1 // Copyright (C) 2014-20xx CEA/DEN, EDF R&D
3 #include "PartSet_Module.h"
4 #include "PartSet_WidgetSketchLabel.h"
5 #include "PartSet_Validators.h"
6 #include "PartSet_Tools.h"
7 #include "PartSet_WidgetPoint2d.h"
8 #include "PartSet_WidgetPoint2dDistance.h"
9 #include "PartSet_WidgetShapeSelector.h"
10 #include "PartSet_WidgetPoint2dAngle.h"
11 #include "PartSet_WidgetMultiSelector.h"
12 #include "PartSet_WidgetEditor.h"
13 #include "PartSet_WidgetFileSelector.h"
14 #include "PartSet_WidgetSketchCreator.h"
15 #include "PartSet_SketcherMgr.h"
16 #include "PartSet_MenuMgr.h"
18 #include <PartSetPlugin_Remove.h>
19 #include <PartSetPlugin_Part.h>
21 #include <ModuleBase_Operation.h>
22 #include <ModuleBase_IViewer.h>
23 #include <ModuleBase_IViewWindow.h>
24 #include <ModuleBase_IPropertyPanel.h>
25 #include <ModuleBase_WidgetEditor.h>
26 #include <ModuleBase_FilterFactory.h>
27 #include <ModuleBase_Tools.h>
28 #include <GeomValidators_ShapeType.h>
30 #include <GeomValidators_Face.h>
31 #include <GeomValidators_ConstructionComposite.h>
32 #include <GeomValidators_ZeroOffset.h>
35 #include <ModelAPI_Object.h>
36 #include <ModelAPI_Events.h>
37 #include <ModelAPI_Validator.h>
38 #include <ModelAPI_Data.h>
39 #include <ModelAPI_Session.h>
40 #include <ModelAPI_ShapeValidator.h>
42 #include <GeomDataAPI_Point2D.h>
43 #include <GeomDataAPI_Point.h>
44 #include <GeomDataAPI_Dir.h>
46 #include <XGUI_Displayer.h>
47 #include <XGUI_Workshop.h>
48 #include <XGUI_OperationMgr.h>
49 #include <XGUI_PropertyPanel.h>
50 #include <XGUI_ModuleConnector.h>
51 #include <XGUI_ContextMenuMgr.h>
52 #include <XGUI_Tools.h>
53 #include <XGUI_ObjectsBrowser.h>
55 #include <SketchPlugin_Feature.h>
56 #include <SketchPlugin_Sketch.h>
57 #include <SketchPlugin_Line.h>
58 #include <SketchPlugin_Arc.h>
59 #include <SketchPlugin_Circle.h>
60 #include <SketchPlugin_Point.h>
61 #include <SketchPlugin_ConstraintLength.h>
62 #include <SketchPlugin_ConstraintDistance.h>
63 #include <SketchPlugin_ConstraintParallel.h>
64 #include <SketchPlugin_ConstraintPerpendicular.h>
65 #include <SketchPlugin_ConstraintRadius.h>
67 #include <SketcherPrs_SymbolPrs.h>
68 #include <SketcherPrs_Tools.h>
70 #include <Events_Loop.h>
71 #include <Config_PropManager.h>
72 #include <Config_Keywords.h>
74 #include <StdSelect_TypeOfFace.hxx>
75 #include <TopoDS_Vertex.hxx>
77 #include <TopoDS_Shape.hxx>
78 #include <BRep_Tool.hxx>
79 #include <AIS_Dimension.hxx>
82 #include <QMouseEvent>
85 #include <QApplication>
86 #include <QMessageBox>
87 #include <QMainWindow>
90 #include <GeomAlgoAPI_FaceBuilder.h>
91 #include <GeomDataAPI_Dir.h>
99 /*!Create and return new instance of XGUI_Module*/
100 extern "C" PARTSET_EXPORT ModuleBase_IModule* createModule(ModuleBase_IWorkshop* theWshop)
102 return new PartSet_Module(theWshop);
105 PartSet_Module::PartSet_Module(ModuleBase_IWorkshop* theWshop)
106 : ModuleBase_IModule(theWshop),
107 myRestartingMode(RM_None), myVisualLayerId(0)
109 mySketchMgr = new PartSet_SketcherMgr(this);
110 myDataModel = new PartSet_DocumentDataModel(this);
112 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(theWshop);
113 XGUI_Workshop* aWorkshop = aConnector->workshop();
115 XGUI_OperationMgr* anOpMgr = aWorkshop->operationMgr();
116 connect(anOpMgr, SIGNAL(keyEnterReleased()), this, SLOT(onEnterReleased()));
117 connect(anOpMgr, SIGNAL(operationActivatedByPreselection()),
118 this, SLOT(onOperationActivatedByPreselection()));
120 ModuleBase_IViewer* aViewer = theWshop->viewer();
121 connect(aViewer, SIGNAL(keyRelease(ModuleBase_IViewWindow*, QKeyEvent*)),
122 this, SLOT(onKeyRelease(ModuleBase_IViewWindow*, QKeyEvent*)));
123 connect(aViewer, SIGNAL(viewTransformed(int)),
124 SLOT(onViewTransformed(int)));
126 myMenuMgr = new PartSet_MenuMgr(this);
128 Events_Loop* aLoop = Events_Loop::loop();
129 aLoop->registerListener(this, Events_Loop::eventByName(EVENT_DOCUMENT_CHANGED));
131 if (myFilterInfinite.IsNull())
132 myFilterInfinite = new PartSet_FilterInfinite();
133 myWorkshop->viewer()->addSelectionFilter(myFilterInfinite);
136 PartSet_Module::~PartSet_Module()
138 if (!myDocumentShapeFilter.IsNull())
139 myDocumentShapeFilter.Nullify();
140 if (!myFilterInfinite.IsNull())
141 myFilterInfinite.Nullify();
144 void PartSet_Module::registerValidators()
146 //Registering of validators
147 SessionPtr aMgr = ModelAPI_Session::get();
148 ModelAPI_ValidatorsFactory* aFactory = aMgr->validators();
149 aFactory->registerValidator("PartSet_DistanceSelection", new PartSet_DistanceSelection);
150 aFactory->registerValidator("PartSet_LengthSelection", new PartSet_LengthSelection);
151 aFactory->registerValidator("PartSet_PerpendicularSelection", new PartSet_PerpendicularSelection);
152 aFactory->registerValidator("PartSet_ParallelSelection", new PartSet_ParallelSelection);
153 aFactory->registerValidator("PartSet_RadiusSelection", new PartSet_RadiusSelection);
154 aFactory->registerValidator("PartSet_RigidSelection", new PartSet_RigidSelection);
155 aFactory->registerValidator("PartSet_CoincidentSelection", new PartSet_CoincidentSelection);
156 aFactory->registerValidator("PartSet_HVDirSelection", new PartSet_HVDirSelection);
157 aFactory->registerValidator("PartSet_TangentSelection", new PartSet_TangentSelection);
158 aFactory->registerValidator("PartSet_FilletSelection", new PartSet_FilletSelection);
160 aFactory->registerValidator("PartSet_DifferentObjects", new PartSet_DifferentObjectsValidator);
161 aFactory->registerValidator("PartSet_DifferentShapes", new ModelAPI_ShapeValidator);
163 aFactory->registerValidator("GeomValidators_ShapeType", new GeomValidators_ShapeType);
164 aFactory->registerValidator("GeomValidators_Face", new GeomValidators_Face);
166 aFactory->registerValidator("GeomValidators_ConstructionComposite",
167 new GeomValidators_ConstructionComposite);
169 aFactory->registerValidator("GeomValidators_ZeroOffset",
170 new GeomValidators_ZeroOffset);
172 aFactory->registerValidator("PartSet_SketchEntityValidator",
173 new PartSet_SketchEntityValidator);
175 aFactory->registerValidator("PartSet_SameTypeAttr",
176 new PartSet_SameTypeAttrValidator);
179 void PartSet_Module::registerFilters()
181 //Registering of selection filters
182 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
183 ModuleBase_FilterFactory* aFactory = aConnector->selectionFilters();
186 void PartSet_Module::registerProperties()
188 Config_PropManager::registerProp("Sketch planes", "planes_size", "Size", Config_Prop::Double,
190 Config_PropManager::registerProp("Sketch planes", "planes_thickness", "Thickness",
191 Config_Prop::Integer, SKETCH_WIDTH);
194 void PartSet_Module::onOperationCommitted(ModuleBase_Operation* theOperation)
196 if (PartSet_SketcherMgr::isNestedSketchOperation(theOperation)) {
197 mySketchMgr->commitNestedSketch(theOperation);
200 if (theOperation->isEditOperation())
202 // the selection is cleared after commit the create operation
203 // in order to do not use the same selected objects in the restarted operation
204 // for common behaviour, the selection is cleared even if the operation is not restarted
205 Handle(AIS_InteractiveContext) aContext = myWorkshop->viewer()->AISContext();
206 if (!aContext.IsNull())
207 aContext->ClearSelected();
209 /// Restart sketcher operations automatically
210 FeaturePtr aFeature = theOperation->feature();
211 std::shared_ptr<SketchPlugin_Feature> aSPFeature =
212 std::dynamic_pointer_cast<SketchPlugin_Feature>(aFeature);
213 if (aSPFeature && (myRestartingMode == RM_LastFeatureUsed ||
214 myRestartingMode == RM_EmptyFeatureUsed)) {
215 myLastOperationId = theOperation->id();
216 myLastFeature = myRestartingMode == RM_LastFeatureUsed ? theOperation->feature() : FeaturePtr();
218 launchOperation(myLastOperationId);
220 breakOperationSequence();
223 void PartSet_Module::breakOperationSequence()
225 myLastOperationId = "";
226 myLastFeature = FeaturePtr();
227 myRestartingMode = RM_None;
230 void PartSet_Module::onOperationAborted(ModuleBase_Operation* theOperation)
232 breakOperationSequence();
235 void PartSet_Module::sendOperation(ModuleBase_Operation* theOperation)
237 // Install the document filter before any other filter
238 if (myDocumentShapeFilter.IsNull())
239 myDocumentShapeFilter = new PartSet_GlobalFilter(myWorkshop);
240 myWorkshop->viewer()->addSelectionFilter(myDocumentShapeFilter);
242 ModuleBase_IModule::sendOperation(theOperation);
245 void PartSet_Module::onOperationStarted(ModuleBase_Operation* theOperation)
247 if (PartSet_SketcherMgr::isSketchOperation(theOperation)) {
248 Handle(V3d_Viewer) aViewer = myWorkshop->viewer()->AISContext()->CurrentViewer();
249 aViewer->AddZLayer(myVisualLayerId);
250 mySketchMgr->startSketch(theOperation);
252 else if (PartSet_SketcherMgr::isNestedSketchOperation(theOperation)) {
253 mySketchMgr->startNestedSketch(theOperation);
257 void PartSet_Module::onOperationStopped(ModuleBase_Operation* theOperation)
259 if (PartSet_SketcherMgr::isSketchOperation(theOperation)) {
260 mySketchMgr->stopSketch(theOperation);
261 Handle(V3d_Viewer) aViewer = myWorkshop->viewer()->AISContext()->CurrentViewer();
262 aViewer->RemoveZLayer(myVisualLayerId);
265 else if (PartSet_SketcherMgr::isNestedSketchOperation(theOperation)) {
266 mySketchMgr->stopNestedSketch(theOperation);
268 myWorkshop->viewer()->removeSelectionFilter(myDocumentShapeFilter);
271 ModuleBase_Operation* PartSet_Module::currentOperation() const
273 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
274 XGUI_OperationMgr* anOpMgr = aConnector->workshop()->operationMgr();
275 return anOpMgr->currentOperation();
278 bool PartSet_Module::canUndo() const
280 bool aCanUndo = false;
281 SessionPtr aMgr = ModelAPI_Session::get();
282 if (aMgr->hasModuleDocument() && aMgr->canUndo()) {
283 aCanUndo = !aMgr->isOperation();
284 if (!aCanUndo) // check the enable state additionally by sketch manager
285 aCanUndo = aMgr->canUndo();
290 bool PartSet_Module::canRedo() const
292 bool aCanRedo = false;
293 SessionPtr aMgr = ModelAPI_Session::get();
294 if (aMgr->hasModuleDocument() && aMgr->canRedo()) {
295 aCanRedo = !aMgr->isOperation();
296 if (!aCanRedo) // check the enable state additionally by sketch manager
297 aCanRedo = aMgr->canRedo();
302 bool PartSet_Module::canDisplayObject(const ObjectPtr& theObject) const
304 // the sketch manager put the restriction to the objects display
305 return mySketchMgr->canDisplayObject(theObject);
308 bool PartSet_Module::canActivateSelection(const ObjectPtr& theObject) const
310 bool aCanActivate = ModuleBase_IModule::canActivateSelection(theObject);
312 ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
313 bool isSketchOp = PartSet_SketcherMgr::isSketchOperation(anOperation),
314 isNestedOp = PartSet_SketcherMgr::isNestedSketchOperation(anOperation);
315 if (isSketchOp || isNestedOp) {
316 // in active sketch operation it is possible to activate operation object in selection
317 // in the edit operation, e.g. points of the line can be moved when the line is edited
318 aCanActivate = aCanActivate || anOperation->isEditOperation();
323 bool PartSet_Module::addViewerMenu(QMenu* theMenu, const QMap<QString, QAction*>& theStdActions) const
325 return myMenuMgr->addViewerMenu(theMenu, theStdActions);
328 void PartSet_Module::activeSelectionModes(QIntList& theModes)
331 if (mySketchMgr->activeSketch().get())
332 PartSet_SketcherMgr::sketchSelectionModes(theModes);
335 bool PartSet_Module::isMouseOverWindow()
337 return mySketchMgr->isMouseOverWindow();
340 void PartSet_Module::propertyPanelDefined(ModuleBase_Operation* theOperation)
342 ModuleBase_IPropertyPanel* aPanel = theOperation->propertyPanel();
343 if (PartSet_SketcherMgr::isSketchOperation(theOperation) && (theOperation->isEditOperation())) {
344 // we have to manually activate the sketch label in edit mode
345 aPanel->activateWidget(aPanel->modelWidgets().first());
349 // Restart last operation type
350 if ((theOperation->id() == myLastOperationId) && myLastFeature) {
351 ModuleBase_ModelWidget* aWgt = aPanel->activeWidget();
352 if (theOperation->id().toStdString() == SketchPlugin_Line::ID()) {
353 // Initialise new line with first point equal to end of previous
354 PartSet_WidgetPoint2D* aPnt2dWgt = dynamic_cast<PartSet_WidgetPoint2D*>(aWgt);
356 std::shared_ptr<ModelAPI_Data> aData = myLastFeature->data();
357 std::shared_ptr<GeomDataAPI_Point2D> aPoint =
358 std::dynamic_pointer_cast<GeomDataAPI_Point2D>(aData->attribute(SketchPlugin_Line::END_ID()));
360 aPnt2dWgt->setPoint(aPoint->x(), aPoint->y());
361 PartSet_Tools::setConstraints(mySketchMgr->activeSketch(), theOperation->feature(),
362 aWgt->attributeID(), aPoint->x(), aPoint->y());
363 aPanel->activateNextWidget(aPnt2dWgt);
368 // Start editing constraint
369 if (theOperation->isEditOperation()) {
370 // TODO: #391 - to be removed
371 std::string aId = theOperation->id().toStdString();
372 if (PartSet_SketcherMgr::isNestedSketchOperation(theOperation) &&
373 PartSet_SketcherMgr::isDistanceOperation(theOperation)) {
374 // Find and activate widget for management of point for dimension line position
375 QList<ModuleBase_ModelWidget*> aWidgets = aPanel->modelWidgets();
376 foreach (ModuleBase_ModelWidget* aWgt, aWidgets) {
377 PartSet_WidgetPoint2D* aPntWgt = dynamic_cast<PartSet_WidgetPoint2D*>(aWgt);
379 aPanel->activateWidget(aPntWgt);
389 void PartSet_Module::onSelectionChanged()
391 ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
395 bool isSketcherOp = false;
396 // An edit operation is enable only if the current opeation is the sketch operation
397 if (mySketchMgr->activeSketch()) {
398 if (PartSet_Tools::sketchPlane(mySketchMgr->activeSketch()))
399 isSketcherOp = PartSet_SketcherMgr::isSketchOperation(aOperation);
402 // Editing of constraints can be done on selection
403 ModuleBase_ISelection* aSelect = myWorkshop->selection();
404 QList<ModuleBase_ViewerPrs> aSelected = aSelect->getSelected();
405 if (aSelected.size() == 1) {
406 ModuleBase_ViewerPrs aPrs = aSelected.first();
407 ObjectPtr aObject = aPrs.object();
408 FeaturePtr aFeature = ModelAPI_Feature::feature(aObject);
410 std::string aId = aFeature->getKind();
411 if ((aId == SketchPlugin_ConstraintRadius::ID()) ||
412 (aId == SketchPlugin_ConstraintLength::ID()) ||
413 (aId == SketchPlugin_ConstraintDistance::ID())) {
414 editFeature(aFeature);
421 void PartSet_Module::onKeyRelease(ModuleBase_IViewWindow* theWnd, QKeyEvent* theEvent)
423 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
424 XGUI_OperationMgr* anOpMgr = aConnector->workshop()->operationMgr();
425 anOpMgr->onKeyReleased(theEvent);
428 void PartSet_Module::onEnterReleased()
430 myRestartingMode = RM_EmptyFeatureUsed;
433 void PartSet_Module::onOperationActivatedByPreselection()
435 ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
436 if(anOperation && PartSet_SketcherMgr::isNestedSketchOperation(anOperation)) {
437 // Set final definitions if they are necessary
438 //propertyPanelDefined(aOperation);
440 /// Commit sketcher operations automatically
441 anOperation->commit();
445 void PartSet_Module::onNoMoreWidgets()
447 ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
449 if (PartSet_SketcherMgr::isNestedSketchOperation(anOperation)) {
450 if (myRestartingMode != RM_Forbided)
451 myRestartingMode = RM_LastFeatureUsed;
452 anOperation->commit();
457 void PartSet_Module::onVertexSelected()
459 ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
460 if (aOperation->id().toStdString() == SketchPlugin_Line::ID()) {
461 /// If last line finished on vertex the lines creation sequence has to be break
462 ModuleBase_IPropertyPanel* aPanel = aOperation->propertyPanel();
463 ModuleBase_ModelWidget* anActiveWidget = aPanel->activeWidget();
464 const QList<ModuleBase_ModelWidget*>& aWidgets = aPanel->modelWidgets();
465 QList<ModuleBase_ModelWidget*>::const_iterator anIt = aWidgets.begin(), aLast = aWidgets.end();
466 bool aFoundWidget = false;
467 bool aFoundObligatory = false;
468 for (; anIt != aLast && !aFoundObligatory; anIt++) {
470 aFoundWidget = *anIt == anActiveWidget;
472 aFoundObligatory = (*anIt)->isObligatory();
474 if (!aFoundObligatory)
475 myRestartingMode = RM_Forbided;
479 ModuleBase_ModelWidget* PartSet_Module::createWidgetByType(const std::string& theType, QWidget* theParent,
480 Config_WidgetAPI* theWidgetApi, std::string theParentId)
482 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
483 XGUI_Workshop* aWorkshop = aConnector->workshop();
484 ModuleBase_ModelWidget* aWgt = NULL;
485 if (theType == "sketch-start-label") {
486 PartSet_WidgetSketchLabel* aLabelWgt = new PartSet_WidgetSketchLabel(theParent,
487 theWidgetApi, theParentId, mySketchMgr->isConstraintsShown());
488 aLabelWgt->setWorkshop(aWorkshop);
489 connect(aLabelWgt, SIGNAL(planeSelected(const std::shared_ptr<GeomAPI_Pln>&)),
490 mySketchMgr, SLOT(onPlaneSelected(const std::shared_ptr<GeomAPI_Pln>&)));
491 connect(aLabelWgt, SIGNAL(showConstraintToggled(bool)),
492 mySketchMgr, SLOT(onShowConstraintsToggle(bool)));
494 } else if (theType == "sketch-2dpoint_selector") {
495 PartSet_WidgetPoint2D* aPointWgt = new PartSet_WidgetPoint2D(theParent, theWidgetApi, theParentId);
496 aPointWgt->setWorkshop(aWorkshop);
497 aPointWgt->setSketch(mySketchMgr->activeSketch());
498 connect(aPointWgt, SIGNAL(vertexSelected()), this, SLOT(onVertexSelected()));
500 } else if (theType == "point2ddistance") {
501 PartSet_WidgetPoint2dDistance* aDistanceWgt = new PartSet_WidgetPoint2dDistance(theParent, theWidgetApi, theParentId);
502 aDistanceWgt->setWorkshop(aWorkshop);
503 aDistanceWgt->setSketch(mySketchMgr->activeSketch());
505 } else if(theType == "point2dangle") {
506 PartSet_WidgetPoint2dAngle* anAngleWgt = new PartSet_WidgetPoint2dAngle(theParent, theWidgetApi, theParentId);
507 anAngleWgt->setWorkshop(aWorkshop);
508 anAngleWgt->setSketch(mySketchMgr->activeSketch());
510 } else if (theType == "sketch_shape_selector") {
511 PartSet_WidgetShapeSelector* aShapeSelectorWgt =
512 new PartSet_WidgetShapeSelector(theParent, workshop(), theWidgetApi, theParentId);
513 aShapeSelectorWgt->setSketcher(mySketchMgr->activeSketch());
514 aWgt = aShapeSelectorWgt;
515 } else if (theType == "sketch_multi_selector") {
516 PartSet_WidgetMultiSelector* aShapeSelectorWgt =
517 new PartSet_WidgetMultiSelector(theParent, workshop(), theWidgetApi, theParentId);
518 aShapeSelectorWgt->setSketcher(mySketchMgr->activeSketch());
519 aWgt = aShapeSelectorWgt;
520 } else if (theType == WDG_DOUBLEVALUE_EDITOR) {
521 aWgt = new PartSet_WidgetEditor(theParent, workshop(), theWidgetApi, theParentId);
522 } else if (theType == "export_file_selector") {
523 aWgt = new PartSet_WidgetFileSelector(theParent, workshop(), theWidgetApi, theParentId);
524 } else if (theType == "sketch_launcher") {
525 aWgt = new PartSet_WidgetSketchCreator(theParent, this, theWidgetApi, theParentId);
531 bool PartSet_Module::deleteObjects()
533 SessionPtr aMgr = ModelAPI_Session::get();
534 // 1. check whether the delete should be processed in the module
535 ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
536 bool isSketchOp = PartSet_SketcherMgr::isSketchOperation(anOperation),
537 isNestedOp = PartSet_SketcherMgr::isNestedSketchOperation(anOperation);
538 if (isSketchOp || isNestedOp) {
539 // 2. find selected presentations
540 // selected objects should be collected before the current operation abort because
541 // the abort leads to selection lost on constraint objects. It can be corrected after #386 issue
542 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
543 XGUI_Workshop* aWorkshop = aConnector->workshop();
544 ModuleBase_ISelection* aSel = workshop()->selection();
545 QObjectPtrList aSelectedObj = aSel->selectedPresentations();
546 // if there are no selected objects in the viewer, that means that the selection in another
547 // place cased this method. It is necessary to return the false value to understande in above
548 // method that delete is not processed
549 if (aSelectedObj.count() == 0)
552 // avoid delete of the objects, which are not belong to the current sketch
553 // in order to do not delete results of other sketches
554 QObjectPtrList aSketchObjects;
555 QObjectPtrList::const_iterator anIt = aSelectedObj.begin(), aLast = aSelectedObj.end();
556 for ( ; anIt != aLast; anIt++) {
557 ObjectPtr anObject = *anIt;
558 if (mySketchMgr->isObjectOfSketch(anObject)) {
559 // sketch feature should be used in this list because workshop deletes features only
560 // results are skipped
561 FeaturePtr aSketchFeature = ModelAPI_Feature::feature(anObject);
562 aSketchObjects.append(aSketchFeature);
565 // if the selection contains only local selected presentations from other sketches,
566 // the Delete operation should not be done at all
567 if (aSketchObjects.size() == 0)
570 // the active nested sketch operation should be aborted unconditionally
572 anOperation->abort();
574 // 3. start operation
575 QString aDescription = aWorkshop->contextMenuMgr()->action("DELETE_CMD")->text();
576 aMgr->startOperation(aDescription.toStdString());
578 // 4. delete features
579 // sketch feature should be skipped, only sub-features can be removed
580 // when sketch operation is active
581 std::set<FeaturePtr> anIgnoredFeatures;
582 anIgnoredFeatures.insert(mySketchMgr->activeSketch());
583 aWorkshop->deleteFeatures(aSketchObjects, anIgnoredFeatures);
586 aWorkshop->displayer()->updateViewer();
587 aMgr->finishOperation();
589 bool isPartRemoved = false;
590 // Delete part with help of PartSet plugin
591 // TODO: the deleted objects has to be processed by multiselection
592 QObjectPtrList aObjects = myWorkshop->selection()->selectedObjects();
593 if (aObjects.size() == 1) {
594 ObjectPtr aObj = aObjects.first();
595 FeaturePtr aFeature = std::dynamic_pointer_cast<ModelAPI_Feature>(aObj);
596 if (aFeature.get() && (aFeature->getKind() == PartSetPlugin_Part::ID())) {
597 // Remove feature should be created in the document of the part results
598 ResultPtr aPartResult = aFeature->firstResult();
599 if (aPartResult.get()) {
600 std::shared_ptr<ModelAPI_ResultPart> aPart =
601 std::dynamic_pointer_cast<ModelAPI_ResultPart>(aPartResult);
602 DocumentPtr aPartDoc = aPart->partDoc();
603 if (aPartDoc.get()) {
604 aMgr->startOperation(PartSetPlugin_Remove::ID());
605 FeaturePtr aFeature = aPartDoc->addFeature(PartSetPlugin_Remove::ID());
607 aMgr->finishOperation();
608 isPartRemoved = true;
613 return isPartRemoved;
618 void PartSet_Module::onFeatureTriggered()
620 SessionPtr aMgr = ModelAPI_Session::get();
621 // 1. check whether the delete should be processed in the module
622 ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
623 bool isNestedOp = PartSet_SketcherMgr::isNestedCreateOperation(anOperation);
625 // in case if in the viewer nothing is displayed, the create operation should not be
626 // comitted even if all values of the feature are initialized
627 if (!mySketchMgr->canDisplayCurrentCreatedFeature()) {
628 QAction* aCmd = dynamic_cast<QAction*>(sender());
629 //Do nothing on uncheck
630 if (aCmd->isCheckable() && !aCmd->isChecked())
633 // the action information should be saved before the operation is aborted
634 // because this abort leads to update command status, which unchecks this action
635 anOperation->abort();
637 launchOperation(aCmd->data().toString());
640 ModuleBase_IModule::onFeatureTriggered();
643 void PartSet_Module::onObjectDisplayed(ObjectPtr theObject, AISObjectPtr theAIS)
645 Handle(AIS_InteractiveObject) anAIS = theAIS->impl<Handle(AIS_InteractiveObject)>();
646 if (!anAIS.IsNull()) {
647 Handle(AIS_InteractiveContext) aCtx = anAIS->GetContext();
648 Handle(AIS_Dimension) aDim = Handle(AIS_Dimension)::DownCast(anAIS);
649 if (!aDim.IsNull()) {
650 aCtx->SetZLayer(aDim, myVisualLayerId);
652 Handle(SketcherPrs_SymbolPrs) aCons = Handle(SketcherPrs_SymbolPrs)::DownCast(anAIS);
654 aCtx->SetZLayer(aCons, myVisualLayerId);
659 void PartSet_Module::onViewTransformed(int theTrsfType)
661 // Set length of arrows constant in pixel size
662 // if the operation is panning or rotate or panglobal then do nothing
663 if ((theTrsfType == 1) || (theTrsfType == 3) || (theTrsfType == 4))
666 ModuleBase_IViewer* aViewer = myWorkshop->viewer();
667 //Handle(V3d_View) aView = aViewer->activeView();
669 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(myWorkshop);
670 XGUI_Workshop* aWorkshop = aConnector->workshop();
671 XGUI_Displayer* aDisplayer = aWorkshop->displayer();
672 Handle(AIS_InteractiveContext) aContext = aViewer->AISContext();
674 Handle(V3d_Viewer) aV3dViewer = aContext->CurrentViewer();
675 Handle(V3d_View) aView;
677 for (aV3dViewer->InitDefinedViews();
678 aV3dViewer->MoreDefinedViews();
679 aV3dViewer->NextDefinedViews()) {
680 Handle(V3d_View) aV = aV3dViewer->DefinedView();
681 double aS = aV->Scale();
689 double aLen = aView->Convert(20);
691 double aPrevLen = SketcherPrs_Tools::getArrowSize();
692 SketcherPrs_Tools::setArrowSize(aLen);
693 const double aPrevScale = aViewer->Scale(aViewer->activeView());
694 const double aCurScale = aViewer->activeView()->Camera()->Scale();
695 aViewer->SetScale(aViewer->activeView(), aCurScale);
696 SketcherPrs_Tools::setTextHeight (aCurScale / aPrevScale * SketcherPrs_Tools::getTextHeight());
697 bool isModified = false;
698 QList<AISObjectPtr> aPrsList = aDisplayer->displayedPresentations();
699 foreach (AISObjectPtr aAIS, aPrsList) {
700 Handle(AIS_InteractiveObject) aAisObj = aAIS->impl<Handle(AIS_InteractiveObject)>();
702 Handle(AIS_Dimension) aDim = Handle(AIS_Dimension)::DownCast(aAisObj);
703 if (!aDim.IsNull()) {
704 aDim->DimensionAspect()->ArrowAspect()->SetLength(aLen);
705 aContext->Redisplay(aDim, false);
710 aDisplayer->updateViewer();
714 void PartSet_Module::customizeObjectBrowser(QWidget* theObjectBrowser)
716 XGUI_ObjectsBrowser* aOB = dynamic_cast<XGUI_ObjectsBrowser*>(theObjectBrowser);
718 QLineEdit* aLabel = aOB->activeDocLabel();
719 QPalette aPalet = aLabel->palette();
720 aPalet.setColor(QPalette::Text, QColor(0, 72, 140));
721 aLabel->setPalette(aPalet);
722 aOB->treeView()->setExpandsOnDoubleClick(false);
723 connect(aOB->treeView(), SIGNAL(doubleClicked(const QModelIndex&)),
724 SLOT(onTreeViewDoubleClick(const QModelIndex&)));
725 connect(aOB, SIGNAL(headerMouseDblClicked(const QModelIndex&)),
726 SLOT(onTreeViewDoubleClick(const QModelIndex&)));
727 connect(aOB->treeView(), SIGNAL(doubleClicked(const QModelIndex&)),
728 myDataModel, SLOT(onMouseDoubleClick(const QModelIndex&)));
733 void PartSet_Module::addObjectBrowserMenu(QMenu* theMenu) const
735 QObjectPtrList aObjects = myWorkshop->selection()->selectedObjects();
736 int aSelected = aObjects.size();
737 SessionPtr aMgr = ModelAPI_Session::get();
738 if (aSelected == 1) {
739 bool hasResult = false;
740 bool hasFeature = false;
741 bool hasParameter = false;
742 ModuleBase_Tools::checkObjects(aObjects, hasResult, hasFeature, hasParameter);
744 ObjectPtr aObject = aObjects.first();
746 ResultPartPtr aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aObject);
747 FeaturePtr aPartFeature = std::dynamic_pointer_cast<ModelAPI_Feature>(aObject);
748 bool isPart = aPart.get() ||
749 (aPartFeature.get() && (aPartFeature->getKind() == PartSetPlugin_Part::ID()));
751 DocumentPtr aPartDoc;
753 aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aPartFeature->firstResult());
755 if (aPart.get()) // this may be null is Part feature is disabled
756 aPartDoc = aPart->partDoc();
757 if (aMgr->activeDocument() == aPartDoc)
758 theMenu->addAction(myMenuMgr->action("DEACTIVATE_PART_CMD"));
760 theMenu->addAction(myMenuMgr->action("ACTIVATE_PART_CMD"));
761 } else if (aObject->document() == aMgr->activeDocument()) {
762 if (hasParameter || hasFeature)
763 theMenu->addAction(myMenuMgr->action("EDIT_CMD"));
765 } else { // If feature is 0 the it means that selected root object (document)
766 if (aMgr->activeDocument() != aMgr->moduleDocument())
767 theMenu->addAction(myMenuMgr->action("ACTIVATE_PARTSET_CMD"));
769 } else if (aSelected == 0) {
770 // if there is no selection then it means that upper label is selected
771 QModelIndexList aIndexes = myWorkshop->selection()->selectedIndexes();
772 if (aIndexes.size() == 0) // it means that selection happens in top label outside of tree view
773 if (aMgr->activeDocument() != aMgr->moduleDocument())
774 theMenu->addAction(myMenuMgr->action("ACTIVATE_PARTSET_CMD"));
778 void PartSet_Module::processEvent(const std::shared_ptr<Events_Message>& theMessage)
780 if (theMessage->eventID() == Events_Loop::loop()->eventByName(EVENT_DOCUMENT_CHANGED)) {
781 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(myWorkshop);
782 XGUI_Workshop* aWorkshop = aConnector->workshop();
783 XGUI_DataTree* aTreeView = aWorkshop->objectBrowser()->treeView();
784 QLineEdit* aLabel = aWorkshop->objectBrowser()->activeDocLabel();
785 QPalette aPalet = aLabel->palette();
787 SessionPtr aMgr = ModelAPI_Session::get();
788 DocumentPtr aActiveDoc = aMgr->activeDocument();
789 DocumentPtr aDoc = aMgr->moduleDocument();
790 QModelIndex aOldIndex = myDataModel->activePartTree();
791 if (aActiveDoc == aDoc) {
792 if (aOldIndex.isValid())
793 aTreeView->setExpanded(aOldIndex, false);
794 myDataModel->deactivatePart();
795 aPalet.setColor(QPalette::Text, QColor(0, 72, 140));
797 std::string aGrpName = ModelAPI_ResultPart::group();
798 for (int i = 0; i < aDoc->size(aGrpName); i++) {
799 ResultPartPtr aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aDoc->object(aGrpName, i));
800 if (aPart->partDoc() == aActiveDoc) {
801 QModelIndex aIndex = myDataModel->partIndex(aPart);
802 if (myDataModel->activatePart(aIndex)) {
803 if (aOldIndex.isValid())
804 aTreeView->setExpanded(aOldIndex, false);
805 aTreeView->setExpanded(myDataModel->activePartTree(), true);
806 aPalet.setColor(QPalette::Text, Qt::black);
812 aLabel->setPalette(aPalet);
813 aWorkshop->updateCommandStatus();
815 // Update displayed objects in order to update active color
816 XGUI_Displayer* aDisplayer = aWorkshop->displayer();
817 QObjectPtrList aObjects = aDisplayer->displayedObjects();
818 foreach(ObjectPtr aObj, aObjects)
819 aDisplayer->redisplay(aObj, false);
820 aDisplayer->updateViewer();
824 void PartSet_Module::onTreeViewDoubleClick(const QModelIndex& theIndex)
826 SessionPtr aMgr = ModelAPI_Session::get();
827 if (!theIndex.isValid()) {
828 aMgr->setActiveDocument(aMgr->moduleDocument());
831 if (theIndex.column() != 0) // Use only first column
833 ObjectPtr aObj = myDataModel->object(theIndex);
834 ResultPartPtr aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aObj);
835 if (!aPart.get()) { // Probably this is Feature
836 FeaturePtr aPartFeature = std::dynamic_pointer_cast<ModelAPI_Feature>(aObj);
837 if (aPartFeature.get() && (aPartFeature->getKind() == PartSetPlugin_Part::ID())) {
838 aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aPartFeature->firstResult());
841 if (aPart.get()) { // if this is a part
842 if (aPart->partDoc() == aMgr->activeDocument()) {
843 aMgr->setActiveDocument(aMgr->moduleDocument());