1 // Copyright (C) 2014-20xx CEA/DEN, EDF R&D
3 #include "PartSet_Module.h"
4 #include "PartSet_WidgetSketchLabel.h"
5 #include "PartSet_Validators.h"
6 #include "PartSet_Tools.h"
7 #include "PartSet_WidgetPoint2d.h"
8 #include "PartSet_WidgetPoint2dDistance.h"
9 #include "PartSet_WidgetPoint2DFlyout.h"
10 #include "PartSet_WidgetShapeSelector.h"
11 #include "PartSet_WidgetMultiSelector.h"
12 #include "PartSet_WidgetEditor.h"
13 #include "PartSet_WidgetFileSelector.h"
14 #include "PartSet_WidgetSketchCreator.h"
15 #include "PartSet_SketcherMgr.h"
16 #include "PartSet_SketcherReetntrantMgr.h"
17 #include "PartSet_MenuMgr.h"
18 #include "PartSet_CustomPrs.h"
19 #include "PartSet_IconFactory.h"
20 #include "PartSet_WidgetChoice.h"
22 #include "PartSet_Filters.h"
23 #include "PartSet_FilterInfinite.h"
25 #include <PartSetPlugin_Remove.h>
26 #include <PartSetPlugin_Part.h>
27 #include <PartSetPlugin_Duplicate.h>
29 #include <ModuleBase_Operation.h>
30 #include <ModuleBase_OperationAction.h>
31 #include <ModuleBase_IViewer.h>
32 #include <ModuleBase_IViewWindow.h>
33 #include <ModuleBase_IPropertyPanel.h>
34 #include <ModuleBase_WidgetEditor.h>
35 #include <ModuleBase_WidgetValidated.h>
36 #include <ModuleBase_FilterFactory.h>
37 #include <ModuleBase_Tools.h>
38 #include <ModuleBase_OperationFeature.h>
40 #include <ModelAPI_Object.h>
41 #include <ModelAPI_Events.h>
42 #include <ModelAPI_Validator.h>
43 #include <ModelAPI_Data.h>
44 #include <ModelAPI_Session.h>
45 #include <ModelAPI_ResultBody.h>
46 #include <ModelAPI_AttributeString.h>
48 #include <GeomDataAPI_Point2D.h>
49 #include <GeomDataAPI_Point.h>
50 #include <GeomDataAPI_Dir.h>
52 #include <XGUI_Displayer.h>
53 #include <XGUI_Workshop.h>
54 #include <XGUI_OperationMgr.h>
55 #include <XGUI_PropertyPanel.h>
56 #include <XGUI_ModuleConnector.h>
57 #include <XGUI_ContextMenuMgr.h>
58 #include <XGUI_Tools.h>
59 #include <XGUI_ObjectsBrowser.h>
60 #include <XGUI_SelectionMgr.h>
61 #include <XGUI_DataModel.h>
62 #include <XGUI_ErrorMgr.h>
64 #include <SketchPlugin_Feature.h>
65 #include <SketchPlugin_Sketch.h>
66 #include <SketchPlugin_ConstraintAngle.h>
67 #include <SketchPlugin_ConstraintLength.h>
68 #include <SketchPlugin_ConstraintDistance.h>
69 #include <SketchPlugin_ConstraintParallel.h>
70 #include <SketchPlugin_ConstraintPerpendicular.h>
71 #include <SketchPlugin_ConstraintRadius.h>
73 #include <SketcherPrs_SymbolPrs.h>
74 #include <SketcherPrs_Tools.h>
76 #include <Events_Loop.h>
77 #include <Config_PropManager.h>
78 #include <Config_Keywords.h>
80 #include <StdSelect_TypeOfFace.hxx>
81 #include <TopoDS_Vertex.hxx>
83 #include <TopoDS_Shape.hxx>
84 #include <BRep_Tool.hxx>
85 #include <AIS_Dimension.hxx>
88 #include <QMouseEvent>
91 #include <QApplication>
92 #include <QMessageBox>
93 #include <QMainWindow>
96 #include <GeomAlgoAPI_FaceBuilder.h>
97 #include <GeomDataAPI_Dir.h>
99 #include <SelectMgr_ListIteratorOfListOfFilter.hxx>
105 /*!Create and return new instance of XGUI_Module*/
106 extern "C" PARTSET_EXPORT ModuleBase_IModule* createModule(ModuleBase_IWorkshop* theWshop)
108 return new PartSet_Module(theWshop);
111 PartSet_Module::PartSet_Module(ModuleBase_IWorkshop* theWshop)
112 : ModuleBase_IModule(theWshop),
115 new PartSet_IconFactory();
117 mySketchMgr = new PartSet_SketcherMgr(this);
118 mySketchReentrantMgr = new PartSet_SketcherReetntrantMgr(theWshop);
120 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(theWshop);
121 XGUI_Workshop* aWorkshop = aConnector->workshop();
123 XGUI_OperationMgr* anOpMgr = aWorkshop->operationMgr();
124 connect(anOpMgr, SIGNAL(operationActivatedByPreselection()),
125 this, SLOT(onOperationActivatedByPreselection()));
127 ModuleBase_IViewer* aViewer = theWshop->viewer();
128 connect(aViewer, SIGNAL(keyRelease(ModuleBase_IViewWindow*, QKeyEvent*)),
129 this, SLOT(onKeyRelease(ModuleBase_IViewWindow*, QKeyEvent*)));
130 connect(aViewer, SIGNAL(viewTransformed(int)),
131 SLOT(onViewTransformed(int)));
132 connect(aViewer, SIGNAL(viewCreated(ModuleBase_IViewWindow*)),
133 SLOT(onViewCreated(ModuleBase_IViewWindow*)));
134 myMenuMgr = new PartSet_MenuMgr(this);
135 myCustomPrs = new PartSet_CustomPrs(theWshop);
137 Events_Loop* aLoop = Events_Loop::loop();
138 aLoop->registerListener(this, Events_Loop::eventByName(EVENT_DOCUMENT_CHANGED));
140 mySelectionFilters.Append(new PartSet_GlobalFilter(myWorkshop));
141 mySelectionFilters.Append(new PartSet_FilterInfinite(myWorkshop));
143 myHasConstraintShown[PartSet_Tools::Geometrical] = true;
144 myHasConstraintShown[PartSet_Tools::Dimensional] = true;
146 Config_PropManager::registerProp("Visualization", "operation_parameter_color",
147 "Reference shape wireframe color in operation", Config_Prop::Color,
148 PartSet_CustomPrs::OPERATION_PARAMETER_COLOR());
149 Config_PropManager::registerProp("Visualization", "operation_result_color",
150 "Result shape wireframe color in operation", Config_Prop::Color,
151 PartSet_CustomPrs::OPERATION_RESULT_COLOR());
152 Config_PropManager::registerProp("Visualization", "operation_highlight_color",
153 "Multi selector item color in operation", Config_Prop::Color,
154 PartSet_CustomPrs::OPERATION_HIGHLIGHT_COLOR());
157 PartSet_Module::~PartSet_Module()
159 SelectMgr_ListIteratorOfListOfFilter aIt(mySelectionFilters);
160 for (; aIt.More(); aIt.Next()) {
161 Handle(SelectMgr_Filter) aFilter = aIt.Value();
162 if (!aFilter.IsNull())
168 void PartSet_Module::activateSelectionFilters()
170 SelectMgr_ListIteratorOfListOfFilter aIt(mySelectionFilters);
171 for (; aIt.More(); aIt.Next()) {
172 Handle(SelectMgr_Filter) aFilter = aIt.Value();
173 if (!aFilter.IsNull())
174 myWorkshop->viewer()->addSelectionFilter(aFilter);
178 void PartSet_Module::deactivateSelectionFilters()
180 SelectMgr_ListIteratorOfListOfFilter aIt(mySelectionFilters);
181 for (; aIt.More(); aIt.Next()) {
182 Handle(SelectMgr_Filter) aFilter = aIt.Value();
183 if (!aFilter.IsNull())
184 myWorkshop->viewer()->removeSelectionFilter(aFilter);
188 void PartSet_Module::registerValidators()
190 //Registering of validators
191 SessionPtr aMgr = ModelAPI_Session::get();
192 ModelAPI_ValidatorsFactory* aFactory = aMgr->validators();
193 aFactory->registerValidator("PartSet_DistanceSelection", new PartSet_DistanceSelection);
194 aFactory->registerValidator("PartSet_LengthSelection", new PartSet_LengthSelection);
195 aFactory->registerValidator("PartSet_PerpendicularSelection", new PartSet_PerpendicularSelection);
196 aFactory->registerValidator("PartSet_ParallelSelection", new PartSet_ParallelSelection);
197 aFactory->registerValidator("PartSet_RadiusSelection", new PartSet_RadiusSelection);
198 aFactory->registerValidator("PartSet_RigidSelection", new PartSet_RigidSelection);
199 aFactory->registerValidator("PartSet_CoincidentSelection", new PartSet_CoincidentSelection);
200 aFactory->registerValidator("PartSet_HVDirSelection", new PartSet_HVDirSelection);
201 aFactory->registerValidator("PartSet_TangentSelection", new PartSet_TangentSelection);
202 aFactory->registerValidator("PartSet_FilletSelection", new PartSet_FilletSelection);
203 aFactory->registerValidator("PartSet_AngleSelection", new PartSet_AngleSelection);
204 aFactory->registerValidator("PartSet_EqualSelection", new PartSet_EqualSelection);
205 aFactory->registerValidator("PartSet_DifferentObjects", new PartSet_DifferentObjectsValidator);
206 aFactory->registerValidator("PartSet_CoincidentAttr", new PartSet_CoincidentAttr);
207 aFactory->registerValidator("PartSet_SketchEntityValidator", new PartSet_SketchEntityValidator);
210 void PartSet_Module::registerFilters()
212 //Registering of selection filters
213 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
214 ModuleBase_FilterFactory* aFactory = aConnector->selectionFilters();
217 void PartSet_Module::registerProperties()
219 Config_PropManager::registerProp("Sketch planes", "planes_size", "Size", Config_Prop::Double,
221 Config_PropManager::registerProp("Sketch planes", "planes_thickness", "Thickness",
222 Config_Prop::Integer, SKETCH_WIDTH);
223 Config_PropManager::registerProp("Sketch planes", "rotate_to_plane", "Rotate to plane when selected",
224 Config_Prop::Boolean, "false");
227 void PartSet_Module::connectToPropertyPanel(ModuleBase_ModelWidget* theWidget, const bool isToConnect)
229 mySketchMgr->connectToPropertyPanel(theWidget, isToConnect);
232 void PartSet_Module::operationCommitted(ModuleBase_Operation* theOperation)
234 if (PartSet_SketcherMgr::isNestedSketchOperation(theOperation)) {
235 mySketchMgr->commitNestedSketch(theOperation);
238 /// Restart sketcher operations automatically
239 if (!mySketchReentrantMgr->operationCommitted(theOperation)) {
241 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>(theOperation);
242 if (aFOperation && !aFOperation->isEditOperation()) {
243 // the selection is cleared after commit the create operation
244 // in order to do not use the same selected objects in the restarted operation
245 // for common behaviour, the selection is cleared even if the operation is not restarted
246 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
247 XGUI_Workshop* aWorkshop = aConnector->workshop();
248 aWorkshop->selector()->clearSelection();
253 void PartSet_Module::operationAborted(ModuleBase_Operation* theOperation)
255 /// Restart sketcher operations automatically
256 mySketchReentrantMgr->operationAborted(theOperation);
259 void PartSet_Module::operationStarted(ModuleBase_Operation* theOperation)
261 /// Restart sketcher operations automatically
262 mySketchReentrantMgr->operationStarted(theOperation);
264 if (PartSet_SketcherMgr::isSketchOperation(theOperation)) {
265 mySketchMgr->startSketch(theOperation);
267 else if (PartSet_SketcherMgr::isNestedSketchOperation(theOperation)) {
268 mySketchMgr->startNestedSketch(theOperation);
271 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>(theOperation);
273 myCustomPrs->activate(aFOperation->feature(), true);
276 void PartSet_Module::operationResumed(ModuleBase_Operation* theOperation)
278 ModuleBase_IModule::operationResumed(theOperation);
280 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>(theOperation);
282 myCustomPrs->activate(aFOperation->feature(), true);
285 void PartSet_Module::operationStopped(ModuleBase_Operation* theOperation)
287 bool isModified = myCustomPrs->deactivate(false);
289 if (PartSet_SketcherMgr::isNestedSketchOperation(theOperation)) {
290 mySketchMgr->stopNestedSketch(theOperation);
293 //VSV: Viewer is updated on feature update and redisplay
295 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(myWorkshop);
296 XGUI_Displayer* aDisplayer = aConnector->workshop()->displayer();
297 aDisplayer->updateViewer();
300 QMap<PartSet_Tools::ConstraintVisibleState, bool>::const_iterator anIt = myHasConstraintShown.begin(),
301 aLast = myHasConstraintShown.end();
302 for (; anIt != aLast; anIt++) {
303 myHasConstraintShown[anIt.key()];
304 mySketchMgr->onShowConstraintsToggle(anIt.value(), myHasConstraintShown[anIt.key()]);
308 ModuleBase_Operation* PartSet_Module::currentOperation() const
310 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
311 XGUI_OperationMgr* anOpMgr = aConnector->workshop()->operationMgr();
312 return anOpMgr->currentOperation();
315 bool PartSet_Module::canUndo() const
317 bool aCanUndo = false;
318 SessionPtr aMgr = ModelAPI_Session::get();
319 if (aMgr->hasModuleDocument() && aMgr->canUndo()) {
320 aCanUndo = !aMgr->isOperation();
321 if (!aCanUndo) // check the enable state additionally by sketch manager
322 aCanUndo = aMgr->canUndo();
327 bool PartSet_Module::canRedo() const
329 bool aCanRedo = false;
330 SessionPtr aMgr = ModelAPI_Session::get();
331 if (aMgr->hasModuleDocument() && aMgr->canRedo()) {
332 aCanRedo = !aMgr->isOperation();
333 if (!aCanRedo) // check the enable state additionally by sketch manager
334 aCanRedo = aMgr->canRedo();
339 bool PartSet_Module::canApplyAction(const ObjectPtr& theObject, const QString& theActionId) const
342 if (theActionId == "MOVE_CMD") {
343 FeaturePtr aFeature = ModelAPI_Feature::feature(theObject);
345 // part features can not be moved in the history.
346 if (aFeature->getKind() == PartSetPlugin_Part::ID())
353 bool PartSet_Module::canEraseObject(const ObjectPtr& theObject) const
355 // the sketch manager put the restriction to the objects erase
356 return mySketchMgr->canEraseObject(theObject);
359 bool PartSet_Module::canDisplayObject(const ObjectPtr& theObject) const
361 // the sketch manager put the restriction to the objects display
362 return mySketchMgr->canDisplayObject(theObject);
365 bool PartSet_Module::canActivateSelection(const ObjectPtr& theObject) const
367 bool aCanActivate = ModuleBase_IModule::canActivateSelection(theObject);
369 ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
370 bool isSketchOp = PartSet_SketcherMgr::isSketchOperation(anOperation),
371 isNestedOp = PartSet_SketcherMgr::isNestedSketchOperation(anOperation);
372 if (isSketchOp || isNestedOp) {
373 // in active sketch operation it is possible to activate operation object in selection
374 // in the edit operation, e.g. points of the line can be moved when the line is edited
375 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>(anOperation);
376 aCanActivate = aCanActivate || (aFOperation && aFOperation->isEditOperation());
381 bool PartSet_Module::addViewerMenu(QMenu* theMenu, const QMap<QString, QAction*>& theStdActions) const
383 return myMenuMgr->addViewerMenu(theMenu, theStdActions);
386 void PartSet_Module::updateViewerMenu(const QMap<QString, QAction*>& theStdActions)
388 myMenuMgr->updateViewerMenu(theStdActions);
391 QString PartSet_Module::getFeatureError(const FeaturePtr& theFeature)
393 QString anError = ModuleBase_IModule::getFeatureError(theFeature);
394 if (anError.isEmpty())
395 anError = sketchMgr()->getFeatureError(theFeature);
400 void PartSet_Module::grantedOperationIds(ModuleBase_Operation* theOperation,
401 QStringList& theIds) const
403 myMenuMgr->grantedOperationIds(theOperation, theIds);
405 if (PartSet_SketcherMgr::isSketchOperation(theOperation)) {
406 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
407 XGUI_Workshop* aWorkshop = aConnector->workshop();
409 theIds.append(aWorkshop->contextMenuMgr()->action("DELETE_CMD")->text());
413 void PartSet_Module::activeSelectionModes(QIntList& theModes)
416 if (mySketchMgr->activeSketch().get())
417 PartSet_SketcherMgr::sketchSelectionModes(theModes);
420 bool PartSet_Module::isMouseOverWindow()
422 return mySketchMgr->isMouseOverWindow();
425 void PartSet_Module::closeDocument()
430 void PartSet_Module::clearViewer()
432 myCustomPrs->clearPrs();
434 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(myWorkshop);
435 XGUI_Workshop* aWorkshop = aConnector->workshop();
436 XGUI_Displayer* aDisplayer = aWorkshop->displayer();
437 aDisplayer->deactivateSelectionFilters();
440 void PartSet_Module::propertyPanelDefined(ModuleBase_Operation* theOperation)
442 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>(theOperation);
446 ModuleBase_IPropertyPanel* aPanel = aFOperation->propertyPanel();
447 // we have to manually activate the sketch label in edit mode
448 if (PartSet_SketcherMgr::isSketchOperation(aFOperation) && (aFOperation->isEditOperation()))
449 aPanel->activateWidget(aPanel->modelWidgets().first());
453 void PartSet_Module::onSelectionChanged()
455 ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
459 bool isSketcherOp = false;
460 // An edit operation is enable only if the current opeation is the sketch operation
461 if (mySketchMgr->activeSketch()) {
462 if (PartSet_Tools::sketchPlane(mySketchMgr->activeSketch()))
463 isSketcherOp = PartSet_SketcherMgr::isSketchOperation(aOperation);
466 // Editing of constraints can be done on selection
467 ModuleBase_ISelection* aSelect = myWorkshop->selection();
468 QList<ModuleBase_ViewerPrs> aSelected = aSelect->getSelected();
469 if (aSelected.size() == 1) {
470 ModuleBase_ViewerPrs aPrs = aSelected.first();
471 ObjectPtr aObject = aPrs.object();
472 FeaturePtr aFeature = ModelAPI_Feature::feature(aObject);
474 std::string aId = aFeature->getKind();
475 if ((aId == SketchPlugin_ConstraintRadius::ID()) ||
476 (aId == SketchPlugin_ConstraintLength::ID()) ||
477 (aId == SketchPlugin_ConstraintDistance::ID()) ||
478 (aId == SketchPlugin_ConstraintAngle::ID())) {
479 editFeature(aFeature);
486 void PartSet_Module::onKeyRelease(ModuleBase_IViewWindow* theWnd, QKeyEvent* theEvent)
488 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
489 XGUI_OperationMgr* anOpMgr = aConnector->workshop()->operationMgr();
490 anOpMgr->onKeyReleased(theEvent);
493 void PartSet_Module::onOperationActivatedByPreselection()
495 if (!mySketchReentrantMgr->canBeCommittedByPreselection())
497 mySketchMgr->operationActivatedByPreselection();
500 ModuleBase_ModelWidget* PartSet_Module::createWidgetByType(const std::string& theType, QWidget* theParent,
501 Config_WidgetAPI* theWidgetApi, std::string theParentId)
503 ModuleBase_IWorkshop* aWorkshop = workshop();
504 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(aWorkshop);
505 XGUI_Workshop* aXUIWorkshop = aConnector->workshop();
506 ModuleBase_ModelWidget* aWgt = NULL;
507 if (theType == "sketch-start-label") {
508 PartSet_WidgetSketchLabel* aLabelWgt = new PartSet_WidgetSketchLabel(theParent, aWorkshop,
509 theWidgetApi, theParentId, mySketchMgr->showConstraintStates());
510 connect(aLabelWgt, SIGNAL(planeSelected(const std::shared_ptr<GeomAPI_Pln>&)),
511 mySketchMgr, SLOT(onPlaneSelected(const std::shared_ptr<GeomAPI_Pln>&)));
512 connect(aLabelWgt, SIGNAL(showConstraintToggled(bool, int)),
513 mySketchMgr, SLOT(onShowConstraintsToggle(bool, int)));
515 } else if (theType == "sketch-2dpoint_selector") {
516 PartSet_WidgetPoint2D* aPointWgt = new PartSet_WidgetPoint2D(theParent, aWorkshop,
517 theWidgetApi, theParentId);
518 aPointWgt->setSketch(mySketchMgr->activeSketch());
519 connect(aPointWgt, SIGNAL(vertexSelected()), sketchReentranceMgr(), SLOT(onVertexSelected()));
521 }else if (theType == "sketch-2dpoint_flyout_selector") {
522 PartSet_WidgetPoint2DFlyout* aPointWgt = new PartSet_WidgetPoint2DFlyout(theParent, aWorkshop,
523 theWidgetApi, theParentId);
524 aPointWgt->setSketch(mySketchMgr->activeSketch());
525 connect(aPointWgt, SIGNAL(vertexSelected()), sketchReentranceMgr(), SLOT(onVertexSelected()));
527 } else if (theType == "point2ddistance") {
528 PartSet_WidgetPoint2dDistance* aDistanceWgt = new PartSet_WidgetPoint2dDistance(theParent,
529 aWorkshop, theWidgetApi, theParentId);
530 aDistanceWgt->setSketch(mySketchMgr->activeSketch());
532 } else if (theType == "sketch_shape_selector") {
533 PartSet_WidgetShapeSelector* aShapeSelectorWgt =
534 new PartSet_WidgetShapeSelector(theParent, aWorkshop, theWidgetApi, theParentId);
535 aShapeSelectorWgt->setSketcher(mySketchMgr->activeSketch());
536 aWgt = aShapeSelectorWgt;
537 } else if (theType == "sketch_multi_selector") {
538 PartSet_WidgetMultiSelector* aShapeSelectorWgt =
539 new PartSet_WidgetMultiSelector(theParent, aWorkshop, theWidgetApi, theParentId);
540 aShapeSelectorWgt->setSketcher(mySketchMgr->activeSketch());
541 aWgt = aShapeSelectorWgt;
542 } else if (theType == WDG_DOUBLEVALUE_EDITOR) {
543 aWgt = new PartSet_WidgetEditor(theParent, aWorkshop, theWidgetApi, theParentId);
544 } else if (theType == "export_file_selector") {
545 aWgt = new PartSet_WidgetFileSelector(theParent, aWorkshop, theWidgetApi, theParentId);
546 } else if (theType == "sketch_launcher") {
547 aWgt = new PartSet_WidgetSketchCreator(theParent, this, theWidgetApi, theParentId);
548 } else if (theType == "module_choice") {
549 aWgt = new PartSet_WidgetChoice(theParent, theWidgetApi, theParentId);
550 connect(aWgt, SIGNAL(itemSelected(int)), SLOT(onBooleanOperationChange(int)));
555 ModuleBase_ModelWidget* PartSet_Module::activeWidget() const
557 ModuleBase_ModelWidget* anActiveWidget = 0;
559 anActiveWidget = mySketchReentrantMgr->internalActiveWidget();
560 if (!anActiveWidget) {
561 ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
563 ModuleBase_IPropertyPanel* aPanel = aOperation->propertyPanel();
564 anActiveWidget = aPanel->activeWidget();
567 return anActiveWidget;
570 bool PartSet_Module::deleteObjects()
572 bool isProcessed = false;
574 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
575 XGUI_Workshop* aWorkshop = aConnector->workshop();
576 XGUI_OperationMgr* anOpMgr = aWorkshop->operationMgr();
578 //SessionPtr aMgr = ModelAPI_Session::get();
579 // 1. check whether the delete should be processed in the module
580 ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
581 bool isSketchOp = PartSet_SketcherMgr::isSketchOperation(anOperation),
582 isNestedOp = PartSet_SketcherMgr::isNestedSketchOperation(anOperation);
583 if (isSketchOp || isNestedOp) {
585 // 2. find selected presentations
586 // selected objects should be collected before the current operation abort because
587 // the abort leads to selection lost on constraint objects. It can be corrected after #386 issue
588 ModuleBase_ISelection* aSel = workshop()->selection();
589 QObjectPtrList aSelectedObj = aSel->selectedPresentations();
590 // if there are no selected objects in the viewer, that means that the selection in another
591 // place cased this method. It is necessary to return the false value to understande in above
592 // method that delete is not processed
593 if (aSelectedObj.count() == 0)
596 // avoid delete of the objects, which are not belong to the current sketch
597 // in order to do not delete results of other sketches
598 QObjectPtrList aSketchObjects;
599 QObjectPtrList::const_iterator anIt = aSelectedObj.begin(), aLast = aSelectedObj.end();
600 for ( ; anIt != aLast; anIt++) {
601 ObjectPtr anObject = *anIt;
602 if (mySketchMgr->isObjectOfSketch(anObject)) {
603 // sketch feature should be used in this list because workshop deletes features only
604 // results are skipped
605 FeaturePtr aSketchFeature = ModelAPI_Feature::feature(anObject);
606 aSketchObjects.append(aSketchFeature);
609 // if the selection contains only local selected presentations from other sketches,
610 // the Delete operation should not be done at all
611 if (aSketchObjects.size() == 0)
614 // 3. start operation
615 QString aDescription = aWorkshop->contextMenuMgr()->action("DELETE_CMD")->text();
616 ModuleBase_OperationAction* anOpAction = new ModuleBase_OperationAction(aDescription, this);
618 // the active nested sketch operation should be aborted unconditionally
619 // the Delete action should be additionally granted for the Sketch operation
620 // in order to do not abort/commit it
621 if (!anOpMgr->canStartOperation(anOpAction->id()))
622 return true; // the objects are processed but can not be deleted
624 anOpMgr->startOperation(anOpAction);
626 // 4. delete features
627 // sketch feature should be skipped, only sub-features can be removed
628 // when sketch operation is active
629 aWorkshop->deleteFeatures(aSketchObjects);
631 anOpMgr->commitOperation();
636 void PartSet_Module::onFeatureTriggered()
638 QAction* aCmd = dynamic_cast<QAction*>(sender());
639 if (aCmd->isCheckable() && aCmd->isChecked()) {
640 // 1. check whether the delete should be processed in the module
641 ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
642 bool isNestedOp = PartSet_SketcherMgr::isNestedCreateOperation(anOperation);
644 // in case if in the viewer nothing is displayed, the create operation should not be
645 // comitted even if all values of the feature are initialized
646 if (!mySketchMgr->canDisplayCurrentCreatedFeature()) {
647 // the action information should be saved before the operation is aborted
648 // because this abort leads to update command status, which unchecks this action
649 anOperation->abort();
650 launchOperation(aCmd->data().toString());
654 ModuleBase_IModule::onFeatureTriggered();
657 void PartSet_Module::launchOperation(const QString& theCmdId)
659 if (myWorkshop->currentOperation() &&
660 myWorkshop->currentOperation()->id().toStdString() == SketchPlugin_Sketch::ID()) {
661 const QMap<PartSet_Tools::ConstraintVisibleState, bool>& aShownStates = mySketchMgr->showConstraintStates();
662 myHasConstraintShown = aShownStates;
664 if (PartSet_SketcherMgr::constraintsIdList().contains(theCmdId)) {
665 // Show constraints if a constraint was anOperation
666 mySketchMgr->onShowConstraintsToggle(true, PartSet_Tools::Geometrical);
667 mySketchMgr->onShowConstraintsToggle(true, PartSet_Tools::Dimensional);
669 ModuleBase_IModule::launchOperation(theCmdId);
673 void PartSet_Module::onObjectDisplayed(ObjectPtr theObject, AISObjectPtr theAIS)
675 Handle(AIS_InteractiveObject) anAIS = theAIS->impl<Handle(AIS_InteractiveObject)>();
676 if (!anAIS.IsNull()) {
677 Handle(AIS_InteractiveContext) aCtx = anAIS->GetContext();
678 Handle(AIS_Dimension) aDim = Handle(AIS_Dimension)::DownCast(anAIS);
679 if (!aDim.IsNull()) {
680 aCtx->SetZLayer(aDim, myVisualLayerId);
682 Handle(SketcherPrs_SymbolPrs) aCons = Handle(SketcherPrs_SymbolPrs)::DownCast(anAIS);
684 aCtx->SetZLayer(aCons, myVisualLayerId);
689 void PartSet_Module::onBeforeObjectErase(ObjectPtr theObject, AISObjectPtr theAIS)
692 // it should be recomputed in order to disappear in the viewer if the corresponded object
694 //if (myCustomPrs->isActive())
695 // myCustomPrs->redisplay(theObject, false);
698 void PartSet_Module::onViewTransformed(int theTrsfType)
700 // Set length of arrows constant in pixel size
701 // if the operation is panning or rotate or panglobal then do nothing
702 if ((theTrsfType == 1) || (theTrsfType == 3) || (theTrsfType == 4))
704 ModuleBase_IViewer* aViewer = myWorkshop->viewer();
705 Handle(AIS_InteractiveContext) aContext = aViewer->AISContext();
706 if (aContext.IsNull())
709 //Handle(V3d_View) aView = aViewer->activeView();
711 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(myWorkshop);
712 XGUI_Workshop* aWorkshop = aConnector->workshop();
713 XGUI_Displayer* aDisplayer = aWorkshop->displayer();
714 Handle(V3d_Viewer) aV3dViewer = aContext->CurrentViewer();
715 Handle(V3d_View) aView;
717 for (aV3dViewer->InitDefinedViews();
718 aV3dViewer->MoreDefinedViews();
719 aV3dViewer->NextDefinedViews()) {
720 Handle(V3d_View) aV = aV3dViewer->DefinedView();
721 double aS = aV->Scale();
729 double aLen = aView->Convert(20);
731 double aPrevLen = SketcherPrs_Tools::getArrowSize();
732 SketcherPrs_Tools::setArrowSize(aLen);
733 const double aPrevScale = aViewer->Scale(aViewer->activeView());
734 const double aCurScale = aViewer->activeView()->Camera()->Scale();
735 aViewer->SetScale(aViewer->activeView(), aCurScale);
736 SketcherPrs_Tools::setTextHeight (aCurScale / aPrevScale * SketcherPrs_Tools::getTextHeight());
737 bool isModified = false;
738 QList<AISObjectPtr> aPrsList = aDisplayer->displayedPresentations();
739 foreach (AISObjectPtr aAIS, aPrsList) {
740 Handle(AIS_InteractiveObject) aAisObj = aAIS->impl<Handle(AIS_InteractiveObject)>();
742 Handle(AIS_Dimension) aDim = Handle(AIS_Dimension)::DownCast(aAisObj);
743 if (!aDim.IsNull()) {
744 aDim->DimensionAspect()->ArrowAspect()->SetLength(aLen);
745 aContext->Redisplay(aDim, false);
750 aDisplayer->updateViewer();
753 bool PartSet_Module::customizeObject(ObjectPtr theObject, const ModuleBase_CustomizeFlag& theFlag,
754 const bool theUpdateViewer)
756 bool isRedisplayed = false;
757 if (myCustomPrs->isActive())
758 isRedisplayed = myCustomPrs->redisplay(theObject, theFlag, theUpdateViewer);
760 return isRedisplayed;
763 void PartSet_Module::customizeObjectBrowser(QWidget* theObjectBrowser)
765 XGUI_ObjectsBrowser* aOB = dynamic_cast<XGUI_ObjectsBrowser*>(theObjectBrowser);
767 QLabel* aLabel = aOB->activeDocLabel();
768 aLabel->installEventFilter(myMenuMgr);
769 connect(aLabel, SIGNAL(customContextMenuRequested(const QPoint&)),
770 SLOT(onActiveDocPopup(const QPoint&)));
771 //QPalette aPalet = aLabel->palette();
772 //aPalet.setColor(QPalette::Text, QColor(0, 72, 140));
773 //aLabel->setPalette(aPalet);
774 aOB->treeView()->setExpandsOnDoubleClick(false);
775 connect(aOB->treeView(), SIGNAL(doubleClicked(const QModelIndex&)),
776 SLOT(onTreeViewDoubleClick(const QModelIndex&)));
780 void PartSet_Module::onActiveDocPopup(const QPoint& thePnt)
782 SessionPtr aMgr = ModelAPI_Session::get();
783 QAction* aActivatePartAction = myMenuMgr->action("ACTIVATE_PARTSET_CMD");
785 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(myWorkshop);
786 XGUI_Workshop* aWorkshop = aConnector->workshop();
787 QLabel* aHeader = aWorkshop->objectBrowser()->activeDocLabel();
789 aActivatePartAction->setEnabled((aMgr->activeDocument() != aMgr->moduleDocument()));
792 aMenu.addAction(aActivatePartAction);
793 aMenu.exec(aHeader->mapToGlobal(thePnt));
797 ObjectPtr PartSet_Module::findPresentedObject(const AISObjectPtr& theAIS) const
800 ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
802 /// If last line finished on vertex the lines creation sequence has to be break
803 ModuleBase_IPropertyPanel* aPanel = aOperation->propertyPanel();
804 ModuleBase_ModelWidget* anActiveWidget = aPanel->activeWidget();
805 // if there is an active widget, find the presented object in it
807 anActiveWidget = aPanel->preselectionWidget();
809 ModuleBase_WidgetValidated* aWidgetValidated = dynamic_cast<ModuleBase_WidgetValidated*>
811 if (aWidgetValidated)
812 anObject = aWidgetValidated->findPresentedObject(theAIS);
817 void PartSet_Module::addObjectBrowserMenu(QMenu* theMenu) const
819 QObjectPtrList aObjects = myWorkshop->selection()->selectedObjects();
820 int aSelected = aObjects.size();
821 SessionPtr aMgr = ModelAPI_Session::get();
822 QAction* aActivatePartAction = myMenuMgr->action("ACTIVATE_PART_CMD");
824 ModuleBase_Operation* aCurrentOp = myWorkshop->currentOperation();
825 if (aSelected == 1) {
826 bool hasResult = false;
827 bool hasFeature = false;
828 bool hasParameter = false;
829 bool hasSubFeature = false;
830 ModuleBase_Tools::checkObjects(aObjects, hasResult, hasFeature, hasParameter, hasSubFeature);
832 ObjectPtr aObject = aObjects.first();
834 ResultPartPtr aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aObject);
835 FeaturePtr aFeature = std::dynamic_pointer_cast<ModelAPI_Feature>(aObject);
836 bool isPart = aPart.get() ||
837 (aFeature.get() && (aFeature->getKind() == PartSetPlugin_Part::ID()));
839 DocumentPtr aPartDoc;
841 aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aFeature->firstResult());
843 if (aPart.get()) // this may be null is Part feature is disabled
844 aPartDoc = aPart->partDoc();
846 theMenu->addAction(aActivatePartAction);
847 aActivatePartAction->setEnabled((aMgr->activeDocument() != aPartDoc));
849 } else if (aObject->document() == aMgr->activeDocument()) {
850 if (hasParameter || hasFeature) {
851 myMenuMgr->action("EDIT_CMD")->setEnabled(true);
852 theMenu->addAction(myMenuMgr->action("EDIT_CMD"));
853 if (aCurrentOp && aFeature.get()) {
854 if (aCurrentOp->id().toStdString() == aFeature->getKind())
855 myMenuMgr->action("EDIT_CMD")->setEnabled(false);
860 ResultBodyPtr aResult = std::dynamic_pointer_cast<ModelAPI_ResultBody>(aObject);
862 theMenu->addAction(myMenuMgr->action("SELECT_PARENT_CMD"));
865 bool aNotDeactivate = (aCurrentOp == 0);
866 if (!aNotDeactivate) {
867 aActivatePartAction->setEnabled(false);
871 void PartSet_Module::processEvent(const std::shared_ptr<Events_Message>& theMessage)
873 if (theMessage->eventID() == Events_Loop::loop()->eventByName(EVENT_DOCUMENT_CHANGED)) {
874 // Do not change activation of parts if an operation active
875 static QStringList aAllowActivationList;
876 if (aAllowActivationList.isEmpty())
877 aAllowActivationList <<
878 QString(PartSetPlugin_Part::ID().c_str()) <<
879 QString(PartSetPlugin_Duplicate::ID().c_str()) <<
880 QString(PartSetPlugin_Remove::ID().c_str());
881 if (myWorkshop->currentOperation() &&
882 (!aAllowActivationList.contains(myWorkshop->currentOperation()->id())))
884 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(myWorkshop);
885 XGUI_Workshop* aWorkshop = aConnector->workshop();
886 XGUI_DataTree* aTreeView = aWorkshop->objectBrowser()->treeView();
887 QLabel* aLabel = aWorkshop->objectBrowser()->activeDocLabel();
888 QPalette aPalet = aLabel->palette();
890 SessionPtr aMgr = ModelAPI_Session::get();
891 DocumentPtr aActiveDoc = aMgr->activeDocument();
892 if (aActivePartIndex.isValid())
893 aTreeView->setExpanded(aActivePartIndex, false);
894 XGUI_DataModel* aDataModel = aWorkshop->objectBrowser()->dataModel();
895 aActivePartIndex = aDataModel->documentRootIndex(aActiveDoc);
896 if (aActivePartIndex.isValid())
897 aTreeView->setExpanded(aActivePartIndex, true);
899 aLabel->setPalette(aPalet);
900 aWorkshop->updateCommandStatus();
902 // Update displayed objects in order to update active color
903 XGUI_Displayer* aDisplayer = aWorkshop->displayer();
904 QObjectPtrList aObjects = aDisplayer->displayedObjects();
906 foreach(ObjectPtr aObj, aObjects) {
907 //TODO: replace by redisplay event.
908 aHidden = !aObj->data() || !aObj->data()->isValid() ||
909 aObj->isDisabled() || (!aObj->isDisplayed());
911 aDisplayer->redisplay(aObj, false);
913 aDisplayer->updateViewer();
917 void PartSet_Module::onTreeViewDoubleClick(const QModelIndex& theIndex)
919 if (myWorkshop->currentOperation()) // Do not change activation of parts if an operation active
921 SessionPtr aMgr = ModelAPI_Session::get();
922 if (!theIndex.isValid()) {
923 aMgr->setActiveDocument(aMgr->moduleDocument());
926 if (theIndex.column() != 0) // Use only first column
929 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(myWorkshop);
930 XGUI_Workshop* aWorkshop = aConnector->workshop();
931 XGUI_DataModel* aDataModel = aWorkshop->objectBrowser()->dataModel();
932 // De not use non editable Indexes
933 if ((aDataModel->flags(theIndex) & Qt::ItemIsSelectable) == 0)
935 ObjectPtr aObj = aDataModel->object(theIndex);
937 ResultPartPtr aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aObj);
938 if (!aPart.get()) { // Probably this is Feature
939 FeaturePtr aPartFeature = std::dynamic_pointer_cast<ModelAPI_Feature>(aObj);
940 if (aPartFeature.get() && (aPartFeature->getKind() == PartSetPlugin_Part::ID())) {
941 aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aPartFeature->firstResult());
944 if (aPart.get()) { // if this is a part
945 if (aPart->partDoc() == aMgr->activeDocument()) {
946 myMenuMgr->activatePartSet();
954 void PartSet_Module::onViewCreated(ModuleBase_IViewWindow*)
956 // z layer is created for all started operations in order to visualize operation AIS presentation
958 Handle(AIS_InteractiveContext) aContext = myWorkshop->viewer()->AISContext();
959 if (aContext.IsNull())
962 Handle(V3d_Viewer) aViewer = aContext->CurrentViewer();
963 if (myVisualLayerId == 0) {
964 if (myVisualLayerId == 0)
965 aViewer->AddZLayer(myVisualLayerId);
967 TColStd_SequenceOfInteger aZList;
968 aViewer->GetAllZLayers(aZList);
970 for (int i = 1; i <= aZList.Length(); i++) {
971 if (aZList(i) == myVisualLayerId) {
977 aViewer->AddZLayer(myVisualLayerId);
979 // if there is an active operation with validated widget,
980 // the filters of this widget should be activated in the created view
981 ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
983 ModuleBase_ModelWidget* anActiveWidget = activeWidget();
984 if (anActiveWidget) {
985 ModuleBase_WidgetSelector* aWSelector = dynamic_cast<ModuleBase_WidgetSelector*>(anActiveWidget);
987 aWSelector->activateSelectionAndFilters(true);
992 //******************************************************
993 void PartSet_Module::widgetStateChanged(int thePreviousState)
995 mySketchMgr->widgetStateChanged(thePreviousState);
998 bool PartSet_Module::processEnter(const std::string& thePreviousAttributeID)
1000 return mySketchReentrantMgr->processEnter(thePreviousAttributeID);
1003 //******************************************************
1004 void PartSet_Module::beforeOperationStarted(ModuleBase_Operation* theOperation)
1008 //******************************************************
1009 void PartSet_Module::beforeOperationStopped(ModuleBase_Operation* theOperation)
1011 if (PartSet_SketcherMgr::isSketchOperation(theOperation)) {
1012 mySketchMgr->stopSketch(theOperation);
1016 //******************************************************
1017 void PartSet_Module::onBooleanOperationChange(int theOperation)
1019 ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
1022 ModuleBase_IPropertyPanel* aPanel = aOperation->propertyPanel();
1023 switch (theOperation) {
1025 aPanel->setWindowTitle(tr("Cut"));
1028 aPanel->setWindowTitle(tr("Fuse"));
1031 aPanel->setWindowTitle(tr("Common"));