1 // Copyright (C) 2014-2020 CEA/DEN, EDF R&D
3 // This library is free software; you can redistribute it and/or
4 // modify it under the terms of the GNU Lesser General Public
5 // License as published by the Free Software Foundation; either
6 // version 2.1 of the License, or (at your option) any later version.
8 // This library is distributed in the hope that it will be useful,
9 // but WITHOUT ANY WARRANTY; without even the implied warranty of
10 // MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
11 // Lesser General Public License for more details.
13 // You should have received a copy of the GNU Lesser General Public
14 // License along with this library; if not, write to the Free Software
15 // Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
17 // See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
20 #include "PartSet_Module.h"
21 #include "PartSet_WidgetSketchLabel.h"
22 #include "PartSet_Validators.h"
23 #include "PartSet_Tools.h"
24 #include "PartSet_PreviewPlanes.h"
25 #include "PartSet_WidgetBSplinePoints.h"
26 #include "PartSet_WidgetPoint2d.h"
27 #include "PartSet_WidgetPoint2DFlyout.h"
28 #include "PartSet_WidgetShapeSelector.h"
29 #include "PartSet_WidgetMultiSelector.h"
30 #include "PartSet_WidgetFeaturePointSelector.h"
31 #include "PartSet_WidgetEditor.h"
32 #include "PartSet_WidgetFileSelector.h"
33 #include "PartSet_WidgetSketchCreator.h"
34 #include "PartSet_SketcherMgr.h"
35 #include "PartSet_SketcherReentrantMgr.h"
36 #include "PartSet_ResultSketchPrs.h"
37 #include "PartSet_MenuMgr.h"
38 #include "PartSet_CustomPrs.h"
39 #include "PartSet_IconFactory.h"
40 #include "PartSet_OverconstraintListener.h"
41 #include "PartSet_TreeNodes.h"
42 #include "PartSet_FieldStepPrs.h"
43 #include "PartSet_BSplineWidget.h"
45 #include "PartSet_Filters.h"
46 #include "PartSet_FilterInfinite.h"
52 #include <PartSetPlugin_Remove.h>
53 #include <PartSetPlugin_Part.h>
54 #include <PartSetPlugin_Duplicate.h>
56 #include <SketchPlugin_ConstraintCoincidence.h>
58 #include <ModuleBase_Operation.h>
59 #include <ModuleBase_IViewer.h>
60 #include <ModuleBase_IViewWindow.h>
61 #include <ModuleBase_IPropertyPanel.h>
62 #include <ModuleBase_ISelectionActivate.h>
63 #include <ModuleBase_WidgetChoice.h>
64 #include <ModuleBase_WidgetEditor.h>
65 #include <ModuleBase_WidgetValidated.h>
66 #include <ModuleBase_Tools.h>
67 #include <ModuleBase_OperationFeature.h>
68 #include <ModuleBase_WidgetFactory.h>
69 #include <ModuleBase_OperationDescription.h>
70 #include <ModuleBase_ViewerPrs.h>
71 #include <ModuleBase_ResultPrs.h>
73 #include <ModelAPI_ResultField.h>
74 #include <ModelAPI_Object.h>
75 #include <ModelAPI_Events.h>
76 #include <ModelAPI_Validator.h>
77 #include <ModelAPI_Data.h>
78 #include <ModelAPI_Session.h>
79 #include <ModelAPI_ResultBody.h>
80 #include <ModelAPI_AttributeString.h>
81 #include <ModelAPI_AttributeSelectionList.h>
82 #include <ModelAPI_Tools.h>
83 #include <ModelAPI_ResultConstruction.h>
84 #include <ModelAPI_AttributeIntArray.h>
85 #include <ModelAPI_ResultGroup.h>
87 #include <GeomDataAPI_Point2D.h>
88 #include <GeomDataAPI_Point.h>
89 #include <GeomDataAPI_Dir.h>
91 #include <XGUI_ActiveControlMgr.h>
92 #include <XGUI_ActiveControlSelector.h>
93 #include <XGUI_ActionsMgr.h>
94 #include <XGUI_ContextMenuMgr.h>
95 #include <XGUI_DataModel.h>
96 #include <XGUI_Displayer.h>
97 #include <XGUI_ErrorMgr.h>
98 #include <XGUI_FacesPanelSelector.h>
99 #include <XGUI_ModuleConnector.h>
100 #include <XGUI_ObjectsBrowser.h>
101 #include <XGUI_OperationMgr.h>
102 #include <XGUI_PropertyPanel.h>
103 #include <XGUI_SelectionMgr.h>
104 #include <XGUI_Tools.h>
105 #include <XGUI_Workshop.h>
107 #include <SketchPlugin_ConstraintAngle.h>
108 #include <SketchPlugin_ConstraintLength.h>
109 #include <SketchPlugin_ConstraintDistance.h>
110 #include <SketchPlugin_ConstraintParallel.h>
111 #include <SketchPlugin_ConstraintPerpendicular.h>
112 #include <SketchPlugin_ConstraintRadius.h>
113 #include <SketchPlugin_Feature.h>
114 #include <SketchPlugin_Projection.h>
115 #include <SketchPlugin_Sketch.h>
117 #include <SketcherPrs_SymbolPrs.h>
118 #include <SketcherPrs_PositionMgr.h>
119 #include <SketcherPrs_Coincident.h>
120 #include <SketcherPrs_Tools.h>
122 #include <Events_Loop.h>
123 #include <Config_PropManager.h>
124 #include <Config_Keywords.h>
126 #include <AIS_Dimension.hxx>
127 #include <AIS_InteractiveObject.hxx>
128 #include <StdSelect_TypeOfFace.hxx>
129 #include <TopoDS_Vertex.hxx>
130 #include <TopoDS.hxx>
131 #include <TopoDS_Shape.hxx>
132 #include <BRep_Tool.hxx>
135 #include <QMouseEvent>
138 #include <QApplication>
139 #include <QMessageBox>
140 #include <QMainWindow>
144 #include <GeomAlgoAPI_FaceBuilder.h>
145 #include <GeomDataAPI_Dir.h>
147 #include <SelectMgr_ListIteratorOfListOfFilter.hxx>
148 #include <Graphic3d_Texture2Dmanual.hxx>
149 #include <OCCViewer_Utilities.h>
152 #define FEATURE_ITEM_COLOR "0,0,225"
155 /*!Create and return new instance of XGUI_Module*/
156 extern "C" PARTSET_EXPORT ModuleBase_IModule* createModule(ModuleBase_IWorkshop* theWshop)
158 return new PartSet_Module(theWshop);
161 //******************************************************
162 PartSet_Module::PartSet_Module(ModuleBase_IWorkshop* theWshop)
163 : ModuleBase_IModule(theWshop),
164 myIsOperationIsLaunched(false),
168 new PartSet_IconFactory(this);
170 mySketchMgr = new PartSet_SketcherMgr(this);
171 mySketchReentrantMgr = new PartSet_SketcherReentrantMgr(theWshop);
173 ModuleBase_IViewer* aViewer = theWshop->viewer();
174 connect(aViewer, SIGNAL(keyRelease(ModuleBase_IViewWindow*, QKeyEvent*)),
175 this, SLOT(onKeyRelease(ModuleBase_IViewWindow*, QKeyEvent*)));
176 connect(aViewer, SIGNAL(viewTransformed(int)),
177 SLOT(onViewTransformed(int)));
178 connect(aViewer, SIGNAL(viewCreated(ModuleBase_IViewWindow*)),
179 SLOT(onViewCreated(ModuleBase_IViewWindow*)));
180 myMenuMgr = new PartSet_MenuMgr(this);
181 myCustomPrs = new PartSet_CustomPrs(theWshop);
183 myOverconstraintListener = new PartSet_OverconstraintListener(theWshop);
185 Events_Loop* aLoop = Events_Loop::loop();
186 aLoop->registerListener(this, Events_Loop::eventByName(EVENT_DOCUMENT_CHANGED));
187 aLoop->registerListener(this, Events_Loop::eventByName(EVENT_OBJECT_TO_REDISPLAY));
189 registerSelectionFilter(SF_GlobalFilter, new PartSet_GlobalFilter(myWorkshop));
190 registerSelectionFilter(SF_FilterInfinite, new PartSet_FilterInfinite(myWorkshop));
191 Handle(PartSet_ResultGroupNameFilter) aCRFilter = new PartSet_ResultGroupNameFilter(myWorkshop);
192 std::set<std::string> aCRGroupNames;
193 aCRGroupNames.insert(ModelAPI_ResultConstruction::group());
194 aCRFilter->setGroupNames(aCRGroupNames);
195 registerSelectionFilter(SF_ResultGroupNameFilter, aCRFilter);
197 setDefaultConstraintShown();
199 //Config_PropManager::registerProp("Visualization", "object_default_color", "Object color",
200 // Config_Prop::Color, "225,225,225");
202 Config_PropManager::registerProp("Visualization", "result_body_color", "Result color",
203 Config_Prop::Color, ModelAPI_ResultBody::DEFAULT_COLOR());
205 Config_PropManager::registerProp("Visualization", "result_group_color", "Group color",
206 Config_Prop::Color, ModelAPI_ResultGroup::DEFAULT_COLOR());
208 Config_PropManager::registerProp("Visualization",
209 ModelAPI_ResultConstruction::DEFAULT_COLOR_CONFIG_NAME(),
210 "Construction color", Config_Prop::Color,
211 ModelAPI_ResultConstruction::DEFAULT_COLOR());
213 Config_PropManager::registerProp("Visualization",
214 ModelAPI_ResultConstruction::ModelApi_PointColor::COLOR_CONFIG_NAME(),
215 "Construction point color", Config_Prop::Color,
216 ModelAPI_ResultConstruction::ModelApi_PointColor::DEFAULT_COLOR());
219 Config_PropManager::registerProp("Visualization", "result_part_color", "Part color",
220 Config_Prop::Color, ModelAPI_ResultPart::DEFAULT_COLOR());
222 Config_PropManager::registerProp("Visualization", "result_field_color", "Field color",
223 Config_Prop::Color, ModelAPI_ResultField::DEFAULT_COLOR());
225 Config_PropManager::registerProp("Visualization", "operation_parameter_color",
226 "Reference shape wireframe color in operation", Config_Prop::Color,
227 PartSet_CustomPrs::OPERATION_PARAMETER_COLOR());
228 Config_PropManager::registerProp("Visualization", "operation_result_color",
229 "Result shape wireframe color in operation", Config_Prop::Color,
230 PartSet_CustomPrs::OPERATION_RESULT_COLOR());
231 Config_PropManager::registerProp("Visualization", "operation_highlight_color",
232 "Multi selector item color in operation", Config_Prop::Color,
233 PartSet_CustomPrs::OPERATION_HIGHLIGHT_COLOR());
234 Config_PropManager::registerProp("Visualization", "operation_remove_feature_color",
235 "Color of removed feature in operation", Config_Prop::Color,
236 PartSet_CustomPrs::OPERATION_REMOVE_FEATURE_COLOR());
237 Config_PropManager::registerProp("Visualization", "sketch_preview_plane",
238 "Color of sketch plane", Config_Prop::Color,
239 PartSet_CustomPrs::OPERATION_SKETCH_PLANE());
241 Config_PropManager::registerProp("Visualization", "hidden_face_transparency",
242 "Hidden faces transparency",
243 Config_Prop::DblSpin,
246 std::ostringstream aStream;
247 aStream << SketcherPrs_Tools::getDefaultArrowSize();
248 Config_PropManager::registerProp("Visualization", "dimension_arrow_size",
249 "Dimension arrow size", Config_Prop::IntSpin, aStream.str());
251 Config_PropManager::registerProp("Visualization", "dimension_font", "Dimension font",
252 Config_Prop::String, "Times-bold");
256 aStream << SketcherPrs_Tools::getDefaultTextHeight();
257 Config_PropManager::registerProp("Visualization", "dimension_value_size",
258 "Dimension value size", Config_Prop::IntSpin, aStream.str());
260 Config_PropManager::registerProp("Visualization", "sketch_dimension_color",
262 Config_Prop::Color, SKETCH_DIMENSION_COLOR);
264 Config_PropManager::registerProp("Visualization", "feature_objectbrowser_color",
265 "Feature items in Object Browser",
266 Config_Prop::Color, FEATURE_ITEM_COLOR);
268 Config_PropManager::registerProp("Visualization", "zoom_trihedron_arrows",
269 "Keep trihedron arrows view size constant", Config_Prop::Boolean, "false");
271 Config_PropManager::registerProp("Visualization", "axis_arrow_size",
272 "Trihedron arrows constant size", Config_Prop::IntSpin, "10");
274 Config_PropManager::registerProp("Shortcuts", "add_parameter_shortcut",
275 "Add parameter in parameters manager dialog",
276 Config_Prop::Shortcut, "Ctrl+A");
278 Config_PropManager::registerProp("Windows", "use_hide_faces_panel",
279 "Use HideFaces panel in operations", Config_Prop::Boolean, "false");
282 //******************************************************
283 PartSet_Module::~PartSet_Module()
286 delete myOverconstraintListener;
290 //******************************************************
291 void PartSet_Module::createFeatures()
293 ModuleBase_IModule::createFeatures();
294 myRoot = new PartSet_RootNode();
295 myRoot->setWorkshop(workshop());
299 //******************************************************
300 void PartSet_Module::storeSelection()
302 // cash is used only to restore selection, so it should be filled in storeSelection and
303 // after applying immediatelly cleared in restoreSelection
304 myCurrentSelection.clear();
305 sketchMgr()->storeSelection(PartSet_SketcherMgr::ST_SelectType, myCurrentSelection);
308 //******************************************************
309 void PartSet_Module::restoreSelection()
311 // cash is used only to restore selection, so it should be filled in storeSelection and
312 // after applying immediatelly cleared in restoreSelection
313 sketchMgr()->restoreSelection(myCurrentSelection);
314 myCurrentSelection.clear();
317 //******************************************************
318 void PartSet_Module::registerValidators()
320 //Registering of validators
321 SessionPtr aMgr = ModelAPI_Session::get();
322 ModelAPI_ValidatorsFactory* aFactory = aMgr->validators();
323 aFactory->registerValidator("PartSet_DistanceSelection", new PartSet_DistanceSelection);
324 aFactory->registerValidator("PartSet_LengthSelection", new PartSet_LengthSelection);
325 aFactory->registerValidator("PartSet_PerpendicularSelection", new PartSet_PerpendicularSelection);
326 aFactory->registerValidator("PartSet_ParallelSelection", new PartSet_ParallelSelection);
327 aFactory->registerValidator("PartSet_RadiusSelection", new PartSet_RadiusSelection);
328 aFactory->registerValidator("PartSet_RigidSelection", new PartSet_RigidSelection);
329 aFactory->registerValidator("PartSet_CoincidentSelection", new PartSet_CoincidentSelection);
330 aFactory->registerValidator("PartSet_HVDirSelection", new PartSet_HVDirSelection);
331 aFactory->registerValidator("PartSet_TangentSelection", new PartSet_TangentSelection);
332 aFactory->registerValidator("PartSet_FilletSelection", new PartSet_FilletSelection);
333 aFactory->registerValidator("PartSet_AngleSelection", new PartSet_AngleSelection);
334 aFactory->registerValidator("PartSet_EqualSelection", new PartSet_EqualSelection);
335 aFactory->registerValidator("PartSet_CollinearSelection", new PartSet_CollinearSelection);
336 aFactory->registerValidator("PartSet_MiddlePointSelection", new PartSet_MiddlePointSelection);
337 aFactory->registerValidator("PartSet_DifferentObjects", new PartSet_DifferentObjectsValidator);
338 aFactory->registerValidator("PartSet_DifferentPoints", new PartSet_DifferentPointsValidator);
339 aFactory->registerValidator("PartSet_CoincidentAttr", new PartSet_CoincidentAttr);
340 aFactory->registerValidator("PartSet_MultyTranslationSelection",
341 new PartSet_MultyTranslationSelection);
342 aFactory->registerValidator("PartSet_SplitSelection", new PartSet_SplitSelection);
343 aFactory->registerValidator("PartSet_ProjectionSelection", new PartSet_ProjectionSelection);
344 aFactory->registerValidator("PartSet_IntersectionSelection", new PartSet_IntersectionSelection);
347 //******************************************************
348 void PartSet_Module::connectToPropertyPanel(ModuleBase_ModelWidget* theWidget,
349 const bool isToConnect)
351 mySketchMgr->connectToPropertyPanel(theWidget, isToConnect);
354 //******************************************************
355 void PartSet_Module::operationCommitted(ModuleBase_Operation* theOperation)
357 if (sketchMgr()->isNestedSketchOperation(theOperation)) {
358 mySketchMgr->commitNestedSketch(theOperation);
360 /// deactivate of overconstraint listener should be performed after Sketch commit (#2176)
361 if (PartSet_SketcherMgr::isSketchOperation(theOperation))
362 overconstraintListener()->setActive(false);
364 /// Restart sketcher operations automatically
365 if (!mySketchReentrantMgr->operationCommitted(theOperation)) {
366 getWorkshop()->selector()->clearSelection();
370 //******************************************************
371 void PartSet_Module::operationAborted(ModuleBase_Operation* theOperation)
373 /// Restart sketcher operations automatically
374 mySketchReentrantMgr->operationAborted(theOperation);
375 /// deactivate of overconstraint listener should be performed after Sketch abort (#2176)
376 if (PartSet_SketcherMgr::isSketchOperation(theOperation))
377 overconstraintListener()->setActive(false);
379 getWorkshop()->selector()->clearSelection();
382 //******************************************************
383 void PartSet_Module::operationStarted(ModuleBase_Operation* theOperation)
385 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>
388 XGUI_Workshop* aWorkshop = XGUI_Tools::workshop(workshop());
389 XGUI_PropertyPanel* aPropertyPanel = aWorkshop->propertyPanel();
391 ModuleBase_ModelWidget* aFilledWidget = 0;
392 bool aPostonedWidgetActivation = false;
394 FeaturePtr aFeature = aFOperation->feature();
395 /// Restart sketcher operations automatically
396 /// it is important to call method of sketch reentrant manager before filling of PP
397 /// because it fills some created feature attributes, these new values should be used
398 /// to fill the property panel
399 mySketchReentrantMgr->operationStarted(theOperation);
401 aWorkshop->fillPropertyPanel(aFOperation);
402 // filling the operation values by the current selection
403 // if the operation can be committed after the controls filling, the method perform should
404 // be stopped. Otherwise unnecessary presentations can be shown(e.g. operation prs in sketch)
405 bool isOperationCommitted = false;
406 if (!aFOperation->isEditOperation()) {
407 std::string aGreedAttributeId = ModuleBase_Tools::findGreedAttribute(workshop(), aFeature);
408 // if there is a greed attribute, automatic commit by preselection
409 // for this feature is prohibited
410 aFilledWidget = aFOperation->activateByPreselection(aGreedAttributeId);
411 if (currentOperation() != aFOperation)
412 isOperationCommitted = true;
414 if (aGreedAttributeId.empty()) {
415 // a signal should be emitted before the next widget activation
416 // because, the activation of the next widget will give a focus to the widget.
417 // As a result the value of the widget is initialized.
418 // And commit may happens until the value is entered.
420 if (mySketchReentrantMgr->canBeCommittedByPreselection())
421 isOperationCommitted = mySketchMgr->operationActivatedByPreselection();
422 // activate the next obligatory widget
423 if (!isOperationCommitted)
424 aPropertyPanel->activateNextWidget(aFilledWidget);
427 else { // there is a greed widget
428 const QList<ModuleBase_ModelWidget*>& aWidgets = aPropertyPanel->modelWidgets();
429 std::string aFirstAttributeId = aWidgets.front()->attributeID();
430 // activate next widget after greeded if it is the first widget in the panel
431 // else the first panel widget is already activated by operation start
432 if (aFirstAttributeId == aGreedAttributeId)
433 aPostonedWidgetActivation = true;
436 } if (!isOperationCommitted) {
437 aWorkshop->connectToPropertyPanel(true);
438 updateSketcherOnStart(aFOperation);
439 updatePresentationsOnStart(aFOperation);
441 // the objects of the current operation should be deactivated
442 QObjectPtrList anObjects;
443 anObjects.append(aFeature);
444 std::list<ResultPtr> aResults;
445 ModelAPI_Tools::allResults(aFeature, aResults);
446 std::list<ResultPtr>::const_iterator aIt;
447 for (aIt = aResults.begin(); aIt != aResults.end(); ++aIt) {
448 anObjects.append(*aIt);
450 QObjectPtrList::const_iterator anIt = anObjects.begin(), aLast = anObjects.end();
451 for (; anIt != aLast; anIt++)
452 aWorkshop->deactivateActiveObject(*anIt, false);
453 if (anObjects.size() > 0) {
454 XGUI_Displayer* aDisplayer = aWorkshop->displayer();
455 aDisplayer->updateViewer();
457 /// state of command actions should be updated after displayed objects modification because
458 /// deactivation(for example) of objects may influence on selection in the viewer
459 /// State of command actions may depend on selection in the viewer(e.g. Sketch)
460 workshop()->updateCommandStatus();
462 if (aPostonedWidgetActivation) {
463 // if the widget is an empty in the chain of activated widgets, the current operation
464 // is restarted. It should be performed after functionality of the operation starting
465 aPropertyPanel->activateNextWidget(aFilledWidget);
470 //******************************************************
471 void PartSet_Module::updateSketcherOnStart(ModuleBase_Operation* theOperation)
473 if (PartSet_SketcherMgr::isSketchOperation(theOperation)) {
474 mySketchMgr->startSketch(theOperation);
476 // It is switched off because of
477 // Task #3067: 5.2.2 Drawing in the sketcher: change the mouse cursor arrow
478 else if (sketchMgr()->isNestedSketchOperation(theOperation)) {
479 mySketchMgr->startNestedSketch(theOperation);
483 //******************************************************
484 void PartSet_Module::updatePresentationsOnStart(ModuleBase_Operation* theOperation)
486 ModuleBase_OperationFeature* aFOperation =
487 dynamic_cast<ModuleBase_OperationFeature*>(theOperation);
489 myCustomPrs->activate(aFOperation->feature(), ModuleBase_IModule::CustomizeArguments, false);
490 myCustomPrs->activate(aFOperation->feature(), ModuleBase_IModule::CustomizeResults, false);
494 //******************************************************
495 void PartSet_Module::operationResumed(ModuleBase_Operation* theOperation)
497 ModuleBase_IModule::operationResumed(theOperation);
499 ModuleBase_OperationFeature* aFOperation =
500 dynamic_cast<ModuleBase_OperationFeature*>(theOperation);
502 myCustomPrs->activate(aFOperation->feature(), ModuleBase_IModule::CustomizeArguments, false);
503 myCustomPrs->activate(aFOperation->feature(), ModuleBase_IModule::CustomizeResults, false);
507 //******************************************************
508 void PartSet_Module::operationStopped(ModuleBase_Operation* theOperation)
510 bool isModifiedArgs = myCustomPrs->deactivate(ModuleBase_IModule::CustomizeArguments, false);
511 bool isModifiedResults = myCustomPrs->deactivate(ModuleBase_IModule::CustomizeResults, false);
512 bool isModified = isModifiedArgs || isModifiedResults;
514 if (sketchMgr()->isNestedSketchOperation(theOperation)) {
515 mySketchMgr->stopNestedSketch(theOperation);
517 else if (PartSet_SketcherMgr::isSketchOperation(theOperation))
518 setDefaultConstraintShown();
520 //VSV: Viewer is updated on feature update and redisplay
522 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(myWorkshop);
523 XGUI_Displayer* aDisplayer = aConnector->workshop()->displayer();
524 aDisplayer->updateViewer();
527 QMap<PartSet_Tools::ConstraintVisibleState, bool>::const_iterator
528 anIt = myHasConstraintShown.begin(), aLast = myHasConstraintShown.end();
529 for (; anIt != aLast; anIt++) {
530 mySketchMgr->updateBySketchParameters(anIt.key(), anIt.value());
534 //******************************************************
535 ModuleBase_Operation* PartSet_Module::currentOperation() const
537 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
538 XGUI_OperationMgr* anOpMgr = aConnector->workshop()->operationMgr();
539 return anOpMgr->currentOperation();
542 //******************************************************
543 bool PartSet_Module::canUndo() const
545 bool aCanUndo = false;
546 SessionPtr aMgr = ModelAPI_Session::get();
547 if (aMgr->hasModuleDocument() && aMgr->canUndo()) {
548 aCanUndo = !aMgr->isOperation();
549 if (!aCanUndo) // check the enable state additionally by sketch manager
550 aCanUndo = aMgr->canUndo();
555 //******************************************************
556 bool PartSet_Module::canRedo() const
558 bool aCanRedo = false;
559 SessionPtr aMgr = ModelAPI_Session::get();
560 if (aMgr->hasModuleDocument() && aMgr->canRedo()) {
561 aCanRedo = !aMgr->isOperation();
562 if (!aCanRedo) // check the enable state additionally by sketch manager
563 aCanRedo = aMgr->canRedo();
568 //******************************************************
569 bool PartSet_Module::canApplyAction(const ObjectPtr& theObject, const QString& theActionId) const
572 if (theActionId == "MOVE_CMD" || theActionId == "MOVE_SPLIT_CMD") {
573 FeaturePtr aFeature = ModelAPI_Feature::feature(theObject);
575 ResultPtr aResult = ModuleBase_Tools::firstResult(aFeature);
576 // part features can not be moved in the history.
577 if (aResult.get() && aResult->groupName() == ModelAPI_ResultPart::group())
584 //******************************************************
585 bool PartSet_Module::canEraseObject(const ObjectPtr& theObject) const
587 // the sketch manager put the restriction to the objects erase
588 return mySketchMgr->canEraseObject(theObject);
591 //******************************************************
592 bool PartSet_Module::canDisplayObject(const ObjectPtr& theObject) const
594 // the sketch manager put the restriction to the objects display
595 return mySketchMgr->canDisplayObject(theObject);
598 //******************************************************
599 bool PartSet_Module::canUsePreselection(const QString& thePreviousOperationKind,
600 const QString& theStartedOperationKind)
602 if (ModuleBase_IModule::canUsePreselection(thePreviousOperationKind, theStartedOperationKind))
605 return mySketchMgr->isNestedSketchFeature(theStartedOperationKind);
608 /*void PartSet_Module::processHiddenObject(const std::list<ObjectPtr>& theObjects)
610 mySketchMgr->processHiddenObject(theObjects);
613 //******************************************************
614 bool PartSet_Module::canActivateSelection(const ObjectPtr& theObject) const
616 bool aCanActivate = ModuleBase_IModule::canActivateSelection(theObject);
618 ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
619 bool isSketchOp = PartSet_SketcherMgr::isSketchOperation(anOperation),
620 isNestedOp = sketchMgr()->isNestedSketchOperation(anOperation);
621 if (isSketchOp || isNestedOp) {
622 // in active sketch operation it is possible to activate operation object in selection
623 // in the edit operation, e.g. points of the line can be moved when the line is edited
624 ModuleBase_OperationFeature* aFOperation =
625 dynamic_cast<ModuleBase_OperationFeature*>(anOperation);
626 aCanActivate = aCanActivate || (aFOperation && aFOperation->isEditOperation());
631 //******************************************************
632 bool PartSet_Module::addViewerMenu(const QMap<QString, QAction*>& theStdActions,
634 QMap<int, QAction*>& theMenuActions) const
636 return myMenuMgr->addViewerMenu(theStdActions, theParent, theMenuActions);
639 //******************************************************
640 void PartSet_Module::updateViewerMenu(const QMap<QString, QAction*>& theStdActions)
642 myMenuMgr->updateViewerMenu(theStdActions);
645 //******************************************************
646 bool PartSet_Module::isActionEnableStateFixed(const int theActionId) const
648 bool isEnabledFixed = false;
649 if (theActionId == XGUI_ActionsMgr::AcceptAll &&
650 mySketchReentrantMgr->isInternalEditActive())
651 isEnabledFixed = true;
652 return isEnabledFixed;
655 //******************************************************
656 QString PartSet_Module::getFeatureError(const FeaturePtr& theFeature)
658 QString anError = ModuleBase_IModule::getFeatureError(theFeature);
659 if (anError.isEmpty())
660 anError = sketchMgr()->getFeatureError(theFeature);
665 //******************************************************
666 void PartSet_Module::grantedOperationIds(ModuleBase_Operation* theOperation,
667 QStringList& theIds) const
669 myMenuMgr->grantedOperationIds(theOperation, theIds);
671 if (PartSet_SketcherMgr::isSketchOperation(theOperation)) {
672 XGUI_Workshop* aWorkshop = getWorkshop();
673 theIds.append(aWorkshop->contextMenuMgr()->action("DELETE_CMD")->text());
677 //******************************************************
678 void PartSet_Module::activeSelectionModes(QIntList& theModes)
680 if (mySketchMgr->activeSketch().get())
681 PartSet_SketcherMgr::sketchSelectionModes(mySketchMgr->activeSketch(), theModes);
683 theModes = XGUI_Tools::workshop(myWorkshop)->viewerSelectionModes();
686 //******************************************************
687 void PartSet_Module::moduleSelectionModes(int theModesType, QIntList& theModes)
689 customSubShapesSelectionModes(theModes);
690 //theModes.append(XGUI_Tools::workshop(myWorkshop)->viewerSelectionModes());
691 //myWorkshop->module()->activeSelectionModes(theModes);
694 //******************************************************
695 void PartSet_Module::moduleSelectionFilters(const QIntList& theFilterTypes,
696 SelectMgr_ListOfFilter& theSelectionFilters)
698 bool isSketchActive = mySketchMgr->activeSketch().get();
700 std::map<ModuleBase_SelectionFilterType, Handle(SelectMgr_Filter)>::const_iterator aFiltersIt =
701 mySelectionFilters.begin();
702 for (; aFiltersIt != mySelectionFilters.end(); aFiltersIt++) {
703 int aFilterType = aFiltersIt->first;
704 // do not add not participating filters in given parameters
705 if (!theFilterTypes.contains(aFilterType))
708 // using sketch filters only if sketch operation is active
709 if (!isSketchActive &&
710 mySketchMgr->sketchSelectionFilter((ModuleBase_SelectionFilterType)aFilterType))
713 // using filtering of construction results only from faces panel
714 if (aFilterType == SF_ResultGroupNameFilter)
717 theSelectionFilters.Append(aFiltersIt->second);
721 //******************************************************
722 void PartSet_Module::customSubShapesSelectionModes(QIntList& theModes)
724 if (theModes.contains(TopAbs_FACE))
725 theModes.append(SketcherPrs_Tools::Sel_Sketch_Face);
726 if (theModes.contains(TopAbs_WIRE))
727 theModes.append(SketcherPrs_Tools::Sel_Sketch_Wire);
729 if (mySketchMgr->activeSketch().get())
730 PartSet_SketcherMgr::sketchSelectionModes(mySketchMgr->activeSketch(), theModes);
733 //******************************************************
734 void PartSet_Module::getGeomSelection(const std::shared_ptr<ModuleBase_ViewerPrs>& theSelected,
735 ObjectPtr& theObject, AttributePtr& theAttribute)
737 ObjectPtr anObject = theSelected->object();
738 GeomShapePtr aShape = theSelected->shape();
740 theAttribute = findAttribute(anObject, aShape);
741 // TODO: try to create result if object is an external object
742 theObject = anObject;
745 //******************************************************
746 bool PartSet_Module::isMouseOverWindow()
748 return mySketchMgr->isMouseOverWindow();
751 //******************************************************
752 bool PartSet_Module::isSketchNeutralPointActivated() const
754 bool isNeutralPoint = true;
755 if (sketchReentranceMgr()->isInternalEditActive())
756 isNeutralPoint = false;
757 if (myIsOperationIsLaunched)
758 isNeutralPoint = false;
760 return isNeutralPoint;
763 //******************************************************
764 void PartSet_Module::closeDocument()
766 myActivePartIndex = QModelIndex();
767 SketcherPrs_PositionMgr::get()->clearAll();
770 //******************************************************
771 void PartSet_Module::clearViewer()
773 myCustomPrs->clearPrs();
775 XGUI_Workshop* aWorkshop = getWorkshop();
776 XGUI_Displayer* aDisplayer = aWorkshop->displayer();
777 aDisplayer->deactivateSelectionFilters(false);
780 //******************************************************
781 void PartSet_Module::propertyPanelDefined(ModuleBase_Operation* theOperation)
783 ModuleBase_OperationFeature* aFOperation =
784 dynamic_cast<ModuleBase_OperationFeature*>(theOperation);
788 ModuleBase_IPropertyPanel* aPanel = aFOperation->propertyPanel();
789 // we have to manually activate the sketch label in edit mode
790 if (PartSet_SketcherMgr::isSketchOperation(aFOperation) && (aFOperation->isEditOperation()))
791 aPanel->activateWidget(aPanel->modelWidgets().first());
794 //******************************************************
795 bool PartSet_Module::createWidgets(const FeaturePtr& theFeature, const QString& theXmlRepr,
796 QList<ModuleBase_ModelWidget*>& theWidgets) const
798 bool aProcessed = false;
800 XGUI_Workshop* aWorkshop = getWorkshop();
801 XGUI_PropertyPanel* aPropertyPanel = aWorkshop->propertyPanel();
802 if (mySketchMgr->activeSketch().get() && aPropertyPanel) {
803 ModuleBase_ISelection* aSelection = workshop()->selection();
804 // click on a point in sketch leads here with the point is highlighted, not yet selected
805 QList<ModuleBase_ViewerPrsPtr> aPreselection = aSelection->getHighlighted();
806 if (aPreselection.size() == 1) {
807 ModuleBase_ViewerPrsPtr aSelectedPrs = aPreselection[0];
808 ObjectPtr anObject = aSelectedPrs->object();
810 FeaturePtr aFeature = ModelAPI_Feature::feature(anObject);
811 GeomShapePtr aShape = aSelectedPrs->shape();
812 // click on the digit of dimension constrain comes here
813 // with an empty shape, so we need the check
814 if (aFeature == theFeature && aShape.get() && !aShape->isNull()) {
815 // if feature has only one result and shape of result is equal to selected shape
816 // this attribute is not processed. It is a case of Sketch Point.
817 if (aFeature->results().size() == 1) {
818 ResultPtr aResult = aFeature->results().front();
819 if (aResult.get() && aResult->shape()->isEqual(aShape))
822 const TopoDS_Shape& aTDShape = aShape->impl<TopoDS_Shape>();
823 std::pair<AttributePtr, int> anAttribute =
824 PartSet_Tools::findAttributeBy2dPoint(anObject, aTDShape, mySketchMgr->activeSketch());
825 if (anAttribute.first.get()) {
826 ModuleBase_WidgetFactory aFactory(theXmlRepr.toStdString(), workshop());
828 const std::string anAttributeId = anAttribute.first->id();
829 aFactory.createWidget(aPropertyPanel->contentWidget(), anAttributeId);
831 theWidgets = aFactory.getModelWidgets();
832 // it is possible that the point does not present in XML definition,
833 // in this case, we assume that it is not processed by this module
834 // e.g. "Intersection point" feature
835 aProcessed = !theWidgets.isEmpty();
843 //******************************************************
844 void PartSet_Module::onSelectionChanged()
846 ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
850 bool isSketcherOp = false;
851 // An edit operation is enable only if the current opeation is the sketch operation
852 if (mySketchMgr->activeSketch()) {
853 if (PartSet_Tools::sketchPlane(mySketchMgr->activeSketch()))
854 isSketcherOp = PartSet_SketcherMgr::isSketchOperation(aOperation);
857 // Editing of constraints can be done on selection
858 ModuleBase_ISelection* aSelect = myWorkshop->selection();
859 QList<ModuleBase_ViewerPrsPtr> aSelected = aSelect->getSelected();
860 if (aSelected.size() == 1) {
861 ModuleBase_ViewerPrsPtr aPrs = aSelected.first();
862 ObjectPtr aObject = aPrs->object();
863 FeaturePtr aFeature = ModelAPI_Feature::feature(aObject);
865 std::string aId = aFeature->getKind();
866 if ((aId == SketchPlugin_ConstraintRadius::ID()) ||
867 (aId == SketchPlugin_ConstraintLength::ID()) ||
868 (aId == SketchPlugin_ConstraintDistance::ID()) ||
869 (aId == SketchPlugin_ConstraintAngle::ID())) {
870 editFeature(aFeature);
877 //******************************************************
878 void PartSet_Module::onKeyRelease(ModuleBase_IViewWindow* theWnd, QKeyEvent* theEvent)
880 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
881 XGUI_OperationMgr* anOpMgr = aConnector->workshop()->operationMgr();
882 anOpMgr->onKeyReleased(theWnd->viewPort(), theEvent);
885 //******************************************************
886 ModuleBase_ModelWidget* PartSet_Module::createWidgetByType(const std::string& theType,
888 Config_WidgetAPI* theWidgetApi)
890 ModuleBase_IWorkshop* aWorkshop = workshop();
891 ModuleBase_ModelWidget* aWgt = NULL;
892 if (theType == "sketch-start-label") {
893 PartSet_WidgetSketchLabel* aLabelWgt = new PartSet_WidgetSketchLabel(theParent, aWorkshop,
894 theWidgetApi, myHasConstraintShown);
895 connect(aLabelWgt, SIGNAL(planeSelected(const std::shared_ptr<GeomAPI_Pln>&)),
896 mySketchMgr, SLOT(onPlaneSelected(const std::shared_ptr<GeomAPI_Pln>&)));
897 connect(aLabelWgt, SIGNAL(showConstraintToggled(int, bool)),
898 mySketchMgr, SLOT(onShowConstraintsToggle(int, bool)));
899 connect(aLabelWgt, SIGNAL(showFreePoints(bool)), mySketchMgr, SLOT(onShowPoints(bool)));
900 connect(aLabelWgt, SIGNAL(autoConstraints(bool)),
901 sketchReentranceMgr(), SLOT(onAutoConstraints(bool)));
902 aLabelWgt->setShowPointsState(mySketchMgr->isShowFreePointsShown());
904 } else if (theType == "sketch-2dpoint_selector") {
905 PartSet_WidgetPoint2D* aPointWgt = new PartSet_WidgetPoint2D(theParent, aWorkshop,
907 aPointWgt->setSketch(mySketchMgr->activeSketch());
908 connect(aPointWgt, SIGNAL(vertexSelected()), sketchReentranceMgr(), SLOT(onVertexSelected()));
910 }else if (theType == "sketch-2dpoint_flyout_selector") {
911 PartSet_WidgetPoint2DFlyout* aPointWgt = new PartSet_WidgetPoint2DFlyout(theParent, aWorkshop,
913 aPointWgt->setSketch(mySketchMgr->activeSketch());
914 connect(aPointWgt, SIGNAL(vertexSelected()), sketchReentranceMgr(), SLOT(onVertexSelected()));
916 } else if (theType == "sketch_shape_selector") {
917 PartSet_WidgetShapeSelector* aShapeSelectorWgt =
918 new PartSet_WidgetShapeSelector(theParent, aWorkshop, theWidgetApi);
919 aShapeSelectorWgt->setSketcher(mySketchMgr->activeSketch());
920 aWgt = aShapeSelectorWgt;
921 } else if (theType == "sketch_multi_selector") {
922 PartSet_WidgetMultiSelector* aShapeSelectorWgt =
923 new PartSet_WidgetMultiSelector(theParent, aWorkshop, theWidgetApi);
924 aShapeSelectorWgt->setSketcher(mySketchMgr->activeSketch());
925 aWgt = aShapeSelectorWgt;
927 else if (theType == "sketch_feature_point_selector") {
928 PartSet_WidgetFeaturePointSelector* aPointSelectorWgt =
929 new PartSet_WidgetFeaturePointSelector(theParent, aWorkshop, theWidgetApi);
930 aPointSelectorWgt->setSketcher(mySketchMgr->activeSketch());
931 aWgt = aPointSelectorWgt;
933 else if (theType == "sketch-bspline_selector") {
934 PartSet_WidgetBSplinePoints* aBSplineWgt =
935 new PartSet_WidgetBSplinePoints(theParent, aWorkshop, theWidgetApi);
936 aBSplineWgt->setSketch(mySketchMgr->activeSketch());
939 else if (theType == WDG_DOUBLEVALUE_EDITOR) {
940 aWgt = new PartSet_WidgetEditor(theParent, aWorkshop, theWidgetApi);
941 } else if (theType == "export_file_selector") {
942 aWgt = new PartSet_WidgetFileSelector(theParent, aWorkshop, theWidgetApi);
943 } else if (theType == "sketch_launcher") {
944 aWgt = new PartSet_WidgetSketchCreator(theParent, this, theWidgetApi);
946 else if (theType == "module_choice") {
947 aWgt = new ModuleBase_WidgetChoice(theParent, theWidgetApi);
948 connect(aWgt, SIGNAL(itemSelected(ModuleBase_ModelWidget*, int)),
949 this, SLOT(onChoiceChanged(ModuleBase_ModelWidget*, int)));
950 } else if (theType == "bspline-panel") {
951 PartSet_BSplineWidget* aPanel = new PartSet_BSplineWidget(theParent, theWidgetApi);
952 //aPanel->setFeature(theFeature);
958 //******************************************************
959 ModuleBase_ModelWidget* PartSet_Module::activeWidget() const
961 ModuleBase_ModelWidget* anActiveWidget = 0;
963 ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
965 return anActiveWidget;
967 ModuleBase_IPropertyPanel* aPanel = aOperation->propertyPanel();
969 return anActiveWidget;
971 return aPanel->activeWidget(true);
974 //******************************************************
975 bool PartSet_Module::deleteObjects()
977 bool isProcessed = false;
979 XGUI_Workshop* aWorkshop = getWorkshop();
980 XGUI_OperationMgr* anOpMgr = aWorkshop->operationMgr();
982 //SessionPtr aMgr = ModelAPI_Session::get();
983 // 1. check whether the delete should be processed in the module
984 ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
985 bool isSketchOp = PartSet_SketcherMgr::isSketchOperation(anOperation),
986 isNestedOp = sketchMgr()->isNestedSketchOperation(anOperation);
987 if (isSketchOp || isNestedOp) {
989 // 2. find selected presentations
990 // selected objects should be collected before the current operation abort because
991 // the abort leads to selection lost on constraint objects. It can be corrected after #386 issue
992 ModuleBase_ISelection* aSel = workshop()->selection();
993 QObjectPtrList aSelectedObj = aSel->selectedPresentations();
994 // if there are no selected objects in the viewer, that means that the selection in another
995 // place cased this method. It is necessary to return the false value to understande in above
996 // method that delete is not processed
997 if (aSelectedObj.count() == 0)
1000 // avoid delete of the objects, which are not belong to the current sketch
1001 // in order to do not delete results of other sketches
1002 QObjectPtrList aSketchObjects;
1003 QObjectPtrList::const_iterator anIt = aSelectedObj.begin(), aLast = aSelectedObj.end();
1004 for ( ; anIt != aLast; anIt++) {
1005 ObjectPtr anObject = *anIt;
1006 if (mySketchMgr->isObjectOfSketch(anObject)) {
1007 // sketch feature should be used in this list because workshop deletes features only
1008 // results are skipped
1009 FeaturePtr aSketchFeature = ModelAPI_Feature::feature(anObject);
1010 aSketchObjects.append(aSketchFeature);
1013 // if the selection contains only local selected presentations from other sketches,
1014 // the Delete operation should not be done at all
1015 if (aSketchObjects.size() == 0)
1018 // 3. start operation
1019 QString aDescription = aWorkshop->contextMenuMgr()->action("DELETE_CMD")->text();
1020 ModuleBase_Operation* anOpAction = new ModuleBase_Operation(aDescription, this);
1022 // the active nested sketch operation should be aborted unconditionally
1023 // the Delete action should be additionally granted for the Sketch operation
1024 // in order to do not abort/commit it
1026 if (!anOpMgr->canStartOperation(anOpAction->id(), isCommitted))
1027 return true; // the objects are processed but can not be deleted
1029 anOpMgr->startOperation(anOpAction);
1031 // WORKAROUND, should be done to avoid viewer highlight update after deletetion of objects
1032 // the problem is in AIS Dimensions recompute
1033 // if a line and the dim are removed, line is the first
1034 // it causes the AIS recompute, where the base line is null,
1035 // the result is empty AIS in the viewer
1036 XGUI_Tools::workshop(myWorkshop)->selector()->clearSelection();
1038 // 4. delete features
1039 // sketch feature should be skipped, only sub-features can be removed
1040 // when sketch operation is active
1041 aWorkshop->deleteFeatures(aSketchObjects);
1042 // 5. stop operation
1043 anOpMgr->commitOperation();
1048 //******************************************************
1049 void PartSet_Module::editFeature(FeaturePtr theFeature)
1051 storeConstraintsState(theFeature->getKind());
1052 ModuleBase_IModule::editFeature(theFeature);
1055 //******************************************************
1056 bool PartSet_Module::canCommitOperation() const
1061 //******************************************************
1062 void PartSet_Module::launchOperation(const QString& theCmdId, const bool& isStartAfterCommitOnly)
1064 myIsOperationIsLaunched = true;
1065 storeConstraintsState(theCmdId.toStdString());
1066 updateConstraintsState(theCmdId.toStdString());
1068 ModuleBase_IModule::launchOperation(theCmdId, isStartAfterCommitOnly);
1070 myIsOperationIsLaunched = false;
1073 //******************************************************
1074 void PartSet_Module::storeConstraintsState(const std::string& theFeatureKind)
1076 if (myWorkshop->currentOperation() &&
1077 myWorkshop->currentOperation()->id().toStdString() == SketchPlugin_Sketch::ID()) {
1078 const QMap<PartSet_Tools::ConstraintVisibleState, bool>& aShownStates =
1079 mySketchMgr->showConstraintStates();
1080 myHasConstraintShown = aShownStates;
1084 //******************************************************
1085 void PartSet_Module::updateConstraintsState(const std::string& theFeatureKind)
1087 if (PartSet_SketcherMgr::constraintsIdList().contains(theFeatureKind.c_str()) ||
1088 PartSet_SketcherMgr::replicationsIdList().contains(theFeatureKind.c_str())) {
1089 // Show constraints if a constraint was anOperation
1090 mySketchMgr->updateBySketchParameters(PartSet_Tools::Geometrical, true);
1091 mySketchMgr->updateBySketchParameters(PartSet_Tools::Dimensional, true);
1092 mySketchMgr->updateBySketchParameters(PartSet_Tools::Expressions,
1093 myHasConstraintShown[PartSet_Tools::Expressions]);
1097 //******************************************************
1098 void PartSet_Module::onObjectDisplayed(ObjectPtr theObject, AISObjectPtr theAIS)
1100 Handle(AIS_InteractiveObject) anAIS = theAIS->impl<Handle(AIS_InteractiveObject)>();
1101 if (!anAIS.IsNull()) {
1102 FeaturePtr aFeature = ModelAPI_Feature::feature(theObject);
1103 if (aFeature.get()) {
1104 bool aToUseZLayer = false;
1105 if (PartSet_Tools::findRefsToMeFeature(aFeature,SketchPlugin_Projection::ID()))
1106 aToUseZLayer = true;
1108 CompositeFeaturePtr aParent = ModelAPI_Tools::compositeOwner(aFeature);
1109 aToUseZLayer = (aParent.get() && (aParent->getKind() == SketchPlugin_Sketch::ID()));
1112 Handle(AIS_InteractiveContext) aCtx = anAIS->GetContext();
1113 if (aFeature->getKind() == SketchPlugin_ConstraintCoincidence::ID())
1114 aCtx->SetZLayer(anAIS, Graphic3d_ZLayerId_Top);
1116 aCtx->SetZLayer(anAIS, myVisualLayerId);
1122 //******************************************************
1123 void PartSet_Module::onBeforeObjectErase(ObjectPtr theObject, AISObjectPtr theAIS)
1126 // it should be recomputed in order to disappear in the viewer if the corresponded object
1128 //if (myCustomPrs->isActive())
1129 // myCustomPrs->redisplay(theObject, false);
1132 //******************************************************
1133 void PartSet_Module::onViewTransformed(int theTrsfType)
1135 // Set length of arrows constant in pixel size
1136 // if the operation is panning or rotate or panglobal then do nothing
1137 if ((theTrsfType == 1) || (theTrsfType == 3) || (theTrsfType == 4))
1139 ModuleBase_IViewer* aViewer = myWorkshop->viewer();
1140 Handle(AIS_InteractiveContext) aContext = aViewer->AISContext();
1141 if (aContext.IsNull())
1144 //Handle(V3d_View) aView = aViewer->activeView();
1146 XGUI_Workshop* aWorkshop = getWorkshop();
1147 XGUI_Displayer* aDisplayer = aWorkshop->displayer();
1148 Handle(V3d_Viewer) aV3dViewer = aContext->CurrentViewer();
1149 Handle(V3d_View) aView;
1151 for (aV3dViewer->InitDefinedViews();
1152 aV3dViewer->MoreDefinedViews();
1153 aV3dViewer->NextDefinedViews()) {
1154 Handle(V3d_View) aV = aV3dViewer->DefinedView();
1155 double aS = aV->Scale();
1164 bool isModified = false;
1165 double aLen = aView->Convert(SketcherPrs_Tools::getConfigArrowSize());
1166 ModuleBase_Operation* aCurrentOperation = myWorkshop->currentOperation();
1167 if (aCurrentOperation &&
1168 (PartSet_SketcherMgr::isSketchOperation(aCurrentOperation) ||
1169 sketchMgr()->isNestedSketchOperation(aCurrentOperation) ||
1170 (aCurrentOperation->id() == "Measurement")))
1172 SketcherPrs_Tools::setArrowSize(aLen);
1173 const double aCurScale = aViewer->activeView()->Camera()->Scale();
1174 aViewer->SetScale(aViewer->activeView(), aCurScale);
1176 QList<Handle(AIS_InteractiveObject)> aPrsList = aDisplayer->displayedPresentations();
1177 foreach(Handle(AIS_InteractiveObject) aAisObj, aPrsList) {
1179 QList<AISObjectPtr> aPrsList = aDisplayer->displayedPresentations();
1180 foreach(AISObjectPtr aAIS, aPrsList) {
1181 Handle(AIS_InteractiveObject) aAisObj = aAIS->impl<Handle(AIS_InteractiveObject)>();
1183 Handle(AIS_Dimension) aDim = Handle(AIS_Dimension)::DownCast(aAisObj);
1184 if (!aDim.IsNull()) {
1185 aDim->DimensionAspect()->ArrowAspect()->SetLength(aLen);
1186 aContext->Redisplay(aDim, false);
1192 // Manage trihedron arrows
1193 if (Config_PropManager::boolean("Visualization", "zoom_trihedron_arrows")) {
1194 Handle(AIS_Trihedron) aTrihedron = aViewer->trihedron();
1195 if (!aTrihedron.IsNull()) {
1197 aView->Convert(Config_PropManager::integer("Visualization", "axis_arrow_size"));
1198 Handle(Prs3d_DatumAspect) aDatumAspect = aTrihedron->Attributes()->DatumAspect();
1199 double aAxisLen = aDatumAspect->AxisLength(Prs3d_DP_XAxis);
1200 aDatumAspect->SetAttribute(Prs3d_DP_ShadingConeLengthPercent, aAxLen / aAxisLen);
1201 aTrihedron->Attributes()->SetDatumAspect(aDatumAspect);
1202 aContext->Redisplay(aTrihedron, false);
1207 aDisplayer->updateViewer();
1210 //******************************************************
1211 bool PartSet_Module::isCustomPrsActivated(const ModuleBase_CustomizeFlag& theFlag) const
1213 return myCustomPrs->isActive(theFlag);
1216 //******************************************************
1217 void PartSet_Module::activateCustomPrs(const FeaturePtr& theFeature,
1218 const ModuleBase_CustomizeFlag& theFlag,
1219 const bool theUpdateViewer)
1221 myCustomPrs->activate(theFeature, theFlag, theUpdateViewer);
1224 //******************************************************
1225 void PartSet_Module::deactivateCustomPrs(const ModuleBase_CustomizeFlag& theFlag,
1226 const bool theUpdateViewer)
1228 myCustomPrs->deactivate(theFlag, theUpdateViewer);
1231 //******************************************************
1232 //bool PartSet_Module::customisePresentation(ResultPtr theResult, AISObjectPtr thePrs,
1233 // std::shared_ptr<GeomAPI_ICustomPrs> theCustomPrs)
1235 // bool aCustomized = false;
1237 // XGUI_Workshop* aWorkshop = getWorkshop();
1238 // XGUI_Displayer* aDisplayer = aWorkshop->displayer();
1239 // ObjectPtr anObject = aDisplayer->getObject(thePrs);
1241 // return aCustomized;
1243 // if (!theResult.get()) {
1244 // std::vector<int> aColor;
1245 // XGUI_CustomPrs::getDefaultColor(anObject, true, aColor);
1246 // if (!aColor.empty()) {
1247 // aCustomized = thePrs->setColor(aColor[0], aColor[1], aColor[2]);
1250 // // customize dimentional constrains
1251 // sketchMgr()->customisePresentation(anObject);
1253 // return aCustomized;
1256 ////******************************************************
1257 //bool PartSet_Module::afterCustomisePresentation(std::shared_ptr<ModelAPI_Result> theResult,
1258 // AISObjectPtr thePrs,
1259 // GeomCustomPrsPtr theCustomPrs)
1261 // bool aCustomized = false;
1263 // XGUI_Workshop* aWorkshop = getWorkshop();
1264 // XGUI_Displayer* aDisplayer = aWorkshop->displayer();
1265 // ObjectPtr anObject = aDisplayer->getObject(thePrs);
1267 // return aCustomized;
1269 // std::vector<int> aColor;
1270 // bool aUseCustomColor = true;
1271 // if (aUseCustomColor)
1272 // myOverconstraintListener->getCustomColor(anObject, aColor);
1273 // // customize sketch symbol presentation
1274 // Handle(AIS_InteractiveObject) anAISIO = thePrs->impl<Handle(AIS_InteractiveObject)>();
1275 // if (!anAISIO.IsNull()) {
1276 // if (!Handle(SketcherPrs_SymbolPrs)::DownCast(anAISIO).IsNull()) {
1277 // Handle(SketcherPrs_SymbolPrs) aPrs = Handle(SketcherPrs_SymbolPrs)::DownCast(anAISIO);
1278 // if (!aPrs.IsNull()) {
1279 // aPrs->SetCustomColor(aColor);
1280 // aCustomized = true;
1282 // } else if (!Handle(SketcherPrs_Coincident)::DownCast(anAISIO).IsNull()) {
1283 // Handle(SketcherPrs_Coincident) aPrs = Handle(SketcherPrs_Coincident)::DownCast(anAISIO);
1284 // if (!aPrs.IsNull()) {
1285 // aPrs->SetCustomColor(aColor);
1286 // aCustomized = true;
1290 // // customize sketch dimension constraint presentation
1291 // if (!aCustomized) {
1292 // if (!aColor.empty()) { // otherwise presentation has the default color
1293 // aCustomized = thePrs->setColor(aColor[0], aColor[1], aColor[2]);
1296 // return aCustomized;
1299 //******************************************************
1300 bool PartSet_Module::customizeFeature(ObjectPtr theObject, const ModuleBase_CustomizeFlag& theFlag,
1301 const bool theUpdateViewer)
1303 bool isRedisplayed = false;
1304 if (myCustomPrs->isActive(theFlag))
1305 isRedisplayed = myCustomPrs->redisplay(theObject, theFlag, theUpdateViewer);
1307 return isRedisplayed;
1310 //******************************************************
1311 void PartSet_Module::customizeObjectBrowser(QWidget* theObjectBrowser)
1313 XGUI_ObjectsBrowser* aOB = dynamic_cast<XGUI_ObjectsBrowser*>(theObjectBrowser);
1315 QLabel* aLabel = aOB->activeDocLabel();
1316 aLabel->installEventFilter(myMenuMgr);
1317 connect(aLabel, SIGNAL(customContextMenuRequested(const QPoint&)),
1318 SLOT(onActiveDocPopup(const QPoint&)));
1319 aOB->treeView()->setExpandsOnDoubleClick(false);
1320 connect(aOB->treeView(), SIGNAL(doubleClicked(const QModelIndex&)),
1321 SLOT(onTreeViewDoubleClick(const QModelIndex&)));
1323 Events_Loop* aLoop = Events_Loop::loop();
1324 aLoop->registerListener(this, Events_Loop::eventByName(EVENT_OBJECT_CREATED));
1328 //******************************************************
1329 void PartSet_Module::onActiveDocPopup(const QPoint& thePnt)
1331 SessionPtr aMgr = ModelAPI_Session::get();
1332 QAction* aActivatePartAction = myMenuMgr->action("ACTIVATE_PARTSET_CMD");
1334 XGUI_Workshop* aWorkshop = getWorkshop();
1335 QLabel* aHeader = aWorkshop->objectBrowser()->activeDocLabel();
1337 aActivatePartAction->setEnabled((aMgr->activeDocument() != aMgr->moduleDocument()));
1340 aMenu.addAction(aActivatePartAction);
1343 if (aMgr->activeDocument() == aMgr->moduleDocument()) {
1344 DocumentPtr aDoc = aMgr->moduleDocument();
1345 int aNbParts = aDoc->size(ModelAPI_ResultPart::group());
1346 bool aHaveToActivate = false;
1347 for (int i = 0; i < aNbParts; i++) {
1348 ObjectPtr aObj = aDoc->object(ModelAPI_ResultPart::group(), i);
1349 ResultPartPtr aPartRes = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aObj);
1350 if (!aPartRes->partDoc().get()) {
1351 aHaveToActivate = true;
1355 if (aHaveToActivate) {
1356 QAction* aActivateAllPartAction = myMenuMgr->action("ACTIVATE_ALL_PARTS_CMD");
1357 aMenu.addAction(aActivateAllPartAction);
1362 aMenu.exec(aHeader->mapToGlobal(thePnt));
1365 //******************************************************
1366 AISObjectPtr PartSet_Module::createPresentation(const ObjectPtr& theObject)
1368 Handle(AIS_InteractiveObject) anAISPrs = mySketchMgr->createPresentation(theObject);
1369 if (anAISPrs.IsNull()) {
1370 ResultPtr aResult = std::dynamic_pointer_cast<ModelAPI_Result>(theObject);
1371 if (aResult.get()) {
1372 std::shared_ptr<GeomAPI_Shape> aShapePtr = ModelAPI_Tools::shape(aResult);
1373 if (aShapePtr.get() != NULL)
1374 anAISPrs = new ModuleBase_ResultPrs(aResult);
1377 FieldStepPtr aStep =
1378 std::dynamic_pointer_cast<ModelAPI_ResultField::ModelAPI_FieldStep>(theObject);
1380 anAISPrs = new PartSet_FieldStepPrs(aStep);
1385 if (!anAISPrs.IsNull()) {
1386 Handle(AIS_Shape) aShapePrs = Handle(AIS_Shape)::DownCast(anAISPrs);
1387 if (!aShapePrs.IsNull())
1388 ModuleBase_Tools::setPointBallHighlighting((AIS_Shape*)aShapePrs.get());
1390 anAIS = AISObjectPtr(new GeomAPI_AISObject());
1391 anAIS->setImpl(new Handle(AIS_InteractiveObject)(anAISPrs));
1392 customizePresentation(theObject, anAIS);
1397 //******************************************************
1398 void getResultColor(const ResultPtr& theResult, std::vector<int>& theColor)
1400 ModelAPI_Tools::getColor(theResult, theColor);
1401 if (theColor.empty())
1402 PartSet_Tools::getDefaultColor(theResult, false, theColor);
1405 //******************************************************
1406 double getResultDeflection(const ResultPtr& theResult)
1408 double aDeflection = ModelAPI_Tools::getDeflection(theResult);
1409 if (aDeflection < 0)
1410 aDeflection = PartSet_Tools::getDefaultDeflection(theResult);
1414 //******************************************************
1415 double getResultTransparency(const ResultPtr& theResult)
1417 double aTransparency = ModelAPI_Tools::getTransparency(theResult);
1418 if (aTransparency < 0)
1419 aTransparency = PartSet_Tools::getDefaultTransparency();
1420 return aTransparency;
1424 //******************************************************
1425 void PartSet_Module::customizePresentation(const ObjectPtr& theObject,
1426 const AISObjectPtr& thePrs) const
1428 if (mySketchMgr->isObjectOfSketch(theObject)) {
1429 mySketchMgr->customizeSketchPresentation(theObject, thePrs);
1432 ResultPtr aResult = std::dynamic_pointer_cast<ModelAPI_Result>(theObject);
1433 if (aResult.get()) {
1434 std::vector<int> aColor;
1435 getResultColor(aResult, aColor);
1437 SessionPtr aMgr = ModelAPI_Session::get();
1438 if (aMgr->activeDocument() != aResult->document()) {
1439 QColor aQColor(aColor[0], aColor[1], aColor[2]);
1441 QColor::fromHsvF(aQColor.hueF(), aQColor.saturationF() / 3., aQColor.valueF());
1442 aColor[0] = aNewColor.red();
1443 aColor[1] = aNewColor.green();
1444 aColor[2] = aNewColor.blue();
1446 thePrs->setColor(aColor[0], aColor[1], aColor[2]);
1448 thePrs->setDeflection(getResultDeflection(aResult));
1450 thePrs->setTransparency(getResultTransparency(aResult));
1452 /// set texture parameters
1453 if(aResult->hasTextureFile())
1455 Handle(AIS_InteractiveObject) anAIS = thePrs->impl<Handle(AIS_InteractiveObject)>();
1456 if (!anAIS.IsNull())
1458 std::vector<int> aColor = {167, 167, 167 };
1459 thePrs->setColor(aColor[0], aColor[1], aColor[2]);
1460 Quantity_Color myShadingColor(NCollection_Vec3<float>(aColor[0]/255., aColor[1]/255., aColor[2]/255.));
1462 Handle(AIS_Shape) anAISShape = Handle(AIS_Shape)::DownCast(anAIS);
1463 if (!anAISShape.IsNull())
1465 auto myDrawer = new Prs3d_ShadingAspect();
1466 if (!anAISShape->Attributes()->HasOwnShadingAspect())
1468 anAISShape->Attributes()->SetShadingAspect (myDrawer);
1471 myDrawer->SetColor(myShadingColor);
1473 Handle(Image_PixMap) aPixmap;
1474 QPixmap px(aResult->getTextureFile().c_str());
1476 aPixmap = OCCViewer_Utilities::imageToPixmap( px.toImage() );
1478 anAISShape->Attributes()->ShadingAspect()->Aspect()->SetTextureMap
1479 (new Graphic3d_Texture2Dmanual(aPixmap));
1480 anAISShape->Attributes()->ShadingAspect()->Aspect()->SetTextureMapOn();
1482 anAISShape->SetDisplayMode(AIS_Shaded);
1487 FeaturePtr aFeature = ModelAPI_Feature::feature(theObject);
1488 if (aFeature.get()) {
1489 if (aFeature->getKind() == SketchPlugin_Sketch::ID())
1490 thePrs->setWidth(2);
1496 //******************************************************
1497 ObjectPtr PartSet_Module::findPresentedObject(const AISObjectPtr& theAIS) const
1500 ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
1502 /// If last line finished on vertex the lines creation sequence has to be break
1503 ModuleBase_IPropertyPanel* aPanel = aOperation->propertyPanel();
1505 ModuleBase_ModelWidget* anActiveWidget = aPanel->activeWidget();
1506 // if there is an active widget, find the presented object in it
1507 if (!anActiveWidget)
1508 anActiveWidget = aPanel->preselectionWidget();
1510 ModuleBase_WidgetValidated* aWidgetValidated = dynamic_cast<ModuleBase_WidgetValidated*>
1512 if (aWidgetValidated)
1513 anObject = aWidgetValidated->findPresentedObject(theAIS);
1519 //******************************************************
1520 bool PartSet_Module::canBeShaded(Handle(AIS_InteractiveObject) theAIS) const
1522 bool aCanBeShaged = true;
1524 Handle(PartSet_ResultSketchPrs) aPrs = Handle(PartSet_ResultSketchPrs)::DownCast(theAIS);
1526 aCanBeShaged = false;
1528 return aCanBeShaged;
1531 //******************************************************
1532 void PartSet_Module::addObjectBrowserMenu(QMenu* theMenu) const
1534 QObjectPtrList aObjects = myWorkshop->selection()->selectedObjects();
1535 int aSelected = aObjects.size();
1536 SessionPtr aMgr = ModelAPI_Session::get();
1537 QAction* aActivatePartAction = myMenuMgr->action("ACTIVATE_PART_CMD");
1539 bool hasResult = false;
1540 bool hasFeature = false;
1541 bool hasParameter = false;
1542 bool hasCompositeOwner = false;
1543 bool hasResultInHistory = false;
1544 bool hasFolder = false;
1545 ModuleBase_Tools::checkObjects(aObjects, hasResult, hasFeature, hasParameter,
1546 hasCompositeOwner, hasResultInHistory, hasFolder);
1548 ModuleBase_Operation* aCurrentOp = myWorkshop->currentOperation();
1549 if (aSelected == 1) {
1550 ObjectPtr aObject = aObjects.first();
1552 ResultPartPtr aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aObject);
1553 FeaturePtr aFeature = std::dynamic_pointer_cast<ModelAPI_Feature>(aObject);
1554 bool isPart = aPart.get() ||
1555 (aFeature.get() && (aFeature->getKind() == PartSetPlugin_Part::ID()));
1557 DocumentPtr aPartDoc;
1559 aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aFeature->firstResult());
1561 if (aPart.get()) // this may be null is Part feature is disabled
1562 aPartDoc = aPart->partDoc();
1564 theMenu->addAction(aActivatePartAction);
1565 aActivatePartAction->setEnabled((aMgr->activeDocument() != aPartDoc));
1567 } else if (aObject->document() == aMgr->activeDocument()) {
1568 if (hasParameter || hasFeature) {
1569 myMenuMgr->action("EDIT_CMD")->setEnabled(true);
1570 theMenu->addAction(myMenuMgr->action("EDIT_CMD"));
1571 if (aCurrentOp && aFeature.get()) {
1572 if (aCurrentOp->id().toStdString() == aFeature->getKind())
1573 myMenuMgr->action("EDIT_CMD")->setEnabled(false);
1580 myMenuMgr->action("EDIT_CMD")->setEnabled(aCurrentOp == 0);
1581 theMenu->addAction(myMenuMgr->action("EDIT_CMD"));
1582 theMenu->addSeparator();
1585 bool aNotDeactivate = (aCurrentOp == 0);
1586 if (!aNotDeactivate) {
1587 aActivatePartAction->setEnabled(false);
1591 //******************************************************
1592 #define EXPAND_PARENT(OBJ) \
1593 QModelIndex aObjIndex = aDataModel->objectIndex(OBJ); \
1594 if (aObjIndex.isValid()) { \
1595 QModelIndex aParent = aObjIndex.parent(); \
1596 int aCount = aDataModel->rowCount(aParent); \
1598 aTreeView->setExpanded(aParent, true); \
1601 //******************************************************
1602 void PartSet_Module::processEvent(const std::shared_ptr<Events_Message>& theMessage)
1604 if (theMessage->eventID() == Events_Loop::loop()->eventByName(EVENT_DOCUMENT_CHANGED)) {
1605 SessionPtr aMgr = ModelAPI_Session::get();
1606 if (!aMgr->hasModuleDocument()) // if document is closed, do not call the document creation
1608 // Do not change activation of parts if an operation active
1609 static QStringList aAllowActivationList;
1610 if (aAllowActivationList.isEmpty())
1611 aAllowActivationList <<
1612 QString(PartSetPlugin_Part::ID().c_str()) <<
1613 QString(PartSetPlugin_Duplicate::ID().c_str()) <<
1614 QString(PartSetPlugin_Remove::ID().c_str());
1615 if (myWorkshop->currentOperation() &&
1616 (!aAllowActivationList.contains(myWorkshop->currentOperation()->id())))
1618 XGUI_Workshop* aWorkshop = getWorkshop();
1619 bool needUpdate = false;
1620 XGUI_DataTree* aTreeView = 0;
1621 if (aWorkshop->objectBrowser()) {
1622 aTreeView = aWorkshop->objectBrowser()->treeView();
1623 QLabel* aLabel = aWorkshop->objectBrowser()->activeDocLabel();
1624 QPalette aPalet = aLabel->palette();
1626 DocumentPtr aActiveDoc = aMgr->activeDocument();
1628 // Clear active part index if there is no Part documents
1629 // It could be not null if document was closed and opened a new
1630 // without closeDocument call
1631 if (aMgr->allOpenedDocuments().size() <= 1)
1632 myActivePartIndex = QModelIndex();
1634 XGUI_DataModel* aDataModel = aWorkshop->objectBrowser()->dataModel();
1635 QModelIndex aOldActive = myActivePartIndex;
1636 myActivePartIndex = aDataModel->documentRootIndex(aActiveDoc, 0);
1637 if (myActivePartIndex.isValid()) {
1638 needUpdate = aTreeView->isExpanded(myActivePartIndex);
1640 aTreeView->setExpanded(myActivePartIndex, true);
1642 if ((aOldActive != myActivePartIndex) && (aOldActive.isValid()))
1643 aTreeView->setExpanded(aOldActive, false);
1645 aLabel->setPalette(aPalet);
1647 aWorkshop->updateCommandStatus();
1649 // Update displayed objects in order to update active color
1650 XGUI_Displayer* aDisplayer = aWorkshop->displayer();
1651 QObjectPtrList aObjects = aDisplayer->displayedObjects();
1653 foreach(ObjectPtr aObj, aObjects) {
1654 aHidden = !aObj->data() || !aObj->data()->isValid() ||
1655 aObj->isDisabled() || (!aObj->isDisplayed());
1657 aDisplayer->redisplay(aObj, false);
1660 aDisplayer->updateViewer();
1661 // Update tree items if they are expanded
1663 aTreeView->viewport()->update(aTreeView->viewport()->rect());
1665 } else if (theMessage->eventID() == Events_Loop::loop()->eventByName(EVENT_OBJECT_CREATED)) {
1666 std::shared_ptr<ModelAPI_ObjectUpdatedMessage> aUpdMsg =
1667 std::dynamic_pointer_cast<ModelAPI_ObjectUpdatedMessage>(theMessage);
1668 std::set<ObjectPtr> aObjects = aUpdMsg->objects();
1670 ObjectPtr aConstrObj;
1671 ObjectPtr aResultObj;
1672 std::set<ObjectPtr>::const_iterator aIt;
1673 DocumentPtr aRootDoc = ModelAPI_Session::get()->moduleDocument();
1674 for (aIt = aObjects.begin(); aIt != aObjects.end(); ++aIt) {
1675 ObjectPtr aObject = (*aIt);
1676 if ((!aResultObj.get()) && (aObject->groupName() == ModelAPI_ResultBody::group())
1677 && (aObject->document() != aRootDoc))
1678 aResultObj = aObject;
1679 if ((!aConstrObj.get()) && (aObject->groupName() == ModelAPI_ResultConstruction::group())
1680 && (aObject->document() != aRootDoc))
1681 aConstrObj = aObject;
1682 if (aResultObj.get() && aConstrObj.get())
1686 if (aResultObj.get() || aConstrObj.get()) {
1687 XGUI_Workshop* aWorkshop = getWorkshop();
1688 XGUI_DataTree* aTreeView = aWorkshop->objectBrowser()->treeView();
1689 XGUI_DataModel* aDataModel = aWorkshop->objectBrowser()->dataModel();
1691 if (aResultObj.get()) {
1692 EXPAND_PARENT(aResultObj)
1694 if (aConstrObj.get()) {
1695 EXPAND_PARENT(aConstrObj)
1699 else if (theMessage->eventID() == Events_Loop::loop()->eventByName(EVENT_OBJECT_TO_REDISPLAY)) {
1700 CompositeFeaturePtr aSketch = mySketchMgr->activeSketch();
1701 if (aSketch.get()) {
1702 ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
1703 if (PartSet_SketcherMgr::isSketchOperation(anOperation) &&
1704 mySketchMgr->previewSketchPlane()->isDisplayed())
1705 mySketchMgr->previewSketchPlane()->createSketchPlane(aSketch, myWorkshop);
1710 //******************************************************
1711 void PartSet_Module::onTreeViewDoubleClick(const QModelIndex& theIndex)
1713 if (myWorkshop->currentOperation()) // Do not change activation of parts if an operation active
1715 SessionPtr aMgr = ModelAPI_Session::get();
1716 if (!theIndex.isValid()) {
1717 // It seems that this code is obsolete
1718 //aMgr->setActiveDocument(aMgr->moduleDocument());
1721 if (theIndex.column() != 1) // Use only first column
1724 XGUI_Workshop* aWorkshop = getWorkshop();
1725 XGUI_DataModel* aDataModel = aWorkshop->objectBrowser()->dataModel();
1726 // De not use non editable Indexes
1727 if ((aDataModel->flags(theIndex) & Qt::ItemIsSelectable) == 0)
1729 ObjectPtr aObj = aDataModel->object(theIndex);
1731 ResultPartPtr aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aObj);
1732 if (!aPart.get()) { // Probably this is Feature
1733 FeaturePtr aPartFeature = std::dynamic_pointer_cast<ModelAPI_Feature>(aObj);
1734 if (aPartFeature.get() && (aPartFeature->getKind() == PartSetPlugin_Part::ID())) {
1735 aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aPartFeature->firstResult());
1738 if (aPart.get()) { // if this is a part
1739 if (aPart->partDoc() == aMgr->activeDocument()) {
1740 myMenuMgr->activatePartSet();
1742 myMenuMgr->activatePart(aPart);
1747 //******************************************************
1748 void PartSet_Module::onViewCreated(ModuleBase_IViewWindow*)
1750 // z layer is created for all started operations in order to visualize operation AIS presentation
1752 Handle(AIS_InteractiveContext) aContext = myWorkshop->viewer()->AISContext();
1753 if (aContext.IsNull())
1756 Handle(V3d_Viewer) aViewer = aContext->CurrentViewer();
1757 if (myVisualLayerId == 0) {
1758 if (myVisualLayerId == 0)
1759 aViewer->AddZLayer(myVisualLayerId);
1761 TColStd_SequenceOfInteger aZList;
1762 aViewer->GetAllZLayers(aZList);
1763 bool aFound = false;
1764 for (int i = 1; i <= aZList.Length(); i++) {
1765 if (aZList(i) == myVisualLayerId) {
1771 aViewer->AddZLayer(myVisualLayerId);
1773 // if there is an active operation with validated widget,
1774 // the filters of this widget should be activated in the created view
1775 myWorkshop->selectionActivate()->updateSelectionFilters();
1776 myWorkshop->selectionActivate()->updateSelectionModes();
1779 //******************************************************
1780 void PartSet_Module::widgetStateChanged(int thePreviousState)
1782 mySketchMgr->widgetStateChanged(thePreviousState);
1785 //******************************************************
1786 bool PartSet_Module::processEnter(const std::string& thePreviousAttributeID)
1788 return mySketchReentrantMgr->processEnter(thePreviousAttributeID);
1791 //******************************************************
1792 void PartSet_Module::beforeOperationStopped(ModuleBase_Operation* theOperation)
1794 if (PartSet_SketcherMgr::isSketchOperation(theOperation)) {
1795 mySketchMgr->stopSketch(theOperation);
1799 //******************************************************
1800 GeomShapePtr PartSet_Module::findShape(const AttributePtr& theAttribute)
1802 GeomShapePtr aGeomShape;
1804 ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
1805 if (anOperation && sketchMgr()->isNestedSketchOperation(anOperation)) {
1806 aGeomShape = PartSet_Tools::findShapeBy2DPoint(theAttribute, myWorkshop);
1811 //******************************************************
1812 AttributePtr PartSet_Module::findAttribute(const ObjectPtr& theObject,
1813 const GeomShapePtr& theGeomShape)
1815 AttributePtr anAttribute;
1816 GeomShapePtr aGeomShape = theGeomShape;
1817 if (!aGeomShape.get()) {
1818 // processing shape of result, e.g. sketch circle center is selected, this is a result
1819 // the geom shape is empty, the shape of result should be used
1820 ResultPtr aResult = std::dynamic_pointer_cast<ModelAPI_Result>(theObject);
1821 if (aResult.get()) {
1822 aGeomShape = aResult->shape();
1826 if (aGeomShape.get()) {
1827 TopoDS_Shape aTDSShape = aGeomShape->impl<TopoDS_Shape>();
1828 std::pair<AttributePtr, int> anAttrAndIndex =
1829 PartSet_Tools::findAttributeBy2dPoint(theObject, aTDSShape, mySketchMgr->activeSketch());
1830 return anAttrAndIndex.first;
1835 //******************************************************
1836 std::shared_ptr<Events_Message> PartSet_Module::reentrantMessage()
1838 return sketchReentranceMgr()->reentrantMessage();
1841 //******************************************************
1842 void PartSet_Module::setReentrantPreSelection(const std::shared_ptr<Events_Message>& theMessage)
1844 sketchReentranceMgr()->setReentrantPreSelection(theMessage);
1847 //******************************************************
1848 void PartSet_Module::onChoiceChanged(ModuleBase_ModelWidget* theWidget,
1851 ModuleBase_WidgetChoice* aChoiceWidget = dynamic_cast<ModuleBase_WidgetChoice*>(theWidget);
1855 QString aChoiceTitle = aChoiceWidget->getPropertyPanelTitle(theIndex);
1856 if (!aChoiceTitle.isEmpty()) {
1857 ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
1860 ModuleBase_IPropertyPanel* aPanel = aOperation->propertyPanel();
1862 aPanel->setWindowTitle(aChoiceTitle);
1866 //******************************************************
1867 XGUI_Workshop* PartSet_Module::getWorkshop() const
1869 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
1870 return aConnector->workshop();
1873 void PartSet_Module::setDefaultConstraintShown()
1875 myHasConstraintShown[PartSet_Tools::Geometrical] = true;
1876 myHasConstraintShown[PartSet_Tools::Dimensional] = true;
1877 myHasConstraintShown[PartSet_Tools::Expressions] = false;
1880 //******************************************************
1881 ModuleBase_ITreeNode* PartSet_Module::rootNode() const
1886 //******************************************************
1887 void PartSet_Module::disableCustomMode(ModuleBase_CustomizeFlag theMode) {
1888 myCustomPrs->disableCustomMode(theMode);
1891 //******************************************************
1892 void PartSet_Module::enableCustomModes() {
1893 myCustomPrs->enableCustomModes();
1896 //******************************************************
1897 void PartSet_Module::onConflictingConstraints()
1899 const std::set<ObjectPtr>& aConstraints = myOverconstraintListener->conflictingObjects();
1900 QObjectPtrList aObjectsList;
1901 std::set<ObjectPtr>::const_iterator aIt;
1902 for (aIt = aConstraints.cbegin(); aIt != aConstraints.cend(); aIt++) {
1903 if (mySketchReentrantMgr->isLastAutoConstraint(*aIt))
1904 aObjectsList.append(*aIt);
1906 if (aObjectsList.size() > 0) {
1907 XGUI_Workshop* aWorkshop = getWorkshop();
1908 QString aDescription = aWorkshop->contextMenuMgr()->action("DELETE_CMD")->text();
1909 ModuleBase_Operation* anOpAction = new ModuleBase_Operation(aDescription);
1910 XGUI_OperationMgr* anOpMgr = aWorkshop->operationMgr();
1912 ModuleBase_Operation* anOp = anOpMgr->currentOperation();
1913 if (sketchMgr()->isNestedSketchOperation(anOp))
1916 anOpMgr->startOperation(anOpAction);
1917 aWorkshop->deleteFeatures(aObjectsList);
1918 anOpMgr->commitOperation();
1919 ModuleBase_Tools::flushUpdated(sketchMgr()->activeSketch());