1 // Copyright (C) 2014-20xx CEA/DEN, EDF R&D
3 #include "PartSet_Module.h"
4 #include "PartSet_WidgetSketchLabel.h"
5 #include "PartSet_Validators.h"
6 #include "PartSet_Tools.h"
7 #include "PartSet_WidgetPoint2d.h"
8 #include "PartSet_WidgetPoint2dDistance.h"
9 #include "PartSet_WidgetPoint2DFlyout.h"
10 #include "PartSet_WidgetShapeSelector.h"
11 #include "PartSet_WidgetMultiSelector.h"
12 #include "PartSet_WidgetEditor.h"
13 #include "PartSet_WidgetFileSelector.h"
14 #include "PartSet_WidgetSketchCreator.h"
15 #include "PartSet_SketcherMgr.h"
16 #include "PartSet_SketcherReetntrantMgr.h"
17 #include "PartSet_MenuMgr.h"
18 #include "PartSet_CustomPrs.h"
19 #include "PartSet_IconFactory.h"
20 #include "PartSet_WidgetChoice.h"
21 #include "PartSet_OverconstraintListener.h"
23 #include "PartSet_Filters.h"
24 #include "PartSet_FilterInfinite.h"
26 #include <PartSetPlugin_Remove.h>
27 #include <PartSetPlugin_Part.h>
28 #include <PartSetPlugin_Duplicate.h>
30 #include <ModuleBase_Operation.h>
31 #include <ModuleBase_OperationAction.h>
32 #include <ModuleBase_IViewer.h>
33 #include <ModuleBase_IViewWindow.h>
34 #include <ModuleBase_IPropertyPanel.h>
35 #include <ModuleBase_WidgetEditor.h>
36 #include <ModuleBase_WidgetValidated.h>
37 #include <ModuleBase_FilterFactory.h>
38 #include <ModuleBase_Tools.h>
39 #include <ModuleBase_OperationFeature.h>
40 #include <ModuleBase_WidgetFactory.h>
41 #include <ModuleBase_OperationDescription.h>
43 #include <ModelAPI_Object.h>
44 #include <ModelAPI_Events.h>
45 #include <ModelAPI_Validator.h>
46 #include <ModelAPI_Data.h>
47 #include <ModelAPI_Session.h>
48 #include <ModelAPI_ResultBody.h>
49 #include <ModelAPI_AttributeString.h>
51 #include <GeomDataAPI_Point2D.h>
52 #include <GeomDataAPI_Point.h>
53 #include <GeomDataAPI_Dir.h>
55 #include <XGUI_Displayer.h>
56 #include <XGUI_Workshop.h>
57 #include <XGUI_OperationMgr.h>
58 #include <XGUI_PropertyPanel.h>
59 #include <XGUI_ModuleConnector.h>
60 #include <XGUI_ContextMenuMgr.h>
61 #include <XGUI_Tools.h>
62 #include <XGUI_ObjectsBrowser.h>
63 #include <XGUI_SelectionMgr.h>
64 #include <XGUI_DataModel.h>
65 #include <XGUI_ErrorMgr.h>
66 #include <XGUI_CustomPrs.h>
68 #include <SketchPlugin_Feature.h>
69 #include <SketchPlugin_Sketch.h>
70 #include <SketchPlugin_ConstraintAngle.h>
71 #include <SketchPlugin_ConstraintLength.h>
72 #include <SketchPlugin_ConstraintDistance.h>
73 #include <SketchPlugin_ConstraintParallel.h>
74 #include <SketchPlugin_ConstraintPerpendicular.h>
75 #include <SketchPlugin_ConstraintRadius.h>
77 #include <SketcherPrs_SymbolPrs.h>
78 #include <SketcherPrs_Tools.h>
80 #include <Events_Loop.h>
81 #include <Config_PropManager.h>
82 #include <Config_Keywords.h>
84 #include <StdSelect_TypeOfFace.hxx>
85 #include <TopoDS_Vertex.hxx>
87 #include <TopoDS_Shape.hxx>
88 #include <BRep_Tool.hxx>
89 #include <AIS_Dimension.hxx>
92 #include <QMouseEvent>
95 #include <QApplication>
96 #include <QMessageBox>
97 #include <QMainWindow>
101 #include <GeomAlgoAPI_FaceBuilder.h>
102 #include <GeomDataAPI_Dir.h>
104 #include <SelectMgr_ListIteratorOfListOfFilter.hxx>
110 /*!Create and return new instance of XGUI_Module*/
111 extern "C" PARTSET_EXPORT ModuleBase_IModule* createModule(ModuleBase_IWorkshop* theWshop)
113 return new PartSet_Module(theWshop);
116 PartSet_Module::PartSet_Module(ModuleBase_IWorkshop* theWshop)
117 : ModuleBase_IModule(theWshop),
120 new PartSet_IconFactory();
122 mySketchMgr = new PartSet_SketcherMgr(this);
123 mySketchReentrantMgr = new PartSet_SketcherReetntrantMgr(theWshop);
125 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(theWshop);
126 XGUI_Workshop* aWorkshop = aConnector->workshop();
128 XGUI_OperationMgr* anOpMgr = aWorkshop->operationMgr();
129 connect(anOpMgr, SIGNAL(operationActivatedByPreselection()),
130 this, SLOT(onOperationActivatedByPreselection()));
132 ModuleBase_IViewer* aViewer = theWshop->viewer();
133 connect(aViewer, SIGNAL(keyRelease(ModuleBase_IViewWindow*, QKeyEvent*)),
134 this, SLOT(onKeyRelease(ModuleBase_IViewWindow*, QKeyEvent*)));
135 connect(aViewer, SIGNAL(viewTransformed(int)),
136 SLOT(onViewTransformed(int)));
137 connect(aViewer, SIGNAL(viewCreated(ModuleBase_IViewWindow*)),
138 SLOT(onViewCreated(ModuleBase_IViewWindow*)));
139 myMenuMgr = new PartSet_MenuMgr(this);
140 myCustomPrs = new PartSet_CustomPrs(theWshop);
142 myOverconstraintListener = new PartSet_OverconstraintListener(theWshop);
144 Events_Loop* aLoop = Events_Loop::loop();
145 aLoop->registerListener(this, Events_Loop::eventByName(EVENT_DOCUMENT_CHANGED));
147 mySelectionFilters.Append(new PartSet_GlobalFilter(myWorkshop));
148 mySelectionFilters.Append(new PartSet_FilterInfinite(myWorkshop));
150 myHasConstraintShown[PartSet_Tools::Geometrical] = true;
151 myHasConstraintShown[PartSet_Tools::Dimensional] = true;
153 Config_PropManager::registerProp("Visualization", "operation_parameter_color",
154 "Reference shape wireframe color in operation", Config_Prop::Color,
155 PartSet_CustomPrs::OPERATION_PARAMETER_COLOR());
156 Config_PropManager::registerProp("Visualization", "operation_result_color",
157 "Result shape wireframe color in operation", Config_Prop::Color,
158 PartSet_CustomPrs::OPERATION_RESULT_COLOR());
159 Config_PropManager::registerProp("Visualization", "operation_highlight_color",
160 "Multi selector item color in operation", Config_Prop::Color,
161 PartSet_CustomPrs::OPERATION_HIGHLIGHT_COLOR());
164 PartSet_Module::~PartSet_Module()
166 SelectMgr_ListIteratorOfListOfFilter aIt(mySelectionFilters);
167 for (; aIt.More(); aIt.Next()) {
168 Handle(SelectMgr_Filter) aFilter = aIt.Value();
169 if (!aFilter.IsNull())
173 delete myOverconstraintListener;
176 void PartSet_Module::activateSelectionFilters()
178 SelectMgr_ListIteratorOfListOfFilter aIt(mySelectionFilters);
179 for (; aIt.More(); aIt.Next()) {
180 Handle(SelectMgr_Filter) aFilter = aIt.Value();
181 if (!aFilter.IsNull())
182 myWorkshop->viewer()->addSelectionFilter(aFilter);
186 void PartSet_Module::deactivateSelectionFilters()
188 SelectMgr_ListIteratorOfListOfFilter aIt(mySelectionFilters);
189 for (; aIt.More(); aIt.Next()) {
190 Handle(SelectMgr_Filter) aFilter = aIt.Value();
191 if (!aFilter.IsNull())
192 myWorkshop->viewer()->removeSelectionFilter(aFilter);
196 void PartSet_Module::registerValidators()
198 //Registering of validators
199 SessionPtr aMgr = ModelAPI_Session::get();
200 ModelAPI_ValidatorsFactory* aFactory = aMgr->validators();
201 aFactory->registerValidator("PartSet_DistanceSelection", new PartSet_DistanceSelection);
202 aFactory->registerValidator("PartSet_LengthSelection", new PartSet_LengthSelection);
203 aFactory->registerValidator("PartSet_PerpendicularSelection", new PartSet_PerpendicularSelection);
204 aFactory->registerValidator("PartSet_ParallelSelection", new PartSet_ParallelSelection);
205 aFactory->registerValidator("PartSet_RadiusSelection", new PartSet_RadiusSelection);
206 aFactory->registerValidator("PartSet_RigidSelection", new PartSet_RigidSelection);
207 aFactory->registerValidator("PartSet_CoincidentSelection", new PartSet_CoincidentSelection);
208 aFactory->registerValidator("PartSet_HVDirSelection", new PartSet_HVDirSelection);
209 aFactory->registerValidator("PartSet_TangentSelection", new PartSet_TangentSelection);
210 aFactory->registerValidator("PartSet_FilletSelection", new PartSet_FilletSelection);
211 aFactory->registerValidator("PartSet_AngleSelection", new PartSet_AngleSelection);
212 aFactory->registerValidator("PartSet_EqualSelection", new PartSet_EqualSelection);
213 aFactory->registerValidator("PartSet_CollinearSelection", new PartSet_CollinearSelection);
214 aFactory->registerValidator("PartSet_MiddlePointSelection", new PartSet_MiddlePointSelection);
215 aFactory->registerValidator("PartSet_DifferentObjects", new PartSet_DifferentObjectsValidator);
216 aFactory->registerValidator("PartSet_CoincidentAttr", new PartSet_CoincidentAttr);
217 aFactory->registerValidator("PartSet_SketchEntityValidator", new PartSet_SketchEntityValidator);
220 void PartSet_Module::registerFilters()
222 //Registering of selection filters
223 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
224 ModuleBase_FilterFactory* aFactory = aConnector->selectionFilters();
227 void PartSet_Module::registerProperties()
229 Config_PropManager::registerProp("Sketch planes", "planes_size", "Size", Config_Prop::Double,
231 Config_PropManager::registerProp("Sketch planes", "planes_thickness", "Thickness",
232 Config_Prop::Integer, SKETCH_WIDTH);
233 Config_PropManager::registerProp("Sketch planes", "rotate_to_plane", "Rotate to plane when selected",
234 Config_Prop::Boolean, "false");
237 void PartSet_Module::connectToPropertyPanel(ModuleBase_ModelWidget* theWidget, const bool isToConnect)
239 mySketchMgr->connectToPropertyPanel(theWidget, isToConnect);
242 void PartSet_Module::operationCommitted(ModuleBase_Operation* theOperation)
244 if (PartSet_SketcherMgr::isNestedSketchOperation(theOperation)) {
245 mySketchMgr->commitNestedSketch(theOperation);
248 /// Restart sketcher operations automatically
249 if (!mySketchReentrantMgr->operationCommitted(theOperation)) {
251 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>(theOperation);
252 if (aFOperation && !aFOperation->isEditOperation()) {
253 // the selection is cleared after commit the create operation
254 // in order to do not use the same selected objects in the restarted operation
255 // for common behaviour, the selection is cleared even if the operation is not restarted
256 getWorkshop()->selector()->clearSelection();
261 void PartSet_Module::operationAborted(ModuleBase_Operation* theOperation)
263 /// Restart sketcher operations automatically
264 mySketchReentrantMgr->operationAborted(theOperation);
267 void PartSet_Module::operationStarted(ModuleBase_Operation* theOperation)
269 /// Restart sketcher operations automatically
270 mySketchReentrantMgr->operationStarted(theOperation);
272 if (PartSet_SketcherMgr::isSketchOperation(theOperation)) {
273 mySketchMgr->startSketch(theOperation);
275 else if (PartSet_SketcherMgr::isNestedSketchOperation(theOperation)) {
276 mySketchMgr->startNestedSketch(theOperation);
279 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>(theOperation);
281 myCustomPrs->activate(aFOperation->feature(), ModuleBase_IModule::CustomizeArguments, true);
282 myCustomPrs->activate(aFOperation->feature(), ModuleBase_IModule::CustomizeResults, true);
286 void PartSet_Module::operationResumed(ModuleBase_Operation* theOperation)
288 ModuleBase_IModule::operationResumed(theOperation);
290 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>(theOperation);
292 myCustomPrs->activate(aFOperation->feature(), ModuleBase_IModule::CustomizeArguments, true);
293 myCustomPrs->activate(aFOperation->feature(), ModuleBase_IModule::CustomizeResults, true);
297 void PartSet_Module::operationStopped(ModuleBase_Operation* theOperation)
299 bool isModified = myCustomPrs->deactivate(ModuleBase_IModule::CustomizeArguments, false) ||
300 myCustomPrs->deactivate(ModuleBase_IModule::CustomizeResults, false);
302 if (PartSet_SketcherMgr::isNestedSketchOperation(theOperation)) {
303 mySketchMgr->stopNestedSketch(theOperation);
306 //VSV: Viewer is updated on feature update and redisplay
308 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(myWorkshop);
309 XGUI_Displayer* aDisplayer = aConnector->workshop()->displayer();
310 aDisplayer->updateViewer();
313 QMap<PartSet_Tools::ConstraintVisibleState, bool>::const_iterator anIt = myHasConstraintShown.begin(),
314 aLast = myHasConstraintShown.end();
315 for (; anIt != aLast; anIt++) {
316 myHasConstraintShown[anIt.key()];
317 mySketchMgr->onShowConstraintsToggle(anIt.value(), myHasConstraintShown[anIt.key()]);
321 ModuleBase_Operation* PartSet_Module::currentOperation() const
323 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
324 XGUI_OperationMgr* anOpMgr = aConnector->workshop()->operationMgr();
325 return anOpMgr->currentOperation();
328 bool PartSet_Module::canUndo() const
330 bool aCanUndo = false;
331 SessionPtr aMgr = ModelAPI_Session::get();
332 if (aMgr->hasModuleDocument() && aMgr->canUndo()) {
333 aCanUndo = !aMgr->isOperation();
334 if (!aCanUndo) // check the enable state additionally by sketch manager
335 aCanUndo = aMgr->canUndo();
340 bool PartSet_Module::canRedo() const
342 bool aCanRedo = false;
343 SessionPtr aMgr = ModelAPI_Session::get();
344 if (aMgr->hasModuleDocument() && aMgr->canRedo()) {
345 aCanRedo = !aMgr->isOperation();
346 if (!aCanRedo) // check the enable state additionally by sketch manager
347 aCanRedo = aMgr->canRedo();
352 bool PartSet_Module::canApplyAction(const ObjectPtr& theObject, const QString& theActionId) const
355 if (theActionId == "MOVE_CMD") {
356 FeaturePtr aFeature = ModelAPI_Feature::feature(theObject);
358 // part features can not be moved in the history.
359 if (aFeature->getKind() == PartSetPlugin_Part::ID())
366 bool PartSet_Module::canEraseObject(const ObjectPtr& theObject) const
368 // the sketch manager put the restriction to the objects erase
369 return mySketchMgr->canEraseObject(theObject);
372 bool PartSet_Module::canDisplayObject(const ObjectPtr& theObject) const
374 // the sketch manager put the restriction to the objects display
375 return mySketchMgr->canDisplayObject(theObject);
378 void PartSet_Module::processHiddenObject(const std::list<ObjectPtr>& theObjects)
380 mySketchMgr->processHiddenObject(theObjects);
383 bool PartSet_Module::canActivateSelection(const ObjectPtr& theObject) const
385 bool aCanActivate = ModuleBase_IModule::canActivateSelection(theObject);
387 ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
388 bool isSketchOp = PartSet_SketcherMgr::isSketchOperation(anOperation),
389 isNestedOp = PartSet_SketcherMgr::isNestedSketchOperation(anOperation);
390 if (isSketchOp || isNestedOp) {
391 // in active sketch operation it is possible to activate operation object in selection
392 // in the edit operation, e.g. points of the line can be moved when the line is edited
393 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>(anOperation);
394 aCanActivate = aCanActivate || (aFOperation && aFOperation->isEditOperation());
399 bool PartSet_Module::addViewerMenu(QMenu* theMenu, const QMap<QString, QAction*>& theStdActions) const
401 return myMenuMgr->addViewerMenu(theMenu, theStdActions);
404 void PartSet_Module::updateViewerMenu(const QMap<QString, QAction*>& theStdActions)
406 myMenuMgr->updateViewerMenu(theStdActions);
409 QString PartSet_Module::getFeatureError(const FeaturePtr& theFeature)
411 QString anError = ModuleBase_IModule::getFeatureError(theFeature);
412 if (anError.isEmpty())
413 anError = sketchMgr()->getFeatureError(theFeature);
418 void PartSet_Module::grantedOperationIds(ModuleBase_Operation* theOperation,
419 QStringList& theIds) const
421 myMenuMgr->grantedOperationIds(theOperation, theIds);
423 if (PartSet_SketcherMgr::isSketchOperation(theOperation)) {
424 XGUI_Workshop* aWorkshop = getWorkshop();
425 theIds.append(aWorkshop->contextMenuMgr()->action("DELETE_CMD")->text());
429 void PartSet_Module::activeSelectionModes(QIntList& theModes)
432 if (mySketchMgr->activeSketch().get())
433 PartSet_SketcherMgr::sketchSelectionModes(theModes);
436 bool PartSet_Module::isMouseOverWindow()
438 return mySketchMgr->isMouseOverWindow();
441 void PartSet_Module::closeDocument()
446 void PartSet_Module::clearViewer()
448 myCustomPrs->clearPrs();
450 XGUI_Workshop* aWorkshop = getWorkshop();
451 XGUI_Displayer* aDisplayer = aWorkshop->displayer();
452 aDisplayer->deactivateSelectionFilters();
455 void PartSet_Module::propertyPanelDefined(ModuleBase_Operation* theOperation)
457 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>(theOperation);
461 ModuleBase_IPropertyPanel* aPanel = aFOperation->propertyPanel();
462 // we have to manually activate the sketch label in edit mode
463 if (PartSet_SketcherMgr::isSketchOperation(aFOperation) && (aFOperation->isEditOperation()))
464 aPanel->activateWidget(aPanel->modelWidgets().first());
467 bool PartSet_Module::createWidgets(ModuleBase_Operation* theOperation,
468 QList<ModuleBase_ModelWidget*>& theWidgets) const
470 bool aProcessed = false;
472 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>(theOperation);
473 XGUI_Workshop* aWorkshop = getWorkshop();
474 XGUI_PropertyPanel* aPropertyPanel = aWorkshop->propertyPanel();
475 if (mySketchMgr->activeSketch().get() && aFOperation && aPropertyPanel) {
476 ModuleBase_ISelection* aSelection = workshop()->selection();
477 // click on a point in sketch leads here with the point is highlighted, not yet selected
478 QList<ModuleBase_ViewerPrs> aPreselection = aSelection->getHighlighted();
479 if (aPreselection.size() == 1) {
480 ModuleBase_ViewerPrs aSelectedPrs = aPreselection[0];
481 ObjectPtr anObject = aSelectedPrs.object();
483 FeaturePtr aFeature = ModelAPI_Feature::feature(anObject);
484 FeaturePtr anOpFeature = aFOperation->feature();
485 TopoDS_Shape aShape = aSelectedPrs.shape();
486 // click on the digit of dimension constrain comes here with an empty shape, so we need the check
487 if (aFeature == anOpFeature && !aShape.IsNull()) {
488 AttributePtr anAttribute = PartSet_Tools::findAttributeBy2dPoint(anObject, aShape,
489 mySketchMgr->activeSketch());
490 if (anAttribute.get()) {
491 QString aXmlRepr = aFOperation->getDescription()->xmlRepresentation();
492 ModuleBase_WidgetFactory aFactory(aXmlRepr.toStdString(), workshop());
494 const std::string anAttributeId = anAttribute->id();
495 aFactory.createWidget(aPropertyPanel->contentWidget(), anAttributeId);
497 theWidgets = aFactory.getModelWidgets();
498 // it is possible that the point does not present in XML definition,
499 // in this case, we assume that it is not processed by this module
500 // e.g. "Intersection point" feature
501 aProcessed = !theWidgets.isEmpty();
509 void PartSet_Module::onSelectionChanged()
511 ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
515 bool isSketcherOp = false;
516 // An edit operation is enable only if the current opeation is the sketch operation
517 if (mySketchMgr->activeSketch()) {
518 if (PartSet_Tools::sketchPlane(mySketchMgr->activeSketch()))
519 isSketcherOp = PartSet_SketcherMgr::isSketchOperation(aOperation);
522 // Editing of constraints can be done on selection
523 ModuleBase_ISelection* aSelect = myWorkshop->selection();
524 QList<ModuleBase_ViewerPrs> aSelected = aSelect->getSelected();
525 if (aSelected.size() == 1) {
526 ModuleBase_ViewerPrs aPrs = aSelected.first();
527 ObjectPtr aObject = aPrs.object();
528 FeaturePtr aFeature = ModelAPI_Feature::feature(aObject);
530 std::string aId = aFeature->getKind();
531 if ((aId == SketchPlugin_ConstraintRadius::ID()) ||
532 (aId == SketchPlugin_ConstraintLength::ID()) ||
533 (aId == SketchPlugin_ConstraintDistance::ID()) ||
534 (aId == SketchPlugin_ConstraintAngle::ID())) {
535 editFeature(aFeature);
542 void PartSet_Module::onKeyRelease(ModuleBase_IViewWindow* theWnd, QKeyEvent* theEvent)
544 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
545 XGUI_OperationMgr* anOpMgr = aConnector->workshop()->operationMgr();
546 anOpMgr->onKeyReleased(theWnd->viewPort(), theEvent);
549 void PartSet_Module::onOperationActivatedByPreselection()
551 if (!mySketchReentrantMgr->canBeCommittedByPreselection())
553 mySketchMgr->operationActivatedByPreselection();
556 ModuleBase_ModelWidget* PartSet_Module::createWidgetByType(const std::string& theType, QWidget* theParent,
557 Config_WidgetAPI* theWidgetApi, std::string theParentId)
559 ModuleBase_IWorkshop* aWorkshop = workshop();
560 XGUI_Workshop* aXUIWorkshop = getWorkshop();
561 ModuleBase_ModelWidget* aWgt = NULL;
562 if (theType == "sketch-start-label") {
563 PartSet_WidgetSketchLabel* aLabelWgt = new PartSet_WidgetSketchLabel(theParent, aWorkshop,
564 theWidgetApi, theParentId, mySketchMgr->showConstraintStates());
565 connect(aLabelWgt, SIGNAL(planeSelected(const std::shared_ptr<GeomAPI_Pln>&)),
566 mySketchMgr, SLOT(onPlaneSelected(const std::shared_ptr<GeomAPI_Pln>&)));
567 connect(aLabelWgt, SIGNAL(showConstraintToggled(bool, int)),
568 mySketchMgr, SLOT(onShowConstraintsToggle(bool, int)));
570 } else if (theType == "sketch-2dpoint_selector") {
571 PartSet_WidgetPoint2D* aPointWgt = new PartSet_WidgetPoint2D(theParent, aWorkshop,
572 theWidgetApi, theParentId);
573 aPointWgt->setSketch(mySketchMgr->activeSketch());
574 connect(aPointWgt, SIGNAL(vertexSelected()), sketchReentranceMgr(), SLOT(onVertexSelected()));
576 }else if (theType == "sketch-2dpoint_flyout_selector") {
577 PartSet_WidgetPoint2DFlyout* aPointWgt = new PartSet_WidgetPoint2DFlyout(theParent, aWorkshop,
578 theWidgetApi, theParentId);
579 aPointWgt->setSketch(mySketchMgr->activeSketch());
580 connect(aPointWgt, SIGNAL(vertexSelected()), sketchReentranceMgr(), SLOT(onVertexSelected()));
582 } else if (theType == "point2ddistance") {
583 PartSet_WidgetPoint2dDistance* aDistanceWgt = new PartSet_WidgetPoint2dDistance(theParent,
584 aWorkshop, theWidgetApi, theParentId);
585 aDistanceWgt->setSketch(mySketchMgr->activeSketch());
587 } else if (theType == "sketch_shape_selector") {
588 PartSet_WidgetShapeSelector* aShapeSelectorWgt =
589 new PartSet_WidgetShapeSelector(theParent, aWorkshop, theWidgetApi, theParentId);
590 aShapeSelectorWgt->setSketcher(mySketchMgr->activeSketch());
591 aWgt = aShapeSelectorWgt;
592 } else if (theType == "sketch_multi_selector") {
593 PartSet_WidgetMultiSelector* aShapeSelectorWgt =
594 new PartSet_WidgetMultiSelector(theParent, aWorkshop, theWidgetApi, theParentId);
595 aShapeSelectorWgt->setSketcher(mySketchMgr->activeSketch());
596 aWgt = aShapeSelectorWgt;
597 } else if (theType == WDG_DOUBLEVALUE_EDITOR) {
598 aWgt = new PartSet_WidgetEditor(theParent, aWorkshop, theWidgetApi, theParentId);
599 } else if (theType == "export_file_selector") {
600 aWgt = new PartSet_WidgetFileSelector(theParent, aWorkshop, theWidgetApi, theParentId);
601 } else if (theType == "sketch_launcher") {
602 aWgt = new PartSet_WidgetSketchCreator(theParent, this, theWidgetApi, theParentId);
603 } else if (theType == "module_choice") {
604 aWgt = new PartSet_WidgetChoice(theParent, theWidgetApi, theParentId);
605 connect(aWgt, SIGNAL(itemSelected(int)), SLOT(onBooleanOperationChange(int)));
610 ModuleBase_ModelWidget* PartSet_Module::activeWidget() const
612 ModuleBase_ModelWidget* anActiveWidget = 0;
614 anActiveWidget = mySketchReentrantMgr->internalActiveWidget();
615 if (!anActiveWidget) {
616 ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
618 ModuleBase_IPropertyPanel* aPanel = aOperation->propertyPanel();
619 anActiveWidget = aPanel->activeWidget();
622 return anActiveWidget;
625 bool PartSet_Module::deleteObjects()
627 bool isProcessed = false;
629 XGUI_Workshop* aWorkshop = getWorkshop();
630 XGUI_OperationMgr* anOpMgr = aWorkshop->operationMgr();
632 //SessionPtr aMgr = ModelAPI_Session::get();
633 // 1. check whether the delete should be processed in the module
634 ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
635 bool isSketchOp = PartSet_SketcherMgr::isSketchOperation(anOperation),
636 isNestedOp = PartSet_SketcherMgr::isNestedSketchOperation(anOperation);
637 if (isSketchOp || isNestedOp) {
639 // 2. find selected presentations
640 // selected objects should be collected before the current operation abort because
641 // the abort leads to selection lost on constraint objects. It can be corrected after #386 issue
642 ModuleBase_ISelection* aSel = workshop()->selection();
643 QObjectPtrList aSelectedObj = aSel->selectedPresentations();
644 // if there are no selected objects in the viewer, that means that the selection in another
645 // place cased this method. It is necessary to return the false value to understande in above
646 // method that delete is not processed
647 if (aSelectedObj.count() == 0)
650 // avoid delete of the objects, which are not belong to the current sketch
651 // in order to do not delete results of other sketches
652 QObjectPtrList aSketchObjects;
653 QObjectPtrList::const_iterator anIt = aSelectedObj.begin(), aLast = aSelectedObj.end();
654 for ( ; anIt != aLast; anIt++) {
655 ObjectPtr anObject = *anIt;
656 if (mySketchMgr->isObjectOfSketch(anObject)) {
657 // sketch feature should be used in this list because workshop deletes features only
658 // results are skipped
659 FeaturePtr aSketchFeature = ModelAPI_Feature::feature(anObject);
660 aSketchObjects.append(aSketchFeature);
663 // if the selection contains only local selected presentations from other sketches,
664 // the Delete operation should not be done at all
665 if (aSketchObjects.size() == 0)
668 // 3. start operation
669 QString aDescription = aWorkshop->contextMenuMgr()->action("DELETE_CMD")->text();
670 ModuleBase_OperationAction* anOpAction = new ModuleBase_OperationAction(aDescription, this);
672 // the active nested sketch operation should be aborted unconditionally
673 // the Delete action should be additionally granted for the Sketch operation
674 // in order to do not abort/commit it
675 if (!anOpMgr->canStartOperation(anOpAction->id()))
676 return true; // the objects are processed but can not be deleted
678 anOpMgr->startOperation(anOpAction);
680 // 4. delete features
681 // sketch feature should be skipped, only sub-features can be removed
682 // when sketch operation is active
683 aWorkshop->deleteFeatures(aSketchObjects);
685 anOpMgr->commitOperation();
690 void PartSet_Module::onFeatureTriggered()
692 QAction* aCmd = dynamic_cast<QAction*>(sender());
693 if (aCmd->isCheckable() && aCmd->isChecked()) {
694 // 1. check whether the delete should be processed in the module
695 ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
696 bool isNestedOp = PartSet_SketcherMgr::isNestedCreateOperation(anOperation);
698 // in case if in the viewer nothing is displayed, the create operation should not be
699 // comitted even if all values of the feature are initialized
700 if (!mySketchMgr->canDisplayCurrentCreatedFeature()) {
701 // the action information should be saved before the operation is aborted
702 // because this abort leads to update command status, which unchecks this action
703 anOperation->abort();
704 launchOperation(aCmd->data().toString());
708 ModuleBase_IModule::onFeatureTriggered();
711 void PartSet_Module::launchOperation(const QString& theCmdId)
713 if (myWorkshop->currentOperation() &&
714 myWorkshop->currentOperation()->id().toStdString() == SketchPlugin_Sketch::ID()) {
715 const QMap<PartSet_Tools::ConstraintVisibleState, bool>& aShownStates = mySketchMgr->showConstraintStates();
716 myHasConstraintShown = aShownStates;
718 if (PartSet_SketcherMgr::constraintsIdList().contains(theCmdId)) {
719 // Show constraints if a constraint was anOperation
720 mySketchMgr->onShowConstraintsToggle(true, PartSet_Tools::Geometrical);
721 mySketchMgr->onShowConstraintsToggle(true, PartSet_Tools::Dimensional);
723 ModuleBase_IModule::launchOperation(theCmdId);
727 void PartSet_Module::onObjectDisplayed(ObjectPtr theObject, AISObjectPtr theAIS)
729 Handle(AIS_InteractiveObject) anAIS = theAIS->impl<Handle(AIS_InteractiveObject)>();
730 if (!anAIS.IsNull()) {
731 Handle(AIS_InteractiveContext) aCtx = anAIS->GetContext();
732 Handle(AIS_Dimension) aDim = Handle(AIS_Dimension)::DownCast(anAIS);
733 if (!aDim.IsNull()) {
734 aCtx->SetZLayer(aDim, myVisualLayerId);
736 Handle(SketcherPrs_SymbolPrs) aCons = Handle(SketcherPrs_SymbolPrs)::DownCast(anAIS);
738 aCtx->SetZLayer(aCons, myVisualLayerId);
743 void PartSet_Module::onBeforeObjectErase(ObjectPtr theObject, AISObjectPtr theAIS)
746 // it should be recomputed in order to disappear in the viewer if the corresponded object
748 //if (myCustomPrs->isActive())
749 // myCustomPrs->redisplay(theObject, false);
752 void PartSet_Module::onViewTransformed(int theTrsfType)
754 // Set length of arrows constant in pixel size
755 // if the operation is panning or rotate or panglobal then do nothing
756 if ((theTrsfType == 1) || (theTrsfType == 3) || (theTrsfType == 4))
758 ModuleBase_IViewer* aViewer = myWorkshop->viewer();
759 Handle(AIS_InteractiveContext) aContext = aViewer->AISContext();
760 if (aContext.IsNull())
763 //Handle(V3d_View) aView = aViewer->activeView();
765 XGUI_Workshop* aWorkshop = getWorkshop();
766 XGUI_Displayer* aDisplayer = aWorkshop->displayer();
767 Handle(V3d_Viewer) aV3dViewer = aContext->CurrentViewer();
768 Handle(V3d_View) aView;
770 for (aV3dViewer->InitDefinedViews();
771 aV3dViewer->MoreDefinedViews();
772 aV3dViewer->NextDefinedViews()) {
773 Handle(V3d_View) aV = aV3dViewer->DefinedView();
774 double aS = aV->Scale();
782 double aLen = aView->Convert(SketcherPrs_Tools::getDefaultArrowSize());
784 double aPrevLen = SketcherPrs_Tools::getArrowSize();
785 SketcherPrs_Tools::setArrowSize(aLen);
786 const double aPrevScale = aViewer->Scale(aViewer->activeView());
787 const double aCurScale = aViewer->activeView()->Camera()->Scale();
788 aViewer->SetScale(aViewer->activeView(), aCurScale);
789 SketcherPrs_Tools::setTextHeight (aCurScale / aPrevScale * SketcherPrs_Tools::getTextHeight());
790 bool isModified = false;
791 QList<AISObjectPtr> aPrsList = aDisplayer->displayedPresentations();
792 foreach (AISObjectPtr aAIS, aPrsList) {
793 Handle(AIS_InteractiveObject) aAisObj = aAIS->impl<Handle(AIS_InteractiveObject)>();
795 Handle(AIS_Dimension) aDim = Handle(AIS_Dimension)::DownCast(aAisObj);
796 if (!aDim.IsNull()) {
797 aDim->DimensionAspect()->ArrowAspect()->SetLength(aLen);
798 aContext->Redisplay(aDim, false);
803 aDisplayer->updateViewer();
806 void PartSet_Module::activateCustomPrs(const FeaturePtr& theFeature, const ModuleBase_CustomizeFlag& theFlag,
807 const bool theUpdateViewer)
809 myCustomPrs->activate(theFeature, theFlag, theUpdateViewer);
812 void PartSet_Module::deactivateCustomPrs(const ModuleBase_CustomizeFlag& theFlag,
813 const bool theUpdateViewer)
815 myCustomPrs->deactivate(theFlag, theUpdateViewer);
818 bool PartSet_Module::customisePresentation(ResultPtr theResult, AISObjectPtr thePrs,
819 std::shared_ptr<GeomAPI_ICustomPrs> theCustomPrs)
821 bool aCustomized = false;
826 XGUI_Workshop* aWorkshop = getWorkshop();
827 XGUI_Displayer* aDisplayer = aWorkshop->displayer();
828 ObjectPtr anObject = aDisplayer->getObject(thePrs);
829 if (anObject.get()) {
830 bool isConflicting = myOverconstraintListener->isConflictingObject(anObject);
831 // customize sketcy symbol presentation
833 Handle(AIS_InteractiveObject) anAISIO = thePrs->impl<Handle(AIS_InteractiveObject)>();
834 if (!anAISIO.IsNull()) {
835 if (!Handle(SketcherPrs_SymbolPrs)::DownCast(anAISIO).IsNull()) {
836 Handle(SketcherPrs_SymbolPrs) aPrs = Handle(SketcherPrs_SymbolPrs)::DownCast(anAISIO);
837 if (!aPrs.IsNull()) {
838 std::vector<int> aColor;
839 myOverconstraintListener->getConflictingColor(aColor);
840 aPrs->SetConflictingConstraint(isConflicting, aColor);
846 // customize sketch dimension constraint presentation
848 std::vector<int> aColor;
850 myOverconstraintListener->getConflictingColor(aColor);
853 XGUI_CustomPrs::getDefaultColor(anObject, true, aColor);
854 if (!aColor.empty()) {
855 thePrs->setColor(aColor[0], aColor[1], aColor[2]);
864 bool PartSet_Module::customizeObject(ObjectPtr theObject, const ModuleBase_CustomizeFlag& theFlag,
865 const bool theUpdateViewer)
867 bool isRedisplayed = false;
868 if (myCustomPrs->isActive(theFlag))
869 isRedisplayed = myCustomPrs->redisplay(theObject, theFlag, theUpdateViewer);
871 return isRedisplayed;
874 void PartSet_Module::customizeObjectBrowser(QWidget* theObjectBrowser)
876 XGUI_ObjectsBrowser* aOB = dynamic_cast<XGUI_ObjectsBrowser*>(theObjectBrowser);
878 QLabel* aLabel = aOB->activeDocLabel();
879 aLabel->installEventFilter(myMenuMgr);
880 connect(aLabel, SIGNAL(customContextMenuRequested(const QPoint&)),
881 SLOT(onActiveDocPopup(const QPoint&)));
882 //QPalette aPalet = aLabel->palette();
883 //aPalet.setColor(QPalette::Text, QColor(0, 72, 140));
884 //aLabel->setPalette(aPalet);
885 aOB->treeView()->setExpandsOnDoubleClick(false);
886 connect(aOB->treeView(), SIGNAL(doubleClicked(const QModelIndex&)),
887 SLOT(onTreeViewDoubleClick(const QModelIndex&)));
891 void PartSet_Module::onActiveDocPopup(const QPoint& thePnt)
893 SessionPtr aMgr = ModelAPI_Session::get();
894 QAction* aActivatePartAction = myMenuMgr->action("ACTIVATE_PARTSET_CMD");
896 XGUI_Workshop* aWorkshop = getWorkshop();
897 QLabel* aHeader = aWorkshop->objectBrowser()->activeDocLabel();
899 aActivatePartAction->setEnabled((aMgr->activeDocument() != aMgr->moduleDocument()));
902 aMenu.addAction(aActivatePartAction);
903 aMenu.exec(aHeader->mapToGlobal(thePnt));
907 ObjectPtr PartSet_Module::findPresentedObject(const AISObjectPtr& theAIS) const
910 ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
912 /// If last line finished on vertex the lines creation sequence has to be break
913 ModuleBase_IPropertyPanel* aPanel = aOperation->propertyPanel();
915 ModuleBase_ModelWidget* anActiveWidget = aPanel->activeWidget();
916 // if there is an active widget, find the presented object in it
918 anActiveWidget = aPanel->preselectionWidget();
920 ModuleBase_WidgetValidated* aWidgetValidated = dynamic_cast<ModuleBase_WidgetValidated*>
922 if (aWidgetValidated)
923 anObject = aWidgetValidated->findPresentedObject(theAIS);
929 void PartSet_Module::addObjectBrowserMenu(QMenu* theMenu) const
931 QObjectPtrList aObjects = myWorkshop->selection()->selectedObjects();
932 int aSelected = aObjects.size();
933 SessionPtr aMgr = ModelAPI_Session::get();
934 QAction* aActivatePartAction = myMenuMgr->action("ACTIVATE_PART_CMD");
936 ModuleBase_Operation* aCurrentOp = myWorkshop->currentOperation();
937 if (aSelected == 1) {
938 bool hasResult = false;
939 bool hasFeature = false;
940 bool hasParameter = false;
941 bool hasSubFeature = false;
942 ModuleBase_Tools::checkObjects(aObjects, hasResult, hasFeature, hasParameter, hasSubFeature);
944 ObjectPtr aObject = aObjects.first();
946 ResultPartPtr aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aObject);
947 FeaturePtr aFeature = std::dynamic_pointer_cast<ModelAPI_Feature>(aObject);
948 bool isPart = aPart.get() ||
949 (aFeature.get() && (aFeature->getKind() == PartSetPlugin_Part::ID()));
951 DocumentPtr aPartDoc;
953 aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aFeature->firstResult());
955 if (aPart.get()) // this may be null is Part feature is disabled
956 aPartDoc = aPart->partDoc();
958 theMenu->addAction(aActivatePartAction);
959 aActivatePartAction->setEnabled((aMgr->activeDocument() != aPartDoc));
961 } else if (aObject->document() == aMgr->activeDocument()) {
962 if (hasParameter || hasFeature) {
963 myMenuMgr->action("EDIT_CMD")->setEnabled(true);
964 theMenu->addAction(myMenuMgr->action("EDIT_CMD"));
965 if (aCurrentOp && aFeature.get()) {
966 if (aCurrentOp->id().toStdString() == aFeature->getKind())
967 myMenuMgr->action("EDIT_CMD")->setEnabled(false);
972 ResultBodyPtr aResult = std::dynamic_pointer_cast<ModelAPI_ResultBody>(aObject);
974 theMenu->addAction(myMenuMgr->action("SELECT_PARENT_CMD"));
977 bool aNotDeactivate = (aCurrentOp == 0);
978 if (!aNotDeactivate) {
979 aActivatePartAction->setEnabled(false);
983 void PartSet_Module::processEvent(const std::shared_ptr<Events_Message>& theMessage)
985 if (theMessage->eventID() == Events_Loop::loop()->eventByName(EVENT_DOCUMENT_CHANGED)) {
986 // Do not change activation of parts if an operation active
987 static QStringList aAllowActivationList;
988 if (aAllowActivationList.isEmpty())
989 aAllowActivationList <<
990 QString(PartSetPlugin_Part::ID().c_str()) <<
991 QString(PartSetPlugin_Duplicate::ID().c_str()) <<
992 QString(PartSetPlugin_Remove::ID().c_str());
993 if (myWorkshop->currentOperation() &&
994 (!aAllowActivationList.contains(myWorkshop->currentOperation()->id())))
996 XGUI_Workshop* aWorkshop = getWorkshop();
997 XGUI_DataTree* aTreeView = aWorkshop->objectBrowser()->treeView();
998 QLabel* aLabel = aWorkshop->objectBrowser()->activeDocLabel();
999 QPalette aPalet = aLabel->palette();
1001 SessionPtr aMgr = ModelAPI_Session::get();
1002 DocumentPtr aActiveDoc = aMgr->activeDocument();
1003 if (aActivePartIndex.isValid())
1004 aTreeView->setExpanded(aActivePartIndex, false);
1005 XGUI_DataModel* aDataModel = aWorkshop->objectBrowser()->dataModel();
1006 aActivePartIndex = aDataModel->documentRootIndex(aActiveDoc);
1007 if (aActivePartIndex.isValid())
1008 aTreeView->setExpanded(aActivePartIndex, true);
1010 aLabel->setPalette(aPalet);
1011 aWorkshop->updateCommandStatus();
1013 // Update displayed objects in order to update active color
1014 XGUI_Displayer* aDisplayer = aWorkshop->displayer();
1015 QObjectPtrList aObjects = aDisplayer->displayedObjects();
1017 foreach(ObjectPtr aObj, aObjects) {
1018 //TODO: replace by redisplay event.
1019 aHidden = !aObj->data() || !aObj->data()->isValid() ||
1020 aObj->isDisabled() || (!aObj->isDisplayed());
1022 aDisplayer->redisplay(aObj, false);
1024 aDisplayer->updateViewer();
1028 void PartSet_Module::onTreeViewDoubleClick(const QModelIndex& theIndex)
1030 if (myWorkshop->currentOperation()) // Do not change activation of parts if an operation active
1032 SessionPtr aMgr = ModelAPI_Session::get();
1033 if (!theIndex.isValid()) {
1034 aMgr->setActiveDocument(aMgr->moduleDocument());
1037 if (theIndex.column() != 0) // Use only first column
1040 XGUI_Workshop* aWorkshop = getWorkshop();
1041 XGUI_DataModel* aDataModel = aWorkshop->objectBrowser()->dataModel();
1042 // De not use non editable Indexes
1043 if ((aDataModel->flags(theIndex) & Qt::ItemIsSelectable) == 0)
1045 ObjectPtr aObj = aDataModel->object(theIndex);
1047 ResultPartPtr aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aObj);
1048 if (!aPart.get()) { // Probably this is Feature
1049 FeaturePtr aPartFeature = std::dynamic_pointer_cast<ModelAPI_Feature>(aObj);
1050 if (aPartFeature.get() && (aPartFeature->getKind() == PartSetPlugin_Part::ID())) {
1051 aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aPartFeature->firstResult());
1054 if (aPart.get()) { // if this is a part
1055 if (aPart->partDoc() == aMgr->activeDocument()) {
1056 myMenuMgr->activatePartSet();
1064 void PartSet_Module::onViewCreated(ModuleBase_IViewWindow*)
1066 // z layer is created for all started operations in order to visualize operation AIS presentation
1068 Handle(AIS_InteractiveContext) aContext = myWorkshop->viewer()->AISContext();
1069 if (aContext.IsNull())
1072 Handle(V3d_Viewer) aViewer = aContext->CurrentViewer();
1073 if (myVisualLayerId == 0) {
1074 if (myVisualLayerId == 0)
1075 aViewer->AddZLayer(myVisualLayerId);
1077 TColStd_SequenceOfInteger aZList;
1078 aViewer->GetAllZLayers(aZList);
1079 bool aFound = false;
1080 for (int i = 1; i <= aZList.Length(); i++) {
1081 if (aZList(i) == myVisualLayerId) {
1087 aViewer->AddZLayer(myVisualLayerId);
1089 // if there is an active operation with validated widget,
1090 // the filters of this widget should be activated in the created view
1091 ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
1093 ModuleBase_ModelWidget* anActiveWidget = activeWidget();
1094 if (anActiveWidget) {
1095 ModuleBase_WidgetSelector* aWSelector = dynamic_cast<ModuleBase_WidgetSelector*>(anActiveWidget);
1097 aWSelector->activateSelectionAndFilters(true);
1102 //******************************************************
1103 void PartSet_Module::widgetStateChanged(int thePreviousState)
1105 mySketchMgr->widgetStateChanged(thePreviousState);
1108 bool PartSet_Module::processEnter(const std::string& thePreviousAttributeID)
1110 return mySketchReentrantMgr->processEnter(thePreviousAttributeID);
1113 //******************************************************
1114 void PartSet_Module::beforeOperationStarted(ModuleBase_Operation* theOperation)
1118 //******************************************************
1119 void PartSet_Module::beforeOperationStopped(ModuleBase_Operation* theOperation)
1121 if (PartSet_SketcherMgr::isSketchOperation(theOperation)) {
1122 mySketchMgr->stopSketch(theOperation);
1126 //******************************************************
1127 GeomShapePtr PartSet_Module::findShape(const AttributePtr& theAttribute)
1129 GeomShapePtr aGeomShape;
1131 ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
1132 if (anOperation && PartSet_SketcherMgr::isNestedSketchOperation(anOperation)) {
1133 aGeomShape = PartSet_Tools::findShapeBy2DPoint(theAttribute, myWorkshop);
1138 //******************************************************
1139 AttributePtr PartSet_Module::findAttribute(const ObjectPtr& theObject,
1140 const GeomShapePtr& theGeomShape)
1142 AttributePtr anAttribute;
1143 GeomShapePtr aGeomShape = theGeomShape;
1144 if (!aGeomShape.get()) {
1145 // processing shape of result, e.g. sketch circle center is selected, this is a result
1146 // the geom shape is empty, the shape of result should be used
1147 ResultPtr aResult = std::dynamic_pointer_cast<ModelAPI_Result>(theObject);
1148 if (aResult.get()) {
1149 aGeomShape = aResult->shape();
1153 if (aGeomShape.get()) {
1154 TopoDS_Shape aTDSShape = aGeomShape->impl<TopoDS_Shape>();
1155 return PartSet_Tools::findAttributeBy2dPoint(theObject, aTDSShape,
1156 mySketchMgr->activeSketch());
1161 //******************************************************
1162 void PartSet_Module::onBooleanOperationChange(int theOperation)
1164 ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
1167 ModuleBase_IPropertyPanel* aPanel = aOperation->propertyPanel();
1168 switch (theOperation) {
1170 aPanel->setWindowTitle(tr("Cut"));
1173 aPanel->setWindowTitle(tr("Fuse"));
1176 aPanel->setWindowTitle(tr("Common"));
1181 //******************************************************
1182 XGUI_Workshop* PartSet_Module::getWorkshop() const
1184 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
1185 return aConnector->workshop();