1 // Copyright (C) 2014-20xx CEA/DEN, EDF R&D
3 #include "PartSet_Module.h"
4 #include "PartSet_WidgetSketchLabel.h"
5 #include "PartSet_Validators.h"
6 #include "PartSet_Tools.h"
7 #include "PartSet_WidgetPoint2d.h"
8 #include "PartSet_WidgetPoint2dDistance.h"
9 #include "PartSet_WidgetPoint2DFlyout.h"
10 #include "PartSet_WidgetShapeSelector.h"
11 #include "PartSet_WidgetMultiSelector.h"
12 #include "PartSet_WidgetEditor.h"
13 #include "PartSet_WidgetFileSelector.h"
14 #include "PartSet_WidgetSketchCreator.h"
15 #include "PartSet_SketcherMgr.h"
16 #include "PartSet_SketcherReetntrantMgr.h"
17 #include "PartSet_MenuMgr.h"
18 #include "PartSet_CustomPrs.h"
19 #include "PartSet_IconFactory.h"
20 #include "PartSet_WidgetChoice.h"
22 #include "PartSet_Filters.h"
23 #include "PartSet_FilterInfinite.h"
25 #include <PartSetPlugin_Remove.h>
26 #include <PartSetPlugin_Part.h>
27 #include <PartSetPlugin_Duplicate.h>
29 #include <ModuleBase_Operation.h>
30 #include <ModuleBase_OperationAction.h>
31 #include <ModuleBase_IViewer.h>
32 #include <ModuleBase_IViewWindow.h>
33 #include <ModuleBase_IPropertyPanel.h>
34 #include <ModuleBase_WidgetEditor.h>
35 #include <ModuleBase_WidgetValidated.h>
36 #include <ModuleBase_FilterFactory.h>
37 #include <ModuleBase_Tools.h>
38 #include <ModuleBase_OperationFeature.h>
40 #include <ModelAPI_Object.h>
41 #include <ModelAPI_Events.h>
42 #include <ModelAPI_Validator.h>
43 #include <ModelAPI_Data.h>
44 #include <ModelAPI_Session.h>
45 #include <ModelAPI_ResultBody.h>
46 #include <ModelAPI_AttributeString.h>
48 #include <GeomDataAPI_Point2D.h>
49 #include <GeomDataAPI_Point.h>
50 #include <GeomDataAPI_Dir.h>
52 #include <XGUI_Displayer.h>
53 #include <XGUI_Workshop.h>
54 #include <XGUI_OperationMgr.h>
55 #include <XGUI_PropertyPanel.h>
56 #include <XGUI_ModuleConnector.h>
57 #include <XGUI_ContextMenuMgr.h>
58 #include <XGUI_Tools.h>
59 #include <XGUI_ObjectsBrowser.h>
60 #include <XGUI_SelectionMgr.h>
61 #include <XGUI_DataModel.h>
62 #include <XGUI_ErrorMgr.h>
64 #include <SketchPlugin_Feature.h>
65 #include <SketchPlugin_Sketch.h>
66 #include <SketchPlugin_ConstraintAngle.h>
67 #include <SketchPlugin_ConstraintLength.h>
68 #include <SketchPlugin_ConstraintDistance.h>
69 #include <SketchPlugin_ConstraintParallel.h>
70 #include <SketchPlugin_ConstraintPerpendicular.h>
71 #include <SketchPlugin_ConstraintRadius.h>
73 #include <SketcherPrs_SymbolPrs.h>
74 #include <SketcherPrs_Tools.h>
76 #include <Events_Loop.h>
77 #include <Config_PropManager.h>
78 #include <Config_Keywords.h>
80 #include <StdSelect_TypeOfFace.hxx>
81 #include <TopoDS_Vertex.hxx>
83 #include <TopoDS_Shape.hxx>
84 #include <BRep_Tool.hxx>
85 #include <AIS_Dimension.hxx>
88 #include <QMouseEvent>
91 #include <QApplication>
92 #include <QMessageBox>
93 #include <QMainWindow>
96 #include <GeomAlgoAPI_FaceBuilder.h>
97 #include <GeomDataAPI_Dir.h>
99 #include <SelectMgr_ListIteratorOfListOfFilter.hxx>
105 /*!Create and return new instance of XGUI_Module*/
106 extern "C" PARTSET_EXPORT ModuleBase_IModule* createModule(ModuleBase_IWorkshop* theWshop)
108 return new PartSet_Module(theWshop);
111 PartSet_Module::PartSet_Module(ModuleBase_IWorkshop* theWshop)
112 : ModuleBase_IModule(theWshop),
113 myVisualLayerId(0), myHasConstraintShown(true)
115 new PartSet_IconFactory();
117 mySketchMgr = new PartSet_SketcherMgr(this);
118 mySketchReentrantMgr = new PartSet_SketcherReetntrantMgr(theWshop);
120 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(theWshop);
121 XGUI_Workshop* aWorkshop = aConnector->workshop();
123 XGUI_OperationMgr* anOpMgr = aWorkshop->operationMgr();
124 connect(anOpMgr, SIGNAL(operationActivatedByPreselection()),
125 this, SLOT(onOperationActivatedByPreselection()));
127 ModuleBase_IViewer* aViewer = theWshop->viewer();
128 connect(aViewer, SIGNAL(keyRelease(ModuleBase_IViewWindow*, QKeyEvent*)),
129 this, SLOT(onKeyRelease(ModuleBase_IViewWindow*, QKeyEvent*)));
130 connect(aViewer, SIGNAL(viewTransformed(int)),
131 SLOT(onViewTransformed(int)));
132 connect(aViewer, SIGNAL(viewCreated(ModuleBase_IViewWindow*)),
133 SLOT(onViewCreated(ModuleBase_IViewWindow*)));
135 myMenuMgr = new PartSet_MenuMgr(this);
136 myCustomPrs = new PartSet_CustomPrs(theWshop);
138 Events_Loop* aLoop = Events_Loop::loop();
139 aLoop->registerListener(this, Events_Loop::eventByName(EVENT_DOCUMENT_CHANGED));
141 mySelectionFilters.Append(new PartSet_GlobalFilter(myWorkshop));
142 mySelectionFilters.Append(new PartSet_FilterInfinite(myWorkshop));
145 PartSet_Module::~PartSet_Module()
147 SelectMgr_ListIteratorOfListOfFilter aIt(mySelectionFilters);
148 for (; aIt.More(); aIt.Next()) {
149 Handle(SelectMgr_Filter) aFilter = aIt.Value();
150 if (!aFilter.IsNull())
156 void PartSet_Module::activateSelectionFilters()
158 SelectMgr_ListIteratorOfListOfFilter aIt(mySelectionFilters);
159 for (; aIt.More(); aIt.Next()) {
160 Handle(SelectMgr_Filter) aFilter = aIt.Value();
161 if (!aFilter.IsNull())
162 myWorkshop->viewer()->addSelectionFilter(aFilter);
166 void PartSet_Module::deactivateSelectionFilters()
168 SelectMgr_ListIteratorOfListOfFilter aIt(mySelectionFilters);
169 for (; aIt.More(); aIt.Next()) {
170 Handle(SelectMgr_Filter) aFilter = aIt.Value();
171 if (!aFilter.IsNull())
172 myWorkshop->viewer()->removeSelectionFilter(aFilter);
176 void PartSet_Module::registerValidators()
178 //Registering of validators
179 SessionPtr aMgr = ModelAPI_Session::get();
180 ModelAPI_ValidatorsFactory* aFactory = aMgr->validators();
181 aFactory->registerValidator("PartSet_DistanceSelection", new PartSet_DistanceSelection);
182 aFactory->registerValidator("PartSet_LengthSelection", new PartSet_LengthSelection);
183 aFactory->registerValidator("PartSet_PerpendicularSelection", new PartSet_PerpendicularSelection);
184 aFactory->registerValidator("PartSet_ParallelSelection", new PartSet_ParallelSelection);
185 aFactory->registerValidator("PartSet_RadiusSelection", new PartSet_RadiusSelection);
186 aFactory->registerValidator("PartSet_RigidSelection", new PartSet_RigidSelection);
187 aFactory->registerValidator("PartSet_CoincidentSelection", new PartSet_CoincidentSelection);
188 aFactory->registerValidator("PartSet_HVDirSelection", new PartSet_HVDirSelection);
189 aFactory->registerValidator("PartSet_TangentSelection", new PartSet_TangentSelection);
190 aFactory->registerValidator("PartSet_FilletSelection", new PartSet_FilletSelection);
191 aFactory->registerValidator("PartSet_AngleSelection", new PartSet_AngleSelection);
192 aFactory->registerValidator("PartSet_EqualSelection", new PartSet_EqualSelection);
193 aFactory->registerValidator("PartSet_DifferentObjects", new PartSet_DifferentObjectsValidator);
194 aFactory->registerValidator("PartSet_CoincidentAttr", new PartSet_CoincidentAttr);
195 aFactory->registerValidator("PartSet_SketchEntityValidator", new PartSet_SketchEntityValidator);
198 void PartSet_Module::registerFilters()
200 //Registering of selection filters
201 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
202 ModuleBase_FilterFactory* aFactory = aConnector->selectionFilters();
205 void PartSet_Module::registerProperties()
207 Config_PropManager::registerProp("Sketch planes", "planes_size", "Size", Config_Prop::Double,
209 Config_PropManager::registerProp("Sketch planes", "planes_thickness", "Thickness",
210 Config_Prop::Integer, SKETCH_WIDTH);
211 Config_PropManager::registerProp("Sketch planes", "rotate_to_plane", "Rotate to plane when selected",
212 Config_Prop::Boolean, "false");
215 void PartSet_Module::connectToPropertyPanel(ModuleBase_ModelWidget* theWidget, const bool isToConnect)
217 mySketchMgr->connectToPropertyPanel(theWidget, isToConnect);
220 void PartSet_Module::operationCommitted(ModuleBase_Operation* theOperation)
222 if (PartSet_SketcherMgr::isNestedSketchOperation(theOperation)) {
223 mySketchMgr->commitNestedSketch(theOperation);
226 /// Restart sketcher operations automatically
227 if (!mySketchReentrantMgr->operationCommitted(theOperation)) {
229 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>(theOperation);
230 if (aFOperation && !aFOperation->isEditOperation()) {
231 // the selection is cleared after commit the create operation
232 // in order to do not use the same selected objects in the restarted operation
233 // for common behaviour, the selection is cleared even if the operation is not restarted
234 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
235 XGUI_Workshop* aWorkshop = aConnector->workshop();
236 aWorkshop->selector()->clearSelection();
241 void PartSet_Module::operationAborted(ModuleBase_Operation* theOperation)
243 /// Restart sketcher operations automatically
244 mySketchReentrantMgr->operationAborted(theOperation);
247 void PartSet_Module::operationStarted(ModuleBase_Operation* theOperation)
249 /// Restart sketcher operations automatically
250 mySketchReentrantMgr->operationStarted(theOperation);
252 if (PartSet_SketcherMgr::isSketchOperation(theOperation)) {
253 mySketchMgr->startSketch(theOperation);
255 else if (PartSet_SketcherMgr::isNestedSketchOperation(theOperation)) {
256 mySketchMgr->startNestedSketch(theOperation);
259 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>(theOperation);
261 myCustomPrs->activate(aFOperation->feature(), true);
264 void PartSet_Module::operationResumed(ModuleBase_Operation* theOperation)
266 ModuleBase_IModule::operationResumed(theOperation);
268 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>(theOperation);
270 myCustomPrs->activate(aFOperation->feature(), true);
273 void PartSet_Module::operationStopped(ModuleBase_Operation* theOperation)
275 bool isModified = myCustomPrs->deactivate(false);
277 if (PartSet_SketcherMgr::isNestedSketchOperation(theOperation)) {
278 mySketchMgr->stopNestedSketch(theOperation);
281 //VSV: Viewer is updated on feature update and redisplay
283 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(myWorkshop);
284 XGUI_Displayer* aDisplayer = aConnector->workshop()->displayer();
285 aDisplayer->updateViewer();
287 mySketchMgr->onShowConstraintsToggle(myHasConstraintShown);
290 ModuleBase_Operation* PartSet_Module::currentOperation() const
292 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
293 XGUI_OperationMgr* anOpMgr = aConnector->workshop()->operationMgr();
294 return anOpMgr->currentOperation();
297 bool PartSet_Module::canUndo() const
299 bool aCanUndo = false;
300 SessionPtr aMgr = ModelAPI_Session::get();
301 if (aMgr->hasModuleDocument() && aMgr->canUndo()) {
302 aCanUndo = !aMgr->isOperation();
303 if (!aCanUndo) // check the enable state additionally by sketch manager
304 aCanUndo = aMgr->canUndo();
309 bool PartSet_Module::canRedo() const
311 bool aCanRedo = false;
312 SessionPtr aMgr = ModelAPI_Session::get();
313 if (aMgr->hasModuleDocument() && aMgr->canRedo()) {
314 aCanRedo = !aMgr->isOperation();
315 if (!aCanRedo) // check the enable state additionally by sketch manager
316 aCanRedo = aMgr->canRedo();
321 bool PartSet_Module::canApplyAction(const ObjectPtr& theObject, const QString& theActionId) const
324 if (theActionId == "MOVE_CMD") {
325 FeaturePtr aFeature = ModelAPI_Feature::feature(theObject);
327 // part features can not be moved in the history.
328 if (aFeature->getKind() == PartSetPlugin_Part::ID())
335 bool PartSet_Module::canEraseObject(const ObjectPtr& theObject) const
337 // the sketch manager put the restriction to the objects erase
338 return mySketchMgr->canEraseObject(theObject);
341 bool PartSet_Module::canDisplayObject(const ObjectPtr& theObject) const
343 // the sketch manager put the restriction to the objects display
344 return mySketchMgr->canDisplayObject(theObject);
347 bool PartSet_Module::canActivateSelection(const ObjectPtr& theObject) const
349 bool aCanActivate = ModuleBase_IModule::canActivateSelection(theObject);
351 ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
352 bool isSketchOp = PartSet_SketcherMgr::isSketchOperation(anOperation),
353 isNestedOp = PartSet_SketcherMgr::isNestedSketchOperation(anOperation);
354 if (isSketchOp || isNestedOp) {
355 // in active sketch operation it is possible to activate operation object in selection
356 // in the edit operation, e.g. points of the line can be moved when the line is edited
357 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>(anOperation);
358 aCanActivate = aCanActivate || (aFOperation && aFOperation->isEditOperation());
363 bool PartSet_Module::addViewerMenu(QMenu* theMenu, const QMap<QString, QAction*>& theStdActions) const
365 return myMenuMgr->addViewerMenu(theMenu, theStdActions);
368 void PartSet_Module::updateViewerMenu(const QMap<QString, QAction*>& theStdActions)
370 myMenuMgr->updateViewerMenu(theStdActions);
373 QString PartSet_Module::getFeatureError(const FeaturePtr& theFeature)
375 QString anError = ModuleBase_IModule::getFeatureError(theFeature);
376 if (anError.isEmpty())
377 anError = sketchMgr()->getFeatureError(theFeature);
382 void PartSet_Module::grantedOperationIds(ModuleBase_Operation* theOperation,
383 QStringList& theIds) const
385 myMenuMgr->grantedOperationIds(theOperation, theIds);
387 if (PartSet_SketcherMgr::isSketchOperation(theOperation)) {
388 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
389 XGUI_Workshop* aWorkshop = aConnector->workshop();
391 theIds.append(aWorkshop->contextMenuMgr()->action("DELETE_CMD")->text());
395 void PartSet_Module::activeSelectionModes(QIntList& theModes)
398 if (mySketchMgr->activeSketch().get())
399 PartSet_SketcherMgr::sketchSelectionModes(theModes);
402 bool PartSet_Module::isMouseOverWindow()
404 return mySketchMgr->isMouseOverWindow();
407 void PartSet_Module::closeDocument()
412 void PartSet_Module::clearViewer()
414 myCustomPrs->clearPrs();
416 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(myWorkshop);
417 XGUI_Workshop* aWorkshop = aConnector->workshop();
418 XGUI_Displayer* aDisplayer = aWorkshop->displayer();
419 aDisplayer->deactivateSelectionFilters();
422 void PartSet_Module::propertyPanelDefined(ModuleBase_Operation* theOperation)
424 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>(theOperation);
428 ModuleBase_IPropertyPanel* aPanel = aFOperation->propertyPanel();
429 // we have to manually activate the sketch label in edit mode
430 if (PartSet_SketcherMgr::isSketchOperation(aFOperation) && (aFOperation->isEditOperation()))
431 aPanel->activateWidget(aPanel->modelWidgets().first());
435 void PartSet_Module::onSelectionChanged()
437 ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
441 bool isSketcherOp = false;
442 // An edit operation is enable only if the current opeation is the sketch operation
443 if (mySketchMgr->activeSketch()) {
444 if (PartSet_Tools::sketchPlane(mySketchMgr->activeSketch()))
445 isSketcherOp = PartSet_SketcherMgr::isSketchOperation(aOperation);
448 // Editing of constraints can be done on selection
449 ModuleBase_ISelection* aSelect = myWorkshop->selection();
450 QList<ModuleBase_ViewerPrs> aSelected = aSelect->getSelected();
451 if (aSelected.size() == 1) {
452 ModuleBase_ViewerPrs aPrs = aSelected.first();
453 ObjectPtr aObject = aPrs.object();
454 FeaturePtr aFeature = ModelAPI_Feature::feature(aObject);
456 std::string aId = aFeature->getKind();
457 if ((aId == SketchPlugin_ConstraintRadius::ID()) ||
458 (aId == SketchPlugin_ConstraintLength::ID()) ||
459 (aId == SketchPlugin_ConstraintDistance::ID()) ||
460 (aId == SketchPlugin_ConstraintAngle::ID())) {
461 editFeature(aFeature);
468 void PartSet_Module::onKeyRelease(ModuleBase_IViewWindow* theWnd, QKeyEvent* theEvent)
470 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
471 XGUI_OperationMgr* anOpMgr = aConnector->workshop()->operationMgr();
472 anOpMgr->onKeyReleased(theEvent);
475 void PartSet_Module::onOperationActivatedByPreselection()
477 if (!mySketchReentrantMgr->canBeCommittedByPreselection())
479 mySketchMgr->operationActivatedByPreselection();
482 ModuleBase_ModelWidget* PartSet_Module::createWidgetByType(const std::string& theType, QWidget* theParent,
483 Config_WidgetAPI* theWidgetApi, std::string theParentId)
485 ModuleBase_IWorkshop* aWorkshop = workshop();
486 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(aWorkshop);
487 XGUI_Workshop* aXUIWorkshop = aConnector->workshop();
488 ModuleBase_ModelWidget* aWgt = NULL;
489 if (theType == "sketch-start-label") {
490 PartSet_WidgetSketchLabel* aLabelWgt = new PartSet_WidgetSketchLabel(theParent, aWorkshop,
491 theWidgetApi, theParentId, mySketchMgr->isConstraintsShown());
492 connect(aLabelWgt, SIGNAL(planeSelected(const std::shared_ptr<GeomAPI_Pln>&)),
493 mySketchMgr, SLOT(onPlaneSelected(const std::shared_ptr<GeomAPI_Pln>&)));
494 connect(aLabelWgt, SIGNAL(showConstraintToggled(bool)),
495 mySketchMgr, SLOT(onShowConstraintsToggle(bool)));
497 } else if (theType == "sketch-2dpoint_selector") {
498 PartSet_WidgetPoint2D* aPointWgt = new PartSet_WidgetPoint2D(theParent, aWorkshop,
499 theWidgetApi, theParentId);
500 aPointWgt->setSketch(mySketchMgr->activeSketch());
501 connect(aPointWgt, SIGNAL(vertexSelected()), sketchReentranceMgr(), SLOT(onVertexSelected()));
503 }else if (theType == "sketch-2dpoint_flyout_selector") {
504 PartSet_WidgetPoint2DFlyout* aPointWgt = new PartSet_WidgetPoint2DFlyout(theParent, aWorkshop,
505 theWidgetApi, theParentId);
506 aPointWgt->setSketch(mySketchMgr->activeSketch());
507 connect(aPointWgt, SIGNAL(vertexSelected()), sketchReentranceMgr(), SLOT(onVertexSelected()));
509 } else if (theType == "point2ddistance") {
510 PartSet_WidgetPoint2dDistance* aDistanceWgt = new PartSet_WidgetPoint2dDistance(theParent,
511 aWorkshop, theWidgetApi, theParentId);
512 aDistanceWgt->setSketch(mySketchMgr->activeSketch());
514 } else if (theType == "sketch_shape_selector") {
515 PartSet_WidgetShapeSelector* aShapeSelectorWgt =
516 new PartSet_WidgetShapeSelector(theParent, aWorkshop, theWidgetApi, theParentId);
517 aShapeSelectorWgt->setSketcher(mySketchMgr->activeSketch());
518 aWgt = aShapeSelectorWgt;
519 } else if (theType == "sketch_multi_selector") {
520 PartSet_WidgetMultiSelector* aShapeSelectorWgt =
521 new PartSet_WidgetMultiSelector(theParent, aWorkshop, theWidgetApi, theParentId);
522 aShapeSelectorWgt->setSketcher(mySketchMgr->activeSketch());
523 aWgt = aShapeSelectorWgt;
524 } else if (theType == WDG_DOUBLEVALUE_EDITOR) {
525 aWgt = new PartSet_WidgetEditor(theParent, aWorkshop, theWidgetApi, theParentId);
526 } else if (theType == "export_file_selector") {
527 aWgt = new PartSet_WidgetFileSelector(theParent, aWorkshop, theWidgetApi, theParentId);
528 } else if (theType == "sketch_launcher") {
529 aWgt = new PartSet_WidgetSketchCreator(theParent, this, theWidgetApi, theParentId);
530 } else if (theType == "module_choice") {
531 aWgt = new PartSet_WidgetChoice(theParent, theWidgetApi, theParentId);
532 connect(aWgt, SIGNAL(itemSelected(int)), SLOT(onBooleanOperationChange(int)));
537 ModuleBase_ModelWidget* PartSet_Module::activeWidget() const
539 ModuleBase_ModelWidget* anActiveWidget = 0;
541 anActiveWidget = mySketchReentrantMgr->internalActiveWidget();
542 if (!anActiveWidget) {
543 ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
545 ModuleBase_IPropertyPanel* aPanel = aOperation->propertyPanel();
546 anActiveWidget = aPanel->activeWidget();
549 return anActiveWidget;
552 bool PartSet_Module::deleteObjects()
554 bool isProcessed = false;
556 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
557 XGUI_Workshop* aWorkshop = aConnector->workshop();
558 XGUI_OperationMgr* anOpMgr = aWorkshop->operationMgr();
560 //SessionPtr aMgr = ModelAPI_Session::get();
561 // 1. check whether the delete should be processed in the module
562 ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
563 bool isSketchOp = PartSet_SketcherMgr::isSketchOperation(anOperation),
564 isNestedOp = PartSet_SketcherMgr::isNestedSketchOperation(anOperation);
565 if (isSketchOp || isNestedOp) {
567 // 2. find selected presentations
568 // selected objects should be collected before the current operation abort because
569 // the abort leads to selection lost on constraint objects. It can be corrected after #386 issue
570 ModuleBase_ISelection* aSel = workshop()->selection();
571 QObjectPtrList aSelectedObj = aSel->selectedPresentations();
572 // if there are no selected objects in the viewer, that means that the selection in another
573 // place cased this method. It is necessary to return the false value to understande in above
574 // method that delete is not processed
575 if (aSelectedObj.count() == 0)
578 // avoid delete of the objects, which are not belong to the current sketch
579 // in order to do not delete results of other sketches
580 QObjectPtrList aSketchObjects;
581 QObjectPtrList::const_iterator anIt = aSelectedObj.begin(), aLast = aSelectedObj.end();
582 for ( ; anIt != aLast; anIt++) {
583 ObjectPtr anObject = *anIt;
584 if (mySketchMgr->isObjectOfSketch(anObject)) {
585 // sketch feature should be used in this list because workshop deletes features only
586 // results are skipped
587 FeaturePtr aSketchFeature = ModelAPI_Feature::feature(anObject);
588 aSketchObjects.append(aSketchFeature);
591 // if the selection contains only local selected presentations from other sketches,
592 // the Delete operation should not be done at all
593 if (aSketchObjects.size() == 0)
596 // 3. start operation
597 QString aDescription = aWorkshop->contextMenuMgr()->action("DELETE_CMD")->text();
598 ModuleBase_OperationAction* anOpAction = new ModuleBase_OperationAction(aDescription, this);
600 // the active nested sketch operation should be aborted unconditionally
601 // the Delete action should be additionally granted for the Sketch operation
602 // in order to do not abort/commit it
603 if (!anOpMgr->canStartOperation(anOpAction->id()))
604 return true; // the objects are processed but can not be deleted
606 anOpMgr->startOperation(anOpAction);
608 // 4. delete features
609 // sketch feature should be skipped, only sub-features can be removed
610 // when sketch operation is active
611 aWorkshop->deleteFeatures(aSketchObjects);
613 anOpMgr->commitOperation();
618 void PartSet_Module::onFeatureTriggered()
620 QAction* aCmd = dynamic_cast<QAction*>(sender());
621 if (aCmd->isCheckable() && aCmd->isChecked()) {
622 // 1. check whether the delete should be processed in the module
623 ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
624 bool isNestedOp = PartSet_SketcherMgr::isNestedCreateOperation(anOperation);
626 // in case if in the viewer nothing is displayed, the create operation should not be
627 // comitted even if all values of the feature are initialized
628 if (!mySketchMgr->canDisplayCurrentCreatedFeature()) {
629 // the action information should be saved before the operation is aborted
630 // because this abort leads to update command status, which unchecks this action
631 anOperation->abort();
632 launchOperation(aCmd->data().toString());
636 ModuleBase_IModule::onFeatureTriggered();
639 void PartSet_Module::launchOperation(const QString& theCmdId)
641 if (PartSet_SketcherMgr::constraintsIdList().contains(theCmdId)) {
642 // Show constraints if a constraint was anOperation
643 myHasConstraintShown = mySketchMgr->isConstraintsShown();
644 mySketchMgr->onShowConstraintsToggle(true);
646 ModuleBase_IModule::launchOperation(theCmdId);
650 void PartSet_Module::onObjectDisplayed(ObjectPtr theObject, AISObjectPtr theAIS)
652 Handle(AIS_InteractiveObject) anAIS = theAIS->impl<Handle(AIS_InteractiveObject)>();
653 if (!anAIS.IsNull()) {
654 Handle(AIS_InteractiveContext) aCtx = anAIS->GetContext();
655 Handle(AIS_Dimension) aDim = Handle(AIS_Dimension)::DownCast(anAIS);
656 if (!aDim.IsNull()) {
657 aCtx->SetZLayer(aDim, myVisualLayerId);
659 Handle(SketcherPrs_SymbolPrs) aCons = Handle(SketcherPrs_SymbolPrs)::DownCast(anAIS);
661 aCtx->SetZLayer(aCons, myVisualLayerId);
666 void PartSet_Module::onBeforeObjectErase(ObjectPtr theObject, AISObjectPtr theAIS)
669 // it should be recomputed in order to disappear in the viewer if the corresponded object
671 //if (myCustomPrs->isActive())
672 // myCustomPrs->redisplay(theObject, false);
675 void PartSet_Module::onViewTransformed(int theTrsfType)
677 // Set length of arrows constant in pixel size
678 // if the operation is panning or rotate or panglobal then do nothing
679 if ((theTrsfType == 1) || (theTrsfType == 3) || (theTrsfType == 4))
681 ModuleBase_IViewer* aViewer = myWorkshop->viewer();
682 Handle(AIS_InteractiveContext) aContext = aViewer->AISContext();
683 if (aContext.IsNull())
686 //Handle(V3d_View) aView = aViewer->activeView();
688 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(myWorkshop);
689 XGUI_Workshop* aWorkshop = aConnector->workshop();
690 XGUI_Displayer* aDisplayer = aWorkshop->displayer();
691 Handle(V3d_Viewer) aV3dViewer = aContext->CurrentViewer();
692 Handle(V3d_View) aView;
694 for (aV3dViewer->InitDefinedViews();
695 aV3dViewer->MoreDefinedViews();
696 aV3dViewer->NextDefinedViews()) {
697 Handle(V3d_View) aV = aV3dViewer->DefinedView();
698 double aS = aV->Scale();
706 double aLen = aView->Convert(20);
708 double aPrevLen = SketcherPrs_Tools::getArrowSize();
709 SketcherPrs_Tools::setArrowSize(aLen);
710 const double aPrevScale = aViewer->Scale(aViewer->activeView());
711 const double aCurScale = aViewer->activeView()->Camera()->Scale();
712 aViewer->SetScale(aViewer->activeView(), aCurScale);
713 SketcherPrs_Tools::setTextHeight (aCurScale / aPrevScale * SketcherPrs_Tools::getTextHeight());
714 bool isModified = false;
715 QList<AISObjectPtr> aPrsList = aDisplayer->displayedPresentations();
716 foreach (AISObjectPtr aAIS, aPrsList) {
717 Handle(AIS_InteractiveObject) aAisObj = aAIS->impl<Handle(AIS_InteractiveObject)>();
719 Handle(AIS_Dimension) aDim = Handle(AIS_Dimension)::DownCast(aAisObj);
720 if (!aDim.IsNull()) {
721 aDim->DimensionAspect()->ArrowAspect()->SetLength(aLen);
722 aContext->Redisplay(aDim, false);
727 aDisplayer->updateViewer();
730 bool PartSet_Module::customizeObject(ObjectPtr theObject, const bool theUpdateViewer)
732 bool isRedisplayed = false;
733 if (myCustomPrs->isActive())
734 isRedisplayed = myCustomPrs->redisplay(theObject, theUpdateViewer);
736 return isRedisplayed;
739 void PartSet_Module::customizeObjectBrowser(QWidget* theObjectBrowser)
741 XGUI_ObjectsBrowser* aOB = dynamic_cast<XGUI_ObjectsBrowser*>(theObjectBrowser);
743 QLabel* aLabel = aOB->activeDocLabel();
744 aLabel->installEventFilter(myMenuMgr);
745 connect(aLabel, SIGNAL(customContextMenuRequested(const QPoint&)),
746 SLOT(onActiveDocPopup(const QPoint&)));
747 //QPalette aPalet = aLabel->palette();
748 //aPalet.setColor(QPalette::Text, QColor(0, 72, 140));
749 //aLabel->setPalette(aPalet);
750 aOB->treeView()->setExpandsOnDoubleClick(false);
751 connect(aOB->treeView(), SIGNAL(doubleClicked(const QModelIndex&)),
752 SLOT(onTreeViewDoubleClick(const QModelIndex&)));
756 void PartSet_Module::onActiveDocPopup(const QPoint& thePnt)
758 SessionPtr aMgr = ModelAPI_Session::get();
759 QAction* aActivatePartAction = myMenuMgr->action("ACTIVATE_PARTSET_CMD");
761 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(myWorkshop);
762 XGUI_Workshop* aWorkshop = aConnector->workshop();
763 QLabel* aHeader = aWorkshop->objectBrowser()->activeDocLabel();
765 aActivatePartAction->setEnabled((aMgr->activeDocument() != aMgr->moduleDocument()));
768 aMenu.addAction(aActivatePartAction);
769 aMenu.exec(aHeader->mapToGlobal(thePnt));
773 ObjectPtr PartSet_Module::findPresentedObject(const AISObjectPtr& theAIS) const
776 ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
778 /// If last line finished on vertex the lines creation sequence has to be break
779 ModuleBase_IPropertyPanel* aPanel = aOperation->propertyPanel();
780 ModuleBase_ModelWidget* anActiveWidget = aPanel->activeWidget();
781 // if there is an active widget, find the presented object in it
783 anActiveWidget = aPanel->preselectionWidget();
785 ModuleBase_WidgetValidated* aWidgetValidated = dynamic_cast<ModuleBase_WidgetValidated*>
787 if (aWidgetValidated)
788 anObject = aWidgetValidated->findPresentedObject(theAIS);
793 void PartSet_Module::addObjectBrowserMenu(QMenu* theMenu) const
795 QObjectPtrList aObjects = myWorkshop->selection()->selectedObjects();
796 int aSelected = aObjects.size();
797 SessionPtr aMgr = ModelAPI_Session::get();
798 QAction* aActivatePartAction = myMenuMgr->action("ACTIVATE_PART_CMD");
800 ModuleBase_Operation* aCurrentOp = myWorkshop->currentOperation();
801 if (aSelected == 1) {
802 bool hasResult = false;
803 bool hasFeature = false;
804 bool hasParameter = false;
805 bool hasSubFeature = false;
806 ModuleBase_Tools::checkObjects(aObjects, hasResult, hasFeature, hasParameter, hasSubFeature);
808 ObjectPtr aObject = aObjects.first();
810 ResultPartPtr aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aObject);
811 FeaturePtr aFeature = std::dynamic_pointer_cast<ModelAPI_Feature>(aObject);
812 bool isPart = aPart.get() ||
813 (aFeature.get() && (aFeature->getKind() == PartSetPlugin_Part::ID()));
815 DocumentPtr aPartDoc;
817 aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aFeature->firstResult());
819 if (aPart.get()) // this may be null is Part feature is disabled
820 aPartDoc = aPart->partDoc();
822 theMenu->addAction(aActivatePartAction);
823 aActivatePartAction->setEnabled((aMgr->activeDocument() != aPartDoc));
825 } else if (aObject->document() == aMgr->activeDocument()) {
826 if (hasParameter || hasFeature) {
827 myMenuMgr->action("EDIT_CMD")->setEnabled(true);
828 theMenu->addAction(myMenuMgr->action("EDIT_CMD"));
829 if (aCurrentOp && aFeature.get()) {
830 if (aCurrentOp->id().toStdString() == aFeature->getKind())
831 myMenuMgr->action("EDIT_CMD")->setEnabled(false);
836 ResultBodyPtr aResult = std::dynamic_pointer_cast<ModelAPI_ResultBody>(aObject);
838 theMenu->addAction(myMenuMgr->action("SELECT_PARENT_CMD"));
841 bool aNotDeactivate = (aCurrentOp == 0);
842 if (!aNotDeactivate) {
843 aActivatePartAction->setEnabled(false);
847 void PartSet_Module::processEvent(const std::shared_ptr<Events_Message>& theMessage)
849 if (theMessage->eventID() == Events_Loop::loop()->eventByName(EVENT_DOCUMENT_CHANGED)) {
850 // Do not change activation of parts if an operation active
851 static QStringList aAllowActivationList;
852 if (aAllowActivationList.isEmpty())
853 aAllowActivationList <<
854 QString(PartSetPlugin_Part::ID().c_str()) <<
855 QString(PartSetPlugin_Duplicate::ID().c_str()) <<
856 QString(PartSetPlugin_Remove::ID().c_str());
857 if (myWorkshop->currentOperation() &&
858 (!aAllowActivationList.contains(myWorkshop->currentOperation()->id())))
860 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(myWorkshop);
861 XGUI_Workshop* aWorkshop = aConnector->workshop();
862 XGUI_DataTree* aTreeView = aWorkshop->objectBrowser()->treeView();
863 QLabel* aLabel = aWorkshop->objectBrowser()->activeDocLabel();
864 QPalette aPalet = aLabel->palette();
866 SessionPtr aMgr = ModelAPI_Session::get();
867 DocumentPtr aActiveDoc = aMgr->activeDocument();
868 if (aActivePartIndex.isValid())
869 aTreeView->setExpanded(aActivePartIndex, false);
870 XGUI_DataModel* aDataModel = aWorkshop->objectBrowser()->dataModel();
871 aActivePartIndex = aDataModel->documentRootIndex(aActiveDoc);
872 if (aActivePartIndex.isValid())
873 aTreeView->setExpanded(aActivePartIndex, true);
875 aLabel->setPalette(aPalet);
876 aWorkshop->updateCommandStatus();
878 // Update displayed objects in order to update active color
879 XGUI_Displayer* aDisplayer = aWorkshop->displayer();
880 QObjectPtrList aObjects = aDisplayer->displayedObjects();
882 foreach(ObjectPtr aObj, aObjects) {
883 //TODO: replace by redisplay event.
884 aHidden = !aObj->data() || !aObj->data()->isValid() ||
885 aObj->isDisabled() || (!aObj->isDisplayed());
887 aDisplayer->redisplay(aObj, false);
889 aDisplayer->updateViewer();
893 void PartSet_Module::onTreeViewDoubleClick(const QModelIndex& theIndex)
895 if (myWorkshop->currentOperation()) // Do not change activation of parts if an operation active
897 SessionPtr aMgr = ModelAPI_Session::get();
898 if (!theIndex.isValid()) {
899 aMgr->setActiveDocument(aMgr->moduleDocument());
902 if (theIndex.column() != 0) // Use only first column
905 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(myWorkshop);
906 XGUI_Workshop* aWorkshop = aConnector->workshop();
907 XGUI_DataModel* aDataModel = aWorkshop->objectBrowser()->dataModel();
908 // De not use non editable Indexes
909 if ((aDataModel->flags(theIndex) & Qt::ItemIsSelectable) == 0)
911 ObjectPtr aObj = aDataModel->object(theIndex);
913 ResultPartPtr aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aObj);
914 if (!aPart.get()) { // Probably this is Feature
915 FeaturePtr aPartFeature = std::dynamic_pointer_cast<ModelAPI_Feature>(aObj);
916 if (aPartFeature.get() && (aPartFeature->getKind() == PartSetPlugin_Part::ID())) {
917 aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aPartFeature->firstResult());
920 if (aPart.get()) { // if this is a part
921 if (aPart->partDoc() == aMgr->activeDocument()) {
922 myMenuMgr->activatePartSet();
930 void PartSet_Module::onViewCreated(ModuleBase_IViewWindow*)
932 // z layer is created for all started operations in order to visualize operation AIS presentation
934 Handle(AIS_InteractiveContext) aContext = myWorkshop->viewer()->AISContext();
935 if (aContext.IsNull())
938 Handle(V3d_Viewer) aViewer = aContext->CurrentViewer();
939 if (myVisualLayerId == 0) {
940 if (myVisualLayerId == 0)
941 aViewer->AddZLayer(myVisualLayerId);
943 TColStd_SequenceOfInteger aZList;
944 aViewer->GetAllZLayers(aZList);
946 for (int i = 1; i <= aZList.Length(); i++) {
947 if (aZList(i) == myVisualLayerId) {
953 aViewer->AddZLayer(myVisualLayerId);
955 // if there is an active operation with validated widget,
956 // the filters of this widget should be activated in the created view
957 ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
959 ModuleBase_ModelWidget* anActiveWidget = activeWidget();
960 if (anActiveWidget) {
961 ModuleBase_WidgetSelector* aWSelector = dynamic_cast<ModuleBase_WidgetSelector*>(anActiveWidget);
963 aWSelector->activateSelectionAndFilters(true);
968 //******************************************************
969 void PartSet_Module::widgetStateChanged(int thePreviousState)
971 mySketchMgr->widgetStateChanged(thePreviousState);
974 bool PartSet_Module::processEnter(const std::string& thePreviousAttributeID)
976 return mySketchReentrantMgr->processEnter(thePreviousAttributeID);
979 //******************************************************
980 void PartSet_Module::beforeOperationStarted(ModuleBase_Operation* theOperation)
984 //******************************************************
985 void PartSet_Module::beforeOperationStopped(ModuleBase_Operation* theOperation)
987 if (PartSet_SketcherMgr::isSketchOperation(theOperation)) {
988 mySketchMgr->stopSketch(theOperation);
992 //******************************************************
993 void PartSet_Module::onBooleanOperationChange(int theOperation)
995 ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
998 ModuleBase_IPropertyPanel* aPanel = aOperation->propertyPanel();
999 switch (theOperation) {
1001 aPanel->setWindowTitle(tr("Cut"));
1004 aPanel->setWindowTitle(tr("Fuse"));
1007 aPanel->setWindowTitle(tr("Common"));