1 // Copyright (C) 2014-20xx CEA/DEN, EDF R&D
3 #include "PartSet_Module.h"
4 #include "PartSet_WidgetSketchLabel.h"
5 #include "PartSet_Validators.h"
6 #include "PartSet_Tools.h"
7 #include "PartSet_WidgetPoint2d.h"
8 #include "PartSet_WidgetPoint2dDistance.h"
9 #include "PartSet_WidgetShapeSelector.h"
10 #include "PartSet_WidgetPoint2dAngle.h"
11 #include "PartSet_WidgetMultiSelector.h"
12 #include "PartSet_WidgetEditor.h"
13 #include "PartSet_WidgetFileSelector.h"
14 #include "PartSet_WidgetSketchCreator.h"
15 #include "PartSet_SketcherMgr.h"
16 #include "PartSet_MenuMgr.h"
17 #include <PartSet_CustomPrs.h>
19 #include "PartSet_Filters.h"
20 #include "PartSet_FilterInfinite.h"
22 #include <PartSetPlugin_Remove.h>
23 #include <PartSetPlugin_Part.h>
25 #include <ModuleBase_Operation.h>
26 #include <ModuleBase_IViewer.h>
27 #include <ModuleBase_IViewWindow.h>
28 #include <ModuleBase_IPropertyPanel.h>
29 #include <ModuleBase_WidgetEditor.h>
30 #include <ModuleBase_FilterFactory.h>
31 #include <ModuleBase_Tools.h>
32 #include <GeomValidators_ShapeType.h>
34 #include <GeomValidators_Face.h>
35 #include <GeomValidators_ConstructionComposite.h>
36 #include <GeomValidators_ZeroOffset.h>
37 #include <GeomValidators_BooleanArguments.h>
40 #include <ModelAPI_Object.h>
41 #include <ModelAPI_Events.h>
42 #include <ModelAPI_Validator.h>
43 #include <ModelAPI_Data.h>
44 #include <ModelAPI_Session.h>
45 #include <ModelAPI_ShapeValidator.h>
47 #include <GeomDataAPI_Point2D.h>
48 #include <GeomDataAPI_Point.h>
49 #include <GeomDataAPI_Dir.h>
51 #include <XGUI_Displayer.h>
52 #include <XGUI_Workshop.h>
53 #include <XGUI_OperationMgr.h>
54 #include <XGUI_PropertyPanel.h>
55 #include <XGUI_ModuleConnector.h>
56 #include <XGUI_ContextMenuMgr.h>
57 #include <XGUI_Tools.h>
58 #include <XGUI_ObjectsBrowser.h>
59 #include <XGUI_SelectionMgr.h>
61 #include <SketchPlugin_Feature.h>
62 #include <SketchPlugin_Sketch.h>
63 #include <SketchPlugin_Line.h>
64 #include <SketchPlugin_Arc.h>
65 #include <SketchPlugin_Circle.h>
66 #include <SketchPlugin_Point.h>
67 #include <SketchPlugin_ConstraintLength.h>
68 #include <SketchPlugin_ConstraintDistance.h>
69 #include <SketchPlugin_ConstraintParallel.h>
70 #include <SketchPlugin_ConstraintPerpendicular.h>
71 #include <SketchPlugin_ConstraintRadius.h>
73 #include <SketcherPrs_SymbolPrs.h>
74 #include <SketcherPrs_Tools.h>
76 #include <Events_Loop.h>
77 #include <Config_PropManager.h>
78 #include <Config_Keywords.h>
80 #include <StdSelect_TypeOfFace.hxx>
81 #include <TopoDS_Vertex.hxx>
83 #include <TopoDS_Shape.hxx>
84 #include <BRep_Tool.hxx>
85 #include <AIS_Dimension.hxx>
88 #include <QMouseEvent>
91 #include <QApplication>
92 #include <QMessageBox>
93 #include <QMainWindow>
96 #include <GeomAlgoAPI_FaceBuilder.h>
97 #include <GeomDataAPI_Dir.h>
99 #include <SelectMgr_ListIteratorOfListOfFilter.hxx>
107 /*!Create and return new instance of XGUI_Module*/
108 extern "C" PARTSET_EXPORT ModuleBase_IModule* createModule(ModuleBase_IWorkshop* theWshop)
110 return new PartSet_Module(theWshop);
113 PartSet_Module::PartSet_Module(ModuleBase_IWorkshop* theWshop)
114 : ModuleBase_IModule(theWshop),
115 myRestartingMode(RM_None), myVisualLayerId(0)
117 mySketchMgr = new PartSet_SketcherMgr(this);
118 myDataModel = new PartSet_DocumentDataModel(this);
120 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(theWshop);
121 XGUI_Workshop* aWorkshop = aConnector->workshop();
123 XGUI_OperationMgr* anOpMgr = aWorkshop->operationMgr();
124 connect(anOpMgr, SIGNAL(keyEnterReleased()), this, SLOT(onEnterReleased()));
125 connect(anOpMgr, SIGNAL(operationActivatedByPreselection()),
126 this, SLOT(onOperationActivatedByPreselection()));
128 ModuleBase_IViewer* aViewer = theWshop->viewer();
129 connect(aViewer, SIGNAL(keyRelease(ModuleBase_IViewWindow*, QKeyEvent*)),
130 this, SLOT(onKeyRelease(ModuleBase_IViewWindow*, QKeyEvent*)));
131 connect(aViewer, SIGNAL(viewTransformed(int)),
132 SLOT(onViewTransformed(int)));
134 myMenuMgr = new PartSet_MenuMgr(this);
135 myCustomPrs = std::shared_ptr<GeomAPI_ICustomPrs>(new PartSet_CustomPrs(theWshop));
137 Events_Loop* aLoop = Events_Loop::loop();
138 aLoop->registerListener(this, Events_Loop::eventByName(EVENT_DOCUMENT_CHANGED));
140 mySelectionFilters.Append(new PartSet_GlobalFilter(myWorkshop));
141 mySelectionFilters.Append(new PartSet_FilterInfinite(myWorkshop));
144 PartSet_Module::~PartSet_Module()
146 SelectMgr_ListIteratorOfListOfFilter aIt(mySelectionFilters);
147 for (; aIt.More(); aIt.Next()) {
148 Handle(SelectMgr_Filter) aFilter = aIt.Value();
149 if (!aFilter.IsNull())
154 void PartSet_Module::activateSelectionFilters()
156 SelectMgr_ListIteratorOfListOfFilter aIt(mySelectionFilters);
157 for (; aIt.More(); aIt.Next()) {
158 Handle(SelectMgr_Filter) aFilter = aIt.Value();
159 if (!aFilter.IsNull())
160 myWorkshop->viewer()->addSelectionFilter(aFilter);
164 void PartSet_Module::deactivateSelectionFilters()
166 SelectMgr_ListIteratorOfListOfFilter aIt(mySelectionFilters);
167 for (; aIt.More(); aIt.Next()) {
168 Handle(SelectMgr_Filter) aFilter = aIt.Value();
169 if (!aFilter.IsNull())
170 myWorkshop->viewer()->removeSelectionFilter(aFilter);
174 void PartSet_Module::registerValidators()
176 //Registering of validators
177 SessionPtr aMgr = ModelAPI_Session::get();
178 ModelAPI_ValidatorsFactory* aFactory = aMgr->validators();
179 aFactory->registerValidator("PartSet_DistanceSelection", new PartSet_DistanceSelection);
180 aFactory->registerValidator("PartSet_LengthSelection", new PartSet_LengthSelection);
181 aFactory->registerValidator("PartSet_PerpendicularSelection", new PartSet_PerpendicularSelection);
182 aFactory->registerValidator("PartSet_ParallelSelection", new PartSet_ParallelSelection);
183 aFactory->registerValidator("PartSet_RadiusSelection", new PartSet_RadiusSelection);
184 aFactory->registerValidator("PartSet_RigidSelection", new PartSet_RigidSelection);
185 aFactory->registerValidator("PartSet_CoincidentSelection", new PartSet_CoincidentSelection);
186 aFactory->registerValidator("PartSet_HVDirSelection", new PartSet_HVDirSelection);
187 aFactory->registerValidator("PartSet_TangentSelection", new PartSet_TangentSelection);
188 aFactory->registerValidator("PartSet_FilletSelection", new PartSet_FilletSelection);
190 aFactory->registerValidator("PartSet_DifferentObjects", new PartSet_DifferentObjectsValidator);
191 aFactory->registerValidator("PartSet_DifferentShapes", new ModelAPI_ShapeValidator);
193 aFactory->registerValidator("GeomValidators_ShapeType", new GeomValidators_ShapeType);
194 aFactory->registerValidator("GeomValidators_Face", new GeomValidators_Face);
196 aFactory->registerValidator("GeomValidators_ConstructionComposite",
197 new GeomValidators_ConstructionComposite);
199 aFactory->registerValidator("GeomValidators_ZeroOffset",
200 new GeomValidators_ZeroOffset);
202 aFactory->registerValidator("GeomValidators_BooleanArguments",
203 new GeomValidators_BooleanArguments);
205 aFactory->registerValidator("PartSet_SketchEntityValidator",
206 new PartSet_SketchEntityValidator);
208 aFactory->registerValidator("PartSet_SameTypeAttr",
209 new PartSet_SameTypeAttrValidator);
212 void PartSet_Module::registerFilters()
214 //Registering of selection filters
215 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
216 ModuleBase_FilterFactory* aFactory = aConnector->selectionFilters();
219 void PartSet_Module::registerProperties()
221 Config_PropManager::registerProp("Sketch planes", "planes_size", "Size", Config_Prop::Double,
223 Config_PropManager::registerProp("Sketch planes", "planes_thickness", "Thickness",
224 Config_Prop::Integer, SKETCH_WIDTH);
227 void PartSet_Module::onOperationCommitted(ModuleBase_Operation* theOperation)
229 if (PartSet_SketcherMgr::isNestedSketchOperation(theOperation)) {
230 mySketchMgr->commitNestedSketch(theOperation);
233 if (theOperation->isEditOperation())
235 // the selection is cleared after commit the create operation
236 // in order to do not use the same selected objects in the restarted operation
237 // for common behaviour, the selection is cleared even if the operation is not restarted
238 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
239 XGUI_Workshop* aWorkshop = aConnector->workshop();
240 aWorkshop->selector()->clearSelection();
242 /// Restart sketcher operations automatically
243 FeaturePtr aFeature = theOperation->feature();
244 std::shared_ptr<SketchPlugin_Feature> aSPFeature =
245 std::dynamic_pointer_cast<SketchPlugin_Feature>(aFeature);
246 if (aSPFeature && (myRestartingMode == RM_LastFeatureUsed ||
247 myRestartingMode == RM_EmptyFeatureUsed)) {
248 myLastOperationId = theOperation->id();
249 myLastFeature = myRestartingMode == RM_LastFeatureUsed ? theOperation->feature() : FeaturePtr();
251 launchOperation(myLastOperationId);
253 breakOperationSequence();
256 void PartSet_Module::breakOperationSequence()
258 myLastOperationId = "";
259 myLastFeature = FeaturePtr();
260 myRestartingMode = RM_None;
263 void PartSet_Module::onOperationAborted(ModuleBase_Operation* theOperation)
265 breakOperationSequence();
268 void PartSet_Module::onOperationStarted(ModuleBase_Operation* theOperation)
270 if (PartSet_SketcherMgr::isSketchOperation(theOperation)) {
271 Handle(V3d_Viewer) aViewer = myWorkshop->viewer()->AISContext()->CurrentViewer();
272 aViewer->AddZLayer(myVisualLayerId);
273 mySketchMgr->startSketch(theOperation);
275 else if (PartSet_SketcherMgr::isNestedSketchOperation(theOperation)) {
276 mySketchMgr->startNestedSketch(theOperation);
280 void PartSet_Module::onOperationStopped(ModuleBase_Operation* theOperation)
282 if (PartSet_SketcherMgr::isSketchOperation(theOperation)) {
283 mySketchMgr->stopSketch(theOperation);
284 Handle(V3d_Viewer) aViewer = myWorkshop->viewer()->AISContext()->CurrentViewer();
285 aViewer->RemoveZLayer(myVisualLayerId);
288 else if (PartSet_SketcherMgr::isNestedSketchOperation(theOperation)) {
289 mySketchMgr->stopNestedSketch(theOperation);
293 ModuleBase_Operation* PartSet_Module::currentOperation() const
295 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
296 XGUI_OperationMgr* anOpMgr = aConnector->workshop()->operationMgr();
297 return anOpMgr->currentOperation();
300 bool PartSet_Module::canUndo() const
302 bool aCanUndo = false;
303 SessionPtr aMgr = ModelAPI_Session::get();
304 if (aMgr->hasModuleDocument() && aMgr->canUndo()) {
305 aCanUndo = !aMgr->isOperation();
306 if (!aCanUndo) // check the enable state additionally by sketch manager
307 aCanUndo = aMgr->canUndo();
312 bool PartSet_Module::canRedo() const
314 bool aCanRedo = false;
315 SessionPtr aMgr = ModelAPI_Session::get();
316 if (aMgr->hasModuleDocument() && aMgr->canRedo()) {
317 aCanRedo = !aMgr->isOperation();
318 if (!aCanRedo) // check the enable state additionally by sketch manager
319 aCanRedo = aMgr->canRedo();
324 bool PartSet_Module::canCommitOperation() const
326 return mySketchMgr->canCommitOperation();
329 bool PartSet_Module::canDisplayObject(const ObjectPtr& theObject) const
331 // the sketch manager put the restriction to the objects display
332 return mySketchMgr->canDisplayObject(theObject);
335 bool PartSet_Module::canActivateSelection(const ObjectPtr& theObject) const
337 bool aCanActivate = ModuleBase_IModule::canActivateSelection(theObject);
339 ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
340 bool isSketchOp = PartSet_SketcherMgr::isSketchOperation(anOperation),
341 isNestedOp = PartSet_SketcherMgr::isNestedSketchOperation(anOperation);
342 if (isSketchOp || isNestedOp) {
343 // in active sketch operation it is possible to activate operation object in selection
344 // in the edit operation, e.g. points of the line can be moved when the line is edited
345 aCanActivate = aCanActivate || anOperation->isEditOperation();
350 bool PartSet_Module::addViewerMenu(QMenu* theMenu, const QMap<QString, QAction*>& theStdActions) const
352 return myMenuMgr->addViewerMenu(theMenu, theStdActions);
355 void PartSet_Module::activeSelectionModes(QIntList& theModes)
358 if (mySketchMgr->activeSketch().get())
359 PartSet_SketcherMgr::sketchSelectionModes(theModes);
362 bool PartSet_Module::isMouseOverWindow()
364 return mySketchMgr->isMouseOverWindow();
367 void PartSet_Module::propertyPanelDefined(ModuleBase_Operation* theOperation)
369 ModuleBase_IPropertyPanel* aPanel = theOperation->propertyPanel();
370 if (PartSet_SketcherMgr::isSketchOperation(theOperation) && (theOperation->isEditOperation())) {
371 // we have to manually activate the sketch label in edit mode
372 aPanel->activateWidget(aPanel->modelWidgets().first());
376 // Restart last operation type
377 if ((theOperation->id() == myLastOperationId) && myLastFeature) {
378 ModuleBase_ModelWidget* aWgt = aPanel->activeWidget();
379 if (theOperation->id().toStdString() == SketchPlugin_Line::ID()) {
380 // Initialise new line with first point equal to end of previous
381 PartSet_WidgetPoint2D* aPnt2dWgt = dynamic_cast<PartSet_WidgetPoint2D*>(aWgt);
383 std::shared_ptr<ModelAPI_Data> aData = myLastFeature->data();
384 std::shared_ptr<GeomDataAPI_Point2D> aPoint =
385 std::dynamic_pointer_cast<GeomDataAPI_Point2D>(aData->attribute(SketchPlugin_Line::END_ID()));
387 aPnt2dWgt->setPoint(aPoint->x(), aPoint->y());
388 PartSet_Tools::setConstraints(mySketchMgr->activeSketch(), theOperation->feature(),
389 aWgt->attributeID(), aPoint->x(), aPoint->y());
390 aPanel->activateNextWidget(aPnt2dWgt);
398 void PartSet_Module::onSelectionChanged()
400 ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
404 bool isSketcherOp = false;
405 // An edit operation is enable only if the current opeation is the sketch operation
406 if (mySketchMgr->activeSketch()) {
407 if (PartSet_Tools::sketchPlane(mySketchMgr->activeSketch()))
408 isSketcherOp = PartSet_SketcherMgr::isSketchOperation(aOperation);
411 // Editing of constraints can be done on selection
412 ModuleBase_ISelection* aSelect = myWorkshop->selection();
413 QList<ModuleBase_ViewerPrs> aSelected = aSelect->getSelected();
414 if (aSelected.size() == 1) {
415 ModuleBase_ViewerPrs aPrs = aSelected.first();
416 ObjectPtr aObject = aPrs.object();
417 FeaturePtr aFeature = ModelAPI_Feature::feature(aObject);
419 std::string aId = aFeature->getKind();
420 if ((aId == SketchPlugin_ConstraintRadius::ID()) ||
421 (aId == SketchPlugin_ConstraintLength::ID()) ||
422 (aId == SketchPlugin_ConstraintDistance::ID())) {
423 editFeature(aFeature);
430 void PartSet_Module::onKeyRelease(ModuleBase_IViewWindow* theWnd, QKeyEvent* theEvent)
432 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
433 XGUI_OperationMgr* anOpMgr = aConnector->workshop()->operationMgr();
434 anOpMgr->onKeyReleased(theEvent);
437 void PartSet_Module::onEnterReleased()
439 myRestartingMode = RM_EmptyFeatureUsed;
442 void PartSet_Module::onOperationActivatedByPreselection()
444 ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
445 if(anOperation && PartSet_SketcherMgr::isNestedSketchOperation(anOperation)) {
446 // Set final definitions if they are necessary
447 //propertyPanelDefined(aOperation);
449 /// Commit sketcher operations automatically
450 anOperation->commit();
454 void PartSet_Module::onNoMoreWidgets()
456 ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
458 if (PartSet_SketcherMgr::isNestedSketchOperation(anOperation)) {
459 if (myRestartingMode != RM_Forbided)
460 myRestartingMode = RM_LastFeatureUsed;
461 anOperation->commit();
466 void PartSet_Module::onVertexSelected()
468 ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
469 if (aOperation->id().toStdString() == SketchPlugin_Line::ID()) {
470 /// If last line finished on vertex the lines creation sequence has to be break
471 ModuleBase_IPropertyPanel* aPanel = aOperation->propertyPanel();
472 ModuleBase_ModelWidget* anActiveWidget = aPanel->activeWidget();
473 const QList<ModuleBase_ModelWidget*>& aWidgets = aPanel->modelWidgets();
474 QList<ModuleBase_ModelWidget*>::const_iterator anIt = aWidgets.begin(), aLast = aWidgets.end();
475 bool aFoundWidget = false;
476 bool aFoundObligatory = false;
477 for (; anIt != aLast && !aFoundObligatory; anIt++) {
479 aFoundWidget = *anIt == anActiveWidget;
481 aFoundObligatory = (*anIt)->isObligatory();
483 if (!aFoundObligatory)
484 myRestartingMode = RM_Forbided;
488 ModuleBase_ModelWidget* PartSet_Module::createWidgetByType(const std::string& theType, QWidget* theParent,
489 Config_WidgetAPI* theWidgetApi, std::string theParentId)
491 ModuleBase_IWorkshop* aWorkshop = workshop();
492 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(aWorkshop);
493 XGUI_Workshop* aXUIWorkshop = aConnector->workshop();
494 ModuleBase_ModelWidget* aWgt = NULL;
495 if (theType == "sketch-start-label") {
496 PartSet_WidgetSketchLabel* aLabelWgt = new PartSet_WidgetSketchLabel(theParent,
497 theWidgetApi, theParentId, mySketchMgr->isConstraintsShown());
498 aLabelWgt->setWorkshop(aXUIWorkshop);
499 connect(aLabelWgt, SIGNAL(planeSelected(const std::shared_ptr<GeomAPI_Pln>&)),
500 mySketchMgr, SLOT(onPlaneSelected(const std::shared_ptr<GeomAPI_Pln>&)));
501 connect(aLabelWgt, SIGNAL(showConstraintToggled(bool)),
502 mySketchMgr, SLOT(onShowConstraintsToggle(bool)));
504 } else if (theType == "sketch-2dpoint_selector") {
505 PartSet_WidgetPoint2D* aPointWgt = new PartSet_WidgetPoint2D(theParent, aWorkshop,
506 theWidgetApi, theParentId);
507 aPointWgt->setSketch(mySketchMgr->activeSketch());
508 connect(aPointWgt, SIGNAL(vertexSelected()), this, SLOT(onVertexSelected()));
510 } else if (theType == "point2ddistance") {
511 PartSet_WidgetPoint2dDistance* aDistanceWgt = new PartSet_WidgetPoint2dDistance(theParent,
512 aWorkshop, theWidgetApi, theParentId);
513 aDistanceWgt->setSketch(mySketchMgr->activeSketch());
515 } else if(theType == "point2dangle") {
516 PartSet_WidgetPoint2dAngle* anAngleWgt = new PartSet_WidgetPoint2dAngle(theParent,
517 aWorkshop, theWidgetApi, theParentId);
518 anAngleWgt->setSketch(mySketchMgr->activeSketch());
520 } else if (theType == "sketch_shape_selector") {
521 PartSet_WidgetShapeSelector* aShapeSelectorWgt =
522 new PartSet_WidgetShapeSelector(theParent, aWorkshop, theWidgetApi, theParentId);
523 aShapeSelectorWgt->setSketcher(mySketchMgr->activeSketch());
524 aWgt = aShapeSelectorWgt;
525 } else if (theType == "sketch_multi_selector") {
526 PartSet_WidgetMultiSelector* aShapeSelectorWgt =
527 new PartSet_WidgetMultiSelector(theParent, aWorkshop, theWidgetApi, theParentId);
528 aShapeSelectorWgt->setSketcher(mySketchMgr->activeSketch());
529 aWgt = aShapeSelectorWgt;
530 } else if (theType == WDG_DOUBLEVALUE_EDITOR) {
531 aWgt = new PartSet_WidgetEditor(theParent, aWorkshop, theWidgetApi, theParentId);
532 } else if (theType == "export_file_selector") {
533 aWgt = new PartSet_WidgetFileSelector(theParent, aWorkshop, theWidgetApi, theParentId);
534 } else if (theType == "sketch_launcher") {
535 aWgt = new PartSet_WidgetSketchCreator(theParent, this, theWidgetApi, theParentId);
541 bool PartSet_Module::deleteObjects()
543 SessionPtr aMgr = ModelAPI_Session::get();
544 // 1. check whether the delete should be processed in the module
545 ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
546 bool isSketchOp = PartSet_SketcherMgr::isSketchOperation(anOperation),
547 isNestedOp = PartSet_SketcherMgr::isNestedSketchOperation(anOperation);
548 if (isSketchOp || isNestedOp) {
549 // 2. find selected presentations
550 // selected objects should be collected before the current operation abort because
551 // the abort leads to selection lost on constraint objects. It can be corrected after #386 issue
552 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
553 XGUI_Workshop* aWorkshop = aConnector->workshop();
554 ModuleBase_ISelection* aSel = workshop()->selection();
555 QObjectPtrList aSelectedObj = aSel->selectedPresentations();
556 // if there are no selected objects in the viewer, that means that the selection in another
557 // place cased this method. It is necessary to return the false value to understande in above
558 // method that delete is not processed
559 if (aSelectedObj.count() == 0)
562 // avoid delete of the objects, which are not belong to the current sketch
563 // in order to do not delete results of other sketches
564 QObjectPtrList aSketchObjects;
565 QObjectPtrList::const_iterator anIt = aSelectedObj.begin(), aLast = aSelectedObj.end();
566 for ( ; anIt != aLast; anIt++) {
567 ObjectPtr anObject = *anIt;
568 if (mySketchMgr->isObjectOfSketch(anObject)) {
569 // sketch feature should be used in this list because workshop deletes features only
570 // results are skipped
571 FeaturePtr aSketchFeature = ModelAPI_Feature::feature(anObject);
572 aSketchObjects.append(aSketchFeature);
575 // if the selection contains only local selected presentations from other sketches,
576 // the Delete operation should not be done at all
577 if (aSketchObjects.size() == 0)
580 // the active nested sketch operation should be aborted unconditionally
582 anOperation->abort();
584 // 3. start operation
585 QString aDescription = aWorkshop->contextMenuMgr()->action("DELETE_CMD")->text();
586 aMgr->startOperation(aDescription.toStdString());
588 // 4. delete features
589 // sketch feature should be skipped, only sub-features can be removed
590 // when sketch operation is active
591 std::set<FeaturePtr> anIgnoredFeatures;
592 anIgnoredFeatures.insert(mySketchMgr->activeSketch());
593 aWorkshop->deleteFeatures(aSketchObjects, anIgnoredFeatures);
596 aWorkshop->displayer()->updateViewer();
597 aMgr->finishOperation();
599 bool isPartRemoved = false;
600 // Delete part with help of PartSet plugin
601 // TODO: the deleted objects has to be processed by multiselection
602 QObjectPtrList aObjects = myWorkshop->selection()->selectedObjects();
603 if (aObjects.size() == 1) {
604 ObjectPtr aObj = aObjects.first();
605 FeaturePtr aFeature = std::dynamic_pointer_cast<ModelAPI_Feature>(aObj);
606 if (aFeature.get() && (aFeature->getKind() == PartSetPlugin_Part::ID())) {
607 // Remove feature should be created in the document of the part results
608 ResultPtr aPartResult = aFeature->firstResult();
609 if (aPartResult.get()) {
610 std::shared_ptr<ModelAPI_ResultPart> aPart =
611 std::dynamic_pointer_cast<ModelAPI_ResultPart>(aPartResult);
612 DocumentPtr aPartDoc = aPart->partDoc();
613 if (aPartDoc.get()) {
614 aMgr->startOperation(PartSetPlugin_Remove::ID());
615 FeaturePtr aFeature = aPartDoc->addFeature(PartSetPlugin_Remove::ID());
617 aMgr->finishOperation();
618 isPartRemoved = true;
623 return isPartRemoved;
628 void PartSet_Module::onFeatureTriggered()
630 SessionPtr aMgr = ModelAPI_Session::get();
631 // 1. check whether the delete should be processed in the module
632 ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
633 bool isNestedOp = PartSet_SketcherMgr::isNestedCreateOperation(anOperation);
635 // in case if in the viewer nothing is displayed, the create operation should not be
636 // comitted even if all values of the feature are initialized
637 if (!mySketchMgr->canDisplayCurrentCreatedFeature()) {
638 QAction* aCmd = dynamic_cast<QAction*>(sender());
639 //Do nothing on uncheck
640 if (aCmd->isCheckable() && !aCmd->isChecked())
643 // the action information should be saved before the operation is aborted
644 // because this abort leads to update command status, which unchecks this action
645 anOperation->abort();
647 launchOperation(aCmd->data().toString());
650 ModuleBase_IModule::onFeatureTriggered();
653 void PartSet_Module::onObjectDisplayed(ObjectPtr theObject, AISObjectPtr theAIS)
655 Handle(AIS_InteractiveObject) anAIS = theAIS->impl<Handle(AIS_InteractiveObject)>();
656 if (!anAIS.IsNull()) {
657 Handle(AIS_InteractiveContext) aCtx = anAIS->GetContext();
658 Handle(AIS_Dimension) aDim = Handle(AIS_Dimension)::DownCast(anAIS);
659 if (!aDim.IsNull()) {
660 aCtx->SetZLayer(aDim, myVisualLayerId);
662 Handle(SketcherPrs_SymbolPrs) aCons = Handle(SketcherPrs_SymbolPrs)::DownCast(anAIS);
664 aCtx->SetZLayer(aCons, myVisualLayerId);
669 void PartSet_Module::onViewTransformed(int theTrsfType)
671 // Set length of arrows constant in pixel size
672 // if the operation is panning or rotate or panglobal then do nothing
673 if ((theTrsfType == 1) || (theTrsfType == 3) || (theTrsfType == 4))
676 ModuleBase_IViewer* aViewer = myWorkshop->viewer();
677 //Handle(V3d_View) aView = aViewer->activeView();
679 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(myWorkshop);
680 XGUI_Workshop* aWorkshop = aConnector->workshop();
681 XGUI_Displayer* aDisplayer = aWorkshop->displayer();
682 Handle(AIS_InteractiveContext) aContext = aViewer->AISContext();
684 Handle(V3d_Viewer) aV3dViewer = aContext->CurrentViewer();
685 Handle(V3d_View) aView;
687 for (aV3dViewer->InitDefinedViews();
688 aV3dViewer->MoreDefinedViews();
689 aV3dViewer->NextDefinedViews()) {
690 Handle(V3d_View) aV = aV3dViewer->DefinedView();
691 double aS = aV->Scale();
699 double aLen = aView->Convert(20);
701 double aPrevLen = SketcherPrs_Tools::getArrowSize();
702 SketcherPrs_Tools::setArrowSize(aLen);
703 const double aPrevScale = aViewer->Scale(aViewer->activeView());
704 const double aCurScale = aViewer->activeView()->Camera()->Scale();
705 aViewer->SetScale(aViewer->activeView(), aCurScale);
706 SketcherPrs_Tools::setTextHeight (aCurScale / aPrevScale * SketcherPrs_Tools::getTextHeight());
707 bool isModified = false;
708 QList<AISObjectPtr> aPrsList = aDisplayer->displayedPresentations();
709 foreach (AISObjectPtr aAIS, aPrsList) {
710 Handle(AIS_InteractiveObject) aAisObj = aAIS->impl<Handle(AIS_InteractiveObject)>();
712 Handle(AIS_Dimension) aDim = Handle(AIS_Dimension)::DownCast(aAisObj);
713 if (!aDim.IsNull()) {
714 aDim->DimensionAspect()->ArrowAspect()->SetLength(aLen);
715 aContext->Redisplay(aDim, false);
720 aDisplayer->updateViewer();
723 void PartSet_Module::setCustomized(const FeaturePtr& theFeature)
725 std::shared_ptr<PartSet_CustomPrs> aCustomPrs =
726 std::dynamic_pointer_cast<PartSet_CustomPrs>(myCustomPrs);
727 if (aCustomPrs.get())
728 aCustomPrs->setCustomized(theFeature);
731 bool PartSet_Module::customizeObject(ObjectPtr theObject)
733 ResultPtr aResult = std::dynamic_pointer_cast<ModelAPI_Result>(theObject);
735 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(myWorkshop);
736 XGUI_Workshop* aWorkshop = aConnector->workshop();
737 XGUI_Displayer* aDisplayer = aWorkshop->displayer();
739 AISObjectPtr anAISObj = aDisplayer->getAISObject(aResult);
740 return myCustomPrs->customisePresentation(aResult, anAISObj, myCustomPrs);
743 void PartSet_Module::customizeObjectBrowser(QWidget* theObjectBrowser)
745 XGUI_ObjectsBrowser* aOB = dynamic_cast<XGUI_ObjectsBrowser*>(theObjectBrowser);
747 QLineEdit* aLabel = aOB->activeDocLabel();
748 QPalette aPalet = aLabel->palette();
749 aPalet.setColor(QPalette::Text, QColor(0, 72, 140));
750 aLabel->setPalette(aPalet);
751 aOB->treeView()->setExpandsOnDoubleClick(false);
752 connect(aOB->treeView(), SIGNAL(doubleClicked(const QModelIndex&)),
753 SLOT(onTreeViewDoubleClick(const QModelIndex&)));
754 connect(aOB, SIGNAL(headerMouseDblClicked(const QModelIndex&)),
755 SLOT(onTreeViewDoubleClick(const QModelIndex&)));
756 connect(aOB->treeView(), SIGNAL(doubleClicked(const QModelIndex&)),
757 myDataModel, SLOT(onMouseDoubleClick(const QModelIndex&)));
762 void PartSet_Module::addObjectBrowserMenu(QMenu* theMenu) const
764 QObjectPtrList aObjects = myWorkshop->selection()->selectedObjects();
765 int aSelected = aObjects.size();
766 SessionPtr aMgr = ModelAPI_Session::get();
767 if (aSelected == 1) {
768 bool hasResult = false;
769 bool hasFeature = false;
770 bool hasParameter = false;
771 ModuleBase_Tools::checkObjects(aObjects, hasResult, hasFeature, hasParameter);
773 ObjectPtr aObject = aObjects.first();
775 ResultPartPtr aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aObject);
776 FeaturePtr aPartFeature = std::dynamic_pointer_cast<ModelAPI_Feature>(aObject);
777 bool isPart = aPart.get() ||
778 (aPartFeature.get() && (aPartFeature->getKind() == PartSetPlugin_Part::ID()));
780 DocumentPtr aPartDoc;
782 aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aPartFeature->firstResult());
784 if (aPart.get()) // this may be null is Part feature is disabled
785 aPartDoc = aPart->partDoc();
786 if (aMgr->activeDocument() == aPartDoc)
787 theMenu->addAction(myMenuMgr->action("DEACTIVATE_PART_CMD"));
789 theMenu->addAction(myMenuMgr->action("ACTIVATE_PART_CMD"));
790 } else if (aObject->document() == aMgr->activeDocument()) {
791 if (hasParameter || hasFeature)
792 theMenu->addAction(myMenuMgr->action("EDIT_CMD"));
794 } else { // If feature is 0 the it means that selected root object (document)
795 if (aMgr->activeDocument() != aMgr->moduleDocument())
796 theMenu->addAction(myMenuMgr->action("ACTIVATE_PARTSET_CMD"));
798 } else if (aSelected == 0) {
799 // if there is no selection then it means that upper label is selected
800 QModelIndexList aIndexes = myWorkshop->selection()->selectedIndexes();
801 if (aIndexes.size() == 0) // it means that selection happens in top label outside of tree view
802 if (aMgr->activeDocument() != aMgr->moduleDocument())
803 theMenu->addAction(myMenuMgr->action("ACTIVATE_PARTSET_CMD"));
805 bool aCanDeactivate = (myWorkshop->currentOperation() == 0);
806 myMenuMgr->action("ACTIVATE_PARTSET_CMD")->setEnabled(aCanDeactivate);
807 myMenuMgr->action("DEACTIVATE_PART_CMD")->setEnabled(aCanDeactivate);
808 myMenuMgr->action("ACTIVATE_PART_CMD")->setEnabled(aCanDeactivate);
811 void PartSet_Module::processEvent(const std::shared_ptr<Events_Message>& theMessage)
813 if (theMessage->eventID() == Events_Loop::loop()->eventByName(EVENT_DOCUMENT_CHANGED)) {
814 // Do not change activation of parts if an operation active
815 if (myWorkshop->currentOperation() && myWorkshop->currentOperation()->id().toStdString() != PartSetPlugin_Part::ID())
817 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(myWorkshop);
818 XGUI_Workshop* aWorkshop = aConnector->workshop();
819 XGUI_DataTree* aTreeView = aWorkshop->objectBrowser()->treeView();
820 QLineEdit* aLabel = aWorkshop->objectBrowser()->activeDocLabel();
821 QPalette aPalet = aLabel->palette();
823 SessionPtr aMgr = ModelAPI_Session::get();
824 DocumentPtr aActiveDoc = aMgr->activeDocument();
825 DocumentPtr aDoc = aMgr->moduleDocument();
826 QModelIndex aOldIndex = myDataModel->activePartTree();
827 if (aActiveDoc == aDoc) {
828 if (aOldIndex.isValid())
829 aTreeView->setExpanded(aOldIndex, false);
830 myDataModel->deactivatePart();
831 aPalet.setColor(QPalette::Text, QColor(0, 72, 140));
833 std::string aGrpName = ModelAPI_ResultPart::group();
834 for (int i = 0; i < aDoc->size(aGrpName); i++) {
835 ResultPartPtr aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aDoc->object(aGrpName, i));
836 if (aPart->partDoc() == aActiveDoc) {
837 QModelIndex aIndex = myDataModel->partIndex(aPart);
838 if (myDataModel->activatePart(aIndex)) {
839 if (aOldIndex.isValid())
840 aTreeView->setExpanded(aOldIndex, false);
841 aTreeView->setExpanded(myDataModel->activePartTree(), true);
842 aPalet.setColor(QPalette::Text, Qt::black);
848 aLabel->setPalette(aPalet);
849 aWorkshop->updateCommandStatus();
851 // Update displayed objects in order to update active color
852 XGUI_Displayer* aDisplayer = aWorkshop->displayer();
853 QObjectPtrList aObjects = aDisplayer->displayedObjects();
854 foreach(ObjectPtr aObj, aObjects)
855 aDisplayer->redisplay(aObj, false);
856 aDisplayer->updateViewer();
860 void PartSet_Module::onTreeViewDoubleClick(const QModelIndex& theIndex)
862 if (myWorkshop->currentOperation()) // Do not change activation of parts if an operation active
864 SessionPtr aMgr = ModelAPI_Session::get();
865 if (!theIndex.isValid()) {
866 aMgr->setActiveDocument(aMgr->moduleDocument());
869 if (theIndex.column() != 0) // Use only first column
871 ObjectPtr aObj = myDataModel->object(theIndex);
872 ResultPartPtr aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aObj);
873 if (!aPart.get()) { // Probably this is Feature
874 FeaturePtr aPartFeature = std::dynamic_pointer_cast<ModelAPI_Feature>(aObj);
875 if (aPartFeature.get() && (aPartFeature->getKind() == PartSetPlugin_Part::ID())) {
876 aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aPartFeature->firstResult());
879 if (aPart.get()) { // if this is a part
880 if (aPart->partDoc() == aMgr->activeDocument()) {
881 aMgr->setActiveDocument(aMgr->moduleDocument());