1 // Copyright (C) 2014-20xx CEA/DEN, EDF R&D
3 #include "PartSet_Module.h"
4 #include "PartSet_WidgetSketchLabel.h"
5 #include "PartSet_Validators.h"
6 #include "PartSet_Tools.h"
7 #include "PartSet_WidgetPoint2d.h"
8 #include "PartSet_WidgetPoint2dDistance.h"
9 #include "PartSet_WidgetShapeSelector.h"
10 #include "PartSet_WidgetPoint2dAngle.h"
11 #include "PartSet_WidgetMultiSelector.h"
12 #include "PartSet_WidgetEditor.h"
13 #include "PartSet_WidgetFileSelector.h"
14 #include "PartSet_WidgetSketchCreator.h"
15 #include "PartSet_SketcherMgr.h"
16 #include "PartSet_MenuMgr.h"
18 #include "PartSet_Filters.h"
19 #include "PartSet_FilterInfinite.h"
21 #include <PartSetPlugin_Remove.h>
22 #include <PartSetPlugin_Part.h>
24 #include <ModuleBase_Operation.h>
25 #include <ModuleBase_IViewer.h>
26 #include <ModuleBase_IViewWindow.h>
27 #include <ModuleBase_IPropertyPanel.h>
28 #include <ModuleBase_WidgetEditor.h>
29 #include <ModuleBase_FilterFactory.h>
30 #include <ModuleBase_Tools.h>
31 #include <GeomValidators_ShapeType.h>
33 #include <GeomValidators_Face.h>
34 #include <GeomValidators_ConstructionComposite.h>
35 #include <GeomValidators_ZeroOffset.h>
38 #include <ModelAPI_Object.h>
39 #include <ModelAPI_Events.h>
40 #include <ModelAPI_Validator.h>
41 #include <ModelAPI_Data.h>
42 #include <ModelAPI_Session.h>
43 #include <ModelAPI_ShapeValidator.h>
45 #include <GeomDataAPI_Point2D.h>
46 #include <GeomDataAPI_Point.h>
47 #include <GeomDataAPI_Dir.h>
49 #include <XGUI_Displayer.h>
50 #include <XGUI_Workshop.h>
51 #include <XGUI_OperationMgr.h>
52 #include <XGUI_PropertyPanel.h>
53 #include <XGUI_ModuleConnector.h>
54 #include <XGUI_ContextMenuMgr.h>
55 #include <XGUI_Tools.h>
56 #include <XGUI_ObjectsBrowser.h>
57 #include <XGUI_SelectionMgr.h>
59 #include <SketchPlugin_Feature.h>
60 #include <SketchPlugin_Sketch.h>
61 #include <SketchPlugin_Line.h>
62 #include <SketchPlugin_Arc.h>
63 #include <SketchPlugin_Circle.h>
64 #include <SketchPlugin_Point.h>
65 #include <SketchPlugin_ConstraintLength.h>
66 #include <SketchPlugin_ConstraintDistance.h>
67 #include <SketchPlugin_ConstraintParallel.h>
68 #include <SketchPlugin_ConstraintPerpendicular.h>
69 #include <SketchPlugin_ConstraintRadius.h>
71 #include <SketcherPrs_SymbolPrs.h>
72 #include <SketcherPrs_Tools.h>
74 #include <Events_Loop.h>
75 #include <Config_PropManager.h>
76 #include <Config_Keywords.h>
78 #include <StdSelect_TypeOfFace.hxx>
79 #include <TopoDS_Vertex.hxx>
81 #include <TopoDS_Shape.hxx>
82 #include <BRep_Tool.hxx>
83 #include <AIS_Dimension.hxx>
86 #include <QMouseEvent>
89 #include <QApplication>
90 #include <QMessageBox>
91 #include <QMainWindow>
94 #include <GeomAlgoAPI_FaceBuilder.h>
95 #include <GeomDataAPI_Dir.h>
97 #include <SelectMgr_ListIteratorOfListOfFilter.hxx>
105 /*!Create and return new instance of XGUI_Module*/
106 extern "C" PARTSET_EXPORT ModuleBase_IModule* createModule(ModuleBase_IWorkshop* theWshop)
108 return new PartSet_Module(theWshop);
111 PartSet_Module::PartSet_Module(ModuleBase_IWorkshop* theWshop)
112 : ModuleBase_IModule(theWshop),
113 myRestartingMode(RM_None), myVisualLayerId(0)
115 mySketchMgr = new PartSet_SketcherMgr(this);
116 myDataModel = new PartSet_DocumentDataModel(this);
118 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(theWshop);
119 XGUI_Workshop* aWorkshop = aConnector->workshop();
121 XGUI_OperationMgr* anOpMgr = aWorkshop->operationMgr();
122 connect(anOpMgr, SIGNAL(keyEnterReleased()), this, SLOT(onEnterReleased()));
123 connect(anOpMgr, SIGNAL(operationActivatedByPreselection()),
124 this, SLOT(onOperationActivatedByPreselection()));
126 ModuleBase_IViewer* aViewer = theWshop->viewer();
127 connect(aViewer, SIGNAL(keyRelease(ModuleBase_IViewWindow*, QKeyEvent*)),
128 this, SLOT(onKeyRelease(ModuleBase_IViewWindow*, QKeyEvent*)));
129 connect(aViewer, SIGNAL(viewTransformed(int)),
130 SLOT(onViewTransformed(int)));
132 myMenuMgr = new PartSet_MenuMgr(this);
134 Events_Loop* aLoop = Events_Loop::loop();
135 aLoop->registerListener(this, Events_Loop::eventByName(EVENT_DOCUMENT_CHANGED));
137 mySelectionFilters.Append(new PartSet_GlobalFilter(myWorkshop));
138 mySelectionFilters.Append(new PartSet_FilterInfinite(myWorkshop));
141 PartSet_Module::~PartSet_Module()
143 SelectMgr_ListIteratorOfListOfFilter aIt(mySelectionFilters);
144 for (; aIt.More(); aIt.Next()) {
145 Handle(SelectMgr_Filter) aFilter = aIt.Value();
146 if (!aFilter.IsNull())
151 void PartSet_Module::activateSelectionFilters()
153 SelectMgr_ListIteratorOfListOfFilter aIt(mySelectionFilters);
154 for (; aIt.More(); aIt.Next()) {
155 Handle(SelectMgr_Filter) aFilter = aIt.Value();
156 if (!aFilter.IsNull())
157 myWorkshop->viewer()->addSelectionFilter(aFilter);
161 void PartSet_Module::deactivateSelectionFilters()
163 SelectMgr_ListIteratorOfListOfFilter aIt(mySelectionFilters);
164 for (; aIt.More(); aIt.Next()) {
165 Handle(SelectMgr_Filter) aFilter = aIt.Value();
166 if (!aFilter.IsNull())
167 myWorkshop->viewer()->removeSelectionFilter(aFilter);
171 void PartSet_Module::registerValidators()
173 //Registering of validators
174 SessionPtr aMgr = ModelAPI_Session::get();
175 ModelAPI_ValidatorsFactory* aFactory = aMgr->validators();
176 aFactory->registerValidator("PartSet_DistanceSelection", new PartSet_DistanceSelection);
177 aFactory->registerValidator("PartSet_LengthSelection", new PartSet_LengthSelection);
178 aFactory->registerValidator("PartSet_PerpendicularSelection", new PartSet_PerpendicularSelection);
179 aFactory->registerValidator("PartSet_ParallelSelection", new PartSet_ParallelSelection);
180 aFactory->registerValidator("PartSet_RadiusSelection", new PartSet_RadiusSelection);
181 aFactory->registerValidator("PartSet_RigidSelection", new PartSet_RigidSelection);
182 aFactory->registerValidator("PartSet_CoincidentSelection", new PartSet_CoincidentSelection);
183 aFactory->registerValidator("PartSet_HVDirSelection", new PartSet_HVDirSelection);
184 aFactory->registerValidator("PartSet_TangentSelection", new PartSet_TangentSelection);
185 aFactory->registerValidator("PartSet_FilletSelection", new PartSet_FilletSelection);
187 aFactory->registerValidator("PartSet_DifferentObjects", new PartSet_DifferentObjectsValidator);
188 aFactory->registerValidator("PartSet_DifferentShapes", new ModelAPI_ShapeValidator);
190 aFactory->registerValidator("GeomValidators_ShapeType", new GeomValidators_ShapeType);
191 aFactory->registerValidator("GeomValidators_Face", new GeomValidators_Face);
193 aFactory->registerValidator("GeomValidators_ConstructionComposite",
194 new GeomValidators_ConstructionComposite);
196 aFactory->registerValidator("GeomValidators_ZeroOffset",
197 new GeomValidators_ZeroOffset);
199 aFactory->registerValidator("PartSet_SketchEntityValidator",
200 new PartSet_SketchEntityValidator);
202 aFactory->registerValidator("PartSet_SameTypeAttr",
203 new PartSet_SameTypeAttrValidator);
206 void PartSet_Module::registerFilters()
208 //Registering of selection filters
209 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
210 ModuleBase_FilterFactory* aFactory = aConnector->selectionFilters();
213 void PartSet_Module::registerProperties()
215 Config_PropManager::registerProp("Sketch planes", "planes_size", "Size", Config_Prop::Double,
217 Config_PropManager::registerProp("Sketch planes", "planes_thickness", "Thickness",
218 Config_Prop::Integer, SKETCH_WIDTH);
221 void PartSet_Module::onOperationCommitted(ModuleBase_Operation* theOperation)
223 if (PartSet_SketcherMgr::isNestedSketchOperation(theOperation)) {
224 mySketchMgr->commitNestedSketch(theOperation);
227 if (theOperation->isEditOperation())
229 // the selection is cleared after commit the create operation
230 // in order to do not use the same selected objects in the restarted operation
231 // for common behaviour, the selection is cleared even if the operation is not restarted
232 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
233 XGUI_Workshop* aWorkshop = aConnector->workshop();
234 aWorkshop->selector()->clearSelection();
236 /// Restart sketcher operations automatically
237 FeaturePtr aFeature = theOperation->feature();
238 std::shared_ptr<SketchPlugin_Feature> aSPFeature =
239 std::dynamic_pointer_cast<SketchPlugin_Feature>(aFeature);
240 if (aSPFeature && (myRestartingMode == RM_LastFeatureUsed ||
241 myRestartingMode == RM_EmptyFeatureUsed)) {
242 myLastOperationId = theOperation->id();
243 myLastFeature = myRestartingMode == RM_LastFeatureUsed ? theOperation->feature() : FeaturePtr();
245 launchOperation(myLastOperationId);
247 breakOperationSequence();
250 void PartSet_Module::breakOperationSequence()
252 myLastOperationId = "";
253 myLastFeature = FeaturePtr();
254 myRestartingMode = RM_None;
257 void PartSet_Module::onOperationAborted(ModuleBase_Operation* theOperation)
259 breakOperationSequence();
262 void PartSet_Module::onOperationStarted(ModuleBase_Operation* theOperation)
264 if (PartSet_SketcherMgr::isSketchOperation(theOperation)) {
265 Handle(V3d_Viewer) aViewer = myWorkshop->viewer()->AISContext()->CurrentViewer();
266 aViewer->AddZLayer(myVisualLayerId);
267 mySketchMgr->startSketch(theOperation);
269 else if (PartSet_SketcherMgr::isNestedSketchOperation(theOperation)) {
270 mySketchMgr->startNestedSketch(theOperation);
274 void PartSet_Module::onOperationStopped(ModuleBase_Operation* theOperation)
276 if (PartSet_SketcherMgr::isSketchOperation(theOperation)) {
277 mySketchMgr->stopSketch(theOperation);
278 Handle(V3d_Viewer) aViewer = myWorkshop->viewer()->AISContext()->CurrentViewer();
279 aViewer->RemoveZLayer(myVisualLayerId);
282 else if (PartSet_SketcherMgr::isNestedSketchOperation(theOperation)) {
283 mySketchMgr->stopNestedSketch(theOperation);
287 ModuleBase_Operation* PartSet_Module::currentOperation() const
289 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
290 XGUI_OperationMgr* anOpMgr = aConnector->workshop()->operationMgr();
291 return anOpMgr->currentOperation();
294 bool PartSet_Module::canUndo() const
296 bool aCanUndo = false;
297 SessionPtr aMgr = ModelAPI_Session::get();
298 if (aMgr->hasModuleDocument() && aMgr->canUndo()) {
299 aCanUndo = !aMgr->isOperation();
300 if (!aCanUndo) // check the enable state additionally by sketch manager
301 aCanUndo = aMgr->canUndo();
306 bool PartSet_Module::canRedo() const
308 bool aCanRedo = false;
309 SessionPtr aMgr = ModelAPI_Session::get();
310 if (aMgr->hasModuleDocument() && aMgr->canRedo()) {
311 aCanRedo = !aMgr->isOperation();
312 if (!aCanRedo) // check the enable state additionally by sketch manager
313 aCanRedo = aMgr->canRedo();
318 bool PartSet_Module::canDisplayObject(const ObjectPtr& theObject) const
320 // the sketch manager put the restriction to the objects display
321 return mySketchMgr->canDisplayObject(theObject);
324 bool PartSet_Module::canActivateSelection(const ObjectPtr& theObject) const
326 bool aCanActivate = ModuleBase_IModule::canActivateSelection(theObject);
328 ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
329 bool isSketchOp = PartSet_SketcherMgr::isSketchOperation(anOperation),
330 isNestedOp = PartSet_SketcherMgr::isNestedSketchOperation(anOperation);
331 if (isSketchOp || isNestedOp) {
332 // in active sketch operation it is possible to activate operation object in selection
333 // in the edit operation, e.g. points of the line can be moved when the line is edited
334 aCanActivate = aCanActivate || anOperation->isEditOperation();
339 bool PartSet_Module::addViewerMenu(QMenu* theMenu, const QMap<QString, QAction*>& theStdActions) const
341 return myMenuMgr->addViewerMenu(theMenu, theStdActions);
344 void PartSet_Module::activeSelectionModes(QIntList& theModes)
347 if (mySketchMgr->activeSketch().get())
348 PartSet_SketcherMgr::sketchSelectionModes(theModes);
351 bool PartSet_Module::isMouseOverWindow()
353 return mySketchMgr->isMouseOverWindow();
356 void PartSet_Module::propertyPanelDefined(ModuleBase_Operation* theOperation)
358 ModuleBase_IPropertyPanel* aPanel = theOperation->propertyPanel();
359 if (PartSet_SketcherMgr::isSketchOperation(theOperation) && (theOperation->isEditOperation())) {
360 // we have to manually activate the sketch label in edit mode
361 aPanel->activateWidget(aPanel->modelWidgets().first());
365 // Restart last operation type
366 if ((theOperation->id() == myLastOperationId) && myLastFeature) {
367 ModuleBase_ModelWidget* aWgt = aPanel->activeWidget();
368 if (theOperation->id().toStdString() == SketchPlugin_Line::ID()) {
369 // Initialise new line with first point equal to end of previous
370 PartSet_WidgetPoint2D* aPnt2dWgt = dynamic_cast<PartSet_WidgetPoint2D*>(aWgt);
372 std::shared_ptr<ModelAPI_Data> aData = myLastFeature->data();
373 std::shared_ptr<GeomDataAPI_Point2D> aPoint =
374 std::dynamic_pointer_cast<GeomDataAPI_Point2D>(aData->attribute(SketchPlugin_Line::END_ID()));
376 aPnt2dWgt->setPoint(aPoint->x(), aPoint->y());
377 PartSet_Tools::setConstraints(mySketchMgr->activeSketch(), theOperation->feature(),
378 aWgt->attributeID(), aPoint->x(), aPoint->y());
379 aPanel->activateNextWidget(aPnt2dWgt);
384 // Start editing constraint
385 if (theOperation->isEditOperation()) {
386 // TODO: #391 - to be removed
387 std::string aId = theOperation->id().toStdString();
388 if (PartSet_SketcherMgr::isNestedSketchOperation(theOperation) &&
389 PartSet_SketcherMgr::isDistanceOperation(theOperation)) {
390 // Find and activate widget for management of point for dimension line position
391 QList<ModuleBase_ModelWidget*> aWidgets = aPanel->modelWidgets();
392 foreach (ModuleBase_ModelWidget* aWgt, aWidgets) {
393 PartSet_WidgetPoint2D* aPntWgt = dynamic_cast<PartSet_WidgetPoint2D*>(aWgt);
395 aPanel->activateWidget(aPntWgt);
405 void PartSet_Module::onSelectionChanged()
407 ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
411 bool isSketcherOp = false;
412 // An edit operation is enable only if the current opeation is the sketch operation
413 if (mySketchMgr->activeSketch()) {
414 if (PartSet_Tools::sketchPlane(mySketchMgr->activeSketch()))
415 isSketcherOp = PartSet_SketcherMgr::isSketchOperation(aOperation);
418 // Editing of constraints can be done on selection
419 ModuleBase_ISelection* aSelect = myWorkshop->selection();
420 QList<ModuleBase_ViewerPrs> aSelected = aSelect->getSelected();
421 if (aSelected.size() == 1) {
422 ModuleBase_ViewerPrs aPrs = aSelected.first();
423 ObjectPtr aObject = aPrs.object();
424 FeaturePtr aFeature = ModelAPI_Feature::feature(aObject);
426 std::string aId = aFeature->getKind();
427 if ((aId == SketchPlugin_ConstraintRadius::ID()) ||
428 (aId == SketchPlugin_ConstraintLength::ID()) ||
429 (aId == SketchPlugin_ConstraintDistance::ID())) {
430 editFeature(aFeature);
437 void PartSet_Module::onKeyRelease(ModuleBase_IViewWindow* theWnd, QKeyEvent* theEvent)
439 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
440 XGUI_OperationMgr* anOpMgr = aConnector->workshop()->operationMgr();
441 anOpMgr->onKeyReleased(theEvent);
444 void PartSet_Module::onEnterReleased()
446 myRestartingMode = RM_EmptyFeatureUsed;
449 void PartSet_Module::onOperationActivatedByPreselection()
451 ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
452 if(anOperation && PartSet_SketcherMgr::isNestedSketchOperation(anOperation)) {
453 // Set final definitions if they are necessary
454 //propertyPanelDefined(aOperation);
456 /// Commit sketcher operations automatically
457 anOperation->commit();
461 void PartSet_Module::onNoMoreWidgets()
463 ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
465 if (PartSet_SketcherMgr::isNestedSketchOperation(anOperation)) {
466 if (myRestartingMode != RM_Forbided)
467 myRestartingMode = RM_LastFeatureUsed;
468 anOperation->commit();
473 void PartSet_Module::onVertexSelected()
475 ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
476 if (aOperation->id().toStdString() == SketchPlugin_Line::ID()) {
477 /// If last line finished on vertex the lines creation sequence has to be break
478 ModuleBase_IPropertyPanel* aPanel = aOperation->propertyPanel();
479 ModuleBase_ModelWidget* anActiveWidget = aPanel->activeWidget();
480 const QList<ModuleBase_ModelWidget*>& aWidgets = aPanel->modelWidgets();
481 QList<ModuleBase_ModelWidget*>::const_iterator anIt = aWidgets.begin(), aLast = aWidgets.end();
482 bool aFoundWidget = false;
483 bool aFoundObligatory = false;
484 for (; anIt != aLast && !aFoundObligatory; anIt++) {
486 aFoundWidget = *anIt == anActiveWidget;
488 aFoundObligatory = (*anIt)->isObligatory();
490 if (!aFoundObligatory)
491 myRestartingMode = RM_Forbided;
495 ModuleBase_ModelWidget* PartSet_Module::createWidgetByType(const std::string& theType, QWidget* theParent,
496 Config_WidgetAPI* theWidgetApi, std::string theParentId)
498 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
499 XGUI_Workshop* aWorkshop = aConnector->workshop();
500 ModuleBase_ModelWidget* aWgt = NULL;
501 if (theType == "sketch-start-label") {
502 PartSet_WidgetSketchLabel* aLabelWgt = new PartSet_WidgetSketchLabel(theParent,
503 theWidgetApi, theParentId, mySketchMgr->isConstraintsShown());
504 aLabelWgt->setWorkshop(aWorkshop);
505 connect(aLabelWgt, SIGNAL(planeSelected(const std::shared_ptr<GeomAPI_Pln>&)),
506 mySketchMgr, SLOT(onPlaneSelected(const std::shared_ptr<GeomAPI_Pln>&)));
507 connect(aLabelWgt, SIGNAL(showConstraintToggled(bool)),
508 mySketchMgr, SLOT(onShowConstraintsToggle(bool)));
510 } else if (theType == "sketch-2dpoint_selector") {
511 PartSet_WidgetPoint2D* aPointWgt = new PartSet_WidgetPoint2D(theParent, theWidgetApi, theParentId);
512 aPointWgt->setWorkshop(aWorkshop);
513 aPointWgt->setSketch(mySketchMgr->activeSketch());
514 connect(aPointWgt, SIGNAL(vertexSelected()), this, SLOT(onVertexSelected()));
516 } else if (theType == "point2ddistance") {
517 PartSet_WidgetPoint2dDistance* aDistanceWgt = new PartSet_WidgetPoint2dDistance(theParent, theWidgetApi, theParentId);
518 aDistanceWgt->setWorkshop(aWorkshop);
519 aDistanceWgt->setSketch(mySketchMgr->activeSketch());
521 } else if(theType == "point2dangle") {
522 PartSet_WidgetPoint2dAngle* anAngleWgt = new PartSet_WidgetPoint2dAngle(theParent, theWidgetApi, theParentId);
523 anAngleWgt->setWorkshop(aWorkshop);
524 anAngleWgt->setSketch(mySketchMgr->activeSketch());
526 } else if (theType == "sketch_shape_selector") {
527 PartSet_WidgetShapeSelector* aShapeSelectorWgt =
528 new PartSet_WidgetShapeSelector(theParent, workshop(), theWidgetApi, theParentId);
529 aShapeSelectorWgt->setSketcher(mySketchMgr->activeSketch());
530 aWgt = aShapeSelectorWgt;
531 } else if (theType == "sketch_multi_selector") {
532 PartSet_WidgetMultiSelector* aShapeSelectorWgt =
533 new PartSet_WidgetMultiSelector(theParent, workshop(), theWidgetApi, theParentId);
534 aShapeSelectorWgt->setSketcher(mySketchMgr->activeSketch());
535 aWgt = aShapeSelectorWgt;
536 } else if (theType == WDG_DOUBLEVALUE_EDITOR) {
537 aWgt = new PartSet_WidgetEditor(theParent, workshop(), theWidgetApi, theParentId);
538 } else if (theType == "export_file_selector") {
539 aWgt = new PartSet_WidgetFileSelector(theParent, workshop(), theWidgetApi, theParentId);
540 } else if (theType == "sketch_launcher") {
541 aWgt = new PartSet_WidgetSketchCreator(theParent, this, theWidgetApi, theParentId);
547 bool PartSet_Module::deleteObjects()
549 SessionPtr aMgr = ModelAPI_Session::get();
550 // 1. check whether the delete should be processed in the module
551 ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
552 bool isSketchOp = PartSet_SketcherMgr::isSketchOperation(anOperation),
553 isNestedOp = PartSet_SketcherMgr::isNestedSketchOperation(anOperation);
554 if (isSketchOp || isNestedOp) {
555 // 2. find selected presentations
556 // selected objects should be collected before the current operation abort because
557 // the abort leads to selection lost on constraint objects. It can be corrected after #386 issue
558 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
559 XGUI_Workshop* aWorkshop = aConnector->workshop();
560 ModuleBase_ISelection* aSel = workshop()->selection();
561 QObjectPtrList aSelectedObj = aSel->selectedPresentations();
562 // if there are no selected objects in the viewer, that means that the selection in another
563 // place cased this method. It is necessary to return the false value to understande in above
564 // method that delete is not processed
565 if (aSelectedObj.count() == 0)
568 // avoid delete of the objects, which are not belong to the current sketch
569 // in order to do not delete results of other sketches
570 QObjectPtrList aSketchObjects;
571 QObjectPtrList::const_iterator anIt = aSelectedObj.begin(), aLast = aSelectedObj.end();
572 for ( ; anIt != aLast; anIt++) {
573 ObjectPtr anObject = *anIt;
574 if (mySketchMgr->isObjectOfSketch(anObject)) {
575 // sketch feature should be used in this list because workshop deletes features only
576 // results are skipped
577 FeaturePtr aSketchFeature = ModelAPI_Feature::feature(anObject);
578 aSketchObjects.append(aSketchFeature);
581 // if the selection contains only local selected presentations from other sketches,
582 // the Delete operation should not be done at all
583 if (aSketchObjects.size() == 0)
586 // the active nested sketch operation should be aborted unconditionally
588 anOperation->abort();
590 // 3. start operation
591 QString aDescription = aWorkshop->contextMenuMgr()->action("DELETE_CMD")->text();
592 aMgr->startOperation(aDescription.toStdString());
594 // 4. delete features
595 // sketch feature should be skipped, only sub-features can be removed
596 // when sketch operation is active
597 std::set<FeaturePtr> anIgnoredFeatures;
598 anIgnoredFeatures.insert(mySketchMgr->activeSketch());
599 aWorkshop->deleteFeatures(aSketchObjects, anIgnoredFeatures);
602 aWorkshop->displayer()->updateViewer();
603 aMgr->finishOperation();
605 bool isPartRemoved = false;
606 // Delete part with help of PartSet plugin
607 // TODO: the deleted objects has to be processed by multiselection
608 QObjectPtrList aObjects = myWorkshop->selection()->selectedObjects();
609 if (aObjects.size() == 1) {
610 ObjectPtr aObj = aObjects.first();
611 FeaturePtr aFeature = std::dynamic_pointer_cast<ModelAPI_Feature>(aObj);
612 if (aFeature.get() && (aFeature->getKind() == PartSetPlugin_Part::ID())) {
613 // Remove feature should be created in the document of the part results
614 ResultPtr aPartResult = aFeature->firstResult();
615 if (aPartResult.get()) {
616 std::shared_ptr<ModelAPI_ResultPart> aPart =
617 std::dynamic_pointer_cast<ModelAPI_ResultPart>(aPartResult);
618 DocumentPtr aPartDoc = aPart->partDoc();
619 if (aPartDoc.get()) {
620 aMgr->startOperation(PartSetPlugin_Remove::ID());
621 FeaturePtr aFeature = aPartDoc->addFeature(PartSetPlugin_Remove::ID());
623 aMgr->finishOperation();
624 isPartRemoved = true;
629 return isPartRemoved;
634 void PartSet_Module::onFeatureTriggered()
636 SessionPtr aMgr = ModelAPI_Session::get();
637 // 1. check whether the delete should be processed in the module
638 ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
639 bool isNestedOp = PartSet_SketcherMgr::isNestedCreateOperation(anOperation);
641 // in case if in the viewer nothing is displayed, the create operation should not be
642 // comitted even if all values of the feature are initialized
643 if (!mySketchMgr->canDisplayCurrentCreatedFeature()) {
644 QAction* aCmd = dynamic_cast<QAction*>(sender());
645 //Do nothing on uncheck
646 if (aCmd->isCheckable() && !aCmd->isChecked())
649 // the action information should be saved before the operation is aborted
650 // because this abort leads to update command status, which unchecks this action
651 anOperation->abort();
653 launchOperation(aCmd->data().toString());
656 ModuleBase_IModule::onFeatureTriggered();
659 void PartSet_Module::onObjectDisplayed(ObjectPtr theObject, AISObjectPtr theAIS)
661 Handle(AIS_InteractiveObject) anAIS = theAIS->impl<Handle(AIS_InteractiveObject)>();
662 if (!anAIS.IsNull()) {
663 Handle(AIS_InteractiveContext) aCtx = anAIS->GetContext();
664 Handle(AIS_Dimension) aDim = Handle(AIS_Dimension)::DownCast(anAIS);
665 if (!aDim.IsNull()) {
666 aCtx->SetZLayer(aDim, myVisualLayerId);
668 Handle(SketcherPrs_SymbolPrs) aCons = Handle(SketcherPrs_SymbolPrs)::DownCast(anAIS);
670 aCtx->SetZLayer(aCons, myVisualLayerId);
675 void PartSet_Module::onViewTransformed(int theTrsfType)
677 // Set length of arrows constant in pixel size
678 // if the operation is panning or rotate or panglobal then do nothing
679 if ((theTrsfType == 1) || (theTrsfType == 3) || (theTrsfType == 4))
682 ModuleBase_IViewer* aViewer = myWorkshop->viewer();
683 //Handle(V3d_View) aView = aViewer->activeView();
685 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(myWorkshop);
686 XGUI_Workshop* aWorkshop = aConnector->workshop();
687 XGUI_Displayer* aDisplayer = aWorkshop->displayer();
688 Handle(AIS_InteractiveContext) aContext = aViewer->AISContext();
690 Handle(V3d_Viewer) aV3dViewer = aContext->CurrentViewer();
691 Handle(V3d_View) aView;
693 for (aV3dViewer->InitDefinedViews();
694 aV3dViewer->MoreDefinedViews();
695 aV3dViewer->NextDefinedViews()) {
696 Handle(V3d_View) aV = aV3dViewer->DefinedView();
697 double aS = aV->Scale();
705 double aLen = aView->Convert(20);
707 double aPrevLen = SketcherPrs_Tools::getArrowSize();
708 SketcherPrs_Tools::setArrowSize(aLen);
709 const double aPrevScale = aViewer->Scale(aViewer->activeView());
710 const double aCurScale = aViewer->activeView()->Camera()->Scale();
711 aViewer->SetScale(aViewer->activeView(), aCurScale);
712 SketcherPrs_Tools::setTextHeight (aCurScale / aPrevScale * SketcherPrs_Tools::getTextHeight());
713 bool isModified = false;
714 QList<AISObjectPtr> aPrsList = aDisplayer->displayedPresentations();
715 foreach (AISObjectPtr aAIS, aPrsList) {
716 Handle(AIS_InteractiveObject) aAisObj = aAIS->impl<Handle(AIS_InteractiveObject)>();
718 Handle(AIS_Dimension) aDim = Handle(AIS_Dimension)::DownCast(aAisObj);
719 if (!aDim.IsNull()) {
720 aDim->DimensionAspect()->ArrowAspect()->SetLength(aLen);
721 aContext->Redisplay(aDim, false);
726 aDisplayer->updateViewer();
730 void PartSet_Module::customizeObjectBrowser(QWidget* theObjectBrowser)
732 XGUI_ObjectsBrowser* aOB = dynamic_cast<XGUI_ObjectsBrowser*>(theObjectBrowser);
734 QLineEdit* aLabel = aOB->activeDocLabel();
735 QPalette aPalet = aLabel->palette();
736 aPalet.setColor(QPalette::Text, QColor(0, 72, 140));
737 aLabel->setPalette(aPalet);
738 aOB->treeView()->setExpandsOnDoubleClick(false);
739 connect(aOB->treeView(), SIGNAL(doubleClicked(const QModelIndex&)),
740 SLOT(onTreeViewDoubleClick(const QModelIndex&)));
741 connect(aOB, SIGNAL(headerMouseDblClicked(const QModelIndex&)),
742 SLOT(onTreeViewDoubleClick(const QModelIndex&)));
743 connect(aOB->treeView(), SIGNAL(doubleClicked(const QModelIndex&)),
744 myDataModel, SLOT(onMouseDoubleClick(const QModelIndex&)));
749 void PartSet_Module::addObjectBrowserMenu(QMenu* theMenu) const
751 QObjectPtrList aObjects = myWorkshop->selection()->selectedObjects();
752 int aSelected = aObjects.size();
753 SessionPtr aMgr = ModelAPI_Session::get();
754 if (aSelected == 1) {
755 bool hasResult = false;
756 bool hasFeature = false;
757 bool hasParameter = false;
758 ModuleBase_Tools::checkObjects(aObjects, hasResult, hasFeature, hasParameter);
760 ObjectPtr aObject = aObjects.first();
762 ResultPartPtr aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aObject);
763 FeaturePtr aPartFeature = std::dynamic_pointer_cast<ModelAPI_Feature>(aObject);
764 bool isPart = aPart.get() ||
765 (aPartFeature.get() && (aPartFeature->getKind() == PartSetPlugin_Part::ID()));
767 DocumentPtr aPartDoc;
769 aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aPartFeature->firstResult());
771 if (aPart.get()) // this may be null is Part feature is disabled
772 aPartDoc = aPart->partDoc();
773 if (aMgr->activeDocument() == aPartDoc)
774 theMenu->addAction(myMenuMgr->action("DEACTIVATE_PART_CMD"));
776 theMenu->addAction(myMenuMgr->action("ACTIVATE_PART_CMD"));
777 } else if (aObject->document() == aMgr->activeDocument()) {
778 if (hasParameter || hasFeature)
779 theMenu->addAction(myMenuMgr->action("EDIT_CMD"));
781 } else { // If feature is 0 the it means that selected root object (document)
782 if (aMgr->activeDocument() != aMgr->moduleDocument())
783 theMenu->addAction(myMenuMgr->action("ACTIVATE_PARTSET_CMD"));
785 } else if (aSelected == 0) {
786 // if there is no selection then it means that upper label is selected
787 QModelIndexList aIndexes = myWorkshop->selection()->selectedIndexes();
788 if (aIndexes.size() == 0) // it means that selection happens in top label outside of tree view
789 if (aMgr->activeDocument() != aMgr->moduleDocument())
790 theMenu->addAction(myMenuMgr->action("ACTIVATE_PARTSET_CMD"));
794 void PartSet_Module::processEvent(const std::shared_ptr<Events_Message>& theMessage)
796 if (theMessage->eventID() == Events_Loop::loop()->eventByName(EVENT_DOCUMENT_CHANGED)) {
797 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(myWorkshop);
798 XGUI_Workshop* aWorkshop = aConnector->workshop();
799 XGUI_DataTree* aTreeView = aWorkshop->objectBrowser()->treeView();
800 QLineEdit* aLabel = aWorkshop->objectBrowser()->activeDocLabel();
801 QPalette aPalet = aLabel->palette();
803 SessionPtr aMgr = ModelAPI_Session::get();
804 DocumentPtr aActiveDoc = aMgr->activeDocument();
805 DocumentPtr aDoc = aMgr->moduleDocument();
806 QModelIndex aOldIndex = myDataModel->activePartTree();
807 if (aActiveDoc == aDoc) {
808 if (aOldIndex.isValid())
809 aTreeView->setExpanded(aOldIndex, false);
810 myDataModel->deactivatePart();
811 aPalet.setColor(QPalette::Text, QColor(0, 72, 140));
813 std::string aGrpName = ModelAPI_ResultPart::group();
814 for (int i = 0; i < aDoc->size(aGrpName); i++) {
815 ResultPartPtr aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aDoc->object(aGrpName, i));
816 if (aPart->partDoc() == aActiveDoc) {
817 QModelIndex aIndex = myDataModel->partIndex(aPart);
818 if (myDataModel->activatePart(aIndex)) {
819 if (aOldIndex.isValid())
820 aTreeView->setExpanded(aOldIndex, false);
821 aTreeView->setExpanded(myDataModel->activePartTree(), true);
822 aPalet.setColor(QPalette::Text, Qt::black);
828 aLabel->setPalette(aPalet);
829 aWorkshop->updateCommandStatus();
831 // Update displayed objects in order to update active color
832 XGUI_Displayer* aDisplayer = aWorkshop->displayer();
833 QObjectPtrList aObjects = aDisplayer->displayedObjects();
834 foreach(ObjectPtr aObj, aObjects)
835 aDisplayer->redisplay(aObj, false);
836 aDisplayer->updateViewer();
840 void PartSet_Module::onTreeViewDoubleClick(const QModelIndex& theIndex)
842 SessionPtr aMgr = ModelAPI_Session::get();
843 if (!theIndex.isValid()) {
844 aMgr->setActiveDocument(aMgr->moduleDocument());
847 if (theIndex.column() != 0) // Use only first column
849 ObjectPtr aObj = myDataModel->object(theIndex);
850 ResultPartPtr aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aObj);
851 if (!aPart.get()) { // Probably this is Feature
852 FeaturePtr aPartFeature = std::dynamic_pointer_cast<ModelAPI_Feature>(aObj);
853 if (aPartFeature.get() && (aPartFeature->getKind() == PartSetPlugin_Part::ID())) {
854 aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aPartFeature->firstResult());
857 if (aPart.get()) { // if this is a part
858 if (aPart->partDoc() == aMgr->activeDocument()) {
859 aMgr->setActiveDocument(aMgr->moduleDocument());