src/PartSet/PartSet_Module.cpp

   1 // Copyright (C) 2014-20xx CEA/DEN, EDF R&D
   2
   3 #include "PartSet_Module.h"
   4 #include "PartSet_WidgetSketchLabel.h"
   5 #include "PartSet_Validators.h"
   6 #include "PartSet_Tools.h"
   7 #include "PartSet_WidgetPoint2d.h"
   8 #include "PartSet_WidgetPoint2dDistance.h"
   9 #include "PartSet_WidgetPoint2DFlyout.h"
  10 #include "PartSet_WidgetShapeSelector.h"
  11 #include "PartSet_WidgetMultiSelector.h"
  12 #include "PartSet_WidgetEditor.h"
  13 #include "PartSet_WidgetFileSelector.h"
  14 #include "PartSet_WidgetSketchCreator.h"
  15 #include "PartSet_SketcherMgr.h"
  16 #include "PartSet_SketcherReetntrantMgr.h"
  17 #include "PartSet_MenuMgr.h"
  18 #include "PartSet_CustomPrs.h"
  19 #include "PartSet_IconFactory.h"
  20 #include "PartSet_WidgetChoice.h"
  21
  22 #include "PartSet_Filters.h"
  23 #include "PartSet_FilterInfinite.h"
  24
  25 #include <PartSetPlugin_Remove.h>
  26 #include <PartSetPlugin_Part.h>
  27 #include <PartSetPlugin_Duplicate.h>
  28
  29 #include <ModuleBase_Operation.h>
  30 #include <ModuleBase_OperationAction.h>
  31 #include <ModuleBase_IViewer.h>
  32 #include <ModuleBase_IViewWindow.h>
  33 #include <ModuleBase_IPropertyPanel.h>
  34 #include <ModuleBase_WidgetEditor.h>
  35 #include <ModuleBase_WidgetValidated.h>
  36 #include <ModuleBase_FilterFactory.h>
  37 #include <ModuleBase_Tools.h>
  38 #include <ModuleBase_OperationFeature.h>
  39
  40 #include <ModelAPI_Object.h>
  41 #include <ModelAPI_Events.h>
  42 #include <ModelAPI_Validator.h>
  43 #include <ModelAPI_Data.h>
  44 #include <ModelAPI_Session.h>
  45 #include <ModelAPI_ResultBody.h>
  46 #include <ModelAPI_AttributeString.h>
  47
  48 #include <GeomDataAPI_Point2D.h>
  49 #include <GeomDataAPI_Point.h>
  50 #include <GeomDataAPI_Dir.h>
  51
  52 #include <XGUI_Displayer.h>
  53 #include <XGUI_Workshop.h>
  54 #include <XGUI_OperationMgr.h>
  55 #include <XGUI_PropertyPanel.h>
  56 #include <XGUI_ModuleConnector.h>
  57 #include <XGUI_ContextMenuMgr.h>
  58 #include <XGUI_Tools.h>
  59 #include <XGUI_ObjectsBrowser.h>
  60 #include <XGUI_SelectionMgr.h>
  61 #include <XGUI_DataModel.h>
  62 #include <XGUI_ErrorMgr.h>
  63
  64 #include <SketchPlugin_Feature.h>
  65 #include <SketchPlugin_Sketch.h>
  66 #include <SketchPlugin_ConstraintAngle.h>
  67 #include <SketchPlugin_ConstraintLength.h>
  68 #include <SketchPlugin_ConstraintDistance.h>
  69 #include <SketchPlugin_ConstraintParallel.h>
  70 #include <SketchPlugin_ConstraintPerpendicular.h>
  71 #include <SketchPlugin_ConstraintRadius.h>
  72
  73 #include <SketcherPrs_SymbolPrs.h>
  74 #include <SketcherPrs_Tools.h>
  75
  76 #include <Events_Loop.h>
  77 #include <Config_PropManager.h>
  78 #include <Config_Keywords.h>
  79
  80 #include <StdSelect_TypeOfFace.hxx>
  81 #include <TopoDS_Vertex.hxx>
  82 #include <TopoDS.hxx>
  83 #include <TopoDS_Shape.hxx>
  84 #include <BRep_Tool.hxx>
  85 #include <AIS_Dimension.hxx>
  86
  87 #include <QObject>
  88 #include <QMouseEvent>
  89 #include <QString>
  90 #include <QTimer>
  91 #include <QApplication>
  92 #include <QMessageBox>
  93 #include <QMainWindow>
  94 #include <QLineEdit>
  95
  96 #include <GeomAlgoAPI_FaceBuilder.h>
  97 #include <GeomDataAPI_Dir.h>
  98
  99 #include <SelectMgr_ListIteratorOfListOfFilter.hxx>
 100
 101 #ifdef _DEBUG
 102 #include <QDebug>
 103 #endif
 104
 105 /*!Create and return new instance of XGUI_Module*/
 106 extern "C" PARTSET_EXPORT ModuleBase_IModule* createModule(ModuleBase_IWorkshop* theWshop)
 107 {
 108   return new PartSet_Module(theWshop);
 109 }
 110
 111 PartSet_Module::PartSet_Module(ModuleBase_IWorkshop* theWshop)
 112 : ModuleBase_IModule(theWshop),
 113   myVisualLayerId(0), myHasConstraintShown(true)
 114 {
 115   new PartSet_IconFactory();
 116
 117   mySketchMgr = new PartSet_SketcherMgr(this);
 118   mySketchReentrantMgr = new PartSet_SketcherReetntrantMgr(theWshop);
 119
 120   XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(theWshop);
 121   XGUI_Workshop* aWorkshop = aConnector->workshop();
 122
 123   XGUI_OperationMgr* anOpMgr = aWorkshop->operationMgr();
 124   connect(anOpMgr, SIGNAL(operationActivatedByPreselection()),
 125           this, SLOT(onOperationActivatedByPreselection()));
 126
 127   ModuleBase_IViewer* aViewer = theWshop->viewer();
 128   connect(aViewer, SIGNAL(keyRelease(ModuleBase_IViewWindow*, QKeyEvent*)),
 129           this, SLOT(onKeyRelease(ModuleBase_IViewWindow*, QKeyEvent*)));
 130   connect(aViewer, SIGNAL(viewTransformed(int)),
 131           SLOT(onViewTransformed(int)));
 132   connect(aViewer, SIGNAL(viewCreated(ModuleBase_IViewWindow*)),
 133           SLOT(onViewCreated(ModuleBase_IViewWindow*)));
 134
 135   myMenuMgr = new PartSet_MenuMgr(this);
 136   myCustomPrs = new PartSet_CustomPrs(theWshop);
 137
 138   Events_Loop* aLoop = Events_Loop::loop();
 139   aLoop->registerListener(this, Events_Loop::eventByName(EVENT_DOCUMENT_CHANGED));
 140
 141   mySelectionFilters.Append(new PartSet_GlobalFilter(myWorkshop));
 142   mySelectionFilters.Append(new PartSet_FilterInfinite(myWorkshop));
 143 }
 144
 145 PartSet_Module::~PartSet_Module()
 146 {
 147   SelectMgr_ListIteratorOfListOfFilter aIt(mySelectionFilters);
 148   for (; aIt.More(); aIt.Next()) {
 149     Handle(SelectMgr_Filter) aFilter = aIt.Value();
 150     if (!aFilter.IsNull())
 151       aFilter.Nullify();
 152   }
 153   delete myCustomPrs;
 154 }
 155
 156 void PartSet_Module::activateSelectionFilters()
 157 {
 158   SelectMgr_ListIteratorOfListOfFilter aIt(mySelectionFilters);
 159   for (; aIt.More(); aIt.Next()) {
 160     Handle(SelectMgr_Filter) aFilter = aIt.Value();
 161     if (!aFilter.IsNull())
 162       myWorkshop->viewer()->addSelectionFilter(aFilter);
 163   }
 164 }
 165
 166 void PartSet_Module::deactivateSelectionFilters()
 167 {
 168   SelectMgr_ListIteratorOfListOfFilter aIt(mySelectionFilters);
 169   for (; aIt.More(); aIt.Next()) {
 170     Handle(SelectMgr_Filter) aFilter = aIt.Value();
 171     if (!aFilter.IsNull())
 172       myWorkshop->viewer()->removeSelectionFilter(aFilter);
 173   }
 174 }
 175
 176 void PartSet_Module::registerValidators()
 177 {
 178   //Registering of validators
 179   SessionPtr aMgr = ModelAPI_Session::get();
 180   ModelAPI_ValidatorsFactory* aFactory = aMgr->validators();
 181   aFactory->registerValidator("PartSet_DistanceSelection", new PartSet_DistanceSelection);
 182   aFactory->registerValidator("PartSet_LengthSelection", new PartSet_LengthSelection);
 183   aFactory->registerValidator("PartSet_PerpendicularSelection", new PartSet_PerpendicularSelection);
 184   aFactory->registerValidator("PartSet_ParallelSelection", new PartSet_ParallelSelection);
 185   aFactory->registerValidator("PartSet_RadiusSelection", new PartSet_RadiusSelection);
 186   aFactory->registerValidator("PartSet_RigidSelection", new PartSet_RigidSelection);
 187   aFactory->registerValidator("PartSet_CoincidentSelection", new PartSet_CoincidentSelection);
 188   aFactory->registerValidator("PartSet_HVDirSelection", new PartSet_HVDirSelection);
 189   aFactory->registerValidator("PartSet_TangentSelection", new PartSet_TangentSelection);
 190   aFactory->registerValidator("PartSet_FilletSelection", new PartSet_FilletSelection);
 191   aFactory->registerValidator("PartSet_AngleSelection", new PartSet_AngleSelection);
 192   aFactory->registerValidator("PartSet_EqualSelection", new PartSet_EqualSelection);
 193   aFactory->registerValidator("PartSet_DifferentObjects", new PartSet_DifferentObjectsValidator);
 194   aFactory->registerValidator("PartSet_CoincidentAttr", new PartSet_CoincidentAttr);
 195   aFactory->registerValidator("PartSet_SketchEntityValidator", new PartSet_SketchEntityValidator);
 196 }
 197
 198 void PartSet_Module::registerFilters()
 199 {
 200   //Registering of selection filters
 201   XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
 202   ModuleBase_FilterFactory* aFactory = aConnector->selectionFilters();
 203 }
 204
 205 void PartSet_Module::registerProperties()
 206 {
 207   Config_PropManager::registerProp("Sketch planes", "planes_size", "Size", Config_Prop::Double,
 208                                    PLANE_SIZE);
 209   Config_PropManager::registerProp("Sketch planes", "planes_thickness", "Thickness",
 210                                    Config_Prop::Integer, SKETCH_WIDTH);
 211   Config_PropManager::registerProp("Sketch planes", "rotate_to_plane", "Rotate to plane when selected",
 212     Config_Prop::Boolean, "false");
 213 }
 214
 215 void PartSet_Module::connectToPropertyPanel(ModuleBase_ModelWidget* theWidget, const bool isToConnect)
 216 {
 217   mySketchMgr->connectToPropertyPanel(theWidget, isToConnect);
 218 }
 219
 220 void PartSet_Module::operationCommitted(ModuleBase_Operation* theOperation)
 221 {
 222   if (PartSet_SketcherMgr::isNestedSketchOperation(theOperation)) {
 223     mySketchMgr->commitNestedSketch(theOperation);
 224   }
 225
 226   /// Restart sketcher operations automatically
 227   if (!mySketchReentrantMgr->operationCommitted(theOperation)) {
 228
 229     ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>(theOperation);
 230     if (aFOperation && !aFOperation->isEditOperation()) {
 231       // the selection is cleared after commit the create operation
 232       // in order to do not use the same selected objects in the restarted operation
 233       // for common behaviour, the selection is cleared even if the operation is not restarted
 234       XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
 235       XGUI_Workshop* aWorkshop = aConnector->workshop();
 236       aWorkshop->selector()->clearSelection();
 237     }
 238   }
 239 }
 240
 241 void PartSet_Module::operationAborted(ModuleBase_Operation* theOperation)
 242 {
 243   /// Restart sketcher operations automatically
 244   mySketchReentrantMgr->operationAborted(theOperation);
 245 }
 246
 247 void PartSet_Module::operationStarted(ModuleBase_Operation* theOperation)
 248 {
 249   /// Restart sketcher operations automatically
 250   mySketchReentrantMgr->operationStarted(theOperation);
 251
 252   if (PartSet_SketcherMgr::isSketchOperation(theOperation)) {
 253     mySketchMgr->startSketch(theOperation);
 254   }
 255   else if (PartSet_SketcherMgr::isNestedSketchOperation(theOperation)) {
 256     mySketchMgr->startNestedSketch(theOperation);
 257   }
 258
 259   ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>(theOperation);
 260   if (aFOperation)
 261     myCustomPrs->activate(aFOperation->feature(), true);
 262 }
 263
 264 void PartSet_Module::operationResumed(ModuleBase_Operation* theOperation)
 265 {
 266   ModuleBase_IModule::operationResumed(theOperation);
 267
 268   ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>(theOperation);
 269   if (aFOperation)
 270     myCustomPrs->activate(aFOperation->feature(), true);
 271 }
 272
 273 void PartSet_Module::operationStopped(ModuleBase_Operation* theOperation)
 274 {
 275   bool isModified = myCustomPrs->deactivate(false);
 276
 277   if (PartSet_SketcherMgr::isNestedSketchOperation(theOperation)) {
 278     mySketchMgr->stopNestedSketch(theOperation);
 279   }
 280
 281   //VSV: Viewer is updated on feature update and redisplay
 282   if (isModified) {
 283     XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(myWorkshop);
 284     XGUI_Displayer* aDisplayer = aConnector->workshop()->displayer();
 285     aDisplayer->updateViewer();
 286   }
 287   mySketchMgr->onShowConstraintsToggle(myHasConstraintShown);
 288 }
 289
 290 ModuleBase_Operation* PartSet_Module::currentOperation() const
 291 {
 292   XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
 293   XGUI_OperationMgr* anOpMgr = aConnector->workshop()->operationMgr();
 294   return anOpMgr->currentOperation();
 295 }
 296
 297 bool PartSet_Module::canUndo() const
 298 {
 299   bool aCanUndo = false;
 300   SessionPtr aMgr = ModelAPI_Session::get();
 301   if (aMgr->hasModuleDocument() && aMgr->canUndo()) {
 302     aCanUndo = !aMgr->isOperation();
 303     if (!aCanUndo) // check the enable state additionally by sketch manager
 304       aCanUndo = aMgr->canUndo();
 305   }
 306   return aCanUndo;
 307 }
 308
 309 bool PartSet_Module::canRedo() const
 310 {
 311   bool aCanRedo = false;
 312   SessionPtr aMgr = ModelAPI_Session::get();
 313   if (aMgr->hasModuleDocument() && aMgr->canRedo()) {
 314     aCanRedo = !aMgr->isOperation();
 315     if (!aCanRedo) // check the enable state additionally by sketch manager
 316       aCanRedo = aMgr->canRedo();
 317   }
 318   return aCanRedo;
 319 }
 320
 321 bool PartSet_Module::canApplyAction(const ObjectPtr& theObject, const QString& theActionId) const
 322 {
 323   bool aValid = true;
 324   if (theActionId == "MOVE_CMD") {
 325     FeaturePtr aFeature = ModelAPI_Feature::feature(theObject);
 326     if (aFeature) {
 327       // part features can not be moved in the history.
 328       if (aFeature->getKind() == PartSetPlugin_Part::ID())
 329         aValid = false;
 330     }
 331   }
 332   return aValid;
 333 }
 334
 335 bool PartSet_Module::canEraseObject(const ObjectPtr& theObject) const
 336 {
 337   // the sketch manager put the restriction to the objects erase
 338   return mySketchMgr->canEraseObject(theObject);
 339 }
 340
 341 bool PartSet_Module::canDisplayObject(const ObjectPtr& theObject) const
 342 {
 343   // the sketch manager put the restriction to the objects display
 344   return mySketchMgr->canDisplayObject(theObject);
 345 }
 346
 347 bool PartSet_Module::canActivateSelection(const ObjectPtr& theObject) const
 348 {
 349   bool aCanActivate = ModuleBase_IModule::canActivateSelection(theObject);
 350
 351   ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
 352   bool isSketchOp = PartSet_SketcherMgr::isSketchOperation(anOperation),
 353        isNestedOp = PartSet_SketcherMgr::isNestedSketchOperation(anOperation);
 354   if (isSketchOp || isNestedOp) {
 355     // in active sketch operation it is possible to activate operation object in selection
 356     // in the edit operation, e.g. points of the line can be moved when the line is edited
 357     ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>(anOperation);
 358     aCanActivate = aCanActivate || (aFOperation && aFOperation->isEditOperation());
 359   }
 360   return aCanActivate;
 361 }
 362
 363 bool PartSet_Module::addViewerMenu(QMenu* theMenu, const QMap<QString, QAction*>& theStdActions) const
 364 {
 365   return myMenuMgr->addViewerMenu(theMenu, theStdActions);
 366 }
 367
 368 void PartSet_Module::updateViewerMenu(const QMap<QString, QAction*>& theStdActions)
 369 {
 370   myMenuMgr->updateViewerMenu(theStdActions);
 371 }
 372
 373 QString PartSet_Module::getFeatureError(const FeaturePtr& theFeature)
 374 {
 375   QString anError = ModuleBase_IModule::getFeatureError(theFeature);
 376   if (anError.isEmpty())
 377     anError = sketchMgr()->getFeatureError(theFeature);
 378
 379   return anError;
 380 }
 381
 382 void PartSet_Module::grantedOperationIds(ModuleBase_Operation* theOperation,
 383                                          QStringList& theIds) const
 384 {
 385   myMenuMgr->grantedOperationIds(theOperation, theIds);
 386
 387   if (PartSet_SketcherMgr::isSketchOperation(theOperation)) {
 388     XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
 389     XGUI_Workshop* aWorkshop = aConnector->workshop();
 390
 391     theIds.append(aWorkshop->contextMenuMgr()->action("DELETE_CMD")->text());
 392   }
 393 }
 394
 395 void PartSet_Module::activeSelectionModes(QIntList& theModes)
 396 {
 397   theModes.clear();
 398   if (mySketchMgr->activeSketch().get())
 399     PartSet_SketcherMgr::sketchSelectionModes(theModes);
 400 }
 401
 402 bool PartSet_Module::isMouseOverWindow()
 403 {
 404   return mySketchMgr->isMouseOverWindow();
 405 }
 406
 407 void PartSet_Module::closeDocument()
 408 {
 409   clearViewer();
 410 }
 411
 412 void PartSet_Module::clearViewer()
 413 {
 414   myCustomPrs->clearPrs();
 415
 416   XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(myWorkshop);
 417   XGUI_Workshop* aWorkshop = aConnector->workshop();
 418   XGUI_Displayer* aDisplayer = aWorkshop->displayer();
 419   aDisplayer->deactivateSelectionFilters();
 420 }
 421
 422 void PartSet_Module::propertyPanelDefined(ModuleBase_Operation* theOperation)
 423 {
 424   ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>(theOperation);
 425   if (!aFOperation)
 426     return;
 427
 428   ModuleBase_IPropertyPanel* aPanel = aFOperation->propertyPanel();
 429   // we have to manually activate the sketch label in edit mode
 430   if (PartSet_SketcherMgr::isSketchOperation(aFOperation) &&  (aFOperation->isEditOperation()))
 431     aPanel->activateWidget(aPanel->modelWidgets().first());
 432 }
 433
 434
 435 void PartSet_Module::onSelectionChanged()
 436 {
 437   ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
 438   if (!aOperation)
 439     return;
 440
 441   bool isSketcherOp = false;
 442   // An edit operation is enable only if the current opeation is the sketch operation
 443   if (mySketchMgr->activeSketch()) {
 444     if (PartSet_Tools::sketchPlane(mySketchMgr->activeSketch()))
 445       isSketcherOp = PartSet_SketcherMgr::isSketchOperation(aOperation);
 446   }
 447   if (isSketcherOp) {
 448     // Editing of constraints can be done on selection
 449     ModuleBase_ISelection* aSelect = myWorkshop->selection();
 450     QList<ModuleBase_ViewerPrs> aSelected = aSelect->getSelected();
 451     if (aSelected.size() == 1) {
 452       ModuleBase_ViewerPrs aPrs = aSelected.first();
 453       ObjectPtr aObject = aPrs.object();
 454       FeaturePtr aFeature = ModelAPI_Feature::feature(aObject);
 455       if (aFeature) {
 456         std::string aId = aFeature->getKind();
 457         if ((aId == SketchPlugin_ConstraintRadius::ID()) ||
 458             (aId == SketchPlugin_ConstraintLength::ID()) ||
 459             (aId == SketchPlugin_ConstraintDistance::ID()) ||
 460             (aId == SketchPlugin_ConstraintAngle::ID())) {
 461           editFeature(aFeature);
 462         }
 463       }
 464     }
 465   }
 466 }
 467
 468 void PartSet_Module::onKeyRelease(ModuleBase_IViewWindow* theWnd, QKeyEvent* theEvent)
 469 {
 470   XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
 471   XGUI_OperationMgr* anOpMgr = aConnector->workshop()->operationMgr();
 472   anOpMgr->onKeyReleased(theEvent);
 473 }
 474
 475 void PartSet_Module::onOperationActivatedByPreselection()
 476 {
 477   if (!mySketchReentrantMgr->canBeCommittedByPreselection())
 478     return;
 479   mySketchMgr->operationActivatedByPreselection();
 480 }
 481
 482 ModuleBase_ModelWidget* PartSet_Module::createWidgetByType(const std::string& theType, QWidget* theParent,
 483                                             Config_WidgetAPI* theWidgetApi, std::string theParentId)
 484 {
 485   ModuleBase_IWorkshop* aWorkshop = workshop();
 486   XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(aWorkshop);
 487   XGUI_Workshop* aXUIWorkshop = aConnector->workshop();
 488   ModuleBase_ModelWidget* aWgt = NULL;
 489   if (theType == "sketch-start-label") {
 490     PartSet_WidgetSketchLabel* aLabelWgt = new PartSet_WidgetSketchLabel(theParent, aWorkshop,
 491       theWidgetApi, theParentId, mySketchMgr->isConstraintsShown());
 492     connect(aLabelWgt, SIGNAL(planeSelected(const std::shared_ptr<GeomAPI_Pln>&)),
 493       mySketchMgr, SLOT(onPlaneSelected(const std::shared_ptr<GeomAPI_Pln>&)));
 494     connect(aLabelWgt, SIGNAL(showConstraintToggled(bool)),
 495       mySketchMgr, SLOT(onShowConstraintsToggle(bool)));
 496     aWgt = aLabelWgt;
 497   } else if (theType == "sketch-2dpoint_selector") {
 498     PartSet_WidgetPoint2D* aPointWgt = new PartSet_WidgetPoint2D(theParent, aWorkshop,
 499                                                                  theWidgetApi, theParentId);
 500     aPointWgt->setSketch(mySketchMgr->activeSketch());
 501     connect(aPointWgt, SIGNAL(vertexSelected()), sketchReentranceMgr(), SLOT(onVertexSelected()));
 502     aWgt = aPointWgt;
 503   }else if (theType == "sketch-2dpoint_flyout_selector") {
 504     PartSet_WidgetPoint2DFlyout* aPointWgt = new PartSet_WidgetPoint2DFlyout(theParent, aWorkshop,
 505                                                                  theWidgetApi, theParentId);
 506     aPointWgt->setSketch(mySketchMgr->activeSketch());
 507     connect(aPointWgt, SIGNAL(vertexSelected()), sketchReentranceMgr(), SLOT(onVertexSelected()));
 508     aWgt = aPointWgt;
 509   } else if (theType == "point2ddistance") {
 510     PartSet_WidgetPoint2dDistance* aDistanceWgt = new PartSet_WidgetPoint2dDistance(theParent,
 511                                                         aWorkshop, theWidgetApi, theParentId);
 512     aDistanceWgt->setSketch(mySketchMgr->activeSketch());
 513     aWgt = aDistanceWgt;
 514   } else if (theType == "sketch_shape_selector") {
 515     PartSet_WidgetShapeSelector* aShapeSelectorWgt =
 516       new PartSet_WidgetShapeSelector(theParent, aWorkshop, theWidgetApi, theParentId);
 517     aShapeSelectorWgt->setSketcher(mySketchMgr->activeSketch());
 518     aWgt = aShapeSelectorWgt;
 519   } else if (theType == "sketch_multi_selector") {
 520     PartSet_WidgetMultiSelector* aShapeSelectorWgt =
 521       new PartSet_WidgetMultiSelector(theParent, aWorkshop, theWidgetApi, theParentId);
 522     aShapeSelectorWgt->setSketcher(mySketchMgr->activeSketch());
 523     aWgt = aShapeSelectorWgt;
 524   } else if (theType == WDG_DOUBLEVALUE_EDITOR) {
 525     aWgt = new PartSet_WidgetEditor(theParent, aWorkshop, theWidgetApi, theParentId);
 526   } else if (theType == "export_file_selector") {
 527     aWgt = new PartSet_WidgetFileSelector(theParent, aWorkshop, theWidgetApi, theParentId);
 528   } else if (theType == "sketch_launcher") {
 529     aWgt = new PartSet_WidgetSketchCreator(theParent, this, theWidgetApi, theParentId);
 530   } else if (theType == "module_choice") {
 531     aWgt = new PartSet_WidgetChoice(theParent, theWidgetApi, theParentId);
 532     connect(aWgt, SIGNAL(itemSelected(int)), SLOT(onBooleanOperationChange(int)));
 533   }
 534   return aWgt;
 535 }
 536
 537 ModuleBase_ModelWidget* PartSet_Module::activeWidget() const
 538 {
 539   ModuleBase_ModelWidget* anActiveWidget = 0;
 540
 541   anActiveWidget = mySketchReentrantMgr->internalActiveWidget();
 542   if (!anActiveWidget) {
 543     ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
 544     if (aOperation) {
 545       ModuleBase_IPropertyPanel* aPanel = aOperation->propertyPanel();
 546       anActiveWidget = aPanel->activeWidget();
 547     }
 548   }
 549   return anActiveWidget;
 550 }
 551
 552 bool PartSet_Module::deleteObjects()
 553 {
 554   bool isProcessed = false;
 555
 556   XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
 557   XGUI_Workshop* aWorkshop = aConnector->workshop();
 558   XGUI_OperationMgr* anOpMgr = aWorkshop->operationMgr();
 559
 560   //SessionPtr aMgr = ModelAPI_Session::get();
 561   // 1. check whether the delete should be processed in the module
 562   ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
 563   bool isSketchOp = PartSet_SketcherMgr::isSketchOperation(anOperation),
 564        isNestedOp = PartSet_SketcherMgr::isNestedSketchOperation(anOperation);
 565   if (isSketchOp || isNestedOp) {
 566     isProcessed = true;
 567     // 2. find selected presentations
 568     // selected objects should be collected before the current operation abort because
 569     // the abort leads to selection lost on constraint objects. It can be corrected after #386 issue
 570     ModuleBase_ISelection* aSel = workshop()->selection();
 571     QObjectPtrList aSelectedObj = aSel->selectedPresentations();
 572     // if there are no selected objects in the viewer, that means that the selection in another
 573     // place cased this method. It is necessary to return the false value to understande in above
 574     // method that delete is not processed
 575     if (aSelectedObj.count() == 0)
 576       return false;
 577
 578     // avoid delete of the objects, which are not belong to the current sketch
 579     // in order to do not delete results of other sketches
 580     QObjectPtrList aSketchObjects;
 581     QObjectPtrList::const_iterator anIt = aSelectedObj.begin(), aLast = aSelectedObj.end();
 582     for ( ; anIt != aLast; anIt++) {
 583       ObjectPtr anObject = *anIt;
 584       if (mySketchMgr->isObjectOfSketch(anObject)) {
 585         // sketch feature should be used in this list because workshop deletes features only
 586         // results are skipped
 587         FeaturePtr aSketchFeature = ModelAPI_Feature::feature(anObject);
 588         aSketchObjects.append(aSketchFeature);
 589       }
 590     }
 591     // if the selection contains only local selected presentations from other sketches,
 592     // the Delete operation should not be done at all
 593     if (aSketchObjects.size() == 0)
 594       return true;
 595
 596     // 3. start operation
 597     QString aDescription = aWorkshop->contextMenuMgr()->action("DELETE_CMD")->text();
 598     ModuleBase_OperationAction* anOpAction = new ModuleBase_OperationAction(aDescription, this);
 599
 600     // the active nested sketch operation should be aborted unconditionally
 601     // the Delete action should be additionally granted for the Sketch operation
 602     // in order to do not abort/commit it
 603     if (!anOpMgr->canStartOperation(anOpAction->id()))
 604       return true; // the objects are processed but can not be deleted
 605
 606     anOpMgr->startOperation(anOpAction);
 607
 608     // 4. delete features
 609     // sketch feature should be skipped, only sub-features can be removed
 610     // when sketch operation is active
 611     aWorkshop->deleteFeatures(aSketchObjects);
 612     // 5. stop operation
 613     anOpMgr->commitOperation();
 614   }
 615   return isProcessed;
 616 }
 617
 618 void PartSet_Module::onFeatureTriggered()
 619 {
 620   QAction* aCmd = dynamic_cast<QAction*>(sender());
 621   if (aCmd->isCheckable() && aCmd->isChecked()) {
 622     // 1. check whether the delete should be processed in the module
 623     ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
 624     bool isNestedOp = PartSet_SketcherMgr::isNestedCreateOperation(anOperation);
 625     if (isNestedOp) {
 626       // in case if in the viewer nothing is displayed, the create operation should not be
 627       // comitted even if all values of the feature are initialized
 628       if (!mySketchMgr->canDisplayCurrentCreatedFeature()) {
 629         // the action information should be saved before the operation is aborted
 630         // because this abort leads to update command status, which unchecks this action
 631         anOperation->abort();
 632         launchOperation(aCmd->data().toString());
 633       }
 634     }
 635   }
 636   ModuleBase_IModule::onFeatureTriggered();
 637 }
 638
 639 void PartSet_Module::launchOperation(const QString& theCmdId)
 640 {
 641   if (myWorkshop->currentOperation() &&
 642       myWorkshop->currentOperation()->id().toStdString() == SketchPlugin_Sketch::ID())
 643     myHasConstraintShown = mySketchMgr->isConstraintsShown();
 644   if (PartSet_SketcherMgr::constraintsIdList().contains(theCmdId)) {
 645     // Show constraints if a constraint was anOperation
 646     mySketchMgr->onShowConstraintsToggle(true);
 647   }
 648   ModuleBase_IModule::launchOperation(theCmdId);
 649 }
 650
 651
 652 void PartSet_Module::onObjectDisplayed(ObjectPtr theObject, AISObjectPtr theAIS)
 653 {
 654   Handle(AIS_InteractiveObject) anAIS = theAIS->impl<Handle(AIS_InteractiveObject)>();
 655   if (!anAIS.IsNull()) {
 656     Handle(AIS_InteractiveContext) aCtx = anAIS->GetContext();
 657     Handle(AIS_Dimension) aDim = Handle(AIS_Dimension)::DownCast(anAIS);
 658     if (!aDim.IsNull()) {
 659       aCtx->SetZLayer(aDim, myVisualLayerId);
 660     } else {
 661       Handle(SketcherPrs_SymbolPrs) aCons = Handle(SketcherPrs_SymbolPrs)::DownCast(anAIS);
 662       if (!aCons.IsNull())
 663         aCtx->SetZLayer(aCons, myVisualLayerId);
 664     }
 665   }
 666 }
 667
 668 void PartSet_Module::onBeforeObjectErase(ObjectPtr theObject, AISObjectPtr theAIS)
 669 {
 670   // this is obsolete
 671   // it should be recomputed in order to disappear in the viewer if the corresponded object
 672   // is erased
 673   //if (myCustomPrs->isActive())
 674   //  myCustomPrs->redisplay(theObject, false);
 675 }
 676
 677 void PartSet_Module::onViewTransformed(int theTrsfType)
 678 {
 679   // Set length of arrows constant in pixel size
 680   // if the operation is panning or rotate or panglobal then do nothing
 681   if ((theTrsfType == 1) || (theTrsfType == 3) || (theTrsfType == 4))
 682     return;
 683   ModuleBase_IViewer* aViewer = myWorkshop->viewer();
 684   Handle(AIS_InteractiveContext) aContext = aViewer->AISContext();
 685   if (aContext.IsNull())
 686     return;
 687
 688   //Handle(V3d_View) aView = aViewer->activeView();
 689
 690   XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(myWorkshop);
 691   XGUI_Workshop* aWorkshop = aConnector->workshop();
 692   XGUI_Displayer* aDisplayer = aWorkshop->displayer();
 693   Handle(V3d_Viewer) aV3dViewer = aContext->CurrentViewer();
 694   Handle(V3d_View) aView;
 695   double aScale = 0;
 696   for (aV3dViewer->InitDefinedViews();
 697        aV3dViewer->MoreDefinedViews();
 698        aV3dViewer->NextDefinedViews()) {
 699     Handle(V3d_View) aV = aV3dViewer->DefinedView();
 700     double aS = aV->Scale();
 701     if (aS > aScale) {
 702       aScale = aS;
 703       aView = aV;
 704     }
 705   }
 706   if (aView.IsNull())
 707     return;
 708   double aLen = aView->Convert(20);
 709
 710   double aPrevLen = SketcherPrs_Tools::getArrowSize();
 711   SketcherPrs_Tools::setArrowSize(aLen);
 712   const double aPrevScale = aViewer->Scale(aViewer->activeView());
 713   const double aCurScale = aViewer->activeView()->Camera()->Scale();
 714   aViewer->SetScale(aViewer->activeView(), aCurScale);
 715   SketcherPrs_Tools::setTextHeight (aCurScale / aPrevScale * SketcherPrs_Tools::getTextHeight());
 716   bool isModified = false;
 717   QList<AISObjectPtr> aPrsList = aDisplayer->displayedPresentations();
 718   foreach (AISObjectPtr aAIS, aPrsList) {
 719     Handle(AIS_InteractiveObject) aAisObj = aAIS->impl<Handle(AIS_InteractiveObject)>();
 720
 721     Handle(AIS_Dimension) aDim = Handle(AIS_Dimension)::DownCast(aAisObj);
 722     if (!aDim.IsNull()) {
 723       aDim->DimensionAspect()->ArrowAspect()->SetLength(aLen);
 724       aContext->Redisplay(aDim, false);
 725       isModified = true;
 726     }
 727   }
 728   if (isModified)
 729     aDisplayer->updateViewer();
 730 }
 731
 732 bool PartSet_Module::customizeObject(ObjectPtr theObject, const bool theUpdateViewer)
 733 {
 734   bool isRedisplayed = false;
 735   if (myCustomPrs->isActive())
 736     isRedisplayed = myCustomPrs->redisplay(theObject, theUpdateViewer);
 737
 738   return isRedisplayed;
 739 }
 740
 741 void PartSet_Module::customizeObjectBrowser(QWidget* theObjectBrowser)
 742 {
 743   XGUI_ObjectsBrowser* aOB = dynamic_cast<XGUI_ObjectsBrowser*>(theObjectBrowser);
 744   if (aOB) {
 745     QLabel* aLabel = aOB->activeDocLabel();
 746     aLabel->installEventFilter(myMenuMgr);
 747     connect(aLabel, SIGNAL(customContextMenuRequested(const QPoint&)),
 748           SLOT(onActiveDocPopup(const QPoint&)));
 749     //QPalette aPalet = aLabel->palette();
 750     //aPalet.setColor(QPalette::Text, QColor(0, 72, 140));
 751     //aLabel->setPalette(aPalet);
 752     aOB->treeView()->setExpandsOnDoubleClick(false);
 753     connect(aOB->treeView(), SIGNAL(doubleClicked(const QModelIndex&)),
 754       SLOT(onTreeViewDoubleClick(const QModelIndex&)));
 755   }
 756 }
 757
 758 void PartSet_Module::onActiveDocPopup(const QPoint& thePnt)
 759 {
 760   SessionPtr aMgr = ModelAPI_Session::get();
 761   QAction* aActivatePartAction = myMenuMgr->action("ACTIVATE_PARTSET_CMD");
 762
 763   XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(myWorkshop);
 764   XGUI_Workshop* aWorkshop = aConnector->workshop();
 765   QLabel* aHeader = aWorkshop->objectBrowser()->activeDocLabel();
 766
 767   aActivatePartAction->setEnabled((aMgr->activeDocument() != aMgr->moduleDocument()));
 768
 769   QMenu aMenu;
 770   aMenu.addAction(aActivatePartAction);
 771   aMenu.exec(aHeader->mapToGlobal(thePnt));
 772 }
 773
 774
 775 ObjectPtr PartSet_Module::findPresentedObject(const AISObjectPtr& theAIS) const
 776 {
 777   ObjectPtr anObject;
 778   ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
 779   if (aOperation) {
 780     /// If last line finished on vertex the lines creation sequence has to be break
 781     ModuleBase_IPropertyPanel* aPanel = aOperation->propertyPanel();
 782     ModuleBase_ModelWidget* anActiveWidget = aPanel->activeWidget();
 783     // if there is an active widget, find the presented object in it
 784     if (!anActiveWidget)
 785       anActiveWidget = aPanel->preselectionWidget();
 786
 787     ModuleBase_WidgetValidated* aWidgetValidated = dynamic_cast<ModuleBase_WidgetValidated*>
 788                                                                            (anActiveWidget);
 789     if (aWidgetValidated)
 790       anObject = aWidgetValidated->findPresentedObject(theAIS);
 791   }
 792   return anObject;
 793 }
 794
 795 void PartSet_Module::addObjectBrowserMenu(QMenu* theMenu) const
 796 {
 797   QObjectPtrList aObjects = myWorkshop->selection()->selectedObjects();
 798   int aSelected = aObjects.size();
 799   SessionPtr aMgr = ModelAPI_Session::get();
 800   QAction* aActivatePartAction = myMenuMgr->action("ACTIVATE_PART_CMD");
 801
 802   ModuleBase_Operation* aCurrentOp = myWorkshop->currentOperation();
 803   if (aSelected == 1) {
 804     bool hasResult = false;
 805     bool hasFeature = false;
 806     bool hasParameter = false;
 807     bool hasSubFeature = false;
 808     ModuleBase_Tools::checkObjects(aObjects, hasResult, hasFeature, hasParameter, hasSubFeature);
 809
 810     ObjectPtr aObject = aObjects.first();
 811     if (aObject) {
 812       ResultPartPtr aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aObject);
 813       FeaturePtr aFeature = std::dynamic_pointer_cast<ModelAPI_Feature>(aObject);
 814       bool isPart = aPart.get() ||
 815         (aFeature.get() && (aFeature->getKind() == PartSetPlugin_Part::ID()));
 816       if (isPart) {
 817         DocumentPtr aPartDoc;
 818         if (!aPart.get()) {
 819           aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aFeature->firstResult());
 820         }
 821         if (aPart.get()) // this may be null is Part feature is disabled
 822           aPartDoc = aPart->partDoc();
 823
 824         theMenu->addAction(aActivatePartAction);
 825         aActivatePartAction->setEnabled((aMgr->activeDocument() != aPartDoc));
 826
 827       } else if (aObject->document() == aMgr->activeDocument()) {
 828         if (hasParameter || hasFeature) {
 829           myMenuMgr->action("EDIT_CMD")->setEnabled(true);
 830           theMenu->addAction(myMenuMgr->action("EDIT_CMD"));
 831           if (aCurrentOp && aFeature.get()) {
 832             if (aCurrentOp->id().toStdString() == aFeature->getKind())
 833               myMenuMgr->action("EDIT_CMD")->setEnabled(false);
 834           }
 835         }
 836       }
 837
 838       ResultBodyPtr aResult = std::dynamic_pointer_cast<ModelAPI_ResultBody>(aObject);
 839       if( aResult.get() )
 840         theMenu->addAction(myMenuMgr->action("SELECT_PARENT_CMD"));
 841     }
 842   }
 843   bool aNotDeactivate = (aCurrentOp == 0);
 844   if (!aNotDeactivate) {
 845     aActivatePartAction->setEnabled(false);
 846   }
 847 }
 848
 849 void PartSet_Module::processEvent(const std::shared_ptr<Events_Message>& theMessage)
 850 {
 851   if (theMessage->eventID() == Events_Loop::loop()->eventByName(EVENT_DOCUMENT_CHANGED)) {
 852     // Do not change activation of parts if an operation active
 853     static QStringList aAllowActivationList;
 854     if (aAllowActivationList.isEmpty())
 855       aAllowActivationList <<
 856       QString(PartSetPlugin_Part::ID().c_str()) <<
 857       QString(PartSetPlugin_Duplicate::ID().c_str()) <<
 858       QString(PartSetPlugin_Remove::ID().c_str());
 859     if (myWorkshop->currentOperation() &&
 860       (!aAllowActivationList.contains(myWorkshop->currentOperation()->id())))
 861       return;
 862     XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(myWorkshop);
 863     XGUI_Workshop* aWorkshop = aConnector->workshop();
 864     XGUI_DataTree* aTreeView = aWorkshop->objectBrowser()->treeView();
 865     QLabel* aLabel = aWorkshop->objectBrowser()->activeDocLabel();
 866     QPalette aPalet = aLabel->palette();
 867
 868     SessionPtr aMgr = ModelAPI_Session::get();
 869     DocumentPtr aActiveDoc = aMgr->activeDocument();
 870     if (aActivePartIndex.isValid())
 871       aTreeView->setExpanded(aActivePartIndex, false);
 872     XGUI_DataModel* aDataModel = aWorkshop->objectBrowser()->dataModel();
 873     aActivePartIndex = aDataModel->documentRootIndex(aActiveDoc);
 874     if (aActivePartIndex.isValid())
 875       aTreeView->setExpanded(aActivePartIndex, true);
 876
 877     aLabel->setPalette(aPalet);
 878     aWorkshop->updateCommandStatus();
 879
 880     // Update displayed objects in order to update active color
 881     XGUI_Displayer* aDisplayer = aWorkshop->displayer();
 882     QObjectPtrList aObjects = aDisplayer->displayedObjects();
 883     bool aHidden;
 884     foreach(ObjectPtr aObj, aObjects) {
 885       //TODO: replace by redisplay event.
 886       aHidden = !aObj->data() || !aObj->data()->isValid() ||
 887         aObj->isDisabled() || (!aObj->isDisplayed());
 888       if (!aHidden)
 889         aDisplayer->redisplay(aObj, false);
 890     }
 891     aDisplayer->updateViewer();
 892   }
 893 }
 894
 895 void PartSet_Module::onTreeViewDoubleClick(const QModelIndex& theIndex)
 896 {
 897   if (myWorkshop->currentOperation()) // Do not change activation of parts if an operation active
 898     return;
 899   SessionPtr aMgr = ModelAPI_Session::get();
 900   if (!theIndex.isValid()) {
 901     aMgr->setActiveDocument(aMgr->moduleDocument());
 902     return;
 903   }
 904   if (theIndex.column() != 0) // Use only first column
 905     return;
 906
 907   XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(myWorkshop);
 908   XGUI_Workshop* aWorkshop = aConnector->workshop();
 909   XGUI_DataModel* aDataModel = aWorkshop->objectBrowser()->dataModel();
 910   // De not use non editable Indexes
 911   if ((aDataModel->flags(theIndex) & Qt::ItemIsSelectable) == 0)
 912     return;
 913   ObjectPtr aObj = aDataModel->object(theIndex);
 914
 915   ResultPartPtr aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aObj);
 916   if (!aPart.get()) { // Probably this is Feature
 917     FeaturePtr aPartFeature = std::dynamic_pointer_cast<ModelAPI_Feature>(aObj);
 918     if (aPartFeature.get() && (aPartFeature->getKind() == PartSetPlugin_Part::ID())) {
 919       aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aPartFeature->firstResult());
 920     }
 921   }
 922   if (aPart.get()) { // if this is a part
 923     if (aPart->partDoc() == aMgr->activeDocument()) {
 924       myMenuMgr->activatePartSet();
 925     } else {
 926       aPart->activate();
 927     }
 928   }
 929 }
 930
 931
 932 void PartSet_Module::onViewCreated(ModuleBase_IViewWindow*)
 933 {
 934   // z layer is created for all started operations in order to visualize operation AIS presentation
 935   // over the object
 936   Handle(AIS_InteractiveContext) aContext = myWorkshop->viewer()->AISContext();
 937   if (aContext.IsNull())
 938     return;
 939
 940   Handle(V3d_Viewer) aViewer = aContext->CurrentViewer();
 941   if (myVisualLayerId == 0) {
 942     if (myVisualLayerId == 0)
 943       aViewer->AddZLayer(myVisualLayerId);
 944   } else {
 945     TColStd_SequenceOfInteger aZList;
 946     aViewer->GetAllZLayers(aZList);
 947     bool aFound = false;
 948     for (int i = 1; i <= aZList.Length(); i++) {
 949       if (aZList(i) == myVisualLayerId) {
 950         aFound = true;
 951         break;
 952       }
 953     }
 954     if (!aFound)
 955       aViewer->AddZLayer(myVisualLayerId);
 956   }
 957   // if there is an active operation with validated widget,
 958   // the filters of this widget should be activated in the created view
 959   ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
 960   if (aOperation) {
 961     ModuleBase_ModelWidget* anActiveWidget = activeWidget();
 962     if (anActiveWidget) {
 963       ModuleBase_WidgetSelector* aWSelector = dynamic_cast<ModuleBase_WidgetSelector*>(anActiveWidget);
 964       if (aWSelector)
 965         aWSelector->activateSelectionAndFilters(true);
 966     }
 967   }
 968 }
 969
 970 //******************************************************
 971 void PartSet_Module::widgetStateChanged(int thePreviousState)
 972 {
 973   mySketchMgr->widgetStateChanged(thePreviousState);
 974 }
 975
 976 bool PartSet_Module::processEnter(const std::string& thePreviousAttributeID)
 977 {
 978   return mySketchReentrantMgr->processEnter(thePreviousAttributeID);
 979 }
 980
 981 //******************************************************
 982 void PartSet_Module::beforeOperationStarted(ModuleBase_Operation* theOperation)
 983 {
 984 }
 985
 986 //******************************************************
 987 void PartSet_Module::beforeOperationStopped(ModuleBase_Operation* theOperation)
 988 {
 989   if (PartSet_SketcherMgr::isSketchOperation(theOperation)) {
 990     mySketchMgr->stopSketch(theOperation);
 991   }
 992 }
 993
 994 //******************************************************
 995 void PartSet_Module::onBooleanOperationChange(int theOperation)
 996 {
 997   ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
 998   if (!aOperation)
 999     return;
1000   ModuleBase_IPropertyPanel* aPanel = aOperation->propertyPanel();
1001   switch (theOperation) {
1002   case 0:
1003     aPanel->setWindowTitle(tr("Cut"));
1004     break;
1005   case 1:
1006     aPanel->setWindowTitle(tr("Fuse"));
1007     break;
1008   case 2:
1009     aPanel->setWindowTitle(tr("Common"));
1010     break;
1011   }
1012 }