1 // Copyright (C) 2014-20xx CEA/DEN, EDF R&D
3 #include "PartSet_Module.h"
4 #include "PartSet_WidgetSketchLabel.h"
5 #include "PartSet_Validators.h"
6 #include "PartSet_Tools.h"
7 #include "PartSet_WidgetPoint2d.h"
8 #include "PartSet_WidgetPoint2dDistance.h"
9 #include "PartSet_WidgetShapeSelector.h"
10 #include "PartSet_WidgetPoint2dAngle.h"
11 #include "PartSet_WidgetMultiSelector.h"
12 #include "PartSet_WidgetEditor.h"
13 #include "PartSet_WidgetFileSelector.h"
14 #include "PartSet_WidgetSketchCreator.h"
15 #include "PartSet_SketcherMgr.h"
16 #include "PartSet_MenuMgr.h"
17 #include "PartSet_CustomPrs.h"
18 #include "PartSet_IconFactory.h"
20 #include "PartSet_Filters.h"
21 #include "PartSet_FilterInfinite.h"
23 #include <PartSetPlugin_Remove.h>
24 #include <PartSetPlugin_Part.h>
25 #include <PartSetPlugin_Duplicate.h>
27 #include <ModuleBase_Operation.h>
28 #include <ModuleBase_OperationAction.h>
29 #include <ModuleBase_IViewer.h>
30 #include <ModuleBase_IViewWindow.h>
31 #include <ModuleBase_IPropertyPanel.h>
32 #include <ModuleBase_WidgetEditor.h>
33 #include <ModuleBase_WidgetValidated.h>
34 #include <ModuleBase_FilterFactory.h>
35 #include <ModuleBase_Tools.h>
36 #include <ModuleBase_OperationFeature.h>
38 #include <GeomValidators_ShapeType.h>
39 #include <GeomValidators_Finite.h>
40 #include <GeomValidators_Face.h>
41 #include <GeomValidators_ConstructionComposite.h>
42 #include <GeomValidators_ZeroOffset.h>
43 #include <GeomValidators_BooleanArguments.h>
44 #include <GeomValidators_Different.h>
47 #include <ModelAPI_Object.h>
48 #include <ModelAPI_Events.h>
49 #include <ModelAPI_Validator.h>
50 #include <ModelAPI_Data.h>
51 #include <ModelAPI_Session.h>
52 #include <ModelAPI_ShapeValidator.h>
53 #include <ModelAPI_ResultBody.h>
55 #include <GeomDataAPI_Point2D.h>
56 #include <GeomDataAPI_Point.h>
57 #include <GeomDataAPI_Dir.h>
59 #include <XGUI_Displayer.h>
60 #include <XGUI_Workshop.h>
61 #include <XGUI_OperationMgr.h>
62 #include <XGUI_PropertyPanel.h>
63 #include <XGUI_ModuleConnector.h>
64 #include <XGUI_ContextMenuMgr.h>
65 #include <XGUI_Tools.h>
66 #include <XGUI_ObjectsBrowser.h>
67 #include <XGUI_SelectionMgr.h>
68 #include <XGUI_DataModel.h>
70 #include <SketchPlugin_Feature.h>
71 #include <SketchPlugin_Sketch.h>
72 #include <SketchPlugin_Line.h>
73 #include <SketchPlugin_Arc.h>
74 #include <SketchPlugin_Circle.h>
75 #include <SketchPlugin_Point.h>
76 #include <SketchPlugin_ConstraintAngle.h>
77 #include <SketchPlugin_ConstraintLength.h>
78 #include <SketchPlugin_ConstraintDistance.h>
79 #include <SketchPlugin_ConstraintParallel.h>
80 #include <SketchPlugin_ConstraintPerpendicular.h>
81 #include <SketchPlugin_ConstraintRadius.h>
83 #include <SketcherPrs_SymbolPrs.h>
84 #include <SketcherPrs_Tools.h>
86 #include <Events_Loop.h>
87 #include <Config_PropManager.h>
88 #include <Config_Keywords.h>
90 #include <StdSelect_TypeOfFace.hxx>
91 #include <TopoDS_Vertex.hxx>
93 #include <TopoDS_Shape.hxx>
94 #include <BRep_Tool.hxx>
95 #include <AIS_Dimension.hxx>
98 #include <QMouseEvent>
101 #include <QApplication>
102 #include <QMessageBox>
103 #include <QMainWindow>
106 #include <GeomAlgoAPI_FaceBuilder.h>
107 #include <GeomDataAPI_Dir.h>
109 #include <SelectMgr_ListIteratorOfListOfFilter.hxx>
115 /*!Create and return new instance of XGUI_Module*/
116 extern "C" PARTSET_EXPORT ModuleBase_IModule* createModule(ModuleBase_IWorkshop* theWshop)
118 return new PartSet_Module(theWshop);
121 PartSet_Module::PartSet_Module(ModuleBase_IWorkshop* theWshop)
122 : ModuleBase_IModule(theWshop),
123 myRestartingMode(RM_None), myVisualLayerId(0)
125 new PartSet_IconFactory();
127 mySketchMgr = new PartSet_SketcherMgr(this);
128 myDataModel = new PartSet_DocumentDataModel(this);
130 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(theWshop);
131 XGUI_Workshop* aWorkshop = aConnector->workshop();
133 XGUI_OperationMgr* anOpMgr = aWorkshop->operationMgr();
134 connect(anOpMgr, SIGNAL(keyEnterReleased()), this, SLOT(onEnterReleased()));
135 connect(anOpMgr, SIGNAL(operationActivatedByPreselection()),
136 this, SLOT(onOperationActivatedByPreselection()));
138 ModuleBase_IViewer* aViewer = theWshop->viewer();
139 connect(aViewer, SIGNAL(keyRelease(ModuleBase_IViewWindow*, QKeyEvent*)),
140 this, SLOT(onKeyRelease(ModuleBase_IViewWindow*, QKeyEvent*)));
141 connect(aViewer, SIGNAL(viewTransformed(int)),
142 SLOT(onViewTransformed(int)));
143 connect(aViewer, SIGNAL(viewCreated(ModuleBase_IViewWindow*)),
144 SLOT(onViewCreated(ModuleBase_IViewWindow*)));
146 myMenuMgr = new PartSet_MenuMgr(this);
147 myCustomPrs = new PartSet_CustomPrs(theWshop);
149 Events_Loop* aLoop = Events_Loop::loop();
150 aLoop->registerListener(this, Events_Loop::eventByName(EVENT_DOCUMENT_CHANGED));
152 mySelectionFilters.Append(new PartSet_GlobalFilter(myWorkshop));
153 mySelectionFilters.Append(new PartSet_FilterInfinite(myWorkshop));
156 PartSet_Module::~PartSet_Module()
158 SelectMgr_ListIteratorOfListOfFilter aIt(mySelectionFilters);
159 for (; aIt.More(); aIt.Next()) {
160 Handle(SelectMgr_Filter) aFilter = aIt.Value();
161 if (!aFilter.IsNull())
167 void PartSet_Module::activateSelectionFilters()
169 SelectMgr_ListIteratorOfListOfFilter aIt(mySelectionFilters);
170 for (; aIt.More(); aIt.Next()) {
171 Handle(SelectMgr_Filter) aFilter = aIt.Value();
172 if (!aFilter.IsNull())
173 myWorkshop->viewer()->addSelectionFilter(aFilter);
177 void PartSet_Module::deactivateSelectionFilters()
179 SelectMgr_ListIteratorOfListOfFilter aIt(mySelectionFilters);
180 for (; aIt.More(); aIt.Next()) {
181 Handle(SelectMgr_Filter) aFilter = aIt.Value();
182 if (!aFilter.IsNull())
183 myWorkshop->viewer()->removeSelectionFilter(aFilter);
187 void PartSet_Module::registerValidators()
189 //Registering of validators
190 SessionPtr aMgr = ModelAPI_Session::get();
191 ModelAPI_ValidatorsFactory* aFactory = aMgr->validators();
192 aFactory->registerValidator("PartSet_DistanceSelection", new PartSet_DistanceSelection);
193 aFactory->registerValidator("PartSet_LengthSelection", new PartSet_LengthSelection);
194 aFactory->registerValidator("PartSet_PerpendicularSelection", new PartSet_PerpendicularSelection);
195 aFactory->registerValidator("PartSet_ParallelSelection", new PartSet_ParallelSelection);
196 aFactory->registerValidator("PartSet_RadiusSelection", new PartSet_RadiusSelection);
197 aFactory->registerValidator("PartSet_RigidSelection", new PartSet_RigidSelection);
198 aFactory->registerValidator("PartSet_CoincidentSelection", new PartSet_CoincidentSelection);
199 aFactory->registerValidator("PartSet_HVDirSelection", new PartSet_HVDirSelection);
200 aFactory->registerValidator("PartSet_TangentSelection", new PartSet_TangentSelection);
201 aFactory->registerValidator("PartSet_FilletSelection", new PartSet_FilletSelection);
202 aFactory->registerValidator("PartSet_AngleSelection", new PartSet_AngleSelection);
204 aFactory->registerValidator("PartSet_DifferentObjects", new PartSet_DifferentObjectsValidator);
205 aFactory->registerValidator("PartSet_DifferentShapes", new ModelAPI_ShapeValidator);
207 aFactory->registerValidator("PartSet_CoincidentAttr", new PartSet_CoincidentAttr);
209 aFactory->registerValidator("GeomValidators_ShapeType", new GeomValidators_ShapeType);
210 aFactory->registerValidator("GeomValidators_Face", new GeomValidators_Face);
212 aFactory->registerValidator("GeomValidators_Finite", new GeomValidators_Finite);
214 aFactory->registerValidator("GeomValidators_ConstructionComposite",
215 new GeomValidators_ConstructionComposite);
217 aFactory->registerValidator("GeomValidators_ZeroOffset",
218 new GeomValidators_ZeroOffset);
220 aFactory->registerValidator("GeomValidators_BooleanArguments",
221 new GeomValidators_BooleanArguments);
223 aFactory->registerValidator("PartSet_SketchEntityValidator",
224 new PartSet_SketchEntityValidator);
226 aFactory->registerValidator("PartSet_SameTypeAttr",
227 new PartSet_SameTypeAttrValidator);
229 aFactory->registerValidator("GeomValidators_Different",
230 new GeomValidators_Different);
233 void PartSet_Module::registerFilters()
235 //Registering of selection filters
236 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
237 ModuleBase_FilterFactory* aFactory = aConnector->selectionFilters();
240 void PartSet_Module::registerProperties()
242 Config_PropManager::registerProp("Sketch planes", "planes_size", "Size", Config_Prop::Double,
244 Config_PropManager::registerProp("Sketch planes", "planes_thickness", "Thickness",
245 Config_Prop::Integer, SKETCH_WIDTH);
248 void PartSet_Module::onOperationCommitted(ModuleBase_Operation* theOperation)
250 if (PartSet_SketcherMgr::isNestedSketchOperation(theOperation)) {
251 mySketchMgr->commitNestedSketch(theOperation);
254 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>(theOperation);
255 if (!aFOperation || aFOperation->isEditOperation())
257 // the selection is cleared after commit the create operation
258 // in order to do not use the same selected objects in the restarted operation
259 // for common behaviour, the selection is cleared even if the operation is not restarted
260 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
261 XGUI_Workshop* aWorkshop = aConnector->workshop();
262 aWorkshop->selector()->clearSelection();
264 /// Restart sketcher operations automatically
265 FeaturePtr aFeature = aFOperation->feature();
266 std::shared_ptr<SketchPlugin_Feature> aSPFeature =
267 std::dynamic_pointer_cast<SketchPlugin_Feature>(aFeature);
268 if (aSPFeature && (myRestartingMode == RM_LastFeatureUsed ||
269 myRestartingMode == RM_EmptyFeatureUsed)) {
270 myLastOperationId = aFOperation->id();
271 myLastFeature = myRestartingMode == RM_LastFeatureUsed ? aFOperation->feature() : FeaturePtr();
273 launchOperation(myLastOperationId);
275 breakOperationSequence();
278 void PartSet_Module::breakOperationSequence()
280 myLastOperationId = "";
281 myLastFeature = FeaturePtr();
282 myRestartingMode = RM_None;
285 void PartSet_Module::onOperationAborted(ModuleBase_Operation* theOperation)
287 breakOperationSequence();
290 void PartSet_Module::onOperationStarted(ModuleBase_Operation* theOperation)
292 if (PartSet_SketcherMgr::isSketchOperation(theOperation)) {
293 mySketchMgr->startSketch(theOperation);
295 else if (PartSet_SketcherMgr::isNestedSketchOperation(theOperation)) {
296 mySketchMgr->startNestedSketch(theOperation);
299 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>(theOperation);
301 myCustomPrs->activate(aFOperation->feature(), true);
304 void PartSet_Module::onOperationResumed(ModuleBase_Operation* theOperation)
306 ModuleBase_IModule::onOperationResumed(theOperation);
308 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>(theOperation);
310 myCustomPrs->activate(aFOperation->feature(), true);
313 void PartSet_Module::onOperationStopped(ModuleBase_Operation* theOperation)
315 bool isModified = myCustomPrs->deactivate(false);
317 if (PartSet_SketcherMgr::isSketchOperation(theOperation)) {
318 mySketchMgr->stopSketch(theOperation);
320 else if (PartSet_SketcherMgr::isNestedSketchOperation(theOperation)) {
321 mySketchMgr->stopNestedSketch(theOperation);
325 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(myWorkshop);
326 XGUI_Displayer* aDisplayer = aConnector->workshop()->displayer();
327 aDisplayer->updateViewer();
331 ModuleBase_Operation* PartSet_Module::currentOperation() const
333 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
334 XGUI_OperationMgr* anOpMgr = aConnector->workshop()->operationMgr();
335 return anOpMgr->currentOperation();
338 bool PartSet_Module::canUndo() const
340 bool aCanUndo = false;
341 SessionPtr aMgr = ModelAPI_Session::get();
342 if (aMgr->hasModuleDocument() && aMgr->canUndo()) {
343 aCanUndo = !aMgr->isOperation();
344 if (!aCanUndo) // check the enable state additionally by sketch manager
345 aCanUndo = aMgr->canUndo();
350 bool PartSet_Module::canRedo() const
352 bool aCanRedo = false;
353 SessionPtr aMgr = ModelAPI_Session::get();
354 if (aMgr->hasModuleDocument() && aMgr->canRedo()) {
355 aCanRedo = !aMgr->isOperation();
356 if (!aCanRedo) // check the enable state additionally by sketch manager
357 aCanRedo = aMgr->canRedo();
362 bool PartSet_Module::canApplyAction(const ObjectPtr& theObject, const QString& theActionId) const
365 if (theActionId == "DELETE_CMD" || theActionId == "MOVE_CMD") {
366 FeaturePtr aFeature = ModelAPI_Feature::feature(theObject);
368 // part features are removed in the PartSet module only.
369 if (aFeature->getKind() == PartSetPlugin_Part::ID())
376 bool PartSet_Module::canCommitOperation() const
378 return mySketchMgr->canCommitOperation();
381 bool PartSet_Module::canEraseObject(const ObjectPtr& theObject) const
383 // the sketch manager put the restriction to the objects erase
384 return mySketchMgr->canEraseObject(theObject);
387 bool PartSet_Module::canDisplayObject(const ObjectPtr& theObject) const
389 // the sketch manager put the restriction to the objects display
390 return mySketchMgr->canDisplayObject(theObject);
393 bool PartSet_Module::canActivateSelection(const ObjectPtr& theObject) const
395 bool aCanActivate = ModuleBase_IModule::canActivateSelection(theObject);
397 ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
398 bool isSketchOp = PartSet_SketcherMgr::isSketchOperation(anOperation),
399 isNestedOp = PartSet_SketcherMgr::isNestedSketchOperation(anOperation);
400 if (isSketchOp || isNestedOp) {
401 // in active sketch operation it is possible to activate operation object in selection
402 // in the edit operation, e.g. points of the line can be moved when the line is edited
403 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>(anOperation);
404 aCanActivate = aCanActivate || (aFOperation && aFOperation->isEditOperation());
409 bool PartSet_Module::addViewerMenu(QMenu* theMenu, const QMap<QString, QAction*>& theStdActions) const
411 return myMenuMgr->addViewerMenu(theMenu, theStdActions);
414 void PartSet_Module::updateViewerMenu(const QMap<QString, QAction*>& theStdActions)
416 myMenuMgr->updateViewerMenu(theStdActions);
420 void PartSet_Module::activeSelectionModes(QIntList& theModes)
423 if (mySketchMgr->activeSketch().get())
424 PartSet_SketcherMgr::sketchSelectionModes(theModes);
427 bool PartSet_Module::isMouseOverWindow()
429 return mySketchMgr->isMouseOverWindow();
432 void PartSet_Module::closeDocument()
437 void PartSet_Module::clearViewer()
439 myCustomPrs->clearPrs();
442 void PartSet_Module::propertyPanelDefined(ModuleBase_Operation* theOperation)
444 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>(theOperation);
448 ModuleBase_IPropertyPanel* aPanel = aFOperation->propertyPanel();
449 if (PartSet_SketcherMgr::isSketchOperation(aFOperation) && (aFOperation->isEditOperation())) {
450 // we have to manually activate the sketch label in edit mode
451 aPanel->activateWidget(aPanel->modelWidgets().first());
455 // Restart last operation type
456 if ((aFOperation->id() == myLastOperationId) && myLastFeature) {
457 ModuleBase_ModelWidget* aWgt = aPanel->activeWidget();
458 if (aFOperation->id().toStdString() == SketchPlugin_Line::ID()) {
459 // Initialise new line with first point equal to end of previous
460 PartSet_WidgetPoint2D* aPnt2dWgt = dynamic_cast<PartSet_WidgetPoint2D*>(aWgt);
462 std::shared_ptr<ModelAPI_Data> aData = myLastFeature->data();
463 std::shared_ptr<GeomDataAPI_Point2D> aPoint =
464 std::dynamic_pointer_cast<GeomDataAPI_Point2D>(aData->attribute(SketchPlugin_Line::END_ID()));
466 aPnt2dWgt->setPoint(aPoint->x(), aPoint->y());
467 PartSet_Tools::setConstraints(mySketchMgr->activeSketch(), aFOperation->feature(),
468 aWgt->attributeID(), aPoint->x(), aPoint->y());
469 aPanel->activateNextWidget(aPnt2dWgt);
477 void PartSet_Module::onSelectionChanged()
479 ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
483 bool isSketcherOp = false;
484 // An edit operation is enable only if the current opeation is the sketch operation
485 if (mySketchMgr->activeSketch()) {
486 if (PartSet_Tools::sketchPlane(mySketchMgr->activeSketch()))
487 isSketcherOp = PartSet_SketcherMgr::isSketchOperation(aOperation);
490 // Editing of constraints can be done on selection
491 ModuleBase_ISelection* aSelect = myWorkshop->selection();
492 QList<ModuleBase_ViewerPrs> aSelected = aSelect->getSelected();
493 if (aSelected.size() == 1) {
494 ModuleBase_ViewerPrs aPrs = aSelected.first();
495 ObjectPtr aObject = aPrs.object();
496 FeaturePtr aFeature = ModelAPI_Feature::feature(aObject);
498 std::string aId = aFeature->getKind();
499 if ((aId == SketchPlugin_ConstraintRadius::ID()) ||
500 (aId == SketchPlugin_ConstraintLength::ID()) ||
501 (aId == SketchPlugin_ConstraintDistance::ID()) ||
502 (aId == SketchPlugin_ConstraintAngle::ID())) {
503 editFeature(aFeature);
510 void PartSet_Module::onKeyRelease(ModuleBase_IViewWindow* theWnd, QKeyEvent* theEvent)
512 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
513 XGUI_OperationMgr* anOpMgr = aConnector->workshop()->operationMgr();
514 anOpMgr->onKeyReleased(theEvent);
517 void PartSet_Module::onEnterReleased()
519 myRestartingMode = RM_EmptyFeatureUsed;
522 void PartSet_Module::onOperationActivatedByPreselection()
524 ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
525 if(anOperation && PartSet_SketcherMgr::isNestedSketchOperation(anOperation)) {
526 // Set final definitions if they are necessary
527 //propertyPanelDefined(aOperation);
529 /// Commit sketcher operations automatically
530 anOperation->commit();
534 void PartSet_Module::onNoMoreWidgets()
536 ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
538 if (PartSet_SketcherMgr::isNestedSketchOperation(anOperation)) {
539 if (myRestartingMode != RM_Forbided)
540 myRestartingMode = RM_LastFeatureUsed;
541 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
542 XGUI_Workshop* aWorkshop = aConnector->workshop();
543 XGUI_OperationMgr* anOpMgr = aWorkshop->operationMgr();
544 // do nothing if the feature can not be applyed
545 if (anOpMgr->isApplyEnabled())
546 anOperation->commit();
551 void PartSet_Module::onVertexSelected()
553 ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
554 if (aOperation->id().toStdString() == SketchPlugin_Line::ID()) {
555 /// If last line finished on vertex the lines creation sequence has to be break
556 ModuleBase_IPropertyPanel* aPanel = aOperation->propertyPanel();
557 ModuleBase_ModelWidget* anActiveWidget = aPanel->activeWidget();
558 const QList<ModuleBase_ModelWidget*>& aWidgets = aPanel->modelWidgets();
559 QList<ModuleBase_ModelWidget*>::const_iterator anIt = aWidgets.begin(), aLast = aWidgets.end();
560 bool aFoundWidget = false;
561 bool aFoundObligatory = false;
562 for (; anIt != aLast && !aFoundObligatory; anIt++) {
564 aFoundWidget = *anIt == anActiveWidget;
566 aFoundObligatory = (*anIt)->isObligatory();
568 if (!aFoundObligatory)
569 myRestartingMode = RM_Forbided;
573 ModuleBase_ModelWidget* PartSet_Module::createWidgetByType(const std::string& theType, QWidget* theParent,
574 Config_WidgetAPI* theWidgetApi, std::string theParentId)
576 ModuleBase_IWorkshop* aWorkshop = workshop();
577 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(aWorkshop);
578 XGUI_Workshop* aXUIWorkshop = aConnector->workshop();
579 ModuleBase_ModelWidget* aWgt = NULL;
580 if (theType == "sketch-start-label") {
581 PartSet_WidgetSketchLabel* aLabelWgt = new PartSet_WidgetSketchLabel(theParent, aWorkshop,
582 theWidgetApi, theParentId, mySketchMgr->isConstraintsShown());
583 connect(aLabelWgt, SIGNAL(planeSelected(const std::shared_ptr<GeomAPI_Pln>&)),
584 mySketchMgr, SLOT(onPlaneSelected(const std::shared_ptr<GeomAPI_Pln>&)));
585 connect(aLabelWgt, SIGNAL(showConstraintToggled(bool)),
586 mySketchMgr, SLOT(onShowConstraintsToggle(bool)));
588 } else if (theType == "sketch-2dpoint_selector") {
589 PartSet_WidgetPoint2D* aPointWgt = new PartSet_WidgetPoint2D(theParent, aWorkshop,
590 theWidgetApi, theParentId);
591 aPointWgt->setSketch(mySketchMgr->activeSketch());
592 connect(aPointWgt, SIGNAL(vertexSelected()), this, SLOT(onVertexSelected()));
594 } else if (theType == "point2ddistance") {
595 PartSet_WidgetPoint2dDistance* aDistanceWgt = new PartSet_WidgetPoint2dDistance(theParent,
596 aWorkshop, theWidgetApi, theParentId);
597 aDistanceWgt->setSketch(mySketchMgr->activeSketch());
599 } else if(theType == "point2dangle") {
600 PartSet_WidgetPoint2dAngle* anAngleWgt = new PartSet_WidgetPoint2dAngle(theParent,
601 aWorkshop, theWidgetApi, theParentId);
602 anAngleWgt->setSketch(mySketchMgr->activeSketch());
604 } else if (theType == "sketch_shape_selector") {
605 PartSet_WidgetShapeSelector* aShapeSelectorWgt =
606 new PartSet_WidgetShapeSelector(theParent, aWorkshop, theWidgetApi, theParentId);
607 aShapeSelectorWgt->setSketcher(mySketchMgr->activeSketch());
608 aWgt = aShapeSelectorWgt;
609 } else if (theType == "sketch_multi_selector") {
610 PartSet_WidgetMultiSelector* aShapeSelectorWgt =
611 new PartSet_WidgetMultiSelector(theParent, aWorkshop, theWidgetApi, theParentId);
612 aShapeSelectorWgt->setSketcher(mySketchMgr->activeSketch());
613 aWgt = aShapeSelectorWgt;
614 } else if (theType == WDG_DOUBLEVALUE_EDITOR) {
615 aWgt = new PartSet_WidgetEditor(theParent, aWorkshop, theWidgetApi, theParentId);
616 } else if (theType == "export_file_selector") {
617 aWgt = new PartSet_WidgetFileSelector(theParent, aWorkshop, theWidgetApi, theParentId);
618 } else if (theType == "sketch_launcher") {
619 aWgt = new PartSet_WidgetSketchCreator(theParent, this, theWidgetApi, theParentId);
625 bool PartSet_Module::deleteObjects()
627 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
628 XGUI_Workshop* aWorkshop = aConnector->workshop();
629 XGUI_OperationMgr* anOpMgr = aWorkshop->operationMgr();
631 //SessionPtr aMgr = ModelAPI_Session::get();
632 // 1. check whether the delete should be processed in the module
633 ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
634 bool isSketchOp = PartSet_SketcherMgr::isSketchOperation(anOperation),
635 isNestedOp = PartSet_SketcherMgr::isNestedSketchOperation(anOperation);
636 if (isSketchOp || isNestedOp) {
637 // 2. find selected presentations
638 // selected objects should be collected before the current operation abort because
639 // the abort leads to selection lost on constraint objects. It can be corrected after #386 issue
640 ModuleBase_ISelection* aSel = workshop()->selection();
641 QObjectPtrList aSelectedObj = aSel->selectedPresentations();
642 // if there are no selected objects in the viewer, that means that the selection in another
643 // place cased this method. It is necessary to return the false value to understande in above
644 // method that delete is not processed
645 if (aSelectedObj.count() == 0)
648 // avoid delete of the objects, which are not belong to the current sketch
649 // in order to do not delete results of other sketches
650 QObjectPtrList aSketchObjects;
651 QObjectPtrList::const_iterator anIt = aSelectedObj.begin(), aLast = aSelectedObj.end();
652 for ( ; anIt != aLast; anIt++) {
653 ObjectPtr anObject = *anIt;
654 if (mySketchMgr->isObjectOfSketch(anObject)) {
655 // sketch feature should be used in this list because workshop deletes features only
656 // results are skipped
657 FeaturePtr aSketchFeature = ModelAPI_Feature::feature(anObject);
658 aSketchObjects.append(aSketchFeature);
661 // if the selection contains only local selected presentations from other sketches,
662 // the Delete operation should not be done at all
663 if (aSketchObjects.size() == 0)
666 // 3. start operation
667 QString aDescription = aWorkshop->contextMenuMgr()->action("DELETE_CMD")->text();
668 ModuleBase_OperationAction* anOpAction = new ModuleBase_OperationAction(aDescription, this);
670 // the active nested sketch operation should be aborted unconditionally
671 // the Delete action should be additionally granted for the Sketch operation
672 // in order to do not abort/commit it
673 if (!anOpMgr->canStartOperation(anOpAction->id(), isSketchOp/*granted*/))
674 return true; // the objects are processed but can not be deleted
676 anOpMgr->startOperation(anOpAction);
678 // 4. delete features
679 // sketch feature should be skipped, only sub-features can be removed
680 // when sketch operation is active
681 aWorkshop->deleteFeatures(aSketchObjects);
683 anOpMgr->commitOperation();
686 bool isPartRemoved = false;
687 // Delete part with help of PartSet plugin
688 // TODO: the deleted objects has to be processed by multiselection
689 QObjectPtrList aObjects = myWorkshop->selection()->selectedObjects();
690 if (aObjects.size() == 1) {
691 ObjectPtr aObj = aObjects.first();
692 FeaturePtr aFeature = std::dynamic_pointer_cast<ModelAPI_Feature>(aObj);
693 if (aFeature.get() && (aFeature->getKind() == PartSetPlugin_Part::ID())) {
694 // Remove feature should be created in the document of the part results
695 ResultPtr aPartResult = aFeature->firstResult();
696 if (aPartResult.get()) {
697 std::shared_ptr<ModelAPI_ResultPart> aPart =
698 std::dynamic_pointer_cast<ModelAPI_ResultPart>(aPartResult);
699 DocumentPtr aPartDoc = aPart->partDoc();
700 if (aPartDoc.get()) {
701 ModuleBase_OperationAction* anOpAction = new ModuleBase_OperationAction
702 (PartSetPlugin_Remove::ID().c_str(), this);
703 if (!anOpMgr->canStartOperation(anOpAction->id()))
704 return true; // the objects are processed but can not be deleted
706 anOpMgr->startOperation(anOpAction);
708 FeaturePtr aFeature = aPartDoc->addFeature(PartSetPlugin_Remove::ID());
711 anOpMgr->commitOperation();
712 isPartRemoved = true;
717 return isPartRemoved;
722 void PartSet_Module::onFeatureTriggered()
724 QAction* aCmd = dynamic_cast<QAction*>(sender());
725 if (aCmd->isCheckable() && aCmd->isChecked()) {
726 // 1. check whether the delete should be processed in the module
727 ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
728 bool isNestedOp = PartSet_SketcherMgr::isNestedCreateOperation(anOperation);
730 // in case if in the viewer nothing is displayed, the create operation should not be
731 // comitted even if all values of the feature are initialized
732 if (!mySketchMgr->canDisplayCurrentCreatedFeature()) {
733 // the action information should be saved before the operation is aborted
734 // because this abort leads to update command status, which unchecks this action
735 anOperation->abort();
736 launchOperation(aCmd->data().toString());
740 ModuleBase_IModule::onFeatureTriggered();
743 void PartSet_Module::onObjectDisplayed(ObjectPtr theObject, AISObjectPtr theAIS)
745 Handle(AIS_InteractiveObject) anAIS = theAIS->impl<Handle(AIS_InteractiveObject)>();
746 if (!anAIS.IsNull()) {
747 Handle(AIS_InteractiveContext) aCtx = anAIS->GetContext();
748 Handle(AIS_Dimension) aDim = Handle(AIS_Dimension)::DownCast(anAIS);
749 if (!aDim.IsNull()) {
750 aCtx->SetZLayer(aDim, myVisualLayerId);
752 Handle(SketcherPrs_SymbolPrs) aCons = Handle(SketcherPrs_SymbolPrs)::DownCast(anAIS);
754 aCtx->SetZLayer(aCons, myVisualLayerId);
759 void PartSet_Module::onBeforeObjectErase(ObjectPtr theObject, AISObjectPtr theAIS)
762 // it should be recomputed in order to disappear in the viewer if the corresponded object
764 //if (myCustomPrs->isActive())
765 // myCustomPrs->redisplay(theObject, false);
768 void PartSet_Module::onViewTransformed(int theTrsfType)
770 // Set length of arrows constant in pixel size
771 // if the operation is panning or rotate or panglobal then do nothing
772 if ((theTrsfType == 1) || (theTrsfType == 3) || (theTrsfType == 4))
775 ModuleBase_IViewer* aViewer = myWorkshop->viewer();
776 //Handle(V3d_View) aView = aViewer->activeView();
778 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(myWorkshop);
779 XGUI_Workshop* aWorkshop = aConnector->workshop();
780 XGUI_Displayer* aDisplayer = aWorkshop->displayer();
781 Handle(AIS_InteractiveContext) aContext = aViewer->AISContext();
783 Handle(V3d_Viewer) aV3dViewer = aContext->CurrentViewer();
784 Handle(V3d_View) aView;
786 for (aV3dViewer->InitDefinedViews();
787 aV3dViewer->MoreDefinedViews();
788 aV3dViewer->NextDefinedViews()) {
789 Handle(V3d_View) aV = aV3dViewer->DefinedView();
790 double aS = aV->Scale();
798 double aLen = aView->Convert(20);
800 double aPrevLen = SketcherPrs_Tools::getArrowSize();
801 SketcherPrs_Tools::setArrowSize(aLen);
802 const double aPrevScale = aViewer->Scale(aViewer->activeView());
803 const double aCurScale = aViewer->activeView()->Camera()->Scale();
804 aViewer->SetScale(aViewer->activeView(), aCurScale);
805 SketcherPrs_Tools::setTextHeight (aCurScale / aPrevScale * SketcherPrs_Tools::getTextHeight());
806 bool isModified = false;
807 QList<AISObjectPtr> aPrsList = aDisplayer->displayedPresentations();
808 foreach (AISObjectPtr aAIS, aPrsList) {
809 Handle(AIS_InteractiveObject) aAisObj = aAIS->impl<Handle(AIS_InteractiveObject)>();
811 Handle(AIS_Dimension) aDim = Handle(AIS_Dimension)::DownCast(aAisObj);
812 if (!aDim.IsNull()) {
813 aDim->DimensionAspect()->ArrowAspect()->SetLength(aLen);
814 aContext->Redisplay(aDim, false);
819 aDisplayer->updateViewer();
822 bool PartSet_Module::customizeObject(ObjectPtr theObject, const bool theUpdateViewer)
824 bool isRedisplayed = false;
825 if (myCustomPrs->isActive())
826 isRedisplayed = myCustomPrs->redisplay(theObject, theUpdateViewer);
828 return isRedisplayed;
831 void PartSet_Module::customizeObjectBrowser(QWidget* theObjectBrowser)
833 XGUI_ObjectsBrowser* aOB = dynamic_cast<XGUI_ObjectsBrowser*>(theObjectBrowser);
835 QLineEdit* aLabel = aOB->activeDocLabel();
836 QPalette aPalet = aLabel->palette();
837 aPalet.setColor(QPalette::Text, QColor(0, 72, 140));
838 aLabel->setPalette(aPalet);
839 aOB->treeView()->setExpandsOnDoubleClick(false);
840 #ifdef ModuleDataModel
841 connect(aOB->treeView(), SIGNAL(doubleClicked(const QModelIndex&)),
842 SLOT(onTreeViewDoubleClick(const QModelIndex&)));
843 connect(aOB, SIGNAL(headerMouseDblClicked(const QModelIndex&)),
844 SLOT(onTreeViewDoubleClick(const QModelIndex&)));
845 connect(aOB->treeView(), SIGNAL(doubleClicked(const QModelIndex&)),
846 myDataModel, SLOT(onMouseDoubleClick(const QModelIndex&)));
851 ObjectPtr PartSet_Module::findPresentedObject(const AISObjectPtr& theAIS) const
854 ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
856 /// If last line finished on vertex the lines creation sequence has to be break
857 ModuleBase_IPropertyPanel* aPanel = aOperation->propertyPanel();
858 ModuleBase_ModelWidget* anActiveWidget = aPanel->activeWidget();
859 // if there is an active widget, find the presented object in it
861 anActiveWidget = aPanel->preselectionWidget();
863 ModuleBase_WidgetValidated* aWidgetValidated = dynamic_cast<ModuleBase_WidgetValidated*>
865 if (aWidgetValidated)
866 anObject = aWidgetValidated->findPresentedObject(theAIS);
871 void PartSet_Module::addObjectBrowserMenu(QMenu* theMenu) const
873 QObjectPtrList aObjects = myWorkshop->selection()->selectedObjects();
874 int aSelected = aObjects.size();
875 SessionPtr aMgr = ModelAPI_Session::get();
876 if (aSelected == 1) {
877 bool hasResult = false;
878 bool hasFeature = false;
879 bool hasParameter = false;
880 bool hasSubFeature = false;
881 ModuleBase_Tools::checkObjects(aObjects, hasResult, hasFeature, hasParameter, hasSubFeature);
883 ObjectPtr aObject = aObjects.first();
885 ResultPartPtr aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aObject);
886 FeaturePtr aPartFeature = std::dynamic_pointer_cast<ModelAPI_Feature>(aObject);
887 bool isPart = aPart.get() ||
888 (aPartFeature.get() && (aPartFeature->getKind() == PartSetPlugin_Part::ID()));
890 DocumentPtr aPartDoc;
892 aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aPartFeature->firstResult());
894 if (aPart.get()) // this may be null is Part feature is disabled
895 aPartDoc = aPart->partDoc();
896 if (aMgr->activeDocument() == aPartDoc)
897 theMenu->addAction(myMenuMgr->action("DEACTIVATE_PART_CMD"));
899 theMenu->addAction(myMenuMgr->action("ACTIVATE_PART_CMD"));
900 } else if (aObject->document() == aMgr->activeDocument()) {
901 if (hasParameter || hasFeature)
902 theMenu->addAction(myMenuMgr->action("EDIT_CMD"));
905 ResultBodyPtr aResult = std::dynamic_pointer_cast<ModelAPI_ResultBody>(aObject);
908 theMenu->addAction(myMenuMgr->action("SELECT_PARENT_CMD"));
910 } else { // If feature is 0 the it means that selected root object (document)
911 if (aMgr->activeDocument() != aMgr->moduleDocument())
912 theMenu->addAction(myMenuMgr->action("ACTIVATE_PARTSET_CMD"));
914 } else if (aSelected == 0) {
915 // if there is no selection then it means that upper label is selected
916 QModelIndexList aIndexes = myWorkshop->selection()->selectedIndexes();
917 if (aIndexes.size() == 0) // it means that selection happens in top label outside of tree view
918 if (aMgr->activeDocument() != aMgr->moduleDocument())
919 theMenu->addAction(myMenuMgr->action("ACTIVATE_PARTSET_CMD"));
921 bool aCanDeactivate = (myWorkshop->currentOperation() == 0);
922 myMenuMgr->action("ACTIVATE_PARTSET_CMD")->setEnabled(aCanDeactivate);
923 myMenuMgr->action("DEACTIVATE_PART_CMD")->setEnabled(aCanDeactivate);
924 myMenuMgr->action("ACTIVATE_PART_CMD")->setEnabled(aCanDeactivate);
927 void PartSet_Module::processEvent(const std::shared_ptr<Events_Message>& theMessage)
929 if (theMessage->eventID() == Events_Loop::loop()->eventByName(EVENT_DOCUMENT_CHANGED)) {
930 // Do not change activation of parts if an operation active
931 static QStringList aAllowActivationList;
932 if (aAllowActivationList.isEmpty())
933 aAllowActivationList <<
934 QString(PartSetPlugin_Part::ID().c_str()) <<
935 QString(PartSetPlugin_Duplicate::ID().c_str()) <<
936 QString(PartSetPlugin_Remove::ID().c_str());
937 if (myWorkshop->currentOperation() &&
938 (!aAllowActivationList.contains(myWorkshop->currentOperation()->id())))
940 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(myWorkshop);
941 XGUI_Workshop* aWorkshop = aConnector->workshop();
942 XGUI_DataTree* aTreeView = aWorkshop->objectBrowser()->treeView();
943 QLineEdit* aLabel = aWorkshop->objectBrowser()->activeDocLabel();
944 QPalette aPalet = aLabel->palette();
946 SessionPtr aMgr = ModelAPI_Session::get();
947 DocumentPtr aActiveDoc = aMgr->activeDocument();
948 #ifdef ModuleDataModel
949 QModelIndex aOldIndex = myDataModel->activePartTree();
950 DocumentPtr aDoc = aMgr->moduleDocument();
951 if (aActiveDoc == aDoc) {
952 if (aOldIndex.isValid())
953 aTreeView->setExpanded(aOldIndex, false);
954 myDataModel->deactivatePart();
955 aPalet.setColor(QPalette::Text, QColor(0, 72, 140));
957 std::string aGrpName = ModelAPI_ResultPart::group();
958 for (int i = 0; i < aDoc->size(aGrpName); i++) {
959 ResultPartPtr aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aDoc->object(aGrpName, i));
960 if (aPart->partDoc() == aActiveDoc) {
961 QModelIndex aIndex = myDataModel->partIndex(aPart);
962 if (myDataModel->activatePart(aIndex)) {
963 if (aOldIndex.isValid())
964 aTreeView->setExpanded(aOldIndex, false);
965 aTreeView->setExpanded(myDataModel->activePartTree(), true);
966 aPalet.setColor(QPalette::Text, Qt::black);
973 // Problem with MPV: At first time on creation it doesn't work because Part feature
974 // creation event will be sent after
975 if (aActivePartIndex.isValid())
976 aTreeView->setExpanded(aActivePartIndex, false);
977 XGUI_DataModel* aDataModel = aWorkshop->objectBrowser()->dataModel();
978 aActivePartIndex = aDataModel->documentRootIndex(aActiveDoc);
979 if (aActivePartIndex.isValid())
980 aTreeView->setExpanded(aActivePartIndex, true);
982 aLabel->setPalette(aPalet);
983 aWorkshop->updateCommandStatus();
985 // Update displayed objects in order to update active color
986 XGUI_Displayer* aDisplayer = aWorkshop->displayer();
987 QObjectPtrList aObjects = aDisplayer->displayedObjects();
988 foreach(ObjectPtr aObj, aObjects)
989 aDisplayer->redisplay(aObj, false);
990 aDisplayer->updateViewer();
994 void PartSet_Module::onTreeViewDoubleClick(const QModelIndex& theIndex)
996 if (myWorkshop->currentOperation()) // Do not change activation of parts if an operation active
998 SessionPtr aMgr = ModelAPI_Session::get();
999 if (!theIndex.isValid()) {
1000 aMgr->setActiveDocument(aMgr->moduleDocument());
1003 if (theIndex.column() != 0) // Use only first column
1005 ObjectPtr aObj = myDataModel->object(theIndex);
1006 ResultPartPtr aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aObj);
1007 if (!aPart.get()) { // Probably this is Feature
1008 FeaturePtr aPartFeature = std::dynamic_pointer_cast<ModelAPI_Feature>(aObj);
1009 if (aPartFeature.get() && (aPartFeature->getKind() == PartSetPlugin_Part::ID())) {
1010 aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aPartFeature->firstResult());
1013 if (aPart.get()) { // if this is a part
1014 if (aPart->partDoc() == aMgr->activeDocument()) {
1015 aMgr->setActiveDocument(aMgr->moduleDocument());
1023 void PartSet_Module::onViewCreated(ModuleBase_IViewWindow*)
1025 // z layer is created for all started operations in order to visualize operation AIS presentation
1027 Handle(V3d_Viewer) aViewer = myWorkshop->viewer()->AISContext()->CurrentViewer();
1028 if (myVisualLayerId == 0) {
1029 if (myVisualLayerId == 0)
1030 aViewer->AddZLayer(myVisualLayerId);
1032 TColStd_SequenceOfInteger aZList;
1033 aViewer->GetAllZLayers(aZList);
1034 bool aFound = false;
1035 for (int i = 1; i <= aZList.Length(); i++) {
1036 if (aZList(i) == myVisualLayerId) {
1042 aViewer->AddZLayer(myVisualLayerId);