1 // Copyright (C) 2014-20xx CEA/DEN, EDF R&D
3 #include "PartSet_Module.h"
4 #include "PartSet_WidgetSketchLabel.h"
5 #include "PartSet_Validators.h"
6 #include "PartSet_Tools.h"
7 #include "ModuleBase_WidgetValidated.h"
8 #include "PartSet_WidgetPoint2d.h"
9 #include "PartSet_WidgetPoint2dDistance.h"
10 #include "PartSet_WidgetShapeSelector.h"
11 #include "PartSet_WidgetPoint2dAngle.h"
12 #include "PartSet_WidgetMultiSelector.h"
13 #include "PartSet_WidgetEditor.h"
14 #include "PartSet_WidgetFileSelector.h"
15 #include "PartSet_WidgetSketchCreator.h"
16 #include "PartSet_SketcherMgr.h"
17 #include "PartSet_MenuMgr.h"
18 #include "PartSet_CustomPrs.h"
19 #include "PartSet_IconFactory.h"
21 #include "PartSet_Filters.h"
22 #include "PartSet_FilterInfinite.h"
24 #include <PartSetPlugin_Remove.h>
25 #include <PartSetPlugin_Part.h>
26 #include <PartSetPlugin_Duplicate.h>
28 #include <ModuleBase_Operation.h>
29 #include <ModuleBase_IViewer.h>
30 #include <ModuleBase_IViewWindow.h>
31 #include <ModuleBase_IPropertyPanel.h>
32 #include <ModuleBase_WidgetEditor.h>
33 #include <ModuleBase_FilterFactory.h>
34 #include <ModuleBase_Tools.h>
35 #include <GeomValidators_ShapeType.h>
37 #include <GeomValidators_Face.h>
38 #include <GeomValidators_ConstructionComposite.h>
39 #include <GeomValidators_ZeroOffset.h>
40 #include <GeomValidators_BooleanArguments.h>
41 #include <GeomValidators_Different.h>
44 #include <ModelAPI_Object.h>
45 #include <ModelAPI_Events.h>
46 #include <ModelAPI_Validator.h>
47 #include <ModelAPI_Data.h>
48 #include <ModelAPI_Session.h>
49 #include <ModelAPI_ShapeValidator.h>
51 #include <GeomDataAPI_Point2D.h>
52 #include <GeomDataAPI_Point.h>
53 #include <GeomDataAPI_Dir.h>
55 #include <XGUI_Displayer.h>
56 #include <XGUI_Workshop.h>
57 #include <XGUI_OperationMgr.h>
58 #include <XGUI_PropertyPanel.h>
59 #include <XGUI_ModuleConnector.h>
60 #include <XGUI_ContextMenuMgr.h>
61 #include <XGUI_Tools.h>
62 #include <XGUI_ObjectsBrowser.h>
63 #include <XGUI_SelectionMgr.h>
64 #include <XGUI_DataModel.h>
66 #include <SketchPlugin_Feature.h>
67 #include <SketchPlugin_Sketch.h>
68 #include <SketchPlugin_Line.h>
69 #include <SketchPlugin_Arc.h>
70 #include <SketchPlugin_Circle.h>
71 #include <SketchPlugin_Point.h>
72 #include <SketchPlugin_ConstraintLength.h>
73 #include <SketchPlugin_ConstraintDistance.h>
74 #include <SketchPlugin_ConstraintParallel.h>
75 #include <SketchPlugin_ConstraintPerpendicular.h>
76 #include <SketchPlugin_ConstraintRadius.h>
78 #include <SketcherPrs_SymbolPrs.h>
79 #include <SketcherPrs_Tools.h>
81 #include <Events_Loop.h>
82 #include <Config_PropManager.h>
83 #include <Config_Keywords.h>
85 #include <StdSelect_TypeOfFace.hxx>
86 #include <TopoDS_Vertex.hxx>
88 #include <TopoDS_Shape.hxx>
89 #include <BRep_Tool.hxx>
90 #include <AIS_Dimension.hxx>
93 #include <QMouseEvent>
96 #include <QApplication>
97 #include <QMessageBox>
98 #include <QMainWindow>
101 #include <GeomAlgoAPI_FaceBuilder.h>
102 #include <GeomDataAPI_Dir.h>
104 #include <SelectMgr_ListIteratorOfListOfFilter.hxx>
112 /*!Create and return new instance of XGUI_Module*/
113 extern "C" PARTSET_EXPORT ModuleBase_IModule* createModule(ModuleBase_IWorkshop* theWshop)
115 return new PartSet_Module(theWshop);
118 PartSet_Module::PartSet_Module(ModuleBase_IWorkshop* theWshop)
119 : ModuleBase_IModule(theWshop),
120 myRestartingMode(RM_None), myVisualLayerId(0)
122 new PartSet_IconFactory();
124 mySketchMgr = new PartSet_SketcherMgr(this);
125 myDataModel = new PartSet_DocumentDataModel(this);
127 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(theWshop);
128 XGUI_Workshop* aWorkshop = aConnector->workshop();
130 XGUI_OperationMgr* anOpMgr = aWorkshop->operationMgr();
131 connect(anOpMgr, SIGNAL(keyEnterReleased()), this, SLOT(onEnterReleased()));
132 connect(anOpMgr, SIGNAL(operationActivatedByPreselection()),
133 this, SLOT(onOperationActivatedByPreselection()));
135 ModuleBase_IViewer* aViewer = theWshop->viewer();
136 connect(aViewer, SIGNAL(keyRelease(ModuleBase_IViewWindow*, QKeyEvent*)),
137 this, SLOT(onKeyRelease(ModuleBase_IViewWindow*, QKeyEvent*)));
138 connect(aViewer, SIGNAL(viewTransformed(int)),
139 SLOT(onViewTransformed(int)));
140 connect(aViewer, SIGNAL(viewCreated(ModuleBase_IViewWindow*)),
141 SLOT(onViewCreated(ModuleBase_IViewWindow*)));
143 myMenuMgr = new PartSet_MenuMgr(this);
144 myCustomPrs = new PartSet_CustomPrs(theWshop);
146 Events_Loop* aLoop = Events_Loop::loop();
147 aLoop->registerListener(this, Events_Loop::eventByName(EVENT_DOCUMENT_CHANGED));
149 mySelectionFilters.Append(new PartSet_GlobalFilter(myWorkshop));
150 mySelectionFilters.Append(new PartSet_FilterInfinite(myWorkshop));
153 PartSet_Module::~PartSet_Module()
155 SelectMgr_ListIteratorOfListOfFilter aIt(mySelectionFilters);
156 for (; aIt.More(); aIt.Next()) {
157 Handle(SelectMgr_Filter) aFilter = aIt.Value();
158 if (!aFilter.IsNull())
164 void PartSet_Module::activateSelectionFilters()
166 SelectMgr_ListIteratorOfListOfFilter aIt(mySelectionFilters);
167 for (; aIt.More(); aIt.Next()) {
168 Handle(SelectMgr_Filter) aFilter = aIt.Value();
169 if (!aFilter.IsNull())
170 myWorkshop->viewer()->addSelectionFilter(aFilter);
174 void PartSet_Module::deactivateSelectionFilters()
176 SelectMgr_ListIteratorOfListOfFilter aIt(mySelectionFilters);
177 for (; aIt.More(); aIt.Next()) {
178 Handle(SelectMgr_Filter) aFilter = aIt.Value();
179 if (!aFilter.IsNull())
180 myWorkshop->viewer()->removeSelectionFilter(aFilter);
184 void PartSet_Module::registerValidators()
186 //Registering of validators
187 SessionPtr aMgr = ModelAPI_Session::get();
188 ModelAPI_ValidatorsFactory* aFactory = aMgr->validators();
189 aFactory->registerValidator("PartSet_DistanceSelection", new PartSet_DistanceSelection);
190 aFactory->registerValidator("PartSet_LengthSelection", new PartSet_LengthSelection);
191 aFactory->registerValidator("PartSet_PerpendicularSelection", new PartSet_PerpendicularSelection);
192 aFactory->registerValidator("PartSet_ParallelSelection", new PartSet_ParallelSelection);
193 aFactory->registerValidator("PartSet_RadiusSelection", new PartSet_RadiusSelection);
194 aFactory->registerValidator("PartSet_RigidSelection", new PartSet_RigidSelection);
195 aFactory->registerValidator("PartSet_CoincidentSelection", new PartSet_CoincidentSelection);
196 aFactory->registerValidator("PartSet_HVDirSelection", new PartSet_HVDirSelection);
197 aFactory->registerValidator("PartSet_TangentSelection", new PartSet_TangentSelection);
198 aFactory->registerValidator("PartSet_FilletSelection", new PartSet_FilletSelection);
200 aFactory->registerValidator("PartSet_DifferentObjects", new PartSet_DifferentObjectsValidator);
201 aFactory->registerValidator("PartSet_DifferentShapes", new ModelAPI_ShapeValidator);
203 aFactory->registerValidator("PartSet_CoincidentAttr", new PartSet_CoincidentAttr);
205 aFactory->registerValidator("GeomValidators_ShapeType", new GeomValidators_ShapeType);
206 aFactory->registerValidator("GeomValidators_Face", new GeomValidators_Face);
208 aFactory->registerValidator("GeomValidators_ConstructionComposite",
209 new GeomValidators_ConstructionComposite);
211 aFactory->registerValidator("GeomValidators_ZeroOffset",
212 new GeomValidators_ZeroOffset);
214 aFactory->registerValidator("GeomValidators_BooleanArguments",
215 new GeomValidators_BooleanArguments);
217 aFactory->registerValidator("PartSet_SketchEntityValidator",
218 new PartSet_SketchEntityValidator);
220 aFactory->registerValidator("PartSet_SameTypeAttr",
221 new PartSet_SameTypeAttrValidator);
223 aFactory->registerValidator("GeomValidators_Different",
224 new GeomValidators_Different);
227 void PartSet_Module::registerFilters()
229 //Registering of selection filters
230 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
231 ModuleBase_FilterFactory* aFactory = aConnector->selectionFilters();
234 void PartSet_Module::registerProperties()
236 Config_PropManager::registerProp("Sketch planes", "planes_size", "Size", Config_Prop::Double,
238 Config_PropManager::registerProp("Sketch planes", "planes_thickness", "Thickness",
239 Config_Prop::Integer, SKETCH_WIDTH);
242 void PartSet_Module::onOperationCommitted(ModuleBase_Operation* theOperation)
244 if (PartSet_SketcherMgr::isNestedSketchOperation(theOperation)) {
245 mySketchMgr->commitNestedSketch(theOperation);
248 if (theOperation->isEditOperation())
250 // the selection is cleared after commit the create operation
251 // in order to do not use the same selected objects in the restarted operation
252 // for common behaviour, the selection is cleared even if the operation is not restarted
253 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
254 XGUI_Workshop* aWorkshop = aConnector->workshop();
255 aWorkshop->selector()->clearSelection();
257 /// Restart sketcher operations automatically
258 FeaturePtr aFeature = theOperation->feature();
259 std::shared_ptr<SketchPlugin_Feature> aSPFeature =
260 std::dynamic_pointer_cast<SketchPlugin_Feature>(aFeature);
261 if (aSPFeature && (myRestartingMode == RM_LastFeatureUsed ||
262 myRestartingMode == RM_EmptyFeatureUsed)) {
263 myLastOperationId = theOperation->id();
264 myLastFeature = myRestartingMode == RM_LastFeatureUsed ? theOperation->feature() : FeaturePtr();
266 launchOperation(myLastOperationId);
268 breakOperationSequence();
271 void PartSet_Module::breakOperationSequence()
273 myLastOperationId = "";
274 myLastFeature = FeaturePtr();
275 myRestartingMode = RM_None;
278 void PartSet_Module::onOperationAborted(ModuleBase_Operation* theOperation)
280 breakOperationSequence();
283 void PartSet_Module::onOperationStarted(ModuleBase_Operation* theOperation)
285 if (PartSet_SketcherMgr::isSketchOperation(theOperation)) {
286 mySketchMgr->startSketch(theOperation);
288 else if (PartSet_SketcherMgr::isNestedSketchOperation(theOperation)) {
289 mySketchMgr->startNestedSketch(theOperation);
292 myCustomPrs->activate(theOperation->feature());
295 void PartSet_Module::onOperationStopped(ModuleBase_Operation* theOperation)
297 myCustomPrs->deactivate();
299 if (PartSet_SketcherMgr::isSketchOperation(theOperation)) {
300 mySketchMgr->stopSketch(theOperation);
302 else if (PartSet_SketcherMgr::isNestedSketchOperation(theOperation)) {
303 mySketchMgr->stopNestedSketch(theOperation);
307 ModuleBase_Operation* PartSet_Module::currentOperation() const
309 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
310 XGUI_OperationMgr* anOpMgr = aConnector->workshop()->operationMgr();
311 return anOpMgr->currentOperation();
314 bool PartSet_Module::canUndo() const
316 bool aCanUndo = false;
317 SessionPtr aMgr = ModelAPI_Session::get();
318 if (aMgr->hasModuleDocument() && aMgr->canUndo()) {
319 aCanUndo = !aMgr->isOperation();
320 if (!aCanUndo) // check the enable state additionally by sketch manager
321 aCanUndo = aMgr->canUndo();
326 bool PartSet_Module::canRedo() const
328 bool aCanRedo = false;
329 SessionPtr aMgr = ModelAPI_Session::get();
330 if (aMgr->hasModuleDocument() && aMgr->canRedo()) {
331 aCanRedo = !aMgr->isOperation();
332 if (!aCanRedo) // check the enable state additionally by sketch manager
333 aCanRedo = aMgr->canRedo();
338 bool PartSet_Module::canApplyAction(const ObjectPtr& theObject, const QString& theActionId) const
341 if (theActionId == "DELETE_CMD" || theActionId == "MOVE_CMD") {
342 FeaturePtr aFeature = ModelAPI_Feature::feature(theObject);
344 // part features are removed in the PartSet module only.
345 if (aFeature->getKind() == PartSetPlugin_Part::ID())
352 bool PartSet_Module::canCommitOperation() const
354 return mySketchMgr->canCommitOperation();
357 bool PartSet_Module::canDisplayObject(const ObjectPtr& theObject) const
359 // the sketch manager put the restriction to the objects display
360 return mySketchMgr->canDisplayObject(theObject);
363 bool PartSet_Module::canActivateSelection(const ObjectPtr& theObject) const
365 bool aCanActivate = ModuleBase_IModule::canActivateSelection(theObject);
367 ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
368 bool isSketchOp = PartSet_SketcherMgr::isSketchOperation(anOperation),
369 isNestedOp = PartSet_SketcherMgr::isNestedSketchOperation(anOperation);
370 if (isSketchOp || isNestedOp) {
371 // in active sketch operation it is possible to activate operation object in selection
372 // in the edit operation, e.g. points of the line can be moved when the line is edited
373 aCanActivate = aCanActivate || anOperation->isEditOperation();
378 bool PartSet_Module::addViewerMenu(QMenu* theMenu, const QMap<QString, QAction*>& theStdActions) const
380 return myMenuMgr->addViewerMenu(theMenu, theStdActions);
383 void PartSet_Module::updateViewerMenu(const QMap<QString, QAction*>& theStdActions)
385 myMenuMgr->updateViewerMenu(theStdActions);
389 void PartSet_Module::activeSelectionModes(QIntList& theModes)
392 if (mySketchMgr->activeSketch().get())
393 PartSet_SketcherMgr::sketchSelectionModes(theModes);
396 bool PartSet_Module::isMouseOverWindow()
398 return mySketchMgr->isMouseOverWindow();
401 void PartSet_Module::propertyPanelDefined(ModuleBase_Operation* theOperation)
403 ModuleBase_IPropertyPanel* aPanel = theOperation->propertyPanel();
404 if (PartSet_SketcherMgr::isSketchOperation(theOperation) && (theOperation->isEditOperation())) {
405 // we have to manually activate the sketch label in edit mode
406 aPanel->activateWidget(aPanel->modelWidgets().first());
410 // Restart last operation type
411 if ((theOperation->id() == myLastOperationId) && myLastFeature) {
412 ModuleBase_ModelWidget* aWgt = aPanel->activeWidget();
413 if (theOperation->id().toStdString() == SketchPlugin_Line::ID()) {
414 // Initialise new line with first point equal to end of previous
415 PartSet_WidgetPoint2D* aPnt2dWgt = dynamic_cast<PartSet_WidgetPoint2D*>(aWgt);
417 std::shared_ptr<ModelAPI_Data> aData = myLastFeature->data();
418 std::shared_ptr<GeomDataAPI_Point2D> aPoint =
419 std::dynamic_pointer_cast<GeomDataAPI_Point2D>(aData->attribute(SketchPlugin_Line::END_ID()));
421 aPnt2dWgt->setPoint(aPoint->x(), aPoint->y());
422 PartSet_Tools::setConstraints(mySketchMgr->activeSketch(), theOperation->feature(),
423 aWgt->attributeID(), aPoint->x(), aPoint->y());
424 aPanel->activateNextWidget(aPnt2dWgt);
432 void PartSet_Module::onSelectionChanged()
434 ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
438 bool isSketcherOp = false;
439 // An edit operation is enable only if the current opeation is the sketch operation
440 if (mySketchMgr->activeSketch()) {
441 if (PartSet_Tools::sketchPlane(mySketchMgr->activeSketch()))
442 isSketcherOp = PartSet_SketcherMgr::isSketchOperation(aOperation);
445 // Editing of constraints can be done on selection
446 ModuleBase_ISelection* aSelect = myWorkshop->selection();
447 QList<ModuleBase_ViewerPrs> aSelected = aSelect->getSelected();
448 if (aSelected.size() == 1) {
449 ModuleBase_ViewerPrs aPrs = aSelected.first();
450 ObjectPtr aObject = aPrs.object();
451 FeaturePtr aFeature = ModelAPI_Feature::feature(aObject);
453 std::string aId = aFeature->getKind();
454 if ((aId == SketchPlugin_ConstraintRadius::ID()) ||
455 (aId == SketchPlugin_ConstraintLength::ID()) ||
456 (aId == SketchPlugin_ConstraintDistance::ID())) {
457 editFeature(aFeature);
464 void PartSet_Module::onKeyRelease(ModuleBase_IViewWindow* theWnd, QKeyEvent* theEvent)
466 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
467 XGUI_OperationMgr* anOpMgr = aConnector->workshop()->operationMgr();
468 anOpMgr->onKeyReleased(theEvent);
471 void PartSet_Module::onEnterReleased()
473 myRestartingMode = RM_EmptyFeatureUsed;
476 void PartSet_Module::onOperationActivatedByPreselection()
478 ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
479 if(anOperation && PartSet_SketcherMgr::isNestedSketchOperation(anOperation)) {
480 // Set final definitions if they are necessary
481 //propertyPanelDefined(aOperation);
483 /// Commit sketcher operations automatically
484 anOperation->commit();
488 void PartSet_Module::onNoMoreWidgets()
490 ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
492 if (PartSet_SketcherMgr::isNestedSketchOperation(anOperation)) {
493 if (myRestartingMode != RM_Forbided)
494 myRestartingMode = RM_LastFeatureUsed;
495 anOperation->commit();
500 void PartSet_Module::onVertexSelected()
502 ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
503 if (aOperation->id().toStdString() == SketchPlugin_Line::ID()) {
504 /// If last line finished on vertex the lines creation sequence has to be break
505 ModuleBase_IPropertyPanel* aPanel = aOperation->propertyPanel();
506 ModuleBase_ModelWidget* anActiveWidget = aPanel->activeWidget();
507 const QList<ModuleBase_ModelWidget*>& aWidgets = aPanel->modelWidgets();
508 QList<ModuleBase_ModelWidget*>::const_iterator anIt = aWidgets.begin(), aLast = aWidgets.end();
509 bool aFoundWidget = false;
510 bool aFoundObligatory = false;
511 for (; anIt != aLast && !aFoundObligatory; anIt++) {
513 aFoundWidget = *anIt == anActiveWidget;
515 aFoundObligatory = (*anIt)->isObligatory();
517 if (!aFoundObligatory)
518 myRestartingMode = RM_Forbided;
522 ModuleBase_ModelWidget* PartSet_Module::createWidgetByType(const std::string& theType, QWidget* theParent,
523 Config_WidgetAPI* theWidgetApi, std::string theParentId)
525 ModuleBase_IWorkshop* aWorkshop = workshop();
526 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(aWorkshop);
527 XGUI_Workshop* aXUIWorkshop = aConnector->workshop();
528 ModuleBase_ModelWidget* aWgt = NULL;
529 if (theType == "sketch-start-label") {
530 PartSet_WidgetSketchLabel* aLabelWgt = new PartSet_WidgetSketchLabel(theParent, aWorkshop,
531 theWidgetApi, theParentId, mySketchMgr->isConstraintsShown());
532 connect(aLabelWgt, SIGNAL(planeSelected(const std::shared_ptr<GeomAPI_Pln>&)),
533 mySketchMgr, SLOT(onPlaneSelected(const std::shared_ptr<GeomAPI_Pln>&)));
534 connect(aLabelWgt, SIGNAL(showConstraintToggled(bool)),
535 mySketchMgr, SLOT(onShowConstraintsToggle(bool)));
537 } else if (theType == "sketch-2dpoint_selector") {
538 PartSet_WidgetPoint2D* aPointWgt = new PartSet_WidgetPoint2D(theParent, aWorkshop,
539 theWidgetApi, theParentId);
540 aPointWgt->setSketch(mySketchMgr->activeSketch());
541 connect(aPointWgt, SIGNAL(vertexSelected()), this, SLOT(onVertexSelected()));
543 } else if (theType == "point2ddistance") {
544 PartSet_WidgetPoint2dDistance* aDistanceWgt = new PartSet_WidgetPoint2dDistance(theParent,
545 aWorkshop, theWidgetApi, theParentId);
546 aDistanceWgt->setSketch(mySketchMgr->activeSketch());
548 } else if(theType == "point2dangle") {
549 PartSet_WidgetPoint2dAngle* anAngleWgt = new PartSet_WidgetPoint2dAngle(theParent,
550 aWorkshop, theWidgetApi, theParentId);
551 anAngleWgt->setSketch(mySketchMgr->activeSketch());
553 } else if (theType == "sketch_shape_selector") {
554 PartSet_WidgetShapeSelector* aShapeSelectorWgt =
555 new PartSet_WidgetShapeSelector(theParent, aWorkshop, theWidgetApi, theParentId);
556 aShapeSelectorWgt->setSketcher(mySketchMgr->activeSketch());
557 aWgt = aShapeSelectorWgt;
558 } else if (theType == "sketch_multi_selector") {
559 PartSet_WidgetMultiSelector* aShapeSelectorWgt =
560 new PartSet_WidgetMultiSelector(theParent, aWorkshop, theWidgetApi, theParentId);
561 aShapeSelectorWgt->setSketcher(mySketchMgr->activeSketch());
562 aWgt = aShapeSelectorWgt;
563 } else if (theType == WDG_DOUBLEVALUE_EDITOR) {
564 aWgt = new PartSet_WidgetEditor(theParent, aWorkshop, theWidgetApi, theParentId);
565 } else if (theType == "export_file_selector") {
566 aWgt = new PartSet_WidgetFileSelector(theParent, aWorkshop, theWidgetApi, theParentId);
567 } else if (theType == "sketch_launcher") {
568 aWgt = new PartSet_WidgetSketchCreator(theParent, this, theWidgetApi, theParentId);
574 bool PartSet_Module::deleteObjects()
576 SessionPtr aMgr = ModelAPI_Session::get();
577 // 1. check whether the delete should be processed in the module
578 ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
579 bool isSketchOp = PartSet_SketcherMgr::isSketchOperation(anOperation),
580 isNestedOp = PartSet_SketcherMgr::isNestedSketchOperation(anOperation);
581 if (isSketchOp || isNestedOp) {
582 // 2. find selected presentations
583 // selected objects should be collected before the current operation abort because
584 // the abort leads to selection lost on constraint objects. It can be corrected after #386 issue
585 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
586 XGUI_Workshop* aWorkshop = aConnector->workshop();
587 ModuleBase_ISelection* aSel = workshop()->selection();
588 QObjectPtrList aSelectedObj = aSel->selectedPresentations();
589 // if there are no selected objects in the viewer, that means that the selection in another
590 // place cased this method. It is necessary to return the false value to understande in above
591 // method that delete is not processed
592 if (aSelectedObj.count() == 0)
595 // avoid delete of the objects, which are not belong to the current sketch
596 // in order to do not delete results of other sketches
597 QObjectPtrList aSketchObjects;
598 QObjectPtrList::const_iterator anIt = aSelectedObj.begin(), aLast = aSelectedObj.end();
599 for ( ; anIt != aLast; anIt++) {
600 ObjectPtr anObject = *anIt;
601 if (mySketchMgr->isObjectOfSketch(anObject)) {
602 // sketch feature should be used in this list because workshop deletes features only
603 // results are skipped
604 FeaturePtr aSketchFeature = ModelAPI_Feature::feature(anObject);
605 aSketchObjects.append(aSketchFeature);
608 // if the selection contains only local selected presentations from other sketches,
609 // the Delete operation should not be done at all
610 if (aSketchObjects.size() == 0)
613 // the active nested sketch operation should be aborted unconditionally
615 anOperation->abort();
617 // 3. start operation
618 QString aDescription = aWorkshop->contextMenuMgr()->action("DELETE_CMD")->text();
619 aMgr->startOperation(aDescription.toStdString());
621 // 4. delete features
622 // sketch feature should be skipped, only sub-features can be removed
623 // when sketch operation is active
624 aWorkshop->deleteFeatures(aSketchObjects);
626 aWorkshop->displayer()->updateViewer();
627 aMgr->finishOperation();
629 bool isPartRemoved = false;
630 // Delete part with help of PartSet plugin
631 // TODO: the deleted objects has to be processed by multiselection
632 QObjectPtrList aObjects = myWorkshop->selection()->selectedObjects();
633 if (aObjects.size() == 1) {
634 ObjectPtr aObj = aObjects.first();
635 FeaturePtr aFeature = std::dynamic_pointer_cast<ModelAPI_Feature>(aObj);
636 if (aFeature.get() && (aFeature->getKind() == PartSetPlugin_Part::ID())) {
637 // Remove feature should be created in the document of the part results
638 ResultPtr aPartResult = aFeature->firstResult();
639 if (aPartResult.get()) {
640 std::shared_ptr<ModelAPI_ResultPart> aPart =
641 std::dynamic_pointer_cast<ModelAPI_ResultPart>(aPartResult);
642 DocumentPtr aPartDoc = aPart->partDoc();
643 if (aPartDoc.get()) {
644 aMgr->startOperation(PartSetPlugin_Remove::ID());
645 FeaturePtr aFeature = aPartDoc->addFeature(PartSetPlugin_Remove::ID());
647 aMgr->finishOperation();
648 isPartRemoved = true;
653 return isPartRemoved;
658 void PartSet_Module::onFeatureTriggered()
660 SessionPtr aMgr = ModelAPI_Session::get();
661 // 1. check whether the delete should be processed in the module
662 ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
663 bool isNestedOp = PartSet_SketcherMgr::isNestedCreateOperation(anOperation);
665 // in case if in the viewer nothing is displayed, the create operation should not be
666 // comitted even if all values of the feature are initialized
667 if (!mySketchMgr->canDisplayCurrentCreatedFeature()) {
668 QAction* aCmd = dynamic_cast<QAction*>(sender());
669 //Do nothing on uncheck
670 if (aCmd->isCheckable() && !aCmd->isChecked())
673 // the action information should be saved before the operation is aborted
674 // because this abort leads to update command status, which unchecks this action
675 anOperation->abort();
677 launchOperation(aCmd->data().toString());
680 ModuleBase_IModule::onFeatureTriggered();
683 void PartSet_Module::onObjectDisplayed(ObjectPtr theObject, AISObjectPtr theAIS)
685 Handle(AIS_InteractiveObject) anAIS = theAIS->impl<Handle(AIS_InteractiveObject)>();
686 if (!anAIS.IsNull()) {
687 Handle(AIS_InteractiveContext) aCtx = anAIS->GetContext();
688 Handle(AIS_Dimension) aDim = Handle(AIS_Dimension)::DownCast(anAIS);
689 if (!aDim.IsNull()) {
690 aCtx->SetZLayer(aDim, myVisualLayerId);
692 Handle(SketcherPrs_SymbolPrs) aCons = Handle(SketcherPrs_SymbolPrs)::DownCast(anAIS);
694 aCtx->SetZLayer(aCons, myVisualLayerId);
699 void PartSet_Module::onViewTransformed(int theTrsfType)
701 // Set length of arrows constant in pixel size
702 // if the operation is panning or rotate or panglobal then do nothing
703 if ((theTrsfType == 1) || (theTrsfType == 3) || (theTrsfType == 4))
706 ModuleBase_IViewer* aViewer = myWorkshop->viewer();
707 //Handle(V3d_View) aView = aViewer->activeView();
709 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(myWorkshop);
710 XGUI_Workshop* aWorkshop = aConnector->workshop();
711 XGUI_Displayer* aDisplayer = aWorkshop->displayer();
712 Handle(AIS_InteractiveContext) aContext = aViewer->AISContext();
714 Handle(V3d_Viewer) aV3dViewer = aContext->CurrentViewer();
715 Handle(V3d_View) aView;
717 for (aV3dViewer->InitDefinedViews();
718 aV3dViewer->MoreDefinedViews();
719 aV3dViewer->NextDefinedViews()) {
720 Handle(V3d_View) aV = aV3dViewer->DefinedView();
721 double aS = aV->Scale();
729 double aLen = aView->Convert(20);
731 double aPrevLen = SketcherPrs_Tools::getArrowSize();
732 SketcherPrs_Tools::setArrowSize(aLen);
733 const double aPrevScale = aViewer->Scale(aViewer->activeView());
734 const double aCurScale = aViewer->activeView()->Camera()->Scale();
735 aViewer->SetScale(aViewer->activeView(), aCurScale);
736 SketcherPrs_Tools::setTextHeight (aCurScale / aPrevScale * SketcherPrs_Tools::getTextHeight());
737 bool isModified = false;
738 QList<AISObjectPtr> aPrsList = aDisplayer->displayedPresentations();
739 foreach (AISObjectPtr aAIS, aPrsList) {
740 Handle(AIS_InteractiveObject) aAisObj = aAIS->impl<Handle(AIS_InteractiveObject)>();
742 Handle(AIS_Dimension) aDim = Handle(AIS_Dimension)::DownCast(aAisObj);
743 if (!aDim.IsNull()) {
744 aDim->DimensionAspect()->ArrowAspect()->SetLength(aLen);
745 aContext->Redisplay(aDim, false);
750 aDisplayer->updateViewer();
753 void PartSet_Module::customizeObject(ObjectPtr theObject)
755 if (myCustomPrs->isActive())
756 myCustomPrs->customize(theObject);
759 void PartSet_Module::customizeObjectBrowser(QWidget* theObjectBrowser)
761 XGUI_ObjectsBrowser* aOB = dynamic_cast<XGUI_ObjectsBrowser*>(theObjectBrowser);
763 QLineEdit* aLabel = aOB->activeDocLabel();
764 QPalette aPalet = aLabel->palette();
765 aPalet.setColor(QPalette::Text, QColor(0, 72, 140));
766 aLabel->setPalette(aPalet);
767 aOB->treeView()->setExpandsOnDoubleClick(false);
768 #ifdef ModuleDataModel
769 connect(aOB->treeView(), SIGNAL(doubleClicked(const QModelIndex&)),
770 SLOT(onTreeViewDoubleClick(const QModelIndex&)));
771 connect(aOB, SIGNAL(headerMouseDblClicked(const QModelIndex&)),
772 SLOT(onTreeViewDoubleClick(const QModelIndex&)));
773 connect(aOB->treeView(), SIGNAL(doubleClicked(const QModelIndex&)),
774 myDataModel, SLOT(onMouseDoubleClick(const QModelIndex&)));
779 ObjectPtr PartSet_Module::findPresentedObject(const AISObjectPtr& theAIS) const
782 ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
784 /// If last line finished on vertex the lines creation sequence has to be break
785 ModuleBase_IPropertyPanel* aPanel = aOperation->propertyPanel();
786 ModuleBase_ModelWidget* anActiveWidget = aPanel->activeWidget();
787 // if there is an active widget, find the presented object in it
789 anActiveWidget = aPanel->preselectionWidget();
791 ModuleBase_WidgetValidated* aWidgetValidated = dynamic_cast<ModuleBase_WidgetValidated*>
793 if (aWidgetValidated)
794 anObject = aWidgetValidated->findPresentedObject(theAIS);
799 void PartSet_Module::addObjectBrowserMenu(QMenu* theMenu) const
801 QObjectPtrList aObjects = myWorkshop->selection()->selectedObjects();
802 int aSelected = aObjects.size();
803 SessionPtr aMgr = ModelAPI_Session::get();
804 if (aSelected == 1) {
805 bool hasResult = false;
806 bool hasFeature = false;
807 bool hasParameter = false;
808 bool hasSubFeature = false;
809 ModuleBase_Tools::checkObjects(aObjects, hasResult, hasFeature, hasParameter, hasSubFeature);
811 ObjectPtr aObject = aObjects.first();
813 ResultPartPtr aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aObject);
814 FeaturePtr aPartFeature = std::dynamic_pointer_cast<ModelAPI_Feature>(aObject);
815 bool isPart = aPart.get() ||
816 (aPartFeature.get() && (aPartFeature->getKind() == PartSetPlugin_Part::ID()));
818 DocumentPtr aPartDoc;
820 aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aPartFeature->firstResult());
822 if (aPart.get()) // this may be null is Part feature is disabled
823 aPartDoc = aPart->partDoc();
824 if (aMgr->activeDocument() == aPartDoc)
825 theMenu->addAction(myMenuMgr->action("DEACTIVATE_PART_CMD"));
827 theMenu->addAction(myMenuMgr->action("ACTIVATE_PART_CMD"));
828 } else if (aObject->document() == aMgr->activeDocument()) {
829 if (hasParameter || hasFeature)
830 theMenu->addAction(myMenuMgr->action("EDIT_CMD"));
832 } else { // If feature is 0 the it means that selected root object (document)
833 if (aMgr->activeDocument() != aMgr->moduleDocument())
834 theMenu->addAction(myMenuMgr->action("ACTIVATE_PARTSET_CMD"));
836 } else if (aSelected == 0) {
837 // if there is no selection then it means that upper label is selected
838 QModelIndexList aIndexes = myWorkshop->selection()->selectedIndexes();
839 if (aIndexes.size() == 0) // it means that selection happens in top label outside of tree view
840 if (aMgr->activeDocument() != aMgr->moduleDocument())
841 theMenu->addAction(myMenuMgr->action("ACTIVATE_PARTSET_CMD"));
843 bool aCanDeactivate = (myWorkshop->currentOperation() == 0);
844 myMenuMgr->action("ACTIVATE_PARTSET_CMD")->setEnabled(aCanDeactivate);
845 myMenuMgr->action("DEACTIVATE_PART_CMD")->setEnabled(aCanDeactivate);
846 myMenuMgr->action("ACTIVATE_PART_CMD")->setEnabled(aCanDeactivate);
849 void PartSet_Module::processEvent(const std::shared_ptr<Events_Message>& theMessage)
851 if (theMessage->eventID() == Events_Loop::loop()->eventByName(EVENT_DOCUMENT_CHANGED)) {
852 // Do not change activation of parts if an operation active
853 static QStringList aAllowActivationList;
854 if (aAllowActivationList.isEmpty())
855 aAllowActivationList <<
856 QString(PartSetPlugin_Part::ID().c_str()) <<
857 QString(PartSetPlugin_Duplicate::ID().c_str()) <<
858 QString(PartSetPlugin_Remove::ID().c_str());
859 if (myWorkshop->currentOperation() &&
860 (!aAllowActivationList.contains(myWorkshop->currentOperation()->id())))
862 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(myWorkshop);
863 XGUI_Workshop* aWorkshop = aConnector->workshop();
864 XGUI_DataTree* aTreeView = aWorkshop->objectBrowser()->treeView();
865 QLineEdit* aLabel = aWorkshop->objectBrowser()->activeDocLabel();
866 QPalette aPalet = aLabel->palette();
868 SessionPtr aMgr = ModelAPI_Session::get();
869 DocumentPtr aActiveDoc = aMgr->activeDocument();
870 #ifdef ModuleDataModel
871 QModelIndex aOldIndex = myDataModel->activePartTree();
872 DocumentPtr aDoc = aMgr->moduleDocument();
873 if (aActiveDoc == aDoc) {
874 if (aOldIndex.isValid())
875 aTreeView->setExpanded(aOldIndex, false);
876 myDataModel->deactivatePart();
877 aPalet.setColor(QPalette::Text, QColor(0, 72, 140));
879 std::string aGrpName = ModelAPI_ResultPart::group();
880 for (int i = 0; i < aDoc->size(aGrpName); i++) {
881 ResultPartPtr aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aDoc->object(aGrpName, i));
882 if (aPart->partDoc() == aActiveDoc) {
883 QModelIndex aIndex = myDataModel->partIndex(aPart);
884 if (myDataModel->activatePart(aIndex)) {
885 if (aOldIndex.isValid())
886 aTreeView->setExpanded(aOldIndex, false);
887 aTreeView->setExpanded(myDataModel->activePartTree(), true);
888 aPalet.setColor(QPalette::Text, Qt::black);
895 // Problem with MPV: At first time on creation it doesn't work because Part feature
896 // creation event will be sent after
897 if (aActivePartIndex.isValid())
898 aTreeView->setExpanded(aActivePartIndex, false);
899 XGUI_DataModel* aDataModel = aWorkshop->objectBrowser()->dataModel();
900 aActivePartIndex = aDataModel->documentRootIndex(aActiveDoc);
901 if (aActivePartIndex.isValid())
902 aTreeView->setExpanded(aActivePartIndex, true);
904 aLabel->setPalette(aPalet);
905 aWorkshop->updateCommandStatus();
907 // Update displayed objects in order to update active color
908 XGUI_Displayer* aDisplayer = aWorkshop->displayer();
909 QObjectPtrList aObjects = aDisplayer->displayedObjects();
910 foreach(ObjectPtr aObj, aObjects)
911 aDisplayer->redisplay(aObj, false);
912 aDisplayer->updateViewer();
916 void PartSet_Module::onTreeViewDoubleClick(const QModelIndex& theIndex)
918 if (myWorkshop->currentOperation()) // Do not change activation of parts if an operation active
920 SessionPtr aMgr = ModelAPI_Session::get();
921 if (!theIndex.isValid()) {
922 aMgr->setActiveDocument(aMgr->moduleDocument());
925 if (theIndex.column() != 0) // Use only first column
927 ObjectPtr aObj = myDataModel->object(theIndex);
928 ResultPartPtr aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aObj);
929 if (!aPart.get()) { // Probably this is Feature
930 FeaturePtr aPartFeature = std::dynamic_pointer_cast<ModelAPI_Feature>(aObj);
931 if (aPartFeature.get() && (aPartFeature->getKind() == PartSetPlugin_Part::ID())) {
932 aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aPartFeature->firstResult());
935 if (aPart.get()) { // if this is a part
936 if (aPart->partDoc() == aMgr->activeDocument()) {
937 aMgr->setActiveDocument(aMgr->moduleDocument());
945 void PartSet_Module::onViewCreated(ModuleBase_IViewWindow*)
947 // z layer is created for all started operations in order to visualize operation AIS presentation
949 Handle(V3d_Viewer) aViewer = myWorkshop->viewer()->AISContext()->CurrentViewer();
950 if (myVisualLayerId == 0) {
951 if (myVisualLayerId == 0)
952 aViewer->AddZLayer(myVisualLayerId);
954 TColStd_SequenceOfInteger aZList;
955 aViewer->GetAllZLayers(aZList);
957 for (int i = 1; i <= aZList.Length(); i++) {
958 if (aZList(i) == myVisualLayerId) {
964 aViewer->AddZLayer(myVisualLayerId);