1 // Copyright (C) 2014-2019 CEA/DEN, EDF R&D
3 // This library is free software; you can redistribute it and/or
4 // modify it under the terms of the GNU Lesser General Public
5 // License as published by the Free Software Foundation; either
6 // version 2.1 of the License, or (at your option) any later version.
8 // This library is distributed in the hope that it will be useful,
9 // but WITHOUT ANY WARRANTY; without even the implied warranty of
10 // MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
11 // Lesser General Public License for more details.
13 // You should have received a copy of the GNU Lesser General Public
14 // License along with this library; if not, write to the Free Software
15 // Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
17 // See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
20 #include "PartSet_Module.h"
21 #include "PartSet_WidgetSketchLabel.h"
22 #include "PartSet_Validators.h"
23 #include "PartSet_Tools.h"
24 #include "PartSet_PreviewPlanes.h"
25 #include "PartSet_WidgetBSplinePoints.h"
26 #include "PartSet_WidgetPoint2d.h"
27 #include "PartSet_WidgetPoint2DFlyout.h"
28 #include "PartSet_WidgetShapeSelector.h"
29 #include "PartSet_WidgetMultiSelector.h"
30 #include "PartSet_WidgetFeaturePointSelector.h"
31 #include "PartSet_WidgetEditor.h"
32 #include "PartSet_WidgetFileSelector.h"
33 #include "PartSet_WidgetSketchCreator.h"
34 #include "PartSet_SketcherMgr.h"
35 #include "PartSet_SketcherReentrantMgr.h"
36 #include "PartSet_ResultSketchPrs.h"
37 #include "PartSet_MenuMgr.h"
38 #include "PartSet_CustomPrs.h"
39 #include "PartSet_IconFactory.h"
40 #include "PartSet_OverconstraintListener.h"
41 #include "PartSet_TreeNodes.h"
42 #include "PartSet_FieldStepPrs.h"
44 #include "PartSet_Filters.h"
45 #include "PartSet_FilterInfinite.h"
51 #include <PartSetPlugin_Remove.h>
52 #include <PartSetPlugin_Part.h>
53 #include <PartSetPlugin_Duplicate.h>
55 #include <SketchPlugin_ConstraintCoincidence.h>
57 #include <ModuleBase_Operation.h>
58 #include <ModuleBase_IViewer.h>
59 #include <ModuleBase_IViewWindow.h>
60 #include <ModuleBase_IPropertyPanel.h>
61 #include <ModuleBase_ISelectionActivate.h>
62 #include <ModuleBase_WidgetChoice.h>
63 #include <ModuleBase_WidgetEditor.h>
64 #include <ModuleBase_WidgetValidated.h>
65 #include <ModuleBase_Tools.h>
66 #include <ModuleBase_OperationFeature.h>
67 #include <ModuleBase_WidgetFactory.h>
68 #include <ModuleBase_OperationDescription.h>
69 #include <ModuleBase_ViewerPrs.h>
70 #include <ModuleBase_ResultPrs.h>
72 #include <ModelAPI_ResultField.h>
73 #include <ModelAPI_Object.h>
74 #include <ModelAPI_Events.h>
75 #include <ModelAPI_Validator.h>
76 #include <ModelAPI_Data.h>
77 #include <ModelAPI_Session.h>
78 #include <ModelAPI_ResultBody.h>
79 #include <ModelAPI_AttributeString.h>
80 #include <ModelAPI_AttributeSelectionList.h>
81 #include <ModelAPI_Tools.h>
82 #include <ModelAPI_ResultConstruction.h>
83 #include <ModelAPI_AttributeIntArray.h>
84 #include <ModelAPI_ResultGroup.h>
86 #include <GeomDataAPI_Point2D.h>
87 #include <GeomDataAPI_Point.h>
88 #include <GeomDataAPI_Dir.h>
90 #include <XGUI_ActiveControlMgr.h>
91 #include <XGUI_ActiveControlSelector.h>
92 #include <XGUI_ActionsMgr.h>
93 #include <XGUI_ContextMenuMgr.h>
94 #include <XGUI_DataModel.h>
95 #include <XGUI_Displayer.h>
96 #include <XGUI_ErrorMgr.h>
97 #include <XGUI_FacesPanelSelector.h>
98 #include <XGUI_ModuleConnector.h>
99 #include <XGUI_ObjectsBrowser.h>
100 #include <XGUI_OperationMgr.h>
101 #include <XGUI_PropertyPanel.h>
102 #include <XGUI_SelectionMgr.h>
103 #include <XGUI_Tools.h>
104 #include <XGUI_Workshop.h>
106 #include <SketchPlugin_ConstraintAngle.h>
107 #include <SketchPlugin_ConstraintLength.h>
108 #include <SketchPlugin_ConstraintDistance.h>
109 #include <SketchPlugin_ConstraintParallel.h>
110 #include <SketchPlugin_ConstraintPerpendicular.h>
111 #include <SketchPlugin_ConstraintRadius.h>
112 #include <SketchPlugin_Feature.h>
113 #include <SketchPlugin_Projection.h>
114 #include <SketchPlugin_Sketch.h>
116 #include <SketcherPrs_SymbolPrs.h>
117 #include <SketcherPrs_PositionMgr.h>
118 #include <SketcherPrs_Coincident.h>
119 #include <SketcherPrs_Tools.h>
121 #include <Events_Loop.h>
122 #include <Config_PropManager.h>
123 #include <Config_Keywords.h>
125 #include <AIS_Dimension.hxx>
126 #include <AIS_InteractiveObject.hxx>
127 #include <StdSelect_TypeOfFace.hxx>
128 #include <TopoDS_Vertex.hxx>
129 #include <TopoDS.hxx>
130 #include <TopoDS_Shape.hxx>
131 #include <BRep_Tool.hxx>
134 #include <QMouseEvent>
137 #include <QApplication>
138 #include <QMessageBox>
139 #include <QMainWindow>
143 #include <GeomAlgoAPI_FaceBuilder.h>
144 #include <GeomDataAPI_Dir.h>
146 #include <SelectMgr_ListIteratorOfListOfFilter.hxx>
148 /*!Create and return new instance of XGUI_Module*/
149 extern "C" PARTSET_EXPORT ModuleBase_IModule* createModule(ModuleBase_IWorkshop* theWshop)
151 return new PartSet_Module(theWshop);
154 //******************************************************
155 PartSet_Module::PartSet_Module(ModuleBase_IWorkshop* theWshop)
156 : ModuleBase_IModule(theWshop),
159 myIsOperationIsLaunched(false)
161 new PartSet_IconFactory(this);
163 mySketchMgr = new PartSet_SketcherMgr(this);
164 mySketchReentrantMgr = new PartSet_SketcherReentrantMgr(theWshop);
166 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(theWshop);
167 XGUI_Workshop* aWorkshop = aConnector->workshop();
169 ModuleBase_IViewer* aViewer = theWshop->viewer();
170 connect(aViewer, SIGNAL(keyRelease(ModuleBase_IViewWindow*, QKeyEvent*)),
171 this, SLOT(onKeyRelease(ModuleBase_IViewWindow*, QKeyEvent*)));
172 connect(aViewer, SIGNAL(viewTransformed(int)),
173 SLOT(onViewTransformed(int)));
174 connect(aViewer, SIGNAL(viewCreated(ModuleBase_IViewWindow*)),
175 SLOT(onViewCreated(ModuleBase_IViewWindow*)));
176 myMenuMgr = new PartSet_MenuMgr(this);
177 myCustomPrs = new PartSet_CustomPrs(theWshop);
179 myOverconstraintListener = new PartSet_OverconstraintListener(theWshop);
181 Events_Loop* aLoop = Events_Loop::loop();
182 aLoop->registerListener(this, Events_Loop::eventByName(EVENT_DOCUMENT_CHANGED));
183 aLoop->registerListener(this, Events_Loop::eventByName(EVENT_OBJECT_TO_REDISPLAY));
185 registerSelectionFilter(SF_GlobalFilter, new PartSet_GlobalFilter(myWorkshop));
186 registerSelectionFilter(SF_FilterInfinite, new PartSet_FilterInfinite(myWorkshop));
187 Handle(PartSet_ResultGroupNameFilter) aCRFilter = new PartSet_ResultGroupNameFilter(myWorkshop);
188 std::set<std::string> aCRGroupNames;
189 aCRGroupNames.insert(ModelAPI_ResultConstruction::group());
190 aCRFilter->setGroupNames(aCRGroupNames);
191 registerSelectionFilter(SF_ResultGroupNameFilter, aCRFilter);
193 setDefaultConstraintShown();
195 //Config_PropManager::registerProp("Visualization", "object_default_color", "Object color",
196 // Config_Prop::Color, "225,225,225");
198 Config_PropManager::registerProp("Visualization", "result_body_color", "Result color",
199 Config_Prop::Color, ModelAPI_ResultBody::DEFAULT_COLOR());
201 Config_PropManager::registerProp("Visualization", "result_group_color", "Group color",
202 Config_Prop::Color, ModelAPI_ResultGroup::DEFAULT_COLOR());
204 Config_PropManager::registerProp("Visualization", "result_construction_color",
205 "Construction color",
207 ModelAPI_ResultConstruction::DEFAULT_COLOR());
209 Config_PropManager::registerProp("Visualization", "result_part_color", "Part color",
210 Config_Prop::Color, ModelAPI_ResultPart::DEFAULT_COLOR());
212 Config_PropManager::registerProp("Visualization", "result_field_color", "Field color",
213 Config_Prop::Color, ModelAPI_ResultField::DEFAULT_COLOR());
215 Config_PropManager::registerProp("Visualization", "operation_parameter_color",
216 "Reference shape wireframe color in operation", Config_Prop::Color,
217 PartSet_CustomPrs::OPERATION_PARAMETER_COLOR());
218 Config_PropManager::registerProp("Visualization", "operation_result_color",
219 "Result shape wireframe color in operation", Config_Prop::Color,
220 PartSet_CustomPrs::OPERATION_RESULT_COLOR());
221 Config_PropManager::registerProp("Visualization", "operation_highlight_color",
222 "Multi selector item color in operation", Config_Prop::Color,
223 PartSet_CustomPrs::OPERATION_HIGHLIGHT_COLOR());
224 Config_PropManager::registerProp("Visualization", "operation_remove_feature_color",
225 "Color of removed feature in operation", Config_Prop::Color,
226 PartSet_CustomPrs::OPERATION_REMOVE_FEATURE_COLOR());
227 Config_PropManager::registerProp("Visualization", "sketch_preview_plane",
228 "Color of sketch plane", Config_Prop::Color,
229 PartSet_CustomPrs::OPERATION_SKETCH_PLANE());
231 Config_PropManager::registerProp("Visualization", "hidden_face_transparency",
232 "Hidden faces transparency",
233 Config_Prop::DblSpin,
235 std::ostringstream aStream;
236 aStream << SketcherPrs_Tools::getDefaultArrowSize();
237 Config_PropManager::registerProp("Visualization", "dimension_arrow_size",
238 "Dimension arrow size", Config_Prop::IntSpin, aStream.str());
240 Config_PropManager::registerProp("Visualization", "dimension_font", "Dimension font",
241 Config_Prop::String, "Times-bold");
245 aStream << SketcherPrs_Tools::getDefaultTextHeight();
246 Config_PropManager::registerProp("Visualization", "dimension_value_size",
247 "Dimension value size", Config_Prop::IntSpin, aStream.str());
249 Config_PropManager::registerProp("Visualization", "sketch_dimension_color",
251 Config_Prop::Color, SKETCH_DIMENSION_COLOR);
253 Config_PropManager::registerProp("Shortcuts", "add_parameter_shortcut",
254 "Add parameter in parameters manager dialog",
255 Config_Prop::Shortcut, "Ctrl+A");
257 Config_PropManager::registerProp("Windows", "use_hide_faces_panel",
258 "Use HideFaces panel in operations", Config_Prop::Boolean, "false");
261 //******************************************************
262 PartSet_Module::~PartSet_Module()
265 delete myOverconstraintListener;
269 //******************************************************
270 void PartSet_Module::createFeatures()
272 ModuleBase_IModule::createFeatures();
273 myRoot = new PartSet_RootNode();
274 myRoot->setWorkshop(workshop());
278 //******************************************************
279 void PartSet_Module::storeSelection()
281 // cash is used only to restore selection, so it should be filled in storeSelection and
282 // after applying immediatelly cleared in restoreSelection
283 myCurrentSelection.clear();
284 sketchMgr()->storeSelection(PartSet_SketcherMgr::ST_SelectType, myCurrentSelection);
287 //******************************************************
288 void PartSet_Module::restoreSelection()
290 // cash is used only to restore selection, so it should be filled in storeSelection and
291 // after applying immediatelly cleared in restoreSelection
292 sketchMgr()->restoreSelection(myCurrentSelection);
293 myCurrentSelection.clear();
296 //******************************************************
297 void PartSet_Module::registerValidators()
299 //Registering of validators
300 SessionPtr aMgr = ModelAPI_Session::get();
301 ModelAPI_ValidatorsFactory* aFactory = aMgr->validators();
302 aFactory->registerValidator("PartSet_DistanceSelection", new PartSet_DistanceSelection);
303 aFactory->registerValidator("PartSet_LengthSelection", new PartSet_LengthSelection);
304 aFactory->registerValidator("PartSet_PerpendicularSelection", new PartSet_PerpendicularSelection);
305 aFactory->registerValidator("PartSet_ParallelSelection", new PartSet_ParallelSelection);
306 aFactory->registerValidator("PartSet_RadiusSelection", new PartSet_RadiusSelection);
307 aFactory->registerValidator("PartSet_RigidSelection", new PartSet_RigidSelection);
308 aFactory->registerValidator("PartSet_CoincidentSelection", new PartSet_CoincidentSelection);
309 aFactory->registerValidator("PartSet_HVDirSelection", new PartSet_HVDirSelection);
310 aFactory->registerValidator("PartSet_TangentSelection", new PartSet_TangentSelection);
311 aFactory->registerValidator("PartSet_FilletSelection", new PartSet_FilletSelection);
312 aFactory->registerValidator("PartSet_AngleSelection", new PartSet_AngleSelection);
313 aFactory->registerValidator("PartSet_EqualSelection", new PartSet_EqualSelection);
314 aFactory->registerValidator("PartSet_CollinearSelection", new PartSet_CollinearSelection);
315 aFactory->registerValidator("PartSet_MiddlePointSelection", new PartSet_MiddlePointSelection);
316 aFactory->registerValidator("PartSet_DifferentObjects", new PartSet_DifferentObjectsValidator);
317 aFactory->registerValidator("PartSet_DifferentPoints", new PartSet_DifferentPointsValidator);
318 aFactory->registerValidator("PartSet_CoincidentAttr", new PartSet_CoincidentAttr);
319 aFactory->registerValidator("PartSet_MultyTranslationSelection",
320 new PartSet_MultyTranslationSelection);
321 aFactory->registerValidator("PartSet_SplitSelection", new PartSet_SplitSelection);
322 aFactory->registerValidator("PartSet_ProjectionSelection", new PartSet_ProjectionSelection);
323 aFactory->registerValidator("PartSet_IntersectionSelection", new PartSet_IntersectionSelection);
326 //******************************************************
327 void PartSet_Module::connectToPropertyPanel(ModuleBase_ModelWidget* theWidget,
328 const bool isToConnect)
330 mySketchMgr->connectToPropertyPanel(theWidget, isToConnect);
333 //******************************************************
334 void PartSet_Module::operationCommitted(ModuleBase_Operation* theOperation)
336 if (sketchMgr()->isNestedSketchOperation(theOperation)) {
337 mySketchMgr->commitNestedSketch(theOperation);
339 /// deactivate of overconstraint listener should be performed after Sketch commit (#2176)
340 if (PartSet_SketcherMgr::isSketchOperation(theOperation))
341 overconstraintListener()->setActive(false);
343 /// Restart sketcher operations automatically
344 if (!mySketchReentrantMgr->operationCommitted(theOperation)) {
346 ModuleBase_OperationFeature* aFOperation =
347 dynamic_cast<ModuleBase_OperationFeature*>(theOperation);
348 if (aFOperation && !aFOperation->isEditOperation()) {
349 // the selection is cleared after commit the create operation
350 // in order to do not use the same selected objects in the restarted operation
351 // for common behaviour, the selection is cleared even if the operation is not restarted
352 getWorkshop()->selector()->clearSelection();
357 //******************************************************
358 void PartSet_Module::operationAborted(ModuleBase_Operation* theOperation)
360 /// Restart sketcher operations automatically
361 mySketchReentrantMgr->operationAborted(theOperation);
362 /// deactivate of overconstraint listener should be performed after Sketch abort (#2176)
363 if (PartSet_SketcherMgr::isSketchOperation(theOperation))
364 overconstraintListener()->setActive(false);
367 //******************************************************
368 void PartSet_Module::operationStarted(ModuleBase_Operation* theOperation)
370 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>
373 XGUI_Workshop* aWorkshop = XGUI_Tools::workshop(workshop());
374 XGUI_PropertyPanel* aPropertyPanel = aWorkshop->propertyPanel();
376 ModuleBase_ModelWidget* aFilledWidget = 0;
377 bool aPostonedWidgetActivation = false;
379 FeaturePtr aFeature = aFOperation->feature();
380 /// Restart sketcher operations automatically
381 /// it is important to call method of sketch reentrant manager before filling of PP
382 /// because it fills some created feature attributes, these new values should be used
383 /// to fill the property panel
384 mySketchReentrantMgr->operationStarted(theOperation);
386 aWorkshop->fillPropertyPanel(aFOperation);
387 // filling the operation values by the current selection
388 // if the operation can be committed after the controls filling, the method perform should
389 // be stopped. Otherwise unnecessary presentations can be shown(e.g. operation prs in sketch)
390 bool isOperationCommitted = false;
391 if (!aFOperation->isEditOperation()) {
392 std::string aGreedAttributeId = ModuleBase_Tools::findGreedAttribute(workshop(), aFeature);
393 // if there is a greed attribute, automatic commit by preselection
394 // for this feature is prohibited
395 aFilledWidget = aFOperation->activateByPreselection(aGreedAttributeId);
396 if (currentOperation() != aFOperation)
397 isOperationCommitted = true;
399 if (aGreedAttributeId.empty()) {
400 // a signal should be emitted before the next widget activation
401 // because, the activation of the next widget will give a focus to the widget.
402 // As a result the value of the widget is initialized.
403 // And commit may happens until the value is entered.
405 if (mySketchReentrantMgr->canBeCommittedByPreselection())
406 isOperationCommitted = mySketchMgr->operationActivatedByPreselection();
407 // activate the next obligatory widget
408 if (!isOperationCommitted)
409 aPropertyPanel->activateNextWidget(aFilledWidget);
412 else { // there is a greed widget
413 const QList<ModuleBase_ModelWidget*>& aWidgets = aPropertyPanel->modelWidgets();
414 std::string aFirstAttributeId = aWidgets.front()->attributeID();
415 // activate next widget after greeded if it is the first widget in the panel
416 // else the first panel widget is already activated by operation start
417 if (aFirstAttributeId == aGreedAttributeId)
418 aPostonedWidgetActivation = true;
421 } if (!isOperationCommitted) {
422 aWorkshop->connectToPropertyPanel(true);
423 updateSketcherOnStart(aFOperation);
424 updatePresentationsOnStart(aFOperation);
426 // the objects of the current operation should be deactivated
427 QObjectPtrList anObjects;
428 anObjects.append(aFeature);
429 std::list<ResultPtr> aResults;
430 ModelAPI_Tools::allResults(aFeature, aResults);
431 std::list<ResultPtr>::const_iterator aIt;
432 for (aIt = aResults.begin(); aIt != aResults.end(); ++aIt) {
433 anObjects.append(*aIt);
435 QObjectPtrList::const_iterator anIt = anObjects.begin(), aLast = anObjects.end();
436 for (; anIt != aLast; anIt++)
437 aWorkshop->deactivateActiveObject(*anIt, false);
438 if (anObjects.size() > 0) {
439 XGUI_Displayer* aDisplayer = aWorkshop->displayer();
440 aDisplayer->updateViewer();
442 /// state of command actions should be updated after displayed objects modification because
443 /// deactivation(for example) of objects may influence on selection in the viewer
444 /// State of command actions may depend on selection in the viewer(e.g. Sketch)
445 workshop()->updateCommandStatus();
447 if (aPostonedWidgetActivation) {
448 // if the widget is an empty in the chain of activated widgets, the current operation
449 // is restarted. It should be performed after functionality of the operation starting
450 aPropertyPanel->activateNextWidget(aFilledWidget);
455 //******************************************************
456 void PartSet_Module::updateSketcherOnStart(ModuleBase_Operation* theOperation)
458 if (PartSet_SketcherMgr::isSketchOperation(theOperation)) {
459 mySketchMgr->startSketch(theOperation);
461 // It is switched off because of
462 // Task #3067: 5.2.2 Drawing in the sketcher: change the mouse cursor arrow
463 //else if (sketchMgr()->isNestedSketchOperation(theOperation)) {
464 // mySketchMgr->startNestedSketch(theOperation);
468 //******************************************************
469 void PartSet_Module::updatePresentationsOnStart(ModuleBase_Operation* theOperation)
471 ModuleBase_OperationFeature* aFOperation =
472 dynamic_cast<ModuleBase_OperationFeature*>(theOperation);
474 myCustomPrs->activate(aFOperation->feature(), ModuleBase_IModule::CustomizeArguments, false);
475 myCustomPrs->activate(aFOperation->feature(), ModuleBase_IModule::CustomizeResults, false);
479 //******************************************************
480 void PartSet_Module::operationResumed(ModuleBase_Operation* theOperation)
482 ModuleBase_IModule::operationResumed(theOperation);
484 ModuleBase_OperationFeature* aFOperation =
485 dynamic_cast<ModuleBase_OperationFeature*>(theOperation);
487 myCustomPrs->activate(aFOperation->feature(), ModuleBase_IModule::CustomizeArguments, false);
488 myCustomPrs->activate(aFOperation->feature(), ModuleBase_IModule::CustomizeResults, false);
492 //******************************************************
493 void PartSet_Module::operationStopped(ModuleBase_Operation* theOperation)
495 bool isModifiedArgs = myCustomPrs->deactivate(ModuleBase_IModule::CustomizeArguments, false);
496 bool isModifiedResults = myCustomPrs->deactivate(ModuleBase_IModule::CustomizeResults, false);
497 bool isModified = isModifiedArgs || isModifiedResults;
499 if (sketchMgr()->isNestedSketchOperation(theOperation)) {
500 mySketchMgr->stopNestedSketch(theOperation);
502 else if (PartSet_SketcherMgr::isSketchOperation(theOperation))
503 setDefaultConstraintShown();
505 //VSV: Viewer is updated on feature update and redisplay
507 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(myWorkshop);
508 XGUI_Displayer* aDisplayer = aConnector->workshop()->displayer();
509 aDisplayer->updateViewer();
512 QMap<PartSet_Tools::ConstraintVisibleState, bool>::const_iterator
513 anIt = myHasConstraintShown.begin(), aLast = myHasConstraintShown.end();
514 for (; anIt != aLast; anIt++) {
515 mySketchMgr->updateBySketchParameters(anIt.key(), anIt.value());
519 //******************************************************
520 ModuleBase_Operation* PartSet_Module::currentOperation() const
522 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
523 XGUI_OperationMgr* anOpMgr = aConnector->workshop()->operationMgr();
524 return anOpMgr->currentOperation();
527 //******************************************************
528 bool PartSet_Module::canUndo() const
530 bool aCanUndo = false;
531 SessionPtr aMgr = ModelAPI_Session::get();
532 if (aMgr->hasModuleDocument() && aMgr->canUndo()) {
533 aCanUndo = !aMgr->isOperation();
534 if (!aCanUndo) // check the enable state additionally by sketch manager
535 aCanUndo = aMgr->canUndo();
540 //******************************************************
541 bool PartSet_Module::canRedo() const
543 bool aCanRedo = false;
544 SessionPtr aMgr = ModelAPI_Session::get();
545 if (aMgr->hasModuleDocument() && aMgr->canRedo()) {
546 aCanRedo = !aMgr->isOperation();
547 if (!aCanRedo) // check the enable state additionally by sketch manager
548 aCanRedo = aMgr->canRedo();
553 //******************************************************
554 bool PartSet_Module::canApplyAction(const ObjectPtr& theObject, const QString& theActionId) const
557 if (theActionId == "MOVE_CMD" || theActionId == "MOVE_SPLIT_CMD") {
558 FeaturePtr aFeature = ModelAPI_Feature::feature(theObject);
560 ResultPtr aResult = ModuleBase_Tools::firstResult(aFeature);
561 // part features can not be moved in the history.
562 if (aResult.get() && aResult->groupName() == ModelAPI_ResultPart::group())
569 //******************************************************
570 bool PartSet_Module::canEraseObject(const ObjectPtr& theObject) const
572 // the sketch manager put the restriction to the objects erase
573 return mySketchMgr->canEraseObject(theObject);
576 //******************************************************
577 bool PartSet_Module::canDisplayObject(const ObjectPtr& theObject) const
579 // the sketch manager put the restriction to the objects display
580 return mySketchMgr->canDisplayObject(theObject);
583 //******************************************************
584 bool PartSet_Module::canUsePreselection(const QString& thePreviousOperationKind,
585 const QString& theStartedOperationKind)
587 if (ModuleBase_IModule::canUsePreselection(thePreviousOperationKind, theStartedOperationKind))
590 return mySketchMgr->isNestedSketchFeature(theStartedOperationKind);
593 /*void PartSet_Module::processHiddenObject(const std::list<ObjectPtr>& theObjects)
595 mySketchMgr->processHiddenObject(theObjects);
598 //******************************************************
599 bool PartSet_Module::canActivateSelection(const ObjectPtr& theObject) const
601 bool aCanActivate = ModuleBase_IModule::canActivateSelection(theObject);
603 ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
604 bool isSketchOp = PartSet_SketcherMgr::isSketchOperation(anOperation),
605 isNestedOp = sketchMgr()->isNestedSketchOperation(anOperation);
606 if (isSketchOp || isNestedOp) {
607 // in active sketch operation it is possible to activate operation object in selection
608 // in the edit operation, e.g. points of the line can be moved when the line is edited
609 ModuleBase_OperationFeature* aFOperation =
610 dynamic_cast<ModuleBase_OperationFeature*>(anOperation);
611 aCanActivate = aCanActivate || (aFOperation && aFOperation->isEditOperation());
616 //******************************************************
617 bool PartSet_Module::addViewerMenu(const QMap<QString, QAction*>& theStdActions,
619 QMap<int, QAction*>& theMenuActions) const
621 return myMenuMgr->addViewerMenu(theStdActions, theParent, theMenuActions);
624 //******************************************************
625 void PartSet_Module::updateViewerMenu(const QMap<QString, QAction*>& theStdActions)
627 myMenuMgr->updateViewerMenu(theStdActions);
630 //******************************************************
631 bool PartSet_Module::isActionEnableStateFixed(const int theActionId) const
633 bool isEnabledFixed = false;
634 if (theActionId == XGUI_ActionsMgr::AcceptAll &&
635 mySketchReentrantMgr->isInternalEditActive())
636 isEnabledFixed = true;
637 return isEnabledFixed;
640 //******************************************************
641 QString PartSet_Module::getFeatureError(const FeaturePtr& theFeature)
643 QString anError = ModuleBase_IModule::getFeatureError(theFeature);
644 if (anError.isEmpty())
645 anError = sketchMgr()->getFeatureError(theFeature);
650 //******************************************************
651 void PartSet_Module::grantedOperationIds(ModuleBase_Operation* theOperation,
652 QStringList& theIds) const
654 myMenuMgr->grantedOperationIds(theOperation, theIds);
656 if (PartSet_SketcherMgr::isSketchOperation(theOperation)) {
657 XGUI_Workshop* aWorkshop = getWorkshop();
658 theIds.append(aWorkshop->contextMenuMgr()->action("DELETE_CMD")->text());
662 //******************************************************
663 void PartSet_Module::activeSelectionModes(QIntList& theModes)
665 if (mySketchMgr->activeSketch().get())
666 PartSet_SketcherMgr::sketchSelectionModes(mySketchMgr->activeSketch(), theModes);
668 theModes = XGUI_Tools::workshop(myWorkshop)->viewerSelectionModes();
671 //******************************************************
672 void PartSet_Module::moduleSelectionModes(int theModesType, QIntList& theModes)
674 customSubShapesSelectionModes(theModes);
675 //theModes.append(XGUI_Tools::workshop(myWorkshop)->viewerSelectionModes());
676 //myWorkshop->module()->activeSelectionModes(theModes);
679 //******************************************************
680 void PartSet_Module::moduleSelectionFilters(const QIntList& theFilterTypes,
681 SelectMgr_ListOfFilter& theSelectionFilters)
683 bool isSketchActive = mySketchMgr->activeSketch().get();
685 std::map<ModuleBase_SelectionFilterType, Handle(SelectMgr_Filter)>::const_iterator aFiltersIt =
686 mySelectionFilters.begin();
687 for (; aFiltersIt != mySelectionFilters.end(); aFiltersIt++) {
688 int aFilterType = aFiltersIt->first;
689 // do not add not participating filters in given parameters
690 if (!theFilterTypes.contains(aFilterType))
693 // using sketch filters only if sketch operation is active
694 if (!isSketchActive &&
695 mySketchMgr->sketchSelectionFilter((ModuleBase_SelectionFilterType)aFilterType))
698 // using filtering of construction results only from faces panel
699 if (aFilterType == SF_ResultGroupNameFilter)
702 theSelectionFilters.Append(aFiltersIt->second);
706 //******************************************************
707 void PartSet_Module::customSubShapesSelectionModes(QIntList& theModes)
709 if (theModes.contains(TopAbs_FACE))
710 theModes.append(SketcherPrs_Tools::Sel_Sketch_Face);
711 if (theModes.contains(TopAbs_WIRE))
712 theModes.append(SketcherPrs_Tools::Sel_Sketch_Wire);
714 if (mySketchMgr->activeSketch().get())
715 PartSet_SketcherMgr::sketchSelectionModes(mySketchMgr->activeSketch(), theModes);
718 //******************************************************
719 void PartSet_Module::getGeomSelection(const std::shared_ptr<ModuleBase_ViewerPrs>& theSelected,
720 ObjectPtr& theObject, AttributePtr& theAttribute)
722 ObjectPtr anObject = theSelected->object();
723 GeomShapePtr aShape = theSelected->shape();
725 theAttribute = findAttribute(anObject, aShape);
726 // TODO: try to create result if object is an external object
727 theObject = anObject;
730 //******************************************************
731 bool PartSet_Module::isMouseOverWindow()
733 return mySketchMgr->isMouseOverWindow();
736 //******************************************************
737 bool PartSet_Module::isSketchNeutralPointActivated() const
739 bool isNeutralPoint = true;
740 if (sketchReentranceMgr()->isInternalEditActive())
741 isNeutralPoint = false;
742 if (myIsOperationIsLaunched)
743 isNeutralPoint = false;
745 return isNeutralPoint;
748 //******************************************************
749 void PartSet_Module::closeDocument()
751 myActivePartIndex = QModelIndex();
752 SketcherPrs_PositionMgr::get()->clearAll();
755 //******************************************************
756 void PartSet_Module::clearViewer()
758 myCustomPrs->clearPrs();
760 XGUI_Workshop* aWorkshop = getWorkshop();
761 XGUI_Displayer* aDisplayer = aWorkshop->displayer();
762 aDisplayer->deactivateSelectionFilters(false);
765 //******************************************************
766 void PartSet_Module::propertyPanelDefined(ModuleBase_Operation* theOperation)
768 ModuleBase_OperationFeature* aFOperation =
769 dynamic_cast<ModuleBase_OperationFeature*>(theOperation);
773 ModuleBase_IPropertyPanel* aPanel = aFOperation->propertyPanel();
774 // we have to manually activate the sketch label in edit mode
775 if (PartSet_SketcherMgr::isSketchOperation(aFOperation) && (aFOperation->isEditOperation()))
776 aPanel->activateWidget(aPanel->modelWidgets().first());
779 //******************************************************
780 bool PartSet_Module::createWidgets(const FeaturePtr& theFeature, const QString& theXmlRepr,
781 QList<ModuleBase_ModelWidget*>& theWidgets) const
783 bool aProcessed = false;
785 XGUI_Workshop* aWorkshop = getWorkshop();
786 XGUI_PropertyPanel* aPropertyPanel = aWorkshop->propertyPanel();
787 if (mySketchMgr->activeSketch().get() && aPropertyPanel) {
788 ModuleBase_ISelection* aSelection = workshop()->selection();
789 // click on a point in sketch leads here with the point is highlighted, not yet selected
790 QList<ModuleBase_ViewerPrsPtr> aPreselection = aSelection->getHighlighted();
791 if (aPreselection.size() == 1) {
792 ModuleBase_ViewerPrsPtr aSelectedPrs = aPreselection[0];
793 ObjectPtr anObject = aSelectedPrs->object();
795 FeaturePtr aFeature = ModelAPI_Feature::feature(anObject);
796 GeomShapePtr aShape = aSelectedPrs->shape();
797 // click on the digit of dimension constrain comes here
798 // with an empty shape, so we need the check
799 if (aFeature == theFeature && aShape.get() && !aShape->isNull()) {
800 // if feature has only one result and shape of result is equal to selected shape
801 // this attribute is not processed. It is a case of Sketch Point.
802 if (aFeature->results().size() == 1) {
803 ResultPtr aResult = aFeature->results().front();
804 if (aResult.get() && aResult->shape()->isEqual(aShape))
807 const TopoDS_Shape& aTDShape = aShape->impl<TopoDS_Shape>();
808 std::pair<AttributePtr, int> anAttribute =
809 PartSet_Tools::findAttributeBy2dPoint(anObject, aTDShape, mySketchMgr->activeSketch());
810 if (anAttribute.first.get()) {
811 ModuleBase_WidgetFactory aFactory(theXmlRepr.toStdString(), workshop());
813 const std::string anAttributeId = anAttribute.first->id();
814 aFactory.createWidget(aPropertyPanel->contentWidget(), anAttributeId);
816 theWidgets = aFactory.getModelWidgets();
817 // it is possible that the point does not present in XML definition,
818 // in this case, we assume that it is not processed by this module
819 // e.g. "Intersection point" feature
820 aProcessed = !theWidgets.isEmpty();
828 //******************************************************
829 void PartSet_Module::onSelectionChanged()
831 ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
835 bool isSketcherOp = false;
836 // An edit operation is enable only if the current opeation is the sketch operation
837 if (mySketchMgr->activeSketch()) {
838 if (PartSet_Tools::sketchPlane(mySketchMgr->activeSketch()))
839 isSketcherOp = PartSet_SketcherMgr::isSketchOperation(aOperation);
842 // Editing of constraints can be done on selection
843 ModuleBase_ISelection* aSelect = myWorkshop->selection();
844 QList<ModuleBase_ViewerPrsPtr> aSelected = aSelect->getSelected();
845 if (aSelected.size() == 1) {
846 ModuleBase_ViewerPrsPtr aPrs = aSelected.first();
847 ObjectPtr aObject = aPrs->object();
848 FeaturePtr aFeature = ModelAPI_Feature::feature(aObject);
850 std::string aId = aFeature->getKind();
851 if ((aId == SketchPlugin_ConstraintRadius::ID()) ||
852 (aId == SketchPlugin_ConstraintLength::ID()) ||
853 (aId == SketchPlugin_ConstraintDistance::ID()) ||
854 (aId == SketchPlugin_ConstraintAngle::ID())) {
855 editFeature(aFeature);
862 //******************************************************
863 void PartSet_Module::onKeyRelease(ModuleBase_IViewWindow* theWnd, QKeyEvent* theEvent)
865 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
866 XGUI_OperationMgr* anOpMgr = aConnector->workshop()->operationMgr();
867 anOpMgr->onKeyReleased(theWnd->viewPort(), theEvent);
870 //******************************************************
871 ModuleBase_ModelWidget* PartSet_Module::createWidgetByType(const std::string& theType,
873 Config_WidgetAPI* theWidgetApi)
875 ModuleBase_IWorkshop* aWorkshop = workshop();
876 XGUI_Workshop* aXUIWorkshop = getWorkshop();
877 ModuleBase_ModelWidget* aWgt = NULL;
878 if (theType == "sketch-start-label") {
879 PartSet_WidgetSketchLabel* aLabelWgt = new PartSet_WidgetSketchLabel(theParent, aWorkshop,
880 theWidgetApi, myHasConstraintShown);
881 connect(aLabelWgt, SIGNAL(planeSelected(const std::shared_ptr<GeomAPI_Pln>&)),
882 mySketchMgr, SLOT(onPlaneSelected(const std::shared_ptr<GeomAPI_Pln>&)));
883 connect(aLabelWgt, SIGNAL(showConstraintToggled(int, bool)),
884 mySketchMgr, SLOT(onShowConstraintsToggle(int, bool)));
885 connect(aLabelWgt, SIGNAL(showFreePoints(bool)), mySketchMgr, SLOT(onShowPoints(bool)));
886 connect(aLabelWgt, SIGNAL(autoConstraints(bool)),
887 sketchReentranceMgr(), SLOT(onAutoConstraints(bool)));
888 aLabelWgt->setShowPointsState(mySketchMgr->isShowFreePointsShown());
890 } else if (theType == "sketch-2dpoint_selector") {
891 PartSet_WidgetPoint2D* aPointWgt = new PartSet_WidgetPoint2D(theParent, aWorkshop,
893 aPointWgt->setSketch(mySketchMgr->activeSketch());
894 connect(aPointWgt, SIGNAL(vertexSelected()), sketchReentranceMgr(), SLOT(onVertexSelected()));
896 }else if (theType == "sketch-2dpoint_flyout_selector") {
897 PartSet_WidgetPoint2DFlyout* aPointWgt = new PartSet_WidgetPoint2DFlyout(theParent, aWorkshop,
899 aPointWgt->setSketch(mySketchMgr->activeSketch());
900 connect(aPointWgt, SIGNAL(vertexSelected()), sketchReentranceMgr(), SLOT(onVertexSelected()));
902 } else if (theType == "sketch_shape_selector") {
903 PartSet_WidgetShapeSelector* aShapeSelectorWgt =
904 new PartSet_WidgetShapeSelector(theParent, aWorkshop, theWidgetApi);
905 aShapeSelectorWgt->setSketcher(mySketchMgr->activeSketch());
906 aWgt = aShapeSelectorWgt;
907 } else if (theType == "sketch_multi_selector") {
908 PartSet_WidgetMultiSelector* aShapeSelectorWgt =
909 new PartSet_WidgetMultiSelector(theParent, aWorkshop, theWidgetApi);
910 aShapeSelectorWgt->setSketcher(mySketchMgr->activeSketch());
911 aWgt = aShapeSelectorWgt;
913 else if (theType == "sketch_feature_point_selector") {
914 PartSet_WidgetFeaturePointSelector* aPointSelectorWgt =
915 new PartSet_WidgetFeaturePointSelector(theParent, aWorkshop, theWidgetApi);
916 aPointSelectorWgt->setSketcher(mySketchMgr->activeSketch());
917 aWgt = aPointSelectorWgt;
919 else if (theType == "sketch-bspline_selector") {
920 PartSet_WidgetBSplinePoints* aBSplineWgt =
921 new PartSet_WidgetBSplinePoints(theParent, aWorkshop, theWidgetApi);
922 aBSplineWgt->setSketch(mySketchMgr->activeSketch());
925 else if (theType == WDG_DOUBLEVALUE_EDITOR) {
926 aWgt = new PartSet_WidgetEditor(theParent, aWorkshop, theWidgetApi);
927 } else if (theType == "export_file_selector") {
928 aWgt = new PartSet_WidgetFileSelector(theParent, aWorkshop, theWidgetApi);
929 } else if (theType == "sketch_launcher") {
930 aWgt = new PartSet_WidgetSketchCreator(theParent, this, theWidgetApi);
931 } else if (theType == "module_choice") {
932 aWgt = new ModuleBase_WidgetChoice(theParent, theWidgetApi);
933 connect(aWgt, SIGNAL(itemSelected(ModuleBase_ModelWidget*, int)),
934 this, SLOT(onChoiceChanged(ModuleBase_ModelWidget*, int)));
939 //******************************************************
940 ModuleBase_ModelWidget* PartSet_Module::activeWidget() const
942 ModuleBase_ModelWidget* anActiveWidget = 0;
944 ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
946 return anActiveWidget;
948 ModuleBase_IPropertyPanel* aPanel = aOperation->propertyPanel();
950 return anActiveWidget;
952 return aPanel->activeWidget(true);
955 //******************************************************
956 bool PartSet_Module::deleteObjects()
958 bool isProcessed = false;
960 XGUI_Workshop* aWorkshop = getWorkshop();
961 XGUI_OperationMgr* anOpMgr = aWorkshop->operationMgr();
963 //SessionPtr aMgr = ModelAPI_Session::get();
964 // 1. check whether the delete should be processed in the module
965 ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
966 bool isSketchOp = PartSet_SketcherMgr::isSketchOperation(anOperation),
967 isNestedOp = sketchMgr()->isNestedSketchOperation(anOperation);
968 if (isSketchOp || isNestedOp) {
970 // 2. find selected presentations
971 // selected objects should be collected before the current operation abort because
972 // the abort leads to selection lost on constraint objects. It can be corrected after #386 issue
973 ModuleBase_ISelection* aSel = workshop()->selection();
974 QObjectPtrList aSelectedObj = aSel->selectedPresentations();
975 // if there are no selected objects in the viewer, that means that the selection in another
976 // place cased this method. It is necessary to return the false value to understande in above
977 // method that delete is not processed
978 if (aSelectedObj.count() == 0)
981 // avoid delete of the objects, which are not belong to the current sketch
982 // in order to do not delete results of other sketches
983 QObjectPtrList aSketchObjects;
984 QObjectPtrList::const_iterator anIt = aSelectedObj.begin(), aLast = aSelectedObj.end();
985 for ( ; anIt != aLast; anIt++) {
986 ObjectPtr anObject = *anIt;
987 if (mySketchMgr->isObjectOfSketch(anObject)) {
988 // sketch feature should be used in this list because workshop deletes features only
989 // results are skipped
990 FeaturePtr aSketchFeature = ModelAPI_Feature::feature(anObject);
991 aSketchObjects.append(aSketchFeature);
994 // if the selection contains only local selected presentations from other sketches,
995 // the Delete operation should not be done at all
996 if (aSketchObjects.size() == 0)
999 // 3. start operation
1000 QString aDescription = aWorkshop->contextMenuMgr()->action("DELETE_CMD")->text();
1001 ModuleBase_Operation* anOpAction = new ModuleBase_Operation(aDescription, this);
1003 // the active nested sketch operation should be aborted unconditionally
1004 // the Delete action should be additionally granted for the Sketch operation
1005 // in order to do not abort/commit it
1007 if (!anOpMgr->canStartOperation(anOpAction->id(), isCommitted))
1008 return true; // the objects are processed but can not be deleted
1010 anOpMgr->startOperation(anOpAction);
1012 // WORKAROUND, should be done to avoid viewer highlight update after deletetion of objects
1013 // the problem is in AIS Dimensions recompute
1014 // if a line and the dim are removed, line is the first
1015 // it causes the AIS recompute, where the base line is null,
1016 // the result is empty AIS in the viewer
1017 XGUI_Tools::workshop(myWorkshop)->selector()->clearSelection();
1019 // 4. delete features
1020 // sketch feature should be skipped, only sub-features can be removed
1021 // when sketch operation is active
1022 aWorkshop->deleteFeatures(aSketchObjects);
1023 // 5. stop operation
1024 anOpMgr->commitOperation();
1029 //******************************************************
1030 void PartSet_Module::editFeature(FeaturePtr theFeature)
1032 storeConstraintsState(theFeature->getKind());
1033 ModuleBase_IModule::editFeature(theFeature);
1036 //******************************************************
1037 bool PartSet_Module::canCommitOperation() const
1042 //******************************************************
1043 void PartSet_Module::launchOperation(const QString& theCmdId, const bool& isStartAfterCommitOnly)
1045 myIsOperationIsLaunched = true;
1046 storeConstraintsState(theCmdId.toStdString());
1047 updateConstraintsState(theCmdId.toStdString());
1049 ModuleBase_IModule::launchOperation(theCmdId, isStartAfterCommitOnly);
1051 myIsOperationIsLaunched = false;
1054 //******************************************************
1055 void PartSet_Module::storeConstraintsState(const std::string& theFeatureKind)
1057 if (myWorkshop->currentOperation() &&
1058 myWorkshop->currentOperation()->id().toStdString() == SketchPlugin_Sketch::ID()) {
1059 const QMap<PartSet_Tools::ConstraintVisibleState, bool>& aShownStates =
1060 mySketchMgr->showConstraintStates();
1061 myHasConstraintShown = aShownStates;
1065 //******************************************************
1066 void PartSet_Module::updateConstraintsState(const std::string& theFeatureKind)
1068 if (PartSet_SketcherMgr::constraintsIdList().contains(theFeatureKind.c_str()) ||
1069 PartSet_SketcherMgr::replicationsIdList().contains(theFeatureKind.c_str())) {
1070 // Show constraints if a constraint was anOperation
1071 mySketchMgr->updateBySketchParameters(PartSet_Tools::Geometrical, true);
1072 mySketchMgr->updateBySketchParameters(PartSet_Tools::Dimensional, true);
1073 mySketchMgr->updateBySketchParameters(PartSet_Tools::Expressions,
1074 myHasConstraintShown[PartSet_Tools::Expressions]);
1078 //******************************************************
1079 void PartSet_Module::onObjectDisplayed(ObjectPtr theObject, AISObjectPtr theAIS)
1081 Handle(AIS_InteractiveObject) anAIS = theAIS->impl<Handle(AIS_InteractiveObject)>();
1082 if (!anAIS.IsNull()) {
1083 FeaturePtr aFeature = ModelAPI_Feature::feature(theObject);
1084 if (aFeature.get()) {
1085 bool aToUseZLayer = false;
1086 if (PartSet_Tools::findRefsToMeFeature(aFeature,SketchPlugin_Projection::ID()))
1087 aToUseZLayer = true;
1089 CompositeFeaturePtr aParent = ModelAPI_Tools::compositeOwner(aFeature);
1090 aToUseZLayer = (aParent.get() && (aParent->getKind() == SketchPlugin_Sketch::ID()));
1093 Handle(AIS_InteractiveContext) aCtx = anAIS->GetContext();
1094 if (aFeature->getKind() == SketchPlugin_ConstraintCoincidence::ID())
1095 aCtx->SetZLayer(anAIS, Graphic3d_ZLayerId_Top);
1097 aCtx->SetZLayer(anAIS, myVisualLayerId);
1103 //******************************************************
1104 void PartSet_Module::onBeforeObjectErase(ObjectPtr theObject, AISObjectPtr theAIS)
1107 // it should be recomputed in order to disappear in the viewer if the corresponded object
1109 //if (myCustomPrs->isActive())
1110 // myCustomPrs->redisplay(theObject, false);
1113 //******************************************************
1114 void PartSet_Module::onViewTransformed(int theTrsfType)
1116 // Set length of arrows constant in pixel size
1117 // if the operation is panning or rotate or panglobal then do nothing
1118 if ((theTrsfType == 1) || (theTrsfType == 3) || (theTrsfType == 4))
1120 ModuleBase_IViewer* aViewer = myWorkshop->viewer();
1121 Handle(AIS_InteractiveContext) aContext = aViewer->AISContext();
1122 if (aContext.IsNull())
1125 //Handle(V3d_View) aView = aViewer->activeView();
1127 XGUI_Workshop* aWorkshop = getWorkshop();
1128 XGUI_Displayer* aDisplayer = aWorkshop->displayer();
1129 Handle(V3d_Viewer) aV3dViewer = aContext->CurrentViewer();
1130 Handle(V3d_View) aView;
1132 for (aV3dViewer->InitDefinedViews();
1133 aV3dViewer->MoreDefinedViews();
1134 aV3dViewer->NextDefinedViews()) {
1135 Handle(V3d_View) aV = aV3dViewer->DefinedView();
1136 double aS = aV->Scale();
1145 bool isModified = false;
1146 ModuleBase_Operation* aCurrentOperation = myWorkshop->currentOperation();
1147 if (aCurrentOperation &&
1148 (PartSet_SketcherMgr::isSketchOperation(aCurrentOperation) ||
1149 sketchMgr()->isNestedSketchOperation(aCurrentOperation) ||
1150 (aCurrentOperation->id() == "Measurement")))
1152 double aLen = aView->Convert(SketcherPrs_Tools::getConfigArrowSize());
1154 double aPrevLen = SketcherPrs_Tools::getArrowSize();
1155 SketcherPrs_Tools::setArrowSize(aLen);
1156 const double aCurScale = aViewer->activeView()->Camera()->Scale();
1157 aViewer->SetScale(aViewer->activeView(), aCurScale);
1159 QList<Handle(AIS_InteractiveObject)> aPrsList = aDisplayer->displayedPresentations();
1160 foreach(Handle(AIS_InteractiveObject) aAisObj, aPrsList) {
1162 QList<AISObjectPtr> aPrsList = aDisplayer->displayedPresentations();
1163 foreach(AISObjectPtr aAIS, aPrsList) {
1164 Handle(AIS_InteractiveObject) aAisObj = aAIS->impl<Handle(AIS_InteractiveObject)>();
1166 Handle(AIS_Dimension) aDim = Handle(AIS_Dimension)::DownCast(aAisObj);
1167 if (!aDim.IsNull()) {
1168 aDim->DimensionAspect()->ArrowAspect()->SetLength(aLen);
1169 aContext->Redisplay(aDim, false);
1174 aDisplayer->updateViewer();
1179 //******************************************************
1180 bool PartSet_Module::isCustomPrsActivated(const ModuleBase_CustomizeFlag& theFlag) const
1182 return myCustomPrs->isActive(theFlag);
1185 //******************************************************
1186 void PartSet_Module::activateCustomPrs(const FeaturePtr& theFeature,
1187 const ModuleBase_CustomizeFlag& theFlag,
1188 const bool theUpdateViewer)
1190 myCustomPrs->activate(theFeature, theFlag, theUpdateViewer);
1193 //******************************************************
1194 void PartSet_Module::deactivateCustomPrs(const ModuleBase_CustomizeFlag& theFlag,
1195 const bool theUpdateViewer)
1197 myCustomPrs->deactivate(theFlag, theUpdateViewer);
1200 //******************************************************
1201 //bool PartSet_Module::customisePresentation(ResultPtr theResult, AISObjectPtr thePrs,
1202 // std::shared_ptr<GeomAPI_ICustomPrs> theCustomPrs)
1204 // bool aCustomized = false;
1206 // XGUI_Workshop* aWorkshop = getWorkshop();
1207 // XGUI_Displayer* aDisplayer = aWorkshop->displayer();
1208 // ObjectPtr anObject = aDisplayer->getObject(thePrs);
1210 // return aCustomized;
1212 // if (!theResult.get()) {
1213 // std::vector<int> aColor;
1214 // XGUI_CustomPrs::getDefaultColor(anObject, true, aColor);
1215 // if (!aColor.empty()) {
1216 // aCustomized = thePrs->setColor(aColor[0], aColor[1], aColor[2]);
1219 // // customize dimentional constrains
1220 // sketchMgr()->customisePresentation(anObject);
1222 // return aCustomized;
1225 ////******************************************************
1226 //bool PartSet_Module::afterCustomisePresentation(std::shared_ptr<ModelAPI_Result> theResult,
1227 // AISObjectPtr thePrs,
1228 // GeomCustomPrsPtr theCustomPrs)
1230 // bool aCustomized = false;
1232 // XGUI_Workshop* aWorkshop = getWorkshop();
1233 // XGUI_Displayer* aDisplayer = aWorkshop->displayer();
1234 // ObjectPtr anObject = aDisplayer->getObject(thePrs);
1236 // return aCustomized;
1238 // std::vector<int> aColor;
1239 // bool aUseCustomColor = true;
1240 // if (aUseCustomColor)
1241 // myOverconstraintListener->getCustomColor(anObject, aColor);
1242 // // customize sketch symbol presentation
1243 // Handle(AIS_InteractiveObject) anAISIO = thePrs->impl<Handle(AIS_InteractiveObject)>();
1244 // if (!anAISIO.IsNull()) {
1245 // if (!Handle(SketcherPrs_SymbolPrs)::DownCast(anAISIO).IsNull()) {
1246 // Handle(SketcherPrs_SymbolPrs) aPrs = Handle(SketcherPrs_SymbolPrs)::DownCast(anAISIO);
1247 // if (!aPrs.IsNull()) {
1248 // aPrs->SetCustomColor(aColor);
1249 // aCustomized = true;
1251 // } else if (!Handle(SketcherPrs_Coincident)::DownCast(anAISIO).IsNull()) {
1252 // Handle(SketcherPrs_Coincident) aPrs = Handle(SketcherPrs_Coincident)::DownCast(anAISIO);
1253 // if (!aPrs.IsNull()) {
1254 // aPrs->SetCustomColor(aColor);
1255 // aCustomized = true;
1259 // // customize sketch dimension constraint presentation
1260 // if (!aCustomized) {
1261 // if (!aColor.empty()) { // otherwise presentation has the default color
1262 // aCustomized = thePrs->setColor(aColor[0], aColor[1], aColor[2]);
1265 // return aCustomized;
1268 //******************************************************
1269 bool PartSet_Module::customizeFeature(ObjectPtr theObject, const ModuleBase_CustomizeFlag& theFlag,
1270 const bool theUpdateViewer)
1272 bool isRedisplayed = false;
1273 if (myCustomPrs->isActive(theFlag))
1274 isRedisplayed = myCustomPrs->redisplay(theObject, theFlag, theUpdateViewer);
1276 return isRedisplayed;
1279 //******************************************************
1280 void PartSet_Module::customizeObjectBrowser(QWidget* theObjectBrowser)
1282 XGUI_ObjectsBrowser* aOB = dynamic_cast<XGUI_ObjectsBrowser*>(theObjectBrowser);
1284 QLabel* aLabel = aOB->activeDocLabel();
1285 aLabel->installEventFilter(myMenuMgr);
1286 connect(aLabel, SIGNAL(customContextMenuRequested(const QPoint&)),
1287 SLOT(onActiveDocPopup(const QPoint&)));
1288 aOB->treeView()->setExpandsOnDoubleClick(false);
1289 connect(aOB->treeView(), SIGNAL(doubleClicked(const QModelIndex&)),
1290 SLOT(onTreeViewDoubleClick(const QModelIndex&)));
1292 Events_Loop* aLoop = Events_Loop::loop();
1293 aLoop->registerListener(this, Events_Loop::eventByName(EVENT_OBJECT_CREATED));
1297 //******************************************************
1298 void PartSet_Module::onActiveDocPopup(const QPoint& thePnt)
1300 SessionPtr aMgr = ModelAPI_Session::get();
1301 QAction* aActivatePartAction = myMenuMgr->action("ACTIVATE_PARTSET_CMD");
1303 XGUI_Workshop* aWorkshop = getWorkshop();
1304 QLabel* aHeader = aWorkshop->objectBrowser()->activeDocLabel();
1306 aActivatePartAction->setEnabled((aMgr->activeDocument() != aMgr->moduleDocument()));
1309 aMenu.addAction(aActivatePartAction);
1310 aMenu.exec(aHeader->mapToGlobal(thePnt));
1313 //******************************************************
1314 AISObjectPtr PartSet_Module::createPresentation(const ObjectPtr& theObject)
1316 Handle(AIS_InteractiveObject) anAISPrs = mySketchMgr->createPresentation(theObject);
1317 if (anAISPrs.IsNull()) {
1318 ResultPtr aResult = std::dynamic_pointer_cast<ModelAPI_Result>(theObject);
1319 if (aResult.get()) {
1320 std::shared_ptr<GeomAPI_Shape> aShapePtr = ModelAPI_Tools::shape(aResult);
1321 if (aShapePtr.get() != NULL)
1322 anAISPrs = new ModuleBase_ResultPrs(aResult);
1325 FieldStepPtr aStep =
1326 std::dynamic_pointer_cast<ModelAPI_ResultField::ModelAPI_FieldStep>(theObject);
1328 anAISPrs = new PartSet_FieldStepPrs(aStep);
1333 if (!anAISPrs.IsNull()) {
1334 Handle(AIS_Shape) aShapePrs = Handle(AIS_Shape)::DownCast(anAISPrs);
1335 if (!aShapePrs.IsNull())
1336 ModuleBase_Tools::setPointBallHighlighting((AIS_Shape*)aShapePrs.get());
1338 anAIS = AISObjectPtr(new GeomAPI_AISObject());
1339 anAIS->setImpl(new Handle(AIS_InteractiveObject)(anAISPrs));
1340 customizePresentation(theObject, anAIS);
1345 //******************************************************
1346 void getResultColor(const ResultPtr& theResult, std::vector<int>& theColor)
1348 ModelAPI_Tools::getColor(theResult, theColor);
1349 if (theColor.empty())
1350 PartSet_Tools::getDefaultColor(theResult, false, theColor);
1353 //******************************************************
1354 double getResultDeflection(const ResultPtr& theResult)
1356 double aDeflection = ModelAPI_Tools::getDeflection(theResult);
1357 if (aDeflection < 0)
1358 aDeflection = PartSet_Tools::getDefaultDeflection(theResult);
1362 //******************************************************
1363 double getResultTransparency(const ResultPtr& theResult)
1365 double aTransparency = ModelAPI_Tools::getTransparency(theResult);
1366 if (aTransparency < 0)
1367 aTransparency = PartSet_Tools::getDefaultTransparency();
1368 return aTransparency;
1372 //******************************************************
1373 void PartSet_Module::customizePresentation(const ObjectPtr& theObject,
1374 const AISObjectPtr& thePrs) const
1376 if (mySketchMgr->isObjectOfSketch(theObject)) {
1377 mySketchMgr->customizeSketchPresentation(theObject, thePrs);
1380 ResultPtr aResult = std::dynamic_pointer_cast<ModelAPI_Result>(theObject);
1381 if (aResult.get()) {
1382 std::vector<int> aColor;
1383 getResultColor(aResult, aColor);
1385 SessionPtr aMgr = ModelAPI_Session::get();
1386 if (aMgr->activeDocument() != aResult->document()) {
1387 QColor aQColor(aColor[0], aColor[1], aColor[2]);
1389 QColor::fromHsvF(aQColor.hueF(), aQColor.saturationF() / 3., aQColor.valueF());
1390 aColor[0] = aNewColor.red();
1391 aColor[1] = aNewColor.green();
1392 aColor[2] = aNewColor.blue();
1394 thePrs->setColor(aColor[0], aColor[1], aColor[2]);
1396 thePrs->setDeflection(getResultDeflection(aResult));
1398 thePrs->setTransparency(getResultTransparency(aResult));
1400 FeaturePtr aFeature = ModelAPI_Feature::feature(theObject);
1401 if (aFeature.get()) {
1402 if (aFeature->getKind() == SketchPlugin_Sketch::ID())
1403 thePrs->setWidth(2);
1409 //******************************************************
1410 ObjectPtr PartSet_Module::findPresentedObject(const AISObjectPtr& theAIS) const
1413 ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
1415 /// If last line finished on vertex the lines creation sequence has to be break
1416 ModuleBase_IPropertyPanel* aPanel = aOperation->propertyPanel();
1418 ModuleBase_ModelWidget* anActiveWidget = aPanel->activeWidget();
1419 // if there is an active widget, find the presented object in it
1420 if (!anActiveWidget)
1421 anActiveWidget = aPanel->preselectionWidget();
1423 ModuleBase_WidgetValidated* aWidgetValidated = dynamic_cast<ModuleBase_WidgetValidated*>
1425 if (aWidgetValidated)
1426 anObject = aWidgetValidated->findPresentedObject(theAIS);
1432 //******************************************************
1433 bool PartSet_Module::canBeShaded(Handle(AIS_InteractiveObject) theAIS) const
1435 bool aCanBeShaged = true;
1437 Handle(PartSet_ResultSketchPrs) aPrs = Handle(PartSet_ResultSketchPrs)::DownCast(theAIS);
1439 aCanBeShaged = false;
1441 return aCanBeShaged;
1444 //******************************************************
1445 void PartSet_Module::addObjectBrowserMenu(QMenu* theMenu) const
1447 QObjectPtrList aObjects = myWorkshop->selection()->selectedObjects();
1448 int aSelected = aObjects.size();
1449 SessionPtr aMgr = ModelAPI_Session::get();
1450 QAction* aActivatePartAction = myMenuMgr->action("ACTIVATE_PART_CMD");
1452 bool hasResult = false;
1453 bool hasFeature = false;
1454 bool hasParameter = false;
1455 bool hasCompositeOwner = false;
1456 bool hasResultInHistory = false;
1457 bool hasFolder = false;
1458 ModuleBase_Tools::checkObjects(aObjects, hasResult, hasFeature, hasParameter,
1459 hasCompositeOwner, hasResultInHistory, hasFolder);
1461 ModuleBase_Operation* aCurrentOp = myWorkshop->currentOperation();
1462 if (aSelected == 1) {
1463 ObjectPtr aObject = aObjects.first();
1465 ResultPartPtr aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aObject);
1466 FeaturePtr aFeature = std::dynamic_pointer_cast<ModelAPI_Feature>(aObject);
1467 bool isPart = aPart.get() ||
1468 (aFeature.get() && (aFeature->getKind() == PartSetPlugin_Part::ID()));
1470 DocumentPtr aPartDoc;
1472 aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aFeature->firstResult());
1474 if (aPart.get()) // this may be null is Part feature is disabled
1475 aPartDoc = aPart->partDoc();
1477 theMenu->addAction(aActivatePartAction);
1478 aActivatePartAction->setEnabled((aMgr->activeDocument() != aPartDoc));
1480 } else if (aObject->document() == aMgr->activeDocument()) {
1481 if (hasParameter || hasFeature) {
1482 myMenuMgr->action("EDIT_CMD")->setEnabled(true);
1483 theMenu->addAction(myMenuMgr->action("EDIT_CMD"));
1484 if (aCurrentOp && aFeature.get()) {
1485 if (aCurrentOp->id().toStdString() == aFeature->getKind())
1486 myMenuMgr->action("EDIT_CMD")->setEnabled(false);
1493 myMenuMgr->action("EDIT_CMD")->setEnabled(aCurrentOp == 0);
1494 theMenu->addAction(myMenuMgr->action("EDIT_CMD"));
1495 theMenu->addSeparator();
1498 bool aNotDeactivate = (aCurrentOp == 0);
1499 if (!aNotDeactivate) {
1500 aActivatePartAction->setEnabled(false);
1504 //******************************************************
1505 #define EXPAND_PARENT(OBJ) \
1506 QModelIndex aObjIndex = aDataModel->objectIndex(OBJ); \
1507 if (aObjIndex.isValid()) { \
1508 QModelIndex aParent = aObjIndex.parent(); \
1509 int aCount = aDataModel->rowCount(aParent); \
1511 aTreeView->setExpanded(aParent, true); \
1514 //******************************************************
1515 void PartSet_Module::processEvent(const std::shared_ptr<Events_Message>& theMessage)
1517 if (theMessage->eventID() == Events_Loop::loop()->eventByName(EVENT_DOCUMENT_CHANGED)) {
1518 // Do not change activation of parts if an operation active
1519 static QStringList aAllowActivationList;
1520 if (aAllowActivationList.isEmpty())
1521 aAllowActivationList <<
1522 QString(PartSetPlugin_Part::ID().c_str()) <<
1523 QString(PartSetPlugin_Duplicate::ID().c_str()) <<
1524 QString(PartSetPlugin_Remove::ID().c_str());
1525 if (myWorkshop->currentOperation() &&
1526 (!aAllowActivationList.contains(myWorkshop->currentOperation()->id())))
1528 XGUI_Workshop* aWorkshop = getWorkshop();
1529 XGUI_DataTree* aTreeView = aWorkshop->objectBrowser()->treeView();
1530 QLabel* aLabel = aWorkshop->objectBrowser()->activeDocLabel();
1531 QPalette aPalet = aLabel->palette();
1533 SessionPtr aMgr = ModelAPI_Session::get();
1534 DocumentPtr aActiveDoc = aMgr->activeDocument();
1536 // Clear active part index if there is no Part documents
1537 // It could be not null if document was closed and opened a new
1538 // without closeDocument call
1539 if (aMgr->allOpenedDocuments().size() <= 1)
1540 myActivePartIndex = QModelIndex();
1542 XGUI_DataModel* aDataModel = aWorkshop->objectBrowser()->dataModel();
1543 QModelIndex aOldActive = myActivePartIndex;
1544 myActivePartIndex = aDataModel->documentRootIndex(aActiveDoc, 0);
1545 bool needUpdate = false;
1546 if (myActivePartIndex.isValid()) {
1547 needUpdate = aTreeView->isExpanded(myActivePartIndex);
1549 aTreeView->setExpanded(myActivePartIndex, true);
1551 if ((aOldActive != myActivePartIndex) && (aOldActive.isValid()))
1552 aTreeView->setExpanded(aOldActive, false);
1554 aLabel->setPalette(aPalet);
1555 aWorkshop->updateCommandStatus();
1557 // Update displayed objects in order to update active color
1558 XGUI_Displayer* aDisplayer = aWorkshop->displayer();
1559 QObjectPtrList aObjects = aDisplayer->displayedObjects();
1561 bool aUpdateViewer = false;
1562 foreach(ObjectPtr aObj, aObjects) {
1563 aHidden = !aObj->data() || !aObj->data()->isValid() ||
1564 aObj->isDisabled() || (!aObj->isDisplayed());
1566 aDisplayer->redisplay(aObj, false);
1567 aUpdateViewer = true;
1571 aDisplayer->updateViewer();
1572 // Update tree items if they are expanded
1574 aTreeView->viewport()->update(aTreeView->viewport()->rect());
1576 } else if (theMessage->eventID() == Events_Loop::loop()->eventByName(EVENT_OBJECT_CREATED)) {
1577 std::shared_ptr<ModelAPI_ObjectUpdatedMessage> aUpdMsg =
1578 std::dynamic_pointer_cast<ModelAPI_ObjectUpdatedMessage>(theMessage);
1579 std::set<ObjectPtr> aObjects = aUpdMsg->objects();
1581 ObjectPtr aConstrObj;
1582 ObjectPtr aResultObj;
1583 std::set<ObjectPtr>::const_iterator aIt;
1584 DocumentPtr aRootDoc = ModelAPI_Session::get()->moduleDocument();
1585 for (aIt = aObjects.begin(); aIt != aObjects.end(); ++aIt) {
1586 ObjectPtr aObject = (*aIt);
1587 if ((!aResultObj.get()) && (aObject->groupName() == ModelAPI_ResultBody::group())
1588 && (aObject->document() != aRootDoc))
1589 aResultObj = aObject;
1590 if ((!aConstrObj.get()) && (aObject->groupName() == ModelAPI_ResultConstruction::group())
1591 && (aObject->document() != aRootDoc))
1592 aConstrObj = aObject;
1593 if (aResultObj.get() && aConstrObj.get())
1597 if (aResultObj.get() || aConstrObj.get()) {
1598 XGUI_Workshop* aWorkshop = getWorkshop();
1599 XGUI_DataTree* aTreeView = aWorkshop->objectBrowser()->treeView();
1600 XGUI_DataModel* aDataModel = aWorkshop->objectBrowser()->dataModel();
1602 if (aResultObj.get()) {
1603 EXPAND_PARENT(aResultObj)
1605 if (aConstrObj.get()) {
1606 EXPAND_PARENT(aConstrObj)
1610 else if (theMessage->eventID() == Events_Loop::loop()->eventByName(EVENT_OBJECT_TO_REDISPLAY)) {
1611 CompositeFeaturePtr aSketch = mySketchMgr->activeSketch();
1612 if (aSketch.get()) {
1613 ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
1614 if (PartSet_SketcherMgr::isSketchOperation(anOperation))
1615 mySketchMgr->previewSketchPlane()->createSketchPlane(aSketch, myWorkshop);
1620 //******************************************************
1621 void PartSet_Module::onTreeViewDoubleClick(const QModelIndex& theIndex)
1623 if (myWorkshop->currentOperation()) // Do not change activation of parts if an operation active
1625 SessionPtr aMgr = ModelAPI_Session::get();
1626 if (!theIndex.isValid()) {
1627 // It seems that this code is obsolete
1628 //aMgr->setActiveDocument(aMgr->moduleDocument());
1631 if (theIndex.column() != 1) // Use only first column
1634 XGUI_Workshop* aWorkshop = getWorkshop();
1635 XGUI_DataModel* aDataModel = aWorkshop->objectBrowser()->dataModel();
1636 // De not use non editable Indexes
1637 if ((aDataModel->flags(theIndex) & Qt::ItemIsSelectable) == 0)
1639 ObjectPtr aObj = aDataModel->object(theIndex);
1641 ResultPartPtr aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aObj);
1642 if (!aPart.get()) { // Probably this is Feature
1643 FeaturePtr aPartFeature = std::dynamic_pointer_cast<ModelAPI_Feature>(aObj);
1644 if (aPartFeature.get() && (aPartFeature->getKind() == PartSetPlugin_Part::ID())) {
1645 aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aPartFeature->firstResult());
1648 if (aPart.get()) { // if this is a part
1649 if (aPart->partDoc() == aMgr->activeDocument()) {
1650 myMenuMgr->activatePartSet();
1652 myMenuMgr->activatePart(aPart);
1657 //******************************************************
1658 void PartSet_Module::onViewCreated(ModuleBase_IViewWindow*)
1660 // z layer is created for all started operations in order to visualize operation AIS presentation
1662 Handle(AIS_InteractiveContext) aContext = myWorkshop->viewer()->AISContext();
1663 if (aContext.IsNull())
1666 Handle(V3d_Viewer) aViewer = aContext->CurrentViewer();
1667 if (myVisualLayerId == 0) {
1668 if (myVisualLayerId == 0)
1669 aViewer->AddZLayer(myVisualLayerId);
1671 TColStd_SequenceOfInteger aZList;
1672 aViewer->GetAllZLayers(aZList);
1673 bool aFound = false;
1674 for (int i = 1; i <= aZList.Length(); i++) {
1675 if (aZList(i) == myVisualLayerId) {
1681 aViewer->AddZLayer(myVisualLayerId);
1683 // if there is an active operation with validated widget,
1684 // the filters of this widget should be activated in the created view
1685 myWorkshop->selectionActivate()->updateSelectionFilters();
1686 myWorkshop->selectionActivate()->updateSelectionModes();
1689 //******************************************************
1690 void PartSet_Module::widgetStateChanged(int thePreviousState)
1692 mySketchMgr->widgetStateChanged(thePreviousState);
1695 //******************************************************
1696 bool PartSet_Module::processEnter(const std::string& thePreviousAttributeID)
1698 return mySketchReentrantMgr->processEnter(thePreviousAttributeID);
1701 //******************************************************
1702 void PartSet_Module::beforeOperationStopped(ModuleBase_Operation* theOperation)
1704 if (PartSet_SketcherMgr::isSketchOperation(theOperation)) {
1705 mySketchMgr->stopSketch(theOperation);
1709 //******************************************************
1710 GeomShapePtr PartSet_Module::findShape(const AttributePtr& theAttribute)
1712 GeomShapePtr aGeomShape;
1714 ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
1715 if (anOperation && sketchMgr()->isNestedSketchOperation(anOperation)) {
1716 aGeomShape = PartSet_Tools::findShapeBy2DPoint(theAttribute, myWorkshop);
1721 //******************************************************
1722 AttributePtr PartSet_Module::findAttribute(const ObjectPtr& theObject,
1723 const GeomShapePtr& theGeomShape)
1725 AttributePtr anAttribute;
1726 GeomShapePtr aGeomShape = theGeomShape;
1727 if (!aGeomShape.get()) {
1728 // processing shape of result, e.g. sketch circle center is selected, this is a result
1729 // the geom shape is empty, the shape of result should be used
1730 ResultPtr aResult = std::dynamic_pointer_cast<ModelAPI_Result>(theObject);
1731 if (aResult.get()) {
1732 aGeomShape = aResult->shape();
1736 if (aGeomShape.get()) {
1737 TopoDS_Shape aTDSShape = aGeomShape->impl<TopoDS_Shape>();
1738 std::pair<AttributePtr, int> anAttrAndIndex =
1739 PartSet_Tools::findAttributeBy2dPoint(theObject, aTDSShape, mySketchMgr->activeSketch());
1740 return anAttrAndIndex.first;
1745 //******************************************************
1746 std::shared_ptr<Events_Message> PartSet_Module::reentrantMessage()
1748 return sketchReentranceMgr()->reentrantMessage();
1751 //******************************************************
1752 void PartSet_Module::setReentrantPreSelection(const std::shared_ptr<Events_Message>& theMessage)
1754 sketchReentranceMgr()->setReentrantPreSelection(theMessage);
1757 //******************************************************
1758 void PartSet_Module::onChoiceChanged(ModuleBase_ModelWidget* theWidget,
1761 ModuleBase_WidgetChoice* aChoiceWidget = dynamic_cast<ModuleBase_WidgetChoice*>(theWidget);
1765 QString aChoiceTitle = aChoiceWidget->getPropertyPanelTitle(theIndex);
1766 if (!aChoiceTitle.isEmpty()) {
1767 ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
1770 ModuleBase_IPropertyPanel* aPanel = aOperation->propertyPanel();
1772 aPanel->setWindowTitle(aChoiceTitle);
1776 //******************************************************
1777 XGUI_Workshop* PartSet_Module::getWorkshop() const
1779 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
1780 return aConnector->workshop();
1783 void PartSet_Module::setDefaultConstraintShown()
1785 myHasConstraintShown[PartSet_Tools::Geometrical] = true;
1786 myHasConstraintShown[PartSet_Tools::Dimensional] = true;
1787 myHasConstraintShown[PartSet_Tools::Expressions] = false;
1790 //******************************************************
1791 ModuleBase_ITreeNode* PartSet_Module::rootNode() const
1796 //******************************************************
1797 void PartSet_Module::disableCustomMode(ModuleBase_CustomizeFlag theMode) {
1798 myCustomPrs->disableCustomMode(theMode);
1801 //******************************************************
1802 void PartSet_Module::enableCustomModes() {
1803 myCustomPrs->enableCustomModes();