1 // Copyright (C) 2014-20xx CEA/DEN, EDF R&D
3 #include "PartSet_Module.h"
4 #include "PartSet_WidgetSketchLabel.h"
5 #include "PartSet_Validators.h"
6 #include "PartSet_Tools.h"
7 #include "PartSet_PreviewPlanes.h"
8 #include "PartSet_WidgetPoint2d.h"
9 #include "PartSet_WidgetPoint2dDistance.h"
10 #include "PartSet_WidgetPoint2DFlyout.h"
11 #include "PartSet_WidgetShapeSelector.h"
12 #include "PartSet_WidgetMultiSelector.h"
13 #include "PartSet_WidgetEditor.h"
14 #include "PartSet_WidgetFileSelector.h"
15 #include "PartSet_WidgetSketchCreator.h"
16 #include "PartSet_SketcherMgr.h"
17 #include "PartSet_SketcherReetntrantMgr.h"
18 #include "PartSet_ResultSketchPrs.h"
19 #include "PartSet_MenuMgr.h"
20 #include "PartSet_CustomPrs.h"
21 #include "PartSet_IconFactory.h"
22 #include "PartSet_WidgetChoice.h"
23 #include "PartSet_OverconstraintListener.h"
25 #include "PartSet_Filters.h"
26 #include "PartSet_FilterInfinite.h"
28 #include <PartSetPlugin_Remove.h>
29 #include <PartSetPlugin_Part.h>
30 #include <PartSetPlugin_Duplicate.h>
32 #include <ModuleBase_Operation.h>
33 #include <ModuleBase_OperationAction.h>
34 #include <ModuleBase_IViewer.h>
35 #include <ModuleBase_IViewWindow.h>
36 #include <ModuleBase_IPropertyPanel.h>
37 #include <ModuleBase_WidgetEditor.h>
38 #include <ModuleBase_WidgetValidated.h>
39 #include <ModuleBase_FilterFactory.h>
40 #include <ModuleBase_Tools.h>
41 #include <ModuleBase_OperationFeature.h>
42 #include <ModuleBase_WidgetFactory.h>
43 #include <ModuleBase_OperationDescription.h>
44 #include <ModuleBase_ViewerPrs.h>
46 #include <ModelAPI_Object.h>
47 #include <ModelAPI_Events.h>
48 #include <ModelAPI_Validator.h>
49 #include <ModelAPI_Data.h>
50 #include <ModelAPI_Session.h>
51 #include <ModelAPI_ResultBody.h>
52 #include <ModelAPI_AttributeString.h>
53 #include <ModelAPI_AttributeSelectionList.h>
54 #include <ModelAPI_Tools.h>
56 #include <GeomDataAPI_Point2D.h>
57 #include <GeomDataAPI_Point.h>
58 #include <GeomDataAPI_Dir.h>
60 #include <XGUI_Displayer.h>
61 #include <XGUI_Workshop.h>
62 #include <XGUI_OperationMgr.h>
63 #include <XGUI_PropertyPanel.h>
64 #include <XGUI_ModuleConnector.h>
65 #include <XGUI_ContextMenuMgr.h>
66 #include <XGUI_Tools.h>
67 #include <XGUI_ObjectsBrowser.h>
68 #include <XGUI_SelectionMgr.h>
69 #include <XGUI_DataModel.h>
70 #include <XGUI_ErrorMgr.h>
71 #include <XGUI_CustomPrs.h>
72 #include <XGUI_SelectionMgr.h>
73 #include <XGUI_ActionsMgr.h>
75 #include <SketchPlugin_Feature.h>
76 #include <SketchPlugin_Sketch.h>
77 #include <SketchPlugin_ConstraintAngle.h>
78 #include <SketchPlugin_ConstraintLength.h>
79 #include <SketchPlugin_ConstraintDistance.h>
80 #include <SketchPlugin_ConstraintParallel.h>
81 #include <SketchPlugin_ConstraintPerpendicular.h>
82 #include <SketchPlugin_ConstraintRadius.h>
84 #include <SketcherPrs_SymbolPrs.h>
85 #include <SketcherPrs_Coincident.h>
86 #include <SketcherPrs_Tools.h>
88 #include <Events_Loop.h>
89 #include <Config_PropManager.h>
90 #include <Config_Keywords.h>
92 #include <StdSelect_TypeOfFace.hxx>
93 #include <TopoDS_Vertex.hxx>
95 #include <TopoDS_Shape.hxx>
96 #include <BRep_Tool.hxx>
97 #include <AIS_Dimension.hxx>
100 #include <QMouseEvent>
103 #include <QApplication>
104 #include <QMessageBox>
105 #include <QMainWindow>
109 #include <GeomAlgoAPI_FaceBuilder.h>
110 #include <GeomDataAPI_Dir.h>
112 #include <SelectMgr_ListIteratorOfListOfFilter.hxx>
118 /*!Create and return new instance of XGUI_Module*/
119 extern "C" PARTSET_EXPORT ModuleBase_IModule* createModule(ModuleBase_IWorkshop* theWshop)
121 return new PartSet_Module(theWshop);
124 PartSet_Module::PartSet_Module(ModuleBase_IWorkshop* theWshop)
125 : ModuleBase_IModule(theWshop),
128 new PartSet_IconFactory();
130 mySketchMgr = new PartSet_SketcherMgr(this);
131 mySketchReentrantMgr = new PartSet_SketcherReetntrantMgr(theWshop);
133 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(theWshop);
134 XGUI_Workshop* aWorkshop = aConnector->workshop();
136 ModuleBase_IViewer* aViewer = theWshop->viewer();
137 connect(aViewer, SIGNAL(keyRelease(ModuleBase_IViewWindow*, QKeyEvent*)),
138 this, SLOT(onKeyRelease(ModuleBase_IViewWindow*, QKeyEvent*)));
139 connect(aViewer, SIGNAL(viewTransformed(int)),
140 SLOT(onViewTransformed(int)));
141 connect(aViewer, SIGNAL(viewCreated(ModuleBase_IViewWindow*)),
142 SLOT(onViewCreated(ModuleBase_IViewWindow*)));
143 myMenuMgr = new PartSet_MenuMgr(this);
144 myCustomPrs = new PartSet_CustomPrs(theWshop);
146 myOverconstraintListener = new PartSet_OverconstraintListener(theWshop);
148 Events_Loop* aLoop = Events_Loop::loop();
149 aLoop->registerListener(this, Events_Loop::eventByName(EVENT_DOCUMENT_CHANGED));
151 mySelectionFilters.Append(new PartSet_GlobalFilter(myWorkshop));
152 mySelectionFilters.Append(new PartSet_FilterInfinite(myWorkshop));
154 setDefaultConstraintShown();
156 Config_PropManager::registerProp("Visualization", "operation_parameter_color",
157 "Reference shape wireframe color in operation", Config_Prop::Color,
158 PartSet_CustomPrs::OPERATION_PARAMETER_COLOR());
159 Config_PropManager::registerProp("Visualization", "operation_result_color",
160 "Result shape wireframe color in operation", Config_Prop::Color,
161 PartSet_CustomPrs::OPERATION_RESULT_COLOR());
162 Config_PropManager::registerProp("Visualization", "operation_highlight_color",
163 "Multi selector item color in operation", Config_Prop::Color,
164 PartSet_CustomPrs::OPERATION_HIGHLIGHT_COLOR());
167 Config_PropManager::registerProp("Sketch planes", "disable_input_fields", "Disable input fields",
168 Config_Prop::Boolean, "true");
171 PartSet_Module::~PartSet_Module()
173 SelectMgr_ListIteratorOfListOfFilter aIt(mySelectionFilters);
174 for (; aIt.More(); aIt.Next()) {
175 Handle(SelectMgr_Filter) aFilter = aIt.Value();
176 if (!aFilter.IsNull())
180 delete myOverconstraintListener;
183 void PartSet_Module::activateSelectionFilters()
185 SelectMgr_ListIteratorOfListOfFilter aIt(mySelectionFilters);
186 for (; aIt.More(); aIt.Next()) {
187 Handle(SelectMgr_Filter) aFilter = aIt.Value();
188 if (!aFilter.IsNull())
189 myWorkshop->viewer()->addSelectionFilter(aFilter);
193 void PartSet_Module::deactivateSelectionFilters()
195 SelectMgr_ListIteratorOfListOfFilter aIt(mySelectionFilters);
196 for (; aIt.More(); aIt.Next()) {
197 Handle(SelectMgr_Filter) aFilter = aIt.Value();
198 if (!aFilter.IsNull())
199 myWorkshop->viewer()->removeSelectionFilter(aFilter);
203 void PartSet_Module::storeSelection()
205 sketchMgr()->storeSelection();
208 void PartSet_Module::restoreSelection()
210 sketchMgr()->restoreSelection();
213 void PartSet_Module::registerValidators()
215 //Registering of validators
216 SessionPtr aMgr = ModelAPI_Session::get();
217 ModelAPI_ValidatorsFactory* aFactory = aMgr->validators();
218 aFactory->registerValidator("PartSet_DistanceSelection", new PartSet_DistanceSelection);
219 aFactory->registerValidator("PartSet_LengthSelection", new PartSet_LengthSelection);
220 aFactory->registerValidator("PartSet_PerpendicularSelection", new PartSet_PerpendicularSelection);
221 aFactory->registerValidator("PartSet_ParallelSelection", new PartSet_ParallelSelection);
222 aFactory->registerValidator("PartSet_RadiusSelection", new PartSet_RadiusSelection);
223 aFactory->registerValidator("PartSet_RigidSelection", new PartSet_RigidSelection);
224 aFactory->registerValidator("PartSet_CoincidentSelection", new PartSet_CoincidentSelection);
225 aFactory->registerValidator("PartSet_HVDirSelection", new PartSet_HVDirSelection);
226 aFactory->registerValidator("PartSet_TangentSelection", new PartSet_TangentSelection);
227 aFactory->registerValidator("PartSet_FilletSelection", new PartSet_FilletSelection);
228 aFactory->registerValidator("PartSet_AngleSelection", new PartSet_AngleSelection);
229 aFactory->registerValidator("PartSet_EqualSelection", new PartSet_EqualSelection);
230 aFactory->registerValidator("PartSet_CollinearSelection", new PartSet_CollinearSelection);
231 aFactory->registerValidator("PartSet_MiddlePointSelection", new PartSet_MiddlePointSelection);
232 aFactory->registerValidator("PartSet_DifferentObjects", new PartSet_DifferentObjectsValidator);
233 aFactory->registerValidator("PartSet_CoincidentAttr", new PartSet_CoincidentAttr);
236 void PartSet_Module::registerFilters()
238 //Registering of selection filters
239 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
240 ModuleBase_FilterFactory* aFactory = aConnector->selectionFilters();
243 void PartSet_Module::registerProperties()
245 Config_PropManager::registerProp("Sketch planes", "planes_size", "Size", Config_Prop::Double,
247 Config_PropManager::registerProp("Sketch planes", "planes_thickness", "Thickness",
248 Config_Prop::Integer, SKETCH_WIDTH);
249 Config_PropManager::registerProp("Sketch planes", "rotate_to_plane", "Rotate to plane when selected",
250 Config_Prop::Boolean, "false");
253 void PartSet_Module::connectToPropertyPanel(ModuleBase_ModelWidget* theWidget, const bool isToConnect)
255 mySketchMgr->connectToPropertyPanel(theWidget, isToConnect);
258 void PartSet_Module::operationCommitted(ModuleBase_Operation* theOperation)
260 if (PartSet_SketcherMgr::isNestedSketchOperation(theOperation)) {
261 mySketchMgr->commitNestedSketch(theOperation);
264 /// Restart sketcher operations automatically
265 if (!mySketchReentrantMgr->operationCommitted(theOperation)) {
267 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>(theOperation);
268 if (aFOperation && !aFOperation->isEditOperation()) {
269 // the selection is cleared after commit the create operation
270 // in order to do not use the same selected objects in the restarted operation
271 // for common behaviour, the selection is cleared even if the operation is not restarted
272 getWorkshop()->selector()->clearSelection();
277 void PartSet_Module::operationAborted(ModuleBase_Operation* theOperation)
279 /// Restart sketcher operations automatically
280 mySketchReentrantMgr->operationAborted(theOperation);
283 void PartSet_Module::operationStarted(ModuleBase_Operation* theOperation)
285 ModuleBase_IWorkshop* anIWorkshop = workshop();
286 if (!theOperation->getDescription()->hasXmlRepresentation()) { //!< No need for property panel
287 anIWorkshop->updateCommandStatus();
290 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>
293 XGUI_Workshop* aWorkshop = XGUI_Tools::workshop(anIWorkshop);
294 XGUI_PropertyPanel* aPropertyPanel = aWorkshop->propertyPanel();
295 ModuleBase_ModelWidget* aFilledWidget = 0;
296 bool aPostonedWidgetActivation = false;
297 FeaturePtr aFeature = aFOperation->feature();
299 std::string aGreedAttributeId = ModuleBase_Tools::findGreedAttribute(anIWorkshop, aFeature);
300 // if there is a greed attribute, automatic commit by preselection for this feature is prohibited
301 aWorkshop->setPropertyPanel(aFOperation);
303 // filling the operation values by the current selection
304 // if the operation can be committed after the controls filling, the method perform should
305 // be stopped. Otherwise unnecessary presentations can be shown(e.g. operation prs in sketch)
306 bool isOperationCommitted = false;
307 if (!aFOperation->isEditOperation()) {
308 aFilledWidget = aFOperation->activateByPreselection(aGreedAttributeId);
309 if (currentOperation() != aFOperation)
310 isOperationCommitted = true;
312 if (aGreedAttributeId.empty()) {
313 // a signal should be emitted before the next widget activation
314 // because, the activation of the next widget will give a focus to the widget. As a result
315 // the value of the widget is initialized. And commit may happens until the value is entered.
317 if (mySketchReentrantMgr->canBeCommittedByPreselection())
318 isOperationCommitted = mySketchMgr->operationActivatedByPreselection();
319 // activate the next obligatory widget
320 if (!isOperationCommitted)
321 aPropertyPanel->activateNextWidget(aFilledWidget);
324 else { // there is a greed widget
325 const QList<ModuleBase_ModelWidget*>& aWidgets = aPropertyPanel->modelWidgets();
326 std::string aFirstAttributeId = aWidgets.front()->attributeID();
327 // activate next widget after greeded if it is the first widget in the panel
328 // else the first panel widget is already activated by operation start
329 if (aFirstAttributeId == aGreedAttributeId)
330 aPostonedWidgetActivation = true;
333 } if (!isOperationCommitted) {
334 anIWorkshop->updateCommandStatus();
335 aWorkshop->connectToPropertyPanel(true);
336 operationStartedInternal(aFOperation);
338 // the objects of the current operation should be deactivated
339 QObjectPtrList anObjects;
340 anObjects.append(aFeature);
341 std::list<ResultPtr> aResults;
342 ModelAPI_Tools::allResults(aFeature, aResults);
343 std::list<ResultPtr>::const_iterator aIt;
344 for (aIt = aResults.begin(); aIt != aResults.end(); ++aIt) {
345 anObjects.append(*aIt);
347 QObjectPtrList::const_iterator anIt = anObjects.begin(), aLast = anObjects.end();
348 for (; anIt != aLast; anIt++)
349 aWorkshop->deactivateActiveObject(*anIt, false);
350 if (anObjects.size() > 0) {
351 XGUI_Displayer* aDisplayer = aWorkshop->displayer();
352 aDisplayer->updateViewer();
355 if (aPostonedWidgetActivation) {
356 // if the widget is an empty in the chain of activated widgets, the current operation
357 // is restarted. It should be performed after functionality of the operation starting
358 aPropertyPanel->activateNextWidget(aFilledWidget);
364 void PartSet_Module::operationStartedInternal(ModuleBase_Operation* theOperation)
366 /// Restart sketcher operations automatically
367 mySketchReentrantMgr->operationStarted(theOperation);
369 if (PartSet_SketcherMgr::isSketchOperation(theOperation)) {
370 mySketchMgr->startSketch(theOperation);
372 else if (PartSet_SketcherMgr::isNestedSketchOperation(theOperation)) {
373 mySketchMgr->startNestedSketch(theOperation);
376 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>(theOperation);
378 myCustomPrs->activate(aFOperation->feature(), ModuleBase_IModule::CustomizeArguments, true);
379 myCustomPrs->activate(aFOperation->feature(), ModuleBase_IModule::CustomizeResults, true);
383 void PartSet_Module::operationResumed(ModuleBase_Operation* theOperation)
385 ModuleBase_IModule::operationResumed(theOperation);
387 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>(theOperation);
389 myCustomPrs->activate(aFOperation->feature(), ModuleBase_IModule::CustomizeArguments, true);
390 myCustomPrs->activate(aFOperation->feature(), ModuleBase_IModule::CustomizeResults, true);
394 void PartSet_Module::operationStopped(ModuleBase_Operation* theOperation)
396 bool isModifiedArgs = myCustomPrs->deactivate(ModuleBase_IModule::CustomizeArguments, false);
397 bool isModifiedResults = myCustomPrs->deactivate(ModuleBase_IModule::CustomizeResults, false);
398 bool isModified = isModifiedArgs || isModifiedResults;
400 if (PartSet_SketcherMgr::isNestedSketchOperation(theOperation)) {
401 mySketchMgr->stopNestedSketch(theOperation);
403 else if (PartSet_SketcherMgr::isSketchOperation(theOperation))
404 setDefaultConstraintShown();
406 //VSV: Viewer is updated on feature update and redisplay
408 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(myWorkshop);
409 XGUI_Displayer* aDisplayer = aConnector->workshop()->displayer();
410 aDisplayer->updateViewer();
413 QMap<PartSet_Tools::ConstraintVisibleState, bool>::const_iterator anIt = myHasConstraintShown.begin(),
414 aLast = myHasConstraintShown.end();
415 for (; anIt != aLast; anIt++) {
416 mySketchMgr->updateBySketchParameters(anIt.key(), anIt.value());
420 ModuleBase_Operation* PartSet_Module::currentOperation() const
422 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
423 XGUI_OperationMgr* anOpMgr = aConnector->workshop()->operationMgr();
424 return anOpMgr->currentOperation();
427 bool PartSet_Module::canUndo() const
429 bool aCanUndo = false;
430 SessionPtr aMgr = ModelAPI_Session::get();
431 if (aMgr->hasModuleDocument() && aMgr->canUndo()) {
432 aCanUndo = !aMgr->isOperation();
433 if (!aCanUndo) // check the enable state additionally by sketch manager
434 aCanUndo = aMgr->canUndo();
439 bool PartSet_Module::canRedo() const
441 bool aCanRedo = false;
442 SessionPtr aMgr = ModelAPI_Session::get();
443 if (aMgr->hasModuleDocument() && aMgr->canRedo()) {
444 aCanRedo = !aMgr->isOperation();
445 if (!aCanRedo) // check the enable state additionally by sketch manager
446 aCanRedo = aMgr->canRedo();
451 bool PartSet_Module::canApplyAction(const ObjectPtr& theObject, const QString& theActionId) const
454 if (theActionId == "MOVE_CMD") {
455 FeaturePtr aFeature = ModelAPI_Feature::feature(theObject);
457 ResultPtr aResult = ModuleBase_Tools::firstResult(aFeature);
458 // part features can not be moved in the history.
459 if (aResult.get() && aResult->groupName() == ModelAPI_ResultPart::group())
466 bool PartSet_Module::canEraseObject(const ObjectPtr& theObject) const
468 // the sketch manager put the restriction to the objects erase
469 return mySketchMgr->canEraseObject(theObject);
472 bool PartSet_Module::canDisplayObject(const ObjectPtr& theObject) const
474 // the sketch manager put the restriction to the objects display
475 return mySketchMgr->canDisplayObject(theObject);
478 /*void PartSet_Module::processHiddenObject(const std::list<ObjectPtr>& theObjects)
480 mySketchMgr->processHiddenObject(theObjects);
483 bool PartSet_Module::canActivateSelection(const ObjectPtr& theObject) const
485 bool aCanActivate = ModuleBase_IModule::canActivateSelection(theObject);
487 ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
488 bool isSketchOp = PartSet_SketcherMgr::isSketchOperation(anOperation),
489 isNestedOp = PartSet_SketcherMgr::isNestedSketchOperation(anOperation);
490 if (isSketchOp || isNestedOp) {
491 // in active sketch operation it is possible to activate operation object in selection
492 // in the edit operation, e.g. points of the line can be moved when the line is edited
493 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>(anOperation);
494 aCanActivate = aCanActivate || (aFOperation && aFOperation->isEditOperation());
499 bool PartSet_Module::addViewerMenu(const QMap<QString, QAction*>& theStdActions,
501 QMap<int, QAction*>& theMenuActions) const
503 return myMenuMgr->addViewerMenu(theStdActions, theParent, theMenuActions);
506 void PartSet_Module::updateViewerMenu(const QMap<QString, QAction*>& theStdActions)
508 myMenuMgr->updateViewerMenu(theStdActions);
511 bool PartSet_Module::isActionEnableStateFixed(const int theActionId) const
513 bool isEnabledFixed = false;
514 if (theActionId == XGUI_ActionsMgr::AcceptAll &&
515 mySketchReentrantMgr->isInternalEditStarted())
516 isEnabledFixed = true;
517 return isEnabledFixed;
520 QString PartSet_Module::getFeatureError(const FeaturePtr& theFeature)
522 QString anError = ModuleBase_IModule::getFeatureError(theFeature);
523 if (anError.isEmpty())
524 anError = sketchMgr()->getFeatureError(theFeature);
529 void PartSet_Module::grantedOperationIds(ModuleBase_Operation* theOperation,
530 QStringList& theIds) const
532 myMenuMgr->grantedOperationIds(theOperation, theIds);
534 if (PartSet_SketcherMgr::isSketchOperation(theOperation)) {
535 XGUI_Workshop* aWorkshop = getWorkshop();
536 theIds.append(aWorkshop->contextMenuMgr()->action("DELETE_CMD")->text());
540 void PartSet_Module::activeSelectionModes(QIntList& theModes)
543 if (mySketchMgr->activeSketch().get())
544 PartSet_SketcherMgr::sketchSelectionModes(theModes);
547 void PartSet_Module::customSubShapesSelectionModes(QIntList& theTypes)
549 if (theTypes.contains(TopAbs_FACE))
550 theTypes.append(SketcherPrs_Tools::Sel_Sketch_Face);
551 if (theTypes.contains(TopAbs_WIRE))
552 theTypes.append(SketcherPrs_Tools::Sel_Sketch_Wire);
555 bool PartSet_Module::isMouseOverWindow()
557 return mySketchMgr->isMouseOverWindow();
560 void PartSet_Module::closeDocument()
565 void PartSet_Module::clearViewer()
567 myCustomPrs->clearPrs();
569 XGUI_Workshop* aWorkshop = getWorkshop();
570 XGUI_Displayer* aDisplayer = aWorkshop->displayer();
571 aDisplayer->deactivateSelectionFilters();
574 void PartSet_Module::propertyPanelDefined(ModuleBase_Operation* theOperation)
576 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>(theOperation);
580 ModuleBase_IPropertyPanel* aPanel = aFOperation->propertyPanel();
581 // we have to manually activate the sketch label in edit mode
582 if (PartSet_SketcherMgr::isSketchOperation(aFOperation) && (aFOperation->isEditOperation()))
583 aPanel->activateWidget(aPanel->modelWidgets().first());
586 bool PartSet_Module::createWidgets(ModuleBase_Operation* theOperation,
587 QList<ModuleBase_ModelWidget*>& theWidgets) const
589 bool aProcessed = false;
591 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>(theOperation);
592 XGUI_Workshop* aWorkshop = getWorkshop();
593 XGUI_PropertyPanel* aPropertyPanel = aWorkshop->propertyPanel();
594 if (mySketchMgr->activeSketch().get() && aFOperation && aPropertyPanel) {
595 ModuleBase_ISelection* aSelection = workshop()->selection();
596 // click on a point in sketch leads here with the point is highlighted, not yet selected
597 QList<ModuleBase_ViewerPrsPtr> aPreselection = aSelection->getHighlighted();
598 if (aPreselection.size() == 1) {
599 ModuleBase_ViewerPrsPtr aSelectedPrs = aPreselection[0];
600 ObjectPtr anObject = aSelectedPrs->object();
602 FeaturePtr aFeature = ModelAPI_Feature::feature(anObject);
603 FeaturePtr anOpFeature = aFOperation->feature();
604 GeomShapePtr aShape = aSelectedPrs->shape();
605 // click on the digit of dimension constrain comes here with an empty shape, so we need the check
606 if (aFeature == anOpFeature && aShape.get() && !aShape->isNull()) {
607 const TopoDS_Shape& aTDShape = aShape->impl<TopoDS_Shape>();
608 AttributePtr anAttribute = PartSet_Tools::findAttributeBy2dPoint(anObject, aTDShape,
609 mySketchMgr->activeSketch());
610 if (anAttribute.get()) {
611 QString aXmlRepr = aFOperation->getDescription()->xmlRepresentation();
612 ModuleBase_WidgetFactory aFactory(aXmlRepr.toStdString(), workshop());
614 const std::string anAttributeId = anAttribute->id();
615 aFactory.createWidget(aPropertyPanel->contentWidget(), anAttributeId);
617 theWidgets = aFactory.getModelWidgets();
618 // it is possible that the point does not present in XML definition,
619 // in this case, we assume that it is not processed by this module
620 // e.g. "Intersection point" feature
621 aProcessed = !theWidgets.isEmpty();
629 void PartSet_Module::onSelectionChanged()
631 ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
635 bool isSketcherOp = false;
636 // An edit operation is enable only if the current opeation is the sketch operation
637 if (mySketchMgr->activeSketch()) {
638 if (PartSet_Tools::sketchPlane(mySketchMgr->activeSketch()))
639 isSketcherOp = PartSet_SketcherMgr::isSketchOperation(aOperation);
642 // Editing of constraints can be done on selection
643 ModuleBase_ISelection* aSelect = myWorkshop->selection();
644 QList<ModuleBase_ViewerPrsPtr> aSelected = aSelect->getSelected();
645 if (aSelected.size() == 1) {
646 ModuleBase_ViewerPrsPtr aPrs = aSelected.first();
647 ObjectPtr aObject = aPrs->object();
648 FeaturePtr aFeature = ModelAPI_Feature::feature(aObject);
650 std::string aId = aFeature->getKind();
651 if ((aId == SketchPlugin_ConstraintRadius::ID()) ||
652 (aId == SketchPlugin_ConstraintLength::ID()) ||
653 (aId == SketchPlugin_ConstraintDistance::ID()) ||
654 (aId == SketchPlugin_ConstraintAngle::ID())) {
655 editFeature(aFeature);
662 void PartSet_Module::onKeyRelease(ModuleBase_IViewWindow* theWnd, QKeyEvent* theEvent)
664 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
665 XGUI_OperationMgr* anOpMgr = aConnector->workshop()->operationMgr();
666 anOpMgr->onKeyReleased(theWnd->viewPort(), theEvent);
669 ModuleBase_ModelWidget* PartSet_Module::createWidgetByType(const std::string& theType,
671 Config_WidgetAPI* theWidgetApi)
673 ModuleBase_IWorkshop* aWorkshop = workshop();
674 XGUI_Workshop* aXUIWorkshop = getWorkshop();
675 ModuleBase_ModelWidget* aWgt = NULL;
676 if (theType == "sketch-start-label") {
677 PartSet_WidgetSketchLabel* aLabelWgt = new PartSet_WidgetSketchLabel(theParent, aWorkshop,
678 theWidgetApi, myHasConstraintShown);
679 connect(aLabelWgt, SIGNAL(planeSelected(const std::shared_ptr<GeomAPI_Pln>&)),
680 mySketchMgr, SLOT(onPlaneSelected(const std::shared_ptr<GeomAPI_Pln>&)));
681 connect(aLabelWgt, SIGNAL(showConstraintToggled(int, bool)),
682 mySketchMgr, SLOT(onShowConstraintsToggle(int, bool)));
684 } else if (theType == "sketch-2dpoint_selector") {
685 PartSet_WidgetPoint2D* aPointWgt = new PartSet_WidgetPoint2D(theParent, aWorkshop,
687 aPointWgt->setSketch(mySketchMgr->activeSketch());
688 connect(aPointWgt, SIGNAL(vertexSelected()), sketchReentranceMgr(), SLOT(onVertexSelected()));
690 }else if (theType == "sketch-2dpoint_flyout_selector") {
691 PartSet_WidgetPoint2DFlyout* aPointWgt = new PartSet_WidgetPoint2DFlyout(theParent, aWorkshop,
693 aPointWgt->setSketch(mySketchMgr->activeSketch());
694 connect(aPointWgt, SIGNAL(vertexSelected()), sketchReentranceMgr(), SLOT(onVertexSelected()));
696 } else if (theType == "point2ddistance") {
697 PartSet_WidgetPoint2dDistance* aDistanceWgt = new PartSet_WidgetPoint2dDistance(theParent,
698 aWorkshop, theWidgetApi);
699 aDistanceWgt->setSketch(mySketchMgr->activeSketch());
701 } else if (theType == "sketch_shape_selector") {
702 PartSet_WidgetShapeSelector* aShapeSelectorWgt =
703 new PartSet_WidgetShapeSelector(theParent, aWorkshop, theWidgetApi);
704 aShapeSelectorWgt->setSketcher(mySketchMgr->activeSketch());
705 aWgt = aShapeSelectorWgt;
706 } else if (theType == "sketch_multi_selector") {
707 PartSet_WidgetMultiSelector* aShapeSelectorWgt =
708 new PartSet_WidgetMultiSelector(theParent, aWorkshop, theWidgetApi);
709 aShapeSelectorWgt->setSketcher(mySketchMgr->activeSketch());
710 aWgt = aShapeSelectorWgt;
712 else if (theType == WDG_DOUBLEVALUE_EDITOR) {
713 aWgt = new PartSet_WidgetEditor(theParent, aWorkshop, theWidgetApi);
714 } else if (theType == "export_file_selector") {
715 aWgt = new PartSet_WidgetFileSelector(theParent, aWorkshop, theWidgetApi);
716 } else if (theType == "sketch_launcher") {
717 aWgt = new PartSet_WidgetSketchCreator(theParent, this, theWidgetApi);
718 } else if (theType == "module_choice") {
719 aWgt = new PartSet_WidgetChoice(theParent, theWidgetApi);
720 connect(aWgt, SIGNAL(itemSelected(ModuleBase_ModelWidget*, int)),
721 this, SLOT(onChoiceChanged(ModuleBase_ModelWidget*, int)));
726 ModuleBase_ModelWidget* PartSet_Module::activeWidget() const
728 ModuleBase_ModelWidget* anActiveWidget = 0;
730 anActiveWidget = mySketchReentrantMgr->internalActiveWidget();
731 if (!anActiveWidget) {
732 ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
734 ModuleBase_IPropertyPanel* aPanel = aOperation->propertyPanel();
735 anActiveWidget = aPanel->activeWidget();
738 return anActiveWidget;
741 bool PartSet_Module::deleteObjects()
743 bool isProcessed = false;
745 XGUI_Workshop* aWorkshop = getWorkshop();
746 XGUI_OperationMgr* anOpMgr = aWorkshop->operationMgr();
748 //SessionPtr aMgr = ModelAPI_Session::get();
749 // 1. check whether the delete should be processed in the module
750 ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
751 bool isSketchOp = PartSet_SketcherMgr::isSketchOperation(anOperation),
752 isNestedOp = PartSet_SketcherMgr::isNestedSketchOperation(anOperation);
753 if (isSketchOp || isNestedOp) {
755 // 2. find selected presentations
756 // selected objects should be collected before the current operation abort because
757 // the abort leads to selection lost on constraint objects. It can be corrected after #386 issue
758 ModuleBase_ISelection* aSel = workshop()->selection();
759 QObjectPtrList aSelectedObj = aSel->selectedPresentations();
760 // if there are no selected objects in the viewer, that means that the selection in another
761 // place cased this method. It is necessary to return the false value to understande in above
762 // method that delete is not processed
763 if (aSelectedObj.count() == 0)
766 // avoid delete of the objects, which are not belong to the current sketch
767 // in order to do not delete results of other sketches
768 QObjectPtrList aSketchObjects;
769 QObjectPtrList::const_iterator anIt = aSelectedObj.begin(), aLast = aSelectedObj.end();
770 for ( ; anIt != aLast; anIt++) {
771 ObjectPtr anObject = *anIt;
772 if (mySketchMgr->isObjectOfSketch(anObject)) {
773 // sketch feature should be used in this list because workshop deletes features only
774 // results are skipped
775 FeaturePtr aSketchFeature = ModelAPI_Feature::feature(anObject);
776 aSketchObjects.append(aSketchFeature);
779 // if the selection contains only local selected presentations from other sketches,
780 // the Delete operation should not be done at all
781 if (aSketchObjects.size() == 0)
784 // 3. start operation
785 QString aDescription = aWorkshop->contextMenuMgr()->action("DELETE_CMD")->text();
786 ModuleBase_OperationAction* anOpAction = new ModuleBase_OperationAction(aDescription, this);
788 // the active nested sketch operation should be aborted unconditionally
789 // the Delete action should be additionally granted for the Sketch operation
790 // in order to do not abort/commit it
791 if (!anOpMgr->canStartOperation(anOpAction->id()))
792 return true; // the objects are processed but can not be deleted
794 anOpMgr->startOperation(anOpAction);
796 // WORKAROUND, should be done to avoid viewer highlight update after deletetion of objects
797 // the problem is in AIS Dimensions recompute if a line and the dim are removed, line is the first
798 // it causes the AIS recompute, where the base line is null, the result is empty AIS in the viewer
799 XGUI_Tools::workshop(myWorkshop)->selector()->clearSelection();
801 // 4. delete features
802 // sketch feature should be skipped, only sub-features can be removed
803 // when sketch operation is active
804 aWorkshop->deleteFeatures(aSketchObjects);
806 anOpMgr->commitOperation();
811 void PartSet_Module::onFeatureTriggered()
813 // is commented for imp: Unpressing the button of the current action must behave like
814 // a validation if the entity can be created (instead of Cancel, as currently)
815 /*QAction* aCmd = dynamic_cast<QAction*>(sender());
816 if (aCmd->isCheckable() && aCmd->isChecked()) {
817 // 1. check whether the delete should be processed in the module
818 ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
819 bool isNestedOp = PartSet_SketcherMgr::isNestedCreateOperation(anOperation);
821 // in case if in the viewer nothing is displayed, the create operation should not be
822 // comitted even if all values of the feature are initialized
823 if (!mySketchMgr->canDisplayCurrentCreatedFeature()) {
824 // the action information should be saved before the operation is aborted
825 // because this abort leads to update command status, which unchecks this action
826 anOperation->abort();
827 launchOperation(aCmd->data().toString());
831 ModuleBase_IModule::onFeatureTriggered();
834 void PartSet_Module::editFeature(FeaturePtr theFeature)
836 storeConstraintsState(theFeature->getKind());
837 ModuleBase_IModule::editFeature(theFeature);
840 bool PartSet_Module::canCommitOperation() const
845 void PartSet_Module::launchOperation(const QString& theCmdId,
846 const bool isUpdatePropertyPanel)
848 storeConstraintsState(theCmdId.toStdString());
849 updateConstraintsState(theCmdId.toStdString());
851 ModuleBase_IModule::launchOperation(theCmdId, isUpdatePropertyPanel);
854 void PartSet_Module::storeConstraintsState(const std::string& theFeatureKind)
856 if (myWorkshop->currentOperation() &&
857 myWorkshop->currentOperation()->id().toStdString() == SketchPlugin_Sketch::ID()) {
858 const QMap<PartSet_Tools::ConstraintVisibleState, bool>& aShownStates =
859 mySketchMgr->showConstraintStates();
860 myHasConstraintShown = aShownStates;
864 void PartSet_Module::updateConstraintsState(const std::string& theFeatureKind)
866 if (PartSet_SketcherMgr::constraintsIdList().contains(theFeatureKind.c_str()) ||
867 PartSet_SketcherMgr::replicationsIdList().contains(theFeatureKind.c_str())) {
868 // Show constraints if a constraint was anOperation
869 mySketchMgr->updateBySketchParameters(PartSet_Tools::Geometrical, true);
870 mySketchMgr->updateBySketchParameters(PartSet_Tools::Dimensional, true);
871 mySketchMgr->updateBySketchParameters(PartSet_Tools::Expressions,
872 myHasConstraintShown[PartSet_Tools::Expressions]);
876 void PartSet_Module::onObjectDisplayed(ObjectPtr theObject, AISObjectPtr theAIS)
878 Handle(AIS_InteractiveObject) anAIS = theAIS->impl<Handle(AIS_InteractiveObject)>();
879 if (!anAIS.IsNull()) {
880 Handle(AIS_InteractiveContext) aCtx = anAIS->GetContext();
881 Handle(AIS_Dimension) aDim = Handle(AIS_Dimension)::DownCast(anAIS);
882 if (!aDim.IsNull()) {
883 aCtx->SetZLayer(aDim, myVisualLayerId);
885 Handle(SketcherPrs_SymbolPrs) aCons = Handle(SketcherPrs_SymbolPrs)::DownCast(anAIS);
887 aCtx->SetZLayer(aCons, myVisualLayerId);
892 void PartSet_Module::onBeforeObjectErase(ObjectPtr theObject, AISObjectPtr theAIS)
895 // it should be recomputed in order to disappear in the viewer if the corresponded object
897 //if (myCustomPrs->isActive())
898 // myCustomPrs->redisplay(theObject, false);
901 void PartSet_Module::onViewTransformed(int theTrsfType)
903 // Set length of arrows constant in pixel size
904 // if the operation is panning or rotate or panglobal then do nothing
905 if ((theTrsfType == 1) || (theTrsfType == 3) || (theTrsfType == 4))
907 ModuleBase_IViewer* aViewer = myWorkshop->viewer();
908 Handle(AIS_InteractiveContext) aContext = aViewer->AISContext();
909 if (aContext.IsNull())
912 //Handle(V3d_View) aView = aViewer->activeView();
914 XGUI_Workshop* aWorkshop = getWorkshop();
915 XGUI_Displayer* aDisplayer = aWorkshop->displayer();
916 Handle(V3d_Viewer) aV3dViewer = aContext->CurrentViewer();
917 Handle(V3d_View) aView;
919 for (aV3dViewer->InitDefinedViews();
920 aV3dViewer->MoreDefinedViews();
921 aV3dViewer->NextDefinedViews()) {
922 Handle(V3d_View) aV = aV3dViewer->DefinedView();
923 double aS = aV->Scale();
931 double aLen = aView->Convert(SketcherPrs_Tools::getDefaultArrowSize());
933 double aPrevLen = SketcherPrs_Tools::getArrowSize();
934 SketcherPrs_Tools::setArrowSize(aLen);
935 const double aPrevScale = aViewer->Scale(aViewer->activeView());
936 const double aCurScale = aViewer->activeView()->Camera()->Scale();
937 aViewer->SetScale(aViewer->activeView(), aCurScale);
938 SketcherPrs_Tools::setTextHeight (aCurScale / aPrevScale * SketcherPrs_Tools::getTextHeight());
939 bool isModified = false;
940 QList<AISObjectPtr> aPrsList = aDisplayer->displayedPresentations();
941 foreach (AISObjectPtr aAIS, aPrsList) {
942 Handle(AIS_InteractiveObject) aAisObj = aAIS->impl<Handle(AIS_InteractiveObject)>();
944 Handle(AIS_Dimension) aDim = Handle(AIS_Dimension)::DownCast(aAisObj);
945 if (!aDim.IsNull()) {
946 aDim->DimensionAspect()->ArrowAspect()->SetLength(aLen);
947 aContext->Redisplay(aDim, false);
952 aDisplayer->updateViewer();
955 void PartSet_Module::activateCustomPrs(const FeaturePtr& theFeature, const ModuleBase_CustomizeFlag& theFlag,
956 const bool theUpdateViewer)
958 myCustomPrs->activate(theFeature, theFlag, theUpdateViewer);
961 void PartSet_Module::deactivateCustomPrs(const ModuleBase_CustomizeFlag& theFlag,
962 const bool theUpdateViewer)
964 myCustomPrs->deactivate(theFlag, theUpdateViewer);
967 bool PartSet_Module::customisePresentation(ResultPtr theResult, AISObjectPtr thePrs,
968 std::shared_ptr<GeomAPI_ICustomPrs> theCustomPrs)
970 bool aCustomized = false;
972 XGUI_Workshop* aWorkshop = getWorkshop();
973 XGUI_Displayer* aDisplayer = aWorkshop->displayer();
974 ObjectPtr anObject = aDisplayer->getObject(thePrs);
978 if (!theResult.get()) {
979 bool isConflicting = myOverconstraintListener->isConflictingObject(anObject);
980 // customize sketch symbol presentation
982 Handle(AIS_InteractiveObject) anAISIO = thePrs->impl<Handle(AIS_InteractiveObject)>();
983 if (!anAISIO.IsNull()) {
984 if (!Handle(SketcherPrs_SymbolPrs)::DownCast(anAISIO).IsNull()) {
985 Handle(SketcherPrs_SymbolPrs) aPrs = Handle(SketcherPrs_SymbolPrs)::DownCast(anAISIO);
986 if (!aPrs.IsNull()) {
987 std::vector<int> aColor;
988 myOverconstraintListener->getConflictingColor(aColor);
989 aPrs->SetConflictingConstraint(isConflicting, aColor);
992 } else if (!Handle(SketcherPrs_Coincident)::DownCast(anAISIO).IsNull()) {
993 Handle(SketcherPrs_Coincident) aPrs = Handle(SketcherPrs_Coincident)::DownCast(anAISIO);
994 if (!aPrs.IsNull()) {
995 std::vector<int> aColor;
996 myOverconstraintListener->getConflictingColor(aColor);
997 aPrs->SetConflictingConstraint(isConflicting, aColor);
1003 // customize sketch dimension constraint presentation
1005 std::vector<int> aColor;
1006 if (isConflicting) {
1007 myOverconstraintListener->getConflictingColor(aColor);
1010 XGUI_CustomPrs::getDefaultColor(anObject, true, aColor);
1011 if (!aColor.empty()) {
1012 aCustomized = thePrs->setColor(aColor[0], aColor[1], aColor[2]);
1016 // customize dimentional constrains
1017 sketchMgr()->customizePresentation(anObject);
1022 bool PartSet_Module::customizeObject(ObjectPtr theObject, const ModuleBase_CustomizeFlag& theFlag,
1023 const bool theUpdateViewer)
1025 bool isRedisplayed = false;
1026 if (myCustomPrs->isActive(theFlag))
1027 isRedisplayed = myCustomPrs->redisplay(theObject, theFlag, theUpdateViewer);
1029 return isRedisplayed;
1032 void PartSet_Module::customizeObjectBrowser(QWidget* theObjectBrowser)
1034 XGUI_ObjectsBrowser* aOB = dynamic_cast<XGUI_ObjectsBrowser*>(theObjectBrowser);
1036 QLabel* aLabel = aOB->activeDocLabel();
1037 aLabel->installEventFilter(myMenuMgr);
1038 connect(aLabel, SIGNAL(customContextMenuRequested(const QPoint&)),
1039 SLOT(onActiveDocPopup(const QPoint&)));
1040 //QPalette aPalet = aLabel->palette();
1041 //aPalet.setColor(QPalette::Text, QColor(0, 72, 140));
1042 //aLabel->setPalette(aPalet);
1043 aOB->treeView()->setExpandsOnDoubleClick(false);
1044 connect(aOB->treeView(), SIGNAL(doubleClicked(const QModelIndex&)),
1045 SLOT(onTreeViewDoubleClick(const QModelIndex&)));
1049 void PartSet_Module::onActiveDocPopup(const QPoint& thePnt)
1051 SessionPtr aMgr = ModelAPI_Session::get();
1052 QAction* aActivatePartAction = myMenuMgr->action("ACTIVATE_PARTSET_CMD");
1054 XGUI_Workshop* aWorkshop = getWorkshop();
1055 QLabel* aHeader = aWorkshop->objectBrowser()->activeDocLabel();
1057 aActivatePartAction->setEnabled((aMgr->activeDocument() != aMgr->moduleDocument()));
1060 aMenu.addAction(aActivatePartAction);
1061 aMenu.exec(aHeader->mapToGlobal(thePnt));
1064 Handle(AIS_InteractiveObject) PartSet_Module::createPresentation(const ResultPtr& theResult)
1066 return mySketchMgr->createPresentation(theResult);
1070 ObjectPtr PartSet_Module::findPresentedObject(const AISObjectPtr& theAIS) const
1073 ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
1075 /// If last line finished on vertex the lines creation sequence has to be break
1076 ModuleBase_IPropertyPanel* aPanel = aOperation->propertyPanel();
1078 ModuleBase_ModelWidget* anActiveWidget = aPanel->activeWidget();
1079 // if there is an active widget, find the presented object in it
1080 if (!anActiveWidget)
1081 anActiveWidget = aPanel->preselectionWidget();
1083 ModuleBase_WidgetValidated* aWidgetValidated = dynamic_cast<ModuleBase_WidgetValidated*>
1085 if (aWidgetValidated)
1086 anObject = aWidgetValidated->findPresentedObject(theAIS);
1092 bool PartSet_Module::canBeShaded(Handle(AIS_InteractiveObject) theAIS) const
1094 bool aCanBeShaged = true;
1096 Handle(PartSet_ResultSketchPrs) aPrs = Handle(PartSet_ResultSketchPrs)::DownCast(theAIS);
1098 aCanBeShaged = false;
1100 return aCanBeShaged;
1103 void PartSet_Module::addObjectBrowserMenu(QMenu* theMenu) const
1105 QObjectPtrList aObjects = myWorkshop->selection()->selectedObjects();
1106 int aSelected = aObjects.size();
1107 SessionPtr aMgr = ModelAPI_Session::get();
1108 QAction* aActivatePartAction = myMenuMgr->action("ACTIVATE_PART_CMD");
1110 ModuleBase_Operation* aCurrentOp = myWorkshop->currentOperation();
1111 if (aSelected == 1) {
1112 bool hasResult = false;
1113 bool hasFeature = false;
1114 bool hasParameter = false;
1115 bool hasCompositeOwner = false;
1116 ModuleBase_Tools::checkObjects(aObjects, hasResult, hasFeature, hasParameter,
1118 ObjectPtr aObject = aObjects.first();
1120 ResultPartPtr aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aObject);
1121 FeaturePtr aFeature = std::dynamic_pointer_cast<ModelAPI_Feature>(aObject);
1122 bool isPart = aPart.get() ||
1123 (aFeature.get() && (aFeature->getKind() == PartSetPlugin_Part::ID()));
1125 DocumentPtr aPartDoc;
1127 aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aFeature->firstResult());
1129 if (aPart.get()) // this may be null is Part feature is disabled
1130 aPartDoc = aPart->partDoc();
1132 theMenu->addAction(aActivatePartAction);
1133 aActivatePartAction->setEnabled((aMgr->activeDocument() != aPartDoc));
1135 } else if (aObject->document() == aMgr->activeDocument()) {
1136 if (hasParameter || hasFeature) {
1137 myMenuMgr->action("EDIT_CMD")->setEnabled(true);
1138 theMenu->addAction(myMenuMgr->action("EDIT_CMD"));
1139 if (aCurrentOp && aFeature.get()) {
1140 if (aCurrentOp->id().toStdString() == aFeature->getKind())
1141 myMenuMgr->action("EDIT_CMD")->setEnabled(false);
1146 ResultBodyPtr aResult = std::dynamic_pointer_cast<ModelAPI_ResultBody>(aObject);
1148 theMenu->addAction(myMenuMgr->action("SELECT_PARENT_CMD"));
1151 bool aNotDeactivate = (aCurrentOp == 0);
1152 if (!aNotDeactivate) {
1153 aActivatePartAction->setEnabled(false);
1157 void PartSet_Module::processEvent(const std::shared_ptr<Events_Message>& theMessage)
1159 if (theMessage->eventID() == Events_Loop::loop()->eventByName(EVENT_DOCUMENT_CHANGED)) {
1160 // Do not change activation of parts if an operation active
1161 static QStringList aAllowActivationList;
1162 if (aAllowActivationList.isEmpty())
1163 aAllowActivationList <<
1164 QString(PartSetPlugin_Part::ID().c_str()) <<
1165 QString(PartSetPlugin_Duplicate::ID().c_str()) <<
1166 QString(PartSetPlugin_Remove::ID().c_str());
1167 if (myWorkshop->currentOperation() &&
1168 (!aAllowActivationList.contains(myWorkshop->currentOperation()->id())))
1170 XGUI_Workshop* aWorkshop = getWorkshop();
1171 XGUI_DataTree* aTreeView = aWorkshop->objectBrowser()->treeView();
1172 QLabel* aLabel = aWorkshop->objectBrowser()->activeDocLabel();
1173 QPalette aPalet = aLabel->palette();
1175 SessionPtr aMgr = ModelAPI_Session::get();
1176 DocumentPtr aActiveDoc = aMgr->activeDocument();
1177 if (aActivePartIndex.isValid())
1178 aTreeView->setExpanded(aActivePartIndex, false);
1179 XGUI_DataModel* aDataModel = aWorkshop->objectBrowser()->dataModel();
1180 aActivePartIndex = aDataModel->documentRootIndex(aActiveDoc);
1181 if (aActivePartIndex.isValid())
1182 aTreeView->setExpanded(aActivePartIndex, true);
1184 aLabel->setPalette(aPalet);
1185 aWorkshop->updateCommandStatus();
1187 // Update displayed objects in order to update active color
1188 XGUI_Displayer* aDisplayer = aWorkshop->displayer();
1189 QObjectPtrList aObjects = aDisplayer->displayedObjects();
1191 foreach(ObjectPtr aObj, aObjects) {
1192 //TODO: replace by redisplay event.
1193 aHidden = !aObj->data() || !aObj->data()->isValid() ||
1194 aObj->isDisabled() || (!aObj->isDisplayed());
1196 aDisplayer->redisplay(aObj, false);
1198 aDisplayer->updateViewer();
1202 void PartSet_Module::onTreeViewDoubleClick(const QModelIndex& theIndex)
1204 if (myWorkshop->currentOperation()) // Do not change activation of parts if an operation active
1206 SessionPtr aMgr = ModelAPI_Session::get();
1207 if (!theIndex.isValid()) {
1208 aMgr->setActiveDocument(aMgr->moduleDocument());
1211 if (theIndex.column() != 0) // Use only first column
1214 XGUI_Workshop* aWorkshop = getWorkshop();
1215 XGUI_DataModel* aDataModel = aWorkshop->objectBrowser()->dataModel();
1216 // De not use non editable Indexes
1217 if ((aDataModel->flags(theIndex) & Qt::ItemIsSelectable) == 0)
1219 ObjectPtr aObj = aDataModel->object(theIndex);
1221 ResultPartPtr aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aObj);
1222 if (!aPart.get()) { // Probably this is Feature
1223 FeaturePtr aPartFeature = std::dynamic_pointer_cast<ModelAPI_Feature>(aObj);
1224 if (aPartFeature.get() && (aPartFeature->getKind() == PartSetPlugin_Part::ID())) {
1225 aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aPartFeature->firstResult());
1228 if (aPart.get()) { // if this is a part
1229 if (aPart->partDoc() == aMgr->activeDocument()) {
1230 myMenuMgr->activatePartSet();
1238 void PartSet_Module::onViewCreated(ModuleBase_IViewWindow*)
1240 // z layer is created for all started operations in order to visualize operation AIS presentation
1242 Handle(AIS_InteractiveContext) aContext = myWorkshop->viewer()->AISContext();
1243 if (aContext.IsNull())
1246 Handle(V3d_Viewer) aViewer = aContext->CurrentViewer();
1247 if (myVisualLayerId == 0) {
1248 if (myVisualLayerId == 0)
1249 aViewer->AddZLayer(myVisualLayerId);
1251 TColStd_SequenceOfInteger aZList;
1252 aViewer->GetAllZLayers(aZList);
1253 bool aFound = false;
1254 for (int i = 1; i <= aZList.Length(); i++) {
1255 if (aZList(i) == myVisualLayerId) {
1261 aViewer->AddZLayer(myVisualLayerId);
1263 // if there is an active operation with validated widget,
1264 // the filters of this widget should be activated in the created view
1265 ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
1267 ModuleBase_ModelWidget* anActiveWidget = activeWidget();
1268 if (anActiveWidget) {
1269 ModuleBase_WidgetSelector* aWSelector = dynamic_cast<ModuleBase_WidgetSelector*>(anActiveWidget);
1271 aWSelector->activateSelectionAndFilters(true);
1276 //******************************************************
1277 void PartSet_Module::widgetStateChanged(int thePreviousState)
1279 mySketchMgr->widgetStateChanged(thePreviousState);
1282 bool PartSet_Module::processEnter(const std::string& thePreviousAttributeID)
1284 return mySketchReentrantMgr->processEnter(thePreviousAttributeID);
1287 //******************************************************
1288 void PartSet_Module::beforeOperationStarted(ModuleBase_Operation* theOperation)
1292 //******************************************************
1293 void PartSet_Module::beforeOperationStopped(ModuleBase_Operation* theOperation)
1295 if (PartSet_SketcherMgr::isSketchOperation(theOperation)) {
1296 mySketchMgr->stopSketch(theOperation);
1300 //******************************************************
1301 GeomShapePtr PartSet_Module::findShape(const AttributePtr& theAttribute)
1303 GeomShapePtr aGeomShape;
1305 ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
1306 if (anOperation && PartSet_SketcherMgr::isNestedSketchOperation(anOperation)) {
1307 aGeomShape = PartSet_Tools::findShapeBy2DPoint(theAttribute, myWorkshop);
1312 //******************************************************
1313 AttributePtr PartSet_Module::findAttribute(const ObjectPtr& theObject,
1314 const GeomShapePtr& theGeomShape)
1316 AttributePtr anAttribute;
1317 GeomShapePtr aGeomShape = theGeomShape;
1318 if (!aGeomShape.get()) {
1319 // processing shape of result, e.g. sketch circle center is selected, this is a result
1320 // the geom shape is empty, the shape of result should be used
1321 ResultPtr aResult = std::dynamic_pointer_cast<ModelAPI_Result>(theObject);
1322 if (aResult.get()) {
1323 aGeomShape = aResult->shape();
1327 if (aGeomShape.get()) {
1328 TopoDS_Shape aTDSShape = aGeomShape->impl<TopoDS_Shape>();
1329 return PartSet_Tools::findAttributeBy2dPoint(theObject, aTDSShape,
1330 mySketchMgr->activeSketch());
1335 //******************************************************
1336 void PartSet_Module::onChoiceChanged(ModuleBase_ModelWidget* theWidget,
1339 PartSet_WidgetChoice* aChoiceWidget = dynamic_cast<PartSet_WidgetChoice*>(theWidget);
1343 QString aChoiceTitle = aChoiceWidget->getPropertyPanelTitle(theIndex);
1344 if (!aChoiceTitle.isEmpty()) {
1345 ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
1348 ModuleBase_IPropertyPanel* aPanel = aOperation->propertyPanel();
1350 aPanel->setWindowTitle(aChoiceTitle);
1354 //******************************************************
1355 XGUI_Workshop* PartSet_Module::getWorkshop() const
1357 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
1358 return aConnector->workshop();
1361 //******************************************************
1362 void PartSet_Module::setDefaultConstraintShown()
1364 myHasConstraintShown[PartSet_Tools::Geometrical] = true;
1365 myHasConstraintShown[PartSet_Tools::Dimensional] = true;
1366 myHasConstraintShown[PartSet_Tools::Expressions] = false;