1 // Copyright (C) 2014-20xx CEA/DEN, EDF R&D
3 #include "PartSet_Module.h"
4 #include "PartSet_WidgetSketchLabel.h"
5 #include "PartSet_Validators.h"
6 #include "PartSet_Tools.h"
7 #include "PartSet_WidgetPoint2d.h"
8 #include "PartSet_WidgetPoint2dDistance.h"
9 #include "PartSet_WidgetPoint2DFlyout.h"
10 #include "PartSet_WidgetShapeSelector.h"
11 #include "PartSet_WidgetMultiSelector.h"
12 #include "PartSet_WidgetMultiSelectorComposite.h"
13 #include "PartSet_WidgetEditor.h"
14 #include "PartSet_WidgetFileSelector.h"
15 #include "PartSet_WidgetSketchCreator.h"
16 #include "PartSet_SketcherMgr.h"
17 #include "PartSet_SketcherReetntrantMgr.h"
18 #include "PartSet_MenuMgr.h"
19 #include "PartSet_CustomPrs.h"
20 #include "PartSet_IconFactory.h"
21 #include "PartSet_WidgetChoice.h"
22 #include "PartSet_OverconstraintListener.h"
24 #include "PartSet_Filters.h"
25 #include "PartSet_FilterInfinite.h"
27 #include <PartSetPlugin_Remove.h>
28 #include <PartSetPlugin_Part.h>
29 #include <PartSetPlugin_Duplicate.h>
31 #include <ModuleBase_Operation.h>
32 #include <ModuleBase_OperationAction.h>
33 #include <ModuleBase_IViewer.h>
34 #include <ModuleBase_IViewWindow.h>
35 #include <ModuleBase_IPropertyPanel.h>
36 #include <ModuleBase_WidgetEditor.h>
37 #include <ModuleBase_WidgetValidated.h>
38 #include <ModuleBase_FilterFactory.h>
39 #include <ModuleBase_Tools.h>
40 #include <ModuleBase_OperationFeature.h>
41 #include <ModuleBase_WidgetFactory.h>
42 #include <ModuleBase_OperationDescription.h>
44 #include <ModelAPI_Object.h>
45 #include <ModelAPI_Events.h>
46 #include <ModelAPI_Validator.h>
47 #include <ModelAPI_Data.h>
48 #include <ModelAPI_Session.h>
49 #include <ModelAPI_ResultBody.h>
50 #include <ModelAPI_AttributeString.h>
52 #include <GeomDataAPI_Point2D.h>
53 #include <GeomDataAPI_Point.h>
54 #include <GeomDataAPI_Dir.h>
56 #include <XGUI_Displayer.h>
57 #include <XGUI_Workshop.h>
58 #include <XGUI_OperationMgr.h>
59 #include <XGUI_PropertyPanel.h>
60 #include <XGUI_ModuleConnector.h>
61 #include <XGUI_ContextMenuMgr.h>
62 #include <XGUI_Tools.h>
63 #include <XGUI_ObjectsBrowser.h>
64 #include <XGUI_SelectionMgr.h>
65 #include <XGUI_DataModel.h>
66 #include <XGUI_ErrorMgr.h>
67 #include <XGUI_CustomPrs.h>
69 #include <SketchPlugin_Feature.h>
70 #include <SketchPlugin_Sketch.h>
71 #include <SketchPlugin_ConstraintAngle.h>
72 #include <SketchPlugin_ConstraintLength.h>
73 #include <SketchPlugin_ConstraintDistance.h>
74 #include <SketchPlugin_ConstraintParallel.h>
75 #include <SketchPlugin_ConstraintPerpendicular.h>
76 #include <SketchPlugin_ConstraintRadius.h>
78 #include <SketcherPrs_SymbolPrs.h>
79 #include <SketcherPrs_Tools.h>
81 #include <Events_Loop.h>
82 #include <Config_PropManager.h>
83 #include <Config_Keywords.h>
85 #include <StdSelect_TypeOfFace.hxx>
86 #include <TopoDS_Vertex.hxx>
88 #include <TopoDS_Shape.hxx>
89 #include <BRep_Tool.hxx>
90 #include <AIS_Dimension.hxx>
93 #include <QMouseEvent>
96 #include <QApplication>
97 #include <QMessageBox>
98 #include <QMainWindow>
102 #include <GeomAlgoAPI_FaceBuilder.h>
103 #include <GeomDataAPI_Dir.h>
105 #include <SelectMgr_ListIteratorOfListOfFilter.hxx>
111 /*!Create and return new instance of XGUI_Module*/
112 extern "C" PARTSET_EXPORT ModuleBase_IModule* createModule(ModuleBase_IWorkshop* theWshop)
114 return new PartSet_Module(theWshop);
117 PartSet_Module::PartSet_Module(ModuleBase_IWorkshop* theWshop)
118 : ModuleBase_IModule(theWshop),
121 new PartSet_IconFactory();
123 mySketchMgr = new PartSet_SketcherMgr(this);
124 mySketchReentrantMgr = new PartSet_SketcherReetntrantMgr(theWshop);
126 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(theWshop);
127 XGUI_Workshop* aWorkshop = aConnector->workshop();
129 ModuleBase_IViewer* aViewer = theWshop->viewer();
130 connect(aViewer, SIGNAL(keyRelease(ModuleBase_IViewWindow*, QKeyEvent*)),
131 this, SLOT(onKeyRelease(ModuleBase_IViewWindow*, QKeyEvent*)));
132 connect(aViewer, SIGNAL(viewTransformed(int)),
133 SLOT(onViewTransformed(int)));
134 connect(aViewer, SIGNAL(viewCreated(ModuleBase_IViewWindow*)),
135 SLOT(onViewCreated(ModuleBase_IViewWindow*)));
136 myMenuMgr = new PartSet_MenuMgr(this);
137 myCustomPrs = new PartSet_CustomPrs(theWshop);
139 myOverconstraintListener = new PartSet_OverconstraintListener(theWshop);
141 Events_Loop* aLoop = Events_Loop::loop();
142 aLoop->registerListener(this, Events_Loop::eventByName(EVENT_DOCUMENT_CHANGED));
144 mySelectionFilters.Append(new PartSet_GlobalFilter(myWorkshop));
145 mySelectionFilters.Append(new PartSet_FilterInfinite(myWorkshop));
147 myHasConstraintShown[PartSet_Tools::Geometrical] = true;
148 myHasConstraintShown[PartSet_Tools::Dimensional] = true;
149 myHasConstraintShown[PartSet_Tools::Expressions] = false;
151 Config_PropManager::registerProp("Visualization", "operation_parameter_color",
152 "Reference shape wireframe color in operation", Config_Prop::Color,
153 PartSet_CustomPrs::OPERATION_PARAMETER_COLOR());
154 Config_PropManager::registerProp("Visualization", "operation_result_color",
155 "Result shape wireframe color in operation", Config_Prop::Color,
156 PartSet_CustomPrs::OPERATION_RESULT_COLOR());
157 Config_PropManager::registerProp("Visualization", "operation_highlight_color",
158 "Multi selector item color in operation", Config_Prop::Color,
159 PartSet_CustomPrs::OPERATION_HIGHLIGHT_COLOR());
162 PartSet_Module::~PartSet_Module()
164 SelectMgr_ListIteratorOfListOfFilter aIt(mySelectionFilters);
165 for (; aIt.More(); aIt.Next()) {
166 Handle(SelectMgr_Filter) aFilter = aIt.Value();
167 if (!aFilter.IsNull())
171 delete myOverconstraintListener;
174 void PartSet_Module::activateSelectionFilters()
176 SelectMgr_ListIteratorOfListOfFilter aIt(mySelectionFilters);
177 for (; aIt.More(); aIt.Next()) {
178 Handle(SelectMgr_Filter) aFilter = aIt.Value();
179 if (!aFilter.IsNull())
180 myWorkshop->viewer()->addSelectionFilter(aFilter);
184 void PartSet_Module::deactivateSelectionFilters()
186 SelectMgr_ListIteratorOfListOfFilter aIt(mySelectionFilters);
187 for (; aIt.More(); aIt.Next()) {
188 Handle(SelectMgr_Filter) aFilter = aIt.Value();
189 if (!aFilter.IsNull())
190 myWorkshop->viewer()->removeSelectionFilter(aFilter);
194 void PartSet_Module::storeSelection()
196 sketchMgr()->storeSelection();
199 void PartSet_Module::restoreSelection()
201 sketchMgr()->restoreSelection();
204 void PartSet_Module::registerValidators()
206 //Registering of validators
207 SessionPtr aMgr = ModelAPI_Session::get();
208 ModelAPI_ValidatorsFactory* aFactory = aMgr->validators();
209 aFactory->registerValidator("PartSet_DistanceSelection", new PartSet_DistanceSelection);
210 aFactory->registerValidator("PartSet_LengthSelection", new PartSet_LengthSelection);
211 aFactory->registerValidator("PartSet_PerpendicularSelection", new PartSet_PerpendicularSelection);
212 aFactory->registerValidator("PartSet_ParallelSelection", new PartSet_ParallelSelection);
213 aFactory->registerValidator("PartSet_RadiusSelection", new PartSet_RadiusSelection);
214 aFactory->registerValidator("PartSet_RigidSelection", new PartSet_RigidSelection);
215 aFactory->registerValidator("PartSet_CoincidentSelection", new PartSet_CoincidentSelection);
216 aFactory->registerValidator("PartSet_HVDirSelection", new PartSet_HVDirSelection);
217 aFactory->registerValidator("PartSet_TangentSelection", new PartSet_TangentSelection);
218 aFactory->registerValidator("PartSet_FilletSelection", new PartSet_FilletSelection);
219 aFactory->registerValidator("PartSet_AngleSelection", new PartSet_AngleSelection);
220 aFactory->registerValidator("PartSet_EqualSelection", new PartSet_EqualSelection);
221 aFactory->registerValidator("PartSet_CollinearSelection", new PartSet_CollinearSelection);
222 aFactory->registerValidator("PartSet_MiddlePointSelection", new PartSet_MiddlePointSelection);
223 aFactory->registerValidator("PartSet_DifferentObjects", new PartSet_DifferentObjectsValidator);
224 aFactory->registerValidator("PartSet_CoincidentAttr", new PartSet_CoincidentAttr);
227 void PartSet_Module::registerFilters()
229 //Registering of selection filters
230 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
231 ModuleBase_FilterFactory* aFactory = aConnector->selectionFilters();
234 void PartSet_Module::registerProperties()
236 Config_PropManager::registerProp("Sketch planes", "planes_size", "Size", Config_Prop::Double,
238 Config_PropManager::registerProp("Sketch planes", "planes_thickness", "Thickness",
239 Config_Prop::Integer, SKETCH_WIDTH);
240 Config_PropManager::registerProp("Sketch planes", "rotate_to_plane", "Rotate to plane when selected",
241 Config_Prop::Boolean, "false");
244 void PartSet_Module::connectToPropertyPanel(ModuleBase_ModelWidget* theWidget, const bool isToConnect)
246 mySketchMgr->connectToPropertyPanel(theWidget, isToConnect);
249 void PartSet_Module::operationCommitted(ModuleBase_Operation* theOperation)
251 if (PartSet_SketcherMgr::isNestedSketchOperation(theOperation)) {
252 mySketchMgr->commitNestedSketch(theOperation);
255 /// Restart sketcher operations automatically
256 if (!mySketchReentrantMgr->operationCommitted(theOperation)) {
258 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>(theOperation);
259 if (aFOperation && !aFOperation->isEditOperation()) {
260 // the selection is cleared after commit the create operation
261 // in order to do not use the same selected objects in the restarted operation
262 // for common behaviour, the selection is cleared even if the operation is not restarted
263 getWorkshop()->selector()->clearSelection();
268 void PartSet_Module::operationAborted(ModuleBase_Operation* theOperation)
270 /// Restart sketcher operations automatically
271 mySketchReentrantMgr->operationAborted(theOperation);
274 void PartSet_Module::operationStarted(ModuleBase_Operation* theOperation)
276 ModuleBase_IWorkshop* anIWorkshop = workshop();
277 if (!theOperation->getDescription()->hasXmlRepresentation()) { //!< No need for property panel
278 anIWorkshop->updateCommandStatus();
281 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>
284 XGUI_Workshop* aWorkshop = XGUI_Tools::workshop(anIWorkshop);
285 XGUI_PropertyPanel* aPropertyPanel = aWorkshop->propertyPanel();
286 ModuleBase_ModelWidget* aFilledWidget = 0;
287 bool aPostonedWidgetActivation = false;
288 FeaturePtr aFeature = aFOperation->feature();
290 std::string aGreedAttributeId = ModuleBase_Tools::findGreedAttribute(anIWorkshop, aFeature);
291 // if there is a greed attribute, automatic commit by preselection for this feature is prohibited
292 aWorkshop->setPropertyPanel(aFOperation);
294 // filling the operation values by the current selection
295 // if the operation can be committed after the controls filling, the method perform should
296 // be stopped. Otherwise unnecessary presentations can be shown(e.g. operation prs in sketch)
297 bool isOperationCommitted = false;
298 if (!aFOperation->isEditOperation()) {
299 aFilledWidget = aFOperation->activateByPreselection(aGreedAttributeId);
300 if (currentOperation() != aFOperation)
301 isOperationCommitted = true;
303 if (aGreedAttributeId.empty()) {
304 // a signal should be emitted before the next widget activation
305 // because, the activation of the next widget will give a focus to the widget. As a result
306 // the value of the widget is initialized. And commit may happens until the value is entered.
308 if (mySketchReentrantMgr->canBeCommittedByPreselection())
309 isOperationCommitted = mySketchMgr->operationActivatedByPreselection();
310 // activate the next obligatory widget
311 if (!isOperationCommitted)
312 aPropertyPanel->activateNextWidget(aFilledWidget);
315 else { // there is a greed widget
316 const QList<ModuleBase_ModelWidget*>& aWidgets = aPropertyPanel->modelWidgets();
317 std::string aFirstAttributeId = aWidgets.front()->attributeID();
318 // activate next widget after greeded if it is the first widget in the panel
319 // else the first panel widget is already activated by operation start
320 if (aFirstAttributeId == aGreedAttributeId)
321 aPostonedWidgetActivation = true;
324 } if (!isOperationCommitted) {
325 anIWorkshop->updateCommandStatus();
326 aWorkshop->connectToPropertyPanel(true);
327 operationStartedInternal(aFOperation);
329 // the objects of the current operation should be deactivated
330 QObjectPtrList anObjects;
331 anObjects.append(aFeature);
332 std::list<ResultPtr> aResults = aFeature->results();
333 std::list<ResultPtr>::const_iterator aIt;
334 for (aIt = aResults.begin(); aIt != aResults.end(); ++aIt) {
335 anObjects.append(*aIt);
337 QObjectPtrList::const_iterator anIt = anObjects.begin(), aLast = anObjects.end();
338 for (; anIt != aLast; anIt++)
339 aWorkshop->deactivateActiveObject(*anIt, false);
340 if (anObjects.size() > 0) {
341 XGUI_Displayer* aDisplayer = aWorkshop->displayer();
342 aDisplayer->updateViewer();
345 if (aPostonedWidgetActivation) {
346 // if the widget is an empty in the chain of activated widgets, the current operation
347 // is restarted. It should be performed after functionality of the operation starting
348 aPropertyPanel->activateNextWidget(aFilledWidget);
354 void PartSet_Module::operationStartedInternal(ModuleBase_Operation* theOperation)
356 /// Restart sketcher operations automatically
357 mySketchReentrantMgr->operationStarted(theOperation);
359 if (PartSet_SketcherMgr::isSketchOperation(theOperation)) {
360 mySketchMgr->startSketch(theOperation);
362 else if (PartSet_SketcherMgr::isNestedSketchOperation(theOperation)) {
363 mySketchMgr->startNestedSketch(theOperation);
366 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>(theOperation);
368 myCustomPrs->activate(aFOperation->feature(), ModuleBase_IModule::CustomizeArguments, true);
369 myCustomPrs->activate(aFOperation->feature(), ModuleBase_IModule::CustomizeResults, true);
373 void PartSet_Module::operationResumed(ModuleBase_Operation* theOperation)
375 ModuleBase_IModule::operationResumed(theOperation);
377 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>(theOperation);
379 myCustomPrs->activate(aFOperation->feature(), ModuleBase_IModule::CustomizeArguments, true);
380 myCustomPrs->activate(aFOperation->feature(), ModuleBase_IModule::CustomizeResults, true);
384 void PartSet_Module::operationStopped(ModuleBase_Operation* theOperation)
386 bool isModifiedArgs = myCustomPrs->deactivate(ModuleBase_IModule::CustomizeArguments, false);
387 bool isModifiedResults = myCustomPrs->deactivate(ModuleBase_IModule::CustomizeResults, false);
388 bool isModified = isModifiedArgs || isModifiedResults;
390 if (PartSet_SketcherMgr::isNestedSketchOperation(theOperation)) {
391 mySketchMgr->stopNestedSketch(theOperation);
394 //VSV: Viewer is updated on feature update and redisplay
396 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(myWorkshop);
397 XGUI_Displayer* aDisplayer = aConnector->workshop()->displayer();
398 aDisplayer->updateViewer();
401 QMap<PartSet_Tools::ConstraintVisibleState, bool>::const_iterator anIt = myHasConstraintShown.begin(),
402 aLast = myHasConstraintShown.end();
403 for (; anIt != aLast; anIt++) {
404 myHasConstraintShown[anIt.key()];
405 mySketchMgr->updateBySketchParameters(anIt.key(), anIt.value());
409 ModuleBase_Operation* PartSet_Module::currentOperation() const
411 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
412 XGUI_OperationMgr* anOpMgr = aConnector->workshop()->operationMgr();
413 return anOpMgr->currentOperation();
416 bool PartSet_Module::canUndo() const
418 bool aCanUndo = false;
419 SessionPtr aMgr = ModelAPI_Session::get();
420 if (aMgr->hasModuleDocument() && aMgr->canUndo()) {
421 aCanUndo = !aMgr->isOperation();
422 if (!aCanUndo) // check the enable state additionally by sketch manager
423 aCanUndo = aMgr->canUndo();
428 bool PartSet_Module::canRedo() const
430 bool aCanRedo = false;
431 SessionPtr aMgr = ModelAPI_Session::get();
432 if (aMgr->hasModuleDocument() && aMgr->canRedo()) {
433 aCanRedo = !aMgr->isOperation();
434 if (!aCanRedo) // check the enable state additionally by sketch manager
435 aCanRedo = aMgr->canRedo();
440 bool PartSet_Module::canApplyAction(const ObjectPtr& theObject, const QString& theActionId) const
443 if (theActionId == "MOVE_CMD") {
444 FeaturePtr aFeature = ModelAPI_Feature::feature(theObject);
446 // part features can not be moved in the history.
447 if (aFeature->getKind() == PartSetPlugin_Part::ID())
454 bool PartSet_Module::canEraseObject(const ObjectPtr& theObject) const
456 // the sketch manager put the restriction to the objects erase
457 return mySketchMgr->canEraseObject(theObject);
460 bool PartSet_Module::canDisplayObject(const ObjectPtr& theObject) const
462 // the sketch manager put the restriction to the objects display
463 return mySketchMgr->canDisplayObject(theObject);
466 void PartSet_Module::processHiddenObject(const std::list<ObjectPtr>& theObjects)
468 mySketchMgr->processHiddenObject(theObjects);
471 bool PartSet_Module::canActivateSelection(const ObjectPtr& theObject) const
473 bool aCanActivate = ModuleBase_IModule::canActivateSelection(theObject);
475 ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
476 bool isSketchOp = PartSet_SketcherMgr::isSketchOperation(anOperation),
477 isNestedOp = PartSet_SketcherMgr::isNestedSketchOperation(anOperation);
478 if (isSketchOp || isNestedOp) {
479 // in active sketch operation it is possible to activate operation object in selection
480 // in the edit operation, e.g. points of the line can be moved when the line is edited
481 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>(anOperation);
482 aCanActivate = aCanActivate || (aFOperation && aFOperation->isEditOperation());
487 bool PartSet_Module::addViewerMenu(QMenu* theMenu, const QMap<QString, QAction*>& theStdActions) const
489 return myMenuMgr->addViewerMenu(theMenu, theStdActions);
492 void PartSet_Module::updateViewerMenu(const QMap<QString, QAction*>& theStdActions)
494 myMenuMgr->updateViewerMenu(theStdActions);
497 QString PartSet_Module::getFeatureError(const FeaturePtr& theFeature)
499 QString anError = ModuleBase_IModule::getFeatureError(theFeature);
500 if (anError.isEmpty())
501 anError = sketchMgr()->getFeatureError(theFeature);
506 void PartSet_Module::grantedOperationIds(ModuleBase_Operation* theOperation,
507 QStringList& theIds) const
509 myMenuMgr->grantedOperationIds(theOperation, theIds);
511 if (PartSet_SketcherMgr::isSketchOperation(theOperation)) {
512 XGUI_Workshop* aWorkshop = getWorkshop();
513 theIds.append(aWorkshop->contextMenuMgr()->action("DELETE_CMD")->text());
517 void PartSet_Module::activeSelectionModes(QIntList& theModes)
520 if (mySketchMgr->activeSketch().get())
521 PartSet_SketcherMgr::sketchSelectionModes(theModes);
524 bool PartSet_Module::isMouseOverWindow()
526 return mySketchMgr->isMouseOverWindow();
529 void PartSet_Module::closeDocument()
534 void PartSet_Module::clearViewer()
536 myCustomPrs->clearPrs();
538 XGUI_Workshop* aWorkshop = getWorkshop();
539 XGUI_Displayer* aDisplayer = aWorkshop->displayer();
540 aDisplayer->deactivateSelectionFilters();
543 void PartSet_Module::propertyPanelDefined(ModuleBase_Operation* theOperation)
545 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>(theOperation);
549 ModuleBase_IPropertyPanel* aPanel = aFOperation->propertyPanel();
550 // we have to manually activate the sketch label in edit mode
551 if (PartSet_SketcherMgr::isSketchOperation(aFOperation) && (aFOperation->isEditOperation()))
552 aPanel->activateWidget(aPanel->modelWidgets().first());
555 bool PartSet_Module::createWidgets(ModuleBase_Operation* theOperation,
556 QList<ModuleBase_ModelWidget*>& theWidgets) const
558 bool aProcessed = false;
560 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>(theOperation);
561 XGUI_Workshop* aWorkshop = getWorkshop();
562 XGUI_PropertyPanel* aPropertyPanel = aWorkshop->propertyPanel();
563 if (mySketchMgr->activeSketch().get() && aFOperation && aPropertyPanel) {
564 ModuleBase_ISelection* aSelection = workshop()->selection();
565 // click on a point in sketch leads here with the point is highlighted, not yet selected
566 QList<ModuleBase_ViewerPrs> aPreselection = aSelection->getHighlighted();
567 if (aPreselection.size() == 1) {
568 ModuleBase_ViewerPrs aSelectedPrs = aPreselection[0];
569 ObjectPtr anObject = aSelectedPrs.object();
571 FeaturePtr aFeature = ModelAPI_Feature::feature(anObject);
572 FeaturePtr anOpFeature = aFOperation->feature();
573 GeomShapePtr aShape = aSelectedPrs.shape();
574 // click on the digit of dimension constrain comes here with an empty shape, so we need the check
575 if (aFeature == anOpFeature && aShape.get() && !aShape->isNull()) {
576 const TopoDS_Shape& aTDShape = aShape->impl<TopoDS_Shape>();
577 AttributePtr anAttribute = PartSet_Tools::findAttributeBy2dPoint(anObject, aTDShape,
578 mySketchMgr->activeSketch());
579 if (anAttribute.get()) {
580 QString aXmlRepr = aFOperation->getDescription()->xmlRepresentation();
581 ModuleBase_WidgetFactory aFactory(aXmlRepr.toStdString(), workshop());
583 const std::string anAttributeId = anAttribute->id();
584 aFactory.createWidget(aPropertyPanel->contentWidget(), anAttributeId);
586 theWidgets = aFactory.getModelWidgets();
587 // it is possible that the point does not present in XML definition,
588 // in this case, we assume that it is not processed by this module
589 // e.g. "Intersection point" feature
590 aProcessed = !theWidgets.isEmpty();
598 void PartSet_Module::onSelectionChanged()
600 ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
604 bool isSketcherOp = false;
605 // An edit operation is enable only if the current opeation is the sketch operation
606 if (mySketchMgr->activeSketch()) {
607 if (PartSet_Tools::sketchPlane(mySketchMgr->activeSketch()))
608 isSketcherOp = PartSet_SketcherMgr::isSketchOperation(aOperation);
611 // Editing of constraints can be done on selection
612 ModuleBase_ISelection* aSelect = myWorkshop->selection();
613 QList<ModuleBase_ViewerPrs> aSelected = aSelect->getSelected();
614 if (aSelected.size() == 1) {
615 ModuleBase_ViewerPrs aPrs = aSelected.first();
616 ObjectPtr aObject = aPrs.object();
617 FeaturePtr aFeature = ModelAPI_Feature::feature(aObject);
619 std::string aId = aFeature->getKind();
620 if ((aId == SketchPlugin_ConstraintRadius::ID()) ||
621 (aId == SketchPlugin_ConstraintLength::ID()) ||
622 (aId == SketchPlugin_ConstraintDistance::ID()) ||
623 (aId == SketchPlugin_ConstraintAngle::ID())) {
624 editFeature(aFeature);
631 void PartSet_Module::onKeyRelease(ModuleBase_IViewWindow* theWnd, QKeyEvent* theEvent)
633 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
634 XGUI_OperationMgr* anOpMgr = aConnector->workshop()->operationMgr();
635 anOpMgr->onKeyReleased(theWnd->viewPort(), theEvent);
638 ModuleBase_ModelWidget* PartSet_Module::createWidgetByType(const std::string& theType,
640 Config_WidgetAPI* theWidgetApi)
642 ModuleBase_IWorkshop* aWorkshop = workshop();
643 XGUI_Workshop* aXUIWorkshop = getWorkshop();
644 ModuleBase_ModelWidget* aWgt = NULL;
645 if (theType == "sketch-start-label") {
646 PartSet_WidgetSketchLabel* aLabelWgt = new PartSet_WidgetSketchLabel(theParent, aWorkshop,
647 theWidgetApi, myHasConstraintShown);
648 connect(aLabelWgt, SIGNAL(planeSelected(const std::shared_ptr<GeomAPI_Pln>&)),
649 mySketchMgr, SLOT(onPlaneSelected(const std::shared_ptr<GeomAPI_Pln>&)));
650 connect(aLabelWgt, SIGNAL(showConstraintToggled(int, bool)),
651 mySketchMgr, SLOT(onShowConstraintsToggle(int, bool)));
653 } else if (theType == "sketch-2dpoint_selector") {
654 PartSet_WidgetPoint2D* aPointWgt = new PartSet_WidgetPoint2D(theParent, aWorkshop,
656 aPointWgt->setSketch(mySketchMgr->activeSketch());
657 connect(aPointWgt, SIGNAL(vertexSelected()), sketchReentranceMgr(), SLOT(onVertexSelected()));
659 }else if (theType == "sketch-2dpoint_flyout_selector") {
660 PartSet_WidgetPoint2DFlyout* aPointWgt = new PartSet_WidgetPoint2DFlyout(theParent, aWorkshop,
662 aPointWgt->setSketch(mySketchMgr->activeSketch());
663 connect(aPointWgt, SIGNAL(vertexSelected()), sketchReentranceMgr(), SLOT(onVertexSelected()));
665 } else if (theType == "point2ddistance") {
666 PartSet_WidgetPoint2dDistance* aDistanceWgt = new PartSet_WidgetPoint2dDistance(theParent,
667 aWorkshop, theWidgetApi);
668 aDistanceWgt->setSketch(mySketchMgr->activeSketch());
670 } else if (theType == "sketch_shape_selector") {
671 PartSet_WidgetShapeSelector* aShapeSelectorWgt =
672 new PartSet_WidgetShapeSelector(theParent, aWorkshop, theWidgetApi);
673 aShapeSelectorWgt->setSketcher(mySketchMgr->activeSketch());
674 aWgt = aShapeSelectorWgt;
675 } else if (theType == "sketch_multi_selector") {
676 PartSet_WidgetMultiSelector* aShapeSelectorWgt =
677 new PartSet_WidgetMultiSelector(theParent, aWorkshop, theWidgetApi);
678 aShapeSelectorWgt->setSketcher(mySketchMgr->activeSketch());
679 aWgt = aShapeSelectorWgt;
680 } else if (theType == "composite_multi_selector") {
681 PartSet_WidgetMultiSelectorComposite* aShapeSelectorWgt =
682 new PartSet_WidgetMultiSelectorComposite(theParent, aWorkshop, theWidgetApi);
683 aWgt = aShapeSelectorWgt;
685 else if (theType == WDG_DOUBLEVALUE_EDITOR) {
686 aWgt = new PartSet_WidgetEditor(theParent, aWorkshop, theWidgetApi);
687 } else if (theType == "export_file_selector") {
688 aWgt = new PartSet_WidgetFileSelector(theParent, aWorkshop, theWidgetApi);
689 } else if (theType == "sketch_launcher") {
690 aWgt = new PartSet_WidgetSketchCreator(theParent, this, theWidgetApi);
691 } else if (theType == "module_choice") {
692 aWgt = new PartSet_WidgetChoice(theParent, theWidgetApi);
693 connect(aWgt, SIGNAL(itemSelected(ModuleBase_ModelWidget*, int)),
694 this, SLOT(onChoiceChanged(ModuleBase_ModelWidget*, int)));
699 ModuleBase_ModelWidget* PartSet_Module::activeWidget() const
701 ModuleBase_ModelWidget* anActiveWidget = 0;
703 anActiveWidget = mySketchReentrantMgr->internalActiveWidget();
704 if (!anActiveWidget) {
705 ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
707 ModuleBase_IPropertyPanel* aPanel = aOperation->propertyPanel();
708 anActiveWidget = aPanel->activeWidget();
711 return anActiveWidget;
714 bool PartSet_Module::deleteObjects()
716 bool isProcessed = false;
718 XGUI_Workshop* aWorkshop = getWorkshop();
719 XGUI_OperationMgr* anOpMgr = aWorkshop->operationMgr();
721 //SessionPtr aMgr = ModelAPI_Session::get();
722 // 1. check whether the delete should be processed in the module
723 ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
724 bool isSketchOp = PartSet_SketcherMgr::isSketchOperation(anOperation),
725 isNestedOp = PartSet_SketcherMgr::isNestedSketchOperation(anOperation);
726 if (isSketchOp || isNestedOp) {
728 // 2. find selected presentations
729 // selected objects should be collected before the current operation abort because
730 // the abort leads to selection lost on constraint objects. It can be corrected after #386 issue
731 ModuleBase_ISelection* aSel = workshop()->selection();
732 QObjectPtrList aSelectedObj = aSel->selectedPresentations();
733 // if there are no selected objects in the viewer, that means that the selection in another
734 // place cased this method. It is necessary to return the false value to understande in above
735 // method that delete is not processed
736 if (aSelectedObj.count() == 0)
739 // avoid delete of the objects, which are not belong to the current sketch
740 // in order to do not delete results of other sketches
741 QObjectPtrList aSketchObjects;
742 QObjectPtrList::const_iterator anIt = aSelectedObj.begin(), aLast = aSelectedObj.end();
743 for ( ; anIt != aLast; anIt++) {
744 ObjectPtr anObject = *anIt;
745 if (mySketchMgr->isObjectOfSketch(anObject)) {
746 // sketch feature should be used in this list because workshop deletes features only
747 // results are skipped
748 FeaturePtr aSketchFeature = ModelAPI_Feature::feature(anObject);
749 aSketchObjects.append(aSketchFeature);
752 // if the selection contains only local selected presentations from other sketches,
753 // the Delete operation should not be done at all
754 if (aSketchObjects.size() == 0)
757 // 3. start operation
758 QString aDescription = aWorkshop->contextMenuMgr()->action("DELETE_CMD")->text();
759 ModuleBase_OperationAction* anOpAction = new ModuleBase_OperationAction(aDescription, this);
761 // the active nested sketch operation should be aborted unconditionally
762 // the Delete action should be additionally granted for the Sketch operation
763 // in order to do not abort/commit it
764 if (!anOpMgr->canStartOperation(anOpAction->id()))
765 return true; // the objects are processed but can not be deleted
767 anOpMgr->startOperation(anOpAction);
769 // 4. delete features
770 // sketch feature should be skipped, only sub-features can be removed
771 // when sketch operation is active
772 aWorkshop->deleteFeatures(aSketchObjects);
774 anOpMgr->commitOperation();
779 void PartSet_Module::onFeatureTriggered()
781 QAction* aCmd = dynamic_cast<QAction*>(sender());
782 if (aCmd->isCheckable() && aCmd->isChecked()) {
783 // 1. check whether the delete should be processed in the module
784 ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
785 bool isNestedOp = PartSet_SketcherMgr::isNestedCreateOperation(anOperation);
787 // in case if in the viewer nothing is displayed, the create operation should not be
788 // comitted even if all values of the feature are initialized
789 if (!mySketchMgr->canDisplayCurrentCreatedFeature()) {
790 // the action information should be saved before the operation is aborted
791 // because this abort leads to update command status, which unchecks this action
792 anOperation->abort();
793 launchOperation(aCmd->data().toString());
797 ModuleBase_IModule::onFeatureTriggered();
800 void PartSet_Module::editFeature(FeaturePtr theFeature)
802 storeConstraintsState(theFeature->getKind());
803 ModuleBase_IModule::editFeature(theFeature);
806 void PartSet_Module::launchOperation(const QString& theCmdId)
808 storeConstraintsState(theCmdId.toStdString());
809 ModuleBase_IModule::launchOperation(theCmdId);
812 void PartSet_Module::storeConstraintsState(const std::string& theFeatureKind)
814 if (myWorkshop->currentOperation() &&
815 myWorkshop->currentOperation()->id().toStdString() == SketchPlugin_Sketch::ID()) {
816 const QMap<PartSet_Tools::ConstraintVisibleState, bool>& aShownStates =
817 mySketchMgr->showConstraintStates();
818 myHasConstraintShown = aShownStates;
820 if (PartSet_SketcherMgr::constraintsIdList().contains(theFeatureKind.c_str())) {
821 // Show constraints if a constraint was anOperation
822 mySketchMgr->updateBySketchParameters(PartSet_Tools::Geometrical, true);
823 mySketchMgr->updateBySketchParameters(PartSet_Tools::Dimensional, true);
824 mySketchMgr->updateBySketchParameters(PartSet_Tools::Expressions,
825 myHasConstraintShown[PartSet_Tools::Expressions]);
829 void PartSet_Module::onObjectDisplayed(ObjectPtr theObject, AISObjectPtr theAIS)
831 Handle(AIS_InteractiveObject) anAIS = theAIS->impl<Handle(AIS_InteractiveObject)>();
832 if (!anAIS.IsNull()) {
833 Handle(AIS_InteractiveContext) aCtx = anAIS->GetContext();
834 Handle(AIS_Dimension) aDim = Handle(AIS_Dimension)::DownCast(anAIS);
835 if (!aDim.IsNull()) {
836 aCtx->SetZLayer(aDim, myVisualLayerId);
838 Handle(SketcherPrs_SymbolPrs) aCons = Handle(SketcherPrs_SymbolPrs)::DownCast(anAIS);
840 aCtx->SetZLayer(aCons, myVisualLayerId);
845 void PartSet_Module::onBeforeObjectErase(ObjectPtr theObject, AISObjectPtr theAIS)
848 // it should be recomputed in order to disappear in the viewer if the corresponded object
850 //if (myCustomPrs->isActive())
851 // myCustomPrs->redisplay(theObject, false);
854 void PartSet_Module::onViewTransformed(int theTrsfType)
856 // Set length of arrows constant in pixel size
857 // if the operation is panning or rotate or panglobal then do nothing
858 if ((theTrsfType == 1) || (theTrsfType == 3) || (theTrsfType == 4))
860 ModuleBase_IViewer* aViewer = myWorkshop->viewer();
861 Handle(AIS_InteractiveContext) aContext = aViewer->AISContext();
862 if (aContext.IsNull())
865 //Handle(V3d_View) aView = aViewer->activeView();
867 XGUI_Workshop* aWorkshop = getWorkshop();
868 XGUI_Displayer* aDisplayer = aWorkshop->displayer();
869 Handle(V3d_Viewer) aV3dViewer = aContext->CurrentViewer();
870 Handle(V3d_View) aView;
872 for (aV3dViewer->InitDefinedViews();
873 aV3dViewer->MoreDefinedViews();
874 aV3dViewer->NextDefinedViews()) {
875 Handle(V3d_View) aV = aV3dViewer->DefinedView();
876 double aS = aV->Scale();
884 double aLen = aView->Convert(SketcherPrs_Tools::getDefaultArrowSize());
886 double aPrevLen = SketcherPrs_Tools::getArrowSize();
887 SketcherPrs_Tools::setArrowSize(aLen);
888 const double aPrevScale = aViewer->Scale(aViewer->activeView());
889 const double aCurScale = aViewer->activeView()->Camera()->Scale();
890 aViewer->SetScale(aViewer->activeView(), aCurScale);
891 SketcherPrs_Tools::setTextHeight (aCurScale / aPrevScale * SketcherPrs_Tools::getTextHeight());
892 bool isModified = false;
893 QList<AISObjectPtr> aPrsList = aDisplayer->displayedPresentations();
894 foreach (AISObjectPtr aAIS, aPrsList) {
895 Handle(AIS_InteractiveObject) aAisObj = aAIS->impl<Handle(AIS_InteractiveObject)>();
897 Handle(AIS_Dimension) aDim = Handle(AIS_Dimension)::DownCast(aAisObj);
898 if (!aDim.IsNull()) {
899 aDim->DimensionAspect()->ArrowAspect()->SetLength(aLen);
900 aContext->Redisplay(aDim, false);
905 aDisplayer->updateViewer();
908 void PartSet_Module::activateCustomPrs(const FeaturePtr& theFeature, const ModuleBase_CustomizeFlag& theFlag,
909 const bool theUpdateViewer)
911 myCustomPrs->activate(theFeature, theFlag, theUpdateViewer);
914 void PartSet_Module::deactivateCustomPrs(const ModuleBase_CustomizeFlag& theFlag,
915 const bool theUpdateViewer)
917 myCustomPrs->deactivate(theFlag, theUpdateViewer);
920 bool PartSet_Module::customisePresentation(ResultPtr theResult, AISObjectPtr thePrs,
921 std::shared_ptr<GeomAPI_ICustomPrs> theCustomPrs)
923 bool aCustomized = false;
928 XGUI_Workshop* aWorkshop = getWorkshop();
929 XGUI_Displayer* aDisplayer = aWorkshop->displayer();
930 ObjectPtr anObject = aDisplayer->getObject(thePrs);
931 if (anObject.get()) {
932 bool isConflicting = myOverconstraintListener->isConflictingObject(anObject);
933 // customize sketch symbol presentation
935 Handle(AIS_InteractiveObject) anAISIO = thePrs->impl<Handle(AIS_InteractiveObject)>();
936 if (!anAISIO.IsNull()) {
937 if (!Handle(SketcherPrs_SymbolPrs)::DownCast(anAISIO).IsNull()) {
938 Handle(SketcherPrs_SymbolPrs) aPrs = Handle(SketcherPrs_SymbolPrs)::DownCast(anAISIO);
939 if (!aPrs.IsNull()) {
940 std::vector<int> aColor;
941 myOverconstraintListener->getConflictingColor(aColor);
942 aPrs->SetConflictingConstraint(isConflicting, aColor);
948 // customize sketch dimension constraint presentation
950 std::vector<int> aColor;
952 myOverconstraintListener->getConflictingColor(aColor);
955 XGUI_CustomPrs::getDefaultColor(anObject, true, aColor);
956 if (!aColor.empty()) {
957 thePrs->setColor(aColor[0], aColor[1], aColor[2]);
962 // customize dimentional constrains
963 sketchMgr()->customizePresentation(anObject);
969 bool PartSet_Module::customizeObject(ObjectPtr theObject, const ModuleBase_CustomizeFlag& theFlag,
970 const bool theUpdateViewer)
972 bool isRedisplayed = false;
973 if (myCustomPrs->isActive(theFlag))
974 isRedisplayed = myCustomPrs->redisplay(theObject, theFlag, theUpdateViewer);
976 return isRedisplayed;
979 void PartSet_Module::customizeObjectBrowser(QWidget* theObjectBrowser)
981 XGUI_ObjectsBrowser* aOB = dynamic_cast<XGUI_ObjectsBrowser*>(theObjectBrowser);
983 QLabel* aLabel = aOB->activeDocLabel();
984 aLabel->installEventFilter(myMenuMgr);
985 connect(aLabel, SIGNAL(customContextMenuRequested(const QPoint&)),
986 SLOT(onActiveDocPopup(const QPoint&)));
987 //QPalette aPalet = aLabel->palette();
988 //aPalet.setColor(QPalette::Text, QColor(0, 72, 140));
989 //aLabel->setPalette(aPalet);
990 aOB->treeView()->setExpandsOnDoubleClick(false);
991 connect(aOB->treeView(), SIGNAL(doubleClicked(const QModelIndex&)),
992 SLOT(onTreeViewDoubleClick(const QModelIndex&)));
996 void PartSet_Module::onActiveDocPopup(const QPoint& thePnt)
998 SessionPtr aMgr = ModelAPI_Session::get();
999 QAction* aActivatePartAction = myMenuMgr->action("ACTIVATE_PARTSET_CMD");
1001 XGUI_Workshop* aWorkshop = getWorkshop();
1002 QLabel* aHeader = aWorkshop->objectBrowser()->activeDocLabel();
1004 aActivatePartAction->setEnabled((aMgr->activeDocument() != aMgr->moduleDocument()));
1007 aMenu.addAction(aActivatePartAction);
1008 aMenu.exec(aHeader->mapToGlobal(thePnt));
1012 ObjectPtr PartSet_Module::findPresentedObject(const AISObjectPtr& theAIS) const
1015 ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
1017 /// If last line finished on vertex the lines creation sequence has to be break
1018 ModuleBase_IPropertyPanel* aPanel = aOperation->propertyPanel();
1020 ModuleBase_ModelWidget* anActiveWidget = aPanel->activeWidget();
1021 // if there is an active widget, find the presented object in it
1022 if (!anActiveWidget)
1023 anActiveWidget = aPanel->preselectionWidget();
1025 ModuleBase_WidgetValidated* aWidgetValidated = dynamic_cast<ModuleBase_WidgetValidated*>
1027 if (aWidgetValidated)
1028 anObject = aWidgetValidated->findPresentedObject(theAIS);
1034 void PartSet_Module::addObjectBrowserMenu(QMenu* theMenu) const
1036 QObjectPtrList aObjects = myWorkshop->selection()->selectedObjects();
1037 int aSelected = aObjects.size();
1038 SessionPtr aMgr = ModelAPI_Session::get();
1039 QAction* aActivatePartAction = myMenuMgr->action("ACTIVATE_PART_CMD");
1041 ModuleBase_Operation* aCurrentOp = myWorkshop->currentOperation();
1042 if (aSelected == 1) {
1043 bool hasResult = false;
1044 bool hasFeature = false;
1045 bool hasParameter = false;
1046 bool hasSubFeature = false;
1047 ModuleBase_Tools::checkObjects(aObjects, hasResult, hasFeature, hasParameter, hasSubFeature);
1049 ObjectPtr aObject = aObjects.first();
1051 ResultPartPtr aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aObject);
1052 FeaturePtr aFeature = std::dynamic_pointer_cast<ModelAPI_Feature>(aObject);
1053 bool isPart = aPart.get() ||
1054 (aFeature.get() && (aFeature->getKind() == PartSetPlugin_Part::ID()));
1056 DocumentPtr aPartDoc;
1058 aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aFeature->firstResult());
1060 if (aPart.get()) // this may be null is Part feature is disabled
1061 aPartDoc = aPart->partDoc();
1063 theMenu->addAction(aActivatePartAction);
1064 aActivatePartAction->setEnabled((aMgr->activeDocument() != aPartDoc));
1066 } else if (aObject->document() == aMgr->activeDocument()) {
1067 if (hasParameter || hasFeature) {
1068 myMenuMgr->action("EDIT_CMD")->setEnabled(true);
1069 theMenu->addAction(myMenuMgr->action("EDIT_CMD"));
1070 if (aCurrentOp && aFeature.get()) {
1071 if (aCurrentOp->id().toStdString() == aFeature->getKind())
1072 myMenuMgr->action("EDIT_CMD")->setEnabled(false);
1077 ResultBodyPtr aResult = std::dynamic_pointer_cast<ModelAPI_ResultBody>(aObject);
1079 theMenu->addAction(myMenuMgr->action("SELECT_PARENT_CMD"));
1082 bool aNotDeactivate = (aCurrentOp == 0);
1083 if (!aNotDeactivate) {
1084 aActivatePartAction->setEnabled(false);
1088 void PartSet_Module::processEvent(const std::shared_ptr<Events_Message>& theMessage)
1090 if (theMessage->eventID() == Events_Loop::loop()->eventByName(EVENT_DOCUMENT_CHANGED)) {
1091 // Do not change activation of parts if an operation active
1092 static QStringList aAllowActivationList;
1093 if (aAllowActivationList.isEmpty())
1094 aAllowActivationList <<
1095 QString(PartSetPlugin_Part::ID().c_str()) <<
1096 QString(PartSetPlugin_Duplicate::ID().c_str()) <<
1097 QString(PartSetPlugin_Remove::ID().c_str());
1098 if (myWorkshop->currentOperation() &&
1099 (!aAllowActivationList.contains(myWorkshop->currentOperation()->id())))
1101 XGUI_Workshop* aWorkshop = getWorkshop();
1102 XGUI_DataTree* aTreeView = aWorkshop->objectBrowser()->treeView();
1103 QLabel* aLabel = aWorkshop->objectBrowser()->activeDocLabel();
1104 QPalette aPalet = aLabel->palette();
1106 SessionPtr aMgr = ModelAPI_Session::get();
1107 DocumentPtr aActiveDoc = aMgr->activeDocument();
1108 if (aActivePartIndex.isValid())
1109 aTreeView->setExpanded(aActivePartIndex, false);
1110 XGUI_DataModel* aDataModel = aWorkshop->objectBrowser()->dataModel();
1111 aActivePartIndex = aDataModel->documentRootIndex(aActiveDoc);
1112 if (aActivePartIndex.isValid())
1113 aTreeView->setExpanded(aActivePartIndex, true);
1115 aLabel->setPalette(aPalet);
1116 aWorkshop->updateCommandStatus();
1118 // Update displayed objects in order to update active color
1119 XGUI_Displayer* aDisplayer = aWorkshop->displayer();
1120 QObjectPtrList aObjects = aDisplayer->displayedObjects();
1122 foreach(ObjectPtr aObj, aObjects) {
1123 //TODO: replace by redisplay event.
1124 aHidden = !aObj->data() || !aObj->data()->isValid() ||
1125 aObj->isDisabled() || (!aObj->isDisplayed());
1127 aDisplayer->redisplay(aObj, false);
1129 aDisplayer->updateViewer();
1133 void PartSet_Module::onTreeViewDoubleClick(const QModelIndex& theIndex)
1135 if (myWorkshop->currentOperation()) // Do not change activation of parts if an operation active
1137 SessionPtr aMgr = ModelAPI_Session::get();
1138 if (!theIndex.isValid()) {
1139 aMgr->setActiveDocument(aMgr->moduleDocument());
1142 if (theIndex.column() != 0) // Use only first column
1145 XGUI_Workshop* aWorkshop = getWorkshop();
1146 XGUI_DataModel* aDataModel = aWorkshop->objectBrowser()->dataModel();
1147 // De not use non editable Indexes
1148 if ((aDataModel->flags(theIndex) & Qt::ItemIsSelectable) == 0)
1150 ObjectPtr aObj = aDataModel->object(theIndex);
1152 ResultPartPtr aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aObj);
1153 if (!aPart.get()) { // Probably this is Feature
1154 FeaturePtr aPartFeature = std::dynamic_pointer_cast<ModelAPI_Feature>(aObj);
1155 if (aPartFeature.get() && (aPartFeature->getKind() == PartSetPlugin_Part::ID())) {
1156 aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aPartFeature->firstResult());
1159 if (aPart.get()) { // if this is a part
1160 if (aPart->partDoc() == aMgr->activeDocument()) {
1161 myMenuMgr->activatePartSet();
1169 void PartSet_Module::onViewCreated(ModuleBase_IViewWindow*)
1171 // z layer is created for all started operations in order to visualize operation AIS presentation
1173 Handle(AIS_InteractiveContext) aContext = myWorkshop->viewer()->AISContext();
1174 if (aContext.IsNull())
1177 Handle(V3d_Viewer) aViewer = aContext->CurrentViewer();
1178 if (myVisualLayerId == 0) {
1179 if (myVisualLayerId == 0)
1180 aViewer->AddZLayer(myVisualLayerId);
1182 TColStd_SequenceOfInteger aZList;
1183 aViewer->GetAllZLayers(aZList);
1184 bool aFound = false;
1185 for (int i = 1; i <= aZList.Length(); i++) {
1186 if (aZList(i) == myVisualLayerId) {
1192 aViewer->AddZLayer(myVisualLayerId);
1194 // if there is an active operation with validated widget,
1195 // the filters of this widget should be activated in the created view
1196 ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
1198 ModuleBase_ModelWidget* anActiveWidget = activeWidget();
1199 if (anActiveWidget) {
1200 ModuleBase_WidgetSelector* aWSelector = dynamic_cast<ModuleBase_WidgetSelector*>(anActiveWidget);
1202 aWSelector->activateSelectionAndFilters(true);
1207 //******************************************************
1208 void PartSet_Module::widgetStateChanged(int thePreviousState)
1210 mySketchMgr->widgetStateChanged(thePreviousState);
1213 bool PartSet_Module::processEnter(const std::string& thePreviousAttributeID)
1215 return mySketchReentrantMgr->processEnter(thePreviousAttributeID);
1218 //******************************************************
1219 void PartSet_Module::beforeOperationStarted(ModuleBase_Operation* theOperation)
1223 //******************************************************
1224 void PartSet_Module::beforeOperationStopped(ModuleBase_Operation* theOperation)
1226 if (PartSet_SketcherMgr::isSketchOperation(theOperation)) {
1227 mySketchMgr->stopSketch(theOperation);
1231 //******************************************************
1232 GeomShapePtr PartSet_Module::findShape(const AttributePtr& theAttribute)
1234 GeomShapePtr aGeomShape;
1236 ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
1237 if (anOperation && PartSet_SketcherMgr::isNestedSketchOperation(anOperation)) {
1238 aGeomShape = PartSet_Tools::findShapeBy2DPoint(theAttribute, myWorkshop);
1243 //******************************************************
1244 AttributePtr PartSet_Module::findAttribute(const ObjectPtr& theObject,
1245 const GeomShapePtr& theGeomShape)
1247 AttributePtr anAttribute;
1248 GeomShapePtr aGeomShape = theGeomShape;
1249 if (!aGeomShape.get()) {
1250 // processing shape of result, e.g. sketch circle center is selected, this is a result
1251 // the geom shape is empty, the shape of result should be used
1252 ResultPtr aResult = std::dynamic_pointer_cast<ModelAPI_Result>(theObject);
1253 if (aResult.get()) {
1254 aGeomShape = aResult->shape();
1258 if (aGeomShape.get()) {
1259 TopoDS_Shape aTDSShape = aGeomShape->impl<TopoDS_Shape>();
1260 return PartSet_Tools::findAttributeBy2dPoint(theObject, aTDSShape,
1261 mySketchMgr->activeSketch());
1266 //******************************************************
1267 void PartSet_Module::onChoiceChanged(ModuleBase_ModelWidget* theWidget,
1270 PartSet_WidgetChoice* aChoiceWidget = dynamic_cast<PartSet_WidgetChoice*>(theWidget);
1274 QString aChoiceTitle = aChoiceWidget->getPropertyPanelTitle(theIndex);
1275 if (!aChoiceTitle.isEmpty()) {
1276 ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
1279 ModuleBase_IPropertyPanel* aPanel = aOperation->propertyPanel();
1280 aPanel->setWindowTitle(aChoiceTitle);
1284 //******************************************************
1285 XGUI_Workshop* PartSet_Module::getWorkshop() const
1287 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
1288 return aConnector->workshop();