1 // Copyright (C) 2014-20xx CEA/DEN, EDF R&D
3 #include "PartSet_Module.h"
4 #include "PartSet_WidgetSketchLabel.h"
5 #include "PartSet_Validators.h"
6 #include "PartSet_Tools.h"
7 #include "ModuleBase_WidgetValidated.h"
8 #include "PartSet_WidgetPoint2d.h"
9 #include "PartSet_WidgetPoint2dDistance.h"
10 #include "PartSet_WidgetShapeSelector.h"
11 #include "PartSet_WidgetPoint2dAngle.h"
12 #include "PartSet_WidgetMultiSelector.h"
13 #include "PartSet_WidgetEditor.h"
14 #include "PartSet_WidgetFileSelector.h"
15 #include "PartSet_WidgetSketchCreator.h"
16 #include "PartSet_SketcherMgr.h"
17 #include "PartSet_MenuMgr.h"
18 #include <PartSet_CustomPrs.h>
20 #include "PartSet_Filters.h"
21 #include "PartSet_FilterInfinite.h"
23 #include <PartSetPlugin_Remove.h>
24 #include <PartSetPlugin_Part.h>
26 #include <ModuleBase_Operation.h>
27 #include <ModuleBase_IViewer.h>
28 #include <ModuleBase_IViewWindow.h>
29 #include <ModuleBase_IPropertyPanel.h>
30 #include <ModuleBase_WidgetEditor.h>
31 #include <ModuleBase_FilterFactory.h>
32 #include <ModuleBase_Tools.h>
33 #include <GeomValidators_ShapeType.h>
35 #include <GeomValidators_Face.h>
36 #include <GeomValidators_ConstructionComposite.h>
37 #include <GeomValidators_ZeroOffset.h>
38 #include <GeomValidators_BooleanArguments.h>
41 #include <ModelAPI_Object.h>
42 #include <ModelAPI_Events.h>
43 #include <ModelAPI_Validator.h>
44 #include <ModelAPI_Data.h>
45 #include <ModelAPI_Session.h>
46 #include <ModelAPI_ShapeValidator.h>
48 #include <GeomDataAPI_Point2D.h>
49 #include <GeomDataAPI_Point.h>
50 #include <GeomDataAPI_Dir.h>
52 #include <XGUI_Displayer.h>
53 #include <XGUI_Workshop.h>
54 #include <XGUI_OperationMgr.h>
55 #include <XGUI_PropertyPanel.h>
56 #include <XGUI_ModuleConnector.h>
57 #include <XGUI_ContextMenuMgr.h>
58 #include <XGUI_Tools.h>
59 #include <XGUI_ObjectsBrowser.h>
60 #include <XGUI_SelectionMgr.h>
62 #include <SketchPlugin_Feature.h>
63 #include <SketchPlugin_Sketch.h>
64 #include <SketchPlugin_Line.h>
65 #include <SketchPlugin_Arc.h>
66 #include <SketchPlugin_Circle.h>
67 #include <SketchPlugin_Point.h>
68 #include <SketchPlugin_ConstraintLength.h>
69 #include <SketchPlugin_ConstraintDistance.h>
70 #include <SketchPlugin_ConstraintParallel.h>
71 #include <SketchPlugin_ConstraintPerpendicular.h>
72 #include <SketchPlugin_ConstraintRadius.h>
74 #include <SketcherPrs_SymbolPrs.h>
75 #include <SketcherPrs_Tools.h>
77 #include <Events_Loop.h>
78 #include <Config_PropManager.h>
79 #include <Config_Keywords.h>
81 #include <StdSelect_TypeOfFace.hxx>
82 #include <TopoDS_Vertex.hxx>
84 #include <TopoDS_Shape.hxx>
85 #include <BRep_Tool.hxx>
86 #include <AIS_Dimension.hxx>
89 #include <QMouseEvent>
92 #include <QApplication>
93 #include <QMessageBox>
94 #include <QMainWindow>
97 #include <GeomAlgoAPI_FaceBuilder.h>
98 #include <GeomDataAPI_Dir.h>
100 #include <SelectMgr_ListIteratorOfListOfFilter.hxx>
108 /*!Create and return new instance of XGUI_Module*/
109 extern "C" PARTSET_EXPORT ModuleBase_IModule* createModule(ModuleBase_IWorkshop* theWshop)
111 return new PartSet_Module(theWshop);
114 PartSet_Module::PartSet_Module(ModuleBase_IWorkshop* theWshop)
115 : ModuleBase_IModule(theWshop),
116 myRestartingMode(RM_None), myVisualLayerId(0)
118 mySketchMgr = new PartSet_SketcherMgr(this);
119 myDataModel = new PartSet_DocumentDataModel(this);
121 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(theWshop);
122 XGUI_Workshop* aWorkshop = aConnector->workshop();
124 XGUI_OperationMgr* anOpMgr = aWorkshop->operationMgr();
125 connect(anOpMgr, SIGNAL(keyEnterReleased()), this, SLOT(onEnterReleased()));
126 connect(anOpMgr, SIGNAL(operationActivatedByPreselection()),
127 this, SLOT(onOperationActivatedByPreselection()));
129 ModuleBase_IViewer* aViewer = theWshop->viewer();
130 connect(aViewer, SIGNAL(keyRelease(ModuleBase_IViewWindow*, QKeyEvent*)),
131 this, SLOT(onKeyRelease(ModuleBase_IViewWindow*, QKeyEvent*)));
132 connect(aViewer, SIGNAL(viewTransformed(int)),
133 SLOT(onViewTransformed(int)));
135 myMenuMgr = new PartSet_MenuMgr(this);
136 myCustomPrs = new PartSet_CustomPrs(theWshop);
138 Events_Loop* aLoop = Events_Loop::loop();
139 aLoop->registerListener(this, Events_Loop::eventByName(EVENT_DOCUMENT_CHANGED));
141 mySelectionFilters.Append(new PartSet_GlobalFilter(myWorkshop));
142 mySelectionFilters.Append(new PartSet_FilterInfinite(myWorkshop));
145 PartSet_Module::~PartSet_Module()
147 SelectMgr_ListIteratorOfListOfFilter aIt(mySelectionFilters);
148 for (; aIt.More(); aIt.Next()) {
149 Handle(SelectMgr_Filter) aFilter = aIt.Value();
150 if (!aFilter.IsNull())
155 void PartSet_Module::activateSelectionFilters()
157 SelectMgr_ListIteratorOfListOfFilter aIt(mySelectionFilters);
158 for (; aIt.More(); aIt.Next()) {
159 Handle(SelectMgr_Filter) aFilter = aIt.Value();
160 if (!aFilter.IsNull())
161 myWorkshop->viewer()->addSelectionFilter(aFilter);
165 void PartSet_Module::deactivateSelectionFilters()
167 SelectMgr_ListIteratorOfListOfFilter aIt(mySelectionFilters);
168 for (; aIt.More(); aIt.Next()) {
169 Handle(SelectMgr_Filter) aFilter = aIt.Value();
170 if (!aFilter.IsNull())
171 myWorkshop->viewer()->removeSelectionFilter(aFilter);
175 void PartSet_Module::registerValidators()
177 //Registering of validators
178 SessionPtr aMgr = ModelAPI_Session::get();
179 ModelAPI_ValidatorsFactory* aFactory = aMgr->validators();
180 aFactory->registerValidator("PartSet_DistanceSelection", new PartSet_DistanceSelection);
181 aFactory->registerValidator("PartSet_LengthSelection", new PartSet_LengthSelection);
182 aFactory->registerValidator("PartSet_PerpendicularSelection", new PartSet_PerpendicularSelection);
183 aFactory->registerValidator("PartSet_ParallelSelection", new PartSet_ParallelSelection);
184 aFactory->registerValidator("PartSet_RadiusSelection", new PartSet_RadiusSelection);
185 aFactory->registerValidator("PartSet_RigidSelection", new PartSet_RigidSelection);
186 aFactory->registerValidator("PartSet_CoincidentSelection", new PartSet_CoincidentSelection);
187 aFactory->registerValidator("PartSet_HVDirSelection", new PartSet_HVDirSelection);
188 aFactory->registerValidator("PartSet_TangentSelection", new PartSet_TangentSelection);
189 aFactory->registerValidator("PartSet_FilletSelection", new PartSet_FilletSelection);
191 aFactory->registerValidator("PartSet_DifferentObjects", new PartSet_DifferentObjectsValidator);
192 aFactory->registerValidator("PartSet_DifferentShapes", new ModelAPI_ShapeValidator);
194 aFactory->registerValidator("GeomValidators_ShapeType", new GeomValidators_ShapeType);
195 aFactory->registerValidator("GeomValidators_Face", new GeomValidators_Face);
197 aFactory->registerValidator("GeomValidators_ConstructionComposite",
198 new GeomValidators_ConstructionComposite);
200 aFactory->registerValidator("GeomValidators_ZeroOffset",
201 new GeomValidators_ZeroOffset);
203 aFactory->registerValidator("GeomValidators_BooleanArguments",
204 new GeomValidators_BooleanArguments);
206 aFactory->registerValidator("PartSet_SketchEntityValidator",
207 new PartSet_SketchEntityValidator);
209 aFactory->registerValidator("PartSet_SameTypeAttr",
210 new PartSet_SameTypeAttrValidator);
213 void PartSet_Module::registerFilters()
215 //Registering of selection filters
216 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
217 ModuleBase_FilterFactory* aFactory = aConnector->selectionFilters();
220 void PartSet_Module::registerProperties()
222 Config_PropManager::registerProp("Sketch planes", "planes_size", "Size", Config_Prop::Double,
224 Config_PropManager::registerProp("Sketch planes", "planes_thickness", "Thickness",
225 Config_Prop::Integer, SKETCH_WIDTH);
228 void PartSet_Module::onOperationCommitted(ModuleBase_Operation* theOperation)
230 if (PartSet_SketcherMgr::isNestedSketchOperation(theOperation)) {
231 mySketchMgr->commitNestedSketch(theOperation);
234 if (theOperation->isEditOperation())
236 // the selection is cleared after commit the create operation
237 // in order to do not use the same selected objects in the restarted operation
238 // for common behaviour, the selection is cleared even if the operation is not restarted
239 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
240 XGUI_Workshop* aWorkshop = aConnector->workshop();
241 aWorkshop->selector()->clearSelection();
243 /// Restart sketcher operations automatically
244 FeaturePtr aFeature = theOperation->feature();
245 std::shared_ptr<SketchPlugin_Feature> aSPFeature =
246 std::dynamic_pointer_cast<SketchPlugin_Feature>(aFeature);
247 if (aSPFeature && (myRestartingMode == RM_LastFeatureUsed ||
248 myRestartingMode == RM_EmptyFeatureUsed)) {
249 myLastOperationId = theOperation->id();
250 myLastFeature = myRestartingMode == RM_LastFeatureUsed ? theOperation->feature() : FeaturePtr();
252 launchOperation(myLastOperationId);
254 breakOperationSequence();
257 void PartSet_Module::breakOperationSequence()
259 myLastOperationId = "";
260 myLastFeature = FeaturePtr();
261 myRestartingMode = RM_None;
264 void PartSet_Module::onOperationAborted(ModuleBase_Operation* theOperation)
266 breakOperationSequence();
269 void PartSet_Module::onOperationStarted(ModuleBase_Operation* theOperation)
271 // z layer is created for all started operations in order to visualize operation AIS presentation
273 Handle(V3d_Viewer) aViewer = myWorkshop->viewer()->AISContext()->CurrentViewer();
274 aViewer->AddZLayer(myVisualLayerId);
276 if (PartSet_SketcherMgr::isSketchOperation(theOperation)) {
277 mySketchMgr->startSketch(theOperation);
279 else if (PartSet_SketcherMgr::isNestedSketchOperation(theOperation)) {
280 mySketchMgr->startNestedSketch(theOperation);
283 myCustomPrs->activate(theOperation->feature());
286 void PartSet_Module::onOperationStopped(ModuleBase_Operation* theOperation)
288 // the custom presentation should be deactivated before stop sketch,
289 // because it uses the active sketch of the sketch manager without checking if it is not null
290 Handle(V3d_Viewer) aViewer = myWorkshop->viewer()->AISContext()->CurrentViewer();
291 aViewer->RemoveZLayer(myVisualLayerId);
293 myCustomPrs->deactivate();
295 if (PartSet_SketcherMgr::isSketchOperation(theOperation)) {
296 mySketchMgr->stopSketch(theOperation);
298 else if (PartSet_SketcherMgr::isNestedSketchOperation(theOperation)) {
299 mySketchMgr->stopNestedSketch(theOperation);
303 ModuleBase_Operation* PartSet_Module::currentOperation() const
305 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
306 XGUI_OperationMgr* anOpMgr = aConnector->workshop()->operationMgr();
307 return anOpMgr->currentOperation();
310 bool PartSet_Module::canUndo() const
312 bool aCanUndo = false;
313 SessionPtr aMgr = ModelAPI_Session::get();
314 if (aMgr->hasModuleDocument() && aMgr->canUndo()) {
315 aCanUndo = !aMgr->isOperation();
316 if (!aCanUndo) // check the enable state additionally by sketch manager
317 aCanUndo = aMgr->canUndo();
322 bool PartSet_Module::canRedo() const
324 bool aCanRedo = false;
325 SessionPtr aMgr = ModelAPI_Session::get();
326 if (aMgr->hasModuleDocument() && aMgr->canRedo()) {
327 aCanRedo = !aMgr->isOperation();
328 if (!aCanRedo) // check the enable state additionally by sketch manager
329 aCanRedo = aMgr->canRedo();
334 bool PartSet_Module::canCommitOperation() const
336 return mySketchMgr->canCommitOperation();
339 bool PartSet_Module::canDisplayObject(const ObjectPtr& theObject) const
341 // the sketch manager put the restriction to the objects display
342 return mySketchMgr->canDisplayObject(theObject);
345 bool PartSet_Module::canActivateSelection(const ObjectPtr& theObject) const
347 bool aCanActivate = ModuleBase_IModule::canActivateSelection(theObject);
349 ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
350 bool isSketchOp = PartSet_SketcherMgr::isSketchOperation(anOperation),
351 isNestedOp = PartSet_SketcherMgr::isNestedSketchOperation(anOperation);
352 if (isSketchOp || isNestedOp) {
353 // in active sketch operation it is possible to activate operation object in selection
354 // in the edit operation, e.g. points of the line can be moved when the line is edited
355 aCanActivate = aCanActivate || anOperation->isEditOperation();
360 bool PartSet_Module::addViewerMenu(QMenu* theMenu, const QMap<QString, QAction*>& theStdActions) const
362 return myMenuMgr->addViewerMenu(theMenu, theStdActions);
365 void PartSet_Module::activeSelectionModes(QIntList& theModes)
368 if (mySketchMgr->activeSketch().get())
369 PartSet_SketcherMgr::sketchSelectionModes(theModes);
372 bool PartSet_Module::isMouseOverWindow()
374 return mySketchMgr->isMouseOverWindow();
377 void PartSet_Module::propertyPanelDefined(ModuleBase_Operation* theOperation)
379 ModuleBase_IPropertyPanel* aPanel = theOperation->propertyPanel();
380 if (PartSet_SketcherMgr::isSketchOperation(theOperation) && (theOperation->isEditOperation())) {
381 // we have to manually activate the sketch label in edit mode
382 aPanel->activateWidget(aPanel->modelWidgets().first());
386 // Restart last operation type
387 if ((theOperation->id() == myLastOperationId) && myLastFeature) {
388 ModuleBase_ModelWidget* aWgt = aPanel->activeWidget();
389 if (theOperation->id().toStdString() == SketchPlugin_Line::ID()) {
390 // Initialise new line with first point equal to end of previous
391 PartSet_WidgetPoint2D* aPnt2dWgt = dynamic_cast<PartSet_WidgetPoint2D*>(aWgt);
393 std::shared_ptr<ModelAPI_Data> aData = myLastFeature->data();
394 std::shared_ptr<GeomDataAPI_Point2D> aPoint =
395 std::dynamic_pointer_cast<GeomDataAPI_Point2D>(aData->attribute(SketchPlugin_Line::END_ID()));
397 aPnt2dWgt->setPoint(aPoint->x(), aPoint->y());
398 PartSet_Tools::setConstraints(mySketchMgr->activeSketch(), theOperation->feature(),
399 aWgt->attributeID(), aPoint->x(), aPoint->y());
400 aPanel->activateNextWidget(aPnt2dWgt);
408 void PartSet_Module::onSelectionChanged()
410 ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
414 bool isSketcherOp = false;
415 // An edit operation is enable only if the current opeation is the sketch operation
416 if (mySketchMgr->activeSketch()) {
417 if (PartSet_Tools::sketchPlane(mySketchMgr->activeSketch()))
418 isSketcherOp = PartSet_SketcherMgr::isSketchOperation(aOperation);
421 // Editing of constraints can be done on selection
422 ModuleBase_ISelection* aSelect = myWorkshop->selection();
423 QList<ModuleBase_ViewerPrs> aSelected = aSelect->getSelected();
424 if (aSelected.size() == 1) {
425 ModuleBase_ViewerPrs aPrs = aSelected.first();
426 ObjectPtr aObject = aPrs.object();
427 FeaturePtr aFeature = ModelAPI_Feature::feature(aObject);
429 std::string aId = aFeature->getKind();
430 if ((aId == SketchPlugin_ConstraintRadius::ID()) ||
431 (aId == SketchPlugin_ConstraintLength::ID()) ||
432 (aId == SketchPlugin_ConstraintDistance::ID())) {
433 editFeature(aFeature);
440 void PartSet_Module::onKeyRelease(ModuleBase_IViewWindow* theWnd, QKeyEvent* theEvent)
442 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
443 XGUI_OperationMgr* anOpMgr = aConnector->workshop()->operationMgr();
444 anOpMgr->onKeyReleased(theEvent);
447 void PartSet_Module::onEnterReleased()
449 myRestartingMode = RM_EmptyFeatureUsed;
452 void PartSet_Module::onOperationActivatedByPreselection()
454 ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
455 if(anOperation && PartSet_SketcherMgr::isNestedSketchOperation(anOperation)) {
456 // Set final definitions if they are necessary
457 //propertyPanelDefined(aOperation);
459 /// Commit sketcher operations automatically
460 anOperation->commit();
464 void PartSet_Module::onNoMoreWidgets()
466 ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
468 if (PartSet_SketcherMgr::isNestedSketchOperation(anOperation)) {
469 if (myRestartingMode != RM_Forbided)
470 myRestartingMode = RM_LastFeatureUsed;
471 anOperation->commit();
476 void PartSet_Module::onVertexSelected()
478 ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
479 if (aOperation->id().toStdString() == SketchPlugin_Line::ID()) {
480 /// If last line finished on vertex the lines creation sequence has to be break
481 ModuleBase_IPropertyPanel* aPanel = aOperation->propertyPanel();
482 ModuleBase_ModelWidget* anActiveWidget = aPanel->activeWidget();
483 const QList<ModuleBase_ModelWidget*>& aWidgets = aPanel->modelWidgets();
484 QList<ModuleBase_ModelWidget*>::const_iterator anIt = aWidgets.begin(), aLast = aWidgets.end();
485 bool aFoundWidget = false;
486 bool aFoundObligatory = false;
487 for (; anIt != aLast && !aFoundObligatory; anIt++) {
489 aFoundWidget = *anIt == anActiveWidget;
491 aFoundObligatory = (*anIt)->isObligatory();
493 if (!aFoundObligatory)
494 myRestartingMode = RM_Forbided;
498 ModuleBase_ModelWidget* PartSet_Module::createWidgetByType(const std::string& theType, QWidget* theParent,
499 Config_WidgetAPI* theWidgetApi, std::string theParentId)
501 ModuleBase_IWorkshop* aWorkshop = workshop();
502 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(aWorkshop);
503 XGUI_Workshop* aXUIWorkshop = aConnector->workshop();
504 ModuleBase_ModelWidget* aWgt = NULL;
505 if (theType == "sketch-start-label") {
506 PartSet_WidgetSketchLabel* aLabelWgt = new PartSet_WidgetSketchLabel(theParent, aWorkshop,
507 theWidgetApi, theParentId, mySketchMgr->isConstraintsShown());
508 connect(aLabelWgt, SIGNAL(planeSelected(const std::shared_ptr<GeomAPI_Pln>&)),
509 mySketchMgr, SLOT(onPlaneSelected(const std::shared_ptr<GeomAPI_Pln>&)));
510 connect(aLabelWgt, SIGNAL(showConstraintToggled(bool)),
511 mySketchMgr, SLOT(onShowConstraintsToggle(bool)));
513 } else if (theType == "sketch-2dpoint_selector") {
514 PartSet_WidgetPoint2D* aPointWgt = new PartSet_WidgetPoint2D(theParent, aWorkshop,
515 theWidgetApi, theParentId);
516 aPointWgt->setSketch(mySketchMgr->activeSketch());
517 connect(aPointWgt, SIGNAL(vertexSelected()), this, SLOT(onVertexSelected()));
519 } else if (theType == "point2ddistance") {
520 PartSet_WidgetPoint2dDistance* aDistanceWgt = new PartSet_WidgetPoint2dDistance(theParent,
521 aWorkshop, theWidgetApi, theParentId);
522 aDistanceWgt->setSketch(mySketchMgr->activeSketch());
524 } else if(theType == "point2dangle") {
525 PartSet_WidgetPoint2dAngle* anAngleWgt = new PartSet_WidgetPoint2dAngle(theParent,
526 aWorkshop, theWidgetApi, theParentId);
527 anAngleWgt->setSketch(mySketchMgr->activeSketch());
529 } else if (theType == "sketch_shape_selector") {
530 PartSet_WidgetShapeSelector* aShapeSelectorWgt =
531 new PartSet_WidgetShapeSelector(theParent, aWorkshop, theWidgetApi, theParentId);
532 aShapeSelectorWgt->setSketcher(mySketchMgr->activeSketch());
533 aWgt = aShapeSelectorWgt;
534 } else if (theType == "sketch_multi_selector") {
535 PartSet_WidgetMultiSelector* aShapeSelectorWgt =
536 new PartSet_WidgetMultiSelector(theParent, aWorkshop, theWidgetApi, theParentId);
537 aShapeSelectorWgt->setSketcher(mySketchMgr->activeSketch());
538 aWgt = aShapeSelectorWgt;
539 } else if (theType == WDG_DOUBLEVALUE_EDITOR) {
540 aWgt = new PartSet_WidgetEditor(theParent, aWorkshop, theWidgetApi, theParentId);
541 } else if (theType == "export_file_selector") {
542 aWgt = new PartSet_WidgetFileSelector(theParent, aWorkshop, theWidgetApi, theParentId);
543 } else if (theType == "sketch_launcher") {
544 aWgt = new PartSet_WidgetSketchCreator(theParent, this, theWidgetApi, theParentId);
550 bool PartSet_Module::deleteObjects()
552 SessionPtr aMgr = ModelAPI_Session::get();
553 // 1. check whether the delete should be processed in the module
554 ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
555 bool isSketchOp = PartSet_SketcherMgr::isSketchOperation(anOperation),
556 isNestedOp = PartSet_SketcherMgr::isNestedSketchOperation(anOperation);
557 if (isSketchOp || isNestedOp) {
558 // 2. find selected presentations
559 // selected objects should be collected before the current operation abort because
560 // the abort leads to selection lost on constraint objects. It can be corrected after #386 issue
561 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
562 XGUI_Workshop* aWorkshop = aConnector->workshop();
563 ModuleBase_ISelection* aSel = workshop()->selection();
564 QObjectPtrList aSelectedObj = aSel->selectedPresentations();
565 // if there are no selected objects in the viewer, that means that the selection in another
566 // place cased this method. It is necessary to return the false value to understande in above
567 // method that delete is not processed
568 if (aSelectedObj.count() == 0)
571 // avoid delete of the objects, which are not belong to the current sketch
572 // in order to do not delete results of other sketches
573 QObjectPtrList aSketchObjects;
574 QObjectPtrList::const_iterator anIt = aSelectedObj.begin(), aLast = aSelectedObj.end();
575 for ( ; anIt != aLast; anIt++) {
576 ObjectPtr anObject = *anIt;
577 if (mySketchMgr->isObjectOfSketch(anObject)) {
578 // sketch feature should be used in this list because workshop deletes features only
579 // results are skipped
580 FeaturePtr aSketchFeature = ModelAPI_Feature::feature(anObject);
581 aSketchObjects.append(aSketchFeature);
584 // if the selection contains only local selected presentations from other sketches,
585 // the Delete operation should not be done at all
586 if (aSketchObjects.size() == 0)
589 // the active nested sketch operation should be aborted unconditionally
591 anOperation->abort();
593 // 3. start operation
594 QString aDescription = aWorkshop->contextMenuMgr()->action("DELETE_CMD")->text();
595 aMgr->startOperation(aDescription.toStdString());
597 // 4. delete features
598 // sketch feature should be skipped, only sub-features can be removed
599 // when sketch operation is active
600 std::set<FeaturePtr> anIgnoredFeatures;
601 anIgnoredFeatures.insert(mySketchMgr->activeSketch());
602 aWorkshop->deleteFeatures(aSketchObjects, anIgnoredFeatures);
605 aWorkshop->displayer()->updateViewer();
606 aMgr->finishOperation();
608 bool isPartRemoved = false;
609 // Delete part with help of PartSet plugin
610 // TODO: the deleted objects has to be processed by multiselection
611 QObjectPtrList aObjects = myWorkshop->selection()->selectedObjects();
612 if (aObjects.size() == 1) {
613 ObjectPtr aObj = aObjects.first();
614 FeaturePtr aFeature = std::dynamic_pointer_cast<ModelAPI_Feature>(aObj);
615 if (aFeature.get() && (aFeature->getKind() == PartSetPlugin_Part::ID())) {
616 // Remove feature should be created in the document of the part results
617 ResultPtr aPartResult = aFeature->firstResult();
618 if (aPartResult.get()) {
619 std::shared_ptr<ModelAPI_ResultPart> aPart =
620 std::dynamic_pointer_cast<ModelAPI_ResultPart>(aPartResult);
621 DocumentPtr aPartDoc = aPart->partDoc();
622 if (aPartDoc.get()) {
623 aMgr->startOperation(PartSetPlugin_Remove::ID());
624 FeaturePtr aFeature = aPartDoc->addFeature(PartSetPlugin_Remove::ID());
626 aMgr->finishOperation();
627 isPartRemoved = true;
632 return isPartRemoved;
637 void PartSet_Module::onFeatureTriggered()
639 SessionPtr aMgr = ModelAPI_Session::get();
640 // 1. check whether the delete should be processed in the module
641 ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
642 bool isNestedOp = PartSet_SketcherMgr::isNestedCreateOperation(anOperation);
644 // in case if in the viewer nothing is displayed, the create operation should not be
645 // comitted even if all values of the feature are initialized
646 if (!mySketchMgr->canDisplayCurrentCreatedFeature()) {
647 QAction* aCmd = dynamic_cast<QAction*>(sender());
648 //Do nothing on uncheck
649 if (aCmd->isCheckable() && !aCmd->isChecked())
652 // the action information should be saved before the operation is aborted
653 // because this abort leads to update command status, which unchecks this action
654 anOperation->abort();
656 launchOperation(aCmd->data().toString());
659 ModuleBase_IModule::onFeatureTriggered();
662 void PartSet_Module::onObjectDisplayed(ObjectPtr theObject, AISObjectPtr theAIS)
664 Handle(AIS_InteractiveObject) anAIS = theAIS->impl<Handle(AIS_InteractiveObject)>();
665 if (!anAIS.IsNull()) {
666 Handle(AIS_InteractiveContext) aCtx = anAIS->GetContext();
667 Handle(AIS_Dimension) aDim = Handle(AIS_Dimension)::DownCast(anAIS);
668 if (!aDim.IsNull()) {
669 aCtx->SetZLayer(aDim, myVisualLayerId);
671 Handle(SketcherPrs_SymbolPrs) aCons = Handle(SketcherPrs_SymbolPrs)::DownCast(anAIS);
673 aCtx->SetZLayer(aCons, myVisualLayerId);
678 void PartSet_Module::onViewTransformed(int theTrsfType)
680 // Set length of arrows constant in pixel size
681 // if the operation is panning or rotate or panglobal then do nothing
682 if ((theTrsfType == 1) || (theTrsfType == 3) || (theTrsfType == 4))
685 ModuleBase_IViewer* aViewer = myWorkshop->viewer();
686 //Handle(V3d_View) aView = aViewer->activeView();
688 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(myWorkshop);
689 XGUI_Workshop* aWorkshop = aConnector->workshop();
690 XGUI_Displayer* aDisplayer = aWorkshop->displayer();
691 Handle(AIS_InteractiveContext) aContext = aViewer->AISContext();
693 Handle(V3d_Viewer) aV3dViewer = aContext->CurrentViewer();
694 Handle(V3d_View) aView;
696 for (aV3dViewer->InitDefinedViews();
697 aV3dViewer->MoreDefinedViews();
698 aV3dViewer->NextDefinedViews()) {
699 Handle(V3d_View) aV = aV3dViewer->DefinedView();
700 double aS = aV->Scale();
708 double aLen = aView->Convert(20);
710 double aPrevLen = SketcherPrs_Tools::getArrowSize();
711 SketcherPrs_Tools::setArrowSize(aLen);
712 const double aPrevScale = aViewer->Scale(aViewer->activeView());
713 const double aCurScale = aViewer->activeView()->Camera()->Scale();
714 aViewer->SetScale(aViewer->activeView(), aCurScale);
715 SketcherPrs_Tools::setTextHeight (aCurScale / aPrevScale * SketcherPrs_Tools::getTextHeight());
716 bool isModified = false;
717 QList<AISObjectPtr> aPrsList = aDisplayer->displayedPresentations();
718 foreach (AISObjectPtr aAIS, aPrsList) {
719 Handle(AIS_InteractiveObject) aAisObj = aAIS->impl<Handle(AIS_InteractiveObject)>();
721 Handle(AIS_Dimension) aDim = Handle(AIS_Dimension)::DownCast(aAisObj);
722 if (!aDim.IsNull()) {
723 aDim->DimensionAspect()->ArrowAspect()->SetLength(aLen);
724 aContext->Redisplay(aDim, false);
729 aDisplayer->updateViewer();
732 void PartSet_Module::customizeObject(ObjectPtr theObject)
734 if (myCustomPrs->isActive())
735 myCustomPrs->customize(theObject);
738 void PartSet_Module::customizeObjectBrowser(QWidget* theObjectBrowser)
740 XGUI_ObjectsBrowser* aOB = dynamic_cast<XGUI_ObjectsBrowser*>(theObjectBrowser);
742 QLineEdit* aLabel = aOB->activeDocLabel();
743 QPalette aPalet = aLabel->palette();
744 aPalet.setColor(QPalette::Text, QColor(0, 72, 140));
745 aLabel->setPalette(aPalet);
746 aOB->treeView()->setExpandsOnDoubleClick(false);
747 connect(aOB->treeView(), SIGNAL(doubleClicked(const QModelIndex&)),
748 SLOT(onTreeViewDoubleClick(const QModelIndex&)));
749 connect(aOB, SIGNAL(headerMouseDblClicked(const QModelIndex&)),
750 SLOT(onTreeViewDoubleClick(const QModelIndex&)));
751 connect(aOB->treeView(), SIGNAL(doubleClicked(const QModelIndex&)),
752 myDataModel, SLOT(onMouseDoubleClick(const QModelIndex&)));
756 ObjectPtr PartSet_Module::findPresentedObject(const AISObjectPtr& theAIS) const
759 ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
761 /// If last line finished on vertex the lines creation sequence has to be break
762 ModuleBase_IPropertyPanel* aPanel = aOperation->propertyPanel();
763 ModuleBase_ModelWidget* anActiveWidget = aPanel->activeWidget();
764 // if there is an active widget, find the presented object in it
766 anActiveWidget = aPanel->preselectionWidget();
768 ModuleBase_WidgetValidated* aWidgetValidated = dynamic_cast<ModuleBase_WidgetValidated*>
770 if (aWidgetValidated)
771 anObject = aWidgetValidated->findPresentedObject(theAIS);
776 void PartSet_Module::addObjectBrowserMenu(QMenu* theMenu) const
778 QObjectPtrList aObjects = myWorkshop->selection()->selectedObjects();
779 int aSelected = aObjects.size();
780 SessionPtr aMgr = ModelAPI_Session::get();
781 if (aSelected == 1) {
782 bool hasResult = false;
783 bool hasFeature = false;
784 bool hasParameter = false;
785 bool hasSubFeature = false;
786 ModuleBase_Tools::checkObjects(aObjects, hasResult, hasFeature, hasParameter, hasSubFeature);
788 ObjectPtr aObject = aObjects.first();
790 ResultPartPtr aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aObject);
791 FeaturePtr aPartFeature = std::dynamic_pointer_cast<ModelAPI_Feature>(aObject);
792 bool isPart = aPart.get() ||
793 (aPartFeature.get() && (aPartFeature->getKind() == PartSetPlugin_Part::ID()));
795 DocumentPtr aPartDoc;
797 aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aPartFeature->firstResult());
799 if (aPart.get()) // this may be null is Part feature is disabled
800 aPartDoc = aPart->partDoc();
801 if (aMgr->activeDocument() == aPartDoc)
802 theMenu->addAction(myMenuMgr->action("DEACTIVATE_PART_CMD"));
804 theMenu->addAction(myMenuMgr->action("ACTIVATE_PART_CMD"));
805 } else if (aObject->document() == aMgr->activeDocument()) {
806 if (hasParameter || hasFeature)
807 theMenu->addAction(myMenuMgr->action("EDIT_CMD"));
809 } else { // If feature is 0 the it means that selected root object (document)
810 if (aMgr->activeDocument() != aMgr->moduleDocument())
811 theMenu->addAction(myMenuMgr->action("ACTIVATE_PARTSET_CMD"));
813 } else if (aSelected == 0) {
814 // if there is no selection then it means that upper label is selected
815 QModelIndexList aIndexes = myWorkshop->selection()->selectedIndexes();
816 if (aIndexes.size() == 0) // it means that selection happens in top label outside of tree view
817 if (aMgr->activeDocument() != aMgr->moduleDocument())
818 theMenu->addAction(myMenuMgr->action("ACTIVATE_PARTSET_CMD"));
820 bool aCanDeactivate = (myWorkshop->currentOperation() == 0);
821 myMenuMgr->action("ACTIVATE_PARTSET_CMD")->setEnabled(aCanDeactivate);
822 myMenuMgr->action("DEACTIVATE_PART_CMD")->setEnabled(aCanDeactivate);
823 myMenuMgr->action("ACTIVATE_PART_CMD")->setEnabled(aCanDeactivate);
826 void PartSet_Module::processEvent(const std::shared_ptr<Events_Message>& theMessage)
828 if (theMessage->eventID() == Events_Loop::loop()->eventByName(EVENT_DOCUMENT_CHANGED)) {
829 // Do not change activation of parts if an operation active
830 if (myWorkshop->currentOperation() && myWorkshop->currentOperation()->id().toStdString() != PartSetPlugin_Part::ID())
832 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(myWorkshop);
833 XGUI_Workshop* aWorkshop = aConnector->workshop();
834 XGUI_DataTree* aTreeView = aWorkshop->objectBrowser()->treeView();
835 QLineEdit* aLabel = aWorkshop->objectBrowser()->activeDocLabel();
836 QPalette aPalet = aLabel->palette();
838 SessionPtr aMgr = ModelAPI_Session::get();
839 DocumentPtr aActiveDoc = aMgr->activeDocument();
840 DocumentPtr aDoc = aMgr->moduleDocument();
841 QModelIndex aOldIndex = myDataModel->activePartTree();
842 if (aActiveDoc == aDoc) {
843 if (aOldIndex.isValid())
844 aTreeView->setExpanded(aOldIndex, false);
845 myDataModel->deactivatePart();
846 aPalet.setColor(QPalette::Text, QColor(0, 72, 140));
848 std::string aGrpName = ModelAPI_ResultPart::group();
849 for (int i = 0; i < aDoc->size(aGrpName); i++) {
850 ResultPartPtr aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aDoc->object(aGrpName, i));
851 if (aPart->partDoc() == aActiveDoc) {
852 QModelIndex aIndex = myDataModel->partIndex(aPart);
853 if (myDataModel->activatePart(aIndex)) {
854 if (aOldIndex.isValid())
855 aTreeView->setExpanded(aOldIndex, false);
856 aTreeView->setExpanded(myDataModel->activePartTree(), true);
857 aPalet.setColor(QPalette::Text, Qt::black);
863 aLabel->setPalette(aPalet);
864 aWorkshop->updateCommandStatus();
866 // Update displayed objects in order to update active color
867 XGUI_Displayer* aDisplayer = aWorkshop->displayer();
868 QObjectPtrList aObjects = aDisplayer->displayedObjects();
869 foreach(ObjectPtr aObj, aObjects)
870 aDisplayer->redisplay(aObj, false);
871 aDisplayer->updateViewer();
875 void PartSet_Module::onTreeViewDoubleClick(const QModelIndex& theIndex)
877 if (myWorkshop->currentOperation()) // Do not change activation of parts if an operation active
879 SessionPtr aMgr = ModelAPI_Session::get();
880 if (!theIndex.isValid()) {
881 aMgr->setActiveDocument(aMgr->moduleDocument());
884 if (theIndex.column() != 0) // Use only first column
886 ObjectPtr aObj = myDataModel->object(theIndex);
887 ResultPartPtr aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aObj);
888 if (!aPart.get()) { // Probably this is Feature
889 FeaturePtr aPartFeature = std::dynamic_pointer_cast<ModelAPI_Feature>(aObj);
890 if (aPartFeature.get() && (aPartFeature->getKind() == PartSetPlugin_Part::ID())) {
891 aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aPartFeature->firstResult());
894 if (aPart.get()) { // if this is a part
895 if (aPart->partDoc() == aMgr->activeDocument()) {
896 aMgr->setActiveDocument(aMgr->moduleDocument());