1 // Copyright (C) 2014-20xx CEA/DEN, EDF R&D
3 #include "PartSet_Module.h"
4 #include "PartSet_WidgetSketchLabel.h"
5 #include "PartSet_Validators.h"
6 #include "PartSet_Tools.h"
7 #include "PartSet_WidgetPoint2d.h"
8 #include "PartSet_WidgetPoint2dDistance.h"
9 #include "PartSet_WidgetShapeSelector.h"
10 #include "PartSet_WidgetPoint2dAngle.h"
11 #include "PartSet_WidgetMultiSelector.h"
12 #include "PartSet_WidgetEditor.h"
13 #include "PartSet_WidgetFileSelector.h"
14 #include "PartSet_WidgetSketchCreator.h"
15 #include "PartSet_SketcherMgr.h"
16 #include "PartSet_MenuMgr.h"
17 #include "PartSet_CustomPrs.h"
18 #include "PartSet_IconFactory.h"
20 #include "PartSet_Filters.h"
21 #include "PartSet_FilterInfinite.h"
23 #include <PartSetPlugin_Remove.h>
24 #include <PartSetPlugin_Part.h>
25 #include <PartSetPlugin_Duplicate.h>
27 #include <ModuleBase_Operation.h>
28 #include <ModuleBase_OperationAction.h>
29 #include <ModuleBase_IViewer.h>
30 #include <ModuleBase_IViewWindow.h>
31 #include <ModuleBase_IPropertyPanel.h>
32 #include <ModuleBase_WidgetEditor.h>
33 #include <ModuleBase_WidgetValidated.h>
34 #include <ModuleBase_FilterFactory.h>
35 #include <ModuleBase_Tools.h>
36 #include <ModuleBase_OperationFeature.h>
38 #include <GeomValidators_ShapeType.h>
39 #include <GeomValidators_Finite.h>
40 #include <GeomValidators_Face.h>
41 #include <GeomValidators_ConstructionComposite.h>
42 #include <GeomValidators_ZeroOffset.h>
43 #include <GeomValidators_BooleanArguments.h>
44 #include <GeomValidators_Different.h>
47 #include <ModelAPI_Object.h>
48 #include <ModelAPI_Events.h>
49 #include <ModelAPI_Validator.h>
50 #include <ModelAPI_Data.h>
51 #include <ModelAPI_Session.h>
52 #include <ModelAPI_ShapeValidator.h>
53 #include <ModelAPI_ResultBody.h>
55 #include <GeomDataAPI_Point2D.h>
56 #include <GeomDataAPI_Point.h>
57 #include <GeomDataAPI_Dir.h>
59 #include <XGUI_Displayer.h>
60 #include <XGUI_Workshop.h>
61 #include <XGUI_OperationMgr.h>
62 #include <XGUI_PropertyPanel.h>
63 #include <XGUI_ModuleConnector.h>
64 #include <XGUI_ContextMenuMgr.h>
65 #include <XGUI_Tools.h>
66 #include <XGUI_ObjectsBrowser.h>
67 #include <XGUI_SelectionMgr.h>
68 #include <XGUI_DataModel.h>
70 #include <SketchPlugin_Feature.h>
71 #include <SketchPlugin_Sketch.h>
72 #include <SketchPlugin_Line.h>
73 #include <SketchPlugin_Arc.h>
74 #include <SketchPlugin_Circle.h>
75 #include <SketchPlugin_Point.h>
76 #include <SketchPlugin_ConstraintAngle.h>
77 #include <SketchPlugin_ConstraintLength.h>
78 #include <SketchPlugin_ConstraintDistance.h>
79 #include <SketchPlugin_ConstraintParallel.h>
80 #include <SketchPlugin_ConstraintPerpendicular.h>
81 #include <SketchPlugin_ConstraintRadius.h>
83 #include <SketcherPrs_SymbolPrs.h>
84 #include <SketcherPrs_Tools.h>
86 #include <Events_Loop.h>
87 #include <Config_PropManager.h>
88 #include <Config_Keywords.h>
90 #include <StdSelect_TypeOfFace.hxx>
91 #include <TopoDS_Vertex.hxx>
93 #include <TopoDS_Shape.hxx>
94 #include <BRep_Tool.hxx>
95 #include <AIS_Dimension.hxx>
98 #include <QMouseEvent>
101 #include <QApplication>
102 #include <QMessageBox>
103 #include <QMainWindow>
106 #include <GeomAlgoAPI_FaceBuilder.h>
107 #include <GeomDataAPI_Dir.h>
109 #include <SelectMgr_ListIteratorOfListOfFilter.hxx>
115 /*!Create and return new instance of XGUI_Module*/
116 extern "C" PARTSET_EXPORT ModuleBase_IModule* createModule(ModuleBase_IWorkshop* theWshop)
118 return new PartSet_Module(theWshop);
121 PartSet_Module::PartSet_Module(ModuleBase_IWorkshop* theWshop)
122 : ModuleBase_IModule(theWshop),
123 myRestartingMode(RM_None), myVisualLayerId(0)
125 new PartSet_IconFactory();
127 mySketchMgr = new PartSet_SketcherMgr(this);
128 myDataModel = new PartSet_DocumentDataModel(this);
130 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(theWshop);
131 XGUI_Workshop* aWorkshop = aConnector->workshop();
133 XGUI_OperationMgr* anOpMgr = aWorkshop->operationMgr();
134 connect(anOpMgr, SIGNAL(keyEnterReleased()), this, SLOT(onEnterReleased()));
135 connect(anOpMgr, SIGNAL(operationActivatedByPreselection()),
136 this, SLOT(onOperationActivatedByPreselection()));
138 ModuleBase_IViewer* aViewer = theWshop->viewer();
139 connect(aViewer, SIGNAL(keyRelease(ModuleBase_IViewWindow*, QKeyEvent*)),
140 this, SLOT(onKeyRelease(ModuleBase_IViewWindow*, QKeyEvent*)));
141 connect(aViewer, SIGNAL(viewTransformed(int)),
142 SLOT(onViewTransformed(int)));
143 connect(aViewer, SIGNAL(viewCreated(ModuleBase_IViewWindow*)),
144 SLOT(onViewCreated(ModuleBase_IViewWindow*)));
146 myMenuMgr = new PartSet_MenuMgr(this);
147 myCustomPrs = new PartSet_CustomPrs(theWshop);
149 Events_Loop* aLoop = Events_Loop::loop();
150 aLoop->registerListener(this, Events_Loop::eventByName(EVENT_DOCUMENT_CHANGED));
152 mySelectionFilters.Append(new PartSet_GlobalFilter(myWorkshop));
153 mySelectionFilters.Append(new PartSet_FilterInfinite(myWorkshop));
156 PartSet_Module::~PartSet_Module()
158 SelectMgr_ListIteratorOfListOfFilter aIt(mySelectionFilters);
159 for (; aIt.More(); aIt.Next()) {
160 Handle(SelectMgr_Filter) aFilter = aIt.Value();
161 if (!aFilter.IsNull())
167 void PartSet_Module::activateSelectionFilters()
169 SelectMgr_ListIteratorOfListOfFilter aIt(mySelectionFilters);
170 for (; aIt.More(); aIt.Next()) {
171 Handle(SelectMgr_Filter) aFilter = aIt.Value();
172 if (!aFilter.IsNull())
173 myWorkshop->viewer()->addSelectionFilter(aFilter);
177 void PartSet_Module::deactivateSelectionFilters()
179 SelectMgr_ListIteratorOfListOfFilter aIt(mySelectionFilters);
180 for (; aIt.More(); aIt.Next()) {
181 Handle(SelectMgr_Filter) aFilter = aIt.Value();
182 if (!aFilter.IsNull())
183 myWorkshop->viewer()->removeSelectionFilter(aFilter);
187 void PartSet_Module::registerValidators()
189 //Registering of validators
190 SessionPtr aMgr = ModelAPI_Session::get();
191 ModelAPI_ValidatorsFactory* aFactory = aMgr->validators();
192 aFactory->registerValidator("PartSet_DistanceSelection", new PartSet_DistanceSelection);
193 aFactory->registerValidator("PartSet_LengthSelection", new PartSet_LengthSelection);
194 aFactory->registerValidator("PartSet_PerpendicularSelection", new PartSet_PerpendicularSelection);
195 aFactory->registerValidator("PartSet_ParallelSelection", new PartSet_ParallelSelection);
196 aFactory->registerValidator("PartSet_RadiusSelection", new PartSet_RadiusSelection);
197 aFactory->registerValidator("PartSet_RigidSelection", new PartSet_RigidSelection);
198 aFactory->registerValidator("PartSet_CoincidentSelection", new PartSet_CoincidentSelection);
199 aFactory->registerValidator("PartSet_HVDirSelection", new PartSet_HVDirSelection);
200 aFactory->registerValidator("PartSet_TangentSelection", new PartSet_TangentSelection);
201 aFactory->registerValidator("PartSet_FilletSelection", new PartSet_FilletSelection);
202 aFactory->registerValidator("PartSet_AngleSelection", new PartSet_AngleSelection);
204 aFactory->registerValidator("PartSet_DifferentObjects", new PartSet_DifferentObjectsValidator);
205 aFactory->registerValidator("PartSet_DifferentShapes", new ModelAPI_ShapeValidator);
207 aFactory->registerValidator("PartSet_CoincidentAttr", new PartSet_CoincidentAttr);
209 aFactory->registerValidator("GeomValidators_ShapeType", new GeomValidators_ShapeType);
210 aFactory->registerValidator("GeomValidators_Face", new GeomValidators_Face);
212 aFactory->registerValidator("GeomValidators_Finite", new GeomValidators_Finite);
214 aFactory->registerValidator("GeomValidators_ConstructionComposite",
215 new GeomValidators_ConstructionComposite);
217 aFactory->registerValidator("GeomValidators_ZeroOffset",
218 new GeomValidators_ZeroOffset);
220 aFactory->registerValidator("GeomValidators_BooleanArguments",
221 new GeomValidators_BooleanArguments);
223 aFactory->registerValidator("PartSet_SketchEntityValidator",
224 new PartSet_SketchEntityValidator);
226 aFactory->registerValidator("PartSet_SameTypeAttr",
227 new PartSet_SameTypeAttrValidator);
229 aFactory->registerValidator("GeomValidators_Different",
230 new GeomValidators_Different);
233 void PartSet_Module::registerFilters()
235 //Registering of selection filters
236 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
237 ModuleBase_FilterFactory* aFactory = aConnector->selectionFilters();
240 void PartSet_Module::registerProperties()
242 Config_PropManager::registerProp("Sketch planes", "planes_size", "Size", Config_Prop::Double,
244 Config_PropManager::registerProp("Sketch planes", "planes_thickness", "Thickness",
245 Config_Prop::Integer, SKETCH_WIDTH);
248 void PartSet_Module::onOperationCommitted(ModuleBase_Operation* theOperation)
250 if (PartSet_SketcherMgr::isNestedSketchOperation(theOperation)) {
251 mySketchMgr->commitNestedSketch(theOperation);
254 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>(theOperation);
255 if (!aFOperation || aFOperation->isEditOperation())
257 // the selection is cleared after commit the create operation
258 // in order to do not use the same selected objects in the restarted operation
259 // for common behaviour, the selection is cleared even if the operation is not restarted
260 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
261 XGUI_Workshop* aWorkshop = aConnector->workshop();
262 aWorkshop->selector()->clearSelection();
264 /// Restart sketcher operations automatically
265 FeaturePtr aFeature = aFOperation->feature();
266 std::shared_ptr<SketchPlugin_Feature> aSPFeature =
267 std::dynamic_pointer_cast<SketchPlugin_Feature>(aFeature);
268 if (aSPFeature && (myRestartingMode == RM_LastFeatureUsed ||
269 myRestartingMode == RM_EmptyFeatureUsed)) {
270 myLastOperationId = aFOperation->id();
271 myLastFeature = myRestartingMode == RM_LastFeatureUsed ? aFOperation->feature() : FeaturePtr();
273 launchOperation(myLastOperationId);
275 breakOperationSequence();
278 void PartSet_Module::breakOperationSequence()
280 myLastOperationId = "";
281 myLastFeature = FeaturePtr();
282 myRestartingMode = RM_None;
285 void PartSet_Module::onOperationAborted(ModuleBase_Operation* theOperation)
287 breakOperationSequence();
290 void PartSet_Module::onOperationStarted(ModuleBase_Operation* theOperation)
292 if (PartSet_SketcherMgr::isSketchOperation(theOperation)) {
293 mySketchMgr->startSketch(theOperation);
295 else if (PartSet_SketcherMgr::isNestedSketchOperation(theOperation)) {
296 mySketchMgr->startNestedSketch(theOperation);
299 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>(theOperation);
301 myCustomPrs->activate(aFOperation->feature());
304 void PartSet_Module::onOperationStopped(ModuleBase_Operation* theOperation)
306 myCustomPrs->deactivate();
308 if (PartSet_SketcherMgr::isSketchOperation(theOperation)) {
309 mySketchMgr->stopSketch(theOperation);
311 else if (PartSet_SketcherMgr::isNestedSketchOperation(theOperation)) {
312 mySketchMgr->stopNestedSketch(theOperation);
316 ModuleBase_Operation* PartSet_Module::currentOperation() const
318 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
319 XGUI_OperationMgr* anOpMgr = aConnector->workshop()->operationMgr();
320 return anOpMgr->currentOperation();
323 bool PartSet_Module::canUndo() const
325 bool aCanUndo = false;
326 SessionPtr aMgr = ModelAPI_Session::get();
327 if (aMgr->hasModuleDocument() && aMgr->canUndo()) {
328 aCanUndo = !aMgr->isOperation();
329 if (!aCanUndo) // check the enable state additionally by sketch manager
330 aCanUndo = aMgr->canUndo();
335 bool PartSet_Module::canRedo() const
337 bool aCanRedo = false;
338 SessionPtr aMgr = ModelAPI_Session::get();
339 if (aMgr->hasModuleDocument() && aMgr->canRedo()) {
340 aCanRedo = !aMgr->isOperation();
341 if (!aCanRedo) // check the enable state additionally by sketch manager
342 aCanRedo = aMgr->canRedo();
347 bool PartSet_Module::canApplyAction(const ObjectPtr& theObject, const QString& theActionId) const
350 if (theActionId == "DELETE_CMD" || theActionId == "MOVE_CMD") {
351 FeaturePtr aFeature = ModelAPI_Feature::feature(theObject);
353 // part features are removed in the PartSet module only.
354 if (aFeature->getKind() == PartSetPlugin_Part::ID())
361 bool PartSet_Module::canCommitOperation() const
363 return mySketchMgr->canCommitOperation();
366 bool PartSet_Module::canEraseObject(const ObjectPtr& theObject) const
368 // the sketch manager put the restriction to the objects erase
369 return mySketchMgr->canEraseObject(theObject);
372 bool PartSet_Module::canDisplayObject(const ObjectPtr& theObject) const
374 // the sketch manager put the restriction to the objects display
375 return mySketchMgr->canDisplayObject(theObject);
378 bool PartSet_Module::canActivateSelection(const ObjectPtr& theObject) const
380 bool aCanActivate = ModuleBase_IModule::canActivateSelection(theObject);
382 ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
383 bool isSketchOp = PartSet_SketcherMgr::isSketchOperation(anOperation),
384 isNestedOp = PartSet_SketcherMgr::isNestedSketchOperation(anOperation);
385 if (isSketchOp || isNestedOp) {
386 // in active sketch operation it is possible to activate operation object in selection
387 // in the edit operation, e.g. points of the line can be moved when the line is edited
388 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>(anOperation);
389 aCanActivate = aCanActivate || (aFOperation && aFOperation->isEditOperation());
394 bool PartSet_Module::addViewerMenu(QMenu* theMenu, const QMap<QString, QAction*>& theStdActions) const
396 return myMenuMgr->addViewerMenu(theMenu, theStdActions);
399 void PartSet_Module::updateViewerMenu(const QMap<QString, QAction*>& theStdActions)
401 myMenuMgr->updateViewerMenu(theStdActions);
405 void PartSet_Module::activeSelectionModes(QIntList& theModes)
408 if (mySketchMgr->activeSketch().get())
409 PartSet_SketcherMgr::sketchSelectionModes(theModes);
412 bool PartSet_Module::isMouseOverWindow()
414 return mySketchMgr->isMouseOverWindow();
417 void PartSet_Module::closeDocument()
422 void PartSet_Module::clearViewer()
424 myCustomPrs->clearPrs();
427 void PartSet_Module::propertyPanelDefined(ModuleBase_Operation* theOperation)
429 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>(theOperation);
433 ModuleBase_IPropertyPanel* aPanel = aFOperation->propertyPanel();
434 if (PartSet_SketcherMgr::isSketchOperation(aFOperation) && (aFOperation->isEditOperation())) {
435 // we have to manually activate the sketch label in edit mode
436 aPanel->activateWidget(aPanel->modelWidgets().first());
440 // Restart last operation type
441 if ((aFOperation->id() == myLastOperationId) && myLastFeature) {
442 ModuleBase_ModelWidget* aWgt = aPanel->activeWidget();
443 if (aFOperation->id().toStdString() == SketchPlugin_Line::ID()) {
444 // Initialise new line with first point equal to end of previous
445 PartSet_WidgetPoint2D* aPnt2dWgt = dynamic_cast<PartSet_WidgetPoint2D*>(aWgt);
447 std::shared_ptr<ModelAPI_Data> aData = myLastFeature->data();
448 std::shared_ptr<GeomDataAPI_Point2D> aPoint =
449 std::dynamic_pointer_cast<GeomDataAPI_Point2D>(aData->attribute(SketchPlugin_Line::END_ID()));
451 aPnt2dWgt->setPoint(aPoint->x(), aPoint->y());
452 PartSet_Tools::setConstraints(mySketchMgr->activeSketch(), aFOperation->feature(),
453 aWgt->attributeID(), aPoint->x(), aPoint->y());
454 aPanel->activateNextWidget(aPnt2dWgt);
462 void PartSet_Module::onSelectionChanged()
464 ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
468 bool isSketcherOp = false;
469 // An edit operation is enable only if the current opeation is the sketch operation
470 if (mySketchMgr->activeSketch()) {
471 if (PartSet_Tools::sketchPlane(mySketchMgr->activeSketch()))
472 isSketcherOp = PartSet_SketcherMgr::isSketchOperation(aOperation);
475 // Editing of constraints can be done on selection
476 ModuleBase_ISelection* aSelect = myWorkshop->selection();
477 QList<ModuleBase_ViewerPrs> aSelected = aSelect->getSelected();
478 if (aSelected.size() == 1) {
479 ModuleBase_ViewerPrs aPrs = aSelected.first();
480 ObjectPtr aObject = aPrs.object();
481 FeaturePtr aFeature = ModelAPI_Feature::feature(aObject);
483 std::string aId = aFeature->getKind();
484 if ((aId == SketchPlugin_ConstraintRadius::ID()) ||
485 (aId == SketchPlugin_ConstraintLength::ID()) ||
486 (aId == SketchPlugin_ConstraintDistance::ID()) ||
487 (aId == SketchPlugin_ConstraintAngle::ID())) {
488 editFeature(aFeature);
495 void PartSet_Module::onKeyRelease(ModuleBase_IViewWindow* theWnd, QKeyEvent* theEvent)
497 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
498 XGUI_OperationMgr* anOpMgr = aConnector->workshop()->operationMgr();
499 anOpMgr->onKeyReleased(theEvent);
502 void PartSet_Module::onEnterReleased()
504 myRestartingMode = RM_EmptyFeatureUsed;
507 void PartSet_Module::onOperationActivatedByPreselection()
509 ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
510 if(anOperation && PartSet_SketcherMgr::isNestedSketchOperation(anOperation)) {
511 // Set final definitions if they are necessary
512 //propertyPanelDefined(aOperation);
514 /// Commit sketcher operations automatically
515 anOperation->commit();
519 void PartSet_Module::onNoMoreWidgets()
521 ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
523 if (PartSet_SketcherMgr::isNestedSketchOperation(anOperation)) {
524 if (myRestartingMode != RM_Forbided)
525 myRestartingMode = RM_LastFeatureUsed;
526 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
527 XGUI_Workshop* aWorkshop = aConnector->workshop();
528 XGUI_OperationMgr* anOpMgr = aWorkshop->operationMgr();
529 // do nothing if the feature can not be applyed
530 if (anOpMgr->isApplyEnabled())
531 anOperation->commit();
536 void PartSet_Module::onVertexSelected()
538 ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
539 if (aOperation->id().toStdString() == SketchPlugin_Line::ID()) {
540 /// If last line finished on vertex the lines creation sequence has to be break
541 ModuleBase_IPropertyPanel* aPanel = aOperation->propertyPanel();
542 ModuleBase_ModelWidget* anActiveWidget = aPanel->activeWidget();
543 const QList<ModuleBase_ModelWidget*>& aWidgets = aPanel->modelWidgets();
544 QList<ModuleBase_ModelWidget*>::const_iterator anIt = aWidgets.begin(), aLast = aWidgets.end();
545 bool aFoundWidget = false;
546 bool aFoundObligatory = false;
547 for (; anIt != aLast && !aFoundObligatory; anIt++) {
549 aFoundWidget = *anIt == anActiveWidget;
551 aFoundObligatory = (*anIt)->isObligatory();
553 if (!aFoundObligatory)
554 myRestartingMode = RM_Forbided;
558 ModuleBase_ModelWidget* PartSet_Module::createWidgetByType(const std::string& theType, QWidget* theParent,
559 Config_WidgetAPI* theWidgetApi, std::string theParentId)
561 ModuleBase_IWorkshop* aWorkshop = workshop();
562 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(aWorkshop);
563 XGUI_Workshop* aXUIWorkshop = aConnector->workshop();
564 ModuleBase_ModelWidget* aWgt = NULL;
565 if (theType == "sketch-start-label") {
566 PartSet_WidgetSketchLabel* aLabelWgt = new PartSet_WidgetSketchLabel(theParent, aWorkshop,
567 theWidgetApi, theParentId, mySketchMgr->isConstraintsShown());
568 connect(aLabelWgt, SIGNAL(planeSelected(const std::shared_ptr<GeomAPI_Pln>&)),
569 mySketchMgr, SLOT(onPlaneSelected(const std::shared_ptr<GeomAPI_Pln>&)));
570 connect(aLabelWgt, SIGNAL(showConstraintToggled(bool)),
571 mySketchMgr, SLOT(onShowConstraintsToggle(bool)));
573 } else if (theType == "sketch-2dpoint_selector") {
574 PartSet_WidgetPoint2D* aPointWgt = new PartSet_WidgetPoint2D(theParent, aWorkshop,
575 theWidgetApi, theParentId);
576 aPointWgt->setSketch(mySketchMgr->activeSketch());
577 connect(aPointWgt, SIGNAL(vertexSelected()), this, SLOT(onVertexSelected()));
579 } else if (theType == "point2ddistance") {
580 PartSet_WidgetPoint2dDistance* aDistanceWgt = new PartSet_WidgetPoint2dDistance(theParent,
581 aWorkshop, theWidgetApi, theParentId);
582 aDistanceWgt->setSketch(mySketchMgr->activeSketch());
584 } else if(theType == "point2dangle") {
585 PartSet_WidgetPoint2dAngle* anAngleWgt = new PartSet_WidgetPoint2dAngle(theParent,
586 aWorkshop, theWidgetApi, theParentId);
587 anAngleWgt->setSketch(mySketchMgr->activeSketch());
589 } else if (theType == "sketch_shape_selector") {
590 PartSet_WidgetShapeSelector* aShapeSelectorWgt =
591 new PartSet_WidgetShapeSelector(theParent, aWorkshop, theWidgetApi, theParentId);
592 aShapeSelectorWgt->setSketcher(mySketchMgr->activeSketch());
593 aWgt = aShapeSelectorWgt;
594 } else if (theType == "sketch_multi_selector") {
595 PartSet_WidgetMultiSelector* aShapeSelectorWgt =
596 new PartSet_WidgetMultiSelector(theParent, aWorkshop, theWidgetApi, theParentId);
597 aShapeSelectorWgt->setSketcher(mySketchMgr->activeSketch());
598 aWgt = aShapeSelectorWgt;
599 } else if (theType == WDG_DOUBLEVALUE_EDITOR) {
600 aWgt = new PartSet_WidgetEditor(theParent, aWorkshop, theWidgetApi, theParentId);
601 } else if (theType == "export_file_selector") {
602 aWgt = new PartSet_WidgetFileSelector(theParent, aWorkshop, theWidgetApi, theParentId);
603 } else if (theType == "sketch_launcher") {
604 aWgt = new PartSet_WidgetSketchCreator(theParent, this, theWidgetApi, theParentId);
610 bool PartSet_Module::deleteObjects()
612 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
613 XGUI_Workshop* aWorkshop = aConnector->workshop();
614 XGUI_OperationMgr* anOpMgr = aWorkshop->operationMgr();
616 //SessionPtr aMgr = ModelAPI_Session::get();
617 // 1. check whether the delete should be processed in the module
618 ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
619 bool isSketchOp = PartSet_SketcherMgr::isSketchOperation(anOperation),
620 isNestedOp = PartSet_SketcherMgr::isNestedSketchOperation(anOperation);
621 if (isSketchOp || isNestedOp) {
622 // 2. find selected presentations
623 // selected objects should be collected before the current operation abort because
624 // the abort leads to selection lost on constraint objects. It can be corrected after #386 issue
625 ModuleBase_ISelection* aSel = workshop()->selection();
626 QObjectPtrList aSelectedObj = aSel->selectedPresentations();
627 // if there are no selected objects in the viewer, that means that the selection in another
628 // place cased this method. It is necessary to return the false value to understande in above
629 // method that delete is not processed
630 if (aSelectedObj.count() == 0)
633 // avoid delete of the objects, which are not belong to the current sketch
634 // in order to do not delete results of other sketches
635 QObjectPtrList aSketchObjects;
636 QObjectPtrList::const_iterator anIt = aSelectedObj.begin(), aLast = aSelectedObj.end();
637 for ( ; anIt != aLast; anIt++) {
638 ObjectPtr anObject = *anIt;
639 if (mySketchMgr->isObjectOfSketch(anObject)) {
640 // sketch feature should be used in this list because workshop deletes features only
641 // results are skipped
642 FeaturePtr aSketchFeature = ModelAPI_Feature::feature(anObject);
643 aSketchObjects.append(aSketchFeature);
646 // if the selection contains only local selected presentations from other sketches,
647 // the Delete operation should not be done at all
648 if (aSketchObjects.size() == 0)
651 // 3. start operation
652 QString aDescription = aWorkshop->contextMenuMgr()->action("DELETE_CMD")->text();
653 ModuleBase_OperationAction* anOpAction = new ModuleBase_OperationAction(aDescription, this);
655 // the active nested sketch operation should be aborted unconditionally
656 // the Delete action should be additionally granted for the Sketch operation
657 // in order to do not abort/commit it
658 if (!anOpMgr->canStartOperation(anOpAction->id(), isSketchOp/*granted*/))
659 return true; // the objects are processed but can not be deleted
661 anOpMgr->startOperation(anOpAction);
663 // 4. delete features
664 // sketch feature should be skipped, only sub-features can be removed
665 // when sketch operation is active
666 aWorkshop->deleteFeatures(aSketchObjects);
668 anOpMgr->commitOperation();
671 bool isPartRemoved = false;
672 // Delete part with help of PartSet plugin
673 // TODO: the deleted objects has to be processed by multiselection
674 QObjectPtrList aObjects = myWorkshop->selection()->selectedObjects();
675 if (aObjects.size() == 1) {
676 ObjectPtr aObj = aObjects.first();
677 FeaturePtr aFeature = std::dynamic_pointer_cast<ModelAPI_Feature>(aObj);
678 if (aFeature.get() && (aFeature->getKind() == PartSetPlugin_Part::ID())) {
679 // Remove feature should be created in the document of the part results
680 ResultPtr aPartResult = aFeature->firstResult();
681 if (aPartResult.get()) {
682 std::shared_ptr<ModelAPI_ResultPart> aPart =
683 std::dynamic_pointer_cast<ModelAPI_ResultPart>(aPartResult);
684 DocumentPtr aPartDoc = aPart->partDoc();
685 if (aPartDoc.get()) {
686 ModuleBase_OperationAction* anOpAction = new ModuleBase_OperationAction
687 (PartSetPlugin_Remove::ID().c_str(), this);
688 if (!anOpMgr->canStartOperation(anOpAction->id()))
689 return true; // the objects are processed but can not be deleted
691 anOpMgr->startOperation(anOpAction);
693 FeaturePtr aFeature = aPartDoc->addFeature(PartSetPlugin_Remove::ID());
696 anOpMgr->commitOperation();
697 isPartRemoved = true;
702 return isPartRemoved;
707 void PartSet_Module::onFeatureTriggered()
709 QAction* aCmd = dynamic_cast<QAction*>(sender());
710 if (aCmd->isCheckable() && aCmd->isChecked()) {
711 // 1. check whether the delete should be processed in the module
712 ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
713 bool isNestedOp = PartSet_SketcherMgr::isNestedCreateOperation(anOperation);
715 // in case if in the viewer nothing is displayed, the create operation should not be
716 // comitted even if all values of the feature are initialized
717 if (!mySketchMgr->canDisplayCurrentCreatedFeature()) {
718 // the action information should be saved before the operation is aborted
719 // because this abort leads to update command status, which unchecks this action
720 anOperation->abort();
721 launchOperation(aCmd->data().toString());
725 ModuleBase_IModule::onFeatureTriggered();
728 void PartSet_Module::onObjectDisplayed(ObjectPtr theObject, AISObjectPtr theAIS)
730 Handle(AIS_InteractiveObject) anAIS = theAIS->impl<Handle(AIS_InteractiveObject)>();
731 if (!anAIS.IsNull()) {
732 Handle(AIS_InteractiveContext) aCtx = anAIS->GetContext();
733 Handle(AIS_Dimension) aDim = Handle(AIS_Dimension)::DownCast(anAIS);
734 if (!aDim.IsNull()) {
735 aCtx->SetZLayer(aDim, myVisualLayerId);
737 Handle(SketcherPrs_SymbolPrs) aCons = Handle(SketcherPrs_SymbolPrs)::DownCast(anAIS);
739 aCtx->SetZLayer(aCons, myVisualLayerId);
744 void PartSet_Module::onBeforeObjectErase(ObjectPtr theObject, AISObjectPtr theAIS)
746 // it should be recomputed in order to disappear in the viewer if the corresponded object
748 if (myCustomPrs->isActive())
749 myCustomPrs->customize(theObject);
752 void PartSet_Module::onViewTransformed(int theTrsfType)
754 // Set length of arrows constant in pixel size
755 // if the operation is panning or rotate or panglobal then do nothing
756 if ((theTrsfType == 1) || (theTrsfType == 3) || (theTrsfType == 4))
759 ModuleBase_IViewer* aViewer = myWorkshop->viewer();
760 //Handle(V3d_View) aView = aViewer->activeView();
762 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(myWorkshop);
763 XGUI_Workshop* aWorkshop = aConnector->workshop();
764 XGUI_Displayer* aDisplayer = aWorkshop->displayer();
765 Handle(AIS_InteractiveContext) aContext = aViewer->AISContext();
767 Handle(V3d_Viewer) aV3dViewer = aContext->CurrentViewer();
768 Handle(V3d_View) aView;
770 for (aV3dViewer->InitDefinedViews();
771 aV3dViewer->MoreDefinedViews();
772 aV3dViewer->NextDefinedViews()) {
773 Handle(V3d_View) aV = aV3dViewer->DefinedView();
774 double aS = aV->Scale();
782 double aLen = aView->Convert(20);
784 double aPrevLen = SketcherPrs_Tools::getArrowSize();
785 SketcherPrs_Tools::setArrowSize(aLen);
786 const double aPrevScale = aViewer->Scale(aViewer->activeView());
787 const double aCurScale = aViewer->activeView()->Camera()->Scale();
788 aViewer->SetScale(aViewer->activeView(), aCurScale);
789 SketcherPrs_Tools::setTextHeight (aCurScale / aPrevScale * SketcherPrs_Tools::getTextHeight());
790 bool isModified = false;
791 QList<AISObjectPtr> aPrsList = aDisplayer->displayedPresentations();
792 foreach (AISObjectPtr aAIS, aPrsList) {
793 Handle(AIS_InteractiveObject) aAisObj = aAIS->impl<Handle(AIS_InteractiveObject)>();
795 Handle(AIS_Dimension) aDim = Handle(AIS_Dimension)::DownCast(aAisObj);
796 if (!aDim.IsNull()) {
797 aDim->DimensionAspect()->ArrowAspect()->SetLength(aLen);
798 aContext->Redisplay(aDim, false);
803 aDisplayer->updateViewer();
806 void PartSet_Module::customizeObject(ObjectPtr theObject)
808 if (myCustomPrs->isActive())
809 myCustomPrs->customize(theObject);
812 void PartSet_Module::customizeObjectBrowser(QWidget* theObjectBrowser)
814 XGUI_ObjectsBrowser* aOB = dynamic_cast<XGUI_ObjectsBrowser*>(theObjectBrowser);
816 QLineEdit* aLabel = aOB->activeDocLabel();
817 QPalette aPalet = aLabel->palette();
818 aPalet.setColor(QPalette::Text, QColor(0, 72, 140));
819 aLabel->setPalette(aPalet);
820 aOB->treeView()->setExpandsOnDoubleClick(false);
821 #ifdef ModuleDataModel
822 connect(aOB->treeView(), SIGNAL(doubleClicked(const QModelIndex&)),
823 SLOT(onTreeViewDoubleClick(const QModelIndex&)));
824 connect(aOB, SIGNAL(headerMouseDblClicked(const QModelIndex&)),
825 SLOT(onTreeViewDoubleClick(const QModelIndex&)));
826 connect(aOB->treeView(), SIGNAL(doubleClicked(const QModelIndex&)),
827 myDataModel, SLOT(onMouseDoubleClick(const QModelIndex&)));
832 ObjectPtr PartSet_Module::findPresentedObject(const AISObjectPtr& theAIS) const
835 ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
837 /// If last line finished on vertex the lines creation sequence has to be break
838 ModuleBase_IPropertyPanel* aPanel = aOperation->propertyPanel();
839 ModuleBase_ModelWidget* anActiveWidget = aPanel->activeWidget();
840 // if there is an active widget, find the presented object in it
842 anActiveWidget = aPanel->preselectionWidget();
844 ModuleBase_WidgetValidated* aWidgetValidated = dynamic_cast<ModuleBase_WidgetValidated*>
846 if (aWidgetValidated)
847 anObject = aWidgetValidated->findPresentedObject(theAIS);
852 void PartSet_Module::addObjectBrowserMenu(QMenu* theMenu) const
854 QObjectPtrList aObjects = myWorkshop->selection()->selectedObjects();
855 int aSelected = aObjects.size();
856 SessionPtr aMgr = ModelAPI_Session::get();
857 if (aSelected == 1) {
858 bool hasResult = false;
859 bool hasFeature = false;
860 bool hasParameter = false;
861 bool hasSubFeature = false;
862 ModuleBase_Tools::checkObjects(aObjects, hasResult, hasFeature, hasParameter, hasSubFeature);
864 ObjectPtr aObject = aObjects.first();
866 ResultPartPtr aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aObject);
867 FeaturePtr aPartFeature = std::dynamic_pointer_cast<ModelAPI_Feature>(aObject);
868 bool isPart = aPart.get() ||
869 (aPartFeature.get() && (aPartFeature->getKind() == PartSetPlugin_Part::ID()));
871 DocumentPtr aPartDoc;
873 aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aPartFeature->firstResult());
875 if (aPart.get()) // this may be null is Part feature is disabled
876 aPartDoc = aPart->partDoc();
877 if (aMgr->activeDocument() == aPartDoc)
878 theMenu->addAction(myMenuMgr->action("DEACTIVATE_PART_CMD"));
880 theMenu->addAction(myMenuMgr->action("ACTIVATE_PART_CMD"));
881 } else if (aObject->document() == aMgr->activeDocument()) {
882 if (hasParameter || hasFeature)
883 theMenu->addAction(myMenuMgr->action("EDIT_CMD"));
886 ResultBodyPtr aResult = std::dynamic_pointer_cast<ModelAPI_ResultBody>(aObject);
889 theMenu->addAction(myMenuMgr->action("SELECT_PARENT_CMD"));
891 } else { // If feature is 0 the it means that selected root object (document)
892 if (aMgr->activeDocument() != aMgr->moduleDocument())
893 theMenu->addAction(myMenuMgr->action("ACTIVATE_PARTSET_CMD"));
895 } else if (aSelected == 0) {
896 // if there is no selection then it means that upper label is selected
897 QModelIndexList aIndexes = myWorkshop->selection()->selectedIndexes();
898 if (aIndexes.size() == 0) // it means that selection happens in top label outside of tree view
899 if (aMgr->activeDocument() != aMgr->moduleDocument())
900 theMenu->addAction(myMenuMgr->action("ACTIVATE_PARTSET_CMD"));
902 bool aCanDeactivate = (myWorkshop->currentOperation() == 0);
903 myMenuMgr->action("ACTIVATE_PARTSET_CMD")->setEnabled(aCanDeactivate);
904 myMenuMgr->action("DEACTIVATE_PART_CMD")->setEnabled(aCanDeactivate);
905 myMenuMgr->action("ACTIVATE_PART_CMD")->setEnabled(aCanDeactivate);
908 void PartSet_Module::processEvent(const std::shared_ptr<Events_Message>& theMessage)
910 if (theMessage->eventID() == Events_Loop::loop()->eventByName(EVENT_DOCUMENT_CHANGED)) {
911 // Do not change activation of parts if an operation active
912 static QStringList aAllowActivationList;
913 if (aAllowActivationList.isEmpty())
914 aAllowActivationList <<
915 QString(PartSetPlugin_Part::ID().c_str()) <<
916 QString(PartSetPlugin_Duplicate::ID().c_str()) <<
917 QString(PartSetPlugin_Remove::ID().c_str());
918 if (myWorkshop->currentOperation() &&
919 (!aAllowActivationList.contains(myWorkshop->currentOperation()->id())))
921 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(myWorkshop);
922 XGUI_Workshop* aWorkshop = aConnector->workshop();
923 XGUI_DataTree* aTreeView = aWorkshop->objectBrowser()->treeView();
924 QLineEdit* aLabel = aWorkshop->objectBrowser()->activeDocLabel();
925 QPalette aPalet = aLabel->palette();
927 SessionPtr aMgr = ModelAPI_Session::get();
928 DocumentPtr aActiveDoc = aMgr->activeDocument();
929 #ifdef ModuleDataModel
930 QModelIndex aOldIndex = myDataModel->activePartTree();
931 DocumentPtr aDoc = aMgr->moduleDocument();
932 if (aActiveDoc == aDoc) {
933 if (aOldIndex.isValid())
934 aTreeView->setExpanded(aOldIndex, false);
935 myDataModel->deactivatePart();
936 aPalet.setColor(QPalette::Text, QColor(0, 72, 140));
938 std::string aGrpName = ModelAPI_ResultPart::group();
939 for (int i = 0; i < aDoc->size(aGrpName); i++) {
940 ResultPartPtr aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aDoc->object(aGrpName, i));
941 if (aPart->partDoc() == aActiveDoc) {
942 QModelIndex aIndex = myDataModel->partIndex(aPart);
943 if (myDataModel->activatePart(aIndex)) {
944 if (aOldIndex.isValid())
945 aTreeView->setExpanded(aOldIndex, false);
946 aTreeView->setExpanded(myDataModel->activePartTree(), true);
947 aPalet.setColor(QPalette::Text, Qt::black);
954 // Problem with MPV: At first time on creation it doesn't work because Part feature
955 // creation event will be sent after
956 if (aActivePartIndex.isValid())
957 aTreeView->setExpanded(aActivePartIndex, false);
958 XGUI_DataModel* aDataModel = aWorkshop->objectBrowser()->dataModel();
959 aActivePartIndex = aDataModel->documentRootIndex(aActiveDoc);
960 if (aActivePartIndex.isValid())
961 aTreeView->setExpanded(aActivePartIndex, true);
963 aLabel->setPalette(aPalet);
964 aWorkshop->updateCommandStatus();
966 // Update displayed objects in order to update active color
967 XGUI_Displayer* aDisplayer = aWorkshop->displayer();
968 QObjectPtrList aObjects = aDisplayer->displayedObjects();
969 foreach(ObjectPtr aObj, aObjects)
970 aDisplayer->redisplay(aObj, false);
971 aDisplayer->updateViewer();
975 void PartSet_Module::onTreeViewDoubleClick(const QModelIndex& theIndex)
977 if (myWorkshop->currentOperation()) // Do not change activation of parts if an operation active
979 SessionPtr aMgr = ModelAPI_Session::get();
980 if (!theIndex.isValid()) {
981 aMgr->setActiveDocument(aMgr->moduleDocument());
984 if (theIndex.column() != 0) // Use only first column
986 ObjectPtr aObj = myDataModel->object(theIndex);
987 ResultPartPtr aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aObj);
988 if (!aPart.get()) { // Probably this is Feature
989 FeaturePtr aPartFeature = std::dynamic_pointer_cast<ModelAPI_Feature>(aObj);
990 if (aPartFeature.get() && (aPartFeature->getKind() == PartSetPlugin_Part::ID())) {
991 aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aPartFeature->firstResult());
994 if (aPart.get()) { // if this is a part
995 if (aPart->partDoc() == aMgr->activeDocument()) {
996 aMgr->setActiveDocument(aMgr->moduleDocument());
1004 void PartSet_Module::onViewCreated(ModuleBase_IViewWindow*)
1006 // z layer is created for all started operations in order to visualize operation AIS presentation
1008 Handle(V3d_Viewer) aViewer = myWorkshop->viewer()->AISContext()->CurrentViewer();
1009 if (myVisualLayerId == 0) {
1010 if (myVisualLayerId == 0)
1011 aViewer->AddZLayer(myVisualLayerId);
1013 TColStd_SequenceOfInteger aZList;
1014 aViewer->GetAllZLayers(aZList);
1015 bool aFound = false;
1016 for (int i = 1; i <= aZList.Length(); i++) {
1017 if (aZList(i) == myVisualLayerId) {
1023 aViewer->AddZLayer(myVisualLayerId);