1 // Copyright (C) 2014-20xx CEA/DEN, EDF R&D
3 #include "PartSet_Module.h"
4 #include "PartSet_WidgetSketchLabel.h"
5 #include "PartSet_Validators.h"
6 #include "PartSet_Tools.h"
7 #include "PartSet_WidgetPoint2d.h"
8 #include "PartSet_WidgetPoint2dDistance.h"
9 #include "PartSet_WidgetShapeSelector.h"
10 #include "PartSet_WidgetPoint2dAngle.h"
11 #include "PartSet_WidgetMultiSelector.h"
12 #include "PartSet_WidgetEditor.h"
13 #include "PartSet_WidgetFileSelector.h"
14 #include "PartSet_WidgetSketchCreator.h"
15 #include "PartSet_SketcherMgr.h"
16 #include "PartSet_MenuMgr.h"
17 #include "PartSet_CustomPrs.h"
18 #include "PartSet_IconFactory.h"
20 #include "PartSet_Filters.h"
21 #include "PartSet_FilterInfinite.h"
23 #include <PartSetPlugin_Remove.h>
24 #include <PartSetPlugin_Part.h>
25 #include <PartSetPlugin_Duplicate.h>
27 #include <ModuleBase_Operation.h>
28 #include <ModuleBase_OperationAction.h>
29 #include <ModuleBase_IViewer.h>
30 #include <ModuleBase_IViewWindow.h>
31 #include <ModuleBase_IPropertyPanel.h>
32 #include <ModuleBase_WidgetEditor.h>
33 #include <ModuleBase_WidgetValidated.h>
34 #include <ModuleBase_FilterFactory.h>
35 #include <ModuleBase_Tools.h>
36 #include <ModuleBase_OperationFeature.h>
38 #include <GeomValidators_ShapeType.h>
39 #include <GeomValidators_Finite.h>
40 #include <GeomValidators_Face.h>
41 #include <GeomValidators_ConstructionComposite.h>
42 #include <GeomValidators_ZeroOffset.h>
43 #include <GeomValidators_BooleanArguments.h>
44 #include <GeomValidators_Different.h>
47 #include <ModelAPI_Object.h>
48 #include <ModelAPI_Events.h>
49 #include <ModelAPI_Validator.h>
50 #include <ModelAPI_Data.h>
51 #include <ModelAPI_Session.h>
52 #include <GeomValidators_DifferentShapes.h>
53 #include <ModelAPI_ResultBody.h>
54 #include <ModelAPI_AttributeString.h>
56 #include <GeomDataAPI_Point2D.h>
57 #include <GeomDataAPI_Point.h>
58 #include <GeomDataAPI_Dir.h>
60 #include <XGUI_Displayer.h>
61 #include <XGUI_Workshop.h>
62 #include <XGUI_OperationMgr.h>
63 #include <XGUI_PropertyPanel.h>
64 #include <XGUI_ModuleConnector.h>
65 #include <XGUI_ContextMenuMgr.h>
66 #include <XGUI_Tools.h>
67 #include <XGUI_ObjectsBrowser.h>
68 #include <XGUI_SelectionMgr.h>
69 #include <XGUI_DataModel.h>
70 #include <XGUI_ErrorMgr.h>
72 #include <SketchPlugin_Feature.h>
73 #include <SketchPlugin_Sketch.h>
74 #include <SketchPlugin_Line.h>
75 #include <SketchPlugin_Arc.h>
76 #include <SketchPlugin_Circle.h>
77 #include <SketchPlugin_Point.h>
78 #include <SketchPlugin_ConstraintAngle.h>
79 #include <SketchPlugin_ConstraintLength.h>
80 #include <SketchPlugin_ConstraintDistance.h>
81 #include <SketchPlugin_ConstraintParallel.h>
82 #include <SketchPlugin_ConstraintPerpendicular.h>
83 #include <SketchPlugin_ConstraintRadius.h>
85 #include <SketcherPrs_SymbolPrs.h>
86 #include <SketcherPrs_Tools.h>
88 #include <Events_Loop.h>
89 #include <Config_PropManager.h>
90 #include <Config_Keywords.h>
92 #include <StdSelect_TypeOfFace.hxx>
93 #include <TopoDS_Vertex.hxx>
95 #include <TopoDS_Shape.hxx>
96 #include <BRep_Tool.hxx>
97 #include <AIS_Dimension.hxx>
100 #include <QMouseEvent>
103 #include <QApplication>
104 #include <QMessageBox>
105 #include <QMainWindow>
108 #include <GeomAlgoAPI_FaceBuilder.h>
109 #include <GeomDataAPI_Dir.h>
111 #include <SelectMgr_ListIteratorOfListOfFilter.hxx>
117 /*!Create and return new instance of XGUI_Module*/
118 extern "C" PARTSET_EXPORT ModuleBase_IModule* createModule(ModuleBase_IWorkshop* theWshop)
120 return new PartSet_Module(theWshop);
123 PartSet_Module::PartSet_Module(ModuleBase_IWorkshop* theWshop)
124 : ModuleBase_IModule(theWshop),
125 myRestartingMode(RM_None), myVisualLayerId(0)
127 new PartSet_IconFactory();
129 mySketchMgr = new PartSet_SketcherMgr(this);
130 #ifdef ModuleDataModel
131 myDataModel = new PartSet_DocumentDataModel(this);
134 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(theWshop);
135 XGUI_Workshop* aWorkshop = aConnector->workshop();
137 XGUI_OperationMgr* anOpMgr = aWorkshop->operationMgr();
138 connect(anOpMgr, SIGNAL(keyEnterReleased()), this, SLOT(onEnterReleased()));
139 connect(anOpMgr, SIGNAL(operationActivatedByPreselection()),
140 this, SLOT(onOperationActivatedByPreselection()));
142 ModuleBase_IViewer* aViewer = theWshop->viewer();
143 connect(aViewer, SIGNAL(keyRelease(ModuleBase_IViewWindow*, QKeyEvent*)),
144 this, SLOT(onKeyRelease(ModuleBase_IViewWindow*, QKeyEvent*)));
145 connect(aViewer, SIGNAL(viewTransformed(int)),
146 SLOT(onViewTransformed(int)));
147 connect(aViewer, SIGNAL(viewCreated(ModuleBase_IViewWindow*)),
148 SLOT(onViewCreated(ModuleBase_IViewWindow*)));
150 myMenuMgr = new PartSet_MenuMgr(this);
151 myCustomPrs = new PartSet_CustomPrs(theWshop);
153 Events_Loop* aLoop = Events_Loop::loop();
154 aLoop->registerListener(this, Events_Loop::eventByName(EVENT_DOCUMENT_CHANGED));
155 aLoop->registerListener(this, Events_Loop::eventByName(EVENT_SOLVER_FAILED));
156 aLoop->registerListener(this, Events_Loop::eventByName(EVENT_SOLVER_REPAIRED));
158 mySelectionFilters.Append(new PartSet_GlobalFilter(myWorkshop));
159 mySelectionFilters.Append(new PartSet_FilterInfinite(myWorkshop));
162 PartSet_Module::~PartSet_Module()
164 SelectMgr_ListIteratorOfListOfFilter aIt(mySelectionFilters);
165 for (; aIt.More(); aIt.Next()) {
166 Handle(SelectMgr_Filter) aFilter = aIt.Value();
167 if (!aFilter.IsNull())
173 void PartSet_Module::activateSelectionFilters()
175 SelectMgr_ListIteratorOfListOfFilter aIt(mySelectionFilters);
176 for (; aIt.More(); aIt.Next()) {
177 Handle(SelectMgr_Filter) aFilter = aIt.Value();
178 if (!aFilter.IsNull())
179 myWorkshop->viewer()->addSelectionFilter(aFilter);
183 void PartSet_Module::deactivateSelectionFilters()
185 SelectMgr_ListIteratorOfListOfFilter aIt(mySelectionFilters);
186 for (; aIt.More(); aIt.Next()) {
187 Handle(SelectMgr_Filter) aFilter = aIt.Value();
188 if (!aFilter.IsNull())
189 myWorkshop->viewer()->removeSelectionFilter(aFilter);
193 void PartSet_Module::registerValidators()
195 //Registering of validators
196 SessionPtr aMgr = ModelAPI_Session::get();
197 ModelAPI_ValidatorsFactory* aFactory = aMgr->validators();
198 aFactory->registerValidator("PartSet_DistanceSelection", new PartSet_DistanceSelection);
199 aFactory->registerValidator("PartSet_LengthSelection", new PartSet_LengthSelection);
200 aFactory->registerValidator("PartSet_PerpendicularSelection", new PartSet_PerpendicularSelection);
201 aFactory->registerValidator("PartSet_ParallelSelection", new PartSet_ParallelSelection);
202 aFactory->registerValidator("PartSet_RadiusSelection", new PartSet_RadiusSelection);
203 aFactory->registerValidator("PartSet_RigidSelection", new PartSet_RigidSelection);
204 aFactory->registerValidator("PartSet_CoincidentSelection", new PartSet_CoincidentSelection);
205 aFactory->registerValidator("PartSet_HVDirSelection", new PartSet_HVDirSelection);
206 aFactory->registerValidator("PartSet_TangentSelection", new PartSet_TangentSelection);
207 aFactory->registerValidator("PartSet_FilletSelection", new PartSet_FilletSelection);
208 aFactory->registerValidator("PartSet_AngleSelection", new PartSet_AngleSelection);
209 aFactory->registerValidator("PartSet_DifferentObjects", new PartSet_DifferentObjectsValidator);
210 aFactory->registerValidator("PartSet_CoincidentAttr", new PartSet_CoincidentAttr);
212 aFactory->registerValidator("GeomValidators_DifferentShapes", new GeomValidators_DifferentShapes);
213 aFactory->registerValidator("GeomValidators_ShapeType", new GeomValidators_ShapeType);
214 aFactory->registerValidator("GeomValidators_Face", new GeomValidators_Face);
215 aFactory->registerValidator("GeomValidators_Finite", new GeomValidators_Finite);
217 aFactory->registerValidator("GeomValidators_ConstructionComposite",
218 new GeomValidators_ConstructionComposite);
220 aFactory->registerValidator("GeomValidators_ZeroOffset",
221 new GeomValidators_ZeroOffset);
223 aFactory->registerValidator("GeomValidators_BooleanArguments",
224 new GeomValidators_BooleanArguments);
226 aFactory->registerValidator("PartSet_SketchEntityValidator",
227 new PartSet_SketchEntityValidator);
229 aFactory->registerValidator("GeomValidators_Different",
230 new GeomValidators_Different);
233 void PartSet_Module::registerFilters()
235 //Registering of selection filters
236 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
237 ModuleBase_FilterFactory* aFactory = aConnector->selectionFilters();
240 void PartSet_Module::registerProperties()
242 Config_PropManager::registerProp("Sketch planes", "planes_size", "Size", Config_Prop::Double,
244 Config_PropManager::registerProp("Sketch planes", "planes_thickness", "Thickness",
245 Config_Prop::Integer, SKETCH_WIDTH);
248 void PartSet_Module::onOperationCommitted(ModuleBase_Operation* theOperation)
250 if (PartSet_SketcherMgr::isNestedSketchOperation(theOperation)) {
251 mySketchMgr->commitNestedSketch(theOperation);
254 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>(theOperation);
255 if (!aFOperation || aFOperation->isEditOperation())
257 // the selection is cleared after commit the create operation
258 // in order to do not use the same selected objects in the restarted operation
259 // for common behaviour, the selection is cleared even if the operation is not restarted
260 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
261 XGUI_Workshop* aWorkshop = aConnector->workshop();
262 aWorkshop->selector()->clearSelection();
264 /// Restart sketcher operations automatically
265 FeaturePtr aFeature = aFOperation->feature();
266 std::shared_ptr<SketchPlugin_Feature> aSPFeature =
267 std::dynamic_pointer_cast<SketchPlugin_Feature>(aFeature);
268 if (aSPFeature && (myRestartingMode == RM_LastFeatureUsed ||
269 myRestartingMode == RM_EmptyFeatureUsed)) {
270 myLastOperationId = aFOperation->id();
271 myLastFeature = myRestartingMode == RM_LastFeatureUsed ? aFOperation->feature() : FeaturePtr();
272 if (!sketchMgr()->sketchSolverError())
273 launchOperation(myLastOperationId);
275 breakOperationSequence();
278 void PartSet_Module::breakOperationSequence()
280 myLastOperationId = "";
281 myLastFeature = FeaturePtr();
282 myRestartingMode = RM_None;
285 void PartSet_Module::onOperationAborted(ModuleBase_Operation* theOperation)
287 breakOperationSequence();
290 void PartSet_Module::onOperationStarted(ModuleBase_Operation* theOperation)
292 if (PartSet_SketcherMgr::isSketchOperation(theOperation)) {
293 mySketchMgr->startSketch(theOperation);
295 else if (PartSet_SketcherMgr::isNestedSketchOperation(theOperation)) {
296 mySketchMgr->startNestedSketch(theOperation);
299 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>(theOperation);
301 myCustomPrs->activate(aFOperation->feature(), true);
304 void PartSet_Module::onOperationResumed(ModuleBase_Operation* theOperation)
306 ModuleBase_IModule::onOperationResumed(theOperation);
308 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>(theOperation);
310 myCustomPrs->activate(aFOperation->feature(), true);
313 void PartSet_Module::onOperationStopped(ModuleBase_Operation* theOperation)
315 bool isModified = myCustomPrs->deactivate(false);
317 if (PartSet_SketcherMgr::isSketchOperation(theOperation)) {
318 mySketchMgr->stopSketch(theOperation);
320 else if (PartSet_SketcherMgr::isNestedSketchOperation(theOperation)) {
321 mySketchMgr->stopNestedSketch(theOperation);
325 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(myWorkshop);
326 XGUI_Displayer* aDisplayer = aConnector->workshop()->displayer();
327 aDisplayer->updateViewer();
331 ModuleBase_Operation* PartSet_Module::currentOperation() const
333 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
334 XGUI_OperationMgr* anOpMgr = aConnector->workshop()->operationMgr();
335 return anOpMgr->currentOperation();
338 bool PartSet_Module::canUndo() const
340 bool aCanUndo = false;
341 SessionPtr aMgr = ModelAPI_Session::get();
342 if (aMgr->hasModuleDocument() && aMgr->canUndo()) {
343 aCanUndo = !aMgr->isOperation();
344 if (!aCanUndo) // check the enable state additionally by sketch manager
345 aCanUndo = aMgr->canUndo();
350 bool PartSet_Module::canRedo() const
352 bool aCanRedo = false;
353 SessionPtr aMgr = ModelAPI_Session::get();
354 if (aMgr->hasModuleDocument() && aMgr->canRedo()) {
355 aCanRedo = !aMgr->isOperation();
356 if (!aCanRedo) // check the enable state additionally by sketch manager
357 aCanRedo = aMgr->canRedo();
362 bool PartSet_Module::canApplyAction(const ObjectPtr& theObject, const QString& theActionId) const
365 if (theActionId == "DELETE_CMD" || theActionId == "MOVE_CMD") {
366 FeaturePtr aFeature = ModelAPI_Feature::feature(theObject);
368 // part features are removed in the PartSet module only.
369 if (aFeature->getKind() == PartSetPlugin_Part::ID())
376 bool PartSet_Module::canCommitOperation() const
378 return mySketchMgr->canCommitOperation();
381 bool PartSet_Module::canEraseObject(const ObjectPtr& theObject) const
383 // the sketch manager put the restriction to the objects erase
384 return mySketchMgr->canEraseObject(theObject);
387 bool PartSet_Module::canDisplayObject(const ObjectPtr& theObject) const
389 // the sketch manager put the restriction to the objects display
390 return mySketchMgr->canDisplayObject(theObject);
393 bool PartSet_Module::canActivateSelection(const ObjectPtr& theObject) const
395 bool aCanActivate = ModuleBase_IModule::canActivateSelection(theObject);
397 ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
398 bool isSketchOp = PartSet_SketcherMgr::isSketchOperation(anOperation),
399 isNestedOp = PartSet_SketcherMgr::isNestedSketchOperation(anOperation);
400 if (isSketchOp || isNestedOp) {
401 // in active sketch operation it is possible to activate operation object in selection
402 // in the edit operation, e.g. points of the line can be moved when the line is edited
403 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>(anOperation);
404 aCanActivate = aCanActivate || (aFOperation && aFOperation->isEditOperation());
409 bool PartSet_Module::addViewerMenu(QMenu* theMenu, const QMap<QString, QAction*>& theStdActions) const
411 return myMenuMgr->addViewerMenu(theMenu, theStdActions);
414 void PartSet_Module::updateViewerMenu(const QMap<QString, QAction*>& theStdActions)
416 myMenuMgr->updateViewerMenu(theStdActions);
419 QString PartSet_Module::getFeatureError(const FeaturePtr& theFeature)
421 QString anError = ModuleBase_IModule::getFeatureError(theFeature);
423 if (anError.isEmpty())
424 anError = sketchMgr()->getFeatureError(theFeature);
426 if (anError.isEmpty()) {
427 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
428 XGUI_OperationMgr* anOpMgr = aConnector->workshop()->operationMgr();
430 if (anOpMgr->isValidationLocked()) {
431 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>
432 (anOpMgr->currentOperation());
433 if (!aFOperation || theFeature == aFOperation->feature())
434 anError = "Validation is locked by the current operation";
440 void PartSet_Module::activeSelectionModes(QIntList& theModes)
443 if (mySketchMgr->activeSketch().get())
444 PartSet_SketcherMgr::sketchSelectionModes(theModes);
447 bool PartSet_Module::isMouseOverWindow()
449 return mySketchMgr->isMouseOverWindow();
452 void PartSet_Module::closeDocument()
457 void PartSet_Module::clearViewer()
459 myCustomPrs->clearPrs();
462 void PartSet_Module::propertyPanelDefined(ModuleBase_Operation* theOperation)
464 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>(theOperation);
468 ModuleBase_IPropertyPanel* aPanel = aFOperation->propertyPanel();
469 if (PartSet_SketcherMgr::isSketchOperation(aFOperation) && (aFOperation->isEditOperation())) {
470 // we have to manually activate the sketch label in edit mode
471 aPanel->activateWidget(aPanel->modelWidgets().first());
475 // Restart last operation type
476 if ((aFOperation->id() == myLastOperationId) && myLastFeature) {
477 ModuleBase_ModelWidget* aWgt = aPanel->activeWidget();
478 if (aFOperation->id().toStdString() == SketchPlugin_Line::ID()) {
479 // Initialise new line with first point equal to end of previous
480 PartSet_WidgetPoint2D* aPnt2dWgt = dynamic_cast<PartSet_WidgetPoint2D*>(aWgt);
482 std::shared_ptr<ModelAPI_Data> aData = myLastFeature->data();
483 std::shared_ptr<GeomDataAPI_Point2D> aPoint =
484 std::dynamic_pointer_cast<GeomDataAPI_Point2D>(aData->attribute(SketchPlugin_Line::END_ID()));
486 aPnt2dWgt->setPoint(aPoint->x(), aPoint->y());
487 PartSet_Tools::setConstraints(mySketchMgr->activeSketch(), aFOperation->feature(),
488 aWgt->attributeID(), aPoint->x(), aPoint->y());
489 aPanel->activateNextWidget(aPnt2dWgt);
497 void PartSet_Module::onSelectionChanged()
499 ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
503 bool isSketcherOp = false;
504 // An edit operation is enable only if the current opeation is the sketch operation
505 if (mySketchMgr->activeSketch()) {
506 if (PartSet_Tools::sketchPlane(mySketchMgr->activeSketch()))
507 isSketcherOp = PartSet_SketcherMgr::isSketchOperation(aOperation);
510 // Editing of constraints can be done on selection
511 ModuleBase_ISelection* aSelect = myWorkshop->selection();
512 QList<ModuleBase_ViewerPrs> aSelected = aSelect->getSelected();
513 if (aSelected.size() == 1) {
514 ModuleBase_ViewerPrs aPrs = aSelected.first();
515 ObjectPtr aObject = aPrs.object();
516 FeaturePtr aFeature = ModelAPI_Feature::feature(aObject);
518 std::string aId = aFeature->getKind();
519 if ((aId == SketchPlugin_ConstraintRadius::ID()) ||
520 (aId == SketchPlugin_ConstraintLength::ID()) ||
521 (aId == SketchPlugin_ConstraintDistance::ID()) ||
522 (aId == SketchPlugin_ConstraintAngle::ID())) {
523 editFeature(aFeature);
530 void PartSet_Module::onKeyRelease(ModuleBase_IViewWindow* theWnd, QKeyEvent* theEvent)
532 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
533 XGUI_OperationMgr* anOpMgr = aConnector->workshop()->operationMgr();
534 anOpMgr->onKeyReleased(theEvent);
537 void PartSet_Module::onEnterReleased()
539 myRestartingMode = RM_EmptyFeatureUsed;
542 void PartSet_Module::onOperationActivatedByPreselection()
544 ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
545 if(anOperation && PartSet_SketcherMgr::isNestedSketchOperation(anOperation)) {
546 // Set final definitions if they are necessary
547 //propertyPanelDefined(aOperation);
549 /// Commit sketcher operations automatically
550 anOperation->commit();
554 void PartSet_Module::onNoMoreWidgets()
556 ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
558 if (PartSet_SketcherMgr::isNestedSketchOperation(anOperation)) {
559 if (myRestartingMode != RM_Forbided)
560 myRestartingMode = RM_LastFeatureUsed;
561 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
562 XGUI_Workshop* aWorkshop = aConnector->workshop();
563 XGUI_OperationMgr* anOpMgr = aWorkshop->operationMgr();
564 // do nothing if the feature can not be applyed
565 if (anOpMgr->isApplyEnabled())
566 anOperation->commit();
571 void PartSet_Module::onVertexSelected()
573 ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
574 if (aOperation->id().toStdString() == SketchPlugin_Line::ID()) {
575 /// If last line finished on vertex the lines creation sequence has to be break
576 ModuleBase_IPropertyPanel* aPanel = aOperation->propertyPanel();
577 ModuleBase_ModelWidget* anActiveWidget = aPanel->activeWidget();
578 const QList<ModuleBase_ModelWidget*>& aWidgets = aPanel->modelWidgets();
579 QList<ModuleBase_ModelWidget*>::const_iterator anIt = aWidgets.begin(), aLast = aWidgets.end();
580 bool aFoundWidget = false;
581 bool aFoundObligatory = false;
582 for (; anIt != aLast && !aFoundObligatory; anIt++) {
584 aFoundWidget = *anIt == anActiveWidget;
586 aFoundObligatory = (*anIt)->isObligatory();
588 if (!aFoundObligatory)
589 myRestartingMode = RM_Forbided;
593 ModuleBase_ModelWidget* PartSet_Module::createWidgetByType(const std::string& theType, QWidget* theParent,
594 Config_WidgetAPI* theWidgetApi, std::string theParentId)
596 ModuleBase_IWorkshop* aWorkshop = workshop();
597 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(aWorkshop);
598 XGUI_Workshop* aXUIWorkshop = aConnector->workshop();
599 ModuleBase_ModelWidget* aWgt = NULL;
600 if (theType == "sketch-start-label") {
601 PartSet_WidgetSketchLabel* aLabelWgt = new PartSet_WidgetSketchLabel(theParent, aWorkshop,
602 theWidgetApi, theParentId, mySketchMgr->isConstraintsShown());
603 connect(aLabelWgt, SIGNAL(planeSelected(const std::shared_ptr<GeomAPI_Pln>&)),
604 mySketchMgr, SLOT(onPlaneSelected(const std::shared_ptr<GeomAPI_Pln>&)));
605 connect(aLabelWgt, SIGNAL(showConstraintToggled(bool)),
606 mySketchMgr, SLOT(onShowConstraintsToggle(bool)));
608 } else if (theType == "sketch-2dpoint_selector") {
609 PartSet_WidgetPoint2D* aPointWgt = new PartSet_WidgetPoint2D(theParent, aWorkshop,
610 theWidgetApi, theParentId);
611 aPointWgt->setSketch(mySketchMgr->activeSketch());
612 connect(aPointWgt, SIGNAL(vertexSelected()), this, SLOT(onVertexSelected()));
614 } else if (theType == "point2ddistance") {
615 PartSet_WidgetPoint2dDistance* aDistanceWgt = new PartSet_WidgetPoint2dDistance(theParent,
616 aWorkshop, theWidgetApi, theParentId);
617 aDistanceWgt->setSketch(mySketchMgr->activeSketch());
619 } else if(theType == "point2dangle") {
620 PartSet_WidgetPoint2dAngle* anAngleWgt = new PartSet_WidgetPoint2dAngle(theParent,
621 aWorkshop, theWidgetApi, theParentId);
622 anAngleWgt->setSketch(mySketchMgr->activeSketch());
624 } else if (theType == "sketch_shape_selector") {
625 PartSet_WidgetShapeSelector* aShapeSelectorWgt =
626 new PartSet_WidgetShapeSelector(theParent, aWorkshop, theWidgetApi, theParentId);
627 aShapeSelectorWgt->setSketcher(mySketchMgr->activeSketch());
628 aWgt = aShapeSelectorWgt;
629 } else if (theType == "sketch_multi_selector") {
630 PartSet_WidgetMultiSelector* aShapeSelectorWgt =
631 new PartSet_WidgetMultiSelector(theParent, aWorkshop, theWidgetApi, theParentId);
632 aShapeSelectorWgt->setSketcher(mySketchMgr->activeSketch());
633 aWgt = aShapeSelectorWgt;
634 } else if (theType == WDG_DOUBLEVALUE_EDITOR) {
635 aWgt = new PartSet_WidgetEditor(theParent, aWorkshop, theWidgetApi, theParentId);
636 } else if (theType == "export_file_selector") {
637 aWgt = new PartSet_WidgetFileSelector(theParent, aWorkshop, theWidgetApi, theParentId);
638 } else if (theType == "sketch_launcher") {
639 aWgt = new PartSet_WidgetSketchCreator(theParent, this, theWidgetApi, theParentId);
645 bool PartSet_Module::deleteObjects()
647 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
648 XGUI_Workshop* aWorkshop = aConnector->workshop();
649 XGUI_OperationMgr* anOpMgr = aWorkshop->operationMgr();
651 //SessionPtr aMgr = ModelAPI_Session::get();
652 // 1. check whether the delete should be processed in the module
653 ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
654 bool isSketchOp = PartSet_SketcherMgr::isSketchOperation(anOperation),
655 isNestedOp = PartSet_SketcherMgr::isNestedSketchOperation(anOperation);
656 if (isSketchOp || isNestedOp) {
657 // 2. find selected presentations
658 // selected objects should be collected before the current operation abort because
659 // the abort leads to selection lost on constraint objects. It can be corrected after #386 issue
660 ModuleBase_ISelection* aSel = workshop()->selection();
661 QObjectPtrList aSelectedObj = aSel->selectedPresentations();
662 // if there are no selected objects in the viewer, that means that the selection in another
663 // place cased this method. It is necessary to return the false value to understande in above
664 // method that delete is not processed
665 if (aSelectedObj.count() == 0)
668 // avoid delete of the objects, which are not belong to the current sketch
669 // in order to do not delete results of other sketches
670 QObjectPtrList aSketchObjects;
671 QObjectPtrList::const_iterator anIt = aSelectedObj.begin(), aLast = aSelectedObj.end();
672 for ( ; anIt != aLast; anIt++) {
673 ObjectPtr anObject = *anIt;
674 if (mySketchMgr->isObjectOfSketch(anObject)) {
675 // sketch feature should be used in this list because workshop deletes features only
676 // results are skipped
677 FeaturePtr aSketchFeature = ModelAPI_Feature::feature(anObject);
678 aSketchObjects.append(aSketchFeature);
681 // if the selection contains only local selected presentations from other sketches,
682 // the Delete operation should not be done at all
683 if (aSketchObjects.size() == 0)
686 // 3. start operation
687 QString aDescription = aWorkshop->contextMenuMgr()->action("DELETE_CMD")->text();
688 ModuleBase_OperationAction* anOpAction = new ModuleBase_OperationAction(aDescription, this);
690 // the active nested sketch operation should be aborted unconditionally
691 // the Delete action should be additionally granted for the Sketch operation
692 // in order to do not abort/commit it
693 if (!anOpMgr->canStartOperation(anOpAction->id(), isSketchOp/*granted*/))
694 return true; // the objects are processed but can not be deleted
696 anOpMgr->startOperation(anOpAction);
698 // 4. delete features
699 // sketch feature should be skipped, only sub-features can be removed
700 // when sketch operation is active
701 aWorkshop->deleteFeatures(aSketchObjects);
703 anOpMgr->commitOperation();
706 bool isPartRemoved = false;
707 // Delete part with help of PartSet plugin
708 // TODO: the deleted objects has to be processed by multiselection
709 QObjectPtrList aObjects = myWorkshop->selection()->selectedObjects();
710 if (aObjects.size() == 1) {
711 ObjectPtr aObj = aObjects.first();
712 FeaturePtr aFeature = std::dynamic_pointer_cast<ModelAPI_Feature>(aObj);
713 if (aFeature.get() && (aFeature->getKind() == PartSetPlugin_Part::ID())) {
714 // Remove feature should be created in the document of the part results
715 ResultPtr aPartResult = aFeature->firstResult();
716 if (aPartResult.get()) {
717 std::shared_ptr<ModelAPI_ResultPart> aPart =
718 std::dynamic_pointer_cast<ModelAPI_ResultPart>(aPartResult);
719 DocumentPtr aPartDoc = aPart->partDoc();
720 if (aPartDoc.get()) {
721 ModuleBase_OperationAction* anOpAction = new ModuleBase_OperationAction
722 (PartSetPlugin_Remove::ID().c_str(), this);
723 if (!anOpMgr->canStartOperation(anOpAction->id()))
724 return true; // the objects are processed but can not be deleted
726 anOpMgr->startOperation(anOpAction);
728 FeaturePtr aFeature = aPartDoc->addFeature(PartSetPlugin_Remove::ID());
731 anOpMgr->commitOperation();
732 isPartRemoved = true;
737 return isPartRemoved;
742 void PartSet_Module::onFeatureTriggered()
744 QAction* aCmd = dynamic_cast<QAction*>(sender());
745 if (aCmd->isCheckable() && aCmd->isChecked()) {
746 // 1. check whether the delete should be processed in the module
747 ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
748 bool isNestedOp = PartSet_SketcherMgr::isNestedCreateOperation(anOperation);
750 // in case if in the viewer nothing is displayed, the create operation should not be
751 // comitted even if all values of the feature are initialized
752 if (!mySketchMgr->canDisplayCurrentCreatedFeature()) {
753 // the action information should be saved before the operation is aborted
754 // because this abort leads to update command status, which unchecks this action
755 anOperation->abort();
756 launchOperation(aCmd->data().toString());
760 ModuleBase_IModule::onFeatureTriggered();
763 void PartSet_Module::launchOperation(const QString& theCmdId)
765 if (PartSet_SketcherMgr::constraintsIdList().contains(theCmdId)) {
766 // Show constraints if a constraint was anOperation
767 mySketchMgr->onShowConstraintsToggle(true);
769 ModuleBase_IModule::launchOperation(theCmdId);
773 void PartSet_Module::onObjectDisplayed(ObjectPtr theObject, AISObjectPtr theAIS)
775 Handle(AIS_InteractiveObject) anAIS = theAIS->impl<Handle(AIS_InteractiveObject)>();
776 if (!anAIS.IsNull()) {
777 Handle(AIS_InteractiveContext) aCtx = anAIS->GetContext();
778 Handle(AIS_Dimension) aDim = Handle(AIS_Dimension)::DownCast(anAIS);
779 if (!aDim.IsNull()) {
780 aCtx->SetZLayer(aDim, myVisualLayerId);
782 Handle(SketcherPrs_SymbolPrs) aCons = Handle(SketcherPrs_SymbolPrs)::DownCast(anAIS);
784 aCtx->SetZLayer(aCons, myVisualLayerId);
789 void PartSet_Module::onBeforeObjectErase(ObjectPtr theObject, AISObjectPtr theAIS)
792 // it should be recomputed in order to disappear in the viewer if the corresponded object
794 //if (myCustomPrs->isActive())
795 // myCustomPrs->redisplay(theObject, false);
798 void PartSet_Module::onViewTransformed(int theTrsfType)
800 // Set length of arrows constant in pixel size
801 // if the operation is panning or rotate or panglobal then do nothing
802 if ((theTrsfType == 1) || (theTrsfType == 3) || (theTrsfType == 4))
805 ModuleBase_IViewer* aViewer = myWorkshop->viewer();
806 //Handle(V3d_View) aView = aViewer->activeView();
808 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(myWorkshop);
809 XGUI_Workshop* aWorkshop = aConnector->workshop();
810 XGUI_Displayer* aDisplayer = aWorkshop->displayer();
811 Handle(AIS_InteractiveContext) aContext = aViewer->AISContext();
813 Handle(V3d_Viewer) aV3dViewer = aContext->CurrentViewer();
814 Handle(V3d_View) aView;
816 for (aV3dViewer->InitDefinedViews();
817 aV3dViewer->MoreDefinedViews();
818 aV3dViewer->NextDefinedViews()) {
819 Handle(V3d_View) aV = aV3dViewer->DefinedView();
820 double aS = aV->Scale();
828 double aLen = aView->Convert(20);
830 double aPrevLen = SketcherPrs_Tools::getArrowSize();
831 SketcherPrs_Tools::setArrowSize(aLen);
832 const double aPrevScale = aViewer->Scale(aViewer->activeView());
833 const double aCurScale = aViewer->activeView()->Camera()->Scale();
834 aViewer->SetScale(aViewer->activeView(), aCurScale);
835 SketcherPrs_Tools::setTextHeight (aCurScale / aPrevScale * SketcherPrs_Tools::getTextHeight());
836 bool isModified = false;
837 QList<AISObjectPtr> aPrsList = aDisplayer->displayedPresentations();
838 foreach (AISObjectPtr aAIS, aPrsList) {
839 Handle(AIS_InteractiveObject) aAisObj = aAIS->impl<Handle(AIS_InteractiveObject)>();
841 Handle(AIS_Dimension) aDim = Handle(AIS_Dimension)::DownCast(aAisObj);
842 if (!aDim.IsNull()) {
843 aDim->DimensionAspect()->ArrowAspect()->SetLength(aLen);
844 aContext->Redisplay(aDim, false);
849 aDisplayer->updateViewer();
852 bool PartSet_Module::customizeObject(ObjectPtr theObject, const bool theUpdateViewer)
854 bool isRedisplayed = false;
855 if (myCustomPrs->isActive())
856 isRedisplayed = myCustomPrs->redisplay(theObject, theUpdateViewer);
858 return isRedisplayed;
861 void PartSet_Module::customizeObjectBrowser(QWidget* theObjectBrowser)
863 XGUI_ObjectsBrowser* aOB = dynamic_cast<XGUI_ObjectsBrowser*>(theObjectBrowser);
865 //QLineEdit* aLabel = aOB->activeDocLabel();
866 //QPalette aPalet = aLabel->palette();
867 //aPalet.setColor(QPalette::Text, QColor(0, 72, 140));
868 //aLabel->setPalette(aPalet);
869 aOB->treeView()->setExpandsOnDoubleClick(false);
870 connect(aOB->treeView(), SIGNAL(doubleClicked(const QModelIndex&)),
871 SLOT(onTreeViewDoubleClick(const QModelIndex&)));
872 #ifdef ModuleDataModel
873 connect(aOB, SIGNAL(headerMouseDblClicked(const QModelIndex&)),
874 SLOT(onTreeViewDoubleClick(const QModelIndex&)));
875 connect(aOB->treeView(), SIGNAL(doubleClicked(const QModelIndex&)),
876 myDataModel, SLOT(onMouseDoubleClick(const QModelIndex&)));
881 ObjectPtr PartSet_Module::findPresentedObject(const AISObjectPtr& theAIS) const
884 ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
886 /// If last line finished on vertex the lines creation sequence has to be break
887 ModuleBase_IPropertyPanel* aPanel = aOperation->propertyPanel();
888 ModuleBase_ModelWidget* anActiveWidget = aPanel->activeWidget();
889 // if there is an active widget, find the presented object in it
891 anActiveWidget = aPanel->preselectionWidget();
893 ModuleBase_WidgetValidated* aWidgetValidated = dynamic_cast<ModuleBase_WidgetValidated*>
895 if (aWidgetValidated)
896 anObject = aWidgetValidated->findPresentedObject(theAIS);
901 void PartSet_Module::addObjectBrowserMenu(QMenu* theMenu) const
903 QObjectPtrList aObjects = myWorkshop->selection()->selectedObjects();
904 int aSelected = aObjects.size();
905 SessionPtr aMgr = ModelAPI_Session::get();
906 QAction* aActivatePartAction = myMenuMgr->action("ACTIVATE_PART_CMD");
907 QAction* aActivatePartSetAction = myMenuMgr->action("ACTIVATE_PARTSET_CMD");
908 if (aSelected == 1) {
909 bool hasResult = false;
910 bool hasFeature = false;
911 bool hasParameter = false;
912 bool hasSubFeature = false;
913 ModuleBase_Tools::checkObjects(aObjects, hasResult, hasFeature, hasParameter, hasSubFeature);
915 ObjectPtr aObject = aObjects.first();
917 ResultPartPtr aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aObject);
918 FeaturePtr aPartFeature = std::dynamic_pointer_cast<ModelAPI_Feature>(aObject);
919 bool isPart = aPart.get() ||
920 (aPartFeature.get() && (aPartFeature->getKind() == PartSetPlugin_Part::ID()));
922 DocumentPtr aPartDoc;
924 aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aPartFeature->firstResult());
926 if (aPart.get()) // this may be null is Part feature is disabled
927 aPartDoc = aPart->partDoc();
929 theMenu->addAction(aActivatePartAction);
930 aActivatePartAction->setEnabled((aMgr->activeDocument() != aPartDoc));
932 } else if (aObject->document() == aMgr->activeDocument()) {
933 if (hasParameter || hasFeature)
934 theMenu->addAction(myMenuMgr->action("EDIT_CMD"));
937 ResultBodyPtr aResult = std::dynamic_pointer_cast<ModelAPI_ResultBody>(aObject);
939 theMenu->addAction(myMenuMgr->action("SELECT_PARENT_CMD"));
940 } else { // If feature is 0 the it means that selected root object (document)
941 theMenu->addAction(aActivatePartSetAction);
942 aActivatePartSetAction->setEnabled((aMgr->activeDocument() != aMgr->moduleDocument()));
944 } else if (aSelected == 0) {
945 // if there is no selection then it means that upper label is selected
946 QModelIndexList aIndexes = myWorkshop->selection()->selectedIndexes();
947 if (aIndexes.size() == 0) // it means that selection happens in top label outside of tree view
948 theMenu->addAction(aActivatePartSetAction);
949 aActivatePartSetAction->setEnabled((aMgr->activeDocument() != aMgr->moduleDocument()));
951 bool aNotDeactivate = (myWorkshop->currentOperation() == 0);
952 if (!aNotDeactivate) {
953 aActivatePartAction->setEnabled(false);
954 aActivatePartSetAction->setEnabled(false);
958 void PartSet_Module::processEvent(const std::shared_ptr<Events_Message>& theMessage)
960 if (theMessage->eventID() == Events_Loop::loop()->eventByName(EVENT_DOCUMENT_CHANGED)) {
961 // Do not change activation of parts if an operation active
962 static QStringList aAllowActivationList;
963 if (aAllowActivationList.isEmpty())
964 aAllowActivationList <<
965 QString(PartSetPlugin_Part::ID().c_str()) <<
966 QString(PartSetPlugin_Duplicate::ID().c_str()) <<
967 QString(PartSetPlugin_Remove::ID().c_str());
968 if (myWorkshop->currentOperation() &&
969 (!aAllowActivationList.contains(myWorkshop->currentOperation()->id())))
971 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(myWorkshop);
972 XGUI_Workshop* aWorkshop = aConnector->workshop();
973 XGUI_DataTree* aTreeView = aWorkshop->objectBrowser()->treeView();
974 QLineEdit* aLabel = aWorkshop->objectBrowser()->activeDocLabel();
975 QPalette aPalet = aLabel->palette();
977 SessionPtr aMgr = ModelAPI_Session::get();
978 DocumentPtr aActiveDoc = aMgr->activeDocument();
979 #ifdef ModuleDataModel
980 QModelIndex aOldIndex = myDataModel->activePartTree();
981 DocumentPtr aDoc = aMgr->moduleDocument();
982 if (aActiveDoc == aDoc) {
983 if (aOldIndex.isValid())
984 aTreeView->setExpanded(aOldIndex, false);
985 myDataModel->deactivatePart();
986 aPalet.setColor(QPalette::Text, QColor(0, 72, 140));
988 std::string aGrpName = ModelAPI_ResultPart::group();
989 for (int i = 0; i < aDoc->size(aGrpName); i++) {
990 ResultPartPtr aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aDoc->object(aGrpName, i));
991 if (aPart->partDoc() == aActiveDoc) {
992 QModelIndex aIndex = myDataModel->partIndex(aPart);
993 if (myDataModel->activatePart(aIndex)) {
994 if (aOldIndex.isValid())
995 aTreeView->setExpanded(aOldIndex, false);
996 aTreeView->setExpanded(myDataModel->activePartTree(), true);
997 aPalet.setColor(QPalette::Text, Qt::black);
1004 // Problem with MPV: At first time on creation it doesn't work because Part feature
1005 // creation event will be sent after
1006 if (aActivePartIndex.isValid())
1007 aTreeView->setExpanded(aActivePartIndex, false);
1008 XGUI_DataModel* aDataModel = aWorkshop->objectBrowser()->dataModel();
1009 aActivePartIndex = aDataModel->documentRootIndex(aActiveDoc);
1010 if (aActivePartIndex.isValid())
1011 aTreeView->setExpanded(aActivePartIndex, true);
1013 aLabel->setPalette(aPalet);
1014 aWorkshop->updateCommandStatus();
1016 // Update displayed objects in order to update active color
1017 XGUI_Displayer* aDisplayer = aWorkshop->displayer();
1018 QObjectPtrList aObjects = aDisplayer->displayedObjects();
1019 foreach(ObjectPtr aObj, aObjects)
1020 aDisplayer->redisplay(aObj, false);
1021 aDisplayer->updateViewer();
1022 } else if (theMessage->eventID() == Events_Loop::eventByName(EVENT_SOLVER_FAILED) ||
1023 theMessage->eventID() == Events_Loop::eventByName(EVENT_SOLVER_REPAIRED)) {
1024 CompositeFeaturePtr aSketch = sketchMgr()->activeSketch();
1025 if (aSketch.get()) {
1026 if (theMessage->eventID() == Events_Loop::eventByName(EVENT_SOLVER_REPAIRED)) {
1027 // it should be moved out, validating is called to update error string of the sketch feature
1028 if (sketchMgr()->activeSketch().get()) {
1029 SessionPtr aMgr = ModelAPI_Session::get();
1030 ModelAPI_ValidatorsFactory* aFactory = aMgr->validators();
1031 bool aValid = aFactory->validate(sketchMgr()->activeSketch());
1035 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
1036 XGUI_Workshop* aWorkshop = aConnector->workshop();
1037 aWorkshop->errorMgr()->updateActions(aSketch);
1042 void PartSet_Module::onTreeViewDoubleClick(const QModelIndex& theIndex)
1044 if (myWorkshop->currentOperation()) // Do not change activation of parts if an operation active
1046 SessionPtr aMgr = ModelAPI_Session::get();
1047 if (!theIndex.isValid()) {
1048 aMgr->setActiveDocument(aMgr->moduleDocument());
1051 if (theIndex.column() != 0) // Use only first column
1053 #ifdef ModuleDataModel
1054 ObjectPtr aObj = myDataModel->object(theIndex);
1056 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(myWorkshop);
1057 XGUI_Workshop* aWorkshop = aConnector->workshop();
1058 XGUI_DataModel* aDataModel = aWorkshop->objectBrowser()->dataModel();
1059 // De not use non editable Indexes
1060 if ((aDataModel->flags(theIndex) & Qt::ItemIsSelectable) == 0)
1062 ObjectPtr aObj = aDataModel->object(theIndex);
1065 ResultPartPtr aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aObj);
1066 if (!aPart.get()) { // Probably this is Feature
1067 FeaturePtr aPartFeature = std::dynamic_pointer_cast<ModelAPI_Feature>(aObj);
1068 if (aPartFeature.get() && (aPartFeature->getKind() == PartSetPlugin_Part::ID())) {
1069 aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aPartFeature->firstResult());
1072 if (aPart.get()) { // if this is a part
1073 if (aPart->partDoc() == aMgr->activeDocument()) {
1074 myMenuMgr->activatePartSet();
1082 void PartSet_Module::onViewCreated(ModuleBase_IViewWindow*)
1084 // z layer is created for all started operations in order to visualize operation AIS presentation
1086 Handle(V3d_Viewer) aViewer = myWorkshop->viewer()->AISContext()->CurrentViewer();
1087 if (myVisualLayerId == 0) {
1088 if (myVisualLayerId == 0)
1089 aViewer->AddZLayer(myVisualLayerId);
1091 TColStd_SequenceOfInteger aZList;
1092 aViewer->GetAllZLayers(aZList);
1093 bool aFound = false;
1094 for (int i = 1; i <= aZList.Length(); i++) {
1095 if (aZList(i) == myVisualLayerId) {
1101 aViewer->AddZLayer(myVisualLayerId);