1 #include "PartSet_Module.h"
2 #include <PartSet_OperationSketch.h>
3 #include <PartSet_WidgetSketchLabel.h>
4 #include <PartSet_Validators.h>
5 #include <PartSet_Tools.h>
6 #include <PartSet_WidgetPoint2D.h>
7 #include <PartSet_WidgetPoint2dDistance.h>
8 #include <PartSet_WidgetShapeSelector.h>
10 #include <ModuleBase_Operation.h>
11 #include <ModuleBase_IViewer.h>
12 #include <ModuleBase_IViewWindow.h>
13 #include <ModuleBase_IPropertyPanel.h>
15 #include <ModelAPI_Object.h>
16 #include <ModelAPI_Events.h>
17 #include <ModelAPI_Validator.h>
18 #include <ModelAPI_Data.h>
19 #include <ModelAPI_Session.h>
21 #include <GeomDataAPI_Point2D.h>
22 #include <GeomDataAPI_Point.h>
23 #include <GeomDataAPI_Dir.h>
25 #include <XGUI_MainWindow.h>
26 #include <XGUI_Displayer.h>
27 #include <XGUI_Viewer.h>
28 #include <XGUI_Workshop.h>
29 #include <XGUI_OperationMgr.h>
30 #include <XGUI_ViewPort.h>
31 #include <XGUI_ActionsMgr.h>
32 #include <XGUI_ViewerProxy.h>
33 #include <XGUI_ContextMenuMgr.h>
34 #include <XGUI_PropertyPanel.h>
35 #include <XGUI_ModuleConnector.h>
36 #include <XGUI_Tools.h>
38 #include <SketchPlugin_Line.h>
39 #include <SketchPlugin_Sketch.h>
40 #include <SketchPlugin_Point.h>
41 #include <SketchPlugin_Arc.h>
42 #include <SketchPlugin_Circle.h>
43 #include <SketchPlugin_ConstraintLength.h>
44 #include <SketchPlugin_ConstraintDistance.h>
45 #include <SketchPlugin_ConstraintParallel.h>
46 #include <SketchPlugin_ConstraintPerpendicular.h>
47 #include <SketchPlugin_ConstraintRadius.h>
48 #include <SketchPlugin_ConstraintRigid.h>
50 #include <Events_Loop.h>
51 #include <StdSelect_TypeOfFace.hxx>
54 #include <QMouseEvent>
57 #include <QApplication>
59 #include <GeomAlgoAPI_FaceBuilder.h>
60 #include <GeomDataAPI_Dir.h>
67 /*!Create and return new instance of XGUI_Module*/
68 extern "C" PARTSET_EXPORT ModuleBase_IModule* createModule(ModuleBase_IWorkshop* theWshop)
70 return new PartSet_Module(theWshop);
73 PartSet_Module::PartSet_Module(ModuleBase_IWorkshop* theWshop)
74 : ModuleBase_IModule(theWshop),
75 myIsDragging(false), myRestartingMode(true), myDragDone(false)
77 //myWorkshop = dynamic_cast<XGUI_Workshop*>(theWshop);
78 ModuleBase_IViewer* aViewer = aViewer = theWshop->viewer();
79 connect(aViewer, SIGNAL(mousePress(ModuleBase_IViewWindow*, QMouseEvent*)),
80 this, SLOT(onMousePressed(ModuleBase_IViewWindow*, QMouseEvent*)));
82 connect(aViewer, SIGNAL(mouseRelease(ModuleBase_IViewWindow*, QMouseEvent*)),
83 this, SLOT(onMouseReleased(ModuleBase_IViewWindow*, QMouseEvent*)));
85 connect(aViewer, SIGNAL(mouseMove(ModuleBase_IViewWindow*, QMouseEvent*)),
86 this, SLOT(onMouseMoved(ModuleBase_IViewWindow*, QMouseEvent*)));
90 PartSet_Module::~PartSet_Module()
94 void PartSet_Module::registerValidators()
96 //Registering of validators
97 SessionPtr aMgr = ModelAPI_Session::get();
98 ModelAPI_ValidatorsFactory* aFactory = aMgr->validators();
99 aFactory->registerValidator("PartSet_DistanceValidator", new PartSet_DistanceValidator);
100 aFactory->registerValidator("PartSet_LengthValidator", new PartSet_LengthValidator);
101 aFactory->registerValidator("PartSet_PerpendicularValidator", new PartSet_PerpendicularValidator);
102 aFactory->registerValidator("PartSet_ParallelValidator", new PartSet_ParallelValidator);
103 aFactory->registerValidator("PartSet_RadiusValidator", new PartSet_RadiusValidator);
107 void PartSet_Module::onOperationComitted(ModuleBase_Operation* theOperation)
109 if (theOperation->isEditOperation())
111 /// Restart sketcher operations automatically
112 FeaturePtr aFeature = theOperation->feature();
113 std::shared_ptr<SketchPlugin_Feature> aSPFeature =
114 std::dynamic_pointer_cast<SketchPlugin_Feature>(aFeature);
115 if (aSPFeature && myRestartingMode) {
116 myLastOperationId = theOperation->id();
117 myLastFeature = theOperation->feature();
118 launchOperation(myLastOperationId);
120 breakOperationSequence();
124 void PartSet_Module::breakOperationSequence()
126 myLastOperationId = "";
127 myLastFeature = FeaturePtr();
128 myRestartingMode = false;
132 void PartSet_Module::onOperationAborted(ModuleBase_Operation* theOperation)
134 breakOperationSequence();
137 void PartSet_Module::onOperationStarted(ModuleBase_Operation* theOperation)
139 myRestartingMode = true;
140 if (theOperation->id().toStdString() == SketchPlugin_Sketch::ID()) {
141 // Display all sketcher sub-Objects
142 myCurrentSketch = std::dynamic_pointer_cast<ModelAPI_CompositeFeature>(theOperation->feature());
143 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
144 XGUI_Displayer* aDisplayer = aConnector->workshop()->displayer();
146 for (int i = 0; i < myCurrentSketch->numberOfSubs(); i++) {
147 FeaturePtr aFeature = myCurrentSketch->subFeature(i);
148 std::list<ResultPtr> aResults = aFeature->results();
149 std::list<ResultPtr>::const_iterator aIt;
150 for (aIt = aResults.begin(); aIt != aResults.end(); ++aIt) {
151 aDisplayer->display((*aIt), false);
153 aDisplayer->display(aFeature);
155 // Hide sketcher result
156 std::list<ResultPtr> aResults = myCurrentSketch->results();
157 std::list<ResultPtr>::const_iterator aIt;
158 for (aIt = aResults.begin(); aIt != aResults.end(); ++aIt) {
159 aDisplayer->erase((*aIt), false);
161 aDisplayer->erase(myCurrentSketch);
164 if (myPlaneFilter.IsNull())
165 myPlaneFilter = new ModuleBase_ShapeInPlaneFilter();
166 myWorkshop->viewer()->addSelectionFilter(myPlaneFilter);
167 if (theOperation->isEditOperation()) {
168 // If it is editing of sketch then it means that plane is already defined
169 std::shared_ptr<GeomAPI_Pln> aPln = PartSet_Tools::sketchPlane(myCurrentSketch);
170 myPlaneFilter->setPlane(aPln->impl<gp_Pln>());
175 void PartSet_Module::onOperationStopped(ModuleBase_Operation* theOperation)
177 if (theOperation->id().toStdString() == SketchPlugin_Sketch::ID()) {
178 DataPtr aData = myCurrentSketch->data();
179 if ((!aData) || (!aData->isValid())) {
180 // The sketch was aborted
181 myCurrentSketch = CompositeFeaturePtr();
184 // Hide all sketcher sub-Objects
185 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
186 XGUI_Displayer* aDisplayer = aConnector->workshop()->displayer();
187 for (int i = 0; i < myCurrentSketch->numberOfSubs(); i++) {
188 FeaturePtr aFeature = myCurrentSketch->subFeature(i);
189 std::list<ResultPtr> aResults = aFeature->results();
190 std::list<ResultPtr>::const_iterator aIt;
191 for (aIt = aResults.begin(); aIt != aResults.end(); ++aIt) {
192 aDisplayer->erase((*aIt), false);
194 aDisplayer->erase(aFeature, false);
196 // Display sketcher result
197 std::list<ResultPtr> aResults = myCurrentSketch->results();
198 std::list<ResultPtr>::const_iterator aIt;
199 for (aIt = aResults.begin(); aIt != aResults.end(); ++aIt) {
200 aDisplayer->display((*aIt), false);
202 aDisplayer->display(myCurrentSketch);
204 myCurrentSketch = CompositeFeaturePtr();
205 myWorkshop->viewer()->removeSelectionFilter(myPlaneFilter);
209 void PartSet_Module::onPlaneSelected(const std::shared_ptr<GeomAPI_Pln>& thePln)
211 myPlaneFilter->setPlane(thePln->impl<gp_Pln>());
215 void PartSet_Module::propertyPanelDefined(ModuleBase_Operation* theOperation)
217 if ((theOperation->id() == myLastOperationId) && myLastFeature) {
218 ModuleBase_ModelWidget* aWgt = theOperation->propertyPanel()->activeWidget();
219 if (theOperation->id().toStdString() == SketchPlugin_Line::ID()) {
220 PartSet_WidgetPoint2D* aPnt2dWgt = dynamic_cast<PartSet_WidgetPoint2D*>(aWgt);
222 std::shared_ptr<ModelAPI_Data> aData = myLastFeature->data();
223 std::shared_ptr<GeomDataAPI_Point2D> aPoint =
224 std::dynamic_pointer_cast<GeomDataAPI_Point2D>(aData->attribute(SketchPlugin_Line::END_ID()));
226 aPnt2dWgt->setPoint(aPoint->x(), aPoint->y());
227 PartSet_Tools::setConstraints(myCurrentSketch, theOperation->feature(),
228 aWgt->attributeID(), aPoint->x(), aPoint->y());
229 theOperation->propertyPanel()->activateNextWidget(aPnt2dWgt);
237 void PartSet_Module::onSelectionChanged()
241 void PartSet_Module::onMousePressed(ModuleBase_IViewWindow* theWnd, QMouseEvent* theEvent)
243 if (!(theEvent->buttons() & Qt::LeftButton))
245 ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
246 // Use only for sketch operations
247 if (aOperation && myCurrentSketch) {
248 if (!PartSet_Tools::sketchPlane(myCurrentSketch))
251 bool isSketcher = (aOperation->id().toStdString() == SketchPlugin_Sketch::ID());
252 bool isSketchOpe = sketchOperationIdList().contains(aOperation->id());
254 // Avoid non-sketch operations
255 if ((!isSketchOpe) && (!isSketcher))
258 bool isEditing = aOperation->isEditOperation();
260 // Ignore creation sketch operation
261 if ((!isSketcher) && (!isEditing))
264 // Remember highlighted objects for editing
265 ModuleBase_ISelection* aSelect = myWorkshop->selection();
266 QList<ModuleBase_ViewerPrs> aObjects = aSelect->getHighlighted();
267 myEditingFeatures.clear();
268 if (aObjects.size() > 0) {
269 foreach(ModuleBase_ViewerPrs aPrs, aObjects) {
270 FeaturePtr aFeature = ModelAPI_Feature::feature(aObjects.first().object());
272 myEditingFeatures.append(aFeature);
275 // If nothing highlighted - return
276 if (myEditingFeatures.size() == 0)
280 CompositeFeaturePtr aSketch =
281 std::dynamic_pointer_cast<ModelAPI_CompositeFeature>(aOperation->feature());
282 if (!PartSet_Tools::sketchPlane(aSketch))
285 //myCurrentSketch = aOperation->feature();
287 get2dPoint(theWnd, theEvent, myCurX, myCurY);
289 myWorkshop->viewer()->enableSelection(false);
293 } else if (isSketchOpe && isEditing) {
297 get2dPoint(theWnd, theEvent, myCurX, myCurY);
299 myWorkshop->viewer()->enableSelection(false);
301 // This is necessary in order to finalize previous operation
302 QApplication::processEvents();
309 void PartSet_Module::get2dPoint(ModuleBase_IViewWindow* theWnd, QMouseEvent* theEvent,
310 double& theX, double& theY)
312 Handle(V3d_View) aView = theWnd->v3dView();
313 gp_Pnt aPoint = PartSet_Tools::convertClickToPoint(theEvent->pos(), aView);
314 PartSet_Tools::convertTo2D(aPoint, myCurrentSketch, aView, theX, theY);
318 void PartSet_Module::launchEditing()
320 if (myEditingFeatures.size() == 1) {
321 FeaturePtr aFeature = myEditingFeatures.first();
322 std::shared_ptr<SketchPlugin_Feature> aSPFeature =
323 std::dynamic_pointer_cast<SketchPlugin_Feature>(aFeature);
325 editFeature(aSPFeature);
330 /// Returns new instance of operation object (used in createOperation for customization)
331 ModuleBase_Operation* PartSet_Module::getNewOperation(const std::string& theFeatureId)
333 if (theFeatureId == PartSet_OperationSketch::Type()) {
334 return new PartSet_OperationSketch(theFeatureId.c_str(), this);
336 return ModuleBase_IModule::getNewOperation(theFeatureId);
340 void PartSet_Module::onMouseReleased(ModuleBase_IViewWindow* theWnd, QMouseEvent* theEvent)
343 myIsDragging = false;
344 myWorkshop->viewer()->enableSelection(true);
346 myWorkshop->currentOperation()->commit();
351 void PartSet_Module::onMouseMoved(ModuleBase_IViewWindow* theWnd, QMouseEvent* theEvent)
354 ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
355 if (aOperation->id().toStdString() == SketchPlugin_Sketch::ID())
356 return; // No edit operation activated
358 static Events_ID anEvent = Events_Loop::eventByName(EVENT_OBJECT_MOVED);
359 Handle(V3d_View) aView = theWnd->v3dView();
360 gp_Pnt aPoint = PartSet_Tools::convertClickToPoint(theEvent->pos(), aView);
362 PartSet_Tools::convertTo2D(aPoint, myCurrentSketch, aView, aX, aY);
363 double dX = aX - myCurX;
364 double dY = aY - myCurY;
366 std::shared_ptr<SketchPlugin_Feature> aSketchFeature =
367 std::dynamic_pointer_cast<SketchPlugin_Feature>(aOperation->feature());
368 if (aSketchFeature) {
369 aSketchFeature->move(dX, dY);
370 ModelAPI_EventCreator::get()->sendUpdated(aSketchFeature, anEvent);
371 Events_Loop::loop()->flush(Events_Loop::eventByName(EVENT_OBJECT_UPDATED));
372 }/* else { // Alternative case for moving
373 ModuleBase_IPropertyPanel* aPanel = aOperation->propertyPanel();
374 QList<ModuleBase_ModelWidget*> aWidgets = aPanel->modelWidgets();
375 foreach(ModuleBase_ModelWidget* aWgt, aWidgets) {
376 PartSet_WidgetPoint2D* aWgt2d = dynamic_cast<PartSet_WidgetPoint2D*>(aWgt);
378 aWgt2d->setPoint(aWgt2d->x() + dX, aWgt2d->y() + dY);
389 QStringList PartSet_Module::sketchOperationIdList() const
392 aIds << SketchPlugin_Line::ID().c_str();
393 aIds << SketchPlugin_Point::ID().c_str();
394 aIds << SketchPlugin_Arc::ID().c_str();
395 aIds << SketchPlugin_Circle::ID().c_str();
396 aIds << SketchPlugin_ConstraintLength::ID().c_str();
397 aIds << SketchPlugin_ConstraintDistance::ID().c_str();
398 aIds << SketchPlugin_ConstraintRigid::ID().c_str();
399 aIds << SketchPlugin_ConstraintRadius::ID().c_str();
400 aIds << SketchPlugin_ConstraintPerpendicular::ID().c_str();
401 aIds << SketchPlugin_ConstraintParallel::ID().c_str();
405 void PartSet_Module::onVertexSelected(ObjectPtr theObject, const TopoDS_Shape& theShape)
407 ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
408 if (aOperation->id().toStdString() == SketchPlugin_Line::ID()) {
409 /// If last line finished on vertex the lines creation sequence has to be break
410 ModuleBase_IPropertyPanel* aPanel = aOperation->propertyPanel();
411 const QList<ModuleBase_ModelWidget*>& aWidgets = aPanel->modelWidgets();
412 if (aWidgets.last() == aPanel->activeWidget()) {
413 breakOperationSequence();
418 QWidget* PartSet_Module::createWidgetByType(const std::string& theType, QWidget* theParent,
419 Config_WidgetAPI* theWidgetApi, std::string theParentId,
420 QList<ModuleBase_ModelWidget*>& theModelWidgets)
422 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
423 XGUI_Workshop* aWorkshop = aConnector->workshop();
424 if (theType == "sketch-start-label") {
425 PartSet_WidgetSketchLabel* aWgt = new PartSet_WidgetSketchLabel(theParent, theWidgetApi, theParentId);
426 aWgt->setWorkshop(aWorkshop);
427 connect(aWgt, SIGNAL(planeSelected(const std::shared_ptr<GeomAPI_Pln>&)),
428 this, SLOT(onPlaneSelected(const std::shared_ptr<GeomAPI_Pln>&)));
429 theModelWidgets.append(aWgt);
430 return aWgt->getControl();
432 } else if (theType == "sketch-2dpoint_selector") {
433 PartSet_WidgetPoint2D* aWgt = new PartSet_WidgetPoint2D(theParent, theWidgetApi, theParentId);
434 aWgt->setWorkshop(aWorkshop);
435 aWgt->setSketch(myCurrentSketch);
437 connect(aWgt, SIGNAL(vertexSelected(ObjectPtr, const TopoDS_Shape&)),
438 this, SLOT(onVertexSelected(ObjectPtr, const TopoDS_Shape&)));
440 theModelWidgets.append(aWgt);
441 return aWgt->getControl();
443 } if (theType == "point2ddistance") {
444 PartSet_WidgetPoint2dDistance* aWgt = new PartSet_WidgetPoint2dDistance(theParent, theWidgetApi, theParentId);
445 aWgt->setWorkshop(aWorkshop);
446 aWgt->setSketch(myCurrentSketch);
448 theModelWidgets.append(aWgt);
449 return aWgt->getControl();
451 } if (theType == "sketch_shape_selector") {
452 PartSet_WidgetShapeSelector* aWgt =
453 new PartSet_WidgetShapeSelector(theParent, workshop(), theWidgetApi, theParentId);
454 aWgt->setSketcher(myCurrentSketch);
456 theModelWidgets.append(aWgt);
457 return aWgt->getControl();