1 // Copyright (C) 2014-20xx CEA/DEN, EDF R&D
3 #include "PartSet_Module.h"
4 #include "PartSet_WidgetSketchLabel.h"
5 #include "PartSet_Validators.h"
6 #include "PartSet_Tools.h"
7 #include "PartSet_PreviewPlanes.h"
8 #include "PartSet_WidgetPoint2d.h"
9 #include "PartSet_WidgetPoint2DFlyout.h"
10 #include "PartSet_WidgetShapeSelector.h"
11 #include "PartSet_WidgetMultiSelector.h"
12 #include "PartSet_WidgetSubShapeSelector.h"
13 #include "PartSet_WidgetFeaturePointSelector.h"
14 #include "PartSet_WidgetEditor.h"
15 #include "PartSet_WidgetFileSelector.h"
16 #include "PartSet_WidgetSketchCreator.h"
17 #include "PartSet_SketcherMgr.h"
18 #include "PartSet_SketcherReentrantMgr.h"
19 #include "PartSet_ResultSketchPrs.h"
20 #include "PartSet_MenuMgr.h"
21 #include "PartSet_CustomPrs.h"
22 #include "PartSet_IconFactory.h"
23 #include "PartSet_WidgetChoice.h"
24 #include "PartSet_OverconstraintListener.h"
26 #include "PartSet_Filters.h"
27 #include "PartSet_FilterInfinite.h"
29 #include <PartSetPlugin_Remove.h>
30 #include <PartSetPlugin_Part.h>
31 #include <PartSetPlugin_Duplicate.h>
33 #include <ModuleBase_Operation.h>
34 #include <ModuleBase_OperationAction.h>
35 #include <ModuleBase_IViewer.h>
36 #include <ModuleBase_IViewWindow.h>
37 #include <ModuleBase_IPropertyPanel.h>
38 #include <ModuleBase_WidgetEditor.h>
39 #include <ModuleBase_WidgetValidated.h>
40 #include <ModuleBase_Tools.h>
41 #include <ModuleBase_OperationFeature.h>
42 #include <ModuleBase_WidgetFactory.h>
43 #include <ModuleBase_OperationDescription.h>
44 #include <ModuleBase_ViewerPrs.h>
46 #include <ModelAPI_Object.h>
47 #include <ModelAPI_Events.h>
48 #include <ModelAPI_Validator.h>
49 #include <ModelAPI_Data.h>
50 #include <ModelAPI_Session.h>
51 #include <ModelAPI_ResultBody.h>
52 #include <ModelAPI_AttributeString.h>
53 #include <ModelAPI_AttributeSelectionList.h>
54 #include <ModelAPI_Tools.h>
55 #include <ModelAPI_ResultConstruction.h>
57 #include <GeomDataAPI_Point2D.h>
58 #include <GeomDataAPI_Point.h>
59 #include <GeomDataAPI_Dir.h>
61 #include <XGUI_Displayer.h>
62 #include <XGUI_Workshop.h>
63 #include <XGUI_OperationMgr.h>
64 #include <XGUI_PropertyPanel.h>
65 #include <XGUI_ModuleConnector.h>
66 #include <XGUI_ContextMenuMgr.h>
67 #include <XGUI_Tools.h>
68 #include <XGUI_ObjectsBrowser.h>
69 #include <XGUI_SelectionMgr.h>
70 #include <XGUI_DataModel.h>
71 #include <XGUI_ErrorMgr.h>
72 #include <XGUI_CustomPrs.h>
73 #include <XGUI_SelectionMgr.h>
74 #include <XGUI_ActionsMgr.h>
76 #include <SketchPlugin_Feature.h>
77 #include <SketchPlugin_Sketch.h>
78 #include <SketchPlugin_ConstraintAngle.h>
79 #include <SketchPlugin_ConstraintLength.h>
80 #include <SketchPlugin_ConstraintDistance.h>
81 #include <SketchPlugin_ConstraintParallel.h>
82 #include <SketchPlugin_ConstraintPerpendicular.h>
83 #include <SketchPlugin_ConstraintRadius.h>
85 #include <SketcherPrs_SymbolPrs.h>
86 #include <SketcherPrs_Coincident.h>
87 #include <SketcherPrs_Tools.h>
89 #include <Events_Loop.h>
90 #include <Config_PropManager.h>
91 #include <Config_Keywords.h>
93 #include <AIS_Dimension.hxx>
94 #include <AIS_InteractiveObject.hxx>
95 #include <StdSelect_TypeOfFace.hxx>
96 #include <TopoDS_Vertex.hxx>
98 #include <TopoDS_Shape.hxx>
99 #include <BRep_Tool.hxx>
102 #include <QMouseEvent>
105 #include <QApplication>
106 #include <QMessageBox>
107 #include <QMainWindow>
111 #include <GeomAlgoAPI_FaceBuilder.h>
112 #include <GeomDataAPI_Dir.h>
114 #include <SelectMgr_ListIteratorOfListOfFilter.hxx>
120 /*!Create and return new instance of XGUI_Module*/
121 extern "C" PARTSET_EXPORT ModuleBase_IModule* createModule(ModuleBase_IWorkshop* theWshop)
123 return new PartSet_Module(theWshop);
126 PartSet_Module::PartSet_Module(ModuleBase_IWorkshop* theWshop)
127 : ModuleBase_IModule(theWshop),
129 myIsOperationIsLaunched(false)
131 new PartSet_IconFactory();
133 mySketchMgr = new PartSet_SketcherMgr(this);
134 mySketchReentrantMgr = new PartSet_SketcherReentrantMgr(theWshop);
136 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(theWshop);
137 XGUI_Workshop* aWorkshop = aConnector->workshop();
139 ModuleBase_IViewer* aViewer = theWshop->viewer();
140 connect(aViewer, SIGNAL(keyRelease(ModuleBase_IViewWindow*, QKeyEvent*)),
141 this, SLOT(onKeyRelease(ModuleBase_IViewWindow*, QKeyEvent*)));
142 connect(aViewer, SIGNAL(viewTransformed(int)),
143 SLOT(onViewTransformed(int)));
144 connect(aViewer, SIGNAL(viewCreated(ModuleBase_IViewWindow*)),
145 SLOT(onViewCreated(ModuleBase_IViewWindow*)));
146 myMenuMgr = new PartSet_MenuMgr(this);
147 myCustomPrs = new PartSet_CustomPrs(theWshop);
149 myOverconstraintListener = new PartSet_OverconstraintListener(theWshop);
151 Events_Loop* aLoop = Events_Loop::loop();
152 aLoop->registerListener(this, Events_Loop::eventByName(EVENT_DOCUMENT_CHANGED));
154 mySelectionFilters.Append(new PartSet_GlobalFilter(myWorkshop));
155 mySelectionFilters.Append(new PartSet_FilterInfinite(myWorkshop));
157 setDefaultConstraintShown();
159 Config_PropManager::registerProp("Visualization", "operation_parameter_color",
160 "Reference shape wireframe color in operation", Config_Prop::Color,
161 PartSet_CustomPrs::OPERATION_PARAMETER_COLOR());
162 Config_PropManager::registerProp("Visualization", "operation_result_color",
163 "Result shape wireframe color in operation", Config_Prop::Color,
164 PartSet_CustomPrs::OPERATION_RESULT_COLOR());
165 Config_PropManager::registerProp("Visualization", "operation_highlight_color",
166 "Multi selector item color in operation", Config_Prop::Color,
167 PartSet_CustomPrs::OPERATION_HIGHLIGHT_COLOR());
168 Config_PropManager::registerProp("Visualization", "operation_remove_feature_color",
169 "Color of removed feature in operation", Config_Prop::Color,
170 PartSet_CustomPrs::OPERATION_REMOVE_FEATURE_COLOR());
173 PartSet_Module::~PartSet_Module()
175 SelectMgr_ListIteratorOfListOfFilter aIt(mySelectionFilters);
176 for (; aIt.More(); aIt.Next()) {
177 Handle(SelectMgr_Filter) aFilter = aIt.Value();
178 if (!aFilter.IsNull())
182 delete myOverconstraintListener;
185 void PartSet_Module::activateSelectionFilters()
187 SelectMgr_ListIteratorOfListOfFilter aIt(mySelectionFilters);
188 for (; aIt.More(); aIt.Next()) {
189 Handle(SelectMgr_Filter) aFilter = aIt.Value();
190 if (!aFilter.IsNull())
191 myWorkshop->viewer()->addSelectionFilter(aFilter);
195 void PartSet_Module::deactivateSelectionFilters()
197 SelectMgr_ListIteratorOfListOfFilter aIt(mySelectionFilters);
198 for (; aIt.More(); aIt.Next()) {
199 Handle(SelectMgr_Filter) aFilter = aIt.Value();
200 if (!aFilter.IsNull())
201 myWorkshop->viewer()->removeSelectionFilter(aFilter);
205 void PartSet_Module::storeSelection()
207 // cash is used only to restore selection, so it should be filled in storeSelection and
208 // after applying immediatelly cleared in restoreSelection
209 myCurrentSelection.clear();
210 sketchMgr()->storeSelection(false, myCurrentSelection);
213 void PartSet_Module::restoreSelection()
215 // cash is used only to restore selection, so it should be filled in storeSelection and
216 // after applying immediatelly cleared in restoreSelection
217 sketchMgr()->restoreSelection(myCurrentSelection);
218 myCurrentSelection.clear();
221 void PartSet_Module::registerValidators()
223 //Registering of validators
224 SessionPtr aMgr = ModelAPI_Session::get();
225 ModelAPI_ValidatorsFactory* aFactory = aMgr->validators();
226 aFactory->registerValidator("PartSet_DistanceSelection", new PartSet_DistanceSelection);
227 aFactory->registerValidator("PartSet_LengthSelection", new PartSet_LengthSelection);
228 aFactory->registerValidator("PartSet_PerpendicularSelection", new PartSet_PerpendicularSelection);
229 aFactory->registerValidator("PartSet_ParallelSelection", new PartSet_ParallelSelection);
230 aFactory->registerValidator("PartSet_RadiusSelection", new PartSet_RadiusSelection);
231 aFactory->registerValidator("PartSet_RigidSelection", new PartSet_RigidSelection);
232 aFactory->registerValidator("PartSet_CoincidentSelection", new PartSet_CoincidentSelection);
233 aFactory->registerValidator("PartSet_HVDirSelection", new PartSet_HVDirSelection);
234 aFactory->registerValidator("PartSet_TangentSelection", new PartSet_TangentSelection);
235 aFactory->registerValidator("PartSet_FilletSelection", new PartSet_FilletSelection);
236 aFactory->registerValidator("PartSet_AngleSelection", new PartSet_AngleSelection);
237 aFactory->registerValidator("PartSet_EqualSelection", new PartSet_EqualSelection);
238 aFactory->registerValidator("PartSet_CollinearSelection", new PartSet_CollinearSelection);
239 aFactory->registerValidator("PartSet_MiddlePointSelection", new PartSet_MiddlePointSelection);
240 aFactory->registerValidator("PartSet_DifferentObjects", new PartSet_DifferentObjectsValidator);
241 aFactory->registerValidator("PartSet_CoincidentAttr", new PartSet_CoincidentAttr);
242 aFactory->registerValidator("PartSet_MultyTranslationSelection",
243 new PartSet_MultyTranslationSelection);
244 aFactory->registerValidator("PartSet_SplitSelection", new PartSet_SplitSelection);
245 aFactory->registerValidator("PartSet_ProjectionSelection", new PartSet_ProjectionSelection);
248 void PartSet_Module::connectToPropertyPanel(ModuleBase_ModelWidget* theWidget,
249 const bool isToConnect)
251 mySketchMgr->connectToPropertyPanel(theWidget, isToConnect);
254 void PartSet_Module::operationCommitted(ModuleBase_Operation* theOperation)
256 if (sketchMgr()->isNestedSketchOperation(theOperation)) {
257 mySketchMgr->commitNestedSketch(theOperation);
260 /// Restart sketcher operations automatically
261 if (!mySketchReentrantMgr->operationCommitted(theOperation)) {
263 ModuleBase_OperationFeature* aFOperation =
264 dynamic_cast<ModuleBase_OperationFeature*>(theOperation);
265 if (aFOperation && !aFOperation->isEditOperation()) {
266 // the selection is cleared after commit the create operation
267 // in order to do not use the same selected objects in the restarted operation
268 // for common behaviour, the selection is cleared even if the operation is not restarted
269 getWorkshop()->selector()->clearSelection();
274 void PartSet_Module::operationAborted(ModuleBase_Operation* theOperation)
276 /// Restart sketcher operations automatically
277 mySketchReentrantMgr->operationAborted(theOperation);
280 void PartSet_Module::operationStarted(ModuleBase_Operation* theOperation)
282 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>
285 XGUI_Workshop* aWorkshop = XGUI_Tools::workshop(workshop());
286 XGUI_PropertyPanel* aPropertyPanel = aWorkshop->propertyPanel();
288 ModuleBase_ModelWidget* aFilledWidget = 0;
289 bool aPostonedWidgetActivation = false;
291 FeaturePtr aFeature = aFOperation->feature();
292 /// Restart sketcher operations automatically
293 /// it is important to call method of sketch reentrant manager before filling of PP
294 /// because it fills some created feature attributes, these new values should be used
295 /// to fill the property panel
296 mySketchReentrantMgr->operationStarted(theOperation);
298 aWorkshop->fillPropertyPanel(aFOperation);
299 // filling the operation values by the current selection
300 // if the operation can be committed after the controls filling, the method perform should
301 // be stopped. Otherwise unnecessary presentations can be shown(e.g. operation prs in sketch)
302 bool isOperationCommitted = false;
303 if (!aFOperation->isEditOperation()) {
304 std::string aGreedAttributeId = ModuleBase_Tools::findGreedAttribute(workshop(), aFeature);
305 // if there is a greed attribute, automatic commit by preselection
306 // for this feature is prohibited
307 aFilledWidget = aFOperation->activateByPreselection(aGreedAttributeId);
308 if (currentOperation() != aFOperation)
309 isOperationCommitted = true;
311 if (aGreedAttributeId.empty()) {
312 // a signal should be emitted before the next widget activation
313 // because, the activation of the next widget will give a focus to the widget.
314 // As a result the value of the widget is initialized.
315 // And commit may happens until the value is entered.
317 if (mySketchReentrantMgr->canBeCommittedByPreselection())
318 isOperationCommitted = mySketchMgr->operationActivatedByPreselection();
319 // activate the next obligatory widget
320 if (!isOperationCommitted)
321 aPropertyPanel->activateNextWidget(aFilledWidget);
324 else { // there is a greed widget
325 const QList<ModuleBase_ModelWidget*>& aWidgets = aPropertyPanel->modelWidgets();
326 std::string aFirstAttributeId = aWidgets.front()->attributeID();
327 // activate next widget after greeded if it is the first widget in the panel
328 // else the first panel widget is already activated by operation start
329 if (aFirstAttributeId == aGreedAttributeId)
330 aPostonedWidgetActivation = true;
333 } if (!isOperationCommitted) {
334 aWorkshop->connectToPropertyPanel(true);
335 updateSketcherOnStart(aFOperation);
336 updatePresentationsOnStart(aFOperation);
338 // the objects of the current operation should be deactivated
339 QObjectPtrList anObjects;
340 anObjects.append(aFeature);
341 std::list<ResultPtr> aResults;
342 ModelAPI_Tools::allResults(aFeature, aResults);
343 std::list<ResultPtr>::const_iterator aIt;
344 for (aIt = aResults.begin(); aIt != aResults.end(); ++aIt) {
345 anObjects.append(*aIt);
347 QObjectPtrList::const_iterator anIt = anObjects.begin(), aLast = anObjects.end();
348 for (; anIt != aLast; anIt++)
349 aWorkshop->deactivateActiveObject(*anIt, false);
350 if (anObjects.size() > 0) {
351 XGUI_Displayer* aDisplayer = aWorkshop->displayer();
352 aDisplayer->updateViewer();
354 /// state of command actions should be updated after displayed objects modification because
355 /// deactivation(for example) of objects may influence on selection in the viewer
356 /// State of command actions may depend on selection in the viewer(e.g. Sketch)
357 workshop()->updateCommandStatus();
359 if (aPostonedWidgetActivation) {
360 // if the widget is an empty in the chain of activated widgets, the current operation
361 // is restarted. It should be performed after functionality of the operation starting
362 aPropertyPanel->activateNextWidget(aFilledWidget);
367 void PartSet_Module::updateSketcherOnStart(ModuleBase_Operation* theOperation)
369 if (PartSet_SketcherMgr::isSketchOperation(theOperation)) {
370 mySketchMgr->startSketch(theOperation);
372 else if (sketchMgr()->isNestedSketchOperation(theOperation)) {
373 mySketchMgr->startNestedSketch(theOperation);
377 void PartSet_Module::updatePresentationsOnStart(ModuleBase_Operation* theOperation)
379 ModuleBase_OperationFeature* aFOperation =
380 dynamic_cast<ModuleBase_OperationFeature*>(theOperation);
382 myCustomPrs->activate(aFOperation->feature(), ModuleBase_IModule::CustomizeArguments, true);
383 myCustomPrs->activate(aFOperation->feature(), ModuleBase_IModule::CustomizeResults, true);
387 void PartSet_Module::operationResumed(ModuleBase_Operation* theOperation)
389 ModuleBase_IModule::operationResumed(theOperation);
391 ModuleBase_OperationFeature* aFOperation =
392 dynamic_cast<ModuleBase_OperationFeature*>(theOperation);
394 myCustomPrs->activate(aFOperation->feature(), ModuleBase_IModule::CustomizeArguments, true);
395 myCustomPrs->activate(aFOperation->feature(), ModuleBase_IModule::CustomizeResults, true);
399 void PartSet_Module::operationStopped(ModuleBase_Operation* theOperation)
401 bool isModifiedArgs = myCustomPrs->deactivate(ModuleBase_IModule::CustomizeArguments, false);
402 bool isModifiedResults = myCustomPrs->deactivate(ModuleBase_IModule::CustomizeResults, false);
403 bool isModified = isModifiedArgs || isModifiedResults;
405 if (sketchMgr()->isNestedSketchOperation(theOperation)) {
406 mySketchMgr->stopNestedSketch(theOperation);
408 else if (PartSet_SketcherMgr::isSketchOperation(theOperation))
409 setDefaultConstraintShown();
411 //VSV: Viewer is updated on feature update and redisplay
413 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(myWorkshop);
414 XGUI_Displayer* aDisplayer = aConnector->workshop()->displayer();
415 aDisplayer->updateViewer();
418 QMap<PartSet_Tools::ConstraintVisibleState, bool>::const_iterator
419 anIt = myHasConstraintShown.begin(), aLast = myHasConstraintShown.end();
420 for (; anIt != aLast; anIt++) {
421 mySketchMgr->updateBySketchParameters(anIt.key(), anIt.value());
425 ModuleBase_Operation* PartSet_Module::currentOperation() const
427 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
428 XGUI_OperationMgr* anOpMgr = aConnector->workshop()->operationMgr();
429 return anOpMgr->currentOperation();
432 bool PartSet_Module::canUndo() const
434 bool aCanUndo = false;
435 SessionPtr aMgr = ModelAPI_Session::get();
436 if (aMgr->hasModuleDocument() && aMgr->canUndo()) {
437 aCanUndo = !aMgr->isOperation();
438 if (!aCanUndo) // check the enable state additionally by sketch manager
439 aCanUndo = aMgr->canUndo();
444 bool PartSet_Module::canRedo() const
446 bool aCanRedo = false;
447 SessionPtr aMgr = ModelAPI_Session::get();
448 if (aMgr->hasModuleDocument() && aMgr->canRedo()) {
449 aCanRedo = !aMgr->isOperation();
450 if (!aCanRedo) // check the enable state additionally by sketch manager
451 aCanRedo = aMgr->canRedo();
456 bool PartSet_Module::canApplyAction(const ObjectPtr& theObject, const QString& theActionId) const
459 if (theActionId == "MOVE_CMD") {
460 FeaturePtr aFeature = ModelAPI_Feature::feature(theObject);
462 ResultPtr aResult = ModuleBase_Tools::firstResult(aFeature);
463 // part features can not be moved in the history.
464 if (aResult.get() && aResult->groupName() == ModelAPI_ResultPart::group())
471 bool PartSet_Module::canEraseObject(const ObjectPtr& theObject) const
473 // the sketch manager put the restriction to the objects erase
474 return mySketchMgr->canEraseObject(theObject);
477 bool PartSet_Module::canDisplayObject(const ObjectPtr& theObject) const
479 // the sketch manager put the restriction to the objects display
480 return mySketchMgr->canDisplayObject(theObject);
483 /*void PartSet_Module::processHiddenObject(const std::list<ObjectPtr>& theObjects)
485 mySketchMgr->processHiddenObject(theObjects);
488 bool PartSet_Module::canActivateSelection(const ObjectPtr& theObject) const
490 bool aCanActivate = ModuleBase_IModule::canActivateSelection(theObject);
492 ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
493 bool isSketchOp = PartSet_SketcherMgr::isSketchOperation(anOperation),
494 isNestedOp = sketchMgr()->isNestedSketchOperation(anOperation);
495 if (isSketchOp || isNestedOp) {
496 // in active sketch operation it is possible to activate operation object in selection
497 // in the edit operation, e.g. points of the line can be moved when the line is edited
498 ModuleBase_OperationFeature* aFOperation =
499 dynamic_cast<ModuleBase_OperationFeature*>(anOperation);
500 aCanActivate = aCanActivate || (aFOperation && aFOperation->isEditOperation());
505 bool PartSet_Module::addViewerMenu(const QMap<QString, QAction*>& theStdActions,
507 QMap<int, QAction*>& theMenuActions) const
509 return myMenuMgr->addViewerMenu(theStdActions, theParent, theMenuActions);
512 void PartSet_Module::updateViewerMenu(const QMap<QString, QAction*>& theStdActions)
514 myMenuMgr->updateViewerMenu(theStdActions);
517 bool PartSet_Module::isActionEnableStateFixed(const int theActionId) const
519 bool isEnabledFixed = false;
520 if (theActionId == XGUI_ActionsMgr::AcceptAll &&
521 mySketchReentrantMgr->isInternalEditActive())
522 isEnabledFixed = true;
523 return isEnabledFixed;
526 QString PartSet_Module::getFeatureError(const FeaturePtr& theFeature)
528 QString anError = ModuleBase_IModule::getFeatureError(theFeature);
529 if (anError.isEmpty())
530 anError = sketchMgr()->getFeatureError(theFeature);
535 void PartSet_Module::grantedOperationIds(ModuleBase_Operation* theOperation,
536 QStringList& theIds) const
538 myMenuMgr->grantedOperationIds(theOperation, theIds);
540 if (PartSet_SketcherMgr::isSketchOperation(theOperation)) {
541 XGUI_Workshop* aWorkshop = getWorkshop();
542 theIds.append(aWorkshop->contextMenuMgr()->action("DELETE_CMD")->text());
546 void PartSet_Module::activeSelectionModes(QIntList& theModes)
549 if (mySketchMgr->activeSketch().get())
550 PartSet_SketcherMgr::sketchSelectionModes(theModes);
553 void PartSet_Module::customSubShapesSelectionModes(QIntList& theTypes)
555 if (theTypes.contains(TopAbs_FACE))
556 theTypes.append(SketcherPrs_Tools::Sel_Sketch_Face);
557 if (theTypes.contains(TopAbs_WIRE))
558 theTypes.append(SketcherPrs_Tools::Sel_Sketch_Wire);
561 void PartSet_Module::getGeomSelection(const std::shared_ptr<ModuleBase_ViewerPrs>& theSelected,
562 ObjectPtr& theObject, AttributePtr& theAttribute)
564 ObjectPtr anObject = theSelected->object();
565 GeomShapePtr aShape = theSelected->shape();
567 theAttribute = findAttribute(anObject, aShape);
568 // TODO: try to create result if object is an external object
569 theObject = anObject;
572 bool PartSet_Module::isMouseOverWindow()
574 return mySketchMgr->isMouseOverWindow();
577 bool PartSet_Module::isSketchNeutralPointActivated() const
579 bool isNeutralPoint = true;
580 if (sketchReentranceMgr()->isInternalEditActive())
581 isNeutralPoint = false;
582 if (myIsOperationIsLaunched)
583 isNeutralPoint = false;
585 return isNeutralPoint;
588 void PartSet_Module::closeDocument()
590 myActivePartIndex = QModelIndex();
594 void PartSet_Module::clearViewer()
596 myCustomPrs->clearPrs();
598 XGUI_Workshop* aWorkshop = getWorkshop();
599 XGUI_Displayer* aDisplayer = aWorkshop->displayer();
600 aDisplayer->deactivateSelectionFilters();
603 void PartSet_Module::propertyPanelDefined(ModuleBase_Operation* theOperation)
605 ModuleBase_OperationFeature* aFOperation =
606 dynamic_cast<ModuleBase_OperationFeature*>(theOperation);
610 ModuleBase_IPropertyPanel* aPanel = aFOperation->propertyPanel();
611 // we have to manually activate the sketch label in edit mode
612 if (PartSet_SketcherMgr::isSketchOperation(aFOperation) && (aFOperation->isEditOperation()))
613 aPanel->activateWidget(aPanel->modelWidgets().first());
616 bool PartSet_Module::createWidgets(ModuleBase_Operation* theOperation,
617 QList<ModuleBase_ModelWidget*>& theWidgets) const
619 bool aProcessed = false;
621 ModuleBase_OperationFeature* aFOperation =
622 dynamic_cast<ModuleBase_OperationFeature*>(theOperation);
623 XGUI_Workshop* aWorkshop = getWorkshop();
624 XGUI_PropertyPanel* aPropertyPanel = aWorkshop->propertyPanel();
625 if (mySketchMgr->activeSketch().get() && aFOperation && aPropertyPanel) {
626 ModuleBase_ISelection* aSelection = workshop()->selection();
627 // click on a point in sketch leads here with the point is highlighted, not yet selected
628 QList<ModuleBase_ViewerPrsPtr> aPreselection = aSelection->getHighlighted();
629 if (aPreselection.size() == 1) {
630 ModuleBase_ViewerPrsPtr aSelectedPrs = aPreselection[0];
631 ObjectPtr anObject = aSelectedPrs->object();
633 FeaturePtr aFeature = ModelAPI_Feature::feature(anObject);
634 FeaturePtr anOpFeature = aFOperation->feature();
635 GeomShapePtr aShape = aSelectedPrs->shape();
636 // click on the digit of dimension constrain comes here
637 // with an empty shape, so we need the check
638 if (aFeature == anOpFeature && aShape.get() && !aShape->isNull()) {
639 // if feature has only one result and shape of result is equal to selected shape
640 // this attribute is not processed. It is a case of Sketch Point.
641 if (aFeature->results().size() == 1) {
642 ResultPtr aResult = aFeature->results().front();
643 if (aResult.get() && aResult->shape()->isEqual(aShape))
646 const TopoDS_Shape& aTDShape = aShape->impl<TopoDS_Shape>();
647 AttributePtr anAttribute = PartSet_Tools::findAttributeBy2dPoint(anObject, aTDShape,
648 mySketchMgr->activeSketch());
649 if (anAttribute.get()) {
650 QString aXmlRepr = aFOperation->getDescription()->xmlRepresentation();
651 ModuleBase_WidgetFactory aFactory(aXmlRepr.toStdString(), workshop());
653 const std::string anAttributeId = anAttribute->id();
654 aFactory.createWidget(aPropertyPanel->contentWidget(), anAttributeId);
656 theWidgets = aFactory.getModelWidgets();
657 // it is possible that the point does not present in XML definition,
658 // in this case, we assume that it is not processed by this module
659 // e.g. "Intersection point" feature
660 aProcessed = !theWidgets.isEmpty();
668 void PartSet_Module::onSelectionChanged()
670 ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
674 bool isSketcherOp = false;
675 // An edit operation is enable only if the current opeation is the sketch operation
676 if (mySketchMgr->activeSketch()) {
677 if (PartSet_Tools::sketchPlane(mySketchMgr->activeSketch()))
678 isSketcherOp = PartSet_SketcherMgr::isSketchOperation(aOperation);
681 // Editing of constraints can be done on selection
682 ModuleBase_ISelection* aSelect = myWorkshop->selection();
683 QList<ModuleBase_ViewerPrsPtr> aSelected = aSelect->getSelected();
684 if (aSelected.size() == 1) {
685 ModuleBase_ViewerPrsPtr aPrs = aSelected.first();
686 ObjectPtr aObject = aPrs->object();
687 FeaturePtr aFeature = ModelAPI_Feature::feature(aObject);
689 std::string aId = aFeature->getKind();
690 if ((aId == SketchPlugin_ConstraintRadius::ID()) ||
691 (aId == SketchPlugin_ConstraintLength::ID()) ||
692 (aId == SketchPlugin_ConstraintDistance::ID()) ||
693 (aId == SketchPlugin_ConstraintAngle::ID())) {
694 editFeature(aFeature);
701 void PartSet_Module::onKeyRelease(ModuleBase_IViewWindow* theWnd, QKeyEvent* theEvent)
703 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
704 XGUI_OperationMgr* anOpMgr = aConnector->workshop()->operationMgr();
705 anOpMgr->onKeyReleased(theWnd->viewPort(), theEvent);
708 ModuleBase_ModelWidget* PartSet_Module::createWidgetByType(const std::string& theType,
710 Config_WidgetAPI* theWidgetApi)
712 ModuleBase_IWorkshop* aWorkshop = workshop();
713 XGUI_Workshop* aXUIWorkshop = getWorkshop();
714 ModuleBase_ModelWidget* aWgt = NULL;
715 if (theType == "sketch-start-label") {
716 PartSet_WidgetSketchLabel* aLabelWgt = new PartSet_WidgetSketchLabel(theParent, aWorkshop,
717 theWidgetApi, myHasConstraintShown);
718 connect(aLabelWgt, SIGNAL(planeSelected(const std::shared_ptr<GeomAPI_Pln>&)),
719 mySketchMgr, SLOT(onPlaneSelected(const std::shared_ptr<GeomAPI_Pln>&)));
720 connect(aLabelWgt, SIGNAL(showConstraintToggled(int, bool)),
721 mySketchMgr, SLOT(onShowConstraintsToggle(int, bool)));
723 } else if (theType == "sketch-2dpoint_selector") {
724 PartSet_WidgetPoint2D* aPointWgt = new PartSet_WidgetPoint2D(theParent, aWorkshop,
726 aPointWgt->setSketch(mySketchMgr->activeSketch());
727 connect(aPointWgt, SIGNAL(vertexSelected()), sketchReentranceMgr(), SLOT(onVertexSelected()));
729 }else if (theType == "sketch-2dpoint_flyout_selector") {
730 PartSet_WidgetPoint2DFlyout* aPointWgt = new PartSet_WidgetPoint2DFlyout(theParent, aWorkshop,
732 aPointWgt->setSketch(mySketchMgr->activeSketch());
733 connect(aPointWgt, SIGNAL(vertexSelected()), sketchReentranceMgr(), SLOT(onVertexSelected()));
735 } else if (theType == "sketch_shape_selector") {
736 PartSet_WidgetShapeSelector* aShapeSelectorWgt =
737 new PartSet_WidgetShapeSelector(theParent, aWorkshop, theWidgetApi);
738 aShapeSelectorWgt->setSketcher(mySketchMgr->activeSketch());
739 aWgt = aShapeSelectorWgt;
740 } else if (theType == "sketch_multi_selector") {
741 PartSet_WidgetMultiSelector* aShapeSelectorWgt =
742 new PartSet_WidgetMultiSelector(theParent, aWorkshop, theWidgetApi);
743 aShapeSelectorWgt->setSketcher(mySketchMgr->activeSketch());
744 aWgt = aShapeSelectorWgt;
746 else if (theType == "sketch_sub_shape_selector") {
747 PartSet_WidgetSubShapeSelector* aSubShapeSelectorWgt =
748 new PartSet_WidgetSubShapeSelector(theParent, aWorkshop, theWidgetApi);
749 aSubShapeSelectorWgt->setSketcher(mySketchMgr->activeSketch());
750 aWgt = aSubShapeSelectorWgt;
752 else if (theType == "sketch_feature_point_selector") {
753 PartSet_WidgetFeaturePointSelector* aPointSelectorWgt =
754 new PartSet_WidgetFeaturePointSelector(theParent, aWorkshop, theWidgetApi);
755 aPointSelectorWgt->setSketcher(mySketchMgr->activeSketch());
756 aWgt = aPointSelectorWgt;
758 else if (theType == WDG_DOUBLEVALUE_EDITOR) {
759 aWgt = new PartSet_WidgetEditor(theParent, aWorkshop, theWidgetApi);
760 } else if (theType == "export_file_selector") {
761 aWgt = new PartSet_WidgetFileSelector(theParent, aWorkshop, theWidgetApi);
762 } else if (theType == "sketch_launcher") {
763 aWgt = new PartSet_WidgetSketchCreator(theParent, this, theWidgetApi);
764 } else if (theType == "module_choice") {
765 aWgt = new PartSet_WidgetChoice(theParent, theWidgetApi);
766 connect(aWgt, SIGNAL(itemSelected(ModuleBase_ModelWidget*, int)),
767 this, SLOT(onChoiceChanged(ModuleBase_ModelWidget*, int)));
772 ModuleBase_ModelWidget* PartSet_Module::activeWidget() const
774 ModuleBase_ModelWidget* anActiveWidget = 0;
776 anActiveWidget = mySketchReentrantMgr->internalActiveWidget();
777 if (!anActiveWidget) {
778 ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
780 ModuleBase_IPropertyPanel* aPanel = aOperation->propertyPanel();
781 anActiveWidget = aPanel ? aPanel->activeWidget() : 0;
784 return anActiveWidget;
787 bool PartSet_Module::deleteObjects()
789 bool isProcessed = false;
791 XGUI_Workshop* aWorkshop = getWorkshop();
792 XGUI_OperationMgr* anOpMgr = aWorkshop->operationMgr();
794 //SessionPtr aMgr = ModelAPI_Session::get();
795 // 1. check whether the delete should be processed in the module
796 ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
797 bool isSketchOp = PartSet_SketcherMgr::isSketchOperation(anOperation),
798 isNestedOp = sketchMgr()->isNestedSketchOperation(anOperation);
799 if (isSketchOp || isNestedOp) {
801 // 2. find selected presentations
802 // selected objects should be collected before the current operation abort because
803 // the abort leads to selection lost on constraint objects. It can be corrected after #386 issue
804 ModuleBase_ISelection* aSel = workshop()->selection();
805 QObjectPtrList aSelectedObj = aSel->selectedPresentations();
806 // if there are no selected objects in the viewer, that means that the selection in another
807 // place cased this method. It is necessary to return the false value to understande in above
808 // method that delete is not processed
809 if (aSelectedObj.count() == 0)
812 // avoid delete of the objects, which are not belong to the current sketch
813 // in order to do not delete results of other sketches
814 QObjectPtrList aSketchObjects;
815 QObjectPtrList::const_iterator anIt = aSelectedObj.begin(), aLast = aSelectedObj.end();
816 for ( ; anIt != aLast; anIt++) {
817 ObjectPtr anObject = *anIt;
818 if (mySketchMgr->isObjectOfSketch(anObject)) {
819 // sketch feature should be used in this list because workshop deletes features only
820 // results are skipped
821 FeaturePtr aSketchFeature = ModelAPI_Feature::feature(anObject);
822 aSketchObjects.append(aSketchFeature);
825 // if the selection contains only local selected presentations from other sketches,
826 // the Delete operation should not be done at all
827 if (aSketchObjects.size() == 0)
830 // 3. start operation
831 QString aDescription = aWorkshop->contextMenuMgr()->action("DELETE_CMD")->text();
832 ModuleBase_OperationAction* anOpAction = new ModuleBase_OperationAction(aDescription, this);
834 // the active nested sketch operation should be aborted unconditionally
835 // the Delete action should be additionally granted for the Sketch operation
836 // in order to do not abort/commit it
838 if (!anOpMgr->canStartOperation(anOpAction->id(), isCommitted))
839 return true; // the objects are processed but can not be deleted
841 anOpMgr->startOperation(anOpAction);
843 // WORKAROUND, should be done to avoid viewer highlight update after deletetion of objects
844 // the problem is in AIS Dimensions recompute
845 // if a line and the dim are removed, line is the first
846 // it causes the AIS recompute, where the base line is null,
847 // the result is empty AIS in the viewer
848 XGUI_Tools::workshop(myWorkshop)->selector()->clearSelection();
850 // 4. delete features
851 // sketch feature should be skipped, only sub-features can be removed
852 // when sketch operation is active
853 aWorkshop->deleteFeatures(aSketchObjects);
855 anOpMgr->commitOperation();
860 void PartSet_Module::editFeature(FeaturePtr theFeature)
862 storeConstraintsState(theFeature->getKind());
863 ModuleBase_IModule::editFeature(theFeature);
866 bool PartSet_Module::canCommitOperation() const
871 void PartSet_Module::launchOperation(const QString& theCmdId, const bool& isStartAfterCommitOnly)
873 myIsOperationIsLaunched = true;
874 storeConstraintsState(theCmdId.toStdString());
875 updateConstraintsState(theCmdId.toStdString());
877 ModuleBase_IModule::launchOperation(theCmdId, isStartAfterCommitOnly);
879 myIsOperationIsLaunched = false;
882 void PartSet_Module::storeConstraintsState(const std::string& theFeatureKind)
884 if (myWorkshop->currentOperation() &&
885 myWorkshop->currentOperation()->id().toStdString() == SketchPlugin_Sketch::ID()) {
886 const QMap<PartSet_Tools::ConstraintVisibleState, bool>& aShownStates =
887 mySketchMgr->showConstraintStates();
888 myHasConstraintShown = aShownStates;
892 void PartSet_Module::updateConstraintsState(const std::string& theFeatureKind)
894 if (PartSet_SketcherMgr::constraintsIdList().contains(theFeatureKind.c_str()) ||
895 PartSet_SketcherMgr::replicationsIdList().contains(theFeatureKind.c_str())) {
896 // Show constraints if a constraint was anOperation
897 mySketchMgr->updateBySketchParameters(PartSet_Tools::Geometrical, true);
898 mySketchMgr->updateBySketchParameters(PartSet_Tools::Dimensional, true);
899 mySketchMgr->updateBySketchParameters(PartSet_Tools::Expressions,
900 myHasConstraintShown[PartSet_Tools::Expressions]);
904 void PartSet_Module::onObjectDisplayed(ObjectPtr theObject, AISObjectPtr theAIS)
906 Handle(AIS_InteractiveObject) anAIS = theAIS->impl<Handle(AIS_InteractiveObject)>();
907 if (!anAIS.IsNull()) {
908 Handle(AIS_InteractiveContext) aCtx = anAIS->GetContext();
909 Handle(AIS_Dimension) aDim = Handle(AIS_Dimension)::DownCast(anAIS);
910 if (!aDim.IsNull()) {
911 aCtx->SetZLayer(aDim, myVisualLayerId);
913 Handle(SketcherPrs_SymbolPrs) aCons = Handle(SketcherPrs_SymbolPrs)::DownCast(anAIS);
915 aCtx->SetZLayer(aCons, myVisualLayerId);
920 void PartSet_Module::onBeforeObjectErase(ObjectPtr theObject, AISObjectPtr theAIS)
923 // it should be recomputed in order to disappear in the viewer if the corresponded object
925 //if (myCustomPrs->isActive())
926 // myCustomPrs->redisplay(theObject, false);
929 void PartSet_Module::onViewTransformed(int theTrsfType)
931 // Set length of arrows constant in pixel size
932 // if the operation is panning or rotate or panglobal then do nothing
933 if ((theTrsfType == 1) || (theTrsfType == 3) || (theTrsfType == 4))
935 ModuleBase_IViewer* aViewer = myWorkshop->viewer();
936 Handle(AIS_InteractiveContext) aContext = aViewer->AISContext();
937 if (aContext.IsNull())
940 //Handle(V3d_View) aView = aViewer->activeView();
942 XGUI_Workshop* aWorkshop = getWorkshop();
943 XGUI_Displayer* aDisplayer = aWorkshop->displayer();
944 Handle(V3d_Viewer) aV3dViewer = aContext->CurrentViewer();
945 Handle(V3d_View) aView;
947 for (aV3dViewer->InitDefinedViews();
948 aV3dViewer->MoreDefinedViews();
949 aV3dViewer->NextDefinedViews()) {
950 Handle(V3d_View) aV = aV3dViewer->DefinedView();
951 double aS = aV->Scale();
959 double aLen = aView->Convert(SketcherPrs_Tools::getDefaultArrowSize());
961 double aPrevLen = SketcherPrs_Tools::getArrowSize();
962 SketcherPrs_Tools::setArrowSize(aLen);
963 const double aPrevScale = aViewer->Scale(aViewer->activeView());
964 const double aCurScale = aViewer->activeView()->Camera()->Scale();
965 aViewer->SetScale(aViewer->activeView(), aCurScale);
966 SketcherPrs_Tools::setTextHeight (aCurScale / aPrevScale * SketcherPrs_Tools::getTextHeight());
967 bool isModified = false;
968 QList<AISObjectPtr> aPrsList = aDisplayer->displayedPresentations();
969 foreach (AISObjectPtr aAIS, aPrsList) {
970 Handle(AIS_InteractiveObject) aAisObj = aAIS->impl<Handle(AIS_InteractiveObject)>();
972 Handle(AIS_Dimension) aDim = Handle(AIS_Dimension)::DownCast(aAisObj);
973 if (!aDim.IsNull()) {
974 aDim->DimensionAspect()->ArrowAspect()->SetLength(aLen);
975 aContext->Redisplay(aDim, false);
980 aDisplayer->updateViewer();
983 bool PartSet_Module::isCustomPrsActivated(const ModuleBase_CustomizeFlag& theFlag) const
985 return myCustomPrs->isActive(theFlag);
988 void PartSet_Module::activateCustomPrs(const FeaturePtr& theFeature,
989 const ModuleBase_CustomizeFlag& theFlag,
990 const bool theUpdateViewer)
992 myCustomPrs->activate(theFeature, theFlag, theUpdateViewer);
995 void PartSet_Module::deactivateCustomPrs(const ModuleBase_CustomizeFlag& theFlag,
996 const bool theUpdateViewer)
998 myCustomPrs->deactivate(theFlag, theUpdateViewer);
1001 bool PartSet_Module::customisePresentation(ResultPtr theResult, AISObjectPtr thePrs,
1002 std::shared_ptr<GeomAPI_ICustomPrs> theCustomPrs)
1004 bool aCustomized = false;
1006 XGUI_Workshop* aWorkshop = getWorkshop();
1007 XGUI_Displayer* aDisplayer = aWorkshop->displayer();
1008 ObjectPtr anObject = aDisplayer->getObject(thePrs);
1012 if (!theResult.get()) {
1013 std::vector<int> aColor;
1014 XGUI_CustomPrs::getDefaultColor(anObject, true, aColor);
1015 if (!aColor.empty()) {
1016 aCustomized = thePrs->setColor(aColor[0], aColor[1], aColor[2]);
1019 // customize dimentional constrains
1020 sketchMgr()->customizePresentation(anObject);
1025 bool PartSet_Module::afterCustomisePresentation(std::shared_ptr<ModelAPI_Result> theResult,
1026 AISObjectPtr thePrs,
1027 GeomCustomPrsPtr theCustomPrs)
1029 bool aCustomized = false;
1031 XGUI_Workshop* aWorkshop = getWorkshop();
1032 XGUI_Displayer* aDisplayer = aWorkshop->displayer();
1033 ObjectPtr anObject = aDisplayer->getObject(thePrs);
1037 std::vector<int> aColor;
1038 bool aUseCustomColor = true;
1039 if (aUseCustomColor)
1040 myOverconstraintListener->getCustomColor(anObject, aColor);
1041 // customize sketch symbol presentation
1042 Handle(AIS_InteractiveObject) anAISIO = thePrs->impl<Handle(AIS_InteractiveObject)>();
1043 if (!anAISIO.IsNull()) {
1044 if (!Handle(SketcherPrs_SymbolPrs)::DownCast(anAISIO).IsNull()) {
1045 Handle(SketcherPrs_SymbolPrs) aPrs = Handle(SketcherPrs_SymbolPrs)::DownCast(anAISIO);
1046 if (!aPrs.IsNull()) {
1047 aPrs->SetCustomColor(aColor);
1050 } else if (!Handle(SketcherPrs_Coincident)::DownCast(anAISIO).IsNull()) {
1051 Handle(SketcherPrs_Coincident) aPrs = Handle(SketcherPrs_Coincident)::DownCast(anAISIO);
1052 if (!aPrs.IsNull()) {
1053 aPrs->SetCustomColor(aColor);
1058 // customize sketch dimension constraint presentation
1060 if (!aColor.empty()) { // otherwise presentation has the default color
1061 aCustomized = thePrs->setColor(aColor[0], aColor[1], aColor[2]);
1067 bool PartSet_Module::customizeObject(ObjectPtr theObject, const ModuleBase_CustomizeFlag& theFlag,
1068 const bool theUpdateViewer)
1070 bool isRedisplayed = false;
1071 if (myCustomPrs->isActive(theFlag))
1072 isRedisplayed = myCustomPrs->redisplay(theObject, theFlag, theUpdateViewer);
1074 return isRedisplayed;
1077 void PartSet_Module::customizeObjectBrowser(QWidget* theObjectBrowser)
1079 XGUI_ObjectsBrowser* aOB = dynamic_cast<XGUI_ObjectsBrowser*>(theObjectBrowser);
1081 QLabel* aLabel = aOB->activeDocLabel();
1082 aLabel->installEventFilter(myMenuMgr);
1083 connect(aLabel, SIGNAL(customContextMenuRequested(const QPoint&)),
1084 SLOT(onActiveDocPopup(const QPoint&)));
1085 aOB->treeView()->setExpandsOnDoubleClick(false);
1086 connect(aOB->treeView(), SIGNAL(doubleClicked(const QModelIndex&)),
1087 SLOT(onTreeViewDoubleClick(const QModelIndex&)));
1089 Events_Loop* aLoop = Events_Loop::loop();
1090 aLoop->registerListener(this, Events_Loop::eventByName(EVENT_OBJECT_CREATED));
1094 void PartSet_Module::onActiveDocPopup(const QPoint& thePnt)
1096 SessionPtr aMgr = ModelAPI_Session::get();
1097 QAction* aActivatePartAction = myMenuMgr->action("ACTIVATE_PARTSET_CMD");
1099 XGUI_Workshop* aWorkshop = getWorkshop();
1100 QLabel* aHeader = aWorkshop->objectBrowser()->activeDocLabel();
1102 aActivatePartAction->setEnabled((aMgr->activeDocument() != aMgr->moduleDocument()));
1105 aMenu.addAction(aActivatePartAction);
1106 aMenu.exec(aHeader->mapToGlobal(thePnt));
1109 Handle(AIS_InteractiveObject) PartSet_Module::createPresentation(const ResultPtr& theResult)
1111 return mySketchMgr->createPresentation(theResult);
1115 ObjectPtr PartSet_Module::findPresentedObject(const AISObjectPtr& theAIS) const
1118 ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
1120 /// If last line finished on vertex the lines creation sequence has to be break
1121 ModuleBase_IPropertyPanel* aPanel = aOperation->propertyPanel();
1123 ModuleBase_ModelWidget* anActiveWidget = aPanel->activeWidget();
1124 // if there is an active widget, find the presented object in it
1125 if (!anActiveWidget)
1126 anActiveWidget = aPanel->preselectionWidget();
1128 ModuleBase_WidgetValidated* aWidgetValidated = dynamic_cast<ModuleBase_WidgetValidated*>
1130 if (aWidgetValidated)
1131 anObject = aWidgetValidated->findPresentedObject(theAIS);
1137 bool PartSet_Module::canBeShaded(Handle(AIS_InteractiveObject) theAIS) const
1139 bool aCanBeShaged = true;
1141 Handle(PartSet_ResultSketchPrs) aPrs = Handle(PartSet_ResultSketchPrs)::DownCast(theAIS);
1143 aCanBeShaged = false;
1145 return aCanBeShaged;
1148 void PartSet_Module::addObjectBrowserMenu(QMenu* theMenu) const
1150 QObjectPtrList aObjects = myWorkshop->selection()->selectedObjects();
1151 int aSelected = aObjects.size();
1152 SessionPtr aMgr = ModelAPI_Session::get();
1153 QAction* aActivatePartAction = myMenuMgr->action("ACTIVATE_PART_CMD");
1155 bool hasResult = false;
1156 bool hasFeature = false;
1157 bool hasParameter = false;
1158 bool hasCompositeOwner = false;
1159 bool hasResultInHistory = false;
1160 ModuleBase_Tools::checkObjects(aObjects, hasResult, hasFeature, hasParameter,
1161 hasCompositeOwner, hasResultInHistory);
1163 ModuleBase_Operation* aCurrentOp = myWorkshop->currentOperation();
1164 if (aSelected == 1) {
1165 ObjectPtr aObject = aObjects.first();
1167 ResultPartPtr aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aObject);
1168 FeaturePtr aFeature = std::dynamic_pointer_cast<ModelAPI_Feature>(aObject);
1169 bool isPart = aPart.get() ||
1170 (aFeature.get() && (aFeature->getKind() == PartSetPlugin_Part::ID()));
1172 DocumentPtr aPartDoc;
1174 aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aFeature->firstResult());
1176 if (aPart.get()) // this may be null is Part feature is disabled
1177 aPartDoc = aPart->partDoc();
1179 theMenu->addAction(aActivatePartAction);
1180 aActivatePartAction->setEnabled((aMgr->activeDocument() != aPartDoc));
1182 } else if (aObject->document() == aMgr->activeDocument()) {
1183 if (hasParameter || hasFeature) {
1184 myMenuMgr->action("EDIT_CMD")->setEnabled(true);
1185 theMenu->addAction(myMenuMgr->action("EDIT_CMD"));
1186 if (aCurrentOp && aFeature.get()) {
1187 if (aCurrentOp->id().toStdString() == aFeature->getKind())
1188 myMenuMgr->action("EDIT_CMD")->setEnabled(false);
1195 myMenuMgr->action("EDIT_CMD")->setEnabled(aCurrentOp == 0);
1196 theMenu->addAction(myMenuMgr->action("EDIT_CMD"));
1197 theMenu->addSeparator();
1200 bool aNotDeactivate = (aCurrentOp == 0);
1201 if (!aNotDeactivate) {
1202 aActivatePartAction->setEnabled(false);
1206 #define EXPAND_PARENT(OBJ) \
1207 QModelIndex aObjIndex = aDataModel->objectIndex(OBJ); \
1208 if (aObjIndex.isValid()) { \
1209 QModelIndex aParent = aObjIndex.parent(); \
1210 int aCount = aDataModel->rowCount(aParent); \
1212 aTreeView->setExpanded(aParent, true); \
1216 void PartSet_Module::processEvent(const std::shared_ptr<Events_Message>& theMessage)
1218 if (theMessage->eventID() == Events_Loop::loop()->eventByName(EVENT_DOCUMENT_CHANGED)) {
1219 // Do not change activation of parts if an operation active
1220 static QStringList aAllowActivationList;
1221 if (aAllowActivationList.isEmpty())
1222 aAllowActivationList <<
1223 QString(PartSetPlugin_Part::ID().c_str()) <<
1224 QString(PartSetPlugin_Duplicate::ID().c_str()) <<
1225 QString(PartSetPlugin_Remove::ID().c_str());
1226 if (myWorkshop->currentOperation() &&
1227 (!aAllowActivationList.contains(myWorkshop->currentOperation()->id())))
1229 XGUI_Workshop* aWorkshop = getWorkshop();
1230 XGUI_DataTree* aTreeView = aWorkshop->objectBrowser()->treeView();
1231 QLabel* aLabel = aWorkshop->objectBrowser()->activeDocLabel();
1232 QPalette aPalet = aLabel->palette();
1234 SessionPtr aMgr = ModelAPI_Session::get();
1235 DocumentPtr aActiveDoc = aMgr->activeDocument();
1236 if (myActivePartIndex.isValid())
1237 aTreeView->setExpanded(myActivePartIndex, false);
1238 XGUI_DataModel* aDataModel = aWorkshop->objectBrowser()->dataModel();
1239 myActivePartIndex = aDataModel->documentRootIndex(aActiveDoc);
1240 if (myActivePartIndex.isValid())
1241 aTreeView->setExpanded(myActivePartIndex, true);
1243 aLabel->setPalette(aPalet);
1244 aWorkshop->updateCommandStatus();
1246 // Update displayed objects in order to update active color
1247 XGUI_Displayer* aDisplayer = aWorkshop->displayer();
1248 QObjectPtrList aObjects = aDisplayer->displayedObjects();
1250 foreach(ObjectPtr aObj, aObjects) {
1251 aHidden = !aObj->data() || !aObj->data()->isValid() ||
1252 aObj->isDisabled() || (!aObj->isDisplayed());
1254 aDisplayer->redisplay(aObj, false);
1256 aDisplayer->updateViewer();
1257 } else if (theMessage->eventID() == Events_Loop::loop()->eventByName(EVENT_OBJECT_CREATED)) {
1258 std::shared_ptr<ModelAPI_ObjectUpdatedMessage> aUpdMsg =
1259 std::dynamic_pointer_cast<ModelAPI_ObjectUpdatedMessage>(theMessage);
1260 std::set<ObjectPtr> aObjects = aUpdMsg->objects();
1262 ObjectPtr aConstrObj;
1263 ObjectPtr aResultObj;
1264 std::set<ObjectPtr>::const_iterator aIt;
1265 DocumentPtr aRootDoc = ModelAPI_Session::get()->moduleDocument();
1266 for (aIt = aObjects.begin(); aIt != aObjects.end(); ++aIt) {
1267 ObjectPtr aObject = (*aIt);
1268 if ((!aResultObj.get()) && (aObject->groupName() == ModelAPI_ResultBody::group())
1269 && (aObject->document() != aRootDoc))
1270 aResultObj = aObject;
1271 if ((!aConstrObj.get()) && (aObject->groupName() == ModelAPI_ResultConstruction::group())
1272 && (aObject->document() != aRootDoc))
1273 aConstrObj = aObject;
1274 if (aResultObj.get() && aConstrObj.get())
1278 if (aResultObj.get() || aConstrObj.get()) {
1279 XGUI_Workshop* aWorkshop = getWorkshop();
1280 XGUI_DataTree* aTreeView = aWorkshop->objectBrowser()->treeView();
1281 XGUI_DataModel* aDataModel = aWorkshop->objectBrowser()->dataModel();
1283 if (aResultObj.get()) {
1284 EXPAND_PARENT(aResultObj)
1286 if (aConstrObj.get()) {
1287 EXPAND_PARENT(aConstrObj)
1293 void PartSet_Module::onTreeViewDoubleClick(const QModelIndex& theIndex)
1295 if (myWorkshop->currentOperation()) // Do not change activation of parts if an operation active
1297 SessionPtr aMgr = ModelAPI_Session::get();
1298 if (!theIndex.isValid()) {
1299 // It seems that this code is obsolete
1300 //aMgr->setActiveDocument(aMgr->moduleDocument());
1303 if (theIndex.column() != 0) // Use only first column
1306 XGUI_Workshop* aWorkshop = getWorkshop();
1307 XGUI_DataModel* aDataModel = aWorkshop->objectBrowser()->dataModel();
1308 // De not use non editable Indexes
1309 if ((aDataModel->flags(theIndex) & Qt::ItemIsSelectable) == 0)
1311 ObjectPtr aObj = aDataModel->object(theIndex);
1313 ResultPartPtr aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aObj);
1314 if (!aPart.get()) { // Probably this is Feature
1315 FeaturePtr aPartFeature = std::dynamic_pointer_cast<ModelAPI_Feature>(aObj);
1316 if (aPartFeature.get() && (aPartFeature->getKind() == PartSetPlugin_Part::ID())) {
1317 aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aPartFeature->firstResult());
1320 if (aPart.get()) { // if this is a part
1321 if (aPart->partDoc() == aMgr->activeDocument()) {
1322 myMenuMgr->activatePartSet();
1324 myMenuMgr->activatePart(aPart);
1330 void PartSet_Module::onViewCreated(ModuleBase_IViewWindow*)
1332 // z layer is created for all started operations in order to visualize operation AIS presentation
1334 Handle(AIS_InteractiveContext) aContext = myWorkshop->viewer()->AISContext();
1335 if (aContext.IsNull())
1338 Handle(V3d_Viewer) aViewer = aContext->CurrentViewer();
1339 if (myVisualLayerId == 0) {
1340 if (myVisualLayerId == 0)
1341 aViewer->AddZLayer(myVisualLayerId);
1343 TColStd_SequenceOfInteger aZList;
1344 aViewer->GetAllZLayers(aZList);
1345 bool aFound = false;
1346 for (int i = 1; i <= aZList.Length(); i++) {
1347 if (aZList(i) == myVisualLayerId) {
1353 aViewer->AddZLayer(myVisualLayerId);
1355 // if there is an active operation with validated widget,
1356 // the filters of this widget should be activated in the created view
1357 ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
1359 ModuleBase_ModelWidget* anActiveWidget = activeWidget();
1360 if (anActiveWidget) {
1361 ModuleBase_WidgetSelector* aWSelector =
1362 dynamic_cast<ModuleBase_WidgetSelector*>(anActiveWidget);
1364 aWSelector->activateSelectionAndFilters(true);
1369 //******************************************************
1370 void PartSet_Module::widgetStateChanged(int thePreviousState)
1372 mySketchMgr->widgetStateChanged(thePreviousState);
1375 bool PartSet_Module::processEnter(const std::string& thePreviousAttributeID)
1377 return mySketchReentrantMgr->processEnter(thePreviousAttributeID);
1380 //******************************************************
1381 void PartSet_Module::beforeOperationStopped(ModuleBase_Operation* theOperation)
1383 if (PartSet_SketcherMgr::isSketchOperation(theOperation)) {
1384 mySketchMgr->stopSketch(theOperation);
1388 //******************************************************
1389 GeomShapePtr PartSet_Module::findShape(const AttributePtr& theAttribute)
1391 GeomShapePtr aGeomShape;
1393 ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
1394 if (anOperation && sketchMgr()->isNestedSketchOperation(anOperation)) {
1395 aGeomShape = PartSet_Tools::findShapeBy2DPoint(theAttribute, myWorkshop);
1400 //******************************************************
1401 AttributePtr PartSet_Module::findAttribute(const ObjectPtr& theObject,
1402 const GeomShapePtr& theGeomShape)
1404 AttributePtr anAttribute;
1405 GeomShapePtr aGeomShape = theGeomShape;
1406 if (!aGeomShape.get()) {
1407 // processing shape of result, e.g. sketch circle center is selected, this is a result
1408 // the geom shape is empty, the shape of result should be used
1409 ResultPtr aResult = std::dynamic_pointer_cast<ModelAPI_Result>(theObject);
1410 if (aResult.get()) {
1411 aGeomShape = aResult->shape();
1415 if (aGeomShape.get()) {
1416 TopoDS_Shape aTDSShape = aGeomShape->impl<TopoDS_Shape>();
1417 return PartSet_Tools::findAttributeBy2dPoint(theObject, aTDSShape,
1418 mySketchMgr->activeSketch());
1423 //******************************************************
1424 std::shared_ptr<Events_Message> PartSet_Module::reentrantMessage()
1426 return sketchReentranceMgr()->reentrantMessage();
1429 //******************************************************
1430 void PartSet_Module::setReentrantPreSelection(const std::shared_ptr<Events_Message>& theMessage)
1432 sketchReentranceMgr()->setReentrantPreSelection(theMessage);
1435 //******************************************************
1436 void PartSet_Module::onChoiceChanged(ModuleBase_ModelWidget* theWidget,
1439 PartSet_WidgetChoice* aChoiceWidget = dynamic_cast<PartSet_WidgetChoice*>(theWidget);
1443 QString aChoiceTitle = aChoiceWidget->getPropertyPanelTitle(theIndex);
1444 if (!aChoiceTitle.isEmpty()) {
1445 ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
1448 ModuleBase_IPropertyPanel* aPanel = aOperation->propertyPanel();
1450 aPanel->setWindowTitle(aChoiceTitle);
1454 //******************************************************
1455 XGUI_Workshop* PartSet_Module::getWorkshop() const
1457 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
1458 return aConnector->workshop();
1461 //******************************************************
1462 void PartSet_Module::setDefaultConstraintShown()
1464 myHasConstraintShown[PartSet_Tools::Geometrical] = true;
1465 myHasConstraintShown[PartSet_Tools::Dimensional] = true;
1466 myHasConstraintShown[PartSet_Tools::Expressions] = false;