theOperation);
468 // It is switched off because of
469 // Task #3067: 5.2.2 Drawing in the sketcher: change the mouse cursor arrow
470 else if (sketchMgr()->isNestedSketchOperation(theOperation)) {
471 mySketchMgr->startNestedSketch(theOperation);
475 //******************************************************
476 void PartSet_Module::updatePresentationsOnStart(ModuleBase_Operation* theOperation)
478 ModuleBase_OperationFeature* aFOperation =
479 dynamic_cast<ModuleBase_OperationFeature*>(theOperation);
481 myCustomPrs->activate(aFOperation->feature(), ModuleBase_IModule::CustomizeArguments, false);
482 myCustomPrs->activate(aFOperation->feature(), ModuleBase_IModule::CustomizeResults, false);
486 //******************************************************
487 void PartSet_Module::operationResumed(ModuleBase_Operation* theOperation)
489 ModuleBase_IModule::operationResumed(theOperation);
491 ModuleBase_OperationFeature* aFOperation =
492 dynamic_cast<ModuleBase_OperationFeature*>(theOperation);
494 myCustomPrs->activate(aFOperation->feature(), ModuleBase_IModule::CustomizeArguments, false);
495 myCustomPrs->activate(aFOperation->feature(), ModuleBase_IModule::CustomizeResults, false);
499 //******************************************************
500 void PartSet_Module::operationStopped(ModuleBase_Operation* theOperation)
502 bool isModifiedArgs = myCustomPrs->deactivate(ModuleBase_IModule::CustomizeArguments, false);
503 bool isModifiedResults = myCustomPrs->deactivate(ModuleBase_IModule::CustomizeResults, false);
504 bool isModified = isModifiedArgs || isModifiedResults;
506 if (sketchMgr()->isNestedSketchOperation(theOperation)) {
507 mySketchMgr->stopNestedSketch(theOperation);
509 else if (PartSet_SketcherMgr::isSketchOperation(theOperation))
510 setDefaultConstraintShown();
512 //VSV: Viewer is updated on feature update and redisplay
514 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(myWorkshop);
515 XGUI_Displayer* aDisplayer = aConnector->workshop()->displayer();
516 aDisplayer->updateViewer();
519 QMap<PartSet_Tools::ConstraintVisibleState, bool>::const_iterator
520 anIt = myHasConstraintShown.begin(), aLast = myHasConstraintShown.end();
521 for (; anIt != aLast; anIt++) {
522 mySketchMgr->updateBySketchParameters(anIt.key(), anIt.value());
526 //******************************************************
527 ModuleBase_Operation* PartSet_Module::currentOperation() const
529 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
530 XGUI_OperationMgr* anOpMgr = aConnector->workshop()->operationMgr();
531 return anOpMgr->currentOperation();
534 //******************************************************
535 bool PartSet_Module::canUndo() const
537 bool aCanUndo = false;
538 SessionPtr aMgr = ModelAPI_Session::get();
539 if (aMgr->hasModuleDocument() && aMgr->canUndo()) {
540 aCanUndo = !aMgr->isOperation();
541 if (!aCanUndo) // check the enable state additionally by sketch manager
542 aCanUndo = aMgr->canUndo();
547 //******************************************************
548 bool PartSet_Module::canRedo() const
550 bool aCanRedo = false;
551 SessionPtr aMgr = ModelAPI_Session::get();
552 if (aMgr->hasModuleDocument() && aMgr->canRedo()) {
553 aCanRedo = !aMgr->isOperation();
554 if (!aCanRedo) // check the enable state additionally by sketch manager
555 aCanRedo = aMgr->canRedo();
560 //******************************************************
561 bool PartSet_Module::canApplyAction(const ObjectPtr& theObject, const QString& theActionId) const
564 if (theActionId == "MOVE_CMD" || theActionId == "MOVE_SPLIT_CMD") {
565 FeaturePtr aFeature = ModelAPI_Feature::feature(theObject);
567 ResultPtr aResult = ModuleBase_Tools::firstResult(aFeature);
568 // part features can not be moved in the history.
569 if (aResult.get() && aResult->groupName() == ModelAPI_ResultPart::group())
576 //******************************************************
577 bool PartSet_Module::canEraseObject(const ObjectPtr& theObject) const
579 // the sketch manager put the restriction to the objects erase
580 return mySketchMgr->canEraseObject(theObject);
583 //******************************************************
584 bool PartSet_Module::canDisplayObject(const ObjectPtr& theObject) const
586 // the sketch manager put the restriction to the objects display
587 return mySketchMgr->canDisplayObject(theObject);
590 //******************************************************
591 bool PartSet_Module::canUsePreselection(const QString& thePreviousOperationKind,
592 const QString& theStartedOperationKind)
594 if (ModuleBase_IModule::canUsePreselection(thePreviousOperationKind, theStartedOperationKind))
597 return mySketchMgr->isNestedSketchFeature(theStartedOperationKind);
600 /*void PartSet_Module::processHiddenObject(const std::list<ObjectPtr>& theObjects)
602 mySketchMgr->processHiddenObject(theObjects);
605 //******************************************************
606 bool PartSet_Module::canActivateSelection(const ObjectPtr& theObject) const
608 bool aCanActivate = ModuleBase_IModule::canActivateSelection(theObject);
610 ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
611 bool isSketchOp = PartSet_SketcherMgr::isSketchOperation(anOperation),
612 isNestedOp = sketchMgr()->isNestedSketchOperation(anOperation);
613 if (isSketchOp || isNestedOp) {
614 // in active sketch operation it is possible to activate operation object in selection
615 // in the edit operation, e.g. points of the line can be moved when the line is edited
616 ModuleBase_OperationFeature* aFOperation =
617 dynamic_cast<ModuleBase_OperationFeature*>(anOperation);
618 aCanActivate = aCanActivate || (aFOperation && aFOperation->isEditOperation());
623 //******************************************************
624 bool PartSet_Module::addViewerMenu(const QMap<QString, QAction*>& theStdActions,
626 QMap<int, QAction*>& theMenuActions) const
628 return myMenuMgr->addViewerMenu(theStdActions, theParent, theMenuActions);
631 //******************************************************
632 void PartSet_Module::updateViewerMenu(const QMap<QString, QAction*>& theStdActions)
634 myMenuMgr->updateViewerMenu(theStdActions);
637 //******************************************************
638 bool PartSet_Module::isActionEnableStateFixed(const int theActionId) const
640 bool isEnabledFixed = false;
641 if (theActionId == XGUI_ActionsMgr::AcceptAll &&
642 mySketchReentrantMgr->isInternalEditActive())
643 isEnabledFixed = true;
644 return isEnabledFixed;
647 //******************************************************
648 QString PartSet_Module::getFeatureError(const FeaturePtr& theFeature)
650 QString anError = ModuleBase_IModule::getFeatureError(theFeature);
651 if (anError.isEmpty())
652 anError = sketchMgr()->getFeatureError(theFeature);
657 //******************************************************
658 void PartSet_Module::grantedOperationIds(ModuleBase_Operation* theOperation,
659 QStringList& theIds) const
661 myMenuMgr->grantedOperationIds(theOperation, theIds);
663 if (PartSet_SketcherMgr::isSketchOperation(theOperation)) {
664 XGUI_Workshop* aWorkshop = getWorkshop();
665 theIds.append(aWorkshop->contextMenuMgr()->action("DELETE_CMD")->text());
669 //******************************************************
670 void PartSet_Module::activeSelectionModes(QIntList& theModes)
672 if (mySketchMgr->activeSketch().get())
673 PartSet_SketcherMgr::sketchSelectionModes(mySketchMgr->activeSketch(), theModes);
675 theModes = XGUI_Tools::workshop(myWorkshop)->viewerSelectionModes();
678 //******************************************************
679 void PartSet_Module::moduleSelectionModes(int theModesType, QIntList& theModes)
681 customSubShapesSelectionModes(theModes);
682 //theModes.append(XGUI_Tools::workshop(myWorkshop)->viewerSelectionModes());
683 //myWorkshop->module()->activeSelectionModes(theModes);
686 //******************************************************
687 void PartSet_Module::moduleSelectionFilters(const QIntList& theFilterTypes,
688 SelectMgr_ListOfFilter& theSelectionFilters)
690 bool isSketchActive = mySketchMgr->activeSketch().get();
692 std::map<ModuleBase_SelectionFilterType, Handle(SelectMgr_Filter)>::const_iterator aFiltersIt =
693 mySelectionFilters.begin();
694 for (; aFiltersIt != mySelectionFilters.end(); aFiltersIt++) {
695 int aFilterType = aFiltersIt->first;
696 // do not add not participating filters in given parameters
697 if (!theFilterTypes.contains(aFilterType))
700 // using sketch filters only if sketch operation is active
701 if (!isSketchActive &&
702 mySketchMgr->sketchSelectionFilter((ModuleBase_SelectionFilterType)aFilterType))
705 // using filtering of construction results only from faces panel
706 if (aFilterType == SF_ResultGroupNameFilter)
709 theSelectionFilters.Append(aFiltersIt->second);
713 //******************************************************
714 void PartSet_Module::customSubShapesSelectionModes(QIntList& theModes)
716 if (theModes.contains(TopAbs_FACE))
717 theModes.append(SketcherPrs_Tools::Sel_Sketch_Face);
718 if (theModes.contains(TopAbs_WIRE))
719 theModes.append(SketcherPrs_Tools::Sel_Sketch_Wire);
721 if (mySketchMgr->activeSketch().get())
722 PartSet_SketcherMgr::sketchSelectionModes(mySketchMgr->activeSketch(), theModes);
725 //******************************************************
726 void PartSet_Module::getGeomSelection(const std::shared_ptr<ModuleBase_ViewerPrs>& theSelected,
727 ObjectPtr& theObject, AttributePtr& theAttribute)
729 ObjectPtr anObject = theSelected->object();
730 GeomShapePtr aShape = theSelected->shape();
732 theAttribute = findAttribute(anObject, aShape);
733 // TODO: try to create result if object is an external object
734 theObject = anObject;
737 //******************************************************
738 bool PartSet_Module::isMouseOverWindow()
740 return mySketchMgr->isMouseOverWindow();
743 //******************************************************
744 bool PartSet_Module::isSketchNeutralPointActivated() const
746 bool isNeutralPoint = true;
747 if (sketchReentranceMgr()->isInternalEditActive())
748 isNeutralPoint = false;
749 if (myIsOperationIsLaunched)
750 isNeutralPoint = false;
752 return isNeutralPoint;
755 //******************************************************
756 void PartSet_Module::closeDocument()
758 myActivePartIndex = QModelIndex();
759 SketcherPrs_PositionMgr::get()->clearAll();
762 //******************************************************
763 void PartSet_Module::clearViewer()
765 myCustomPrs->clearPrs();
767 XGUI_Workshop* aWorkshop = getWorkshop();
768 XGUI_Displayer* aDisplayer = aWorkshop->displayer();
769 aDisplayer->deactivateSelectionFilters(false);
772 //******************************************************
773 void PartSet_Module::propertyPanelDefined(ModuleBase_Operation* theOperation)
775 ModuleBase_OperationFeature* aFOperation =
776 dynamic_cast<ModuleBase_OperationFeature*>(theOperation);
780 ModuleBase_IPropertyPanel* aPanel = aFOperation->propertyPanel();
781 // we have to manually activate the sketch label in edit mode
782 if (PartSet_SketcherMgr::isSketchOperation(aFOperation) && (aFOperation->isEditOperation()))
783 aPanel->activateWidget(aPanel->modelWidgets().first());
786 //******************************************************
787 bool PartSet_Module::createWidgets(const FeaturePtr& theFeature, const QString& theXmlRepr,
788 QList<ModuleBase_ModelWidget*>& theWidgets) const
790 bool aProcessed = false;
792 XGUI_Workshop* aWorkshop = getWorkshop();
793 XGUI_PropertyPanel* aPropertyPanel = aWorkshop->propertyPanel();
794 if (mySketchMgr->activeSketch().get() && aPropertyPanel) {
795 ModuleBase_ISelection* aSelection = workshop()->selection();
796 // click on a point in sketch leads here with the point is highlighted, not yet selected
797 QList<ModuleBase_ViewerPrsPtr> aPreselection = aSelection->getHighlighted();
798 if (aPreselection.size() == 1) {
799 ModuleBase_ViewerPrsPtr aSelectedPrs = aPreselection[0];
800 ObjectPtr anObject = aSelectedPrs->object();
802 FeaturePtr aFeature = ModelAPI_Feature::feature(anObject);
803 GeomShapePtr aShape = aSelectedPrs->shape();
804 // click on the digit of dimension constrain comes here
805 // with an empty shape, so we need the check
806 if (aFeature == theFeature && aShape.get() && !aShape->isNull()) {
807 // if feature has only one result and shape of result is equal to selected shape
808 // this attribute is not processed. It is a case of Sketch Point.
809 if (aFeature->results().size() == 1) {
810 ResultPtr aResult = aFeature->results().front();
811 if (aResult.get() && aResult->shape()->isEqual(aShape))
814 const TopoDS_Shape& aTDShape = aShape->impl<TopoDS_Shape>();
815 std::pair<AttributePtr, int> anAttribute =
816 PartSet_Tools::findAttributeBy2dPoint(anObject, aTDShape, mySketchMgr->activeSketch());
817 if (anAttribute.first.get()) {
818 ModuleBase_WidgetFactory aFactory(theXmlRepr.toStdString(), workshop());
820 const std::string anAttributeId = anAttribute.first->id();
821 aFactory.createWidget(aPropertyPanel->contentWidget(), anAttributeId);
823 theWidgets = aFactory.getModelWidgets();
824 // it is possible that the point does not present in XML definition,
825 // in this case, we assume that it is not processed by this module
826 // e.g. "Intersection point" feature
827 aProcessed = !theWidgets.isEmpty();
835 //******************************************************
836 void PartSet_Module::onSelectionChanged()
838 ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
842 bool isSketcherOp = false;
843 // An edit operation is enable only if the current opeation is the sketch operation
844 if (mySketchMgr->activeSketch()) {
845 if (PartSet_Tools::sketchPlane(mySketchMgr->activeSketch()))
846 isSketcherOp = PartSet_SketcherMgr::isSketchOperation(aOperation);
849 // Editing of constraints can be done on selection
850 ModuleBase_ISelection* aSelect = myWorkshop->selection();
851 QList<ModuleBase_ViewerPrsPtr> aSelected = aSelect->getSelected();
852 if (aSelected.size() == 1) {
853 ModuleBase_ViewerPrsPtr aPrs = aSelected.first();
854 ObjectPtr aObject = aPrs->object();
855 FeaturePtr aFeature = ModelAPI_Feature::feature(aObject);
857 std::string aId = aFeature->getKind();
858 if ((aId == SketchPlugin_ConstraintRadius::ID()) ||
859 (aId == SketchPlugin_ConstraintLength::ID()) ||
860 (aId == SketchPlugin_ConstraintDistance::ID()) ||
861 (aId == SketchPlugin_ConstraintAngle::ID())) {
862 editFeature(aFeature);
869 //******************************************************
870 void PartSet_Module::onKeyRelease(ModuleBase_IViewWindow* theWnd, QKeyEvent* theEvent)
872 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
873 XGUI_OperationMgr* anOpMgr = aConnector->workshop()->operationMgr();
874 anOpMgr->onKeyReleased(theWnd->viewPort(), theEvent);
877 //******************************************************
878 ModuleBase_ModelWidget* PartSet_Module::createWidgetByType(const std::string& theType,
880 Config_WidgetAPI* theWidgetApi)
882 ModuleBase_IWorkshop* aWorkshop = workshop();
883 ModuleBase_ModelWidget* aWgt = NULL;
884 if (theType == "sketch-start-label") {
885 PartSet_WidgetSketchLabel* aLabelWgt = new PartSet_WidgetSketchLabel(theParent, aWorkshop,
886 theWidgetApi, myHasConstraintShown);
887 connect(aLabelWgt, SIGNAL(planeSelected(const std::shared_ptr<GeomAPI_Pln>&)),
888 mySketchMgr, SLOT(onPlaneSelected(const std::shared_ptr<GeomAPI_Pln>&)));
889 connect(aLabelWgt, SIGNAL(showConstraintToggled(int, bool)),
890 mySketchMgr, SLOT(onShowConstraintsToggle(int, bool)));
891 connect(aLabelWgt, SIGNAL(showFreePoints(bool)), mySketchMgr, SLOT(onShowPoints(bool)));
892 connect(aLabelWgt, SIGNAL(autoConstraints(bool)),
893 sketchReentranceMgr(), SLOT(onAutoConstraints(bool)));
894 aLabelWgt->setShowPointsState(mySketchMgr->isShowFreePointsShown());
896 } else if (theType == "sketch-2dpoint_selector") {
897 PartSet_WidgetPoint2D* aPointWgt = new PartSet_WidgetPoint2D(theParent, aWorkshop,
899 aPointWgt->setSketch(mySketchMgr->activeSketch());
900 connect(aPointWgt, SIGNAL(vertexSelected()), sketchReentranceMgr(), SLOT(onVertexSelected()));
902 }else if (theType == "sketch-2dpoint_flyout_selector") {
903 PartSet_WidgetPoint2DFlyout* aPointWgt = new PartSet_WidgetPoint2DFlyout(theParent, aWorkshop,
905 aPointWgt->setSketch(mySketchMgr->activeSketch());
906 connect(aPointWgt, SIGNAL(vertexSelected()), sketchReentranceMgr(), SLOT(onVertexSelected()));
908 } else if (theType == "sketch_shape_selector") {
909 PartSet_WidgetShapeSelector* aShapeSelectorWgt =
910 new PartSet_WidgetShapeSelector(theParent, aWorkshop, theWidgetApi);
911 aShapeSelectorWgt->setSketcher(mySketchMgr->activeSketch());
912 aWgt = aShapeSelectorWgt;
913 } else if (theType == "sketch_multi_selector") {
914 PartSet_WidgetMultiSelector* aShapeSelectorWgt =
915 new PartSet_WidgetMultiSelector(theParent, aWorkshop, theWidgetApi);
916 aShapeSelectorWgt->setSketcher(mySketchMgr->activeSketch());
917 aWgt = aShapeSelectorWgt;
919 else if (theType == "sketch_feature_point_selector") {
920 PartSet_WidgetFeaturePointSelector* aPointSelectorWgt =
921 new PartSet_WidgetFeaturePointSelector(theParent, aWorkshop, theWidgetApi);
922 aPointSelectorWgt->setSketcher(mySketchMgr->activeSketch());
923 aWgt = aPointSelectorWgt;
925 else if (theType == "sketch-bspline_selector") {
926 PartSet_WidgetBSplinePoints* aBSplineWgt =
927 new PartSet_WidgetBSplinePoints(theParent, aWorkshop, theWidgetApi);
928 aBSplineWgt->setSketch(mySketchMgr->activeSketch());
931 else if (theType == WDG_DOUBLEVALUE_EDITOR) {
932 aWgt = new PartSet_WidgetEditor(theParent, aWorkshop, theWidgetApi);
933 } else if (theType == "export_file_selector") {
934 aWgt = new PartSet_WidgetFileSelector(theParent, aWorkshop, theWidgetApi);
935 } else if (theType == "sketch_launcher") {
936 aWgt = new PartSet_WidgetSketchCreator(theParent, this, theWidgetApi);
938 else if (theType == "module_choice") {
939 aWgt = new ModuleBase_WidgetChoice(theParent, theWidgetApi);
940 connect(aWgt, SIGNAL(itemSelected(ModuleBase_ModelWidget*, int)),
941 this, SLOT(onChoiceChanged(ModuleBase_ModelWidget*, int)));
942 } else if (theType == "bspline-panel") {
943 PartSet_BSplineWidget* aPanel = new PartSet_BSplineWidget(theParent, theWidgetApi);
944 //aPanel->setFeature(theFeature);
950 //******************************************************
951 ModuleBase_ModelWidget* PartSet_Module::activeWidget() const
953 ModuleBase_ModelWidget* anActiveWidget = 0;
955 ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
957 return anActiveWidget;
959 ModuleBase_IPropertyPanel* aPanel = aOperation->propertyPanel();
961 return anActiveWidget;
963 return aPanel->activeWidget(true);
966 //******************************************************
967 bool PartSet_Module::deleteObjects()
969 bool isProcessed = false;
971 XGUI_Workshop* aWorkshop = getWorkshop();
972 XGUI_OperationMgr* anOpMgr = aWorkshop->operationMgr();
974 //SessionPtr aMgr = ModelAPI_Session::get();
975 // 1. check whether the delete should be processed in the module
976 ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
977 bool isSketchOp = PartSet_SketcherMgr::isSketchOperation(anOperation),
978 isNestedOp = sketchMgr()->isNestedSketchOperation(anOperation);
979 if (isSketchOp || isNestedOp) {
981 // 2. find selected presentations
982 // selected objects should be collected before the current operation abort because
983 // the abort leads to selection lost on constraint objects. It can be corrected after #386 issue
984 ModuleBase_ISelection* aSel = workshop()->selection();
985 QObjectPtrList aSelectedObj = aSel->selectedPresentations();
986 // if there are no selected objects in the viewer, that means that the selection in another
987 // place cased this method. It is necessary to return the false value to understande in above
988 // method that delete is not processed
989 if (aSelectedObj.count() == 0)
992 // avoid delete of the objects, which are not belong to the current sketch
993 // in order to do not delete results of other sketches
994 QObjectPtrList aSketchObjects;
995 QObjectPtrList::const_iterator anIt = aSelectedObj.begin(), aLast = aSelectedObj.end();
996 for ( ; anIt != aLast; anIt++) {
997 ObjectPtr anObject = *anIt;
998 if (mySketchMgr->isObjectOfSketch(anObject)) {
999 // sketch feature should be used in this list because workshop deletes features only
1000 // results are skipped
1001 FeaturePtr aSketchFeature = ModelAPI_Feature::feature(anObject);
1002 aSketchObjects.append(aSketchFeature);
1005 // if the selection contains only local selected presentations from other sketches,
1006 // the Delete operation should not be done at all
1007 if (aSketchObjects.size() == 0)
1010 // 3. start operation
1011 QString aDescription = aWorkshop->contextMenuMgr()->action("DELETE_CMD")->text();
1012 ModuleBase_Operation* anOpAction = new ModuleBase_Operation(aDescription, this);
1014 // the active nested sketch operation should be aborted unconditionally
1015 // the Delete action should be additionally granted for the Sketch operation
1016 // in order to do not abort/commit it
1018 if (!anOpMgr->canStartOperation(anOpAction->id(), isCommitted))
1019 return true; // the objects are processed but can not be deleted
1021 anOpMgr->startOperation(anOpAction);
1023 // WORKAROUND, should be done to avoid viewer highlight update after deletetion of objects
1024 // the problem is in AIS Dimensions recompute
1025 // if a line and the dim are removed, line is the first
1026 // it causes the AIS recompute, where the base line is null,
1027 // the result is empty AIS in the viewer
1028 XGUI_Tools::workshop(myWorkshop)->selector()->clearSelection();
1030 // 4. delete features
1031 // sketch feature should be skipped, only sub-features can be removed
1032 // when sketch operation is active
1033 aWorkshop->deleteFeatures(aSketchObjects);
1034 // 5. stop operation
1035 anOpMgr->commitOperation();
1040 //******************************************************
1041 void PartSet_Module::editFeature(FeaturePtr theFeature)
1043 storeConstraintsState(theFeature->getKind());
1044 ModuleBase_IModule::editFeature(theFeature);
1047 //******************************************************
1048 bool PartSet_Module::canCommitOperation() const
1053 //******************************************************
1054 void PartSet_Module::launchOperation(const QString& theCmdId, const bool& isStartAfterCommitOnly)
1056 myIsOperationIsLaunched = true;
1057 storeConstraintsState(theCmdId.toStdString());
1058 updateConstraintsState(theCmdId.toStdString());
1060 ModuleBase_IModule::launchOperation(theCmdId, isStartAfterCommitOnly);
1062 myIsOperationIsLaunched = false;
1065 //******************************************************
1066 void PartSet_Module::storeConstraintsState(const std::string& theFeatureKind)
1068 if (myWorkshop->currentOperation() &&
1069 myWorkshop->currentOperation()->id().toStdString() == SketchPlugin_Sketch::ID()) {
1070 const QMap<PartSet_Tools::ConstraintVisibleState, bool>& aShownStates =
1071 mySketchMgr->showConstraintStates();
1072 myHasConstraintShown = aShownStates;
1076 //******************************************************
1077 void PartSet_Module::updateConstraintsState(const std::string& theFeatureKind)
1079 if (PartSet_SketcherMgr::constraintsIdList().contains(theFeatureKind.c_str()) ||
1080 PartSet_SketcherMgr::replicationsIdList().contains(theFeatureKind.c_str())) {
1081 // Show constraints if a constraint was anOperation
1082 mySketchMgr->updateBySketchParameters(PartSet_Tools::Geometrical, true);
1083 mySketchMgr->updateBySketchParameters(PartSet_Tools::Dimensional, true);
1084 mySketchMgr->updateBySketchParameters(PartSet_Tools::Expressions,
1085 myHasConstraintShown[PartSet_Tools::Expressions]);
1089 //******************************************************
1090 void PartSet_Module::onObjectDisplayed(ObjectPtr theObject, AISObjectPtr theAIS)
1092 Handle(AIS_InteractiveObject) anAIS = theAIS->impl<Handle(AIS_InteractiveObject)>();
1093 if (!anAIS.IsNull()) {
1094 FeaturePtr aFeature = ModelAPI_Feature::feature(theObject);
1095 if (aFeature.get()) {
1096 bool aToUseZLayer = false;
1097 if (PartSet_Tools::findRefsToMeFeature(aFeature,SketchPlugin_Projection::ID()))
1098 aToUseZLayer = true;
1100 CompositeFeaturePtr aParent = ModelAPI_Tools::compositeOwner(aFeature);
1101 aToUseZLayer = (aParent.get() && (aParent->getKind() == SketchPlugin_Sketch::ID()));
1104 Handle(AIS_InteractiveContext) aCtx = anAIS->GetContext();
1105 if (aFeature->getKind() == SketchPlugin_ConstraintCoincidence::ID())
1106 aCtx->SetZLayer(anAIS, Graphic3d_ZLayerId_Top);
1108 aCtx->SetZLayer(anAIS, myVisualLayerId);
1114 //******************************************************
1115 void PartSet_Module::onBeforeObjectErase(ObjectPtr theObject, AISObjectPtr theAIS)
1118 // it should be recomputed in order to disappear in the viewer if the corresponded object
1120 //if (myCustomPrs->isActive())
1121 // myCustomPrs->redisplay(theObject, false);
1124 //******************************************************
1125 void PartSet_Module::onViewTransformed(int theTrsfType)
1127 // Set length of arrows constant in pixel size
1128 // if the operation is panning or rotate or panglobal then do nothing
1129 if ((theTrsfType == 1) || (theTrsfType == 3) || (theTrsfType == 4))
1131 ModuleBase_IViewer* aViewer = myWorkshop->viewer();
1132 Handle(AIS_InteractiveContext) aContext = aViewer->AISContext();
1133 if (aContext.IsNull())
1136 //Handle(V3d_View) aView = aViewer->activeView();
1138 XGUI_Workshop* aWorkshop = getWorkshop();
1139 XGUI_Displayer* aDisplayer = aWorkshop->displayer();
1140 Handle(V3d_Viewer) aV3dViewer = aContext->CurrentViewer();
1141 Handle(V3d_View) aView;
1143 for (aV3dViewer->InitDefinedViews();
1144 aV3dViewer->MoreDefinedViews();
1145 aV3dViewer->NextDefinedViews()) {
1146 Handle(V3d_View) aV = aV3dViewer->DefinedView();
1147 double aS = aV->Scale();
1156 bool isModified = false;
1157 double aLen = aView->Convert(SketcherPrs_Tools::getConfigArrowSize());
1158 ModuleBase_Operation* aCurrentOperation = myWorkshop->currentOperation();
1159 if (aCurrentOperation &&
1160 (PartSet_SketcherMgr::isSketchOperation(aCurrentOperation) ||
1161 sketchMgr()->isNestedSketchOperation(aCurrentOperation) ||
1162 (aCurrentOperation->id() == "Measurement")))
1164 SketcherPrs_Tools::setArrowSize(aLen);
1165 const double aCurScale = aViewer->activeView()->Camera()->Scale();
1166 aViewer->SetScale(aViewer->activeView(), aCurScale);
1168 QList<Handle(AIS_InteractiveObject)> aPrsList = aDisplayer->displayedPresentations();
1169 foreach(Handle(AIS_InteractiveObject) aAisObj, aPrsList) {
1171 QList<AISObjectPtr> aPrsList = aDisplayer->displayedPresentations();
1172 foreach(AISObjectPtr aAIS, aPrsList) {
1173 Handle(AIS_InteractiveObject) aAisObj = aAIS->impl<Handle(AIS_InteractiveObject)>();
1175 Handle(AIS_Dimension) aDim = Handle(AIS_Dimension)::DownCast(aAisObj);
1176 if (!aDim.IsNull()) {
1177 aDim->DimensionAspect()->ArrowAspect()->SetLength(aLen);
1178 aContext->Redisplay(aDim, false);
1184 // Manage trihedron arrows
1185 if (Config_PropManager::boolean("Visualization", "zoom_trihedron_arrows")) {
1186 Handle(AIS_Trihedron) aTrihedron = aViewer->trihedron();
1187 if (!aTrihedron.IsNull()) {
1189 aView->Convert(Config_PropManager::integer("Visualization", "axis_arrow_size"));
1190 Handle(Prs3d_DatumAspect) aDatumAspect = aTrihedron->Attributes()->DatumAspect();
1191 double aAxisLen = aDatumAspect->AxisLength(Prs3d_DP_XAxis);
1192 aDatumAspect->SetAttribute(Prs3d_DP_ShadingConeLengthPercent, aAxLen / aAxisLen);
1193 aTrihedron->Attributes()->SetDatumAspect(aDatumAspect);
1194 aContext->Redisplay(aTrihedron, false);
1199 aDisplayer->updateViewer();
1202 //******************************************************
1203 bool PartSet_Module::isCustomPrsActivated(const ModuleBase_CustomizeFlag& theFlag) const
1205 return myCustomPrs->isActive(theFlag);
1208 //******************************************************
1209 void PartSet_Module::activateCustomPrs(const FeaturePtr& theFeature,
1210 const ModuleBase_CustomizeFlag& theFlag,
1211 const bool theUpdateViewer)
1213 myCustomPrs->activate(theFeature, theFlag, theUpdateViewer);
1216 //******************************************************
1217 void PartSet_Module::deactivateCustomPrs(const ModuleBase_CustomizeFlag& theFlag,
1218 const bool theUpdateViewer)
1220 myCustomPrs->deactivate(theFlag, theUpdateViewer);
1223 //******************************************************
1224 //bool PartSet_Module::customisePresentation(ResultPtr theResult, AISObjectPtr thePrs,
1225 // std::shared_ptr<GeomAPI_ICustomPrs> theCustomPrs)
1227 // bool aCustomized = false;
1229 // XGUI_Workshop* aWorkshop = getWorkshop();
1230 // XGUI_Displayer* aDisplayer = aWorkshop->displayer();
1231 // ObjectPtr anObject = aDisplayer->getObject(thePrs);
1233 // return aCustomized;
1235 // if (!theResult.get()) {
1236 // std::vector<int> aColor;
1237 // XGUI_CustomPrs::getDefaultColor(anObject, true, aColor);
1238 // if (!aColor.empty()) {
1239 // aCustomized = thePrs->setColor(aColor[0], aColor[1], aColor[2]);
1242 // // customize dimentional constrains
1243 // sketchMgr()->customisePresentation(anObject);
1245 // return aCustomized;
1248 ////******************************************************
1249 //bool PartSet_Module::afterCustomisePresentation(std::shared_ptr<ModelAPI_Result> theResult,
1250 // AISObjectPtr thePrs,
1251 // GeomCustomPrsPtr theCustomPrs)
1253 // bool aCustomized = false;
1255 // XGUI_Workshop* aWorkshop = getWorkshop();
1256 // XGUI_Displayer* aDisplayer = aWorkshop->displayer();
1257 // ObjectPtr anObject = aDisplayer->getObject(thePrs);
1259 // return aCustomized;
1261 // std::vector<int> aColor;
1262 // bool aUseCustomColor = true;
1263 // if (aUseCustomColor)
1264 // myOverconstraintListener->getCustomColor(anObject, aColor);
1265 // // customize sketch symbol presentation
1266 // Handle(AIS_InteractiveObject) anAISIO = thePrs->impl<Handle(AIS_InteractiveObject)>();
1267 // if (!anAISIO.IsNull()) {
1268 // if (!Handle(SketcherPrs_SymbolPrs)::DownCast(anAISIO).IsNull()) {
1269 // Handle(SketcherPrs_SymbolPrs) aPrs = Handle(SketcherPrs_SymbolPrs)::DownCast(anAISIO);
1270 // if (!aPrs.IsNull()) {
1271 // aPrs->SetCustomColor(aColor);
1272 // aCustomized = true;
1274 // } else if (!Handle(SketcherPrs_Coincident)::DownCast(anAISIO).IsNull()) {
1275 // Handle(SketcherPrs_Coincident) aPrs = Handle(SketcherPrs_Coincident)::DownCast(anAISIO);
1276 // if (!aPrs.IsNull()) {
1277 // aPrs->SetCustomColor(aColor);
1278 // aCustomized = true;
1282 // // customize sketch dimension constraint presentation
1283 // if (!aCustomized) {
1284 // if (!aColor.empty()) { // otherwise presentation has the default color
1285 // aCustomized = thePrs->setColor(aColor[0], aColor[1], aColor[2]);
1288 // return aCustomized;
1291 //******************************************************
1292 bool PartSet_Module::customizeFeature(ObjectPtr theObject, const ModuleBase_CustomizeFlag& theFlag,
1293 const bool theUpdateViewer)
1295 bool isRedisplayed = false;
1296 if (myCustomPrs->isActive(theFlag))
1297 isRedisplayed = myCustomPrs->redisplay(theObject, theFlag, theUpdateViewer);
1299 return isRedisplayed;
1302 //******************************************************
1303 void PartSet_Module::customizeObjectBrowser(QWidget* theObjectBrowser)
1305 XGUI_ObjectsBrowser* aOB = dynamic_cast<XGUI_ObjectsBrowser*>(theObjectBrowser);
1307 QLabel* aLabel = aOB->activeDocLabel();
1308 aLabel->installEventFilter(myMenuMgr);
1309 connect(aLabel, SIGNAL(customContextMenuRequested(const QPoint&)),
1310 SLOT(onActiveDocPopup(const QPoint&)));
1311 aOB->treeView()->setExpandsOnDoubleClick(false);
1312 connect(aOB->treeView(), SIGNAL(doubleClicked(const QModelIndex&)),
1313 SLOT(onTreeViewDoubleClick(const QModelIndex&)));
1315 Events_Loop* aLoop = Events_Loop::loop();
1316 aLoop->registerListener(this, Events_Loop::eventByName(EVENT_OBJECT_CREATED));
1320 //******************************************************
1321 void PartSet_Module::onActiveDocPopup(const QPoint& thePnt)
1323 SessionPtr aMgr = ModelAPI_Session::get();
1324 QAction* aActivatePartAction = myMenuMgr->action("ACTIVATE_PARTSET_CMD");
1326 XGUI_Workshop* aWorkshop = getWorkshop();
1327 QLabel* aHeader = aWorkshop->objectBrowser()->activeDocLabel();
1329 aActivatePartAction->setEnabled((aMgr->activeDocument() != aMgr->moduleDocument()));
1332 aMenu.addAction(aActivatePartAction);
1335 if (aMgr->activeDocument() == aMgr->moduleDocument()) {
1336 DocumentPtr aDoc = aMgr->moduleDocument();
1337 int aNbParts = aDoc->size(ModelAPI_ResultPart::group());
1338 bool aHaveToActivate = false;
1339 for (int i = 0; i < aNbParts; i++) {
1340 ObjectPtr aObj = aDoc->object(ModelAPI_ResultPart::group(), i);
1341 ResultPartPtr aPartRes = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aObj);
1342 if (!aPartRes->partDoc().get()) {
1343 aHaveToActivate = true;
1347 if (aHaveToActivate) {
1348 QAction* aActivateAllPartAction = myMenuMgr->action("ACTIVATE_ALL_PARTS_CMD");
1349 aMenu.addAction(aActivateAllPartAction);
1354 aMenu.exec(aHeader->mapToGlobal(thePnt));
1357 //******************************************************
1358 AISObjectPtr PartSet_Module::createPresentation(const ObjectPtr& theObject)
1360 Handle(AIS_InteractiveObject) anAISPrs = mySketchMgr->createPresentation(theObject);
1361 if (anAISPrs.IsNull()) {
1362 ResultPtr aResult = std::dynamic_pointer_cast<ModelAPI_Result>(theObject);
1363 if (aResult.get()) {
1364 std::shared_ptr<GeomAPI_Shape> aShapePtr = ModelAPI_Tools::shape(aResult);
1365 if (aShapePtr.get() != NULL)
1366 anAISPrs = new ModuleBase_ResultPrs(aResult);
1369 FieldStepPtr aStep =
1370 std::dynamic_pointer_cast<ModelAPI_ResultField::ModelAPI_FieldStep>(theObject);
1372 anAISPrs = new PartSet_FieldStepPrs(aStep);
1377 if (!anAISPrs.IsNull()) {
1378 Handle(AIS_Shape) aShapePrs = Handle(AIS_Shape)::DownCast(anAISPrs);
1379 if (!aShapePrs.IsNull())
1380 ModuleBase_Tools::setPointBallHighlighting((AIS_Shape*)aShapePrs.get());
1382 anAIS = AISObjectPtr(new GeomAPI_AISObject());
1383 anAIS->setImpl(new Handle(AIS_InteractiveObject)(anAISPrs));
1384 customizePresentation(theObject, anAIS);
1389 //******************************************************
1390 double getResultDeflection(const ResultPtr& theResult)
1392 double aDeflection = ModelAPI_Tools::getDeflection(theResult);
1393 if (aDeflection < 0)
1394 aDeflection = PartSet_Tools::getDefaultDeflection(theResult);
1398 //******************************************************
1399 double getResultTransparency(const ResultPtr& theResult)
1401 double aTransparency = ModelAPI_Tools::getTransparency(theResult);
1402 if (aTransparency < 0)
1403 aTransparency = PartSet_Tools::getDefaultTransparency();
1404 return aTransparency;
1407 static AttributeImagePtr findImage(const ObjectPtr& theResult)
1409 AttributeImagePtr anImageAttr;
1411 if (theResult.get()) {
1412 ResultBodyPtr aResultBody =
1413 std::dynamic_pointer_cast<ModelAPI_ResultBody>(theResult);
1414 if (aResultBody.get()) {
1415 anImageAttr = aResultBody->data()->image(ModelAPI_ResultBody::IMAGE_ID());
1416 if (!anImageAttr.get() || !anImageAttr->hasTexture()) {
1417 // try to find an image attribute in parents
1418 ObjectPtr aParent = theResult->document()->parent(theResult);
1419 anImageAttr = findImage(aParent);
1427 //******************************************************
1428 void PartSet_Module::setTexture(const AISObjectPtr& thePrs,
1429 const ResultPtr& theResult)
1431 ResultBodyPtr aResultBody =
1432 std::dynamic_pointer_cast<ModelAPI_ResultBody>(theResult);
1433 if (!aResultBody.get())
1436 AttributeImagePtr anImageAttr = findImage(theResult);
1437 if (!anImageAttr.get() || !anImageAttr->hasTexture())
1440 int aWidth, aHeight;
1441 std::string aFormat;
1442 std::list<unsigned char> aByteList;
1443 anImageAttr->texture(aWidth, aHeight, aByteList, aFormat);
1445 Handle(AIS_InteractiveObject) anAIS = thePrs->impl<Handle(AIS_InteractiveObject)>();
1446 if (!anAIS.IsNull()) {
1447 /// set color to white and change material aspect,
1448 /// in order to keep a natural apect of the image.
1449 thePrs->setColor(255, 255, 255);
1450 Quantity_Color myShadingColor(NCollection_Vec3<float>(1., 1., 1.));
1451 Handle(AIS_Shape) anAISShape = Handle(AIS_Shape)::DownCast(anAIS);
1452 if (!anAISShape.IsNull())
1454 auto myDrawer = anAISShape->Attributes();
1456 myDrawer->ShadingAspect()->SetColor(myShadingColor);
1457 myDrawer->ShadingAspect()->Aspect()->SetDistinguishOn();
1458 Graphic3d_MaterialAspect aMatAspect(Graphic3d_NOM_PLASTIC);
1459 aMatAspect.SetTransparency(0.0);
1460 myDrawer->ShadingAspect()->Aspect()->SetFrontMaterial(aMatAspect);
1461 myDrawer->ShadingAspect()->Aspect()->SetBackMaterial(aMatAspect);
1463 //aPixmap = OCCViewer_Utilities::imageToPixmap( px.toImage());
1464 Handle(Image_PixMap) aPixmap = new Image_PixMap();
1465 aPixmap->InitTrash(Image_PixMap::ImgBGRA, aWidth, aHeight);
1466 std::list<unsigned char>::iterator aByteIter = aByteList.begin();
1467 for (int aLine = 0; aLine < aHeight; ++aLine) {
1468 // convert pixels from ARGB to renderer-compatible RGBA
1469 for (int aByte = 0; aByte < aWidth; ++aByte) {
1470 Image_ColorBGRA& aPixmapBytes = aPixmap->ChangeValue<Image_ColorBGRA>(aLine, aByte);
1472 aPixmapBytes.b() = (Standard_Byte) *aByteIter++;
1473 aPixmapBytes.g() = (Standard_Byte) *aByteIter++;
1474 aPixmapBytes.r() = (Standard_Byte) *aByteIter++;
1475 aPixmapBytes.a() = (Standard_Byte) *aByteIter++;
1479 anAISShape->Attributes()->ShadingAspect()->Aspect()->SetTextureMap
1480 (new Graphic3d_Texture2Dmanual(aPixmap));
1481 anAISShape->Attributes()->ShadingAspect()->Aspect()->SetTextureMapOn();
1483 anAISShape->SetDisplayMode(AIS_Shaded);
1488 //******************************************************
1489 void PartSet_Module::customizePresentation(const ObjectPtr& theObject,
1490 const AISObjectPtr& thePrs) const
1492 if (mySketchMgr->isObjectOfSketch(theObject)) {
1493 mySketchMgr->customizeSketchPresentation(theObject, thePrs);
1496 ResultPtr aResult = std::dynamic_pointer_cast<ModelAPI_Result>(theObject);
1497 FeaturePtr aFeature = ModelAPI_Feature::feature(theObject);
1498 if (aResult.get()) {
1499 std::vector<int> aColor;
1500 bool isSameDoc = (ModelAPI_Session::get()->activeDocument() == aResult->document());
1501 // Get user defined color for the object
1502 ModelAPI_Tools::getColor(aResult, aColor);
1504 bool isCustomized = false;
1505 if (aColor.empty() && aFeature.get()) {
1506 GeomCustomPrsPtr aCustPrs = std::dynamic_pointer_cast<GeomAPI_ICustomPrs>(aFeature);
1507 if (aCustPrs.get()) {
1508 isCustomized = aCustPrs->customisePresentation(aResult, thePrs);
1511 if (!isCustomized) {
1512 if (aColor.empty()) {
1513 PartSet_Tools::getDefaultColor(aResult, false, aColor);
1515 thePrs->setColor(aColor[0], aColor[1], aColor[2]);
1519 if (aColor.empty()) {
1520 PartSet_Tools::getDefaultColor(aResult, false, aColor);
1522 QColor aQColor(aColor[0], aColor[1], aColor[2]);
1524 QColor::fromHsvF(aQColor.hueF(), aQColor.saturationF() / 3., aQColor.valueF());
1525 thePrs->setColor(aNewColor.red(), aNewColor.green(), aNewColor.blue());
1527 thePrs->setDeflection(getResultDeflection(aResult));
1528 thePrs->setTransparency(getResultTransparency(aResult));
1530 /// set texture parameters, if any
1531 setTexture(thePrs, aResult);
1533 if (aFeature.get() && (aFeature->getKind() == SketchPlugin_Sketch::ID())) {
1534 thePrs->setWidth(2);
1540 //******************************************************
1541 ObjectPtr PartSet_Module::findPresentedObject(const AISObjectPtr& theAIS) const
1544 ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
1546 /// If last line finished on vertex the lines creation sequence has to be break
1547 ModuleBase_IPropertyPanel* aPanel = aOperation->propertyPanel();
1549 ModuleBase_ModelWidget* anActiveWidget = aPanel->activeWidget();
1550 // if there is an active widget, find the presented object in it
1551 if (!anActiveWidget)
1552 anActiveWidget = aPanel->preselectionWidget();
1554 ModuleBase_WidgetValidated* aWidgetValidated = dynamic_cast<ModuleBase_WidgetValidated*>
1556 if (aWidgetValidated)
1557 anObject = aWidgetValidated->findPresentedObject(theAIS);
1563 //******************************************************
1564 bool PartSet_Module::canBeShaded(Handle(AIS_InteractiveObject) theAIS) const
1566 bool aCanBeShaged = true;
1568 Handle(PartSet_ResultSketchPrs) aPrs = Handle(PartSet_ResultSketchPrs)::DownCast(theAIS);
1570 aCanBeShaged = false;
1572 return aCanBeShaged;
1575 //******************************************************
1576 void PartSet_Module::addObjectBrowserMenu(QMenu* theMenu) const
1578 QObjectPtrList aObjects = myWorkshop->selection()->selectedObjects();
1579 int aSelected = aObjects.size();
1580 SessionPtr aMgr = ModelAPI_Session::get();
1581 QAction* aActivatePartAction = myMenuMgr->action("ACTIVATE_PART_CMD");
1583 bool hasResult = false;
1584 bool hasFeature = false;
1585 bool hasParameter = false;
1586 bool hasCompositeOwner = false;
1587 bool hasResultInHistory = false;
1588 bool hasFolder = false;
1589 ModuleBase_Tools::checkObjects(aObjects, hasResult, hasFeature, hasParameter,
1590 hasCompositeOwner, hasResultInHistory, hasFolder);
1592 ModuleBase_Operation* aCurrentOp = myWorkshop->currentOperation();
1593 if (aSelected == 1) {
1594 ObjectPtr aObject = aObjects.first();
1596 ResultPartPtr aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aObject);
1597 FeaturePtr aFeature = std::dynamic_pointer_cast<ModelAPI_Feature>(aObject);
1598 bool isPart = aPart.get() ||
1599 (aFeature.get() && (aFeature->getKind() == PartSetPlugin_Part::ID()));
1601 DocumentPtr aPartDoc;
1603 aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aFeature->firstResult());
1605 if (aPart.get()) // this may be null is Part feature is disabled
1606 aPartDoc = aPart->partDoc();
1608 theMenu->addAction(aActivatePartAction);
1609 aActivatePartAction->setEnabled((aMgr->activeDocument() != aPartDoc));
1611 } else if (aObject->document() == aMgr->activeDocument()) {
1612 if (hasParameter || hasFeature) {
1613 myMenuMgr->action("EDIT_CMD")->setEnabled(true);
1614 theMenu->addAction(myMenuMgr->action("EDIT_CMD"));
1615 if (aCurrentOp && aFeature.get()) {
1616 if (aCurrentOp->id().toStdString() == aFeature->getKind())
1617 myMenuMgr->action("EDIT_CMD")->setEnabled(false);
1624 myMenuMgr->action("EDIT_CMD")->setEnabled(aCurrentOp == 0);
1625 theMenu->addAction(myMenuMgr->action("EDIT_CMD"));
1626 theMenu->addSeparator();
1629 bool aNotDeactivate = (aCurrentOp == 0);
1630 if (!aNotDeactivate) {
1631 aActivatePartAction->setEnabled(false);
1635 //******************************************************
1636 #define EXPAND_PARENT(OBJ) \
1637 QModelIndex aObjIndex = aDataModel->objectIndex(OBJ); \
1638 if (aObjIndex.isValid()) { \
1639 QModelIndex aParent = aObjIndex.parent(); \
1640 int aCount = aDataModel->rowCount(aParent); \
1642 aTreeView->setExpanded(aParent, true); \
1645 //******************************************************
1646 void PartSet_Module::processEvent(const std::shared_ptr<Events_Message>& theMessage)
1648 if (theMessage->eventID() == Events_Loop::loop()->eventByName(EVENT_DOCUMENT_CHANGED)) {
1649 SessionPtr aMgr = ModelAPI_Session::get();
1650 if (!aMgr->hasModuleDocument()) // if document is closed, do not call the document creation
1652 // Do not change activation of parts if an operation active
1653 static QStringList aAllowActivationList;
1654 if (aAllowActivationList.isEmpty())
1655 aAllowActivationList <<
1656 QString(PartSetPlugin_Part::ID().c_str()) <<
1657 QString(PartSetPlugin_Duplicate::ID().c_str()) <<
1658 QString(PartSetPlugin_Remove::ID().c_str());
1659 if (myWorkshop->currentOperation() &&
1660 (!aAllowActivationList.contains(myWorkshop->currentOperation()->id())))
1662 XGUI_Workshop* aWorkshop = getWorkshop();
1663 bool needUpdate = false;
1664 XGUI_DataTree* aTreeView = 0;
1665 if (aWorkshop->objectBrowser()) {
1666 aTreeView = aWorkshop->objectBrowser()->treeView();
1667 QLabel* aLabel = aWorkshop->objectBrowser()->activeDocLabel();
1668 QPalette aPalet = aLabel->palette();
1670 DocumentPtr aActiveDoc = aMgr->activeDocument();
1672 // Clear active part index if there is no Part documents
1673 // It could be not null if document was closed and opened a new
1674 // without closeDocument call
1675 if (aMgr->allOpenedDocuments().size() <= 1)
1676 myActivePartIndex = QModelIndex();
1678 XGUI_DataModel* aDataModel = aWorkshop->objectBrowser()->dataModel();
1679 QModelIndex aOldActive = myActivePartIndex;
1680 myActivePartIndex = aDataModel->documentRootIndex(aActiveDoc, 0);
1681 if (myActivePartIndex.isValid()) {
1682 needUpdate = aTreeView->isExpanded(myActivePartIndex);
1684 aTreeView->setExpanded(myActivePartIndex, true);
1686 if ((aOldActive != myActivePartIndex) && (aOldActive.isValid()))
1687 aTreeView->setExpanded(aOldActive, false);
1689 aLabel->setPalette(aPalet);
1691 aWorkshop->updateCommandStatus();
1693 // Update displayed objects in order to update active color
1694 XGUI_Displayer* aDisplayer = aWorkshop->displayer();
1695 QObjectPtrList aObjects = aDisplayer->displayedObjects();
1697 foreach(ObjectPtr aObj, aObjects) {
1698 aHidden = !aObj->data() || !aObj->data()->isValid() ||
1699 aObj->isDisabled() || (!aObj->isDisplayed());
1701 aDisplayer->redisplay(aObj, false);
1704 aDisplayer->updateViewer();
1705 // Update tree items if they are expanded
1707 aTreeView->viewport()->update(aTreeView->viewport()->rect());
1709 } else if (theMessage->eventID() == Events_Loop::loop()->eventByName(EVENT_OBJECT_CREATED)) {
1710 std::shared_ptr<ModelAPI_ObjectUpdatedMessage> aUpdMsg =
1711 std::dynamic_pointer_cast<ModelAPI_ObjectUpdatedMessage>(theMessage);
1712 std::set<ObjectPtr> aObjects = aUpdMsg->objects();
1714 ObjectPtr aConstrObj;
1715 ObjectPtr aResultObj;
1716 std::set<ObjectPtr>::const_iterator aIt;
1717 DocumentPtr aRootDoc = ModelAPI_Session::get()->moduleDocument();
1718 for (aIt = aObjects.begin(); aIt != aObjects.end(); ++aIt) {
1719 ObjectPtr aObject = (*aIt);
1720 if ((!aResultObj.get()) && (aObject->groupName() == ModelAPI_ResultBody::group())
1721 && (aObject->document() != aRootDoc))
1722 aResultObj = aObject;
1723 if ((!aConstrObj.get()) && (aObject->groupName() == ModelAPI_ResultConstruction::group())
1724 && (aObject->document() != aRootDoc))
1725 aConstrObj = aObject;
1726 if (aResultObj.get() && aConstrObj.get())
1730 if (aResultObj.get() || aConstrObj.get()) {
1731 XGUI_Workshop* aWorkshop = getWorkshop();
1732 XGUI_DataTree* aTreeView = aWorkshop->objectBrowser()->treeView();
1733 XGUI_DataModel* aDataModel = aWorkshop->objectBrowser()->dataModel();
1735 if (aResultObj.get()) {
1736 EXPAND_PARENT(aResultObj)
1738 if (aConstrObj.get()) {
1739 EXPAND_PARENT(aConstrObj)
1743 else if (theMessage->eventID() == Events_Loop::loop()->eventByName(EVENT_OBJECT_TO_REDISPLAY)) {
1744 CompositeFeaturePtr aSketch = mySketchMgr->activeSketch();
1745 if (aSketch.get()) {
1746 ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
1747 if (PartSet_SketcherMgr::isSketchOperation(anOperation) &&
1748 mySketchMgr->previewSketchPlane()->isDisplayed())
1749 mySketchMgr->previewSketchPlane()->createSketchPlane(aSketch, myWorkshop);
1754 //******************************************************
1755 void PartSet_Module::onTreeViewDoubleClick(const QModelIndex& theIndex)
1757 if (myWorkshop->currentOperation()) // Do not change activation of parts if an operation active
1759 SessionPtr aMgr = ModelAPI_Session::get();
1760 if (!theIndex.isValid()) {
1761 // It seems that this code is obsolete
1762 //aMgr->setActiveDocument(aMgr->moduleDocument());
1765 if (theIndex.column() != 1) // Use only first column
1768 XGUI_Workshop* aWorkshop = getWorkshop();
1769 XGUI_DataModel* aDataModel = aWorkshop->objectBrowser()->dataModel();
1770 // De not use non editable Indexes
1771 if ((aDataModel->flags(theIndex) & Qt::ItemIsSelectable) == 0)
1773 ObjectPtr aObj = aDataModel->object(theIndex);
1775 ResultPartPtr aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aObj);
1776 if (!aPart.get()) { // Probably this is Feature
1777 FeaturePtr aPartFeature = std::dynamic_pointer_cast<ModelAPI_Feature>(aObj);
1778 if (aPartFeature.get() && (aPartFeature->getKind() == PartSetPlugin_Part::ID())) {
1779 aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aPartFeature->firstResult());
1783 if (!aPart.get() && aObj->groupName() == ModelAPI_ResultParameter::group())
1785 QObjectPtrList aObjects = aWorkshop->objectBrowser()->selectedObjects();
1786 FeaturePtr aFeature;
1787 ResultParameterPtr aParam;
1788 foreach(ObjectPtr aObj, aObjects) {
1789 aParam = std::dynamic_pointer_cast<ModelAPI_ResultParameter>(aObj);
1794 aFeature = ModelAPI_Feature::feature(aParam);
1797 editFeature(aFeature);
1801 if (aPart.get()) { // if this is a part
1802 if (aPart->partDoc() == aMgr->activeDocument()) {
1803 myMenuMgr->activatePartSet();
1805 myMenuMgr->activatePart(aPart);
1810 //******************************************************
1811 void PartSet_Module::onViewCreated(ModuleBase_IViewWindow*)
1813 // z layer is created for all started operations in order to visualize operation AIS presentation
1815 Handle(AIS_InteractiveContext) aContext = myWorkshop->viewer()->AISContext();
1816 if (aContext.IsNull())
1819 Handle(V3d_Viewer) aViewer = aContext->CurrentViewer();
1820 if (myVisualLayerId == 0) {
1821 if (myVisualLayerId == 0)
1822 aViewer->AddZLayer(myVisualLayerId);
1824 TColStd_SequenceOfInteger aZList;
1825 aViewer->GetAllZLayers(aZList);
1826 bool aFound = false;
1827 for (int i = 1; i <= aZList.Length(); i++) {
1828 if (aZList(i) == myVisualLayerId) {
1834 aViewer->AddZLayer(myVisualLayerId);
1836 // if there is an active operation with validated widget,
1837 // the filters of this widget should be activated in the created view
1838 myWorkshop->selectionActivate()->updateSelectionFilters();
1839 myWorkshop->selectionActivate()->updateSelectionModes();
1842 //******************************************************
1843 void PartSet_Module::widgetStateChanged(int thePreviousState)
1845 mySketchMgr->widgetStateChanged(thePreviousState);
1848 //******************************************************
1849 bool PartSet_Module::processEnter(const std::string& thePreviousAttributeID)
1851 return mySketchReentrantMgr->processEnter(thePreviousAttributeID);
1854 //******************************************************
1855 void PartSet_Module::beforeOperationStopped(ModuleBase_Operation* theOperation)
1857 if (PartSet_SketcherMgr::isSketchOperation(theOperation)) {
1858 mySketchMgr->stopSketch(theOperation);
1862 //******************************************************
1863 GeomShapePtr PartSet_Module::findShape(const AttributePtr& theAttribute)
1865 GeomShapePtr aGeomShape;
1867 ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
1868 if (anOperation && sketchMgr()->isNestedSketchOperation(anOperation)) {
1869 aGeomShape = PartSet_Tools::findShapeBy2DPoint(theAttribute, myWorkshop);
1874 //******************************************************
1875 AttributePtr PartSet_Module::findAttribute(const ObjectPtr& theObject,
1876 const GeomShapePtr& theGeomShape)
1878 AttributePtr anAttribute;
1879 GeomShapePtr aGeomShape = theGeomShape;
1880 if (!aGeomShape.get()) {
1881 // processing shape of result, e.g. sketch circle center is selected, this is a result
1882 // the geom shape is empty, the shape of result should be used
1883 ResultPtr aResult = std::dynamic_pointer_cast<ModelAPI_Result>(theObject);
1884 if (aResult.get()) {
1885 aGeomShape = aResult->shape();
1889 if (aGeomShape.get()) {
1890 TopoDS_Shape aTDSShape = aGeomShape->impl<TopoDS_Shape>();
1891 std::pair<AttributePtr, int> anAttrAndIndex =
1892 PartSet_Tools::findAttributeBy2dPoint(theObject, aTDSShape, mySketchMgr->activeSketch());
1893 return anAttrAndIndex.first;
1898 //******************************************************
1899 std::shared_ptr<Events_Message> PartSet_Module::reentrantMessage()
1901 return sketchReentranceMgr()->reentrantMessage();
1904 //******************************************************
1905 void PartSet_Module::setReentrantPreSelection(const std::shared_ptr<Events_Message>& theMessage)
1907 sketchReentranceMgr()->setReentrantPreSelection(theMessage);
1910 //******************************************************
1911 void PartSet_Module::onChoiceChanged(ModuleBase_ModelWidget* theWidget,
1914 ModuleBase_WidgetChoice* aChoiceWidget = dynamic_cast<ModuleBase_WidgetChoice*>(theWidget);
1918 QString aChoiceTitle = aChoiceWidget->getPropertyPanelTitle(theIndex);
1919 if (!aChoiceTitle.isEmpty()) {
1920 ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
1923 ModuleBase_IPropertyPanel* aPanel = aOperation->propertyPanel();
1925 aPanel->setWindowTitle(aChoiceTitle);
1929 //******************************************************
1930 XGUI_Workshop* PartSet_Module::getWorkshop() const
1932 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
1933 return aConnector->workshop();
1936 void PartSet_Module::setDefaultConstraintShown()
1938 myHasConstraintShown[PartSet_Tools::Geometrical] = true;
1939 myHasConstraintShown[PartSet_Tools::Dimensional] = true;
1940 myHasConstraintShown[PartSet_Tools::Expressions] = false;
1943 //******************************************************
1944 ModuleBase_ITreeNode* PartSet_Module::rootNode() const
1949 //******************************************************
1950 void PartSet_Module::disableCustomMode(ModuleBase_CustomizeFlag theMode) {
1951 myCustomPrs->disableCustomMode(theMode);
1954 //******************************************************
1955 void PartSet_Module::enableCustomModes() {
1956 myCustomPrs->enableCustomModes();
1959 //******************************************************
1960 void PartSet_Module::onConflictingConstraints()
1962 const std::set<ObjectPtr>& aConstraints = myOverconstraintListener->conflictingObjects();
1963 QObjectPtrList aObjectsList;
1964 std::set<ObjectPtr>::const_iterator aIt;
1965 for (aIt = aConstraints.cbegin(); aIt != aConstraints.cend(); aIt++) {
1966 if (mySketchReentrantMgr->isLastAutoConstraint(*aIt))
1967 aObjectsList.append(*aIt);
1969 if (aObjectsList.size() > 0) {
1970 XGUI_Workshop* aWorkshop = getWorkshop();
1971 QString aDescription = aWorkshop->contextMenuMgr()->action("DELETE_CMD")->text();
1972 ModuleBase_Operation* anOpAction = new ModuleBase_Operation(aDescription);
1973 XGUI_OperationMgr* anOpMgr = aWorkshop->operationMgr();
1975 ModuleBase_Operation* anOp = anOpMgr->currentOperation();
1976 if (sketchMgr()->isNestedSketchOperation(anOp))
1979 anOpMgr->startOperation(anOpAction);
1980 aWorkshop->deleteFeatures(aObjectsList);
1981 anOpMgr->commitOperation();
1982 ModuleBase_Tools::flushUpdated(sketchMgr()->activeSketch());