src/PartSet/PartSet_Module.cpp

   1 // Copyright (C) 2014-20xx CEA/DEN, EDF R&D
   2
   3 #include "PartSet_Module.h"
   4 #include "PartSet_WidgetSketchLabel.h"
   5 #include "PartSet_Validators.h"
   6 #include "PartSet_Tools.h"
   7 #include "PartSet_PreviewPlanes.h"
   8 #include "PartSet_WidgetPoint2d.h"
   9 #include "PartSet_WidgetPoint2dDistance.h"
  10 #include "PartSet_WidgetPoint2DFlyout.h"
  11 #include "PartSet_WidgetShapeSelector.h"
  12 #include "PartSet_WidgetMultiSelector.h"
  13 #include "PartSet_WidgetEditor.h"
  14 #include "PartSet_WidgetFileSelector.h"
  15 #include "PartSet_WidgetSketchCreator.h"
  16 #include "PartSet_SketcherMgr.h"
  17 #include "PartSet_SketcherReetntrantMgr.h"
  18 #include "PartSet_ResultSketchPrs.h"
  19 #include "PartSet_MenuMgr.h"
  20 #include "PartSet_CustomPrs.h"
  21 #include "PartSet_IconFactory.h"
  22 #include "PartSet_WidgetChoice.h"
  23 #include "PartSet_OverconstraintListener.h"
  24
  25 #include "PartSet_Filters.h"
  26 #include "PartSet_FilterInfinite.h"
  27
  28 #include <PartSetPlugin_Remove.h>
  29 #include <PartSetPlugin_Part.h>
  30 #include <PartSetPlugin_Duplicate.h>
  31
  32 #include <ModuleBase_Operation.h>
  33 #include <ModuleBase_OperationAction.h>
  34 #include <ModuleBase_IViewer.h>
  35 #include <ModuleBase_IViewWindow.h>
  36 #include <ModuleBase_IPropertyPanel.h>
  37 #include <ModuleBase_WidgetEditor.h>
  38 #include <ModuleBase_WidgetValidated.h>
  39 #include <ModuleBase_FilterFactory.h>
  40 #include <ModuleBase_Tools.h>
  41 #include <ModuleBase_OperationFeature.h>
  42 #include <ModuleBase_WidgetFactory.h>
  43 #include <ModuleBase_OperationDescription.h>
  44 #include <ModuleBase_ViewerPrs.h>
  45
  46 #include <ModelAPI_Object.h>
  47 #include <ModelAPI_Events.h>
  48 #include <ModelAPI_Validator.h>
  49 #include <ModelAPI_Data.h>
  50 #include <ModelAPI_Session.h>
  51 #include <ModelAPI_ResultBody.h>
  52 #include <ModelAPI_AttributeString.h>
  53 #include <ModelAPI_AttributeSelectionList.h>
  54
  55 #include <GeomDataAPI_Point2D.h>
  56 #include <GeomDataAPI_Point.h>
  57 #include <GeomDataAPI_Dir.h>
  58
  59 #include <XGUI_Displayer.h>
  60 #include <XGUI_Workshop.h>
  61 #include <XGUI_OperationMgr.h>
  62 #include <XGUI_PropertyPanel.h>
  63 #include <XGUI_ModuleConnector.h>
  64 #include <XGUI_ContextMenuMgr.h>
  65 #include <XGUI_Tools.h>
  66 #include <XGUI_ObjectsBrowser.h>
  67 #include <XGUI_SelectionMgr.h>
  68 #include <XGUI_DataModel.h>
  69 #include <XGUI_ErrorMgr.h>
  70 #include <XGUI_CustomPrs.h>
  71 #include <XGUI_SelectionMgr.h>
  72
  73 #include <SketchPlugin_Feature.h>
  74 #include <SketchPlugin_Sketch.h>
  75 #include <SketchPlugin_ConstraintAngle.h>
  76 #include <SketchPlugin_ConstraintLength.h>
  77 #include <SketchPlugin_ConstraintDistance.h>
  78 #include <SketchPlugin_ConstraintParallel.h>
  79 #include <SketchPlugin_ConstraintPerpendicular.h>
  80 #include <SketchPlugin_ConstraintRadius.h>
  81
  82 #include <SketcherPrs_SymbolPrs.h>
  83 #include <SketcherPrs_Tools.h>
  84
  85 #include <Events_Loop.h>
  86 #include <Config_PropManager.h>
  87 #include <Config_Keywords.h>
  88
  89 #include <StdSelect_TypeOfFace.hxx>
  90 #include <TopoDS_Vertex.hxx>
  91 #include <TopoDS.hxx>
  92 #include <TopoDS_Shape.hxx>
  93 #include <BRep_Tool.hxx>
  94 #include <AIS_Dimension.hxx>
  95
  96 #include <QObject>
  97 #include <QMouseEvent>
  98 #include <QString>
  99 #include <QTimer>
 100 #include <QApplication>
 101 #include <QMessageBox>
 102 #include <QMainWindow>
 103 #include <QLineEdit>
 104 #include <QString>
 105
 106 #include <GeomAlgoAPI_FaceBuilder.h>
 107 #include <GeomDataAPI_Dir.h>
 108
 109 #include <SelectMgr_ListIteratorOfListOfFilter.hxx>
 110
 111 #ifdef _DEBUG
 112 #include <QDebug>
 113 #endif
 114
 115 /*!Create and return new instance of XGUI_Module*/
 116 extern "C" PARTSET_EXPORT ModuleBase_IModule* createModule(ModuleBase_IWorkshop* theWshop)
 117 {
 118   return new PartSet_Module(theWshop);
 119 }
 120
 121 PartSet_Module::PartSet_Module(ModuleBase_IWorkshop* theWshop)
 122 : ModuleBase_IModule(theWshop),
 123   myVisualLayerId(0)
 124 {
 125   new PartSet_IconFactory();
 126
 127   mySketchMgr = new PartSet_SketcherMgr(this);
 128   mySketchReentrantMgr = new PartSet_SketcherReetntrantMgr(theWshop);
 129
 130   XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(theWshop);
 131   XGUI_Workshop* aWorkshop = aConnector->workshop();
 132
 133   ModuleBase_IViewer* aViewer = theWshop->viewer();
 134   connect(aViewer, SIGNAL(keyRelease(ModuleBase_IViewWindow*, QKeyEvent*)),
 135           this, SLOT(onKeyRelease(ModuleBase_IViewWindow*, QKeyEvent*)));
 136   connect(aViewer, SIGNAL(viewTransformed(int)),
 137           SLOT(onViewTransformed(int)));
 138   connect(aViewer, SIGNAL(viewCreated(ModuleBase_IViewWindow*)),
 139           SLOT(onViewCreated(ModuleBase_IViewWindow*)));
 140   myMenuMgr = new PartSet_MenuMgr(this);
 141   myCustomPrs = new PartSet_CustomPrs(theWshop);
 142
 143   myOverconstraintListener = new PartSet_OverconstraintListener(theWshop);
 144
 145   Events_Loop* aLoop = Events_Loop::loop();
 146   aLoop->registerListener(this, Events_Loop::eventByName(EVENT_DOCUMENT_CHANGED));
 147
 148   mySelectionFilters.Append(new PartSet_GlobalFilter(myWorkshop));
 149   mySelectionFilters.Append(new PartSet_FilterInfinite(myWorkshop));
 150
 151   setDefaultConstraintShown();
 152
 153   Config_PropManager::registerProp("Visualization", "operation_parameter_color",
 154                           "Reference shape wireframe color in operation", Config_Prop::Color,
 155                           PartSet_CustomPrs::OPERATION_PARAMETER_COLOR());
 156   Config_PropManager::registerProp("Visualization", "operation_result_color",
 157                           "Result shape wireframe color in operation", Config_Prop::Color,
 158                           PartSet_CustomPrs::OPERATION_RESULT_COLOR());
 159   Config_PropManager::registerProp("Visualization", "operation_highlight_color",
 160                           "Multi selector item color in operation", Config_Prop::Color,
 161                           PartSet_CustomPrs::OPERATION_HIGHLIGHT_COLOR());
 162 }
 163
 164 PartSet_Module::~PartSet_Module()
 165 {
 166   SelectMgr_ListIteratorOfListOfFilter aIt(mySelectionFilters);
 167   for (; aIt.More(); aIt.Next()) {
 168     Handle(SelectMgr_Filter) aFilter = aIt.Value();
 169     if (!aFilter.IsNull())
 170       aFilter.Nullify();
 171   }
 172   delete myCustomPrs;
 173   delete myOverconstraintListener;
 174 }
 175
 176 void PartSet_Module::activateSelectionFilters()
 177 {
 178   SelectMgr_ListIteratorOfListOfFilter aIt(mySelectionFilters);
 179   for (; aIt.More(); aIt.Next()) {
 180     Handle(SelectMgr_Filter) aFilter = aIt.Value();
 181     if (!aFilter.IsNull())
 182       myWorkshop->viewer()->addSelectionFilter(aFilter);
 183   }
 184 }
 185
 186 void PartSet_Module::deactivateSelectionFilters()
 187 {
 188   SelectMgr_ListIteratorOfListOfFilter aIt(mySelectionFilters);
 189   for (; aIt.More(); aIt.Next()) {
 190     Handle(SelectMgr_Filter) aFilter = aIt.Value();
 191     if (!aFilter.IsNull())
 192       myWorkshop->viewer()->removeSelectionFilter(aFilter);
 193   }
 194 }
 195
 196 void PartSet_Module::storeSelection()
 197 {
 198   sketchMgr()->storeSelection();
 199 }
 200
 201 void PartSet_Module::restoreSelection()
 202 {
 203   sketchMgr()->restoreSelection();
 204 }
 205
 206 void PartSet_Module::registerValidators()
 207 {
 208   //Registering of validators
 209   SessionPtr aMgr = ModelAPI_Session::get();
 210   ModelAPI_ValidatorsFactory* aFactory = aMgr->validators();
 211   aFactory->registerValidator("PartSet_DistanceSelection", new PartSet_DistanceSelection);
 212   aFactory->registerValidator("PartSet_LengthSelection", new PartSet_LengthSelection);
 213   aFactory->registerValidator("PartSet_PerpendicularSelection", new PartSet_PerpendicularSelection);
 214   aFactory->registerValidator("PartSet_ParallelSelection", new PartSet_ParallelSelection);
 215   aFactory->registerValidator("PartSet_RadiusSelection", new PartSet_RadiusSelection);
 216   aFactory->registerValidator("PartSet_RigidSelection", new PartSet_RigidSelection);
 217   aFactory->registerValidator("PartSet_CoincidentSelection", new PartSet_CoincidentSelection);
 218   aFactory->registerValidator("PartSet_HVDirSelection", new PartSet_HVDirSelection);
 219   aFactory->registerValidator("PartSet_TangentSelection", new PartSet_TangentSelection);
 220   aFactory->registerValidator("PartSet_FilletSelection", new PartSet_FilletSelection);
 221   aFactory->registerValidator("PartSet_AngleSelection", new PartSet_AngleSelection);
 222   aFactory->registerValidator("PartSet_EqualSelection", new PartSet_EqualSelection);
 223   aFactory->registerValidator("PartSet_CollinearSelection", new PartSet_CollinearSelection);
 224   aFactory->registerValidator("PartSet_MiddlePointSelection", new PartSet_MiddlePointSelection);
 225   aFactory->registerValidator("PartSet_DifferentObjects", new PartSet_DifferentObjectsValidator);
 226   aFactory->registerValidator("PartSet_CoincidentAttr", new PartSet_CoincidentAttr);
 227 }
 228
 229 void PartSet_Module::registerFilters()
 230 {
 231   //Registering of selection filters
 232   XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
 233   ModuleBase_FilterFactory* aFactory = aConnector->selectionFilters();
 234 }
 235
 236 void PartSet_Module::registerProperties()
 237 {
 238   Config_PropManager::registerProp("Sketch planes", "planes_size", "Size", Config_Prop::Double,
 239                                    PLANE_SIZE);
 240   Config_PropManager::registerProp("Sketch planes", "planes_thickness", "Thickness",
 241                                    Config_Prop::Integer, SKETCH_WIDTH);
 242   Config_PropManager::registerProp("Sketch planes", "rotate_to_plane", "Rotate to plane when selected",
 243     Config_Prop::Boolean, "false");
 244 }
 245
 246 void PartSet_Module::connectToPropertyPanel(ModuleBase_ModelWidget* theWidget, const bool isToConnect)
 247 {
 248   mySketchMgr->connectToPropertyPanel(theWidget, isToConnect);
 249 }
 250
 251 void PartSet_Module::operationCommitted(ModuleBase_Operation* theOperation)
 252 {
 253   if (PartSet_SketcherMgr::isNestedSketchOperation(theOperation)) {
 254     mySketchMgr->commitNestedSketch(theOperation);
 255   }
 256
 257   /// Restart sketcher operations automatically
 258   if (!mySketchReentrantMgr->operationCommitted(theOperation)) {
 259
 260     ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>(theOperation);
 261     if (aFOperation && !aFOperation->isEditOperation()) {
 262       // the selection is cleared after commit the create operation
 263       // in order to do not use the same selected objects in the restarted operation
 264       // for common behaviour, the selection is cleared even if the operation is not restarted
 265       getWorkshop()->selector()->clearSelection();
 266     }
 267   }
 268 }
 269
 270 void PartSet_Module::operationAborted(ModuleBase_Operation* theOperation)
 271 {
 272   /// Restart sketcher operations automatically
 273   mySketchReentrantMgr->operationAborted(theOperation);
 274 }
 275
 276 void PartSet_Module::operationStarted(ModuleBase_Operation* theOperation)
 277 {
 278   ModuleBase_IWorkshop* anIWorkshop = workshop();
 279   if (!theOperation->getDescription()->hasXmlRepresentation()) {  //!< No need for property panel
 280     anIWorkshop->updateCommandStatus();
 281   }
 282   else {
 283     ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>
 284                                                                                  (theOperation);
 285     if (aFOperation) {
 286       XGUI_Workshop* aWorkshop = XGUI_Tools::workshop(anIWorkshop);
 287       XGUI_PropertyPanel* aPropertyPanel = aWorkshop->propertyPanel();
 288       ModuleBase_ModelWidget* aFilledWidget = 0;
 289       bool aPostonedWidgetActivation = false;
 290       FeaturePtr aFeature = aFOperation->feature();
 291
 292       std::string aGreedAttributeId = ModuleBase_Tools::findGreedAttribute(anIWorkshop, aFeature);
 293       // if there is a greed attribute, automatic commit by preselection for this feature is prohibited
 294       aWorkshop->setPropertyPanel(aFOperation);
 295
 296       // filling the operation values by the current selection
 297       // if the operation can be committed after the controls filling, the method perform should
 298       // be stopped. Otherwise unnecessary presentations can be shown(e.g. operation prs in sketch)
 299       bool isOperationCommitted = false;
 300       if (!aFOperation->isEditOperation()) {
 301         aFilledWidget = aFOperation->activateByPreselection(aGreedAttributeId);
 302         if (currentOperation() != aFOperation)
 303           isOperationCommitted = true;
 304         else {
 305           if (aGreedAttributeId.empty()) {
 306             // a signal should be emitted before the next widget activation
 307             // because, the activation of the next widget will give a focus to the widget. As a result
 308             // the value of the widget is initialized. And commit may happens until the value is entered.
 309             if (aFilledWidget) {
 310               if (mySketchReentrantMgr->canBeCommittedByPreselection())
 311                 isOperationCommitted = mySketchMgr->operationActivatedByPreselection();
 312               // activate the next obligatory widget
 313               if (!isOperationCommitted)
 314                 aPropertyPanel->activateNextWidget(aFilledWidget);
 315             }
 316           }
 317           else { // there is a greed widget
 318             const QList<ModuleBase_ModelWidget*>& aWidgets = aPropertyPanel->modelWidgets();
 319             std::string aFirstAttributeId = aWidgets.front()->attributeID();
 320             // activate next widget after greeded if it is the first widget in the panel
 321             // else the first panel widget is already activated by operation start
 322             if (aFirstAttributeId == aGreedAttributeId)
 323               aPostonedWidgetActivation = true;
 324           }
 325         }
 326       } if (!isOperationCommitted) {
 327         anIWorkshop->updateCommandStatus();
 328         aWorkshop->connectToPropertyPanel(true);
 329         operationStartedInternal(aFOperation);
 330
 331         // the objects of the current operation should be deactivated
 332         QObjectPtrList anObjects;
 333         anObjects.append(aFeature);
 334         std::list<ResultPtr> aResults = aFeature->results();
 335         std::list<ResultPtr>::const_iterator aIt;
 336         for (aIt = aResults.begin(); aIt != aResults.end(); ++aIt) {
 337           anObjects.append(*aIt);
 338         }
 339         QObjectPtrList::const_iterator anIt = anObjects.begin(), aLast = anObjects.end();
 340         for (; anIt != aLast; anIt++)
 341           aWorkshop->deactivateActiveObject(*anIt, false);
 342         if (anObjects.size() > 0) {
 343           XGUI_Displayer* aDisplayer = aWorkshop->displayer();
 344           aDisplayer->updateViewer();
 345         }
 346       }
 347       if (aPostonedWidgetActivation) {
 348         // if the widget is an empty in the chain of activated widgets, the current operation
 349         // is restarted. It should be performed after functionality of the operation starting
 350         aPropertyPanel->activateNextWidget(aFilledWidget);
 351       }
 352     }
 353   }
 354 }
 355
 356 void PartSet_Module::operationStartedInternal(ModuleBase_Operation* theOperation)
 357 {
 358   /// Restart sketcher operations automatically
 359   mySketchReentrantMgr->operationStarted(theOperation);
 360
 361   if (PartSet_SketcherMgr::isSketchOperation(theOperation)) {
 362     mySketchMgr->startSketch(theOperation);
 363   }
 364   else if (PartSet_SketcherMgr::isNestedSketchOperation(theOperation)) {
 365     mySketchMgr->startNestedSketch(theOperation);
 366   }
 367
 368   ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>(theOperation);
 369   if (aFOperation) {
 370     myCustomPrs->activate(aFOperation->feature(), ModuleBase_IModule::CustomizeArguments, true);
 371     myCustomPrs->activate(aFOperation->feature(), ModuleBase_IModule::CustomizeResults, true);
 372   }
 373 }
 374
 375 void PartSet_Module::operationResumed(ModuleBase_Operation* theOperation)
 376 {
 377   ModuleBase_IModule::operationResumed(theOperation);
 378
 379   ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>(theOperation);
 380   if (aFOperation) {
 381     myCustomPrs->activate(aFOperation->feature(), ModuleBase_IModule::CustomizeArguments, true);
 382     myCustomPrs->activate(aFOperation->feature(), ModuleBase_IModule::CustomizeResults, true);
 383   }
 384 }
 385
 386 void PartSet_Module::operationStopped(ModuleBase_Operation* theOperation)
 387 {
 388   bool isModifiedArgs = myCustomPrs->deactivate(ModuleBase_IModule::CustomizeArguments, false);
 389   bool isModifiedResults = myCustomPrs->deactivate(ModuleBase_IModule::CustomizeResults, false);
 390   bool isModified = isModifiedArgs || isModifiedResults;
 391
 392   if (PartSet_SketcherMgr::isNestedSketchOperation(theOperation)) {
 393     mySketchMgr->stopNestedSketch(theOperation);
 394   }
 395   else if (PartSet_SketcherMgr::isSketchOperation(theOperation))
 396     setDefaultConstraintShown();
 397
 398   //VSV: Viewer is updated on feature update and redisplay
 399   if (isModified) {
 400     XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(myWorkshop);
 401     XGUI_Displayer* aDisplayer = aConnector->workshop()->displayer();
 402     aDisplayer->updateViewer();
 403   }
 404
 405   QMap<PartSet_Tools::ConstraintVisibleState, bool>::const_iterator anIt = myHasConstraintShown.begin(),
 406                                                                     aLast = myHasConstraintShown.end();
 407   for (; anIt != aLast; anIt++) {
 408     mySketchMgr->updateBySketchParameters(anIt.key(), anIt.value());
 409   }
 410 }
 411
 412 ModuleBase_Operation* PartSet_Module::currentOperation() const
 413 {
 414   XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
 415   XGUI_OperationMgr* anOpMgr = aConnector->workshop()->operationMgr();
 416   return anOpMgr->currentOperation();
 417 }
 418
 419 bool PartSet_Module::canUndo() const
 420 {
 421   bool aCanUndo = false;
 422   SessionPtr aMgr = ModelAPI_Session::get();
 423   if (aMgr->hasModuleDocument() && aMgr->canUndo()) {
 424     aCanUndo = !aMgr->isOperation();
 425     if (!aCanUndo) // check the enable state additionally by sketch manager
 426       aCanUndo = aMgr->canUndo();
 427   }
 428   return aCanUndo;
 429 }
 430
 431 bool PartSet_Module::canRedo() const
 432 {
 433   bool aCanRedo = false;
 434   SessionPtr aMgr = ModelAPI_Session::get();
 435   if (aMgr->hasModuleDocument() && aMgr->canRedo()) {
 436     aCanRedo = !aMgr->isOperation();
 437     if (!aCanRedo) // check the enable state additionally by sketch manager
 438       aCanRedo = aMgr->canRedo();
 439   }
 440   return aCanRedo;
 441 }
 442
 443 bool PartSet_Module::canApplyAction(const ObjectPtr& theObject, const QString& theActionId) const
 444 {
 445   bool aValid = true;
 446   if (theActionId == "MOVE_CMD") {
 447     FeaturePtr aFeature = ModelAPI_Feature::feature(theObject);
 448     if (aFeature) {
 449       // part features can not be moved in the history.
 450       if (aFeature->getKind() == PartSetPlugin_Part::ID())
 451         aValid = false;
 452     }
 453   }
 454   return aValid;
 455 }
 456
 457 bool PartSet_Module::canEraseObject(const ObjectPtr& theObject) const
 458 {
 459   // the sketch manager put the restriction to the objects erase
 460   return mySketchMgr->canEraseObject(theObject);
 461 }
 462
 463 bool PartSet_Module::canDisplayObject(const ObjectPtr& theObject) const
 464 {
 465   // the sketch manager put the restriction to the objects display
 466   return mySketchMgr->canDisplayObject(theObject);
 467 }
 468
 469 /*void PartSet_Module::processHiddenObject(const std::list<ObjectPtr>& theObjects)
 470 {
 471   mySketchMgr->processHiddenObject(theObjects);
 472 }*/
 473
 474 bool PartSet_Module::canActivateSelection(const ObjectPtr& theObject) const
 475 {
 476   bool aCanActivate = ModuleBase_IModule::canActivateSelection(theObject);
 477
 478   ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
 479   bool isSketchOp = PartSet_SketcherMgr::isSketchOperation(anOperation),
 480        isNestedOp = PartSet_SketcherMgr::isNestedSketchOperation(anOperation);
 481   if (isSketchOp || isNestedOp) {
 482     // in active sketch operation it is possible to activate operation object in selection
 483     // in the edit operation, e.g. points of the line can be moved when the line is edited
 484     ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>(anOperation);
 485     aCanActivate = aCanActivate || (aFOperation && aFOperation->isEditOperation());
 486   }
 487   return aCanActivate;
 488 }
 489
 490 bool PartSet_Module::addViewerMenu(const QMap<QString, QAction*>& theStdActions,
 491                                    QWidget* theParent,
 492                                    QMap<int, QAction*>& theMenuActions) const
 493 {
 494   return myMenuMgr->addViewerMenu(theStdActions, theParent, theMenuActions);
 495 }
 496
 497 void PartSet_Module::updateViewerMenu(const QMap<QString, QAction*>& theStdActions)
 498 {
 499   myMenuMgr->updateViewerMenu(theStdActions);
 500 }
 501
 502 QString PartSet_Module::getFeatureError(const FeaturePtr& theFeature)
 503 {
 504   QString anError = ModuleBase_IModule::getFeatureError(theFeature);
 505   if (anError.isEmpty())
 506     anError = sketchMgr()->getFeatureError(theFeature);
 507
 508   return anError;
 509 }
 510
 511 void PartSet_Module::grantedOperationIds(ModuleBase_Operation* theOperation,
 512                                          QStringList& theIds) const
 513 {
 514   myMenuMgr->grantedOperationIds(theOperation, theIds);
 515
 516   if (PartSet_SketcherMgr::isSketchOperation(theOperation)) {
 517     XGUI_Workshop* aWorkshop = getWorkshop();
 518     theIds.append(aWorkshop->contextMenuMgr()->action("DELETE_CMD")->text());
 519   }
 520 }
 521
 522 void PartSet_Module::activeSelectionModes(QIntList& theModes)
 523 {
 524   theModes.clear();
 525   if (mySketchMgr->activeSketch().get())
 526     PartSet_SketcherMgr::sketchSelectionModes(theModes);
 527 }
 528
 529 bool PartSet_Module::isMouseOverWindow()
 530 {
 531   return mySketchMgr->isMouseOverWindow();
 532 }
 533
 534 void PartSet_Module::closeDocument()
 535 {
 536   clearViewer();
 537 }
 538
 539 void PartSet_Module::clearViewer()
 540 {
 541   myCustomPrs->clearPrs();
 542
 543   XGUI_Workshop* aWorkshop = getWorkshop();
 544   XGUI_Displayer* aDisplayer = aWorkshop->displayer();
 545   aDisplayer->deactivateSelectionFilters();
 546 }
 547
 548 void PartSet_Module::propertyPanelDefined(ModuleBase_Operation* theOperation)
 549 {
 550   ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>(theOperation);
 551   if (!aFOperation)
 552     return;
 553
 554   ModuleBase_IPropertyPanel* aPanel = aFOperation->propertyPanel();
 555   // we have to manually activate the sketch label in edit mode
 556   if (PartSet_SketcherMgr::isSketchOperation(aFOperation) &&  (aFOperation->isEditOperation()))
 557     aPanel->activateWidget(aPanel->modelWidgets().first());
 558 }
 559
 560 bool PartSet_Module::createWidgets(ModuleBase_Operation* theOperation,
 561                                    QList<ModuleBase_ModelWidget*>& theWidgets) const
 562 {
 563   bool aProcessed = false;
 564
 565   ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>(theOperation);
 566   XGUI_Workshop* aWorkshop = getWorkshop();
 567   XGUI_PropertyPanel* aPropertyPanel = aWorkshop->propertyPanel();
 568   if (mySketchMgr->activeSketch().get() && aFOperation && aPropertyPanel) {
 569     ModuleBase_ISelection* aSelection = workshop()->selection();
 570     // click on a point in sketch leads here with the point is highlighted, not yet selected
 571     QList<ModuleBase_ViewerPrsPtr> aPreselection = aSelection->getHighlighted();
 572     if (aPreselection.size() == 1) {
 573       ModuleBase_ViewerPrsPtr aSelectedPrs = aPreselection[0];
 574       ObjectPtr anObject = aSelectedPrs->object();
 575
 576       FeaturePtr aFeature = ModelAPI_Feature::feature(anObject);
 577       FeaturePtr anOpFeature = aFOperation->feature();
 578       GeomShapePtr aShape = aSelectedPrs->shape();
 579       // click on the digit of dimension constrain comes here with an empty shape, so we need the check
 580       if (aFeature == anOpFeature && aShape.get() && !aShape->isNull()) {
 581         const TopoDS_Shape& aTDShape = aShape->impl<TopoDS_Shape>();
 582         AttributePtr anAttribute = PartSet_Tools::findAttributeBy2dPoint(anObject, aTDShape,
 583                                                                          mySketchMgr->activeSketch());
 584         if (anAttribute.get()) {
 585           QString aXmlRepr = aFOperation->getDescription()->xmlRepresentation();
 586           ModuleBase_WidgetFactory aFactory(aXmlRepr.toStdString(), workshop());
 587
 588           const std::string anAttributeId = anAttribute->id();
 589           aFactory.createWidget(aPropertyPanel->contentWidget(), anAttributeId);
 590
 591           theWidgets = aFactory.getModelWidgets();
 592           // it is possible that the point does not present in XML definition,
 593           // in this case, we assume that it is not processed by this module
 594           // e.g. "Intersection point" feature
 595           aProcessed = !theWidgets.isEmpty();
 596         }
 597       }
 598     }
 599   }
 600   return aProcessed;
 601 }
 602
 603 void PartSet_Module::onSelectionChanged()
 604 {
 605   ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
 606   if (!aOperation)
 607     return;
 608
 609   bool isSketcherOp = false;
 610   // An edit operation is enable only if the current opeation is the sketch operation
 611   if (mySketchMgr->activeSketch()) {
 612     if (PartSet_Tools::sketchPlane(mySketchMgr->activeSketch()))
 613       isSketcherOp = PartSet_SketcherMgr::isSketchOperation(aOperation);
 614   }
 615   if (isSketcherOp) {
 616     // Editing of constraints can be done on selection
 617     ModuleBase_ISelection* aSelect = myWorkshop->selection();
 618     QList<ModuleBase_ViewerPrsPtr> aSelected = aSelect->getSelected();
 619     if (aSelected.size() == 1) {
 620       ModuleBase_ViewerPrsPtr aPrs = aSelected.first();
 621       ObjectPtr aObject = aPrs->object();
 622       FeaturePtr aFeature = ModelAPI_Feature::feature(aObject);
 623       if (aFeature) {
 624         std::string aId = aFeature->getKind();
 625         if ((aId == SketchPlugin_ConstraintRadius::ID()) ||
 626             (aId == SketchPlugin_ConstraintLength::ID()) ||
 627             (aId == SketchPlugin_ConstraintDistance::ID()) ||
 628             (aId == SketchPlugin_ConstraintAngle::ID())) {
 629           editFeature(aFeature);
 630         }
 631       }
 632     }
 633   }
 634 }
 635
 636 void PartSet_Module::onKeyRelease(ModuleBase_IViewWindow* theWnd, QKeyEvent* theEvent)
 637 {
 638   XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
 639   XGUI_OperationMgr* anOpMgr = aConnector->workshop()->operationMgr();
 640   anOpMgr->onKeyReleased(theWnd->viewPort(), theEvent);
 641 }
 642
 643 ModuleBase_ModelWidget* PartSet_Module::createWidgetByType(const std::string& theType,
 644                                                            QWidget* theParent,
 645                                                            Config_WidgetAPI* theWidgetApi)
 646 {
 647   ModuleBase_IWorkshop* aWorkshop = workshop();
 648   XGUI_Workshop* aXUIWorkshop = getWorkshop();
 649   ModuleBase_ModelWidget* aWgt = NULL;
 650   if (theType == "sketch-start-label") {
 651     PartSet_WidgetSketchLabel* aLabelWgt = new PartSet_WidgetSketchLabel(theParent, aWorkshop,
 652                                                                theWidgetApi, myHasConstraintShown);
 653     connect(aLabelWgt, SIGNAL(planeSelected(const std::shared_ptr<GeomAPI_Pln>&)),
 654       mySketchMgr, SLOT(onPlaneSelected(const std::shared_ptr<GeomAPI_Pln>&)));
 655     connect(aLabelWgt, SIGNAL(showConstraintToggled(int, bool)),
 656       mySketchMgr, SLOT(onShowConstraintsToggle(int, bool)));
 657     aWgt = aLabelWgt;
 658   } else if (theType == "sketch-2dpoint_selector") {
 659     PartSet_WidgetPoint2D* aPointWgt = new PartSet_WidgetPoint2D(theParent, aWorkshop,
 660                                                                  theWidgetApi);
 661     aPointWgt->setSketch(mySketchMgr->activeSketch());
 662     connect(aPointWgt, SIGNAL(vertexSelected()), sketchReentranceMgr(), SLOT(onVertexSelected()));
 663     aWgt = aPointWgt;
 664   }else if (theType == "sketch-2dpoint_flyout_selector") {
 665     PartSet_WidgetPoint2DFlyout* aPointWgt = new PartSet_WidgetPoint2DFlyout(theParent, aWorkshop,
 666                                                                              theWidgetApi);
 667     aPointWgt->setSketch(mySketchMgr->activeSketch());
 668     connect(aPointWgt, SIGNAL(vertexSelected()), sketchReentranceMgr(), SLOT(onVertexSelected()));
 669     aWgt = aPointWgt;
 670   } else if (theType == "point2ddistance") {
 671     PartSet_WidgetPoint2dDistance* aDistanceWgt = new PartSet_WidgetPoint2dDistance(theParent,
 672                                                                      aWorkshop, theWidgetApi);
 673     aDistanceWgt->setSketch(mySketchMgr->activeSketch());
 674     aWgt = aDistanceWgt;
 675   } else if (theType == "sketch_shape_selector") {
 676     PartSet_WidgetShapeSelector* aShapeSelectorWgt =
 677                           new PartSet_WidgetShapeSelector(theParent, aWorkshop, theWidgetApi);
 678     aShapeSelectorWgt->setSketcher(mySketchMgr->activeSketch());
 679     aWgt = aShapeSelectorWgt;
 680   } else if (theType == "sketch_multi_selector") {
 681     PartSet_WidgetMultiSelector* aShapeSelectorWgt =
 682                           new PartSet_WidgetMultiSelector(theParent, aWorkshop, theWidgetApi);
 683     aShapeSelectorWgt->setSketcher(mySketchMgr->activeSketch());
 684     aWgt = aShapeSelectorWgt;
 685   }
 686   else if (theType == WDG_DOUBLEVALUE_EDITOR) {
 687     aWgt = new PartSet_WidgetEditor(theParent, aWorkshop, theWidgetApi);
 688   } else if (theType == "export_file_selector") {
 689     aWgt = new PartSet_WidgetFileSelector(theParent, aWorkshop, theWidgetApi);
 690   } else if (theType == "sketch_launcher") {
 691     aWgt = new PartSet_WidgetSketchCreator(theParent, this, theWidgetApi);
 692   } else if (theType == "module_choice") {
 693     aWgt = new PartSet_WidgetChoice(theParent, theWidgetApi);
 694     connect(aWgt, SIGNAL(itemSelected(ModuleBase_ModelWidget*, int)),
 695             this, SLOT(onChoiceChanged(ModuleBase_ModelWidget*, int)));
 696   }
 697   return aWgt;
 698 }
 699
 700 ModuleBase_ModelWidget* PartSet_Module::activeWidget() const
 701 {
 702   ModuleBase_ModelWidget* anActiveWidget = 0;
 703
 704   anActiveWidget = mySketchReentrantMgr->internalActiveWidget();
 705   if (!anActiveWidget) {
 706     ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
 707     if (aOperation) {
 708       ModuleBase_IPropertyPanel* aPanel = aOperation->propertyPanel();
 709       anActiveWidget = aPanel->activeWidget();
 710     }
 711   }
 712   return anActiveWidget;
 713 }
 714
 715 bool PartSet_Module::deleteObjects()
 716 {
 717   bool isProcessed = false;
 718
 719   XGUI_Workshop* aWorkshop = getWorkshop();
 720   XGUI_OperationMgr* anOpMgr = aWorkshop->operationMgr();
 721
 722   //SessionPtr aMgr = ModelAPI_Session::get();
 723   // 1. check whether the delete should be processed in the module
 724   ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
 725   bool isSketchOp = PartSet_SketcherMgr::isSketchOperation(anOperation),
 726        isNestedOp = PartSet_SketcherMgr::isNestedSketchOperation(anOperation);
 727   if (isSketchOp || isNestedOp) {
 728     isProcessed = true;
 729     // 2. find selected presentations
 730     // selected objects should be collected before the current operation abort because
 731     // the abort leads to selection lost on constraint objects. It can be corrected after #386 issue
 732     ModuleBase_ISelection* aSel = workshop()->selection();
 733     QObjectPtrList aSelectedObj = aSel->selectedPresentations();
 734     // if there are no selected objects in the viewer, that means that the selection in another
 735     // place cased this method. It is necessary to return the false value to understande in above
 736     // method that delete is not processed
 737     if (aSelectedObj.count() == 0)
 738       return false;
 739
 740     // avoid delete of the objects, which are not belong to the current sketch
 741     // in order to do not delete results of other sketches
 742     QObjectPtrList aSketchObjects;
 743     QObjectPtrList::const_iterator anIt = aSelectedObj.begin(), aLast = aSelectedObj.end();
 744     for ( ; anIt != aLast; anIt++) {
 745       ObjectPtr anObject = *anIt;
 746       if (mySketchMgr->isObjectOfSketch(anObject)) {
 747         // sketch feature should be used in this list because workshop deletes features only
 748         // results are skipped
 749         FeaturePtr aSketchFeature = ModelAPI_Feature::feature(anObject);
 750         aSketchObjects.append(aSketchFeature);
 751       }
 752     }
 753     // if the selection contains only local selected presentations from other sketches,
 754     // the Delete operation should not be done at all
 755     if (aSketchObjects.size() == 0)
 756       return true;
 757
 758     // 3. start operation
 759     QString aDescription = aWorkshop->contextMenuMgr()->action("DELETE_CMD")->text();
 760     ModuleBase_OperationAction* anOpAction = new ModuleBase_OperationAction(aDescription, this);
 761
 762     // the active nested sketch operation should be aborted unconditionally
 763     // the Delete action should be additionally granted for the Sketch operation
 764     // in order to do not abort/commit it
 765     if (!anOpMgr->canStartOperation(anOpAction->id()))
 766       return true; // the objects are processed but can not be deleted
 767
 768     anOpMgr->startOperation(anOpAction);
 769
 770     // WORKAROUND, should be done to avoid viewer highlight update after deletetion of objects
 771     // the problem is in AIS Dimensions recompute if a line and the dim are removed, line is the first
 772     // it causes the AIS recompute, where the base line is null, the result is empty AIS in the viewer
 773     XGUI_Tools::workshop(myWorkshop)->selector()->clearSelection();
 774
 775     // 4. delete features
 776     // sketch feature should be skipped, only sub-features can be removed
 777     // when sketch operation is active
 778     aWorkshop->deleteFeatures(aSketchObjects);
 779     // 5. stop operation
 780     anOpMgr->commitOperation();
 781   }
 782   return isProcessed;
 783 }
 784
 785 void PartSet_Module::onFeatureTriggered()
 786 {
 787   QAction* aCmd = dynamic_cast<QAction*>(sender());
 788   if (aCmd->isCheckable() && aCmd->isChecked()) {
 789     // 1. check whether the delete should be processed in the module
 790     ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
 791     bool isNestedOp = PartSet_SketcherMgr::isNestedCreateOperation(anOperation);
 792     if (isNestedOp) {
 793       // in case if in the viewer nothing is displayed, the create operation should not be
 794       // comitted even if all values of the feature are initialized
 795       if (!mySketchMgr->canDisplayCurrentCreatedFeature()) {
 796         // the action information should be saved before the operation is aborted
 797         // because this abort leads to update command status, which unchecks this action
 798         anOperation->abort();
 799         launchOperation(aCmd->data().toString());
 800       }
 801     }
 802   }
 803   ModuleBase_IModule::onFeatureTriggered();
 804 }
 805
 806 void PartSet_Module::editFeature(FeaturePtr theFeature)
 807 {
 808   storeConstraintsState(theFeature->getKind());
 809   ModuleBase_IModule::editFeature(theFeature);
 810 }
 811
 812 bool PartSet_Module::canCommitOperation() const
 813 {
 814   return true;
 815 }
 816
 817 void PartSet_Module::launchOperation(const QString& theCmdId)
 818 {
 819   storeConstraintsState(theCmdId.toStdString());
 820   ModuleBase_IModule::launchOperation(theCmdId);
 821 }
 822
 823 void PartSet_Module::storeConstraintsState(const std::string& theFeatureKind)
 824 {
 825   if (myWorkshop->currentOperation() &&
 826       myWorkshop->currentOperation()->id().toStdString() == SketchPlugin_Sketch::ID()) {
 827     const QMap<PartSet_Tools::ConstraintVisibleState, bool>& aShownStates =
 828                                                   mySketchMgr->showConstraintStates();
 829     myHasConstraintShown = aShownStates;
 830   }
 831   if (PartSet_SketcherMgr::constraintsIdList().contains(theFeatureKind.c_str())) {
 832     // Show constraints if a constraint was anOperation
 833     mySketchMgr->updateBySketchParameters(PartSet_Tools::Geometrical, true);
 834     mySketchMgr->updateBySketchParameters(PartSet_Tools::Dimensional, true);
 835     mySketchMgr->updateBySketchParameters(PartSet_Tools::Expressions,
 836                                           myHasConstraintShown[PartSet_Tools::Expressions]);
 837   }
 838 }
 839
 840 void PartSet_Module::onObjectDisplayed(ObjectPtr theObject, AISObjectPtr theAIS)
 841 {
 842   Handle(AIS_InteractiveObject) anAIS = theAIS->impl<Handle(AIS_InteractiveObject)>();
 843   if (!anAIS.IsNull()) {
 844     Handle(AIS_InteractiveContext) aCtx = anAIS->GetContext();
 845     Handle(AIS_Dimension) aDim = Handle(AIS_Dimension)::DownCast(anAIS);
 846     if (!aDim.IsNull()) {
 847       aCtx->SetZLayer(aDim, myVisualLayerId);
 848     } else {
 849       Handle(SketcherPrs_SymbolPrs) aCons = Handle(SketcherPrs_SymbolPrs)::DownCast(anAIS);
 850       if (!aCons.IsNull())
 851         aCtx->SetZLayer(aCons, myVisualLayerId);
 852     }
 853   }
 854 }
 855
 856 void PartSet_Module::onBeforeObjectErase(ObjectPtr theObject, AISObjectPtr theAIS)
 857 {
 858   // this is obsolete
 859   // it should be recomputed in order to disappear in the viewer if the corresponded object
 860   // is erased
 861   //if (myCustomPrs->isActive())
 862   //  myCustomPrs->redisplay(theObject, false);
 863 }
 864
 865 void PartSet_Module::onViewTransformed(int theTrsfType)
 866 {
 867   // Set length of arrows constant in pixel size
 868   // if the operation is panning or rotate or panglobal then do nothing
 869   if ((theTrsfType == 1) || (theTrsfType == 3) || (theTrsfType == 4))
 870     return;
 871   ModuleBase_IViewer* aViewer = myWorkshop->viewer();
 872   Handle(AIS_InteractiveContext) aContext = aViewer->AISContext();
 873   if (aContext.IsNull())
 874     return;
 875
 876   //Handle(V3d_View) aView = aViewer->activeView();
 877
 878   XGUI_Workshop* aWorkshop = getWorkshop();
 879   XGUI_Displayer* aDisplayer = aWorkshop->displayer();
 880   Handle(V3d_Viewer) aV3dViewer = aContext->CurrentViewer();
 881   Handle(V3d_View) aView;
 882   double aScale = 0;
 883   for (aV3dViewer->InitDefinedViews();
 884        aV3dViewer->MoreDefinedViews();
 885        aV3dViewer->NextDefinedViews()) {
 886     Handle(V3d_View) aV = aV3dViewer->DefinedView();
 887     double aS = aV->Scale();
 888     if (aS > aScale) {
 889       aScale = aS;
 890       aView = aV;
 891     }
 892   }
 893   if (aView.IsNull())
 894     return;
 895   double aLen = aView->Convert(SketcherPrs_Tools::getDefaultArrowSize());
 896
 897   double aPrevLen = SketcherPrs_Tools::getArrowSize();
 898   SketcherPrs_Tools::setArrowSize(aLen);
 899   const double aPrevScale = aViewer->Scale(aViewer->activeView());
 900   const double aCurScale = aViewer->activeView()->Camera()->Scale();
 901   aViewer->SetScale(aViewer->activeView(), aCurScale);
 902   SketcherPrs_Tools::setTextHeight (aCurScale / aPrevScale * SketcherPrs_Tools::getTextHeight());
 903   bool isModified = false;
 904   QList<AISObjectPtr> aPrsList = aDisplayer->displayedPresentations();
 905   foreach (AISObjectPtr aAIS, aPrsList) {
 906     Handle(AIS_InteractiveObject) aAisObj = aAIS->impl<Handle(AIS_InteractiveObject)>();
 907
 908     Handle(AIS_Dimension) aDim = Handle(AIS_Dimension)::DownCast(aAisObj);
 909     if (!aDim.IsNull()) {
 910       aDim->DimensionAspect()->ArrowAspect()->SetLength(aLen);
 911       aContext->Redisplay(aDim, false);
 912       isModified = true;
 913     }
 914   }
 915   if (isModified)
 916     aDisplayer->updateViewer();
 917 }
 918
 919 void PartSet_Module::activateCustomPrs(const FeaturePtr& theFeature, const ModuleBase_CustomizeFlag& theFlag,
 920                                        const bool theUpdateViewer)
 921 {
 922   myCustomPrs->activate(theFeature, theFlag, theUpdateViewer);
 923 }
 924
 925 void PartSet_Module::deactivateCustomPrs(const ModuleBase_CustomizeFlag& theFlag,
 926                                          const bool theUpdateViewer)
 927 {
 928   myCustomPrs->deactivate(theFlag, theUpdateViewer);
 929 }
 930
 931 bool PartSet_Module::customisePresentation(ResultPtr theResult, AISObjectPtr thePrs,
 932                                            std::shared_ptr<GeomAPI_ICustomPrs> theCustomPrs)
 933 {
 934   bool aCustomized = false;
 935
 936   if (theResult.get())
 937     return aCustomized;
 938
 939   XGUI_Workshop* aWorkshop = getWorkshop();
 940   XGUI_Displayer* aDisplayer = aWorkshop->displayer();
 941   ObjectPtr anObject = aDisplayer->getObject(thePrs);
 942   if (anObject.get()) {
 943     bool isConflicting = myOverconstraintListener->isConflictingObject(anObject);
 944     // customize sketch symbol presentation
 945     if (thePrs.get()) {
 946       Handle(AIS_InteractiveObject) anAISIO = thePrs->impl<Handle(AIS_InteractiveObject)>();
 947       if (!anAISIO.IsNull()) {
 948         if (!Handle(SketcherPrs_SymbolPrs)::DownCast(anAISIO).IsNull()) {
 949           Handle(SketcherPrs_SymbolPrs) aPrs = Handle(SketcherPrs_SymbolPrs)::DownCast(anAISIO);
 950           if (!aPrs.IsNull()) {
 951             std::vector<int> aColor;
 952             myOverconstraintListener->getConflictingColor(aColor);
 953             aPrs->SetConflictingConstraint(isConflicting, aColor);
 954             aCustomized = true;
 955           }
 956         }
 957       }
 958     }
 959     // customize sketch dimension constraint presentation
 960     if (!aCustomized) {
 961       std::vector<int> aColor;
 962       if (isConflicting) {
 963         myOverconstraintListener->getConflictingColor(aColor);
 964       }
 965       if (aColor.empty())
 966         XGUI_CustomPrs::getDefaultColor(anObject, true, aColor);
 967       if (!aColor.empty()) {
 968         aCustomized = thePrs->setColor(aColor[0], aColor[1], aColor[2]);
 969       }
 970     }
 971
 972     // customize dimentional constrains
 973     sketchMgr()->customizePresentation(anObject);
 974   }
 975
 976   return aCustomized;
 977 }
 978
 979 bool PartSet_Module::customizeObject(ObjectPtr theObject, const ModuleBase_CustomizeFlag& theFlag,
 980                                      const bool theUpdateViewer)
 981 {
 982   bool isRedisplayed = false;
 983   if (myCustomPrs->isActive(theFlag))
 984     isRedisplayed = myCustomPrs->redisplay(theObject, theFlag, theUpdateViewer);
 985
 986   return isRedisplayed;
 987 }
 988
 989 void PartSet_Module::customizeObjectBrowser(QWidget* theObjectBrowser)
 990 {
 991   XGUI_ObjectsBrowser* aOB = dynamic_cast<XGUI_ObjectsBrowser*>(theObjectBrowser);
 992   if (aOB) {
 993     QLabel* aLabel = aOB->activeDocLabel();
 994     aLabel->installEventFilter(myMenuMgr);
 995     connect(aLabel, SIGNAL(customContextMenuRequested(const QPoint&)),
 996           SLOT(onActiveDocPopup(const QPoint&)));
 997     //QPalette aPalet = aLabel->palette();
 998     //aPalet.setColor(QPalette::Text, QColor(0, 72, 140));
 999     //aLabel->setPalette(aPalet);
1000     aOB->treeView()->setExpandsOnDoubleClick(false);
1001     connect(aOB->treeView(), SIGNAL(doubleClicked(const QModelIndex&)),
1002       SLOT(onTreeViewDoubleClick(const QModelIndex&)));
1003   }
1004 }
1005
1006 void PartSet_Module::onActiveDocPopup(const QPoint& thePnt)
1007 {
1008   SessionPtr aMgr = ModelAPI_Session::get();
1009   QAction* aActivatePartAction = myMenuMgr->action("ACTIVATE_PARTSET_CMD");
1010
1011   XGUI_Workshop* aWorkshop = getWorkshop();
1012   QLabel* aHeader = aWorkshop->objectBrowser()->activeDocLabel();
1013
1014   aActivatePartAction->setEnabled((aMgr->activeDocument() != aMgr->moduleDocument()));
1015
1016   QMenu aMenu;
1017   aMenu.addAction(aActivatePartAction);
1018   aMenu.exec(aHeader->mapToGlobal(thePnt));
1019 }
1020
1021 Handle(AIS_InteractiveObject) PartSet_Module::createPresentation(const ResultPtr& theResult)
1022 {
1023   return mySketchMgr->createPresentation(theResult);
1024 }
1025
1026
1027 ObjectPtr PartSet_Module::findPresentedObject(const AISObjectPtr& theAIS) const
1028 {
1029   ObjectPtr anObject;
1030   ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
1031   if (aOperation) {
1032     /// If last line finished on vertex the lines creation sequence has to be break
1033     ModuleBase_IPropertyPanel* aPanel = aOperation->propertyPanel();
1034     if (aPanel) {
1035       ModuleBase_ModelWidget* anActiveWidget = aPanel->activeWidget();
1036       // if there is an active widget, find the presented object in it
1037       if (!anActiveWidget)
1038         anActiveWidget = aPanel->preselectionWidget();
1039
1040       ModuleBase_WidgetValidated* aWidgetValidated = dynamic_cast<ModuleBase_WidgetValidated*>
1041                                                                              (anActiveWidget);
1042       if (aWidgetValidated)
1043         anObject = aWidgetValidated->findPresentedObject(theAIS);
1044     }
1045   }
1046   return anObject;
1047 }
1048
1049 bool PartSet_Module::canBeShaded(Handle(AIS_InteractiveObject) theAIS) const
1050 {
1051   bool aCanBeShaged = true;
1052
1053   Handle(PartSet_ResultSketchPrs) aPrs = Handle(PartSet_ResultSketchPrs)::DownCast(theAIS);
1054   if (!aPrs.IsNull())
1055     aCanBeShaged = false;
1056
1057   return aCanBeShaged;
1058 }
1059
1060 void PartSet_Module::addObjectBrowserMenu(QMenu* theMenu) const
1061 {
1062   QObjectPtrList aObjects = myWorkshop->selection()->selectedObjects();
1063   int aSelected = aObjects.size();
1064   SessionPtr aMgr = ModelAPI_Session::get();
1065   QAction* aActivatePartAction = myMenuMgr->action("ACTIVATE_PART_CMD");
1066
1067   ModuleBase_Operation* aCurrentOp = myWorkshop->currentOperation();
1068   if (aSelected == 1) {
1069     bool hasResult = false;
1070     bool hasFeature = false;
1071     bool hasParameter = false;
1072     bool hasCompositeOwner = false;
1073     ModuleBase_Tools::checkObjects(aObjects, hasResult, hasFeature, hasParameter,
1074                                    hasCompositeOwner);
1075     ObjectPtr aObject = aObjects.first();
1076     if (aObject) {
1077       ResultPartPtr aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aObject);
1078       FeaturePtr aFeature = std::dynamic_pointer_cast<ModelAPI_Feature>(aObject);
1079       bool isPart = aPart.get() ||
1080         (aFeature.get() && (aFeature->getKind() == PartSetPlugin_Part::ID()));
1081       if (isPart) {
1082         DocumentPtr aPartDoc;
1083         if (!aPart.get()) {
1084           aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aFeature->firstResult());
1085         }
1086         if (aPart.get()) // this may be null is Part feature is disabled
1087           aPartDoc = aPart->partDoc();
1088
1089         theMenu->addAction(aActivatePartAction);
1090         aActivatePartAction->setEnabled((aMgr->activeDocument() != aPartDoc));
1091
1092       } else if (aObject->document() == aMgr->activeDocument()) {
1093         if (hasParameter || hasFeature) {
1094           myMenuMgr->action("EDIT_CMD")->setEnabled(true);
1095           theMenu->addAction(myMenuMgr->action("EDIT_CMD"));
1096           if (aCurrentOp && aFeature.get()) {
1097             if (aCurrentOp->id().toStdString() == aFeature->getKind())
1098               myMenuMgr->action("EDIT_CMD")->setEnabled(false);
1099           }
1100         }
1101       }
1102
1103       ResultBodyPtr aResult = std::dynamic_pointer_cast<ModelAPI_ResultBody>(aObject);
1104       if( aResult.get() )
1105         theMenu->addAction(myMenuMgr->action("SELECT_PARENT_CMD"));
1106     }
1107   }
1108   bool aNotDeactivate = (aCurrentOp == 0);
1109   if (!aNotDeactivate) {
1110     aActivatePartAction->setEnabled(false);
1111   }
1112 }
1113
1114 void PartSet_Module::processEvent(const std::shared_ptr<Events_Message>& theMessage)
1115 {
1116   if (theMessage->eventID() == Events_Loop::loop()->eventByName(EVENT_DOCUMENT_CHANGED)) {
1117     // Do not change activation of parts if an operation active
1118     static QStringList aAllowActivationList;
1119     if (aAllowActivationList.isEmpty())
1120       aAllowActivationList <<
1121       QString(PartSetPlugin_Part::ID().c_str()) <<
1122       QString(PartSetPlugin_Duplicate::ID().c_str()) <<
1123       QString(PartSetPlugin_Remove::ID().c_str());
1124     if (myWorkshop->currentOperation() &&
1125       (!aAllowActivationList.contains(myWorkshop->currentOperation()->id())))
1126       return;
1127     XGUI_Workshop* aWorkshop = getWorkshop();
1128     XGUI_DataTree* aTreeView = aWorkshop->objectBrowser()->treeView();
1129     QLabel* aLabel = aWorkshop->objectBrowser()->activeDocLabel();
1130     QPalette aPalet = aLabel->palette();
1131
1132     SessionPtr aMgr = ModelAPI_Session::get();
1133     DocumentPtr aActiveDoc = aMgr->activeDocument();
1134     if (aActivePartIndex.isValid())
1135       aTreeView->setExpanded(aActivePartIndex, false);
1136     XGUI_DataModel* aDataModel = aWorkshop->objectBrowser()->dataModel();
1137     aActivePartIndex = aDataModel->documentRootIndex(aActiveDoc);
1138     if (aActivePartIndex.isValid())
1139       aTreeView->setExpanded(aActivePartIndex, true);
1140
1141     aLabel->setPalette(aPalet);
1142     aWorkshop->updateCommandStatus();
1143
1144     // Update displayed objects in order to update active color
1145     XGUI_Displayer* aDisplayer = aWorkshop->displayer();
1146     QObjectPtrList aObjects = aDisplayer->displayedObjects();
1147     bool aHidden;
1148     foreach(ObjectPtr aObj, aObjects) {
1149       //TODO: replace by redisplay event.
1150       aHidden = !aObj->data() || !aObj->data()->isValid() ||
1151         aObj->isDisabled() || (!aObj->isDisplayed());
1152       if (!aHidden)
1153         aDisplayer->redisplay(aObj, false);
1154     }
1155     aDisplayer->updateViewer();
1156   }
1157 }
1158
1159 void PartSet_Module::onTreeViewDoubleClick(const QModelIndex& theIndex)
1160 {
1161   if (myWorkshop->currentOperation()) // Do not change activation of parts if an operation active
1162     return;
1163   SessionPtr aMgr = ModelAPI_Session::get();
1164   if (!theIndex.isValid()) {
1165     aMgr->setActiveDocument(aMgr->moduleDocument());
1166     return;
1167   }
1168   if (theIndex.column() != 0) // Use only first column
1169     return;
1170
1171   XGUI_Workshop* aWorkshop = getWorkshop();
1172   XGUI_DataModel* aDataModel = aWorkshop->objectBrowser()->dataModel();
1173   // De not use non editable Indexes
1174   if ((aDataModel->flags(theIndex) & Qt::ItemIsSelectable) == 0)
1175     return;
1176   ObjectPtr aObj = aDataModel->object(theIndex);
1177
1178   ResultPartPtr aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aObj);
1179   if (!aPart.get()) { // Probably this is Feature
1180     FeaturePtr aPartFeature = std::dynamic_pointer_cast<ModelAPI_Feature>(aObj);
1181     if (aPartFeature.get() && (aPartFeature->getKind() == PartSetPlugin_Part::ID())) {
1182       aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aPartFeature->firstResult());
1183     }
1184   }
1185   if (aPart.get()) { // if this is a part
1186     if (aPart->partDoc() == aMgr->activeDocument()) {
1187       myMenuMgr->activatePartSet();
1188     } else {
1189       aPart->activate();
1190     }
1191   }
1192 }
1193
1194
1195 void PartSet_Module::onViewCreated(ModuleBase_IViewWindow*)
1196 {
1197   // z layer is created for all started operations in order to visualize operation AIS presentation
1198   // over the object
1199   Handle(AIS_InteractiveContext) aContext = myWorkshop->viewer()->AISContext();
1200   if (aContext.IsNull())
1201     return;
1202
1203   Handle(V3d_Viewer) aViewer = aContext->CurrentViewer();
1204   if (myVisualLayerId == 0) {
1205     if (myVisualLayerId == 0)
1206       aViewer->AddZLayer(myVisualLayerId);
1207   } else {
1208     TColStd_SequenceOfInteger aZList;
1209     aViewer->GetAllZLayers(aZList);
1210     bool aFound = false;
1211     for (int i = 1; i <= aZList.Length(); i++) {
1212       if (aZList(i) == myVisualLayerId) {
1213         aFound = true;
1214         break;
1215       }
1216     }
1217     if (!aFound)
1218       aViewer->AddZLayer(myVisualLayerId);
1219   }
1220   // if there is an active operation with validated widget,
1221   // the filters of this widget should be activated in the created view
1222   ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
1223   if (aOperation) {
1224     ModuleBase_ModelWidget* anActiveWidget = activeWidget();
1225     if (anActiveWidget) {
1226       ModuleBase_WidgetSelector* aWSelector = dynamic_cast<ModuleBase_WidgetSelector*>(anActiveWidget);
1227       if (aWSelector)
1228         aWSelector->activateSelectionAndFilters(true);
1229     }
1230   }
1231 }
1232
1233 //******************************************************
1234 void PartSet_Module::widgetStateChanged(int thePreviousState)
1235 {
1236   mySketchMgr->widgetStateChanged(thePreviousState);
1237 }
1238
1239 bool PartSet_Module::processEnter(const std::string& thePreviousAttributeID)
1240 {
1241   return mySketchReentrantMgr->processEnter(thePreviousAttributeID);
1242 }
1243
1244 //******************************************************
1245 void PartSet_Module::beforeOperationStarted(ModuleBase_Operation* theOperation)
1246 {
1247 }
1248
1249 //******************************************************
1250 void PartSet_Module::beforeOperationStopped(ModuleBase_Operation* theOperation)
1251 {
1252   if (PartSet_SketcherMgr::isSketchOperation(theOperation)) {
1253     mySketchMgr->stopSketch(theOperation);
1254   }
1255 }
1256
1257 //******************************************************
1258 GeomShapePtr PartSet_Module::findShape(const AttributePtr& theAttribute)
1259 {
1260   GeomShapePtr aGeomShape;
1261
1262   ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
1263   if (anOperation && PartSet_SketcherMgr::isNestedSketchOperation(anOperation)) {
1264     aGeomShape = PartSet_Tools::findShapeBy2DPoint(theAttribute, myWorkshop);
1265   }
1266   return aGeomShape;
1267 }
1268
1269 //******************************************************
1270 AttributePtr PartSet_Module::findAttribute(const ObjectPtr& theObject,
1271                                            const GeomShapePtr& theGeomShape)
1272 {
1273   AttributePtr anAttribute;
1274   GeomShapePtr aGeomShape = theGeomShape;
1275   if (!aGeomShape.get()) {
1276     // processing shape of result, e.g. sketch circle center is selected, this is a result
1277     // the geom shape is empty, the shape of result should be used
1278     ResultPtr aResult = std::dynamic_pointer_cast<ModelAPI_Result>(theObject);
1279     if (aResult.get()) {
1280       aGeomShape = aResult->shape();
1281     }
1282   }
1283
1284   if (aGeomShape.get()) {
1285     TopoDS_Shape aTDSShape = aGeomShape->impl<TopoDS_Shape>();
1286     return PartSet_Tools::findAttributeBy2dPoint(theObject, aTDSShape,
1287                                                  mySketchMgr->activeSketch());
1288   }
1289   return anAttribute;
1290 }
1291
1292 //******************************************************
1293 void PartSet_Module::onChoiceChanged(ModuleBase_ModelWidget* theWidget,
1294                                      int theIndex)
1295 {
1296   PartSet_WidgetChoice* aChoiceWidget = dynamic_cast<PartSet_WidgetChoice*>(theWidget);
1297   if (!aChoiceWidget)
1298     return;
1299
1300   QString aChoiceTitle = aChoiceWidget->getPropertyPanelTitle(theIndex);
1301   if (!aChoiceTitle.isEmpty()) {
1302     ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
1303     if (!aOperation)
1304       return;
1305     ModuleBase_IPropertyPanel* aPanel = aOperation->propertyPanel();
1306     if (aPanel)
1307       aPanel->setWindowTitle(aChoiceTitle);
1308   }
1309 }
1310
1311 //******************************************************
1312 XGUI_Workshop* PartSet_Module::getWorkshop() const
1313 {
1314   XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
1315   return aConnector->workshop();
1316 }
1317
1318 //******************************************************
1319 void PartSet_Module::setDefaultConstraintShown()
1320 {
1321   myHasConstraintShown[PartSet_Tools::Geometrical] = true;
1322   myHasConstraintShown[PartSet_Tools::Dimensional] = true;
1323   myHasConstraintShown[PartSet_Tools::Expressions] = false;
1324 }
1325
1326 //******************************************************
1327 bool PartSet_Module::canActivateSelectionMode(const Handle(AIS_InteractiveObject)& theIO, int theMode) const
1328 {
1329   /*if (theMode == TopAbs_FACE) {
1330     Handle(PartSet_ResultSketchPrs) aSketchPrs = Handle(PartSet_ResultSketchPrs)::DownCast(theIO);
1331     if (!aSketchPrs.IsNull()) {
1332         ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
1333         if (anOperation) {
1334           ModuleBase_IPropertyPanel* aPropPanel = anOperation->propertyPanel();
1335           if (aPropPanel) {
1336             ModuleBase_ModelWidget* aModelWgt = aPropPanel->activeWidget();
1337             ModuleBase_WidgetSelector* aWgtSelector = dynamic_cast<ModuleBase_WidgetSelector*>(aModelWgt);
1338             if (aWgtSelector) {
1339               return aWgtSelector->isFilterActivated();
1340             } else
1341               return true;
1342           } else
1343             return false;
1344         } else
1345           return false;
1346     }
1347   }*/
1348   return true;
1349 }
1350
1351 //******************************************************
1352 bool PartSet_Module::needDeactivateSelectionMode(const Handle(AIS_InteractiveObject)& theIO, int theMode) const
1353 {
1354   if (theMode == TopAbs_FACE) {
1355    // Handle(PartSet_ResultSketchPrs) aSketchPrs = Handle(PartSet_ResultSketchPrs)::DownCast(theIO);
1356    // return !aSketchPrs.IsNull();
1357   }
1358   return false;
1359 }