1 // Copyright (C) 2014-20xx CEA/DEN, EDF R&D
3 #include "PartSet_Module.h"
4 #include "PartSet_WidgetSketchLabel.h"
5 #include "PartSet_Validators.h"
6 #include "PartSet_Tools.h"
7 #include "PartSet_PreviewPlanes.h"
8 #include "PartSet_WidgetPoint2d.h"
9 #include "PartSet_WidgetPoint2dDistance.h"
10 #include "PartSet_WidgetPoint2DFlyout.h"
11 #include "PartSet_WidgetShapeSelector.h"
12 #include "PartSet_WidgetMultiSelector.h"
13 #include "PartSet_WidgetEditor.h"
14 #include "PartSet_WidgetFileSelector.h"
15 #include "PartSet_WidgetSketchCreator.h"
16 #include "PartSet_SketcherMgr.h"
17 #include "PartSet_SketcherReetntrantMgr.h"
18 #include "PartSet_ResultSketchPrs.h"
19 #include "PartSet_MenuMgr.h"
20 #include "PartSet_CustomPrs.h"
21 #include "PartSet_IconFactory.h"
22 #include "PartSet_WidgetChoice.h"
23 #include "PartSet_OverconstraintListener.h"
25 #include "PartSet_Filters.h"
26 #include "PartSet_FilterInfinite.h"
28 #include <PartSetPlugin_Remove.h>
29 #include <PartSetPlugin_Part.h>
30 #include <PartSetPlugin_Duplicate.h>
32 #include <ModuleBase_Operation.h>
33 #include <ModuleBase_OperationAction.h>
34 #include <ModuleBase_IViewer.h>
35 #include <ModuleBase_IViewWindow.h>
36 #include <ModuleBase_IPropertyPanel.h>
37 #include <ModuleBase_WidgetEditor.h>
38 #include <ModuleBase_WidgetValidated.h>
39 #include <ModuleBase_FilterFactory.h>
40 #include <ModuleBase_Tools.h>
41 #include <ModuleBase_OperationFeature.h>
42 #include <ModuleBase_WidgetFactory.h>
43 #include <ModuleBase_OperationDescription.h>
44 #include <ModuleBase_ViewerPrs.h>
46 #include <ModelAPI_Object.h>
47 #include <ModelAPI_Events.h>
48 #include <ModelAPI_Validator.h>
49 #include <ModelAPI_Data.h>
50 #include <ModelAPI_Session.h>
51 #include <ModelAPI_ResultBody.h>
52 #include <ModelAPI_AttributeString.h>
53 #include <ModelAPI_AttributeSelectionList.h>
55 #include <GeomDataAPI_Point2D.h>
56 #include <GeomDataAPI_Point.h>
57 #include <GeomDataAPI_Dir.h>
59 #include <XGUI_Displayer.h>
60 #include <XGUI_Workshop.h>
61 #include <XGUI_OperationMgr.h>
62 #include <XGUI_PropertyPanel.h>
63 #include <XGUI_ModuleConnector.h>
64 #include <XGUI_ContextMenuMgr.h>
65 #include <XGUI_Tools.h>
66 #include <XGUI_ObjectsBrowser.h>
67 #include <XGUI_SelectionMgr.h>
68 #include <XGUI_DataModel.h>
69 #include <XGUI_ErrorMgr.h>
70 #include <XGUI_CustomPrs.h>
71 #include <XGUI_SelectionMgr.h>
73 #include <SketchPlugin_Feature.h>
74 #include <SketchPlugin_Sketch.h>
75 #include <SketchPlugin_ConstraintAngle.h>
76 #include <SketchPlugin_ConstraintLength.h>
77 #include <SketchPlugin_ConstraintDistance.h>
78 #include <SketchPlugin_ConstraintParallel.h>
79 #include <SketchPlugin_ConstraintPerpendicular.h>
80 #include <SketchPlugin_ConstraintRadius.h>
82 #include <SketcherPrs_SymbolPrs.h>
83 #include <SketcherPrs_Tools.h>
85 #include <Events_Loop.h>
86 #include <Config_PropManager.h>
87 #include <Config_Keywords.h>
89 #include <StdSelect_TypeOfFace.hxx>
90 #include <TopoDS_Vertex.hxx>
92 #include <TopoDS_Shape.hxx>
93 #include <BRep_Tool.hxx>
94 #include <AIS_Dimension.hxx>
97 #include <QMouseEvent>
100 #include <QApplication>
101 #include <QMessageBox>
102 #include <QMainWindow>
106 #include <GeomAlgoAPI_FaceBuilder.h>
107 #include <GeomDataAPI_Dir.h>
109 #include <SelectMgr_ListIteratorOfListOfFilter.hxx>
115 /*!Create and return new instance of XGUI_Module*/
116 extern "C" PARTSET_EXPORT ModuleBase_IModule* createModule(ModuleBase_IWorkshop* theWshop)
118 return new PartSet_Module(theWshop);
121 PartSet_Module::PartSet_Module(ModuleBase_IWorkshop* theWshop)
122 : ModuleBase_IModule(theWshop),
125 new PartSet_IconFactory();
127 mySketchMgr = new PartSet_SketcherMgr(this);
128 mySketchReentrantMgr = new PartSet_SketcherReetntrantMgr(theWshop);
130 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(theWshop);
131 XGUI_Workshop* aWorkshop = aConnector->workshop();
133 ModuleBase_IViewer* aViewer = theWshop->viewer();
134 connect(aViewer, SIGNAL(keyRelease(ModuleBase_IViewWindow*, QKeyEvent*)),
135 this, SLOT(onKeyRelease(ModuleBase_IViewWindow*, QKeyEvent*)));
136 connect(aViewer, SIGNAL(viewTransformed(int)),
137 SLOT(onViewTransformed(int)));
138 connect(aViewer, SIGNAL(viewCreated(ModuleBase_IViewWindow*)),
139 SLOT(onViewCreated(ModuleBase_IViewWindow*)));
140 myMenuMgr = new PartSet_MenuMgr(this);
141 myCustomPrs = new PartSet_CustomPrs(theWshop);
143 myOverconstraintListener = new PartSet_OverconstraintListener(theWshop);
145 Events_Loop* aLoop = Events_Loop::loop();
146 aLoop->registerListener(this, Events_Loop::eventByName(EVENT_DOCUMENT_CHANGED));
148 mySelectionFilters.Append(new PartSet_GlobalFilter(myWorkshop));
149 mySelectionFilters.Append(new PartSet_FilterInfinite(myWorkshop));
151 setDefaultConstraintShown();
153 Config_PropManager::registerProp("Visualization", "operation_parameter_color",
154 "Reference shape wireframe color in operation", Config_Prop::Color,
155 PartSet_CustomPrs::OPERATION_PARAMETER_COLOR());
156 Config_PropManager::registerProp("Visualization", "operation_result_color",
157 "Result shape wireframe color in operation", Config_Prop::Color,
158 PartSet_CustomPrs::OPERATION_RESULT_COLOR());
159 Config_PropManager::registerProp("Visualization", "operation_highlight_color",
160 "Multi selector item color in operation", Config_Prop::Color,
161 PartSet_CustomPrs::OPERATION_HIGHLIGHT_COLOR());
164 PartSet_Module::~PartSet_Module()
166 SelectMgr_ListIteratorOfListOfFilter aIt(mySelectionFilters);
167 for (; aIt.More(); aIt.Next()) {
168 Handle(SelectMgr_Filter) aFilter = aIt.Value();
169 if (!aFilter.IsNull())
173 delete myOverconstraintListener;
176 void PartSet_Module::activateSelectionFilters()
178 SelectMgr_ListIteratorOfListOfFilter aIt(mySelectionFilters);
179 for (; aIt.More(); aIt.Next()) {
180 Handle(SelectMgr_Filter) aFilter = aIt.Value();
181 if (!aFilter.IsNull())
182 myWorkshop->viewer()->addSelectionFilter(aFilter);
186 void PartSet_Module::deactivateSelectionFilters()
188 SelectMgr_ListIteratorOfListOfFilter aIt(mySelectionFilters);
189 for (; aIt.More(); aIt.Next()) {
190 Handle(SelectMgr_Filter) aFilter = aIt.Value();
191 if (!aFilter.IsNull())
192 myWorkshop->viewer()->removeSelectionFilter(aFilter);
196 void PartSet_Module::storeSelection()
198 sketchMgr()->storeSelection();
201 void PartSet_Module::restoreSelection()
203 sketchMgr()->restoreSelection();
206 void PartSet_Module::registerValidators()
208 //Registering of validators
209 SessionPtr aMgr = ModelAPI_Session::get();
210 ModelAPI_ValidatorsFactory* aFactory = aMgr->validators();
211 aFactory->registerValidator("PartSet_DistanceSelection", new PartSet_DistanceSelection);
212 aFactory->registerValidator("PartSet_LengthSelection", new PartSet_LengthSelection);
213 aFactory->registerValidator("PartSet_PerpendicularSelection", new PartSet_PerpendicularSelection);
214 aFactory->registerValidator("PartSet_ParallelSelection", new PartSet_ParallelSelection);
215 aFactory->registerValidator("PartSet_RadiusSelection", new PartSet_RadiusSelection);
216 aFactory->registerValidator("PartSet_RigidSelection", new PartSet_RigidSelection);
217 aFactory->registerValidator("PartSet_CoincidentSelection", new PartSet_CoincidentSelection);
218 aFactory->registerValidator("PartSet_HVDirSelection", new PartSet_HVDirSelection);
219 aFactory->registerValidator("PartSet_TangentSelection", new PartSet_TangentSelection);
220 aFactory->registerValidator("PartSet_FilletSelection", new PartSet_FilletSelection);
221 aFactory->registerValidator("PartSet_AngleSelection", new PartSet_AngleSelection);
222 aFactory->registerValidator("PartSet_EqualSelection", new PartSet_EqualSelection);
223 aFactory->registerValidator("PartSet_CollinearSelection", new PartSet_CollinearSelection);
224 aFactory->registerValidator("PartSet_MiddlePointSelection", new PartSet_MiddlePointSelection);
225 aFactory->registerValidator("PartSet_DifferentObjects", new PartSet_DifferentObjectsValidator);
226 aFactory->registerValidator("PartSet_CoincidentAttr", new PartSet_CoincidentAttr);
229 void PartSet_Module::registerFilters()
231 //Registering of selection filters
232 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
233 ModuleBase_FilterFactory* aFactory = aConnector->selectionFilters();
236 void PartSet_Module::registerProperties()
238 Config_PropManager::registerProp("Sketch planes", "planes_size", "Size", Config_Prop::Double,
240 Config_PropManager::registerProp("Sketch planes", "planes_thickness", "Thickness",
241 Config_Prop::Integer, SKETCH_WIDTH);
242 Config_PropManager::registerProp("Sketch planes", "rotate_to_plane", "Rotate to plane when selected",
243 Config_Prop::Boolean, "false");
246 void PartSet_Module::connectToPropertyPanel(ModuleBase_ModelWidget* theWidget, const bool isToConnect)
248 mySketchMgr->connectToPropertyPanel(theWidget, isToConnect);
251 void PartSet_Module::operationCommitted(ModuleBase_Operation* theOperation)
253 if (PartSet_SketcherMgr::isNestedSketchOperation(theOperation)) {
254 mySketchMgr->commitNestedSketch(theOperation);
257 /// Restart sketcher operations automatically
258 if (!mySketchReentrantMgr->operationCommitted(theOperation)) {
260 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>(theOperation);
261 if (aFOperation && !aFOperation->isEditOperation()) {
262 // the selection is cleared after commit the create operation
263 // in order to do not use the same selected objects in the restarted operation
264 // for common behaviour, the selection is cleared even if the operation is not restarted
265 getWorkshop()->selector()->clearSelection();
270 void PartSet_Module::operationAborted(ModuleBase_Operation* theOperation)
272 /// Restart sketcher operations automatically
273 mySketchReentrantMgr->operationAborted(theOperation);
276 void PartSet_Module::operationStarted(ModuleBase_Operation* theOperation)
278 ModuleBase_IWorkshop* anIWorkshop = workshop();
279 if (!theOperation->getDescription()->hasXmlRepresentation()) { //!< No need for property panel
280 anIWorkshop->updateCommandStatus();
283 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>
286 XGUI_Workshop* aWorkshop = XGUI_Tools::workshop(anIWorkshop);
287 XGUI_PropertyPanel* aPropertyPanel = aWorkshop->propertyPanel();
288 ModuleBase_ModelWidget* aFilledWidget = 0;
289 bool aPostonedWidgetActivation = false;
290 FeaturePtr aFeature = aFOperation->feature();
292 std::string aGreedAttributeId = ModuleBase_Tools::findGreedAttribute(anIWorkshop, aFeature);
293 // if there is a greed attribute, automatic commit by preselection for this feature is prohibited
294 aWorkshop->setPropertyPanel(aFOperation);
296 // filling the operation values by the current selection
297 // if the operation can be committed after the controls filling, the method perform should
298 // be stopped. Otherwise unnecessary presentations can be shown(e.g. operation prs in sketch)
299 bool isOperationCommitted = false;
300 if (!aFOperation->isEditOperation()) {
301 aFilledWidget = aFOperation->activateByPreselection(aGreedAttributeId);
302 if (currentOperation() != aFOperation)
303 isOperationCommitted = true;
305 if (aGreedAttributeId.empty()) {
306 // a signal should be emitted before the next widget activation
307 // because, the activation of the next widget will give a focus to the widget. As a result
308 // the value of the widget is initialized. And commit may happens until the value is entered.
310 if (mySketchReentrantMgr->canBeCommittedByPreselection())
311 isOperationCommitted = mySketchMgr->operationActivatedByPreselection();
312 // activate the next obligatory widget
313 if (!isOperationCommitted)
314 aPropertyPanel->activateNextWidget(aFilledWidget);
317 else { // there is a greed widget
318 const QList<ModuleBase_ModelWidget*>& aWidgets = aPropertyPanel->modelWidgets();
319 std::string aFirstAttributeId = aWidgets.front()->attributeID();
320 // activate next widget after greeded if it is the first widget in the panel
321 // else the first panel widget is already activated by operation start
322 if (aFirstAttributeId == aGreedAttributeId)
323 aPostonedWidgetActivation = true;
326 } if (!isOperationCommitted) {
327 anIWorkshop->updateCommandStatus();
328 aWorkshop->connectToPropertyPanel(true);
329 operationStartedInternal(aFOperation);
331 // the objects of the current operation should be deactivated
332 QObjectPtrList anObjects;
333 anObjects.append(aFeature);
334 std::list<ResultPtr> aResults = aFeature->results();
335 std::list<ResultPtr>::const_iterator aIt;
336 for (aIt = aResults.begin(); aIt != aResults.end(); ++aIt) {
337 anObjects.append(*aIt);
339 QObjectPtrList::const_iterator anIt = anObjects.begin(), aLast = anObjects.end();
340 for (; anIt != aLast; anIt++)
341 aWorkshop->deactivateActiveObject(*anIt, false);
342 if (anObjects.size() > 0) {
343 XGUI_Displayer* aDisplayer = aWorkshop->displayer();
344 aDisplayer->updateViewer();
347 if (aPostonedWidgetActivation) {
348 // if the widget is an empty in the chain of activated widgets, the current operation
349 // is restarted. It should be performed after functionality of the operation starting
350 aPropertyPanel->activateNextWidget(aFilledWidget);
356 void PartSet_Module::operationStartedInternal(ModuleBase_Operation* theOperation)
358 /// Restart sketcher operations automatically
359 mySketchReentrantMgr->operationStarted(theOperation);
361 if (PartSet_SketcherMgr::isSketchOperation(theOperation)) {
362 mySketchMgr->startSketch(theOperation);
364 else if (PartSet_SketcherMgr::isNestedSketchOperation(theOperation)) {
365 mySketchMgr->startNestedSketch(theOperation);
368 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>(theOperation);
370 myCustomPrs->activate(aFOperation->feature(), ModuleBase_IModule::CustomizeArguments, true);
371 myCustomPrs->activate(aFOperation->feature(), ModuleBase_IModule::CustomizeResults, true);
375 void PartSet_Module::operationResumed(ModuleBase_Operation* theOperation)
377 ModuleBase_IModule::operationResumed(theOperation);
379 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>(theOperation);
381 myCustomPrs->activate(aFOperation->feature(), ModuleBase_IModule::CustomizeArguments, true);
382 myCustomPrs->activate(aFOperation->feature(), ModuleBase_IModule::CustomizeResults, true);
386 void PartSet_Module::operationStopped(ModuleBase_Operation* theOperation)
388 bool isModifiedArgs = myCustomPrs->deactivate(ModuleBase_IModule::CustomizeArguments, false);
389 bool isModifiedResults = myCustomPrs->deactivate(ModuleBase_IModule::CustomizeResults, false);
390 bool isModified = isModifiedArgs || isModifiedResults;
392 if (PartSet_SketcherMgr::isNestedSketchOperation(theOperation)) {
393 mySketchMgr->stopNestedSketch(theOperation);
395 else if (PartSet_SketcherMgr::isSketchOperation(theOperation))
396 setDefaultConstraintShown();
398 //VSV: Viewer is updated on feature update and redisplay
400 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(myWorkshop);
401 XGUI_Displayer* aDisplayer = aConnector->workshop()->displayer();
402 aDisplayer->updateViewer();
405 QMap<PartSet_Tools::ConstraintVisibleState, bool>::const_iterator anIt = myHasConstraintShown.begin(),
406 aLast = myHasConstraintShown.end();
407 for (; anIt != aLast; anIt++) {
408 mySketchMgr->updateBySketchParameters(anIt.key(), anIt.value());
412 ModuleBase_Operation* PartSet_Module::currentOperation() const
414 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
415 XGUI_OperationMgr* anOpMgr = aConnector->workshop()->operationMgr();
416 return anOpMgr->currentOperation();
419 bool PartSet_Module::canUndo() const
421 bool aCanUndo = false;
422 SessionPtr aMgr = ModelAPI_Session::get();
423 if (aMgr->hasModuleDocument() && aMgr->canUndo()) {
424 aCanUndo = !aMgr->isOperation();
425 if (!aCanUndo) // check the enable state additionally by sketch manager
426 aCanUndo = aMgr->canUndo();
431 bool PartSet_Module::canRedo() const
433 bool aCanRedo = false;
434 SessionPtr aMgr = ModelAPI_Session::get();
435 if (aMgr->hasModuleDocument() && aMgr->canRedo()) {
436 aCanRedo = !aMgr->isOperation();
437 if (!aCanRedo) // check the enable state additionally by sketch manager
438 aCanRedo = aMgr->canRedo();
443 bool PartSet_Module::canApplyAction(const ObjectPtr& theObject, const QString& theActionId) const
446 if (theActionId == "MOVE_CMD") {
447 FeaturePtr aFeature = ModelAPI_Feature::feature(theObject);
449 // part features can not be moved in the history.
450 if (aFeature->getKind() == PartSetPlugin_Part::ID())
457 bool PartSet_Module::canEraseObject(const ObjectPtr& theObject) const
459 // the sketch manager put the restriction to the objects erase
460 return mySketchMgr->canEraseObject(theObject);
463 bool PartSet_Module::canDisplayObject(const ObjectPtr& theObject) const
465 // the sketch manager put the restriction to the objects display
466 return mySketchMgr->canDisplayObject(theObject);
469 /*void PartSet_Module::processHiddenObject(const std::list<ObjectPtr>& theObjects)
471 mySketchMgr->processHiddenObject(theObjects);
474 bool PartSet_Module::canActivateSelection(const ObjectPtr& theObject) const
476 bool aCanActivate = ModuleBase_IModule::canActivateSelection(theObject);
478 ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
479 bool isSketchOp = PartSet_SketcherMgr::isSketchOperation(anOperation),
480 isNestedOp = PartSet_SketcherMgr::isNestedSketchOperation(anOperation);
481 if (isSketchOp || isNestedOp) {
482 // in active sketch operation it is possible to activate operation object in selection
483 // in the edit operation, e.g. points of the line can be moved when the line is edited
484 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>(anOperation);
485 aCanActivate = aCanActivate || (aFOperation && aFOperation->isEditOperation());
490 bool PartSet_Module::addViewerMenu(const QMap<QString, QAction*>& theStdActions,
492 QMap<int, QAction*>& theMenuActions) const
494 return myMenuMgr->addViewerMenu(theStdActions, theParent, theMenuActions);
497 void PartSet_Module::updateViewerMenu(const QMap<QString, QAction*>& theStdActions)
499 myMenuMgr->updateViewerMenu(theStdActions);
502 QString PartSet_Module::getFeatureError(const FeaturePtr& theFeature)
504 QString anError = ModuleBase_IModule::getFeatureError(theFeature);
505 if (anError.isEmpty())
506 anError = sketchMgr()->getFeatureError(theFeature);
511 void PartSet_Module::grantedOperationIds(ModuleBase_Operation* theOperation,
512 QStringList& theIds) const
514 myMenuMgr->grantedOperationIds(theOperation, theIds);
516 if (PartSet_SketcherMgr::isSketchOperation(theOperation)) {
517 XGUI_Workshop* aWorkshop = getWorkshop();
518 theIds.append(aWorkshop->contextMenuMgr()->action("DELETE_CMD")->text());
522 void PartSet_Module::activeSelectionModes(QIntList& theModes)
525 if (mySketchMgr->activeSketch().get())
526 PartSet_SketcherMgr::sketchSelectionModes(theModes);
529 void PartSet_Module::customSubShapesSelectionModes(QIntList& theTypes)
531 if (theTypes.contains(TopAbs_FACE))
532 theTypes.append(SketcherPrs_Tools::Sel_Sketch_Face);
533 if (theTypes.contains(TopAbs_WIRE))
534 theTypes.append(SketcherPrs_Tools::Sel_Sketch_Wire);
537 bool PartSet_Module::isMouseOverWindow()
539 return mySketchMgr->isMouseOverWindow();
542 void PartSet_Module::closeDocument()
547 void PartSet_Module::clearViewer()
549 myCustomPrs->clearPrs();
551 XGUI_Workshop* aWorkshop = getWorkshop();
552 XGUI_Displayer* aDisplayer = aWorkshop->displayer();
553 aDisplayer->deactivateSelectionFilters();
556 void PartSet_Module::propertyPanelDefined(ModuleBase_Operation* theOperation)
558 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>(theOperation);
562 ModuleBase_IPropertyPanel* aPanel = aFOperation->propertyPanel();
563 // we have to manually activate the sketch label in edit mode
564 if (PartSet_SketcherMgr::isSketchOperation(aFOperation) && (aFOperation->isEditOperation()))
565 aPanel->activateWidget(aPanel->modelWidgets().first());
568 bool PartSet_Module::createWidgets(ModuleBase_Operation* theOperation,
569 QList<ModuleBase_ModelWidget*>& theWidgets) const
571 bool aProcessed = false;
573 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>(theOperation);
574 XGUI_Workshop* aWorkshop = getWorkshop();
575 XGUI_PropertyPanel* aPropertyPanel = aWorkshop->propertyPanel();
576 if (mySketchMgr->activeSketch().get() && aFOperation && aPropertyPanel) {
577 ModuleBase_ISelection* aSelection = workshop()->selection();
578 // click on a point in sketch leads here with the point is highlighted, not yet selected
579 QList<ModuleBase_ViewerPrsPtr> aPreselection = aSelection->getHighlighted();
580 if (aPreselection.size() == 1) {
581 ModuleBase_ViewerPrsPtr aSelectedPrs = aPreselection[0];
582 ObjectPtr anObject = aSelectedPrs->object();
584 FeaturePtr aFeature = ModelAPI_Feature::feature(anObject);
585 FeaturePtr anOpFeature = aFOperation->feature();
586 GeomShapePtr aShape = aSelectedPrs->shape();
587 // click on the digit of dimension constrain comes here with an empty shape, so we need the check
588 if (aFeature == anOpFeature && aShape.get() && !aShape->isNull()) {
589 const TopoDS_Shape& aTDShape = aShape->impl<TopoDS_Shape>();
590 AttributePtr anAttribute = PartSet_Tools::findAttributeBy2dPoint(anObject, aTDShape,
591 mySketchMgr->activeSketch());
592 if (anAttribute.get()) {
593 QString aXmlRepr = aFOperation->getDescription()->xmlRepresentation();
594 ModuleBase_WidgetFactory aFactory(aXmlRepr.toStdString(), workshop());
596 const std::string anAttributeId = anAttribute->id();
597 aFactory.createWidget(aPropertyPanel->contentWidget(), anAttributeId);
599 theWidgets = aFactory.getModelWidgets();
600 // it is possible that the point does not present in XML definition,
601 // in this case, we assume that it is not processed by this module
602 // e.g. "Intersection point" feature
603 aProcessed = !theWidgets.isEmpty();
611 void PartSet_Module::onSelectionChanged()
613 ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
617 bool isSketcherOp = false;
618 // An edit operation is enable only if the current opeation is the sketch operation
619 if (mySketchMgr->activeSketch()) {
620 if (PartSet_Tools::sketchPlane(mySketchMgr->activeSketch()))
621 isSketcherOp = PartSet_SketcherMgr::isSketchOperation(aOperation);
624 // Editing of constraints can be done on selection
625 ModuleBase_ISelection* aSelect = myWorkshop->selection();
626 QList<ModuleBase_ViewerPrsPtr> aSelected = aSelect->getSelected();
627 if (aSelected.size() == 1) {
628 ModuleBase_ViewerPrsPtr aPrs = aSelected.first();
629 ObjectPtr aObject = aPrs->object();
630 FeaturePtr aFeature = ModelAPI_Feature::feature(aObject);
632 std::string aId = aFeature->getKind();
633 if ((aId == SketchPlugin_ConstraintRadius::ID()) ||
634 (aId == SketchPlugin_ConstraintLength::ID()) ||
635 (aId == SketchPlugin_ConstraintDistance::ID()) ||
636 (aId == SketchPlugin_ConstraintAngle::ID())) {
637 editFeature(aFeature);
644 void PartSet_Module::onKeyRelease(ModuleBase_IViewWindow* theWnd, QKeyEvent* theEvent)
646 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
647 XGUI_OperationMgr* anOpMgr = aConnector->workshop()->operationMgr();
648 anOpMgr->onKeyReleased(theWnd->viewPort(), theEvent);
651 ModuleBase_ModelWidget* PartSet_Module::createWidgetByType(const std::string& theType,
653 Config_WidgetAPI* theWidgetApi)
655 ModuleBase_IWorkshop* aWorkshop = workshop();
656 XGUI_Workshop* aXUIWorkshop = getWorkshop();
657 ModuleBase_ModelWidget* aWgt = NULL;
658 if (theType == "sketch-start-label") {
659 PartSet_WidgetSketchLabel* aLabelWgt = new PartSet_WidgetSketchLabel(theParent, aWorkshop,
660 theWidgetApi, myHasConstraintShown);
661 connect(aLabelWgt, SIGNAL(planeSelected(const std::shared_ptr<GeomAPI_Pln>&)),
662 mySketchMgr, SLOT(onPlaneSelected(const std::shared_ptr<GeomAPI_Pln>&)));
663 connect(aLabelWgt, SIGNAL(showConstraintToggled(int, bool)),
664 mySketchMgr, SLOT(onShowConstraintsToggle(int, bool)));
666 } else if (theType == "sketch-2dpoint_selector") {
667 PartSet_WidgetPoint2D* aPointWgt = new PartSet_WidgetPoint2D(theParent, aWorkshop,
669 aPointWgt->setSketch(mySketchMgr->activeSketch());
670 connect(aPointWgt, SIGNAL(vertexSelected()), sketchReentranceMgr(), SLOT(onVertexSelected()));
672 }else if (theType == "sketch-2dpoint_flyout_selector") {
673 PartSet_WidgetPoint2DFlyout* aPointWgt = new PartSet_WidgetPoint2DFlyout(theParent, aWorkshop,
675 aPointWgt->setSketch(mySketchMgr->activeSketch());
676 connect(aPointWgt, SIGNAL(vertexSelected()), sketchReentranceMgr(), SLOT(onVertexSelected()));
678 } else if (theType == "point2ddistance") {
679 PartSet_WidgetPoint2dDistance* aDistanceWgt = new PartSet_WidgetPoint2dDistance(theParent,
680 aWorkshop, theWidgetApi);
681 aDistanceWgt->setSketch(mySketchMgr->activeSketch());
683 } else if (theType == "sketch_shape_selector") {
684 PartSet_WidgetShapeSelector* aShapeSelectorWgt =
685 new PartSet_WidgetShapeSelector(theParent, aWorkshop, theWidgetApi);
686 aShapeSelectorWgt->setSketcher(mySketchMgr->activeSketch());
687 aWgt = aShapeSelectorWgt;
688 } else if (theType == "sketch_multi_selector") {
689 PartSet_WidgetMultiSelector* aShapeSelectorWgt =
690 new PartSet_WidgetMultiSelector(theParent, aWorkshop, theWidgetApi);
691 aShapeSelectorWgt->setSketcher(mySketchMgr->activeSketch());
692 aWgt = aShapeSelectorWgt;
694 else if (theType == WDG_DOUBLEVALUE_EDITOR) {
695 aWgt = new PartSet_WidgetEditor(theParent, aWorkshop, theWidgetApi);
696 } else if (theType == "export_file_selector") {
697 aWgt = new PartSet_WidgetFileSelector(theParent, aWorkshop, theWidgetApi);
698 } else if (theType == "sketch_launcher") {
699 aWgt = new PartSet_WidgetSketchCreator(theParent, this, theWidgetApi);
700 } else if (theType == "module_choice") {
701 aWgt = new PartSet_WidgetChoice(theParent, theWidgetApi);
702 connect(aWgt, SIGNAL(itemSelected(ModuleBase_ModelWidget*, int)),
703 this, SLOT(onChoiceChanged(ModuleBase_ModelWidget*, int)));
708 ModuleBase_ModelWidget* PartSet_Module::activeWidget() const
710 ModuleBase_ModelWidget* anActiveWidget = 0;
712 anActiveWidget = mySketchReentrantMgr->internalActiveWidget();
713 if (!anActiveWidget) {
714 ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
716 ModuleBase_IPropertyPanel* aPanel = aOperation->propertyPanel();
717 anActiveWidget = aPanel->activeWidget();
720 return anActiveWidget;
723 bool PartSet_Module::deleteObjects()
725 bool isProcessed = false;
727 XGUI_Workshop* aWorkshop = getWorkshop();
728 XGUI_OperationMgr* anOpMgr = aWorkshop->operationMgr();
730 //SessionPtr aMgr = ModelAPI_Session::get();
731 // 1. check whether the delete should be processed in the module
732 ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
733 bool isSketchOp = PartSet_SketcherMgr::isSketchOperation(anOperation),
734 isNestedOp = PartSet_SketcherMgr::isNestedSketchOperation(anOperation);
735 if (isSketchOp || isNestedOp) {
737 // 2. find selected presentations
738 // selected objects should be collected before the current operation abort because
739 // the abort leads to selection lost on constraint objects. It can be corrected after #386 issue
740 ModuleBase_ISelection* aSel = workshop()->selection();
741 QObjectPtrList aSelectedObj = aSel->selectedPresentations();
742 // if there are no selected objects in the viewer, that means that the selection in another
743 // place cased this method. It is necessary to return the false value to understande in above
744 // method that delete is not processed
745 if (aSelectedObj.count() == 0)
748 // avoid delete of the objects, which are not belong to the current sketch
749 // in order to do not delete results of other sketches
750 QObjectPtrList aSketchObjects;
751 QObjectPtrList::const_iterator anIt = aSelectedObj.begin(), aLast = aSelectedObj.end();
752 for ( ; anIt != aLast; anIt++) {
753 ObjectPtr anObject = *anIt;
754 if (mySketchMgr->isObjectOfSketch(anObject)) {
755 // sketch feature should be used in this list because workshop deletes features only
756 // results are skipped
757 FeaturePtr aSketchFeature = ModelAPI_Feature::feature(anObject);
758 aSketchObjects.append(aSketchFeature);
761 // if the selection contains only local selected presentations from other sketches,
762 // the Delete operation should not be done at all
763 if (aSketchObjects.size() == 0)
766 // 3. start operation
767 QString aDescription = aWorkshop->contextMenuMgr()->action("DELETE_CMD")->text();
768 ModuleBase_OperationAction* anOpAction = new ModuleBase_OperationAction(aDescription, this);
770 // the active nested sketch operation should be aborted unconditionally
771 // the Delete action should be additionally granted for the Sketch operation
772 // in order to do not abort/commit it
773 if (!anOpMgr->canStartOperation(anOpAction->id()))
774 return true; // the objects are processed but can not be deleted
776 anOpMgr->startOperation(anOpAction);
778 // WORKAROUND, should be done to avoid viewer highlight update after deletetion of objects
779 // the problem is in AIS Dimensions recompute if a line and the dim are removed, line is the first
780 // it causes the AIS recompute, where the base line is null, the result is empty AIS in the viewer
781 XGUI_Tools::workshop(myWorkshop)->selector()->clearSelection();
783 // 4. delete features
784 // sketch feature should be skipped, only sub-features can be removed
785 // when sketch operation is active
786 aWorkshop->deleteFeatures(aSketchObjects);
788 anOpMgr->commitOperation();
793 void PartSet_Module::onFeatureTriggered()
795 QAction* aCmd = dynamic_cast<QAction*>(sender());
796 if (aCmd->isCheckable() && aCmd->isChecked()) {
797 // 1. check whether the delete should be processed in the module
798 ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
799 bool isNestedOp = PartSet_SketcherMgr::isNestedCreateOperation(anOperation);
801 // in case if in the viewer nothing is displayed, the create operation should not be
802 // comitted even if all values of the feature are initialized
803 if (!mySketchMgr->canDisplayCurrentCreatedFeature()) {
804 // the action information should be saved before the operation is aborted
805 // because this abort leads to update command status, which unchecks this action
806 anOperation->abort();
807 launchOperation(aCmd->data().toString());
811 ModuleBase_IModule::onFeatureTriggered();
814 void PartSet_Module::editFeature(FeaturePtr theFeature)
816 storeConstraintsState(theFeature->getKind());
817 ModuleBase_IModule::editFeature(theFeature);
820 bool PartSet_Module::canCommitOperation() const
825 void PartSet_Module::launchOperation(const QString& theCmdId)
827 storeConstraintsState(theCmdId.toStdString());
828 ModuleBase_IModule::launchOperation(theCmdId);
831 void PartSet_Module::storeConstraintsState(const std::string& theFeatureKind)
833 if (myWorkshop->currentOperation() &&
834 myWorkshop->currentOperation()->id().toStdString() == SketchPlugin_Sketch::ID()) {
835 const QMap<PartSet_Tools::ConstraintVisibleState, bool>& aShownStates =
836 mySketchMgr->showConstraintStates();
837 myHasConstraintShown = aShownStates;
839 if (PartSet_SketcherMgr::constraintsIdList().contains(theFeatureKind.c_str())) {
840 // Show constraints if a constraint was anOperation
841 mySketchMgr->updateBySketchParameters(PartSet_Tools::Geometrical, true);
842 mySketchMgr->updateBySketchParameters(PartSet_Tools::Dimensional, true);
843 mySketchMgr->updateBySketchParameters(PartSet_Tools::Expressions,
844 myHasConstraintShown[PartSet_Tools::Expressions]);
848 void PartSet_Module::onObjectDisplayed(ObjectPtr theObject, AISObjectPtr theAIS)
850 Handle(AIS_InteractiveObject) anAIS = theAIS->impl<Handle(AIS_InteractiveObject)>();
851 if (!anAIS.IsNull()) {
852 Handle(AIS_InteractiveContext) aCtx = anAIS->GetContext();
853 Handle(AIS_Dimension) aDim = Handle(AIS_Dimension)::DownCast(anAIS);
854 if (!aDim.IsNull()) {
855 aCtx->SetZLayer(aDim, myVisualLayerId);
857 Handle(SketcherPrs_SymbolPrs) aCons = Handle(SketcherPrs_SymbolPrs)::DownCast(anAIS);
859 aCtx->SetZLayer(aCons, myVisualLayerId);
864 void PartSet_Module::onBeforeObjectErase(ObjectPtr theObject, AISObjectPtr theAIS)
867 // it should be recomputed in order to disappear in the viewer if the corresponded object
869 //if (myCustomPrs->isActive())
870 // myCustomPrs->redisplay(theObject, false);
873 void PartSet_Module::onViewTransformed(int theTrsfType)
875 // Set length of arrows constant in pixel size
876 // if the operation is panning or rotate or panglobal then do nothing
877 if ((theTrsfType == 1) || (theTrsfType == 3) || (theTrsfType == 4))
879 ModuleBase_IViewer* aViewer = myWorkshop->viewer();
880 Handle(AIS_InteractiveContext) aContext = aViewer->AISContext();
881 if (aContext.IsNull())
884 //Handle(V3d_View) aView = aViewer->activeView();
886 XGUI_Workshop* aWorkshop = getWorkshop();
887 XGUI_Displayer* aDisplayer = aWorkshop->displayer();
888 Handle(V3d_Viewer) aV3dViewer = aContext->CurrentViewer();
889 Handle(V3d_View) aView;
891 for (aV3dViewer->InitDefinedViews();
892 aV3dViewer->MoreDefinedViews();
893 aV3dViewer->NextDefinedViews()) {
894 Handle(V3d_View) aV = aV3dViewer->DefinedView();
895 double aS = aV->Scale();
903 double aLen = aView->Convert(SketcherPrs_Tools::getDefaultArrowSize());
905 double aPrevLen = SketcherPrs_Tools::getArrowSize();
906 SketcherPrs_Tools::setArrowSize(aLen);
907 const double aPrevScale = aViewer->Scale(aViewer->activeView());
908 const double aCurScale = aViewer->activeView()->Camera()->Scale();
909 aViewer->SetScale(aViewer->activeView(), aCurScale);
910 SketcherPrs_Tools::setTextHeight (aCurScale / aPrevScale * SketcherPrs_Tools::getTextHeight());
911 bool isModified = false;
912 QList<AISObjectPtr> aPrsList = aDisplayer->displayedPresentations();
913 foreach (AISObjectPtr aAIS, aPrsList) {
914 Handle(AIS_InteractiveObject) aAisObj = aAIS->impl<Handle(AIS_InteractiveObject)>();
916 Handle(AIS_Dimension) aDim = Handle(AIS_Dimension)::DownCast(aAisObj);
917 if (!aDim.IsNull()) {
918 aDim->DimensionAspect()->ArrowAspect()->SetLength(aLen);
919 aContext->Redisplay(aDim, false);
924 aDisplayer->updateViewer();
927 void PartSet_Module::activateCustomPrs(const FeaturePtr& theFeature, const ModuleBase_CustomizeFlag& theFlag,
928 const bool theUpdateViewer)
930 myCustomPrs->activate(theFeature, theFlag, theUpdateViewer);
933 void PartSet_Module::deactivateCustomPrs(const ModuleBase_CustomizeFlag& theFlag,
934 const bool theUpdateViewer)
936 myCustomPrs->deactivate(theFlag, theUpdateViewer);
939 bool PartSet_Module::customisePresentation(ResultPtr theResult, AISObjectPtr thePrs,
940 std::shared_ptr<GeomAPI_ICustomPrs> theCustomPrs)
942 bool aCustomized = false;
947 XGUI_Workshop* aWorkshop = getWorkshop();
948 XGUI_Displayer* aDisplayer = aWorkshop->displayer();
949 ObjectPtr anObject = aDisplayer->getObject(thePrs);
950 if (anObject.get()) {
951 bool isConflicting = myOverconstraintListener->isConflictingObject(anObject);
952 // customize sketch symbol presentation
954 Handle(AIS_InteractiveObject) anAISIO = thePrs->impl<Handle(AIS_InteractiveObject)>();
955 if (!anAISIO.IsNull()) {
956 if (!Handle(SketcherPrs_SymbolPrs)::DownCast(anAISIO).IsNull()) {
957 Handle(SketcherPrs_SymbolPrs) aPrs = Handle(SketcherPrs_SymbolPrs)::DownCast(anAISIO);
958 if (!aPrs.IsNull()) {
959 std::vector<int> aColor;
960 myOverconstraintListener->getConflictingColor(aColor);
961 aPrs->SetConflictingConstraint(isConflicting, aColor);
967 // customize sketch dimension constraint presentation
969 std::vector<int> aColor;
971 myOverconstraintListener->getConflictingColor(aColor);
974 XGUI_CustomPrs::getDefaultColor(anObject, true, aColor);
975 if (!aColor.empty()) {
976 aCustomized = thePrs->setColor(aColor[0], aColor[1], aColor[2]);
980 // customize dimentional constrains
981 sketchMgr()->customizePresentation(anObject);
987 bool PartSet_Module::customizeObject(ObjectPtr theObject, const ModuleBase_CustomizeFlag& theFlag,
988 const bool theUpdateViewer)
990 bool isRedisplayed = false;
991 if (myCustomPrs->isActive(theFlag))
992 isRedisplayed = myCustomPrs->redisplay(theObject, theFlag, theUpdateViewer);
994 return isRedisplayed;
997 void PartSet_Module::customizeObjectBrowser(QWidget* theObjectBrowser)
999 XGUI_ObjectsBrowser* aOB = dynamic_cast<XGUI_ObjectsBrowser*>(theObjectBrowser);
1001 QLabel* aLabel = aOB->activeDocLabel();
1002 aLabel->installEventFilter(myMenuMgr);
1003 connect(aLabel, SIGNAL(customContextMenuRequested(const QPoint&)),
1004 SLOT(onActiveDocPopup(const QPoint&)));
1005 //QPalette aPalet = aLabel->palette();
1006 //aPalet.setColor(QPalette::Text, QColor(0, 72, 140));
1007 //aLabel->setPalette(aPalet);
1008 aOB->treeView()->setExpandsOnDoubleClick(false);
1009 connect(aOB->treeView(), SIGNAL(doubleClicked(const QModelIndex&)),
1010 SLOT(onTreeViewDoubleClick(const QModelIndex&)));
1014 void PartSet_Module::onActiveDocPopup(const QPoint& thePnt)
1016 SessionPtr aMgr = ModelAPI_Session::get();
1017 QAction* aActivatePartAction = myMenuMgr->action("ACTIVATE_PARTSET_CMD");
1019 XGUI_Workshop* aWorkshop = getWorkshop();
1020 QLabel* aHeader = aWorkshop->objectBrowser()->activeDocLabel();
1022 aActivatePartAction->setEnabled((aMgr->activeDocument() != aMgr->moduleDocument()));
1025 aMenu.addAction(aActivatePartAction);
1026 aMenu.exec(aHeader->mapToGlobal(thePnt));
1029 Handle(AIS_InteractiveObject) PartSet_Module::createPresentation(const ResultPtr& theResult)
1031 return mySketchMgr->createPresentation(theResult);
1035 ObjectPtr PartSet_Module::findPresentedObject(const AISObjectPtr& theAIS) const
1038 ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
1040 /// If last line finished on vertex the lines creation sequence has to be break
1041 ModuleBase_IPropertyPanel* aPanel = aOperation->propertyPanel();
1043 ModuleBase_ModelWidget* anActiveWidget = aPanel->activeWidget();
1044 // if there is an active widget, find the presented object in it
1045 if (!anActiveWidget)
1046 anActiveWidget = aPanel->preselectionWidget();
1048 ModuleBase_WidgetValidated* aWidgetValidated = dynamic_cast<ModuleBase_WidgetValidated*>
1050 if (aWidgetValidated)
1051 anObject = aWidgetValidated->findPresentedObject(theAIS);
1057 bool PartSet_Module::canBeShaded(Handle(AIS_InteractiveObject) theAIS) const
1059 bool aCanBeShaged = true;
1061 Handle(PartSet_ResultSketchPrs) aPrs = Handle(PartSet_ResultSketchPrs)::DownCast(theAIS);
1063 aCanBeShaged = false;
1065 return aCanBeShaged;
1068 void PartSet_Module::addObjectBrowserMenu(QMenu* theMenu) const
1070 QObjectPtrList aObjects = myWorkshop->selection()->selectedObjects();
1071 int aSelected = aObjects.size();
1072 SessionPtr aMgr = ModelAPI_Session::get();
1073 QAction* aActivatePartAction = myMenuMgr->action("ACTIVATE_PART_CMD");
1075 ModuleBase_Operation* aCurrentOp = myWorkshop->currentOperation();
1076 if (aSelected == 1) {
1077 bool hasResult = false;
1078 bool hasFeature = false;
1079 bool hasParameter = false;
1080 bool hasCompositeOwner = false;
1081 ModuleBase_Tools::checkObjects(aObjects, hasResult, hasFeature, hasParameter,
1083 ObjectPtr aObject = aObjects.first();
1085 ResultPartPtr aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aObject);
1086 FeaturePtr aFeature = std::dynamic_pointer_cast<ModelAPI_Feature>(aObject);
1087 bool isPart = aPart.get() ||
1088 (aFeature.get() && (aFeature->getKind() == PartSetPlugin_Part::ID()));
1090 DocumentPtr aPartDoc;
1092 aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aFeature->firstResult());
1094 if (aPart.get()) // this may be null is Part feature is disabled
1095 aPartDoc = aPart->partDoc();
1097 theMenu->addAction(aActivatePartAction);
1098 aActivatePartAction->setEnabled((aMgr->activeDocument() != aPartDoc));
1100 } else if (aObject->document() == aMgr->activeDocument()) {
1101 if (hasParameter || hasFeature) {
1102 myMenuMgr->action("EDIT_CMD")->setEnabled(true);
1103 theMenu->addAction(myMenuMgr->action("EDIT_CMD"));
1104 if (aCurrentOp && aFeature.get()) {
1105 if (aCurrentOp->id().toStdString() == aFeature->getKind())
1106 myMenuMgr->action("EDIT_CMD")->setEnabled(false);
1111 ResultBodyPtr aResult = std::dynamic_pointer_cast<ModelAPI_ResultBody>(aObject);
1113 theMenu->addAction(myMenuMgr->action("SELECT_PARENT_CMD"));
1116 bool aNotDeactivate = (aCurrentOp == 0);
1117 if (!aNotDeactivate) {
1118 aActivatePartAction->setEnabled(false);
1122 void PartSet_Module::processEvent(const std::shared_ptr<Events_Message>& theMessage)
1124 if (theMessage->eventID() == Events_Loop::loop()->eventByName(EVENT_DOCUMENT_CHANGED)) {
1125 // Do not change activation of parts if an operation active
1126 static QStringList aAllowActivationList;
1127 if (aAllowActivationList.isEmpty())
1128 aAllowActivationList <<
1129 QString(PartSetPlugin_Part::ID().c_str()) <<
1130 QString(PartSetPlugin_Duplicate::ID().c_str()) <<
1131 QString(PartSetPlugin_Remove::ID().c_str());
1132 if (myWorkshop->currentOperation() &&
1133 (!aAllowActivationList.contains(myWorkshop->currentOperation()->id())))
1135 XGUI_Workshop* aWorkshop = getWorkshop();
1136 XGUI_DataTree* aTreeView = aWorkshop->objectBrowser()->treeView();
1137 QLabel* aLabel = aWorkshop->objectBrowser()->activeDocLabel();
1138 QPalette aPalet = aLabel->palette();
1140 SessionPtr aMgr = ModelAPI_Session::get();
1141 DocumentPtr aActiveDoc = aMgr->activeDocument();
1142 if (aActivePartIndex.isValid())
1143 aTreeView->setExpanded(aActivePartIndex, false);
1144 XGUI_DataModel* aDataModel = aWorkshop->objectBrowser()->dataModel();
1145 aActivePartIndex = aDataModel->documentRootIndex(aActiveDoc);
1146 if (aActivePartIndex.isValid())
1147 aTreeView->setExpanded(aActivePartIndex, true);
1149 aLabel->setPalette(aPalet);
1150 aWorkshop->updateCommandStatus();
1152 // Update displayed objects in order to update active color
1153 XGUI_Displayer* aDisplayer = aWorkshop->displayer();
1154 QObjectPtrList aObjects = aDisplayer->displayedObjects();
1156 foreach(ObjectPtr aObj, aObjects) {
1157 //TODO: replace by redisplay event.
1158 aHidden = !aObj->data() || !aObj->data()->isValid() ||
1159 aObj->isDisabled() || (!aObj->isDisplayed());
1161 aDisplayer->redisplay(aObj, false);
1163 aDisplayer->updateViewer();
1167 void PartSet_Module::onTreeViewDoubleClick(const QModelIndex& theIndex)
1169 if (myWorkshop->currentOperation()) // Do not change activation of parts if an operation active
1171 SessionPtr aMgr = ModelAPI_Session::get();
1172 if (!theIndex.isValid()) {
1173 aMgr->setActiveDocument(aMgr->moduleDocument());
1176 if (theIndex.column() != 0) // Use only first column
1179 XGUI_Workshop* aWorkshop = getWorkshop();
1180 XGUI_DataModel* aDataModel = aWorkshop->objectBrowser()->dataModel();
1181 // De not use non editable Indexes
1182 if ((aDataModel->flags(theIndex) & Qt::ItemIsSelectable) == 0)
1184 ObjectPtr aObj = aDataModel->object(theIndex);
1186 ResultPartPtr aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aObj);
1187 if (!aPart.get()) { // Probably this is Feature
1188 FeaturePtr aPartFeature = std::dynamic_pointer_cast<ModelAPI_Feature>(aObj);
1189 if (aPartFeature.get() && (aPartFeature->getKind() == PartSetPlugin_Part::ID())) {
1190 aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aPartFeature->firstResult());
1193 if (aPart.get()) { // if this is a part
1194 if (aPart->partDoc() == aMgr->activeDocument()) {
1195 myMenuMgr->activatePartSet();
1203 void PartSet_Module::onViewCreated(ModuleBase_IViewWindow*)
1205 // z layer is created for all started operations in order to visualize operation AIS presentation
1207 Handle(AIS_InteractiveContext) aContext = myWorkshop->viewer()->AISContext();
1208 if (aContext.IsNull())
1211 Handle(V3d_Viewer) aViewer = aContext->CurrentViewer();
1212 if (myVisualLayerId == 0) {
1213 if (myVisualLayerId == 0)
1214 aViewer->AddZLayer(myVisualLayerId);
1216 TColStd_SequenceOfInteger aZList;
1217 aViewer->GetAllZLayers(aZList);
1218 bool aFound = false;
1219 for (int i = 1; i <= aZList.Length(); i++) {
1220 if (aZList(i) == myVisualLayerId) {
1226 aViewer->AddZLayer(myVisualLayerId);
1228 // if there is an active operation with validated widget,
1229 // the filters of this widget should be activated in the created view
1230 ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
1232 ModuleBase_ModelWidget* anActiveWidget = activeWidget();
1233 if (anActiveWidget) {
1234 ModuleBase_WidgetSelector* aWSelector = dynamic_cast<ModuleBase_WidgetSelector*>(anActiveWidget);
1236 aWSelector->activateSelectionAndFilters(true);
1241 //******************************************************
1242 void PartSet_Module::widgetStateChanged(int thePreviousState)
1244 mySketchMgr->widgetStateChanged(thePreviousState);
1247 bool PartSet_Module::processEnter(const std::string& thePreviousAttributeID)
1249 return mySketchReentrantMgr->processEnter(thePreviousAttributeID);
1252 //******************************************************
1253 void PartSet_Module::beforeOperationStarted(ModuleBase_Operation* theOperation)
1257 //******************************************************
1258 void PartSet_Module::beforeOperationStopped(ModuleBase_Operation* theOperation)
1260 if (PartSet_SketcherMgr::isSketchOperation(theOperation)) {
1261 mySketchMgr->stopSketch(theOperation);
1265 //******************************************************
1266 GeomShapePtr PartSet_Module::findShape(const AttributePtr& theAttribute)
1268 GeomShapePtr aGeomShape;
1270 ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
1271 if (anOperation && PartSet_SketcherMgr::isNestedSketchOperation(anOperation)) {
1272 aGeomShape = PartSet_Tools::findShapeBy2DPoint(theAttribute, myWorkshop);
1277 //******************************************************
1278 AttributePtr PartSet_Module::findAttribute(const ObjectPtr& theObject,
1279 const GeomShapePtr& theGeomShape)
1281 AttributePtr anAttribute;
1282 GeomShapePtr aGeomShape = theGeomShape;
1283 if (!aGeomShape.get()) {
1284 // processing shape of result, e.g. sketch circle center is selected, this is a result
1285 // the geom shape is empty, the shape of result should be used
1286 ResultPtr aResult = std::dynamic_pointer_cast<ModelAPI_Result>(theObject);
1287 if (aResult.get()) {
1288 aGeomShape = aResult->shape();
1292 if (aGeomShape.get()) {
1293 TopoDS_Shape aTDSShape = aGeomShape->impl<TopoDS_Shape>();
1294 return PartSet_Tools::findAttributeBy2dPoint(theObject, aTDSShape,
1295 mySketchMgr->activeSketch());
1300 //******************************************************
1301 void PartSet_Module::onChoiceChanged(ModuleBase_ModelWidget* theWidget,
1304 PartSet_WidgetChoice* aChoiceWidget = dynamic_cast<PartSet_WidgetChoice*>(theWidget);
1308 QString aChoiceTitle = aChoiceWidget->getPropertyPanelTitle(theIndex);
1309 if (!aChoiceTitle.isEmpty()) {
1310 ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
1313 ModuleBase_IPropertyPanel* aPanel = aOperation->propertyPanel();
1315 aPanel->setWindowTitle(aChoiceTitle);
1319 //******************************************************
1320 XGUI_Workshop* PartSet_Module::getWorkshop() const
1322 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
1323 return aConnector->workshop();
1326 //******************************************************
1327 void PartSet_Module::setDefaultConstraintShown()
1329 myHasConstraintShown[PartSet_Tools::Geometrical] = true;
1330 myHasConstraintShown[PartSet_Tools::Dimensional] = true;
1331 myHasConstraintShown[PartSet_Tools::Expressions] = false;