1 // Copyright (C) 2014-20xx CEA/DEN, EDF R&D
3 #include "PartSet_Module.h"
4 #include "PartSet_WidgetSketchLabel.h"
5 #include "PartSet_Validators.h"
6 #include "PartSet_Tools.h"
7 #include "PartSet_PreviewPlanes.h"
8 #include "PartSet_WidgetPoint2d.h"
9 #include "PartSet_WidgetPoint2dDistance.h"
10 #include "PartSet_WidgetPoint2DFlyout.h"
11 #include "PartSet_WidgetShapeSelector.h"
12 #include "PartSet_WidgetMultiSelector.h"
13 #include "PartSet_WidgetSubShapeSelector.h"
14 #include "PartSet_WidgetEditor.h"
15 #include "PartSet_WidgetFileSelector.h"
16 #include "PartSet_WidgetSketchCreator.h"
17 #include "PartSet_SketcherMgr.h"
18 #include "PartSet_SketcherReetntrantMgr.h"
19 #include "PartSet_ResultSketchPrs.h"
20 #include "PartSet_MenuMgr.h"
21 #include "PartSet_CustomPrs.h"
22 #include "PartSet_IconFactory.h"
23 #include "PartSet_WidgetChoice.h"
24 #include "PartSet_OverconstraintListener.h"
26 #include "PartSet_Filters.h"
27 #include "PartSet_FilterInfinite.h"
29 #include <PartSetPlugin_Remove.h>
30 #include <PartSetPlugin_Part.h>
31 #include <PartSetPlugin_Duplicate.h>
33 #include <ModuleBase_Operation.h>
34 #include <ModuleBase_OperationAction.h>
35 #include <ModuleBase_IViewer.h>
36 #include <ModuleBase_IViewWindow.h>
37 #include <ModuleBase_IPropertyPanel.h>
38 #include <ModuleBase_WidgetEditor.h>
39 #include <ModuleBase_WidgetValidated.h>
40 #include <ModuleBase_FilterFactory.h>
41 #include <ModuleBase_Tools.h>
42 #include <ModuleBase_OperationFeature.h>
43 #include <ModuleBase_WidgetFactory.h>
44 #include <ModuleBase_OperationDescription.h>
45 #include <ModuleBase_ViewerPrs.h>
47 #include <ModelAPI_Object.h>
48 #include <ModelAPI_Events.h>
49 #include <ModelAPI_Validator.h>
50 #include <ModelAPI_Data.h>
51 #include <ModelAPI_Session.h>
52 #include <ModelAPI_ResultBody.h>
53 #include <ModelAPI_AttributeString.h>
54 #include <ModelAPI_AttributeSelectionList.h>
55 #include <ModelAPI_Tools.h>
57 #include <GeomDataAPI_Point2D.h>
58 #include <GeomDataAPI_Point.h>
59 #include <GeomDataAPI_Dir.h>
61 #include <XGUI_Displayer.h>
62 #include <XGUI_Workshop.h>
63 #include <XGUI_OperationMgr.h>
64 #include <XGUI_PropertyPanel.h>
65 #include <XGUI_ModuleConnector.h>
66 #include <XGUI_ContextMenuMgr.h>
67 #include <XGUI_Tools.h>
68 #include <XGUI_ObjectsBrowser.h>
69 #include <XGUI_SelectionMgr.h>
70 #include <XGUI_DataModel.h>
71 #include <XGUI_ErrorMgr.h>
72 #include <XGUI_CustomPrs.h>
73 #include <XGUI_SelectionMgr.h>
74 #include <XGUI_ActionsMgr.h>
76 #include <SketchPlugin_Feature.h>
77 #include <SketchPlugin_Sketch.h>
78 #include <SketchPlugin_ConstraintAngle.h>
79 #include <SketchPlugin_ConstraintLength.h>
80 #include <SketchPlugin_ConstraintDistance.h>
81 #include <SketchPlugin_ConstraintParallel.h>
82 #include <SketchPlugin_ConstraintPerpendicular.h>
83 #include <SketchPlugin_ConstraintRadius.h>
85 #include <SketcherPrs_SymbolPrs.h>
86 #include <SketcherPrs_Coincident.h>
87 #include <SketcherPrs_Tools.h>
89 #include <Events_Loop.h>
90 #include <Config_PropManager.h>
91 #include <Config_Keywords.h>
93 #include <StdSelect_TypeOfFace.hxx>
94 #include <TopoDS_Vertex.hxx>
96 #include <TopoDS_Shape.hxx>
97 #include <BRep_Tool.hxx>
98 #include <AIS_Dimension.hxx>
101 #include <QMouseEvent>
104 #include <QApplication>
105 #include <QMessageBox>
106 #include <QMainWindow>
110 #include <GeomAlgoAPI_FaceBuilder.h>
111 #include <GeomDataAPI_Dir.h>
113 #include <SelectMgr_ListIteratorOfListOfFilter.hxx>
119 /*!Create and return new instance of XGUI_Module*/
120 extern "C" PARTSET_EXPORT ModuleBase_IModule* createModule(ModuleBase_IWorkshop* theWshop)
122 return new PartSet_Module(theWshop);
125 PartSet_Module::PartSet_Module(ModuleBase_IWorkshop* theWshop)
126 : ModuleBase_IModule(theWshop),
128 myIsOperationIsLaunched(false)
130 new PartSet_IconFactory();
132 mySketchMgr = new PartSet_SketcherMgr(this);
133 mySketchReentrantMgr = new PartSet_SketcherReetntrantMgr(theWshop);
135 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(theWshop);
136 XGUI_Workshop* aWorkshop = aConnector->workshop();
138 ModuleBase_IViewer* aViewer = theWshop->viewer();
139 connect(aViewer, SIGNAL(keyRelease(ModuleBase_IViewWindow*, QKeyEvent*)),
140 this, SLOT(onKeyRelease(ModuleBase_IViewWindow*, QKeyEvent*)));
141 connect(aViewer, SIGNAL(viewTransformed(int)),
142 SLOT(onViewTransformed(int)));
143 connect(aViewer, SIGNAL(viewCreated(ModuleBase_IViewWindow*)),
144 SLOT(onViewCreated(ModuleBase_IViewWindow*)));
145 myMenuMgr = new PartSet_MenuMgr(this);
146 myCustomPrs = new PartSet_CustomPrs(theWshop);
148 myOverconstraintListener = new PartSet_OverconstraintListener(theWshop);
150 Events_Loop* aLoop = Events_Loop::loop();
151 aLoop->registerListener(this, Events_Loop::eventByName(EVENT_DOCUMENT_CHANGED));
153 mySelectionFilters.Append(new PartSet_GlobalFilter(myWorkshop));
154 mySelectionFilters.Append(new PartSet_FilterInfinite(myWorkshop));
156 setDefaultConstraintShown();
158 Config_PropManager::registerProp("Visualization", "operation_parameter_color",
159 "Reference shape wireframe color in operation", Config_Prop::Color,
160 PartSet_CustomPrs::OPERATION_PARAMETER_COLOR());
161 Config_PropManager::registerProp("Visualization", "operation_result_color",
162 "Result shape wireframe color in operation", Config_Prop::Color,
163 PartSet_CustomPrs::OPERATION_RESULT_COLOR());
164 Config_PropManager::registerProp("Visualization", "operation_highlight_color",
165 "Multi selector item color in operation", Config_Prop::Color,
166 PartSet_CustomPrs::OPERATION_HIGHLIGHT_COLOR());
169 Config_PropManager::registerProp(SKETCH_TAB_NAME, "disable_input_fields", "Disable input fields",
170 Config_Prop::Boolean, "true");
173 PartSet_Module::~PartSet_Module()
175 SelectMgr_ListIteratorOfListOfFilter aIt(mySelectionFilters);
176 for (; aIt.More(); aIt.Next()) {
177 Handle(SelectMgr_Filter) aFilter = aIt.Value();
178 if (!aFilter.IsNull())
182 delete myOverconstraintListener;
185 void PartSet_Module::activateSelectionFilters()
187 SelectMgr_ListIteratorOfListOfFilter aIt(mySelectionFilters);
188 for (; aIt.More(); aIt.Next()) {
189 Handle(SelectMgr_Filter) aFilter = aIt.Value();
190 if (!aFilter.IsNull())
191 myWorkshop->viewer()->addSelectionFilter(aFilter);
195 void PartSet_Module::deactivateSelectionFilters()
197 SelectMgr_ListIteratorOfListOfFilter aIt(mySelectionFilters);
198 for (; aIt.More(); aIt.Next()) {
199 Handle(SelectMgr_Filter) aFilter = aIt.Value();
200 if (!aFilter.IsNull())
201 myWorkshop->viewer()->removeSelectionFilter(aFilter);
205 void PartSet_Module::storeSelection()
207 sketchMgr()->storeSelection();
210 void PartSet_Module::restoreSelection()
212 sketchMgr()->restoreSelection();
215 void PartSet_Module::registerValidators()
217 //Registering of validators
218 SessionPtr aMgr = ModelAPI_Session::get();
219 ModelAPI_ValidatorsFactory* aFactory = aMgr->validators();
220 aFactory->registerValidator("PartSet_DistanceSelection", new PartSet_DistanceSelection);
221 aFactory->registerValidator("PartSet_LengthSelection", new PartSet_LengthSelection);
222 aFactory->registerValidator("PartSet_PerpendicularSelection", new PartSet_PerpendicularSelection);
223 aFactory->registerValidator("PartSet_ParallelSelection", new PartSet_ParallelSelection);
224 aFactory->registerValidator("PartSet_RadiusSelection", new PartSet_RadiusSelection);
225 aFactory->registerValidator("PartSet_RigidSelection", new PartSet_RigidSelection);
226 aFactory->registerValidator("PartSet_CoincidentSelection", new PartSet_CoincidentSelection);
227 aFactory->registerValidator("PartSet_HVDirSelection", new PartSet_HVDirSelection);
228 aFactory->registerValidator("PartSet_TangentSelection", new PartSet_TangentSelection);
229 aFactory->registerValidator("PartSet_FilletSelection", new PartSet_FilletSelection);
230 aFactory->registerValidator("PartSet_AngleSelection", new PartSet_AngleSelection);
231 aFactory->registerValidator("PartSet_EqualSelection", new PartSet_EqualSelection);
232 aFactory->registerValidator("PartSet_CollinearSelection", new PartSet_CollinearSelection);
233 aFactory->registerValidator("PartSet_MiddlePointSelection", new PartSet_MiddlePointSelection);
234 aFactory->registerValidator("PartSet_DifferentObjects", new PartSet_DifferentObjectsValidator);
235 aFactory->registerValidator("PartSet_CoincidentAttr", new PartSet_CoincidentAttr);
238 void PartSet_Module::registerFilters()
240 //Registering of selection filters
241 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
242 ModuleBase_FilterFactory* aFactory = aConnector->selectionFilters();
245 void PartSet_Module::registerProperties()
247 Config_PropManager::registerProp(SKETCH_TAB_NAME, "planes_size", "Size", Config_Prop::Double,
249 Config_PropManager::registerProp(SKETCH_TAB_NAME, "planes_thickness", "Thickness",
250 Config_Prop::Integer, SKETCH_WIDTH);
251 Config_PropManager::registerProp(SKETCH_TAB_NAME, "rotate_to_plane", "Rotate to plane when selected",
252 Config_Prop::Boolean, "false");
255 void PartSet_Module::connectToPropertyPanel(ModuleBase_ModelWidget* theWidget, const bool isToConnect)
257 mySketchMgr->connectToPropertyPanel(theWidget, isToConnect);
260 void PartSet_Module::operationCommitted(ModuleBase_Operation* theOperation)
262 if (PartSet_SketcherMgr::isNestedSketchOperation(theOperation, sketchMgr()->activeSketch())) {
263 mySketchMgr->commitNestedSketch(theOperation);
266 /// Restart sketcher operations automatically
267 if (!mySketchReentrantMgr->operationCommitted(theOperation)) {
269 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>(theOperation);
270 if (aFOperation && !aFOperation->isEditOperation()) {
271 // the selection is cleared after commit the create operation
272 // in order to do not use the same selected objects in the restarted operation
273 // for common behaviour, the selection is cleared even if the operation is not restarted
274 getWorkshop()->selector()->clearSelection();
279 void PartSet_Module::operationAborted(ModuleBase_Operation* theOperation)
281 /// Restart sketcher operations automatically
282 mySketchReentrantMgr->operationAborted(theOperation);
285 void PartSet_Module::operationStarted(ModuleBase_Operation* theOperation)
287 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>
290 XGUI_Workshop* aWorkshop = XGUI_Tools::workshop(workshop());
291 XGUI_PropertyPanel* aPropertyPanel = aWorkshop->propertyPanel();
293 ModuleBase_ModelWidget* aFilledWidget = 0;
294 bool aPostonedWidgetActivation = false;
296 FeaturePtr aFeature = aFOperation->feature();
297 /// Restart sketcher operations automatically
298 /// it is important to call method of sketch reentrant manager before filling of PP
299 /// because it fills some created feature attributes, these new values should be used
300 /// to fill the property panel
301 mySketchReentrantMgr->operationStarted(theOperation);
303 aWorkshop->fillPropertyPanel(aFOperation);
304 // filling the operation values by the current selection
305 // if the operation can be committed after the controls filling, the method perform should
306 // be stopped. Otherwise unnecessary presentations can be shown(e.g. operation prs in sketch)
307 bool isOperationCommitted = false;
308 if (!aFOperation->isEditOperation()) {
309 std::string aGreedAttributeId = ModuleBase_Tools::findGreedAttribute(workshop(), aFeature);
310 // if there is a greed attribute, automatic commit by preselection for this feature is prohibited
311 aFilledWidget = aFOperation->activateByPreselection(aGreedAttributeId);
312 if (currentOperation() != aFOperation)
313 isOperationCommitted = true;
315 if (aGreedAttributeId.empty()) {
316 // a signal should be emitted before the next widget activation
317 // because, the activation of the next widget will give a focus to the widget. As a result
318 // the value of the widget is initialized. And commit may happens until the value is entered.
320 if (mySketchReentrantMgr->canBeCommittedByPreselection())
321 isOperationCommitted = mySketchMgr->operationActivatedByPreselection();
322 // activate the next obligatory widget
323 if (!isOperationCommitted)
324 aPropertyPanel->activateNextWidget(aFilledWidget);
327 else { // there is a greed widget
328 const QList<ModuleBase_ModelWidget*>& aWidgets = aPropertyPanel->modelWidgets();
329 std::string aFirstAttributeId = aWidgets.front()->attributeID();
330 // activate next widget after greeded if it is the first widget in the panel
331 // else the first panel widget is already activated by operation start
332 if (aFirstAttributeId == aGreedAttributeId)
333 aPostonedWidgetActivation = true;
336 } if (!isOperationCommitted) {
337 workshop()->updateCommandStatus();
338 aWorkshop->connectToPropertyPanel(true);
339 updateSketcherOnStart(aFOperation);
340 updatePresentationsOnStart(aFOperation);
342 // the objects of the current operation should be deactivated
343 QObjectPtrList anObjects;
344 anObjects.append(aFeature);
345 std::list<ResultPtr> aResults;
346 ModelAPI_Tools::allResults(aFeature, aResults);
347 std::list<ResultPtr>::const_iterator aIt;
348 for (aIt = aResults.begin(); aIt != aResults.end(); ++aIt) {
349 anObjects.append(*aIt);
351 QObjectPtrList::const_iterator anIt = anObjects.begin(), aLast = anObjects.end();
352 for (; anIt != aLast; anIt++)
353 aWorkshop->deactivateActiveObject(*anIt, false);
354 if (anObjects.size() > 0) {
355 XGUI_Displayer* aDisplayer = aWorkshop->displayer();
356 aDisplayer->updateViewer();
359 if (aPostonedWidgetActivation) {
360 // if the widget is an empty in the chain of activated widgets, the current operation
361 // is restarted. It should be performed after functionality of the operation starting
362 aPropertyPanel->activateNextWidget(aFilledWidget);
367 void PartSet_Module::updateSketcherOnStart(ModuleBase_Operation* theOperation)
369 if (PartSet_SketcherMgr::isSketchOperation(theOperation)) {
370 mySketchMgr->startSketch(theOperation);
372 else if (PartSet_SketcherMgr::isNestedSketchOperation(theOperation,
373 sketchMgr()->activeSketch())) {
374 mySketchMgr->startNestedSketch(theOperation);
378 void PartSet_Module::updatePresentationsOnStart(ModuleBase_Operation* theOperation)
380 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>(theOperation);
382 myCustomPrs->activate(aFOperation->feature(), ModuleBase_IModule::CustomizeArguments, true);
383 myCustomPrs->activate(aFOperation->feature(), ModuleBase_IModule::CustomizeResults, true);
387 void PartSet_Module::operationResumed(ModuleBase_Operation* theOperation)
389 ModuleBase_IModule::operationResumed(theOperation);
391 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>(theOperation);
393 myCustomPrs->activate(aFOperation->feature(), ModuleBase_IModule::CustomizeArguments, true);
394 myCustomPrs->activate(aFOperation->feature(), ModuleBase_IModule::CustomizeResults, true);
398 void PartSet_Module::operationStopped(ModuleBase_Operation* theOperation)
400 bool isModifiedArgs = myCustomPrs->deactivate(ModuleBase_IModule::CustomizeArguments, false);
401 bool isModifiedResults = myCustomPrs->deactivate(ModuleBase_IModule::CustomizeResults, false);
402 bool isModified = isModifiedArgs || isModifiedResults;
404 if (PartSet_SketcherMgr::isNestedSketchOperation(theOperation, sketchMgr()->activeSketch())) {
405 mySketchMgr->stopNestedSketch(theOperation);
407 else if (PartSet_SketcherMgr::isSketchOperation(theOperation))
408 setDefaultConstraintShown();
410 //VSV: Viewer is updated on feature update and redisplay
412 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(myWorkshop);
413 XGUI_Displayer* aDisplayer = aConnector->workshop()->displayer();
414 aDisplayer->updateViewer();
417 QMap<PartSet_Tools::ConstraintVisibleState, bool>::const_iterator anIt = myHasConstraintShown.begin(),
418 aLast = myHasConstraintShown.end();
419 for (; anIt != aLast; anIt++) {
420 mySketchMgr->updateBySketchParameters(anIt.key(), anIt.value());
424 ModuleBase_Operation* PartSet_Module::currentOperation() const
426 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
427 XGUI_OperationMgr* anOpMgr = aConnector->workshop()->operationMgr();
428 return anOpMgr->currentOperation();
431 bool PartSet_Module::canUndo() const
433 bool aCanUndo = false;
434 SessionPtr aMgr = ModelAPI_Session::get();
435 if (aMgr->hasModuleDocument() && aMgr->canUndo()) {
436 aCanUndo = !aMgr->isOperation();
437 if (!aCanUndo) // check the enable state additionally by sketch manager
438 aCanUndo = aMgr->canUndo();
443 bool PartSet_Module::canRedo() const
445 bool aCanRedo = false;
446 SessionPtr aMgr = ModelAPI_Session::get();
447 if (aMgr->hasModuleDocument() && aMgr->canRedo()) {
448 aCanRedo = !aMgr->isOperation();
449 if (!aCanRedo) // check the enable state additionally by sketch manager
450 aCanRedo = aMgr->canRedo();
455 bool PartSet_Module::canApplyAction(const ObjectPtr& theObject, const QString& theActionId) const
458 if (theActionId == "MOVE_CMD") {
459 FeaturePtr aFeature = ModelAPI_Feature::feature(theObject);
461 ResultPtr aResult = ModuleBase_Tools::firstResult(aFeature);
462 // part features can not be moved in the history.
463 if (aResult.get() && aResult->groupName() == ModelAPI_ResultPart::group())
470 bool PartSet_Module::canEraseObject(const ObjectPtr& theObject) const
472 // the sketch manager put the restriction to the objects erase
473 return mySketchMgr->canEraseObject(theObject);
476 bool PartSet_Module::canDisplayObject(const ObjectPtr& theObject) const
478 // the sketch manager put the restriction to the objects display
479 return mySketchMgr->canDisplayObject(theObject);
482 /*void PartSet_Module::processHiddenObject(const std::list<ObjectPtr>& theObjects)
484 mySketchMgr->processHiddenObject(theObjects);
487 bool PartSet_Module::canActivateSelection(const ObjectPtr& theObject) const
489 bool aCanActivate = ModuleBase_IModule::canActivateSelection(theObject);
491 ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
492 bool isSketchOp = PartSet_SketcherMgr::isSketchOperation(anOperation),
493 isNestedOp = PartSet_SketcherMgr::isNestedSketchOperation(anOperation,
494 sketchMgr()->activeSketch());
495 if (isSketchOp || isNestedOp) {
496 // in active sketch operation it is possible to activate operation object in selection
497 // in the edit operation, e.g. points of the line can be moved when the line is edited
498 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>(anOperation);
499 aCanActivate = aCanActivate || (aFOperation && aFOperation->isEditOperation());
504 bool PartSet_Module::addViewerMenu(const QMap<QString, QAction*>& theStdActions,
506 QMap<int, QAction*>& theMenuActions) const
508 return myMenuMgr->addViewerMenu(theStdActions, theParent, theMenuActions);
511 void PartSet_Module::updateViewerMenu(const QMap<QString, QAction*>& theStdActions)
513 myMenuMgr->updateViewerMenu(theStdActions);
516 bool PartSet_Module::isActionEnableStateFixed(const int theActionId) const
518 bool isEnabledFixed = false;
519 if (theActionId == XGUI_ActionsMgr::AcceptAll &&
520 mySketchReentrantMgr->isInternalEditStarted())
521 isEnabledFixed = true;
522 return isEnabledFixed;
525 QString PartSet_Module::getFeatureError(const FeaturePtr& theFeature)
527 QString anError = ModuleBase_IModule::getFeatureError(theFeature);
528 if (anError.isEmpty())
529 anError = sketchMgr()->getFeatureError(theFeature);
534 void PartSet_Module::grantedOperationIds(ModuleBase_Operation* theOperation,
535 QStringList& theIds) const
537 myMenuMgr->grantedOperationIds(theOperation, theIds);
539 if (PartSet_SketcherMgr::isSketchOperation(theOperation)) {
540 XGUI_Workshop* aWorkshop = getWorkshop();
541 theIds.append(aWorkshop->contextMenuMgr()->action("DELETE_CMD")->text());
545 void PartSet_Module::activeSelectionModes(QIntList& theModes)
548 if (mySketchMgr->activeSketch().get())
549 PartSet_SketcherMgr::sketchSelectionModes(theModes);
552 void PartSet_Module::customSubShapesSelectionModes(QIntList& theTypes)
554 if (theTypes.contains(TopAbs_FACE))
555 theTypes.append(SketcherPrs_Tools::Sel_Sketch_Face);
556 if (theTypes.contains(TopAbs_WIRE))
557 theTypes.append(SketcherPrs_Tools::Sel_Sketch_Wire);
560 bool PartSet_Module::isMouseOverWindow()
562 return mySketchMgr->isMouseOverWindow();
565 bool PartSet_Module::isSketchNeutralPointActivated() const
567 bool isNeutralPoint = true;
568 if (sketchReentranceMgr()->isInternalEditStarted())
569 isNeutralPoint = false;
570 if (myIsOperationIsLaunched)
571 isNeutralPoint = false;
573 return isNeutralPoint;
576 void PartSet_Module::closeDocument()
581 void PartSet_Module::clearViewer()
583 myCustomPrs->clearPrs();
585 XGUI_Workshop* aWorkshop = getWorkshop();
586 XGUI_Displayer* aDisplayer = aWorkshop->displayer();
587 aDisplayer->deactivateSelectionFilters();
590 void PartSet_Module::propertyPanelDefined(ModuleBase_Operation* theOperation)
592 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>(theOperation);
596 ModuleBase_IPropertyPanel* aPanel = aFOperation->propertyPanel();
597 // we have to manually activate the sketch label in edit mode
598 if (PartSet_SketcherMgr::isSketchOperation(aFOperation) && (aFOperation->isEditOperation()))
599 aPanel->activateWidget(aPanel->modelWidgets().first());
602 bool PartSet_Module::createWidgets(ModuleBase_Operation* theOperation,
603 QList<ModuleBase_ModelWidget*>& theWidgets) const
605 bool aProcessed = false;
607 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>(theOperation);
608 XGUI_Workshop* aWorkshop = getWorkshop();
609 XGUI_PropertyPanel* aPropertyPanel = aWorkshop->propertyPanel();
610 if (mySketchMgr->activeSketch().get() && aFOperation && aPropertyPanel) {
611 ModuleBase_ISelection* aSelection = workshop()->selection();
612 // click on a point in sketch leads here with the point is highlighted, not yet selected
613 QList<ModuleBase_ViewerPrsPtr> aPreselection = aSelection->getHighlighted();
614 if (aPreselection.size() == 1) {
615 ModuleBase_ViewerPrsPtr aSelectedPrs = aPreselection[0];
616 ObjectPtr anObject = aSelectedPrs->object();
618 FeaturePtr aFeature = ModelAPI_Feature::feature(anObject);
619 FeaturePtr anOpFeature = aFOperation->feature();
620 GeomShapePtr aShape = aSelectedPrs->shape();
621 // click on the digit of dimension constrain comes here with an empty shape, so we need the check
622 if (aFeature == anOpFeature && aShape.get() && !aShape->isNull()) {
623 const TopoDS_Shape& aTDShape = aShape->impl<TopoDS_Shape>();
624 AttributePtr anAttribute = PartSet_Tools::findAttributeBy2dPoint(anObject, aTDShape,
625 mySketchMgr->activeSketch());
626 if (anAttribute.get()) {
627 QString aXmlRepr = aFOperation->getDescription()->xmlRepresentation();
628 ModuleBase_WidgetFactory aFactory(aXmlRepr.toStdString(), workshop());
630 const std::string anAttributeId = anAttribute->id();
631 aFactory.createWidget(aPropertyPanel->contentWidget(), anAttributeId);
633 theWidgets = aFactory.getModelWidgets();
634 // it is possible that the point does not present in XML definition,
635 // in this case, we assume that it is not processed by this module
636 // e.g. "Intersection point" feature
637 aProcessed = !theWidgets.isEmpty();
645 void PartSet_Module::onSelectionChanged()
647 ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
651 bool isSketcherOp = false;
652 // An edit operation is enable only if the current opeation is the sketch operation
653 if (mySketchMgr->activeSketch()) {
654 if (PartSet_Tools::sketchPlane(mySketchMgr->activeSketch()))
655 isSketcherOp = PartSet_SketcherMgr::isSketchOperation(aOperation);
658 // Editing of constraints can be done on selection
659 ModuleBase_ISelection* aSelect = myWorkshop->selection();
660 QList<ModuleBase_ViewerPrsPtr> aSelected = aSelect->getSelected();
661 if (aSelected.size() == 1) {
662 ModuleBase_ViewerPrsPtr aPrs = aSelected.first();
663 ObjectPtr aObject = aPrs->object();
664 FeaturePtr aFeature = ModelAPI_Feature::feature(aObject);
666 std::string aId = aFeature->getKind();
667 if ((aId == SketchPlugin_ConstraintRadius::ID()) ||
668 (aId == SketchPlugin_ConstraintLength::ID()) ||
669 (aId == SketchPlugin_ConstraintDistance::ID()) ||
670 (aId == SketchPlugin_ConstraintAngle::ID())) {
671 editFeature(aFeature);
678 void PartSet_Module::onKeyRelease(ModuleBase_IViewWindow* theWnd, QKeyEvent* theEvent)
680 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
681 XGUI_OperationMgr* anOpMgr = aConnector->workshop()->operationMgr();
682 anOpMgr->onKeyReleased(theWnd->viewPort(), theEvent);
685 ModuleBase_ModelWidget* PartSet_Module::createWidgetByType(const std::string& theType,
687 Config_WidgetAPI* theWidgetApi)
689 ModuleBase_IWorkshop* aWorkshop = workshop();
690 XGUI_Workshop* aXUIWorkshop = getWorkshop();
691 ModuleBase_ModelWidget* aWgt = NULL;
692 if (theType == "sketch-start-label") {
693 PartSet_WidgetSketchLabel* aLabelWgt = new PartSet_WidgetSketchLabel(theParent, aWorkshop,
694 theWidgetApi, myHasConstraintShown);
695 connect(aLabelWgt, SIGNAL(planeSelected(const std::shared_ptr<GeomAPI_Pln>&)),
696 mySketchMgr, SLOT(onPlaneSelected(const std::shared_ptr<GeomAPI_Pln>&)));
697 connect(aLabelWgt, SIGNAL(showConstraintToggled(int, bool)),
698 mySketchMgr, SLOT(onShowConstraintsToggle(int, bool)));
700 } else if (theType == "sketch-2dpoint_selector") {
701 PartSet_WidgetPoint2D* aPointWgt = new PartSet_WidgetPoint2D(theParent, aWorkshop,
703 aPointWgt->setSketch(mySketchMgr->activeSketch());
704 connect(aPointWgt, SIGNAL(vertexSelected()), sketchReentranceMgr(), SLOT(onVertexSelected()));
706 }else if (theType == "sketch-2dpoint_flyout_selector") {
707 PartSet_WidgetPoint2DFlyout* aPointWgt = new PartSet_WidgetPoint2DFlyout(theParent, aWorkshop,
709 aPointWgt->setSketch(mySketchMgr->activeSketch());
710 connect(aPointWgt, SIGNAL(vertexSelected()), sketchReentranceMgr(), SLOT(onVertexSelected()));
712 } else if (theType == "point2ddistance") {
713 PartSet_WidgetPoint2dDistance* aDistanceWgt = new PartSet_WidgetPoint2dDistance(theParent,
714 aWorkshop, theWidgetApi);
715 aDistanceWgt->setSketch(mySketchMgr->activeSketch());
717 } else if (theType == "sketch_shape_selector") {
718 PartSet_WidgetShapeSelector* aShapeSelectorWgt =
719 new PartSet_WidgetShapeSelector(theParent, aWorkshop, theWidgetApi);
720 aShapeSelectorWgt->setSketcher(mySketchMgr->activeSketch());
721 aWgt = aShapeSelectorWgt;
722 } else if (theType == "sketch_multi_selector") {
723 PartSet_WidgetMultiSelector* aShapeSelectorWgt =
724 new PartSet_WidgetMultiSelector(theParent, aWorkshop, theWidgetApi);
725 aShapeSelectorWgt->setSketcher(mySketchMgr->activeSketch());
726 aWgt = aShapeSelectorWgt;
728 else if (theType == "sketch_sub_shape_selector") {
729 PartSet_WidgetSubShapeSelector* aSubShapeSelectorWgt =
730 new PartSet_WidgetSubShapeSelector(theParent, aWorkshop, theWidgetApi);
731 aSubShapeSelectorWgt->setSketcher(mySketchMgr->activeSketch());
732 aWgt = aSubShapeSelectorWgt;
734 else if (theType == WDG_DOUBLEVALUE_EDITOR) {
735 aWgt = new PartSet_WidgetEditor(theParent, aWorkshop, theWidgetApi);
736 } else if (theType == "export_file_selector") {
737 aWgt = new PartSet_WidgetFileSelector(theParent, aWorkshop, theWidgetApi);
738 } else if (theType == "sketch_launcher") {
739 aWgt = new PartSet_WidgetSketchCreator(theParent, this, theWidgetApi);
740 } else if (theType == "module_choice") {
741 aWgt = new PartSet_WidgetChoice(theParent, theWidgetApi);
742 connect(aWgt, SIGNAL(itemSelected(ModuleBase_ModelWidget*, int)),
743 this, SLOT(onChoiceChanged(ModuleBase_ModelWidget*, int)));
748 ModuleBase_ModelWidget* PartSet_Module::activeWidget() const
750 ModuleBase_ModelWidget* anActiveWidget = 0;
752 anActiveWidget = mySketchReentrantMgr->internalActiveWidget();
753 if (!anActiveWidget) {
754 ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
756 ModuleBase_IPropertyPanel* aPanel = aOperation->propertyPanel();
757 anActiveWidget = aPanel->activeWidget();
760 return anActiveWidget;
763 bool PartSet_Module::deleteObjects()
765 bool isProcessed = false;
767 XGUI_Workshop* aWorkshop = getWorkshop();
768 XGUI_OperationMgr* anOpMgr = aWorkshop->operationMgr();
770 //SessionPtr aMgr = ModelAPI_Session::get();
771 // 1. check whether the delete should be processed in the module
772 ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
773 bool isSketchOp = PartSet_SketcherMgr::isSketchOperation(anOperation),
774 isNestedOp = PartSet_SketcherMgr::isNestedSketchOperation(anOperation,
775 sketchMgr()->activeSketch());
776 if (isSketchOp || isNestedOp) {
778 // 2. find selected presentations
779 // selected objects should be collected before the current operation abort because
780 // the abort leads to selection lost on constraint objects. It can be corrected after #386 issue
781 ModuleBase_ISelection* aSel = workshop()->selection();
782 QObjectPtrList aSelectedObj = aSel->selectedPresentations();
783 // if there are no selected objects in the viewer, that means that the selection in another
784 // place cased this method. It is necessary to return the false value to understande in above
785 // method that delete is not processed
786 if (aSelectedObj.count() == 0)
789 // avoid delete of the objects, which are not belong to the current sketch
790 // in order to do not delete results of other sketches
791 QObjectPtrList aSketchObjects;
792 QObjectPtrList::const_iterator anIt = aSelectedObj.begin(), aLast = aSelectedObj.end();
793 for ( ; anIt != aLast; anIt++) {
794 ObjectPtr anObject = *anIt;
795 if (mySketchMgr->isObjectOfSketch(anObject)) {
796 // sketch feature should be used in this list because workshop deletes features only
797 // results are skipped
798 FeaturePtr aSketchFeature = ModelAPI_Feature::feature(anObject);
799 aSketchObjects.append(aSketchFeature);
802 // if the selection contains only local selected presentations from other sketches,
803 // the Delete operation should not be done at all
804 if (aSketchObjects.size() == 0)
807 // 3. start operation
808 QString aDescription = aWorkshop->contextMenuMgr()->action("DELETE_CMD")->text();
809 ModuleBase_OperationAction* anOpAction = new ModuleBase_OperationAction(aDescription, this);
811 // the active nested sketch operation should be aborted unconditionally
812 // the Delete action should be additionally granted for the Sketch operation
813 // in order to do not abort/commit it
814 if (!anOpMgr->canStartOperation(anOpAction->id()))
815 return true; // the objects are processed but can not be deleted
817 anOpMgr->startOperation(anOpAction);
819 // WORKAROUND, should be done to avoid viewer highlight update after deletetion of objects
820 // the problem is in AIS Dimensions recompute if a line and the dim are removed, line is the first
821 // it causes the AIS recompute, where the base line is null, the result is empty AIS in the viewer
822 XGUI_Tools::workshop(myWorkshop)->selector()->clearSelection();
824 // 4. delete features
825 // sketch feature should be skipped, only sub-features can be removed
826 // when sketch operation is active
827 aWorkshop->deleteFeatures(aSketchObjects);
829 anOpMgr->commitOperation();
834 void PartSet_Module::onFeatureTriggered()
836 // is commented for imp: Unpressing the button of the current action must behave like
837 // a validation if the entity can be created (instead of Cancel, as currently)
838 /*QAction* aCmd = dynamic_cast<QAction*>(sender());
839 if (aCmd->isCheckable() && aCmd->isChecked()) {
840 // 1. check whether the delete should be processed in the module
841 ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
842 bool isNestedOp = PartSet_SketcherMgr::isNestedCreateOperation(anOperation);
844 // in case if in the viewer nothing is displayed, the create operation should not be
845 // comitted even if all values of the feature are initialized
846 if (!mySketchMgr->canDisplayCurrentCreatedFeature()) {
847 // the action information should be saved before the operation is aborted
848 // because this abort leads to update command status, which unchecks this action
849 anOperation->abort();
850 launchOperation(aCmd->data().toString());
854 ModuleBase_IModule::onFeatureTriggered();
857 void PartSet_Module::editFeature(FeaturePtr theFeature)
859 storeConstraintsState(theFeature->getKind());
860 ModuleBase_IModule::editFeature(theFeature);
863 bool PartSet_Module::canCommitOperation() const
868 void PartSet_Module::launchOperation(const QString& theCmdId)
870 myIsOperationIsLaunched = true;
871 storeConstraintsState(theCmdId.toStdString());
872 updateConstraintsState(theCmdId.toStdString());
874 ModuleBase_IModule::launchOperation(theCmdId);
876 myIsOperationIsLaunched = false;
879 void PartSet_Module::storeConstraintsState(const std::string& theFeatureKind)
881 if (myWorkshop->currentOperation() &&
882 myWorkshop->currentOperation()->id().toStdString() == SketchPlugin_Sketch::ID()) {
883 const QMap<PartSet_Tools::ConstraintVisibleState, bool>& aShownStates =
884 mySketchMgr->showConstraintStates();
885 myHasConstraintShown = aShownStates;
889 void PartSet_Module::updateConstraintsState(const std::string& theFeatureKind)
891 if (PartSet_SketcherMgr::constraintsIdList().contains(theFeatureKind.c_str()) ||
892 PartSet_SketcherMgr::replicationsIdList().contains(theFeatureKind.c_str())) {
893 // Show constraints if a constraint was anOperation
894 mySketchMgr->updateBySketchParameters(PartSet_Tools::Geometrical, true);
895 mySketchMgr->updateBySketchParameters(PartSet_Tools::Dimensional, true);
896 mySketchMgr->updateBySketchParameters(PartSet_Tools::Expressions,
897 myHasConstraintShown[PartSet_Tools::Expressions]);
901 void PartSet_Module::onObjectDisplayed(ObjectPtr theObject, AISObjectPtr theAIS)
903 Handle(AIS_InteractiveObject) anAIS = theAIS->impl<Handle(AIS_InteractiveObject)>();
904 if (!anAIS.IsNull()) {
905 Handle(AIS_InteractiveContext) aCtx = anAIS->GetContext();
906 Handle(AIS_Dimension) aDim = Handle(AIS_Dimension)::DownCast(anAIS);
907 if (!aDim.IsNull()) {
908 aCtx->SetZLayer(aDim, myVisualLayerId);
910 Handle(SketcherPrs_SymbolPrs) aCons = Handle(SketcherPrs_SymbolPrs)::DownCast(anAIS);
912 aCtx->SetZLayer(aCons, myVisualLayerId);
917 void PartSet_Module::onBeforeObjectErase(ObjectPtr theObject, AISObjectPtr theAIS)
920 // it should be recomputed in order to disappear in the viewer if the corresponded object
922 //if (myCustomPrs->isActive())
923 // myCustomPrs->redisplay(theObject, false);
926 void PartSet_Module::onViewTransformed(int theTrsfType)
928 // Set length of arrows constant in pixel size
929 // if the operation is panning or rotate or panglobal then do nothing
930 if ((theTrsfType == 1) || (theTrsfType == 3) || (theTrsfType == 4))
932 ModuleBase_IViewer* aViewer = myWorkshop->viewer();
933 Handle(AIS_InteractiveContext) aContext = aViewer->AISContext();
934 if (aContext.IsNull())
937 //Handle(V3d_View) aView = aViewer->activeView();
939 XGUI_Workshop* aWorkshop = getWorkshop();
940 XGUI_Displayer* aDisplayer = aWorkshop->displayer();
941 Handle(V3d_Viewer) aV3dViewer = aContext->CurrentViewer();
942 Handle(V3d_View) aView;
944 for (aV3dViewer->InitDefinedViews();
945 aV3dViewer->MoreDefinedViews();
946 aV3dViewer->NextDefinedViews()) {
947 Handle(V3d_View) aV = aV3dViewer->DefinedView();
948 double aS = aV->Scale();
956 double aLen = aView->Convert(SketcherPrs_Tools::getDefaultArrowSize());
958 double aPrevLen = SketcherPrs_Tools::getArrowSize();
959 SketcherPrs_Tools::setArrowSize(aLen);
960 const double aPrevScale = aViewer->Scale(aViewer->activeView());
961 const double aCurScale = aViewer->activeView()->Camera()->Scale();
962 aViewer->SetScale(aViewer->activeView(), aCurScale);
963 SketcherPrs_Tools::setTextHeight (aCurScale / aPrevScale * SketcherPrs_Tools::getTextHeight());
964 bool isModified = false;
965 QList<AISObjectPtr> aPrsList = aDisplayer->displayedPresentations();
966 foreach (AISObjectPtr aAIS, aPrsList) {
967 Handle(AIS_InteractiveObject) aAisObj = aAIS->impl<Handle(AIS_InteractiveObject)>();
969 Handle(AIS_Dimension) aDim = Handle(AIS_Dimension)::DownCast(aAisObj);
970 if (!aDim.IsNull()) {
971 aDim->DimensionAspect()->ArrowAspect()->SetLength(aLen);
972 aContext->Redisplay(aDim, false);
977 aDisplayer->updateViewer();
980 void PartSet_Module::activateCustomPrs(const FeaturePtr& theFeature, const ModuleBase_CustomizeFlag& theFlag,
981 const bool theUpdateViewer)
983 myCustomPrs->activate(theFeature, theFlag, theUpdateViewer);
986 void PartSet_Module::deactivateCustomPrs(const ModuleBase_CustomizeFlag& theFlag,
987 const bool theUpdateViewer)
989 myCustomPrs->deactivate(theFlag, theUpdateViewer);
992 bool PartSet_Module::customisePresentation(ResultPtr theResult, AISObjectPtr thePrs,
993 std::shared_ptr<GeomAPI_ICustomPrs> theCustomPrs)
995 bool aCustomized = false;
997 XGUI_Workshop* aWorkshop = getWorkshop();
998 XGUI_Displayer* aDisplayer = aWorkshop->displayer();
999 ObjectPtr anObject = aDisplayer->getObject(thePrs);
1003 if (!theResult.get()) {
1004 bool isConflicting = myOverconstraintListener->isConflictingObject(anObject);
1005 // customize sketch symbol presentation
1007 Handle(AIS_InteractiveObject) anAISIO = thePrs->impl<Handle(AIS_InteractiveObject)>();
1008 if (!anAISIO.IsNull()) {
1009 if (!Handle(SketcherPrs_SymbolPrs)::DownCast(anAISIO).IsNull()) {
1010 Handle(SketcherPrs_SymbolPrs) aPrs = Handle(SketcherPrs_SymbolPrs)::DownCast(anAISIO);
1011 if (!aPrs.IsNull()) {
1012 std::vector<int> aColor;
1013 myOverconstraintListener->getConflictingColor(aColor);
1014 aPrs->SetConflictingConstraint(isConflicting, aColor);
1017 } else if (!Handle(SketcherPrs_Coincident)::DownCast(anAISIO).IsNull()) {
1018 Handle(SketcherPrs_Coincident) aPrs = Handle(SketcherPrs_Coincident)::DownCast(anAISIO);
1019 if (!aPrs.IsNull()) {
1020 std::vector<int> aColor;
1021 myOverconstraintListener->getConflictingColor(aColor);
1022 aPrs->SetConflictingConstraint(isConflicting, aColor);
1028 // customize sketch dimension constraint presentation
1030 std::vector<int> aColor;
1031 if (isConflicting) {
1032 myOverconstraintListener->getConflictingColor(aColor);
1035 XGUI_CustomPrs::getDefaultColor(anObject, true, aColor);
1036 if (!aColor.empty()) {
1037 aCustomized = thePrs->setColor(aColor[0], aColor[1], aColor[2]);
1041 // customize dimentional constrains
1042 sketchMgr()->customizePresentation(anObject);
1047 bool PartSet_Module::customizeObject(ObjectPtr theObject, const ModuleBase_CustomizeFlag& theFlag,
1048 const bool theUpdateViewer)
1050 bool isRedisplayed = false;
1051 if (myCustomPrs->isActive(theFlag))
1052 isRedisplayed = myCustomPrs->redisplay(theObject, theFlag, theUpdateViewer);
1054 return isRedisplayed;
1057 void PartSet_Module::customizeObjectBrowser(QWidget* theObjectBrowser)
1059 XGUI_ObjectsBrowser* aOB = dynamic_cast<XGUI_ObjectsBrowser*>(theObjectBrowser);
1061 QLabel* aLabel = aOB->activeDocLabel();
1062 aLabel->installEventFilter(myMenuMgr);
1063 connect(aLabel, SIGNAL(customContextMenuRequested(const QPoint&)),
1064 SLOT(onActiveDocPopup(const QPoint&)));
1065 //QPalette aPalet = aLabel->palette();
1066 //aPalet.setColor(QPalette::Text, QColor(0, 72, 140));
1067 //aLabel->setPalette(aPalet);
1068 aOB->treeView()->setExpandsOnDoubleClick(false);
1069 connect(aOB->treeView(), SIGNAL(doubleClicked(const QModelIndex&)),
1070 SLOT(onTreeViewDoubleClick(const QModelIndex&)));
1074 void PartSet_Module::onActiveDocPopup(const QPoint& thePnt)
1076 SessionPtr aMgr = ModelAPI_Session::get();
1077 QAction* aActivatePartAction = myMenuMgr->action("ACTIVATE_PARTSET_CMD");
1079 XGUI_Workshop* aWorkshop = getWorkshop();
1080 QLabel* aHeader = aWorkshop->objectBrowser()->activeDocLabel();
1082 aActivatePartAction->setEnabled((aMgr->activeDocument() != aMgr->moduleDocument()));
1085 aMenu.addAction(aActivatePartAction);
1086 aMenu.exec(aHeader->mapToGlobal(thePnt));
1089 Handle(AIS_InteractiveObject) PartSet_Module::createPresentation(const ResultPtr& theResult)
1091 return mySketchMgr->createPresentation(theResult);
1095 ObjectPtr PartSet_Module::findPresentedObject(const AISObjectPtr& theAIS) const
1098 ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
1100 /// If last line finished on vertex the lines creation sequence has to be break
1101 ModuleBase_IPropertyPanel* aPanel = aOperation->propertyPanel();
1103 ModuleBase_ModelWidget* anActiveWidget = aPanel->activeWidget();
1104 // if there is an active widget, find the presented object in it
1105 if (!anActiveWidget)
1106 anActiveWidget = aPanel->preselectionWidget();
1108 ModuleBase_WidgetValidated* aWidgetValidated = dynamic_cast<ModuleBase_WidgetValidated*>
1110 if (aWidgetValidated)
1111 anObject = aWidgetValidated->findPresentedObject(theAIS);
1117 bool PartSet_Module::canBeShaded(Handle(AIS_InteractiveObject) theAIS) const
1119 bool aCanBeShaged = true;
1121 Handle(PartSet_ResultSketchPrs) aPrs = Handle(PartSet_ResultSketchPrs)::DownCast(theAIS);
1123 aCanBeShaged = false;
1125 return aCanBeShaged;
1128 void PartSet_Module::addObjectBrowserMenu(QMenu* theMenu) const
1130 QObjectPtrList aObjects = myWorkshop->selection()->selectedObjects();
1131 int aSelected = aObjects.size();
1132 SessionPtr aMgr = ModelAPI_Session::get();
1133 QAction* aActivatePartAction = myMenuMgr->action("ACTIVATE_PART_CMD");
1135 ModuleBase_Operation* aCurrentOp = myWorkshop->currentOperation();
1136 if (aSelected == 1) {
1137 bool hasResult = false;
1138 bool hasFeature = false;
1139 bool hasParameter = false;
1140 bool hasCompositeOwner = false;
1141 ModuleBase_Tools::checkObjects(aObjects, hasResult, hasFeature, hasParameter,
1143 ObjectPtr aObject = aObjects.first();
1145 ResultPartPtr aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aObject);
1146 FeaturePtr aFeature = std::dynamic_pointer_cast<ModelAPI_Feature>(aObject);
1147 bool isPart = aPart.get() ||
1148 (aFeature.get() && (aFeature->getKind() == PartSetPlugin_Part::ID()));
1150 DocumentPtr aPartDoc;
1152 aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aFeature->firstResult());
1154 if (aPart.get()) // this may be null is Part feature is disabled
1155 aPartDoc = aPart->partDoc();
1157 theMenu->addAction(aActivatePartAction);
1158 aActivatePartAction->setEnabled((aMgr->activeDocument() != aPartDoc));
1160 } else if (aObject->document() == aMgr->activeDocument()) {
1161 if (hasParameter || hasFeature) {
1162 myMenuMgr->action("EDIT_CMD")->setEnabled(true);
1163 theMenu->addAction(myMenuMgr->action("EDIT_CMD"));
1164 if (aCurrentOp && aFeature.get()) {
1165 if (aCurrentOp->id().toStdString() == aFeature->getKind())
1166 myMenuMgr->action("EDIT_CMD")->setEnabled(false);
1171 ResultBodyPtr aResult = std::dynamic_pointer_cast<ModelAPI_ResultBody>(aObject);
1173 theMenu->addAction(myMenuMgr->action("SELECT_PARENT_CMD"));
1176 bool aNotDeactivate = (aCurrentOp == 0);
1177 if (!aNotDeactivate) {
1178 aActivatePartAction->setEnabled(false);
1182 void PartSet_Module::processEvent(const std::shared_ptr<Events_Message>& theMessage)
1184 if (theMessage->eventID() == Events_Loop::loop()->eventByName(EVENT_DOCUMENT_CHANGED)) {
1185 // Do not change activation of parts if an operation active
1186 static QStringList aAllowActivationList;
1187 if (aAllowActivationList.isEmpty())
1188 aAllowActivationList <<
1189 QString(PartSetPlugin_Part::ID().c_str()) <<
1190 QString(PartSetPlugin_Duplicate::ID().c_str()) <<
1191 QString(PartSetPlugin_Remove::ID().c_str());
1192 if (myWorkshop->currentOperation() &&
1193 (!aAllowActivationList.contains(myWorkshop->currentOperation()->id())))
1195 XGUI_Workshop* aWorkshop = getWorkshop();
1196 XGUI_DataTree* aTreeView = aWorkshop->objectBrowser()->treeView();
1197 QLabel* aLabel = aWorkshop->objectBrowser()->activeDocLabel();
1198 QPalette aPalet = aLabel->palette();
1200 SessionPtr aMgr = ModelAPI_Session::get();
1201 DocumentPtr aActiveDoc = aMgr->activeDocument();
1202 if (aActivePartIndex.isValid())
1203 aTreeView->setExpanded(aActivePartIndex, false);
1204 XGUI_DataModel* aDataModel = aWorkshop->objectBrowser()->dataModel();
1205 aActivePartIndex = aDataModel->documentRootIndex(aActiveDoc);
1206 if (aActivePartIndex.isValid())
1207 aTreeView->setExpanded(aActivePartIndex, true);
1209 aLabel->setPalette(aPalet);
1210 aWorkshop->updateCommandStatus();
1212 // Update displayed objects in order to update active color
1213 XGUI_Displayer* aDisplayer = aWorkshop->displayer();
1214 QObjectPtrList aObjects = aDisplayer->displayedObjects();
1216 foreach(ObjectPtr aObj, aObjects) {
1217 //TODO: replace by redisplay event.
1218 aHidden = !aObj->data() || !aObj->data()->isValid() ||
1219 aObj->isDisabled() || (!aObj->isDisplayed());
1221 aDisplayer->redisplay(aObj, false);
1223 aDisplayer->updateViewer();
1227 void PartSet_Module::onTreeViewDoubleClick(const QModelIndex& theIndex)
1229 if (myWorkshop->currentOperation()) // Do not change activation of parts if an operation active
1231 SessionPtr aMgr = ModelAPI_Session::get();
1232 if (!theIndex.isValid()) {
1233 aMgr->setActiveDocument(aMgr->moduleDocument());
1236 if (theIndex.column() != 0) // Use only first column
1239 XGUI_Workshop* aWorkshop = getWorkshop();
1240 XGUI_DataModel* aDataModel = aWorkshop->objectBrowser()->dataModel();
1241 // De not use non editable Indexes
1242 if ((aDataModel->flags(theIndex) & Qt::ItemIsSelectable) == 0)
1244 ObjectPtr aObj = aDataModel->object(theIndex);
1246 ResultPartPtr aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aObj);
1247 if (!aPart.get()) { // Probably this is Feature
1248 FeaturePtr aPartFeature = std::dynamic_pointer_cast<ModelAPI_Feature>(aObj);
1249 if (aPartFeature.get() && (aPartFeature->getKind() == PartSetPlugin_Part::ID())) {
1250 aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aPartFeature->firstResult());
1253 if (aPart.get()) { // if this is a part
1254 if (aPart->partDoc() == aMgr->activeDocument()) {
1255 myMenuMgr->activatePartSet();
1263 void PartSet_Module::onViewCreated(ModuleBase_IViewWindow*)
1265 // z layer is created for all started operations in order to visualize operation AIS presentation
1267 Handle(AIS_InteractiveContext) aContext = myWorkshop->viewer()->AISContext();
1268 if (aContext.IsNull())
1271 Handle(V3d_Viewer) aViewer = aContext->CurrentViewer();
1272 if (myVisualLayerId == 0) {
1273 if (myVisualLayerId == 0)
1274 aViewer->AddZLayer(myVisualLayerId);
1276 TColStd_SequenceOfInteger aZList;
1277 aViewer->GetAllZLayers(aZList);
1278 bool aFound = false;
1279 for (int i = 1; i <= aZList.Length(); i++) {
1280 if (aZList(i) == myVisualLayerId) {
1286 aViewer->AddZLayer(myVisualLayerId);
1288 // if there is an active operation with validated widget,
1289 // the filters of this widget should be activated in the created view
1290 ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
1292 ModuleBase_ModelWidget* anActiveWidget = activeWidget();
1293 if (anActiveWidget) {
1294 ModuleBase_WidgetSelector* aWSelector = dynamic_cast<ModuleBase_WidgetSelector*>(anActiveWidget);
1296 aWSelector->activateSelectionAndFilters(true);
1301 //******************************************************
1302 void PartSet_Module::widgetStateChanged(int thePreviousState)
1304 mySketchMgr->widgetStateChanged(thePreviousState);
1307 bool PartSet_Module::processEnter(const std::string& thePreviousAttributeID)
1309 return mySketchReentrantMgr->processEnter(thePreviousAttributeID);
1312 //******************************************************
1313 void PartSet_Module::beforeOperationStopped(ModuleBase_Operation* theOperation)
1315 if (PartSet_SketcherMgr::isSketchOperation(theOperation)) {
1316 mySketchMgr->stopSketch(theOperation);
1320 //******************************************************
1321 GeomShapePtr PartSet_Module::findShape(const AttributePtr& theAttribute)
1323 GeomShapePtr aGeomShape;
1325 ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
1326 if (anOperation && PartSet_SketcherMgr::isNestedSketchOperation(anOperation,
1327 sketchMgr()->activeSketch())) {
1328 aGeomShape = PartSet_Tools::findShapeBy2DPoint(theAttribute, myWorkshop);
1333 //******************************************************
1334 AttributePtr PartSet_Module::findAttribute(const ObjectPtr& theObject,
1335 const GeomShapePtr& theGeomShape)
1337 AttributePtr anAttribute;
1338 GeomShapePtr aGeomShape = theGeomShape;
1339 if (!aGeomShape.get()) {
1340 // processing shape of result, e.g. sketch circle center is selected, this is a result
1341 // the geom shape is empty, the shape of result should be used
1342 ResultPtr aResult = std::dynamic_pointer_cast<ModelAPI_Result>(theObject);
1343 if (aResult.get()) {
1344 aGeomShape = aResult->shape();
1348 if (aGeomShape.get()) {
1349 TopoDS_Shape aTDSShape = aGeomShape->impl<TopoDS_Shape>();
1350 return PartSet_Tools::findAttributeBy2dPoint(theObject, aTDSShape,
1351 mySketchMgr->activeSketch());
1356 //******************************************************
1357 void PartSet_Module::onChoiceChanged(ModuleBase_ModelWidget* theWidget,
1360 PartSet_WidgetChoice* aChoiceWidget = dynamic_cast<PartSet_WidgetChoice*>(theWidget);
1364 QString aChoiceTitle = aChoiceWidget->getPropertyPanelTitle(theIndex);
1365 if (!aChoiceTitle.isEmpty()) {
1366 ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
1369 ModuleBase_IPropertyPanel* aPanel = aOperation->propertyPanel();
1371 aPanel->setWindowTitle(aChoiceTitle);
1375 //******************************************************
1376 XGUI_Workshop* PartSet_Module::getWorkshop() const
1378 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
1379 return aConnector->workshop();
1382 //******************************************************
1383 void PartSet_Module::setDefaultConstraintShown()
1385 myHasConstraintShown[PartSet_Tools::Geometrical] = true;
1386 myHasConstraintShown[PartSet_Tools::Dimensional] = true;
1387 myHasConstraintShown[PartSet_Tools::Expressions] = false;