1 // Copyright (C) 2014-20xx CEA/DEN, EDF R&D
3 #include "PartSet_Module.h"
4 #include "PartSet_WidgetSketchLabel.h"
5 #include "PartSet_Validators.h"
6 #include "PartSet_Tools.h"
7 #include "PartSet_PreviewPlanes.h"
8 #include "PartSet_WidgetPoint2d.h"
9 #include "PartSet_WidgetPoint2dDistance.h"
10 #include "PartSet_WidgetPoint2DFlyout.h"
11 #include "PartSet_WidgetShapeSelector.h"
12 #include "PartSet_WidgetMultiSelector.h"
13 #include "PartSet_WidgetEditor.h"
14 #include "PartSet_WidgetFileSelector.h"
15 #include "PartSet_WidgetSketchCreator.h"
16 #include "PartSet_SketcherMgr.h"
17 #include "PartSet_SketcherReetntrantMgr.h"
18 #include "PartSet_ResultSketchPrs.h"
19 #include "PartSet_MenuMgr.h"
20 #include "PartSet_CustomPrs.h"
21 #include "PartSet_IconFactory.h"
22 #include "PartSet_WidgetChoice.h"
23 #include "PartSet_OverconstraintListener.h"
25 #include "PartSet_Filters.h"
26 #include "PartSet_FilterInfinite.h"
28 #include <PartSetPlugin_Remove.h>
29 #include <PartSetPlugin_Part.h>
30 #include <PartSetPlugin_Duplicate.h>
32 #include <ModuleBase_Operation.h>
33 #include <ModuleBase_OperationAction.h>
34 #include <ModuleBase_IViewer.h>
35 #include <ModuleBase_IViewWindow.h>
36 #include <ModuleBase_IPropertyPanel.h>
37 #include <ModuleBase_WidgetEditor.h>
38 #include <ModuleBase_WidgetValidated.h>
39 #include <ModuleBase_FilterFactory.h>
40 #include <ModuleBase_Tools.h>
41 #include <ModuleBase_OperationFeature.h>
42 #include <ModuleBase_WidgetFactory.h>
43 #include <ModuleBase_OperationDescription.h>
44 #include <ModuleBase_ViewerPrs.h>
46 #include <ModelAPI_Object.h>
47 #include <ModelAPI_Events.h>
48 #include <ModelAPI_Validator.h>
49 #include <ModelAPI_Data.h>
50 #include <ModelAPI_Session.h>
51 #include <ModelAPI_ResultBody.h>
52 #include <ModelAPI_AttributeString.h>
53 #include <ModelAPI_AttributeSelectionList.h>
55 #include <GeomDataAPI_Point2D.h>
56 #include <GeomDataAPI_Point.h>
57 #include <GeomDataAPI_Dir.h>
59 #include <XGUI_Displayer.h>
60 #include <XGUI_Workshop.h>
61 #include <XGUI_OperationMgr.h>
62 #include <XGUI_PropertyPanel.h>
63 #include <XGUI_ModuleConnector.h>
64 #include <XGUI_ContextMenuMgr.h>
65 #include <XGUI_Tools.h>
66 #include <XGUI_ObjectsBrowser.h>
67 #include <XGUI_SelectionMgr.h>
68 #include <XGUI_DataModel.h>
69 #include <XGUI_ErrorMgr.h>
70 #include <XGUI_CustomPrs.h>
72 #include <SketchPlugin_Feature.h>
73 #include <SketchPlugin_Sketch.h>
74 #include <SketchPlugin_ConstraintAngle.h>
75 #include <SketchPlugin_ConstraintLength.h>
76 #include <SketchPlugin_ConstraintDistance.h>
77 #include <SketchPlugin_ConstraintParallel.h>
78 #include <SketchPlugin_ConstraintPerpendicular.h>
79 #include <SketchPlugin_ConstraintRadius.h>
81 #include <SketcherPrs_SymbolPrs.h>
82 #include <SketcherPrs_Tools.h>
84 #include <Events_Loop.h>
85 #include <Config_PropManager.h>
86 #include <Config_Keywords.h>
88 #include <StdSelect_TypeOfFace.hxx>
89 #include <TopoDS_Vertex.hxx>
91 #include <TopoDS_Shape.hxx>
92 #include <BRep_Tool.hxx>
93 #include <AIS_Dimension.hxx>
96 #include <QMouseEvent>
99 #include <QApplication>
100 #include <QMessageBox>
101 #include <QMainWindow>
105 #include <GeomAlgoAPI_FaceBuilder.h>
106 #include <GeomDataAPI_Dir.h>
108 #include <SelectMgr_ListIteratorOfListOfFilter.hxx>
114 /*!Create and return new instance of XGUI_Module*/
115 extern "C" PARTSET_EXPORT ModuleBase_IModule* createModule(ModuleBase_IWorkshop* theWshop)
117 return new PartSet_Module(theWshop);
120 PartSet_Module::PartSet_Module(ModuleBase_IWorkshop* theWshop)
121 : ModuleBase_IModule(theWshop),
124 new PartSet_IconFactory();
126 mySketchMgr = new PartSet_SketcherMgr(this);
127 mySketchReentrantMgr = new PartSet_SketcherReetntrantMgr(theWshop);
129 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(theWshop);
130 XGUI_Workshop* aWorkshop = aConnector->workshop();
132 ModuleBase_IViewer* aViewer = theWshop->viewer();
133 connect(aViewer, SIGNAL(keyRelease(ModuleBase_IViewWindow*, QKeyEvent*)),
134 this, SLOT(onKeyRelease(ModuleBase_IViewWindow*, QKeyEvent*)));
135 connect(aViewer, SIGNAL(viewTransformed(int)),
136 SLOT(onViewTransformed(int)));
137 connect(aViewer, SIGNAL(viewCreated(ModuleBase_IViewWindow*)),
138 SLOT(onViewCreated(ModuleBase_IViewWindow*)));
139 myMenuMgr = new PartSet_MenuMgr(this);
140 myCustomPrs = new PartSet_CustomPrs(theWshop);
142 myOverconstraintListener = new PartSet_OverconstraintListener(theWshop);
144 Events_Loop* aLoop = Events_Loop::loop();
145 aLoop->registerListener(this, Events_Loop::eventByName(EVENT_DOCUMENT_CHANGED));
147 mySelectionFilters.Append(new PartSet_GlobalFilter(myWorkshop));
148 mySelectionFilters.Append(new PartSet_FilterInfinite(myWorkshop));
150 myHasConstraintShown[PartSet_Tools::Geometrical] = true;
151 myHasConstraintShown[PartSet_Tools::Dimensional] = true;
152 myHasConstraintShown[PartSet_Tools::Expressions] = false;
154 Config_PropManager::registerProp("Visualization", "operation_parameter_color",
155 "Reference shape wireframe color in operation", Config_Prop::Color,
156 PartSet_CustomPrs::OPERATION_PARAMETER_COLOR());
157 Config_PropManager::registerProp("Visualization", "operation_result_color",
158 "Result shape wireframe color in operation", Config_Prop::Color,
159 PartSet_CustomPrs::OPERATION_RESULT_COLOR());
160 Config_PropManager::registerProp("Visualization", "operation_highlight_color",
161 "Multi selector item color in operation", Config_Prop::Color,
162 PartSet_CustomPrs::OPERATION_HIGHLIGHT_COLOR());
165 PartSet_Module::~PartSet_Module()
167 SelectMgr_ListIteratorOfListOfFilter aIt(mySelectionFilters);
168 for (; aIt.More(); aIt.Next()) {
169 Handle(SelectMgr_Filter) aFilter = aIt.Value();
170 if (!aFilter.IsNull())
174 delete myOverconstraintListener;
177 void PartSet_Module::activateSelectionFilters()
179 SelectMgr_ListIteratorOfListOfFilter aIt(mySelectionFilters);
180 for (; aIt.More(); aIt.Next()) {
181 Handle(SelectMgr_Filter) aFilter = aIt.Value();
182 if (!aFilter.IsNull())
183 myWorkshop->viewer()->addSelectionFilter(aFilter);
187 void PartSet_Module::deactivateSelectionFilters()
189 SelectMgr_ListIteratorOfListOfFilter aIt(mySelectionFilters);
190 for (; aIt.More(); aIt.Next()) {
191 Handle(SelectMgr_Filter) aFilter = aIt.Value();
192 if (!aFilter.IsNull())
193 myWorkshop->viewer()->removeSelectionFilter(aFilter);
197 void PartSet_Module::storeSelection()
199 sketchMgr()->storeSelection();
202 void PartSet_Module::restoreSelection()
204 sketchMgr()->restoreSelection();
207 void PartSet_Module::registerValidators()
209 //Registering of validators
210 SessionPtr aMgr = ModelAPI_Session::get();
211 ModelAPI_ValidatorsFactory* aFactory = aMgr->validators();
212 aFactory->registerValidator("PartSet_DistanceSelection", new PartSet_DistanceSelection);
213 aFactory->registerValidator("PartSet_LengthSelection", new PartSet_LengthSelection);
214 aFactory->registerValidator("PartSet_PerpendicularSelection", new PartSet_PerpendicularSelection);
215 aFactory->registerValidator("PartSet_ParallelSelection", new PartSet_ParallelSelection);
216 aFactory->registerValidator("PartSet_RadiusSelection", new PartSet_RadiusSelection);
217 aFactory->registerValidator("PartSet_RigidSelection", new PartSet_RigidSelection);
218 aFactory->registerValidator("PartSet_CoincidentSelection", new PartSet_CoincidentSelection);
219 aFactory->registerValidator("PartSet_HVDirSelection", new PartSet_HVDirSelection);
220 aFactory->registerValidator("PartSet_TangentSelection", new PartSet_TangentSelection);
221 aFactory->registerValidator("PartSet_FilletSelection", new PartSet_FilletSelection);
222 aFactory->registerValidator("PartSet_AngleSelection", new PartSet_AngleSelection);
223 aFactory->registerValidator("PartSet_EqualSelection", new PartSet_EqualSelection);
224 aFactory->registerValidator("PartSet_CollinearSelection", new PartSet_CollinearSelection);
225 aFactory->registerValidator("PartSet_MiddlePointSelection", new PartSet_MiddlePointSelection);
226 aFactory->registerValidator("PartSet_DifferentObjects", new PartSet_DifferentObjectsValidator);
227 aFactory->registerValidator("PartSet_CoincidentAttr", new PartSet_CoincidentAttr);
230 void PartSet_Module::registerFilters()
232 //Registering of selection filters
233 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
234 ModuleBase_FilterFactory* aFactory = aConnector->selectionFilters();
237 void PartSet_Module::registerProperties()
239 Config_PropManager::registerProp("Sketch planes", "planes_size", "Size", Config_Prop::Double,
241 Config_PropManager::registerProp("Sketch planes", "planes_thickness", "Thickness",
242 Config_Prop::Integer, SKETCH_WIDTH);
243 Config_PropManager::registerProp("Sketch planes", "rotate_to_plane", "Rotate to plane when selected",
244 Config_Prop::Boolean, "false");
247 void PartSet_Module::connectToPropertyPanel(ModuleBase_ModelWidget* theWidget, const bool isToConnect)
249 mySketchMgr->connectToPropertyPanel(theWidget, isToConnect);
252 void PartSet_Module::operationCommitted(ModuleBase_Operation* theOperation)
254 if (PartSet_SketcherMgr::isNestedSketchOperation(theOperation)) {
255 mySketchMgr->commitNestedSketch(theOperation);
258 /// Restart sketcher operations automatically
259 if (!mySketchReentrantMgr->operationCommitted(theOperation)) {
261 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>(theOperation);
262 if (aFOperation && !aFOperation->isEditOperation()) {
263 // the selection is cleared after commit the create operation
264 // in order to do not use the same selected objects in the restarted operation
265 // for common behaviour, the selection is cleared even if the operation is not restarted
266 getWorkshop()->selector()->clearSelection();
271 void PartSet_Module::operationAborted(ModuleBase_Operation* theOperation)
273 /// Restart sketcher operations automatically
274 mySketchReentrantMgr->operationAborted(theOperation);
277 void PartSet_Module::operationStarted(ModuleBase_Operation* theOperation)
279 ModuleBase_IWorkshop* anIWorkshop = workshop();
280 if (!theOperation->getDescription()->hasXmlRepresentation()) { //!< No need for property panel
281 anIWorkshop->updateCommandStatus();
284 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>
287 XGUI_Workshop* aWorkshop = XGUI_Tools::workshop(anIWorkshop);
288 XGUI_PropertyPanel* aPropertyPanel = aWorkshop->propertyPanel();
289 ModuleBase_ModelWidget* aFilledWidget = 0;
290 bool aPostonedWidgetActivation = false;
291 FeaturePtr aFeature = aFOperation->feature();
293 std::string aGreedAttributeId = ModuleBase_Tools::findGreedAttribute(anIWorkshop, aFeature);
294 // if there is a greed attribute, automatic commit by preselection for this feature is prohibited
295 aWorkshop->setPropertyPanel(aFOperation);
297 // filling the operation values by the current selection
298 // if the operation can be committed after the controls filling, the method perform should
299 // be stopped. Otherwise unnecessary presentations can be shown(e.g. operation prs in sketch)
300 bool isOperationCommitted = false;
301 if (!aFOperation->isEditOperation()) {
302 aFilledWidget = aFOperation->activateByPreselection(aGreedAttributeId);
303 if (currentOperation() != aFOperation)
304 isOperationCommitted = true;
306 if (aGreedAttributeId.empty()) {
307 // a signal should be emitted before the next widget activation
308 // because, the activation of the next widget will give a focus to the widget. As a result
309 // the value of the widget is initialized. And commit may happens until the value is entered.
311 if (mySketchReentrantMgr->canBeCommittedByPreselection())
312 isOperationCommitted = mySketchMgr->operationActivatedByPreselection();
313 // activate the next obligatory widget
314 if (!isOperationCommitted)
315 aPropertyPanel->activateNextWidget(aFilledWidget);
318 else { // there is a greed widget
319 const QList<ModuleBase_ModelWidget*>& aWidgets = aPropertyPanel->modelWidgets();
320 std::string aFirstAttributeId = aWidgets.front()->attributeID();
321 // activate next widget after greeded if it is the first widget in the panel
322 // else the first panel widget is already activated by operation start
323 if (aFirstAttributeId == aGreedAttributeId)
324 aPostonedWidgetActivation = true;
327 } if (!isOperationCommitted) {
328 anIWorkshop->updateCommandStatus();
329 aWorkshop->connectToPropertyPanel(true);
330 operationStartedInternal(aFOperation);
332 // the objects of the current operation should be deactivated
333 QObjectPtrList anObjects;
334 anObjects.append(aFeature);
335 std::list<ResultPtr> aResults = aFeature->results();
336 std::list<ResultPtr>::const_iterator aIt;
337 for (aIt = aResults.begin(); aIt != aResults.end(); ++aIt) {
338 anObjects.append(*aIt);
340 QObjectPtrList::const_iterator anIt = anObjects.begin(), aLast = anObjects.end();
341 for (; anIt != aLast; anIt++)
342 aWorkshop->deactivateActiveObject(*anIt, false);
343 if (anObjects.size() > 0) {
344 XGUI_Displayer* aDisplayer = aWorkshop->displayer();
345 aDisplayer->updateViewer();
348 if (aPostonedWidgetActivation) {
349 // if the widget is an empty in the chain of activated widgets, the current operation
350 // is restarted. It should be performed after functionality of the operation starting
351 aPropertyPanel->activateNextWidget(aFilledWidget);
357 void PartSet_Module::operationStartedInternal(ModuleBase_Operation* theOperation)
359 /// Restart sketcher operations automatically
360 mySketchReentrantMgr->operationStarted(theOperation);
362 if (PartSet_SketcherMgr::isSketchOperation(theOperation)) {
363 mySketchMgr->startSketch(theOperation);
365 else if (PartSet_SketcherMgr::isNestedSketchOperation(theOperation)) {
366 mySketchMgr->startNestedSketch(theOperation);
369 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>(theOperation);
371 myCustomPrs->activate(aFOperation->feature(), ModuleBase_IModule::CustomizeArguments, true);
372 myCustomPrs->activate(aFOperation->feature(), ModuleBase_IModule::CustomizeResults, true);
376 void PartSet_Module::operationResumed(ModuleBase_Operation* theOperation)
378 ModuleBase_IModule::operationResumed(theOperation);
380 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>(theOperation);
382 myCustomPrs->activate(aFOperation->feature(), ModuleBase_IModule::CustomizeArguments, true);
383 myCustomPrs->activate(aFOperation->feature(), ModuleBase_IModule::CustomizeResults, true);
387 void PartSet_Module::operationStopped(ModuleBase_Operation* theOperation)
389 bool isModifiedArgs = myCustomPrs->deactivate(ModuleBase_IModule::CustomizeArguments, false);
390 bool isModifiedResults = myCustomPrs->deactivate(ModuleBase_IModule::CustomizeResults, false);
391 bool isModified = isModifiedArgs || isModifiedResults;
393 if (PartSet_SketcherMgr::isNestedSketchOperation(theOperation)) {
394 mySketchMgr->stopNestedSketch(theOperation);
397 //VSV: Viewer is updated on feature update and redisplay
399 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(myWorkshop);
400 XGUI_Displayer* aDisplayer = aConnector->workshop()->displayer();
401 aDisplayer->updateViewer();
404 QMap<PartSet_Tools::ConstraintVisibleState, bool>::const_iterator anIt = myHasConstraintShown.begin(),
405 aLast = myHasConstraintShown.end();
406 for (; anIt != aLast; anIt++) {
407 myHasConstraintShown[anIt.key()];
408 mySketchMgr->updateBySketchParameters(anIt.key(), anIt.value());
412 ModuleBase_Operation* PartSet_Module::currentOperation() const
414 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
415 XGUI_OperationMgr* anOpMgr = aConnector->workshop()->operationMgr();
416 return anOpMgr->currentOperation();
419 bool PartSet_Module::canUndo() const
421 bool aCanUndo = false;
422 SessionPtr aMgr = ModelAPI_Session::get();
423 if (aMgr->hasModuleDocument() && aMgr->canUndo()) {
424 aCanUndo = !aMgr->isOperation();
425 if (!aCanUndo) // check the enable state additionally by sketch manager
426 aCanUndo = aMgr->canUndo();
431 bool PartSet_Module::canRedo() const
433 bool aCanRedo = false;
434 SessionPtr aMgr = ModelAPI_Session::get();
435 if (aMgr->hasModuleDocument() && aMgr->canRedo()) {
436 aCanRedo = !aMgr->isOperation();
437 if (!aCanRedo) // check the enable state additionally by sketch manager
438 aCanRedo = aMgr->canRedo();
443 bool PartSet_Module::canApplyAction(const ObjectPtr& theObject, const QString& theActionId) const
446 if (theActionId == "MOVE_CMD") {
447 FeaturePtr aFeature = ModelAPI_Feature::feature(theObject);
449 // part features can not be moved in the history.
450 if (aFeature->getKind() == PartSetPlugin_Part::ID())
457 bool PartSet_Module::canEraseObject(const ObjectPtr& theObject) const
459 // the sketch manager put the restriction to the objects erase
460 return mySketchMgr->canEraseObject(theObject);
463 bool PartSet_Module::canDisplayObject(const ObjectPtr& theObject) const
465 // the sketch manager put the restriction to the objects display
466 return mySketchMgr->canDisplayObject(theObject);
469 void PartSet_Module::processHiddenObject(const std::list<ObjectPtr>& theObjects)
471 mySketchMgr->processHiddenObject(theObjects);
474 bool PartSet_Module::canActivateSelection(const ObjectPtr& theObject) const
476 bool aCanActivate = ModuleBase_IModule::canActivateSelection(theObject);
478 ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
479 bool isSketchOp = PartSet_SketcherMgr::isSketchOperation(anOperation),
480 isNestedOp = PartSet_SketcherMgr::isNestedSketchOperation(anOperation);
481 if (isSketchOp || isNestedOp) {
482 // in active sketch operation it is possible to activate operation object in selection
483 // in the edit operation, e.g. points of the line can be moved when the line is edited
484 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>(anOperation);
485 aCanActivate = aCanActivate || (aFOperation && aFOperation->isEditOperation());
490 bool PartSet_Module::addViewerMenu(QMenu* theMenu, const QMap<QString, QAction*>& theStdActions) const
492 return myMenuMgr->addViewerMenu(theMenu, theStdActions);
495 void PartSet_Module::updateViewerMenu(const QMap<QString, QAction*>& theStdActions)
497 myMenuMgr->updateViewerMenu(theStdActions);
500 QString PartSet_Module::getFeatureError(const FeaturePtr& theFeature)
502 QString anError = ModuleBase_IModule::getFeatureError(theFeature);
503 if (anError.isEmpty())
504 anError = sketchMgr()->getFeatureError(theFeature);
509 void PartSet_Module::grantedOperationIds(ModuleBase_Operation* theOperation,
510 QStringList& theIds) const
512 myMenuMgr->grantedOperationIds(theOperation, theIds);
514 if (PartSet_SketcherMgr::isSketchOperation(theOperation)) {
515 XGUI_Workshop* aWorkshop = getWorkshop();
516 theIds.append(aWorkshop->contextMenuMgr()->action("DELETE_CMD")->text());
520 void PartSet_Module::activeSelectionModes(QIntList& theModes)
523 if (mySketchMgr->activeSketch().get())
524 PartSet_SketcherMgr::sketchSelectionModes(theModes);
527 bool PartSet_Module::isMouseOverWindow()
529 return mySketchMgr->isMouseOverWindow();
532 void PartSet_Module::closeDocument()
537 void PartSet_Module::clearViewer()
539 myCustomPrs->clearPrs();
541 XGUI_Workshop* aWorkshop = getWorkshop();
542 XGUI_Displayer* aDisplayer = aWorkshop->displayer();
543 aDisplayer->deactivateSelectionFilters();
546 void PartSet_Module::propertyPanelDefined(ModuleBase_Operation* theOperation)
548 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>(theOperation);
552 ModuleBase_IPropertyPanel* aPanel = aFOperation->propertyPanel();
553 // we have to manually activate the sketch label in edit mode
554 if (PartSet_SketcherMgr::isSketchOperation(aFOperation) && (aFOperation->isEditOperation()))
555 aPanel->activateWidget(aPanel->modelWidgets().first());
558 bool PartSet_Module::createWidgets(ModuleBase_Operation* theOperation,
559 QList<ModuleBase_ModelWidget*>& theWidgets) const
561 bool aProcessed = false;
563 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>(theOperation);
564 XGUI_Workshop* aWorkshop = getWorkshop();
565 XGUI_PropertyPanel* aPropertyPanel = aWorkshop->propertyPanel();
566 if (mySketchMgr->activeSketch().get() && aFOperation && aPropertyPanel) {
567 ModuleBase_ISelection* aSelection = workshop()->selection();
568 // click on a point in sketch leads here with the point is highlighted, not yet selected
569 QList<ModuleBase_ViewerPrsPtr> aPreselection = aSelection->getHighlighted();
570 if (aPreselection.size() == 1) {
571 ModuleBase_ViewerPrsPtr aSelectedPrs = aPreselection[0];
572 ObjectPtr anObject = aSelectedPrs->object();
574 FeaturePtr aFeature = ModelAPI_Feature::feature(anObject);
575 FeaturePtr anOpFeature = aFOperation->feature();
576 GeomShapePtr aShape = aSelectedPrs->shape();
577 // click on the digit of dimension constrain comes here with an empty shape, so we need the check
578 if (aFeature == anOpFeature && aShape.get() && !aShape->isNull()) {
579 const TopoDS_Shape& aTDShape = aShape->impl<TopoDS_Shape>();
580 AttributePtr anAttribute = PartSet_Tools::findAttributeBy2dPoint(anObject, aTDShape,
581 mySketchMgr->activeSketch());
582 if (anAttribute.get()) {
583 QString aXmlRepr = aFOperation->getDescription()->xmlRepresentation();
584 ModuleBase_WidgetFactory aFactory(aXmlRepr.toStdString(), workshop());
586 const std::string anAttributeId = anAttribute->id();
587 aFactory.createWidget(aPropertyPanel->contentWidget(), anAttributeId);
589 theWidgets = aFactory.getModelWidgets();
590 // it is possible that the point does not present in XML definition,
591 // in this case, we assume that it is not processed by this module
592 // e.g. "Intersection point" feature
593 aProcessed = !theWidgets.isEmpty();
601 void PartSet_Module::onSelectionChanged()
603 ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
607 bool isSketcherOp = false;
608 // An edit operation is enable only if the current opeation is the sketch operation
609 if (mySketchMgr->activeSketch()) {
610 if (PartSet_Tools::sketchPlane(mySketchMgr->activeSketch()))
611 isSketcherOp = PartSet_SketcherMgr::isSketchOperation(aOperation);
614 // Editing of constraints can be done on selection
615 ModuleBase_ISelection* aSelect = myWorkshop->selection();
616 QList<ModuleBase_ViewerPrsPtr> aSelected = aSelect->getSelected();
617 if (aSelected.size() == 1) {
618 ModuleBase_ViewerPrsPtr aPrs = aSelected.first();
619 ObjectPtr aObject = aPrs->object();
620 FeaturePtr aFeature = ModelAPI_Feature::feature(aObject);
622 std::string aId = aFeature->getKind();
623 if ((aId == SketchPlugin_ConstraintRadius::ID()) ||
624 (aId == SketchPlugin_ConstraintLength::ID()) ||
625 (aId == SketchPlugin_ConstraintDistance::ID()) ||
626 (aId == SketchPlugin_ConstraintAngle::ID())) {
627 editFeature(aFeature);
634 void PartSet_Module::onKeyRelease(ModuleBase_IViewWindow* theWnd, QKeyEvent* theEvent)
636 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
637 XGUI_OperationMgr* anOpMgr = aConnector->workshop()->operationMgr();
638 anOpMgr->onKeyReleased(theWnd->viewPort(), theEvent);
641 ModuleBase_ModelWidget* PartSet_Module::createWidgetByType(const std::string& theType,
643 Config_WidgetAPI* theWidgetApi)
645 ModuleBase_IWorkshop* aWorkshop = workshop();
646 XGUI_Workshop* aXUIWorkshop = getWorkshop();
647 ModuleBase_ModelWidget* aWgt = NULL;
648 if (theType == "sketch-start-label") {
649 PartSet_WidgetSketchLabel* aLabelWgt = new PartSet_WidgetSketchLabel(theParent, aWorkshop,
650 theWidgetApi, myHasConstraintShown);
651 connect(aLabelWgt, SIGNAL(planeSelected(const std::shared_ptr<GeomAPI_Pln>&)),
652 mySketchMgr, SLOT(onPlaneSelected(const std::shared_ptr<GeomAPI_Pln>&)));
653 connect(aLabelWgt, SIGNAL(showConstraintToggled(int, bool)),
654 mySketchMgr, SLOT(onShowConstraintsToggle(int, bool)));
656 } else if (theType == "sketch-2dpoint_selector") {
657 PartSet_WidgetPoint2D* aPointWgt = new PartSet_WidgetPoint2D(theParent, aWorkshop,
659 aPointWgt->setSketch(mySketchMgr->activeSketch());
660 connect(aPointWgt, SIGNAL(vertexSelected()), sketchReentranceMgr(), SLOT(onVertexSelected()));
662 }else if (theType == "sketch-2dpoint_flyout_selector") {
663 PartSet_WidgetPoint2DFlyout* aPointWgt = new PartSet_WidgetPoint2DFlyout(theParent, aWorkshop,
665 aPointWgt->setSketch(mySketchMgr->activeSketch());
666 connect(aPointWgt, SIGNAL(vertexSelected()), sketchReentranceMgr(), SLOT(onVertexSelected()));
668 } else if (theType == "point2ddistance") {
669 PartSet_WidgetPoint2dDistance* aDistanceWgt = new PartSet_WidgetPoint2dDistance(theParent,
670 aWorkshop, theWidgetApi);
671 aDistanceWgt->setSketch(mySketchMgr->activeSketch());
673 } else if (theType == "sketch_shape_selector") {
674 PartSet_WidgetShapeSelector* aShapeSelectorWgt =
675 new PartSet_WidgetShapeSelector(theParent, aWorkshop, theWidgetApi);
676 aShapeSelectorWgt->setSketcher(mySketchMgr->activeSketch());
677 aWgt = aShapeSelectorWgt;
678 } else if (theType == "sketch_multi_selector") {
679 PartSet_WidgetMultiSelector* aShapeSelectorWgt =
680 new PartSet_WidgetMultiSelector(theParent, aWorkshop, theWidgetApi);
681 aShapeSelectorWgt->setSketcher(mySketchMgr->activeSketch());
682 aWgt = aShapeSelectorWgt;
684 else if (theType == WDG_DOUBLEVALUE_EDITOR) {
685 aWgt = new PartSet_WidgetEditor(theParent, aWorkshop, theWidgetApi);
686 } else if (theType == "export_file_selector") {
687 aWgt = new PartSet_WidgetFileSelector(theParent, aWorkshop, theWidgetApi);
688 } else if (theType == "sketch_launcher") {
689 aWgt = new PartSet_WidgetSketchCreator(theParent, this, theWidgetApi);
690 } else if (theType == "module_choice") {
691 aWgt = new PartSet_WidgetChoice(theParent, theWidgetApi);
692 connect(aWgt, SIGNAL(itemSelected(ModuleBase_ModelWidget*, int)),
693 this, SLOT(onChoiceChanged(ModuleBase_ModelWidget*, int)));
698 ModuleBase_ModelWidget* PartSet_Module::activeWidget() const
700 ModuleBase_ModelWidget* anActiveWidget = 0;
702 anActiveWidget = mySketchReentrantMgr->internalActiveWidget();
703 if (!anActiveWidget) {
704 ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
706 ModuleBase_IPropertyPanel* aPanel = aOperation->propertyPanel();
707 anActiveWidget = aPanel->activeWidget();
710 return anActiveWidget;
713 bool PartSet_Module::deleteObjects()
715 bool isProcessed = false;
717 XGUI_Workshop* aWorkshop = getWorkshop();
718 XGUI_OperationMgr* anOpMgr = aWorkshop->operationMgr();
720 //SessionPtr aMgr = ModelAPI_Session::get();
721 // 1. check whether the delete should be processed in the module
722 ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
723 bool isSketchOp = PartSet_SketcherMgr::isSketchOperation(anOperation),
724 isNestedOp = PartSet_SketcherMgr::isNestedSketchOperation(anOperation);
725 if (isSketchOp || isNestedOp) {
727 // 2. find selected presentations
728 // selected objects should be collected before the current operation abort because
729 // the abort leads to selection lost on constraint objects. It can be corrected after #386 issue
730 ModuleBase_ISelection* aSel = workshop()->selection();
731 QObjectPtrList aSelectedObj = aSel->selectedPresentations();
732 // if there are no selected objects in the viewer, that means that the selection in another
733 // place cased this method. It is necessary to return the false value to understande in above
734 // method that delete is not processed
735 if (aSelectedObj.count() == 0)
738 // avoid delete of the objects, which are not belong to the current sketch
739 // in order to do not delete results of other sketches
740 QObjectPtrList aSketchObjects;
741 QObjectPtrList::const_iterator anIt = aSelectedObj.begin(), aLast = aSelectedObj.end();
742 for ( ; anIt != aLast; anIt++) {
743 ObjectPtr anObject = *anIt;
744 if (mySketchMgr->isObjectOfSketch(anObject)) {
745 // sketch feature should be used in this list because workshop deletes features only
746 // results are skipped
747 FeaturePtr aSketchFeature = ModelAPI_Feature::feature(anObject);
748 aSketchObjects.append(aSketchFeature);
751 // if the selection contains only local selected presentations from other sketches,
752 // the Delete operation should not be done at all
753 if (aSketchObjects.size() == 0)
756 // 3. start operation
757 QString aDescription = aWorkshop->contextMenuMgr()->action("DELETE_CMD")->text();
758 ModuleBase_OperationAction* anOpAction = new ModuleBase_OperationAction(aDescription, this);
760 // the active nested sketch operation should be aborted unconditionally
761 // the Delete action should be additionally granted for the Sketch operation
762 // in order to do not abort/commit it
763 if (!anOpMgr->canStartOperation(anOpAction->id()))
764 return true; // the objects are processed but can not be deleted
766 anOpMgr->startOperation(anOpAction);
768 // 4. delete features
769 // sketch feature should be skipped, only sub-features can be removed
770 // when sketch operation is active
771 aWorkshop->deleteFeatures(aSketchObjects);
773 anOpMgr->commitOperation();
778 void PartSet_Module::onFeatureTriggered()
780 QAction* aCmd = dynamic_cast<QAction*>(sender());
781 if (aCmd->isCheckable() && aCmd->isChecked()) {
782 // 1. check whether the delete should be processed in the module
783 ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
784 bool isNestedOp = PartSet_SketcherMgr::isNestedCreateOperation(anOperation);
786 // in case if in the viewer nothing is displayed, the create operation should not be
787 // comitted even if all values of the feature are initialized
788 if (!mySketchMgr->canDisplayCurrentCreatedFeature()) {
789 // the action information should be saved before the operation is aborted
790 // because this abort leads to update command status, which unchecks this action
791 anOperation->abort();
792 launchOperation(aCmd->data().toString());
796 ModuleBase_IModule::onFeatureTriggered();
799 void PartSet_Module::editFeature(FeaturePtr theFeature)
801 storeConstraintsState(theFeature->getKind());
802 ModuleBase_IModule::editFeature(theFeature);
805 bool PartSet_Module::canCommitOperation() const
810 void PartSet_Module::launchOperation(const QString& theCmdId)
812 storeConstraintsState(theCmdId.toStdString());
813 ModuleBase_IModule::launchOperation(theCmdId);
816 void PartSet_Module::storeConstraintsState(const std::string& theFeatureKind)
818 if (myWorkshop->currentOperation() &&
819 myWorkshop->currentOperation()->id().toStdString() == SketchPlugin_Sketch::ID()) {
820 const QMap<PartSet_Tools::ConstraintVisibleState, bool>& aShownStates =
821 mySketchMgr->showConstraintStates();
822 myHasConstraintShown = aShownStates;
824 if (PartSet_SketcherMgr::constraintsIdList().contains(theFeatureKind.c_str())) {
825 // Show constraints if a constraint was anOperation
826 mySketchMgr->updateBySketchParameters(PartSet_Tools::Geometrical, true);
827 mySketchMgr->updateBySketchParameters(PartSet_Tools::Dimensional, true);
828 mySketchMgr->updateBySketchParameters(PartSet_Tools::Expressions,
829 myHasConstraintShown[PartSet_Tools::Expressions]);
833 void PartSet_Module::onObjectDisplayed(ObjectPtr theObject, AISObjectPtr theAIS)
835 Handle(AIS_InteractiveObject) anAIS = theAIS->impl<Handle(AIS_InteractiveObject)>();
836 if (!anAIS.IsNull()) {
837 Handle(AIS_InteractiveContext) aCtx = anAIS->GetContext();
838 Handle(AIS_Dimension) aDim = Handle(AIS_Dimension)::DownCast(anAIS);
839 if (!aDim.IsNull()) {
840 aCtx->SetZLayer(aDim, myVisualLayerId);
842 Handle(SketcherPrs_SymbolPrs) aCons = Handle(SketcherPrs_SymbolPrs)::DownCast(anAIS);
844 aCtx->SetZLayer(aCons, myVisualLayerId);
849 void PartSet_Module::onBeforeObjectErase(ObjectPtr theObject, AISObjectPtr theAIS)
852 // it should be recomputed in order to disappear in the viewer if the corresponded object
854 //if (myCustomPrs->isActive())
855 // myCustomPrs->redisplay(theObject, false);
858 void PartSet_Module::onViewTransformed(int theTrsfType)
860 // Set length of arrows constant in pixel size
861 // if the operation is panning or rotate or panglobal then do nothing
862 if ((theTrsfType == 1) || (theTrsfType == 3) || (theTrsfType == 4))
864 ModuleBase_IViewer* aViewer = myWorkshop->viewer();
865 Handle(AIS_InteractiveContext) aContext = aViewer->AISContext();
866 if (aContext.IsNull())
869 //Handle(V3d_View) aView = aViewer->activeView();
871 XGUI_Workshop* aWorkshop = getWorkshop();
872 XGUI_Displayer* aDisplayer = aWorkshop->displayer();
873 Handle(V3d_Viewer) aV3dViewer = aContext->CurrentViewer();
874 Handle(V3d_View) aView;
876 for (aV3dViewer->InitDefinedViews();
877 aV3dViewer->MoreDefinedViews();
878 aV3dViewer->NextDefinedViews()) {
879 Handle(V3d_View) aV = aV3dViewer->DefinedView();
880 double aS = aV->Scale();
888 double aLen = aView->Convert(SketcherPrs_Tools::getDefaultArrowSize());
890 double aPrevLen = SketcherPrs_Tools::getArrowSize();
891 SketcherPrs_Tools::setArrowSize(aLen);
892 const double aPrevScale = aViewer->Scale(aViewer->activeView());
893 const double aCurScale = aViewer->activeView()->Camera()->Scale();
894 aViewer->SetScale(aViewer->activeView(), aCurScale);
895 SketcherPrs_Tools::setTextHeight (aCurScale / aPrevScale * SketcherPrs_Tools::getTextHeight());
896 bool isModified = false;
897 QList<AISObjectPtr> aPrsList = aDisplayer->displayedPresentations();
898 foreach (AISObjectPtr aAIS, aPrsList) {
899 Handle(AIS_InteractiveObject) aAisObj = aAIS->impl<Handle(AIS_InteractiveObject)>();
901 Handle(AIS_Dimension) aDim = Handle(AIS_Dimension)::DownCast(aAisObj);
902 if (!aDim.IsNull()) {
903 aDim->DimensionAspect()->ArrowAspect()->SetLength(aLen);
904 aContext->Redisplay(aDim, false);
909 aDisplayer->updateViewer();
912 void PartSet_Module::activateCustomPrs(const FeaturePtr& theFeature, const ModuleBase_CustomizeFlag& theFlag,
913 const bool theUpdateViewer)
915 myCustomPrs->activate(theFeature, theFlag, theUpdateViewer);
918 void PartSet_Module::deactivateCustomPrs(const ModuleBase_CustomizeFlag& theFlag,
919 const bool theUpdateViewer)
921 myCustomPrs->deactivate(theFlag, theUpdateViewer);
924 bool PartSet_Module::customisePresentation(ResultPtr theResult, AISObjectPtr thePrs,
925 std::shared_ptr<GeomAPI_ICustomPrs> theCustomPrs)
927 bool aCustomized = false;
932 XGUI_Workshop* aWorkshop = getWorkshop();
933 XGUI_Displayer* aDisplayer = aWorkshop->displayer();
934 ObjectPtr anObject = aDisplayer->getObject(thePrs);
935 if (anObject.get()) {
936 bool isConflicting = myOverconstraintListener->isConflictingObject(anObject);
937 // customize sketch symbol presentation
939 Handle(AIS_InteractiveObject) anAISIO = thePrs->impl<Handle(AIS_InteractiveObject)>();
940 if (!anAISIO.IsNull()) {
941 if (!Handle(SketcherPrs_SymbolPrs)::DownCast(anAISIO).IsNull()) {
942 Handle(SketcherPrs_SymbolPrs) aPrs = Handle(SketcherPrs_SymbolPrs)::DownCast(anAISIO);
943 if (!aPrs.IsNull()) {
944 std::vector<int> aColor;
945 myOverconstraintListener->getConflictingColor(aColor);
946 aPrs->SetConflictingConstraint(isConflicting, aColor);
952 // customize sketch dimension constraint presentation
954 std::vector<int> aColor;
956 myOverconstraintListener->getConflictingColor(aColor);
959 XGUI_CustomPrs::getDefaultColor(anObject, true, aColor);
960 if (!aColor.empty()) {
961 thePrs->setColor(aColor[0], aColor[1], aColor[2]);
966 // customize dimentional constrains
967 sketchMgr()->customizePresentation(anObject);
973 bool PartSet_Module::customizeObject(ObjectPtr theObject, const ModuleBase_CustomizeFlag& theFlag,
974 const bool theUpdateViewer)
976 bool isRedisplayed = false;
977 if (myCustomPrs->isActive(theFlag))
978 isRedisplayed = myCustomPrs->redisplay(theObject, theFlag, theUpdateViewer);
980 return isRedisplayed;
983 void PartSet_Module::customizeObjectBrowser(QWidget* theObjectBrowser)
985 XGUI_ObjectsBrowser* aOB = dynamic_cast<XGUI_ObjectsBrowser*>(theObjectBrowser);
987 QLabel* aLabel = aOB->activeDocLabel();
988 aLabel->installEventFilter(myMenuMgr);
989 connect(aLabel, SIGNAL(customContextMenuRequested(const QPoint&)),
990 SLOT(onActiveDocPopup(const QPoint&)));
991 //QPalette aPalet = aLabel->palette();
992 //aPalet.setColor(QPalette::Text, QColor(0, 72, 140));
993 //aLabel->setPalette(aPalet);
994 aOB->treeView()->setExpandsOnDoubleClick(false);
995 connect(aOB->treeView(), SIGNAL(doubleClicked(const QModelIndex&)),
996 SLOT(onTreeViewDoubleClick(const QModelIndex&)));
1000 void PartSet_Module::onActiveDocPopup(const QPoint& thePnt)
1002 SessionPtr aMgr = ModelAPI_Session::get();
1003 QAction* aActivatePartAction = myMenuMgr->action("ACTIVATE_PARTSET_CMD");
1005 XGUI_Workshop* aWorkshop = getWorkshop();
1006 QLabel* aHeader = aWorkshop->objectBrowser()->activeDocLabel();
1008 aActivatePartAction->setEnabled((aMgr->activeDocument() != aMgr->moduleDocument()));
1011 aMenu.addAction(aActivatePartAction);
1012 aMenu.exec(aHeader->mapToGlobal(thePnt));
1015 Handle(AIS_InteractiveObject) PartSet_Module::createPresentation(const ResultPtr& theResult)
1017 return mySketchMgr->createPresentation(theResult);
1021 ObjectPtr PartSet_Module::findPresentedObject(const AISObjectPtr& theAIS) const
1024 ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
1026 /// If last line finished on vertex the lines creation sequence has to be break
1027 ModuleBase_IPropertyPanel* aPanel = aOperation->propertyPanel();
1029 ModuleBase_ModelWidget* anActiveWidget = aPanel->activeWidget();
1030 // if there is an active widget, find the presented object in it
1031 if (!anActiveWidget)
1032 anActiveWidget = aPanel->preselectionWidget();
1034 ModuleBase_WidgetValidated* aWidgetValidated = dynamic_cast<ModuleBase_WidgetValidated*>
1036 if (aWidgetValidated)
1037 anObject = aWidgetValidated->findPresentedObject(theAIS);
1043 bool PartSet_Module::canBeShaded(Handle(AIS_InteractiveObject) theAIS) const
1045 bool aCanBeShaged = true;
1047 Handle(PartSet_ResultSketchPrs) aPrs = Handle(PartSet_ResultSketchPrs)::DownCast(theAIS);
1049 aCanBeShaged = false;
1051 return aCanBeShaged;
1054 void PartSet_Module::addObjectBrowserMenu(QMenu* theMenu) const
1056 QObjectPtrList aObjects = myWorkshop->selection()->selectedObjects();
1057 int aSelected = aObjects.size();
1058 SessionPtr aMgr = ModelAPI_Session::get();
1059 QAction* aActivatePartAction = myMenuMgr->action("ACTIVATE_PART_CMD");
1061 ModuleBase_Operation* aCurrentOp = myWorkshop->currentOperation();
1062 if (aSelected == 1) {
1063 bool hasResult = false;
1064 bool hasFeature = false;
1065 bool hasParameter = false;
1066 bool hasSubFeature = false;
1067 ModuleBase_Tools::checkObjects(aObjects, hasResult, hasFeature, hasParameter, hasSubFeature);
1069 ObjectPtr aObject = aObjects.first();
1071 ResultPartPtr aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aObject);
1072 FeaturePtr aFeature = std::dynamic_pointer_cast<ModelAPI_Feature>(aObject);
1073 bool isPart = aPart.get() ||
1074 (aFeature.get() && (aFeature->getKind() == PartSetPlugin_Part::ID()));
1076 DocumentPtr aPartDoc;
1078 aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aFeature->firstResult());
1080 if (aPart.get()) // this may be null is Part feature is disabled
1081 aPartDoc = aPart->partDoc();
1083 theMenu->addAction(aActivatePartAction);
1084 aActivatePartAction->setEnabled((aMgr->activeDocument() != aPartDoc));
1086 } else if (aObject->document() == aMgr->activeDocument()) {
1087 if (hasParameter || hasFeature) {
1088 myMenuMgr->action("EDIT_CMD")->setEnabled(true);
1089 theMenu->addAction(myMenuMgr->action("EDIT_CMD"));
1090 if (aCurrentOp && aFeature.get()) {
1091 if (aCurrentOp->id().toStdString() == aFeature->getKind())
1092 myMenuMgr->action("EDIT_CMD")->setEnabled(false);
1097 ResultBodyPtr aResult = std::dynamic_pointer_cast<ModelAPI_ResultBody>(aObject);
1099 theMenu->addAction(myMenuMgr->action("SELECT_PARENT_CMD"));
1102 bool aNotDeactivate = (aCurrentOp == 0);
1103 if (!aNotDeactivate) {
1104 aActivatePartAction->setEnabled(false);
1108 void PartSet_Module::processEvent(const std::shared_ptr<Events_Message>& theMessage)
1110 if (theMessage->eventID() == Events_Loop::loop()->eventByName(EVENT_DOCUMENT_CHANGED)) {
1111 // Do not change activation of parts if an operation active
1112 static QStringList aAllowActivationList;
1113 if (aAllowActivationList.isEmpty())
1114 aAllowActivationList <<
1115 QString(PartSetPlugin_Part::ID().c_str()) <<
1116 QString(PartSetPlugin_Duplicate::ID().c_str()) <<
1117 QString(PartSetPlugin_Remove::ID().c_str());
1118 if (myWorkshop->currentOperation() &&
1119 (!aAllowActivationList.contains(myWorkshop->currentOperation()->id())))
1121 XGUI_Workshop* aWorkshop = getWorkshop();
1122 XGUI_DataTree* aTreeView = aWorkshop->objectBrowser()->treeView();
1123 QLabel* aLabel = aWorkshop->objectBrowser()->activeDocLabel();
1124 QPalette aPalet = aLabel->palette();
1126 SessionPtr aMgr = ModelAPI_Session::get();
1127 DocumentPtr aActiveDoc = aMgr->activeDocument();
1128 if (aActivePartIndex.isValid())
1129 aTreeView->setExpanded(aActivePartIndex, false);
1130 XGUI_DataModel* aDataModel = aWorkshop->objectBrowser()->dataModel();
1131 aActivePartIndex = aDataModel->documentRootIndex(aActiveDoc);
1132 if (aActivePartIndex.isValid())
1133 aTreeView->setExpanded(aActivePartIndex, true);
1135 aLabel->setPalette(aPalet);
1136 aWorkshop->updateCommandStatus();
1138 // Update displayed objects in order to update active color
1139 XGUI_Displayer* aDisplayer = aWorkshop->displayer();
1140 QObjectPtrList aObjects = aDisplayer->displayedObjects();
1142 foreach(ObjectPtr aObj, aObjects) {
1143 //TODO: replace by redisplay event.
1144 aHidden = !aObj->data() || !aObj->data()->isValid() ||
1145 aObj->isDisabled() || (!aObj->isDisplayed());
1147 aDisplayer->redisplay(aObj, false);
1149 aDisplayer->updateViewer();
1153 void PartSet_Module::onTreeViewDoubleClick(const QModelIndex& theIndex)
1155 if (myWorkshop->currentOperation()) // Do not change activation of parts if an operation active
1157 SessionPtr aMgr = ModelAPI_Session::get();
1158 if (!theIndex.isValid()) {
1159 aMgr->setActiveDocument(aMgr->moduleDocument());
1162 if (theIndex.column() != 0) // Use only first column
1165 XGUI_Workshop* aWorkshop = getWorkshop();
1166 XGUI_DataModel* aDataModel = aWorkshop->objectBrowser()->dataModel();
1167 // De not use non editable Indexes
1168 if ((aDataModel->flags(theIndex) & Qt::ItemIsSelectable) == 0)
1170 ObjectPtr aObj = aDataModel->object(theIndex);
1172 ResultPartPtr aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aObj);
1173 if (!aPart.get()) { // Probably this is Feature
1174 FeaturePtr aPartFeature = std::dynamic_pointer_cast<ModelAPI_Feature>(aObj);
1175 if (aPartFeature.get() && (aPartFeature->getKind() == PartSetPlugin_Part::ID())) {
1176 aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aPartFeature->firstResult());
1179 if (aPart.get()) { // if this is a part
1180 if (aPart->partDoc() == aMgr->activeDocument()) {
1181 myMenuMgr->activatePartSet();
1189 void PartSet_Module::onViewCreated(ModuleBase_IViewWindow*)
1191 // z layer is created for all started operations in order to visualize operation AIS presentation
1193 Handle(AIS_InteractiveContext) aContext = myWorkshop->viewer()->AISContext();
1194 if (aContext.IsNull())
1197 Handle(V3d_Viewer) aViewer = aContext->CurrentViewer();
1198 if (myVisualLayerId == 0) {
1199 if (myVisualLayerId == 0)
1200 aViewer->AddZLayer(myVisualLayerId);
1202 TColStd_SequenceOfInteger aZList;
1203 aViewer->GetAllZLayers(aZList);
1204 bool aFound = false;
1205 for (int i = 1; i <= aZList.Length(); i++) {
1206 if (aZList(i) == myVisualLayerId) {
1212 aViewer->AddZLayer(myVisualLayerId);
1214 // if there is an active operation with validated widget,
1215 // the filters of this widget should be activated in the created view
1216 ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
1218 ModuleBase_ModelWidget* anActiveWidget = activeWidget();
1219 if (anActiveWidget) {
1220 ModuleBase_WidgetSelector* aWSelector = dynamic_cast<ModuleBase_WidgetSelector*>(anActiveWidget);
1222 aWSelector->activateSelectionAndFilters(true);
1227 //******************************************************
1228 void PartSet_Module::widgetStateChanged(int thePreviousState)
1230 mySketchMgr->widgetStateChanged(thePreviousState);
1233 bool PartSet_Module::processEnter(const std::string& thePreviousAttributeID)
1235 return mySketchReentrantMgr->processEnter(thePreviousAttributeID);
1238 //******************************************************
1239 void PartSet_Module::beforeOperationStarted(ModuleBase_Operation* theOperation)
1243 //******************************************************
1244 void PartSet_Module::beforeOperationStopped(ModuleBase_Operation* theOperation)
1246 if (PartSet_SketcherMgr::isSketchOperation(theOperation)) {
1247 mySketchMgr->stopSketch(theOperation);
1251 //******************************************************
1252 GeomShapePtr PartSet_Module::findShape(const AttributePtr& theAttribute)
1254 GeomShapePtr aGeomShape;
1256 ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
1257 if (anOperation && PartSet_SketcherMgr::isNestedSketchOperation(anOperation)) {
1258 aGeomShape = PartSet_Tools::findShapeBy2DPoint(theAttribute, myWorkshop);
1263 //******************************************************
1264 AttributePtr PartSet_Module::findAttribute(const ObjectPtr& theObject,
1265 const GeomShapePtr& theGeomShape)
1267 AttributePtr anAttribute;
1268 GeomShapePtr aGeomShape = theGeomShape;
1269 if (!aGeomShape.get()) {
1270 // processing shape of result, e.g. sketch circle center is selected, this is a result
1271 // the geom shape is empty, the shape of result should be used
1272 ResultPtr aResult = std::dynamic_pointer_cast<ModelAPI_Result>(theObject);
1273 if (aResult.get()) {
1274 aGeomShape = aResult->shape();
1278 if (aGeomShape.get()) {
1279 TopoDS_Shape aTDSShape = aGeomShape->impl<TopoDS_Shape>();
1280 return PartSet_Tools::findAttributeBy2dPoint(theObject, aTDSShape,
1281 mySketchMgr->activeSketch());
1286 //******************************************************
1287 void PartSet_Module::onChoiceChanged(ModuleBase_ModelWidget* theWidget,
1290 PartSet_WidgetChoice* aChoiceWidget = dynamic_cast<PartSet_WidgetChoice*>(theWidget);
1294 QString aChoiceTitle = aChoiceWidget->getPropertyPanelTitle(theIndex);
1295 if (!aChoiceTitle.isEmpty()) {
1296 ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
1299 ModuleBase_IPropertyPanel* aPanel = aOperation->propertyPanel();
1300 aPanel->setWindowTitle(aChoiceTitle);
1304 //******************************************************
1305 XGUI_Workshop* PartSet_Module::getWorkshop() const
1307 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
1308 return aConnector->workshop();