1 // Copyright (C) 2014-2020 CEA/DEN, EDF R&D
3 // This library is free software; you can redistribute it and/or
4 // modify it under the terms of the GNU Lesser General Public
5 // License as published by the Free Software Foundation; either
6 // version 2.1 of the License, or (at your option) any later version.
8 // This library is distributed in the hope that it will be useful,
9 // but WITHOUT ANY WARRANTY; without even the implied warranty of
10 // MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
11 // Lesser General Public License for more details.
13 // You should have received a copy of the GNU Lesser General Public
14 // License along with this library; if not, write to the Free Software
15 // Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
17 // See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
20 #include "PartSet_Module.h"
21 #include "PartSet_WidgetSketchLabel.h"
22 #include "PartSet_Validators.h"
23 #include "PartSet_Tools.h"
24 #include "PartSet_PreviewPlanes.h"
25 #include "PartSet_WidgetBSplinePoints.h"
26 #include "PartSet_WidgetPoint2d.h"
27 #include "PartSet_WidgetPoint2DFlyout.h"
28 #include "PartSet_WidgetShapeSelector.h"
29 #include "PartSet_WidgetMultiSelector.h"
30 #include "PartSet_WidgetFeaturePointSelector.h"
31 #include "PartSet_WidgetEditor.h"
32 #include "PartSet_WidgetFileSelector.h"
33 #include "PartSet_WidgetSketchCreator.h"
34 #include "PartSet_SketcherMgr.h"
35 #include "PartSet_SketcherReentrantMgr.h"
36 #include "PartSet_ResultSketchPrs.h"
37 #include "PartSet_MenuMgr.h"
38 #include "PartSet_CustomPrs.h"
39 #include "PartSet_IconFactory.h"
40 #include "PartSet_OverconstraintListener.h"
41 #include "PartSet_TreeNodes.h"
42 #include "PartSet_FieldStepPrs.h"
43 #include "PartSet_BSplineWidget.h"
45 #include "PartSet_Filters.h"
46 #include "PartSet_FilterInfinite.h"
52 #include <PartSetPlugin_Remove.h>
53 #include <PartSetPlugin_Part.h>
54 #include <PartSetPlugin_Duplicate.h>
56 #include <SketchPlugin_ConstraintCoincidence.h>
58 #include <ModuleBase_Operation.h>
59 #include <ModuleBase_IViewer.h>
60 #include <ModuleBase_IViewWindow.h>
61 #include <ModuleBase_IPropertyPanel.h>
62 #include <ModuleBase_ISelectionActivate.h>
63 #include <ModuleBase_WidgetChoice.h>
64 #include <ModuleBase_WidgetEditor.h>
65 #include <ModuleBase_WidgetValidated.h>
66 #include <ModuleBase_Tools.h>
67 #include <ModuleBase_OperationFeature.h>
68 #include <ModuleBase_WidgetFactory.h>
69 #include <ModuleBase_OperationDescription.h>
70 #include <ModuleBase_ViewerPrs.h>
71 #include <ModuleBase_ResultPrs.h>
73 #include <ModelAPI_ResultField.h>
74 #include <ModelAPI_Object.h>
75 #include <ModelAPI_Events.h>
76 #include <ModelAPI_Validator.h>
77 #include <ModelAPI_Data.h>
78 #include <ModelAPI_Session.h>
79 #include <ModelAPI_ResultBody.h>
80 #include <ModelAPI_AttributeString.h>
81 #include <ModelAPI_AttributeSelectionList.h>
82 #include <ModelAPI_Tools.h>
83 #include <ModelAPI_ResultConstruction.h>
84 #include <ModelAPI_AttributeIntArray.h>
85 #include <ModelAPI_ResultGroup.h>
87 #include <GeomDataAPI_Point2D.h>
88 #include <GeomDataAPI_Point.h>
89 #include <GeomDataAPI_Dir.h>
91 #include <XGUI_ActiveControlMgr.h>
92 #include <XGUI_ActiveControlSelector.h>
93 #include <XGUI_ActionsMgr.h>
94 #include <XGUI_ContextMenuMgr.h>
95 #include <XGUI_DataModel.h>
96 #include <XGUI_Displayer.h>
97 #include <XGUI_ErrorMgr.h>
98 #include <XGUI_FacesPanelSelector.h>
99 #include <XGUI_ModuleConnector.h>
100 #include <XGUI_ObjectsBrowser.h>
101 #include <XGUI_OperationMgr.h>
102 #include <XGUI_PropertyPanel.h>
103 #include <XGUI_SelectionMgr.h>
104 #include <XGUI_Tools.h>
105 #include <XGUI_Workshop.h>
107 #include <SketchPlugin_ConstraintAngle.h>
108 #include <SketchPlugin_ConstraintLength.h>
109 #include <SketchPlugin_ConstraintDistance.h>
110 #include <SketchPlugin_ConstraintParallel.h>
111 #include <SketchPlugin_ConstraintPerpendicular.h>
112 #include <SketchPlugin_ConstraintRadius.h>
113 #include <SketchPlugin_Feature.h>
114 #include <SketchPlugin_Projection.h>
115 #include <SketchPlugin_Sketch.h>
117 #include <SketcherPrs_SymbolPrs.h>
118 #include <SketcherPrs_PositionMgr.h>
119 #include <SketcherPrs_Coincident.h>
120 #include <SketcherPrs_Tools.h>
122 #include <Events_Loop.h>
123 #include <Config_PropManager.h>
124 #include <Config_Keywords.h>
126 #include <AIS_Dimension.hxx>
127 #include <AIS_InteractiveObject.hxx>
128 #include <StdSelect_TypeOfFace.hxx>
129 #include <TopoDS_Vertex.hxx>
130 #include <TopoDS.hxx>
131 #include <TopoDS_Shape.hxx>
132 #include <BRep_Tool.hxx>
135 #include <QMouseEvent>
138 #include <QApplication>
139 #include <QMessageBox>
140 #include <QMainWindow>
144 #include <GeomAlgoAPI_FaceBuilder.h>
145 #include <GeomDataAPI_Dir.h>
147 #include <SelectMgr_ListIteratorOfListOfFilter.hxx>
149 /*!Create and return new instance of XGUI_Module*/
150 extern "C" PARTSET_EXPORT ModuleBase_IModule* createModule(ModuleBase_IWorkshop* theWshop)
152 return new PartSet_Module(theWshop);
155 //******************************************************
156 PartSet_Module::PartSet_Module(ModuleBase_IWorkshop* theWshop)
157 : ModuleBase_IModule(theWshop),
158 myIsOperationIsLaunched(false),
162 new PartSet_IconFactory(this);
164 mySketchMgr = new PartSet_SketcherMgr(this);
165 mySketchReentrantMgr = new PartSet_SketcherReentrantMgr(theWshop);
167 ModuleBase_IViewer* aViewer = theWshop->viewer();
168 connect(aViewer, SIGNAL(keyRelease(ModuleBase_IViewWindow*, QKeyEvent*)),
169 this, SLOT(onKeyRelease(ModuleBase_IViewWindow*, QKeyEvent*)));
170 connect(aViewer, SIGNAL(viewTransformed(int)),
171 SLOT(onViewTransformed(int)));
172 connect(aViewer, SIGNAL(viewCreated(ModuleBase_IViewWindow*)),
173 SLOT(onViewCreated(ModuleBase_IViewWindow*)));
174 myMenuMgr = new PartSet_MenuMgr(this);
175 myCustomPrs = new PartSet_CustomPrs(theWshop);
177 myOverconstraintListener = new PartSet_OverconstraintListener(theWshop);
179 Events_Loop* aLoop = Events_Loop::loop();
180 aLoop->registerListener(this, Events_Loop::eventByName(EVENT_DOCUMENT_CHANGED));
181 aLoop->registerListener(this, Events_Loop::eventByName(EVENT_OBJECT_TO_REDISPLAY));
183 registerSelectionFilter(SF_GlobalFilter, new PartSet_GlobalFilter(myWorkshop));
184 registerSelectionFilter(SF_FilterInfinite, new PartSet_FilterInfinite(myWorkshop));
185 Handle(PartSet_ResultGroupNameFilter) aCRFilter = new PartSet_ResultGroupNameFilter(myWorkshop);
186 std::set<std::string> aCRGroupNames;
187 aCRGroupNames.insert(ModelAPI_ResultConstruction::group());
188 aCRFilter->setGroupNames(aCRGroupNames);
189 registerSelectionFilter(SF_ResultGroupNameFilter, aCRFilter);
191 setDefaultConstraintShown();
193 //Config_PropManager::registerProp("Visualization", "object_default_color", "Object color",
194 // Config_Prop::Color, "225,225,225");
196 Config_PropManager::registerProp("Visualization", "result_body_color", "Result color",
197 Config_Prop::Color, ModelAPI_ResultBody::DEFAULT_COLOR());
199 Config_PropManager::registerProp("Visualization", "result_group_color", "Group color",
200 Config_Prop::Color, ModelAPI_ResultGroup::DEFAULT_COLOR());
202 Config_PropManager::registerProp("Visualization", "result_construction_color",
203 "Construction color",
205 ModelAPI_ResultConstruction::DEFAULT_COLOR());
207 Config_PropManager::registerProp("Visualization", "result_part_color", "Part color",
208 Config_Prop::Color, ModelAPI_ResultPart::DEFAULT_COLOR());
210 Config_PropManager::registerProp("Visualization", "result_field_color", "Field color",
211 Config_Prop::Color, ModelAPI_ResultField::DEFAULT_COLOR());
213 Config_PropManager::registerProp("Visualization", "operation_parameter_color",
214 "Reference shape wireframe color in operation", Config_Prop::Color,
215 PartSet_CustomPrs::OPERATION_PARAMETER_COLOR());
216 Config_PropManager::registerProp("Visualization", "operation_result_color",
217 "Result shape wireframe color in operation", Config_Prop::Color,
218 PartSet_CustomPrs::OPERATION_RESULT_COLOR());
219 Config_PropManager::registerProp("Visualization", "operation_highlight_color",
220 "Multi selector item color in operation", Config_Prop::Color,
221 PartSet_CustomPrs::OPERATION_HIGHLIGHT_COLOR());
222 Config_PropManager::registerProp("Visualization", "operation_remove_feature_color",
223 "Color of removed feature in operation", Config_Prop::Color,
224 PartSet_CustomPrs::OPERATION_REMOVE_FEATURE_COLOR());
225 Config_PropManager::registerProp("Visualization", "sketch_preview_plane",
226 "Color of sketch plane", Config_Prop::Color,
227 PartSet_CustomPrs::OPERATION_SKETCH_PLANE());
229 Config_PropManager::registerProp("Visualization", "hidden_face_transparency",
230 "Hidden faces transparency",
231 Config_Prop::DblSpin,
233 std::ostringstream aStream;
234 aStream << SketcherPrs_Tools::getDefaultArrowSize();
235 Config_PropManager::registerProp("Visualization", "dimension_arrow_size",
236 "Dimension arrow size", Config_Prop::IntSpin, aStream.str());
238 Config_PropManager::registerProp("Visualization", "dimension_font", "Dimension font",
239 Config_Prop::String, "Times-bold");
243 aStream << SketcherPrs_Tools::getDefaultTextHeight();
244 Config_PropManager::registerProp("Visualization", "dimension_value_size",
245 "Dimension value size", Config_Prop::IntSpin, aStream.str());
247 Config_PropManager::registerProp("Visualization", "sketch_dimension_color",
249 Config_Prop::Color, SKETCH_DIMENSION_COLOR);
251 Config_PropManager::registerProp("Shortcuts", "add_parameter_shortcut",
252 "Add parameter in parameters manager dialog",
253 Config_Prop::Shortcut, "Ctrl+A");
255 Config_PropManager::registerProp("Windows", "use_hide_faces_panel",
256 "Use HideFaces panel in operations", Config_Prop::Boolean, "false");
259 //******************************************************
260 PartSet_Module::~PartSet_Module()
263 delete myOverconstraintListener;
267 //******************************************************
268 void PartSet_Module::createFeatures()
270 ModuleBase_IModule::createFeatures();
271 myRoot = new PartSet_RootNode();
272 myRoot->setWorkshop(workshop());
276 //******************************************************
277 void PartSet_Module::storeSelection()
279 // cash is used only to restore selection, so it should be filled in storeSelection and
280 // after applying immediatelly cleared in restoreSelection
281 myCurrentSelection.clear();
282 sketchMgr()->storeSelection(PartSet_SketcherMgr::ST_SelectType, myCurrentSelection);
285 //******************************************************
286 void PartSet_Module::restoreSelection()
288 // cash is used only to restore selection, so it should be filled in storeSelection and
289 // after applying immediatelly cleared in restoreSelection
290 sketchMgr()->restoreSelection(myCurrentSelection);
291 myCurrentSelection.clear();
294 //******************************************************
295 void PartSet_Module::registerValidators()
297 //Registering of validators
298 SessionPtr aMgr = ModelAPI_Session::get();
299 ModelAPI_ValidatorsFactory* aFactory = aMgr->validators();
300 aFactory->registerValidator("PartSet_DistanceSelection", new PartSet_DistanceSelection);
301 aFactory->registerValidator("PartSet_LengthSelection", new PartSet_LengthSelection);
302 aFactory->registerValidator("PartSet_PerpendicularSelection", new PartSet_PerpendicularSelection);
303 aFactory->registerValidator("PartSet_ParallelSelection", new PartSet_ParallelSelection);
304 aFactory->registerValidator("PartSet_RadiusSelection", new PartSet_RadiusSelection);
305 aFactory->registerValidator("PartSet_RigidSelection", new PartSet_RigidSelection);
306 aFactory->registerValidator("PartSet_CoincidentSelection", new PartSet_CoincidentSelection);
307 aFactory->registerValidator("PartSet_HVDirSelection", new PartSet_HVDirSelection);
308 aFactory->registerValidator("PartSet_TangentSelection", new PartSet_TangentSelection);
309 aFactory->registerValidator("PartSet_FilletSelection", new PartSet_FilletSelection);
310 aFactory->registerValidator("PartSet_AngleSelection", new PartSet_AngleSelection);
311 aFactory->registerValidator("PartSet_EqualSelection", new PartSet_EqualSelection);
312 aFactory->registerValidator("PartSet_CollinearSelection", new PartSet_CollinearSelection);
313 aFactory->registerValidator("PartSet_MiddlePointSelection", new PartSet_MiddlePointSelection);
314 aFactory->registerValidator("PartSet_DifferentObjects", new PartSet_DifferentObjectsValidator);
315 aFactory->registerValidator("PartSet_DifferentPoints", new PartSet_DifferentPointsValidator);
316 aFactory->registerValidator("PartSet_CoincidentAttr", new PartSet_CoincidentAttr);
317 aFactory->registerValidator("PartSet_MultyTranslationSelection",
318 new PartSet_MultyTranslationSelection);
319 aFactory->registerValidator("PartSet_SplitSelection", new PartSet_SplitSelection);
320 aFactory->registerValidator("PartSet_ProjectionSelection", new PartSet_ProjectionSelection);
321 aFactory->registerValidator("PartSet_IntersectionSelection", new PartSet_IntersectionSelection);
324 //******************************************************
325 void PartSet_Module::connectToPropertyPanel(ModuleBase_ModelWidget* theWidget,
326 const bool isToConnect)
328 mySketchMgr->connectToPropertyPanel(theWidget, isToConnect);
331 //******************************************************
332 void PartSet_Module::operationCommitted(ModuleBase_Operation* theOperation)
334 if (sketchMgr()->isNestedSketchOperation(theOperation)) {
335 mySketchMgr->commitNestedSketch(theOperation);
337 /// deactivate of overconstraint listener should be performed after Sketch commit (#2176)
338 if (PartSet_SketcherMgr::isSketchOperation(theOperation))
339 overconstraintListener()->setActive(false);
341 /// Restart sketcher operations automatically
342 if (!mySketchReentrantMgr->operationCommitted(theOperation)) {
343 getWorkshop()->selector()->clearSelection();
347 //******************************************************
348 void PartSet_Module::operationAborted(ModuleBase_Operation* theOperation)
350 /// Restart sketcher operations automatically
351 mySketchReentrantMgr->operationAborted(theOperation);
352 /// deactivate of overconstraint listener should be performed after Sketch abort (#2176)
353 if (PartSet_SketcherMgr::isSketchOperation(theOperation))
354 overconstraintListener()->setActive(false);
356 getWorkshop()->selector()->clearSelection();
359 //******************************************************
360 void PartSet_Module::operationStarted(ModuleBase_Operation* theOperation)
362 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>
365 XGUI_Workshop* aWorkshop = XGUI_Tools::workshop(workshop());
366 XGUI_PropertyPanel* aPropertyPanel = aWorkshop->propertyPanel();
368 ModuleBase_ModelWidget* aFilledWidget = 0;
369 bool aPostonedWidgetActivation = false;
371 FeaturePtr aFeature = aFOperation->feature();
372 /// Restart sketcher operations automatically
373 /// it is important to call method of sketch reentrant manager before filling of PP
374 /// because it fills some created feature attributes, these new values should be used
375 /// to fill the property panel
376 mySketchReentrantMgr->operationStarted(theOperation);
378 aWorkshop->fillPropertyPanel(aFOperation);
379 // filling the operation values by the current selection
380 // if the operation can be committed after the controls filling, the method perform should
381 // be stopped. Otherwise unnecessary presentations can be shown(e.g. operation prs in sketch)
382 bool isOperationCommitted = false;
383 if (!aFOperation->isEditOperation()) {
384 std::string aGreedAttributeId = ModuleBase_Tools::findGreedAttribute(workshop(), aFeature);
385 // if there is a greed attribute, automatic commit by preselection
386 // for this feature is prohibited
387 aFilledWidget = aFOperation->activateByPreselection(aGreedAttributeId);
388 if (currentOperation() != aFOperation)
389 isOperationCommitted = true;
391 if (aGreedAttributeId.empty()) {
392 // a signal should be emitted before the next widget activation
393 // because, the activation of the next widget will give a focus to the widget.
394 // As a result the value of the widget is initialized.
395 // And commit may happens until the value is entered.
397 if (mySketchReentrantMgr->canBeCommittedByPreselection())
398 isOperationCommitted = mySketchMgr->operationActivatedByPreselection();
399 // activate the next obligatory widget
400 if (!isOperationCommitted)
401 aPropertyPanel->activateNextWidget(aFilledWidget);
404 else { // there is a greed widget
405 const QList<ModuleBase_ModelWidget*>& aWidgets = aPropertyPanel->modelWidgets();
406 std::string aFirstAttributeId = aWidgets.front()->attributeID();
407 // activate next widget after greeded if it is the first widget in the panel
408 // else the first panel widget is already activated by operation start
409 if (aFirstAttributeId == aGreedAttributeId)
410 aPostonedWidgetActivation = true;
413 } if (!isOperationCommitted) {
414 aWorkshop->connectToPropertyPanel(true);
415 updateSketcherOnStart(aFOperation);
416 updatePresentationsOnStart(aFOperation);
418 // the objects of the current operation should be deactivated
419 QObjectPtrList anObjects;
420 anObjects.append(aFeature);
421 std::list<ResultPtr> aResults;
422 ModelAPI_Tools::allResults(aFeature, aResults);
423 std::list<ResultPtr>::const_iterator aIt;
424 for (aIt = aResults.begin(); aIt != aResults.end(); ++aIt) {
425 anObjects.append(*aIt);
427 QObjectPtrList::const_iterator anIt = anObjects.begin(), aLast = anObjects.end();
428 for (; anIt != aLast; anIt++)
429 aWorkshop->deactivateActiveObject(*anIt, false);
430 if (anObjects.size() > 0) {
431 XGUI_Displayer* aDisplayer = aWorkshop->displayer();
432 aDisplayer->updateViewer();
434 /// state of command actions should be updated after displayed objects modification because
435 /// deactivation(for example) of objects may influence on selection in the viewer
436 /// State of command actions may depend on selection in the viewer(e.g. Sketch)
437 workshop()->updateCommandStatus();
439 if (aPostonedWidgetActivation) {
440 // if the widget is an empty in the chain of activated widgets, the current operation
441 // is restarted. It should be performed after functionality of the operation starting
442 aPropertyPanel->activateNextWidget(aFilledWidget);
447 //******************************************************
448 void PartSet_Module::updateSketcherOnStart(ModuleBase_Operation* theOperation)
450 if (PartSet_SketcherMgr::isSketchOperation(theOperation)) {
451 mySketchMgr->startSketch(theOperation);
453 // It is switched off because of
454 // Task #3067: 5.2.2 Drawing in the sketcher: change the mouse cursor arrow
455 else if (sketchMgr()->isNestedSketchOperation(theOperation)) {
456 mySketchMgr->startNestedSketch(theOperation);
460 //******************************************************
461 void PartSet_Module::updatePresentationsOnStart(ModuleBase_Operation* theOperation)
463 ModuleBase_OperationFeature* aFOperation =
464 dynamic_cast<ModuleBase_OperationFeature*>(theOperation);
466 myCustomPrs->activate(aFOperation->feature(), ModuleBase_IModule::CustomizeArguments, false);
467 myCustomPrs->activate(aFOperation->feature(), ModuleBase_IModule::CustomizeResults, false);
471 //******************************************************
472 void PartSet_Module::operationResumed(ModuleBase_Operation* theOperation)
474 ModuleBase_IModule::operationResumed(theOperation);
476 ModuleBase_OperationFeature* aFOperation =
477 dynamic_cast<ModuleBase_OperationFeature*>(theOperation);
479 myCustomPrs->activate(aFOperation->feature(), ModuleBase_IModule::CustomizeArguments, false);
480 myCustomPrs->activate(aFOperation->feature(), ModuleBase_IModule::CustomizeResults, false);
484 //******************************************************
485 void PartSet_Module::operationStopped(ModuleBase_Operation* theOperation)
487 bool isModifiedArgs = myCustomPrs->deactivate(ModuleBase_IModule::CustomizeArguments, false);
488 bool isModifiedResults = myCustomPrs->deactivate(ModuleBase_IModule::CustomizeResults, false);
489 bool isModified = isModifiedArgs || isModifiedResults;
491 if (sketchMgr()->isNestedSketchOperation(theOperation)) {
492 mySketchMgr->stopNestedSketch(theOperation);
494 else if (PartSet_SketcherMgr::isSketchOperation(theOperation))
495 setDefaultConstraintShown();
497 //VSV: Viewer is updated on feature update and redisplay
499 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(myWorkshop);
500 XGUI_Displayer* aDisplayer = aConnector->workshop()->displayer();
501 aDisplayer->updateViewer();
504 QMap<PartSet_Tools::ConstraintVisibleState, bool>::const_iterator
505 anIt = myHasConstraintShown.begin(), aLast = myHasConstraintShown.end();
506 for (; anIt != aLast; anIt++) {
507 mySketchMgr->updateBySketchParameters(anIt.key(), anIt.value());
511 //******************************************************
512 ModuleBase_Operation* PartSet_Module::currentOperation() const
514 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
515 XGUI_OperationMgr* anOpMgr = aConnector->workshop()->operationMgr();
516 return anOpMgr->currentOperation();
519 //******************************************************
520 bool PartSet_Module::canUndo() const
522 bool aCanUndo = false;
523 SessionPtr aMgr = ModelAPI_Session::get();
524 if (aMgr->hasModuleDocument() && aMgr->canUndo()) {
525 aCanUndo = !aMgr->isOperation();
526 if (!aCanUndo) // check the enable state additionally by sketch manager
527 aCanUndo = aMgr->canUndo();
532 //******************************************************
533 bool PartSet_Module::canRedo() const
535 bool aCanRedo = false;
536 SessionPtr aMgr = ModelAPI_Session::get();
537 if (aMgr->hasModuleDocument() && aMgr->canRedo()) {
538 aCanRedo = !aMgr->isOperation();
539 if (!aCanRedo) // check the enable state additionally by sketch manager
540 aCanRedo = aMgr->canRedo();
545 //******************************************************
546 bool PartSet_Module::canApplyAction(const ObjectPtr& theObject, const QString& theActionId) const
549 if (theActionId == "MOVE_CMD" || theActionId == "MOVE_SPLIT_CMD") {
550 FeaturePtr aFeature = ModelAPI_Feature::feature(theObject);
552 ResultPtr aResult = ModuleBase_Tools::firstResult(aFeature);
553 // part features can not be moved in the history.
554 if (aResult.get() && aResult->groupName() == ModelAPI_ResultPart::group())
561 //******************************************************
562 bool PartSet_Module::canEraseObject(const ObjectPtr& theObject) const
564 // the sketch manager put the restriction to the objects erase
565 return mySketchMgr->canEraseObject(theObject);
568 //******************************************************
569 bool PartSet_Module::canDisplayObject(const ObjectPtr& theObject) const
571 // the sketch manager put the restriction to the objects display
572 return mySketchMgr->canDisplayObject(theObject);
575 //******************************************************
576 bool PartSet_Module::canUsePreselection(const QString& thePreviousOperationKind,
577 const QString& theStartedOperationKind)
579 if (ModuleBase_IModule::canUsePreselection(thePreviousOperationKind, theStartedOperationKind))
582 return mySketchMgr->isNestedSketchFeature(theStartedOperationKind);
585 /*void PartSet_Module::processHiddenObject(const std::list<ObjectPtr>& theObjects)
587 mySketchMgr->processHiddenObject(theObjects);
590 //******************************************************
591 bool PartSet_Module::canActivateSelection(const ObjectPtr& theObject) const
593 bool aCanActivate = ModuleBase_IModule::canActivateSelection(theObject);
595 ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
596 bool isSketchOp = PartSet_SketcherMgr::isSketchOperation(anOperation),
597 isNestedOp = sketchMgr()->isNestedSketchOperation(anOperation);
598 if (isSketchOp || isNestedOp) {
599 // in active sketch operation it is possible to activate operation object in selection
600 // in the edit operation, e.g. points of the line can be moved when the line is edited
601 ModuleBase_OperationFeature* aFOperation =
602 dynamic_cast<ModuleBase_OperationFeature*>(anOperation);
603 aCanActivate = aCanActivate || (aFOperation && aFOperation->isEditOperation());
608 //******************************************************
609 bool PartSet_Module::addViewerMenu(const QMap<QString, QAction*>& theStdActions,
611 QMap<int, QAction*>& theMenuActions) const
613 return myMenuMgr->addViewerMenu(theStdActions, theParent, theMenuActions);
616 //******************************************************
617 void PartSet_Module::updateViewerMenu(const QMap<QString, QAction*>& theStdActions)
619 myMenuMgr->updateViewerMenu(theStdActions);
622 //******************************************************
623 bool PartSet_Module::isActionEnableStateFixed(const int theActionId) const
625 bool isEnabledFixed = false;
626 if (theActionId == XGUI_ActionsMgr::AcceptAll &&
627 mySketchReentrantMgr->isInternalEditActive())
628 isEnabledFixed = true;
629 return isEnabledFixed;
632 //******************************************************
633 QString PartSet_Module::getFeatureError(const FeaturePtr& theFeature)
635 QString anError = ModuleBase_IModule::getFeatureError(theFeature);
636 if (anError.isEmpty())
637 anError = sketchMgr()->getFeatureError(theFeature);
642 //******************************************************
643 void PartSet_Module::grantedOperationIds(ModuleBase_Operation* theOperation,
644 QStringList& theIds) const
646 myMenuMgr->grantedOperationIds(theOperation, theIds);
648 if (PartSet_SketcherMgr::isSketchOperation(theOperation)) {
649 XGUI_Workshop* aWorkshop = getWorkshop();
650 theIds.append(aWorkshop->contextMenuMgr()->action("DELETE_CMD")->text());
654 //******************************************************
655 void PartSet_Module::activeSelectionModes(QIntList& theModes)
657 if (mySketchMgr->activeSketch().get())
658 PartSet_SketcherMgr::sketchSelectionModes(mySketchMgr->activeSketch(), theModes);
660 theModes = XGUI_Tools::workshop(myWorkshop)->viewerSelectionModes();
663 //******************************************************
664 void PartSet_Module::moduleSelectionModes(int theModesType, QIntList& theModes)
666 customSubShapesSelectionModes(theModes);
667 //theModes.append(XGUI_Tools::workshop(myWorkshop)->viewerSelectionModes());
668 //myWorkshop->module()->activeSelectionModes(theModes);
671 //******************************************************
672 void PartSet_Module::moduleSelectionFilters(const QIntList& theFilterTypes,
673 SelectMgr_ListOfFilter& theSelectionFilters)
675 bool isSketchActive = mySketchMgr->activeSketch().get();
677 std::map<ModuleBase_SelectionFilterType, Handle(SelectMgr_Filter)>::const_iterator aFiltersIt =
678 mySelectionFilters.begin();
679 for (; aFiltersIt != mySelectionFilters.end(); aFiltersIt++) {
680 int aFilterType = aFiltersIt->first;
681 // do not add not participating filters in given parameters
682 if (!theFilterTypes.contains(aFilterType))
685 // using sketch filters only if sketch operation is active
686 if (!isSketchActive &&
687 mySketchMgr->sketchSelectionFilter((ModuleBase_SelectionFilterType)aFilterType))
690 // using filtering of construction results only from faces panel
691 if (aFilterType == SF_ResultGroupNameFilter)
694 theSelectionFilters.Append(aFiltersIt->second);
698 //******************************************************
699 void PartSet_Module::customSubShapesSelectionModes(QIntList& theModes)
701 if (theModes.contains(TopAbs_FACE))
702 theModes.append(SketcherPrs_Tools::Sel_Sketch_Face);
703 if (theModes.contains(TopAbs_WIRE))
704 theModes.append(SketcherPrs_Tools::Sel_Sketch_Wire);
706 if (mySketchMgr->activeSketch().get())
707 PartSet_SketcherMgr::sketchSelectionModes(mySketchMgr->activeSketch(), theModes);
710 //******************************************************
711 void PartSet_Module::getGeomSelection(const std::shared_ptr<ModuleBase_ViewerPrs>& theSelected,
712 ObjectPtr& theObject, AttributePtr& theAttribute)
714 ObjectPtr anObject = theSelected->object();
715 GeomShapePtr aShape = theSelected->shape();
717 theAttribute = findAttribute(anObject, aShape);
718 // TODO: try to create result if object is an external object
719 theObject = anObject;
722 //******************************************************
723 bool PartSet_Module::isMouseOverWindow()
725 return mySketchMgr->isMouseOverWindow();
728 //******************************************************
729 bool PartSet_Module::isSketchNeutralPointActivated() const
731 bool isNeutralPoint = true;
732 if (sketchReentranceMgr()->isInternalEditActive())
733 isNeutralPoint = false;
734 if (myIsOperationIsLaunched)
735 isNeutralPoint = false;
737 return isNeutralPoint;
740 //******************************************************
741 void PartSet_Module::closeDocument()
743 myActivePartIndex = QModelIndex();
744 SketcherPrs_PositionMgr::get()->clearAll();
747 //******************************************************
748 void PartSet_Module::clearViewer()
750 myCustomPrs->clearPrs();
752 XGUI_Workshop* aWorkshop = getWorkshop();
753 XGUI_Displayer* aDisplayer = aWorkshop->displayer();
754 aDisplayer->deactivateSelectionFilters(false);
757 //******************************************************
758 void PartSet_Module::propertyPanelDefined(ModuleBase_Operation* theOperation)
760 ModuleBase_OperationFeature* aFOperation =
761 dynamic_cast<ModuleBase_OperationFeature*>(theOperation);
765 ModuleBase_IPropertyPanel* aPanel = aFOperation->propertyPanel();
766 // we have to manually activate the sketch label in edit mode
767 if (PartSet_SketcherMgr::isSketchOperation(aFOperation) && (aFOperation->isEditOperation()))
768 aPanel->activateWidget(aPanel->modelWidgets().first());
771 //******************************************************
772 bool PartSet_Module::createWidgets(const FeaturePtr& theFeature, const QString& theXmlRepr,
773 QList<ModuleBase_ModelWidget*>& theWidgets) const
775 bool aProcessed = false;
777 XGUI_Workshop* aWorkshop = getWorkshop();
778 XGUI_PropertyPanel* aPropertyPanel = aWorkshop->propertyPanel();
779 if (mySketchMgr->activeSketch().get() && aPropertyPanel) {
780 ModuleBase_ISelection* aSelection = workshop()->selection();
781 // click on a point in sketch leads here with the point is highlighted, not yet selected
782 QList<ModuleBase_ViewerPrsPtr> aPreselection = aSelection->getHighlighted();
783 if (aPreselection.size() == 1) {
784 ModuleBase_ViewerPrsPtr aSelectedPrs = aPreselection[0];
785 ObjectPtr anObject = aSelectedPrs->object();
787 FeaturePtr aFeature = ModelAPI_Feature::feature(anObject);
788 GeomShapePtr aShape = aSelectedPrs->shape();
789 // click on the digit of dimension constrain comes here
790 // with an empty shape, so we need the check
791 if (aFeature == theFeature && aShape.get() && !aShape->isNull()) {
792 // if feature has only one result and shape of result is equal to selected shape
793 // this attribute is not processed. It is a case of Sketch Point.
794 if (aFeature->results().size() == 1) {
795 ResultPtr aResult = aFeature->results().front();
796 if (aResult.get() && aResult->shape()->isEqual(aShape))
799 const TopoDS_Shape& aTDShape = aShape->impl<TopoDS_Shape>();
800 std::pair<AttributePtr, int> anAttribute =
801 PartSet_Tools::findAttributeBy2dPoint(anObject, aTDShape, mySketchMgr->activeSketch());
802 if (anAttribute.first.get()) {
803 ModuleBase_WidgetFactory aFactory(theXmlRepr.toStdString(), workshop());
805 const std::string anAttributeId = anAttribute.first->id();
806 aFactory.createWidget(aPropertyPanel->contentWidget(), anAttributeId);
808 theWidgets = aFactory.getModelWidgets();
809 // it is possible that the point does not present in XML definition,
810 // in this case, we assume that it is not processed by this module
811 // e.g. "Intersection point" feature
812 aProcessed = !theWidgets.isEmpty();
820 //******************************************************
821 void PartSet_Module::onSelectionChanged()
823 ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
827 bool isSketcherOp = false;
828 // An edit operation is enable only if the current opeation is the sketch operation
829 if (mySketchMgr->activeSketch()) {
830 if (PartSet_Tools::sketchPlane(mySketchMgr->activeSketch()))
831 isSketcherOp = PartSet_SketcherMgr::isSketchOperation(aOperation);
834 // Editing of constraints can be done on selection
835 ModuleBase_ISelection* aSelect = myWorkshop->selection();
836 QList<ModuleBase_ViewerPrsPtr> aSelected = aSelect->getSelected();
837 if (aSelected.size() == 1) {
838 ModuleBase_ViewerPrsPtr aPrs = aSelected.first();
839 ObjectPtr aObject = aPrs->object();
840 FeaturePtr aFeature = ModelAPI_Feature::feature(aObject);
842 std::string aId = aFeature->getKind();
843 if ((aId == SketchPlugin_ConstraintRadius::ID()) ||
844 (aId == SketchPlugin_ConstraintLength::ID()) ||
845 (aId == SketchPlugin_ConstraintDistance::ID()) ||
846 (aId == SketchPlugin_ConstraintAngle::ID())) {
847 editFeature(aFeature);
854 //******************************************************
855 void PartSet_Module::onKeyRelease(ModuleBase_IViewWindow* theWnd, QKeyEvent* theEvent)
857 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
858 XGUI_OperationMgr* anOpMgr = aConnector->workshop()->operationMgr();
859 anOpMgr->onKeyReleased(theWnd->viewPort(), theEvent);
862 //******************************************************
863 ModuleBase_ModelWidget* PartSet_Module::createWidgetByType(const std::string& theType,
865 Config_WidgetAPI* theWidgetApi)
867 ModuleBase_IWorkshop* aWorkshop = workshop();
868 ModuleBase_ModelWidget* aWgt = NULL;
869 if (theType == "sketch-start-label") {
870 PartSet_WidgetSketchLabel* aLabelWgt = new PartSet_WidgetSketchLabel(theParent, aWorkshop,
871 theWidgetApi, myHasConstraintShown);
872 connect(aLabelWgt, SIGNAL(planeSelected(const std::shared_ptr<GeomAPI_Pln>&)),
873 mySketchMgr, SLOT(onPlaneSelected(const std::shared_ptr<GeomAPI_Pln>&)));
874 connect(aLabelWgt, SIGNAL(showConstraintToggled(int, bool)),
875 mySketchMgr, SLOT(onShowConstraintsToggle(int, bool)));
876 connect(aLabelWgt, SIGNAL(showFreePoints(bool)), mySketchMgr, SLOT(onShowPoints(bool)));
877 connect(aLabelWgt, SIGNAL(autoConstraints(bool)),
878 sketchReentranceMgr(), SLOT(onAutoConstraints(bool)));
879 aLabelWgt->setShowPointsState(mySketchMgr->isShowFreePointsShown());
881 } else if (theType == "sketch-2dpoint_selector") {
882 PartSet_WidgetPoint2D* aPointWgt = new PartSet_WidgetPoint2D(theParent, aWorkshop,
884 aPointWgt->setSketch(mySketchMgr->activeSketch());
885 connect(aPointWgt, SIGNAL(vertexSelected()), sketchReentranceMgr(), SLOT(onVertexSelected()));
887 }else if (theType == "sketch-2dpoint_flyout_selector") {
888 PartSet_WidgetPoint2DFlyout* aPointWgt = new PartSet_WidgetPoint2DFlyout(theParent, aWorkshop,
890 aPointWgt->setSketch(mySketchMgr->activeSketch());
891 connect(aPointWgt, SIGNAL(vertexSelected()), sketchReentranceMgr(), SLOT(onVertexSelected()));
893 } else if (theType == "sketch_shape_selector") {
894 PartSet_WidgetShapeSelector* aShapeSelectorWgt =
895 new PartSet_WidgetShapeSelector(theParent, aWorkshop, theWidgetApi);
896 aShapeSelectorWgt->setSketcher(mySketchMgr->activeSketch());
897 aWgt = aShapeSelectorWgt;
898 } else if (theType == "sketch_multi_selector") {
899 PartSet_WidgetMultiSelector* aShapeSelectorWgt =
900 new PartSet_WidgetMultiSelector(theParent, aWorkshop, theWidgetApi);
901 aShapeSelectorWgt->setSketcher(mySketchMgr->activeSketch());
902 aWgt = aShapeSelectorWgt;
904 else if (theType == "sketch_feature_point_selector") {
905 PartSet_WidgetFeaturePointSelector* aPointSelectorWgt =
906 new PartSet_WidgetFeaturePointSelector(theParent, aWorkshop, theWidgetApi);
907 aPointSelectorWgt->setSketcher(mySketchMgr->activeSketch());
908 aWgt = aPointSelectorWgt;
910 else if (theType == "sketch-bspline_selector") {
911 PartSet_WidgetBSplinePoints* aBSplineWgt =
912 new PartSet_WidgetBSplinePoints(theParent, aWorkshop, theWidgetApi);
913 aBSplineWgt->setSketch(mySketchMgr->activeSketch());
916 else if (theType == WDG_DOUBLEVALUE_EDITOR) {
917 aWgt = new PartSet_WidgetEditor(theParent, aWorkshop, theWidgetApi);
918 } else if (theType == "export_file_selector") {
919 aWgt = new PartSet_WidgetFileSelector(theParent, aWorkshop, theWidgetApi);
920 } else if (theType == "sketch_launcher") {
921 aWgt = new PartSet_WidgetSketchCreator(theParent, this, theWidgetApi);
923 else if (theType == "module_choice") {
924 aWgt = new ModuleBase_WidgetChoice(theParent, theWidgetApi);
925 connect(aWgt, SIGNAL(itemSelected(ModuleBase_ModelWidget*, int)),
926 this, SLOT(onChoiceChanged(ModuleBase_ModelWidget*, int)));
927 } else if (theType == "bspline-panel") {
928 PartSet_BSplineWidget* aPanel = new PartSet_BSplineWidget(theParent, theWidgetApi);
929 //aPanel->setFeature(theFeature);
935 //******************************************************
936 ModuleBase_ModelWidget* PartSet_Module::activeWidget() const
938 ModuleBase_ModelWidget* anActiveWidget = 0;
940 ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
942 return anActiveWidget;
944 ModuleBase_IPropertyPanel* aPanel = aOperation->propertyPanel();
946 return anActiveWidget;
948 return aPanel->activeWidget(true);
951 //******************************************************
952 bool PartSet_Module::deleteObjects()
954 bool isProcessed = false;
956 XGUI_Workshop* aWorkshop = getWorkshop();
957 XGUI_OperationMgr* anOpMgr = aWorkshop->operationMgr();
959 //SessionPtr aMgr = ModelAPI_Session::get();
960 // 1. check whether the delete should be processed in the module
961 ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
962 bool isSketchOp = PartSet_SketcherMgr::isSketchOperation(anOperation),
963 isNestedOp = sketchMgr()->isNestedSketchOperation(anOperation);
964 if (isSketchOp || isNestedOp) {
966 // 2. find selected presentations
967 // selected objects should be collected before the current operation abort because
968 // the abort leads to selection lost on constraint objects. It can be corrected after #386 issue
969 ModuleBase_ISelection* aSel = workshop()->selection();
970 QObjectPtrList aSelectedObj = aSel->selectedPresentations();
971 // if there are no selected objects in the viewer, that means that the selection in another
972 // place cased this method. It is necessary to return the false value to understande in above
973 // method that delete is not processed
974 if (aSelectedObj.count() == 0)
977 // avoid delete of the objects, which are not belong to the current sketch
978 // in order to do not delete results of other sketches
979 QObjectPtrList aSketchObjects;
980 QObjectPtrList::const_iterator anIt = aSelectedObj.begin(), aLast = aSelectedObj.end();
981 for ( ; anIt != aLast; anIt++) {
982 ObjectPtr anObject = *anIt;
983 if (mySketchMgr->isObjectOfSketch(anObject)) {
984 // sketch feature should be used in this list because workshop deletes features only
985 // results are skipped
986 FeaturePtr aSketchFeature = ModelAPI_Feature::feature(anObject);
987 aSketchObjects.append(aSketchFeature);
990 // if the selection contains only local selected presentations from other sketches,
991 // the Delete operation should not be done at all
992 if (aSketchObjects.size() == 0)
995 // 3. start operation
996 QString aDescription = aWorkshop->contextMenuMgr()->action("DELETE_CMD")->text();
997 ModuleBase_Operation* anOpAction = new ModuleBase_Operation(aDescription, this);
999 // the active nested sketch operation should be aborted unconditionally
1000 // the Delete action should be additionally granted for the Sketch operation
1001 // in order to do not abort/commit it
1003 if (!anOpMgr->canStartOperation(anOpAction->id(), isCommitted))
1004 return true; // the objects are processed but can not be deleted
1006 anOpMgr->startOperation(anOpAction);
1008 // WORKAROUND, should be done to avoid viewer highlight update after deletetion of objects
1009 // the problem is in AIS Dimensions recompute
1010 // if a line and the dim are removed, line is the first
1011 // it causes the AIS recompute, where the base line is null,
1012 // the result is empty AIS in the viewer
1013 XGUI_Tools::workshop(myWorkshop)->selector()->clearSelection();
1015 // 4. delete features
1016 // sketch feature should be skipped, only sub-features can be removed
1017 // when sketch operation is active
1018 aWorkshop->deleteFeatures(aSketchObjects);
1019 // 5. stop operation
1020 anOpMgr->commitOperation();
1025 //******************************************************
1026 void PartSet_Module::editFeature(FeaturePtr theFeature)
1028 storeConstraintsState(theFeature->getKind());
1029 ModuleBase_IModule::editFeature(theFeature);
1032 //******************************************************
1033 bool PartSet_Module::canCommitOperation() const
1038 //******************************************************
1039 void PartSet_Module::launchOperation(const QString& theCmdId, const bool& isStartAfterCommitOnly)
1041 myIsOperationIsLaunched = true;
1042 storeConstraintsState(theCmdId.toStdString());
1043 updateConstraintsState(theCmdId.toStdString());
1045 ModuleBase_IModule::launchOperation(theCmdId, isStartAfterCommitOnly);
1047 myIsOperationIsLaunched = false;
1050 //******************************************************
1051 void PartSet_Module::storeConstraintsState(const std::string& theFeatureKind)
1053 if (myWorkshop->currentOperation() &&
1054 myWorkshop->currentOperation()->id().toStdString() == SketchPlugin_Sketch::ID()) {
1055 const QMap<PartSet_Tools::ConstraintVisibleState, bool>& aShownStates =
1056 mySketchMgr->showConstraintStates();
1057 myHasConstraintShown = aShownStates;
1061 //******************************************************
1062 void PartSet_Module::updateConstraintsState(const std::string& theFeatureKind)
1064 if (PartSet_SketcherMgr::constraintsIdList().contains(theFeatureKind.c_str()) ||
1065 PartSet_SketcherMgr::replicationsIdList().contains(theFeatureKind.c_str())) {
1066 // Show constraints if a constraint was anOperation
1067 mySketchMgr->updateBySketchParameters(PartSet_Tools::Geometrical, true);
1068 mySketchMgr->updateBySketchParameters(PartSet_Tools::Dimensional, true);
1069 mySketchMgr->updateBySketchParameters(PartSet_Tools::Expressions,
1070 myHasConstraintShown[PartSet_Tools::Expressions]);
1074 //******************************************************
1075 void PartSet_Module::onObjectDisplayed(ObjectPtr theObject, AISObjectPtr theAIS)
1077 Handle(AIS_InteractiveObject) anAIS = theAIS->impl<Handle(AIS_InteractiveObject)>();
1078 if (!anAIS.IsNull()) {
1079 FeaturePtr aFeature = ModelAPI_Feature::feature(theObject);
1080 if (aFeature.get()) {
1081 bool aToUseZLayer = false;
1082 if (PartSet_Tools::findRefsToMeFeature(aFeature,SketchPlugin_Projection::ID()))
1083 aToUseZLayer = true;
1085 CompositeFeaturePtr aParent = ModelAPI_Tools::compositeOwner(aFeature);
1086 aToUseZLayer = (aParent.get() && (aParent->getKind() == SketchPlugin_Sketch::ID()));
1089 Handle(AIS_InteractiveContext) aCtx = anAIS->GetContext();
1090 if (aFeature->getKind() == SketchPlugin_ConstraintCoincidence::ID())
1091 aCtx->SetZLayer(anAIS, Graphic3d_ZLayerId_Top);
1093 aCtx->SetZLayer(anAIS, myVisualLayerId);
1099 //******************************************************
1100 void PartSet_Module::onBeforeObjectErase(ObjectPtr theObject, AISObjectPtr theAIS)
1103 // it should be recomputed in order to disappear in the viewer if the corresponded object
1105 //if (myCustomPrs->isActive())
1106 // myCustomPrs->redisplay(theObject, false);
1109 //******************************************************
1110 void PartSet_Module::onViewTransformed(int theTrsfType)
1112 // Set length of arrows constant in pixel size
1113 // if the operation is panning or rotate or panglobal then do nothing
1114 if ((theTrsfType == 1) || (theTrsfType == 3) || (theTrsfType == 4))
1116 ModuleBase_IViewer* aViewer = myWorkshop->viewer();
1117 Handle(AIS_InteractiveContext) aContext = aViewer->AISContext();
1118 if (aContext.IsNull())
1121 //Handle(V3d_View) aView = aViewer->activeView();
1123 XGUI_Workshop* aWorkshop = getWorkshop();
1124 XGUI_Displayer* aDisplayer = aWorkshop->displayer();
1125 Handle(V3d_Viewer) aV3dViewer = aContext->CurrentViewer();
1126 Handle(V3d_View) aView;
1128 for (aV3dViewer->InitDefinedViews();
1129 aV3dViewer->MoreDefinedViews();
1130 aV3dViewer->NextDefinedViews()) {
1131 Handle(V3d_View) aV = aV3dViewer->DefinedView();
1132 double aS = aV->Scale();
1141 bool isModified = false;
1142 ModuleBase_Operation* aCurrentOperation = myWorkshop->currentOperation();
1143 if (aCurrentOperation &&
1144 (PartSet_SketcherMgr::isSketchOperation(aCurrentOperation) ||
1145 sketchMgr()->isNestedSketchOperation(aCurrentOperation) ||
1146 (aCurrentOperation->id() == "Measurement")))
1148 double aLen = aView->Convert(SketcherPrs_Tools::getConfigArrowSize());
1149 SketcherPrs_Tools::setArrowSize(aLen);
1150 const double aCurScale = aViewer->activeView()->Camera()->Scale();
1151 aViewer->SetScale(aViewer->activeView(), aCurScale);
1153 QList<Handle(AIS_InteractiveObject)> aPrsList = aDisplayer->displayedPresentations();
1154 foreach(Handle(AIS_InteractiveObject) aAisObj, aPrsList) {
1156 QList<AISObjectPtr> aPrsList = aDisplayer->displayedPresentations();
1157 foreach(AISObjectPtr aAIS, aPrsList) {
1158 Handle(AIS_InteractiveObject) aAisObj = aAIS->impl<Handle(AIS_InteractiveObject)>();
1160 Handle(AIS_Dimension) aDim = Handle(AIS_Dimension)::DownCast(aAisObj);
1161 if (!aDim.IsNull()) {
1162 aDim->DimensionAspect()->ArrowAspect()->SetLength(aLen);
1163 aContext->Redisplay(aDim, false);
1168 aDisplayer->updateViewer();
1173 //******************************************************
1174 bool PartSet_Module::isCustomPrsActivated(const ModuleBase_CustomizeFlag& theFlag) const
1176 return myCustomPrs->isActive(theFlag);
1179 //******************************************************
1180 void PartSet_Module::activateCustomPrs(const FeaturePtr& theFeature,
1181 const ModuleBase_CustomizeFlag& theFlag,
1182 const bool theUpdateViewer)
1184 myCustomPrs->activate(theFeature, theFlag, theUpdateViewer);
1187 //******************************************************
1188 void PartSet_Module::deactivateCustomPrs(const ModuleBase_CustomizeFlag& theFlag,
1189 const bool theUpdateViewer)
1191 myCustomPrs->deactivate(theFlag, theUpdateViewer);
1194 //******************************************************
1195 //bool PartSet_Module::customisePresentation(ResultPtr theResult, AISObjectPtr thePrs,
1196 // std::shared_ptr<GeomAPI_ICustomPrs> theCustomPrs)
1198 // bool aCustomized = false;
1200 // XGUI_Workshop* aWorkshop = getWorkshop();
1201 // XGUI_Displayer* aDisplayer = aWorkshop->displayer();
1202 // ObjectPtr anObject = aDisplayer->getObject(thePrs);
1204 // return aCustomized;
1206 // if (!theResult.get()) {
1207 // std::vector<int> aColor;
1208 // XGUI_CustomPrs::getDefaultColor(anObject, true, aColor);
1209 // if (!aColor.empty()) {
1210 // aCustomized = thePrs->setColor(aColor[0], aColor[1], aColor[2]);
1213 // // customize dimentional constrains
1214 // sketchMgr()->customisePresentation(anObject);
1216 // return aCustomized;
1219 ////******************************************************
1220 //bool PartSet_Module::afterCustomisePresentation(std::shared_ptr<ModelAPI_Result> theResult,
1221 // AISObjectPtr thePrs,
1222 // GeomCustomPrsPtr theCustomPrs)
1224 // bool aCustomized = false;
1226 // XGUI_Workshop* aWorkshop = getWorkshop();
1227 // XGUI_Displayer* aDisplayer = aWorkshop->displayer();
1228 // ObjectPtr anObject = aDisplayer->getObject(thePrs);
1230 // return aCustomized;
1232 // std::vector<int> aColor;
1233 // bool aUseCustomColor = true;
1234 // if (aUseCustomColor)
1235 // myOverconstraintListener->getCustomColor(anObject, aColor);
1236 // // customize sketch symbol presentation
1237 // Handle(AIS_InteractiveObject) anAISIO = thePrs->impl<Handle(AIS_InteractiveObject)>();
1238 // if (!anAISIO.IsNull()) {
1239 // if (!Handle(SketcherPrs_SymbolPrs)::DownCast(anAISIO).IsNull()) {
1240 // Handle(SketcherPrs_SymbolPrs) aPrs = Handle(SketcherPrs_SymbolPrs)::DownCast(anAISIO);
1241 // if (!aPrs.IsNull()) {
1242 // aPrs->SetCustomColor(aColor);
1243 // aCustomized = true;
1245 // } else if (!Handle(SketcherPrs_Coincident)::DownCast(anAISIO).IsNull()) {
1246 // Handle(SketcherPrs_Coincident) aPrs = Handle(SketcherPrs_Coincident)::DownCast(anAISIO);
1247 // if (!aPrs.IsNull()) {
1248 // aPrs->SetCustomColor(aColor);
1249 // aCustomized = true;
1253 // // customize sketch dimension constraint presentation
1254 // if (!aCustomized) {
1255 // if (!aColor.empty()) { // otherwise presentation has the default color
1256 // aCustomized = thePrs->setColor(aColor[0], aColor[1], aColor[2]);
1259 // return aCustomized;
1262 //******************************************************
1263 bool PartSet_Module::customizeFeature(ObjectPtr theObject, const ModuleBase_CustomizeFlag& theFlag,
1264 const bool theUpdateViewer)
1266 bool isRedisplayed = false;
1267 if (myCustomPrs->isActive(theFlag))
1268 isRedisplayed = myCustomPrs->redisplay(theObject, theFlag, theUpdateViewer);
1270 return isRedisplayed;
1273 //******************************************************
1274 void PartSet_Module::customizeObjectBrowser(QWidget* theObjectBrowser)
1276 XGUI_ObjectsBrowser* aOB = dynamic_cast<XGUI_ObjectsBrowser*>(theObjectBrowser);
1278 QLabel* aLabel = aOB->activeDocLabel();
1279 aLabel->installEventFilter(myMenuMgr);
1280 connect(aLabel, SIGNAL(customContextMenuRequested(const QPoint&)),
1281 SLOT(onActiveDocPopup(const QPoint&)));
1282 aOB->treeView()->setExpandsOnDoubleClick(false);
1283 connect(aOB->treeView(), SIGNAL(doubleClicked(const QModelIndex&)),
1284 SLOT(onTreeViewDoubleClick(const QModelIndex&)));
1286 Events_Loop* aLoop = Events_Loop::loop();
1287 aLoop->registerListener(this, Events_Loop::eventByName(EVENT_OBJECT_CREATED));
1291 //******************************************************
1292 void PartSet_Module::onActiveDocPopup(const QPoint& thePnt)
1294 SessionPtr aMgr = ModelAPI_Session::get();
1295 QAction* aActivatePartAction = myMenuMgr->action("ACTIVATE_PARTSET_CMD");
1297 XGUI_Workshop* aWorkshop = getWorkshop();
1298 QLabel* aHeader = aWorkshop->objectBrowser()->activeDocLabel();
1300 aActivatePartAction->setEnabled((aMgr->activeDocument() != aMgr->moduleDocument()));
1303 aMenu.addAction(aActivatePartAction);
1306 if (aMgr->activeDocument() == aMgr->moduleDocument()) {
1307 DocumentPtr aDoc = aMgr->moduleDocument();
1308 int aNbParts = aDoc->size(ModelAPI_ResultPart::group());
1309 bool aHaveToActivate = false;
1310 for (int i = 0; i < aNbParts; i++) {
1311 ObjectPtr aObj = aDoc->object(ModelAPI_ResultPart::group(), i);
1312 ResultPartPtr aPartRes = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aObj);
1313 if (!aPartRes->partDoc().get()) {
1314 aHaveToActivate = true;
1318 if (aHaveToActivate) {
1319 QAction* aActivateAllPartAction = myMenuMgr->action("ACTIVATE_ALL_PARTS_CMD");
1320 aMenu.addAction(aActivateAllPartAction);
1325 aMenu.exec(aHeader->mapToGlobal(thePnt));
1328 //******************************************************
1329 AISObjectPtr PartSet_Module::createPresentation(const ObjectPtr& theObject)
1331 Handle(AIS_InteractiveObject) anAISPrs = mySketchMgr->createPresentation(theObject);
1332 if (anAISPrs.IsNull()) {
1333 ResultPtr aResult = std::dynamic_pointer_cast<ModelAPI_Result>(theObject);
1334 if (aResult.get()) {
1335 std::shared_ptr<GeomAPI_Shape> aShapePtr = ModelAPI_Tools::shape(aResult);
1336 if (aShapePtr.get() != NULL)
1337 anAISPrs = new ModuleBase_ResultPrs(aResult);
1340 FieldStepPtr aStep =
1341 std::dynamic_pointer_cast<ModelAPI_ResultField::ModelAPI_FieldStep>(theObject);
1343 anAISPrs = new PartSet_FieldStepPrs(aStep);
1348 if (!anAISPrs.IsNull()) {
1349 Handle(AIS_Shape) aShapePrs = Handle(AIS_Shape)::DownCast(anAISPrs);
1350 if (!aShapePrs.IsNull())
1351 ModuleBase_Tools::setPointBallHighlighting((AIS_Shape*)aShapePrs.get());
1353 anAIS = AISObjectPtr(new GeomAPI_AISObject());
1354 anAIS->setImpl(new Handle(AIS_InteractiveObject)(anAISPrs));
1355 customizePresentation(theObject, anAIS);
1360 //******************************************************
1361 void getResultColor(const ResultPtr& theResult, std::vector<int>& theColor)
1363 ModelAPI_Tools::getColor(theResult, theColor);
1364 if (theColor.empty())
1365 PartSet_Tools::getDefaultColor(theResult, false, theColor);
1368 //******************************************************
1369 double getResultDeflection(const ResultPtr& theResult)
1371 double aDeflection = ModelAPI_Tools::getDeflection(theResult);
1372 if (aDeflection < 0)
1373 aDeflection = PartSet_Tools::getDefaultDeflection(theResult);
1377 //******************************************************
1378 double getResultTransparency(const ResultPtr& theResult)
1380 double aTransparency = ModelAPI_Tools::getTransparency(theResult);
1381 if (aTransparency < 0)
1382 aTransparency = PartSet_Tools::getDefaultTransparency();
1383 return aTransparency;
1387 //******************************************************
1388 void PartSet_Module::customizePresentation(const ObjectPtr& theObject,
1389 const AISObjectPtr& thePrs) const
1391 if (mySketchMgr->isObjectOfSketch(theObject)) {
1392 mySketchMgr->customizeSketchPresentation(theObject, thePrs);
1395 ResultPtr aResult = std::dynamic_pointer_cast<ModelAPI_Result>(theObject);
1396 if (aResult.get()) {
1397 std::vector<int> aColor;
1398 getResultColor(aResult, aColor);
1400 SessionPtr aMgr = ModelAPI_Session::get();
1401 if (aMgr->activeDocument() != aResult->document()) {
1402 QColor aQColor(aColor[0], aColor[1], aColor[2]);
1404 QColor::fromHsvF(aQColor.hueF(), aQColor.saturationF() / 3., aQColor.valueF());
1405 aColor[0] = aNewColor.red();
1406 aColor[1] = aNewColor.green();
1407 aColor[2] = aNewColor.blue();
1409 thePrs->setColor(aColor[0], aColor[1], aColor[2]);
1411 thePrs->setDeflection(getResultDeflection(aResult));
1413 thePrs->setTransparency(getResultTransparency(aResult));
1415 FeaturePtr aFeature = ModelAPI_Feature::feature(theObject);
1416 if (aFeature.get()) {
1417 if (aFeature->getKind() == SketchPlugin_Sketch::ID())
1418 thePrs->setWidth(2);
1424 //******************************************************
1425 ObjectPtr PartSet_Module::findPresentedObject(const AISObjectPtr& theAIS) const
1428 ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
1430 /// If last line finished on vertex the lines creation sequence has to be break
1431 ModuleBase_IPropertyPanel* aPanel = aOperation->propertyPanel();
1433 ModuleBase_ModelWidget* anActiveWidget = aPanel->activeWidget();
1434 // if there is an active widget, find the presented object in it
1435 if (!anActiveWidget)
1436 anActiveWidget = aPanel->preselectionWidget();
1438 ModuleBase_WidgetValidated* aWidgetValidated = dynamic_cast<ModuleBase_WidgetValidated*>
1440 if (aWidgetValidated)
1441 anObject = aWidgetValidated->findPresentedObject(theAIS);
1447 //******************************************************
1448 bool PartSet_Module::canBeShaded(Handle(AIS_InteractiveObject) theAIS) const
1450 bool aCanBeShaged = true;
1452 Handle(PartSet_ResultSketchPrs) aPrs = Handle(PartSet_ResultSketchPrs)::DownCast(theAIS);
1454 aCanBeShaged = false;
1456 return aCanBeShaged;
1459 //******************************************************
1460 void PartSet_Module::addObjectBrowserMenu(QMenu* theMenu) const
1462 QObjectPtrList aObjects = myWorkshop->selection()->selectedObjects();
1463 int aSelected = aObjects.size();
1464 SessionPtr aMgr = ModelAPI_Session::get();
1465 QAction* aActivatePartAction = myMenuMgr->action("ACTIVATE_PART_CMD");
1467 bool hasResult = false;
1468 bool hasFeature = false;
1469 bool hasParameter = false;
1470 bool hasCompositeOwner = false;
1471 bool hasResultInHistory = false;
1472 bool hasFolder = false;
1473 ModuleBase_Tools::checkObjects(aObjects, hasResult, hasFeature, hasParameter,
1474 hasCompositeOwner, hasResultInHistory, hasFolder);
1476 ModuleBase_Operation* aCurrentOp = myWorkshop->currentOperation();
1477 if (aSelected == 1) {
1478 ObjectPtr aObject = aObjects.first();
1480 ResultPartPtr aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aObject);
1481 FeaturePtr aFeature = std::dynamic_pointer_cast<ModelAPI_Feature>(aObject);
1482 bool isPart = aPart.get() ||
1483 (aFeature.get() && (aFeature->getKind() == PartSetPlugin_Part::ID()));
1485 DocumentPtr aPartDoc;
1487 aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aFeature->firstResult());
1489 if (aPart.get()) // this may be null is Part feature is disabled
1490 aPartDoc = aPart->partDoc();
1492 theMenu->addAction(aActivatePartAction);
1493 aActivatePartAction->setEnabled((aMgr->activeDocument() != aPartDoc));
1495 } else if (aObject->document() == aMgr->activeDocument()) {
1496 if (hasParameter || hasFeature) {
1497 myMenuMgr->action("EDIT_CMD")->setEnabled(true);
1498 theMenu->addAction(myMenuMgr->action("EDIT_CMD"));
1499 if (aCurrentOp && aFeature.get()) {
1500 if (aCurrentOp->id().toStdString() == aFeature->getKind())
1501 myMenuMgr->action("EDIT_CMD")->setEnabled(false);
1508 myMenuMgr->action("EDIT_CMD")->setEnabled(aCurrentOp == 0);
1509 theMenu->addAction(myMenuMgr->action("EDIT_CMD"));
1510 theMenu->addSeparator();
1513 bool aNotDeactivate = (aCurrentOp == 0);
1514 if (!aNotDeactivate) {
1515 aActivatePartAction->setEnabled(false);
1519 //******************************************************
1520 #define EXPAND_PARENT(OBJ) \
1521 QModelIndex aObjIndex = aDataModel->objectIndex(OBJ); \
1522 if (aObjIndex.isValid()) { \
1523 QModelIndex aParent = aObjIndex.parent(); \
1524 int aCount = aDataModel->rowCount(aParent); \
1526 aTreeView->setExpanded(aParent, true); \
1529 //******************************************************
1530 void PartSet_Module::processEvent(const std::shared_ptr<Events_Message>& theMessage)
1532 if (theMessage->eventID() == Events_Loop::loop()->eventByName(EVENT_DOCUMENT_CHANGED)) {
1533 // Do not change activation of parts if an operation active
1534 static QStringList aAllowActivationList;
1535 if (aAllowActivationList.isEmpty())
1536 aAllowActivationList <<
1537 QString(PartSetPlugin_Part::ID().c_str()) <<
1538 QString(PartSetPlugin_Duplicate::ID().c_str()) <<
1539 QString(PartSetPlugin_Remove::ID().c_str());
1540 if (myWorkshop->currentOperation() &&
1541 (!aAllowActivationList.contains(myWorkshop->currentOperation()->id())))
1543 XGUI_Workshop* aWorkshop = getWorkshop();
1544 XGUI_DataTree* aTreeView = aWorkshop->objectBrowser()->treeView();
1545 QLabel* aLabel = aWorkshop->objectBrowser()->activeDocLabel();
1546 QPalette aPalet = aLabel->palette();
1548 SessionPtr aMgr = ModelAPI_Session::get();
1549 DocumentPtr aActiveDoc = aMgr->activeDocument();
1551 // Clear active part index if there is no Part documents
1552 // It could be not null if document was closed and opened a new
1553 // without closeDocument call
1554 if (aMgr->allOpenedDocuments().size() <= 1)
1555 myActivePartIndex = QModelIndex();
1557 XGUI_DataModel* aDataModel = aWorkshop->objectBrowser()->dataModel();
1558 QModelIndex aOldActive = myActivePartIndex;
1559 myActivePartIndex = aDataModel->documentRootIndex(aActiveDoc, 0);
1560 bool needUpdate = false;
1561 if (myActivePartIndex.isValid()) {
1562 needUpdate = aTreeView->isExpanded(myActivePartIndex);
1564 aTreeView->setExpanded(myActivePartIndex, true);
1566 if ((aOldActive != myActivePartIndex) && (aOldActive.isValid()))
1567 aTreeView->setExpanded(aOldActive, false);
1569 aLabel->setPalette(aPalet);
1570 aWorkshop->updateCommandStatus();
1572 // Update displayed objects in order to update active color
1573 XGUI_Displayer* aDisplayer = aWorkshop->displayer();
1574 QObjectPtrList aObjects = aDisplayer->displayedObjects();
1576 foreach(ObjectPtr aObj, aObjects) {
1577 aHidden = !aObj->data() || !aObj->data()->isValid() ||
1578 aObj->isDisabled() || (!aObj->isDisplayed());
1580 aDisplayer->redisplay(aObj, false);
1583 aDisplayer->updateViewer();
1584 // Update tree items if they are expanded
1586 aTreeView->viewport()->update(aTreeView->viewport()->rect());
1588 } else if (theMessage->eventID() == Events_Loop::loop()->eventByName(EVENT_OBJECT_CREATED)) {
1589 std::shared_ptr<ModelAPI_ObjectUpdatedMessage> aUpdMsg =
1590 std::dynamic_pointer_cast<ModelAPI_ObjectUpdatedMessage>(theMessage);
1591 std::set<ObjectPtr> aObjects = aUpdMsg->objects();
1593 ObjectPtr aConstrObj;
1594 ObjectPtr aResultObj;
1595 std::set<ObjectPtr>::const_iterator aIt;
1596 DocumentPtr aRootDoc = ModelAPI_Session::get()->moduleDocument();
1597 for (aIt = aObjects.begin(); aIt != aObjects.end(); ++aIt) {
1598 ObjectPtr aObject = (*aIt);
1599 if ((!aResultObj.get()) && (aObject->groupName() == ModelAPI_ResultBody::group())
1600 && (aObject->document() != aRootDoc))
1601 aResultObj = aObject;
1602 if ((!aConstrObj.get()) && (aObject->groupName() == ModelAPI_ResultConstruction::group())
1603 && (aObject->document() != aRootDoc))
1604 aConstrObj = aObject;
1605 if (aResultObj.get() && aConstrObj.get())
1609 if (aResultObj.get() || aConstrObj.get()) {
1610 XGUI_Workshop* aWorkshop = getWorkshop();
1611 XGUI_DataTree* aTreeView = aWorkshop->objectBrowser()->treeView();
1612 XGUI_DataModel* aDataModel = aWorkshop->objectBrowser()->dataModel();
1614 if (aResultObj.get()) {
1615 EXPAND_PARENT(aResultObj)
1617 if (aConstrObj.get()) {
1618 EXPAND_PARENT(aConstrObj)
1622 else if (theMessage->eventID() == Events_Loop::loop()->eventByName(EVENT_OBJECT_TO_REDISPLAY)) {
1623 CompositeFeaturePtr aSketch = mySketchMgr->activeSketch();
1624 if (aSketch.get()) {
1625 ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
1626 if (PartSet_SketcherMgr::isSketchOperation(anOperation))
1627 mySketchMgr->previewSketchPlane()->createSketchPlane(aSketch, myWorkshop);
1632 //******************************************************
1633 void PartSet_Module::onTreeViewDoubleClick(const QModelIndex& theIndex)
1635 if (myWorkshop->currentOperation()) // Do not change activation of parts if an operation active
1637 SessionPtr aMgr = ModelAPI_Session::get();
1638 if (!theIndex.isValid()) {
1639 // It seems that this code is obsolete
1640 //aMgr->setActiveDocument(aMgr->moduleDocument());
1643 if (theIndex.column() != 1) // Use only first column
1646 XGUI_Workshop* aWorkshop = getWorkshop();
1647 XGUI_DataModel* aDataModel = aWorkshop->objectBrowser()->dataModel();
1648 // De not use non editable Indexes
1649 if ((aDataModel->flags(theIndex) & Qt::ItemIsSelectable) == 0)
1651 ObjectPtr aObj = aDataModel->object(theIndex);
1653 ResultPartPtr aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aObj);
1654 if (!aPart.get()) { // Probably this is Feature
1655 FeaturePtr aPartFeature = std::dynamic_pointer_cast<ModelAPI_Feature>(aObj);
1656 if (aPartFeature.get() && (aPartFeature->getKind() == PartSetPlugin_Part::ID())) {
1657 aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aPartFeature->firstResult());
1660 if (aPart.get()) { // if this is a part
1661 if (aPart->partDoc() == aMgr->activeDocument()) {
1662 myMenuMgr->activatePartSet();
1664 myMenuMgr->activatePart(aPart);
1669 //******************************************************
1670 void PartSet_Module::onViewCreated(ModuleBase_IViewWindow*)
1672 // z layer is created for all started operations in order to visualize operation AIS presentation
1674 Handle(AIS_InteractiveContext) aContext = myWorkshop->viewer()->AISContext();
1675 if (aContext.IsNull())
1678 Handle(V3d_Viewer) aViewer = aContext->CurrentViewer();
1679 if (myVisualLayerId == 0) {
1680 if (myVisualLayerId == 0)
1681 aViewer->AddZLayer(myVisualLayerId);
1683 TColStd_SequenceOfInteger aZList;
1684 aViewer->GetAllZLayers(aZList);
1685 bool aFound = false;
1686 for (int i = 1; i <= aZList.Length(); i++) {
1687 if (aZList(i) == myVisualLayerId) {
1693 aViewer->AddZLayer(myVisualLayerId);
1695 // if there is an active operation with validated widget,
1696 // the filters of this widget should be activated in the created view
1697 myWorkshop->selectionActivate()->updateSelectionFilters();
1698 myWorkshop->selectionActivate()->updateSelectionModes();
1701 //******************************************************
1702 void PartSet_Module::widgetStateChanged(int thePreviousState)
1704 mySketchMgr->widgetStateChanged(thePreviousState);
1707 //******************************************************
1708 bool PartSet_Module::processEnter(const std::string& thePreviousAttributeID)
1710 return mySketchReentrantMgr->processEnter(thePreviousAttributeID);
1713 //******************************************************
1714 void PartSet_Module::beforeOperationStopped(ModuleBase_Operation* theOperation)
1716 if (PartSet_SketcherMgr::isSketchOperation(theOperation)) {
1717 mySketchMgr->stopSketch(theOperation);
1721 //******************************************************
1722 GeomShapePtr PartSet_Module::findShape(const AttributePtr& theAttribute)
1724 GeomShapePtr aGeomShape;
1726 ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
1727 if (anOperation && sketchMgr()->isNestedSketchOperation(anOperation)) {
1728 aGeomShape = PartSet_Tools::findShapeBy2DPoint(theAttribute, myWorkshop);
1733 //******************************************************
1734 AttributePtr PartSet_Module::findAttribute(const ObjectPtr& theObject,
1735 const GeomShapePtr& theGeomShape)
1737 AttributePtr anAttribute;
1738 GeomShapePtr aGeomShape = theGeomShape;
1739 if (!aGeomShape.get()) {
1740 // processing shape of result, e.g. sketch circle center is selected, this is a result
1741 // the geom shape is empty, the shape of result should be used
1742 ResultPtr aResult = std::dynamic_pointer_cast<ModelAPI_Result>(theObject);
1743 if (aResult.get()) {
1744 aGeomShape = aResult->shape();
1748 if (aGeomShape.get()) {
1749 TopoDS_Shape aTDSShape = aGeomShape->impl<TopoDS_Shape>();
1750 std::pair<AttributePtr, int> anAttrAndIndex =
1751 PartSet_Tools::findAttributeBy2dPoint(theObject, aTDSShape, mySketchMgr->activeSketch());
1752 return anAttrAndIndex.first;
1757 //******************************************************
1758 std::shared_ptr<Events_Message> PartSet_Module::reentrantMessage()
1760 return sketchReentranceMgr()->reentrantMessage();
1763 //******************************************************
1764 void PartSet_Module::setReentrantPreSelection(const std::shared_ptr<Events_Message>& theMessage)
1766 sketchReentranceMgr()->setReentrantPreSelection(theMessage);
1769 //******************************************************
1770 void PartSet_Module::onChoiceChanged(ModuleBase_ModelWidget* theWidget,
1773 ModuleBase_WidgetChoice* aChoiceWidget = dynamic_cast<ModuleBase_WidgetChoice*>(theWidget);
1777 QString aChoiceTitle = aChoiceWidget->getPropertyPanelTitle(theIndex);
1778 if (!aChoiceTitle.isEmpty()) {
1779 ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
1782 ModuleBase_IPropertyPanel* aPanel = aOperation->propertyPanel();
1784 aPanel->setWindowTitle(aChoiceTitle);
1788 //******************************************************
1789 XGUI_Workshop* PartSet_Module::getWorkshop() const
1791 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
1792 return aConnector->workshop();
1795 void PartSet_Module::setDefaultConstraintShown()
1797 myHasConstraintShown[PartSet_Tools::Geometrical] = true;
1798 myHasConstraintShown[PartSet_Tools::Dimensional] = true;
1799 myHasConstraintShown[PartSet_Tools::Expressions] = false;
1802 //******************************************************
1803 ModuleBase_ITreeNode* PartSet_Module::rootNode() const
1808 //******************************************************
1809 void PartSet_Module::disableCustomMode(ModuleBase_CustomizeFlag theMode) {
1810 myCustomPrs->disableCustomMode(theMode);
1813 //******************************************************
1814 void PartSet_Module::enableCustomModes() {
1815 myCustomPrs->enableCustomModes();