1 // Copyright (C) 2014-20xx CEA/DEN, EDF R&D
3 #include "PartSet_Module.h"
4 #include "PartSet_WidgetSketchLabel.h"
5 #include "PartSet_Validators.h"
6 #include "PartSet_Tools.h"
7 #include "PartSet_PreviewPlanes.h"
8 #include "PartSet_WidgetPoint2d.h"
9 #include "PartSet_WidgetPoint2dDistance.h"
10 #include "PartSet_WidgetPoint2DFlyout.h"
11 #include "PartSet_WidgetShapeSelector.h"
12 #include "PartSet_WidgetMultiSelector.h"
13 #include "PartSet_WidgetSubShapeSelector.h"
14 #include "PartSet_WidgetEditor.h"
15 #include "PartSet_WidgetFileSelector.h"
16 #include "PartSet_WidgetSketchCreator.h"
17 #include "PartSet_SketcherMgr.h"
18 #include "PartSet_SketcherReetntrantMgr.h"
19 #include "PartSet_ResultSketchPrs.h"
20 #include "PartSet_MenuMgr.h"
21 #include "PartSet_CustomPrs.h"
22 #include "PartSet_IconFactory.h"
23 #include "PartSet_WidgetChoice.h"
24 #include "PartSet_OverconstraintListener.h"
26 #include "PartSet_Filters.h"
27 #include "PartSet_FilterInfinite.h"
29 #include <PartSetPlugin_Remove.h>
30 #include <PartSetPlugin_Part.h>
31 #include <PartSetPlugin_Duplicate.h>
33 #include <ModuleBase_Operation.h>
34 #include <ModuleBase_OperationAction.h>
35 #include <ModuleBase_IViewer.h>
36 #include <ModuleBase_IViewWindow.h>
37 #include <ModuleBase_IPropertyPanel.h>
38 #include <ModuleBase_WidgetEditor.h>
39 #include <ModuleBase_WidgetValidated.h>
40 #include <ModuleBase_FilterFactory.h>
41 #include <ModuleBase_Tools.h>
42 #include <ModuleBase_OperationFeature.h>
43 #include <ModuleBase_WidgetFactory.h>
44 #include <ModuleBase_OperationDescription.h>
45 #include <ModuleBase_ViewerPrs.h>
47 #include <ModelAPI_Object.h>
48 #include <ModelAPI_Events.h>
49 #include <ModelAPI_Validator.h>
50 #include <ModelAPI_Data.h>
51 #include <ModelAPI_Session.h>
52 #include <ModelAPI_ResultBody.h>
53 #include <ModelAPI_AttributeString.h>
54 #include <ModelAPI_AttributeSelectionList.h>
55 #include <ModelAPI_Tools.h>
57 #include <GeomDataAPI_Point2D.h>
58 #include <GeomDataAPI_Point.h>
59 #include <GeomDataAPI_Dir.h>
61 #include <XGUI_Displayer.h>
62 #include <XGUI_Workshop.h>
63 #include <XGUI_OperationMgr.h>
64 #include <XGUI_PropertyPanel.h>
65 #include <XGUI_ModuleConnector.h>
66 #include <XGUI_ContextMenuMgr.h>
67 #include <XGUI_Tools.h>
68 #include <XGUI_ObjectsBrowser.h>
69 #include <XGUI_SelectionMgr.h>
70 #include <XGUI_DataModel.h>
71 #include <XGUI_ErrorMgr.h>
72 #include <XGUI_CustomPrs.h>
73 #include <XGUI_SelectionMgr.h>
74 #include <XGUI_ActionsMgr.h>
76 #include <SketchPlugin_Feature.h>
77 #include <SketchPlugin_Sketch.h>
78 #include <SketchPlugin_ConstraintAngle.h>
79 #include <SketchPlugin_ConstraintLength.h>
80 #include <SketchPlugin_ConstraintDistance.h>
81 #include <SketchPlugin_ConstraintParallel.h>
82 #include <SketchPlugin_ConstraintPerpendicular.h>
83 #include <SketchPlugin_ConstraintRadius.h>
85 #include <SketcherPrs_SymbolPrs.h>
86 #include <SketcherPrs_Coincident.h>
87 #include <SketcherPrs_Tools.h>
89 #include <Events_Loop.h>
90 #include <Config_PropManager.h>
91 #include <Config_Keywords.h>
93 #include <StdSelect_TypeOfFace.hxx>
94 #include <TopoDS_Vertex.hxx>
96 #include <TopoDS_Shape.hxx>
97 #include <BRep_Tool.hxx>
98 #include <AIS_Dimension.hxx>
101 #include <QMouseEvent>
104 #include <QApplication>
105 #include <QMessageBox>
106 #include <QMainWindow>
110 #include <GeomAlgoAPI_FaceBuilder.h>
111 #include <GeomDataAPI_Dir.h>
113 #include <SelectMgr_ListIteratorOfListOfFilter.hxx>
119 /*!Create and return new instance of XGUI_Module*/
120 extern "C" PARTSET_EXPORT ModuleBase_IModule* createModule(ModuleBase_IWorkshop* theWshop)
122 return new PartSet_Module(theWshop);
125 PartSet_Module::PartSet_Module(ModuleBase_IWorkshop* theWshop)
126 : ModuleBase_IModule(theWshop),
128 myIsOperationIsLaunched(false)
130 new PartSet_IconFactory();
132 mySketchMgr = new PartSet_SketcherMgr(this);
133 mySketchReentrantMgr = new PartSet_SketcherReetntrantMgr(theWshop);
135 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(theWshop);
136 XGUI_Workshop* aWorkshop = aConnector->workshop();
138 ModuleBase_IViewer* aViewer = theWshop->viewer();
139 connect(aViewer, SIGNAL(keyRelease(ModuleBase_IViewWindow*, QKeyEvent*)),
140 this, SLOT(onKeyRelease(ModuleBase_IViewWindow*, QKeyEvent*)));
141 connect(aViewer, SIGNAL(viewTransformed(int)),
142 SLOT(onViewTransformed(int)));
143 connect(aViewer, SIGNAL(viewCreated(ModuleBase_IViewWindow*)),
144 SLOT(onViewCreated(ModuleBase_IViewWindow*)));
145 myMenuMgr = new PartSet_MenuMgr(this);
146 myCustomPrs = new PartSet_CustomPrs(theWshop);
148 myOverconstraintListener = new PartSet_OverconstraintListener(theWshop);
150 Events_Loop* aLoop = Events_Loop::loop();
151 aLoop->registerListener(this, Events_Loop::eventByName(EVENT_DOCUMENT_CHANGED));
153 mySelectionFilters.Append(new PartSet_GlobalFilter(myWorkshop));
154 mySelectionFilters.Append(new PartSet_FilterInfinite(myWorkshop));
156 setDefaultConstraintShown();
158 Config_PropManager::registerProp("Visualization", "operation_parameter_color",
159 "Reference shape wireframe color in operation", Config_Prop::Color,
160 PartSet_CustomPrs::OPERATION_PARAMETER_COLOR());
161 Config_PropManager::registerProp("Visualization", "operation_result_color",
162 "Result shape wireframe color in operation", Config_Prop::Color,
163 PartSet_CustomPrs::OPERATION_RESULT_COLOR());
164 Config_PropManager::registerProp("Visualization", "operation_highlight_color",
165 "Multi selector item color in operation", Config_Prop::Color,
166 PartSet_CustomPrs::OPERATION_HIGHLIGHT_COLOR());
168 //Config_PropManager::registerProp(SKETCH_TAB_NAME, "disable_input_fields", "Disable input fields",
169 // Config_Prop::Boolean, "true");
172 PartSet_Module::~PartSet_Module()
174 SelectMgr_ListIteratorOfListOfFilter aIt(mySelectionFilters);
175 for (; aIt.More(); aIt.Next()) {
176 Handle(SelectMgr_Filter) aFilter = aIt.Value();
177 if (!aFilter.IsNull())
181 delete myOverconstraintListener;
184 void PartSet_Module::activateSelectionFilters()
186 SelectMgr_ListIteratorOfListOfFilter aIt(mySelectionFilters);
187 for (; aIt.More(); aIt.Next()) {
188 Handle(SelectMgr_Filter) aFilter = aIt.Value();
189 if (!aFilter.IsNull())
190 myWorkshop->viewer()->addSelectionFilter(aFilter);
194 void PartSet_Module::deactivateSelectionFilters()
196 SelectMgr_ListIteratorOfListOfFilter aIt(mySelectionFilters);
197 for (; aIt.More(); aIt.Next()) {
198 Handle(SelectMgr_Filter) aFilter = aIt.Value();
199 if (!aFilter.IsNull())
200 myWorkshop->viewer()->removeSelectionFilter(aFilter);
204 void PartSet_Module::storeSelection()
206 sketchMgr()->storeSelection();
209 void PartSet_Module::restoreSelection()
211 sketchMgr()->restoreSelection();
214 void PartSet_Module::registerValidators()
216 //Registering of validators
217 SessionPtr aMgr = ModelAPI_Session::get();
218 ModelAPI_ValidatorsFactory* aFactory = aMgr->validators();
219 aFactory->registerValidator("PartSet_DistanceSelection", new PartSet_DistanceSelection);
220 aFactory->registerValidator("PartSet_LengthSelection", new PartSet_LengthSelection);
221 aFactory->registerValidator("PartSet_PerpendicularSelection", new PartSet_PerpendicularSelection);
222 aFactory->registerValidator("PartSet_ParallelSelection", new PartSet_ParallelSelection);
223 aFactory->registerValidator("PartSet_RadiusSelection", new PartSet_RadiusSelection);
224 aFactory->registerValidator("PartSet_RigidSelection", new PartSet_RigidSelection);
225 aFactory->registerValidator("PartSet_CoincidentSelection", new PartSet_CoincidentSelection);
226 aFactory->registerValidator("PartSet_HVDirSelection", new PartSet_HVDirSelection);
227 aFactory->registerValidator("PartSet_TangentSelection", new PartSet_TangentSelection);
228 aFactory->registerValidator("PartSet_FilletSelection", new PartSet_FilletSelection);
229 aFactory->registerValidator("PartSet_AngleSelection", new PartSet_AngleSelection);
230 aFactory->registerValidator("PartSet_EqualSelection", new PartSet_EqualSelection);
231 aFactory->registerValidator("PartSet_CollinearSelection", new PartSet_CollinearSelection);
232 aFactory->registerValidator("PartSet_MiddlePointSelection", new PartSet_MiddlePointSelection);
233 aFactory->registerValidator("PartSet_DifferentObjects", new PartSet_DifferentObjectsValidator);
234 aFactory->registerValidator("PartSet_CoincidentAttr", new PartSet_CoincidentAttr);
237 void PartSet_Module::registerFilters()
239 //Registering of selection filters
240 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
241 ModuleBase_FilterFactory* aFactory = aConnector->selectionFilters();
244 void PartSet_Module::registerProperties()
246 Config_PropManager::registerProp(SKETCH_TAB_NAME, "planes_size", "Size", Config_Prop::Double,
248 Config_PropManager::registerProp(SKETCH_TAB_NAME, "planes_thickness", "Thickness",
249 Config_Prop::Integer, SKETCH_WIDTH);
250 Config_PropManager::registerProp(SKETCH_TAB_NAME, "rotate_to_plane", "Rotate to plane when selected",
251 Config_Prop::Boolean, "false");
254 void PartSet_Module::connectToPropertyPanel(ModuleBase_ModelWidget* theWidget, const bool isToConnect)
256 mySketchMgr->connectToPropertyPanel(theWidget, isToConnect);
259 void PartSet_Module::operationCommitted(ModuleBase_Operation* theOperation)
261 if (sketchMgr()->isNestedSketchOperation(theOperation)) {
262 mySketchMgr->commitNestedSketch(theOperation);
265 /// Restart sketcher operations automatically
266 if (!mySketchReentrantMgr->operationCommitted(theOperation)) {
268 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>(theOperation);
269 if (aFOperation && !aFOperation->isEditOperation()) {
270 // the selection is cleared after commit the create operation
271 // in order to do not use the same selected objects in the restarted operation
272 // for common behaviour, the selection is cleared even if the operation is not restarted
273 getWorkshop()->selector()->clearSelection();
278 void PartSet_Module::operationAborted(ModuleBase_Operation* theOperation)
280 /// Restart sketcher operations automatically
281 mySketchReentrantMgr->operationAborted(theOperation);
284 void PartSet_Module::operationStarted(ModuleBase_Operation* theOperation)
286 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>
289 XGUI_Workshop* aWorkshop = XGUI_Tools::workshop(workshop());
290 XGUI_PropertyPanel* aPropertyPanel = aWorkshop->propertyPanel();
292 ModuleBase_ModelWidget* aFilledWidget = 0;
293 bool aPostonedWidgetActivation = false;
295 FeaturePtr aFeature = aFOperation->feature();
296 /// Restart sketcher operations automatically
297 /// it is important to call method of sketch reentrant manager before filling of PP
298 /// because it fills some created feature attributes, these new values should be used
299 /// to fill the property panel
300 mySketchReentrantMgr->operationStarted(theOperation);
302 aWorkshop->fillPropertyPanel(aFOperation);
303 // filling the operation values by the current selection
304 // if the operation can be committed after the controls filling, the method perform should
305 // be stopped. Otherwise unnecessary presentations can be shown(e.g. operation prs in sketch)
306 bool isOperationCommitted = false;
307 if (!aFOperation->isEditOperation()) {
308 std::string aGreedAttributeId = ModuleBase_Tools::findGreedAttribute(workshop(), aFeature);
309 // if there is a greed attribute, automatic commit by preselection for this feature is prohibited
310 aFilledWidget = aFOperation->activateByPreselection(aGreedAttributeId);
311 if (currentOperation() != aFOperation)
312 isOperationCommitted = true;
314 if (aGreedAttributeId.empty()) {
315 // a signal should be emitted before the next widget activation
316 // because, the activation of the next widget will give a focus to the widget. As a result
317 // the value of the widget is initialized. And commit may happens until the value is entered.
319 if (mySketchReentrantMgr->canBeCommittedByPreselection())
320 isOperationCommitted = mySketchMgr->operationActivatedByPreselection();
321 // activate the next obligatory widget
322 if (!isOperationCommitted)
323 aPropertyPanel->activateNextWidget(aFilledWidget);
326 else { // there is a greed widget
327 const QList<ModuleBase_ModelWidget*>& aWidgets = aPropertyPanel->modelWidgets();
328 std::string aFirstAttributeId = aWidgets.front()->attributeID();
329 // activate next widget after greeded if it is the first widget in the panel
330 // else the first panel widget is already activated by operation start
331 if (aFirstAttributeId == aGreedAttributeId)
332 aPostonedWidgetActivation = true;
335 } if (!isOperationCommitted) {
336 workshop()->updateCommandStatus();
337 aWorkshop->connectToPropertyPanel(true);
338 updateSketcherOnStart(aFOperation);
339 updatePresentationsOnStart(aFOperation);
341 // the objects of the current operation should be deactivated
342 QObjectPtrList anObjects;
343 anObjects.append(aFeature);
344 std::list<ResultPtr> aResults;
345 ModelAPI_Tools::allResults(aFeature, aResults);
346 std::list<ResultPtr>::const_iterator aIt;
347 for (aIt = aResults.begin(); aIt != aResults.end(); ++aIt) {
348 anObjects.append(*aIt);
350 QObjectPtrList::const_iterator anIt = anObjects.begin(), aLast = anObjects.end();
351 for (; anIt != aLast; anIt++)
352 aWorkshop->deactivateActiveObject(*anIt, false);
353 if (anObjects.size() > 0) {
354 XGUI_Displayer* aDisplayer = aWorkshop->displayer();
355 aDisplayer->updateViewer();
358 if (aPostonedWidgetActivation) {
359 // if the widget is an empty in the chain of activated widgets, the current operation
360 // is restarted. It should be performed after functionality of the operation starting
361 aPropertyPanel->activateNextWidget(aFilledWidget);
366 void PartSet_Module::updateSketcherOnStart(ModuleBase_Operation* theOperation)
368 if (PartSet_SketcherMgr::isSketchOperation(theOperation)) {
369 mySketchMgr->startSketch(theOperation);
371 else if (sketchMgr()->isNestedSketchOperation(theOperation)) {
372 mySketchMgr->startNestedSketch(theOperation);
376 void PartSet_Module::updatePresentationsOnStart(ModuleBase_Operation* theOperation)
378 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>(theOperation);
380 myCustomPrs->activate(aFOperation->feature(), ModuleBase_IModule::CustomizeArguments, true);
381 myCustomPrs->activate(aFOperation->feature(), ModuleBase_IModule::CustomizeResults, true);
385 void PartSet_Module::operationResumed(ModuleBase_Operation* theOperation)
387 ModuleBase_IModule::operationResumed(theOperation);
389 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>(theOperation);
391 myCustomPrs->activate(aFOperation->feature(), ModuleBase_IModule::CustomizeArguments, true);
392 myCustomPrs->activate(aFOperation->feature(), ModuleBase_IModule::CustomizeResults, true);
396 void PartSet_Module::operationStopped(ModuleBase_Operation* theOperation)
398 bool isModifiedArgs = myCustomPrs->deactivate(ModuleBase_IModule::CustomizeArguments, false);
399 bool isModifiedResults = myCustomPrs->deactivate(ModuleBase_IModule::CustomizeResults, false);
400 bool isModified = isModifiedArgs || isModifiedResults;
402 if (sketchMgr()->isNestedSketchOperation(theOperation)) {
403 mySketchMgr->stopNestedSketch(theOperation);
405 else if (PartSet_SketcherMgr::isSketchOperation(theOperation))
406 setDefaultConstraintShown();
408 //VSV: Viewer is updated on feature update and redisplay
410 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(myWorkshop);
411 XGUI_Displayer* aDisplayer = aConnector->workshop()->displayer();
412 aDisplayer->updateViewer();
415 QMap<PartSet_Tools::ConstraintVisibleState, bool>::const_iterator anIt = myHasConstraintShown.begin(),
416 aLast = myHasConstraintShown.end();
417 for (; anIt != aLast; anIt++) {
418 mySketchMgr->updateBySketchParameters(anIt.key(), anIt.value());
422 ModuleBase_Operation* PartSet_Module::currentOperation() const
424 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
425 XGUI_OperationMgr* anOpMgr = aConnector->workshop()->operationMgr();
426 return anOpMgr->currentOperation();
429 bool PartSet_Module::canUndo() const
431 bool aCanUndo = false;
432 SessionPtr aMgr = ModelAPI_Session::get();
433 if (aMgr->hasModuleDocument() && aMgr->canUndo()) {
434 aCanUndo = !aMgr->isOperation();
435 if (!aCanUndo) // check the enable state additionally by sketch manager
436 aCanUndo = aMgr->canUndo();
441 bool PartSet_Module::canRedo() const
443 bool aCanRedo = false;
444 SessionPtr aMgr = ModelAPI_Session::get();
445 if (aMgr->hasModuleDocument() && aMgr->canRedo()) {
446 aCanRedo = !aMgr->isOperation();
447 if (!aCanRedo) // check the enable state additionally by sketch manager
448 aCanRedo = aMgr->canRedo();
453 bool PartSet_Module::canApplyAction(const ObjectPtr& theObject, const QString& theActionId) const
456 if (theActionId == "MOVE_CMD") {
457 FeaturePtr aFeature = ModelAPI_Feature::feature(theObject);
459 ResultPtr aResult = ModuleBase_Tools::firstResult(aFeature);
460 // part features can not be moved in the history.
461 if (aResult.get() && aResult->groupName() == ModelAPI_ResultPart::group())
468 bool PartSet_Module::canEraseObject(const ObjectPtr& theObject) const
470 // the sketch manager put the restriction to the objects erase
471 return mySketchMgr->canEraseObject(theObject);
474 bool PartSet_Module::canDisplayObject(const ObjectPtr& theObject) const
476 // the sketch manager put the restriction to the objects display
477 return mySketchMgr->canDisplayObject(theObject);
480 /*void PartSet_Module::processHiddenObject(const std::list<ObjectPtr>& theObjects)
482 mySketchMgr->processHiddenObject(theObjects);
485 bool PartSet_Module::canActivateSelection(const ObjectPtr& theObject) const
487 bool aCanActivate = ModuleBase_IModule::canActivateSelection(theObject);
489 ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
490 bool isSketchOp = PartSet_SketcherMgr::isSketchOperation(anOperation),
491 isNestedOp = sketchMgr()->isNestedSketchOperation(anOperation);
492 if (isSketchOp || isNestedOp) {
493 // in active sketch operation it is possible to activate operation object in selection
494 // in the edit operation, e.g. points of the line can be moved when the line is edited
495 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>(anOperation);
496 aCanActivate = aCanActivate || (aFOperation && aFOperation->isEditOperation());
501 bool PartSet_Module::addViewerMenu(const QMap<QString, QAction*>& theStdActions,
503 QMap<int, QAction*>& theMenuActions) const
505 return myMenuMgr->addViewerMenu(theStdActions, theParent, theMenuActions);
508 void PartSet_Module::updateViewerMenu(const QMap<QString, QAction*>& theStdActions)
510 myMenuMgr->updateViewerMenu(theStdActions);
513 bool PartSet_Module::isActionEnableStateFixed(const int theActionId) const
515 bool isEnabledFixed = false;
516 if (theActionId == XGUI_ActionsMgr::AcceptAll &&
517 mySketchReentrantMgr->isInternalEditStarted())
518 isEnabledFixed = true;
519 return isEnabledFixed;
522 QString PartSet_Module::getFeatureError(const FeaturePtr& theFeature)
524 QString anError = ModuleBase_IModule::getFeatureError(theFeature);
525 if (anError.isEmpty())
526 anError = sketchMgr()->getFeatureError(theFeature);
531 void PartSet_Module::grantedOperationIds(ModuleBase_Operation* theOperation,
532 QStringList& theIds) const
534 myMenuMgr->grantedOperationIds(theOperation, theIds);
536 if (PartSet_SketcherMgr::isSketchOperation(theOperation)) {
537 XGUI_Workshop* aWorkshop = getWorkshop();
538 theIds.append(aWorkshop->contextMenuMgr()->action("DELETE_CMD")->text());
542 void PartSet_Module::activeSelectionModes(QIntList& theModes)
545 if (mySketchMgr->activeSketch().get())
546 PartSet_SketcherMgr::sketchSelectionModes(theModes);
549 void PartSet_Module::customSubShapesSelectionModes(QIntList& theTypes)
551 if (theTypes.contains(TopAbs_FACE))
552 theTypes.append(SketcherPrs_Tools::Sel_Sketch_Face);
553 if (theTypes.contains(TopAbs_WIRE))
554 theTypes.append(SketcherPrs_Tools::Sel_Sketch_Wire);
557 bool PartSet_Module::isMouseOverWindow()
559 return mySketchMgr->isMouseOverWindow();
562 bool PartSet_Module::isSketchNeutralPointActivated() const
564 bool isNeutralPoint = true;
565 if (sketchReentranceMgr()->isInternalEditStarted())
566 isNeutralPoint = false;
567 if (myIsOperationIsLaunched)
568 isNeutralPoint = false;
570 return isNeutralPoint;
573 void PartSet_Module::closeDocument()
578 void PartSet_Module::clearViewer()
580 myCustomPrs->clearPrs();
582 XGUI_Workshop* aWorkshop = getWorkshop();
583 XGUI_Displayer* aDisplayer = aWorkshop->displayer();
584 aDisplayer->deactivateSelectionFilters();
587 void PartSet_Module::propertyPanelDefined(ModuleBase_Operation* theOperation)
589 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>(theOperation);
593 ModuleBase_IPropertyPanel* aPanel = aFOperation->propertyPanel();
594 // we have to manually activate the sketch label in edit mode
595 if (PartSet_SketcherMgr::isSketchOperation(aFOperation) && (aFOperation->isEditOperation()))
596 aPanel->activateWidget(aPanel->modelWidgets().first());
599 bool PartSet_Module::createWidgets(ModuleBase_Operation* theOperation,
600 QList<ModuleBase_ModelWidget*>& theWidgets) const
602 bool aProcessed = false;
604 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>(theOperation);
605 XGUI_Workshop* aWorkshop = getWorkshop();
606 XGUI_PropertyPanel* aPropertyPanel = aWorkshop->propertyPanel();
607 if (mySketchMgr->activeSketch().get() && aFOperation && aPropertyPanel) {
608 ModuleBase_ISelection* aSelection = workshop()->selection();
609 // click on a point in sketch leads here with the point is highlighted, not yet selected
610 QList<ModuleBase_ViewerPrsPtr> aPreselection = aSelection->getHighlighted();
611 if (aPreselection.size() == 1) {
612 ModuleBase_ViewerPrsPtr aSelectedPrs = aPreselection[0];
613 ObjectPtr anObject = aSelectedPrs->object();
615 FeaturePtr aFeature = ModelAPI_Feature::feature(anObject);
616 FeaturePtr anOpFeature = aFOperation->feature();
617 GeomShapePtr aShape = aSelectedPrs->shape();
618 // click on the digit of dimension constrain comes here with an empty shape, so we need the check
619 if (aFeature == anOpFeature && aShape.get() && !aShape->isNull()) {
620 const TopoDS_Shape& aTDShape = aShape->impl<TopoDS_Shape>();
621 AttributePtr anAttribute = PartSet_Tools::findAttributeBy2dPoint(anObject, aTDShape,
622 mySketchMgr->activeSketch());
623 if (anAttribute.get()) {
624 QString aXmlRepr = aFOperation->getDescription()->xmlRepresentation();
625 ModuleBase_WidgetFactory aFactory(aXmlRepr.toStdString(), workshop());
627 const std::string anAttributeId = anAttribute->id();
628 aFactory.createWidget(aPropertyPanel->contentWidget(), anAttributeId);
630 theWidgets = aFactory.getModelWidgets();
631 // it is possible that the point does not present in XML definition,
632 // in this case, we assume that it is not processed by this module
633 // e.g. "Intersection point" feature
634 aProcessed = !theWidgets.isEmpty();
642 void PartSet_Module::onSelectionChanged()
644 ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
648 bool isSketcherOp = false;
649 // An edit operation is enable only if the current opeation is the sketch operation
650 if (mySketchMgr->activeSketch()) {
651 if (PartSet_Tools::sketchPlane(mySketchMgr->activeSketch()))
652 isSketcherOp = PartSet_SketcherMgr::isSketchOperation(aOperation);
655 // Editing of constraints can be done on selection
656 ModuleBase_ISelection* aSelect = myWorkshop->selection();
657 QList<ModuleBase_ViewerPrsPtr> aSelected = aSelect->getSelected();
658 if (aSelected.size() == 1) {
659 ModuleBase_ViewerPrsPtr aPrs = aSelected.first();
660 ObjectPtr aObject = aPrs->object();
661 FeaturePtr aFeature = ModelAPI_Feature::feature(aObject);
663 std::string aId = aFeature->getKind();
664 if ((aId == SketchPlugin_ConstraintRadius::ID()) ||
665 (aId == SketchPlugin_ConstraintLength::ID()) ||
666 (aId == SketchPlugin_ConstraintDistance::ID()) ||
667 (aId == SketchPlugin_ConstraintAngle::ID())) {
668 editFeature(aFeature);
675 void PartSet_Module::onKeyRelease(ModuleBase_IViewWindow* theWnd, QKeyEvent* theEvent)
677 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
678 XGUI_OperationMgr* anOpMgr = aConnector->workshop()->operationMgr();
679 anOpMgr->onKeyReleased(theWnd->viewPort(), theEvent);
682 ModuleBase_ModelWidget* PartSet_Module::createWidgetByType(const std::string& theType,
684 Config_WidgetAPI* theWidgetApi)
686 ModuleBase_IWorkshop* aWorkshop = workshop();
687 XGUI_Workshop* aXUIWorkshop = getWorkshop();
688 ModuleBase_ModelWidget* aWgt = NULL;
689 if (theType == "sketch-start-label") {
690 PartSet_WidgetSketchLabel* aLabelWgt = new PartSet_WidgetSketchLabel(theParent, aWorkshop,
691 theWidgetApi, myHasConstraintShown);
692 connect(aLabelWgt, SIGNAL(planeSelected(const std::shared_ptr<GeomAPI_Pln>&)),
693 mySketchMgr, SLOT(onPlaneSelected(const std::shared_ptr<GeomAPI_Pln>&)));
694 connect(aLabelWgt, SIGNAL(showConstraintToggled(int, bool)),
695 mySketchMgr, SLOT(onShowConstraintsToggle(int, bool)));
697 } else if (theType == "sketch-2dpoint_selector") {
698 PartSet_WidgetPoint2D* aPointWgt = new PartSet_WidgetPoint2D(theParent, aWorkshop,
700 aPointWgt->setSketch(mySketchMgr->activeSketch());
701 connect(aPointWgt, SIGNAL(vertexSelected()), sketchReentranceMgr(), SLOT(onVertexSelected()));
703 }else if (theType == "sketch-2dpoint_flyout_selector") {
704 PartSet_WidgetPoint2DFlyout* aPointWgt = new PartSet_WidgetPoint2DFlyout(theParent, aWorkshop,
706 aPointWgt->setSketch(mySketchMgr->activeSketch());
707 connect(aPointWgt, SIGNAL(vertexSelected()), sketchReentranceMgr(), SLOT(onVertexSelected()));
709 } else if (theType == "point2ddistance") {
710 PartSet_WidgetPoint2dDistance* aDistanceWgt = new PartSet_WidgetPoint2dDistance(theParent,
711 aWorkshop, theWidgetApi);
712 aDistanceWgt->setSketch(mySketchMgr->activeSketch());
714 } else if (theType == "sketch_shape_selector") {
715 PartSet_WidgetShapeSelector* aShapeSelectorWgt =
716 new PartSet_WidgetShapeSelector(theParent, aWorkshop, theWidgetApi);
717 aShapeSelectorWgt->setSketcher(mySketchMgr->activeSketch());
718 aWgt = aShapeSelectorWgt;
719 } else if (theType == "sketch_multi_selector") {
720 PartSet_WidgetMultiSelector* aShapeSelectorWgt =
721 new PartSet_WidgetMultiSelector(theParent, aWorkshop, theWidgetApi);
722 aShapeSelectorWgt->setSketcher(mySketchMgr->activeSketch());
723 aWgt = aShapeSelectorWgt;
725 else if (theType == "sketch_sub_shape_selector") {
726 PartSet_WidgetSubShapeSelector* aSubShapeSelectorWgt =
727 new PartSet_WidgetSubShapeSelector(theParent, aWorkshop, theWidgetApi);
728 aSubShapeSelectorWgt->setSketcher(mySketchMgr->activeSketch());
729 aWgt = aSubShapeSelectorWgt;
731 else if (theType == WDG_DOUBLEVALUE_EDITOR) {
732 aWgt = new PartSet_WidgetEditor(theParent, aWorkshop, theWidgetApi);
733 } else if (theType == "export_file_selector") {
734 aWgt = new PartSet_WidgetFileSelector(theParent, aWorkshop, theWidgetApi);
735 } else if (theType == "sketch_launcher") {
736 aWgt = new PartSet_WidgetSketchCreator(theParent, this, theWidgetApi);
737 } else if (theType == "module_choice") {
738 aWgt = new PartSet_WidgetChoice(theParent, theWidgetApi);
739 connect(aWgt, SIGNAL(itemSelected(ModuleBase_ModelWidget*, int)),
740 this, SLOT(onChoiceChanged(ModuleBase_ModelWidget*, int)));
745 ModuleBase_ModelWidget* PartSet_Module::activeWidget() const
747 ModuleBase_ModelWidget* anActiveWidget = 0;
749 anActiveWidget = mySketchReentrantMgr->internalActiveWidget();
750 if (!anActiveWidget) {
751 ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
753 ModuleBase_IPropertyPanel* aPanel = aOperation->propertyPanel();
754 anActiveWidget = aPanel ? aPanel->activeWidget() : 0;
757 return anActiveWidget;
760 bool PartSet_Module::deleteObjects()
762 bool isProcessed = false;
764 XGUI_Workshop* aWorkshop = getWorkshop();
765 XGUI_OperationMgr* anOpMgr = aWorkshop->operationMgr();
767 //SessionPtr aMgr = ModelAPI_Session::get();
768 // 1. check whether the delete should be processed in the module
769 ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
770 bool isSketchOp = PartSet_SketcherMgr::isSketchOperation(anOperation),
771 isNestedOp = sketchMgr()->isNestedSketchOperation(anOperation);
772 if (isSketchOp || isNestedOp) {
774 // 2. find selected presentations
775 // selected objects should be collected before the current operation abort because
776 // the abort leads to selection lost on constraint objects. It can be corrected after #386 issue
777 ModuleBase_ISelection* aSel = workshop()->selection();
778 QObjectPtrList aSelectedObj = aSel->selectedPresentations();
779 // if there are no selected objects in the viewer, that means that the selection in another
780 // place cased this method. It is necessary to return the false value to understande in above
781 // method that delete is not processed
782 if (aSelectedObj.count() == 0)
785 // avoid delete of the objects, which are not belong to the current sketch
786 // in order to do not delete results of other sketches
787 QObjectPtrList aSketchObjects;
788 QObjectPtrList::const_iterator anIt = aSelectedObj.begin(), aLast = aSelectedObj.end();
789 for ( ; anIt != aLast; anIt++) {
790 ObjectPtr anObject = *anIt;
791 if (mySketchMgr->isObjectOfSketch(anObject)) {
792 // sketch feature should be used in this list because workshop deletes features only
793 // results are skipped
794 FeaturePtr aSketchFeature = ModelAPI_Feature::feature(anObject);
795 aSketchObjects.append(aSketchFeature);
798 // if the selection contains only local selected presentations from other sketches,
799 // the Delete operation should not be done at all
800 if (aSketchObjects.size() == 0)
803 // 3. start operation
804 QString aDescription = aWorkshop->contextMenuMgr()->action("DELETE_CMD")->text();
805 ModuleBase_OperationAction* anOpAction = new ModuleBase_OperationAction(aDescription, this);
807 // the active nested sketch operation should be aborted unconditionally
808 // the Delete action should be additionally granted for the Sketch operation
809 // in order to do not abort/commit it
810 if (!anOpMgr->canStartOperation(anOpAction->id()))
811 return true; // the objects are processed but can not be deleted
813 anOpMgr->startOperation(anOpAction);
815 // WORKAROUND, should be done to avoid viewer highlight update after deletetion of objects
816 // the problem is in AIS Dimensions recompute if a line and the dim are removed, line is the first
817 // it causes the AIS recompute, where the base line is null, the result is empty AIS in the viewer
818 XGUI_Tools::workshop(myWorkshop)->selector()->clearSelection();
820 // 4. delete features
821 // sketch feature should be skipped, only sub-features can be removed
822 // when sketch operation is active
823 aWorkshop->deleteFeatures(aSketchObjects);
825 anOpMgr->commitOperation();
830 void PartSet_Module::onFeatureTriggered()
832 // is commented for imp: Unpressing the button of the current action must behave like
833 // a validation if the entity can be created (instead of Cancel, as currently)
834 /*QAction* aCmd = dynamic_cast<QAction*>(sender());
835 if (aCmd->isCheckable() && aCmd->isChecked()) {
836 // 1. check whether the delete should be processed in the module
837 ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
838 bool isNestedOp = myModule->sketchMgr()->isNestedCreateOperation(anOperation);
840 // in case if in the viewer nothing is displayed, the create operation should not be
841 // comitted even if all values of the feature are initialized
842 if (!mySketchMgr->canDisplayCurrentCreatedFeature()) {
843 // the action information should be saved before the operation is aborted
844 // because this abort leads to update command status, which unchecks this action
845 anOperation->abort();
846 launchOperation(aCmd->data().toString());
850 ModuleBase_IModule::onFeatureTriggered();
853 void PartSet_Module::editFeature(FeaturePtr theFeature)
855 storeConstraintsState(theFeature->getKind());
856 ModuleBase_IModule::editFeature(theFeature);
859 bool PartSet_Module::canCommitOperation() const
864 void PartSet_Module::launchOperation(const QString& theCmdId)
866 myIsOperationIsLaunched = true;
867 storeConstraintsState(theCmdId.toStdString());
868 updateConstraintsState(theCmdId.toStdString());
870 ModuleBase_IModule::launchOperation(theCmdId);
872 myIsOperationIsLaunched = false;
875 void PartSet_Module::storeConstraintsState(const std::string& theFeatureKind)
877 if (myWorkshop->currentOperation() &&
878 myWorkshop->currentOperation()->id().toStdString() == SketchPlugin_Sketch::ID()) {
879 const QMap<PartSet_Tools::ConstraintVisibleState, bool>& aShownStates =
880 mySketchMgr->showConstraintStates();
881 myHasConstraintShown = aShownStates;
885 void PartSet_Module::updateConstraintsState(const std::string& theFeatureKind)
887 if (PartSet_SketcherMgr::constraintsIdList().contains(theFeatureKind.c_str()) ||
888 PartSet_SketcherMgr::replicationsIdList().contains(theFeatureKind.c_str())) {
889 // Show constraints if a constraint was anOperation
890 mySketchMgr->updateBySketchParameters(PartSet_Tools::Geometrical, true);
891 mySketchMgr->updateBySketchParameters(PartSet_Tools::Dimensional, true);
892 mySketchMgr->updateBySketchParameters(PartSet_Tools::Expressions,
893 myHasConstraintShown[PartSet_Tools::Expressions]);
897 void PartSet_Module::onObjectDisplayed(ObjectPtr theObject, AISObjectPtr theAIS)
899 Handle(AIS_InteractiveObject) anAIS = theAIS->impl<Handle(AIS_InteractiveObject)>();
900 if (!anAIS.IsNull()) {
901 Handle(AIS_InteractiveContext) aCtx = anAIS->GetContext();
902 Handle(AIS_Dimension) aDim = Handle(AIS_Dimension)::DownCast(anAIS);
903 if (!aDim.IsNull()) {
904 aCtx->SetZLayer(aDim, myVisualLayerId);
906 Handle(SketcherPrs_SymbolPrs) aCons = Handle(SketcherPrs_SymbolPrs)::DownCast(anAIS);
908 aCtx->SetZLayer(aCons, myVisualLayerId);
913 void PartSet_Module::onBeforeObjectErase(ObjectPtr theObject, AISObjectPtr theAIS)
916 // it should be recomputed in order to disappear in the viewer if the corresponded object
918 //if (myCustomPrs->isActive())
919 // myCustomPrs->redisplay(theObject, false);
922 void PartSet_Module::onViewTransformed(int theTrsfType)
924 // Set length of arrows constant in pixel size
925 // if the operation is panning or rotate or panglobal then do nothing
926 if ((theTrsfType == 1) || (theTrsfType == 3) || (theTrsfType == 4))
928 ModuleBase_IViewer* aViewer = myWorkshop->viewer();
929 Handle(AIS_InteractiveContext) aContext = aViewer->AISContext();
930 if (aContext.IsNull())
933 //Handle(V3d_View) aView = aViewer->activeView();
935 XGUI_Workshop* aWorkshop = getWorkshop();
936 XGUI_Displayer* aDisplayer = aWorkshop->displayer();
937 Handle(V3d_Viewer) aV3dViewer = aContext->CurrentViewer();
938 Handle(V3d_View) aView;
940 for (aV3dViewer->InitDefinedViews();
941 aV3dViewer->MoreDefinedViews();
942 aV3dViewer->NextDefinedViews()) {
943 Handle(V3d_View) aV = aV3dViewer->DefinedView();
944 double aS = aV->Scale();
952 double aLen = aView->Convert(SketcherPrs_Tools::getDefaultArrowSize());
954 double aPrevLen = SketcherPrs_Tools::getArrowSize();
955 SketcherPrs_Tools::setArrowSize(aLen);
956 const double aPrevScale = aViewer->Scale(aViewer->activeView());
957 const double aCurScale = aViewer->activeView()->Camera()->Scale();
958 aViewer->SetScale(aViewer->activeView(), aCurScale);
959 SketcherPrs_Tools::setTextHeight (aCurScale / aPrevScale * SketcherPrs_Tools::getTextHeight());
960 bool isModified = false;
961 QList<AISObjectPtr> aPrsList = aDisplayer->displayedPresentations();
962 foreach (AISObjectPtr aAIS, aPrsList) {
963 Handle(AIS_InteractiveObject) aAisObj = aAIS->impl<Handle(AIS_InteractiveObject)>();
965 Handle(AIS_Dimension) aDim = Handle(AIS_Dimension)::DownCast(aAisObj);
966 if (!aDim.IsNull()) {
967 aDim->DimensionAspect()->ArrowAspect()->SetLength(aLen);
968 aContext->Redisplay(aDim, false);
973 aDisplayer->updateViewer();
976 bool PartSet_Module::isCustomPrsActivated(const ModuleBase_CustomizeFlag& theFlag) const
978 return myCustomPrs->isActive(theFlag);
981 void PartSet_Module::activateCustomPrs(const FeaturePtr& theFeature, const ModuleBase_CustomizeFlag& theFlag,
982 const bool theUpdateViewer)
984 myCustomPrs->activate(theFeature, theFlag, theUpdateViewer);
987 void PartSet_Module::deactivateCustomPrs(const ModuleBase_CustomizeFlag& theFlag,
988 const bool theUpdateViewer)
990 myCustomPrs->deactivate(theFlag, theUpdateViewer);
993 bool PartSet_Module::customisePresentation(ResultPtr theResult, AISObjectPtr thePrs,
994 std::shared_ptr<GeomAPI_ICustomPrs> theCustomPrs)
996 bool aCustomized = false;
998 XGUI_Workshop* aWorkshop = getWorkshop();
999 XGUI_Displayer* aDisplayer = aWorkshop->displayer();
1000 ObjectPtr anObject = aDisplayer->getObject(thePrs);
1004 if (!theResult.get()) {
1005 bool isConflicting = myOverconstraintListener->isConflictingObject(anObject);
1006 // customize sketch symbol presentation
1008 Handle(AIS_InteractiveObject) anAISIO = thePrs->impl<Handle(AIS_InteractiveObject)>();
1009 if (!anAISIO.IsNull()) {
1010 if (!Handle(SketcherPrs_SymbolPrs)::DownCast(anAISIO).IsNull()) {
1011 Handle(SketcherPrs_SymbolPrs) aPrs = Handle(SketcherPrs_SymbolPrs)::DownCast(anAISIO);
1012 if (!aPrs.IsNull()) {
1013 std::vector<int> aColor;
1014 myOverconstraintListener->getConflictingColor(aColor);
1015 aPrs->SetConflictingConstraint(isConflicting, aColor);
1018 } else if (!Handle(SketcherPrs_Coincident)::DownCast(anAISIO).IsNull()) {
1019 Handle(SketcherPrs_Coincident) aPrs = Handle(SketcherPrs_Coincident)::DownCast(anAISIO);
1020 if (!aPrs.IsNull()) {
1021 std::vector<int> aColor;
1022 myOverconstraintListener->getConflictingColor(aColor);
1023 aPrs->SetConflictingConstraint(isConflicting, aColor);
1029 // customize sketch dimension constraint presentation
1031 std::vector<int> aColor;
1032 if (isConflicting) {
1033 myOverconstraintListener->getConflictingColor(aColor);
1036 XGUI_CustomPrs::getDefaultColor(anObject, true, aColor);
1037 if (!aColor.empty()) {
1038 aCustomized = thePrs->setColor(aColor[0], aColor[1], aColor[2]);
1042 // customize dimentional constrains
1043 sketchMgr()->customizePresentation(anObject);
1048 bool PartSet_Module::customizeObject(ObjectPtr theObject, const ModuleBase_CustomizeFlag& theFlag,
1049 const bool theUpdateViewer)
1051 bool isRedisplayed = false;
1052 if (myCustomPrs->isActive(theFlag))
1053 isRedisplayed = myCustomPrs->redisplay(theObject, theFlag, theUpdateViewer);
1055 return isRedisplayed;
1058 void PartSet_Module::customizeObjectBrowser(QWidget* theObjectBrowser)
1060 XGUI_ObjectsBrowser* aOB = dynamic_cast<XGUI_ObjectsBrowser*>(theObjectBrowser);
1062 QLabel* aLabel = aOB->activeDocLabel();
1063 aLabel->installEventFilter(myMenuMgr);
1064 connect(aLabel, SIGNAL(customContextMenuRequested(const QPoint&)),
1065 SLOT(onActiveDocPopup(const QPoint&)));
1066 //QPalette aPalet = aLabel->palette();
1067 //aPalet.setColor(QPalette::Text, QColor(0, 72, 140));
1068 //aLabel->setPalette(aPalet);
1069 aOB->treeView()->setExpandsOnDoubleClick(false);
1070 connect(aOB->treeView(), SIGNAL(doubleClicked(const QModelIndex&)),
1071 SLOT(onTreeViewDoubleClick(const QModelIndex&)));
1075 void PartSet_Module::onActiveDocPopup(const QPoint& thePnt)
1077 SessionPtr aMgr = ModelAPI_Session::get();
1078 QAction* aActivatePartAction = myMenuMgr->action("ACTIVATE_PARTSET_CMD");
1080 XGUI_Workshop* aWorkshop = getWorkshop();
1081 QLabel* aHeader = aWorkshop->objectBrowser()->activeDocLabel();
1083 aActivatePartAction->setEnabled((aMgr->activeDocument() != aMgr->moduleDocument()));
1086 aMenu.addAction(aActivatePartAction);
1087 aMenu.exec(aHeader->mapToGlobal(thePnt));
1090 Handle(AIS_InteractiveObject) PartSet_Module::createPresentation(const ResultPtr& theResult)
1092 return mySketchMgr->createPresentation(theResult);
1096 ObjectPtr PartSet_Module::findPresentedObject(const AISObjectPtr& theAIS) const
1099 ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
1101 /// If last line finished on vertex the lines creation sequence has to be break
1102 ModuleBase_IPropertyPanel* aPanel = aOperation->propertyPanel();
1104 ModuleBase_ModelWidget* anActiveWidget = aPanel->activeWidget();
1105 // if there is an active widget, find the presented object in it
1106 if (!anActiveWidget)
1107 anActiveWidget = aPanel->preselectionWidget();
1109 ModuleBase_WidgetValidated* aWidgetValidated = dynamic_cast<ModuleBase_WidgetValidated*>
1111 if (aWidgetValidated)
1112 anObject = aWidgetValidated->findPresentedObject(theAIS);
1118 bool PartSet_Module::canBeShaded(Handle(AIS_InteractiveObject) theAIS) const
1120 bool aCanBeShaged = true;
1122 Handle(PartSet_ResultSketchPrs) aPrs = Handle(PartSet_ResultSketchPrs)::DownCast(theAIS);
1124 aCanBeShaged = false;
1126 return aCanBeShaged;
1129 void PartSet_Module::addObjectBrowserMenu(QMenu* theMenu) const
1131 QObjectPtrList aObjects = myWorkshop->selection()->selectedObjects();
1132 int aSelected = aObjects.size();
1133 SessionPtr aMgr = ModelAPI_Session::get();
1134 QAction* aActivatePartAction = myMenuMgr->action("ACTIVATE_PART_CMD");
1136 ModuleBase_Operation* aCurrentOp = myWorkshop->currentOperation();
1137 if (aSelected == 1) {
1138 bool hasResult = false;
1139 bool hasFeature = false;
1140 bool hasParameter = false;
1141 bool hasCompositeOwner = false;
1142 ModuleBase_Tools::checkObjects(aObjects, hasResult, hasFeature, hasParameter,
1144 ObjectPtr aObject = aObjects.first();
1146 ResultPartPtr aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aObject);
1147 FeaturePtr aFeature = std::dynamic_pointer_cast<ModelAPI_Feature>(aObject);
1148 bool isPart = aPart.get() ||
1149 (aFeature.get() && (aFeature->getKind() == PartSetPlugin_Part::ID()));
1151 DocumentPtr aPartDoc;
1153 aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aFeature->firstResult());
1155 if (aPart.get()) // this may be null is Part feature is disabled
1156 aPartDoc = aPart->partDoc();
1158 theMenu->addAction(aActivatePartAction);
1159 aActivatePartAction->setEnabled((aMgr->activeDocument() != aPartDoc));
1161 } else if (aObject->document() == aMgr->activeDocument()) {
1162 if (hasParameter || hasFeature) {
1163 myMenuMgr->action("EDIT_CMD")->setEnabled(true);
1164 theMenu->addAction(myMenuMgr->action("EDIT_CMD"));
1165 if (aCurrentOp && aFeature.get()) {
1166 if (aCurrentOp->id().toStdString() == aFeature->getKind())
1167 myMenuMgr->action("EDIT_CMD")->setEnabled(false);
1172 ResultBodyPtr aResult = std::dynamic_pointer_cast<ModelAPI_ResultBody>(aObject);
1174 theMenu->addAction(myMenuMgr->action("SELECT_PARENT_CMD"));
1177 bool aNotDeactivate = (aCurrentOp == 0);
1178 if (!aNotDeactivate) {
1179 aActivatePartAction->setEnabled(false);
1183 void PartSet_Module::processEvent(const std::shared_ptr<Events_Message>& theMessage)
1185 if (theMessage->eventID() == Events_Loop::loop()->eventByName(EVENT_DOCUMENT_CHANGED)) {
1186 // Do not change activation of parts if an operation active
1187 static QStringList aAllowActivationList;
1188 if (aAllowActivationList.isEmpty())
1189 aAllowActivationList <<
1190 QString(PartSetPlugin_Part::ID().c_str()) <<
1191 QString(PartSetPlugin_Duplicate::ID().c_str()) <<
1192 QString(PartSetPlugin_Remove::ID().c_str());
1193 if (myWorkshop->currentOperation() &&
1194 (!aAllowActivationList.contains(myWorkshop->currentOperation()->id())))
1196 XGUI_Workshop* aWorkshop = getWorkshop();
1197 XGUI_DataTree* aTreeView = aWorkshop->objectBrowser()->treeView();
1198 QLabel* aLabel = aWorkshop->objectBrowser()->activeDocLabel();
1199 QPalette aPalet = aLabel->palette();
1201 SessionPtr aMgr = ModelAPI_Session::get();
1202 DocumentPtr aActiveDoc = aMgr->activeDocument();
1203 if (aActivePartIndex.isValid())
1204 aTreeView->setExpanded(aActivePartIndex, false);
1205 XGUI_DataModel* aDataModel = aWorkshop->objectBrowser()->dataModel();
1206 aActivePartIndex = aDataModel->documentRootIndex(aActiveDoc);
1207 if (aActivePartIndex.isValid())
1208 aTreeView->setExpanded(aActivePartIndex, true);
1210 aLabel->setPalette(aPalet);
1211 aWorkshop->updateCommandStatus();
1213 // Update displayed objects in order to update active color
1214 XGUI_Displayer* aDisplayer = aWorkshop->displayer();
1215 QObjectPtrList aObjects = aDisplayer->displayedObjects();
1217 foreach(ObjectPtr aObj, aObjects) {
1218 //TODO: replace by redisplay event.
1219 aHidden = !aObj->data() || !aObj->data()->isValid() ||
1220 aObj->isDisabled() || (!aObj->isDisplayed());
1222 aDisplayer->redisplay(aObj, false);
1224 aDisplayer->updateViewer();
1228 void PartSet_Module::onTreeViewDoubleClick(const QModelIndex& theIndex)
1230 if (myWorkshop->currentOperation()) // Do not change activation of parts if an operation active
1232 SessionPtr aMgr = ModelAPI_Session::get();
1233 if (!theIndex.isValid()) {
1234 aMgr->setActiveDocument(aMgr->moduleDocument());
1237 if (theIndex.column() != 0) // Use only first column
1240 XGUI_Workshop* aWorkshop = getWorkshop();
1241 XGUI_DataModel* aDataModel = aWorkshop->objectBrowser()->dataModel();
1242 // De not use non editable Indexes
1243 if ((aDataModel->flags(theIndex) & Qt::ItemIsSelectable) == 0)
1245 ObjectPtr aObj = aDataModel->object(theIndex);
1247 ResultPartPtr aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aObj);
1248 if (!aPart.get()) { // Probably this is Feature
1249 FeaturePtr aPartFeature = std::dynamic_pointer_cast<ModelAPI_Feature>(aObj);
1250 if (aPartFeature.get() && (aPartFeature->getKind() == PartSetPlugin_Part::ID())) {
1251 aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aPartFeature->firstResult());
1254 if (aPart.get()) { // if this is a part
1255 if (aPart->partDoc() == aMgr->activeDocument()) {
1256 myMenuMgr->activatePartSet();
1264 void PartSet_Module::onViewCreated(ModuleBase_IViewWindow*)
1266 // z layer is created for all started operations in order to visualize operation AIS presentation
1268 Handle(AIS_InteractiveContext) aContext = myWorkshop->viewer()->AISContext();
1269 if (aContext.IsNull())
1272 Handle(V3d_Viewer) aViewer = aContext->CurrentViewer();
1273 if (myVisualLayerId == 0) {
1274 if (myVisualLayerId == 0)
1275 aViewer->AddZLayer(myVisualLayerId);
1277 TColStd_SequenceOfInteger aZList;
1278 aViewer->GetAllZLayers(aZList);
1279 bool aFound = false;
1280 for (int i = 1; i <= aZList.Length(); i++) {
1281 if (aZList(i) == myVisualLayerId) {
1287 aViewer->AddZLayer(myVisualLayerId);
1289 // if there is an active operation with validated widget,
1290 // the filters of this widget should be activated in the created view
1291 ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
1293 ModuleBase_ModelWidget* anActiveWidget = activeWidget();
1294 if (anActiveWidget) {
1295 ModuleBase_WidgetSelector* aWSelector = dynamic_cast<ModuleBase_WidgetSelector*>(anActiveWidget);
1297 aWSelector->activateSelectionAndFilters(true);
1302 //******************************************************
1303 void PartSet_Module::widgetStateChanged(int thePreviousState)
1305 mySketchMgr->widgetStateChanged(thePreviousState);
1308 bool PartSet_Module::processEnter(const std::string& thePreviousAttributeID)
1310 return mySketchReentrantMgr->processEnter(thePreviousAttributeID);
1313 //******************************************************
1314 void PartSet_Module::beforeOperationStopped(ModuleBase_Operation* theOperation)
1316 if (PartSet_SketcherMgr::isSketchOperation(theOperation)) {
1317 mySketchMgr->stopSketch(theOperation);
1321 //******************************************************
1322 GeomShapePtr PartSet_Module::findShape(const AttributePtr& theAttribute)
1324 GeomShapePtr aGeomShape;
1326 ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
1327 if (anOperation && sketchMgr()->isNestedSketchOperation(anOperation)) {
1328 aGeomShape = PartSet_Tools::findShapeBy2DPoint(theAttribute, myWorkshop);
1333 //******************************************************
1334 AttributePtr PartSet_Module::findAttribute(const ObjectPtr& theObject,
1335 const GeomShapePtr& theGeomShape)
1337 AttributePtr anAttribute;
1338 GeomShapePtr aGeomShape = theGeomShape;
1339 if (!aGeomShape.get()) {
1340 // processing shape of result, e.g. sketch circle center is selected, this is a result
1341 // the geom shape is empty, the shape of result should be used
1342 ResultPtr aResult = std::dynamic_pointer_cast<ModelAPI_Result>(theObject);
1343 if (aResult.get()) {
1344 aGeomShape = aResult->shape();
1348 if (aGeomShape.get()) {
1349 TopoDS_Shape aTDSShape = aGeomShape->impl<TopoDS_Shape>();
1350 return PartSet_Tools::findAttributeBy2dPoint(theObject, aTDSShape,
1351 mySketchMgr->activeSketch());
1356 //******************************************************
1357 void PartSet_Module::onChoiceChanged(ModuleBase_ModelWidget* theWidget,
1360 PartSet_WidgetChoice* aChoiceWidget = dynamic_cast<PartSet_WidgetChoice*>(theWidget);
1364 QString aChoiceTitle = aChoiceWidget->getPropertyPanelTitle(theIndex);
1365 if (!aChoiceTitle.isEmpty()) {
1366 ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
1369 ModuleBase_IPropertyPanel* aPanel = aOperation->propertyPanel();
1371 aPanel->setWindowTitle(aChoiceTitle);
1375 //******************************************************
1376 XGUI_Workshop* PartSet_Module::getWorkshop() const
1378 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
1379 return aConnector->workshop();
1382 //******************************************************
1383 void PartSet_Module::setDefaultConstraintShown()
1385 myHasConstraintShown[PartSet_Tools::Geometrical] = true;
1386 myHasConstraintShown[PartSet_Tools::Dimensional] = true;
1387 myHasConstraintShown[PartSet_Tools::Expressions] = false;