1 // Copyright (C) 2014-20xx CEA/DEN, EDF R&D
3 #include "PartSet_Module.h"
4 #include "PartSet_WidgetSketchLabel.h"
5 #include "PartSet_Validators.h"
6 #include "PartSet_Tools.h"
7 #include "PartSet_WidgetPoint2d.h"
8 #include "PartSet_WidgetPoint2dDistance.h"
9 #include "PartSet_WidgetShapeSelector.h"
10 #include "PartSet_WidgetPoint2dAngle.h"
11 #include "PartSet_WidgetMultiSelector.h"
12 #include "PartSet_WidgetEditor.h"
13 #include "PartSet_WidgetFileSelector.h"
14 #include "PartSet_WidgetSketchCreator.h"
15 #include "PartSet_SketcherMgr.h"
16 #include "PartSet_MenuMgr.h"
17 #include "PartSet_CustomPrs.h"
18 #include "PartSet_IconFactory.h"
20 #include "PartSet_Filters.h"
21 #include "PartSet_FilterInfinite.h"
23 #include <PartSetPlugin_Remove.h>
24 #include <PartSetPlugin_Part.h>
25 #include <PartSetPlugin_Duplicate.h>
27 #include <ModuleBase_Operation.h>
28 #include <ModuleBase_IViewer.h>
29 #include <ModuleBase_IViewWindow.h>
30 #include <ModuleBase_IPropertyPanel.h>
31 #include <ModuleBase_WidgetEditor.h>
32 #include <ModuleBase_WidgetValidated.h>
33 #include <ModuleBase_FilterFactory.h>
34 #include <ModuleBase_Tools.h>
35 #include <GeomValidators_ShapeType.h>
37 #include <GeomValidators_Face.h>
38 #include <GeomValidators_ConstructionComposite.h>
39 #include <GeomValidators_ZeroOffset.h>
40 #include <GeomValidators_BooleanArguments.h>
41 #include <GeomValidators_Different.h>
44 #include <ModelAPI_Object.h>
45 #include <ModelAPI_Events.h>
46 #include <ModelAPI_Validator.h>
47 #include <ModelAPI_Data.h>
48 #include <ModelAPI_Session.h>
49 #include <ModelAPI_ShapeValidator.h>
50 #include <ModelAPI_ResultBody.h>
52 #include <GeomDataAPI_Point2D.h>
53 #include <GeomDataAPI_Point.h>
54 #include <GeomDataAPI_Dir.h>
56 #include <XGUI_Displayer.h>
57 #include <XGUI_Workshop.h>
58 #include <XGUI_OperationMgr.h>
59 #include <XGUI_PropertyPanel.h>
60 #include <XGUI_ModuleConnector.h>
61 #include <XGUI_ContextMenuMgr.h>
62 #include <XGUI_Tools.h>
63 #include <XGUI_ObjectsBrowser.h>
64 #include <XGUI_SelectionMgr.h>
65 #include <XGUI_DataModel.h>
67 #include <SketchPlugin_Feature.h>
68 #include <SketchPlugin_Sketch.h>
69 #include <SketchPlugin_Line.h>
70 #include <SketchPlugin_Arc.h>
71 #include <SketchPlugin_Circle.h>
72 #include <SketchPlugin_Point.h>
73 #include <SketchPlugin_ConstraintAngle.h>
74 #include <SketchPlugin_ConstraintLength.h>
75 #include <SketchPlugin_ConstraintDistance.h>
76 #include <SketchPlugin_ConstraintParallel.h>
77 #include <SketchPlugin_ConstraintPerpendicular.h>
78 #include <SketchPlugin_ConstraintRadius.h>
80 #include <SketcherPrs_SymbolPrs.h>
81 #include <SketcherPrs_Tools.h>
83 #include <Events_Loop.h>
84 #include <Config_PropManager.h>
85 #include <Config_Keywords.h>
87 #include <StdSelect_TypeOfFace.hxx>
88 #include <TopoDS_Vertex.hxx>
90 #include <TopoDS_Shape.hxx>
91 #include <BRep_Tool.hxx>
92 #include <AIS_Dimension.hxx>
95 #include <QMouseEvent>
98 #include <QApplication>
99 #include <QMessageBox>
100 #include <QMainWindow>
103 #include <GeomAlgoAPI_FaceBuilder.h>
104 #include <GeomDataAPI_Dir.h>
106 #include <SelectMgr_ListIteratorOfListOfFilter.hxx>
112 /*!Create and return new instance of XGUI_Module*/
113 extern "C" PARTSET_EXPORT ModuleBase_IModule* createModule(ModuleBase_IWorkshop* theWshop)
115 return new PartSet_Module(theWshop);
118 PartSet_Module::PartSet_Module(ModuleBase_IWorkshop* theWshop)
119 : ModuleBase_IModule(theWshop),
120 myRestartingMode(RM_None), myVisualLayerId(0)
122 new PartSet_IconFactory();
124 mySketchMgr = new PartSet_SketcherMgr(this);
125 myDataModel = new PartSet_DocumentDataModel(this);
127 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(theWshop);
128 XGUI_Workshop* aWorkshop = aConnector->workshop();
130 XGUI_OperationMgr* anOpMgr = aWorkshop->operationMgr();
131 connect(anOpMgr, SIGNAL(keyEnterReleased()), this, SLOT(onEnterReleased()));
132 connect(anOpMgr, SIGNAL(operationActivatedByPreselection()),
133 this, SLOT(onOperationActivatedByPreselection()));
135 ModuleBase_IViewer* aViewer = theWshop->viewer();
136 connect(aViewer, SIGNAL(keyRelease(ModuleBase_IViewWindow*, QKeyEvent*)),
137 this, SLOT(onKeyRelease(ModuleBase_IViewWindow*, QKeyEvent*)));
138 connect(aViewer, SIGNAL(viewTransformed(int)),
139 SLOT(onViewTransformed(int)));
140 connect(aViewer, SIGNAL(viewCreated(ModuleBase_IViewWindow*)),
141 SLOT(onViewCreated(ModuleBase_IViewWindow*)));
143 myMenuMgr = new PartSet_MenuMgr(this);
144 myCustomPrs = new PartSet_CustomPrs(theWshop);
146 Events_Loop* aLoop = Events_Loop::loop();
147 aLoop->registerListener(this, Events_Loop::eventByName(EVENT_DOCUMENT_CHANGED));
149 mySelectionFilters.Append(new PartSet_GlobalFilter(myWorkshop));
150 mySelectionFilters.Append(new PartSet_FilterInfinite(myWorkshop));
153 PartSet_Module::~PartSet_Module()
155 SelectMgr_ListIteratorOfListOfFilter aIt(mySelectionFilters);
156 for (; aIt.More(); aIt.Next()) {
157 Handle(SelectMgr_Filter) aFilter = aIt.Value();
158 if (!aFilter.IsNull())
164 void PartSet_Module::activateSelectionFilters()
166 SelectMgr_ListIteratorOfListOfFilter aIt(mySelectionFilters);
167 for (; aIt.More(); aIt.Next()) {
168 Handle(SelectMgr_Filter) aFilter = aIt.Value();
169 if (!aFilter.IsNull())
170 myWorkshop->viewer()->addSelectionFilter(aFilter);
174 void PartSet_Module::deactivateSelectionFilters()
176 SelectMgr_ListIteratorOfListOfFilter aIt(mySelectionFilters);
177 for (; aIt.More(); aIt.Next()) {
178 Handle(SelectMgr_Filter) aFilter = aIt.Value();
179 if (!aFilter.IsNull())
180 myWorkshop->viewer()->removeSelectionFilter(aFilter);
184 void PartSet_Module::registerValidators()
186 //Registering of validators
187 SessionPtr aMgr = ModelAPI_Session::get();
188 ModelAPI_ValidatorsFactory* aFactory = aMgr->validators();
189 aFactory->registerValidator("PartSet_DistanceSelection", new PartSet_DistanceSelection);
190 aFactory->registerValidator("PartSet_LengthSelection", new PartSet_LengthSelection);
191 aFactory->registerValidator("PartSet_PerpendicularSelection", new PartSet_PerpendicularSelection);
192 aFactory->registerValidator("PartSet_ParallelSelection", new PartSet_ParallelSelection);
193 aFactory->registerValidator("PartSet_RadiusSelection", new PartSet_RadiusSelection);
194 aFactory->registerValidator("PartSet_RigidSelection", new PartSet_RigidSelection);
195 aFactory->registerValidator("PartSet_CoincidentSelection", new PartSet_CoincidentSelection);
196 aFactory->registerValidator("PartSet_HVDirSelection", new PartSet_HVDirSelection);
197 aFactory->registerValidator("PartSet_TangentSelection", new PartSet_TangentSelection);
198 aFactory->registerValidator("PartSet_FilletSelection", new PartSet_FilletSelection);
199 aFactory->registerValidator("PartSet_AngleSelection", new PartSet_AngleSelection);
201 aFactory->registerValidator("PartSet_DifferentObjects", new PartSet_DifferentObjectsValidator);
202 aFactory->registerValidator("PartSet_DifferentShapes", new ModelAPI_ShapeValidator);
204 aFactory->registerValidator("PartSet_CoincidentAttr", new PartSet_CoincidentAttr);
206 aFactory->registerValidator("GeomValidators_ShapeType", new GeomValidators_ShapeType);
207 aFactory->registerValidator("GeomValidators_Face", new GeomValidators_Face);
209 aFactory->registerValidator("GeomValidators_ConstructionComposite",
210 new GeomValidators_ConstructionComposite);
212 aFactory->registerValidator("GeomValidators_ZeroOffset",
213 new GeomValidators_ZeroOffset);
215 aFactory->registerValidator("GeomValidators_BooleanArguments",
216 new GeomValidators_BooleanArguments);
218 aFactory->registerValidator("PartSet_SketchEntityValidator",
219 new PartSet_SketchEntityValidator);
221 aFactory->registerValidator("PartSet_SameTypeAttr",
222 new PartSet_SameTypeAttrValidator);
224 aFactory->registerValidator("GeomValidators_Different",
225 new GeomValidators_Different);
228 void PartSet_Module::registerFilters()
230 //Registering of selection filters
231 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
232 ModuleBase_FilterFactory* aFactory = aConnector->selectionFilters();
235 void PartSet_Module::registerProperties()
237 Config_PropManager::registerProp("Sketch planes", "planes_size", "Size", Config_Prop::Double,
239 Config_PropManager::registerProp("Sketch planes", "planes_thickness", "Thickness",
240 Config_Prop::Integer, SKETCH_WIDTH);
243 void PartSet_Module::onOperationCommitted(ModuleBase_Operation* theOperation)
245 if (PartSet_SketcherMgr::isNestedSketchOperation(theOperation)) {
246 mySketchMgr->commitNestedSketch(theOperation);
249 if (theOperation->isEditOperation())
251 // the selection is cleared after commit the create operation
252 // in order to do not use the same selected objects in the restarted operation
253 // for common behaviour, the selection is cleared even if the operation is not restarted
254 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
255 XGUI_Workshop* aWorkshop = aConnector->workshop();
256 aWorkshop->selector()->clearSelection();
258 /// Restart sketcher operations automatically
259 FeaturePtr aFeature = theOperation->feature();
260 std::shared_ptr<SketchPlugin_Feature> aSPFeature =
261 std::dynamic_pointer_cast<SketchPlugin_Feature>(aFeature);
262 if (aSPFeature && (myRestartingMode == RM_LastFeatureUsed ||
263 myRestartingMode == RM_EmptyFeatureUsed)) {
264 myLastOperationId = theOperation->id();
265 myLastFeature = myRestartingMode == RM_LastFeatureUsed ? theOperation->feature() : FeaturePtr();
267 launchOperation(myLastOperationId);
269 breakOperationSequence();
272 void PartSet_Module::breakOperationSequence()
274 myLastOperationId = "";
275 myLastFeature = FeaturePtr();
276 myRestartingMode = RM_None;
279 void PartSet_Module::onOperationAborted(ModuleBase_Operation* theOperation)
281 breakOperationSequence();
284 void PartSet_Module::onOperationStarted(ModuleBase_Operation* theOperation)
286 if (PartSet_SketcherMgr::isSketchOperation(theOperation)) {
287 mySketchMgr->startSketch(theOperation);
289 else if (PartSet_SketcherMgr::isNestedSketchOperation(theOperation)) {
290 mySketchMgr->startNestedSketch(theOperation);
293 myCustomPrs->activate(theOperation->feature());
296 void PartSet_Module::onOperationStopped(ModuleBase_Operation* theOperation)
298 myCustomPrs->deactivate();
300 if (PartSet_SketcherMgr::isSketchOperation(theOperation)) {
301 mySketchMgr->stopSketch(theOperation);
303 else if (PartSet_SketcherMgr::isNestedSketchOperation(theOperation)) {
304 mySketchMgr->stopNestedSketch(theOperation);
308 ModuleBase_Operation* PartSet_Module::currentOperation() const
310 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
311 XGUI_OperationMgr* anOpMgr = aConnector->workshop()->operationMgr();
312 return anOpMgr->currentOperation();
315 bool PartSet_Module::canUndo() const
317 bool aCanUndo = false;
318 SessionPtr aMgr = ModelAPI_Session::get();
319 if (aMgr->hasModuleDocument() && aMgr->canUndo()) {
320 aCanUndo = !aMgr->isOperation();
321 if (!aCanUndo) // check the enable state additionally by sketch manager
322 aCanUndo = aMgr->canUndo();
327 bool PartSet_Module::canRedo() const
329 bool aCanRedo = false;
330 SessionPtr aMgr = ModelAPI_Session::get();
331 if (aMgr->hasModuleDocument() && aMgr->canRedo()) {
332 aCanRedo = !aMgr->isOperation();
333 if (!aCanRedo) // check the enable state additionally by sketch manager
334 aCanRedo = aMgr->canRedo();
339 bool PartSet_Module::canApplyAction(const ObjectPtr& theObject, const QString& theActionId) const
342 if (theActionId == "DELETE_CMD" || theActionId == "MOVE_CMD") {
343 FeaturePtr aFeature = ModelAPI_Feature::feature(theObject);
345 // part features are removed in the PartSet module only.
346 if (aFeature->getKind() == PartSetPlugin_Part::ID())
353 bool PartSet_Module::canCommitOperation() const
355 return mySketchMgr->canCommitOperation();
358 bool PartSet_Module::canDisplayObject(const ObjectPtr& theObject) const
360 // the sketch manager put the restriction to the objects display
361 return mySketchMgr->canDisplayObject(theObject);
364 bool PartSet_Module::canActivateSelection(const ObjectPtr& theObject) const
366 bool aCanActivate = ModuleBase_IModule::canActivateSelection(theObject);
368 ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
369 bool isSketchOp = PartSet_SketcherMgr::isSketchOperation(anOperation),
370 isNestedOp = PartSet_SketcherMgr::isNestedSketchOperation(anOperation);
371 if (isSketchOp || isNestedOp) {
372 // in active sketch operation it is possible to activate operation object in selection
373 // in the edit operation, e.g. points of the line can be moved when the line is edited
374 aCanActivate = aCanActivate || anOperation->isEditOperation();
379 bool PartSet_Module::addViewerMenu(QMenu* theMenu, const QMap<QString, QAction*>& theStdActions) const
381 return myMenuMgr->addViewerMenu(theMenu, theStdActions);
384 void PartSet_Module::updateViewerMenu(const QMap<QString, QAction*>& theStdActions)
386 myMenuMgr->updateViewerMenu(theStdActions);
390 void PartSet_Module::activeSelectionModes(QIntList& theModes)
393 if (mySketchMgr->activeSketch().get())
394 PartSet_SketcherMgr::sketchSelectionModes(theModes);
397 bool PartSet_Module::isMouseOverWindow()
399 return mySketchMgr->isMouseOverWindow();
402 void PartSet_Module::propertyPanelDefined(ModuleBase_Operation* theOperation)
404 ModuleBase_IPropertyPanel* aPanel = theOperation->propertyPanel();
405 if (PartSet_SketcherMgr::isSketchOperation(theOperation) && (theOperation->isEditOperation())) {
406 // we have to manually activate the sketch label in edit mode
407 aPanel->activateWidget(aPanel->modelWidgets().first());
411 // Restart last operation type
412 if ((theOperation->id() == myLastOperationId) && myLastFeature) {
413 ModuleBase_ModelWidget* aWgt = aPanel->activeWidget();
414 if (theOperation->id().toStdString() == SketchPlugin_Line::ID()) {
415 // Initialise new line with first point equal to end of previous
416 PartSet_WidgetPoint2D* aPnt2dWgt = dynamic_cast<PartSet_WidgetPoint2D*>(aWgt);
418 std::shared_ptr<ModelAPI_Data> aData = myLastFeature->data();
419 std::shared_ptr<GeomDataAPI_Point2D> aPoint =
420 std::dynamic_pointer_cast<GeomDataAPI_Point2D>(aData->attribute(SketchPlugin_Line::END_ID()));
422 aPnt2dWgt->setPoint(aPoint->x(), aPoint->y());
423 PartSet_Tools::setConstraints(mySketchMgr->activeSketch(), theOperation->feature(),
424 aWgt->attributeID(), aPoint->x(), aPoint->y());
425 aPanel->activateNextWidget(aPnt2dWgt);
433 void PartSet_Module::onSelectionChanged()
435 ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
439 bool isSketcherOp = false;
440 // An edit operation is enable only if the current opeation is the sketch operation
441 if (mySketchMgr->activeSketch()) {
442 if (PartSet_Tools::sketchPlane(mySketchMgr->activeSketch()))
443 isSketcherOp = PartSet_SketcherMgr::isSketchOperation(aOperation);
446 // Editing of constraints can be done on selection
447 ModuleBase_ISelection* aSelect = myWorkshop->selection();
448 QList<ModuleBase_ViewerPrs> aSelected = aSelect->getSelected();
449 if (aSelected.size() == 1) {
450 ModuleBase_ViewerPrs aPrs = aSelected.first();
451 ObjectPtr aObject = aPrs.object();
452 FeaturePtr aFeature = ModelAPI_Feature::feature(aObject);
454 std::string aId = aFeature->getKind();
455 if ((aId == SketchPlugin_ConstraintRadius::ID()) ||
456 (aId == SketchPlugin_ConstraintLength::ID()) ||
457 (aId == SketchPlugin_ConstraintDistance::ID()) ||
458 (aId == SketchPlugin_ConstraintAngle::ID())) {
459 editFeature(aFeature);
466 void PartSet_Module::onKeyRelease(ModuleBase_IViewWindow* theWnd, QKeyEvent* theEvent)
468 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
469 XGUI_OperationMgr* anOpMgr = aConnector->workshop()->operationMgr();
470 anOpMgr->onKeyReleased(theEvent);
473 void PartSet_Module::onEnterReleased()
475 myRestartingMode = RM_EmptyFeatureUsed;
478 void PartSet_Module::onOperationActivatedByPreselection()
480 ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
481 if(anOperation && PartSet_SketcherMgr::isNestedSketchOperation(anOperation)) {
482 // Set final definitions if they are necessary
483 //propertyPanelDefined(aOperation);
485 /// Commit sketcher operations automatically
486 anOperation->commit();
490 void PartSet_Module::onNoMoreWidgets()
492 ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
494 if (PartSet_SketcherMgr::isNestedSketchOperation(anOperation)) {
495 if (myRestartingMode != RM_Forbided)
496 myRestartingMode = RM_LastFeatureUsed;
497 anOperation->commit();
502 void PartSet_Module::onVertexSelected()
504 ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
505 if (aOperation->id().toStdString() == SketchPlugin_Line::ID()) {
506 /// If last line finished on vertex the lines creation sequence has to be break
507 ModuleBase_IPropertyPanel* aPanel = aOperation->propertyPanel();
508 ModuleBase_ModelWidget* anActiveWidget = aPanel->activeWidget();
509 const QList<ModuleBase_ModelWidget*>& aWidgets = aPanel->modelWidgets();
510 QList<ModuleBase_ModelWidget*>::const_iterator anIt = aWidgets.begin(), aLast = aWidgets.end();
511 bool aFoundWidget = false;
512 bool aFoundObligatory = false;
513 for (; anIt != aLast && !aFoundObligatory; anIt++) {
515 aFoundWidget = *anIt == anActiveWidget;
517 aFoundObligatory = (*anIt)->isObligatory();
519 if (!aFoundObligatory)
520 myRestartingMode = RM_Forbided;
524 ModuleBase_ModelWidget* PartSet_Module::createWidgetByType(const std::string& theType, QWidget* theParent,
525 Config_WidgetAPI* theWidgetApi, std::string theParentId)
527 ModuleBase_IWorkshop* aWorkshop = workshop();
528 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(aWorkshop);
529 XGUI_Workshop* aXUIWorkshop = aConnector->workshop();
530 ModuleBase_ModelWidget* aWgt = NULL;
531 if (theType == "sketch-start-label") {
532 PartSet_WidgetSketchLabel* aLabelWgt = new PartSet_WidgetSketchLabel(theParent, aWorkshop,
533 theWidgetApi, theParentId, mySketchMgr->isConstraintsShown());
534 connect(aLabelWgt, SIGNAL(planeSelected(const std::shared_ptr<GeomAPI_Pln>&)),
535 mySketchMgr, SLOT(onPlaneSelected(const std::shared_ptr<GeomAPI_Pln>&)));
536 connect(aLabelWgt, SIGNAL(showConstraintToggled(bool)),
537 mySketchMgr, SLOT(onShowConstraintsToggle(bool)));
539 } else if (theType == "sketch-2dpoint_selector") {
540 PartSet_WidgetPoint2D* aPointWgt = new PartSet_WidgetPoint2D(theParent, aWorkshop,
541 theWidgetApi, theParentId);
542 aPointWgt->setSketch(mySketchMgr->activeSketch());
543 connect(aPointWgt, SIGNAL(vertexSelected()), this, SLOT(onVertexSelected()));
545 } else if (theType == "point2ddistance") {
546 PartSet_WidgetPoint2dDistance* aDistanceWgt = new PartSet_WidgetPoint2dDistance(theParent,
547 aWorkshop, theWidgetApi, theParentId);
548 aDistanceWgt->setSketch(mySketchMgr->activeSketch());
550 } else if(theType == "point2dangle") {
551 PartSet_WidgetPoint2dAngle* anAngleWgt = new PartSet_WidgetPoint2dAngle(theParent,
552 aWorkshop, theWidgetApi, theParentId);
553 anAngleWgt->setSketch(mySketchMgr->activeSketch());
555 } else if (theType == "sketch_shape_selector") {
556 PartSet_WidgetShapeSelector* aShapeSelectorWgt =
557 new PartSet_WidgetShapeSelector(theParent, aWorkshop, theWidgetApi, theParentId);
558 aShapeSelectorWgt->setSketcher(mySketchMgr->activeSketch());
559 aWgt = aShapeSelectorWgt;
560 } else if (theType == "sketch_multi_selector") {
561 PartSet_WidgetMultiSelector* aShapeSelectorWgt =
562 new PartSet_WidgetMultiSelector(theParent, aWorkshop, theWidgetApi, theParentId);
563 aShapeSelectorWgt->setSketcher(mySketchMgr->activeSketch());
564 aWgt = aShapeSelectorWgt;
565 } else if (theType == WDG_DOUBLEVALUE_EDITOR) {
566 aWgt = new PartSet_WidgetEditor(theParent, aWorkshop, theWidgetApi, theParentId);
567 } else if (theType == "export_file_selector") {
568 aWgt = new PartSet_WidgetFileSelector(theParent, aWorkshop, theWidgetApi, theParentId);
569 } else if (theType == "sketch_launcher") {
570 aWgt = new PartSet_WidgetSketchCreator(theParent, this, theWidgetApi, theParentId);
576 bool PartSet_Module::deleteObjects()
578 SessionPtr aMgr = ModelAPI_Session::get();
579 // 1. check whether the delete should be processed in the module
580 ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
581 bool isSketchOp = PartSet_SketcherMgr::isSketchOperation(anOperation),
582 isNestedOp = PartSet_SketcherMgr::isNestedSketchOperation(anOperation);
583 if (isSketchOp || isNestedOp) {
584 // 2. find selected presentations
585 // selected objects should be collected before the current operation abort because
586 // the abort leads to selection lost on constraint objects. It can be corrected after #386 issue
587 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
588 XGUI_Workshop* aWorkshop = aConnector->workshop();
589 ModuleBase_ISelection* aSel = workshop()->selection();
590 QObjectPtrList aSelectedObj = aSel->selectedPresentations();
591 // if there are no selected objects in the viewer, that means that the selection in another
592 // place cased this method. It is necessary to return the false value to understande in above
593 // method that delete is not processed
594 if (aSelectedObj.count() == 0)
597 // avoid delete of the objects, which are not belong to the current sketch
598 // in order to do not delete results of other sketches
599 QObjectPtrList aSketchObjects;
600 QObjectPtrList::const_iterator anIt = aSelectedObj.begin(), aLast = aSelectedObj.end();
601 for ( ; anIt != aLast; anIt++) {
602 ObjectPtr anObject = *anIt;
603 if (mySketchMgr->isObjectOfSketch(anObject)) {
604 // sketch feature should be used in this list because workshop deletes features only
605 // results are skipped
606 FeaturePtr aSketchFeature = ModelAPI_Feature::feature(anObject);
607 aSketchObjects.append(aSketchFeature);
610 // if the selection contains only local selected presentations from other sketches,
611 // the Delete operation should not be done at all
612 if (aSketchObjects.size() == 0)
615 // the active nested sketch operation should be aborted unconditionally
617 anOperation->abort();
619 // 3. start operation
620 QString aDescription = aWorkshop->contextMenuMgr()->action("DELETE_CMD")->text();
621 aMgr->startOperation(aDescription.toStdString());
623 // 4. delete features
624 // sketch feature should be skipped, only sub-features can be removed
625 // when sketch operation is active
626 aWorkshop->deleteFeatures(aSketchObjects);
628 aWorkshop->displayer()->updateViewer();
629 aMgr->finishOperation();
630 XGUI_OperationMgr* anOpMgr = aConnector->workshop()->operationMgr();
631 anOpMgr->updateApplyOfOperations();
633 bool isPartRemoved = false;
634 // Delete part with help of PartSet plugin
635 // TODO: the deleted objects has to be processed by multiselection
636 QObjectPtrList aObjects = myWorkshop->selection()->selectedObjects();
637 if (aObjects.size() == 1) {
638 ObjectPtr aObj = aObjects.first();
639 FeaturePtr aFeature = std::dynamic_pointer_cast<ModelAPI_Feature>(aObj);
640 if (aFeature.get() && (aFeature->getKind() == PartSetPlugin_Part::ID())) {
641 // Remove feature should be created in the document of the part results
642 ResultPtr aPartResult = aFeature->firstResult();
643 if (aPartResult.get()) {
644 std::shared_ptr<ModelAPI_ResultPart> aPart =
645 std::dynamic_pointer_cast<ModelAPI_ResultPart>(aPartResult);
646 DocumentPtr aPartDoc = aPart->partDoc();
647 if (aPartDoc.get()) {
648 aMgr->startOperation(PartSetPlugin_Remove::ID());
649 FeaturePtr aFeature = aPartDoc->addFeature(PartSetPlugin_Remove::ID());
651 aMgr->finishOperation();
652 isPartRemoved = true;
657 return isPartRemoved;
662 void PartSet_Module::onFeatureTriggered()
664 QAction* aCmd = dynamic_cast<QAction*>(sender());
665 if (aCmd->isCheckable() && aCmd->isChecked()) {
666 // 1. check whether the delete should be processed in the module
667 ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
668 bool isNestedOp = PartSet_SketcherMgr::isNestedCreateOperation(anOperation);
670 // in case if in the viewer nothing is displayed, the create operation should not be
671 // comitted even if all values of the feature are initialized
672 if (!mySketchMgr->canDisplayCurrentCreatedFeature()) {
673 // the action information should be saved before the operation is aborted
674 // because this abort leads to update command status, which unchecks this action
675 anOperation->abort();
676 launchOperation(aCmd->data().toString());
680 ModuleBase_IModule::onFeatureTriggered();
683 void PartSet_Module::onObjectDisplayed(ObjectPtr theObject, AISObjectPtr theAIS)
685 Handle(AIS_InteractiveObject) anAIS = theAIS->impl<Handle(AIS_InteractiveObject)>();
686 if (!anAIS.IsNull()) {
687 Handle(AIS_InteractiveContext) aCtx = anAIS->GetContext();
688 Handle(AIS_Dimension) aDim = Handle(AIS_Dimension)::DownCast(anAIS);
689 if (!aDim.IsNull()) {
690 aCtx->SetZLayer(aDim, myVisualLayerId);
692 Handle(SketcherPrs_SymbolPrs) aCons = Handle(SketcherPrs_SymbolPrs)::DownCast(anAIS);
694 aCtx->SetZLayer(aCons, myVisualLayerId);
699 void PartSet_Module::onBeforeObjectErase(ObjectPtr theObject, AISObjectPtr theAIS)
701 // it should be recomputed in order to disappear in the viewer if the corresponded object
703 if (myCustomPrs->isActive())
704 myCustomPrs->customize(theObject);
707 void PartSet_Module::onViewTransformed(int theTrsfType)
709 // Set length of arrows constant in pixel size
710 // if the operation is panning or rotate or panglobal then do nothing
711 if ((theTrsfType == 1) || (theTrsfType == 3) || (theTrsfType == 4))
714 ModuleBase_IViewer* aViewer = myWorkshop->viewer();
715 //Handle(V3d_View) aView = aViewer->activeView();
717 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(myWorkshop);
718 XGUI_Workshop* aWorkshop = aConnector->workshop();
719 XGUI_Displayer* aDisplayer = aWorkshop->displayer();
720 Handle(AIS_InteractiveContext) aContext = aViewer->AISContext();
722 Handle(V3d_Viewer) aV3dViewer = aContext->CurrentViewer();
723 Handle(V3d_View) aView;
725 for (aV3dViewer->InitDefinedViews();
726 aV3dViewer->MoreDefinedViews();
727 aV3dViewer->NextDefinedViews()) {
728 Handle(V3d_View) aV = aV3dViewer->DefinedView();
729 double aS = aV->Scale();
737 double aLen = aView->Convert(20);
739 double aPrevLen = SketcherPrs_Tools::getArrowSize();
740 SketcherPrs_Tools::setArrowSize(aLen);
741 const double aPrevScale = aViewer->Scale(aViewer->activeView());
742 const double aCurScale = aViewer->activeView()->Camera()->Scale();
743 aViewer->SetScale(aViewer->activeView(), aCurScale);
744 SketcherPrs_Tools::setTextHeight (aCurScale / aPrevScale * SketcherPrs_Tools::getTextHeight());
745 bool isModified = false;
746 QList<AISObjectPtr> aPrsList = aDisplayer->displayedPresentations();
747 foreach (AISObjectPtr aAIS, aPrsList) {
748 Handle(AIS_InteractiveObject) aAisObj = aAIS->impl<Handle(AIS_InteractiveObject)>();
750 Handle(AIS_Dimension) aDim = Handle(AIS_Dimension)::DownCast(aAisObj);
751 if (!aDim.IsNull()) {
752 aDim->DimensionAspect()->ArrowAspect()->SetLength(aLen);
753 aContext->Redisplay(aDim, false);
758 aDisplayer->updateViewer();
761 void PartSet_Module::customizeObject(ObjectPtr theObject)
763 if (myCustomPrs->isActive())
764 myCustomPrs->customize(theObject);
767 void PartSet_Module::customizeObjectBrowser(QWidget* theObjectBrowser)
769 XGUI_ObjectsBrowser* aOB = dynamic_cast<XGUI_ObjectsBrowser*>(theObjectBrowser);
771 QLineEdit* aLabel = aOB->activeDocLabel();
772 QPalette aPalet = aLabel->palette();
773 aPalet.setColor(QPalette::Text, QColor(0, 72, 140));
774 aLabel->setPalette(aPalet);
775 aOB->treeView()->setExpandsOnDoubleClick(false);
776 #ifdef ModuleDataModel
777 connect(aOB->treeView(), SIGNAL(doubleClicked(const QModelIndex&)),
778 SLOT(onTreeViewDoubleClick(const QModelIndex&)));
779 connect(aOB, SIGNAL(headerMouseDblClicked(const QModelIndex&)),
780 SLOT(onTreeViewDoubleClick(const QModelIndex&)));
781 connect(aOB->treeView(), SIGNAL(doubleClicked(const QModelIndex&)),
782 myDataModel, SLOT(onMouseDoubleClick(const QModelIndex&)));
787 ObjectPtr PartSet_Module::findPresentedObject(const AISObjectPtr& theAIS) const
790 ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
792 /// If last line finished on vertex the lines creation sequence has to be break
793 ModuleBase_IPropertyPanel* aPanel = aOperation->propertyPanel();
794 ModuleBase_ModelWidget* anActiveWidget = aPanel->activeWidget();
795 // if there is an active widget, find the presented object in it
797 anActiveWidget = aPanel->preselectionWidget();
799 ModuleBase_WidgetValidated* aWidgetValidated = dynamic_cast<ModuleBase_WidgetValidated*>
801 if (aWidgetValidated)
802 anObject = aWidgetValidated->findPresentedObject(theAIS);
807 void PartSet_Module::addObjectBrowserMenu(QMenu* theMenu) const
809 QObjectPtrList aObjects = myWorkshop->selection()->selectedObjects();
810 int aSelected = aObjects.size();
811 SessionPtr aMgr = ModelAPI_Session::get();
812 if (aSelected == 1) {
813 bool hasResult = false;
814 bool hasFeature = false;
815 bool hasParameter = false;
816 bool hasSubFeature = false;
817 ModuleBase_Tools::checkObjects(aObjects, hasResult, hasFeature, hasParameter, hasSubFeature);
819 ObjectPtr aObject = aObjects.first();
821 ResultPartPtr aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aObject);
822 FeaturePtr aPartFeature = std::dynamic_pointer_cast<ModelAPI_Feature>(aObject);
823 bool isPart = aPart.get() ||
824 (aPartFeature.get() && (aPartFeature->getKind() == PartSetPlugin_Part::ID()));
826 DocumentPtr aPartDoc;
828 aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aPartFeature->firstResult());
830 if (aPart.get()) // this may be null is Part feature is disabled
831 aPartDoc = aPart->partDoc();
832 if (aMgr->activeDocument() == aPartDoc)
833 theMenu->addAction(myMenuMgr->action("DEACTIVATE_PART_CMD"));
835 theMenu->addAction(myMenuMgr->action("ACTIVATE_PART_CMD"));
836 } else if (aObject->document() == aMgr->activeDocument()) {
837 if (hasParameter || hasFeature)
838 theMenu->addAction(myMenuMgr->action("EDIT_CMD"));
841 ResultBodyPtr aResult = std::dynamic_pointer_cast<ModelAPI_ResultBody>(aObject);
844 theMenu->addAction(myMenuMgr->action("SELECT_PARENT_CMD"));
846 } else { // If feature is 0 the it means that selected root object (document)
847 if (aMgr->activeDocument() != aMgr->moduleDocument())
848 theMenu->addAction(myMenuMgr->action("ACTIVATE_PARTSET_CMD"));
850 } else if (aSelected == 0) {
851 // if there is no selection then it means that upper label is selected
852 QModelIndexList aIndexes = myWorkshop->selection()->selectedIndexes();
853 if (aIndexes.size() == 0) // it means that selection happens in top label outside of tree view
854 if (aMgr->activeDocument() != aMgr->moduleDocument())
855 theMenu->addAction(myMenuMgr->action("ACTIVATE_PARTSET_CMD"));
857 bool aCanDeactivate = (myWorkshop->currentOperation() == 0);
858 myMenuMgr->action("ACTIVATE_PARTSET_CMD")->setEnabled(aCanDeactivate);
859 myMenuMgr->action("DEACTIVATE_PART_CMD")->setEnabled(aCanDeactivate);
860 myMenuMgr->action("ACTIVATE_PART_CMD")->setEnabled(aCanDeactivate);
863 void PartSet_Module::processEvent(const std::shared_ptr<Events_Message>& theMessage)
865 if (theMessage->eventID() == Events_Loop::loop()->eventByName(EVENT_DOCUMENT_CHANGED)) {
866 // Do not change activation of parts if an operation active
867 static QStringList aAllowActivationList;
868 if (aAllowActivationList.isEmpty())
869 aAllowActivationList <<
870 QString(PartSetPlugin_Part::ID().c_str()) <<
871 QString(PartSetPlugin_Duplicate::ID().c_str()) <<
872 QString(PartSetPlugin_Remove::ID().c_str());
873 if (myWorkshop->currentOperation() &&
874 (!aAllowActivationList.contains(myWorkshop->currentOperation()->id())))
876 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(myWorkshop);
877 XGUI_Workshop* aWorkshop = aConnector->workshop();
878 XGUI_DataTree* aTreeView = aWorkshop->objectBrowser()->treeView();
879 QLineEdit* aLabel = aWorkshop->objectBrowser()->activeDocLabel();
880 QPalette aPalet = aLabel->palette();
882 SessionPtr aMgr = ModelAPI_Session::get();
883 DocumentPtr aActiveDoc = aMgr->activeDocument();
884 #ifdef ModuleDataModel
885 QModelIndex aOldIndex = myDataModel->activePartTree();
886 DocumentPtr aDoc = aMgr->moduleDocument();
887 if (aActiveDoc == aDoc) {
888 if (aOldIndex.isValid())
889 aTreeView->setExpanded(aOldIndex, false);
890 myDataModel->deactivatePart();
891 aPalet.setColor(QPalette::Text, QColor(0, 72, 140));
893 std::string aGrpName = ModelAPI_ResultPart::group();
894 for (int i = 0; i < aDoc->size(aGrpName); i++) {
895 ResultPartPtr aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aDoc->object(aGrpName, i));
896 if (aPart->partDoc() == aActiveDoc) {
897 QModelIndex aIndex = myDataModel->partIndex(aPart);
898 if (myDataModel->activatePart(aIndex)) {
899 if (aOldIndex.isValid())
900 aTreeView->setExpanded(aOldIndex, false);
901 aTreeView->setExpanded(myDataModel->activePartTree(), true);
902 aPalet.setColor(QPalette::Text, Qt::black);
909 // Problem with MPV: At first time on creation it doesn't work because Part feature
910 // creation event will be sent after
911 if (aActivePartIndex.isValid())
912 aTreeView->setExpanded(aActivePartIndex, false);
913 XGUI_DataModel* aDataModel = aWorkshop->objectBrowser()->dataModel();
914 aActivePartIndex = aDataModel->documentRootIndex(aActiveDoc);
915 if (aActivePartIndex.isValid())
916 aTreeView->setExpanded(aActivePartIndex, true);
918 aLabel->setPalette(aPalet);
919 aWorkshop->updateCommandStatus();
921 // Update displayed objects in order to update active color
922 XGUI_Displayer* aDisplayer = aWorkshop->displayer();
923 QObjectPtrList aObjects = aDisplayer->displayedObjects();
924 foreach(ObjectPtr aObj, aObjects)
925 aDisplayer->redisplay(aObj, false);
926 aDisplayer->updateViewer();
930 void PartSet_Module::onTreeViewDoubleClick(const QModelIndex& theIndex)
932 if (myWorkshop->currentOperation()) // Do not change activation of parts if an operation active
934 SessionPtr aMgr = ModelAPI_Session::get();
935 if (!theIndex.isValid()) {
936 aMgr->setActiveDocument(aMgr->moduleDocument());
939 if (theIndex.column() != 0) // Use only first column
941 ObjectPtr aObj = myDataModel->object(theIndex);
942 ResultPartPtr aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aObj);
943 if (!aPart.get()) { // Probably this is Feature
944 FeaturePtr aPartFeature = std::dynamic_pointer_cast<ModelAPI_Feature>(aObj);
945 if (aPartFeature.get() && (aPartFeature->getKind() == PartSetPlugin_Part::ID())) {
946 aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aPartFeature->firstResult());
949 if (aPart.get()) { // if this is a part
950 if (aPart->partDoc() == aMgr->activeDocument()) {
951 aMgr->setActiveDocument(aMgr->moduleDocument());
959 void PartSet_Module::onViewCreated(ModuleBase_IViewWindow*)
961 // z layer is created for all started operations in order to visualize operation AIS presentation
963 Handle(V3d_Viewer) aViewer = myWorkshop->viewer()->AISContext()->CurrentViewer();
964 if (myVisualLayerId == 0) {
965 if (myVisualLayerId == 0)
966 aViewer->AddZLayer(myVisualLayerId);
968 TColStd_SequenceOfInteger aZList;
969 aViewer->GetAllZLayers(aZList);
971 for (int i = 1; i <= aZList.Length(); i++) {
972 if (aZList(i) == myVisualLayerId) {
978 aViewer->AddZLayer(myVisualLayerId);