1 // Copyright (C) 2014-2017 CEA/DEN, EDF R&D
3 // This library is free software; you can redistribute it and/or
4 // modify it under the terms of the GNU Lesser General Public
5 // License as published by the Free Software Foundation; either
6 // version 2.1 of the License, or (at your option) any later version.
8 // This library is distributed in the hope that it will be useful,
9 // but WITHOUT ANY WARRANTY; without even the implied warranty of
10 // MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
11 // Lesser General Public License for more details.
13 // You should have received a copy of the GNU Lesser General Public
14 // License along with this library; if not, write to the Free Software
15 // Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
17 // See http://www.salome-platform.org/ or
18 // email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
21 #include "PartSet_Module.h"
22 #include "PartSet_WidgetSketchLabel.h"
23 #include "PartSet_Validators.h"
24 #include "PartSet_Tools.h"
25 #include "PartSet_PreviewPlanes.h"
26 #include "PartSet_WidgetPoint2d.h"
27 #include "PartSet_WidgetPoint2DFlyout.h"
28 #include "PartSet_WidgetShapeSelector.h"
29 #include "PartSet_WidgetMultiSelector.h"
30 #include "PartSet_WidgetFeaturePointSelector.h"
31 #include "PartSet_WidgetEditor.h"
32 #include "PartSet_WidgetFileSelector.h"
33 #include "PartSet_WidgetSketchCreator.h"
34 #include "PartSet_SketcherMgr.h"
35 #include "PartSet_SketcherReentrantMgr.h"
36 #include "PartSet_ResultSketchPrs.h"
37 #include "PartSet_MenuMgr.h"
38 #include "PartSet_CustomPrs.h"
39 #include "PartSet_IconFactory.h"
40 #include "PartSet_WidgetChoice.h"
41 #include "PartSet_OverconstraintListener.h"
43 #include "PartSet_Filters.h"
44 #include "PartSet_FilterInfinite.h"
46 #include <PartSetPlugin_Remove.h>
47 #include <PartSetPlugin_Part.h>
48 #include <PartSetPlugin_Duplicate.h>
50 #include <ModuleBase_Operation.h>
51 #include <ModuleBase_OperationAction.h>
52 #include <ModuleBase_IViewer.h>
53 #include <ModuleBase_IViewWindow.h>
54 #include <ModuleBase_IPropertyPanel.h>
55 #include <ModuleBase_WidgetEditor.h>
56 #include <ModuleBase_WidgetValidated.h>
57 #include <ModuleBase_Tools.h>
58 #include <ModuleBase_OperationFeature.h>
59 #include <ModuleBase_WidgetFactory.h>
60 #include <ModuleBase_OperationDescription.h>
61 #include <ModuleBase_ViewerPrs.h>
63 #include <ModelAPI_Object.h>
64 #include <ModelAPI_Events.h>
65 #include <ModelAPI_Validator.h>
66 #include <ModelAPI_Data.h>
67 #include <ModelAPI_Session.h>
68 #include <ModelAPI_ResultBody.h>
69 #include <ModelAPI_AttributeString.h>
70 #include <ModelAPI_AttributeSelectionList.h>
71 #include <ModelAPI_Tools.h>
72 #include <ModelAPI_ResultConstruction.h>
74 #include <GeomDataAPI_Point2D.h>
75 #include <GeomDataAPI_Point.h>
76 #include <GeomDataAPI_Dir.h>
78 #include <XGUI_Displayer.h>
79 #include <XGUI_Workshop.h>
80 #include <XGUI_OperationMgr.h>
81 #include <XGUI_PropertyPanel.h>
82 #include <XGUI_ModuleConnector.h>
83 #include <XGUI_ContextMenuMgr.h>
84 #include <XGUI_Tools.h>
85 #include <XGUI_ObjectsBrowser.h>
86 #include <XGUI_SelectionMgr.h>
87 #include <XGUI_DataModel.h>
88 #include <XGUI_ErrorMgr.h>
89 #include <XGUI_CustomPrs.h>
90 #include <XGUI_SelectionMgr.h>
91 #include <XGUI_ActionsMgr.h>
93 #include <SketchPlugin_Feature.h>
94 #include <SketchPlugin_Sketch.h>
95 #include <SketchPlugin_ConstraintAngle.h>
96 #include <SketchPlugin_ConstraintLength.h>
97 #include <SketchPlugin_ConstraintDistance.h>
98 #include <SketchPlugin_ConstraintParallel.h>
99 #include <SketchPlugin_ConstraintPerpendicular.h>
100 #include <SketchPlugin_ConstraintRadius.h>
102 #include <SketcherPrs_SymbolPrs.h>
103 #include <SketcherPrs_Coincident.h>
104 #include <SketcherPrs_Tools.h>
106 #include <Events_Loop.h>
107 #include <Config_PropManager.h>
108 #include <Config_Keywords.h>
110 #include <AIS_Dimension.hxx>
111 #include <AIS_InteractiveObject.hxx>
112 #include <StdSelect_TypeOfFace.hxx>
113 #include <TopoDS_Vertex.hxx>
114 #include <TopoDS.hxx>
115 #include <TopoDS_Shape.hxx>
116 #include <BRep_Tool.hxx>
119 #include <QMouseEvent>
122 #include <QApplication>
123 #include <QMessageBox>
124 #include <QMainWindow>
128 #include <GeomAlgoAPI_FaceBuilder.h>
129 #include <GeomDataAPI_Dir.h>
131 #include <SelectMgr_ListIteratorOfListOfFilter.hxx>
137 /*!Create and return new instance of XGUI_Module*/
138 extern "C" PARTSET_EXPORT ModuleBase_IModule* createModule(ModuleBase_IWorkshop* theWshop)
140 return new PartSet_Module(theWshop);
143 PartSet_Module::PartSet_Module(ModuleBase_IWorkshop* theWshop)
144 : ModuleBase_IModule(theWshop),
146 myIsOperationIsLaunched(false)
148 new PartSet_IconFactory();
150 mySketchMgr = new PartSet_SketcherMgr(this);
151 mySketchReentrantMgr = new PartSet_SketcherReentrantMgr(theWshop);
153 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(theWshop);
154 XGUI_Workshop* aWorkshop = aConnector->workshop();
156 ModuleBase_IViewer* aViewer = theWshop->viewer();
157 connect(aViewer, SIGNAL(keyRelease(ModuleBase_IViewWindow*, QKeyEvent*)),
158 this, SLOT(onKeyRelease(ModuleBase_IViewWindow*, QKeyEvent*)));
159 connect(aViewer, SIGNAL(viewTransformed(int)),
160 SLOT(onViewTransformed(int)));
161 connect(aViewer, SIGNAL(viewCreated(ModuleBase_IViewWindow*)),
162 SLOT(onViewCreated(ModuleBase_IViewWindow*)));
163 myMenuMgr = new PartSet_MenuMgr(this);
164 myCustomPrs = new PartSet_CustomPrs(theWshop);
166 myOverconstraintListener = new PartSet_OverconstraintListener(theWshop);
168 Events_Loop* aLoop = Events_Loop::loop();
169 aLoop->registerListener(this, Events_Loop::eventByName(EVENT_DOCUMENT_CHANGED));
171 mySelectionFilters.Append(new PartSet_GlobalFilter(myWorkshop));
172 mySelectionFilters.Append(new PartSet_FilterInfinite(myWorkshop));
174 setDefaultConstraintShown();
176 Config_PropManager::registerProp("Visualization", "operation_parameter_color",
177 "Reference shape wireframe color in operation", Config_Prop::Color,
178 PartSet_CustomPrs::OPERATION_PARAMETER_COLOR());
179 Config_PropManager::registerProp("Visualization", "operation_result_color",
180 "Result shape wireframe color in operation", Config_Prop::Color,
181 PartSet_CustomPrs::OPERATION_RESULT_COLOR());
182 Config_PropManager::registerProp("Visualization", "operation_highlight_color",
183 "Multi selector item color in operation", Config_Prop::Color,
184 PartSet_CustomPrs::OPERATION_HIGHLIGHT_COLOR());
185 Config_PropManager::registerProp("Visualization", "operation_remove_feature_color",
186 "Color of removed feature in operation", Config_Prop::Color,
187 PartSet_CustomPrs::OPERATION_REMOVE_FEATURE_COLOR());
190 PartSet_Module::~PartSet_Module()
192 SelectMgr_ListIteratorOfListOfFilter aIt(mySelectionFilters);
193 for (; aIt.More(); aIt.Next()) {
194 Handle(SelectMgr_Filter) aFilter = aIt.Value();
195 if (!aFilter.IsNull())
199 delete myOverconstraintListener;
202 void PartSet_Module::activateSelectionFilters()
204 SelectMgr_ListIteratorOfListOfFilter aIt(mySelectionFilters);
205 for (; aIt.More(); aIt.Next()) {
206 Handle(SelectMgr_Filter) aFilter = aIt.Value();
207 if (!aFilter.IsNull())
208 myWorkshop->viewer()->addSelectionFilter(aFilter);
212 void PartSet_Module::deactivateSelectionFilters()
214 SelectMgr_ListIteratorOfListOfFilter aIt(mySelectionFilters);
215 for (; aIt.More(); aIt.Next()) {
216 Handle(SelectMgr_Filter) aFilter = aIt.Value();
217 if (!aFilter.IsNull())
218 myWorkshop->viewer()->removeSelectionFilter(aFilter);
222 void PartSet_Module::storeSelection()
224 // cash is used only to restore selection, so it should be filled in storeSelection and
225 // after applying immediatelly cleared in restoreSelection
226 myCurrentSelection.clear();
227 sketchMgr()->storeSelection(PartSet_SketcherMgr::ST_SelectType, myCurrentSelection);
230 void PartSet_Module::restoreSelection()
232 // cash is used only to restore selection, so it should be filled in storeSelection and
233 // after applying immediatelly cleared in restoreSelection
234 sketchMgr()->restoreSelection(myCurrentSelection);
235 myCurrentSelection.clear();
238 void PartSet_Module::registerValidators()
240 //Registering of validators
241 SessionPtr aMgr = ModelAPI_Session::get();
242 ModelAPI_ValidatorsFactory* aFactory = aMgr->validators();
243 aFactory->registerValidator("PartSet_DistanceSelection", new PartSet_DistanceSelection);
244 aFactory->registerValidator("PartSet_LengthSelection", new PartSet_LengthSelection);
245 aFactory->registerValidator("PartSet_PerpendicularSelection", new PartSet_PerpendicularSelection);
246 aFactory->registerValidator("PartSet_ParallelSelection", new PartSet_ParallelSelection);
247 aFactory->registerValidator("PartSet_RadiusSelection", new PartSet_RadiusSelection);
248 aFactory->registerValidator("PartSet_RigidSelection", new PartSet_RigidSelection);
249 aFactory->registerValidator("PartSet_CoincidentSelection", new PartSet_CoincidentSelection);
250 aFactory->registerValidator("PartSet_HVDirSelection", new PartSet_HVDirSelection);
251 aFactory->registerValidator("PartSet_TangentSelection", new PartSet_TangentSelection);
252 aFactory->registerValidator("PartSet_FilletSelection", new PartSet_FilletSelection);
253 aFactory->registerValidator("PartSet_AngleSelection", new PartSet_AngleSelection);
254 aFactory->registerValidator("PartSet_EqualSelection", new PartSet_EqualSelection);
255 aFactory->registerValidator("PartSet_CollinearSelection", new PartSet_CollinearSelection);
256 aFactory->registerValidator("PartSet_MiddlePointSelection", new PartSet_MiddlePointSelection);
257 aFactory->registerValidator("PartSet_DifferentObjects", new PartSet_DifferentObjectsValidator);
258 aFactory->registerValidator("PartSet_DifferentPoints", new PartSet_DifferentPointsValidator);
259 aFactory->registerValidator("PartSet_CoincidentAttr", new PartSet_CoincidentAttr);
260 aFactory->registerValidator("PartSet_MultyTranslationSelection",
261 new PartSet_MultyTranslationSelection);
262 aFactory->registerValidator("PartSet_SplitSelection", new PartSet_SplitSelection);
263 aFactory->registerValidator("PartSet_ProjectionSelection", new PartSet_ProjectionSelection);
266 void PartSet_Module::connectToPropertyPanel(ModuleBase_ModelWidget* theWidget,
267 const bool isToConnect)
269 mySketchMgr->connectToPropertyPanel(theWidget, isToConnect);
272 void PartSet_Module::operationCommitted(ModuleBase_Operation* theOperation)
274 if (sketchMgr()->isNestedSketchOperation(theOperation)) {
275 mySketchMgr->commitNestedSketch(theOperation);
277 /// deactivate of overconstraint listener should be performed after Sketch commit (#2176)
278 if (PartSet_SketcherMgr::isSketchOperation(theOperation))
279 overconstraintListener()->setActive(false);
281 /// Restart sketcher operations automatically
282 if (!mySketchReentrantMgr->operationCommitted(theOperation)) {
284 ModuleBase_OperationFeature* aFOperation =
285 dynamic_cast<ModuleBase_OperationFeature*>(theOperation);
286 if (aFOperation && !aFOperation->isEditOperation()) {
287 // the selection is cleared after commit the create operation
288 // in order to do not use the same selected objects in the restarted operation
289 // for common behaviour, the selection is cleared even if the operation is not restarted
290 getWorkshop()->selector()->clearSelection();
295 void PartSet_Module::operationAborted(ModuleBase_Operation* theOperation)
297 /// Restart sketcher operations automatically
298 mySketchReentrantMgr->operationAborted(theOperation);
299 /// deactivate of overconstraint listener should be performed after Sketch abort (#2176)
300 if (PartSet_SketcherMgr::isSketchOperation(theOperation))
301 overconstraintListener()->setActive(false);
304 void PartSet_Module::operationStarted(ModuleBase_Operation* theOperation)
306 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>
309 XGUI_Workshop* aWorkshop = XGUI_Tools::workshop(workshop());
310 XGUI_PropertyPanel* aPropertyPanel = aWorkshop->propertyPanel();
312 ModuleBase_ModelWidget* aFilledWidget = 0;
313 bool aPostonedWidgetActivation = false;
315 FeaturePtr aFeature = aFOperation->feature();
316 /// Restart sketcher operations automatically
317 /// it is important to call method of sketch reentrant manager before filling of PP
318 /// because it fills some created feature attributes, these new values should be used
319 /// to fill the property panel
320 mySketchReentrantMgr->operationStarted(theOperation);
322 aWorkshop->fillPropertyPanel(aFOperation);
323 // filling the operation values by the current selection
324 // if the operation can be committed after the controls filling, the method perform should
325 // be stopped. Otherwise unnecessary presentations can be shown(e.g. operation prs in sketch)
326 bool isOperationCommitted = false;
327 if (!aFOperation->isEditOperation()) {
328 std::string aGreedAttributeId = ModuleBase_Tools::findGreedAttribute(workshop(), aFeature);
329 // if there is a greed attribute, automatic commit by preselection
330 // for this feature is prohibited
331 aFilledWidget = aFOperation->activateByPreselection(aGreedAttributeId);
332 if (currentOperation() != aFOperation)
333 isOperationCommitted = true;
335 if (aGreedAttributeId.empty()) {
336 // a signal should be emitted before the next widget activation
337 // because, the activation of the next widget will give a focus to the widget.
338 // As a result the value of the widget is initialized.
339 // And commit may happens until the value is entered.
341 if (mySketchReentrantMgr->canBeCommittedByPreselection())
342 isOperationCommitted = mySketchMgr->operationActivatedByPreselection();
343 // activate the next obligatory widget
344 if (!isOperationCommitted)
345 aPropertyPanel->activateNextWidget(aFilledWidget);
348 else { // there is a greed widget
349 const QList<ModuleBase_ModelWidget*>& aWidgets = aPropertyPanel->modelWidgets();
350 std::string aFirstAttributeId = aWidgets.front()->attributeID();
351 // activate next widget after greeded if it is the first widget in the panel
352 // else the first panel widget is already activated by operation start
353 if (aFirstAttributeId == aGreedAttributeId)
354 aPostonedWidgetActivation = true;
357 } if (!isOperationCommitted) {
358 aWorkshop->connectToPropertyPanel(true);
359 updateSketcherOnStart(aFOperation);
360 updatePresentationsOnStart(aFOperation);
362 // the objects of the current operation should be deactivated
363 QObjectPtrList anObjects;
364 anObjects.append(aFeature);
365 std::list<ResultPtr> aResults;
366 ModelAPI_Tools::allResults(aFeature, aResults);
367 std::list<ResultPtr>::const_iterator aIt;
368 for (aIt = aResults.begin(); aIt != aResults.end(); ++aIt) {
369 anObjects.append(*aIt);
371 QObjectPtrList::const_iterator anIt = anObjects.begin(), aLast = anObjects.end();
372 for (; anIt != aLast; anIt++)
373 aWorkshop->deactivateActiveObject(*anIt, false);
374 if (anObjects.size() > 0) {
375 XGUI_Displayer* aDisplayer = aWorkshop->displayer();
376 aDisplayer->updateViewer();
378 /// state of command actions should be updated after displayed objects modification because
379 /// deactivation(for example) of objects may influence on selection in the viewer
380 /// State of command actions may depend on selection in the viewer(e.g. Sketch)
381 workshop()->updateCommandStatus();
383 if (aPostonedWidgetActivation) {
384 // if the widget is an empty in the chain of activated widgets, the current operation
385 // is restarted. It should be performed after functionality of the operation starting
386 aPropertyPanel->activateNextWidget(aFilledWidget);
391 void PartSet_Module::updateSketcherOnStart(ModuleBase_Operation* theOperation)
393 if (PartSet_SketcherMgr::isSketchOperation(theOperation)) {
394 mySketchMgr->startSketch(theOperation);
396 else if (sketchMgr()->isNestedSketchOperation(theOperation)) {
397 mySketchMgr->startNestedSketch(theOperation);
401 void PartSet_Module::updatePresentationsOnStart(ModuleBase_Operation* theOperation)
403 ModuleBase_OperationFeature* aFOperation =
404 dynamic_cast<ModuleBase_OperationFeature*>(theOperation);
406 myCustomPrs->activate(aFOperation->feature(), ModuleBase_IModule::CustomizeArguments, true);
407 myCustomPrs->activate(aFOperation->feature(), ModuleBase_IModule::CustomizeResults, true);
411 void PartSet_Module::operationResumed(ModuleBase_Operation* theOperation)
413 ModuleBase_IModule::operationResumed(theOperation);
415 ModuleBase_OperationFeature* aFOperation =
416 dynamic_cast<ModuleBase_OperationFeature*>(theOperation);
418 myCustomPrs->activate(aFOperation->feature(), ModuleBase_IModule::CustomizeArguments, true);
419 myCustomPrs->activate(aFOperation->feature(), ModuleBase_IModule::CustomizeResults, true);
423 void PartSet_Module::operationStopped(ModuleBase_Operation* theOperation)
425 bool isModifiedArgs = myCustomPrs->deactivate(ModuleBase_IModule::CustomizeArguments, false);
426 bool isModifiedResults = myCustomPrs->deactivate(ModuleBase_IModule::CustomizeResults, false);
427 bool isModified = isModifiedArgs || isModifiedResults;
429 if (sketchMgr()->isNestedSketchOperation(theOperation)) {
430 mySketchMgr->stopNestedSketch(theOperation);
432 else if (PartSet_SketcherMgr::isSketchOperation(theOperation))
433 setDefaultConstraintShown();
435 //VSV: Viewer is updated on feature update and redisplay
437 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(myWorkshop);
438 XGUI_Displayer* aDisplayer = aConnector->workshop()->displayer();
439 aDisplayer->updateViewer();
442 QMap<PartSet_Tools::ConstraintVisibleState, bool>::const_iterator
443 anIt = myHasConstraintShown.begin(), aLast = myHasConstraintShown.end();
444 for (; anIt != aLast; anIt++) {
445 mySketchMgr->updateBySketchParameters(anIt.key(), anIt.value());
449 ModuleBase_Operation* PartSet_Module::currentOperation() const
451 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
452 XGUI_OperationMgr* anOpMgr = aConnector->workshop()->operationMgr();
453 return anOpMgr->currentOperation();
456 bool PartSet_Module::canUndo() const
458 bool aCanUndo = false;
459 SessionPtr aMgr = ModelAPI_Session::get();
460 if (aMgr->hasModuleDocument() && aMgr->canUndo()) {
461 aCanUndo = !aMgr->isOperation();
462 if (!aCanUndo) // check the enable state additionally by sketch manager
463 aCanUndo = aMgr->canUndo();
468 bool PartSet_Module::canRedo() const
470 bool aCanRedo = false;
471 SessionPtr aMgr = ModelAPI_Session::get();
472 if (aMgr->hasModuleDocument() && aMgr->canRedo()) {
473 aCanRedo = !aMgr->isOperation();
474 if (!aCanRedo) // check the enable state additionally by sketch manager
475 aCanRedo = aMgr->canRedo();
480 bool PartSet_Module::canApplyAction(const ObjectPtr& theObject, const QString& theActionId) const
483 if (theActionId == "MOVE_CMD") {
484 FeaturePtr aFeature = ModelAPI_Feature::feature(theObject);
486 ResultPtr aResult = ModuleBase_Tools::firstResult(aFeature);
487 // part features can not be moved in the history.
488 if (aResult.get() && aResult->groupName() == ModelAPI_ResultPart::group())
495 bool PartSet_Module::canEraseObject(const ObjectPtr& theObject) const
497 // the sketch manager put the restriction to the objects erase
498 return mySketchMgr->canEraseObject(theObject);
501 bool PartSet_Module::canDisplayObject(const ObjectPtr& theObject) const
503 // the sketch manager put the restriction to the objects display
504 return mySketchMgr->canDisplayObject(theObject);
507 bool PartSet_Module::canUsePreselection(const QString& thePreviousOperationKind,
508 const QString& theStartedOperationKind)
510 if (ModuleBase_IModule::canUsePreselection(thePreviousOperationKind, theStartedOperationKind))
513 return mySketchMgr->isNestedSketchFeature(theStartedOperationKind);
516 /*void PartSet_Module::processHiddenObject(const std::list<ObjectPtr>& theObjects)
518 mySketchMgr->processHiddenObject(theObjects);
521 bool PartSet_Module::canActivateSelection(const ObjectPtr& theObject) const
523 bool aCanActivate = ModuleBase_IModule::canActivateSelection(theObject);
525 ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
526 bool isSketchOp = PartSet_SketcherMgr::isSketchOperation(anOperation),
527 isNestedOp = sketchMgr()->isNestedSketchOperation(anOperation);
528 if (isSketchOp || isNestedOp) {
529 // in active sketch operation it is possible to activate operation object in selection
530 // in the edit operation, e.g. points of the line can be moved when the line is edited
531 ModuleBase_OperationFeature* aFOperation =
532 dynamic_cast<ModuleBase_OperationFeature*>(anOperation);
533 aCanActivate = aCanActivate || (aFOperation && aFOperation->isEditOperation());
538 bool PartSet_Module::addViewerMenu(const QMap<QString, QAction*>& theStdActions,
540 QMap<int, QAction*>& theMenuActions) const
542 return myMenuMgr->addViewerMenu(theStdActions, theParent, theMenuActions);
545 void PartSet_Module::updateViewerMenu(const QMap<QString, QAction*>& theStdActions)
547 myMenuMgr->updateViewerMenu(theStdActions);
550 bool PartSet_Module::isActionEnableStateFixed(const int theActionId) const
552 bool isEnabledFixed = false;
553 if (theActionId == XGUI_ActionsMgr::AcceptAll &&
554 mySketchReentrantMgr->isInternalEditActive())
555 isEnabledFixed = true;
556 return isEnabledFixed;
559 QString PartSet_Module::getFeatureError(const FeaturePtr& theFeature)
561 QString anError = ModuleBase_IModule::getFeatureError(theFeature);
562 if (anError.isEmpty())
563 anError = sketchMgr()->getFeatureError(theFeature);
568 void PartSet_Module::grantedOperationIds(ModuleBase_Operation* theOperation,
569 QStringList& theIds) const
571 myMenuMgr->grantedOperationIds(theOperation, theIds);
573 if (PartSet_SketcherMgr::isSketchOperation(theOperation)) {
574 XGUI_Workshop* aWorkshop = getWorkshop();
575 theIds.append(aWorkshop->contextMenuMgr()->action("DELETE_CMD")->text());
579 void PartSet_Module::activeSelectionModes(QIntList& theModes)
582 if (mySketchMgr->activeSketch().get())
583 PartSet_SketcherMgr::sketchSelectionModes(theModes);
586 void PartSet_Module::customSubShapesSelectionModes(QIntList& theTypes)
588 if (theTypes.contains(TopAbs_FACE))
589 theTypes.append(SketcherPrs_Tools::Sel_Sketch_Face);
590 if (theTypes.contains(TopAbs_WIRE))
591 theTypes.append(SketcherPrs_Tools::Sel_Sketch_Wire);
594 void PartSet_Module::getGeomSelection(const std::shared_ptr<ModuleBase_ViewerPrs>& theSelected,
595 ObjectPtr& theObject, AttributePtr& theAttribute)
597 ObjectPtr anObject = theSelected->object();
598 GeomShapePtr aShape = theSelected->shape();
600 theAttribute = findAttribute(anObject, aShape);
601 // TODO: try to create result if object is an external object
602 theObject = anObject;
605 bool PartSet_Module::isMouseOverWindow()
607 return mySketchMgr->isMouseOverWindow();
610 bool PartSet_Module::isSketchNeutralPointActivated() const
612 bool isNeutralPoint = true;
613 if (sketchReentranceMgr()->isInternalEditActive())
614 isNeutralPoint = false;
615 if (myIsOperationIsLaunched)
616 isNeutralPoint = false;
618 return isNeutralPoint;
621 void PartSet_Module::closeDocument()
623 myActivePartIndex = QModelIndex();
627 void PartSet_Module::clearViewer()
629 myCustomPrs->clearPrs();
631 XGUI_Workshop* aWorkshop = getWorkshop();
632 XGUI_Displayer* aDisplayer = aWorkshop->displayer();
633 aDisplayer->deactivateSelectionFilters();
636 void PartSet_Module::propertyPanelDefined(ModuleBase_Operation* theOperation)
638 ModuleBase_OperationFeature* aFOperation =
639 dynamic_cast<ModuleBase_OperationFeature*>(theOperation);
643 ModuleBase_IPropertyPanel* aPanel = aFOperation->propertyPanel();
644 // we have to manually activate the sketch label in edit mode
645 if (PartSet_SketcherMgr::isSketchOperation(aFOperation) && (aFOperation->isEditOperation()))
646 aPanel->activateWidget(aPanel->modelWidgets().first());
649 bool PartSet_Module::createWidgets(ModuleBase_Operation* theOperation,
650 QList<ModuleBase_ModelWidget*>& theWidgets) const
652 bool aProcessed = false;
654 ModuleBase_OperationFeature* aFOperation =
655 dynamic_cast<ModuleBase_OperationFeature*>(theOperation);
656 XGUI_Workshop* aWorkshop = getWorkshop();
657 XGUI_PropertyPanel* aPropertyPanel = aWorkshop->propertyPanel();
658 if (mySketchMgr->activeSketch().get() && aFOperation && aPropertyPanel) {
659 ModuleBase_ISelection* aSelection = workshop()->selection();
660 // click on a point in sketch leads here with the point is highlighted, not yet selected
661 QList<ModuleBase_ViewerPrsPtr> aPreselection = aSelection->getHighlighted();
662 if (aPreselection.size() == 1) {
663 ModuleBase_ViewerPrsPtr aSelectedPrs = aPreselection[0];
664 ObjectPtr anObject = aSelectedPrs->object();
666 FeaturePtr aFeature = ModelAPI_Feature::feature(anObject);
667 FeaturePtr anOpFeature = aFOperation->feature();
668 GeomShapePtr aShape = aSelectedPrs->shape();
669 // click on the digit of dimension constrain comes here
670 // with an empty shape, so we need the check
671 if (aFeature == anOpFeature && aShape.get() && !aShape->isNull()) {
672 // if feature has only one result and shape of result is equal to selected shape
673 // this attribute is not processed. It is a case of Sketch Point.
674 if (aFeature->results().size() == 1) {
675 ResultPtr aResult = aFeature->results().front();
676 if (aResult.get() && aResult->shape()->isEqual(aShape))
679 const TopoDS_Shape& aTDShape = aShape->impl<TopoDS_Shape>();
680 AttributePtr anAttribute = PartSet_Tools::findAttributeBy2dPoint(anObject, aTDShape,
681 mySketchMgr->activeSketch());
682 if (anAttribute.get()) {
683 QString aXmlRepr = aFOperation->getDescription()->xmlRepresentation();
684 ModuleBase_WidgetFactory aFactory(aXmlRepr.toStdString(), workshop());
686 const std::string anAttributeId = anAttribute->id();
687 aFactory.createWidget(aPropertyPanel->contentWidget(), anAttributeId);
689 theWidgets = aFactory.getModelWidgets();
690 // it is possible that the point does not present in XML definition,
691 // in this case, we assume that it is not processed by this module
692 // e.g. "Intersection point" feature
693 aProcessed = !theWidgets.isEmpty();
701 void PartSet_Module::onSelectionChanged()
703 ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
707 bool isSketcherOp = false;
708 // An edit operation is enable only if the current opeation is the sketch operation
709 if (mySketchMgr->activeSketch()) {
710 if (PartSet_Tools::sketchPlane(mySketchMgr->activeSketch()))
711 isSketcherOp = PartSet_SketcherMgr::isSketchOperation(aOperation);
714 // Editing of constraints can be done on selection
715 ModuleBase_ISelection* aSelect = myWorkshop->selection();
716 QList<ModuleBase_ViewerPrsPtr> aSelected = aSelect->getSelected();
717 if (aSelected.size() == 1) {
718 ModuleBase_ViewerPrsPtr aPrs = aSelected.first();
719 ObjectPtr aObject = aPrs->object();
720 FeaturePtr aFeature = ModelAPI_Feature::feature(aObject);
722 std::string aId = aFeature->getKind();
723 if ((aId == SketchPlugin_ConstraintRadius::ID()) ||
724 (aId == SketchPlugin_ConstraintLength::ID()) ||
725 (aId == SketchPlugin_ConstraintDistance::ID()) ||
726 (aId == SketchPlugin_ConstraintAngle::ID())) {
727 editFeature(aFeature);
734 void PartSet_Module::onKeyRelease(ModuleBase_IViewWindow* theWnd, QKeyEvent* theEvent)
736 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
737 XGUI_OperationMgr* anOpMgr = aConnector->workshop()->operationMgr();
738 anOpMgr->onKeyReleased(theWnd->viewPort(), theEvent);
741 ModuleBase_ModelWidget* PartSet_Module::createWidgetByType(const std::string& theType,
743 Config_WidgetAPI* theWidgetApi)
745 ModuleBase_IWorkshop* aWorkshop = workshop();
746 XGUI_Workshop* aXUIWorkshop = getWorkshop();
747 ModuleBase_ModelWidget* aWgt = NULL;
748 if (theType == "sketch-start-label") {
749 PartSet_WidgetSketchLabel* aLabelWgt = new PartSet_WidgetSketchLabel(theParent, aWorkshop,
750 theWidgetApi, myHasConstraintShown);
751 connect(aLabelWgt, SIGNAL(planeSelected(const std::shared_ptr<GeomAPI_Pln>&)),
752 mySketchMgr, SLOT(onPlaneSelected(const std::shared_ptr<GeomAPI_Pln>&)));
753 connect(aLabelWgt, SIGNAL(showConstraintToggled(int, bool)),
754 mySketchMgr, SLOT(onShowConstraintsToggle(int, bool)));
756 } else if (theType == "sketch-2dpoint_selector") {
757 PartSet_WidgetPoint2D* aPointWgt = new PartSet_WidgetPoint2D(theParent, aWorkshop,
759 aPointWgt->setSketch(mySketchMgr->activeSketch());
760 connect(aPointWgt, SIGNAL(vertexSelected()), sketchReentranceMgr(), SLOT(onVertexSelected()));
762 }else if (theType == "sketch-2dpoint_flyout_selector") {
763 PartSet_WidgetPoint2DFlyout* aPointWgt = new PartSet_WidgetPoint2DFlyout(theParent, aWorkshop,
765 aPointWgt->setSketch(mySketchMgr->activeSketch());
766 connect(aPointWgt, SIGNAL(vertexSelected()), sketchReentranceMgr(), SLOT(onVertexSelected()));
768 } else if (theType == "sketch_shape_selector") {
769 PartSet_WidgetShapeSelector* aShapeSelectorWgt =
770 new PartSet_WidgetShapeSelector(theParent, aWorkshop, theWidgetApi);
771 aShapeSelectorWgt->setSketcher(mySketchMgr->activeSketch());
772 aWgt = aShapeSelectorWgt;
773 } else if (theType == "sketch_multi_selector") {
774 PartSet_WidgetMultiSelector* aShapeSelectorWgt =
775 new PartSet_WidgetMultiSelector(theParent, aWorkshop, theWidgetApi);
776 aShapeSelectorWgt->setSketcher(mySketchMgr->activeSketch());
777 aWgt = aShapeSelectorWgt;
779 else if (theType == "sketch_feature_point_selector") {
780 PartSet_WidgetFeaturePointSelector* aPointSelectorWgt =
781 new PartSet_WidgetFeaturePointSelector(theParent, aWorkshop, theWidgetApi);
782 aPointSelectorWgt->setSketcher(mySketchMgr->activeSketch());
783 aWgt = aPointSelectorWgt;
785 else if (theType == WDG_DOUBLEVALUE_EDITOR) {
786 aWgt = new PartSet_WidgetEditor(theParent, aWorkshop, theWidgetApi);
787 } else if (theType == "export_file_selector") {
788 aWgt = new PartSet_WidgetFileSelector(theParent, aWorkshop, theWidgetApi);
789 } else if (theType == "sketch_launcher") {
790 aWgt = new PartSet_WidgetSketchCreator(theParent, this, theWidgetApi);
791 } else if (theType == "module_choice") {
792 aWgt = new PartSet_WidgetChoice(theParent, theWidgetApi);
793 connect(aWgt, SIGNAL(itemSelected(ModuleBase_ModelWidget*, int)),
794 this, SLOT(onChoiceChanged(ModuleBase_ModelWidget*, int)));
799 ModuleBase_ModelWidget* PartSet_Module::activeWidget() const
801 ModuleBase_ModelWidget* anActiveWidget = 0;
803 anActiveWidget = mySketchReentrantMgr->internalActiveWidget();
804 if (!anActiveWidget) {
805 ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
807 ModuleBase_IPropertyPanel* aPanel = aOperation->propertyPanel();
808 anActiveWidget = aPanel ? aPanel->activeWidget() : 0;
811 return anActiveWidget;
814 bool PartSet_Module::deleteObjects()
816 bool isProcessed = false;
818 XGUI_Workshop* aWorkshop = getWorkshop();
819 XGUI_OperationMgr* anOpMgr = aWorkshop->operationMgr();
821 //SessionPtr aMgr = ModelAPI_Session::get();
822 // 1. check whether the delete should be processed in the module
823 ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
824 bool isSketchOp = PartSet_SketcherMgr::isSketchOperation(anOperation),
825 isNestedOp = sketchMgr()->isNestedSketchOperation(anOperation);
826 if (isSketchOp || isNestedOp) {
828 // 2. find selected presentations
829 // selected objects should be collected before the current operation abort because
830 // the abort leads to selection lost on constraint objects. It can be corrected after #386 issue
831 ModuleBase_ISelection* aSel = workshop()->selection();
832 QObjectPtrList aSelectedObj = aSel->selectedPresentations();
833 // if there are no selected objects in the viewer, that means that the selection in another
834 // place cased this method. It is necessary to return the false value to understande in above
835 // method that delete is not processed
836 if (aSelectedObj.count() == 0)
839 // avoid delete of the objects, which are not belong to the current sketch
840 // in order to do not delete results of other sketches
841 QObjectPtrList aSketchObjects;
842 QObjectPtrList::const_iterator anIt = aSelectedObj.begin(), aLast = aSelectedObj.end();
843 for ( ; anIt != aLast; anIt++) {
844 ObjectPtr anObject = *anIt;
845 if (mySketchMgr->isObjectOfSketch(anObject)) {
846 // sketch feature should be used in this list because workshop deletes features only
847 // results are skipped
848 FeaturePtr aSketchFeature = ModelAPI_Feature::feature(anObject);
849 aSketchObjects.append(aSketchFeature);
852 // if the selection contains only local selected presentations from other sketches,
853 // the Delete operation should not be done at all
854 if (aSketchObjects.size() == 0)
857 // 3. start operation
858 QString aDescription = aWorkshop->contextMenuMgr()->action("DELETE_CMD")->text();
859 ModuleBase_OperationAction* anOpAction = new ModuleBase_OperationAction(aDescription, this);
861 // the active nested sketch operation should be aborted unconditionally
862 // the Delete action should be additionally granted for the Sketch operation
863 // in order to do not abort/commit it
865 if (!anOpMgr->canStartOperation(anOpAction->id(), isCommitted))
866 return true; // the objects are processed but can not be deleted
868 anOpMgr->startOperation(anOpAction);
870 // WORKAROUND, should be done to avoid viewer highlight update after deletetion of objects
871 // the problem is in AIS Dimensions recompute
872 // if a line and the dim are removed, line is the first
873 // it causes the AIS recompute, where the base line is null,
874 // the result is empty AIS in the viewer
875 XGUI_Tools::workshop(myWorkshop)->selector()->clearSelection();
877 // 4. delete features
878 // sketch feature should be skipped, only sub-features can be removed
879 // when sketch operation is active
880 aWorkshop->deleteFeatures(aSketchObjects);
882 anOpMgr->commitOperation();
887 void PartSet_Module::editFeature(FeaturePtr theFeature)
889 storeConstraintsState(theFeature->getKind());
890 ModuleBase_IModule::editFeature(theFeature);
893 bool PartSet_Module::canCommitOperation() const
898 void PartSet_Module::launchOperation(const QString& theCmdId, const bool& isStartAfterCommitOnly)
900 myIsOperationIsLaunched = true;
901 storeConstraintsState(theCmdId.toStdString());
902 updateConstraintsState(theCmdId.toStdString());
904 ModuleBase_IModule::launchOperation(theCmdId, isStartAfterCommitOnly);
906 myIsOperationIsLaunched = false;
909 void PartSet_Module::storeConstraintsState(const std::string& theFeatureKind)
911 if (myWorkshop->currentOperation() &&
912 myWorkshop->currentOperation()->id().toStdString() == SketchPlugin_Sketch::ID()) {
913 const QMap<PartSet_Tools::ConstraintVisibleState, bool>& aShownStates =
914 mySketchMgr->showConstraintStates();
915 myHasConstraintShown = aShownStates;
919 void PartSet_Module::updateConstraintsState(const std::string& theFeatureKind)
921 if (PartSet_SketcherMgr::constraintsIdList().contains(theFeatureKind.c_str()) ||
922 PartSet_SketcherMgr::replicationsIdList().contains(theFeatureKind.c_str())) {
923 // Show constraints if a constraint was anOperation
924 mySketchMgr->updateBySketchParameters(PartSet_Tools::Geometrical, true);
925 mySketchMgr->updateBySketchParameters(PartSet_Tools::Dimensional, true);
926 mySketchMgr->updateBySketchParameters(PartSet_Tools::Expressions,
927 myHasConstraintShown[PartSet_Tools::Expressions]);
931 void PartSet_Module::onObjectDisplayed(ObjectPtr theObject, AISObjectPtr theAIS)
933 Handle(AIS_InteractiveObject) anAIS = theAIS->impl<Handle(AIS_InteractiveObject)>();
934 if (!anAIS.IsNull()) {
935 Handle(AIS_InteractiveContext) aCtx = anAIS->GetContext();
936 Handle(AIS_Dimension) aDim = Handle(AIS_Dimension)::DownCast(anAIS);
937 if (!aDim.IsNull()) {
938 aCtx->SetZLayer(aDim, myVisualLayerId);
940 Handle(SketcherPrs_SymbolPrs) aCons = Handle(SketcherPrs_SymbolPrs)::DownCast(anAIS);
942 aCtx->SetZLayer(aCons, myVisualLayerId);
947 void PartSet_Module::onBeforeObjectErase(ObjectPtr theObject, AISObjectPtr theAIS)
950 // it should be recomputed in order to disappear in the viewer if the corresponded object
952 //if (myCustomPrs->isActive())
953 // myCustomPrs->redisplay(theObject, false);
956 void PartSet_Module::onViewTransformed(int theTrsfType)
958 // Set length of arrows constant in pixel size
959 // if the operation is panning or rotate or panglobal then do nothing
960 if ((theTrsfType == 1) || (theTrsfType == 3) || (theTrsfType == 4))
962 ModuleBase_IViewer* aViewer = myWorkshop->viewer();
963 Handle(AIS_InteractiveContext) aContext = aViewer->AISContext();
964 if (aContext.IsNull())
967 //Handle(V3d_View) aView = aViewer->activeView();
969 XGUI_Workshop* aWorkshop = getWorkshop();
970 XGUI_Displayer* aDisplayer = aWorkshop->displayer();
971 Handle(V3d_Viewer) aV3dViewer = aContext->CurrentViewer();
972 Handle(V3d_View) aView;
974 for (aV3dViewer->InitDefinedViews();
975 aV3dViewer->MoreDefinedViews();
976 aV3dViewer->NextDefinedViews()) {
977 Handle(V3d_View) aV = aV3dViewer->DefinedView();
978 double aS = aV->Scale();
986 double aLen = aView->Convert(SketcherPrs_Tools::getDefaultArrowSize());
988 double aPrevLen = SketcherPrs_Tools::getArrowSize();
989 SketcherPrs_Tools::setArrowSize(aLen);
990 const double aPrevScale = aViewer->Scale(aViewer->activeView());
991 const double aCurScale = aViewer->activeView()->Camera()->Scale();
992 aViewer->SetScale(aViewer->activeView(), aCurScale);
993 SketcherPrs_Tools::setTextHeight (aCurScale / aPrevScale * SketcherPrs_Tools::getTextHeight());
994 bool isModified = false;
995 QList<AISObjectPtr> aPrsList = aDisplayer->displayedPresentations();
996 foreach (AISObjectPtr aAIS, aPrsList) {
997 Handle(AIS_InteractiveObject) aAisObj = aAIS->impl<Handle(AIS_InteractiveObject)>();
999 Handle(AIS_Dimension) aDim = Handle(AIS_Dimension)::DownCast(aAisObj);
1000 if (!aDim.IsNull()) {
1001 aDim->DimensionAspect()->ArrowAspect()->SetLength(aLen);
1002 aContext->Redisplay(aDim, false);
1007 aDisplayer->updateViewer();
1010 bool PartSet_Module::isCustomPrsActivated(const ModuleBase_CustomizeFlag& theFlag) const
1012 return myCustomPrs->isActive(theFlag);
1015 void PartSet_Module::activateCustomPrs(const FeaturePtr& theFeature,
1016 const ModuleBase_CustomizeFlag& theFlag,
1017 const bool theUpdateViewer)
1019 myCustomPrs->activate(theFeature, theFlag, theUpdateViewer);
1022 void PartSet_Module::deactivateCustomPrs(const ModuleBase_CustomizeFlag& theFlag,
1023 const bool theUpdateViewer)
1025 myCustomPrs->deactivate(theFlag, theUpdateViewer);
1028 bool PartSet_Module::customisePresentation(ResultPtr theResult, AISObjectPtr thePrs,
1029 std::shared_ptr<GeomAPI_ICustomPrs> theCustomPrs)
1031 bool aCustomized = false;
1033 XGUI_Workshop* aWorkshop = getWorkshop();
1034 XGUI_Displayer* aDisplayer = aWorkshop->displayer();
1035 ObjectPtr anObject = aDisplayer->getObject(thePrs);
1039 if (!theResult.get()) {
1040 std::vector<int> aColor;
1041 XGUI_CustomPrs::getDefaultColor(anObject, true, aColor);
1042 if (!aColor.empty()) {
1043 aCustomized = thePrs->setColor(aColor[0], aColor[1], aColor[2]);
1046 // customize dimentional constrains
1047 sketchMgr()->customizePresentation(anObject);
1052 bool PartSet_Module::afterCustomisePresentation(std::shared_ptr<ModelAPI_Result> theResult,
1053 AISObjectPtr thePrs,
1054 GeomCustomPrsPtr theCustomPrs)
1056 bool aCustomized = false;
1058 XGUI_Workshop* aWorkshop = getWorkshop();
1059 XGUI_Displayer* aDisplayer = aWorkshop->displayer();
1060 ObjectPtr anObject = aDisplayer->getObject(thePrs);
1064 std::vector<int> aColor;
1065 bool aUseCustomColor = true;
1066 if (aUseCustomColor)
1067 myOverconstraintListener->getCustomColor(anObject, aColor);
1068 // customize sketch symbol presentation
1069 Handle(AIS_InteractiveObject) anAISIO = thePrs->impl<Handle(AIS_InteractiveObject)>();
1070 if (!anAISIO.IsNull()) {
1071 if (!Handle(SketcherPrs_SymbolPrs)::DownCast(anAISIO).IsNull()) {
1072 Handle(SketcherPrs_SymbolPrs) aPrs = Handle(SketcherPrs_SymbolPrs)::DownCast(anAISIO);
1073 if (!aPrs.IsNull()) {
1074 aPrs->SetCustomColor(aColor);
1077 } else if (!Handle(SketcherPrs_Coincident)::DownCast(anAISIO).IsNull()) {
1078 Handle(SketcherPrs_Coincident) aPrs = Handle(SketcherPrs_Coincident)::DownCast(anAISIO);
1079 if (!aPrs.IsNull()) {
1080 aPrs->SetCustomColor(aColor);
1085 // customize sketch dimension constraint presentation
1087 if (!aColor.empty()) { // otherwise presentation has the default color
1088 aCustomized = thePrs->setColor(aColor[0], aColor[1], aColor[2]);
1094 bool PartSet_Module::customizeObject(ObjectPtr theObject, const ModuleBase_CustomizeFlag& theFlag,
1095 const bool theUpdateViewer)
1097 bool isRedisplayed = false;
1098 if (myCustomPrs->isActive(theFlag))
1099 isRedisplayed = myCustomPrs->redisplay(theObject, theFlag, theUpdateViewer);
1101 return isRedisplayed;
1104 void PartSet_Module::customizeObjectBrowser(QWidget* theObjectBrowser)
1106 XGUI_ObjectsBrowser* aOB = dynamic_cast<XGUI_ObjectsBrowser*>(theObjectBrowser);
1108 QLabel* aLabel = aOB->activeDocLabel();
1109 aLabel->installEventFilter(myMenuMgr);
1110 connect(aLabel, SIGNAL(customContextMenuRequested(const QPoint&)),
1111 SLOT(onActiveDocPopup(const QPoint&)));
1112 aOB->treeView()->setExpandsOnDoubleClick(false);
1113 connect(aOB->treeView(), SIGNAL(doubleClicked(const QModelIndex&)),
1114 SLOT(onTreeViewDoubleClick(const QModelIndex&)));
1116 Events_Loop* aLoop = Events_Loop::loop();
1117 aLoop->registerListener(this, Events_Loop::eventByName(EVENT_OBJECT_CREATED));
1121 void PartSet_Module::onActiveDocPopup(const QPoint& thePnt)
1123 SessionPtr aMgr = ModelAPI_Session::get();
1124 QAction* aActivatePartAction = myMenuMgr->action("ACTIVATE_PARTSET_CMD");
1126 XGUI_Workshop* aWorkshop = getWorkshop();
1127 QLabel* aHeader = aWorkshop->objectBrowser()->activeDocLabel();
1129 aActivatePartAction->setEnabled((aMgr->activeDocument() != aMgr->moduleDocument()));
1132 aMenu.addAction(aActivatePartAction);
1133 aMenu.exec(aHeader->mapToGlobal(thePnt));
1136 Handle(AIS_InteractiveObject) PartSet_Module::createPresentation(const ResultPtr& theResult)
1138 return mySketchMgr->createPresentation(theResult);
1142 ObjectPtr PartSet_Module::findPresentedObject(const AISObjectPtr& theAIS) const
1145 ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
1147 /// If last line finished on vertex the lines creation sequence has to be break
1148 ModuleBase_IPropertyPanel* aPanel = aOperation->propertyPanel();
1150 ModuleBase_ModelWidget* anActiveWidget = aPanel->activeWidget();
1151 // if there is an active widget, find the presented object in it
1152 if (!anActiveWidget)
1153 anActiveWidget = aPanel->preselectionWidget();
1155 ModuleBase_WidgetValidated* aWidgetValidated = dynamic_cast<ModuleBase_WidgetValidated*>
1157 if (aWidgetValidated)
1158 anObject = aWidgetValidated->findPresentedObject(theAIS);
1164 bool PartSet_Module::canBeShaded(Handle(AIS_InteractiveObject) theAIS) const
1166 bool aCanBeShaged = true;
1168 Handle(PartSet_ResultSketchPrs) aPrs = Handle(PartSet_ResultSketchPrs)::DownCast(theAIS);
1170 aCanBeShaged = false;
1172 return aCanBeShaged;
1175 void PartSet_Module::addObjectBrowserMenu(QMenu* theMenu) const
1177 QObjectPtrList aObjects = myWorkshop->selection()->selectedObjects();
1178 int aSelected = aObjects.size();
1179 SessionPtr aMgr = ModelAPI_Session::get();
1180 QAction* aActivatePartAction = myMenuMgr->action("ACTIVATE_PART_CMD");
1182 bool hasResult = false;
1183 bool hasFeature = false;
1184 bool hasParameter = false;
1185 bool hasCompositeOwner = false;
1186 bool hasResultInHistory = false;
1187 ModuleBase_Tools::checkObjects(aObjects, hasResult, hasFeature, hasParameter,
1188 hasCompositeOwner, hasResultInHistory);
1190 ModuleBase_Operation* aCurrentOp = myWorkshop->currentOperation();
1191 if (aSelected == 1) {
1192 ObjectPtr aObject = aObjects.first();
1194 ResultPartPtr aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aObject);
1195 FeaturePtr aFeature = std::dynamic_pointer_cast<ModelAPI_Feature>(aObject);
1196 bool isPart = aPart.get() ||
1197 (aFeature.get() && (aFeature->getKind() == PartSetPlugin_Part::ID()));
1199 DocumentPtr aPartDoc;
1201 aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aFeature->firstResult());
1203 if (aPart.get()) // this may be null is Part feature is disabled
1204 aPartDoc = aPart->partDoc();
1206 theMenu->addAction(aActivatePartAction);
1207 aActivatePartAction->setEnabled((aMgr->activeDocument() != aPartDoc));
1209 } else if (aObject->document() == aMgr->activeDocument()) {
1210 if (hasParameter || hasFeature) {
1211 myMenuMgr->action("EDIT_CMD")->setEnabled(true);
1212 theMenu->addAction(myMenuMgr->action("EDIT_CMD"));
1213 if (aCurrentOp && aFeature.get()) {
1214 if (aCurrentOp->id().toStdString() == aFeature->getKind())
1215 myMenuMgr->action("EDIT_CMD")->setEnabled(false);
1222 myMenuMgr->action("EDIT_CMD")->setEnabled(aCurrentOp == 0);
1223 theMenu->addAction(myMenuMgr->action("EDIT_CMD"));
1224 theMenu->addSeparator();
1227 bool aNotDeactivate = (aCurrentOp == 0);
1228 if (!aNotDeactivate) {
1229 aActivatePartAction->setEnabled(false);
1233 #define EXPAND_PARENT(OBJ) \
1234 QModelIndex aObjIndex = aDataModel->objectIndex(OBJ); \
1235 if (aObjIndex.isValid()) { \
1236 QModelIndex aParent = aObjIndex.parent(); \
1237 int aCount = aDataModel->rowCount(aParent); \
1239 aTreeView->setExpanded(aParent, true); \
1243 void PartSet_Module::processEvent(const std::shared_ptr<Events_Message>& theMessage)
1245 if (theMessage->eventID() == Events_Loop::loop()->eventByName(EVENT_DOCUMENT_CHANGED)) {
1246 // Do not change activation of parts if an operation active
1247 static QStringList aAllowActivationList;
1248 if (aAllowActivationList.isEmpty())
1249 aAllowActivationList <<
1250 QString(PartSetPlugin_Part::ID().c_str()) <<
1251 QString(PartSetPlugin_Duplicate::ID().c_str()) <<
1252 QString(PartSetPlugin_Remove::ID().c_str());
1253 if (myWorkshop->currentOperation() &&
1254 (!aAllowActivationList.contains(myWorkshop->currentOperation()->id())))
1256 XGUI_Workshop* aWorkshop = getWorkshop();
1257 XGUI_DataTree* aTreeView = aWorkshop->objectBrowser()->treeView();
1258 QLabel* aLabel = aWorkshop->objectBrowser()->activeDocLabel();
1259 QPalette aPalet = aLabel->palette();
1261 SessionPtr aMgr = ModelAPI_Session::get();
1262 DocumentPtr aActiveDoc = aMgr->activeDocument();
1263 if (myActivePartIndex.isValid())
1264 aTreeView->setExpanded(myActivePartIndex, false);
1266 XGUI_DataModel* aDataModel = aWorkshop->objectBrowser()->dataModel();
1267 myActivePartIndex = aDataModel->documentRootIndex(aActiveDoc);
1268 bool needUpdate = false;
1269 if (myActivePartIndex.isValid()) {
1270 needUpdate = aTreeView->isExpanded(myActivePartIndex);
1272 aTreeView->setExpanded(myActivePartIndex, true);
1275 aLabel->setPalette(aPalet);
1276 aWorkshop->updateCommandStatus();
1278 // Update displayed objects in order to update active color
1279 XGUI_Displayer* aDisplayer = aWorkshop->displayer();
1280 QObjectPtrList aObjects = aDisplayer->displayedObjects();
1282 foreach(ObjectPtr aObj, aObjects) {
1283 aHidden = !aObj->data() || !aObj->data()->isValid() ||
1284 aObj->isDisabled() || (!aObj->isDisplayed());
1286 aDisplayer->redisplay(aObj, false);
1288 aDisplayer->updateViewer();
1289 // Update tree items if they are expanded
1291 aTreeView->viewport()->repaint(aTreeView->viewport()->rect());
1293 } else if (theMessage->eventID() == Events_Loop::loop()->eventByName(EVENT_OBJECT_CREATED)) {
1294 std::shared_ptr<ModelAPI_ObjectUpdatedMessage> aUpdMsg =
1295 std::dynamic_pointer_cast<ModelAPI_ObjectUpdatedMessage>(theMessage);
1296 std::set<ObjectPtr> aObjects = aUpdMsg->objects();
1298 ObjectPtr aConstrObj;
1299 ObjectPtr aResultObj;
1300 std::set<ObjectPtr>::const_iterator aIt;
1301 DocumentPtr aRootDoc = ModelAPI_Session::get()->moduleDocument();
1302 for (aIt = aObjects.begin(); aIt != aObjects.end(); ++aIt) {
1303 ObjectPtr aObject = (*aIt);
1304 if ((!aResultObj.get()) && (aObject->groupName() == ModelAPI_ResultBody::group())
1305 && (aObject->document() != aRootDoc))
1306 aResultObj = aObject;
1307 if ((!aConstrObj.get()) && (aObject->groupName() == ModelAPI_ResultConstruction::group())
1308 && (aObject->document() != aRootDoc))
1309 aConstrObj = aObject;
1310 if (aResultObj.get() && aConstrObj.get())
1314 if (aResultObj.get() || aConstrObj.get()) {
1315 XGUI_Workshop* aWorkshop = getWorkshop();
1316 XGUI_DataTree* aTreeView = aWorkshop->objectBrowser()->treeView();
1317 XGUI_DataModel* aDataModel = aWorkshop->objectBrowser()->dataModel();
1319 if (aResultObj.get()) {
1320 EXPAND_PARENT(aResultObj)
1322 if (aConstrObj.get()) {
1323 EXPAND_PARENT(aConstrObj)
1329 void PartSet_Module::onTreeViewDoubleClick(const QModelIndex& theIndex)
1331 if (myWorkshop->currentOperation()) // Do not change activation of parts if an operation active
1333 SessionPtr aMgr = ModelAPI_Session::get();
1334 if (!theIndex.isValid()) {
1335 // It seems that this code is obsolete
1336 //aMgr->setActiveDocument(aMgr->moduleDocument());
1339 if (theIndex.column() != 0) // Use only first column
1342 XGUI_Workshop* aWorkshop = getWorkshop();
1343 XGUI_DataModel* aDataModel = aWorkshop->objectBrowser()->dataModel();
1344 // De not use non editable Indexes
1345 if ((aDataModel->flags(theIndex) & Qt::ItemIsSelectable) == 0)
1347 ObjectPtr aObj = aDataModel->object(theIndex);
1349 ResultPartPtr aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aObj);
1350 if (!aPart.get()) { // Probably this is Feature
1351 FeaturePtr aPartFeature = std::dynamic_pointer_cast<ModelAPI_Feature>(aObj);
1352 if (aPartFeature.get() && (aPartFeature->getKind() == PartSetPlugin_Part::ID())) {
1353 aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aPartFeature->firstResult());
1356 if (aPart.get()) { // if this is a part
1357 if (aPart->partDoc() == aMgr->activeDocument()) {
1358 myMenuMgr->activatePartSet();
1360 myMenuMgr->activatePart(aPart);
1366 void PartSet_Module::onViewCreated(ModuleBase_IViewWindow*)
1368 // z layer is created for all started operations in order to visualize operation AIS presentation
1370 Handle(AIS_InteractiveContext) aContext = myWorkshop->viewer()->AISContext();
1371 if (aContext.IsNull())
1374 Handle(V3d_Viewer) aViewer = aContext->CurrentViewer();
1375 if (myVisualLayerId == 0) {
1376 if (myVisualLayerId == 0)
1377 aViewer->AddZLayer(myVisualLayerId);
1379 TColStd_SequenceOfInteger aZList;
1380 aViewer->GetAllZLayers(aZList);
1381 bool aFound = false;
1382 for (int i = 1; i <= aZList.Length(); i++) {
1383 if (aZList(i) == myVisualLayerId) {
1389 aViewer->AddZLayer(myVisualLayerId);
1391 // if there is an active operation with validated widget,
1392 // the filters of this widget should be activated in the created view
1393 ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
1395 ModuleBase_ModelWidget* anActiveWidget = activeWidget();
1396 if (anActiveWidget) {
1397 ModuleBase_WidgetSelector* aWSelector =
1398 dynamic_cast<ModuleBase_WidgetSelector*>(anActiveWidget);
1400 aWSelector->activateSelectionAndFilters(true);
1405 //******************************************************
1406 void PartSet_Module::widgetStateChanged(int thePreviousState)
1408 mySketchMgr->widgetStateChanged(thePreviousState);
1411 bool PartSet_Module::processEnter(const std::string& thePreviousAttributeID)
1413 return mySketchReentrantMgr->processEnter(thePreviousAttributeID);
1416 //******************************************************
1417 void PartSet_Module::beforeOperationStopped(ModuleBase_Operation* theOperation)
1419 if (PartSet_SketcherMgr::isSketchOperation(theOperation)) {
1420 mySketchMgr->stopSketch(theOperation);
1424 //******************************************************
1425 GeomShapePtr PartSet_Module::findShape(const AttributePtr& theAttribute)
1427 GeomShapePtr aGeomShape;
1429 ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
1430 if (anOperation && sketchMgr()->isNestedSketchOperation(anOperation)) {
1431 aGeomShape = PartSet_Tools::findShapeBy2DPoint(theAttribute, myWorkshop);
1436 //******************************************************
1437 AttributePtr PartSet_Module::findAttribute(const ObjectPtr& theObject,
1438 const GeomShapePtr& theGeomShape)
1440 AttributePtr anAttribute;
1441 GeomShapePtr aGeomShape = theGeomShape;
1442 if (!aGeomShape.get()) {
1443 // processing shape of result, e.g. sketch circle center is selected, this is a result
1444 // the geom shape is empty, the shape of result should be used
1445 ResultPtr aResult = std::dynamic_pointer_cast<ModelAPI_Result>(theObject);
1446 if (aResult.get()) {
1447 aGeomShape = aResult->shape();
1451 if (aGeomShape.get()) {
1452 TopoDS_Shape aTDSShape = aGeomShape->impl<TopoDS_Shape>();
1453 return PartSet_Tools::findAttributeBy2dPoint(theObject, aTDSShape,
1454 mySketchMgr->activeSketch());
1459 //******************************************************
1460 std::shared_ptr<Events_Message> PartSet_Module::reentrantMessage()
1462 return sketchReentranceMgr()->reentrantMessage();
1465 //******************************************************
1466 void PartSet_Module::setReentrantPreSelection(const std::shared_ptr<Events_Message>& theMessage)
1468 sketchReentranceMgr()->setReentrantPreSelection(theMessage);
1471 //******************************************************
1472 void PartSet_Module::onChoiceChanged(ModuleBase_ModelWidget* theWidget,
1475 PartSet_WidgetChoice* aChoiceWidget = dynamic_cast<PartSet_WidgetChoice*>(theWidget);
1479 QString aChoiceTitle = aChoiceWidget->getPropertyPanelTitle(theIndex);
1480 if (!aChoiceTitle.isEmpty()) {
1481 ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
1484 ModuleBase_IPropertyPanel* aPanel = aOperation->propertyPanel();
1486 aPanel->setWindowTitle(aChoiceTitle);
1490 //******************************************************
1491 XGUI_Workshop* PartSet_Module::getWorkshop() const
1493 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
1494 return aConnector->workshop();
1497 //******************************************************
1498 void PartSet_Module::setDefaultConstraintShown()
1500 myHasConstraintShown[PartSet_Tools::Geometrical] = true;
1501 myHasConstraintShown[PartSet_Tools::Dimensional] = true;
1502 myHasConstraintShown[PartSet_Tools::Expressions] = false;