1 // Copyright (C) 2014-20xx CEA/DEN, EDF R&D
3 #include "PartSet_Module.h"
4 #include "PartSet_WidgetSketchLabel.h"
5 #include "PartSet_Validators.h"
6 #include "PartSet_Tools.h"
7 #include "PartSet_WidgetPoint2d.h"
8 #include "PartSet_WidgetPoint2dDistance.h"
9 #include "PartSet_WidgetPoint2DFlyout.h"
10 #include "PartSet_WidgetShapeSelector.h"
11 #include "PartSet_WidgetPoint2dAngle.h"
12 #include "PartSet_WidgetMultiSelector.h"
13 #include "PartSet_WidgetEditor.h"
14 #include "PartSet_WidgetFileSelector.h"
15 #include "PartSet_WidgetSketchCreator.h"
16 #include "PartSet_SketcherMgr.h"
17 #include "PartSet_SketcherReetntrantMgr.h"
18 #include "PartSet_MenuMgr.h"
19 #include "PartSet_CustomPrs.h"
20 #include "PartSet_IconFactory.h"
22 #include "PartSet_Filters.h"
23 #include "PartSet_FilterInfinite.h"
25 #include <PartSetPlugin_Remove.h>
26 #include <PartSetPlugin_Part.h>
27 #include <PartSetPlugin_Duplicate.h>
29 #include <ModuleBase_Operation.h>
30 #include <ModuleBase_OperationAction.h>
31 #include <ModuleBase_IViewer.h>
32 #include <ModuleBase_IViewWindow.h>
33 #include <ModuleBase_IPropertyPanel.h>
34 #include <ModuleBase_WidgetEditor.h>
35 #include <ModuleBase_WidgetValidated.h>
36 #include <ModuleBase_FilterFactory.h>
37 #include <ModuleBase_Tools.h>
38 #include <ModuleBase_OperationFeature.h>
40 #include <ModelAPI_Object.h>
41 #include <ModelAPI_Events.h>
42 #include <ModelAPI_Validator.h>
43 #include <ModelAPI_Data.h>
44 #include <ModelAPI_Session.h>
45 #include <ModelAPI_ResultBody.h>
46 #include <ModelAPI_AttributeString.h>
48 #include <GeomDataAPI_Point2D.h>
49 #include <GeomDataAPI_Point.h>
50 #include <GeomDataAPI_Dir.h>
52 #include <XGUI_Displayer.h>
53 #include <XGUI_Workshop.h>
54 #include <XGUI_OperationMgr.h>
55 #include <XGUI_PropertyPanel.h>
56 #include <XGUI_ModuleConnector.h>
57 #include <XGUI_ContextMenuMgr.h>
58 #include <XGUI_Tools.h>
59 #include <XGUI_ObjectsBrowser.h>
60 #include <XGUI_SelectionMgr.h>
61 #include <XGUI_DataModel.h>
62 #include <XGUI_ErrorMgr.h>
64 #include <SketchPlugin_Feature.h>
65 #include <SketchPlugin_Sketch.h>
66 #include <SketchPlugin_ConstraintAngle.h>
67 #include <SketchPlugin_ConstraintLength.h>
68 #include <SketchPlugin_ConstraintDistance.h>
69 #include <SketchPlugin_ConstraintParallel.h>
70 #include <SketchPlugin_ConstraintPerpendicular.h>
71 #include <SketchPlugin_ConstraintRadius.h>
73 #include <SketcherPrs_SymbolPrs.h>
74 #include <SketcherPrs_Tools.h>
76 #include <Events_Loop.h>
77 #include <Config_PropManager.h>
78 #include <Config_Keywords.h>
80 #include <StdSelect_TypeOfFace.hxx>
81 #include <TopoDS_Vertex.hxx>
83 #include <TopoDS_Shape.hxx>
84 #include <BRep_Tool.hxx>
85 #include <AIS_Dimension.hxx>
88 #include <QMouseEvent>
91 #include <QApplication>
92 #include <QMessageBox>
93 #include <QMainWindow>
96 #include <GeomAlgoAPI_FaceBuilder.h>
97 #include <GeomDataAPI_Dir.h>
99 #include <SelectMgr_ListIteratorOfListOfFilter.hxx>
105 /*!Create and return new instance of XGUI_Module*/
106 extern "C" PARTSET_EXPORT ModuleBase_IModule* createModule(ModuleBase_IWorkshop* theWshop)
108 return new PartSet_Module(theWshop);
111 PartSet_Module::PartSet_Module(ModuleBase_IWorkshop* theWshop)
112 : ModuleBase_IModule(theWshop),
113 myVisualLayerId(0), myHasConstraintShown(true)
115 new PartSet_IconFactory();
117 mySketchMgr = new PartSet_SketcherMgr(this);
118 mySketchReentrantMgr = new PartSet_SketcherReetntrantMgr(theWshop);
120 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(theWshop);
121 XGUI_Workshop* aWorkshop = aConnector->workshop();
123 XGUI_OperationMgr* anOpMgr = aWorkshop->operationMgr();
124 connect(anOpMgr, SIGNAL(operationActivatedByPreselection()),
125 this, SLOT(onOperationActivatedByPreselection()));
127 ModuleBase_IViewer* aViewer = theWshop->viewer();
128 connect(aViewer, SIGNAL(keyRelease(ModuleBase_IViewWindow*, QKeyEvent*)),
129 this, SLOT(onKeyRelease(ModuleBase_IViewWindow*, QKeyEvent*)));
130 connect(aViewer, SIGNAL(viewTransformed(int)),
131 SLOT(onViewTransformed(int)));
132 connect(aViewer, SIGNAL(viewCreated(ModuleBase_IViewWindow*)),
133 SLOT(onViewCreated(ModuleBase_IViewWindow*)));
135 myMenuMgr = new PartSet_MenuMgr(this);
136 myCustomPrs = new PartSet_CustomPrs(theWshop);
138 Events_Loop* aLoop = Events_Loop::loop();
139 aLoop->registerListener(this, Events_Loop::eventByName(EVENT_DOCUMENT_CHANGED));
141 mySelectionFilters.Append(new PartSet_GlobalFilter(myWorkshop));
142 mySelectionFilters.Append(new PartSet_FilterInfinite(myWorkshop));
145 PartSet_Module::~PartSet_Module()
147 SelectMgr_ListIteratorOfListOfFilter aIt(mySelectionFilters);
148 for (; aIt.More(); aIt.Next()) {
149 Handle(SelectMgr_Filter) aFilter = aIt.Value();
150 if (!aFilter.IsNull())
156 void PartSet_Module::activateSelectionFilters()
158 SelectMgr_ListIteratorOfListOfFilter aIt(mySelectionFilters);
159 for (; aIt.More(); aIt.Next()) {
160 Handle(SelectMgr_Filter) aFilter = aIt.Value();
161 if (!aFilter.IsNull())
162 myWorkshop->viewer()->addSelectionFilter(aFilter);
166 void PartSet_Module::deactivateSelectionFilters()
168 SelectMgr_ListIteratorOfListOfFilter aIt(mySelectionFilters);
169 for (; aIt.More(); aIt.Next()) {
170 Handle(SelectMgr_Filter) aFilter = aIt.Value();
171 if (!aFilter.IsNull())
172 myWorkshop->viewer()->removeSelectionFilter(aFilter);
176 void PartSet_Module::registerValidators()
178 //Registering of validators
179 SessionPtr aMgr = ModelAPI_Session::get();
180 ModelAPI_ValidatorsFactory* aFactory = aMgr->validators();
181 aFactory->registerValidator("PartSet_DistanceSelection", new PartSet_DistanceSelection);
182 aFactory->registerValidator("PartSet_LengthSelection", new PartSet_LengthSelection);
183 aFactory->registerValidator("PartSet_PerpendicularSelection", new PartSet_PerpendicularSelection);
184 aFactory->registerValidator("PartSet_ParallelSelection", new PartSet_ParallelSelection);
185 aFactory->registerValidator("PartSet_RadiusSelection", new PartSet_RadiusSelection);
186 aFactory->registerValidator("PartSet_RigidSelection", new PartSet_RigidSelection);
187 aFactory->registerValidator("PartSet_CoincidentSelection", new PartSet_CoincidentSelection);
188 aFactory->registerValidator("PartSet_HVDirSelection", new PartSet_HVDirSelection);
189 aFactory->registerValidator("PartSet_TangentSelection", new PartSet_TangentSelection);
190 aFactory->registerValidator("PartSet_FilletSelection", new PartSet_FilletSelection);
191 aFactory->registerValidator("PartSet_AngleSelection", new PartSet_AngleSelection);
192 aFactory->registerValidator("PartSet_EqualSelection", new PartSet_EqualSelection);
193 aFactory->registerValidator("PartSet_DifferentObjects", new PartSet_DifferentObjectsValidator);
194 aFactory->registerValidator("PartSet_CoincidentAttr", new PartSet_CoincidentAttr);
195 aFactory->registerValidator("PartSet_SketchEntityValidator", new PartSet_SketchEntityValidator);
198 void PartSet_Module::registerFilters()
200 //Registering of selection filters
201 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
202 ModuleBase_FilterFactory* aFactory = aConnector->selectionFilters();
205 void PartSet_Module::registerProperties()
207 Config_PropManager::registerProp("Sketch planes", "planes_size", "Size", Config_Prop::Double,
209 Config_PropManager::registerProp("Sketch planes", "planes_thickness", "Thickness",
210 Config_Prop::Integer, SKETCH_WIDTH);
211 Config_PropManager::registerProp("Sketch planes", "rotate_to_plane", "Rotate to plane when selected",
212 Config_Prop::Boolean, "false");
215 void PartSet_Module::connectToPropertyPanel(ModuleBase_ModelWidget* theWidget, const bool isToConnect)
217 mySketchMgr->connectToPropertyPanel(theWidget, isToConnect);
220 void PartSet_Module::operationCommitted(ModuleBase_Operation* theOperation)
222 if (PartSet_SketcherMgr::isNestedSketchOperation(theOperation)) {
223 mySketchMgr->commitNestedSketch(theOperation);
226 /// Restart sketcher operations automatically
227 if (!mySketchReentrantMgr->operationCommitted(theOperation)) {
228 // the selection is cleared after commit the create operation
229 // in order to do not use the same selected objects in the restarted operation
230 // for common behaviour, the selection is cleared even if the operation is not restarted
231 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
232 XGUI_Workshop* aWorkshop = aConnector->workshop();
233 aWorkshop->selector()->clearSelection();
237 void PartSet_Module::operationAborted(ModuleBase_Operation* theOperation)
239 /// Restart sketcher operations automatically
240 mySketchReentrantMgr->operationAborted(theOperation);
243 void PartSet_Module::operationStarted(ModuleBase_Operation* theOperation)
245 /// Restart sketcher operations automatically
246 mySketchReentrantMgr->operationStarted(theOperation);
248 if (PartSet_SketcherMgr::isSketchOperation(theOperation)) {
249 mySketchMgr->startSketch(theOperation);
251 else if (PartSet_SketcherMgr::isNestedSketchOperation(theOperation)) {
252 mySketchMgr->startNestedSketch(theOperation);
255 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>(theOperation);
257 myCustomPrs->activate(aFOperation->feature(), true);
260 void PartSet_Module::operationResumed(ModuleBase_Operation* theOperation)
262 ModuleBase_IModule::operationResumed(theOperation);
264 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>(theOperation);
266 myCustomPrs->activate(aFOperation->feature(), true);
269 void PartSet_Module::operationStopped(ModuleBase_Operation* theOperation)
271 bool isModified = myCustomPrs->deactivate(false);
273 if (PartSet_SketcherMgr::isSketchOperation(theOperation)) {
274 mySketchMgr->stopSketch(theOperation);
276 else if (PartSet_SketcherMgr::isNestedSketchOperation(theOperation)) {
277 mySketchMgr->stopNestedSketch(theOperation);
280 //VSV: Viewer is updated on feature update and redisplay
282 // XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(myWorkshop);
283 // XGUI_Displayer* aDisplayer = aConnector->workshop()->displayer();
284 // aDisplayer->updateViewer();
286 mySketchMgr->onShowConstraintsToggle(myHasConstraintShown);
289 ModuleBase_Operation* PartSet_Module::currentOperation() const
291 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
292 XGUI_OperationMgr* anOpMgr = aConnector->workshop()->operationMgr();
293 return anOpMgr->currentOperation();
296 bool PartSet_Module::canUndo() const
298 bool aCanUndo = false;
299 SessionPtr aMgr = ModelAPI_Session::get();
300 if (aMgr->hasModuleDocument() && aMgr->canUndo()) {
301 aCanUndo = !aMgr->isOperation();
302 if (!aCanUndo) // check the enable state additionally by sketch manager
303 aCanUndo = aMgr->canUndo();
308 bool PartSet_Module::canRedo() const
310 bool aCanRedo = false;
311 SessionPtr aMgr = ModelAPI_Session::get();
312 if (aMgr->hasModuleDocument() && aMgr->canRedo()) {
313 aCanRedo = !aMgr->isOperation();
314 if (!aCanRedo) // check the enable state additionally by sketch manager
315 aCanRedo = aMgr->canRedo();
320 bool PartSet_Module::canApplyAction(const ObjectPtr& theObject, const QString& theActionId) const
323 if (theActionId == "DELETE_CMD" || theActionId == "MOVE_CMD") {
324 FeaturePtr aFeature = ModelAPI_Feature::feature(theObject);
326 // part features are removed in the PartSet module only.
327 if (aFeature->getKind() == PartSetPlugin_Part::ID())
334 bool PartSet_Module::canEraseObject(const ObjectPtr& theObject) const
336 // the sketch manager put the restriction to the objects erase
337 return mySketchMgr->canEraseObject(theObject);
340 bool PartSet_Module::canDisplayObject(const ObjectPtr& theObject) const
342 // the sketch manager put the restriction to the objects display
343 return mySketchMgr->canDisplayObject(theObject);
346 bool PartSet_Module::canActivateSelection(const ObjectPtr& theObject) const
348 bool aCanActivate = ModuleBase_IModule::canActivateSelection(theObject);
350 ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
351 bool isSketchOp = PartSet_SketcherMgr::isSketchOperation(anOperation),
352 isNestedOp = PartSet_SketcherMgr::isNestedSketchOperation(anOperation);
353 if (isSketchOp || isNestedOp) {
354 // in active sketch operation it is possible to activate operation object in selection
355 // in the edit operation, e.g. points of the line can be moved when the line is edited
356 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>(anOperation);
357 aCanActivate = aCanActivate || (aFOperation && aFOperation->isEditOperation());
362 bool PartSet_Module::addViewerMenu(QMenu* theMenu, const QMap<QString, QAction*>& theStdActions) const
364 return myMenuMgr->addViewerMenu(theMenu, theStdActions);
367 void PartSet_Module::updateViewerMenu(const QMap<QString, QAction*>& theStdActions)
369 myMenuMgr->updateViewerMenu(theStdActions);
372 QString PartSet_Module::getFeatureError(const FeaturePtr& theFeature, const bool isCheckGUI)
374 QString anError = ModuleBase_IModule::getFeatureError(theFeature, isCheckGUI);
375 if (anError.isEmpty())
376 anError = sketchMgr()->getFeatureError(theFeature, isCheckGUI);
381 void PartSet_Module::grantedOperationIds(ModuleBase_Operation* theOperation,
382 QStringList& theIds) const
384 myMenuMgr->grantedOperationIds(theOperation, theIds);
386 if (PartSet_SketcherMgr::isSketchOperation(theOperation)) {
387 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
388 XGUI_Workshop* aWorkshop = aConnector->workshop();
390 theIds.append(aWorkshop->contextMenuMgr()->action("DELETE_CMD")->text());
394 void PartSet_Module::activeSelectionModes(QIntList& theModes)
397 if (mySketchMgr->activeSketch().get())
398 PartSet_SketcherMgr::sketchSelectionModes(theModes);
401 bool PartSet_Module::isMouseOverWindow()
403 return mySketchMgr->isMouseOverWindow();
406 void PartSet_Module::closeDocument()
411 void PartSet_Module::clearViewer()
413 myCustomPrs->clearPrs();
415 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(myWorkshop);
416 XGUI_Workshop* aWorkshop = aConnector->workshop();
417 XGUI_Displayer* aDisplayer = aWorkshop->displayer();
418 aDisplayer->deactivateSelectionFilters();
421 void PartSet_Module::propertyPanelDefined(ModuleBase_Operation* theOperation)
423 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>(theOperation);
427 ModuleBase_IPropertyPanel* aPanel = aFOperation->propertyPanel();
428 // we have to manually activate the sketch label in edit mode
429 if (PartSet_SketcherMgr::isSketchOperation(aFOperation) && (aFOperation->isEditOperation()))
430 aPanel->activateWidget(aPanel->modelWidgets().first());
434 void PartSet_Module::onSelectionChanged()
436 ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
440 bool isSketcherOp = false;
441 // An edit operation is enable only if the current opeation is the sketch operation
442 if (mySketchMgr->activeSketch()) {
443 if (PartSet_Tools::sketchPlane(mySketchMgr->activeSketch()))
444 isSketcherOp = PartSet_SketcherMgr::isSketchOperation(aOperation);
447 // Editing of constraints can be done on selection
448 ModuleBase_ISelection* aSelect = myWorkshop->selection();
449 QList<ModuleBase_ViewerPrs> aSelected = aSelect->getSelected();
450 if (aSelected.size() == 1) {
451 ModuleBase_ViewerPrs aPrs = aSelected.first();
452 ObjectPtr aObject = aPrs.object();
453 FeaturePtr aFeature = ModelAPI_Feature::feature(aObject);
455 std::string aId = aFeature->getKind();
456 if ((aId == SketchPlugin_ConstraintRadius::ID()) ||
457 (aId == SketchPlugin_ConstraintLength::ID()) ||
458 (aId == SketchPlugin_ConstraintDistance::ID()) ||
459 (aId == SketchPlugin_ConstraintAngle::ID())) {
460 editFeature(aFeature);
467 void PartSet_Module::onKeyRelease(ModuleBase_IViewWindow* theWnd, QKeyEvent* theEvent)
469 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
470 XGUI_OperationMgr* anOpMgr = aConnector->workshop()->operationMgr();
471 anOpMgr->onKeyReleased(theEvent);
474 void PartSet_Module::onOperationActivatedByPreselection()
476 if (!mySketchReentrantMgr->canBeCommittedByPreselection())
479 ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
480 if(anOperation && PartSet_SketcherMgr::isNestedSketchOperation(anOperation)) {
481 // Set final definitions if they are necessary
482 //propertyPanelDefined(aOperation);
484 /// Commit sketcher operations automatically
485 anOperation->commit();
489 ModuleBase_ModelWidget* PartSet_Module::createWidgetByType(const std::string& theType, QWidget* theParent,
490 Config_WidgetAPI* theWidgetApi, std::string theParentId)
492 ModuleBase_IWorkshop* aWorkshop = workshop();
493 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(aWorkshop);
494 XGUI_Workshop* aXUIWorkshop = aConnector->workshop();
495 ModuleBase_ModelWidget* aWgt = NULL;
496 if (theType == "sketch-start-label") {
497 PartSet_WidgetSketchLabel* aLabelWgt = new PartSet_WidgetSketchLabel(theParent, aWorkshop,
498 theWidgetApi, theParentId, mySketchMgr->isConstraintsShown());
499 connect(aLabelWgt, SIGNAL(planeSelected(const std::shared_ptr<GeomAPI_Pln>&)),
500 mySketchMgr, SLOT(onPlaneSelected(const std::shared_ptr<GeomAPI_Pln>&)));
501 connect(aLabelWgt, SIGNAL(showConstraintToggled(bool)),
502 mySketchMgr, SLOT(onShowConstraintsToggle(bool)));
504 } else if (theType == "sketch-2dpoint_selector") {
505 PartSet_WidgetPoint2D* aPointWgt = new PartSet_WidgetPoint2D(theParent, aWorkshop,
506 theWidgetApi, theParentId);
507 aPointWgt->setSketch(mySketchMgr->activeSketch());
508 connect(aPointWgt, SIGNAL(vertexSelected()), sketchReentranceMgr(), SLOT(onVertexSelected()));
510 } else if (theType == "sketch-2dpoint_flyout_selector") {
511 PartSet_WidgetPoint2DFlyout* aPointWgt = new PartSet_WidgetPoint2DFlyout(theParent, aWorkshop,
512 theWidgetApi, theParentId);
513 aPointWgt->setSketch(mySketchMgr->activeSketch());
514 connect(aPointWgt, SIGNAL(vertexSelected()), sketchReentranceMgr(), SLOT(onVertexSelected()));
516 } else if (theType == "point2ddistance") {
517 PartSet_WidgetPoint2dDistance* aDistanceWgt = new PartSet_WidgetPoint2dDistance(theParent,
518 aWorkshop, theWidgetApi, theParentId);
519 aDistanceWgt->setSketch(mySketchMgr->activeSketch());
521 } else if(theType == "point2dangle") {
522 PartSet_WidgetPoint2dAngle* anAngleWgt = new PartSet_WidgetPoint2dAngle(theParent,
523 aWorkshop, theWidgetApi, theParentId);
524 anAngleWgt->setSketch(mySketchMgr->activeSketch());
526 } else if (theType == "sketch_shape_selector") {
527 PartSet_WidgetShapeSelector* aShapeSelectorWgt =
528 new PartSet_WidgetShapeSelector(theParent, aWorkshop, theWidgetApi, theParentId);
529 aShapeSelectorWgt->setSketcher(mySketchMgr->activeSketch());
530 aWgt = aShapeSelectorWgt;
531 } else if (theType == "sketch_multi_selector") {
532 PartSet_WidgetMultiSelector* aShapeSelectorWgt =
533 new PartSet_WidgetMultiSelector(theParent, aWorkshop, theWidgetApi, theParentId);
534 aShapeSelectorWgt->setSketcher(mySketchMgr->activeSketch());
535 aWgt = aShapeSelectorWgt;
536 } else if (theType == WDG_DOUBLEVALUE_EDITOR) {
537 aWgt = new PartSet_WidgetEditor(theParent, aWorkshop, theWidgetApi, theParentId);
538 } else if (theType == "export_file_selector") {
539 aWgt = new PartSet_WidgetFileSelector(theParent, aWorkshop, theWidgetApi, theParentId);
540 } else if (theType == "sketch_launcher") {
541 aWgt = new PartSet_WidgetSketchCreator(theParent, this, theWidgetApi, theParentId);
546 ModuleBase_ModelWidget* PartSet_Module::activeWidget() const
548 ModuleBase_ModelWidget* anActiveWidget = 0;
550 anActiveWidget = mySketchReentrantMgr->internalActiveWidget();
551 if (!anActiveWidget) {
552 ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
554 ModuleBase_IPropertyPanel* aPanel = aOperation->propertyPanel();
555 anActiveWidget = aPanel->activeWidget();
558 return anActiveWidget;
561 bool PartSet_Module::deleteObjects()
563 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
564 XGUI_Workshop* aWorkshop = aConnector->workshop();
565 XGUI_OperationMgr* anOpMgr = aWorkshop->operationMgr();
567 //SessionPtr aMgr = ModelAPI_Session::get();
568 // 1. check whether the delete should be processed in the module
569 ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
570 bool isSketchOp = PartSet_SketcherMgr::isSketchOperation(anOperation),
571 isNestedOp = PartSet_SketcherMgr::isNestedSketchOperation(anOperation);
572 if (isSketchOp || isNestedOp) {
573 // 2. find selected presentations
574 // selected objects should be collected before the current operation abort because
575 // the abort leads to selection lost on constraint objects. It can be corrected after #386 issue
576 ModuleBase_ISelection* aSel = workshop()->selection();
577 QObjectPtrList aSelectedObj = aSel->selectedPresentations();
578 // if there are no selected objects in the viewer, that means that the selection in another
579 // place cased this method. It is necessary to return the false value to understande in above
580 // method that delete is not processed
581 if (aSelectedObj.count() == 0)
584 // avoid delete of the objects, which are not belong to the current sketch
585 // in order to do not delete results of other sketches
586 QObjectPtrList aSketchObjects;
587 QObjectPtrList::const_iterator anIt = aSelectedObj.begin(), aLast = aSelectedObj.end();
588 for ( ; anIt != aLast; anIt++) {
589 ObjectPtr anObject = *anIt;
590 if (mySketchMgr->isObjectOfSketch(anObject)) {
591 // sketch feature should be used in this list because workshop deletes features only
592 // results are skipped
593 FeaturePtr aSketchFeature = ModelAPI_Feature::feature(anObject);
594 aSketchObjects.append(aSketchFeature);
597 // if the selection contains only local selected presentations from other sketches,
598 // the Delete operation should not be done at all
599 if (aSketchObjects.size() == 0)
602 // 3. start operation
603 QString aDescription = aWorkshop->contextMenuMgr()->action("DELETE_CMD")->text();
604 ModuleBase_OperationAction* anOpAction = new ModuleBase_OperationAction(aDescription, this);
606 // the active nested sketch operation should be aborted unconditionally
607 // the Delete action should be additionally granted for the Sketch operation
608 // in order to do not abort/commit it
609 if (!anOpMgr->canStartOperation(anOpAction->id()))
610 return true; // the objects are processed but can not be deleted
612 anOpMgr->startOperation(anOpAction);
614 // 4. delete features
615 // sketch feature should be skipped, only sub-features can be removed
616 // when sketch operation is active
617 aWorkshop->deleteFeatures(aSketchObjects);
619 anOpMgr->commitOperation();
622 bool isPartRemoved = false;
623 // Delete part with help of PartSet plugin
624 // TODO: the deleted objects has to be processed by multiselection
625 QObjectPtrList aObjects = myWorkshop->selection()->selectedObjects();
626 if (aObjects.size() == 1) {
627 ObjectPtr aObj = aObjects.first();
628 FeaturePtr aFeature = std::dynamic_pointer_cast<ModelAPI_Feature>(aObj);
629 if (aFeature.get() && (aFeature->getKind() == PartSetPlugin_Part::ID())) {
630 // Remove feature should be created in the document of the part results
631 ResultPtr aPartResult = aFeature->firstResult();
632 if (aPartResult.get()) {
633 std::shared_ptr<ModelAPI_ResultPart> aPart =
634 std::dynamic_pointer_cast<ModelAPI_ResultPart>(aPartResult);
635 DocumentPtr aPartDoc = aPart->partDoc();
636 if (aPartDoc.get()) {
637 ModuleBase_OperationAction* anOpAction = new ModuleBase_OperationAction
638 (PartSetPlugin_Remove::ID().c_str(), this);
639 if (!anOpMgr->canStartOperation(anOpAction->id()))
640 return true; // the objects are processed but can not be deleted
642 anOpMgr->startOperation(anOpAction);
644 FeaturePtr aFeature = aPartDoc->addFeature(PartSetPlugin_Remove::ID());
647 anOpMgr->commitOperation();
648 isPartRemoved = true;
653 return isPartRemoved;
658 void PartSet_Module::onFeatureTriggered()
660 QAction* aCmd = dynamic_cast<QAction*>(sender());
661 if (aCmd->isCheckable() && aCmd->isChecked()) {
662 // 1. check whether the delete should be processed in the module
663 ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
664 bool isNestedOp = PartSet_SketcherMgr::isNestedCreateOperation(anOperation);
666 // in case if in the viewer nothing is displayed, the create operation should not be
667 // comitted even if all values of the feature are initialized
668 if (!mySketchMgr->canDisplayCurrentCreatedFeature()) {
669 // the action information should be saved before the operation is aborted
670 // because this abort leads to update command status, which unchecks this action
671 anOperation->abort();
672 launchOperation(aCmd->data().toString());
676 ModuleBase_IModule::onFeatureTriggered();
679 void PartSet_Module::launchOperation(const QString& theCmdId)
681 if (PartSet_SketcherMgr::constraintsIdList().contains(theCmdId)) {
682 // Show constraints if a constraint was anOperation
683 myHasConstraintShown = mySketchMgr->isConstraintsShown();
684 mySketchMgr->onShowConstraintsToggle(true);
686 ModuleBase_IModule::launchOperation(theCmdId);
690 void PartSet_Module::onObjectDisplayed(ObjectPtr theObject, AISObjectPtr theAIS)
692 Handle(AIS_InteractiveObject) anAIS = theAIS->impl<Handle(AIS_InteractiveObject)>();
693 if (!anAIS.IsNull()) {
694 Handle(AIS_InteractiveContext) aCtx = anAIS->GetContext();
695 Handle(AIS_Dimension) aDim = Handle(AIS_Dimension)::DownCast(anAIS);
696 if (!aDim.IsNull()) {
697 aCtx->SetZLayer(aDim, myVisualLayerId);
699 Handle(SketcherPrs_SymbolPrs) aCons = Handle(SketcherPrs_SymbolPrs)::DownCast(anAIS);
701 aCtx->SetZLayer(aCons, myVisualLayerId);
706 void PartSet_Module::onBeforeObjectErase(ObjectPtr theObject, AISObjectPtr theAIS)
709 // it should be recomputed in order to disappear in the viewer if the corresponded object
711 //if (myCustomPrs->isActive())
712 // myCustomPrs->redisplay(theObject, false);
715 void PartSet_Module::onViewTransformed(int theTrsfType)
717 // Set length of arrows constant in pixel size
718 // if the operation is panning or rotate or panglobal then do nothing
719 if ((theTrsfType == 1) || (theTrsfType == 3) || (theTrsfType == 4))
721 ModuleBase_IViewer* aViewer = myWorkshop->viewer();
722 Handle(AIS_InteractiveContext) aContext = aViewer->AISContext();
723 if (aContext.IsNull())
726 //Handle(V3d_View) aView = aViewer->activeView();
728 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(myWorkshop);
729 XGUI_Workshop* aWorkshop = aConnector->workshop();
730 XGUI_Displayer* aDisplayer = aWorkshop->displayer();
731 Handle(V3d_Viewer) aV3dViewer = aContext->CurrentViewer();
732 Handle(V3d_View) aView;
734 for (aV3dViewer->InitDefinedViews();
735 aV3dViewer->MoreDefinedViews();
736 aV3dViewer->NextDefinedViews()) {
737 Handle(V3d_View) aV = aV3dViewer->DefinedView();
738 double aS = aV->Scale();
746 double aLen = aView->Convert(20);
748 double aPrevLen = SketcherPrs_Tools::getArrowSize();
749 SketcherPrs_Tools::setArrowSize(aLen);
750 const double aPrevScale = aViewer->Scale(aViewer->activeView());
751 const double aCurScale = aViewer->activeView()->Camera()->Scale();
752 aViewer->SetScale(aViewer->activeView(), aCurScale);
753 SketcherPrs_Tools::setTextHeight (aCurScale / aPrevScale * SketcherPrs_Tools::getTextHeight());
754 bool isModified = false;
755 QList<AISObjectPtr> aPrsList = aDisplayer->displayedPresentations();
756 foreach (AISObjectPtr aAIS, aPrsList) {
757 Handle(AIS_InteractiveObject) aAisObj = aAIS->impl<Handle(AIS_InteractiveObject)>();
759 Handle(AIS_Dimension) aDim = Handle(AIS_Dimension)::DownCast(aAisObj);
760 if (!aDim.IsNull()) {
761 aDim->DimensionAspect()->ArrowAspect()->SetLength(aLen);
762 aContext->Redisplay(aDim, false);
767 aDisplayer->updateViewer();
770 bool PartSet_Module::customizeObject(ObjectPtr theObject, const bool theUpdateViewer)
772 bool isRedisplayed = false;
773 if (myCustomPrs->isActive())
774 isRedisplayed = myCustomPrs->redisplay(theObject, theUpdateViewer);
776 return isRedisplayed;
779 void PartSet_Module::customizeObjectBrowser(QWidget* theObjectBrowser)
781 XGUI_ObjectsBrowser* aOB = dynamic_cast<XGUI_ObjectsBrowser*>(theObjectBrowser);
783 QLineEdit* aLabel = aOB->activeDocLabel();
784 connect(aLabel, SIGNAL(customContextMenuRequested(const QPoint&)),
785 SLOT(onActiveDocPopup(const QPoint&)));
786 //QPalette aPalet = aLabel->palette();
787 //aPalet.setColor(QPalette::Text, QColor(0, 72, 140));
788 //aLabel->setPalette(aPalet);
789 aOB->treeView()->setExpandsOnDoubleClick(false);
790 connect(aOB->treeView(), SIGNAL(doubleClicked(const QModelIndex&)),
791 SLOT(onTreeViewDoubleClick(const QModelIndex&)));
795 void PartSet_Module::onActiveDocPopup(const QPoint& thePnt)
797 SessionPtr aMgr = ModelAPI_Session::get();
798 QAction* aActivatePartAction = myMenuMgr->action("ACTIVATE_PARTSET_CMD");
800 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(myWorkshop);
801 XGUI_Workshop* aWorkshop = aConnector->workshop();
802 QLineEdit* aHeader = aWorkshop->objectBrowser()->activeDocLabel();
804 aActivatePartAction->setEnabled((aMgr->activeDocument() != aMgr->moduleDocument()));
807 aMenu.addAction(aActivatePartAction);
808 aMenu.exec(aHeader->mapToGlobal(thePnt));
812 ObjectPtr PartSet_Module::findPresentedObject(const AISObjectPtr& theAIS) const
815 ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
817 /// If last line finished on vertex the lines creation sequence has to be break
818 ModuleBase_IPropertyPanel* aPanel = aOperation->propertyPanel();
819 ModuleBase_ModelWidget* anActiveWidget = aPanel->activeWidget();
820 // if there is an active widget, find the presented object in it
822 anActiveWidget = aPanel->preselectionWidget();
824 ModuleBase_WidgetValidated* aWidgetValidated = dynamic_cast<ModuleBase_WidgetValidated*>
826 if (aWidgetValidated)
827 anObject = aWidgetValidated->findPresentedObject(theAIS);
832 void PartSet_Module::addObjectBrowserMenu(QMenu* theMenu) const
834 QObjectPtrList aObjects = myWorkshop->selection()->selectedObjects();
835 int aSelected = aObjects.size();
836 SessionPtr aMgr = ModelAPI_Session::get();
837 QAction* aActivatePartAction = myMenuMgr->action("ACTIVATE_PART_CMD");
839 ModuleBase_Operation* aCurrentOp = myWorkshop->currentOperation();
840 if (aSelected == 1) {
841 bool hasResult = false;
842 bool hasFeature = false;
843 bool hasParameter = false;
844 bool hasSubFeature = false;
845 ModuleBase_Tools::checkObjects(aObjects, hasResult, hasFeature, hasParameter, hasSubFeature);
847 ObjectPtr aObject = aObjects.first();
849 ResultPartPtr aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aObject);
850 FeaturePtr aFeature = std::dynamic_pointer_cast<ModelAPI_Feature>(aObject);
851 bool isPart = aPart.get() ||
852 (aFeature.get() && (aFeature->getKind() == PartSetPlugin_Part::ID()));
854 DocumentPtr aPartDoc;
856 aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aFeature->firstResult());
858 if (aPart.get()) // this may be null is Part feature is disabled
859 aPartDoc = aPart->partDoc();
861 theMenu->addAction(aActivatePartAction);
862 aActivatePartAction->setEnabled((aMgr->activeDocument() != aPartDoc));
864 } else if (aObject->document() == aMgr->activeDocument()) {
865 if (hasParameter || hasFeature) {
866 myMenuMgr->action("EDIT_CMD")->setEnabled(true);
867 theMenu->addAction(myMenuMgr->action("EDIT_CMD"));
868 if (aCurrentOp && aFeature.get()) {
869 if (aCurrentOp->id().toStdString() == aFeature->getKind())
870 myMenuMgr->action("EDIT_CMD")->setEnabled(false);
875 ResultBodyPtr aResult = std::dynamic_pointer_cast<ModelAPI_ResultBody>(aObject);
877 theMenu->addAction(myMenuMgr->action("SELECT_PARENT_CMD"));
880 bool aNotDeactivate = (aCurrentOp == 0);
881 if (!aNotDeactivate) {
882 aActivatePartAction->setEnabled(false);
886 void PartSet_Module::processEvent(const std::shared_ptr<Events_Message>& theMessage)
888 if (theMessage->eventID() == Events_Loop::loop()->eventByName(EVENT_DOCUMENT_CHANGED)) {
889 // Do not change activation of parts if an operation active
890 static QStringList aAllowActivationList;
891 if (aAllowActivationList.isEmpty())
892 aAllowActivationList <<
893 QString(PartSetPlugin_Part::ID().c_str()) <<
894 QString(PartSetPlugin_Duplicate::ID().c_str()) <<
895 QString(PartSetPlugin_Remove::ID().c_str());
896 if (myWorkshop->currentOperation() &&
897 (!aAllowActivationList.contains(myWorkshop->currentOperation()->id())))
899 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(myWorkshop);
900 XGUI_Workshop* aWorkshop = aConnector->workshop();
901 XGUI_DataTree* aTreeView = aWorkshop->objectBrowser()->treeView();
902 QLineEdit* aLabel = aWorkshop->objectBrowser()->activeDocLabel();
903 QPalette aPalet = aLabel->palette();
905 SessionPtr aMgr = ModelAPI_Session::get();
906 DocumentPtr aActiveDoc = aMgr->activeDocument();
907 if (aActivePartIndex.isValid())
908 aTreeView->setExpanded(aActivePartIndex, false);
909 XGUI_DataModel* aDataModel = aWorkshop->objectBrowser()->dataModel();
910 aActivePartIndex = aDataModel->documentRootIndex(aActiveDoc);
911 if (aActivePartIndex.isValid())
912 aTreeView->setExpanded(aActivePartIndex, true);
914 aLabel->setPalette(aPalet);
915 aWorkshop->updateCommandStatus();
917 // Update displayed objects in order to update active color
918 XGUI_Displayer* aDisplayer = aWorkshop->displayer();
919 QObjectPtrList aObjects = aDisplayer->displayedObjects();
921 foreach(ObjectPtr aObj, aObjects) {
922 //TODO: replace by redisplay event.
923 aHidden = !aObj->data() || !aObj->data()->isValid() ||
924 aObj->isDisabled() || (!aObj->isDisplayed());
926 aDisplayer->redisplay(aObj, false);
928 aDisplayer->updateViewer();
932 void PartSet_Module::onTreeViewDoubleClick(const QModelIndex& theIndex)
934 if (myWorkshop->currentOperation()) // Do not change activation of parts if an operation active
936 SessionPtr aMgr = ModelAPI_Session::get();
937 if (!theIndex.isValid()) {
938 aMgr->setActiveDocument(aMgr->moduleDocument());
941 if (theIndex.column() != 0) // Use only first column
944 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(myWorkshop);
945 XGUI_Workshop* aWorkshop = aConnector->workshop();
946 XGUI_DataModel* aDataModel = aWorkshop->objectBrowser()->dataModel();
947 // De not use non editable Indexes
948 if ((aDataModel->flags(theIndex) & Qt::ItemIsSelectable) == 0)
950 ObjectPtr aObj = aDataModel->object(theIndex);
952 ResultPartPtr aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aObj);
953 if (!aPart.get()) { // Probably this is Feature
954 FeaturePtr aPartFeature = std::dynamic_pointer_cast<ModelAPI_Feature>(aObj);
955 if (aPartFeature.get() && (aPartFeature->getKind() == PartSetPlugin_Part::ID())) {
956 aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aPartFeature->firstResult());
959 if (aPart.get()) { // if this is a part
960 if (aPart->partDoc() == aMgr->activeDocument()) {
961 myMenuMgr->activatePartSet();
969 void PartSet_Module::onViewCreated(ModuleBase_IViewWindow*)
971 // z layer is created for all started operations in order to visualize operation AIS presentation
973 Handle(AIS_InteractiveContext) aContext = myWorkshop->viewer()->AISContext();
974 if (aContext.IsNull())
977 Handle(V3d_Viewer) aViewer = aContext->CurrentViewer();
978 if (myVisualLayerId == 0) {
979 if (myVisualLayerId == 0)
980 aViewer->AddZLayer(myVisualLayerId);
982 TColStd_SequenceOfInteger aZList;
983 aViewer->GetAllZLayers(aZList);
985 for (int i = 1; i <= aZList.Length(); i++) {
986 if (aZList(i) == myVisualLayerId) {
992 aViewer->AddZLayer(myVisualLayerId);
994 // if there is an active operation with validated widget,
995 // the filters of this widget should be activated in the created view
996 ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
998 ModuleBase_ModelWidget* anActiveWidget = activeWidget();
999 if (anActiveWidget) {
1000 ModuleBase_WidgetSelector* aWSelector = dynamic_cast<ModuleBase_WidgetSelector*>(anActiveWidget);
1002 aWSelector->activateSelectionAndFilters(true);
1007 //******************************************************
1008 void PartSet_Module::widgetStateChanged(int thePreviousState)
1010 mySketchMgr->widgetStateChanged(thePreviousState);
1013 bool PartSet_Module::processEnter(const std::string& thePreviousAttributeID)
1015 return mySketchReentrantMgr->processEnter(thePreviousAttributeID);