1 // Copyright (C) 2014-20xx CEA/DEN, EDF R&D
3 #include "PartSet_Module.h"
4 #include "PartSet_WidgetSketchLabel.h"
5 #include "PartSet_Validators.h"
6 #include "PartSet_Tools.h"
7 #include "PartSet_WidgetPoint2d.h"
8 #include "PartSet_WidgetPoint2dDistance.h"
9 #include "PartSet_WidgetPoint2DFlyout.h"
10 #include "PartSet_WidgetShapeSelector.h"
11 #include "PartSet_WidgetPoint2dAngle.h"
12 #include "PartSet_WidgetMultiSelector.h"
13 #include "PartSet_WidgetEditor.h"
14 #include "PartSet_WidgetFileSelector.h"
15 #include "PartSet_WidgetSketchCreator.h"
16 #include "PartSet_SketcherMgr.h"
17 #include "PartSet_SketcherReetntrantMgr.h"
18 #include "PartSet_MenuMgr.h"
19 #include "PartSet_CustomPrs.h"
20 #include "PartSet_IconFactory.h"
21 #include "PartSet_WidgetChoice.h"
23 #include "PartSet_Filters.h"
24 #include "PartSet_FilterInfinite.h"
26 #include <PartSetPlugin_Remove.h>
27 #include <PartSetPlugin_Part.h>
28 #include <PartSetPlugin_Duplicate.h>
30 #include <ModuleBase_Operation.h>
31 #include <ModuleBase_OperationAction.h>
32 #include <ModuleBase_IViewer.h>
33 #include <ModuleBase_IViewWindow.h>
34 #include <ModuleBase_IPropertyPanel.h>
35 #include <ModuleBase_WidgetEditor.h>
36 #include <ModuleBase_WidgetValidated.h>
37 #include <ModuleBase_FilterFactory.h>
38 #include <ModuleBase_Tools.h>
39 #include <ModuleBase_OperationFeature.h>
41 #include <ModelAPI_Object.h>
42 #include <ModelAPI_Events.h>
43 #include <ModelAPI_Validator.h>
44 #include <ModelAPI_Data.h>
45 #include <ModelAPI_Session.h>
46 #include <ModelAPI_ResultBody.h>
47 #include <ModelAPI_AttributeString.h>
49 #include <GeomDataAPI_Point2D.h>
50 #include <GeomDataAPI_Point.h>
51 #include <GeomDataAPI_Dir.h>
53 #include <XGUI_Displayer.h>
54 #include <XGUI_Workshop.h>
55 #include <XGUI_OperationMgr.h>
56 #include <XGUI_PropertyPanel.h>
57 #include <XGUI_ModuleConnector.h>
58 #include <XGUI_ContextMenuMgr.h>
59 #include <XGUI_Tools.h>
60 #include <XGUI_ObjectsBrowser.h>
61 #include <XGUI_SelectionMgr.h>
62 #include <XGUI_DataModel.h>
63 #include <XGUI_ErrorMgr.h>
65 #include <SketchPlugin_Feature.h>
66 #include <SketchPlugin_Sketch.h>
67 #include <SketchPlugin_ConstraintAngle.h>
68 #include <SketchPlugin_ConstraintLength.h>
69 #include <SketchPlugin_ConstraintDistance.h>
70 #include <SketchPlugin_ConstraintParallel.h>
71 #include <SketchPlugin_ConstraintPerpendicular.h>
72 #include <SketchPlugin_ConstraintRadius.h>
74 #include <SketcherPrs_SymbolPrs.h>
75 #include <SketcherPrs_Tools.h>
77 #include <Events_Loop.h>
78 #include <Config_PropManager.h>
79 #include <Config_Keywords.h>
81 #include <StdSelect_TypeOfFace.hxx>
82 #include <TopoDS_Vertex.hxx>
84 #include <TopoDS_Shape.hxx>
85 #include <BRep_Tool.hxx>
86 #include <AIS_Dimension.hxx>
89 #include <QMouseEvent>
92 #include <QApplication>
93 #include <QMessageBox>
94 #include <QMainWindow>
97 #include <GeomAlgoAPI_FaceBuilder.h>
98 #include <GeomDataAPI_Dir.h>
100 #include <SelectMgr_ListIteratorOfListOfFilter.hxx>
106 /*!Create and return new instance of XGUI_Module*/
107 extern "C" PARTSET_EXPORT ModuleBase_IModule* createModule(ModuleBase_IWorkshop* theWshop)
109 return new PartSet_Module(theWshop);
112 PartSet_Module::PartSet_Module(ModuleBase_IWorkshop* theWshop)
113 : ModuleBase_IModule(theWshop),
114 myVisualLayerId(0), myHasConstraintShown(true)
116 new PartSet_IconFactory();
118 mySketchMgr = new PartSet_SketcherMgr(this);
119 mySketchReentrantMgr = new PartSet_SketcherReetntrantMgr(theWshop);
121 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(theWshop);
122 XGUI_Workshop* aWorkshop = aConnector->workshop();
124 XGUI_OperationMgr* anOpMgr = aWorkshop->operationMgr();
125 connect(anOpMgr, SIGNAL(operationActivatedByPreselection()),
126 this, SLOT(onOperationActivatedByPreselection()));
128 ModuleBase_IViewer* aViewer = theWshop->viewer();
129 connect(aViewer, SIGNAL(keyRelease(ModuleBase_IViewWindow*, QKeyEvent*)),
130 this, SLOT(onKeyRelease(ModuleBase_IViewWindow*, QKeyEvent*)));
131 connect(aViewer, SIGNAL(viewTransformed(int)),
132 SLOT(onViewTransformed(int)));
133 connect(aViewer, SIGNAL(viewCreated(ModuleBase_IViewWindow*)),
134 SLOT(onViewCreated(ModuleBase_IViewWindow*)));
136 myMenuMgr = new PartSet_MenuMgr(this);
137 myCustomPrs = new PartSet_CustomPrs(theWshop);
139 Events_Loop* aLoop = Events_Loop::loop();
140 aLoop->registerListener(this, Events_Loop::eventByName(EVENT_DOCUMENT_CHANGED));
142 mySelectionFilters.Append(new PartSet_GlobalFilter(myWorkshop));
143 mySelectionFilters.Append(new PartSet_FilterInfinite(myWorkshop));
146 PartSet_Module::~PartSet_Module()
148 SelectMgr_ListIteratorOfListOfFilter aIt(mySelectionFilters);
149 for (; aIt.More(); aIt.Next()) {
150 Handle(SelectMgr_Filter) aFilter = aIt.Value();
151 if (!aFilter.IsNull())
157 void PartSet_Module::activateSelectionFilters()
159 SelectMgr_ListIteratorOfListOfFilter aIt(mySelectionFilters);
160 for (; aIt.More(); aIt.Next()) {
161 Handle(SelectMgr_Filter) aFilter = aIt.Value();
162 if (!aFilter.IsNull())
163 myWorkshop->viewer()->addSelectionFilter(aFilter);
167 void PartSet_Module::deactivateSelectionFilters()
169 SelectMgr_ListIteratorOfListOfFilter aIt(mySelectionFilters);
170 for (; aIt.More(); aIt.Next()) {
171 Handle(SelectMgr_Filter) aFilter = aIt.Value();
172 if (!aFilter.IsNull())
173 myWorkshop->viewer()->removeSelectionFilter(aFilter);
177 void PartSet_Module::registerValidators()
179 //Registering of validators
180 SessionPtr aMgr = ModelAPI_Session::get();
181 ModelAPI_ValidatorsFactory* aFactory = aMgr->validators();
182 aFactory->registerValidator("PartSet_DistanceSelection", new PartSet_DistanceSelection);
183 aFactory->registerValidator("PartSet_LengthSelection", new PartSet_LengthSelection);
184 aFactory->registerValidator("PartSet_PerpendicularSelection", new PartSet_PerpendicularSelection);
185 aFactory->registerValidator("PartSet_ParallelSelection", new PartSet_ParallelSelection);
186 aFactory->registerValidator("PartSet_RadiusSelection", new PartSet_RadiusSelection);
187 aFactory->registerValidator("PartSet_RigidSelection", new PartSet_RigidSelection);
188 aFactory->registerValidator("PartSet_CoincidentSelection", new PartSet_CoincidentSelection);
189 aFactory->registerValidator("PartSet_HVDirSelection", new PartSet_HVDirSelection);
190 aFactory->registerValidator("PartSet_TangentSelection", new PartSet_TangentSelection);
191 aFactory->registerValidator("PartSet_FilletSelection", new PartSet_FilletSelection);
192 aFactory->registerValidator("PartSet_AngleSelection", new PartSet_AngleSelection);
193 aFactory->registerValidator("PartSet_EqualSelection", new PartSet_EqualSelection);
194 aFactory->registerValidator("PartSet_DifferentObjects", new PartSet_DifferentObjectsValidator);
195 aFactory->registerValidator("PartSet_CoincidentAttr", new PartSet_CoincidentAttr);
196 aFactory->registerValidator("PartSet_SketchEntityValidator", new PartSet_SketchEntityValidator);
199 void PartSet_Module::registerFilters()
201 //Registering of selection filters
202 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
203 ModuleBase_FilterFactory* aFactory = aConnector->selectionFilters();
206 void PartSet_Module::registerProperties()
208 Config_PropManager::registerProp("Sketch planes", "planes_size", "Size", Config_Prop::Double,
210 Config_PropManager::registerProp("Sketch planes", "planes_thickness", "Thickness",
211 Config_Prop::Integer, SKETCH_WIDTH);
212 Config_PropManager::registerProp("Sketch planes", "rotate_to_plane", "Rotate to plane when selected",
213 Config_Prop::Boolean, "false");
216 void PartSet_Module::connectToPropertyPanel(ModuleBase_ModelWidget* theWidget, const bool isToConnect)
218 mySketchMgr->connectToPropertyPanel(theWidget, isToConnect);
221 void PartSet_Module::operationCommitted(ModuleBase_Operation* theOperation)
223 if (PartSet_SketcherMgr::isNestedSketchOperation(theOperation)) {
224 mySketchMgr->commitNestedSketch(theOperation);
227 /// Restart sketcher operations automatically
228 if (!mySketchReentrantMgr->operationCommitted(theOperation)) {
230 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>(theOperation);
231 if (aFOperation && !aFOperation->isEditOperation()) {
232 // the selection is cleared after commit the create operation
233 // in order to do not use the same selected objects in the restarted operation
234 // for common behaviour, the selection is cleared even if the operation is not restarted
235 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
236 XGUI_Workshop* aWorkshop = aConnector->workshop();
237 aWorkshop->selector()->clearSelection();
242 void PartSet_Module::operationAborted(ModuleBase_Operation* theOperation)
244 /// Restart sketcher operations automatically
245 mySketchReentrantMgr->operationAborted(theOperation);
248 void PartSet_Module::operationStarted(ModuleBase_Operation* theOperation)
250 /// Restart sketcher operations automatically
251 mySketchReentrantMgr->operationStarted(theOperation);
253 if (PartSet_SketcherMgr::isSketchOperation(theOperation)) {
254 mySketchMgr->startSketch(theOperation);
256 else if (PartSet_SketcherMgr::isNestedSketchOperation(theOperation)) {
257 mySketchMgr->startNestedSketch(theOperation);
260 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>(theOperation);
262 myCustomPrs->activate(aFOperation->feature(), true);
265 void PartSet_Module::operationResumed(ModuleBase_Operation* theOperation)
267 ModuleBase_IModule::operationResumed(theOperation);
269 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>(theOperation);
271 myCustomPrs->activate(aFOperation->feature(), true);
274 void PartSet_Module::operationStopped(ModuleBase_Operation* theOperation)
276 bool isModified = myCustomPrs->deactivate(false);
278 if (PartSet_SketcherMgr::isNestedSketchOperation(theOperation)) {
279 mySketchMgr->stopNestedSketch(theOperation);
282 //VSV: Viewer is updated on feature update and redisplay
284 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(myWorkshop);
285 XGUI_Displayer* aDisplayer = aConnector->workshop()->displayer();
286 aDisplayer->updateViewer();
288 mySketchMgr->onShowConstraintsToggle(myHasConstraintShown);
291 ModuleBase_Operation* PartSet_Module::currentOperation() const
293 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
294 XGUI_OperationMgr* anOpMgr = aConnector->workshop()->operationMgr();
295 return anOpMgr->currentOperation();
298 bool PartSet_Module::canUndo() const
300 bool aCanUndo = false;
301 SessionPtr aMgr = ModelAPI_Session::get();
302 if (aMgr->hasModuleDocument() && aMgr->canUndo()) {
303 aCanUndo = !aMgr->isOperation();
304 if (!aCanUndo) // check the enable state additionally by sketch manager
305 aCanUndo = aMgr->canUndo();
310 bool PartSet_Module::canRedo() const
312 bool aCanRedo = false;
313 SessionPtr aMgr = ModelAPI_Session::get();
314 if (aMgr->hasModuleDocument() && aMgr->canRedo()) {
315 aCanRedo = !aMgr->isOperation();
316 if (!aCanRedo) // check the enable state additionally by sketch manager
317 aCanRedo = aMgr->canRedo();
322 bool PartSet_Module::canApplyAction(const ObjectPtr& theObject, const QString& theActionId) const
325 if (theActionId == "DELETE_CMD" || theActionId == "MOVE_CMD") {
326 FeaturePtr aFeature = ModelAPI_Feature::feature(theObject);
328 // part features are removed in the PartSet module only.
329 if (aFeature->getKind() == PartSetPlugin_Part::ID())
336 bool PartSet_Module::canEraseObject(const ObjectPtr& theObject) const
338 // the sketch manager put the restriction to the objects erase
339 return mySketchMgr->canEraseObject(theObject);
342 bool PartSet_Module::canDisplayObject(const ObjectPtr& theObject) const
344 // the sketch manager put the restriction to the objects display
345 return mySketchMgr->canDisplayObject(theObject);
348 bool PartSet_Module::canActivateSelection(const ObjectPtr& theObject) const
350 bool aCanActivate = ModuleBase_IModule::canActivateSelection(theObject);
352 ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
353 bool isSketchOp = PartSet_SketcherMgr::isSketchOperation(anOperation),
354 isNestedOp = PartSet_SketcherMgr::isNestedSketchOperation(anOperation);
355 if (isSketchOp || isNestedOp) {
356 // in active sketch operation it is possible to activate operation object in selection
357 // in the edit operation, e.g. points of the line can be moved when the line is edited
358 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>(anOperation);
359 aCanActivate = aCanActivate || (aFOperation && aFOperation->isEditOperation());
364 bool PartSet_Module::addViewerMenu(QMenu* theMenu, const QMap<QString, QAction*>& theStdActions) const
366 return myMenuMgr->addViewerMenu(theMenu, theStdActions);
369 void PartSet_Module::updateViewerMenu(const QMap<QString, QAction*>& theStdActions)
371 myMenuMgr->updateViewerMenu(theStdActions);
374 QString PartSet_Module::getFeatureError(const FeaturePtr& theFeature)
376 QString anError = ModuleBase_IModule::getFeatureError(theFeature);
377 if (anError.isEmpty())
378 anError = sketchMgr()->getFeatureError(theFeature);
383 void PartSet_Module::grantedOperationIds(ModuleBase_Operation* theOperation,
384 QStringList& theIds) const
386 myMenuMgr->grantedOperationIds(theOperation, theIds);
388 if (PartSet_SketcherMgr::isSketchOperation(theOperation)) {
389 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
390 XGUI_Workshop* aWorkshop = aConnector->workshop();
392 theIds.append(aWorkshop->contextMenuMgr()->action("DELETE_CMD")->text());
396 void PartSet_Module::activeSelectionModes(QIntList& theModes)
399 if (mySketchMgr->activeSketch().get())
400 PartSet_SketcherMgr::sketchSelectionModes(theModes);
403 bool PartSet_Module::isMouseOverWindow()
405 return mySketchMgr->isMouseOverWindow();
408 void PartSet_Module::closeDocument()
413 void PartSet_Module::clearViewer()
415 myCustomPrs->clearPrs();
417 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(myWorkshop);
418 XGUI_Workshop* aWorkshop = aConnector->workshop();
419 XGUI_Displayer* aDisplayer = aWorkshop->displayer();
420 aDisplayer->deactivateSelectionFilters();
423 void PartSet_Module::propertyPanelDefined(ModuleBase_Operation* theOperation)
425 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>(theOperation);
429 ModuleBase_IPropertyPanel* aPanel = aFOperation->propertyPanel();
430 // we have to manually activate the sketch label in edit mode
431 if (PartSet_SketcherMgr::isSketchOperation(aFOperation) && (aFOperation->isEditOperation()))
432 aPanel->activateWidget(aPanel->modelWidgets().first());
436 void PartSet_Module::onSelectionChanged()
438 ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
442 bool isSketcherOp = false;
443 // An edit operation is enable only if the current opeation is the sketch operation
444 if (mySketchMgr->activeSketch()) {
445 if (PartSet_Tools::sketchPlane(mySketchMgr->activeSketch()))
446 isSketcherOp = PartSet_SketcherMgr::isSketchOperation(aOperation);
449 // Editing of constraints can be done on selection
450 ModuleBase_ISelection* aSelect = myWorkshop->selection();
451 QList<ModuleBase_ViewerPrs> aSelected = aSelect->getSelected();
452 if (aSelected.size() == 1) {
453 ModuleBase_ViewerPrs aPrs = aSelected.first();
454 ObjectPtr aObject = aPrs.object();
455 FeaturePtr aFeature = ModelAPI_Feature::feature(aObject);
457 std::string aId = aFeature->getKind();
458 if ((aId == SketchPlugin_ConstraintRadius::ID()) ||
459 (aId == SketchPlugin_ConstraintLength::ID()) ||
460 (aId == SketchPlugin_ConstraintDistance::ID()) ||
461 (aId == SketchPlugin_ConstraintAngle::ID())) {
462 editFeature(aFeature);
469 void PartSet_Module::onKeyRelease(ModuleBase_IViewWindow* theWnd, QKeyEvent* theEvent)
471 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
472 XGUI_OperationMgr* anOpMgr = aConnector->workshop()->operationMgr();
473 anOpMgr->onKeyReleased(theEvent);
476 void PartSet_Module::onOperationActivatedByPreselection()
478 if (!mySketchReentrantMgr->canBeCommittedByPreselection())
480 mySketchMgr->operationActivatedByPreselection();
483 ModuleBase_ModelWidget* PartSet_Module::createWidgetByType(const std::string& theType, QWidget* theParent,
484 Config_WidgetAPI* theWidgetApi, std::string theParentId)
486 ModuleBase_IWorkshop* aWorkshop = workshop();
487 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(aWorkshop);
488 XGUI_Workshop* aXUIWorkshop = aConnector->workshop();
489 ModuleBase_ModelWidget* aWgt = NULL;
490 if (theType == "sketch-start-label") {
491 PartSet_WidgetSketchLabel* aLabelWgt = new PartSet_WidgetSketchLabel(theParent, aWorkshop,
492 theWidgetApi, theParentId, mySketchMgr->isConstraintsShown());
493 connect(aLabelWgt, SIGNAL(planeSelected(const std::shared_ptr<GeomAPI_Pln>&)),
494 mySketchMgr, SLOT(onPlaneSelected(const std::shared_ptr<GeomAPI_Pln>&)));
495 connect(aLabelWgt, SIGNAL(showConstraintToggled(bool)),
496 mySketchMgr, SLOT(onShowConstraintsToggle(bool)));
498 } else if (theType == "sketch-2dpoint_selector") {
499 PartSet_WidgetPoint2D* aPointWgt = new PartSet_WidgetPoint2D(theParent, aWorkshop,
500 theWidgetApi, theParentId);
501 aPointWgt->setSketch(mySketchMgr->activeSketch());
502 connect(aPointWgt, SIGNAL(vertexSelected()), sketchReentranceMgr(), SLOT(onVertexSelected()));
504 }else if (theType == "sketch-2dpoint_flyout_selector") {
505 PartSet_WidgetPoint2DFlyout* aPointWgt = new PartSet_WidgetPoint2DFlyout(theParent, aWorkshop,
506 theWidgetApi, theParentId);
507 aPointWgt->setSketch(mySketchMgr->activeSketch());
508 connect(aPointWgt, SIGNAL(vertexSelected()), sketchReentranceMgr(), SLOT(onVertexSelected()));
510 } else if (theType == "point2ddistance") {
511 PartSet_WidgetPoint2dDistance* aDistanceWgt = new PartSet_WidgetPoint2dDistance(theParent,
512 aWorkshop, theWidgetApi, theParentId);
513 aDistanceWgt->setSketch(mySketchMgr->activeSketch());
515 } else if(theType == "point2dangle") {
516 PartSet_WidgetPoint2dAngle* anAngleWgt = new PartSet_WidgetPoint2dAngle(theParent,
517 aWorkshop, theWidgetApi, theParentId);
518 anAngleWgt->setSketch(mySketchMgr->activeSketch());
520 } else if (theType == "sketch_shape_selector") {
521 PartSet_WidgetShapeSelector* aShapeSelectorWgt =
522 new PartSet_WidgetShapeSelector(theParent, aWorkshop, theWidgetApi, theParentId);
523 aShapeSelectorWgt->setSketcher(mySketchMgr->activeSketch());
524 aWgt = aShapeSelectorWgt;
525 } else if (theType == "sketch_multi_selector") {
526 PartSet_WidgetMultiSelector* aShapeSelectorWgt =
527 new PartSet_WidgetMultiSelector(theParent, aWorkshop, theWidgetApi, theParentId);
528 aShapeSelectorWgt->setSketcher(mySketchMgr->activeSketch());
529 aWgt = aShapeSelectorWgt;
530 } else if (theType == WDG_DOUBLEVALUE_EDITOR) {
531 aWgt = new PartSet_WidgetEditor(theParent, aWorkshop, theWidgetApi, theParentId);
532 } else if (theType == "export_file_selector") {
533 aWgt = new PartSet_WidgetFileSelector(theParent, aWorkshop, theWidgetApi, theParentId);
534 } else if (theType == "sketch_launcher") {
535 aWgt = new PartSet_WidgetSketchCreator(theParent, this, theWidgetApi, theParentId);
536 } else if (theType == "module_choice") {
537 aWgt = new PartSet_WidgetChoice(theParent, theWidgetApi, theParentId);
538 connect(aWgt, SIGNAL(itemSelected(int)), SLOT(onBooleanOperationChange(int)));
543 ModuleBase_ModelWidget* PartSet_Module::activeWidget() const
545 ModuleBase_ModelWidget* anActiveWidget = 0;
547 anActiveWidget = mySketchReentrantMgr->internalActiveWidget();
548 if (!anActiveWidget) {
549 ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
551 ModuleBase_IPropertyPanel* aPanel = aOperation->propertyPanel();
552 anActiveWidget = aPanel->activeWidget();
555 return anActiveWidget;
558 bool PartSet_Module::deleteObjects()
560 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
561 XGUI_Workshop* aWorkshop = aConnector->workshop();
562 XGUI_OperationMgr* anOpMgr = aWorkshop->operationMgr();
564 //SessionPtr aMgr = ModelAPI_Session::get();
565 // 1. check whether the delete should be processed in the module
566 ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
567 bool isSketchOp = PartSet_SketcherMgr::isSketchOperation(anOperation),
568 isNestedOp = PartSet_SketcherMgr::isNestedSketchOperation(anOperation);
569 if (isSketchOp || isNestedOp) {
570 // 2. find selected presentations
571 // selected objects should be collected before the current operation abort because
572 // the abort leads to selection lost on constraint objects. It can be corrected after #386 issue
573 ModuleBase_ISelection* aSel = workshop()->selection();
574 QObjectPtrList aSelectedObj = aSel->selectedPresentations();
575 // if there are no selected objects in the viewer, that means that the selection in another
576 // place cased this method. It is necessary to return the false value to understande in above
577 // method that delete is not processed
578 if (aSelectedObj.count() == 0)
581 // avoid delete of the objects, which are not belong to the current sketch
582 // in order to do not delete results of other sketches
583 QObjectPtrList aSketchObjects;
584 QObjectPtrList::const_iterator anIt = aSelectedObj.begin(), aLast = aSelectedObj.end();
585 for ( ; anIt != aLast; anIt++) {
586 ObjectPtr anObject = *anIt;
587 if (mySketchMgr->isObjectOfSketch(anObject)) {
588 // sketch feature should be used in this list because workshop deletes features only
589 // results are skipped
590 FeaturePtr aSketchFeature = ModelAPI_Feature::feature(anObject);
591 aSketchObjects.append(aSketchFeature);
594 // if the selection contains only local selected presentations from other sketches,
595 // the Delete operation should not be done at all
596 if (aSketchObjects.size() == 0)
599 // 3. start operation
600 QString aDescription = aWorkshop->contextMenuMgr()->action("DELETE_CMD")->text();
601 ModuleBase_OperationAction* anOpAction = new ModuleBase_OperationAction(aDescription, this);
603 // the active nested sketch operation should be aborted unconditionally
604 // the Delete action should be additionally granted for the Sketch operation
605 // in order to do not abort/commit it
606 if (!anOpMgr->canStartOperation(anOpAction->id()))
607 return true; // the objects are processed but can not be deleted
609 anOpMgr->startOperation(anOpAction);
611 // 4. delete features
612 // sketch feature should be skipped, only sub-features can be removed
613 // when sketch operation is active
614 aWorkshop->deleteFeatures(aSketchObjects);
616 anOpMgr->commitOperation();
619 bool isPartRemoved = false;
620 // Delete part with help of PartSet plugin
621 // TODO: the deleted objects has to be processed by multiselection
622 QObjectPtrList aObjects = myWorkshop->selection()->selectedObjects();
623 if (aObjects.size() == 1) {
624 ObjectPtr aObj = aObjects.first();
625 FeaturePtr aFeature = std::dynamic_pointer_cast<ModelAPI_Feature>(aObj);
626 if (aFeature.get() && (aFeature->getKind() == PartSetPlugin_Part::ID())) {
627 // Remove feature should be created in the document of the part results
628 ResultPtr aPartResult = aFeature->firstResult();
629 if (aPartResult.get()) {
630 std::shared_ptr<ModelAPI_ResultPart> aPart =
631 std::dynamic_pointer_cast<ModelAPI_ResultPart>(aPartResult);
632 DocumentPtr aPartDoc = aPart->partDoc();
633 if (aPartDoc.get()) {
634 ModuleBase_OperationAction* anOpAction = new ModuleBase_OperationAction
635 (PartSetPlugin_Remove::ID().c_str(), this);
636 if (!anOpMgr->canStartOperation(anOpAction->id()))
637 return true; // the objects are processed but can not be deleted
639 anOpMgr->startOperation(anOpAction);
641 FeaturePtr aFeature = aPartDoc->addFeature(PartSetPlugin_Remove::ID());
644 anOpMgr->commitOperation();
645 isPartRemoved = true;
650 return isPartRemoved;
655 void PartSet_Module::onFeatureTriggered()
657 QAction* aCmd = dynamic_cast<QAction*>(sender());
658 if (aCmd->isCheckable() && aCmd->isChecked()) {
659 // 1. check whether the delete should be processed in the module
660 ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
661 bool isNestedOp = PartSet_SketcherMgr::isNestedCreateOperation(anOperation);
663 // in case if in the viewer nothing is displayed, the create operation should not be
664 // comitted even if all values of the feature are initialized
665 if (!mySketchMgr->canDisplayCurrentCreatedFeature()) {
666 // the action information should be saved before the operation is aborted
667 // because this abort leads to update command status, which unchecks this action
668 anOperation->abort();
669 launchOperation(aCmd->data().toString());
673 ModuleBase_IModule::onFeatureTriggered();
676 void PartSet_Module::launchOperation(const QString& theCmdId)
678 if (PartSet_SketcherMgr::constraintsIdList().contains(theCmdId)) {
679 // Show constraints if a constraint was anOperation
680 myHasConstraintShown = mySketchMgr->isConstraintsShown();
681 mySketchMgr->onShowConstraintsToggle(true);
683 ModuleBase_IModule::launchOperation(theCmdId);
687 void PartSet_Module::onObjectDisplayed(ObjectPtr theObject, AISObjectPtr theAIS)
689 Handle(AIS_InteractiveObject) anAIS = theAIS->impl<Handle(AIS_InteractiveObject)>();
690 if (!anAIS.IsNull()) {
691 Handle(AIS_InteractiveContext) aCtx = anAIS->GetContext();
692 Handle(AIS_Dimension) aDim = Handle(AIS_Dimension)::DownCast(anAIS);
693 if (!aDim.IsNull()) {
694 aCtx->SetZLayer(aDim, myVisualLayerId);
696 Handle(SketcherPrs_SymbolPrs) aCons = Handle(SketcherPrs_SymbolPrs)::DownCast(anAIS);
698 aCtx->SetZLayer(aCons, myVisualLayerId);
703 void PartSet_Module::onBeforeObjectErase(ObjectPtr theObject, AISObjectPtr theAIS)
706 // it should be recomputed in order to disappear in the viewer if the corresponded object
708 //if (myCustomPrs->isActive())
709 // myCustomPrs->redisplay(theObject, false);
712 void PartSet_Module::onViewTransformed(int theTrsfType)
714 // Set length of arrows constant in pixel size
715 // if the operation is panning or rotate or panglobal then do nothing
716 if ((theTrsfType == 1) || (theTrsfType == 3) || (theTrsfType == 4))
718 ModuleBase_IViewer* aViewer = myWorkshop->viewer();
719 Handle(AIS_InteractiveContext) aContext = aViewer->AISContext();
720 if (aContext.IsNull())
723 //Handle(V3d_View) aView = aViewer->activeView();
725 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(myWorkshop);
726 XGUI_Workshop* aWorkshop = aConnector->workshop();
727 XGUI_Displayer* aDisplayer = aWorkshop->displayer();
728 Handle(V3d_Viewer) aV3dViewer = aContext->CurrentViewer();
729 Handle(V3d_View) aView;
731 for (aV3dViewer->InitDefinedViews();
732 aV3dViewer->MoreDefinedViews();
733 aV3dViewer->NextDefinedViews()) {
734 Handle(V3d_View) aV = aV3dViewer->DefinedView();
735 double aS = aV->Scale();
743 double aLen = aView->Convert(20);
745 double aPrevLen = SketcherPrs_Tools::getArrowSize();
746 SketcherPrs_Tools::setArrowSize(aLen);
747 const double aPrevScale = aViewer->Scale(aViewer->activeView());
748 const double aCurScale = aViewer->activeView()->Camera()->Scale();
749 aViewer->SetScale(aViewer->activeView(), aCurScale);
750 SketcherPrs_Tools::setTextHeight (aCurScale / aPrevScale * SketcherPrs_Tools::getTextHeight());
751 bool isModified = false;
752 QList<AISObjectPtr> aPrsList = aDisplayer->displayedPresentations();
753 foreach (AISObjectPtr aAIS, aPrsList) {
754 Handle(AIS_InteractiveObject) aAisObj = aAIS->impl<Handle(AIS_InteractiveObject)>();
756 Handle(AIS_Dimension) aDim = Handle(AIS_Dimension)::DownCast(aAisObj);
757 if (!aDim.IsNull()) {
758 aDim->DimensionAspect()->ArrowAspect()->SetLength(aLen);
759 aContext->Redisplay(aDim, false);
764 aDisplayer->updateViewer();
767 bool PartSet_Module::customizeObject(ObjectPtr theObject, const bool theUpdateViewer)
769 bool isRedisplayed = false;
770 if (myCustomPrs->isActive())
771 isRedisplayed = myCustomPrs->redisplay(theObject, theUpdateViewer);
773 return isRedisplayed;
776 void PartSet_Module::customizeObjectBrowser(QWidget* theObjectBrowser)
778 XGUI_ObjectsBrowser* aOB = dynamic_cast<XGUI_ObjectsBrowser*>(theObjectBrowser);
780 QLabel* aLabel = aOB->activeDocLabel();
781 aLabel->installEventFilter(myMenuMgr);
782 connect(aLabel, SIGNAL(customContextMenuRequested(const QPoint&)),
783 SLOT(onActiveDocPopup(const QPoint&)));
784 //QPalette aPalet = aLabel->palette();
785 //aPalet.setColor(QPalette::Text, QColor(0, 72, 140));
786 //aLabel->setPalette(aPalet);
787 aOB->treeView()->setExpandsOnDoubleClick(false);
788 connect(aOB->treeView(), SIGNAL(doubleClicked(const QModelIndex&)),
789 SLOT(onTreeViewDoubleClick(const QModelIndex&)));
793 void PartSet_Module::onActiveDocPopup(const QPoint& thePnt)
795 SessionPtr aMgr = ModelAPI_Session::get();
796 QAction* aActivatePartAction = myMenuMgr->action("ACTIVATE_PARTSET_CMD");
798 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(myWorkshop);
799 XGUI_Workshop* aWorkshop = aConnector->workshop();
800 QLabel* aHeader = aWorkshop->objectBrowser()->activeDocLabel();
802 aActivatePartAction->setEnabled((aMgr->activeDocument() != aMgr->moduleDocument()));
805 aMenu.addAction(aActivatePartAction);
806 aMenu.exec(aHeader->mapToGlobal(thePnt));
810 ObjectPtr PartSet_Module::findPresentedObject(const AISObjectPtr& theAIS) const
813 ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
815 /// If last line finished on vertex the lines creation sequence has to be break
816 ModuleBase_IPropertyPanel* aPanel = aOperation->propertyPanel();
817 ModuleBase_ModelWidget* anActiveWidget = aPanel->activeWidget();
818 // if there is an active widget, find the presented object in it
820 anActiveWidget = aPanel->preselectionWidget();
822 ModuleBase_WidgetValidated* aWidgetValidated = dynamic_cast<ModuleBase_WidgetValidated*>
824 if (aWidgetValidated)
825 anObject = aWidgetValidated->findPresentedObject(theAIS);
830 void PartSet_Module::addObjectBrowserMenu(QMenu* theMenu) const
832 QObjectPtrList aObjects = myWorkshop->selection()->selectedObjects();
833 int aSelected = aObjects.size();
834 SessionPtr aMgr = ModelAPI_Session::get();
835 QAction* aActivatePartAction = myMenuMgr->action("ACTIVATE_PART_CMD");
837 ModuleBase_Operation* aCurrentOp = myWorkshop->currentOperation();
838 if (aSelected == 1) {
839 bool hasResult = false;
840 bool hasFeature = false;
841 bool hasParameter = false;
842 bool hasSubFeature = false;
843 ModuleBase_Tools::checkObjects(aObjects, hasResult, hasFeature, hasParameter, hasSubFeature);
845 ObjectPtr aObject = aObjects.first();
847 ResultPartPtr aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aObject);
848 FeaturePtr aFeature = std::dynamic_pointer_cast<ModelAPI_Feature>(aObject);
849 bool isPart = aPart.get() ||
850 (aFeature.get() && (aFeature->getKind() == PartSetPlugin_Part::ID()));
852 DocumentPtr aPartDoc;
854 aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aFeature->firstResult());
856 if (aPart.get()) // this may be null is Part feature is disabled
857 aPartDoc = aPart->partDoc();
859 theMenu->addAction(aActivatePartAction);
860 aActivatePartAction->setEnabled((aMgr->activeDocument() != aPartDoc));
862 } else if (aObject->document() == aMgr->activeDocument()) {
863 if (hasParameter || hasFeature) {
864 myMenuMgr->action("EDIT_CMD")->setEnabled(true);
865 theMenu->addAction(myMenuMgr->action("EDIT_CMD"));
866 if (aCurrentOp && aFeature.get()) {
867 if (aCurrentOp->id().toStdString() == aFeature->getKind())
868 myMenuMgr->action("EDIT_CMD")->setEnabled(false);
873 ResultBodyPtr aResult = std::dynamic_pointer_cast<ModelAPI_ResultBody>(aObject);
875 theMenu->addAction(myMenuMgr->action("SELECT_PARENT_CMD"));
878 bool aNotDeactivate = (aCurrentOp == 0);
879 if (!aNotDeactivate) {
880 aActivatePartAction->setEnabled(false);
884 void PartSet_Module::processEvent(const std::shared_ptr<Events_Message>& theMessage)
886 if (theMessage->eventID() == Events_Loop::loop()->eventByName(EVENT_DOCUMENT_CHANGED)) {
887 // Do not change activation of parts if an operation active
888 static QStringList aAllowActivationList;
889 if (aAllowActivationList.isEmpty())
890 aAllowActivationList <<
891 QString(PartSetPlugin_Part::ID().c_str()) <<
892 QString(PartSetPlugin_Duplicate::ID().c_str()) <<
893 QString(PartSetPlugin_Remove::ID().c_str());
894 if (myWorkshop->currentOperation() &&
895 (!aAllowActivationList.contains(myWorkshop->currentOperation()->id())))
897 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(myWorkshop);
898 XGUI_Workshop* aWorkshop = aConnector->workshop();
899 XGUI_DataTree* aTreeView = aWorkshop->objectBrowser()->treeView();
900 QLabel* aLabel = aWorkshop->objectBrowser()->activeDocLabel();
901 QPalette aPalet = aLabel->palette();
903 SessionPtr aMgr = ModelAPI_Session::get();
904 DocumentPtr aActiveDoc = aMgr->activeDocument();
905 if (aActivePartIndex.isValid())
906 aTreeView->setExpanded(aActivePartIndex, false);
907 XGUI_DataModel* aDataModel = aWorkshop->objectBrowser()->dataModel();
908 aActivePartIndex = aDataModel->documentRootIndex(aActiveDoc);
909 if (aActivePartIndex.isValid())
910 aTreeView->setExpanded(aActivePartIndex, true);
912 aLabel->setPalette(aPalet);
913 aWorkshop->updateCommandStatus();
915 // Update displayed objects in order to update active color
916 XGUI_Displayer* aDisplayer = aWorkshop->displayer();
917 QObjectPtrList aObjects = aDisplayer->displayedObjects();
919 foreach(ObjectPtr aObj, aObjects) {
920 //TODO: replace by redisplay event.
921 aHidden = !aObj->data() || !aObj->data()->isValid() ||
922 aObj->isDisabled() || (!aObj->isDisplayed());
924 aDisplayer->redisplay(aObj, false);
926 aDisplayer->updateViewer();
930 void PartSet_Module::onTreeViewDoubleClick(const QModelIndex& theIndex)
932 if (myWorkshop->currentOperation()) // Do not change activation of parts if an operation active
934 SessionPtr aMgr = ModelAPI_Session::get();
935 if (!theIndex.isValid()) {
936 aMgr->setActiveDocument(aMgr->moduleDocument());
939 if (theIndex.column() != 0) // Use only first column
942 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(myWorkshop);
943 XGUI_Workshop* aWorkshop = aConnector->workshop();
944 XGUI_DataModel* aDataModel = aWorkshop->objectBrowser()->dataModel();
945 // De not use non editable Indexes
946 if ((aDataModel->flags(theIndex) & Qt::ItemIsSelectable) == 0)
948 ObjectPtr aObj = aDataModel->object(theIndex);
950 ResultPartPtr aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aObj);
951 if (!aPart.get()) { // Probably this is Feature
952 FeaturePtr aPartFeature = std::dynamic_pointer_cast<ModelAPI_Feature>(aObj);
953 if (aPartFeature.get() && (aPartFeature->getKind() == PartSetPlugin_Part::ID())) {
954 aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aPartFeature->firstResult());
957 if (aPart.get()) { // if this is a part
958 if (aPart->partDoc() == aMgr->activeDocument()) {
959 myMenuMgr->activatePartSet();
967 void PartSet_Module::onViewCreated(ModuleBase_IViewWindow*)
969 // z layer is created for all started operations in order to visualize operation AIS presentation
971 Handle(AIS_InteractiveContext) aContext = myWorkshop->viewer()->AISContext();
972 if (aContext.IsNull())
975 Handle(V3d_Viewer) aViewer = aContext->CurrentViewer();
976 if (myVisualLayerId == 0) {
977 if (myVisualLayerId == 0)
978 aViewer->AddZLayer(myVisualLayerId);
980 TColStd_SequenceOfInteger aZList;
981 aViewer->GetAllZLayers(aZList);
983 for (int i = 1; i <= aZList.Length(); i++) {
984 if (aZList(i) == myVisualLayerId) {
990 aViewer->AddZLayer(myVisualLayerId);
992 // if there is an active operation with validated widget,
993 // the filters of this widget should be activated in the created view
994 ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
996 ModuleBase_ModelWidget* anActiveWidget = activeWidget();
997 if (anActiveWidget) {
998 ModuleBase_WidgetSelector* aWSelector = dynamic_cast<ModuleBase_WidgetSelector*>(anActiveWidget);
1000 aWSelector->activateSelectionAndFilters(true);
1005 //******************************************************
1006 void PartSet_Module::widgetStateChanged(int thePreviousState)
1008 mySketchMgr->widgetStateChanged(thePreviousState);
1011 bool PartSet_Module::processEnter(const std::string& thePreviousAttributeID)
1013 return mySketchReentrantMgr->processEnter(thePreviousAttributeID);
1016 //******************************************************
1017 void PartSet_Module::beforeOperationStarted(ModuleBase_Operation* theOperation)
1021 //******************************************************
1022 void PartSet_Module::beforeOperationStopped(ModuleBase_Operation* theOperation)
1024 if (PartSet_SketcherMgr::isSketchOperation(theOperation)) {
1025 mySketchMgr->stopSketch(theOperation);
1029 //******************************************************
1030 void PartSet_Module::onBooleanOperationChange(int theOperation)
1032 ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
1035 ModuleBase_IPropertyPanel* aPanel = aOperation->propertyPanel();
1036 switch (theOperation) {
1038 aPanel->setWindowTitle(tr("Cut"));
1041 aPanel->setWindowTitle(tr("Fuse"));
1044 aPanel->setWindowTitle(tr("Common"));