1 // Copyright (C) 2014-20xx CEA/DEN, EDF R&D
3 #include "PartSet_Module.h"
4 #include "PartSet_WidgetSketchLabel.h"
5 #include "PartSet_Validators.h"
6 #include "PartSet_Tools.h"
7 #include "PartSet_PreviewPlanes.h"
8 #include "PartSet_WidgetPoint2d.h"
9 #include "PartSet_WidgetPoint2dDistance.h"
10 #include "PartSet_WidgetPoint2DFlyout.h"
11 #include "PartSet_WidgetShapeSelector.h"
12 #include "PartSet_WidgetMultiSelector.h"
13 #include "PartSet_WidgetEditor.h"
14 #include "PartSet_WidgetFileSelector.h"
15 #include "PartSet_WidgetSketchCreator.h"
16 #include "PartSet_SketcherMgr.h"
17 #include "PartSet_SketcherReetntrantMgr.h"
18 #include "PartSet_ResultSketchPrs.h"
19 #include "PartSet_MenuMgr.h"
20 #include "PartSet_CustomPrs.h"
21 #include "PartSet_IconFactory.h"
22 #include "PartSet_WidgetChoice.h"
23 #include "PartSet_OverconstraintListener.h"
25 #include "PartSet_Filters.h"
26 #include "PartSet_FilterInfinite.h"
28 #include <PartSetPlugin_Remove.h>
29 #include <PartSetPlugin_Part.h>
30 #include <PartSetPlugin_Duplicate.h>
32 #include <ModuleBase_Operation.h>
33 #include <ModuleBase_OperationAction.h>
34 #include <ModuleBase_IViewer.h>
35 #include <ModuleBase_IViewWindow.h>
36 #include <ModuleBase_IPropertyPanel.h>
37 #include <ModuleBase_WidgetEditor.h>
38 #include <ModuleBase_WidgetValidated.h>
39 #include <ModuleBase_FilterFactory.h>
40 #include <ModuleBase_Tools.h>
41 #include <ModuleBase_OperationFeature.h>
42 #include <ModuleBase_WidgetFactory.h>
43 #include <ModuleBase_OperationDescription.h>
44 #include <ModuleBase_ViewerPrs.h>
46 #include <ModelAPI_Object.h>
47 #include <ModelAPI_Events.h>
48 #include <ModelAPI_Validator.h>
49 #include <ModelAPI_Data.h>
50 #include <ModelAPI_Session.h>
51 #include <ModelAPI_ResultBody.h>
52 #include <ModelAPI_AttributeString.h>
53 #include <ModelAPI_AttributeSelectionList.h>
54 #include <ModelAPI_Tools.h>
56 #include <GeomDataAPI_Point2D.h>
57 #include <GeomDataAPI_Point.h>
58 #include <GeomDataAPI_Dir.h>
60 #include <XGUI_Displayer.h>
61 #include <XGUI_Workshop.h>
62 #include <XGUI_OperationMgr.h>
63 #include <XGUI_PropertyPanel.h>
64 #include <XGUI_ModuleConnector.h>
65 #include <XGUI_ContextMenuMgr.h>
66 #include <XGUI_Tools.h>
67 #include <XGUI_ObjectsBrowser.h>
68 #include <XGUI_SelectionMgr.h>
69 #include <XGUI_DataModel.h>
70 #include <XGUI_ErrorMgr.h>
71 #include <XGUI_CustomPrs.h>
72 #include <XGUI_SelectionMgr.h>
73 #include <XGUI_ActionsMgr.h>
75 #include <SketchPlugin_Feature.h>
76 #include <SketchPlugin_Sketch.h>
77 #include <SketchPlugin_ConstraintAngle.h>
78 #include <SketchPlugin_ConstraintLength.h>
79 #include <SketchPlugin_ConstraintDistance.h>
80 #include <SketchPlugin_ConstraintParallel.h>
81 #include <SketchPlugin_ConstraintPerpendicular.h>
82 #include <SketchPlugin_ConstraintRadius.h>
84 #include <SketcherPrs_SymbolPrs.h>
85 #include <SketcherPrs_Coincident.h>
86 #include <SketcherPrs_Tools.h>
88 #include <Events_Loop.h>
89 #include <Config_PropManager.h>
90 #include <Config_Keywords.h>
92 #include <StdSelect_TypeOfFace.hxx>
93 #include <TopoDS_Vertex.hxx>
95 #include <TopoDS_Shape.hxx>
96 #include <BRep_Tool.hxx>
97 #include <AIS_Dimension.hxx>
100 #include <QMouseEvent>
103 #include <QApplication>
104 #include <QMessageBox>
105 #include <QMainWindow>
109 #include <GeomAlgoAPI_FaceBuilder.h>
110 #include <GeomDataAPI_Dir.h>
112 #include <SelectMgr_ListIteratorOfListOfFilter.hxx>
118 /*!Create and return new instance of XGUI_Module*/
119 extern "C" PARTSET_EXPORT ModuleBase_IModule* createModule(ModuleBase_IWorkshop* theWshop)
121 return new PartSet_Module(theWshop);
124 PartSet_Module::PartSet_Module(ModuleBase_IWorkshop* theWshop)
125 : ModuleBase_IModule(theWshop),
127 myIsOperationIsLaunched(false)
129 new PartSet_IconFactory();
131 mySketchMgr = new PartSet_SketcherMgr(this);
132 mySketchReentrantMgr = new PartSet_SketcherReetntrantMgr(theWshop);
134 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(theWshop);
135 XGUI_Workshop* aWorkshop = aConnector->workshop();
137 ModuleBase_IViewer* aViewer = theWshop->viewer();
138 connect(aViewer, SIGNAL(keyRelease(ModuleBase_IViewWindow*, QKeyEvent*)),
139 this, SLOT(onKeyRelease(ModuleBase_IViewWindow*, QKeyEvent*)));
140 connect(aViewer, SIGNAL(viewTransformed(int)),
141 SLOT(onViewTransformed(int)));
142 connect(aViewer, SIGNAL(viewCreated(ModuleBase_IViewWindow*)),
143 SLOT(onViewCreated(ModuleBase_IViewWindow*)));
144 myMenuMgr = new PartSet_MenuMgr(this);
145 myCustomPrs = new PartSet_CustomPrs(theWshop);
147 myOverconstraintListener = new PartSet_OverconstraintListener(theWshop);
149 Events_Loop* aLoop = Events_Loop::loop();
150 aLoop->registerListener(this, Events_Loop::eventByName(EVENT_DOCUMENT_CHANGED));
152 mySelectionFilters.Append(new PartSet_GlobalFilter(myWorkshop));
153 mySelectionFilters.Append(new PartSet_FilterInfinite(myWorkshop));
155 setDefaultConstraintShown();
157 Config_PropManager::registerProp("Visualization", "operation_parameter_color",
158 "Reference shape wireframe color in operation", Config_Prop::Color,
159 PartSet_CustomPrs::OPERATION_PARAMETER_COLOR());
160 Config_PropManager::registerProp("Visualization", "operation_result_color",
161 "Result shape wireframe color in operation", Config_Prop::Color,
162 PartSet_CustomPrs::OPERATION_RESULT_COLOR());
163 Config_PropManager::registerProp("Visualization", "operation_highlight_color",
164 "Multi selector item color in operation", Config_Prop::Color,
165 PartSet_CustomPrs::OPERATION_HIGHLIGHT_COLOR());
168 Config_PropManager::registerProp("Sketch planes", "disable_input_fields", "Disable input fields",
169 Config_Prop::Boolean, "true");
172 PartSet_Module::~PartSet_Module()
174 SelectMgr_ListIteratorOfListOfFilter aIt(mySelectionFilters);
175 for (; aIt.More(); aIt.Next()) {
176 Handle(SelectMgr_Filter) aFilter = aIt.Value();
177 if (!aFilter.IsNull())
181 delete myOverconstraintListener;
184 void PartSet_Module::activateSelectionFilters()
186 SelectMgr_ListIteratorOfListOfFilter aIt(mySelectionFilters);
187 for (; aIt.More(); aIt.Next()) {
188 Handle(SelectMgr_Filter) aFilter = aIt.Value();
189 if (!aFilter.IsNull())
190 myWorkshop->viewer()->addSelectionFilter(aFilter);
194 void PartSet_Module::deactivateSelectionFilters()
196 SelectMgr_ListIteratorOfListOfFilter aIt(mySelectionFilters);
197 for (; aIt.More(); aIt.Next()) {
198 Handle(SelectMgr_Filter) aFilter = aIt.Value();
199 if (!aFilter.IsNull())
200 myWorkshop->viewer()->removeSelectionFilter(aFilter);
204 void PartSet_Module::storeSelection()
206 sketchMgr()->storeSelection();
209 void PartSet_Module::restoreSelection()
211 sketchMgr()->restoreSelection();
214 void PartSet_Module::registerValidators()
216 //Registering of validators
217 SessionPtr aMgr = ModelAPI_Session::get();
218 ModelAPI_ValidatorsFactory* aFactory = aMgr->validators();
219 aFactory->registerValidator("PartSet_DistanceSelection", new PartSet_DistanceSelection);
220 aFactory->registerValidator("PartSet_LengthSelection", new PartSet_LengthSelection);
221 aFactory->registerValidator("PartSet_PerpendicularSelection", new PartSet_PerpendicularSelection);
222 aFactory->registerValidator("PartSet_ParallelSelection", new PartSet_ParallelSelection);
223 aFactory->registerValidator("PartSet_RadiusSelection", new PartSet_RadiusSelection);
224 aFactory->registerValidator("PartSet_RigidSelection", new PartSet_RigidSelection);
225 aFactory->registerValidator("PartSet_CoincidentSelection", new PartSet_CoincidentSelection);
226 aFactory->registerValidator("PartSet_HVDirSelection", new PartSet_HVDirSelection);
227 aFactory->registerValidator("PartSet_TangentSelection", new PartSet_TangentSelection);
228 aFactory->registerValidator("PartSet_FilletSelection", new PartSet_FilletSelection);
229 aFactory->registerValidator("PartSet_AngleSelection", new PartSet_AngleSelection);
230 aFactory->registerValidator("PartSet_EqualSelection", new PartSet_EqualSelection);
231 aFactory->registerValidator("PartSet_CollinearSelection", new PartSet_CollinearSelection);
232 aFactory->registerValidator("PartSet_MiddlePointSelection", new PartSet_MiddlePointSelection);
233 aFactory->registerValidator("PartSet_DifferentObjects", new PartSet_DifferentObjectsValidator);
234 aFactory->registerValidator("PartSet_CoincidentAttr", new PartSet_CoincidentAttr);
237 void PartSet_Module::registerFilters()
239 //Registering of selection filters
240 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
241 ModuleBase_FilterFactory* aFactory = aConnector->selectionFilters();
244 void PartSet_Module::registerProperties()
246 Config_PropManager::registerProp("Sketch planes", "planes_size", "Size", Config_Prop::Double,
248 Config_PropManager::registerProp("Sketch planes", "planes_thickness", "Thickness",
249 Config_Prop::Integer, SKETCH_WIDTH);
250 Config_PropManager::registerProp("Sketch planes", "rotate_to_plane", "Rotate to plane when selected",
251 Config_Prop::Boolean, "false");
254 void PartSet_Module::connectToPropertyPanel(ModuleBase_ModelWidget* theWidget, const bool isToConnect)
256 mySketchMgr->connectToPropertyPanel(theWidget, isToConnect);
259 void PartSet_Module::operationCommitted(ModuleBase_Operation* theOperation)
261 if (PartSet_SketcherMgr::isNestedSketchOperation(theOperation)) {
262 mySketchMgr->commitNestedSketch(theOperation);
265 /// Restart sketcher operations automatically
266 if (!mySketchReentrantMgr->operationCommitted(theOperation)) {
268 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>(theOperation);
269 if (aFOperation && !aFOperation->isEditOperation()) {
270 // the selection is cleared after commit the create operation
271 // in order to do not use the same selected objects in the restarted operation
272 // for common behaviour, the selection is cleared even if the operation is not restarted
273 getWorkshop()->selector()->clearSelection();
278 void PartSet_Module::operationAborted(ModuleBase_Operation* theOperation)
280 /// Restart sketcher operations automatically
281 mySketchReentrantMgr->operationAborted(theOperation);
284 void PartSet_Module::operationStarted(ModuleBase_Operation* theOperation)
286 ModuleBase_IWorkshop* anIWorkshop = workshop();
287 if (!theOperation->getDescription()->hasXmlRepresentation()) { //!< No need for property panel
288 anIWorkshop->updateCommandStatus();
291 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>
294 XGUI_Workshop* aWorkshop = XGUI_Tools::workshop(anIWorkshop);
295 XGUI_PropertyPanel* aPropertyPanel = aWorkshop->propertyPanel();
296 ModuleBase_ModelWidget* aFilledWidget = 0;
297 bool aPostonedWidgetActivation = false;
298 FeaturePtr aFeature = aFOperation->feature();
300 std::string aGreedAttributeId = ModuleBase_Tools::findGreedAttribute(anIWorkshop, aFeature);
301 // if there is a greed attribute, automatic commit by preselection for this feature is prohibited
302 aWorkshop->setPropertyPanel(aFOperation);
304 // filling the operation values by the current selection
305 // if the operation can be committed after the controls filling, the method perform should
306 // be stopped. Otherwise unnecessary presentations can be shown(e.g. operation prs in sketch)
307 bool isOperationCommitted = false;
308 if (!aFOperation->isEditOperation()) {
309 aFilledWidget = aFOperation->activateByPreselection(aGreedAttributeId);
310 if (currentOperation() != aFOperation)
311 isOperationCommitted = true;
313 if (aGreedAttributeId.empty()) {
314 // a signal should be emitted before the next widget activation
315 // because, the activation of the next widget will give a focus to the widget. As a result
316 // the value of the widget is initialized. And commit may happens until the value is entered.
318 if (mySketchReentrantMgr->canBeCommittedByPreselection())
319 isOperationCommitted = mySketchMgr->operationActivatedByPreselection();
320 // activate the next obligatory widget
321 if (!isOperationCommitted)
322 aPropertyPanel->activateNextWidget(aFilledWidget);
325 else { // there is a greed widget
326 const QList<ModuleBase_ModelWidget*>& aWidgets = aPropertyPanel->modelWidgets();
327 std::string aFirstAttributeId = aWidgets.front()->attributeID();
328 // activate next widget after greeded if it is the first widget in the panel
329 // else the first panel widget is already activated by operation start
330 if (aFirstAttributeId == aGreedAttributeId)
331 aPostonedWidgetActivation = true;
334 } if (!isOperationCommitted) {
335 anIWorkshop->updateCommandStatus();
336 aWorkshop->connectToPropertyPanel(true);
337 operationStartedInternal(aFOperation);
339 // the objects of the current operation should be deactivated
340 QObjectPtrList anObjects;
341 anObjects.append(aFeature);
342 std::list<ResultPtr> aResults;
343 ModelAPI_Tools::allResults(aFeature, aResults);
344 std::list<ResultPtr>::const_iterator aIt;
345 for (aIt = aResults.begin(); aIt != aResults.end(); ++aIt) {
346 anObjects.append(*aIt);
348 QObjectPtrList::const_iterator anIt = anObjects.begin(), aLast = anObjects.end();
349 for (; anIt != aLast; anIt++)
350 aWorkshop->deactivateActiveObject(*anIt, false);
351 if (anObjects.size() > 0) {
352 XGUI_Displayer* aDisplayer = aWorkshop->displayer();
353 aDisplayer->updateViewer();
356 if (aPostonedWidgetActivation) {
357 // if the widget is an empty in the chain of activated widgets, the current operation
358 // is restarted. It should be performed after functionality of the operation starting
359 aPropertyPanel->activateNextWidget(aFilledWidget);
365 void PartSet_Module::operationStartedInternal(ModuleBase_Operation* theOperation)
367 /// Restart sketcher operations automatically
368 mySketchReentrantMgr->operationStarted(theOperation);
370 if (PartSet_SketcherMgr::isSketchOperation(theOperation)) {
371 mySketchMgr->startSketch(theOperation);
373 else if (PartSet_SketcherMgr::isNestedSketchOperation(theOperation)) {
374 mySketchMgr->startNestedSketch(theOperation);
377 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>(theOperation);
379 myCustomPrs->activate(aFOperation->feature(), ModuleBase_IModule::CustomizeArguments, true);
380 myCustomPrs->activate(aFOperation->feature(), ModuleBase_IModule::CustomizeResults, true);
384 void PartSet_Module::operationResumed(ModuleBase_Operation* theOperation)
386 ModuleBase_IModule::operationResumed(theOperation);
388 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>(theOperation);
390 myCustomPrs->activate(aFOperation->feature(), ModuleBase_IModule::CustomizeArguments, true);
391 myCustomPrs->activate(aFOperation->feature(), ModuleBase_IModule::CustomizeResults, true);
395 void PartSet_Module::operationStopped(ModuleBase_Operation* theOperation)
397 bool isModifiedArgs = myCustomPrs->deactivate(ModuleBase_IModule::CustomizeArguments, false);
398 bool isModifiedResults = myCustomPrs->deactivate(ModuleBase_IModule::CustomizeResults, false);
399 bool isModified = isModifiedArgs || isModifiedResults;
401 if (PartSet_SketcherMgr::isNestedSketchOperation(theOperation)) {
402 mySketchMgr->stopNestedSketch(theOperation);
404 else if (PartSet_SketcherMgr::isSketchOperation(theOperation))
405 setDefaultConstraintShown();
407 //VSV: Viewer is updated on feature update and redisplay
409 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(myWorkshop);
410 XGUI_Displayer* aDisplayer = aConnector->workshop()->displayer();
411 aDisplayer->updateViewer();
414 QMap<PartSet_Tools::ConstraintVisibleState, bool>::const_iterator anIt = myHasConstraintShown.begin(),
415 aLast = myHasConstraintShown.end();
416 for (; anIt != aLast; anIt++) {
417 mySketchMgr->updateBySketchParameters(anIt.key(), anIt.value());
421 ModuleBase_Operation* PartSet_Module::currentOperation() const
423 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
424 XGUI_OperationMgr* anOpMgr = aConnector->workshop()->operationMgr();
425 return anOpMgr->currentOperation();
428 bool PartSet_Module::canUndo() const
430 bool aCanUndo = false;
431 SessionPtr aMgr = ModelAPI_Session::get();
432 if (aMgr->hasModuleDocument() && aMgr->canUndo()) {
433 aCanUndo = !aMgr->isOperation();
434 if (!aCanUndo) // check the enable state additionally by sketch manager
435 aCanUndo = aMgr->canUndo();
440 bool PartSet_Module::canRedo() const
442 bool aCanRedo = false;
443 SessionPtr aMgr = ModelAPI_Session::get();
444 if (aMgr->hasModuleDocument() && aMgr->canRedo()) {
445 aCanRedo = !aMgr->isOperation();
446 if (!aCanRedo) // check the enable state additionally by sketch manager
447 aCanRedo = aMgr->canRedo();
452 bool PartSet_Module::canApplyAction(const ObjectPtr& theObject, const QString& theActionId) const
455 if (theActionId == "MOVE_CMD") {
456 FeaturePtr aFeature = ModelAPI_Feature::feature(theObject);
458 ResultPtr aResult = ModuleBase_Tools::firstResult(aFeature);
459 // part features can not be moved in the history.
460 if (aResult.get() && aResult->groupName() == ModelAPI_ResultPart::group())
467 bool PartSet_Module::canEraseObject(const ObjectPtr& theObject) const
469 // the sketch manager put the restriction to the objects erase
470 return mySketchMgr->canEraseObject(theObject);
473 bool PartSet_Module::canDisplayObject(const ObjectPtr& theObject) const
475 // the sketch manager put the restriction to the objects display
476 return mySketchMgr->canDisplayObject(theObject);
479 /*void PartSet_Module::processHiddenObject(const std::list<ObjectPtr>& theObjects)
481 mySketchMgr->processHiddenObject(theObjects);
484 bool PartSet_Module::canActivateSelection(const ObjectPtr& theObject) const
486 bool aCanActivate = ModuleBase_IModule::canActivateSelection(theObject);
488 ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
489 bool isSketchOp = PartSet_SketcherMgr::isSketchOperation(anOperation),
490 isNestedOp = PartSet_SketcherMgr::isNestedSketchOperation(anOperation);
491 if (isSketchOp || isNestedOp) {
492 // in active sketch operation it is possible to activate operation object in selection
493 // in the edit operation, e.g. points of the line can be moved when the line is edited
494 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>(anOperation);
495 aCanActivate = aCanActivate || (aFOperation && aFOperation->isEditOperation());
500 bool PartSet_Module::addViewerMenu(const QMap<QString, QAction*>& theStdActions,
502 QMap<int, QAction*>& theMenuActions) const
504 return myMenuMgr->addViewerMenu(theStdActions, theParent, theMenuActions);
507 void PartSet_Module::updateViewerMenu(const QMap<QString, QAction*>& theStdActions)
509 myMenuMgr->updateViewerMenu(theStdActions);
512 bool PartSet_Module::isActionEnableStateFixed(const int theActionId) const
514 bool isEnabledFixed = false;
515 if (theActionId == XGUI_ActionsMgr::AcceptAll &&
516 mySketchReentrantMgr->isInternalEditStarted())
517 isEnabledFixed = true;
518 return isEnabledFixed;
521 QString PartSet_Module::getFeatureError(const FeaturePtr& theFeature)
523 QString anError = ModuleBase_IModule::getFeatureError(theFeature);
524 if (anError.isEmpty())
525 anError = sketchMgr()->getFeatureError(theFeature);
530 void PartSet_Module::grantedOperationIds(ModuleBase_Operation* theOperation,
531 QStringList& theIds) const
533 myMenuMgr->grantedOperationIds(theOperation, theIds);
535 if (PartSet_SketcherMgr::isSketchOperation(theOperation)) {
536 XGUI_Workshop* aWorkshop = getWorkshop();
537 theIds.append(aWorkshop->contextMenuMgr()->action("DELETE_CMD")->text());
541 void PartSet_Module::activeSelectionModes(QIntList& theModes)
544 if (mySketchMgr->activeSketch().get())
545 PartSet_SketcherMgr::sketchSelectionModes(theModes);
548 void PartSet_Module::customSubShapesSelectionModes(QIntList& theTypes)
550 if (theTypes.contains(TopAbs_FACE))
551 theTypes.append(SketcherPrs_Tools::Sel_Sketch_Face);
552 if (theTypes.contains(TopAbs_WIRE))
553 theTypes.append(SketcherPrs_Tools::Sel_Sketch_Wire);
556 bool PartSet_Module::isMouseOverWindow()
558 return mySketchMgr->isMouseOverWindow();
561 bool PartSet_Module::isSketchNeutralPointActivated() const
563 bool isNeutralPoint = true;
564 if (sketchReentranceMgr()->isInternalEditStarted())
565 isNeutralPoint = false;
566 if (myIsOperationIsLaunched)
567 isNeutralPoint = false;
569 return isNeutralPoint;
572 void PartSet_Module::closeDocument()
577 void PartSet_Module::clearViewer()
579 myCustomPrs->clearPrs();
581 XGUI_Workshop* aWorkshop = getWorkshop();
582 XGUI_Displayer* aDisplayer = aWorkshop->displayer();
583 aDisplayer->deactivateSelectionFilters();
586 void PartSet_Module::propertyPanelDefined(ModuleBase_Operation* theOperation)
588 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>(theOperation);
592 ModuleBase_IPropertyPanel* aPanel = aFOperation->propertyPanel();
593 // we have to manually activate the sketch label in edit mode
594 if (PartSet_SketcherMgr::isSketchOperation(aFOperation) && (aFOperation->isEditOperation()))
595 aPanel->activateWidget(aPanel->modelWidgets().first());
598 bool PartSet_Module::createWidgets(ModuleBase_Operation* theOperation,
599 QList<ModuleBase_ModelWidget*>& theWidgets) const
601 bool aProcessed = false;
603 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>(theOperation);
604 XGUI_Workshop* aWorkshop = getWorkshop();
605 XGUI_PropertyPanel* aPropertyPanel = aWorkshop->propertyPanel();
606 if (mySketchMgr->activeSketch().get() && aFOperation && aPropertyPanel) {
607 ModuleBase_ISelection* aSelection = workshop()->selection();
608 // click on a point in sketch leads here with the point is highlighted, not yet selected
609 QList<ModuleBase_ViewerPrsPtr> aPreselection = aSelection->getHighlighted();
610 if (aPreselection.size() == 1) {
611 ModuleBase_ViewerPrsPtr aSelectedPrs = aPreselection[0];
612 ObjectPtr anObject = aSelectedPrs->object();
614 FeaturePtr aFeature = ModelAPI_Feature::feature(anObject);
615 FeaturePtr anOpFeature = aFOperation->feature();
616 GeomShapePtr aShape = aSelectedPrs->shape();
617 // click on the digit of dimension constrain comes here with an empty shape, so we need the check
618 if (aFeature == anOpFeature && aShape.get() && !aShape->isNull()) {
619 const TopoDS_Shape& aTDShape = aShape->impl<TopoDS_Shape>();
620 AttributePtr anAttribute = PartSet_Tools::findAttributeBy2dPoint(anObject, aTDShape,
621 mySketchMgr->activeSketch());
622 if (anAttribute.get()) {
623 QString aXmlRepr = aFOperation->getDescription()->xmlRepresentation();
624 ModuleBase_WidgetFactory aFactory(aXmlRepr.toStdString(), workshop());
626 const std::string anAttributeId = anAttribute->id();
627 aFactory.createWidget(aPropertyPanel->contentWidget(), anAttributeId);
629 theWidgets = aFactory.getModelWidgets();
630 // it is possible that the point does not present in XML definition,
631 // in this case, we assume that it is not processed by this module
632 // e.g. "Intersection point" feature
633 aProcessed = !theWidgets.isEmpty();
641 void PartSet_Module::onSelectionChanged()
643 ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
647 bool isSketcherOp = false;
648 // An edit operation is enable only if the current opeation is the sketch operation
649 if (mySketchMgr->activeSketch()) {
650 if (PartSet_Tools::sketchPlane(mySketchMgr->activeSketch()))
651 isSketcherOp = PartSet_SketcherMgr::isSketchOperation(aOperation);
654 // Editing of constraints can be done on selection
655 ModuleBase_ISelection* aSelect = myWorkshop->selection();
656 QList<ModuleBase_ViewerPrsPtr> aSelected = aSelect->getSelected();
657 if (aSelected.size() == 1) {
658 ModuleBase_ViewerPrsPtr aPrs = aSelected.first();
659 ObjectPtr aObject = aPrs->object();
660 FeaturePtr aFeature = ModelAPI_Feature::feature(aObject);
662 std::string aId = aFeature->getKind();
663 if ((aId == SketchPlugin_ConstraintRadius::ID()) ||
664 (aId == SketchPlugin_ConstraintLength::ID()) ||
665 (aId == SketchPlugin_ConstraintDistance::ID()) ||
666 (aId == SketchPlugin_ConstraintAngle::ID())) {
667 editFeature(aFeature);
674 void PartSet_Module::onKeyRelease(ModuleBase_IViewWindow* theWnd, QKeyEvent* theEvent)
676 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
677 XGUI_OperationMgr* anOpMgr = aConnector->workshop()->operationMgr();
678 anOpMgr->onKeyReleased(theWnd->viewPort(), theEvent);
681 ModuleBase_ModelWidget* PartSet_Module::createWidgetByType(const std::string& theType,
683 Config_WidgetAPI* theWidgetApi)
685 ModuleBase_IWorkshop* aWorkshop = workshop();
686 XGUI_Workshop* aXUIWorkshop = getWorkshop();
687 ModuleBase_ModelWidget* aWgt = NULL;
688 if (theType == "sketch-start-label") {
689 PartSet_WidgetSketchLabel* aLabelWgt = new PartSet_WidgetSketchLabel(theParent, aWorkshop,
690 theWidgetApi, myHasConstraintShown);
691 connect(aLabelWgt, SIGNAL(planeSelected(const std::shared_ptr<GeomAPI_Pln>&)),
692 mySketchMgr, SLOT(onPlaneSelected(const std::shared_ptr<GeomAPI_Pln>&)));
693 connect(aLabelWgt, SIGNAL(showConstraintToggled(int, bool)),
694 mySketchMgr, SLOT(onShowConstraintsToggle(int, bool)));
696 } else if (theType == "sketch-2dpoint_selector") {
697 PartSet_WidgetPoint2D* aPointWgt = new PartSet_WidgetPoint2D(theParent, aWorkshop,
699 aPointWgt->setSketch(mySketchMgr->activeSketch());
700 connect(aPointWgt, SIGNAL(vertexSelected()), sketchReentranceMgr(), SLOT(onVertexSelected()));
702 }else if (theType == "sketch-2dpoint_flyout_selector") {
703 PartSet_WidgetPoint2DFlyout* aPointWgt = new PartSet_WidgetPoint2DFlyout(theParent, aWorkshop,
705 aPointWgt->setSketch(mySketchMgr->activeSketch());
706 connect(aPointWgt, SIGNAL(vertexSelected()), sketchReentranceMgr(), SLOT(onVertexSelected()));
708 } else if (theType == "point2ddistance") {
709 PartSet_WidgetPoint2dDistance* aDistanceWgt = new PartSet_WidgetPoint2dDistance(theParent,
710 aWorkshop, theWidgetApi);
711 aDistanceWgt->setSketch(mySketchMgr->activeSketch());
713 } else if (theType == "sketch_shape_selector") {
714 PartSet_WidgetShapeSelector* aShapeSelectorWgt =
715 new PartSet_WidgetShapeSelector(theParent, aWorkshop, theWidgetApi);
716 aShapeSelectorWgt->setSketcher(mySketchMgr->activeSketch());
717 aWgt = aShapeSelectorWgt;
718 } else if (theType == "sketch_multi_selector") {
719 PartSet_WidgetMultiSelector* aShapeSelectorWgt =
720 new PartSet_WidgetMultiSelector(theParent, aWorkshop, theWidgetApi);
721 aShapeSelectorWgt->setSketcher(mySketchMgr->activeSketch());
722 aWgt = aShapeSelectorWgt;
724 else if (theType == WDG_DOUBLEVALUE_EDITOR) {
725 aWgt = new PartSet_WidgetEditor(theParent, aWorkshop, theWidgetApi);
726 } else if (theType == "export_file_selector") {
727 aWgt = new PartSet_WidgetFileSelector(theParent, aWorkshop, theWidgetApi);
728 } else if (theType == "sketch_launcher") {
729 aWgt = new PartSet_WidgetSketchCreator(theParent, this, theWidgetApi);
730 } else if (theType == "module_choice") {
731 aWgt = new PartSet_WidgetChoice(theParent, theWidgetApi);
732 connect(aWgt, SIGNAL(itemSelected(ModuleBase_ModelWidget*, int)),
733 this, SLOT(onChoiceChanged(ModuleBase_ModelWidget*, int)));
738 ModuleBase_ModelWidget* PartSet_Module::activeWidget() const
740 ModuleBase_ModelWidget* anActiveWidget = 0;
742 anActiveWidget = mySketchReentrantMgr->internalActiveWidget();
743 if (!anActiveWidget) {
744 ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
746 ModuleBase_IPropertyPanel* aPanel = aOperation->propertyPanel();
747 anActiveWidget = aPanel->activeWidget();
750 return anActiveWidget;
753 bool PartSet_Module::deleteObjects()
755 bool isProcessed = false;
757 XGUI_Workshop* aWorkshop = getWorkshop();
758 XGUI_OperationMgr* anOpMgr = aWorkshop->operationMgr();
760 //SessionPtr aMgr = ModelAPI_Session::get();
761 // 1. check whether the delete should be processed in the module
762 ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
763 bool isSketchOp = PartSet_SketcherMgr::isSketchOperation(anOperation),
764 isNestedOp = PartSet_SketcherMgr::isNestedSketchOperation(anOperation);
765 if (isSketchOp || isNestedOp) {
767 // 2. find selected presentations
768 // selected objects should be collected before the current operation abort because
769 // the abort leads to selection lost on constraint objects. It can be corrected after #386 issue
770 ModuleBase_ISelection* aSel = workshop()->selection();
771 QObjectPtrList aSelectedObj = aSel->selectedPresentations();
772 // if there are no selected objects in the viewer, that means that the selection in another
773 // place cased this method. It is necessary to return the false value to understande in above
774 // method that delete is not processed
775 if (aSelectedObj.count() == 0)
778 // avoid delete of the objects, which are not belong to the current sketch
779 // in order to do not delete results of other sketches
780 QObjectPtrList aSketchObjects;
781 QObjectPtrList::const_iterator anIt = aSelectedObj.begin(), aLast = aSelectedObj.end();
782 for ( ; anIt != aLast; anIt++) {
783 ObjectPtr anObject = *anIt;
784 if (mySketchMgr->isObjectOfSketch(anObject)) {
785 // sketch feature should be used in this list because workshop deletes features only
786 // results are skipped
787 FeaturePtr aSketchFeature = ModelAPI_Feature::feature(anObject);
788 aSketchObjects.append(aSketchFeature);
791 // if the selection contains only local selected presentations from other sketches,
792 // the Delete operation should not be done at all
793 if (aSketchObjects.size() == 0)
796 // 3. start operation
797 QString aDescription = aWorkshop->contextMenuMgr()->action("DELETE_CMD")->text();
798 ModuleBase_OperationAction* anOpAction = new ModuleBase_OperationAction(aDescription, this);
800 // the active nested sketch operation should be aborted unconditionally
801 // the Delete action should be additionally granted for the Sketch operation
802 // in order to do not abort/commit it
803 if (!anOpMgr->canStartOperation(anOpAction->id()))
804 return true; // the objects are processed but can not be deleted
806 anOpMgr->startOperation(anOpAction);
808 // WORKAROUND, should be done to avoid viewer highlight update after deletetion of objects
809 // the problem is in AIS Dimensions recompute if a line and the dim are removed, line is the first
810 // it causes the AIS recompute, where the base line is null, the result is empty AIS in the viewer
811 XGUI_Tools::workshop(myWorkshop)->selector()->clearSelection();
813 // 4. delete features
814 // sketch feature should be skipped, only sub-features can be removed
815 // when sketch operation is active
816 aWorkshop->deleteFeatures(aSketchObjects);
818 anOpMgr->commitOperation();
823 void PartSet_Module::onFeatureTriggered()
825 // is commented for imp: Unpressing the button of the current action must behave like
826 // a validation if the entity can be created (instead of Cancel, as currently)
827 /*QAction* aCmd = dynamic_cast<QAction*>(sender());
828 if (aCmd->isCheckable() && aCmd->isChecked()) {
829 // 1. check whether the delete should be processed in the module
830 ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
831 bool isNestedOp = PartSet_SketcherMgr::isNestedCreateOperation(anOperation);
833 // in case if in the viewer nothing is displayed, the create operation should not be
834 // comitted even if all values of the feature are initialized
835 if (!mySketchMgr->canDisplayCurrentCreatedFeature()) {
836 // the action information should be saved before the operation is aborted
837 // because this abort leads to update command status, which unchecks this action
838 anOperation->abort();
839 launchOperation(aCmd->data().toString());
843 ModuleBase_IModule::onFeatureTriggered();
846 void PartSet_Module::editFeature(FeaturePtr theFeature)
848 storeConstraintsState(theFeature->getKind());
849 ModuleBase_IModule::editFeature(theFeature);
852 bool PartSet_Module::canCommitOperation() const
857 void PartSet_Module::launchOperation(const QString& theCmdId,
858 const bool isUpdatePropertyPanel)
860 myIsOperationIsLaunched = true;
861 storeConstraintsState(theCmdId.toStdString());
862 updateConstraintsState(theCmdId.toStdString());
864 ModuleBase_IModule::launchOperation(theCmdId, isUpdatePropertyPanel);
866 myIsOperationIsLaunched = false;
869 void PartSet_Module::storeConstraintsState(const std::string& theFeatureKind)
871 if (myWorkshop->currentOperation() &&
872 myWorkshop->currentOperation()->id().toStdString() == SketchPlugin_Sketch::ID()) {
873 const QMap<PartSet_Tools::ConstraintVisibleState, bool>& aShownStates =
874 mySketchMgr->showConstraintStates();
875 myHasConstraintShown = aShownStates;
879 void PartSet_Module::updateConstraintsState(const std::string& theFeatureKind)
881 if (PartSet_SketcherMgr::constraintsIdList().contains(theFeatureKind.c_str()) ||
882 PartSet_SketcherMgr::replicationsIdList().contains(theFeatureKind.c_str())) {
883 // Show constraints if a constraint was anOperation
884 mySketchMgr->updateBySketchParameters(PartSet_Tools::Geometrical, true);
885 mySketchMgr->updateBySketchParameters(PartSet_Tools::Dimensional, true);
886 mySketchMgr->updateBySketchParameters(PartSet_Tools::Expressions,
887 myHasConstraintShown[PartSet_Tools::Expressions]);
891 void PartSet_Module::onObjectDisplayed(ObjectPtr theObject, AISObjectPtr theAIS)
893 Handle(AIS_InteractiveObject) anAIS = theAIS->impl<Handle(AIS_InteractiveObject)>();
894 if (!anAIS.IsNull()) {
895 Handle(AIS_InteractiveContext) aCtx = anAIS->GetContext();
896 Handle(AIS_Dimension) aDim = Handle(AIS_Dimension)::DownCast(anAIS);
897 if (!aDim.IsNull()) {
898 aCtx->SetZLayer(aDim, myVisualLayerId);
900 Handle(SketcherPrs_SymbolPrs) aCons = Handle(SketcherPrs_SymbolPrs)::DownCast(anAIS);
902 aCtx->SetZLayer(aCons, myVisualLayerId);
907 void PartSet_Module::onBeforeObjectErase(ObjectPtr theObject, AISObjectPtr theAIS)
910 // it should be recomputed in order to disappear in the viewer if the corresponded object
912 //if (myCustomPrs->isActive())
913 // myCustomPrs->redisplay(theObject, false);
916 void PartSet_Module::onViewTransformed(int theTrsfType)
918 // Set length of arrows constant in pixel size
919 // if the operation is panning or rotate or panglobal then do nothing
920 if ((theTrsfType == 1) || (theTrsfType == 3) || (theTrsfType == 4))
922 ModuleBase_IViewer* aViewer = myWorkshop->viewer();
923 Handle(AIS_InteractiveContext) aContext = aViewer->AISContext();
924 if (aContext.IsNull())
927 //Handle(V3d_View) aView = aViewer->activeView();
929 XGUI_Workshop* aWorkshop = getWorkshop();
930 XGUI_Displayer* aDisplayer = aWorkshop->displayer();
931 Handle(V3d_Viewer) aV3dViewer = aContext->CurrentViewer();
932 Handle(V3d_View) aView;
934 for (aV3dViewer->InitDefinedViews();
935 aV3dViewer->MoreDefinedViews();
936 aV3dViewer->NextDefinedViews()) {
937 Handle(V3d_View) aV = aV3dViewer->DefinedView();
938 double aS = aV->Scale();
946 double aLen = aView->Convert(SketcherPrs_Tools::getDefaultArrowSize());
948 double aPrevLen = SketcherPrs_Tools::getArrowSize();
949 SketcherPrs_Tools::setArrowSize(aLen);
950 const double aPrevScale = aViewer->Scale(aViewer->activeView());
951 const double aCurScale = aViewer->activeView()->Camera()->Scale();
952 aViewer->SetScale(aViewer->activeView(), aCurScale);
953 SketcherPrs_Tools::setTextHeight (aCurScale / aPrevScale * SketcherPrs_Tools::getTextHeight());
954 bool isModified = false;
955 QList<AISObjectPtr> aPrsList = aDisplayer->displayedPresentations();
956 foreach (AISObjectPtr aAIS, aPrsList) {
957 Handle(AIS_InteractiveObject) aAisObj = aAIS->impl<Handle(AIS_InteractiveObject)>();
959 Handle(AIS_Dimension) aDim = Handle(AIS_Dimension)::DownCast(aAisObj);
960 if (!aDim.IsNull()) {
961 aDim->DimensionAspect()->ArrowAspect()->SetLength(aLen);
962 aContext->Redisplay(aDim, false);
967 aDisplayer->updateViewer();
970 void PartSet_Module::activateCustomPrs(const FeaturePtr& theFeature, const ModuleBase_CustomizeFlag& theFlag,
971 const bool theUpdateViewer)
973 myCustomPrs->activate(theFeature, theFlag, theUpdateViewer);
976 void PartSet_Module::deactivateCustomPrs(const ModuleBase_CustomizeFlag& theFlag,
977 const bool theUpdateViewer)
979 myCustomPrs->deactivate(theFlag, theUpdateViewer);
982 bool PartSet_Module::customisePresentation(ResultPtr theResult, AISObjectPtr thePrs,
983 std::shared_ptr<GeomAPI_ICustomPrs> theCustomPrs)
985 bool aCustomized = false;
987 XGUI_Workshop* aWorkshop = getWorkshop();
988 XGUI_Displayer* aDisplayer = aWorkshop->displayer();
989 ObjectPtr anObject = aDisplayer->getObject(thePrs);
993 if (!theResult.get()) {
994 bool isConflicting = myOverconstraintListener->isConflictingObject(anObject);
995 // customize sketch symbol presentation
997 Handle(AIS_InteractiveObject) anAISIO = thePrs->impl<Handle(AIS_InteractiveObject)>();
998 if (!anAISIO.IsNull()) {
999 if (!Handle(SketcherPrs_SymbolPrs)::DownCast(anAISIO).IsNull()) {
1000 Handle(SketcherPrs_SymbolPrs) aPrs = Handle(SketcherPrs_SymbolPrs)::DownCast(anAISIO);
1001 if (!aPrs.IsNull()) {
1002 std::vector<int> aColor;
1003 myOverconstraintListener->getConflictingColor(aColor);
1004 aPrs->SetConflictingConstraint(isConflicting, aColor);
1007 } else if (!Handle(SketcherPrs_Coincident)::DownCast(anAISIO).IsNull()) {
1008 Handle(SketcherPrs_Coincident) aPrs = Handle(SketcherPrs_Coincident)::DownCast(anAISIO);
1009 if (!aPrs.IsNull()) {
1010 std::vector<int> aColor;
1011 myOverconstraintListener->getConflictingColor(aColor);
1012 aPrs->SetConflictingConstraint(isConflicting, aColor);
1018 // customize sketch dimension constraint presentation
1020 std::vector<int> aColor;
1021 if (isConflicting) {
1022 myOverconstraintListener->getConflictingColor(aColor);
1025 XGUI_CustomPrs::getDefaultColor(anObject, true, aColor);
1026 if (!aColor.empty()) {
1027 aCustomized = thePrs->setColor(aColor[0], aColor[1], aColor[2]);
1031 // customize dimentional constrains
1032 sketchMgr()->customizePresentation(anObject);
1037 bool PartSet_Module::customizeObject(ObjectPtr theObject, const ModuleBase_CustomizeFlag& theFlag,
1038 const bool theUpdateViewer)
1040 bool isRedisplayed = false;
1041 if (myCustomPrs->isActive(theFlag))
1042 isRedisplayed = myCustomPrs->redisplay(theObject, theFlag, theUpdateViewer);
1044 return isRedisplayed;
1047 void PartSet_Module::customizeObjectBrowser(QWidget* theObjectBrowser)
1049 XGUI_ObjectsBrowser* aOB = dynamic_cast<XGUI_ObjectsBrowser*>(theObjectBrowser);
1051 QLabel* aLabel = aOB->activeDocLabel();
1052 aLabel->installEventFilter(myMenuMgr);
1053 connect(aLabel, SIGNAL(customContextMenuRequested(const QPoint&)),
1054 SLOT(onActiveDocPopup(const QPoint&)));
1055 //QPalette aPalet = aLabel->palette();
1056 //aPalet.setColor(QPalette::Text, QColor(0, 72, 140));
1057 //aLabel->setPalette(aPalet);
1058 aOB->treeView()->setExpandsOnDoubleClick(false);
1059 connect(aOB->treeView(), SIGNAL(doubleClicked(const QModelIndex&)),
1060 SLOT(onTreeViewDoubleClick(const QModelIndex&)));
1064 void PartSet_Module::onActiveDocPopup(const QPoint& thePnt)
1066 SessionPtr aMgr = ModelAPI_Session::get();
1067 QAction* aActivatePartAction = myMenuMgr->action("ACTIVATE_PARTSET_CMD");
1069 XGUI_Workshop* aWorkshop = getWorkshop();
1070 QLabel* aHeader = aWorkshop->objectBrowser()->activeDocLabel();
1072 aActivatePartAction->setEnabled((aMgr->activeDocument() != aMgr->moduleDocument()));
1075 aMenu.addAction(aActivatePartAction);
1076 aMenu.exec(aHeader->mapToGlobal(thePnt));
1079 Handle(AIS_InteractiveObject) PartSet_Module::createPresentation(const ResultPtr& theResult)
1081 return mySketchMgr->createPresentation(theResult);
1085 ObjectPtr PartSet_Module::findPresentedObject(const AISObjectPtr& theAIS) const
1088 ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
1090 /// If last line finished on vertex the lines creation sequence has to be break
1091 ModuleBase_IPropertyPanel* aPanel = aOperation->propertyPanel();
1093 ModuleBase_ModelWidget* anActiveWidget = aPanel->activeWidget();
1094 // if there is an active widget, find the presented object in it
1095 if (!anActiveWidget)
1096 anActiveWidget = aPanel->preselectionWidget();
1098 ModuleBase_WidgetValidated* aWidgetValidated = dynamic_cast<ModuleBase_WidgetValidated*>
1100 if (aWidgetValidated)
1101 anObject = aWidgetValidated->findPresentedObject(theAIS);
1107 bool PartSet_Module::canBeShaded(Handle(AIS_InteractiveObject) theAIS) const
1109 bool aCanBeShaged = true;
1111 Handle(PartSet_ResultSketchPrs) aPrs = Handle(PartSet_ResultSketchPrs)::DownCast(theAIS);
1113 aCanBeShaged = false;
1115 return aCanBeShaged;
1118 void PartSet_Module::addObjectBrowserMenu(QMenu* theMenu) const
1120 QObjectPtrList aObjects = myWorkshop->selection()->selectedObjects();
1121 int aSelected = aObjects.size();
1122 SessionPtr aMgr = ModelAPI_Session::get();
1123 QAction* aActivatePartAction = myMenuMgr->action("ACTIVATE_PART_CMD");
1125 ModuleBase_Operation* aCurrentOp = myWorkshop->currentOperation();
1126 if (aSelected == 1) {
1127 bool hasResult = false;
1128 bool hasFeature = false;
1129 bool hasParameter = false;
1130 bool hasCompositeOwner = false;
1131 ModuleBase_Tools::checkObjects(aObjects, hasResult, hasFeature, hasParameter,
1133 ObjectPtr aObject = aObjects.first();
1135 ResultPartPtr aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aObject);
1136 FeaturePtr aFeature = std::dynamic_pointer_cast<ModelAPI_Feature>(aObject);
1137 bool isPart = aPart.get() ||
1138 (aFeature.get() && (aFeature->getKind() == PartSetPlugin_Part::ID()));
1140 DocumentPtr aPartDoc;
1142 aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aFeature->firstResult());
1144 if (aPart.get()) // this may be null is Part feature is disabled
1145 aPartDoc = aPart->partDoc();
1147 theMenu->addAction(aActivatePartAction);
1148 aActivatePartAction->setEnabled((aMgr->activeDocument() != aPartDoc));
1150 } else if (aObject->document() == aMgr->activeDocument()) {
1151 if (hasParameter || hasFeature) {
1152 myMenuMgr->action("EDIT_CMD")->setEnabled(true);
1153 theMenu->addAction(myMenuMgr->action("EDIT_CMD"));
1154 if (aCurrentOp && aFeature.get()) {
1155 if (aCurrentOp->id().toStdString() == aFeature->getKind())
1156 myMenuMgr->action("EDIT_CMD")->setEnabled(false);
1161 ResultBodyPtr aResult = std::dynamic_pointer_cast<ModelAPI_ResultBody>(aObject);
1163 theMenu->addAction(myMenuMgr->action("SELECT_PARENT_CMD"));
1166 bool aNotDeactivate = (aCurrentOp == 0);
1167 if (!aNotDeactivate) {
1168 aActivatePartAction->setEnabled(false);
1172 void PartSet_Module::processEvent(const std::shared_ptr<Events_Message>& theMessage)
1174 if (theMessage->eventID() == Events_Loop::loop()->eventByName(EVENT_DOCUMENT_CHANGED)) {
1175 // Do not change activation of parts if an operation active
1176 static QStringList aAllowActivationList;
1177 if (aAllowActivationList.isEmpty())
1178 aAllowActivationList <<
1179 QString(PartSetPlugin_Part::ID().c_str()) <<
1180 QString(PartSetPlugin_Duplicate::ID().c_str()) <<
1181 QString(PartSetPlugin_Remove::ID().c_str());
1182 if (myWorkshop->currentOperation() &&
1183 (!aAllowActivationList.contains(myWorkshop->currentOperation()->id())))
1185 XGUI_Workshop* aWorkshop = getWorkshop();
1186 XGUI_DataTree* aTreeView = aWorkshop->objectBrowser()->treeView();
1187 QLabel* aLabel = aWorkshop->objectBrowser()->activeDocLabel();
1188 QPalette aPalet = aLabel->palette();
1190 SessionPtr aMgr = ModelAPI_Session::get();
1191 DocumentPtr aActiveDoc = aMgr->activeDocument();
1192 if (aActivePartIndex.isValid())
1193 aTreeView->setExpanded(aActivePartIndex, false);
1194 XGUI_DataModel* aDataModel = aWorkshop->objectBrowser()->dataModel();
1195 aActivePartIndex = aDataModel->documentRootIndex(aActiveDoc);
1196 if (aActivePartIndex.isValid())
1197 aTreeView->setExpanded(aActivePartIndex, true);
1199 aLabel->setPalette(aPalet);
1200 aWorkshop->updateCommandStatus();
1202 // Update displayed objects in order to update active color
1203 XGUI_Displayer* aDisplayer = aWorkshop->displayer();
1204 QObjectPtrList aObjects = aDisplayer->displayedObjects();
1206 foreach(ObjectPtr aObj, aObjects) {
1207 //TODO: replace by redisplay event.
1208 aHidden = !aObj->data() || !aObj->data()->isValid() ||
1209 aObj->isDisabled() || (!aObj->isDisplayed());
1211 aDisplayer->redisplay(aObj, false);
1213 aDisplayer->updateViewer();
1217 void PartSet_Module::onTreeViewDoubleClick(const QModelIndex& theIndex)
1219 if (myWorkshop->currentOperation()) // Do not change activation of parts if an operation active
1221 SessionPtr aMgr = ModelAPI_Session::get();
1222 if (!theIndex.isValid()) {
1223 aMgr->setActiveDocument(aMgr->moduleDocument());
1226 if (theIndex.column() != 0) // Use only first column
1229 XGUI_Workshop* aWorkshop = getWorkshop();
1230 XGUI_DataModel* aDataModel = aWorkshop->objectBrowser()->dataModel();
1231 // De not use non editable Indexes
1232 if ((aDataModel->flags(theIndex) & Qt::ItemIsSelectable) == 0)
1234 ObjectPtr aObj = aDataModel->object(theIndex);
1236 ResultPartPtr aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aObj);
1237 if (!aPart.get()) { // Probably this is Feature
1238 FeaturePtr aPartFeature = std::dynamic_pointer_cast<ModelAPI_Feature>(aObj);
1239 if (aPartFeature.get() && (aPartFeature->getKind() == PartSetPlugin_Part::ID())) {
1240 aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aPartFeature->firstResult());
1243 if (aPart.get()) { // if this is a part
1244 if (aPart->partDoc() == aMgr->activeDocument()) {
1245 myMenuMgr->activatePartSet();
1253 void PartSet_Module::onViewCreated(ModuleBase_IViewWindow*)
1255 // z layer is created for all started operations in order to visualize operation AIS presentation
1257 Handle(AIS_InteractiveContext) aContext = myWorkshop->viewer()->AISContext();
1258 if (aContext.IsNull())
1261 Handle(V3d_Viewer) aViewer = aContext->CurrentViewer();
1262 if (myVisualLayerId == 0) {
1263 if (myVisualLayerId == 0)
1264 aViewer->AddZLayer(myVisualLayerId);
1266 TColStd_SequenceOfInteger aZList;
1267 aViewer->GetAllZLayers(aZList);
1268 bool aFound = false;
1269 for (int i = 1; i <= aZList.Length(); i++) {
1270 if (aZList(i) == myVisualLayerId) {
1276 aViewer->AddZLayer(myVisualLayerId);
1278 // if there is an active operation with validated widget,
1279 // the filters of this widget should be activated in the created view
1280 ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
1282 ModuleBase_ModelWidget* anActiveWidget = activeWidget();
1283 if (anActiveWidget) {
1284 ModuleBase_WidgetSelector* aWSelector = dynamic_cast<ModuleBase_WidgetSelector*>(anActiveWidget);
1286 aWSelector->activateSelectionAndFilters(true);
1291 //******************************************************
1292 void PartSet_Module::widgetStateChanged(int thePreviousState)
1294 mySketchMgr->widgetStateChanged(thePreviousState);
1297 bool PartSet_Module::processEnter(const std::string& thePreviousAttributeID)
1299 return mySketchReentrantMgr->processEnter(thePreviousAttributeID);
1302 //******************************************************
1303 void PartSet_Module::beforeOperationStarted(ModuleBase_Operation* theOperation)
1307 //******************************************************
1308 void PartSet_Module::beforeOperationStopped(ModuleBase_Operation* theOperation)
1310 if (PartSet_SketcherMgr::isSketchOperation(theOperation)) {
1311 mySketchMgr->stopSketch(theOperation);
1315 //******************************************************
1316 GeomShapePtr PartSet_Module::findShape(const AttributePtr& theAttribute)
1318 GeomShapePtr aGeomShape;
1320 ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
1321 if (anOperation && PartSet_SketcherMgr::isNestedSketchOperation(anOperation)) {
1322 aGeomShape = PartSet_Tools::findShapeBy2DPoint(theAttribute, myWorkshop);
1327 //******************************************************
1328 AttributePtr PartSet_Module::findAttribute(const ObjectPtr& theObject,
1329 const GeomShapePtr& theGeomShape)
1331 AttributePtr anAttribute;
1332 GeomShapePtr aGeomShape = theGeomShape;
1333 if (!aGeomShape.get()) {
1334 // processing shape of result, e.g. sketch circle center is selected, this is a result
1335 // the geom shape is empty, the shape of result should be used
1336 ResultPtr aResult = std::dynamic_pointer_cast<ModelAPI_Result>(theObject);
1337 if (aResult.get()) {
1338 aGeomShape = aResult->shape();
1342 if (aGeomShape.get()) {
1343 TopoDS_Shape aTDSShape = aGeomShape->impl<TopoDS_Shape>();
1344 return PartSet_Tools::findAttributeBy2dPoint(theObject, aTDSShape,
1345 mySketchMgr->activeSketch());
1350 //******************************************************
1351 void PartSet_Module::onChoiceChanged(ModuleBase_ModelWidget* theWidget,
1354 PartSet_WidgetChoice* aChoiceWidget = dynamic_cast<PartSet_WidgetChoice*>(theWidget);
1358 QString aChoiceTitle = aChoiceWidget->getPropertyPanelTitle(theIndex);
1359 if (!aChoiceTitle.isEmpty()) {
1360 ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
1363 ModuleBase_IPropertyPanel* aPanel = aOperation->propertyPanel();
1365 aPanel->setWindowTitle(aChoiceTitle);
1369 //******************************************************
1370 XGUI_Workshop* PartSet_Module::getWorkshop() const
1372 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
1373 return aConnector->workshop();
1376 //******************************************************
1377 void PartSet_Module::setDefaultConstraintShown()
1379 myHasConstraintShown[PartSet_Tools::Geometrical] = true;
1380 myHasConstraintShown[PartSet_Tools::Dimensional] = true;
1381 myHasConstraintShown[PartSet_Tools::Expressions] = false;