src/PartSet/PartSet_Module.cpp

   1 // Copyright (C) 2014-20xx CEA/DEN, EDF R&D
   2
   3 #include "PartSet_Module.h"
   4 #include "PartSet_WidgetSketchLabel.h"
   5 #include "PartSet_Validators.h"
   6 #include "PartSet_Tools.h"
   7 #include "PartSet_PreviewPlanes.h"
   8 #include "PartSet_WidgetPoint2d.h"
   9 #include "PartSet_WidgetPoint2dDistance.h"
  10 #include "PartSet_WidgetPoint2DFlyout.h"
  11 #include "PartSet_WidgetShapeSelector.h"
  12 #include "PartSet_WidgetMultiSelector.h"
  13 #include "PartSet_WidgetEditor.h"
  14 #include "PartSet_WidgetFileSelector.h"
  15 #include "PartSet_WidgetSketchCreator.h"
  16 #include "PartSet_SketcherMgr.h"
  17 #include "PartSet_SketcherReetntrantMgr.h"
  18 #include "PartSet_ResultSketchPrs.h"
  19 #include "PartSet_MenuMgr.h"
  20 #include "PartSet_CustomPrs.h"
  21 #include "PartSet_IconFactory.h"
  22 #include "PartSet_WidgetChoice.h"
  23 #include "PartSet_OverconstraintListener.h"
  24
  25 #include "PartSet_Filters.h"
  26 #include "PartSet_FilterInfinite.h"
  27
  28 #include <PartSetPlugin_Remove.h>
  29 #include <PartSetPlugin_Part.h>
  30 #include <PartSetPlugin_Duplicate.h>
  31
  32 #include <ModuleBase_Operation.h>
  33 #include <ModuleBase_OperationAction.h>
  34 #include <ModuleBase_IViewer.h>
  35 #include <ModuleBase_IViewWindow.h>
  36 #include <ModuleBase_IPropertyPanel.h>
  37 #include <ModuleBase_WidgetEditor.h>
  38 #include <ModuleBase_WidgetValidated.h>
  39 #include <ModuleBase_FilterFactory.h>
  40 #include <ModuleBase_Tools.h>
  41 #include <ModuleBase_OperationFeature.h>
  42 #include <ModuleBase_WidgetFactory.h>
  43 #include <ModuleBase_OperationDescription.h>
  44 #include <ModuleBase_ViewerPrs.h>
  45
  46 #include <ModelAPI_Object.h>
  47 #include <ModelAPI_Events.h>
  48 #include <ModelAPI_Validator.h>
  49 #include <ModelAPI_Data.h>
  50 #include <ModelAPI_Session.h>
  51 #include <ModelAPI_ResultBody.h>
  52 #include <ModelAPI_AttributeString.h>
  53 #include <ModelAPI_AttributeSelectionList.h>
  54
  55 #include <GeomDataAPI_Point2D.h>
  56 #include <GeomDataAPI_Point.h>
  57 #include <GeomDataAPI_Dir.h>
  58
  59 #include <XGUI_Displayer.h>
  60 #include <XGUI_Workshop.h>
  61 #include <XGUI_OperationMgr.h>
  62 #include <XGUI_PropertyPanel.h>
  63 #include <XGUI_ModuleConnector.h>
  64 #include <XGUI_ContextMenuMgr.h>
  65 #include <XGUI_Tools.h>
  66 #include <XGUI_ObjectsBrowser.h>
  67 #include <XGUI_SelectionMgr.h>
  68 #include <XGUI_DataModel.h>
  69 #include <XGUI_ErrorMgr.h>
  70 #include <XGUI_CustomPrs.h>
  71
  72 #include <SketchPlugin_Feature.h>
  73 #include <SketchPlugin_Sketch.h>
  74 #include <SketchPlugin_ConstraintAngle.h>
  75 #include <SketchPlugin_ConstraintLength.h>
  76 #include <SketchPlugin_ConstraintDistance.h>
  77 #include <SketchPlugin_ConstraintParallel.h>
  78 #include <SketchPlugin_ConstraintPerpendicular.h>
  79 #include <SketchPlugin_ConstraintRadius.h>
  80
  81 #include <SketcherPrs_SymbolPrs.h>
  82 #include <SketcherPrs_Tools.h>
  83
  84 #include <Events_Loop.h>
  85 #include <Config_PropManager.h>
  86 #include <Config_Keywords.h>
  87
  88 #include <StdSelect_TypeOfFace.hxx>
  89 #include <TopoDS_Vertex.hxx>
  90 #include <TopoDS.hxx>
  91 #include <TopoDS_Shape.hxx>
  92 #include <BRep_Tool.hxx>
  93 #include <AIS_Dimension.hxx>
  94
  95 #include <QObject>
  96 #include <QMouseEvent>
  97 #include <QString>
  98 #include <QTimer>
  99 #include <QApplication>
 100 #include <QMessageBox>
 101 #include <QMainWindow>
 102 #include <QLineEdit>
 103 #include <QString>
 104
 105 #include <GeomAlgoAPI_FaceBuilder.h>
 106 #include <GeomDataAPI_Dir.h>
 107
 108 #include <SelectMgr_ListIteratorOfListOfFilter.hxx>
 109
 110 #ifdef _DEBUG
 111 #include <QDebug>
 112 #endif
 113
 114 /*!Create and return new instance of XGUI_Module*/
 115 extern "C" PARTSET_EXPORT ModuleBase_IModule* createModule(ModuleBase_IWorkshop* theWshop)
 116 {
 117   return new PartSet_Module(theWshop);
 118 }
 119
 120 PartSet_Module::PartSet_Module(ModuleBase_IWorkshop* theWshop)
 121 : ModuleBase_IModule(theWshop),
 122   myVisualLayerId(0)
 123 {
 124   new PartSet_IconFactory();
 125
 126   mySketchMgr = new PartSet_SketcherMgr(this);
 127   mySketchReentrantMgr = new PartSet_SketcherReetntrantMgr(theWshop);
 128
 129   XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(theWshop);
 130   XGUI_Workshop* aWorkshop = aConnector->workshop();
 131
 132   ModuleBase_IViewer* aViewer = theWshop->viewer();
 133   connect(aViewer, SIGNAL(keyRelease(ModuleBase_IViewWindow*, QKeyEvent*)),
 134           this, SLOT(onKeyRelease(ModuleBase_IViewWindow*, QKeyEvent*)));
 135   connect(aViewer, SIGNAL(viewTransformed(int)),
 136           SLOT(onViewTransformed(int)));
 137   connect(aViewer, SIGNAL(viewCreated(ModuleBase_IViewWindow*)),
 138           SLOT(onViewCreated(ModuleBase_IViewWindow*)));
 139   myMenuMgr = new PartSet_MenuMgr(this);
 140   myCustomPrs = new PartSet_CustomPrs(theWshop);
 141
 142   myOverconstraintListener = new PartSet_OverconstraintListener(theWshop);
 143
 144   Events_Loop* aLoop = Events_Loop::loop();
 145   aLoop->registerListener(this, Events_Loop::eventByName(EVENT_DOCUMENT_CHANGED));
 146
 147   mySelectionFilters.Append(new PartSet_GlobalFilter(myWorkshop));
 148   mySelectionFilters.Append(new PartSet_FilterInfinite(myWorkshop));
 149
 150   myHasConstraintShown[PartSet_Tools::Geometrical] = true;
 151   myHasConstraintShown[PartSet_Tools::Dimensional] = true;
 152   myHasConstraintShown[PartSet_Tools::Expressions] = false;
 153
 154   Config_PropManager::registerProp("Visualization", "operation_parameter_color",
 155                           "Reference shape wireframe color in operation", Config_Prop::Color,
 156                           PartSet_CustomPrs::OPERATION_PARAMETER_COLOR());
 157   Config_PropManager::registerProp("Visualization", "operation_result_color",
 158                           "Result shape wireframe color in operation", Config_Prop::Color,
 159                           PartSet_CustomPrs::OPERATION_RESULT_COLOR());
 160   Config_PropManager::registerProp("Visualization", "operation_highlight_color",
 161                           "Multi selector item color in operation", Config_Prop::Color,
 162                           PartSet_CustomPrs::OPERATION_HIGHLIGHT_COLOR());
 163 }
 164
 165 PartSet_Module::~PartSet_Module()
 166 {
 167   SelectMgr_ListIteratorOfListOfFilter aIt(mySelectionFilters);
 168   for (; aIt.More(); aIt.Next()) {
 169     Handle(SelectMgr_Filter) aFilter = aIt.Value();
 170     if (!aFilter.IsNull())
 171       aFilter.Nullify();
 172   }
 173   delete myCustomPrs;
 174   delete myOverconstraintListener;
 175 }
 176
 177 void PartSet_Module::activateSelectionFilters()
 178 {
 179   SelectMgr_ListIteratorOfListOfFilter aIt(mySelectionFilters);
 180   for (; aIt.More(); aIt.Next()) {
 181     Handle(SelectMgr_Filter) aFilter = aIt.Value();
 182     if (!aFilter.IsNull())
 183       myWorkshop->viewer()->addSelectionFilter(aFilter);
 184   }
 185 }
 186
 187 void PartSet_Module::deactivateSelectionFilters()
 188 {
 189   SelectMgr_ListIteratorOfListOfFilter aIt(mySelectionFilters);
 190   for (; aIt.More(); aIt.Next()) {
 191     Handle(SelectMgr_Filter) aFilter = aIt.Value();
 192     if (!aFilter.IsNull())
 193       myWorkshop->viewer()->removeSelectionFilter(aFilter);
 194   }
 195 }
 196
 197 void PartSet_Module::storeSelection()
 198 {
 199   sketchMgr()->storeSelection();
 200 }
 201
 202 void PartSet_Module::restoreSelection()
 203 {
 204   sketchMgr()->restoreSelection();
 205 }
 206
 207 void PartSet_Module::registerValidators()
 208 {
 209   //Registering of validators
 210   SessionPtr aMgr = ModelAPI_Session::get();
 211   ModelAPI_ValidatorsFactory* aFactory = aMgr->validators();
 212   aFactory->registerValidator("PartSet_DistanceSelection", new PartSet_DistanceSelection);
 213   aFactory->registerValidator("PartSet_LengthSelection", new PartSet_LengthSelection);
 214   aFactory->registerValidator("PartSet_PerpendicularSelection", new PartSet_PerpendicularSelection);
 215   aFactory->registerValidator("PartSet_ParallelSelection", new PartSet_ParallelSelection);
 216   aFactory->registerValidator("PartSet_RadiusSelection", new PartSet_RadiusSelection);
 217   aFactory->registerValidator("PartSet_RigidSelection", new PartSet_RigidSelection);
 218   aFactory->registerValidator("PartSet_CoincidentSelection", new PartSet_CoincidentSelection);
 219   aFactory->registerValidator("PartSet_HVDirSelection", new PartSet_HVDirSelection);
 220   aFactory->registerValidator("PartSet_TangentSelection", new PartSet_TangentSelection);
 221   aFactory->registerValidator("PartSet_FilletSelection", new PartSet_FilletSelection);
 222   aFactory->registerValidator("PartSet_AngleSelection", new PartSet_AngleSelection);
 223   aFactory->registerValidator("PartSet_EqualSelection", new PartSet_EqualSelection);
 224   aFactory->registerValidator("PartSet_CollinearSelection", new PartSet_CollinearSelection);
 225   aFactory->registerValidator("PartSet_MiddlePointSelection", new PartSet_MiddlePointSelection);
 226   aFactory->registerValidator("PartSet_DifferentObjects", new PartSet_DifferentObjectsValidator);
 227   aFactory->registerValidator("PartSet_CoincidentAttr", new PartSet_CoincidentAttr);
 228 }
 229
 230 void PartSet_Module::registerFilters()
 231 {
 232   //Registering of selection filters
 233   XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
 234   ModuleBase_FilterFactory* aFactory = aConnector->selectionFilters();
 235 }
 236
 237 void PartSet_Module::registerProperties()
 238 {
 239   Config_PropManager::registerProp("Sketch planes", "planes_size", "Size", Config_Prop::Double,
 240                                    PLANE_SIZE);
 241   Config_PropManager::registerProp("Sketch planes", "planes_thickness", "Thickness",
 242                                    Config_Prop::Integer, SKETCH_WIDTH);
 243   Config_PropManager::registerProp("Sketch planes", "rotate_to_plane", "Rotate to plane when selected",
 244     Config_Prop::Boolean, "false");
 245 }
 246
 247 void PartSet_Module::connectToPropertyPanel(ModuleBase_ModelWidget* theWidget, const bool isToConnect)
 248 {
 249   mySketchMgr->connectToPropertyPanel(theWidget, isToConnect);
 250 }
 251
 252 void PartSet_Module::operationCommitted(ModuleBase_Operation* theOperation)
 253 {
 254   if (PartSet_SketcherMgr::isNestedSketchOperation(theOperation)) {
 255     mySketchMgr->commitNestedSketch(theOperation);
 256   }
 257
 258   /// Restart sketcher operations automatically
 259   if (!mySketchReentrantMgr->operationCommitted(theOperation)) {
 260
 261     ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>(theOperation);
 262     if (aFOperation && !aFOperation->isEditOperation()) {
 263       // the selection is cleared after commit the create operation
 264       // in order to do not use the same selected objects in the restarted operation
 265       // for common behaviour, the selection is cleared even if the operation is not restarted
 266       getWorkshop()->selector()->clearSelection();
 267     }
 268   }
 269 }
 270
 271 void PartSet_Module::operationAborted(ModuleBase_Operation* theOperation)
 272 {
 273   /// Restart sketcher operations automatically
 274   mySketchReentrantMgr->operationAborted(theOperation);
 275 }
 276
 277 void PartSet_Module::operationStarted(ModuleBase_Operation* theOperation)
 278 {
 279   ModuleBase_IWorkshop* anIWorkshop = workshop();
 280   if (!theOperation->getDescription()->hasXmlRepresentation()) {  //!< No need for property panel
 281     anIWorkshop->updateCommandStatus();
 282   }
 283   else {
 284     ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>
 285                                                                                  (theOperation);
 286     if (aFOperation) {
 287       XGUI_Workshop* aWorkshop = XGUI_Tools::workshop(anIWorkshop);
 288       XGUI_PropertyPanel* aPropertyPanel = aWorkshop->propertyPanel();
 289       ModuleBase_ModelWidget* aFilledWidget = 0;
 290       bool aPostonedWidgetActivation = false;
 291       FeaturePtr aFeature = aFOperation->feature();
 292
 293       std::string aGreedAttributeId = ModuleBase_Tools::findGreedAttribute(anIWorkshop, aFeature);
 294       // if there is a greed attribute, automatic commit by preselection for this feature is prohibited
 295       aWorkshop->setPropertyPanel(aFOperation);
 296
 297       // filling the operation values by the current selection
 298       // if the operation can be committed after the controls filling, the method perform should
 299       // be stopped. Otherwise unnecessary presentations can be shown(e.g. operation prs in sketch)
 300       bool isOperationCommitted = false;
 301       if (!aFOperation->isEditOperation()) {
 302         aFilledWidget = aFOperation->activateByPreselection(aGreedAttributeId);
 303         if (currentOperation() != aFOperation)
 304           isOperationCommitted = true;
 305         else {
 306           if (aGreedAttributeId.empty()) {
 307             // a signal should be emitted before the next widget activation
 308             // because, the activation of the next widget will give a focus to the widget. As a result
 309             // the value of the widget is initialized. And commit may happens until the value is entered.
 310             if (aFilledWidget) {
 311               if (mySketchReentrantMgr->canBeCommittedByPreselection())
 312                 isOperationCommitted = mySketchMgr->operationActivatedByPreselection();
 313               // activate the next obligatory widget
 314               if (!isOperationCommitted)
 315                 aPropertyPanel->activateNextWidget(aFilledWidget);
 316             }
 317           }
 318           else { // there is a greed widget
 319             const QList<ModuleBase_ModelWidget*>& aWidgets = aPropertyPanel->modelWidgets();
 320             std::string aFirstAttributeId = aWidgets.front()->attributeID();
 321             // activate next widget after greeded if it is the first widget in the panel
 322             // else the first panel widget is already activated by operation start
 323             if (aFirstAttributeId == aGreedAttributeId)
 324               aPostonedWidgetActivation = true;
 325           }
 326         }
 327       } if (!isOperationCommitted) {
 328         anIWorkshop->updateCommandStatus();
 329         aWorkshop->connectToPropertyPanel(true);
 330         operationStartedInternal(aFOperation);
 331
 332         // the objects of the current operation should be deactivated
 333         QObjectPtrList anObjects;
 334         anObjects.append(aFeature);
 335         std::list<ResultPtr> aResults = aFeature->results();
 336         std::list<ResultPtr>::const_iterator aIt;
 337         for (aIt = aResults.begin(); aIt != aResults.end(); ++aIt) {
 338           anObjects.append(*aIt);
 339         }
 340         QObjectPtrList::const_iterator anIt = anObjects.begin(), aLast = anObjects.end();
 341         for (; anIt != aLast; anIt++)
 342           aWorkshop->deactivateActiveObject(*anIt, false);
 343         if (anObjects.size() > 0) {
 344           XGUI_Displayer* aDisplayer = aWorkshop->displayer();
 345           aDisplayer->updateViewer();
 346         }
 347       }
 348       if (aPostonedWidgetActivation) {
 349         // if the widget is an empty in the chain of activated widgets, the current operation
 350         // is restarted. It should be performed after functionality of the operation starting
 351         aPropertyPanel->activateNextWidget(aFilledWidget);
 352       }
 353     }
 354   }
 355 }
 356
 357 void PartSet_Module::operationStartedInternal(ModuleBase_Operation* theOperation)
 358 {
 359   /// Restart sketcher operations automatically
 360   mySketchReentrantMgr->operationStarted(theOperation);
 361
 362   if (PartSet_SketcherMgr::isSketchOperation(theOperation)) {
 363     mySketchMgr->startSketch(theOperation);
 364   }
 365   else if (PartSet_SketcherMgr::isNestedSketchOperation(theOperation)) {
 366     mySketchMgr->startNestedSketch(theOperation);
 367   }
 368
 369   ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>(theOperation);
 370   if (aFOperation) {
 371     myCustomPrs->activate(aFOperation->feature(), ModuleBase_IModule::CustomizeArguments, true);
 372     myCustomPrs->activate(aFOperation->feature(), ModuleBase_IModule::CustomizeResults, true);
 373   }
 374 }
 375
 376 void PartSet_Module::operationResumed(ModuleBase_Operation* theOperation)
 377 {
 378   ModuleBase_IModule::operationResumed(theOperation);
 379
 380   ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>(theOperation);
 381   if (aFOperation) {
 382     myCustomPrs->activate(aFOperation->feature(), ModuleBase_IModule::CustomizeArguments, true);
 383     myCustomPrs->activate(aFOperation->feature(), ModuleBase_IModule::CustomizeResults, true);
 384   }
 385 }
 386
 387 void PartSet_Module::operationStopped(ModuleBase_Operation* theOperation)
 388 {
 389   bool isModifiedArgs = myCustomPrs->deactivate(ModuleBase_IModule::CustomizeArguments, false);
 390   bool isModifiedResults = myCustomPrs->deactivate(ModuleBase_IModule::CustomizeResults, false);
 391   bool isModified = isModifiedArgs || isModifiedResults;
 392
 393   if (PartSet_SketcherMgr::isNestedSketchOperation(theOperation)) {
 394     mySketchMgr->stopNestedSketch(theOperation);
 395   }
 396
 397   //VSV: Viewer is updated on feature update and redisplay
 398   if (isModified) {
 399     XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(myWorkshop);
 400     XGUI_Displayer* aDisplayer = aConnector->workshop()->displayer();
 401     aDisplayer->updateViewer();
 402   }
 403
 404   QMap<PartSet_Tools::ConstraintVisibleState, bool>::const_iterator anIt = myHasConstraintShown.begin(),
 405                                                                     aLast = myHasConstraintShown.end();
 406   for (; anIt != aLast; anIt++) {
 407     myHasConstraintShown[anIt.key()];
 408     mySketchMgr->updateBySketchParameters(anIt.key(), anIt.value());
 409   }
 410 }
 411
 412 ModuleBase_Operation* PartSet_Module::currentOperation() const
 413 {
 414   XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
 415   XGUI_OperationMgr* anOpMgr = aConnector->workshop()->operationMgr();
 416   return anOpMgr->currentOperation();
 417 }
 418
 419 bool PartSet_Module::canUndo() const
 420 {
 421   bool aCanUndo = false;
 422   SessionPtr aMgr = ModelAPI_Session::get();
 423   if (aMgr->hasModuleDocument() && aMgr->canUndo()) {
 424     aCanUndo = !aMgr->isOperation();
 425     if (!aCanUndo) // check the enable state additionally by sketch manager
 426       aCanUndo = aMgr->canUndo();
 427   }
 428   return aCanUndo;
 429 }
 430
 431 bool PartSet_Module::canRedo() const
 432 {
 433   bool aCanRedo = false;
 434   SessionPtr aMgr = ModelAPI_Session::get();
 435   if (aMgr->hasModuleDocument() && aMgr->canRedo()) {
 436     aCanRedo = !aMgr->isOperation();
 437     if (!aCanRedo) // check the enable state additionally by sketch manager
 438       aCanRedo = aMgr->canRedo();
 439   }
 440   return aCanRedo;
 441 }
 442
 443 bool PartSet_Module::canApplyAction(const ObjectPtr& theObject, const QString& theActionId) const
 444 {
 445   bool aValid = true;
 446   if (theActionId == "MOVE_CMD") {
 447     FeaturePtr aFeature = ModelAPI_Feature::feature(theObject);
 448     if (aFeature) {
 449       // part features can not be moved in the history.
 450       if (aFeature->getKind() == PartSetPlugin_Part::ID())
 451         aValid = false;
 452     }
 453   }
 454   return aValid;
 455 }
 456
 457 bool PartSet_Module::canEraseObject(const ObjectPtr& theObject) const
 458 {
 459   // the sketch manager put the restriction to the objects erase
 460   return mySketchMgr->canEraseObject(theObject);
 461 }
 462
 463 bool PartSet_Module::canDisplayObject(const ObjectPtr& theObject) const
 464 {
 465   // the sketch manager put the restriction to the objects display
 466   return mySketchMgr->canDisplayObject(theObject);
 467 }
 468
 469 void PartSet_Module::processHiddenObject(const std::list<ObjectPtr>& theObjects)
 470 {
 471   mySketchMgr->processHiddenObject(theObjects);
 472 }
 473
 474 bool PartSet_Module::canActivateSelection(const ObjectPtr& theObject) const
 475 {
 476   bool aCanActivate = ModuleBase_IModule::canActivateSelection(theObject);
 477
 478   ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
 479   bool isSketchOp = PartSet_SketcherMgr::isSketchOperation(anOperation),
 480        isNestedOp = PartSet_SketcherMgr::isNestedSketchOperation(anOperation);
 481   if (isSketchOp || isNestedOp) {
 482     // in active sketch operation it is possible to activate operation object in selection
 483     // in the edit operation, e.g. points of the line can be moved when the line is edited
 484     ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>(anOperation);
 485     aCanActivate = aCanActivate || (aFOperation && aFOperation->isEditOperation());
 486   }
 487   return aCanActivate;
 488 }
 489
 490 bool PartSet_Module::addViewerMenu(const QMap<QString, QAction*>& theStdActions,
 491                                    QWidget* theParent,
 492                                    QMap<int, QAction*>& theMenuActions) const
 493 {
 494   return myMenuMgr->addViewerMenu(theStdActions, theParent, theMenuActions);
 495 }
 496
 497 void PartSet_Module::updateViewerMenu(const QMap<QString, QAction*>& theStdActions)
 498 {
 499   myMenuMgr->updateViewerMenu(theStdActions);
 500 }
 501
 502 QString PartSet_Module::getFeatureError(const FeaturePtr& theFeature)
 503 {
 504   QString anError = ModuleBase_IModule::getFeatureError(theFeature);
 505   if (anError.isEmpty())
 506     anError = sketchMgr()->getFeatureError(theFeature);
 507
 508   return anError;
 509 }
 510
 511 void PartSet_Module::grantedOperationIds(ModuleBase_Operation* theOperation,
 512                                          QStringList& theIds) const
 513 {
 514   myMenuMgr->grantedOperationIds(theOperation, theIds);
 515
 516   if (PartSet_SketcherMgr::isSketchOperation(theOperation)) {
 517     XGUI_Workshop* aWorkshop = getWorkshop();
 518     theIds.append(aWorkshop->contextMenuMgr()->action("DELETE_CMD")->text());
 519   }
 520 }
 521
 522 void PartSet_Module::activeSelectionModes(QIntList& theModes)
 523 {
 524   theModes.clear();
 525   if (mySketchMgr->activeSketch().get())
 526     PartSet_SketcherMgr::sketchSelectionModes(theModes);
 527 }
 528
 529 bool PartSet_Module::isMouseOverWindow()
 530 {
 531   return mySketchMgr->isMouseOverWindow();
 532 }
 533
 534 void PartSet_Module::closeDocument()
 535 {
 536   clearViewer();
 537 }
 538
 539 void PartSet_Module::clearViewer()
 540 {
 541   myCustomPrs->clearPrs();
 542
 543   XGUI_Workshop* aWorkshop = getWorkshop();
 544   XGUI_Displayer* aDisplayer = aWorkshop->displayer();
 545   aDisplayer->deactivateSelectionFilters();
 546 }
 547
 548 void PartSet_Module::propertyPanelDefined(ModuleBase_Operation* theOperation)
 549 {
 550   ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>(theOperation);
 551   if (!aFOperation)
 552     return;
 553
 554   ModuleBase_IPropertyPanel* aPanel = aFOperation->propertyPanel();
 555   // we have to manually activate the sketch label in edit mode
 556   if (PartSet_SketcherMgr::isSketchOperation(aFOperation) &&  (aFOperation->isEditOperation()))
 557     aPanel->activateWidget(aPanel->modelWidgets().first());
 558 }
 559
 560 bool PartSet_Module::createWidgets(ModuleBase_Operation* theOperation,
 561                                    QList<ModuleBase_ModelWidget*>& theWidgets) const
 562 {
 563   bool aProcessed = false;
 564
 565   ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>(theOperation);
 566   XGUI_Workshop* aWorkshop = getWorkshop();
 567   XGUI_PropertyPanel* aPropertyPanel = aWorkshop->propertyPanel();
 568   if (mySketchMgr->activeSketch().get() && aFOperation && aPropertyPanel) {
 569     ModuleBase_ISelection* aSelection = workshop()->selection();
 570     // click on a point in sketch leads here with the point is highlighted, not yet selected
 571     QList<ModuleBase_ViewerPrsPtr> aPreselection = aSelection->getHighlighted();
 572     if (aPreselection.size() == 1) {
 573       ModuleBase_ViewerPrsPtr aSelectedPrs = aPreselection[0];
 574       ObjectPtr anObject = aSelectedPrs->object();
 575
 576       FeaturePtr aFeature = ModelAPI_Feature::feature(anObject);
 577       FeaturePtr anOpFeature = aFOperation->feature();
 578       GeomShapePtr aShape = aSelectedPrs->shape();
 579       // click on the digit of dimension constrain comes here with an empty shape, so we need the check
 580       if (aFeature == anOpFeature && aShape.get() && !aShape->isNull()) {
 581         const TopoDS_Shape& aTDShape = aShape->impl<TopoDS_Shape>();
 582         AttributePtr anAttribute = PartSet_Tools::findAttributeBy2dPoint(anObject, aTDShape,
 583                                                                          mySketchMgr->activeSketch());
 584         if (anAttribute.get()) {
 585           QString aXmlRepr = aFOperation->getDescription()->xmlRepresentation();
 586           ModuleBase_WidgetFactory aFactory(aXmlRepr.toStdString(), workshop());
 587
 588           const std::string anAttributeId = anAttribute->id();
 589           aFactory.createWidget(aPropertyPanel->contentWidget(), anAttributeId);
 590
 591           theWidgets = aFactory.getModelWidgets();
 592           // it is possible that the point does not present in XML definition,
 593           // in this case, we assume that it is not processed by this module
 594           // e.g. "Intersection point" feature
 595           aProcessed = !theWidgets.isEmpty();
 596         }
 597       }
 598     }
 599   }
 600   return aProcessed;
 601 }
 602
 603 void PartSet_Module::onSelectionChanged()
 604 {
 605   ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
 606   if (!aOperation)
 607     return;
 608
 609   bool isSketcherOp = false;
 610   // An edit operation is enable only if the current opeation is the sketch operation
 611   if (mySketchMgr->activeSketch()) {
 612     if (PartSet_Tools::sketchPlane(mySketchMgr->activeSketch()))
 613       isSketcherOp = PartSet_SketcherMgr::isSketchOperation(aOperation);
 614   }
 615   if (isSketcherOp) {
 616     // Editing of constraints can be done on selection
 617     ModuleBase_ISelection* aSelect = myWorkshop->selection();
 618     QList<ModuleBase_ViewerPrsPtr> aSelected = aSelect->getSelected();
 619     if (aSelected.size() == 1) {
 620       ModuleBase_ViewerPrsPtr aPrs = aSelected.first();
 621       ObjectPtr aObject = aPrs->object();
 622       FeaturePtr aFeature = ModelAPI_Feature::feature(aObject);
 623       if (aFeature) {
 624         std::string aId = aFeature->getKind();
 625         if ((aId == SketchPlugin_ConstraintRadius::ID()) ||
 626             (aId == SketchPlugin_ConstraintLength::ID()) ||
 627             (aId == SketchPlugin_ConstraintDistance::ID()) ||
 628             (aId == SketchPlugin_ConstraintAngle::ID())) {
 629           editFeature(aFeature);
 630         }
 631       }
 632     }
 633   }
 634 }
 635
 636 void PartSet_Module::onKeyRelease(ModuleBase_IViewWindow* theWnd, QKeyEvent* theEvent)
 637 {
 638   XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
 639   XGUI_OperationMgr* anOpMgr = aConnector->workshop()->operationMgr();
 640   anOpMgr->onKeyReleased(theWnd->viewPort(), theEvent);
 641 }
 642
 643 ModuleBase_ModelWidget* PartSet_Module::createWidgetByType(const std::string& theType,
 644                                                            QWidget* theParent,
 645                                                            Config_WidgetAPI* theWidgetApi)
 646 {
 647   ModuleBase_IWorkshop* aWorkshop = workshop();
 648   XGUI_Workshop* aXUIWorkshop = getWorkshop();
 649   ModuleBase_ModelWidget* aWgt = NULL;
 650   if (theType == "sketch-start-label") {
 651     PartSet_WidgetSketchLabel* aLabelWgt = new PartSet_WidgetSketchLabel(theParent, aWorkshop,
 652                                                                theWidgetApi, myHasConstraintShown);
 653     connect(aLabelWgt, SIGNAL(planeSelected(const std::shared_ptr<GeomAPI_Pln>&)),
 654       mySketchMgr, SLOT(onPlaneSelected(const std::shared_ptr<GeomAPI_Pln>&)));
 655     connect(aLabelWgt, SIGNAL(showConstraintToggled(int, bool)),
 656       mySketchMgr, SLOT(onShowConstraintsToggle(int, bool)));
 657     aWgt = aLabelWgt;
 658   } else if (theType == "sketch-2dpoint_selector") {
 659     PartSet_WidgetPoint2D* aPointWgt = new PartSet_WidgetPoint2D(theParent, aWorkshop,
 660                                                                  theWidgetApi);
 661     aPointWgt->setSketch(mySketchMgr->activeSketch());
 662     connect(aPointWgt, SIGNAL(vertexSelected()), sketchReentranceMgr(), SLOT(onVertexSelected()));
 663     aWgt = aPointWgt;
 664   }else if (theType == "sketch-2dpoint_flyout_selector") {
 665     PartSet_WidgetPoint2DFlyout* aPointWgt = new PartSet_WidgetPoint2DFlyout(theParent, aWorkshop,
 666                                                                              theWidgetApi);
 667     aPointWgt->setSketch(mySketchMgr->activeSketch());
 668     connect(aPointWgt, SIGNAL(vertexSelected()), sketchReentranceMgr(), SLOT(onVertexSelected()));
 669     aWgt = aPointWgt;
 670   } else if (theType == "point2ddistance") {
 671     PartSet_WidgetPoint2dDistance* aDistanceWgt = new PartSet_WidgetPoint2dDistance(theParent,
 672                                                                      aWorkshop, theWidgetApi);
 673     aDistanceWgt->setSketch(mySketchMgr->activeSketch());
 674     aWgt = aDistanceWgt;
 675   } else if (theType == "sketch_shape_selector") {
 676     PartSet_WidgetShapeSelector* aShapeSelectorWgt =
 677                           new PartSet_WidgetShapeSelector(theParent, aWorkshop, theWidgetApi);
 678     aShapeSelectorWgt->setSketcher(mySketchMgr->activeSketch());
 679     aWgt = aShapeSelectorWgt;
 680   } else if (theType == "sketch_multi_selector") {
 681     PartSet_WidgetMultiSelector* aShapeSelectorWgt =
 682                           new PartSet_WidgetMultiSelector(theParent, aWorkshop, theWidgetApi);
 683     aShapeSelectorWgt->setSketcher(mySketchMgr->activeSketch());
 684     aWgt = aShapeSelectorWgt;
 685   }
 686   else if (theType == WDG_DOUBLEVALUE_EDITOR) {
 687     aWgt = new PartSet_WidgetEditor(theParent, aWorkshop, theWidgetApi);
 688   } else if (theType == "export_file_selector") {
 689     aWgt = new PartSet_WidgetFileSelector(theParent, aWorkshop, theWidgetApi);
 690   } else if (theType == "sketch_launcher") {
 691     aWgt = new PartSet_WidgetSketchCreator(theParent, this, theWidgetApi);
 692   } else if (theType == "module_choice") {
 693     aWgt = new PartSet_WidgetChoice(theParent, theWidgetApi);
 694     connect(aWgt, SIGNAL(itemSelected(ModuleBase_ModelWidget*, int)),
 695             this, SLOT(onChoiceChanged(ModuleBase_ModelWidget*, int)));
 696   }
 697   return aWgt;
 698 }
 699
 700 ModuleBase_ModelWidget* PartSet_Module::activeWidget() const
 701 {
 702   ModuleBase_ModelWidget* anActiveWidget = 0;
 703
 704   anActiveWidget = mySketchReentrantMgr->internalActiveWidget();
 705   if (!anActiveWidget) {
 706     ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
 707     if (aOperation) {
 708       ModuleBase_IPropertyPanel* aPanel = aOperation->propertyPanel();
 709       anActiveWidget = aPanel->activeWidget();
 710     }
 711   }
 712   return anActiveWidget;
 713 }
 714
 715 bool PartSet_Module::deleteObjects()
 716 {
 717   bool isProcessed = false;
 718
 719   XGUI_Workshop* aWorkshop = getWorkshop();
 720   XGUI_OperationMgr* anOpMgr = aWorkshop->operationMgr();
 721
 722   //SessionPtr aMgr = ModelAPI_Session::get();
 723   // 1. check whether the delete should be processed in the module
 724   ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
 725   bool isSketchOp = PartSet_SketcherMgr::isSketchOperation(anOperation),
 726        isNestedOp = PartSet_SketcherMgr::isNestedSketchOperation(anOperation);
 727   if (isSketchOp || isNestedOp) {
 728     isProcessed = true;
 729     // 2. find selected presentations
 730     // selected objects should be collected before the current operation abort because
 731     // the abort leads to selection lost on constraint objects. It can be corrected after #386 issue
 732     ModuleBase_ISelection* aSel = workshop()->selection();
 733     QObjectPtrList aSelectedObj = aSel->selectedPresentations();
 734     // if there are no selected objects in the viewer, that means that the selection in another
 735     // place cased this method. It is necessary to return the false value to understande in above
 736     // method that delete is not processed
 737     if (aSelectedObj.count() == 0)
 738       return false;
 739
 740     // avoid delete of the objects, which are not belong to the current sketch
 741     // in order to do not delete results of other sketches
 742     QObjectPtrList aSketchObjects;
 743     QObjectPtrList::const_iterator anIt = aSelectedObj.begin(), aLast = aSelectedObj.end();
 744     for ( ; anIt != aLast; anIt++) {
 745       ObjectPtr anObject = *anIt;
 746       if (mySketchMgr->isObjectOfSketch(anObject)) {
 747         // sketch feature should be used in this list because workshop deletes features only
 748         // results are skipped
 749         FeaturePtr aSketchFeature = ModelAPI_Feature::feature(anObject);
 750         aSketchObjects.append(aSketchFeature);
 751       }
 752     }
 753     // if the selection contains only local selected presentations from other sketches,
 754     // the Delete operation should not be done at all
 755     if (aSketchObjects.size() == 0)
 756       return true;
 757
 758     // 3. start operation
 759     QString aDescription = aWorkshop->contextMenuMgr()->action("DELETE_CMD")->text();
 760     ModuleBase_OperationAction* anOpAction = new ModuleBase_OperationAction(aDescription, this);
 761
 762     // the active nested sketch operation should be aborted unconditionally
 763     // the Delete action should be additionally granted for the Sketch operation
 764     // in order to do not abort/commit it
 765     if (!anOpMgr->canStartOperation(anOpAction->id()))
 766       return true; // the objects are processed but can not be deleted
 767
 768     anOpMgr->startOperation(anOpAction);
 769
 770     // 4. delete features
 771     // sketch feature should be skipped, only sub-features can be removed
 772     // when sketch operation is active
 773     aWorkshop->deleteFeatures(aSketchObjects);
 774     // 5. stop operation
 775     anOpMgr->commitOperation();
 776   }
 777   return isProcessed;
 778 }
 779
 780 void PartSet_Module::onFeatureTriggered()
 781 {
 782   QAction* aCmd = dynamic_cast<QAction*>(sender());
 783   if (aCmd->isCheckable() && aCmd->isChecked()) {
 784     // 1. check whether the delete should be processed in the module
 785     ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
 786     bool isNestedOp = PartSet_SketcherMgr::isNestedCreateOperation(anOperation);
 787     if (isNestedOp) {
 788       // in case if in the viewer nothing is displayed, the create operation should not be
 789       // comitted even if all values of the feature are initialized
 790       if (!mySketchMgr->canDisplayCurrentCreatedFeature()) {
 791         // the action information should be saved before the operation is aborted
 792         // because this abort leads to update command status, which unchecks this action
 793         anOperation->abort();
 794         launchOperation(aCmd->data().toString());
 795       }
 796     }
 797   }
 798   ModuleBase_IModule::onFeatureTriggered();
 799 }
 800
 801 void PartSet_Module::editFeature(FeaturePtr theFeature)
 802 {
 803   storeConstraintsState(theFeature->getKind());
 804   ModuleBase_IModule::editFeature(theFeature);
 805 }
 806
 807 bool PartSet_Module::canCommitOperation() const
 808 {
 809   return true;
 810 }
 811
 812 void PartSet_Module::launchOperation(const QString& theCmdId)
 813 {
 814   storeConstraintsState(theCmdId.toStdString());
 815   ModuleBase_IModule::launchOperation(theCmdId);
 816 }
 817
 818 void PartSet_Module::storeConstraintsState(const std::string& theFeatureKind)
 819 {
 820   if (myWorkshop->currentOperation() &&
 821       myWorkshop->currentOperation()->id().toStdString() == SketchPlugin_Sketch::ID()) {
 822     const QMap<PartSet_Tools::ConstraintVisibleState, bool>& aShownStates =
 823                                                   mySketchMgr->showConstraintStates();
 824     myHasConstraintShown = aShownStates;
 825   }
 826   if (PartSet_SketcherMgr::constraintsIdList().contains(theFeatureKind.c_str())) {
 827     // Show constraints if a constraint was anOperation
 828     mySketchMgr->updateBySketchParameters(PartSet_Tools::Geometrical, true);
 829     mySketchMgr->updateBySketchParameters(PartSet_Tools::Dimensional, true);
 830     mySketchMgr->updateBySketchParameters(PartSet_Tools::Expressions,
 831                                           myHasConstraintShown[PartSet_Tools::Expressions]);
 832   }
 833 }
 834
 835 void PartSet_Module::onObjectDisplayed(ObjectPtr theObject, AISObjectPtr theAIS)
 836 {
 837   Handle(AIS_InteractiveObject) anAIS = theAIS->impl<Handle(AIS_InteractiveObject)>();
 838   if (!anAIS.IsNull()) {
 839     Handle(AIS_InteractiveContext) aCtx = anAIS->GetContext();
 840     Handle(AIS_Dimension) aDim = Handle(AIS_Dimension)::DownCast(anAIS);
 841     if (!aDim.IsNull()) {
 842       aCtx->SetZLayer(aDim, myVisualLayerId);
 843     } else {
 844       Handle(SketcherPrs_SymbolPrs) aCons = Handle(SketcherPrs_SymbolPrs)::DownCast(anAIS);
 845       if (!aCons.IsNull())
 846         aCtx->SetZLayer(aCons, myVisualLayerId);
 847     }
 848   }
 849 }
 850
 851 void PartSet_Module::onBeforeObjectErase(ObjectPtr theObject, AISObjectPtr theAIS)
 852 {
 853   // this is obsolete
 854   // it should be recomputed in order to disappear in the viewer if the corresponded object
 855   // is erased
 856   //if (myCustomPrs->isActive())
 857   //  myCustomPrs->redisplay(theObject, false);
 858 }
 859
 860 void PartSet_Module::onViewTransformed(int theTrsfType)
 861 {
 862   // Set length of arrows constant in pixel size
 863   // if the operation is panning or rotate or panglobal then do nothing
 864   if ((theTrsfType == 1) || (theTrsfType == 3) || (theTrsfType == 4))
 865     return;
 866   ModuleBase_IViewer* aViewer = myWorkshop->viewer();
 867   Handle(AIS_InteractiveContext) aContext = aViewer->AISContext();
 868   if (aContext.IsNull())
 869     return;
 870
 871   //Handle(V3d_View) aView = aViewer->activeView();
 872
 873   XGUI_Workshop* aWorkshop = getWorkshop();
 874   XGUI_Displayer* aDisplayer = aWorkshop->displayer();
 875   Handle(V3d_Viewer) aV3dViewer = aContext->CurrentViewer();
 876   Handle(V3d_View) aView;
 877   double aScale = 0;
 878   for (aV3dViewer->InitDefinedViews();
 879        aV3dViewer->MoreDefinedViews();
 880        aV3dViewer->NextDefinedViews()) {
 881     Handle(V3d_View) aV = aV3dViewer->DefinedView();
 882     double aS = aV->Scale();
 883     if (aS > aScale) {
 884       aScale = aS;
 885       aView = aV;
 886     }
 887   }
 888   if (aView.IsNull())
 889     return;
 890   double aLen = aView->Convert(SketcherPrs_Tools::getDefaultArrowSize());
 891
 892   double aPrevLen = SketcherPrs_Tools::getArrowSize();
 893   SketcherPrs_Tools::setArrowSize(aLen);
 894   const double aPrevScale = aViewer->Scale(aViewer->activeView());
 895   const double aCurScale = aViewer->activeView()->Camera()->Scale();
 896   aViewer->SetScale(aViewer->activeView(), aCurScale);
 897   SketcherPrs_Tools::setTextHeight (aCurScale / aPrevScale * SketcherPrs_Tools::getTextHeight());
 898   bool isModified = false;
 899   QList<AISObjectPtr> aPrsList = aDisplayer->displayedPresentations();
 900   foreach (AISObjectPtr aAIS, aPrsList) {
 901     Handle(AIS_InteractiveObject) aAisObj = aAIS->impl<Handle(AIS_InteractiveObject)>();
 902
 903     Handle(AIS_Dimension) aDim = Handle(AIS_Dimension)::DownCast(aAisObj);
 904     if (!aDim.IsNull()) {
 905       aDim->DimensionAspect()->ArrowAspect()->SetLength(aLen);
 906       aContext->Redisplay(aDim, false);
 907       isModified = true;
 908     }
 909   }
 910   if (isModified)
 911     aDisplayer->updateViewer();
 912 }
 913
 914 void PartSet_Module::activateCustomPrs(const FeaturePtr& theFeature, const ModuleBase_CustomizeFlag& theFlag,
 915                                        const bool theUpdateViewer)
 916 {
 917   myCustomPrs->activate(theFeature, theFlag, theUpdateViewer);
 918 }
 919
 920 void PartSet_Module::deactivateCustomPrs(const ModuleBase_CustomizeFlag& theFlag,
 921                                          const bool theUpdateViewer)
 922 {
 923   myCustomPrs->deactivate(theFlag, theUpdateViewer);
 924 }
 925
 926 bool PartSet_Module::customisePresentation(ResultPtr theResult, AISObjectPtr thePrs,
 927                                            std::shared_ptr<GeomAPI_ICustomPrs> theCustomPrs)
 928 {
 929   bool aCustomized = false;
 930
 931   if (theResult.get())
 932     return aCustomized;
 933
 934   XGUI_Workshop* aWorkshop = getWorkshop();
 935   XGUI_Displayer* aDisplayer = aWorkshop->displayer();
 936   ObjectPtr anObject = aDisplayer->getObject(thePrs);
 937   if (anObject.get()) {
 938     bool isConflicting = myOverconstraintListener->isConflictingObject(anObject);
 939     // customize sketch symbol presentation
 940     if (thePrs.get()) {
 941       Handle(AIS_InteractiveObject) anAISIO = thePrs->impl<Handle(AIS_InteractiveObject)>();
 942       if (!anAISIO.IsNull()) {
 943         if (!Handle(SketcherPrs_SymbolPrs)::DownCast(anAISIO).IsNull()) {
 944           Handle(SketcherPrs_SymbolPrs) aPrs = Handle(SketcherPrs_SymbolPrs)::DownCast(anAISIO);
 945           if (!aPrs.IsNull()) {
 946             std::vector<int> aColor;
 947             myOverconstraintListener->getConflictingColor(aColor);
 948             aPrs->SetConflictingConstraint(isConflicting, aColor);
 949             aCustomized = true;
 950           }
 951         }
 952       }
 953     }
 954     // customize sketch dimension constraint presentation
 955     if (!aCustomized) {
 956       std::vector<int> aColor;
 957       if (isConflicting) {
 958         myOverconstraintListener->getConflictingColor(aColor);
 959       }
 960       if (aColor.empty())
 961         XGUI_CustomPrs::getDefaultColor(anObject, true, aColor);
 962       if (!aColor.empty()) {
 963         thePrs->setColor(aColor[0], aColor[1], aColor[2]);
 964         aCustomized = true;
 965       }
 966     }
 967
 968     // customize dimentional constrains
 969     sketchMgr()->customizePresentation(anObject);
 970   }
 971
 972   return aCustomized;
 973 }
 974
 975 bool PartSet_Module::customizeObject(ObjectPtr theObject, const ModuleBase_CustomizeFlag& theFlag,
 976                                      const bool theUpdateViewer)
 977 {
 978   bool isRedisplayed = false;
 979   if (myCustomPrs->isActive(theFlag))
 980     isRedisplayed = myCustomPrs->redisplay(theObject, theFlag, theUpdateViewer);
 981
 982   return isRedisplayed;
 983 }
 984
 985 void PartSet_Module::customizeObjectBrowser(QWidget* theObjectBrowser)
 986 {
 987   XGUI_ObjectsBrowser* aOB = dynamic_cast<XGUI_ObjectsBrowser*>(theObjectBrowser);
 988   if (aOB) {
 989     QLabel* aLabel = aOB->activeDocLabel();
 990     aLabel->installEventFilter(myMenuMgr);
 991     connect(aLabel, SIGNAL(customContextMenuRequested(const QPoint&)),
 992           SLOT(onActiveDocPopup(const QPoint&)));
 993     //QPalette aPalet = aLabel->palette();
 994     //aPalet.setColor(QPalette::Text, QColor(0, 72, 140));
 995     //aLabel->setPalette(aPalet);
 996     aOB->treeView()->setExpandsOnDoubleClick(false);
 997     connect(aOB->treeView(), SIGNAL(doubleClicked(const QModelIndex&)),
 998       SLOT(onTreeViewDoubleClick(const QModelIndex&)));
 999   }
1000 }
1001
1002 void PartSet_Module::onActiveDocPopup(const QPoint& thePnt)
1003 {
1004   SessionPtr aMgr = ModelAPI_Session::get();
1005   QAction* aActivatePartAction = myMenuMgr->action("ACTIVATE_PARTSET_CMD");
1006
1007   XGUI_Workshop* aWorkshop = getWorkshop();
1008   QLabel* aHeader = aWorkshop->objectBrowser()->activeDocLabel();
1009
1010   aActivatePartAction->setEnabled((aMgr->activeDocument() != aMgr->moduleDocument()));
1011
1012   QMenu aMenu;
1013   aMenu.addAction(aActivatePartAction);
1014   aMenu.exec(aHeader->mapToGlobal(thePnt));
1015 }
1016
1017 Handle(AIS_InteractiveObject) PartSet_Module::createPresentation(const ResultPtr& theResult)
1018 {
1019   return mySketchMgr->createPresentation(theResult);
1020 }
1021
1022
1023 ObjectPtr PartSet_Module::findPresentedObject(const AISObjectPtr& theAIS) const
1024 {
1025   ObjectPtr anObject;
1026   ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
1027   if (aOperation) {
1028     /// If last line finished on vertex the lines creation sequence has to be break
1029     ModuleBase_IPropertyPanel* aPanel = aOperation->propertyPanel();
1030     if (aPanel) {
1031       ModuleBase_ModelWidget* anActiveWidget = aPanel->activeWidget();
1032       // if there is an active widget, find the presented object in it
1033       if (!anActiveWidget)
1034         anActiveWidget = aPanel->preselectionWidget();
1035
1036       ModuleBase_WidgetValidated* aWidgetValidated = dynamic_cast<ModuleBase_WidgetValidated*>
1037                                                                              (anActiveWidget);
1038       if (aWidgetValidated)
1039         anObject = aWidgetValidated->findPresentedObject(theAIS);
1040     }
1041   }
1042   return anObject;
1043 }
1044
1045 bool PartSet_Module::canBeShaded(Handle(AIS_InteractiveObject) theAIS) const
1046 {
1047   bool aCanBeShaged = true;
1048
1049   Handle(PartSet_ResultSketchPrs) aPrs = Handle(PartSet_ResultSketchPrs)::DownCast(theAIS);
1050   if (!aPrs.IsNull())
1051     aCanBeShaged = false;
1052
1053   return aCanBeShaged;
1054 }
1055
1056 void PartSet_Module::addObjectBrowserMenu(QMenu* theMenu) const
1057 {
1058   QObjectPtrList aObjects = myWorkshop->selection()->selectedObjects();
1059   int aSelected = aObjects.size();
1060   SessionPtr aMgr = ModelAPI_Session::get();
1061   QAction* aActivatePartAction = myMenuMgr->action("ACTIVATE_PART_CMD");
1062
1063   ModuleBase_Operation* aCurrentOp = myWorkshop->currentOperation();
1064   if (aSelected == 1) {
1065     bool hasResult = false;
1066     bool hasFeature = false;
1067     bool hasParameter = false;
1068     bool hasCompositeOwner = false;
1069     ModuleBase_Tools::checkObjects(aObjects, hasResult, hasFeature, hasParameter,
1070                                    hasCompositeOwner);
1071     ObjectPtr aObject = aObjects.first();
1072     if (aObject) {
1073       ResultPartPtr aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aObject);
1074       FeaturePtr aFeature = std::dynamic_pointer_cast<ModelAPI_Feature>(aObject);
1075       bool isPart = aPart.get() ||
1076         (aFeature.get() && (aFeature->getKind() == PartSetPlugin_Part::ID()));
1077       if (isPart) {
1078         DocumentPtr aPartDoc;
1079         if (!aPart.get()) {
1080           aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aFeature->firstResult());
1081         }
1082         if (aPart.get()) // this may be null is Part feature is disabled
1083           aPartDoc = aPart->partDoc();
1084
1085         theMenu->addAction(aActivatePartAction);
1086         aActivatePartAction->setEnabled((aMgr->activeDocument() != aPartDoc));
1087
1088       } else if (aObject->document() == aMgr->activeDocument()) {
1089         if (hasParameter || hasFeature) {
1090           myMenuMgr->action("EDIT_CMD")->setEnabled(true);
1091           theMenu->addAction(myMenuMgr->action("EDIT_CMD"));
1092           if (aCurrentOp && aFeature.get()) {
1093             if (aCurrentOp->id().toStdString() == aFeature->getKind())
1094               myMenuMgr->action("EDIT_CMD")->setEnabled(false);
1095           }
1096         }
1097       }
1098
1099       ResultBodyPtr aResult = std::dynamic_pointer_cast<ModelAPI_ResultBody>(aObject);
1100       if( aResult.get() )
1101         theMenu->addAction(myMenuMgr->action("SELECT_PARENT_CMD"));
1102     }
1103   }
1104   bool aNotDeactivate = (aCurrentOp == 0);
1105   if (!aNotDeactivate) {
1106     aActivatePartAction->setEnabled(false);
1107   }
1108 }
1109
1110 void PartSet_Module::processEvent(const std::shared_ptr<Events_Message>& theMessage)
1111 {
1112   if (theMessage->eventID() == Events_Loop::loop()->eventByName(EVENT_DOCUMENT_CHANGED)) {
1113     // Do not change activation of parts if an operation active
1114     static QStringList aAllowActivationList;
1115     if (aAllowActivationList.isEmpty())
1116       aAllowActivationList <<
1117       QString(PartSetPlugin_Part::ID().c_str()) <<
1118       QString(PartSetPlugin_Duplicate::ID().c_str()) <<
1119       QString(PartSetPlugin_Remove::ID().c_str());
1120     if (myWorkshop->currentOperation() &&
1121       (!aAllowActivationList.contains(myWorkshop->currentOperation()->id())))
1122       return;
1123     XGUI_Workshop* aWorkshop = getWorkshop();
1124     XGUI_DataTree* aTreeView = aWorkshop->objectBrowser()->treeView();
1125     QLabel* aLabel = aWorkshop->objectBrowser()->activeDocLabel();
1126     QPalette aPalet = aLabel->palette();
1127
1128     SessionPtr aMgr = ModelAPI_Session::get();
1129     DocumentPtr aActiveDoc = aMgr->activeDocument();
1130     if (aActivePartIndex.isValid())
1131       aTreeView->setExpanded(aActivePartIndex, false);
1132     XGUI_DataModel* aDataModel = aWorkshop->objectBrowser()->dataModel();
1133     aActivePartIndex = aDataModel->documentRootIndex(aActiveDoc);
1134     if (aActivePartIndex.isValid())
1135       aTreeView->setExpanded(aActivePartIndex, true);
1136
1137     aLabel->setPalette(aPalet);
1138     aWorkshop->updateCommandStatus();
1139
1140     // Update displayed objects in order to update active color
1141     XGUI_Displayer* aDisplayer = aWorkshop->displayer();
1142     QObjectPtrList aObjects = aDisplayer->displayedObjects();
1143     bool aHidden;
1144     foreach(ObjectPtr aObj, aObjects) {
1145       //TODO: replace by redisplay event.
1146       aHidden = !aObj->data() || !aObj->data()->isValid() ||
1147         aObj->isDisabled() || (!aObj->isDisplayed());
1148       if (!aHidden)
1149         aDisplayer->redisplay(aObj, false);
1150     }
1151     aDisplayer->updateViewer();
1152   }
1153 }
1154
1155 void PartSet_Module::onTreeViewDoubleClick(const QModelIndex& theIndex)
1156 {
1157   if (myWorkshop->currentOperation()) // Do not change activation of parts if an operation active
1158     return;
1159   SessionPtr aMgr = ModelAPI_Session::get();
1160   if (!theIndex.isValid()) {
1161     aMgr->setActiveDocument(aMgr->moduleDocument());
1162     return;
1163   }
1164   if (theIndex.column() != 0) // Use only first column
1165     return;
1166
1167   XGUI_Workshop* aWorkshop = getWorkshop();
1168   XGUI_DataModel* aDataModel = aWorkshop->objectBrowser()->dataModel();
1169   // De not use non editable Indexes
1170   if ((aDataModel->flags(theIndex) & Qt::ItemIsSelectable) == 0)
1171     return;
1172   ObjectPtr aObj = aDataModel->object(theIndex);
1173
1174   ResultPartPtr aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aObj);
1175   if (!aPart.get()) { // Probably this is Feature
1176     FeaturePtr aPartFeature = std::dynamic_pointer_cast<ModelAPI_Feature>(aObj);
1177     if (aPartFeature.get() && (aPartFeature->getKind() == PartSetPlugin_Part::ID())) {
1178       aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aPartFeature->firstResult());
1179     }
1180   }
1181   if (aPart.get()) { // if this is a part
1182     if (aPart->partDoc() == aMgr->activeDocument()) {
1183       myMenuMgr->activatePartSet();
1184     } else {
1185       aPart->activate();
1186     }
1187   }
1188 }
1189
1190
1191 void PartSet_Module::onViewCreated(ModuleBase_IViewWindow*)
1192 {
1193   // z layer is created for all started operations in order to visualize operation AIS presentation
1194   // over the object
1195   Handle(AIS_InteractiveContext) aContext = myWorkshop->viewer()->AISContext();
1196   if (aContext.IsNull())
1197     return;
1198
1199   Handle(V3d_Viewer) aViewer = aContext->CurrentViewer();
1200   if (myVisualLayerId == 0) {
1201     if (myVisualLayerId == 0)
1202       aViewer->AddZLayer(myVisualLayerId);
1203   } else {
1204     TColStd_SequenceOfInteger aZList;
1205     aViewer->GetAllZLayers(aZList);
1206     bool aFound = false;
1207     for (int i = 1; i <= aZList.Length(); i++) {
1208       if (aZList(i) == myVisualLayerId) {
1209         aFound = true;
1210         break;
1211       }
1212     }
1213     if (!aFound)
1214       aViewer->AddZLayer(myVisualLayerId);
1215   }
1216   // if there is an active operation with validated widget,
1217   // the filters of this widget should be activated in the created view
1218   ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
1219   if (aOperation) {
1220     ModuleBase_ModelWidget* anActiveWidget = activeWidget();
1221     if (anActiveWidget) {
1222       ModuleBase_WidgetSelector* aWSelector = dynamic_cast<ModuleBase_WidgetSelector*>(anActiveWidget);
1223       if (aWSelector)
1224         aWSelector->activateSelectionAndFilters(true);
1225     }
1226   }
1227 }
1228
1229 //******************************************************
1230 void PartSet_Module::widgetStateChanged(int thePreviousState)
1231 {
1232   mySketchMgr->widgetStateChanged(thePreviousState);
1233 }
1234
1235 bool PartSet_Module::processEnter(const std::string& thePreviousAttributeID)
1236 {
1237   return mySketchReentrantMgr->processEnter(thePreviousAttributeID);
1238 }
1239
1240 //******************************************************
1241 void PartSet_Module::beforeOperationStarted(ModuleBase_Operation* theOperation)
1242 {
1243 }
1244
1245 //******************************************************
1246 void PartSet_Module::beforeOperationStopped(ModuleBase_Operation* theOperation)
1247 {
1248   if (PartSet_SketcherMgr::isSketchOperation(theOperation)) {
1249     mySketchMgr->stopSketch(theOperation);
1250   }
1251 }
1252
1253 //******************************************************
1254 GeomShapePtr PartSet_Module::findShape(const AttributePtr& theAttribute)
1255 {
1256   GeomShapePtr aGeomShape;
1257
1258   ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
1259   if (anOperation && PartSet_SketcherMgr::isNestedSketchOperation(anOperation)) {
1260     aGeomShape = PartSet_Tools::findShapeBy2DPoint(theAttribute, myWorkshop);
1261   }
1262   return aGeomShape;
1263 }
1264
1265 //******************************************************
1266 AttributePtr PartSet_Module::findAttribute(const ObjectPtr& theObject,
1267                                            const GeomShapePtr& theGeomShape)
1268 {
1269   AttributePtr anAttribute;
1270   GeomShapePtr aGeomShape = theGeomShape;
1271   if (!aGeomShape.get()) {
1272     // processing shape of result, e.g. sketch circle center is selected, this is a result
1273     // the geom shape is empty, the shape of result should be used
1274     ResultPtr aResult = std::dynamic_pointer_cast<ModelAPI_Result>(theObject);
1275     if (aResult.get()) {
1276       aGeomShape = aResult->shape();
1277     }
1278   }
1279
1280   if (aGeomShape.get()) {
1281     TopoDS_Shape aTDSShape = aGeomShape->impl<TopoDS_Shape>();
1282     return PartSet_Tools::findAttributeBy2dPoint(theObject, aTDSShape,
1283                                                  mySketchMgr->activeSketch());
1284   }
1285   return anAttribute;
1286 }
1287
1288 //******************************************************
1289 void PartSet_Module::onChoiceChanged(ModuleBase_ModelWidget* theWidget,
1290                                      int theIndex)
1291 {
1292   PartSet_WidgetChoice* aChoiceWidget = dynamic_cast<PartSet_WidgetChoice*>(theWidget);
1293   if (!aChoiceWidget)
1294     return;
1295
1296   QString aChoiceTitle = aChoiceWidget->getPropertyPanelTitle(theIndex);
1297   if (!aChoiceTitle.isEmpty()) {
1298     ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
1299     if (!aOperation)
1300       return;
1301     ModuleBase_IPropertyPanel* aPanel = aOperation->propertyPanel();
1302     aPanel->setWindowTitle(aChoiceTitle);
1303   }
1304 }
1305
1306 //******************************************************
1307 XGUI_Workshop* PartSet_Module::getWorkshop() const
1308 {
1309   XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
1310   return aConnector->workshop();
1311 }