1 // Copyright (C) 2014-20xx CEA/DEN, EDF R&D
3 #include "PartSet_Module.h"
4 #include "PartSet_WidgetSketchLabel.h"
5 #include "PartSet_Validators.h"
6 #include "PartSet_Tools.h"
7 #include "PartSet_PreviewPlanes.h"
8 #include "PartSet_WidgetPoint2d.h"
9 #include "PartSet_WidgetPoint2dDistance.h"
10 #include "PartSet_WidgetPoint2DFlyout.h"
11 #include "PartSet_WidgetShapeSelector.h"
12 #include "PartSet_WidgetMultiSelector.h"
13 #include "PartSet_WidgetEditor.h"
14 #include "PartSet_WidgetFileSelector.h"
15 #include "PartSet_WidgetSketchCreator.h"
16 #include "PartSet_SketcherMgr.h"
17 #include "PartSet_SketcherReetntrantMgr.h"
18 #include "PartSet_ResultSketchPrs.h"
19 #include "PartSet_MenuMgr.h"
20 #include "PartSet_CustomPrs.h"
21 #include "PartSet_IconFactory.h"
22 #include "PartSet_WidgetChoice.h"
23 #include "PartSet_OverconstraintListener.h"
25 #include "PartSet_Filters.h"
26 #include "PartSet_FilterInfinite.h"
28 #include <PartSetPlugin_Remove.h>
29 #include <PartSetPlugin_Part.h>
30 #include <PartSetPlugin_Duplicate.h>
32 #include <ModuleBase_Operation.h>
33 #include <ModuleBase_OperationAction.h>
34 #include <ModuleBase_IViewer.h>
35 #include <ModuleBase_IViewWindow.h>
36 #include <ModuleBase_IPropertyPanel.h>
37 #include <ModuleBase_WidgetEditor.h>
38 #include <ModuleBase_WidgetValidated.h>
39 #include <ModuleBase_FilterFactory.h>
40 #include <ModuleBase_Tools.h>
41 #include <ModuleBase_OperationFeature.h>
42 #include <ModuleBase_WidgetFactory.h>
43 #include <ModuleBase_OperationDescription.h>
44 #include <ModuleBase_ViewerPrs.h>
46 #include <ModelAPI_Object.h>
47 #include <ModelAPI_Events.h>
48 #include <ModelAPI_Validator.h>
49 #include <ModelAPI_Data.h>
50 #include <ModelAPI_Session.h>
51 #include <ModelAPI_ResultBody.h>
52 #include <ModelAPI_AttributeString.h>
53 #include <ModelAPI_AttributeSelectionList.h>
55 #include <GeomDataAPI_Point2D.h>
56 #include <GeomDataAPI_Point.h>
57 #include <GeomDataAPI_Dir.h>
59 #include <XGUI_Displayer.h>
60 #include <XGUI_Workshop.h>
61 #include <XGUI_OperationMgr.h>
62 #include <XGUI_PropertyPanel.h>
63 #include <XGUI_ModuleConnector.h>
64 #include <XGUI_ContextMenuMgr.h>
65 #include <XGUI_Tools.h>
66 #include <XGUI_ObjectsBrowser.h>
67 #include <XGUI_SelectionMgr.h>
68 #include <XGUI_DataModel.h>
69 #include <XGUI_ErrorMgr.h>
70 #include <XGUI_CustomPrs.h>
71 #include <XGUI_SelectionMgr.h>
73 #include <SketchPlugin_Feature.h>
74 #include <SketchPlugin_Sketch.h>
75 #include <SketchPlugin_ConstraintAngle.h>
76 #include <SketchPlugin_ConstraintLength.h>
77 #include <SketchPlugin_ConstraintDistance.h>
78 #include <SketchPlugin_ConstraintParallel.h>
79 #include <SketchPlugin_ConstraintPerpendicular.h>
80 #include <SketchPlugin_ConstraintRadius.h>
82 #include <SketcherPrs_SymbolPrs.h>
83 #include <SketcherPrs_Coincident.h>
84 #include <SketcherPrs_Tools.h>
86 #include <Events_Loop.h>
87 #include <Config_PropManager.h>
88 #include <Config_Keywords.h>
90 #include <StdSelect_TypeOfFace.hxx>
91 #include <TopoDS_Vertex.hxx>
93 #include <TopoDS_Shape.hxx>
94 #include <BRep_Tool.hxx>
95 #include <AIS_Dimension.hxx>
98 #include <QMouseEvent>
101 #include <QApplication>
102 #include <QMessageBox>
103 #include <QMainWindow>
107 #include <GeomAlgoAPI_FaceBuilder.h>
108 #include <GeomDataAPI_Dir.h>
110 #include <SelectMgr_ListIteratorOfListOfFilter.hxx>
116 /*!Create and return new instance of XGUI_Module*/
117 extern "C" PARTSET_EXPORT ModuleBase_IModule* createModule(ModuleBase_IWorkshop* theWshop)
119 return new PartSet_Module(theWshop);
122 PartSet_Module::PartSet_Module(ModuleBase_IWorkshop* theWshop)
123 : ModuleBase_IModule(theWshop),
126 new PartSet_IconFactory();
128 mySketchMgr = new PartSet_SketcherMgr(this);
129 mySketchReentrantMgr = new PartSet_SketcherReetntrantMgr(theWshop);
131 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(theWshop);
132 XGUI_Workshop* aWorkshop = aConnector->workshop();
134 ModuleBase_IViewer* aViewer = theWshop->viewer();
135 connect(aViewer, SIGNAL(keyRelease(ModuleBase_IViewWindow*, QKeyEvent*)),
136 this, SLOT(onKeyRelease(ModuleBase_IViewWindow*, QKeyEvent*)));
137 connect(aViewer, SIGNAL(viewTransformed(int)),
138 SLOT(onViewTransformed(int)));
139 connect(aViewer, SIGNAL(viewCreated(ModuleBase_IViewWindow*)),
140 SLOT(onViewCreated(ModuleBase_IViewWindow*)));
141 myMenuMgr = new PartSet_MenuMgr(this);
142 myCustomPrs = new PartSet_CustomPrs(theWshop);
144 myOverconstraintListener = new PartSet_OverconstraintListener(theWshop);
146 Events_Loop* aLoop = Events_Loop::loop();
147 aLoop->registerListener(this, Events_Loop::eventByName(EVENT_DOCUMENT_CHANGED));
149 mySelectionFilters.Append(new PartSet_GlobalFilter(myWorkshop));
150 mySelectionFilters.Append(new PartSet_FilterInfinite(myWorkshop));
152 setDefaultConstraintShown();
154 Config_PropManager::registerProp("Visualization", "operation_parameter_color",
155 "Reference shape wireframe color in operation", Config_Prop::Color,
156 PartSet_CustomPrs::OPERATION_PARAMETER_COLOR());
157 Config_PropManager::registerProp("Visualization", "operation_result_color",
158 "Result shape wireframe color in operation", Config_Prop::Color,
159 PartSet_CustomPrs::OPERATION_RESULT_COLOR());
160 Config_PropManager::registerProp("Visualization", "operation_highlight_color",
161 "Multi selector item color in operation", Config_Prop::Color,
162 PartSet_CustomPrs::OPERATION_HIGHLIGHT_COLOR());
165 PartSet_Module::~PartSet_Module()
167 SelectMgr_ListIteratorOfListOfFilter aIt(mySelectionFilters);
168 for (; aIt.More(); aIt.Next()) {
169 Handle(SelectMgr_Filter) aFilter = aIt.Value();
170 if (!aFilter.IsNull())
174 delete myOverconstraintListener;
177 void PartSet_Module::activateSelectionFilters()
179 SelectMgr_ListIteratorOfListOfFilter aIt(mySelectionFilters);
180 for (; aIt.More(); aIt.Next()) {
181 Handle(SelectMgr_Filter) aFilter = aIt.Value();
182 if (!aFilter.IsNull())
183 myWorkshop->viewer()->addSelectionFilter(aFilter);
187 void PartSet_Module::deactivateSelectionFilters()
189 SelectMgr_ListIteratorOfListOfFilter aIt(mySelectionFilters);
190 for (; aIt.More(); aIt.Next()) {
191 Handle(SelectMgr_Filter) aFilter = aIt.Value();
192 if (!aFilter.IsNull())
193 myWorkshop->viewer()->removeSelectionFilter(aFilter);
197 void PartSet_Module::storeSelection()
199 sketchMgr()->storeSelection();
202 void PartSet_Module::restoreSelection()
204 sketchMgr()->restoreSelection();
207 void PartSet_Module::registerValidators()
209 //Registering of validators
210 SessionPtr aMgr = ModelAPI_Session::get();
211 ModelAPI_ValidatorsFactory* aFactory = aMgr->validators();
212 aFactory->registerValidator("PartSet_DistanceSelection", new PartSet_DistanceSelection);
213 aFactory->registerValidator("PartSet_LengthSelection", new PartSet_LengthSelection);
214 aFactory->registerValidator("PartSet_PerpendicularSelection", new PartSet_PerpendicularSelection);
215 aFactory->registerValidator("PartSet_ParallelSelection", new PartSet_ParallelSelection);
216 aFactory->registerValidator("PartSet_RadiusSelection", new PartSet_RadiusSelection);
217 aFactory->registerValidator("PartSet_RigidSelection", new PartSet_RigidSelection);
218 aFactory->registerValidator("PartSet_CoincidentSelection", new PartSet_CoincidentSelection);
219 aFactory->registerValidator("PartSet_HVDirSelection", new PartSet_HVDirSelection);
220 aFactory->registerValidator("PartSet_TangentSelection", new PartSet_TangentSelection);
221 aFactory->registerValidator("PartSet_FilletSelection", new PartSet_FilletSelection);
222 aFactory->registerValidator("PartSet_AngleSelection", new PartSet_AngleSelection);
223 aFactory->registerValidator("PartSet_EqualSelection", new PartSet_EqualSelection);
224 aFactory->registerValidator("PartSet_CollinearSelection", new PartSet_CollinearSelection);
225 aFactory->registerValidator("PartSet_MiddlePointSelection", new PartSet_MiddlePointSelection);
226 aFactory->registerValidator("PartSet_DifferentObjects", new PartSet_DifferentObjectsValidator);
227 aFactory->registerValidator("PartSet_CoincidentAttr", new PartSet_CoincidentAttr);
230 void PartSet_Module::registerFilters()
232 //Registering of selection filters
233 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
234 ModuleBase_FilterFactory* aFactory = aConnector->selectionFilters();
237 void PartSet_Module::registerProperties()
239 Config_PropManager::registerProp("Sketch planes", "planes_size", "Size", Config_Prop::Double,
241 Config_PropManager::registerProp("Sketch planes", "planes_thickness", "Thickness",
242 Config_Prop::Integer, SKETCH_WIDTH);
243 Config_PropManager::registerProp("Sketch planes", "rotate_to_plane", "Rotate to plane when selected",
244 Config_Prop::Boolean, "false");
247 void PartSet_Module::connectToPropertyPanel(ModuleBase_ModelWidget* theWidget, const bool isToConnect)
249 mySketchMgr->connectToPropertyPanel(theWidget, isToConnect);
252 void PartSet_Module::operationCommitted(ModuleBase_Operation* theOperation)
254 if (PartSet_SketcherMgr::isNestedSketchOperation(theOperation)) {
255 mySketchMgr->commitNestedSketch(theOperation);
258 /// Restart sketcher operations automatically
259 if (!mySketchReentrantMgr->operationCommitted(theOperation)) {
261 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>(theOperation);
262 if (aFOperation && !aFOperation->isEditOperation()) {
263 // the selection is cleared after commit the create operation
264 // in order to do not use the same selected objects in the restarted operation
265 // for common behaviour, the selection is cleared even if the operation is not restarted
266 getWorkshop()->selector()->clearSelection();
271 void PartSet_Module::operationAborted(ModuleBase_Operation* theOperation)
273 /// Restart sketcher operations automatically
274 mySketchReentrantMgr->operationAborted(theOperation);
277 void PartSet_Module::operationStarted(ModuleBase_Operation* theOperation)
279 ModuleBase_IWorkshop* anIWorkshop = workshop();
280 if (!theOperation->getDescription()->hasXmlRepresentation()) { //!< No need for property panel
281 anIWorkshop->updateCommandStatus();
284 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>
287 XGUI_Workshop* aWorkshop = XGUI_Tools::workshop(anIWorkshop);
288 XGUI_PropertyPanel* aPropertyPanel = aWorkshop->propertyPanel();
289 ModuleBase_ModelWidget* aFilledWidget = 0;
290 bool aPostonedWidgetActivation = false;
291 FeaturePtr aFeature = aFOperation->feature();
293 std::string aGreedAttributeId = ModuleBase_Tools::findGreedAttribute(anIWorkshop, aFeature);
294 // if there is a greed attribute, automatic commit by preselection for this feature is prohibited
295 aWorkshop->setPropertyPanel(aFOperation);
297 // filling the operation values by the current selection
298 // if the operation can be committed after the controls filling, the method perform should
299 // be stopped. Otherwise unnecessary presentations can be shown(e.g. operation prs in sketch)
300 bool isOperationCommitted = false;
301 if (!aFOperation->isEditOperation()) {
302 aFilledWidget = aFOperation->activateByPreselection(aGreedAttributeId);
303 if (currentOperation() != aFOperation)
304 isOperationCommitted = true;
306 if (aGreedAttributeId.empty()) {
307 // a signal should be emitted before the next widget activation
308 // because, the activation of the next widget will give a focus to the widget. As a result
309 // the value of the widget is initialized. And commit may happens until the value is entered.
311 if (mySketchReentrantMgr->canBeCommittedByPreselection())
312 isOperationCommitted = mySketchMgr->operationActivatedByPreselection();
313 // activate the next obligatory widget
314 if (!isOperationCommitted)
315 aPropertyPanel->activateNextWidget(aFilledWidget);
318 else { // there is a greed widget
319 const QList<ModuleBase_ModelWidget*>& aWidgets = aPropertyPanel->modelWidgets();
320 std::string aFirstAttributeId = aWidgets.front()->attributeID();
321 // activate next widget after greeded if it is the first widget in the panel
322 // else the first panel widget is already activated by operation start
323 if (aFirstAttributeId == aGreedAttributeId)
324 aPostonedWidgetActivation = true;
327 } if (!isOperationCommitted) {
328 anIWorkshop->updateCommandStatus();
329 aWorkshop->connectToPropertyPanel(true);
330 operationStartedInternal(aFOperation);
332 // the objects of the current operation should be deactivated
333 QObjectPtrList anObjects;
334 anObjects.append(aFeature);
335 std::list<ResultPtr> aResults = aFeature->results();
336 std::list<ResultPtr>::const_iterator aIt;
337 for (aIt = aResults.begin(); aIt != aResults.end(); ++aIt) {
338 anObjects.append(*aIt);
340 QObjectPtrList::const_iterator anIt = anObjects.begin(), aLast = anObjects.end();
341 for (; anIt != aLast; anIt++)
342 aWorkshop->deactivateActiveObject(*anIt, false);
343 if (anObjects.size() > 0) {
344 XGUI_Displayer* aDisplayer = aWorkshop->displayer();
345 aDisplayer->updateViewer();
348 if (aPostonedWidgetActivation) {
349 // if the widget is an empty in the chain of activated widgets, the current operation
350 // is restarted. It should be performed after functionality of the operation starting
351 aPropertyPanel->activateNextWidget(aFilledWidget);
357 void PartSet_Module::operationStartedInternal(ModuleBase_Operation* theOperation)
359 /// Restart sketcher operations automatically
360 mySketchReentrantMgr->operationStarted(theOperation);
362 if (PartSet_SketcherMgr::isSketchOperation(theOperation)) {
363 mySketchMgr->startSketch(theOperation);
365 else if (PartSet_SketcherMgr::isNestedSketchOperation(theOperation)) {
366 mySketchMgr->startNestedSketch(theOperation);
369 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>(theOperation);
371 myCustomPrs->activate(aFOperation->feature(), ModuleBase_IModule::CustomizeArguments, true);
372 myCustomPrs->activate(aFOperation->feature(), ModuleBase_IModule::CustomizeResults, true);
376 void PartSet_Module::operationResumed(ModuleBase_Operation* theOperation)
378 ModuleBase_IModule::operationResumed(theOperation);
380 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>(theOperation);
382 myCustomPrs->activate(aFOperation->feature(), ModuleBase_IModule::CustomizeArguments, true);
383 myCustomPrs->activate(aFOperation->feature(), ModuleBase_IModule::CustomizeResults, true);
387 void PartSet_Module::operationStopped(ModuleBase_Operation* theOperation)
389 bool isModifiedArgs = myCustomPrs->deactivate(ModuleBase_IModule::CustomizeArguments, false);
390 bool isModifiedResults = myCustomPrs->deactivate(ModuleBase_IModule::CustomizeResults, false);
391 bool isModified = isModifiedArgs || isModifiedResults;
393 if (PartSet_SketcherMgr::isNestedSketchOperation(theOperation)) {
394 mySketchMgr->stopNestedSketch(theOperation);
396 else if (PartSet_SketcherMgr::isSketchOperation(theOperation))
397 setDefaultConstraintShown();
399 //VSV: Viewer is updated on feature update and redisplay
401 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(myWorkshop);
402 XGUI_Displayer* aDisplayer = aConnector->workshop()->displayer();
403 aDisplayer->updateViewer();
406 QMap<PartSet_Tools::ConstraintVisibleState, bool>::const_iterator anIt = myHasConstraintShown.begin(),
407 aLast = myHasConstraintShown.end();
408 for (; anIt != aLast; anIt++) {
409 mySketchMgr->updateBySketchParameters(anIt.key(), anIt.value());
413 ModuleBase_Operation* PartSet_Module::currentOperation() const
415 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
416 XGUI_OperationMgr* anOpMgr = aConnector->workshop()->operationMgr();
417 return anOpMgr->currentOperation();
420 bool PartSet_Module::canUndo() const
422 bool aCanUndo = false;
423 SessionPtr aMgr = ModelAPI_Session::get();
424 if (aMgr->hasModuleDocument() && aMgr->canUndo()) {
425 aCanUndo = !aMgr->isOperation();
426 if (!aCanUndo) // check the enable state additionally by sketch manager
427 aCanUndo = aMgr->canUndo();
432 bool PartSet_Module::canRedo() const
434 bool aCanRedo = false;
435 SessionPtr aMgr = ModelAPI_Session::get();
436 if (aMgr->hasModuleDocument() && aMgr->canRedo()) {
437 aCanRedo = !aMgr->isOperation();
438 if (!aCanRedo) // check the enable state additionally by sketch manager
439 aCanRedo = aMgr->canRedo();
444 bool PartSet_Module::canApplyAction(const ObjectPtr& theObject, const QString& theActionId) const
447 if (theActionId == "MOVE_CMD") {
448 FeaturePtr aFeature = ModelAPI_Feature::feature(theObject);
450 ResultPtr aResult = ModuleBase_Tools::firstResult(aFeature);
451 // part features can not be moved in the history.
452 if (aResult.get() && aResult->groupName() == ModelAPI_ResultPart::group())
459 bool PartSet_Module::canEraseObject(const ObjectPtr& theObject) const
461 // the sketch manager put the restriction to the objects erase
462 return mySketchMgr->canEraseObject(theObject);
465 bool PartSet_Module::canDisplayObject(const ObjectPtr& theObject) const
467 // the sketch manager put the restriction to the objects display
468 return mySketchMgr->canDisplayObject(theObject);
471 /*void PartSet_Module::processHiddenObject(const std::list<ObjectPtr>& theObjects)
473 mySketchMgr->processHiddenObject(theObjects);
476 bool PartSet_Module::canActivateSelection(const ObjectPtr& theObject) const
478 bool aCanActivate = ModuleBase_IModule::canActivateSelection(theObject);
480 ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
481 bool isSketchOp = PartSet_SketcherMgr::isSketchOperation(anOperation),
482 isNestedOp = PartSet_SketcherMgr::isNestedSketchOperation(anOperation);
483 if (isSketchOp || isNestedOp) {
484 // in active sketch operation it is possible to activate operation object in selection
485 // in the edit operation, e.g. points of the line can be moved when the line is edited
486 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>(anOperation);
487 aCanActivate = aCanActivate || (aFOperation && aFOperation->isEditOperation());
492 bool PartSet_Module::addViewerMenu(const QMap<QString, QAction*>& theStdActions,
494 QMap<int, QAction*>& theMenuActions) const
496 return myMenuMgr->addViewerMenu(theStdActions, theParent, theMenuActions);
499 void PartSet_Module::updateViewerMenu(const QMap<QString, QAction*>& theStdActions)
501 myMenuMgr->updateViewerMenu(theStdActions);
504 QString PartSet_Module::getFeatureError(const FeaturePtr& theFeature)
506 QString anError = ModuleBase_IModule::getFeatureError(theFeature);
507 if (anError.isEmpty())
508 anError = sketchMgr()->getFeatureError(theFeature);
513 void PartSet_Module::grantedOperationIds(ModuleBase_Operation* theOperation,
514 QStringList& theIds) const
516 myMenuMgr->grantedOperationIds(theOperation, theIds);
518 if (PartSet_SketcherMgr::isSketchOperation(theOperation)) {
519 XGUI_Workshop* aWorkshop = getWorkshop();
520 theIds.append(aWorkshop->contextMenuMgr()->action("DELETE_CMD")->text());
524 void PartSet_Module::activeSelectionModes(QIntList& theModes)
527 if (mySketchMgr->activeSketch().get())
528 PartSet_SketcherMgr::sketchSelectionModes(theModes);
531 void PartSet_Module::customSubShapesSelectionModes(QIntList& theTypes)
533 if (theTypes.contains(TopAbs_FACE))
534 theTypes.append(SketcherPrs_Tools::Sel_Sketch_Face);
535 if (theTypes.contains(TopAbs_WIRE))
536 theTypes.append(SketcherPrs_Tools::Sel_Sketch_Wire);
539 bool PartSet_Module::isMouseOverWindow()
541 return mySketchMgr->isMouseOverWindow();
544 void PartSet_Module::closeDocument()
549 void PartSet_Module::clearViewer()
551 myCustomPrs->clearPrs();
553 XGUI_Workshop* aWorkshop = getWorkshop();
554 XGUI_Displayer* aDisplayer = aWorkshop->displayer();
555 aDisplayer->deactivateSelectionFilters();
558 void PartSet_Module::propertyPanelDefined(ModuleBase_Operation* theOperation)
560 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>(theOperation);
564 ModuleBase_IPropertyPanel* aPanel = aFOperation->propertyPanel();
565 // we have to manually activate the sketch label in edit mode
566 if (PartSet_SketcherMgr::isSketchOperation(aFOperation) && (aFOperation->isEditOperation()))
567 aPanel->activateWidget(aPanel->modelWidgets().first());
570 bool PartSet_Module::createWidgets(ModuleBase_Operation* theOperation,
571 QList<ModuleBase_ModelWidget*>& theWidgets) const
573 bool aProcessed = false;
575 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>(theOperation);
576 XGUI_Workshop* aWorkshop = getWorkshop();
577 XGUI_PropertyPanel* aPropertyPanel = aWorkshop->propertyPanel();
578 if (mySketchMgr->activeSketch().get() && aFOperation && aPropertyPanel) {
579 ModuleBase_ISelection* aSelection = workshop()->selection();
580 // click on a point in sketch leads here with the point is highlighted, not yet selected
581 QList<ModuleBase_ViewerPrsPtr> aPreselection = aSelection->getHighlighted();
582 if (aPreselection.size() == 1) {
583 ModuleBase_ViewerPrsPtr aSelectedPrs = aPreselection[0];
584 ObjectPtr anObject = aSelectedPrs->object();
586 FeaturePtr aFeature = ModelAPI_Feature::feature(anObject);
587 FeaturePtr anOpFeature = aFOperation->feature();
588 GeomShapePtr aShape = aSelectedPrs->shape();
589 // click on the digit of dimension constrain comes here with an empty shape, so we need the check
590 if (aFeature == anOpFeature && aShape.get() && !aShape->isNull()) {
591 const TopoDS_Shape& aTDShape = aShape->impl<TopoDS_Shape>();
592 AttributePtr anAttribute = PartSet_Tools::findAttributeBy2dPoint(anObject, aTDShape,
593 mySketchMgr->activeSketch());
594 if (anAttribute.get()) {
595 QString aXmlRepr = aFOperation->getDescription()->xmlRepresentation();
596 ModuleBase_WidgetFactory aFactory(aXmlRepr.toStdString(), workshop());
598 const std::string anAttributeId = anAttribute->id();
599 aFactory.createWidget(aPropertyPanel->contentWidget(), anAttributeId);
601 theWidgets = aFactory.getModelWidgets();
602 // it is possible that the point does not present in XML definition,
603 // in this case, we assume that it is not processed by this module
604 // e.g. "Intersection point" feature
605 aProcessed = !theWidgets.isEmpty();
613 void PartSet_Module::onSelectionChanged()
615 ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
619 bool isSketcherOp = false;
620 // An edit operation is enable only if the current opeation is the sketch operation
621 if (mySketchMgr->activeSketch()) {
622 if (PartSet_Tools::sketchPlane(mySketchMgr->activeSketch()))
623 isSketcherOp = PartSet_SketcherMgr::isSketchOperation(aOperation);
626 // Editing of constraints can be done on selection
627 ModuleBase_ISelection* aSelect = myWorkshop->selection();
628 QList<ModuleBase_ViewerPrsPtr> aSelected = aSelect->getSelected();
629 if (aSelected.size() == 1) {
630 ModuleBase_ViewerPrsPtr aPrs = aSelected.first();
631 ObjectPtr aObject = aPrs->object();
632 FeaturePtr aFeature = ModelAPI_Feature::feature(aObject);
634 std::string aId = aFeature->getKind();
635 if ((aId == SketchPlugin_ConstraintRadius::ID()) ||
636 (aId == SketchPlugin_ConstraintLength::ID()) ||
637 (aId == SketchPlugin_ConstraintDistance::ID()) ||
638 (aId == SketchPlugin_ConstraintAngle::ID())) {
639 editFeature(aFeature);
646 void PartSet_Module::onKeyRelease(ModuleBase_IViewWindow* theWnd, QKeyEvent* theEvent)
648 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
649 XGUI_OperationMgr* anOpMgr = aConnector->workshop()->operationMgr();
650 anOpMgr->onKeyReleased(theWnd->viewPort(), theEvent);
653 ModuleBase_ModelWidget* PartSet_Module::createWidgetByType(const std::string& theType,
655 Config_WidgetAPI* theWidgetApi)
657 ModuleBase_IWorkshop* aWorkshop = workshop();
658 XGUI_Workshop* aXUIWorkshop = getWorkshop();
659 ModuleBase_ModelWidget* aWgt = NULL;
660 if (theType == "sketch-start-label") {
661 PartSet_WidgetSketchLabel* aLabelWgt = new PartSet_WidgetSketchLabel(theParent, aWorkshop,
662 theWidgetApi, myHasConstraintShown);
663 connect(aLabelWgt, SIGNAL(planeSelected(const std::shared_ptr<GeomAPI_Pln>&)),
664 mySketchMgr, SLOT(onPlaneSelected(const std::shared_ptr<GeomAPI_Pln>&)));
665 connect(aLabelWgt, SIGNAL(showConstraintToggled(int, bool)),
666 mySketchMgr, SLOT(onShowConstraintsToggle(int, bool)));
668 } else if (theType == "sketch-2dpoint_selector") {
669 PartSet_WidgetPoint2D* aPointWgt = new PartSet_WidgetPoint2D(theParent, aWorkshop,
671 aPointWgt->setSketch(mySketchMgr->activeSketch());
672 connect(aPointWgt, SIGNAL(vertexSelected()), sketchReentranceMgr(), SLOT(onVertexSelected()));
674 }else if (theType == "sketch-2dpoint_flyout_selector") {
675 PartSet_WidgetPoint2DFlyout* aPointWgt = new PartSet_WidgetPoint2DFlyout(theParent, aWorkshop,
677 aPointWgt->setSketch(mySketchMgr->activeSketch());
678 connect(aPointWgt, SIGNAL(vertexSelected()), sketchReentranceMgr(), SLOT(onVertexSelected()));
680 } else if (theType == "point2ddistance") {
681 PartSet_WidgetPoint2dDistance* aDistanceWgt = new PartSet_WidgetPoint2dDistance(theParent,
682 aWorkshop, theWidgetApi);
683 aDistanceWgt->setSketch(mySketchMgr->activeSketch());
685 } else if (theType == "sketch_shape_selector") {
686 PartSet_WidgetShapeSelector* aShapeSelectorWgt =
687 new PartSet_WidgetShapeSelector(theParent, aWorkshop, theWidgetApi);
688 aShapeSelectorWgt->setSketcher(mySketchMgr->activeSketch());
689 aWgt = aShapeSelectorWgt;
690 } else if (theType == "sketch_multi_selector") {
691 PartSet_WidgetMultiSelector* aShapeSelectorWgt =
692 new PartSet_WidgetMultiSelector(theParent, aWorkshop, theWidgetApi);
693 aShapeSelectorWgt->setSketcher(mySketchMgr->activeSketch());
694 aWgt = aShapeSelectorWgt;
696 else if (theType == WDG_DOUBLEVALUE_EDITOR) {
697 aWgt = new PartSet_WidgetEditor(theParent, aWorkshop, theWidgetApi);
698 } else if (theType == "export_file_selector") {
699 aWgt = new PartSet_WidgetFileSelector(theParent, aWorkshop, theWidgetApi);
700 } else if (theType == "sketch_launcher") {
701 aWgt = new PartSet_WidgetSketchCreator(theParent, this, theWidgetApi);
702 } else if (theType == "module_choice") {
703 aWgt = new PartSet_WidgetChoice(theParent, theWidgetApi);
704 connect(aWgt, SIGNAL(itemSelected(ModuleBase_ModelWidget*, int)),
705 this, SLOT(onChoiceChanged(ModuleBase_ModelWidget*, int)));
710 ModuleBase_ModelWidget* PartSet_Module::activeWidget() const
712 ModuleBase_ModelWidget* anActiveWidget = 0;
714 anActiveWidget = mySketchReentrantMgr->internalActiveWidget();
715 if (!anActiveWidget) {
716 ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
718 ModuleBase_IPropertyPanel* aPanel = aOperation->propertyPanel();
719 anActiveWidget = aPanel->activeWidget();
722 return anActiveWidget;
725 bool PartSet_Module::deleteObjects()
727 bool isProcessed = false;
729 XGUI_Workshop* aWorkshop = getWorkshop();
730 XGUI_OperationMgr* anOpMgr = aWorkshop->operationMgr();
732 //SessionPtr aMgr = ModelAPI_Session::get();
733 // 1. check whether the delete should be processed in the module
734 ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
735 bool isSketchOp = PartSet_SketcherMgr::isSketchOperation(anOperation),
736 isNestedOp = PartSet_SketcherMgr::isNestedSketchOperation(anOperation);
737 if (isSketchOp || isNestedOp) {
739 // 2. find selected presentations
740 // selected objects should be collected before the current operation abort because
741 // the abort leads to selection lost on constraint objects. It can be corrected after #386 issue
742 ModuleBase_ISelection* aSel = workshop()->selection();
743 QObjectPtrList aSelectedObj = aSel->selectedPresentations();
744 // if there are no selected objects in the viewer, that means that the selection in another
745 // place cased this method. It is necessary to return the false value to understande in above
746 // method that delete is not processed
747 if (aSelectedObj.count() == 0)
750 // avoid delete of the objects, which are not belong to the current sketch
751 // in order to do not delete results of other sketches
752 QObjectPtrList aSketchObjects;
753 QObjectPtrList::const_iterator anIt = aSelectedObj.begin(), aLast = aSelectedObj.end();
754 for ( ; anIt != aLast; anIt++) {
755 ObjectPtr anObject = *anIt;
756 if (mySketchMgr->isObjectOfSketch(anObject)) {
757 // sketch feature should be used in this list because workshop deletes features only
758 // results are skipped
759 FeaturePtr aSketchFeature = ModelAPI_Feature::feature(anObject);
760 aSketchObjects.append(aSketchFeature);
763 // if the selection contains only local selected presentations from other sketches,
764 // the Delete operation should not be done at all
765 if (aSketchObjects.size() == 0)
768 // 3. start operation
769 QString aDescription = aWorkshop->contextMenuMgr()->action("DELETE_CMD")->text();
770 ModuleBase_OperationAction* anOpAction = new ModuleBase_OperationAction(aDescription, this);
772 // the active nested sketch operation should be aborted unconditionally
773 // the Delete action should be additionally granted for the Sketch operation
774 // in order to do not abort/commit it
775 if (!anOpMgr->canStartOperation(anOpAction->id()))
776 return true; // the objects are processed but can not be deleted
778 anOpMgr->startOperation(anOpAction);
780 // WORKAROUND, should be done to avoid viewer highlight update after deletetion of objects
781 // the problem is in AIS Dimensions recompute if a line and the dim are removed, line is the first
782 // it causes the AIS recompute, where the base line is null, the result is empty AIS in the viewer
783 XGUI_Tools::workshop(myWorkshop)->selector()->clearSelection();
785 // 4. delete features
786 // sketch feature should be skipped, only sub-features can be removed
787 // when sketch operation is active
788 aWorkshop->deleteFeatures(aSketchObjects);
790 anOpMgr->commitOperation();
795 void PartSet_Module::onFeatureTriggered()
797 QAction* aCmd = dynamic_cast<QAction*>(sender());
798 if (aCmd->isCheckable() && aCmd->isChecked()) {
799 // 1. check whether the delete should be processed in the module
800 ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
801 bool isNestedOp = PartSet_SketcherMgr::isNestedCreateOperation(anOperation);
803 // in case if in the viewer nothing is displayed, the create operation should not be
804 // comitted even if all values of the feature are initialized
805 if (!mySketchMgr->canDisplayCurrentCreatedFeature()) {
806 // the action information should be saved before the operation is aborted
807 // because this abort leads to update command status, which unchecks this action
808 anOperation->abort();
809 launchOperation(aCmd->data().toString());
813 ModuleBase_IModule::onFeatureTriggered();
816 void PartSet_Module::editFeature(FeaturePtr theFeature)
818 storeConstraintsState(theFeature->getKind());
819 ModuleBase_IModule::editFeature(theFeature);
822 bool PartSet_Module::canCommitOperation() const
827 void PartSet_Module::launchOperation(const QString& theCmdId)
829 storeConstraintsState(theCmdId.toStdString());
830 updateConstraintsState(theCmdId.toStdString());
832 ModuleBase_IModule::launchOperation(theCmdId);
835 void PartSet_Module::storeConstraintsState(const std::string& theFeatureKind)
837 if (myWorkshop->currentOperation() &&
838 myWorkshop->currentOperation()->id().toStdString() == SketchPlugin_Sketch::ID()) {
839 const QMap<PartSet_Tools::ConstraintVisibleState, bool>& aShownStates =
840 mySketchMgr->showConstraintStates();
841 myHasConstraintShown = aShownStates;
845 void PartSet_Module::updateConstraintsState(const std::string& theFeatureKind)
847 if (PartSet_SketcherMgr::constraintsIdList().contains(theFeatureKind.c_str())) {
848 // Show constraints if a constraint was anOperation
849 mySketchMgr->updateBySketchParameters(PartSet_Tools::Geometrical, true);
850 mySketchMgr->updateBySketchParameters(PartSet_Tools::Dimensional, true);
851 mySketchMgr->updateBySketchParameters(PartSet_Tools::Expressions,
852 myHasConstraintShown[PartSet_Tools::Expressions]);
856 void PartSet_Module::onObjectDisplayed(ObjectPtr theObject, AISObjectPtr theAIS)
858 Handle(AIS_InteractiveObject) anAIS = theAIS->impl<Handle(AIS_InteractiveObject)>();
859 if (!anAIS.IsNull()) {
860 Handle(AIS_InteractiveContext) aCtx = anAIS->GetContext();
861 Handle(AIS_Dimension) aDim = Handle(AIS_Dimension)::DownCast(anAIS);
862 if (!aDim.IsNull()) {
863 aCtx->SetZLayer(aDim, myVisualLayerId);
865 Handle(SketcherPrs_SymbolPrs) aCons = Handle(SketcherPrs_SymbolPrs)::DownCast(anAIS);
867 aCtx->SetZLayer(aCons, myVisualLayerId);
872 void PartSet_Module::onBeforeObjectErase(ObjectPtr theObject, AISObjectPtr theAIS)
875 // it should be recomputed in order to disappear in the viewer if the corresponded object
877 //if (myCustomPrs->isActive())
878 // myCustomPrs->redisplay(theObject, false);
881 void PartSet_Module::onViewTransformed(int theTrsfType)
883 // Set length of arrows constant in pixel size
884 // if the operation is panning or rotate or panglobal then do nothing
885 if ((theTrsfType == 1) || (theTrsfType == 3) || (theTrsfType == 4))
887 ModuleBase_IViewer* aViewer = myWorkshop->viewer();
888 Handle(AIS_InteractiveContext) aContext = aViewer->AISContext();
889 if (aContext.IsNull())
892 //Handle(V3d_View) aView = aViewer->activeView();
894 XGUI_Workshop* aWorkshop = getWorkshop();
895 XGUI_Displayer* aDisplayer = aWorkshop->displayer();
896 Handle(V3d_Viewer) aV3dViewer = aContext->CurrentViewer();
897 Handle(V3d_View) aView;
899 for (aV3dViewer->InitDefinedViews();
900 aV3dViewer->MoreDefinedViews();
901 aV3dViewer->NextDefinedViews()) {
902 Handle(V3d_View) aV = aV3dViewer->DefinedView();
903 double aS = aV->Scale();
911 double aLen = aView->Convert(SketcherPrs_Tools::getDefaultArrowSize());
913 double aPrevLen = SketcherPrs_Tools::getArrowSize();
914 SketcherPrs_Tools::setArrowSize(aLen);
915 const double aPrevScale = aViewer->Scale(aViewer->activeView());
916 const double aCurScale = aViewer->activeView()->Camera()->Scale();
917 aViewer->SetScale(aViewer->activeView(), aCurScale);
918 SketcherPrs_Tools::setTextHeight (aCurScale / aPrevScale * SketcherPrs_Tools::getTextHeight());
919 bool isModified = false;
920 QList<AISObjectPtr> aPrsList = aDisplayer->displayedPresentations();
921 foreach (AISObjectPtr aAIS, aPrsList) {
922 Handle(AIS_InteractiveObject) aAisObj = aAIS->impl<Handle(AIS_InteractiveObject)>();
924 Handle(AIS_Dimension) aDim = Handle(AIS_Dimension)::DownCast(aAisObj);
925 if (!aDim.IsNull()) {
926 aDim->DimensionAspect()->ArrowAspect()->SetLength(aLen);
927 aContext->Redisplay(aDim, false);
932 aDisplayer->updateViewer();
935 void PartSet_Module::activateCustomPrs(const FeaturePtr& theFeature, const ModuleBase_CustomizeFlag& theFlag,
936 const bool theUpdateViewer)
938 myCustomPrs->activate(theFeature, theFlag, theUpdateViewer);
941 void PartSet_Module::deactivateCustomPrs(const ModuleBase_CustomizeFlag& theFlag,
942 const bool theUpdateViewer)
944 myCustomPrs->deactivate(theFlag, theUpdateViewer);
947 bool PartSet_Module::customisePresentation(ResultPtr theResult, AISObjectPtr thePrs,
948 std::shared_ptr<GeomAPI_ICustomPrs> theCustomPrs)
950 bool aCustomized = false;
955 XGUI_Workshop* aWorkshop = getWorkshop();
956 XGUI_Displayer* aDisplayer = aWorkshop->displayer();
957 ObjectPtr anObject = aDisplayer->getObject(thePrs);
958 if (anObject.get()) {
959 bool isConflicting = myOverconstraintListener->isConflictingObject(anObject);
960 // customize sketch symbol presentation
962 Handle(AIS_InteractiveObject) anAISIO = thePrs->impl<Handle(AIS_InteractiveObject)>();
963 if (!anAISIO.IsNull()) {
964 if (!Handle(SketcherPrs_SymbolPrs)::DownCast(anAISIO).IsNull()) {
965 Handle(SketcherPrs_SymbolPrs) aPrs = Handle(SketcherPrs_SymbolPrs)::DownCast(anAISIO);
966 if (!aPrs.IsNull()) {
967 std::vector<int> aColor;
968 myOverconstraintListener->getConflictingColor(aColor);
969 aPrs->SetConflictingConstraint(isConflicting, aColor);
972 } else if (!Handle(SketcherPrs_Coincident)::DownCast(anAISIO).IsNull()) {
973 Handle(SketcherPrs_Coincident) aPrs = Handle(SketcherPrs_Coincident)::DownCast(anAISIO);
974 if (!aPrs.IsNull()) {
975 std::vector<int> aColor;
976 myOverconstraintListener->getConflictingColor(aColor);
977 aPrs->SetConflictingConstraint(isConflicting, aColor);
983 // customize sketch dimension constraint presentation
985 std::vector<int> aColor;
987 myOverconstraintListener->getConflictingColor(aColor);
990 XGUI_CustomPrs::getDefaultColor(anObject, true, aColor);
991 if (!aColor.empty()) {
992 aCustomized = thePrs->setColor(aColor[0], aColor[1], aColor[2]);
996 // customize dimentional constrains
997 sketchMgr()->customizePresentation(anObject);
1003 bool PartSet_Module::customizeObject(ObjectPtr theObject, const ModuleBase_CustomizeFlag& theFlag,
1004 const bool theUpdateViewer)
1006 bool isRedisplayed = false;
1007 if (myCustomPrs->isActive(theFlag))
1008 isRedisplayed = myCustomPrs->redisplay(theObject, theFlag, theUpdateViewer);
1010 return isRedisplayed;
1013 void PartSet_Module::customizeObjectBrowser(QWidget* theObjectBrowser)
1015 XGUI_ObjectsBrowser* aOB = dynamic_cast<XGUI_ObjectsBrowser*>(theObjectBrowser);
1017 QLabel* aLabel = aOB->activeDocLabel();
1018 aLabel->installEventFilter(myMenuMgr);
1019 connect(aLabel, SIGNAL(customContextMenuRequested(const QPoint&)),
1020 SLOT(onActiveDocPopup(const QPoint&)));
1021 //QPalette aPalet = aLabel->palette();
1022 //aPalet.setColor(QPalette::Text, QColor(0, 72, 140));
1023 //aLabel->setPalette(aPalet);
1024 aOB->treeView()->setExpandsOnDoubleClick(false);
1025 connect(aOB->treeView(), SIGNAL(doubleClicked(const QModelIndex&)),
1026 SLOT(onTreeViewDoubleClick(const QModelIndex&)));
1030 void PartSet_Module::onActiveDocPopup(const QPoint& thePnt)
1032 SessionPtr aMgr = ModelAPI_Session::get();
1033 QAction* aActivatePartAction = myMenuMgr->action("ACTIVATE_PARTSET_CMD");
1035 XGUI_Workshop* aWorkshop = getWorkshop();
1036 QLabel* aHeader = aWorkshop->objectBrowser()->activeDocLabel();
1038 aActivatePartAction->setEnabled((aMgr->activeDocument() != aMgr->moduleDocument()));
1041 aMenu.addAction(aActivatePartAction);
1042 aMenu.exec(aHeader->mapToGlobal(thePnt));
1045 Handle(AIS_InteractiveObject) PartSet_Module::createPresentation(const ResultPtr& theResult)
1047 return mySketchMgr->createPresentation(theResult);
1051 ObjectPtr PartSet_Module::findPresentedObject(const AISObjectPtr& theAIS) const
1054 ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
1056 /// If last line finished on vertex the lines creation sequence has to be break
1057 ModuleBase_IPropertyPanel* aPanel = aOperation->propertyPanel();
1059 ModuleBase_ModelWidget* anActiveWidget = aPanel->activeWidget();
1060 // if there is an active widget, find the presented object in it
1061 if (!anActiveWidget)
1062 anActiveWidget = aPanel->preselectionWidget();
1064 ModuleBase_WidgetValidated* aWidgetValidated = dynamic_cast<ModuleBase_WidgetValidated*>
1066 if (aWidgetValidated)
1067 anObject = aWidgetValidated->findPresentedObject(theAIS);
1073 bool PartSet_Module::canBeShaded(Handle(AIS_InteractiveObject) theAIS) const
1075 bool aCanBeShaged = true;
1077 Handle(PartSet_ResultSketchPrs) aPrs = Handle(PartSet_ResultSketchPrs)::DownCast(theAIS);
1079 aCanBeShaged = false;
1081 return aCanBeShaged;
1084 void PartSet_Module::addObjectBrowserMenu(QMenu* theMenu) const
1086 QObjectPtrList aObjects = myWorkshop->selection()->selectedObjects();
1087 int aSelected = aObjects.size();
1088 SessionPtr aMgr = ModelAPI_Session::get();
1089 QAction* aActivatePartAction = myMenuMgr->action("ACTIVATE_PART_CMD");
1091 ModuleBase_Operation* aCurrentOp = myWorkshop->currentOperation();
1092 if (aSelected == 1) {
1093 bool hasResult = false;
1094 bool hasFeature = false;
1095 bool hasParameter = false;
1096 bool hasCompositeOwner = false;
1097 ModuleBase_Tools::checkObjects(aObjects, hasResult, hasFeature, hasParameter,
1099 ObjectPtr aObject = aObjects.first();
1101 ResultPartPtr aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aObject);
1102 FeaturePtr aFeature = std::dynamic_pointer_cast<ModelAPI_Feature>(aObject);
1103 bool isPart = aPart.get() ||
1104 (aFeature.get() && (aFeature->getKind() == PartSetPlugin_Part::ID()));
1106 DocumentPtr aPartDoc;
1108 aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aFeature->firstResult());
1110 if (aPart.get()) // this may be null is Part feature is disabled
1111 aPartDoc = aPart->partDoc();
1113 theMenu->addAction(aActivatePartAction);
1114 aActivatePartAction->setEnabled((aMgr->activeDocument() != aPartDoc));
1116 } else if (aObject->document() == aMgr->activeDocument()) {
1117 if (hasParameter || hasFeature) {
1118 myMenuMgr->action("EDIT_CMD")->setEnabled(true);
1119 theMenu->addAction(myMenuMgr->action("EDIT_CMD"));
1120 if (aCurrentOp && aFeature.get()) {
1121 if (aCurrentOp->id().toStdString() == aFeature->getKind())
1122 myMenuMgr->action("EDIT_CMD")->setEnabled(false);
1127 ResultBodyPtr aResult = std::dynamic_pointer_cast<ModelAPI_ResultBody>(aObject);
1129 theMenu->addAction(myMenuMgr->action("SELECT_PARENT_CMD"));
1132 bool aNotDeactivate = (aCurrentOp == 0);
1133 if (!aNotDeactivate) {
1134 aActivatePartAction->setEnabled(false);
1138 void PartSet_Module::processEvent(const std::shared_ptr<Events_Message>& theMessage)
1140 if (theMessage->eventID() == Events_Loop::loop()->eventByName(EVENT_DOCUMENT_CHANGED)) {
1141 // Do not change activation of parts if an operation active
1142 static QStringList aAllowActivationList;
1143 if (aAllowActivationList.isEmpty())
1144 aAllowActivationList <<
1145 QString(PartSetPlugin_Part::ID().c_str()) <<
1146 QString(PartSetPlugin_Duplicate::ID().c_str()) <<
1147 QString(PartSetPlugin_Remove::ID().c_str());
1148 if (myWorkshop->currentOperation() &&
1149 (!aAllowActivationList.contains(myWorkshop->currentOperation()->id())))
1151 XGUI_Workshop* aWorkshop = getWorkshop();
1152 XGUI_DataTree* aTreeView = aWorkshop->objectBrowser()->treeView();
1153 QLabel* aLabel = aWorkshop->objectBrowser()->activeDocLabel();
1154 QPalette aPalet = aLabel->palette();
1156 SessionPtr aMgr = ModelAPI_Session::get();
1157 DocumentPtr aActiveDoc = aMgr->activeDocument();
1158 if (aActivePartIndex.isValid())
1159 aTreeView->setExpanded(aActivePartIndex, false);
1160 XGUI_DataModel* aDataModel = aWorkshop->objectBrowser()->dataModel();
1161 aActivePartIndex = aDataModel->documentRootIndex(aActiveDoc);
1162 if (aActivePartIndex.isValid())
1163 aTreeView->setExpanded(aActivePartIndex, true);
1165 aLabel->setPalette(aPalet);
1166 aWorkshop->updateCommandStatus();
1168 // Update displayed objects in order to update active color
1169 XGUI_Displayer* aDisplayer = aWorkshop->displayer();
1170 QObjectPtrList aObjects = aDisplayer->displayedObjects();
1172 foreach(ObjectPtr aObj, aObjects) {
1173 //TODO: replace by redisplay event.
1174 aHidden = !aObj->data() || !aObj->data()->isValid() ||
1175 aObj->isDisabled() || (!aObj->isDisplayed());
1177 aDisplayer->redisplay(aObj, false);
1179 aDisplayer->updateViewer();
1183 void PartSet_Module::onTreeViewDoubleClick(const QModelIndex& theIndex)
1185 if (myWorkshop->currentOperation()) // Do not change activation of parts if an operation active
1187 SessionPtr aMgr = ModelAPI_Session::get();
1188 if (!theIndex.isValid()) {
1189 aMgr->setActiveDocument(aMgr->moduleDocument());
1192 if (theIndex.column() != 0) // Use only first column
1195 XGUI_Workshop* aWorkshop = getWorkshop();
1196 XGUI_DataModel* aDataModel = aWorkshop->objectBrowser()->dataModel();
1197 // De not use non editable Indexes
1198 if ((aDataModel->flags(theIndex) & Qt::ItemIsSelectable) == 0)
1200 ObjectPtr aObj = aDataModel->object(theIndex);
1202 ResultPartPtr aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aObj);
1203 if (!aPart.get()) { // Probably this is Feature
1204 FeaturePtr aPartFeature = std::dynamic_pointer_cast<ModelAPI_Feature>(aObj);
1205 if (aPartFeature.get() && (aPartFeature->getKind() == PartSetPlugin_Part::ID())) {
1206 aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aPartFeature->firstResult());
1209 if (aPart.get()) { // if this is a part
1210 if (aPart->partDoc() == aMgr->activeDocument()) {
1211 myMenuMgr->activatePartSet();
1219 void PartSet_Module::onViewCreated(ModuleBase_IViewWindow*)
1221 // z layer is created for all started operations in order to visualize operation AIS presentation
1223 Handle(AIS_InteractiveContext) aContext = myWorkshop->viewer()->AISContext();
1224 if (aContext.IsNull())
1227 Handle(V3d_Viewer) aViewer = aContext->CurrentViewer();
1228 if (myVisualLayerId == 0) {
1229 if (myVisualLayerId == 0)
1230 aViewer->AddZLayer(myVisualLayerId);
1232 TColStd_SequenceOfInteger aZList;
1233 aViewer->GetAllZLayers(aZList);
1234 bool aFound = false;
1235 for (int i = 1; i <= aZList.Length(); i++) {
1236 if (aZList(i) == myVisualLayerId) {
1242 aViewer->AddZLayer(myVisualLayerId);
1244 // if there is an active operation with validated widget,
1245 // the filters of this widget should be activated in the created view
1246 ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
1248 ModuleBase_ModelWidget* anActiveWidget = activeWidget();
1249 if (anActiveWidget) {
1250 ModuleBase_WidgetSelector* aWSelector = dynamic_cast<ModuleBase_WidgetSelector*>(anActiveWidget);
1252 aWSelector->activateSelectionAndFilters(true);
1257 //******************************************************
1258 void PartSet_Module::widgetStateChanged(int thePreviousState)
1260 mySketchMgr->widgetStateChanged(thePreviousState);
1263 bool PartSet_Module::processEnter(const std::string& thePreviousAttributeID)
1265 return mySketchReentrantMgr->processEnter(thePreviousAttributeID);
1268 //******************************************************
1269 void PartSet_Module::beforeOperationStarted(ModuleBase_Operation* theOperation)
1273 //******************************************************
1274 void PartSet_Module::beforeOperationStopped(ModuleBase_Operation* theOperation)
1276 if (PartSet_SketcherMgr::isSketchOperation(theOperation)) {
1277 mySketchMgr->stopSketch(theOperation);
1281 //******************************************************
1282 GeomShapePtr PartSet_Module::findShape(const AttributePtr& theAttribute)
1284 GeomShapePtr aGeomShape;
1286 ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
1287 if (anOperation && PartSet_SketcherMgr::isNestedSketchOperation(anOperation)) {
1288 aGeomShape = PartSet_Tools::findShapeBy2DPoint(theAttribute, myWorkshop);
1293 //******************************************************
1294 AttributePtr PartSet_Module::findAttribute(const ObjectPtr& theObject,
1295 const GeomShapePtr& theGeomShape)
1297 AttributePtr anAttribute;
1298 GeomShapePtr aGeomShape = theGeomShape;
1299 if (!aGeomShape.get()) {
1300 // processing shape of result, e.g. sketch circle center is selected, this is a result
1301 // the geom shape is empty, the shape of result should be used
1302 ResultPtr aResult = std::dynamic_pointer_cast<ModelAPI_Result>(theObject);
1303 if (aResult.get()) {
1304 aGeomShape = aResult->shape();
1308 if (aGeomShape.get()) {
1309 TopoDS_Shape aTDSShape = aGeomShape->impl<TopoDS_Shape>();
1310 return PartSet_Tools::findAttributeBy2dPoint(theObject, aTDSShape,
1311 mySketchMgr->activeSketch());
1316 //******************************************************
1317 void PartSet_Module::onChoiceChanged(ModuleBase_ModelWidget* theWidget,
1320 PartSet_WidgetChoice* aChoiceWidget = dynamic_cast<PartSet_WidgetChoice*>(theWidget);
1324 QString aChoiceTitle = aChoiceWidget->getPropertyPanelTitle(theIndex);
1325 if (!aChoiceTitle.isEmpty()) {
1326 ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
1329 ModuleBase_IPropertyPanel* aPanel = aOperation->propertyPanel();
1331 aPanel->setWindowTitle(aChoiceTitle);
1335 //******************************************************
1336 XGUI_Workshop* PartSet_Module::getWorkshop() const
1338 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
1339 return aConnector->workshop();
1342 //******************************************************
1343 void PartSet_Module::setDefaultConstraintShown()
1345 myHasConstraintShown[PartSet_Tools::Geometrical] = true;
1346 myHasConstraintShown[PartSet_Tools::Dimensional] = true;
1347 myHasConstraintShown[PartSet_Tools::Expressions] = false;