1 // Copyright (C) 2014-20xx CEA/DEN, EDF R&D
3 #include "PartSet_Module.h"
4 #include "PartSet_WidgetSketchLabel.h"
5 #include "PartSet_Validators.h"
6 #include "PartSet_Tools.h"
7 #include "PartSet_PreviewPlanes.h"
8 #include "PartSet_WidgetPoint2d.h"
9 #include "PartSet_WidgetPoint2dDistance.h"
10 #include "PartSet_WidgetPoint2DFlyout.h"
11 #include "PartSet_WidgetShapeSelector.h"
12 #include "PartSet_WidgetMultiSelector.h"
13 #include "PartSet_WidgetMultiSelectorComposite.h"
14 #include "PartSet_WidgetEditor.h"
15 #include "PartSet_WidgetFileSelector.h"
16 #include "PartSet_WidgetSketchCreator.h"
17 #include "PartSet_SketcherMgr.h"
18 #include "PartSet_SketcherReetntrantMgr.h"
19 #include "PartSet_ResultSketchPrs.h"
20 #include "PartSet_MenuMgr.h"
21 #include "PartSet_CustomPrs.h"
22 #include "PartSet_IconFactory.h"
23 #include "PartSet_WidgetChoice.h"
24 #include "PartSet_OverconstraintListener.h"
26 #include "PartSet_Filters.h"
27 #include "PartSet_FilterInfinite.h"
29 #include <PartSetPlugin_Remove.h>
30 #include <PartSetPlugin_Part.h>
31 #include <PartSetPlugin_Duplicate.h>
33 #include <ModuleBase_Operation.h>
34 #include <ModuleBase_OperationAction.h>
35 #include <ModuleBase_IViewer.h>
36 #include <ModuleBase_IViewWindow.h>
37 #include <ModuleBase_IPropertyPanel.h>
38 #include <ModuleBase_WidgetEditor.h>
39 #include <ModuleBase_WidgetValidated.h>
40 #include <ModuleBase_FilterFactory.h>
41 #include <ModuleBase_Tools.h>
42 #include <ModuleBase_OperationFeature.h>
43 #include <ModuleBase_WidgetFactory.h>
44 #include <ModuleBase_OperationDescription.h>
46 #include <ModelAPI_Object.h>
47 #include <ModelAPI_Events.h>
48 #include <ModelAPI_Validator.h>
49 #include <ModelAPI_Data.h>
50 #include <ModelAPI_Session.h>
51 #include <ModelAPI_ResultBody.h>
52 #include <ModelAPI_AttributeString.h>
53 #include <ModelAPI_AttributeSelectionList.h>
55 #include <GeomDataAPI_Point2D.h>
56 #include <GeomDataAPI_Point.h>
57 #include <GeomDataAPI_Dir.h>
59 #include <XGUI_Displayer.h>
60 #include <XGUI_Workshop.h>
61 #include <XGUI_OperationMgr.h>
62 #include <XGUI_PropertyPanel.h>
63 #include <XGUI_ModuleConnector.h>
64 #include <XGUI_ContextMenuMgr.h>
65 #include <XGUI_Tools.h>
66 #include <XGUI_ObjectsBrowser.h>
67 #include <XGUI_SelectionMgr.h>
68 #include <XGUI_DataModel.h>
69 #include <XGUI_ErrorMgr.h>
70 #include <XGUI_CustomPrs.h>
72 #include <SketchPlugin_Feature.h>
73 #include <SketchPlugin_Sketch.h>
74 #include <SketchPlugin_ConstraintAngle.h>
75 #include <SketchPlugin_ConstraintLength.h>
76 #include <SketchPlugin_ConstraintDistance.h>
77 #include <SketchPlugin_ConstraintParallel.h>
78 #include <SketchPlugin_ConstraintPerpendicular.h>
79 #include <SketchPlugin_ConstraintRadius.h>
81 #include <SketcherPrs_SymbolPrs.h>
82 #include <SketcherPrs_Tools.h>
84 #include <Events_Loop.h>
85 #include <Config_PropManager.h>
86 #include <Config_Keywords.h>
88 #include <StdSelect_TypeOfFace.hxx>
89 #include <TopoDS_Vertex.hxx>
91 #include <TopoDS_Shape.hxx>
92 #include <BRep_Tool.hxx>
93 #include <AIS_Dimension.hxx>
96 #include <QMouseEvent>
99 #include <QApplication>
100 #include <QMessageBox>
101 #include <QMainWindow>
105 #include <GeomAlgoAPI_FaceBuilder.h>
106 #include <GeomDataAPI_Dir.h>
108 #include <SelectMgr_ListIteratorOfListOfFilter.hxx>
114 /*!Create and return new instance of XGUI_Module*/
115 extern "C" PARTSET_EXPORT ModuleBase_IModule* createModule(ModuleBase_IWorkshop* theWshop)
117 return new PartSet_Module(theWshop);
120 PartSet_Module::PartSet_Module(ModuleBase_IWorkshop* theWshop)
121 : ModuleBase_IModule(theWshop),
124 new PartSet_IconFactory();
126 mySketchMgr = new PartSet_SketcherMgr(this);
127 mySketchReentrantMgr = new PartSet_SketcherReetntrantMgr(theWshop);
129 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(theWshop);
130 XGUI_Workshop* aWorkshop = aConnector->workshop();
132 ModuleBase_IViewer* aViewer = theWshop->viewer();
133 connect(aViewer, SIGNAL(keyRelease(ModuleBase_IViewWindow*, QKeyEvent*)),
134 this, SLOT(onKeyRelease(ModuleBase_IViewWindow*, QKeyEvent*)));
135 connect(aViewer, SIGNAL(viewTransformed(int)),
136 SLOT(onViewTransformed(int)));
137 connect(aViewer, SIGNAL(viewCreated(ModuleBase_IViewWindow*)),
138 SLOT(onViewCreated(ModuleBase_IViewWindow*)));
139 myMenuMgr = new PartSet_MenuMgr(this);
140 myCustomPrs = new PartSet_CustomPrs(theWshop);
142 myOverconstraintListener = new PartSet_OverconstraintListener(theWshop);
144 Events_Loop* aLoop = Events_Loop::loop();
145 aLoop->registerListener(this, Events_Loop::eventByName(EVENT_DOCUMENT_CHANGED));
147 mySelectionFilters.Append(new PartSet_GlobalFilter(myWorkshop));
148 mySelectionFilters.Append(new PartSet_FilterInfinite(myWorkshop));
150 myHasConstraintShown[PartSet_Tools::Geometrical] = true;
151 myHasConstraintShown[PartSet_Tools::Dimensional] = true;
152 myHasConstraintShown[PartSet_Tools::Expressions] = false;
154 Config_PropManager::registerProp("Visualization", "operation_parameter_color",
155 "Reference shape wireframe color in operation", Config_Prop::Color,
156 PartSet_CustomPrs::OPERATION_PARAMETER_COLOR());
157 Config_PropManager::registerProp("Visualization", "operation_result_color",
158 "Result shape wireframe color in operation", Config_Prop::Color,
159 PartSet_CustomPrs::OPERATION_RESULT_COLOR());
160 Config_PropManager::registerProp("Visualization", "operation_highlight_color",
161 "Multi selector item color in operation", Config_Prop::Color,
162 PartSet_CustomPrs::OPERATION_HIGHLIGHT_COLOR());
165 PartSet_Module::~PartSet_Module()
167 SelectMgr_ListIteratorOfListOfFilter aIt(mySelectionFilters);
168 for (; aIt.More(); aIt.Next()) {
169 Handle(SelectMgr_Filter) aFilter = aIt.Value();
170 if (!aFilter.IsNull())
174 delete myOverconstraintListener;
177 void PartSet_Module::activateSelectionFilters()
179 SelectMgr_ListIteratorOfListOfFilter aIt(mySelectionFilters);
180 for (; aIt.More(); aIt.Next()) {
181 Handle(SelectMgr_Filter) aFilter = aIt.Value();
182 if (!aFilter.IsNull())
183 myWorkshop->viewer()->addSelectionFilter(aFilter);
187 void PartSet_Module::deactivateSelectionFilters()
189 SelectMgr_ListIteratorOfListOfFilter aIt(mySelectionFilters);
190 for (; aIt.More(); aIt.Next()) {
191 Handle(SelectMgr_Filter) aFilter = aIt.Value();
192 if (!aFilter.IsNull())
193 myWorkshop->viewer()->removeSelectionFilter(aFilter);
197 void PartSet_Module::storeSelection()
199 sketchMgr()->storeSelection();
202 void PartSet_Module::restoreSelection()
204 sketchMgr()->restoreSelection();
207 void PartSet_Module::registerValidators()
209 //Registering of validators
210 SessionPtr aMgr = ModelAPI_Session::get();
211 ModelAPI_ValidatorsFactory* aFactory = aMgr->validators();
212 aFactory->registerValidator("PartSet_DistanceSelection", new PartSet_DistanceSelection);
213 aFactory->registerValidator("PartSet_LengthSelection", new PartSet_LengthSelection);
214 aFactory->registerValidator("PartSet_PerpendicularSelection", new PartSet_PerpendicularSelection);
215 aFactory->registerValidator("PartSet_ParallelSelection", new PartSet_ParallelSelection);
216 aFactory->registerValidator("PartSet_RadiusSelection", new PartSet_RadiusSelection);
217 aFactory->registerValidator("PartSet_RigidSelection", new PartSet_RigidSelection);
218 aFactory->registerValidator("PartSet_CoincidentSelection", new PartSet_CoincidentSelection);
219 aFactory->registerValidator("PartSet_HVDirSelection", new PartSet_HVDirSelection);
220 aFactory->registerValidator("PartSet_TangentSelection", new PartSet_TangentSelection);
221 aFactory->registerValidator("PartSet_FilletSelection", new PartSet_FilletSelection);
222 aFactory->registerValidator("PartSet_AngleSelection", new PartSet_AngleSelection);
223 aFactory->registerValidator("PartSet_EqualSelection", new PartSet_EqualSelection);
224 aFactory->registerValidator("PartSet_CollinearSelection", new PartSet_CollinearSelection);
225 aFactory->registerValidator("PartSet_MiddlePointSelection", new PartSet_MiddlePointSelection);
226 aFactory->registerValidator("PartSet_DifferentObjects", new PartSet_DifferentObjectsValidator);
227 aFactory->registerValidator("PartSet_CoincidentAttr", new PartSet_CoincidentAttr);
230 void PartSet_Module::registerFilters()
232 //Registering of selection filters
233 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
234 ModuleBase_FilterFactory* aFactory = aConnector->selectionFilters();
237 void PartSet_Module::registerProperties()
239 Config_PropManager::registerProp("Sketch planes", "planes_size", "Size", Config_Prop::Double,
241 Config_PropManager::registerProp("Sketch planes", "planes_thickness", "Thickness",
242 Config_Prop::Integer, SKETCH_WIDTH);
243 Config_PropManager::registerProp("Sketch planes", "rotate_to_plane", "Rotate to plane when selected",
244 Config_Prop::Boolean, "false");
247 void PartSet_Module::connectToPropertyPanel(ModuleBase_ModelWidget* theWidget, const bool isToConnect)
249 mySketchMgr->connectToPropertyPanel(theWidget, isToConnect);
252 void PartSet_Module::operationCommitted(ModuleBase_Operation* theOperation)
254 if (PartSet_SketcherMgr::isNestedSketchOperation(theOperation)) {
255 mySketchMgr->commitNestedSketch(theOperation);
258 /// Restart sketcher operations automatically
259 if (!mySketchReentrantMgr->operationCommitted(theOperation)) {
261 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>(theOperation);
262 if (aFOperation && !aFOperation->isEditOperation()) {
263 // the selection is cleared after commit the create operation
264 // in order to do not use the same selected objects in the restarted operation
265 // for common behaviour, the selection is cleared even if the operation is not restarted
266 getWorkshop()->selector()->clearSelection();
271 void PartSet_Module::operationAborted(ModuleBase_Operation* theOperation)
273 /// Restart sketcher operations automatically
274 mySketchReentrantMgr->operationAborted(theOperation);
277 void PartSet_Module::operationStarted(ModuleBase_Operation* theOperation)
279 ModuleBase_IWorkshop* anIWorkshop = workshop();
280 if (!theOperation->getDescription()->hasXmlRepresentation()) { //!< No need for property panel
281 anIWorkshop->updateCommandStatus();
284 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>
287 XGUI_Workshop* aWorkshop = XGUI_Tools::workshop(anIWorkshop);
288 XGUI_PropertyPanel* aPropertyPanel = aWorkshop->propertyPanel();
289 ModuleBase_ModelWidget* aFilledWidget = 0;
290 bool aPostonedWidgetActivation = false;
291 FeaturePtr aFeature = aFOperation->feature();
293 std::string aGreedAttributeId = ModuleBase_Tools::findGreedAttribute(anIWorkshop, aFeature);
294 // if there is a greed attribute, automatic commit by preselection for this feature is prohibited
295 aWorkshop->setPropertyPanel(aFOperation);
297 // filling the operation values by the current selection
298 // if the operation can be committed after the controls filling, the method perform should
299 // be stopped. Otherwise unnecessary presentations can be shown(e.g. operation prs in sketch)
300 bool isOperationCommitted = false;
301 if (!aFOperation->isEditOperation()) {
302 aFilledWidget = aFOperation->activateByPreselection(aGreedAttributeId);
303 if (currentOperation() != aFOperation)
304 isOperationCommitted = true;
306 if (aGreedAttributeId.empty()) {
307 // a signal should be emitted before the next widget activation
308 // because, the activation of the next widget will give a focus to the widget. As a result
309 // the value of the widget is initialized. And commit may happens until the value is entered.
311 if (mySketchReentrantMgr->canBeCommittedByPreselection())
312 isOperationCommitted = mySketchMgr->operationActivatedByPreselection();
313 // activate the next obligatory widget
314 if (!isOperationCommitted)
315 aPropertyPanel->activateNextWidget(aFilledWidget);
318 else { // there is a greed widget
319 const QList<ModuleBase_ModelWidget*>& aWidgets = aPropertyPanel->modelWidgets();
320 std::string aFirstAttributeId = aWidgets.front()->attributeID();
321 // activate next widget after greeded if it is the first widget in the panel
322 // else the first panel widget is already activated by operation start
323 if (aFirstAttributeId == aGreedAttributeId)
324 aPostonedWidgetActivation = true;
327 } if (!isOperationCommitted) {
328 anIWorkshop->updateCommandStatus();
329 aWorkshop->connectToPropertyPanel(true);
330 operationStartedInternal(aFOperation);
332 // the objects of the current operation should be deactivated
333 QObjectPtrList anObjects;
334 anObjects.append(aFeature);
335 std::list<ResultPtr> aResults = aFeature->results();
336 std::list<ResultPtr>::const_iterator aIt;
337 for (aIt = aResults.begin(); aIt != aResults.end(); ++aIt) {
338 anObjects.append(*aIt);
340 QObjectPtrList::const_iterator anIt = anObjects.begin(), aLast = anObjects.end();
341 for (; anIt != aLast; anIt++)
342 aWorkshop->deactivateActiveObject(*anIt, false);
343 if (anObjects.size() > 0) {
344 XGUI_Displayer* aDisplayer = aWorkshop->displayer();
345 aDisplayer->updateViewer();
348 if (aPostonedWidgetActivation) {
349 // if the widget is an empty in the chain of activated widgets, the current operation
350 // is restarted. It should be performed after functionality of the operation starting
351 aPropertyPanel->activateNextWidget(aFilledWidget);
357 void PartSet_Module::operationStartedInternal(ModuleBase_Operation* theOperation)
359 /// Restart sketcher operations automatically
360 mySketchReentrantMgr->operationStarted(theOperation);
362 if (PartSet_SketcherMgr::isSketchOperation(theOperation)) {
363 mySketchMgr->startSketch(theOperation);
365 else if (PartSet_SketcherMgr::isNestedSketchOperation(theOperation)) {
366 mySketchMgr->startNestedSketch(theOperation);
369 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>(theOperation);
371 myCustomPrs->activate(aFOperation->feature(), ModuleBase_IModule::CustomizeArguments, true);
372 myCustomPrs->activate(aFOperation->feature(), ModuleBase_IModule::CustomizeResults, true);
376 void PartSet_Module::operationResumed(ModuleBase_Operation* theOperation)
378 ModuleBase_IModule::operationResumed(theOperation);
380 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>(theOperation);
382 myCustomPrs->activate(aFOperation->feature(), ModuleBase_IModule::CustomizeArguments, true);
383 myCustomPrs->activate(aFOperation->feature(), ModuleBase_IModule::CustomizeResults, true);
387 void PartSet_Module::operationStopped(ModuleBase_Operation* theOperation)
389 bool isModifiedArgs = myCustomPrs->deactivate(ModuleBase_IModule::CustomizeArguments, false);
390 bool isModifiedResults = myCustomPrs->deactivate(ModuleBase_IModule::CustomizeResults, false);
391 bool isModified = isModifiedArgs || isModifiedResults;
393 if (PartSet_SketcherMgr::isNestedSketchOperation(theOperation)) {
394 mySketchMgr->stopNestedSketch(theOperation);
397 //VSV: Viewer is updated on feature update and redisplay
399 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(myWorkshop);
400 XGUI_Displayer* aDisplayer = aConnector->workshop()->displayer();
401 aDisplayer->updateViewer();
404 QMap<PartSet_Tools::ConstraintVisibleState, bool>::const_iterator anIt = myHasConstraintShown.begin(),
405 aLast = myHasConstraintShown.end();
406 for (; anIt != aLast; anIt++) {
407 myHasConstraintShown[anIt.key()];
408 mySketchMgr->updateBySketchParameters(anIt.key(), anIt.value());
412 ModuleBase_Operation* PartSet_Module::currentOperation() const
414 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
415 XGUI_OperationMgr* anOpMgr = aConnector->workshop()->operationMgr();
416 return anOpMgr->currentOperation();
419 bool PartSet_Module::canUndo() const
421 bool aCanUndo = false;
422 SessionPtr aMgr = ModelAPI_Session::get();
423 if (aMgr->hasModuleDocument() && aMgr->canUndo()) {
424 aCanUndo = !aMgr->isOperation();
425 if (!aCanUndo) // check the enable state additionally by sketch manager
426 aCanUndo = aMgr->canUndo();
431 bool PartSet_Module::canRedo() const
433 bool aCanRedo = false;
434 SessionPtr aMgr = ModelAPI_Session::get();
435 if (aMgr->hasModuleDocument() && aMgr->canRedo()) {
436 aCanRedo = !aMgr->isOperation();
437 if (!aCanRedo) // check the enable state additionally by sketch manager
438 aCanRedo = aMgr->canRedo();
443 bool PartSet_Module::canApplyAction(const ObjectPtr& theObject, const QString& theActionId) const
446 if (theActionId == "MOVE_CMD") {
447 FeaturePtr aFeature = ModelAPI_Feature::feature(theObject);
449 // part features can not be moved in the history.
450 if (aFeature->getKind() == PartSetPlugin_Part::ID())
457 bool PartSet_Module::canEraseObject(const ObjectPtr& theObject) const
459 // the sketch manager put the restriction to the objects erase
460 return mySketchMgr->canEraseObject(theObject);
463 bool PartSet_Module::canDisplayObject(const ObjectPtr& theObject) const
465 // the sketch manager put the restriction to the objects display
466 return mySketchMgr->canDisplayObject(theObject);
469 void PartSet_Module::processHiddenObject(const std::list<ObjectPtr>& theObjects)
471 mySketchMgr->processHiddenObject(theObjects);
474 bool PartSet_Module::canActivateSelection(const ObjectPtr& theObject) const
476 bool aCanActivate = ModuleBase_IModule::canActivateSelection(theObject);
478 ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
479 bool isSketchOp = PartSet_SketcherMgr::isSketchOperation(anOperation),
480 isNestedOp = PartSet_SketcherMgr::isNestedSketchOperation(anOperation);
481 if (isSketchOp || isNestedOp) {
482 // in active sketch operation it is possible to activate operation object in selection
483 // in the edit operation, e.g. points of the line can be moved when the line is edited
484 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>(anOperation);
485 aCanActivate = aCanActivate || (aFOperation && aFOperation->isEditOperation());
490 bool PartSet_Module::addViewerMenu(QMenu* theMenu, const QMap<QString, QAction*>& theStdActions) const
492 return myMenuMgr->addViewerMenu(theMenu, theStdActions);
495 void PartSet_Module::updateViewerMenu(const QMap<QString, QAction*>& theStdActions)
497 myMenuMgr->updateViewerMenu(theStdActions);
500 QString PartSet_Module::getFeatureError(const FeaturePtr& theFeature)
502 QString anError = ModuleBase_IModule::getFeatureError(theFeature);
503 if (anError.isEmpty())
504 anError = sketchMgr()->getFeatureError(theFeature);
509 void PartSet_Module::grantedOperationIds(ModuleBase_Operation* theOperation,
510 QStringList& theIds) const
512 myMenuMgr->grantedOperationIds(theOperation, theIds);
514 if (PartSet_SketcherMgr::isSketchOperation(theOperation)) {
515 XGUI_Workshop* aWorkshop = getWorkshop();
516 theIds.append(aWorkshop->contextMenuMgr()->action("DELETE_CMD")->text());
520 void PartSet_Module::activeSelectionModes(QIntList& theModes)
523 if (mySketchMgr->activeSketch().get())
524 PartSet_SketcherMgr::sketchSelectionModes(theModes);
527 bool PartSet_Module::isMouseOverWindow()
529 return mySketchMgr->isMouseOverWindow();
532 void PartSet_Module::closeDocument()
537 void PartSet_Module::clearViewer()
539 myCustomPrs->clearPrs();
541 XGUI_Workshop* aWorkshop = getWorkshop();
542 XGUI_Displayer* aDisplayer = aWorkshop->displayer();
543 aDisplayer->deactivateSelectionFilters();
546 void PartSet_Module::propertyPanelDefined(ModuleBase_Operation* theOperation)
548 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>(theOperation);
552 ModuleBase_IPropertyPanel* aPanel = aFOperation->propertyPanel();
553 // we have to manually activate the sketch label in edit mode
554 if (PartSet_SketcherMgr::isSketchOperation(aFOperation) && (aFOperation->isEditOperation()))
555 aPanel->activateWidget(aPanel->modelWidgets().first());
558 bool PartSet_Module::createWidgets(ModuleBase_Operation* theOperation,
559 QList<ModuleBase_ModelWidget*>& theWidgets) const
561 bool aProcessed = false;
563 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>(theOperation);
564 XGUI_Workshop* aWorkshop = getWorkshop();
565 XGUI_PropertyPanel* aPropertyPanel = aWorkshop->propertyPanel();
566 if (mySketchMgr->activeSketch().get() && aFOperation && aPropertyPanel) {
567 ModuleBase_ISelection* aSelection = workshop()->selection();
568 // click on a point in sketch leads here with the point is highlighted, not yet selected
569 QList<ModuleBase_ViewerPrs> aPreselection = aSelection->getHighlighted();
570 if (aPreselection.size() == 1) {
571 ModuleBase_ViewerPrs aSelectedPrs = aPreselection[0];
572 ObjectPtr anObject = aSelectedPrs.object();
574 FeaturePtr aFeature = ModelAPI_Feature::feature(anObject);
575 FeaturePtr anOpFeature = aFOperation->feature();
576 GeomShapePtr aShape = aSelectedPrs.shape();
577 // click on the digit of dimension constrain comes here with an empty shape, so we need the check
578 if (aFeature == anOpFeature && aShape.get() && !aShape->isNull()) {
579 const TopoDS_Shape& aTDShape = aShape->impl<TopoDS_Shape>();
580 AttributePtr anAttribute = PartSet_Tools::findAttributeBy2dPoint(anObject, aTDShape,
581 mySketchMgr->activeSketch());
582 if (anAttribute.get()) {
583 QString aXmlRepr = aFOperation->getDescription()->xmlRepresentation();
584 ModuleBase_WidgetFactory aFactory(aXmlRepr.toStdString(), workshop());
586 const std::string anAttributeId = anAttribute->id();
587 aFactory.createWidget(aPropertyPanel->contentWidget(), anAttributeId);
589 theWidgets = aFactory.getModelWidgets();
590 // it is possible that the point does not present in XML definition,
591 // in this case, we assume that it is not processed by this module
592 // e.g. "Intersection point" feature
593 aProcessed = !theWidgets.isEmpty();
601 void PartSet_Module::onSelectionChanged()
603 ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
607 bool isSketcherOp = false;
608 // An edit operation is enable only if the current opeation is the sketch operation
609 if (mySketchMgr->activeSketch()) {
610 if (PartSet_Tools::sketchPlane(mySketchMgr->activeSketch()))
611 isSketcherOp = PartSet_SketcherMgr::isSketchOperation(aOperation);
614 // Editing of constraints can be done on selection
615 ModuleBase_ISelection* aSelect = myWorkshop->selection();
616 QList<ModuleBase_ViewerPrs> aSelected = aSelect->getSelected();
617 if (aSelected.size() == 1) {
618 ModuleBase_ViewerPrs aPrs = aSelected.first();
619 ObjectPtr aObject = aPrs.object();
620 FeaturePtr aFeature = ModelAPI_Feature::feature(aObject);
622 std::string aId = aFeature->getKind();
623 if ((aId == SketchPlugin_ConstraintRadius::ID()) ||
624 (aId == SketchPlugin_ConstraintLength::ID()) ||
625 (aId == SketchPlugin_ConstraintDistance::ID()) ||
626 (aId == SketchPlugin_ConstraintAngle::ID())) {
627 editFeature(aFeature);
634 void PartSet_Module::onKeyRelease(ModuleBase_IViewWindow* theWnd, QKeyEvent* theEvent)
636 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
637 XGUI_OperationMgr* anOpMgr = aConnector->workshop()->operationMgr();
638 anOpMgr->onKeyReleased(theWnd->viewPort(), theEvent);
641 ModuleBase_ModelWidget* PartSet_Module::createWidgetByType(const std::string& theType,
643 Config_WidgetAPI* theWidgetApi)
645 ModuleBase_IWorkshop* aWorkshop = workshop();
646 XGUI_Workshop* aXUIWorkshop = getWorkshop();
647 ModuleBase_ModelWidget* aWgt = NULL;
648 if (theType == "sketch-start-label") {
649 PartSet_WidgetSketchLabel* aLabelWgt = new PartSet_WidgetSketchLabel(theParent, aWorkshop,
650 theWidgetApi, myHasConstraintShown);
651 connect(aLabelWgt, SIGNAL(planeSelected(const std::shared_ptr<GeomAPI_Pln>&)),
652 mySketchMgr, SLOT(onPlaneSelected(const std::shared_ptr<GeomAPI_Pln>&)));
653 connect(aLabelWgt, SIGNAL(showConstraintToggled(int, bool)),
654 mySketchMgr, SLOT(onShowConstraintsToggle(int, bool)));
656 } else if (theType == "sketch-2dpoint_selector") {
657 PartSet_WidgetPoint2D* aPointWgt = new PartSet_WidgetPoint2D(theParent, aWorkshop,
659 aPointWgt->setSketch(mySketchMgr->activeSketch());
660 connect(aPointWgt, SIGNAL(vertexSelected()), sketchReentranceMgr(), SLOT(onVertexSelected()));
662 }else if (theType == "sketch-2dpoint_flyout_selector") {
663 PartSet_WidgetPoint2DFlyout* aPointWgt = new PartSet_WidgetPoint2DFlyout(theParent, aWorkshop,
665 aPointWgt->setSketch(mySketchMgr->activeSketch());
666 connect(aPointWgt, SIGNAL(vertexSelected()), sketchReentranceMgr(), SLOT(onVertexSelected()));
668 } else if (theType == "point2ddistance") {
669 PartSet_WidgetPoint2dDistance* aDistanceWgt = new PartSet_WidgetPoint2dDistance(theParent,
670 aWorkshop, theWidgetApi);
671 aDistanceWgt->setSketch(mySketchMgr->activeSketch());
673 } else if (theType == "sketch_shape_selector") {
674 PartSet_WidgetShapeSelector* aShapeSelectorWgt =
675 new PartSet_WidgetShapeSelector(theParent, aWorkshop, theWidgetApi);
676 aShapeSelectorWgt->setSketcher(mySketchMgr->activeSketch());
677 aWgt = aShapeSelectorWgt;
678 } else if (theType == "sketch_multi_selector") {
679 PartSet_WidgetMultiSelector* aShapeSelectorWgt =
680 new PartSet_WidgetMultiSelector(theParent, aWorkshop, theWidgetApi);
681 aShapeSelectorWgt->setSketcher(mySketchMgr->activeSketch());
682 aWgt = aShapeSelectorWgt;
683 } else if (theType == "composite_multi_selector") {
684 PartSet_WidgetMultiSelectorComposite* aShapeSelectorWgt =
685 new PartSet_WidgetMultiSelectorComposite(theParent, aWorkshop, theWidgetApi);
686 aWgt = aShapeSelectorWgt;
688 else if (theType == WDG_DOUBLEVALUE_EDITOR) {
689 aWgt = new PartSet_WidgetEditor(theParent, aWorkshop, theWidgetApi);
690 } else if (theType == "export_file_selector") {
691 aWgt = new PartSet_WidgetFileSelector(theParent, aWorkshop, theWidgetApi);
692 } else if (theType == "sketch_launcher") {
693 aWgt = new PartSet_WidgetSketchCreator(theParent, this, theWidgetApi);
694 } else if (theType == "module_choice") {
695 aWgt = new PartSet_WidgetChoice(theParent, theWidgetApi);
696 connect(aWgt, SIGNAL(itemSelected(ModuleBase_ModelWidget*, int)),
697 this, SLOT(onChoiceChanged(ModuleBase_ModelWidget*, int)));
702 ModuleBase_ModelWidget* PartSet_Module::activeWidget() const
704 ModuleBase_ModelWidget* anActiveWidget = 0;
706 anActiveWidget = mySketchReentrantMgr->internalActiveWidget();
707 if (!anActiveWidget) {
708 ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
710 ModuleBase_IPropertyPanel* aPanel = aOperation->propertyPanel();
711 anActiveWidget = aPanel->activeWidget();
714 return anActiveWidget;
717 bool PartSet_Module::deleteObjects()
719 bool isProcessed = false;
721 XGUI_Workshop* aWorkshop = getWorkshop();
722 XGUI_OperationMgr* anOpMgr = aWorkshop->operationMgr();
724 //SessionPtr aMgr = ModelAPI_Session::get();
725 // 1. check whether the delete should be processed in the module
726 ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
727 bool isSketchOp = PartSet_SketcherMgr::isSketchOperation(anOperation),
728 isNestedOp = PartSet_SketcherMgr::isNestedSketchOperation(anOperation);
729 if (isSketchOp || isNestedOp) {
731 // 2. find selected presentations
732 // selected objects should be collected before the current operation abort because
733 // the abort leads to selection lost on constraint objects. It can be corrected after #386 issue
734 ModuleBase_ISelection* aSel = workshop()->selection();
735 QObjectPtrList aSelectedObj = aSel->selectedPresentations();
736 // if there are no selected objects in the viewer, that means that the selection in another
737 // place cased this method. It is necessary to return the false value to understande in above
738 // method that delete is not processed
739 if (aSelectedObj.count() == 0)
742 // avoid delete of the objects, which are not belong to the current sketch
743 // in order to do not delete results of other sketches
744 QObjectPtrList aSketchObjects;
745 QObjectPtrList::const_iterator anIt = aSelectedObj.begin(), aLast = aSelectedObj.end();
746 for ( ; anIt != aLast; anIt++) {
747 ObjectPtr anObject = *anIt;
748 if (mySketchMgr->isObjectOfSketch(anObject)) {
749 // sketch feature should be used in this list because workshop deletes features only
750 // results are skipped
751 FeaturePtr aSketchFeature = ModelAPI_Feature::feature(anObject);
752 aSketchObjects.append(aSketchFeature);
755 // if the selection contains only local selected presentations from other sketches,
756 // the Delete operation should not be done at all
757 if (aSketchObjects.size() == 0)
760 // 3. start operation
761 QString aDescription = aWorkshop->contextMenuMgr()->action("DELETE_CMD")->text();
762 ModuleBase_OperationAction* anOpAction = new ModuleBase_OperationAction(aDescription, this);
764 // the active nested sketch operation should be aborted unconditionally
765 // the Delete action should be additionally granted for the Sketch operation
766 // in order to do not abort/commit it
767 if (!anOpMgr->canStartOperation(anOpAction->id()))
768 return true; // the objects are processed but can not be deleted
770 anOpMgr->startOperation(anOpAction);
772 // 4. delete features
773 // sketch feature should be skipped, only sub-features can be removed
774 // when sketch operation is active
775 aWorkshop->deleteFeatures(aSketchObjects);
777 anOpMgr->commitOperation();
782 void PartSet_Module::onFeatureTriggered()
784 QAction* aCmd = dynamic_cast<QAction*>(sender());
785 if (aCmd->isCheckable() && aCmd->isChecked()) {
786 // 1. check whether the delete should be processed in the module
787 ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
788 bool isNestedOp = PartSet_SketcherMgr::isNestedCreateOperation(anOperation);
790 // in case if in the viewer nothing is displayed, the create operation should not be
791 // comitted even if all values of the feature are initialized
792 if (!mySketchMgr->canDisplayCurrentCreatedFeature()) {
793 // the action information should be saved before the operation is aborted
794 // because this abort leads to update command status, which unchecks this action
795 anOperation->abort();
796 launchOperation(aCmd->data().toString());
800 ModuleBase_IModule::onFeatureTriggered();
803 void PartSet_Module::editFeature(FeaturePtr theFeature)
805 storeConstraintsState(theFeature->getKind());
806 ModuleBase_IModule::editFeature(theFeature);
809 bool PartSet_Module::canCommitOperation() const
814 void PartSet_Module::launchOperation(const QString& theCmdId)
816 storeConstraintsState(theCmdId.toStdString());
817 ModuleBase_IModule::launchOperation(theCmdId);
820 void PartSet_Module::storeConstraintsState(const std::string& theFeatureKind)
822 if (myWorkshop->currentOperation() &&
823 myWorkshop->currentOperation()->id().toStdString() == SketchPlugin_Sketch::ID()) {
824 const QMap<PartSet_Tools::ConstraintVisibleState, bool>& aShownStates =
825 mySketchMgr->showConstraintStates();
826 myHasConstraintShown = aShownStates;
828 if (PartSet_SketcherMgr::constraintsIdList().contains(theFeatureKind.c_str())) {
829 // Show constraints if a constraint was anOperation
830 mySketchMgr->updateBySketchParameters(PartSet_Tools::Geometrical, true);
831 mySketchMgr->updateBySketchParameters(PartSet_Tools::Dimensional, true);
832 mySketchMgr->updateBySketchParameters(PartSet_Tools::Expressions,
833 myHasConstraintShown[PartSet_Tools::Expressions]);
837 void PartSet_Module::onObjectDisplayed(ObjectPtr theObject, AISObjectPtr theAIS)
839 Handle(AIS_InteractiveObject) anAIS = theAIS->impl<Handle(AIS_InteractiveObject)>();
840 if (!anAIS.IsNull()) {
841 Handle(AIS_InteractiveContext) aCtx = anAIS->GetContext();
842 Handle(AIS_Dimension) aDim = Handle(AIS_Dimension)::DownCast(anAIS);
843 if (!aDim.IsNull()) {
844 aCtx->SetZLayer(aDim, myVisualLayerId);
846 Handle(SketcherPrs_SymbolPrs) aCons = Handle(SketcherPrs_SymbolPrs)::DownCast(anAIS);
848 aCtx->SetZLayer(aCons, myVisualLayerId);
853 void PartSet_Module::onBeforeObjectErase(ObjectPtr theObject, AISObjectPtr theAIS)
856 // it should be recomputed in order to disappear in the viewer if the corresponded object
858 //if (myCustomPrs->isActive())
859 // myCustomPrs->redisplay(theObject, false);
862 void PartSet_Module::onViewTransformed(int theTrsfType)
864 // Set length of arrows constant in pixel size
865 // if the operation is panning or rotate or panglobal then do nothing
866 if ((theTrsfType == 1) || (theTrsfType == 3) || (theTrsfType == 4))
868 ModuleBase_IViewer* aViewer = myWorkshop->viewer();
869 Handle(AIS_InteractiveContext) aContext = aViewer->AISContext();
870 if (aContext.IsNull())
873 //Handle(V3d_View) aView = aViewer->activeView();
875 XGUI_Workshop* aWorkshop = getWorkshop();
876 XGUI_Displayer* aDisplayer = aWorkshop->displayer();
877 Handle(V3d_Viewer) aV3dViewer = aContext->CurrentViewer();
878 Handle(V3d_View) aView;
880 for (aV3dViewer->InitDefinedViews();
881 aV3dViewer->MoreDefinedViews();
882 aV3dViewer->NextDefinedViews()) {
883 Handle(V3d_View) aV = aV3dViewer->DefinedView();
884 double aS = aV->Scale();
892 double aLen = aView->Convert(SketcherPrs_Tools::getDefaultArrowSize());
894 double aPrevLen = SketcherPrs_Tools::getArrowSize();
895 SketcherPrs_Tools::setArrowSize(aLen);
896 const double aPrevScale = aViewer->Scale(aViewer->activeView());
897 const double aCurScale = aViewer->activeView()->Camera()->Scale();
898 aViewer->SetScale(aViewer->activeView(), aCurScale);
899 SketcherPrs_Tools::setTextHeight (aCurScale / aPrevScale * SketcherPrs_Tools::getTextHeight());
900 bool isModified = false;
901 QList<AISObjectPtr> aPrsList = aDisplayer->displayedPresentations();
902 foreach (AISObjectPtr aAIS, aPrsList) {
903 Handle(AIS_InteractiveObject) aAisObj = aAIS->impl<Handle(AIS_InteractiveObject)>();
905 Handle(AIS_Dimension) aDim = Handle(AIS_Dimension)::DownCast(aAisObj);
906 if (!aDim.IsNull()) {
907 aDim->DimensionAspect()->ArrowAspect()->SetLength(aLen);
908 aContext->Redisplay(aDim, false);
913 aDisplayer->updateViewer();
916 void PartSet_Module::activateCustomPrs(const FeaturePtr& theFeature, const ModuleBase_CustomizeFlag& theFlag,
917 const bool theUpdateViewer)
919 myCustomPrs->activate(theFeature, theFlag, theUpdateViewer);
922 void PartSet_Module::deactivateCustomPrs(const ModuleBase_CustomizeFlag& theFlag,
923 const bool theUpdateViewer)
925 myCustomPrs->deactivate(theFlag, theUpdateViewer);
928 bool PartSet_Module::customisePresentation(ResultPtr theResult, AISObjectPtr thePrs,
929 std::shared_ptr<GeomAPI_ICustomPrs> theCustomPrs)
931 bool aCustomized = false;
936 XGUI_Workshop* aWorkshop = getWorkshop();
937 XGUI_Displayer* aDisplayer = aWorkshop->displayer();
938 ObjectPtr anObject = aDisplayer->getObject(thePrs);
939 if (anObject.get()) {
940 bool isConflicting = myOverconstraintListener->isConflictingObject(anObject);
941 // customize sketch symbol presentation
943 Handle(AIS_InteractiveObject) anAISIO = thePrs->impl<Handle(AIS_InteractiveObject)>();
944 if (!anAISIO.IsNull()) {
945 if (!Handle(SketcherPrs_SymbolPrs)::DownCast(anAISIO).IsNull()) {
946 Handle(SketcherPrs_SymbolPrs) aPrs = Handle(SketcherPrs_SymbolPrs)::DownCast(anAISIO);
947 if (!aPrs.IsNull()) {
948 std::vector<int> aColor;
949 myOverconstraintListener->getConflictingColor(aColor);
950 aPrs->SetConflictingConstraint(isConflicting, aColor);
956 // customize sketch dimension constraint presentation
958 std::vector<int> aColor;
960 myOverconstraintListener->getConflictingColor(aColor);
963 XGUI_CustomPrs::getDefaultColor(anObject, true, aColor);
964 if (!aColor.empty()) {
965 thePrs->setColor(aColor[0], aColor[1], aColor[2]);
970 // customize dimentional constrains
971 sketchMgr()->customizePresentation(anObject);
977 bool PartSet_Module::customizeObject(ObjectPtr theObject, const ModuleBase_CustomizeFlag& theFlag,
978 const bool theUpdateViewer)
980 bool isRedisplayed = false;
981 if (myCustomPrs->isActive(theFlag))
982 isRedisplayed = myCustomPrs->redisplay(theObject, theFlag, theUpdateViewer);
984 return isRedisplayed;
987 void PartSet_Module::customizeObjectBrowser(QWidget* theObjectBrowser)
989 XGUI_ObjectsBrowser* aOB = dynamic_cast<XGUI_ObjectsBrowser*>(theObjectBrowser);
991 QLabel* aLabel = aOB->activeDocLabel();
992 aLabel->installEventFilter(myMenuMgr);
993 connect(aLabel, SIGNAL(customContextMenuRequested(const QPoint&)),
994 SLOT(onActiveDocPopup(const QPoint&)));
995 //QPalette aPalet = aLabel->palette();
996 //aPalet.setColor(QPalette::Text, QColor(0, 72, 140));
997 //aLabel->setPalette(aPalet);
998 aOB->treeView()->setExpandsOnDoubleClick(false);
999 connect(aOB->treeView(), SIGNAL(doubleClicked(const QModelIndex&)),
1000 SLOT(onTreeViewDoubleClick(const QModelIndex&)));
1004 void PartSet_Module::onActiveDocPopup(const QPoint& thePnt)
1006 SessionPtr aMgr = ModelAPI_Session::get();
1007 QAction* aActivatePartAction = myMenuMgr->action("ACTIVATE_PARTSET_CMD");
1009 XGUI_Workshop* aWorkshop = getWorkshop();
1010 QLabel* aHeader = aWorkshop->objectBrowser()->activeDocLabel();
1012 aActivatePartAction->setEnabled((aMgr->activeDocument() != aMgr->moduleDocument()));
1015 aMenu.addAction(aActivatePartAction);
1016 aMenu.exec(aHeader->mapToGlobal(thePnt));
1019 Handle(AIS_InteractiveObject) PartSet_Module::createPresentation(const ResultPtr& theResult)
1021 return mySketchMgr->createPresentation(theResult);
1025 ObjectPtr PartSet_Module::findPresentedObject(const AISObjectPtr& theAIS) const
1028 ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
1030 /// If last line finished on vertex the lines creation sequence has to be break
1031 ModuleBase_IPropertyPanel* aPanel = aOperation->propertyPanel();
1033 ModuleBase_ModelWidget* anActiveWidget = aPanel->activeWidget();
1034 // if there is an active widget, find the presented object in it
1035 if (!anActiveWidget)
1036 anActiveWidget = aPanel->preselectionWidget();
1038 ModuleBase_WidgetValidated* aWidgetValidated = dynamic_cast<ModuleBase_WidgetValidated*>
1040 if (aWidgetValidated)
1041 anObject = aWidgetValidated->findPresentedObject(theAIS);
1047 bool PartSet_Module::canBeShaded(Handle(AIS_InteractiveObject) theAIS) const
1049 bool aCanBeShaged = true;
1051 Handle(PartSet_ResultSketchPrs) aPrs = Handle(PartSet_ResultSketchPrs)::DownCast(theAIS);
1053 aCanBeShaged = false;
1055 return aCanBeShaged;
1058 void PartSet_Module::addObjectBrowserMenu(QMenu* theMenu) const
1060 QObjectPtrList aObjects = myWorkshop->selection()->selectedObjects();
1061 int aSelected = aObjects.size();
1062 SessionPtr aMgr = ModelAPI_Session::get();
1063 QAction* aActivatePartAction = myMenuMgr->action("ACTIVATE_PART_CMD");
1065 ModuleBase_Operation* aCurrentOp = myWorkshop->currentOperation();
1066 if (aSelected == 1) {
1067 bool hasResult = false;
1068 bool hasFeature = false;
1069 bool hasParameter = false;
1070 bool hasSubFeature = false;
1071 ModuleBase_Tools::checkObjects(aObjects, hasResult, hasFeature, hasParameter, hasSubFeature);
1073 ObjectPtr aObject = aObjects.first();
1075 ResultPartPtr aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aObject);
1076 FeaturePtr aFeature = std::dynamic_pointer_cast<ModelAPI_Feature>(aObject);
1077 bool isPart = aPart.get() ||
1078 (aFeature.get() && (aFeature->getKind() == PartSetPlugin_Part::ID()));
1080 DocumentPtr aPartDoc;
1082 aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aFeature->firstResult());
1084 if (aPart.get()) // this may be null is Part feature is disabled
1085 aPartDoc = aPart->partDoc();
1087 theMenu->addAction(aActivatePartAction);
1088 aActivatePartAction->setEnabled((aMgr->activeDocument() != aPartDoc));
1090 } else if (aObject->document() == aMgr->activeDocument()) {
1091 if (hasParameter || hasFeature) {
1092 myMenuMgr->action("EDIT_CMD")->setEnabled(true);
1093 theMenu->addAction(myMenuMgr->action("EDIT_CMD"));
1094 if (aCurrentOp && aFeature.get()) {
1095 if (aCurrentOp->id().toStdString() == aFeature->getKind())
1096 myMenuMgr->action("EDIT_CMD")->setEnabled(false);
1101 ResultBodyPtr aResult = std::dynamic_pointer_cast<ModelAPI_ResultBody>(aObject);
1103 theMenu->addAction(myMenuMgr->action("SELECT_PARENT_CMD"));
1106 bool aNotDeactivate = (aCurrentOp == 0);
1107 if (!aNotDeactivate) {
1108 aActivatePartAction->setEnabled(false);
1112 void PartSet_Module::processEvent(const std::shared_ptr<Events_Message>& theMessage)
1114 if (theMessage->eventID() == Events_Loop::loop()->eventByName(EVENT_DOCUMENT_CHANGED)) {
1115 // Do not change activation of parts if an operation active
1116 static QStringList aAllowActivationList;
1117 if (aAllowActivationList.isEmpty())
1118 aAllowActivationList <<
1119 QString(PartSetPlugin_Part::ID().c_str()) <<
1120 QString(PartSetPlugin_Duplicate::ID().c_str()) <<
1121 QString(PartSetPlugin_Remove::ID().c_str());
1122 if (myWorkshop->currentOperation() &&
1123 (!aAllowActivationList.contains(myWorkshop->currentOperation()->id())))
1125 XGUI_Workshop* aWorkshop = getWorkshop();
1126 XGUI_DataTree* aTreeView = aWorkshop->objectBrowser()->treeView();
1127 QLabel* aLabel = aWorkshop->objectBrowser()->activeDocLabel();
1128 QPalette aPalet = aLabel->palette();
1130 SessionPtr aMgr = ModelAPI_Session::get();
1131 DocumentPtr aActiveDoc = aMgr->activeDocument();
1132 if (aActivePartIndex.isValid())
1133 aTreeView->setExpanded(aActivePartIndex, false);
1134 XGUI_DataModel* aDataModel = aWorkshop->objectBrowser()->dataModel();
1135 aActivePartIndex = aDataModel->documentRootIndex(aActiveDoc);
1136 if (aActivePartIndex.isValid())
1137 aTreeView->setExpanded(aActivePartIndex, true);
1139 aLabel->setPalette(aPalet);
1140 aWorkshop->updateCommandStatus();
1142 // Update displayed objects in order to update active color
1143 XGUI_Displayer* aDisplayer = aWorkshop->displayer();
1144 QObjectPtrList aObjects = aDisplayer->displayedObjects();
1146 foreach(ObjectPtr aObj, aObjects) {
1147 //TODO: replace by redisplay event.
1148 aHidden = !aObj->data() || !aObj->data()->isValid() ||
1149 aObj->isDisabled() || (!aObj->isDisplayed());
1151 aDisplayer->redisplay(aObj, false);
1153 aDisplayer->updateViewer();
1157 void PartSet_Module::onTreeViewDoubleClick(const QModelIndex& theIndex)
1159 if (myWorkshop->currentOperation()) // Do not change activation of parts if an operation active
1161 SessionPtr aMgr = ModelAPI_Session::get();
1162 if (!theIndex.isValid()) {
1163 aMgr->setActiveDocument(aMgr->moduleDocument());
1166 if (theIndex.column() != 0) // Use only first column
1169 XGUI_Workshop* aWorkshop = getWorkshop();
1170 XGUI_DataModel* aDataModel = aWorkshop->objectBrowser()->dataModel();
1171 // De not use non editable Indexes
1172 if ((aDataModel->flags(theIndex) & Qt::ItemIsSelectable) == 0)
1174 ObjectPtr aObj = aDataModel->object(theIndex);
1176 ResultPartPtr aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aObj);
1177 if (!aPart.get()) { // Probably this is Feature
1178 FeaturePtr aPartFeature = std::dynamic_pointer_cast<ModelAPI_Feature>(aObj);
1179 if (aPartFeature.get() && (aPartFeature->getKind() == PartSetPlugin_Part::ID())) {
1180 aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aPartFeature->firstResult());
1183 if (aPart.get()) { // if this is a part
1184 if (aPart->partDoc() == aMgr->activeDocument()) {
1185 myMenuMgr->activatePartSet();
1193 void PartSet_Module::onViewCreated(ModuleBase_IViewWindow*)
1195 // z layer is created for all started operations in order to visualize operation AIS presentation
1197 Handle(AIS_InteractiveContext) aContext = myWorkshop->viewer()->AISContext();
1198 if (aContext.IsNull())
1201 Handle(V3d_Viewer) aViewer = aContext->CurrentViewer();
1202 if (myVisualLayerId == 0) {
1203 if (myVisualLayerId == 0)
1204 aViewer->AddZLayer(myVisualLayerId);
1206 TColStd_SequenceOfInteger aZList;
1207 aViewer->GetAllZLayers(aZList);
1208 bool aFound = false;
1209 for (int i = 1; i <= aZList.Length(); i++) {
1210 if (aZList(i) == myVisualLayerId) {
1216 aViewer->AddZLayer(myVisualLayerId);
1218 // if there is an active operation with validated widget,
1219 // the filters of this widget should be activated in the created view
1220 ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
1222 ModuleBase_ModelWidget* anActiveWidget = activeWidget();
1223 if (anActiveWidget) {
1224 ModuleBase_WidgetSelector* aWSelector = dynamic_cast<ModuleBase_WidgetSelector*>(anActiveWidget);
1226 aWSelector->activateSelectionAndFilters(true);
1231 //******************************************************
1232 void PartSet_Module::widgetStateChanged(int thePreviousState)
1234 mySketchMgr->widgetStateChanged(thePreviousState);
1237 bool PartSet_Module::processEnter(const std::string& thePreviousAttributeID)
1239 return mySketchReentrantMgr->processEnter(thePreviousAttributeID);
1242 //******************************************************
1243 void PartSet_Module::beforeOperationStarted(ModuleBase_Operation* theOperation)
1247 //******************************************************
1248 void PartSet_Module::beforeOperationStopped(ModuleBase_Operation* theOperation)
1250 if (PartSet_SketcherMgr::isSketchOperation(theOperation)) {
1251 mySketchMgr->stopSketch(theOperation);
1255 //******************************************************
1256 GeomShapePtr PartSet_Module::findShape(const AttributePtr& theAttribute)
1258 GeomShapePtr aGeomShape;
1260 ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
1261 if (anOperation && PartSet_SketcherMgr::isNestedSketchOperation(anOperation)) {
1262 aGeomShape = PartSet_Tools::findShapeBy2DPoint(theAttribute, myWorkshop);
1267 //******************************************************
1268 AttributePtr PartSet_Module::findAttribute(const ObjectPtr& theObject,
1269 const GeomShapePtr& theGeomShape)
1271 AttributePtr anAttribute;
1272 GeomShapePtr aGeomShape = theGeomShape;
1273 if (!aGeomShape.get()) {
1274 // processing shape of result, e.g. sketch circle center is selected, this is a result
1275 // the geom shape is empty, the shape of result should be used
1276 ResultPtr aResult = std::dynamic_pointer_cast<ModelAPI_Result>(theObject);
1277 if (aResult.get()) {
1278 aGeomShape = aResult->shape();
1282 if (aGeomShape.get()) {
1283 TopoDS_Shape aTDSShape = aGeomShape->impl<TopoDS_Shape>();
1284 return PartSet_Tools::findAttributeBy2dPoint(theObject, aTDSShape,
1285 mySketchMgr->activeSketch());
1290 //******************************************************
1291 void PartSet_Module::onChoiceChanged(ModuleBase_ModelWidget* theWidget,
1294 PartSet_WidgetChoice* aChoiceWidget = dynamic_cast<PartSet_WidgetChoice*>(theWidget);
1298 QString aChoiceTitle = aChoiceWidget->getPropertyPanelTitle(theIndex);
1299 if (!aChoiceTitle.isEmpty()) {
1300 ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
1303 ModuleBase_IPropertyPanel* aPanel = aOperation->propertyPanel();
1304 aPanel->setWindowTitle(aChoiceTitle);
1308 //******************************************************
1309 XGUI_Workshop* PartSet_Module::getWorkshop() const
1311 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
1312 return aConnector->workshop();