1 // Copyright (C) 2014-2019 CEA/DEN, EDF R&D
3 // This library is free software; you can redistribute it and/or
4 // modify it under the terms of the GNU Lesser General Public
5 // License as published by the Free Software Foundation; either
6 // version 2.1 of the License, or (at your option) any later version.
8 // This library is distributed in the hope that it will be useful,
9 // but WITHOUT ANY WARRANTY; without even the implied warranty of
10 // MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
11 // Lesser General Public License for more details.
13 // You should have received a copy of the GNU Lesser General Public
14 // License along with this library; if not, write to the Free Software
15 // Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
17 // See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
20 #include "PartSet_Module.h"
21 #include "PartSet_WidgetSketchLabel.h"
22 #include "PartSet_Validators.h"
23 #include "PartSet_Tools.h"
24 #include "PartSet_PreviewPlanes.h"
25 #include "PartSet_WidgetPoint2d.h"
26 #include "PartSet_WidgetPoint2DFlyout.h"
27 #include "PartSet_WidgetShapeSelector.h"
28 #include "PartSet_WidgetMultiSelector.h"
29 #include "PartSet_WidgetFeaturePointSelector.h"
30 #include "PartSet_WidgetEditor.h"
31 #include "PartSet_WidgetFileSelector.h"
32 #include "PartSet_WidgetSketchCreator.h"
33 #include "PartSet_SketcherMgr.h"
34 #include "PartSet_SketcherReentrantMgr.h"
35 #include "PartSet_ResultSketchPrs.h"
36 #include "PartSet_MenuMgr.h"
37 #include "PartSet_CustomPrs.h"
38 #include "PartSet_IconFactory.h"
39 #include "PartSet_OverconstraintListener.h"
40 #include "PartSet_TreeNodes.h"
41 #include "PartSet_FieldStepPrs.h"
43 #include "PartSet_Filters.h"
44 #include "PartSet_FilterInfinite.h"
50 #include <PartSetPlugin_Remove.h>
51 #include <PartSetPlugin_Part.h>
52 #include <PartSetPlugin_Duplicate.h>
54 #include <SketchPlugin_ConstraintCoincidence.h>
56 #include <ModuleBase_Operation.h>
57 #include <ModuleBase_IViewer.h>
58 #include <ModuleBase_IViewWindow.h>
59 #include <ModuleBase_IPropertyPanel.h>
60 #include <ModuleBase_ISelectionActivate.h>
61 #include <ModuleBase_WidgetChoice.h>
62 #include <ModuleBase_WidgetEditor.h>
63 #include <ModuleBase_WidgetValidated.h>
64 #include <ModuleBase_Tools.h>
65 #include <ModuleBase_OperationFeature.h>
66 #include <ModuleBase_WidgetFactory.h>
67 #include <ModuleBase_OperationDescription.h>
68 #include <ModuleBase_ViewerPrs.h>
69 #include <ModuleBase_ResultPrs.h>
71 #include <ModelAPI_ResultField.h>
72 #include <ModelAPI_Object.h>
73 #include <ModelAPI_Events.h>
74 #include <ModelAPI_Validator.h>
75 #include <ModelAPI_Data.h>
76 #include <ModelAPI_Session.h>
77 #include <ModelAPI_ResultBody.h>
78 #include <ModelAPI_AttributeString.h>
79 #include <ModelAPI_AttributeSelectionList.h>
80 #include <ModelAPI_Tools.h>
81 #include <ModelAPI_ResultConstruction.h>
82 #include <ModelAPI_AttributeIntArray.h>
83 #include <ModelAPI_ResultGroup.h>
85 #include <GeomDataAPI_Point2D.h>
86 #include <GeomDataAPI_Point.h>
87 #include <GeomDataAPI_Dir.h>
89 #include <XGUI_ActiveControlMgr.h>
90 #include <XGUI_ActiveControlSelector.h>
91 #include <XGUI_ActionsMgr.h>
92 #include <XGUI_ContextMenuMgr.h>
93 #include <XGUI_DataModel.h>
94 #include <XGUI_Displayer.h>
95 #include <XGUI_ErrorMgr.h>
96 #include <XGUI_FacesPanelSelector.h>
97 #include <XGUI_ModuleConnector.h>
98 #include <XGUI_ObjectsBrowser.h>
99 #include <XGUI_OperationMgr.h>
100 #include <XGUI_PropertyPanel.h>
101 #include <XGUI_SelectionMgr.h>
102 #include <XGUI_Tools.h>
103 #include <XGUI_Workshop.h>
105 #include <SketchPlugin_ConstraintAngle.h>
106 #include <SketchPlugin_ConstraintLength.h>
107 #include <SketchPlugin_ConstraintDistance.h>
108 #include <SketchPlugin_ConstraintParallel.h>
109 #include <SketchPlugin_ConstraintPerpendicular.h>
110 #include <SketchPlugin_ConstraintRadius.h>
111 #include <SketchPlugin_Feature.h>
112 #include <SketchPlugin_Projection.h>
113 #include <SketchPlugin_Sketch.h>
115 #include <SketcherPrs_SymbolPrs.h>
116 #include <SketcherPrs_PositionMgr.h>
117 #include <SketcherPrs_Coincident.h>
118 #include <SketcherPrs_Tools.h>
120 #include <Events_Loop.h>
121 #include <Config_PropManager.h>
122 #include <Config_Keywords.h>
124 #include <AIS_Dimension.hxx>
125 #include <AIS_InteractiveObject.hxx>
126 #include <StdSelect_TypeOfFace.hxx>
127 #include <TopoDS_Vertex.hxx>
128 #include <TopoDS.hxx>
129 #include <TopoDS_Shape.hxx>
130 #include <BRep_Tool.hxx>
133 #include <QMouseEvent>
136 #include <QApplication>
137 #include <QMessageBox>
138 #include <QMainWindow>
142 #include <GeomAlgoAPI_FaceBuilder.h>
143 #include <GeomDataAPI_Dir.h>
145 #include <SelectMgr_ListIteratorOfListOfFilter.hxx>
147 /*!Create and return new instance of XGUI_Module*/
148 extern "C" PARTSET_EXPORT ModuleBase_IModule* createModule(ModuleBase_IWorkshop* theWshop)
150 return new PartSet_Module(theWshop);
153 //******************************************************
154 PartSet_Module::PartSet_Module(ModuleBase_IWorkshop* theWshop)
155 : ModuleBase_IModule(theWshop),
158 myIsOperationIsLaunched(false)
160 new PartSet_IconFactory(this);
162 mySketchMgr = new PartSet_SketcherMgr(this);
163 mySketchReentrantMgr = new PartSet_SketcherReentrantMgr(theWshop);
165 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(theWshop);
166 XGUI_Workshop* aWorkshop = aConnector->workshop();
168 ModuleBase_IViewer* aViewer = theWshop->viewer();
169 connect(aViewer, SIGNAL(keyRelease(ModuleBase_IViewWindow*, QKeyEvent*)),
170 this, SLOT(onKeyRelease(ModuleBase_IViewWindow*, QKeyEvent*)));
171 connect(aViewer, SIGNAL(viewTransformed(int)),
172 SLOT(onViewTransformed(int)));
173 connect(aViewer, SIGNAL(viewCreated(ModuleBase_IViewWindow*)),
174 SLOT(onViewCreated(ModuleBase_IViewWindow*)));
175 myMenuMgr = new PartSet_MenuMgr(this);
176 myCustomPrs = new PartSet_CustomPrs(theWshop);
178 myOverconstraintListener = new PartSet_OverconstraintListener(theWshop);
180 Events_Loop* aLoop = Events_Loop::loop();
181 aLoop->registerListener(this, Events_Loop::eventByName(EVENT_DOCUMENT_CHANGED));
182 aLoop->registerListener(this, Events_Loop::eventByName(EVENT_OBJECT_TO_REDISPLAY));
184 registerSelectionFilter(SF_GlobalFilter, new PartSet_GlobalFilter(myWorkshop));
185 registerSelectionFilter(SF_FilterInfinite, new PartSet_FilterInfinite(myWorkshop));
186 Handle(PartSet_ResultGroupNameFilter) aCRFilter = new PartSet_ResultGroupNameFilter(myWorkshop);
187 std::set<std::string> aCRGroupNames;
188 aCRGroupNames.insert(ModelAPI_ResultConstruction::group());
189 aCRFilter->setGroupNames(aCRGroupNames);
190 registerSelectionFilter(SF_ResultGroupNameFilter, aCRFilter);
192 setDefaultConstraintShown();
194 //Config_PropManager::registerProp("Visualization", "object_default_color", "Object color",
195 // Config_Prop::Color, "225,225,225");
197 Config_PropManager::registerProp("Visualization", "result_body_color", "Result color",
198 Config_Prop::Color, ModelAPI_ResultBody::DEFAULT_COLOR());
200 Config_PropManager::registerProp("Visualization", "result_group_color", "Group color",
201 Config_Prop::Color, ModelAPI_ResultGroup::DEFAULT_COLOR());
203 Config_PropManager::registerProp("Visualization", "result_construction_color",
204 "Construction color",
206 ModelAPI_ResultConstruction::DEFAULT_COLOR());
208 Config_PropManager::registerProp("Visualization", "result_part_color", "Part color",
209 Config_Prop::Color, ModelAPI_ResultPart::DEFAULT_COLOR());
211 Config_PropManager::registerProp("Visualization", "result_field_color", "Field color",
212 Config_Prop::Color, ModelAPI_ResultField::DEFAULT_COLOR());
214 Config_PropManager::registerProp("Visualization", "operation_parameter_color",
215 "Reference shape wireframe color in operation", Config_Prop::Color,
216 PartSet_CustomPrs::OPERATION_PARAMETER_COLOR());
217 Config_PropManager::registerProp("Visualization", "operation_result_color",
218 "Result shape wireframe color in operation", Config_Prop::Color,
219 PartSet_CustomPrs::OPERATION_RESULT_COLOR());
220 Config_PropManager::registerProp("Visualization", "operation_highlight_color",
221 "Multi selector item color in operation", Config_Prop::Color,
222 PartSet_CustomPrs::OPERATION_HIGHLIGHT_COLOR());
223 Config_PropManager::registerProp("Visualization", "operation_remove_feature_color",
224 "Color of removed feature in operation", Config_Prop::Color,
225 PartSet_CustomPrs::OPERATION_REMOVE_FEATURE_COLOR());
226 Config_PropManager::registerProp("Visualization", "sketch_preview_plane",
227 "Color of sketch plane", Config_Prop::Color,
228 PartSet_CustomPrs::OPERATION_SKETCH_PLANE());
230 Config_PropManager::registerProp("Visualization", "hidden_face_transparency",
231 "Hidden faces transparency",
232 Config_Prop::DblSpin,
234 std::ostringstream aStream;
235 aStream << SketcherPrs_Tools::getDefaultArrowSize();
236 Config_PropManager::registerProp("Visualization", "dimension_arrow_size",
237 "Dimension arrow size", Config_Prop::IntSpin, aStream.str());
239 Config_PropManager::registerProp("Visualization", "dimension_font", "Dimension font",
240 Config_Prop::String, "Times-bold");
244 aStream << SketcherPrs_Tools::getDefaultTextHeight();
245 Config_PropManager::registerProp("Visualization", "dimension_value_size",
246 "Dimension value size", Config_Prop::IntSpin, aStream.str());
248 Config_PropManager::registerProp("Visualization", "sketch_dimension_color",
250 Config_Prop::Color, SKETCH_DIMENSION_COLOR);
252 Config_PropManager::registerProp("Shortcuts", "add_parameter_shortcut",
253 "Add parameter in parameters manager dialog",
254 Config_Prop::Shortcut, "Ctrl+A");
256 Config_PropManager::registerProp("Windows", "use_hide_faces_panel",
257 "Use HideFaces panel in operations", Config_Prop::Boolean, "false");
260 //******************************************************
261 PartSet_Module::~PartSet_Module()
264 delete myOverconstraintListener;
268 //******************************************************
269 void PartSet_Module::createFeatures()
271 ModuleBase_IModule::createFeatures();
272 myRoot = new PartSet_RootNode();
273 myRoot->setWorkshop(workshop());
277 //******************************************************
278 void PartSet_Module::storeSelection()
280 // cash is used only to restore selection, so it should be filled in storeSelection and
281 // after applying immediatelly cleared in restoreSelection
282 myCurrentSelection.clear();
283 sketchMgr()->storeSelection(PartSet_SketcherMgr::ST_SelectType, myCurrentSelection);
286 //******************************************************
287 void PartSet_Module::restoreSelection()
289 // cash is used only to restore selection, so it should be filled in storeSelection and
290 // after applying immediatelly cleared in restoreSelection
291 sketchMgr()->restoreSelection(myCurrentSelection);
292 myCurrentSelection.clear();
295 //******************************************************
296 void PartSet_Module::registerValidators()
298 //Registering of validators
299 SessionPtr aMgr = ModelAPI_Session::get();
300 ModelAPI_ValidatorsFactory* aFactory = aMgr->validators();
301 aFactory->registerValidator("PartSet_DistanceSelection", new PartSet_DistanceSelection);
302 aFactory->registerValidator("PartSet_LengthSelection", new PartSet_LengthSelection);
303 aFactory->registerValidator("PartSet_PerpendicularSelection", new PartSet_PerpendicularSelection);
304 aFactory->registerValidator("PartSet_ParallelSelection", new PartSet_ParallelSelection);
305 aFactory->registerValidator("PartSet_RadiusSelection", new PartSet_RadiusSelection);
306 aFactory->registerValidator("PartSet_RigidSelection", new PartSet_RigidSelection);
307 aFactory->registerValidator("PartSet_CoincidentSelection", new PartSet_CoincidentSelection);
308 aFactory->registerValidator("PartSet_HVDirSelection", new PartSet_HVDirSelection);
309 aFactory->registerValidator("PartSet_TangentSelection", new PartSet_TangentSelection);
310 aFactory->registerValidator("PartSet_FilletSelection", new PartSet_FilletSelection);
311 aFactory->registerValidator("PartSet_AngleSelection", new PartSet_AngleSelection);
312 aFactory->registerValidator("PartSet_EqualSelection", new PartSet_EqualSelection);
313 aFactory->registerValidator("PartSet_CollinearSelection", new PartSet_CollinearSelection);
314 aFactory->registerValidator("PartSet_MiddlePointSelection", new PartSet_MiddlePointSelection);
315 aFactory->registerValidator("PartSet_DifferentObjects", new PartSet_DifferentObjectsValidator);
316 aFactory->registerValidator("PartSet_DifferentPoints", new PartSet_DifferentPointsValidator);
317 aFactory->registerValidator("PartSet_CoincidentAttr", new PartSet_CoincidentAttr);
318 aFactory->registerValidator("PartSet_MultyTranslationSelection",
319 new PartSet_MultyTranslationSelection);
320 aFactory->registerValidator("PartSet_SplitSelection", new PartSet_SplitSelection);
321 aFactory->registerValidator("PartSet_ProjectionSelection", new PartSet_ProjectionSelection);
322 aFactory->registerValidator("PartSet_IntersectionSelection", new PartSet_IntersectionSelection);
325 //******************************************************
326 void PartSet_Module::connectToPropertyPanel(ModuleBase_ModelWidget* theWidget,
327 const bool isToConnect)
329 mySketchMgr->connectToPropertyPanel(theWidget, isToConnect);
332 //******************************************************
333 void PartSet_Module::operationCommitted(ModuleBase_Operation* theOperation)
335 if (sketchMgr()->isNestedSketchOperation(theOperation)) {
336 mySketchMgr->commitNestedSketch(theOperation);
338 /// deactivate of overconstraint listener should be performed after Sketch commit (#2176)
339 if (PartSet_SketcherMgr::isSketchOperation(theOperation))
340 overconstraintListener()->setActive(false);
342 /// Restart sketcher operations automatically
343 if (!mySketchReentrantMgr->operationCommitted(theOperation)) {
345 ModuleBase_OperationFeature* aFOperation =
346 dynamic_cast<ModuleBase_OperationFeature*>(theOperation);
347 if (aFOperation && !aFOperation->isEditOperation()) {
348 // the selection is cleared after commit the create operation
349 // in order to do not use the same selected objects in the restarted operation
350 // for common behaviour, the selection is cleared even if the operation is not restarted
351 getWorkshop()->selector()->clearSelection();
356 //******************************************************
357 void PartSet_Module::operationAborted(ModuleBase_Operation* theOperation)
359 /// Restart sketcher operations automatically
360 mySketchReentrantMgr->operationAborted(theOperation);
361 /// deactivate of overconstraint listener should be performed after Sketch abort (#2176)
362 if (PartSet_SketcherMgr::isSketchOperation(theOperation))
363 overconstraintListener()->setActive(false);
366 //******************************************************
367 void PartSet_Module::operationStarted(ModuleBase_Operation* theOperation)
369 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>
372 XGUI_Workshop* aWorkshop = XGUI_Tools::workshop(workshop());
373 XGUI_PropertyPanel* aPropertyPanel = aWorkshop->propertyPanel();
375 ModuleBase_ModelWidget* aFilledWidget = 0;
376 bool aPostonedWidgetActivation = false;
378 FeaturePtr aFeature = aFOperation->feature();
379 /// Restart sketcher operations automatically
380 /// it is important to call method of sketch reentrant manager before filling of PP
381 /// because it fills some created feature attributes, these new values should be used
382 /// to fill the property panel
383 mySketchReentrantMgr->operationStarted(theOperation);
385 aWorkshop->fillPropertyPanel(aFOperation);
386 // filling the operation values by the current selection
387 // if the operation can be committed after the controls filling, the method perform should
388 // be stopped. Otherwise unnecessary presentations can be shown(e.g. operation prs in sketch)
389 bool isOperationCommitted = false;
390 if (!aFOperation->isEditOperation()) {
391 std::string aGreedAttributeId = ModuleBase_Tools::findGreedAttribute(workshop(), aFeature);
392 // if there is a greed attribute, automatic commit by preselection
393 // for this feature is prohibited
394 aFilledWidget = aFOperation->activateByPreselection(aGreedAttributeId);
395 if (currentOperation() != aFOperation)
396 isOperationCommitted = true;
398 if (aGreedAttributeId.empty()) {
399 // a signal should be emitted before the next widget activation
400 // because, the activation of the next widget will give a focus to the widget.
401 // As a result the value of the widget is initialized.
402 // And commit may happens until the value is entered.
404 if (mySketchReentrantMgr->canBeCommittedByPreselection())
405 isOperationCommitted = mySketchMgr->operationActivatedByPreselection();
406 // activate the next obligatory widget
407 if (!isOperationCommitted)
408 aPropertyPanel->activateNextWidget(aFilledWidget);
411 else { // there is a greed widget
412 const QList<ModuleBase_ModelWidget*>& aWidgets = aPropertyPanel->modelWidgets();
413 std::string aFirstAttributeId = aWidgets.front()->attributeID();
414 // activate next widget after greeded if it is the first widget in the panel
415 // else the first panel widget is already activated by operation start
416 if (aFirstAttributeId == aGreedAttributeId)
417 aPostonedWidgetActivation = true;
420 } if (!isOperationCommitted) {
421 aWorkshop->connectToPropertyPanel(true);
422 updateSketcherOnStart(aFOperation);
423 updatePresentationsOnStart(aFOperation);
425 // the objects of the current operation should be deactivated
426 QObjectPtrList anObjects;
427 anObjects.append(aFeature);
428 std::list<ResultPtr> aResults;
429 ModelAPI_Tools::allResults(aFeature, aResults);
430 std::list<ResultPtr>::const_iterator aIt;
431 for (aIt = aResults.begin(); aIt != aResults.end(); ++aIt) {
432 anObjects.append(*aIt);
434 QObjectPtrList::const_iterator anIt = anObjects.begin(), aLast = anObjects.end();
435 for (; anIt != aLast; anIt++)
436 aWorkshop->deactivateActiveObject(*anIt, false);
437 if (anObjects.size() > 0) {
438 XGUI_Displayer* aDisplayer = aWorkshop->displayer();
439 aDisplayer->updateViewer();
441 /// state of command actions should be updated after displayed objects modification because
442 /// deactivation(for example) of objects may influence on selection in the viewer
443 /// State of command actions may depend on selection in the viewer(e.g. Sketch)
444 workshop()->updateCommandStatus();
446 if (aPostonedWidgetActivation) {
447 // if the widget is an empty in the chain of activated widgets, the current operation
448 // is restarted. It should be performed after functionality of the operation starting
449 aPropertyPanel->activateNextWidget(aFilledWidget);
454 //******************************************************
455 void PartSet_Module::updateSketcherOnStart(ModuleBase_Operation* theOperation)
457 if (PartSet_SketcherMgr::isSketchOperation(theOperation)) {
458 mySketchMgr->startSketch(theOperation);
460 // It is switched off because of
461 // Task #3067: 5.2.2 Drawing in the sketcher: change the mouse cursor arrow
462 //else if (sketchMgr()->isNestedSketchOperation(theOperation)) {
463 // mySketchMgr->startNestedSketch(theOperation);
467 //******************************************************
468 void PartSet_Module::updatePresentationsOnStart(ModuleBase_Operation* theOperation)
470 ModuleBase_OperationFeature* aFOperation =
471 dynamic_cast<ModuleBase_OperationFeature*>(theOperation);
473 myCustomPrs->activate(aFOperation->feature(), ModuleBase_IModule::CustomizeArguments, false);
474 myCustomPrs->activate(aFOperation->feature(), ModuleBase_IModule::CustomizeResults, false);
478 //******************************************************
479 void PartSet_Module::operationResumed(ModuleBase_Operation* theOperation)
481 ModuleBase_IModule::operationResumed(theOperation);
483 ModuleBase_OperationFeature* aFOperation =
484 dynamic_cast<ModuleBase_OperationFeature*>(theOperation);
486 myCustomPrs->activate(aFOperation->feature(), ModuleBase_IModule::CustomizeArguments, false);
487 myCustomPrs->activate(aFOperation->feature(), ModuleBase_IModule::CustomizeResults, false);
491 //******************************************************
492 void PartSet_Module::operationStopped(ModuleBase_Operation* theOperation)
494 bool isModifiedArgs = myCustomPrs->deactivate(ModuleBase_IModule::CustomizeArguments, false);
495 bool isModifiedResults = myCustomPrs->deactivate(ModuleBase_IModule::CustomizeResults, false);
496 bool isModified = isModifiedArgs || isModifiedResults;
498 if (sketchMgr()->isNestedSketchOperation(theOperation)) {
499 mySketchMgr->stopNestedSketch(theOperation);
501 else if (PartSet_SketcherMgr::isSketchOperation(theOperation))
502 setDefaultConstraintShown();
504 //VSV: Viewer is updated on feature update and redisplay
506 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(myWorkshop);
507 XGUI_Displayer* aDisplayer = aConnector->workshop()->displayer();
508 aDisplayer->updateViewer();
511 QMap<PartSet_Tools::ConstraintVisibleState, bool>::const_iterator
512 anIt = myHasConstraintShown.begin(), aLast = myHasConstraintShown.end();
513 for (; anIt != aLast; anIt++) {
514 mySketchMgr->updateBySketchParameters(anIt.key(), anIt.value());
518 //******************************************************
519 ModuleBase_Operation* PartSet_Module::currentOperation() const
521 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
522 XGUI_OperationMgr* anOpMgr = aConnector->workshop()->operationMgr();
523 return anOpMgr->currentOperation();
526 //******************************************************
527 bool PartSet_Module::canUndo() const
529 bool aCanUndo = false;
530 SessionPtr aMgr = ModelAPI_Session::get();
531 if (aMgr->hasModuleDocument() && aMgr->canUndo()) {
532 aCanUndo = !aMgr->isOperation();
533 if (!aCanUndo) // check the enable state additionally by sketch manager
534 aCanUndo = aMgr->canUndo();
539 //******************************************************
540 bool PartSet_Module::canRedo() const
542 bool aCanRedo = false;
543 SessionPtr aMgr = ModelAPI_Session::get();
544 if (aMgr->hasModuleDocument() && aMgr->canRedo()) {
545 aCanRedo = !aMgr->isOperation();
546 if (!aCanRedo) // check the enable state additionally by sketch manager
547 aCanRedo = aMgr->canRedo();
552 //******************************************************
553 bool PartSet_Module::canApplyAction(const ObjectPtr& theObject, const QString& theActionId) const
556 if (theActionId == "MOVE_CMD") {
557 FeaturePtr aFeature = ModelAPI_Feature::feature(theObject);
559 ResultPtr aResult = ModuleBase_Tools::firstResult(aFeature);
560 // part features can not be moved in the history.
561 if (aResult.get() && aResult->groupName() == ModelAPI_ResultPart::group())
568 //******************************************************
569 bool PartSet_Module::canEraseObject(const ObjectPtr& theObject) const
571 // the sketch manager put the restriction to the objects erase
572 return mySketchMgr->canEraseObject(theObject);
575 //******************************************************
576 bool PartSet_Module::canDisplayObject(const ObjectPtr& theObject) const
578 // the sketch manager put the restriction to the objects display
579 return mySketchMgr->canDisplayObject(theObject);
582 //******************************************************
583 bool PartSet_Module::canUsePreselection(const QString& thePreviousOperationKind,
584 const QString& theStartedOperationKind)
586 if (ModuleBase_IModule::canUsePreselection(thePreviousOperationKind, theStartedOperationKind))
589 return mySketchMgr->isNestedSketchFeature(theStartedOperationKind);
592 /*void PartSet_Module::processHiddenObject(const std::list<ObjectPtr>& theObjects)
594 mySketchMgr->processHiddenObject(theObjects);
597 //******************************************************
598 bool PartSet_Module::canActivateSelection(const ObjectPtr& theObject) const
600 bool aCanActivate = ModuleBase_IModule::canActivateSelection(theObject);
602 ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
603 bool isSketchOp = PartSet_SketcherMgr::isSketchOperation(anOperation),
604 isNestedOp = sketchMgr()->isNestedSketchOperation(anOperation);
605 if (isSketchOp || isNestedOp) {
606 // in active sketch operation it is possible to activate operation object in selection
607 // in the edit operation, e.g. points of the line can be moved when the line is edited
608 ModuleBase_OperationFeature* aFOperation =
609 dynamic_cast<ModuleBase_OperationFeature*>(anOperation);
610 aCanActivate = aCanActivate || (aFOperation && aFOperation->isEditOperation());
615 //******************************************************
616 bool PartSet_Module::addViewerMenu(const QMap<QString, QAction*>& theStdActions,
618 QMap<int, QAction*>& theMenuActions) const
620 return myMenuMgr->addViewerMenu(theStdActions, theParent, theMenuActions);
623 //******************************************************
624 void PartSet_Module::updateViewerMenu(const QMap<QString, QAction*>& theStdActions)
626 myMenuMgr->updateViewerMenu(theStdActions);
629 //******************************************************
630 bool PartSet_Module::isActionEnableStateFixed(const int theActionId) const
632 bool isEnabledFixed = false;
633 if (theActionId == XGUI_ActionsMgr::AcceptAll &&
634 mySketchReentrantMgr->isInternalEditActive())
635 isEnabledFixed = true;
636 return isEnabledFixed;
639 //******************************************************
640 QString PartSet_Module::getFeatureError(const FeaturePtr& theFeature)
642 QString anError = ModuleBase_IModule::getFeatureError(theFeature);
643 if (anError.isEmpty())
644 anError = sketchMgr()->getFeatureError(theFeature);
649 //******************************************************
650 void PartSet_Module::grantedOperationIds(ModuleBase_Operation* theOperation,
651 QStringList& theIds) const
653 myMenuMgr->grantedOperationIds(theOperation, theIds);
655 if (PartSet_SketcherMgr::isSketchOperation(theOperation)) {
656 XGUI_Workshop* aWorkshop = getWorkshop();
657 theIds.append(aWorkshop->contextMenuMgr()->action("DELETE_CMD")->text());
661 //******************************************************
662 void PartSet_Module::activeSelectionModes(QIntList& theModes)
664 if (mySketchMgr->activeSketch().get())
665 PartSet_SketcherMgr::sketchSelectionModes(mySketchMgr->activeSketch(), theModes);
667 theModes = XGUI_Tools::workshop(myWorkshop)->viewerSelectionModes();
670 //******************************************************
671 void PartSet_Module::moduleSelectionModes(int theModesType, QIntList& theModes)
673 customSubShapesSelectionModes(theModes);
674 //theModes.append(XGUI_Tools::workshop(myWorkshop)->viewerSelectionModes());
675 //myWorkshop->module()->activeSelectionModes(theModes);
678 //******************************************************
679 void PartSet_Module::moduleSelectionFilters(const QIntList& theFilterTypes,
680 SelectMgr_ListOfFilter& theSelectionFilters)
682 bool isSketchActive = mySketchMgr->activeSketch().get();
684 std::map<ModuleBase_SelectionFilterType, Handle(SelectMgr_Filter)>::const_iterator aFiltersIt =
685 mySelectionFilters.begin();
686 for (; aFiltersIt != mySelectionFilters.end(); aFiltersIt++) {
687 int aFilterType = aFiltersIt->first;
688 // do not add not participating filters in given parameters
689 if (!theFilterTypes.contains(aFilterType))
692 // using sketch filters only if sketch operation is active
693 if (!isSketchActive &&
694 mySketchMgr->sketchSelectionFilter((ModuleBase_SelectionFilterType)aFilterType))
697 // using filtering of construction results only from faces panel
698 if (aFilterType == SF_ResultGroupNameFilter)
701 theSelectionFilters.Append(aFiltersIt->second);
705 //******************************************************
706 void PartSet_Module::customSubShapesSelectionModes(QIntList& theModes)
708 if (theModes.contains(TopAbs_FACE))
709 theModes.append(SketcherPrs_Tools::Sel_Sketch_Face);
710 if (theModes.contains(TopAbs_WIRE))
711 theModes.append(SketcherPrs_Tools::Sel_Sketch_Wire);
713 if (mySketchMgr->activeSketch().get())
714 PartSet_SketcherMgr::sketchSelectionModes(mySketchMgr->activeSketch(), theModes);
717 //******************************************************
718 void PartSet_Module::getGeomSelection(const std::shared_ptr<ModuleBase_ViewerPrs>& theSelected,
719 ObjectPtr& theObject, AttributePtr& theAttribute)
721 ObjectPtr anObject = theSelected->object();
722 GeomShapePtr aShape = theSelected->shape();
724 theAttribute = findAttribute(anObject, aShape);
725 // TODO: try to create result if object is an external object
726 theObject = anObject;
729 //******************************************************
730 bool PartSet_Module::isMouseOverWindow()
732 return mySketchMgr->isMouseOverWindow();
735 //******************************************************
736 bool PartSet_Module::isSketchNeutralPointActivated() const
738 bool isNeutralPoint = true;
739 if (sketchReentranceMgr()->isInternalEditActive())
740 isNeutralPoint = false;
741 if (myIsOperationIsLaunched)
742 isNeutralPoint = false;
744 return isNeutralPoint;
747 //******************************************************
748 void PartSet_Module::closeDocument()
750 myActivePartIndex = QModelIndex();
751 SketcherPrs_PositionMgr::get()->clearAll();
754 //******************************************************
755 void PartSet_Module::clearViewer()
757 myCustomPrs->clearPrs();
759 XGUI_Workshop* aWorkshop = getWorkshop();
760 XGUI_Displayer* aDisplayer = aWorkshop->displayer();
761 aDisplayer->deactivateSelectionFilters(false);
764 //******************************************************
765 void PartSet_Module::propertyPanelDefined(ModuleBase_Operation* theOperation)
767 ModuleBase_OperationFeature* aFOperation =
768 dynamic_cast<ModuleBase_OperationFeature*>(theOperation);
772 ModuleBase_IPropertyPanel* aPanel = aFOperation->propertyPanel();
773 // we have to manually activate the sketch label in edit mode
774 if (PartSet_SketcherMgr::isSketchOperation(aFOperation) && (aFOperation->isEditOperation()))
775 aPanel->activateWidget(aPanel->modelWidgets().first());
778 //******************************************************
779 bool PartSet_Module::createWidgets(const FeaturePtr& theFeature, const QString& theXmlRepr,
780 QList<ModuleBase_ModelWidget*>& theWidgets) const
782 bool aProcessed = false;
784 XGUI_Workshop* aWorkshop = getWorkshop();
785 XGUI_PropertyPanel* aPropertyPanel = aWorkshop->propertyPanel();
786 if (mySketchMgr->activeSketch().get() && aPropertyPanel) {
787 ModuleBase_ISelection* aSelection = workshop()->selection();
788 // click on a point in sketch leads here with the point is highlighted, not yet selected
789 QList<ModuleBase_ViewerPrsPtr> aPreselection = aSelection->getHighlighted();
790 if (aPreselection.size() == 1) {
791 ModuleBase_ViewerPrsPtr aSelectedPrs = aPreselection[0];
792 ObjectPtr anObject = aSelectedPrs->object();
794 FeaturePtr aFeature = ModelAPI_Feature::feature(anObject);
795 GeomShapePtr aShape = aSelectedPrs->shape();
796 // click on the digit of dimension constrain comes here
797 // with an empty shape, so we need the check
798 if (aFeature == theFeature && aShape.get() && !aShape->isNull()) {
799 // if feature has only one result and shape of result is equal to selected shape
800 // this attribute is not processed. It is a case of Sketch Point.
801 if (aFeature->results().size() == 1) {
802 ResultPtr aResult = aFeature->results().front();
803 if (aResult.get() && aResult->shape()->isEqual(aShape))
806 const TopoDS_Shape& aTDShape = aShape->impl<TopoDS_Shape>();
807 AttributePtr anAttribute = PartSet_Tools::findAttributeBy2dPoint(anObject, aTDShape,
808 mySketchMgr->activeSketch());
809 if (anAttribute.get()) {
810 ModuleBase_WidgetFactory aFactory(theXmlRepr.toStdString(), workshop());
812 const std::string anAttributeId = anAttribute->id();
813 aFactory.createWidget(aPropertyPanel->contentWidget(), anAttributeId);
815 theWidgets = aFactory.getModelWidgets();
816 // it is possible that the point does not present in XML definition,
817 // in this case, we assume that it is not processed by this module
818 // e.g. "Intersection point" feature
819 aProcessed = !theWidgets.isEmpty();
827 //******************************************************
828 void PartSet_Module::onSelectionChanged()
830 ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
834 bool isSketcherOp = false;
835 // An edit operation is enable only if the current opeation is the sketch operation
836 if (mySketchMgr->activeSketch()) {
837 if (PartSet_Tools::sketchPlane(mySketchMgr->activeSketch()))
838 isSketcherOp = PartSet_SketcherMgr::isSketchOperation(aOperation);
841 // Editing of constraints can be done on selection
842 ModuleBase_ISelection* aSelect = myWorkshop->selection();
843 QList<ModuleBase_ViewerPrsPtr> aSelected = aSelect->getSelected();
844 if (aSelected.size() == 1) {
845 ModuleBase_ViewerPrsPtr aPrs = aSelected.first();
846 ObjectPtr aObject = aPrs->object();
847 FeaturePtr aFeature = ModelAPI_Feature::feature(aObject);
849 std::string aId = aFeature->getKind();
850 if ((aId == SketchPlugin_ConstraintRadius::ID()) ||
851 (aId == SketchPlugin_ConstraintLength::ID()) ||
852 (aId == SketchPlugin_ConstraintDistance::ID()) ||
853 (aId == SketchPlugin_ConstraintAngle::ID())) {
854 editFeature(aFeature);
861 //******************************************************
862 void PartSet_Module::onKeyRelease(ModuleBase_IViewWindow* theWnd, QKeyEvent* theEvent)
864 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
865 XGUI_OperationMgr* anOpMgr = aConnector->workshop()->operationMgr();
866 anOpMgr->onKeyReleased(theWnd->viewPort(), theEvent);
869 //******************************************************
870 ModuleBase_ModelWidget* PartSet_Module::createWidgetByType(const std::string& theType,
872 Config_WidgetAPI* theWidgetApi)
874 ModuleBase_IWorkshop* aWorkshop = workshop();
875 XGUI_Workshop* aXUIWorkshop = getWorkshop();
876 ModuleBase_ModelWidget* aWgt = NULL;
877 if (theType == "sketch-start-label") {
878 PartSet_WidgetSketchLabel* aLabelWgt = new PartSet_WidgetSketchLabel(theParent, aWorkshop,
879 theWidgetApi, myHasConstraintShown);
880 connect(aLabelWgt, SIGNAL(planeSelected(const std::shared_ptr<GeomAPI_Pln>&)),
881 mySketchMgr, SLOT(onPlaneSelected(const std::shared_ptr<GeomAPI_Pln>&)));
882 connect(aLabelWgt, SIGNAL(showConstraintToggled(int, bool)),
883 mySketchMgr, SLOT(onShowConstraintsToggle(int, bool)));
884 connect(aLabelWgt, SIGNAL(showFreePoints(bool)), mySketchMgr, SLOT(onShowPoints(bool)));
885 connect(aLabelWgt, SIGNAL(autoConstraints(bool)),
886 sketchReentranceMgr(), SLOT(onAutoConstraints(bool)));
887 aLabelWgt->setShowPointsState(mySketchMgr->isShowFreePointsShown());
889 } else if (theType == "sketch-2dpoint_selector") {
890 PartSet_WidgetPoint2D* aPointWgt = new PartSet_WidgetPoint2D(theParent, aWorkshop,
892 aPointWgt->setSketch(mySketchMgr->activeSketch());
893 connect(aPointWgt, SIGNAL(vertexSelected()), sketchReentranceMgr(), SLOT(onVertexSelected()));
895 }else if (theType == "sketch-2dpoint_flyout_selector") {
896 PartSet_WidgetPoint2DFlyout* aPointWgt = new PartSet_WidgetPoint2DFlyout(theParent, aWorkshop,
898 aPointWgt->setSketch(mySketchMgr->activeSketch());
899 connect(aPointWgt, SIGNAL(vertexSelected()), sketchReentranceMgr(), SLOT(onVertexSelected()));
901 } else if (theType == "sketch_shape_selector") {
902 PartSet_WidgetShapeSelector* aShapeSelectorWgt =
903 new PartSet_WidgetShapeSelector(theParent, aWorkshop, theWidgetApi);
904 aShapeSelectorWgt->setSketcher(mySketchMgr->activeSketch());
905 aWgt = aShapeSelectorWgt;
906 } else if (theType == "sketch_multi_selector") {
907 PartSet_WidgetMultiSelector* aShapeSelectorWgt =
908 new PartSet_WidgetMultiSelector(theParent, aWorkshop, theWidgetApi);
909 aShapeSelectorWgt->setSketcher(mySketchMgr->activeSketch());
910 aWgt = aShapeSelectorWgt;
912 else if (theType == "sketch_feature_point_selector") {
913 PartSet_WidgetFeaturePointSelector* aPointSelectorWgt =
914 new PartSet_WidgetFeaturePointSelector(theParent, aWorkshop, theWidgetApi);
915 aPointSelectorWgt->setSketcher(mySketchMgr->activeSketch());
916 aWgt = aPointSelectorWgt;
918 else if (theType == WDG_DOUBLEVALUE_EDITOR) {
919 aWgt = new PartSet_WidgetEditor(theParent, aWorkshop, theWidgetApi);
920 } else if (theType == "export_file_selector") {
921 aWgt = new PartSet_WidgetFileSelector(theParent, aWorkshop, theWidgetApi);
922 } else if (theType == "sketch_launcher") {
923 aWgt = new PartSet_WidgetSketchCreator(theParent, this, theWidgetApi);
924 } else if (theType == "module_choice") {
925 aWgt = new ModuleBase_WidgetChoice(theParent, theWidgetApi);
926 connect(aWgt, SIGNAL(itemSelected(ModuleBase_ModelWidget*, int)),
927 this, SLOT(onChoiceChanged(ModuleBase_ModelWidget*, int)));
932 //******************************************************
933 ModuleBase_ModelWidget* PartSet_Module::activeWidget() const
935 ModuleBase_ModelWidget* anActiveWidget = 0;
937 ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
939 return anActiveWidget;
941 ModuleBase_IPropertyPanel* aPanel = aOperation->propertyPanel();
943 return anActiveWidget;
945 return aPanel->activeWidget(true);
948 //******************************************************
949 bool PartSet_Module::deleteObjects()
951 bool isProcessed = false;
953 XGUI_Workshop* aWorkshop = getWorkshop();
954 XGUI_OperationMgr* anOpMgr = aWorkshop->operationMgr();
956 //SessionPtr aMgr = ModelAPI_Session::get();
957 // 1. check whether the delete should be processed in the module
958 ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
959 bool isSketchOp = PartSet_SketcherMgr::isSketchOperation(anOperation),
960 isNestedOp = sketchMgr()->isNestedSketchOperation(anOperation);
961 if (isSketchOp || isNestedOp) {
963 // 2. find selected presentations
964 // selected objects should be collected before the current operation abort because
965 // the abort leads to selection lost on constraint objects. It can be corrected after #386 issue
966 ModuleBase_ISelection* aSel = workshop()->selection();
967 QObjectPtrList aSelectedObj = aSel->selectedPresentations();
968 // if there are no selected objects in the viewer, that means that the selection in another
969 // place cased this method. It is necessary to return the false value to understande in above
970 // method that delete is not processed
971 if (aSelectedObj.count() == 0)
974 // avoid delete of the objects, which are not belong to the current sketch
975 // in order to do not delete results of other sketches
976 QObjectPtrList aSketchObjects;
977 QObjectPtrList::const_iterator anIt = aSelectedObj.begin(), aLast = aSelectedObj.end();
978 for ( ; anIt != aLast; anIt++) {
979 ObjectPtr anObject = *anIt;
980 if (mySketchMgr->isObjectOfSketch(anObject)) {
981 // sketch feature should be used in this list because workshop deletes features only
982 // results are skipped
983 FeaturePtr aSketchFeature = ModelAPI_Feature::feature(anObject);
984 aSketchObjects.append(aSketchFeature);
987 // if the selection contains only local selected presentations from other sketches,
988 // the Delete operation should not be done at all
989 if (aSketchObjects.size() == 0)
992 // 3. start operation
993 QString aDescription = aWorkshop->contextMenuMgr()->action("DELETE_CMD")->text();
994 ModuleBase_Operation* anOpAction = new ModuleBase_Operation(aDescription, this);
996 // the active nested sketch operation should be aborted unconditionally
997 // the Delete action should be additionally granted for the Sketch operation
998 // in order to do not abort/commit it
1000 if (!anOpMgr->canStartOperation(anOpAction->id(), isCommitted))
1001 return true; // the objects are processed but can not be deleted
1003 anOpMgr->startOperation(anOpAction);
1005 // WORKAROUND, should be done to avoid viewer highlight update after deletetion of objects
1006 // the problem is in AIS Dimensions recompute
1007 // if a line and the dim are removed, line is the first
1008 // it causes the AIS recompute, where the base line is null,
1009 // the result is empty AIS in the viewer
1010 XGUI_Tools::workshop(myWorkshop)->selector()->clearSelection();
1012 // 4. delete features
1013 // sketch feature should be skipped, only sub-features can be removed
1014 // when sketch operation is active
1015 aWorkshop->deleteFeatures(aSketchObjects);
1016 // 5. stop operation
1017 anOpMgr->commitOperation();
1022 //******************************************************
1023 void PartSet_Module::editFeature(FeaturePtr theFeature)
1025 storeConstraintsState(theFeature->getKind());
1026 ModuleBase_IModule::editFeature(theFeature);
1029 //******************************************************
1030 bool PartSet_Module::canCommitOperation() const
1035 //******************************************************
1036 void PartSet_Module::launchOperation(const QString& theCmdId, const bool& isStartAfterCommitOnly)
1038 myIsOperationIsLaunched = true;
1039 storeConstraintsState(theCmdId.toStdString());
1040 updateConstraintsState(theCmdId.toStdString());
1042 ModuleBase_IModule::launchOperation(theCmdId, isStartAfterCommitOnly);
1044 myIsOperationIsLaunched = false;
1047 //******************************************************
1048 void PartSet_Module::storeConstraintsState(const std::string& theFeatureKind)
1050 if (myWorkshop->currentOperation() &&
1051 myWorkshop->currentOperation()->id().toStdString() == SketchPlugin_Sketch::ID()) {
1052 const QMap<PartSet_Tools::ConstraintVisibleState, bool>& aShownStates =
1053 mySketchMgr->showConstraintStates();
1054 myHasConstraintShown = aShownStates;
1058 //******************************************************
1059 void PartSet_Module::updateConstraintsState(const std::string& theFeatureKind)
1061 if (PartSet_SketcherMgr::constraintsIdList().contains(theFeatureKind.c_str()) ||
1062 PartSet_SketcherMgr::replicationsIdList().contains(theFeatureKind.c_str())) {
1063 // Show constraints if a constraint was anOperation
1064 mySketchMgr->updateBySketchParameters(PartSet_Tools::Geometrical, true);
1065 mySketchMgr->updateBySketchParameters(PartSet_Tools::Dimensional, true);
1066 mySketchMgr->updateBySketchParameters(PartSet_Tools::Expressions,
1067 myHasConstraintShown[PartSet_Tools::Expressions]);
1071 //******************************************************
1072 void PartSet_Module::onObjectDisplayed(ObjectPtr theObject, AISObjectPtr theAIS)
1074 Handle(AIS_InteractiveObject) anAIS = theAIS->impl<Handle(AIS_InteractiveObject)>();
1075 if (!anAIS.IsNull()) {
1076 FeaturePtr aFeature = ModelAPI_Feature::feature(theObject);
1077 if (aFeature.get()) {
1078 bool aToUseZLayer = false;
1079 if (PartSet_Tools::findRefsToMeFeature(aFeature,SketchPlugin_Projection::ID()))
1080 aToUseZLayer = true;
1082 CompositeFeaturePtr aParent = ModelAPI_Tools::compositeOwner(aFeature);
1083 aToUseZLayer = (aParent.get() && (aParent->getKind() == SketchPlugin_Sketch::ID()));
1086 Handle(AIS_InteractiveContext) aCtx = anAIS->GetContext();
1087 if (aFeature->getKind() == SketchPlugin_ConstraintCoincidence::ID())
1088 aCtx->SetZLayer(anAIS, Graphic3d_ZLayerId_Top);
1090 aCtx->SetZLayer(anAIS, myVisualLayerId);
1096 //******************************************************
1097 void PartSet_Module::onBeforeObjectErase(ObjectPtr theObject, AISObjectPtr theAIS)
1100 // it should be recomputed in order to disappear in the viewer if the corresponded object
1102 //if (myCustomPrs->isActive())
1103 // myCustomPrs->redisplay(theObject, false);
1106 //******************************************************
1107 void PartSet_Module::onViewTransformed(int theTrsfType)
1109 // Set length of arrows constant in pixel size
1110 // if the operation is panning or rotate or panglobal then do nothing
1111 if ((theTrsfType == 1) || (theTrsfType == 3) || (theTrsfType == 4))
1113 ModuleBase_IViewer* aViewer = myWorkshop->viewer();
1114 Handle(AIS_InteractiveContext) aContext = aViewer->AISContext();
1115 if (aContext.IsNull())
1118 //Handle(V3d_View) aView = aViewer->activeView();
1120 XGUI_Workshop* aWorkshop = getWorkshop();
1121 XGUI_Displayer* aDisplayer = aWorkshop->displayer();
1122 Handle(V3d_Viewer) aV3dViewer = aContext->CurrentViewer();
1123 Handle(V3d_View) aView;
1125 for (aV3dViewer->InitDefinedViews();
1126 aV3dViewer->MoreDefinedViews();
1127 aV3dViewer->NextDefinedViews()) {
1128 Handle(V3d_View) aV = aV3dViewer->DefinedView();
1129 double aS = aV->Scale();
1138 bool isModified = false;
1139 ModuleBase_Operation* aCurrentOperation = myWorkshop->currentOperation();
1140 if (aCurrentOperation &&
1141 (PartSet_SketcherMgr::isSketchOperation(aCurrentOperation) ||
1142 sketchMgr()->isNestedSketchOperation(aCurrentOperation) ||
1143 (aCurrentOperation->id() == "Measurement")))
1145 double aLen = aView->Convert(SketcherPrs_Tools::getConfigArrowSize());
1147 double aPrevLen = SketcherPrs_Tools::getArrowSize();
1148 SketcherPrs_Tools::setArrowSize(aLen);
1149 const double aCurScale = aViewer->activeView()->Camera()->Scale();
1150 aViewer->SetScale(aViewer->activeView(), aCurScale);
1152 QList<Handle(AIS_InteractiveObject)> aPrsList = aDisplayer->displayedPresentations();
1153 foreach(Handle(AIS_InteractiveObject) aAisObj, aPrsList) {
1155 QList<AISObjectPtr> aPrsList = aDisplayer->displayedPresentations();
1156 foreach(AISObjectPtr aAIS, aPrsList) {
1157 Handle(AIS_InteractiveObject) aAisObj = aAIS->impl<Handle(AIS_InteractiveObject)>();
1159 Handle(AIS_Dimension) aDim = Handle(AIS_Dimension)::DownCast(aAisObj);
1160 if (!aDim.IsNull()) {
1161 aDim->DimensionAspect()->ArrowAspect()->SetLength(aLen);
1162 aContext->Redisplay(aDim, false);
1167 aDisplayer->updateViewer();
1172 //******************************************************
1173 bool PartSet_Module::isCustomPrsActivated(const ModuleBase_CustomizeFlag& theFlag) const
1175 return myCustomPrs->isActive(theFlag);
1178 //******************************************************
1179 void PartSet_Module::activateCustomPrs(const FeaturePtr& theFeature,
1180 const ModuleBase_CustomizeFlag& theFlag,
1181 const bool theUpdateViewer)
1183 myCustomPrs->activate(theFeature, theFlag, theUpdateViewer);
1186 //******************************************************
1187 void PartSet_Module::deactivateCustomPrs(const ModuleBase_CustomizeFlag& theFlag,
1188 const bool theUpdateViewer)
1190 myCustomPrs->deactivate(theFlag, theUpdateViewer);
1193 //******************************************************
1194 //bool PartSet_Module::customisePresentation(ResultPtr theResult, AISObjectPtr thePrs,
1195 // std::shared_ptr<GeomAPI_ICustomPrs> theCustomPrs)
1197 // bool aCustomized = false;
1199 // XGUI_Workshop* aWorkshop = getWorkshop();
1200 // XGUI_Displayer* aDisplayer = aWorkshop->displayer();
1201 // ObjectPtr anObject = aDisplayer->getObject(thePrs);
1203 // return aCustomized;
1205 // if (!theResult.get()) {
1206 // std::vector<int> aColor;
1207 // XGUI_CustomPrs::getDefaultColor(anObject, true, aColor);
1208 // if (!aColor.empty()) {
1209 // aCustomized = thePrs->setColor(aColor[0], aColor[1], aColor[2]);
1212 // // customize dimentional constrains
1213 // sketchMgr()->customisePresentation(anObject);
1215 // return aCustomized;
1218 ////******************************************************
1219 //bool PartSet_Module::afterCustomisePresentation(std::shared_ptr<ModelAPI_Result> theResult,
1220 // AISObjectPtr thePrs,
1221 // GeomCustomPrsPtr theCustomPrs)
1223 // bool aCustomized = false;
1225 // XGUI_Workshop* aWorkshop = getWorkshop();
1226 // XGUI_Displayer* aDisplayer = aWorkshop->displayer();
1227 // ObjectPtr anObject = aDisplayer->getObject(thePrs);
1229 // return aCustomized;
1231 // std::vector<int> aColor;
1232 // bool aUseCustomColor = true;
1233 // if (aUseCustomColor)
1234 // myOverconstraintListener->getCustomColor(anObject, aColor);
1235 // // customize sketch symbol presentation
1236 // Handle(AIS_InteractiveObject) anAISIO = thePrs->impl<Handle(AIS_InteractiveObject)>();
1237 // if (!anAISIO.IsNull()) {
1238 // if (!Handle(SketcherPrs_SymbolPrs)::DownCast(anAISIO).IsNull()) {
1239 // Handle(SketcherPrs_SymbolPrs) aPrs = Handle(SketcherPrs_SymbolPrs)::DownCast(anAISIO);
1240 // if (!aPrs.IsNull()) {
1241 // aPrs->SetCustomColor(aColor);
1242 // aCustomized = true;
1244 // } else if (!Handle(SketcherPrs_Coincident)::DownCast(anAISIO).IsNull()) {
1245 // Handle(SketcherPrs_Coincident) aPrs = Handle(SketcherPrs_Coincident)::DownCast(anAISIO);
1246 // if (!aPrs.IsNull()) {
1247 // aPrs->SetCustomColor(aColor);
1248 // aCustomized = true;
1252 // // customize sketch dimension constraint presentation
1253 // if (!aCustomized) {
1254 // if (!aColor.empty()) { // otherwise presentation has the default color
1255 // aCustomized = thePrs->setColor(aColor[0], aColor[1], aColor[2]);
1258 // return aCustomized;
1261 //******************************************************
1262 bool PartSet_Module::customizeFeature(ObjectPtr theObject, const ModuleBase_CustomizeFlag& theFlag,
1263 const bool theUpdateViewer)
1265 bool isRedisplayed = false;
1266 if (myCustomPrs->isActive(theFlag))
1267 isRedisplayed = myCustomPrs->redisplay(theObject, theFlag, theUpdateViewer);
1269 return isRedisplayed;
1272 //******************************************************
1273 void PartSet_Module::customizeObjectBrowser(QWidget* theObjectBrowser)
1275 XGUI_ObjectsBrowser* aOB = dynamic_cast<XGUI_ObjectsBrowser*>(theObjectBrowser);
1277 QLabel* aLabel = aOB->activeDocLabel();
1278 aLabel->installEventFilter(myMenuMgr);
1279 connect(aLabel, SIGNAL(customContextMenuRequested(const QPoint&)),
1280 SLOT(onActiveDocPopup(const QPoint&)));
1281 aOB->treeView()->setExpandsOnDoubleClick(false);
1282 connect(aOB->treeView(), SIGNAL(doubleClicked(const QModelIndex&)),
1283 SLOT(onTreeViewDoubleClick(const QModelIndex&)));
1285 Events_Loop* aLoop = Events_Loop::loop();
1286 aLoop->registerListener(this, Events_Loop::eventByName(EVENT_OBJECT_CREATED));
1290 //******************************************************
1291 void PartSet_Module::onActiveDocPopup(const QPoint& thePnt)
1293 SessionPtr aMgr = ModelAPI_Session::get();
1294 QAction* aActivatePartAction = myMenuMgr->action("ACTIVATE_PARTSET_CMD");
1296 XGUI_Workshop* aWorkshop = getWorkshop();
1297 QLabel* aHeader = aWorkshop->objectBrowser()->activeDocLabel();
1299 aActivatePartAction->setEnabled((aMgr->activeDocument() != aMgr->moduleDocument()));
1302 aMenu.addAction(aActivatePartAction);
1303 aMenu.exec(aHeader->mapToGlobal(thePnt));
1306 //******************************************************
1307 AISObjectPtr PartSet_Module::createPresentation(const ObjectPtr& theObject)
1309 Handle(AIS_InteractiveObject) anAISPrs = mySketchMgr->createPresentation(theObject);
1310 if (anAISPrs.IsNull()) {
1311 ResultPtr aResult = std::dynamic_pointer_cast<ModelAPI_Result>(theObject);
1312 if (aResult.get()) {
1313 std::shared_ptr<GeomAPI_Shape> aShapePtr = ModelAPI_Tools::shape(aResult);
1314 if (aShapePtr.get() != NULL)
1315 anAISPrs = new ModuleBase_ResultPrs(aResult);
1318 FieldStepPtr aStep =
1319 std::dynamic_pointer_cast<ModelAPI_ResultField::ModelAPI_FieldStep>(theObject);
1321 anAISPrs = new PartSet_FieldStepPrs(aStep);
1326 if (!anAISPrs.IsNull()) {
1327 Handle(AIS_Shape) aShapePrs = Handle(AIS_Shape)::DownCast(anAISPrs);
1328 if (!aShapePrs.IsNull())
1329 ModuleBase_Tools::setPointBallHighlighting((AIS_Shape*)aShapePrs.get());
1331 anAIS = AISObjectPtr(new GeomAPI_AISObject());
1332 anAIS->setImpl(new Handle(AIS_InteractiveObject)(anAISPrs));
1333 customizePresentation(theObject, anAIS);
1338 //******************************************************
1339 void getResultColor(const ResultPtr& theResult, std::vector<int>& theColor)
1341 ModelAPI_Tools::getColor(theResult, theColor);
1342 if (theColor.empty())
1343 PartSet_Tools::getDefaultColor(theResult, false, theColor);
1346 //******************************************************
1347 double getResultDeflection(const ResultPtr& theResult)
1349 double aDeflection = ModelAPI_Tools::getDeflection(theResult);
1350 if (aDeflection < 0)
1351 aDeflection = PartSet_Tools::getDefaultDeflection(theResult);
1355 //******************************************************
1356 double getResultTransparency(const ResultPtr& theResult)
1358 double aTransparency = ModelAPI_Tools::getTransparency(theResult);
1359 if (aTransparency < 0)
1360 aTransparency = PartSet_Tools::getDefaultTransparency();
1361 return aTransparency;
1365 //******************************************************
1366 void PartSet_Module::customizePresentation(const ObjectPtr& theObject,
1367 const AISObjectPtr& thePrs) const
1369 if (mySketchMgr->isSketchStarted()) {
1370 mySketchMgr->customizeSketchPresentation(theObject, thePrs);
1373 ResultPtr aResult = std::dynamic_pointer_cast<ModelAPI_Result>(theObject);
1374 if (aResult.get()) {
1375 std::vector<int> aColor;
1376 getResultColor(aResult, aColor);
1378 SessionPtr aMgr = ModelAPI_Session::get();
1379 if (aMgr->activeDocument() != aResult->document()) {
1380 QColor aQColor(aColor[0], aColor[1], aColor[2]);
1382 QColor::fromHsvF(aQColor.hueF(), aQColor.saturationF() / 3., aQColor.valueF());
1383 aColor[0] = aNewColor.red();
1384 aColor[1] = aNewColor.green();
1385 aColor[2] = aNewColor.blue();
1387 thePrs->setColor(aColor[0], aColor[1], aColor[2]);
1389 thePrs->setDeflection(getResultDeflection(aResult));
1391 thePrs->setTransparency(getResultTransparency(aResult));
1393 FeaturePtr aFeature = ModelAPI_Feature::feature(theObject);
1394 if (aFeature.get()) {
1395 if (aFeature->getKind() == SketchPlugin_Sketch::ID())
1396 thePrs->setWidth(2);
1402 //******************************************************
1403 ObjectPtr PartSet_Module::findPresentedObject(const AISObjectPtr& theAIS) const
1406 ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
1408 /// If last line finished on vertex the lines creation sequence has to be break
1409 ModuleBase_IPropertyPanel* aPanel = aOperation->propertyPanel();
1411 ModuleBase_ModelWidget* anActiveWidget = aPanel->activeWidget();
1412 // if there is an active widget, find the presented object in it
1413 if (!anActiveWidget)
1414 anActiveWidget = aPanel->preselectionWidget();
1416 ModuleBase_WidgetValidated* aWidgetValidated = dynamic_cast<ModuleBase_WidgetValidated*>
1418 if (aWidgetValidated)
1419 anObject = aWidgetValidated->findPresentedObject(theAIS);
1425 //******************************************************
1426 bool PartSet_Module::canBeShaded(Handle(AIS_InteractiveObject) theAIS) const
1428 bool aCanBeShaged = true;
1430 Handle(PartSet_ResultSketchPrs) aPrs = Handle(PartSet_ResultSketchPrs)::DownCast(theAIS);
1432 aCanBeShaged = false;
1434 return aCanBeShaged;
1437 //******************************************************
1438 void PartSet_Module::addObjectBrowserMenu(QMenu* theMenu) const
1440 QObjectPtrList aObjects = myWorkshop->selection()->selectedObjects();
1441 int aSelected = aObjects.size();
1442 SessionPtr aMgr = ModelAPI_Session::get();
1443 QAction* aActivatePartAction = myMenuMgr->action("ACTIVATE_PART_CMD");
1445 bool hasResult = false;
1446 bool hasFeature = false;
1447 bool hasParameter = false;
1448 bool hasCompositeOwner = false;
1449 bool hasResultInHistory = false;
1450 bool hasFolder = false;
1451 ModuleBase_Tools::checkObjects(aObjects, hasResult, hasFeature, hasParameter,
1452 hasCompositeOwner, hasResultInHistory, hasFolder);
1454 ModuleBase_Operation* aCurrentOp = myWorkshop->currentOperation();
1455 if (aSelected == 1) {
1456 ObjectPtr aObject = aObjects.first();
1458 ResultPartPtr aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aObject);
1459 FeaturePtr aFeature = std::dynamic_pointer_cast<ModelAPI_Feature>(aObject);
1460 bool isPart = aPart.get() ||
1461 (aFeature.get() && (aFeature->getKind() == PartSetPlugin_Part::ID()));
1463 DocumentPtr aPartDoc;
1465 aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aFeature->firstResult());
1467 if (aPart.get()) // this may be null is Part feature is disabled
1468 aPartDoc = aPart->partDoc();
1470 theMenu->addAction(aActivatePartAction);
1471 aActivatePartAction->setEnabled((aMgr->activeDocument() != aPartDoc));
1473 } else if (aObject->document() == aMgr->activeDocument()) {
1474 if (hasParameter || hasFeature) {
1475 myMenuMgr->action("EDIT_CMD")->setEnabled(true);
1476 theMenu->addAction(myMenuMgr->action("EDIT_CMD"));
1477 if (aCurrentOp && aFeature.get()) {
1478 if (aCurrentOp->id().toStdString() == aFeature->getKind())
1479 myMenuMgr->action("EDIT_CMD")->setEnabled(false);
1486 myMenuMgr->action("EDIT_CMD")->setEnabled(aCurrentOp == 0);
1487 theMenu->addAction(myMenuMgr->action("EDIT_CMD"));
1488 theMenu->addSeparator();
1491 bool aNotDeactivate = (aCurrentOp == 0);
1492 if (!aNotDeactivate) {
1493 aActivatePartAction->setEnabled(false);
1497 //******************************************************
1498 #define EXPAND_PARENT(OBJ) \
1499 QModelIndex aObjIndex = aDataModel->objectIndex(OBJ); \
1500 if (aObjIndex.isValid()) { \
1501 QModelIndex aParent = aObjIndex.parent(); \
1502 int aCount = aDataModel->rowCount(aParent); \
1504 aTreeView->setExpanded(aParent, true); \
1507 //******************************************************
1508 void PartSet_Module::processEvent(const std::shared_ptr<Events_Message>& theMessage)
1510 if (theMessage->eventID() == Events_Loop::loop()->eventByName(EVENT_DOCUMENT_CHANGED)) {
1511 // Do not change activation of parts if an operation active
1512 static QStringList aAllowActivationList;
1513 if (aAllowActivationList.isEmpty())
1514 aAllowActivationList <<
1515 QString(PartSetPlugin_Part::ID().c_str()) <<
1516 QString(PartSetPlugin_Duplicate::ID().c_str()) <<
1517 QString(PartSetPlugin_Remove::ID().c_str());
1518 if (myWorkshop->currentOperation() &&
1519 (!aAllowActivationList.contains(myWorkshop->currentOperation()->id())))
1521 XGUI_Workshop* aWorkshop = getWorkshop();
1522 XGUI_DataTree* aTreeView = aWorkshop->objectBrowser()->treeView();
1523 QLabel* aLabel = aWorkshop->objectBrowser()->activeDocLabel();
1524 QPalette aPalet = aLabel->palette();
1526 SessionPtr aMgr = ModelAPI_Session::get();
1527 DocumentPtr aActiveDoc = aMgr->activeDocument();
1529 // Clear active part index if there is no Part documents
1530 // It could be not null if document was closed and opened a new
1531 // without closeDocument call
1532 if (aMgr->allOpenedDocuments().size() <= 1)
1533 myActivePartIndex = QModelIndex();
1535 XGUI_DataModel* aDataModel = aWorkshop->objectBrowser()->dataModel();
1536 QModelIndex aOldActive = myActivePartIndex;
1537 myActivePartIndex = aDataModel->documentRootIndex(aActiveDoc, 0);
1538 bool needUpdate = false;
1539 if (myActivePartIndex.isValid()) {
1540 needUpdate = aTreeView->isExpanded(myActivePartIndex);
1542 aTreeView->setExpanded(myActivePartIndex, true);
1544 if ((aOldActive != myActivePartIndex) && (aOldActive.isValid()))
1545 aTreeView->setExpanded(aOldActive, false);
1547 aLabel->setPalette(aPalet);
1548 aWorkshop->updateCommandStatus();
1550 // Update displayed objects in order to update active color
1551 XGUI_Displayer* aDisplayer = aWorkshop->displayer();
1552 QObjectPtrList aObjects = aDisplayer->displayedObjects();
1554 bool aUpdateViewer = false;
1555 foreach(ObjectPtr aObj, aObjects) {
1556 aHidden = !aObj->data() || !aObj->data()->isValid() ||
1557 aObj->isDisabled() || (!aObj->isDisplayed());
1559 aDisplayer->redisplay(aObj, false);
1560 aUpdateViewer = true;
1564 aDisplayer->updateViewer();
1565 // Update tree items if they are expanded
1567 aTreeView->viewport()->update(aTreeView->viewport()->rect());
1569 } else if (theMessage->eventID() == Events_Loop::loop()->eventByName(EVENT_OBJECT_CREATED)) {
1570 std::shared_ptr<ModelAPI_ObjectUpdatedMessage> aUpdMsg =
1571 std::dynamic_pointer_cast<ModelAPI_ObjectUpdatedMessage>(theMessage);
1572 std::set<ObjectPtr> aObjects = aUpdMsg->objects();
1574 ObjectPtr aConstrObj;
1575 ObjectPtr aResultObj;
1576 std::set<ObjectPtr>::const_iterator aIt;
1577 DocumentPtr aRootDoc = ModelAPI_Session::get()->moduleDocument();
1578 for (aIt = aObjects.begin(); aIt != aObjects.end(); ++aIt) {
1579 ObjectPtr aObject = (*aIt);
1580 if ((!aResultObj.get()) && (aObject->groupName() == ModelAPI_ResultBody::group())
1581 && (aObject->document() != aRootDoc))
1582 aResultObj = aObject;
1583 if ((!aConstrObj.get()) && (aObject->groupName() == ModelAPI_ResultConstruction::group())
1584 && (aObject->document() != aRootDoc))
1585 aConstrObj = aObject;
1586 if (aResultObj.get() && aConstrObj.get())
1590 if (aResultObj.get() || aConstrObj.get()) {
1591 XGUI_Workshop* aWorkshop = getWorkshop();
1592 XGUI_DataTree* aTreeView = aWorkshop->objectBrowser()->treeView();
1593 XGUI_DataModel* aDataModel = aWorkshop->objectBrowser()->dataModel();
1595 if (aResultObj.get()) {
1596 EXPAND_PARENT(aResultObj)
1598 if (aConstrObj.get()) {
1599 EXPAND_PARENT(aConstrObj)
1603 else if (theMessage->eventID() == Events_Loop::loop()->eventByName(EVENT_OBJECT_TO_REDISPLAY)) {
1604 CompositeFeaturePtr aSketch = mySketchMgr->activeSketch();
1605 if (aSketch.get()) {
1606 ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
1607 if (PartSet_SketcherMgr::isSketchOperation(anOperation))
1608 mySketchMgr->previewSketchPlane()->createSketchPlane(aSketch, myWorkshop);
1613 //******************************************************
1614 void PartSet_Module::onTreeViewDoubleClick(const QModelIndex& theIndex)
1616 if (myWorkshop->currentOperation()) // Do not change activation of parts if an operation active
1618 SessionPtr aMgr = ModelAPI_Session::get();
1619 if (!theIndex.isValid()) {
1620 // It seems that this code is obsolete
1621 //aMgr->setActiveDocument(aMgr->moduleDocument());
1624 if (theIndex.column() != 1) // Use only first column
1627 XGUI_Workshop* aWorkshop = getWorkshop();
1628 XGUI_DataModel* aDataModel = aWorkshop->objectBrowser()->dataModel();
1629 // De not use non editable Indexes
1630 if ((aDataModel->flags(theIndex) & Qt::ItemIsSelectable) == 0)
1632 ObjectPtr aObj = aDataModel->object(theIndex);
1634 ResultPartPtr aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aObj);
1635 if (!aPart.get()) { // Probably this is Feature
1636 FeaturePtr aPartFeature = std::dynamic_pointer_cast<ModelAPI_Feature>(aObj);
1637 if (aPartFeature.get() && (aPartFeature->getKind() == PartSetPlugin_Part::ID())) {
1638 aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aPartFeature->firstResult());
1641 if (aPart.get()) { // if this is a part
1642 if (aPart->partDoc() == aMgr->activeDocument()) {
1643 myMenuMgr->activatePartSet();
1645 myMenuMgr->activatePart(aPart);
1650 //******************************************************
1651 void PartSet_Module::onViewCreated(ModuleBase_IViewWindow*)
1653 // z layer is created for all started operations in order to visualize operation AIS presentation
1655 Handle(AIS_InteractiveContext) aContext = myWorkshop->viewer()->AISContext();
1656 if (aContext.IsNull())
1659 Handle(V3d_Viewer) aViewer = aContext->CurrentViewer();
1660 if (myVisualLayerId == 0) {
1661 if (myVisualLayerId == 0)
1662 aViewer->AddZLayer(myVisualLayerId);
1664 TColStd_SequenceOfInteger aZList;
1665 aViewer->GetAllZLayers(aZList);
1666 bool aFound = false;
1667 for (int i = 1; i <= aZList.Length(); i++) {
1668 if (aZList(i) == myVisualLayerId) {
1674 aViewer->AddZLayer(myVisualLayerId);
1676 // if there is an active operation with validated widget,
1677 // the filters of this widget should be activated in the created view
1678 myWorkshop->selectionActivate()->updateSelectionFilters();
1679 myWorkshop->selectionActivate()->updateSelectionModes();
1682 //******************************************************
1683 void PartSet_Module::widgetStateChanged(int thePreviousState)
1685 mySketchMgr->widgetStateChanged(thePreviousState);
1688 //******************************************************
1689 bool PartSet_Module::processEnter(const std::string& thePreviousAttributeID)
1691 return mySketchReentrantMgr->processEnter(thePreviousAttributeID);
1694 //******************************************************
1695 void PartSet_Module::beforeOperationStopped(ModuleBase_Operation* theOperation)
1697 if (PartSet_SketcherMgr::isSketchOperation(theOperation)) {
1698 mySketchMgr->stopSketch(theOperation);
1702 //******************************************************
1703 GeomShapePtr PartSet_Module::findShape(const AttributePtr& theAttribute)
1705 GeomShapePtr aGeomShape;
1707 ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
1708 if (anOperation && sketchMgr()->isNestedSketchOperation(anOperation)) {
1709 aGeomShape = PartSet_Tools::findShapeBy2DPoint(theAttribute, myWorkshop);
1714 //******************************************************
1715 AttributePtr PartSet_Module::findAttribute(const ObjectPtr& theObject,
1716 const GeomShapePtr& theGeomShape)
1718 AttributePtr anAttribute;
1719 GeomShapePtr aGeomShape = theGeomShape;
1720 if (!aGeomShape.get()) {
1721 // processing shape of result, e.g. sketch circle center is selected, this is a result
1722 // the geom shape is empty, the shape of result should be used
1723 ResultPtr aResult = std::dynamic_pointer_cast<ModelAPI_Result>(theObject);
1724 if (aResult.get()) {
1725 aGeomShape = aResult->shape();
1729 if (aGeomShape.get()) {
1730 TopoDS_Shape aTDSShape = aGeomShape->impl<TopoDS_Shape>();
1731 return PartSet_Tools::findAttributeBy2dPoint(theObject, aTDSShape,
1732 mySketchMgr->activeSketch());
1737 //******************************************************
1738 std::shared_ptr<Events_Message> PartSet_Module::reentrantMessage()
1740 return sketchReentranceMgr()->reentrantMessage();
1743 //******************************************************
1744 void PartSet_Module::setReentrantPreSelection(const std::shared_ptr<Events_Message>& theMessage)
1746 sketchReentranceMgr()->setReentrantPreSelection(theMessage);
1749 //******************************************************
1750 void PartSet_Module::onChoiceChanged(ModuleBase_ModelWidget* theWidget,
1753 ModuleBase_WidgetChoice* aChoiceWidget = dynamic_cast<ModuleBase_WidgetChoice*>(theWidget);
1757 QString aChoiceTitle = aChoiceWidget->getPropertyPanelTitle(theIndex);
1758 if (!aChoiceTitle.isEmpty()) {
1759 ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
1762 ModuleBase_IPropertyPanel* aPanel = aOperation->propertyPanel();
1764 aPanel->setWindowTitle(aChoiceTitle);
1768 //******************************************************
1769 XGUI_Workshop* PartSet_Module::getWorkshop() const
1771 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
1772 return aConnector->workshop();
1775 void PartSet_Module::setDefaultConstraintShown()
1777 myHasConstraintShown[PartSet_Tools::Geometrical] = true;
1778 myHasConstraintShown[PartSet_Tools::Dimensional] = true;
1779 myHasConstraintShown[PartSet_Tools::Expressions] = false;
1782 //******************************************************
1783 ModuleBase_ITreeNode* PartSet_Module::rootNode() const
1788 //******************************************************
1789 void PartSet_Module::disableCustomMode(ModuleBase_CustomizeFlag theMode) {
1790 myCustomPrs->disableCustomMode(theMode);
1793 //******************************************************
1794 void PartSet_Module::enableCustomModes() {
1795 myCustomPrs->enableCustomModes();