1 // Copyright (C) 2014-20xx CEA/DEN, EDF R&D
3 #include "PartSet_Module.h"
4 #include "PartSet_WidgetSketchLabel.h"
5 #include "PartSet_Validators.h"
6 #include "PartSet_Tools.h"
7 #include "PartSet_PreviewPlanes.h"
8 #include "PartSet_WidgetPoint2d.h"
9 #include "PartSet_WidgetPoint2dDistance.h"
10 #include "PartSet_WidgetPoint2DFlyout.h"
11 #include "PartSet_WidgetShapeSelector.h"
12 #include "PartSet_WidgetMultiSelector.h"
13 #include "PartSet_WidgetEditor.h"
14 #include "PartSet_WidgetFileSelector.h"
15 #include "PartSet_WidgetSketchCreator.h"
16 #include "PartSet_SketcherMgr.h"
17 #include "PartSet_SketcherReetntrantMgr.h"
18 #include "PartSet_ResultSketchPrs.h"
19 #include "PartSet_MenuMgr.h"
20 #include "PartSet_CustomPrs.h"
21 #include "PartSet_IconFactory.h"
22 #include "PartSet_WidgetChoice.h"
23 #include "PartSet_OverconstraintListener.h"
25 #include "PartSet_Filters.h"
26 #include "PartSet_FilterInfinite.h"
28 #include <PartSetPlugin_Remove.h>
29 #include <PartSetPlugin_Part.h>
30 #include <PartSetPlugin_Duplicate.h>
32 #include <ModuleBase_Operation.h>
33 #include <ModuleBase_OperationAction.h>
34 #include <ModuleBase_IViewer.h>
35 #include <ModuleBase_IViewWindow.h>
36 #include <ModuleBase_IPropertyPanel.h>
37 #include <ModuleBase_WidgetEditor.h>
38 #include <ModuleBase_WidgetValidated.h>
39 #include <ModuleBase_FilterFactory.h>
40 #include <ModuleBase_Tools.h>
41 #include <ModuleBase_OperationFeature.h>
42 #include <ModuleBase_WidgetFactory.h>
43 #include <ModuleBase_OperationDescription.h>
44 #include <ModuleBase_ViewerPrs.h>
46 #include <ModelAPI_Object.h>
47 #include <ModelAPI_Events.h>
48 #include <ModelAPI_Validator.h>
49 #include <ModelAPI_Data.h>
50 #include <ModelAPI_Session.h>
51 #include <ModelAPI_ResultBody.h>
52 #include <ModelAPI_AttributeString.h>
53 #include <ModelAPI_AttributeSelectionList.h>
55 #include <GeomDataAPI_Point2D.h>
56 #include <GeomDataAPI_Point.h>
57 #include <GeomDataAPI_Dir.h>
59 #include <XGUI_Displayer.h>
60 #include <XGUI_Workshop.h>
61 #include <XGUI_OperationMgr.h>
62 #include <XGUI_PropertyPanel.h>
63 #include <XGUI_ModuleConnector.h>
64 #include <XGUI_ContextMenuMgr.h>
65 #include <XGUI_Tools.h>
66 #include <XGUI_ObjectsBrowser.h>
67 #include <XGUI_SelectionMgr.h>
68 #include <XGUI_DataModel.h>
69 #include <XGUI_ErrorMgr.h>
70 #include <XGUI_CustomPrs.h>
71 #include <XGUI_SelectionMgr.h>
73 #include <SketchPlugin_Feature.h>
74 #include <SketchPlugin_Sketch.h>
75 #include <SketchPlugin_ConstraintAngle.h>
76 #include <SketchPlugin_ConstraintLength.h>
77 #include <SketchPlugin_ConstraintDistance.h>
78 #include <SketchPlugin_ConstraintParallel.h>
79 #include <SketchPlugin_ConstraintPerpendicular.h>
80 #include <SketchPlugin_ConstraintRadius.h>
82 #include <SketcherPrs_SymbolPrs.h>
83 #include <SketcherPrs_Tools.h>
85 #include <Events_Loop.h>
86 #include <Config_PropManager.h>
87 #include <Config_Keywords.h>
89 #include <StdSelect_TypeOfFace.hxx>
90 #include <TopoDS_Vertex.hxx>
92 #include <TopoDS_Shape.hxx>
93 #include <BRep_Tool.hxx>
94 #include <AIS_Dimension.hxx>
97 #include <QMouseEvent>
100 #include <QApplication>
101 #include <QMessageBox>
102 #include <QMainWindow>
106 #include <GeomAlgoAPI_FaceBuilder.h>
107 #include <GeomDataAPI_Dir.h>
109 #include <SelectMgr_ListIteratorOfListOfFilter.hxx>
115 /*!Create and return new instance of XGUI_Module*/
116 extern "C" PARTSET_EXPORT ModuleBase_IModule* createModule(ModuleBase_IWorkshop* theWshop)
118 return new PartSet_Module(theWshop);
121 PartSet_Module::PartSet_Module(ModuleBase_IWorkshop* theWshop)
122 : ModuleBase_IModule(theWshop),
125 new PartSet_IconFactory();
127 mySketchMgr = new PartSet_SketcherMgr(this);
128 mySketchReentrantMgr = new PartSet_SketcherReetntrantMgr(theWshop);
130 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(theWshop);
131 XGUI_Workshop* aWorkshop = aConnector->workshop();
133 ModuleBase_IViewer* aViewer = theWshop->viewer();
134 connect(aViewer, SIGNAL(keyRelease(ModuleBase_IViewWindow*, QKeyEvent*)),
135 this, SLOT(onKeyRelease(ModuleBase_IViewWindow*, QKeyEvent*)));
136 connect(aViewer, SIGNAL(viewTransformed(int)),
137 SLOT(onViewTransformed(int)));
138 connect(aViewer, SIGNAL(viewCreated(ModuleBase_IViewWindow*)),
139 SLOT(onViewCreated(ModuleBase_IViewWindow*)));
140 myMenuMgr = new PartSet_MenuMgr(this);
141 myCustomPrs = new PartSet_CustomPrs(theWshop);
143 myOverconstraintListener = new PartSet_OverconstraintListener(theWshop);
145 Events_Loop* aLoop = Events_Loop::loop();
146 aLoop->registerListener(this, Events_Loop::eventByName(EVENT_DOCUMENT_CHANGED));
148 mySelectionFilters.Append(new PartSet_GlobalFilter(myWorkshop));
149 mySelectionFilters.Append(new PartSet_FilterInfinite(myWorkshop));
151 myHasConstraintShown[PartSet_Tools::Geometrical] = true;
152 myHasConstraintShown[PartSet_Tools::Dimensional] = true;
153 myHasConstraintShown[PartSet_Tools::Expressions] = false;
155 Config_PropManager::registerProp("Visualization", "operation_parameter_color",
156 "Reference shape wireframe color in operation", Config_Prop::Color,
157 PartSet_CustomPrs::OPERATION_PARAMETER_COLOR());
158 Config_PropManager::registerProp("Visualization", "operation_result_color",
159 "Result shape wireframe color in operation", Config_Prop::Color,
160 PartSet_CustomPrs::OPERATION_RESULT_COLOR());
161 Config_PropManager::registerProp("Visualization", "operation_highlight_color",
162 "Multi selector item color in operation", Config_Prop::Color,
163 PartSet_CustomPrs::OPERATION_HIGHLIGHT_COLOR());
166 PartSet_Module::~PartSet_Module()
168 SelectMgr_ListIteratorOfListOfFilter aIt(mySelectionFilters);
169 for (; aIt.More(); aIt.Next()) {
170 Handle(SelectMgr_Filter) aFilter = aIt.Value();
171 if (!aFilter.IsNull())
175 delete myOverconstraintListener;
178 void PartSet_Module::activateSelectionFilters()
180 SelectMgr_ListIteratorOfListOfFilter aIt(mySelectionFilters);
181 for (; aIt.More(); aIt.Next()) {
182 Handle(SelectMgr_Filter) aFilter = aIt.Value();
183 if (!aFilter.IsNull())
184 myWorkshop->viewer()->addSelectionFilter(aFilter);
188 void PartSet_Module::deactivateSelectionFilters()
190 SelectMgr_ListIteratorOfListOfFilter aIt(mySelectionFilters);
191 for (; aIt.More(); aIt.Next()) {
192 Handle(SelectMgr_Filter) aFilter = aIt.Value();
193 if (!aFilter.IsNull())
194 myWorkshop->viewer()->removeSelectionFilter(aFilter);
198 void PartSet_Module::storeSelection()
200 sketchMgr()->storeSelection();
203 void PartSet_Module::restoreSelection()
205 sketchMgr()->restoreSelection();
208 void PartSet_Module::registerValidators()
210 //Registering of validators
211 SessionPtr aMgr = ModelAPI_Session::get();
212 ModelAPI_ValidatorsFactory* aFactory = aMgr->validators();
213 aFactory->registerValidator("PartSet_DistanceSelection", new PartSet_DistanceSelection);
214 aFactory->registerValidator("PartSet_LengthSelection", new PartSet_LengthSelection);
215 aFactory->registerValidator("PartSet_PerpendicularSelection", new PartSet_PerpendicularSelection);
216 aFactory->registerValidator("PartSet_ParallelSelection", new PartSet_ParallelSelection);
217 aFactory->registerValidator("PartSet_RadiusSelection", new PartSet_RadiusSelection);
218 aFactory->registerValidator("PartSet_RigidSelection", new PartSet_RigidSelection);
219 aFactory->registerValidator("PartSet_CoincidentSelection", new PartSet_CoincidentSelection);
220 aFactory->registerValidator("PartSet_HVDirSelection", new PartSet_HVDirSelection);
221 aFactory->registerValidator("PartSet_TangentSelection", new PartSet_TangentSelection);
222 aFactory->registerValidator("PartSet_FilletSelection", new PartSet_FilletSelection);
223 aFactory->registerValidator("PartSet_AngleSelection", new PartSet_AngleSelection);
224 aFactory->registerValidator("PartSet_EqualSelection", new PartSet_EqualSelection);
225 aFactory->registerValidator("PartSet_CollinearSelection", new PartSet_CollinearSelection);
226 aFactory->registerValidator("PartSet_MiddlePointSelection", new PartSet_MiddlePointSelection);
227 aFactory->registerValidator("PartSet_DifferentObjects", new PartSet_DifferentObjectsValidator);
228 aFactory->registerValidator("PartSet_CoincidentAttr", new PartSet_CoincidentAttr);
231 void PartSet_Module::registerFilters()
233 //Registering of selection filters
234 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
235 ModuleBase_FilterFactory* aFactory = aConnector->selectionFilters();
238 void PartSet_Module::registerProperties()
240 Config_PropManager::registerProp("Sketch planes", "planes_size", "Size", Config_Prop::Double,
242 Config_PropManager::registerProp("Sketch planes", "planes_thickness", "Thickness",
243 Config_Prop::Integer, SKETCH_WIDTH);
244 Config_PropManager::registerProp("Sketch planes", "rotate_to_plane", "Rotate to plane when selected",
245 Config_Prop::Boolean, "false");
248 void PartSet_Module::connectToPropertyPanel(ModuleBase_ModelWidget* theWidget, const bool isToConnect)
250 mySketchMgr->connectToPropertyPanel(theWidget, isToConnect);
253 void PartSet_Module::operationCommitted(ModuleBase_Operation* theOperation)
255 if (PartSet_SketcherMgr::isNestedSketchOperation(theOperation)) {
256 mySketchMgr->commitNestedSketch(theOperation);
259 /// Restart sketcher operations automatically
260 if (!mySketchReentrantMgr->operationCommitted(theOperation)) {
262 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>(theOperation);
263 if (aFOperation && !aFOperation->isEditOperation()) {
264 // the selection is cleared after commit the create operation
265 // in order to do not use the same selected objects in the restarted operation
266 // for common behaviour, the selection is cleared even if the operation is not restarted
267 getWorkshop()->selector()->clearSelection();
272 void PartSet_Module::operationAborted(ModuleBase_Operation* theOperation)
274 /// Restart sketcher operations automatically
275 mySketchReentrantMgr->operationAborted(theOperation);
278 void PartSet_Module::operationStarted(ModuleBase_Operation* theOperation)
280 ModuleBase_IWorkshop* anIWorkshop = workshop();
281 if (!theOperation->getDescription()->hasXmlRepresentation()) { //!< No need for property panel
282 anIWorkshop->updateCommandStatus();
285 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>
288 XGUI_Workshop* aWorkshop = XGUI_Tools::workshop(anIWorkshop);
289 XGUI_PropertyPanel* aPropertyPanel = aWorkshop->propertyPanel();
290 ModuleBase_ModelWidget* aFilledWidget = 0;
291 bool aPostonedWidgetActivation = false;
292 FeaturePtr aFeature = aFOperation->feature();
294 std::string aGreedAttributeId = ModuleBase_Tools::findGreedAttribute(anIWorkshop, aFeature);
295 // if there is a greed attribute, automatic commit by preselection for this feature is prohibited
296 aWorkshop->setPropertyPanel(aFOperation);
298 // filling the operation values by the current selection
299 // if the operation can be committed after the controls filling, the method perform should
300 // be stopped. Otherwise unnecessary presentations can be shown(e.g. operation prs in sketch)
301 bool isOperationCommitted = false;
302 if (!aFOperation->isEditOperation()) {
303 aFilledWidget = aFOperation->activateByPreselection(aGreedAttributeId);
304 if (currentOperation() != aFOperation)
305 isOperationCommitted = true;
307 if (aGreedAttributeId.empty()) {
308 // a signal should be emitted before the next widget activation
309 // because, the activation of the next widget will give a focus to the widget. As a result
310 // the value of the widget is initialized. And commit may happens until the value is entered.
312 if (mySketchReentrantMgr->canBeCommittedByPreselection())
313 isOperationCommitted = mySketchMgr->operationActivatedByPreselection();
314 // activate the next obligatory widget
315 if (!isOperationCommitted)
316 aPropertyPanel->activateNextWidget(aFilledWidget);
319 else { // there is a greed widget
320 const QList<ModuleBase_ModelWidget*>& aWidgets = aPropertyPanel->modelWidgets();
321 std::string aFirstAttributeId = aWidgets.front()->attributeID();
322 // activate next widget after greeded if it is the first widget in the panel
323 // else the first panel widget is already activated by operation start
324 if (aFirstAttributeId == aGreedAttributeId)
325 aPostonedWidgetActivation = true;
328 } if (!isOperationCommitted) {
329 anIWorkshop->updateCommandStatus();
330 aWorkshop->connectToPropertyPanel(true);
331 operationStartedInternal(aFOperation);
333 // the objects of the current operation should be deactivated
334 QObjectPtrList anObjects;
335 anObjects.append(aFeature);
336 std::list<ResultPtr> aResults = aFeature->results();
337 std::list<ResultPtr>::const_iterator aIt;
338 for (aIt = aResults.begin(); aIt != aResults.end(); ++aIt) {
339 anObjects.append(*aIt);
341 QObjectPtrList::const_iterator anIt = anObjects.begin(), aLast = anObjects.end();
342 for (; anIt != aLast; anIt++)
343 aWorkshop->deactivateActiveObject(*anIt, false);
344 if (anObjects.size() > 0) {
345 XGUI_Displayer* aDisplayer = aWorkshop->displayer();
346 aDisplayer->updateViewer();
349 if (aPostonedWidgetActivation) {
350 // if the widget is an empty in the chain of activated widgets, the current operation
351 // is restarted. It should be performed after functionality of the operation starting
352 aPropertyPanel->activateNextWidget(aFilledWidget);
358 void PartSet_Module::operationStartedInternal(ModuleBase_Operation* theOperation)
360 /// Restart sketcher operations automatically
361 mySketchReentrantMgr->operationStarted(theOperation);
363 if (PartSet_SketcherMgr::isSketchOperation(theOperation)) {
364 mySketchMgr->startSketch(theOperation);
366 else if (PartSet_SketcherMgr::isNestedSketchOperation(theOperation)) {
367 mySketchMgr->startNestedSketch(theOperation);
370 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>(theOperation);
372 myCustomPrs->activate(aFOperation->feature(), ModuleBase_IModule::CustomizeArguments, true);
373 myCustomPrs->activate(aFOperation->feature(), ModuleBase_IModule::CustomizeResults, true);
377 void PartSet_Module::operationResumed(ModuleBase_Operation* theOperation)
379 ModuleBase_IModule::operationResumed(theOperation);
381 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>(theOperation);
383 myCustomPrs->activate(aFOperation->feature(), ModuleBase_IModule::CustomizeArguments, true);
384 myCustomPrs->activate(aFOperation->feature(), ModuleBase_IModule::CustomizeResults, true);
388 void PartSet_Module::operationStopped(ModuleBase_Operation* theOperation)
390 bool isModifiedArgs = myCustomPrs->deactivate(ModuleBase_IModule::CustomizeArguments, false);
391 bool isModifiedResults = myCustomPrs->deactivate(ModuleBase_IModule::CustomizeResults, false);
392 bool isModified = isModifiedArgs || isModifiedResults;
394 if (PartSet_SketcherMgr::isNestedSketchOperation(theOperation)) {
395 mySketchMgr->stopNestedSketch(theOperation);
398 //VSV: Viewer is updated on feature update and redisplay
400 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(myWorkshop);
401 XGUI_Displayer* aDisplayer = aConnector->workshop()->displayer();
402 aDisplayer->updateViewer();
405 QMap<PartSet_Tools::ConstraintVisibleState, bool>::const_iterator anIt = myHasConstraintShown.begin(),
406 aLast = myHasConstraintShown.end();
407 for (; anIt != aLast; anIt++) {
408 myHasConstraintShown[anIt.key()];
409 mySketchMgr->updateBySketchParameters(anIt.key(), anIt.value());
413 ModuleBase_Operation* PartSet_Module::currentOperation() const
415 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
416 XGUI_OperationMgr* anOpMgr = aConnector->workshop()->operationMgr();
417 return anOpMgr->currentOperation();
420 bool PartSet_Module::canUndo() const
422 bool aCanUndo = false;
423 SessionPtr aMgr = ModelAPI_Session::get();
424 if (aMgr->hasModuleDocument() && aMgr->canUndo()) {
425 aCanUndo = !aMgr->isOperation();
426 if (!aCanUndo) // check the enable state additionally by sketch manager
427 aCanUndo = aMgr->canUndo();
432 bool PartSet_Module::canRedo() const
434 bool aCanRedo = false;
435 SessionPtr aMgr = ModelAPI_Session::get();
436 if (aMgr->hasModuleDocument() && aMgr->canRedo()) {
437 aCanRedo = !aMgr->isOperation();
438 if (!aCanRedo) // check the enable state additionally by sketch manager
439 aCanRedo = aMgr->canRedo();
444 bool PartSet_Module::canApplyAction(const ObjectPtr& theObject, const QString& theActionId) const
447 if (theActionId == "MOVE_CMD") {
448 FeaturePtr aFeature = ModelAPI_Feature::feature(theObject);
450 // part features can not be moved in the history.
451 if (aFeature->getKind() == PartSetPlugin_Part::ID())
458 bool PartSet_Module::canEraseObject(const ObjectPtr& theObject) const
460 // the sketch manager put the restriction to the objects erase
461 return mySketchMgr->canEraseObject(theObject);
464 bool PartSet_Module::canDisplayObject(const ObjectPtr& theObject) const
466 // the sketch manager put the restriction to the objects display
467 return mySketchMgr->canDisplayObject(theObject);
470 void PartSet_Module::processHiddenObject(const std::list<ObjectPtr>& theObjects)
472 mySketchMgr->processHiddenObject(theObjects);
475 bool PartSet_Module::canActivateSelection(const ObjectPtr& theObject) const
477 bool aCanActivate = ModuleBase_IModule::canActivateSelection(theObject);
479 ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
480 bool isSketchOp = PartSet_SketcherMgr::isSketchOperation(anOperation),
481 isNestedOp = PartSet_SketcherMgr::isNestedSketchOperation(anOperation);
482 if (isSketchOp || isNestedOp) {
483 // in active sketch operation it is possible to activate operation object in selection
484 // in the edit operation, e.g. points of the line can be moved when the line is edited
485 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>(anOperation);
486 aCanActivate = aCanActivate || (aFOperation && aFOperation->isEditOperation());
491 bool PartSet_Module::addViewerMenu(const QMap<QString, QAction*>& theStdActions,
493 QMap<int, QAction*>& theMenuActions) const
495 return myMenuMgr->addViewerMenu(theStdActions, theParent, theMenuActions);
498 void PartSet_Module::updateViewerMenu(const QMap<QString, QAction*>& theStdActions)
500 myMenuMgr->updateViewerMenu(theStdActions);
503 QString PartSet_Module::getFeatureError(const FeaturePtr& theFeature)
505 QString anError = ModuleBase_IModule::getFeatureError(theFeature);
506 if (anError.isEmpty())
507 anError = sketchMgr()->getFeatureError(theFeature);
512 void PartSet_Module::grantedOperationIds(ModuleBase_Operation* theOperation,
513 QStringList& theIds) const
515 myMenuMgr->grantedOperationIds(theOperation, theIds);
517 if (PartSet_SketcherMgr::isSketchOperation(theOperation)) {
518 XGUI_Workshop* aWorkshop = getWorkshop();
519 theIds.append(aWorkshop->contextMenuMgr()->action("DELETE_CMD")->text());
523 void PartSet_Module::activeSelectionModes(QIntList& theModes)
526 if (mySketchMgr->activeSketch().get())
527 PartSet_SketcherMgr::sketchSelectionModes(theModes);
530 bool PartSet_Module::isMouseOverWindow()
532 return mySketchMgr->isMouseOverWindow();
535 void PartSet_Module::closeDocument()
540 void PartSet_Module::clearViewer()
542 myCustomPrs->clearPrs();
544 XGUI_Workshop* aWorkshop = getWorkshop();
545 XGUI_Displayer* aDisplayer = aWorkshop->displayer();
546 aDisplayer->deactivateSelectionFilters();
549 void PartSet_Module::propertyPanelDefined(ModuleBase_Operation* theOperation)
551 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>(theOperation);
555 ModuleBase_IPropertyPanel* aPanel = aFOperation->propertyPanel();
556 // we have to manually activate the sketch label in edit mode
557 if (PartSet_SketcherMgr::isSketchOperation(aFOperation) && (aFOperation->isEditOperation()))
558 aPanel->activateWidget(aPanel->modelWidgets().first());
561 bool PartSet_Module::createWidgets(ModuleBase_Operation* theOperation,
562 QList<ModuleBase_ModelWidget*>& theWidgets) const
564 bool aProcessed = false;
566 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>(theOperation);
567 XGUI_Workshop* aWorkshop = getWorkshop();
568 XGUI_PropertyPanel* aPropertyPanel = aWorkshop->propertyPanel();
569 if (mySketchMgr->activeSketch().get() && aFOperation && aPropertyPanel) {
570 ModuleBase_ISelection* aSelection = workshop()->selection();
571 // click on a point in sketch leads here with the point is highlighted, not yet selected
572 QList<ModuleBase_ViewerPrsPtr> aPreselection = aSelection->getHighlighted();
573 if (aPreselection.size() == 1) {
574 ModuleBase_ViewerPrsPtr aSelectedPrs = aPreselection[0];
575 ObjectPtr anObject = aSelectedPrs->object();
577 FeaturePtr aFeature = ModelAPI_Feature::feature(anObject);
578 FeaturePtr anOpFeature = aFOperation->feature();
579 GeomShapePtr aShape = aSelectedPrs->shape();
580 // click on the digit of dimension constrain comes here with an empty shape, so we need the check
581 if (aFeature == anOpFeature && aShape.get() && !aShape->isNull()) {
582 const TopoDS_Shape& aTDShape = aShape->impl<TopoDS_Shape>();
583 AttributePtr anAttribute = PartSet_Tools::findAttributeBy2dPoint(anObject, aTDShape,
584 mySketchMgr->activeSketch());
585 if (anAttribute.get()) {
586 QString aXmlRepr = aFOperation->getDescription()->xmlRepresentation();
587 ModuleBase_WidgetFactory aFactory(aXmlRepr.toStdString(), workshop());
589 const std::string anAttributeId = anAttribute->id();
590 aFactory.createWidget(aPropertyPanel->contentWidget(), anAttributeId);
592 theWidgets = aFactory.getModelWidgets();
593 // it is possible that the point does not present in XML definition,
594 // in this case, we assume that it is not processed by this module
595 // e.g. "Intersection point" feature
596 aProcessed = !theWidgets.isEmpty();
604 void PartSet_Module::onSelectionChanged()
606 ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
610 bool isSketcherOp = false;
611 // An edit operation is enable only if the current opeation is the sketch operation
612 if (mySketchMgr->activeSketch()) {
613 if (PartSet_Tools::sketchPlane(mySketchMgr->activeSketch()))
614 isSketcherOp = PartSet_SketcherMgr::isSketchOperation(aOperation);
617 // Editing of constraints can be done on selection
618 ModuleBase_ISelection* aSelect = myWorkshop->selection();
619 QList<ModuleBase_ViewerPrsPtr> aSelected = aSelect->getSelected();
620 if (aSelected.size() == 1) {
621 ModuleBase_ViewerPrsPtr aPrs = aSelected.first();
622 ObjectPtr aObject = aPrs->object();
623 FeaturePtr aFeature = ModelAPI_Feature::feature(aObject);
625 std::string aId = aFeature->getKind();
626 if ((aId == SketchPlugin_ConstraintRadius::ID()) ||
627 (aId == SketchPlugin_ConstraintLength::ID()) ||
628 (aId == SketchPlugin_ConstraintDistance::ID()) ||
629 (aId == SketchPlugin_ConstraintAngle::ID())) {
630 editFeature(aFeature);
637 void PartSet_Module::onKeyRelease(ModuleBase_IViewWindow* theWnd, QKeyEvent* theEvent)
639 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
640 XGUI_OperationMgr* anOpMgr = aConnector->workshop()->operationMgr();
641 anOpMgr->onKeyReleased(theWnd->viewPort(), theEvent);
644 ModuleBase_ModelWidget* PartSet_Module::createWidgetByType(const std::string& theType,
646 Config_WidgetAPI* theWidgetApi)
648 ModuleBase_IWorkshop* aWorkshop = workshop();
649 XGUI_Workshop* aXUIWorkshop = getWorkshop();
650 ModuleBase_ModelWidget* aWgt = NULL;
651 if (theType == "sketch-start-label") {
652 PartSet_WidgetSketchLabel* aLabelWgt = new PartSet_WidgetSketchLabel(theParent, aWorkshop,
653 theWidgetApi, myHasConstraintShown);
654 connect(aLabelWgt, SIGNAL(planeSelected(const std::shared_ptr<GeomAPI_Pln>&)),
655 mySketchMgr, SLOT(onPlaneSelected(const std::shared_ptr<GeomAPI_Pln>&)));
656 connect(aLabelWgt, SIGNAL(showConstraintToggled(int, bool)),
657 mySketchMgr, SLOT(onShowConstraintsToggle(int, bool)));
659 } else if (theType == "sketch-2dpoint_selector") {
660 PartSet_WidgetPoint2D* aPointWgt = new PartSet_WidgetPoint2D(theParent, aWorkshop,
662 aPointWgt->setSketch(mySketchMgr->activeSketch());
663 connect(aPointWgt, SIGNAL(vertexSelected()), sketchReentranceMgr(), SLOT(onVertexSelected()));
665 }else if (theType == "sketch-2dpoint_flyout_selector") {
666 PartSet_WidgetPoint2DFlyout* aPointWgt = new PartSet_WidgetPoint2DFlyout(theParent, aWorkshop,
668 aPointWgt->setSketch(mySketchMgr->activeSketch());
669 connect(aPointWgt, SIGNAL(vertexSelected()), sketchReentranceMgr(), SLOT(onVertexSelected()));
671 } else if (theType == "point2ddistance") {
672 PartSet_WidgetPoint2dDistance* aDistanceWgt = new PartSet_WidgetPoint2dDistance(theParent,
673 aWorkshop, theWidgetApi);
674 aDistanceWgt->setSketch(mySketchMgr->activeSketch());
676 } else if (theType == "sketch_shape_selector") {
677 PartSet_WidgetShapeSelector* aShapeSelectorWgt =
678 new PartSet_WidgetShapeSelector(theParent, aWorkshop, theWidgetApi);
679 aShapeSelectorWgt->setSketcher(mySketchMgr->activeSketch());
680 aWgt = aShapeSelectorWgt;
681 } else if (theType == "sketch_multi_selector") {
682 PartSet_WidgetMultiSelector* aShapeSelectorWgt =
683 new PartSet_WidgetMultiSelector(theParent, aWorkshop, theWidgetApi);
684 aShapeSelectorWgt->setSketcher(mySketchMgr->activeSketch());
685 aWgt = aShapeSelectorWgt;
687 else if (theType == WDG_DOUBLEVALUE_EDITOR) {
688 aWgt = new PartSet_WidgetEditor(theParent, aWorkshop, theWidgetApi);
689 } else if (theType == "export_file_selector") {
690 aWgt = new PartSet_WidgetFileSelector(theParent, aWorkshop, theWidgetApi);
691 } else if (theType == "sketch_launcher") {
692 aWgt = new PartSet_WidgetSketchCreator(theParent, this, theWidgetApi);
693 } else if (theType == "module_choice") {
694 aWgt = new PartSet_WidgetChoice(theParent, theWidgetApi);
695 connect(aWgt, SIGNAL(itemSelected(ModuleBase_ModelWidget*, int)),
696 this, SLOT(onChoiceChanged(ModuleBase_ModelWidget*, int)));
701 ModuleBase_ModelWidget* PartSet_Module::activeWidget() const
703 ModuleBase_ModelWidget* anActiveWidget = 0;
705 anActiveWidget = mySketchReentrantMgr->internalActiveWidget();
706 if (!anActiveWidget) {
707 ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
709 ModuleBase_IPropertyPanel* aPanel = aOperation->propertyPanel();
710 anActiveWidget = aPanel->activeWidget();
713 return anActiveWidget;
716 bool PartSet_Module::deleteObjects()
718 bool isProcessed = false;
720 XGUI_Workshop* aWorkshop = getWorkshop();
721 XGUI_OperationMgr* anOpMgr = aWorkshop->operationMgr();
723 //SessionPtr aMgr = ModelAPI_Session::get();
724 // 1. check whether the delete should be processed in the module
725 ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
726 bool isSketchOp = PartSet_SketcherMgr::isSketchOperation(anOperation),
727 isNestedOp = PartSet_SketcherMgr::isNestedSketchOperation(anOperation);
728 if (isSketchOp || isNestedOp) {
730 // 2. find selected presentations
731 // selected objects should be collected before the current operation abort because
732 // the abort leads to selection lost on constraint objects. It can be corrected after #386 issue
733 ModuleBase_ISelection* aSel = workshop()->selection();
734 QObjectPtrList aSelectedObj = aSel->selectedPresentations();
735 // if there are no selected objects in the viewer, that means that the selection in another
736 // place cased this method. It is necessary to return the false value to understande in above
737 // method that delete is not processed
738 if (aSelectedObj.count() == 0)
741 // avoid delete of the objects, which are not belong to the current sketch
742 // in order to do not delete results of other sketches
743 QObjectPtrList aSketchObjects;
744 QObjectPtrList::const_iterator anIt = aSelectedObj.begin(), aLast = aSelectedObj.end();
745 for ( ; anIt != aLast; anIt++) {
746 ObjectPtr anObject = *anIt;
747 if (mySketchMgr->isObjectOfSketch(anObject)) {
748 // sketch feature should be used in this list because workshop deletes features only
749 // results are skipped
750 FeaturePtr aSketchFeature = ModelAPI_Feature::feature(anObject);
751 aSketchObjects.append(aSketchFeature);
754 // if the selection contains only local selected presentations from other sketches,
755 // the Delete operation should not be done at all
756 if (aSketchObjects.size() == 0)
759 // 3. start operation
760 QString aDescription = aWorkshop->contextMenuMgr()->action("DELETE_CMD")->text();
761 ModuleBase_OperationAction* anOpAction = new ModuleBase_OperationAction(aDescription, this);
763 // the active nested sketch operation should be aborted unconditionally
764 // the Delete action should be additionally granted for the Sketch operation
765 // in order to do not abort/commit it
766 if (!anOpMgr->canStartOperation(anOpAction->id()))
767 return true; // the objects are processed but can not be deleted
769 anOpMgr->startOperation(anOpAction);
771 // WORKAROUND, should be done to avoid viewer highlight update after deletetion of objects
772 // the problem is in AIS Dimensions recompute if a line and the dim are removed, line is the first
773 // it causes the AIS recompute, where the base line is null, the result is empty AIS in the viewer
774 XGUI_Tools::workshop(myWorkshop)->selector()->clearSelection();
776 // 4. delete features
777 // sketch feature should be skipped, only sub-features can be removed
778 // when sketch operation is active
779 aWorkshop->deleteFeatures(aSketchObjects);
781 anOpMgr->commitOperation();
786 void PartSet_Module::onFeatureTriggered()
788 QAction* aCmd = dynamic_cast<QAction*>(sender());
789 if (aCmd->isCheckable() && aCmd->isChecked()) {
790 // 1. check whether the delete should be processed in the module
791 ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
792 bool isNestedOp = PartSet_SketcherMgr::isNestedCreateOperation(anOperation);
794 // in case if in the viewer nothing is displayed, the create operation should not be
795 // comitted even if all values of the feature are initialized
796 if (!mySketchMgr->canDisplayCurrentCreatedFeature()) {
797 // the action information should be saved before the operation is aborted
798 // because this abort leads to update command status, which unchecks this action
799 anOperation->abort();
800 launchOperation(aCmd->data().toString());
804 ModuleBase_IModule::onFeatureTriggered();
807 void PartSet_Module::editFeature(FeaturePtr theFeature)
809 storeConstraintsState(theFeature->getKind());
810 ModuleBase_IModule::editFeature(theFeature);
813 bool PartSet_Module::canCommitOperation() const
818 void PartSet_Module::launchOperation(const QString& theCmdId)
820 storeConstraintsState(theCmdId.toStdString());
821 ModuleBase_IModule::launchOperation(theCmdId);
824 void PartSet_Module::storeConstraintsState(const std::string& theFeatureKind)
826 if (myWorkshop->currentOperation() &&
827 myWorkshop->currentOperation()->id().toStdString() == SketchPlugin_Sketch::ID()) {
828 const QMap<PartSet_Tools::ConstraintVisibleState, bool>& aShownStates =
829 mySketchMgr->showConstraintStates();
830 myHasConstraintShown = aShownStates;
832 if (PartSet_SketcherMgr::constraintsIdList().contains(theFeatureKind.c_str())) {
833 // Show constraints if a constraint was anOperation
834 mySketchMgr->updateBySketchParameters(PartSet_Tools::Geometrical, true);
835 mySketchMgr->updateBySketchParameters(PartSet_Tools::Dimensional, true);
836 mySketchMgr->updateBySketchParameters(PartSet_Tools::Expressions,
837 myHasConstraintShown[PartSet_Tools::Expressions]);
841 void PartSet_Module::onObjectDisplayed(ObjectPtr theObject, AISObjectPtr theAIS)
843 Handle(AIS_InteractiveObject) anAIS = theAIS->impl<Handle(AIS_InteractiveObject)>();
844 if (!anAIS.IsNull()) {
845 Handle(AIS_InteractiveContext) aCtx = anAIS->GetContext();
846 Handle(AIS_Dimension) aDim = Handle(AIS_Dimension)::DownCast(anAIS);
847 if (!aDim.IsNull()) {
848 aCtx->SetZLayer(aDim, myVisualLayerId);
850 Handle(SketcherPrs_SymbolPrs) aCons = Handle(SketcherPrs_SymbolPrs)::DownCast(anAIS);
852 aCtx->SetZLayer(aCons, myVisualLayerId);
857 void PartSet_Module::onBeforeObjectErase(ObjectPtr theObject, AISObjectPtr theAIS)
860 // it should be recomputed in order to disappear in the viewer if the corresponded object
862 //if (myCustomPrs->isActive())
863 // myCustomPrs->redisplay(theObject, false);
866 void PartSet_Module::onViewTransformed(int theTrsfType)
868 // Set length of arrows constant in pixel size
869 // if the operation is panning or rotate or panglobal then do nothing
870 if ((theTrsfType == 1) || (theTrsfType == 3) || (theTrsfType == 4))
872 ModuleBase_IViewer* aViewer = myWorkshop->viewer();
873 Handle(AIS_InteractiveContext) aContext = aViewer->AISContext();
874 if (aContext.IsNull())
877 //Handle(V3d_View) aView = aViewer->activeView();
879 XGUI_Workshop* aWorkshop = getWorkshop();
880 XGUI_Displayer* aDisplayer = aWorkshop->displayer();
881 Handle(V3d_Viewer) aV3dViewer = aContext->CurrentViewer();
882 Handle(V3d_View) aView;
884 for (aV3dViewer->InitDefinedViews();
885 aV3dViewer->MoreDefinedViews();
886 aV3dViewer->NextDefinedViews()) {
887 Handle(V3d_View) aV = aV3dViewer->DefinedView();
888 double aS = aV->Scale();
896 double aLen = aView->Convert(SketcherPrs_Tools::getDefaultArrowSize());
898 double aPrevLen = SketcherPrs_Tools::getArrowSize();
899 SketcherPrs_Tools::setArrowSize(aLen);
900 const double aPrevScale = aViewer->Scale(aViewer->activeView());
901 const double aCurScale = aViewer->activeView()->Camera()->Scale();
902 aViewer->SetScale(aViewer->activeView(), aCurScale);
903 SketcherPrs_Tools::setTextHeight (aCurScale / aPrevScale * SketcherPrs_Tools::getTextHeight());
904 bool isModified = false;
905 QList<AISObjectPtr> aPrsList = aDisplayer->displayedPresentations();
906 foreach (AISObjectPtr aAIS, aPrsList) {
907 Handle(AIS_InteractiveObject) aAisObj = aAIS->impl<Handle(AIS_InteractiveObject)>();
909 Handle(AIS_Dimension) aDim = Handle(AIS_Dimension)::DownCast(aAisObj);
910 if (!aDim.IsNull()) {
911 aDim->DimensionAspect()->ArrowAspect()->SetLength(aLen);
912 aContext->Redisplay(aDim, false);
917 aDisplayer->updateViewer();
920 void PartSet_Module::activateCustomPrs(const FeaturePtr& theFeature, const ModuleBase_CustomizeFlag& theFlag,
921 const bool theUpdateViewer)
923 myCustomPrs->activate(theFeature, theFlag, theUpdateViewer);
926 void PartSet_Module::deactivateCustomPrs(const ModuleBase_CustomizeFlag& theFlag,
927 const bool theUpdateViewer)
929 myCustomPrs->deactivate(theFlag, theUpdateViewer);
932 bool PartSet_Module::customisePresentation(ResultPtr theResult, AISObjectPtr thePrs,
933 std::shared_ptr<GeomAPI_ICustomPrs> theCustomPrs)
935 bool aCustomized = false;
940 XGUI_Workshop* aWorkshop = getWorkshop();
941 XGUI_Displayer* aDisplayer = aWorkshop->displayer();
942 ObjectPtr anObject = aDisplayer->getObject(thePrs);
943 if (anObject.get()) {
944 bool isConflicting = myOverconstraintListener->isConflictingObject(anObject);
945 // customize sketch symbol presentation
947 Handle(AIS_InteractiveObject) anAISIO = thePrs->impl<Handle(AIS_InteractiveObject)>();
948 if (!anAISIO.IsNull()) {
949 if (!Handle(SketcherPrs_SymbolPrs)::DownCast(anAISIO).IsNull()) {
950 Handle(SketcherPrs_SymbolPrs) aPrs = Handle(SketcherPrs_SymbolPrs)::DownCast(anAISIO);
951 if (!aPrs.IsNull()) {
952 std::vector<int> aColor;
953 myOverconstraintListener->getConflictingColor(aColor);
954 aPrs->SetConflictingConstraint(isConflicting, aColor);
960 // customize sketch dimension constraint presentation
962 std::vector<int> aColor;
964 myOverconstraintListener->getConflictingColor(aColor);
967 XGUI_CustomPrs::getDefaultColor(anObject, true, aColor);
968 if (!aColor.empty()) {
969 thePrs->setColor(aColor[0], aColor[1], aColor[2]);
974 // customize dimentional constrains
975 sketchMgr()->customizePresentation(anObject);
981 bool PartSet_Module::customizeObject(ObjectPtr theObject, const ModuleBase_CustomizeFlag& theFlag,
982 const bool theUpdateViewer)
984 bool isRedisplayed = false;
985 if (myCustomPrs->isActive(theFlag))
986 isRedisplayed = myCustomPrs->redisplay(theObject, theFlag, theUpdateViewer);
988 return isRedisplayed;
991 void PartSet_Module::customizeObjectBrowser(QWidget* theObjectBrowser)
993 XGUI_ObjectsBrowser* aOB = dynamic_cast<XGUI_ObjectsBrowser*>(theObjectBrowser);
995 QLabel* aLabel = aOB->activeDocLabel();
996 aLabel->installEventFilter(myMenuMgr);
997 connect(aLabel, SIGNAL(customContextMenuRequested(const QPoint&)),
998 SLOT(onActiveDocPopup(const QPoint&)));
999 //QPalette aPalet = aLabel->palette();
1000 //aPalet.setColor(QPalette::Text, QColor(0, 72, 140));
1001 //aLabel->setPalette(aPalet);
1002 aOB->treeView()->setExpandsOnDoubleClick(false);
1003 connect(aOB->treeView(), SIGNAL(doubleClicked(const QModelIndex&)),
1004 SLOT(onTreeViewDoubleClick(const QModelIndex&)));
1008 void PartSet_Module::onActiveDocPopup(const QPoint& thePnt)
1010 SessionPtr aMgr = ModelAPI_Session::get();
1011 QAction* aActivatePartAction = myMenuMgr->action("ACTIVATE_PARTSET_CMD");
1013 XGUI_Workshop* aWorkshop = getWorkshop();
1014 QLabel* aHeader = aWorkshop->objectBrowser()->activeDocLabel();
1016 aActivatePartAction->setEnabled((aMgr->activeDocument() != aMgr->moduleDocument()));
1019 aMenu.addAction(aActivatePartAction);
1020 aMenu.exec(aHeader->mapToGlobal(thePnt));
1023 Handle(AIS_InteractiveObject) PartSet_Module::createPresentation(const ResultPtr& theResult)
1025 return mySketchMgr->createPresentation(theResult);
1029 ObjectPtr PartSet_Module::findPresentedObject(const AISObjectPtr& theAIS) const
1032 ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
1034 /// If last line finished on vertex the lines creation sequence has to be break
1035 ModuleBase_IPropertyPanel* aPanel = aOperation->propertyPanel();
1037 ModuleBase_ModelWidget* anActiveWidget = aPanel->activeWidget();
1038 // if there is an active widget, find the presented object in it
1039 if (!anActiveWidget)
1040 anActiveWidget = aPanel->preselectionWidget();
1042 ModuleBase_WidgetValidated* aWidgetValidated = dynamic_cast<ModuleBase_WidgetValidated*>
1044 if (aWidgetValidated)
1045 anObject = aWidgetValidated->findPresentedObject(theAIS);
1051 bool PartSet_Module::canBeShaded(Handle(AIS_InteractiveObject) theAIS) const
1053 bool aCanBeShaged = true;
1055 Handle(PartSet_ResultSketchPrs) aPrs = Handle(PartSet_ResultSketchPrs)::DownCast(theAIS);
1057 aCanBeShaged = false;
1059 return aCanBeShaged;
1062 void PartSet_Module::addObjectBrowserMenu(QMenu* theMenu) const
1064 QObjectPtrList aObjects = myWorkshop->selection()->selectedObjects();
1065 int aSelected = aObjects.size();
1066 SessionPtr aMgr = ModelAPI_Session::get();
1067 QAction* aActivatePartAction = myMenuMgr->action("ACTIVATE_PART_CMD");
1069 ModuleBase_Operation* aCurrentOp = myWorkshop->currentOperation();
1070 if (aSelected == 1) {
1071 bool hasResult = false;
1072 bool hasFeature = false;
1073 bool hasParameter = false;
1074 bool hasCompositeOwner = false;
1075 ModuleBase_Tools::checkObjects(aObjects, hasResult, hasFeature, hasParameter,
1077 ObjectPtr aObject = aObjects.first();
1079 ResultPartPtr aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aObject);
1080 FeaturePtr aFeature = std::dynamic_pointer_cast<ModelAPI_Feature>(aObject);
1081 bool isPart = aPart.get() ||
1082 (aFeature.get() && (aFeature->getKind() == PartSetPlugin_Part::ID()));
1084 DocumentPtr aPartDoc;
1086 aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aFeature->firstResult());
1088 if (aPart.get()) // this may be null is Part feature is disabled
1089 aPartDoc = aPart->partDoc();
1091 theMenu->addAction(aActivatePartAction);
1092 aActivatePartAction->setEnabled((aMgr->activeDocument() != aPartDoc));
1094 } else if (aObject->document() == aMgr->activeDocument()) {
1095 if (hasParameter || hasFeature) {
1096 myMenuMgr->action("EDIT_CMD")->setEnabled(true);
1097 theMenu->addAction(myMenuMgr->action("EDIT_CMD"));
1098 if (aCurrentOp && aFeature.get()) {
1099 if (aCurrentOp->id().toStdString() == aFeature->getKind())
1100 myMenuMgr->action("EDIT_CMD")->setEnabled(false);
1105 ResultBodyPtr aResult = std::dynamic_pointer_cast<ModelAPI_ResultBody>(aObject);
1107 theMenu->addAction(myMenuMgr->action("SELECT_PARENT_CMD"));
1110 bool aNotDeactivate = (aCurrentOp == 0);
1111 if (!aNotDeactivate) {
1112 aActivatePartAction->setEnabled(false);
1116 void PartSet_Module::processEvent(const std::shared_ptr<Events_Message>& theMessage)
1118 if (theMessage->eventID() == Events_Loop::loop()->eventByName(EVENT_DOCUMENT_CHANGED)) {
1119 // Do not change activation of parts if an operation active
1120 static QStringList aAllowActivationList;
1121 if (aAllowActivationList.isEmpty())
1122 aAllowActivationList <<
1123 QString(PartSetPlugin_Part::ID().c_str()) <<
1124 QString(PartSetPlugin_Duplicate::ID().c_str()) <<
1125 QString(PartSetPlugin_Remove::ID().c_str());
1126 if (myWorkshop->currentOperation() &&
1127 (!aAllowActivationList.contains(myWorkshop->currentOperation()->id())))
1129 XGUI_Workshop* aWorkshop = getWorkshop();
1130 XGUI_DataTree* aTreeView = aWorkshop->objectBrowser()->treeView();
1131 QLabel* aLabel = aWorkshop->objectBrowser()->activeDocLabel();
1132 QPalette aPalet = aLabel->palette();
1134 SessionPtr aMgr = ModelAPI_Session::get();
1135 DocumentPtr aActiveDoc = aMgr->activeDocument();
1136 if (aActivePartIndex.isValid())
1137 aTreeView->setExpanded(aActivePartIndex, false);
1138 XGUI_DataModel* aDataModel = aWorkshop->objectBrowser()->dataModel();
1139 aActivePartIndex = aDataModel->documentRootIndex(aActiveDoc);
1140 if (aActivePartIndex.isValid())
1141 aTreeView->setExpanded(aActivePartIndex, true);
1143 aLabel->setPalette(aPalet);
1144 aWorkshop->updateCommandStatus();
1146 // Update displayed objects in order to update active color
1147 XGUI_Displayer* aDisplayer = aWorkshop->displayer();
1148 QObjectPtrList aObjects = aDisplayer->displayedObjects();
1150 foreach(ObjectPtr aObj, aObjects) {
1151 //TODO: replace by redisplay event.
1152 aHidden = !aObj->data() || !aObj->data()->isValid() ||
1153 aObj->isDisabled() || (!aObj->isDisplayed());
1155 aDisplayer->redisplay(aObj, false);
1157 aDisplayer->updateViewer();
1161 void PartSet_Module::onTreeViewDoubleClick(const QModelIndex& theIndex)
1163 if (myWorkshop->currentOperation()) // Do not change activation of parts if an operation active
1165 SessionPtr aMgr = ModelAPI_Session::get();
1166 if (!theIndex.isValid()) {
1167 aMgr->setActiveDocument(aMgr->moduleDocument());
1170 if (theIndex.column() != 0) // Use only first column
1173 XGUI_Workshop* aWorkshop = getWorkshop();
1174 XGUI_DataModel* aDataModel = aWorkshop->objectBrowser()->dataModel();
1175 // De not use non editable Indexes
1176 if ((aDataModel->flags(theIndex) & Qt::ItemIsSelectable) == 0)
1178 ObjectPtr aObj = aDataModel->object(theIndex);
1180 ResultPartPtr aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aObj);
1181 if (!aPart.get()) { // Probably this is Feature
1182 FeaturePtr aPartFeature = std::dynamic_pointer_cast<ModelAPI_Feature>(aObj);
1183 if (aPartFeature.get() && (aPartFeature->getKind() == PartSetPlugin_Part::ID())) {
1184 aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aPartFeature->firstResult());
1187 if (aPart.get()) { // if this is a part
1188 if (aPart->partDoc() == aMgr->activeDocument()) {
1189 myMenuMgr->activatePartSet();
1197 void PartSet_Module::onViewCreated(ModuleBase_IViewWindow*)
1199 // z layer is created for all started operations in order to visualize operation AIS presentation
1201 Handle(AIS_InteractiveContext) aContext = myWorkshop->viewer()->AISContext();
1202 if (aContext.IsNull())
1205 Handle(V3d_Viewer) aViewer = aContext->CurrentViewer();
1206 if (myVisualLayerId == 0) {
1207 if (myVisualLayerId == 0)
1208 aViewer->AddZLayer(myVisualLayerId);
1210 TColStd_SequenceOfInteger aZList;
1211 aViewer->GetAllZLayers(aZList);
1212 bool aFound = false;
1213 for (int i = 1; i <= aZList.Length(); i++) {
1214 if (aZList(i) == myVisualLayerId) {
1220 aViewer->AddZLayer(myVisualLayerId);
1222 // if there is an active operation with validated widget,
1223 // the filters of this widget should be activated in the created view
1224 ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
1226 ModuleBase_ModelWidget* anActiveWidget = activeWidget();
1227 if (anActiveWidget) {
1228 ModuleBase_WidgetSelector* aWSelector = dynamic_cast<ModuleBase_WidgetSelector*>(anActiveWidget);
1230 aWSelector->activateSelectionAndFilters(true);
1235 //******************************************************
1236 void PartSet_Module::widgetStateChanged(int thePreviousState)
1238 mySketchMgr->widgetStateChanged(thePreviousState);
1241 bool PartSet_Module::processEnter(const std::string& thePreviousAttributeID)
1243 return mySketchReentrantMgr->processEnter(thePreviousAttributeID);
1246 //******************************************************
1247 void PartSet_Module::beforeOperationStarted(ModuleBase_Operation* theOperation)
1251 //******************************************************
1252 void PartSet_Module::beforeOperationStopped(ModuleBase_Operation* theOperation)
1254 if (PartSet_SketcherMgr::isSketchOperation(theOperation)) {
1255 mySketchMgr->stopSketch(theOperation);
1259 //******************************************************
1260 GeomShapePtr PartSet_Module::findShape(const AttributePtr& theAttribute)
1262 GeomShapePtr aGeomShape;
1264 ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
1265 if (anOperation && PartSet_SketcherMgr::isNestedSketchOperation(anOperation)) {
1266 aGeomShape = PartSet_Tools::findShapeBy2DPoint(theAttribute, myWorkshop);
1271 //******************************************************
1272 AttributePtr PartSet_Module::findAttribute(const ObjectPtr& theObject,
1273 const GeomShapePtr& theGeomShape)
1275 AttributePtr anAttribute;
1276 GeomShapePtr aGeomShape = theGeomShape;
1277 if (!aGeomShape.get()) {
1278 // processing shape of result, e.g. sketch circle center is selected, this is a result
1279 // the geom shape is empty, the shape of result should be used
1280 ResultPtr aResult = std::dynamic_pointer_cast<ModelAPI_Result>(theObject);
1281 if (aResult.get()) {
1282 aGeomShape = aResult->shape();
1286 if (aGeomShape.get()) {
1287 TopoDS_Shape aTDSShape = aGeomShape->impl<TopoDS_Shape>();
1288 return PartSet_Tools::findAttributeBy2dPoint(theObject, aTDSShape,
1289 mySketchMgr->activeSketch());
1294 //******************************************************
1295 void PartSet_Module::onChoiceChanged(ModuleBase_ModelWidget* theWidget,
1298 PartSet_WidgetChoice* aChoiceWidget = dynamic_cast<PartSet_WidgetChoice*>(theWidget);
1302 QString aChoiceTitle = aChoiceWidget->getPropertyPanelTitle(theIndex);
1303 if (!aChoiceTitle.isEmpty()) {
1304 ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
1307 ModuleBase_IPropertyPanel* aPanel = aOperation->propertyPanel();
1308 aPanel->setWindowTitle(aChoiceTitle);
1312 //******************************************************
1313 XGUI_Workshop* PartSet_Module::getWorkshop() const
1315 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
1316 return aConnector->workshop();