1 // Copyright (C) 2014-2019 CEA/DEN, EDF R&D
3 // This library is free software; you can redistribute it and/or
4 // modify it under the terms of the GNU Lesser General Public
5 // License as published by the Free Software Foundation; either
6 // version 2.1 of the License, or (at your option) any later version.
8 // This library is distributed in the hope that it will be useful,
9 // but WITHOUT ANY WARRANTY; without even the implied warranty of
10 // MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
11 // Lesser General Public License for more details.
13 // You should have received a copy of the GNU Lesser General Public
14 // License along with this library; if not, write to the Free Software
15 // Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
17 // See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
20 #include "PartSet_Module.h"
21 #include "PartSet_WidgetSketchLabel.h"
22 #include "PartSet_Validators.h"
23 #include "PartSet_Tools.h"
24 #include "PartSet_PreviewPlanes.h"
25 #include "PartSet_WidgetBSplinePoints.h"
26 #include "PartSet_WidgetPoint2d.h"
27 #include "PartSet_WidgetPoint2DFlyout.h"
28 #include "PartSet_WidgetShapeSelector.h"
29 #include "PartSet_WidgetMultiSelector.h"
30 #include "PartSet_WidgetFeaturePointSelector.h"
31 #include "PartSet_WidgetEditor.h"
32 #include "PartSet_WidgetFileSelector.h"
33 #include "PartSet_WidgetSketchCreator.h"
34 #include "PartSet_SketcherMgr.h"
35 #include "PartSet_SketcherReentrantMgr.h"
36 #include "PartSet_ResultSketchPrs.h"
37 #include "PartSet_MenuMgr.h"
38 #include "PartSet_CustomPrs.h"
39 #include "PartSet_IconFactory.h"
40 #include "PartSet_OverconstraintListener.h"
41 #include "PartSet_TreeNodes.h"
42 #include "PartSet_FieldStepPrs.h"
43 #include "PartSet_BSplineWidget.h"
45 #include "PartSet_Filters.h"
46 #include "PartSet_FilterInfinite.h"
52 #include <PartSetPlugin_Remove.h>
53 #include <PartSetPlugin_Part.h>
54 #include <PartSetPlugin_Duplicate.h>
56 #include <SketchPlugin_ConstraintCoincidence.h>
58 #include <ModuleBase_Operation.h>
59 #include <ModuleBase_IViewer.h>
60 #include <ModuleBase_IViewWindow.h>
61 #include <ModuleBase_IPropertyPanel.h>
62 #include <ModuleBase_ISelectionActivate.h>
63 #include <ModuleBase_WidgetChoice.h>
64 #include <ModuleBase_WidgetEditor.h>
65 #include <ModuleBase_WidgetValidated.h>
66 #include <ModuleBase_Tools.h>
67 #include <ModuleBase_OperationFeature.h>
68 #include <ModuleBase_WidgetFactory.h>
69 #include <ModuleBase_OperationDescription.h>
70 #include <ModuleBase_ViewerPrs.h>
71 #include <ModuleBase_ResultPrs.h>
73 #include <ModelAPI_ResultField.h>
74 #include <ModelAPI_Object.h>
75 #include <ModelAPI_Events.h>
76 #include <ModelAPI_Validator.h>
77 #include <ModelAPI_Data.h>
78 #include <ModelAPI_Session.h>
79 #include <ModelAPI_ResultBody.h>
80 #include <ModelAPI_AttributeString.h>
81 #include <ModelAPI_AttributeSelectionList.h>
82 #include <ModelAPI_Tools.h>
83 #include <ModelAPI_ResultConstruction.h>
84 #include <ModelAPI_AttributeIntArray.h>
85 #include <ModelAPI_ResultGroup.h>
87 #include <GeomDataAPI_Point2D.h>
88 #include <GeomDataAPI_Point.h>
89 #include <GeomDataAPI_Dir.h>
91 #include <XGUI_ActiveControlMgr.h>
92 #include <XGUI_ActiveControlSelector.h>
93 #include <XGUI_ActionsMgr.h>
94 #include <XGUI_ContextMenuMgr.h>
95 #include <XGUI_DataModel.h>
96 #include <XGUI_Displayer.h>
97 #include <XGUI_ErrorMgr.h>
98 #include <XGUI_FacesPanelSelector.h>
99 #include <XGUI_ModuleConnector.h>
100 #include <XGUI_ObjectsBrowser.h>
101 #include <XGUI_OperationMgr.h>
102 #include <XGUI_PropertyPanel.h>
103 #include <XGUI_SelectionMgr.h>
104 #include <XGUI_Tools.h>
105 #include <XGUI_Workshop.h>
107 #include <SketchPlugin_ConstraintAngle.h>
108 #include <SketchPlugin_ConstraintLength.h>
109 #include <SketchPlugin_ConstraintDistance.h>
110 #include <SketchPlugin_ConstraintParallel.h>
111 #include <SketchPlugin_ConstraintPerpendicular.h>
112 #include <SketchPlugin_ConstraintRadius.h>
113 #include <SketchPlugin_Feature.h>
114 #include <SketchPlugin_Projection.h>
115 #include <SketchPlugin_Sketch.h>
117 #include <SketcherPrs_SymbolPrs.h>
118 #include <SketcherPrs_PositionMgr.h>
119 #include <SketcherPrs_Coincident.h>
120 #include <SketcherPrs_Tools.h>
122 #include <Events_Loop.h>
123 #include <Config_PropManager.h>
124 #include <Config_Keywords.h>
126 #include <AIS_Dimension.hxx>
127 #include <AIS_InteractiveObject.hxx>
128 #include <StdSelect_TypeOfFace.hxx>
129 #include <TopoDS_Vertex.hxx>
130 #include <TopoDS.hxx>
131 #include <TopoDS_Shape.hxx>
132 #include <BRep_Tool.hxx>
135 #include <QMouseEvent>
138 #include <QApplication>
139 #include <QMessageBox>
140 #include <QMainWindow>
144 #include <GeomAlgoAPI_FaceBuilder.h>
145 #include <GeomDataAPI_Dir.h>
147 #include <SelectMgr_ListIteratorOfListOfFilter.hxx>
149 /*!Create and return new instance of XGUI_Module*/
150 extern "C" PARTSET_EXPORT ModuleBase_IModule* createModule(ModuleBase_IWorkshop* theWshop)
152 return new PartSet_Module(theWshop);
155 //******************************************************
156 PartSet_Module::PartSet_Module(ModuleBase_IWorkshop* theWshop)
157 : ModuleBase_IModule(theWshop),
160 myIsOperationIsLaunched(false)
162 new PartSet_IconFactory(this);
164 mySketchMgr = new PartSet_SketcherMgr(this);
165 mySketchReentrantMgr = new PartSet_SketcherReentrantMgr(theWshop);
167 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(theWshop);
168 XGUI_Workshop* aWorkshop = aConnector->workshop();
170 ModuleBase_IViewer* aViewer = theWshop->viewer();
171 connect(aViewer, SIGNAL(keyRelease(ModuleBase_IViewWindow*, QKeyEvent*)),
172 this, SLOT(onKeyRelease(ModuleBase_IViewWindow*, QKeyEvent*)));
173 connect(aViewer, SIGNAL(viewTransformed(int)),
174 SLOT(onViewTransformed(int)));
175 connect(aViewer, SIGNAL(viewCreated(ModuleBase_IViewWindow*)),
176 SLOT(onViewCreated(ModuleBase_IViewWindow*)));
177 myMenuMgr = new PartSet_MenuMgr(this);
178 myCustomPrs = new PartSet_CustomPrs(theWshop);
180 myOverconstraintListener = new PartSet_OverconstraintListener(theWshop);
182 Events_Loop* aLoop = Events_Loop::loop();
183 aLoop->registerListener(this, Events_Loop::eventByName(EVENT_DOCUMENT_CHANGED));
184 aLoop->registerListener(this, Events_Loop::eventByName(EVENT_OBJECT_TO_REDISPLAY));
186 registerSelectionFilter(SF_GlobalFilter, new PartSet_GlobalFilter(myWorkshop));
187 registerSelectionFilter(SF_FilterInfinite, new PartSet_FilterInfinite(myWorkshop));
188 Handle(PartSet_ResultGroupNameFilter) aCRFilter = new PartSet_ResultGroupNameFilter(myWorkshop);
189 std::set<std::string> aCRGroupNames;
190 aCRGroupNames.insert(ModelAPI_ResultConstruction::group());
191 aCRFilter->setGroupNames(aCRGroupNames);
192 registerSelectionFilter(SF_ResultGroupNameFilter, aCRFilter);
194 setDefaultConstraintShown();
196 //Config_PropManager::registerProp("Visualization", "object_default_color", "Object color",
197 // Config_Prop::Color, "225,225,225");
199 Config_PropManager::registerProp("Visualization", "result_body_color", "Result color",
200 Config_Prop::Color, ModelAPI_ResultBody::DEFAULT_COLOR());
202 Config_PropManager::registerProp("Visualization", "result_group_color", "Group color",
203 Config_Prop::Color, ModelAPI_ResultGroup::DEFAULT_COLOR());
205 Config_PropManager::registerProp("Visualization", "result_construction_color",
206 "Construction color",
208 ModelAPI_ResultConstruction::DEFAULT_COLOR());
210 Config_PropManager::registerProp("Visualization", "result_part_color", "Part color",
211 Config_Prop::Color, ModelAPI_ResultPart::DEFAULT_COLOR());
213 Config_PropManager::registerProp("Visualization", "result_field_color", "Field color",
214 Config_Prop::Color, ModelAPI_ResultField::DEFAULT_COLOR());
216 Config_PropManager::registerProp("Visualization", "operation_parameter_color",
217 "Reference shape wireframe color in operation", Config_Prop::Color,
218 PartSet_CustomPrs::OPERATION_PARAMETER_COLOR());
219 Config_PropManager::registerProp("Visualization", "operation_result_color",
220 "Result shape wireframe color in operation", Config_Prop::Color,
221 PartSet_CustomPrs::OPERATION_RESULT_COLOR());
222 Config_PropManager::registerProp("Visualization", "operation_highlight_color",
223 "Multi selector item color in operation", Config_Prop::Color,
224 PartSet_CustomPrs::OPERATION_HIGHLIGHT_COLOR());
225 Config_PropManager::registerProp("Visualization", "operation_remove_feature_color",
226 "Color of removed feature in operation", Config_Prop::Color,
227 PartSet_CustomPrs::OPERATION_REMOVE_FEATURE_COLOR());
228 Config_PropManager::registerProp("Visualization", "sketch_preview_plane",
229 "Color of sketch plane", Config_Prop::Color,
230 PartSet_CustomPrs::OPERATION_SKETCH_PLANE());
232 Config_PropManager::registerProp("Visualization", "hidden_face_transparency",
233 "Hidden faces transparency",
234 Config_Prop::DblSpin,
236 std::ostringstream aStream;
237 aStream << SketcherPrs_Tools::getDefaultArrowSize();
238 Config_PropManager::registerProp("Visualization", "dimension_arrow_size",
239 "Dimension arrow size", Config_Prop::IntSpin, aStream.str());
241 Config_PropManager::registerProp("Visualization", "dimension_font", "Dimension font",
242 Config_Prop::String, "Times-bold");
246 aStream << SketcherPrs_Tools::getDefaultTextHeight();
247 Config_PropManager::registerProp("Visualization", "dimension_value_size",
248 "Dimension value size", Config_Prop::IntSpin, aStream.str());
250 Config_PropManager::registerProp("Visualization", "sketch_dimension_color",
252 Config_Prop::Color, SKETCH_DIMENSION_COLOR);
254 Config_PropManager::registerProp("Shortcuts", "add_parameter_shortcut",
255 "Add parameter in parameters manager dialog",
256 Config_Prop::Shortcut, "Ctrl+A");
258 Config_PropManager::registerProp("Windows", "use_hide_faces_panel",
259 "Use HideFaces panel in operations", Config_Prop::Boolean, "false");
262 //******************************************************
263 PartSet_Module::~PartSet_Module()
266 delete myOverconstraintListener;
270 //******************************************************
271 void PartSet_Module::createFeatures()
273 ModuleBase_IModule::createFeatures();
274 myRoot = new PartSet_RootNode();
275 myRoot->setWorkshop(workshop());
279 //******************************************************
280 void PartSet_Module::storeSelection()
282 // cash is used only to restore selection, so it should be filled in storeSelection and
283 // after applying immediatelly cleared in restoreSelection
284 myCurrentSelection.clear();
285 sketchMgr()->storeSelection(PartSet_SketcherMgr::ST_SelectType, myCurrentSelection);
288 //******************************************************
289 void PartSet_Module::restoreSelection()
291 // cash is used only to restore selection, so it should be filled in storeSelection and
292 // after applying immediatelly cleared in restoreSelection
293 sketchMgr()->restoreSelection(myCurrentSelection);
294 myCurrentSelection.clear();
297 //******************************************************
298 void PartSet_Module::registerValidators()
300 //Registering of validators
301 SessionPtr aMgr = ModelAPI_Session::get();
302 ModelAPI_ValidatorsFactory* aFactory = aMgr->validators();
303 aFactory->registerValidator("PartSet_DistanceSelection", new PartSet_DistanceSelection);
304 aFactory->registerValidator("PartSet_LengthSelection", new PartSet_LengthSelection);
305 aFactory->registerValidator("PartSet_PerpendicularSelection", new PartSet_PerpendicularSelection);
306 aFactory->registerValidator("PartSet_ParallelSelection", new PartSet_ParallelSelection);
307 aFactory->registerValidator("PartSet_RadiusSelection", new PartSet_RadiusSelection);
308 aFactory->registerValidator("PartSet_RigidSelection", new PartSet_RigidSelection);
309 aFactory->registerValidator("PartSet_CoincidentSelection", new PartSet_CoincidentSelection);
310 aFactory->registerValidator("PartSet_HVDirSelection", new PartSet_HVDirSelection);
311 aFactory->registerValidator("PartSet_TangentSelection", new PartSet_TangentSelection);
312 aFactory->registerValidator("PartSet_FilletSelection", new PartSet_FilletSelection);
313 aFactory->registerValidator("PartSet_AngleSelection", new PartSet_AngleSelection);
314 aFactory->registerValidator("PartSet_EqualSelection", new PartSet_EqualSelection);
315 aFactory->registerValidator("PartSet_CollinearSelection", new PartSet_CollinearSelection);
316 aFactory->registerValidator("PartSet_MiddlePointSelection", new PartSet_MiddlePointSelection);
317 aFactory->registerValidator("PartSet_DifferentObjects", new PartSet_DifferentObjectsValidator);
318 aFactory->registerValidator("PartSet_DifferentPoints", new PartSet_DifferentPointsValidator);
319 aFactory->registerValidator("PartSet_CoincidentAttr", new PartSet_CoincidentAttr);
320 aFactory->registerValidator("PartSet_MultyTranslationSelection",
321 new PartSet_MultyTranslationSelection);
322 aFactory->registerValidator("PartSet_SplitSelection", new PartSet_SplitSelection);
323 aFactory->registerValidator("PartSet_ProjectionSelection", new PartSet_ProjectionSelection);
324 aFactory->registerValidator("PartSet_IntersectionSelection", new PartSet_IntersectionSelection);
327 //******************************************************
328 void PartSet_Module::connectToPropertyPanel(ModuleBase_ModelWidget* theWidget,
329 const bool isToConnect)
331 mySketchMgr->connectToPropertyPanel(theWidget, isToConnect);
334 //******************************************************
335 void PartSet_Module::operationCommitted(ModuleBase_Operation* theOperation)
337 if (sketchMgr()->isNestedSketchOperation(theOperation)) {
338 mySketchMgr->commitNestedSketch(theOperation);
340 /// deactivate of overconstraint listener should be performed after Sketch commit (#2176)
341 if (PartSet_SketcherMgr::isSketchOperation(theOperation))
342 overconstraintListener()->setActive(false);
344 /// Restart sketcher operations automatically
345 if (!mySketchReentrantMgr->operationCommitted(theOperation)) {
347 ModuleBase_OperationFeature* aFOperation =
348 dynamic_cast<ModuleBase_OperationFeature*>(theOperation);
349 if (aFOperation && !aFOperation->isEditOperation()) {
350 // the selection is cleared after commit the create operation
351 // in order to do not use the same selected objects in the restarted operation
352 // for common behaviour, the selection is cleared even if the operation is not restarted
353 getWorkshop()->selector()->clearSelection();
358 //******************************************************
359 void PartSet_Module::operationAborted(ModuleBase_Operation* theOperation)
361 /// Restart sketcher operations automatically
362 mySketchReentrantMgr->operationAborted(theOperation);
363 /// deactivate of overconstraint listener should be performed after Sketch abort (#2176)
364 if (PartSet_SketcherMgr::isSketchOperation(theOperation))
365 overconstraintListener()->setActive(false);
368 //******************************************************
369 void PartSet_Module::operationStarted(ModuleBase_Operation* theOperation)
371 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>
374 XGUI_Workshop* aWorkshop = XGUI_Tools::workshop(workshop());
375 XGUI_PropertyPanel* aPropertyPanel = aWorkshop->propertyPanel();
377 ModuleBase_ModelWidget* aFilledWidget = 0;
378 bool aPostonedWidgetActivation = false;
380 FeaturePtr aFeature = aFOperation->feature();
381 /// Restart sketcher operations automatically
382 /// it is important to call method of sketch reentrant manager before filling of PP
383 /// because it fills some created feature attributes, these new values should be used
384 /// to fill the property panel
385 mySketchReentrantMgr->operationStarted(theOperation);
387 aWorkshop->fillPropertyPanel(aFOperation);
388 // filling the operation values by the current selection
389 // if the operation can be committed after the controls filling, the method perform should
390 // be stopped. Otherwise unnecessary presentations can be shown(e.g. operation prs in sketch)
391 bool isOperationCommitted = false;
392 if (!aFOperation->isEditOperation()) {
393 std::string aGreedAttributeId = ModuleBase_Tools::findGreedAttribute(workshop(), aFeature);
394 // if there is a greed attribute, automatic commit by preselection
395 // for this feature is prohibited
396 aFilledWidget = aFOperation->activateByPreselection(aGreedAttributeId);
397 if (currentOperation() != aFOperation)
398 isOperationCommitted = true;
400 if (aGreedAttributeId.empty()) {
401 // a signal should be emitted before the next widget activation
402 // because, the activation of the next widget will give a focus to the widget.
403 // As a result the value of the widget is initialized.
404 // And commit may happens until the value is entered.
406 if (mySketchReentrantMgr->canBeCommittedByPreselection())
407 isOperationCommitted = mySketchMgr->operationActivatedByPreselection();
408 // activate the next obligatory widget
409 if (!isOperationCommitted)
410 aPropertyPanel->activateNextWidget(aFilledWidget);
413 else { // there is a greed widget
414 const QList<ModuleBase_ModelWidget*>& aWidgets = aPropertyPanel->modelWidgets();
415 std::string aFirstAttributeId = aWidgets.front()->attributeID();
416 // activate next widget after greeded if it is the first widget in the panel
417 // else the first panel widget is already activated by operation start
418 if (aFirstAttributeId == aGreedAttributeId)
419 aPostonedWidgetActivation = true;
422 } if (!isOperationCommitted) {
423 aWorkshop->connectToPropertyPanel(true);
424 updateSketcherOnStart(aFOperation);
425 updatePresentationsOnStart(aFOperation);
427 // the objects of the current operation should be deactivated
428 QObjectPtrList anObjects;
429 anObjects.append(aFeature);
430 std::list<ResultPtr> aResults;
431 ModelAPI_Tools::allResults(aFeature, aResults);
432 std::list<ResultPtr>::const_iterator aIt;
433 for (aIt = aResults.begin(); aIt != aResults.end(); ++aIt) {
434 anObjects.append(*aIt);
436 QObjectPtrList::const_iterator anIt = anObjects.begin(), aLast = anObjects.end();
437 for (; anIt != aLast; anIt++)
438 aWorkshop->deactivateActiveObject(*anIt, false);
439 if (anObjects.size() > 0) {
440 XGUI_Displayer* aDisplayer = aWorkshop->displayer();
441 aDisplayer->updateViewer();
443 /// state of command actions should be updated after displayed objects modification because
444 /// deactivation(for example) of objects may influence on selection in the viewer
445 /// State of command actions may depend on selection in the viewer(e.g. Sketch)
446 workshop()->updateCommandStatus();
448 if (aPostonedWidgetActivation) {
449 // if the widget is an empty in the chain of activated widgets, the current operation
450 // is restarted. It should be performed after functionality of the operation starting
451 aPropertyPanel->activateNextWidget(aFilledWidget);
456 //******************************************************
457 void PartSet_Module::updateSketcherOnStart(ModuleBase_Operation* theOperation)
459 if (PartSet_SketcherMgr::isSketchOperation(theOperation)) {
460 mySketchMgr->startSketch(theOperation);
462 // It is switched off because of
463 // Task #3067: 5.2.2 Drawing in the sketcher: change the mouse cursor arrow
464 else if (sketchMgr()->isNestedSketchOperation(theOperation)) {
465 mySketchMgr->startNestedSketch(theOperation);
469 //******************************************************
470 void PartSet_Module::updatePresentationsOnStart(ModuleBase_Operation* theOperation)
472 ModuleBase_OperationFeature* aFOperation =
473 dynamic_cast<ModuleBase_OperationFeature*>(theOperation);
475 myCustomPrs->activate(aFOperation->feature(), ModuleBase_IModule::CustomizeArguments, false);
476 myCustomPrs->activate(aFOperation->feature(), ModuleBase_IModule::CustomizeResults, false);
480 //******************************************************
481 void PartSet_Module::operationResumed(ModuleBase_Operation* theOperation)
483 ModuleBase_IModule::operationResumed(theOperation);
485 ModuleBase_OperationFeature* aFOperation =
486 dynamic_cast<ModuleBase_OperationFeature*>(theOperation);
488 myCustomPrs->activate(aFOperation->feature(), ModuleBase_IModule::CustomizeArguments, false);
489 myCustomPrs->activate(aFOperation->feature(), ModuleBase_IModule::CustomizeResults, false);
493 //******************************************************
494 void PartSet_Module::operationStopped(ModuleBase_Operation* theOperation)
496 bool isModifiedArgs = myCustomPrs->deactivate(ModuleBase_IModule::CustomizeArguments, false);
497 bool isModifiedResults = myCustomPrs->deactivate(ModuleBase_IModule::CustomizeResults, false);
498 bool isModified = isModifiedArgs || isModifiedResults;
500 if (sketchMgr()->isNestedSketchOperation(theOperation)) {
501 mySketchMgr->stopNestedSketch(theOperation);
503 else if (PartSet_SketcherMgr::isSketchOperation(theOperation))
504 setDefaultConstraintShown();
506 //VSV: Viewer is updated on feature update and redisplay
508 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(myWorkshop);
509 XGUI_Displayer* aDisplayer = aConnector->workshop()->displayer();
510 aDisplayer->updateViewer();
513 QMap<PartSet_Tools::ConstraintVisibleState, bool>::const_iterator
514 anIt = myHasConstraintShown.begin(), aLast = myHasConstraintShown.end();
515 for (; anIt != aLast; anIt++) {
516 mySketchMgr->updateBySketchParameters(anIt.key(), anIt.value());
520 //******************************************************
521 ModuleBase_Operation* PartSet_Module::currentOperation() const
523 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
524 XGUI_OperationMgr* anOpMgr = aConnector->workshop()->operationMgr();
525 return anOpMgr->currentOperation();
528 //******************************************************
529 bool PartSet_Module::canUndo() const
531 bool aCanUndo = false;
532 SessionPtr aMgr = ModelAPI_Session::get();
533 if (aMgr->hasModuleDocument() && aMgr->canUndo()) {
534 aCanUndo = !aMgr->isOperation();
535 if (!aCanUndo) // check the enable state additionally by sketch manager
536 aCanUndo = aMgr->canUndo();
541 //******************************************************
542 bool PartSet_Module::canRedo() const
544 bool aCanRedo = false;
545 SessionPtr aMgr = ModelAPI_Session::get();
546 if (aMgr->hasModuleDocument() && aMgr->canRedo()) {
547 aCanRedo = !aMgr->isOperation();
548 if (!aCanRedo) // check the enable state additionally by sketch manager
549 aCanRedo = aMgr->canRedo();
554 //******************************************************
555 bool PartSet_Module::canApplyAction(const ObjectPtr& theObject, const QString& theActionId) const
558 if (theActionId == "MOVE_CMD" || theActionId == "MOVE_SPLIT_CMD") {
559 FeaturePtr aFeature = ModelAPI_Feature::feature(theObject);
561 ResultPtr aResult = ModuleBase_Tools::firstResult(aFeature);
562 // part features can not be moved in the history.
563 if (aResult.get() && aResult->groupName() == ModelAPI_ResultPart::group())
570 //******************************************************
571 bool PartSet_Module::canEraseObject(const ObjectPtr& theObject) const
573 // the sketch manager put the restriction to the objects erase
574 return mySketchMgr->canEraseObject(theObject);
577 //******************************************************
578 bool PartSet_Module::canDisplayObject(const ObjectPtr& theObject) const
580 // the sketch manager put the restriction to the objects display
581 return mySketchMgr->canDisplayObject(theObject);
584 //******************************************************
585 bool PartSet_Module::canUsePreselection(const QString& thePreviousOperationKind,
586 const QString& theStartedOperationKind)
588 if (ModuleBase_IModule::canUsePreselection(thePreviousOperationKind, theStartedOperationKind))
591 return mySketchMgr->isNestedSketchFeature(theStartedOperationKind);
594 /*void PartSet_Module::processHiddenObject(const std::list<ObjectPtr>& theObjects)
596 mySketchMgr->processHiddenObject(theObjects);
599 //******************************************************
600 bool PartSet_Module::canActivateSelection(const ObjectPtr& theObject) const
602 bool aCanActivate = ModuleBase_IModule::canActivateSelection(theObject);
604 ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
605 bool isSketchOp = PartSet_SketcherMgr::isSketchOperation(anOperation),
606 isNestedOp = sketchMgr()->isNestedSketchOperation(anOperation);
607 if (isSketchOp || isNestedOp) {
608 // in active sketch operation it is possible to activate operation object in selection
609 // in the edit operation, e.g. points of the line can be moved when the line is edited
610 ModuleBase_OperationFeature* aFOperation =
611 dynamic_cast<ModuleBase_OperationFeature*>(anOperation);
612 aCanActivate = aCanActivate || (aFOperation && aFOperation->isEditOperation());
617 //******************************************************
618 bool PartSet_Module::addViewerMenu(const QMap<QString, QAction*>& theStdActions,
620 QMap<int, QAction*>& theMenuActions) const
622 return myMenuMgr->addViewerMenu(theStdActions, theParent, theMenuActions);
625 //******************************************************
626 void PartSet_Module::updateViewerMenu(const QMap<QString, QAction*>& theStdActions)
628 myMenuMgr->updateViewerMenu(theStdActions);
631 //******************************************************
632 bool PartSet_Module::isActionEnableStateFixed(const int theActionId) const
634 bool isEnabledFixed = false;
635 if (theActionId == XGUI_ActionsMgr::AcceptAll &&
636 mySketchReentrantMgr->isInternalEditActive())
637 isEnabledFixed = true;
638 return isEnabledFixed;
641 //******************************************************
642 QString PartSet_Module::getFeatureError(const FeaturePtr& theFeature)
644 QString anError = ModuleBase_IModule::getFeatureError(theFeature);
645 if (anError.isEmpty())
646 anError = sketchMgr()->getFeatureError(theFeature);
651 //******************************************************
652 void PartSet_Module::grantedOperationIds(ModuleBase_Operation* theOperation,
653 QStringList& theIds) const
655 myMenuMgr->grantedOperationIds(theOperation, theIds);
657 if (PartSet_SketcherMgr::isSketchOperation(theOperation)) {
658 XGUI_Workshop* aWorkshop = getWorkshop();
659 theIds.append(aWorkshop->contextMenuMgr()->action("DELETE_CMD")->text());
663 //******************************************************
664 void PartSet_Module::activeSelectionModes(QIntList& theModes)
666 if (mySketchMgr->activeSketch().get())
667 PartSet_SketcherMgr::sketchSelectionModes(mySketchMgr->activeSketch(), theModes);
669 theModes = XGUI_Tools::workshop(myWorkshop)->viewerSelectionModes();
672 //******************************************************
673 void PartSet_Module::moduleSelectionModes(int theModesType, QIntList& theModes)
675 customSubShapesSelectionModes(theModes);
676 //theModes.append(XGUI_Tools::workshop(myWorkshop)->viewerSelectionModes());
677 //myWorkshop->module()->activeSelectionModes(theModes);
680 //******************************************************
681 void PartSet_Module::moduleSelectionFilters(const QIntList& theFilterTypes,
682 SelectMgr_ListOfFilter& theSelectionFilters)
684 bool isSketchActive = mySketchMgr->activeSketch().get();
686 std::map<ModuleBase_SelectionFilterType, Handle(SelectMgr_Filter)>::const_iterator aFiltersIt =
687 mySelectionFilters.begin();
688 for (; aFiltersIt != mySelectionFilters.end(); aFiltersIt++) {
689 int aFilterType = aFiltersIt->first;
690 // do not add not participating filters in given parameters
691 if (!theFilterTypes.contains(aFilterType))
694 // using sketch filters only if sketch operation is active
695 if (!isSketchActive &&
696 mySketchMgr->sketchSelectionFilter((ModuleBase_SelectionFilterType)aFilterType))
699 // using filtering of construction results only from faces panel
700 if (aFilterType == SF_ResultGroupNameFilter)
703 theSelectionFilters.Append(aFiltersIt->second);
707 //******************************************************
708 void PartSet_Module::customSubShapesSelectionModes(QIntList& theModes)
710 if (theModes.contains(TopAbs_FACE))
711 theModes.append(SketcherPrs_Tools::Sel_Sketch_Face);
712 if (theModes.contains(TopAbs_WIRE))
713 theModes.append(SketcherPrs_Tools::Sel_Sketch_Wire);
715 if (mySketchMgr->activeSketch().get())
716 PartSet_SketcherMgr::sketchSelectionModes(mySketchMgr->activeSketch(), theModes);
719 //******************************************************
720 void PartSet_Module::getGeomSelection(const std::shared_ptr<ModuleBase_ViewerPrs>& theSelected,
721 ObjectPtr& theObject, AttributePtr& theAttribute)
723 ObjectPtr anObject = theSelected->object();
724 GeomShapePtr aShape = theSelected->shape();
726 theAttribute = findAttribute(anObject, aShape);
727 // TODO: try to create result if object is an external object
728 theObject = anObject;
731 //******************************************************
732 bool PartSet_Module::isMouseOverWindow()
734 return mySketchMgr->isMouseOverWindow();
737 //******************************************************
738 bool PartSet_Module::isSketchNeutralPointActivated() const
740 bool isNeutralPoint = true;
741 if (sketchReentranceMgr()->isInternalEditActive())
742 isNeutralPoint = false;
743 if (myIsOperationIsLaunched)
744 isNeutralPoint = false;
746 return isNeutralPoint;
749 //******************************************************
750 void PartSet_Module::closeDocument()
752 myActivePartIndex = QModelIndex();
753 SketcherPrs_PositionMgr::get()->clearAll();
756 //******************************************************
757 void PartSet_Module::clearViewer()
759 myCustomPrs->clearPrs();
761 XGUI_Workshop* aWorkshop = getWorkshop();
762 XGUI_Displayer* aDisplayer = aWorkshop->displayer();
763 aDisplayer->deactivateSelectionFilters(false);
766 //******************************************************
767 void PartSet_Module::propertyPanelDefined(ModuleBase_Operation* theOperation)
769 ModuleBase_OperationFeature* aFOperation =
770 dynamic_cast<ModuleBase_OperationFeature*>(theOperation);
774 ModuleBase_IPropertyPanel* aPanel = aFOperation->propertyPanel();
775 // we have to manually activate the sketch label in edit mode
776 if (PartSet_SketcherMgr::isSketchOperation(aFOperation) && (aFOperation->isEditOperation()))
777 aPanel->activateWidget(aPanel->modelWidgets().first());
780 //******************************************************
781 bool PartSet_Module::createWidgets(const FeaturePtr& theFeature, const QString& theXmlRepr,
782 QList<ModuleBase_ModelWidget*>& theWidgets) const
784 bool aProcessed = false;
786 XGUI_Workshop* aWorkshop = getWorkshop();
787 XGUI_PropertyPanel* aPropertyPanel = aWorkshop->propertyPanel();
788 if (mySketchMgr->activeSketch().get() && aPropertyPanel) {
789 ModuleBase_ISelection* aSelection = workshop()->selection();
790 // click on a point in sketch leads here with the point is highlighted, not yet selected
791 QList<ModuleBase_ViewerPrsPtr> aPreselection = aSelection->getHighlighted();
792 if (aPreselection.size() == 1) {
793 ModuleBase_ViewerPrsPtr aSelectedPrs = aPreselection[0];
794 ObjectPtr anObject = aSelectedPrs->object();
796 FeaturePtr aFeature = ModelAPI_Feature::feature(anObject);
797 GeomShapePtr aShape = aSelectedPrs->shape();
798 // click on the digit of dimension constrain comes here
799 // with an empty shape, so we need the check
800 if (aFeature == theFeature && aShape.get() && !aShape->isNull()) {
801 // if feature has only one result and shape of result is equal to selected shape
802 // this attribute is not processed. It is a case of Sketch Point.
803 if (aFeature->results().size() == 1) {
804 ResultPtr aResult = aFeature->results().front();
805 if (aResult.get() && aResult->shape()->isEqual(aShape))
808 const TopoDS_Shape& aTDShape = aShape->impl<TopoDS_Shape>();
809 std::pair<AttributePtr, int> anAttribute =
810 PartSet_Tools::findAttributeBy2dPoint(anObject, aTDShape, mySketchMgr->activeSketch());
811 if (anAttribute.first.get()) {
812 ModuleBase_WidgetFactory aFactory(theXmlRepr.toStdString(), workshop());
814 const std::string anAttributeId = anAttribute.first->id();
815 aFactory.createWidget(aPropertyPanel->contentWidget(), anAttributeId);
817 theWidgets = aFactory.getModelWidgets();
818 // it is possible that the point does not present in XML definition,
819 // in this case, we assume that it is not processed by this module
820 // e.g. "Intersection point" feature
821 aProcessed = !theWidgets.isEmpty();
829 //******************************************************
830 void PartSet_Module::onSelectionChanged()
832 ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
836 bool isSketcherOp = false;
837 // An edit operation is enable only if the current opeation is the sketch operation
838 if (mySketchMgr->activeSketch()) {
839 if (PartSet_Tools::sketchPlane(mySketchMgr->activeSketch()))
840 isSketcherOp = PartSet_SketcherMgr::isSketchOperation(aOperation);
843 // Editing of constraints can be done on selection
844 ModuleBase_ISelection* aSelect = myWorkshop->selection();
845 QList<ModuleBase_ViewerPrsPtr> aSelected = aSelect->getSelected();
846 if (aSelected.size() == 1) {
847 ModuleBase_ViewerPrsPtr aPrs = aSelected.first();
848 ObjectPtr aObject = aPrs->object();
849 FeaturePtr aFeature = ModelAPI_Feature::feature(aObject);
851 std::string aId = aFeature->getKind();
852 if ((aId == SketchPlugin_ConstraintRadius::ID()) ||
853 (aId == SketchPlugin_ConstraintLength::ID()) ||
854 (aId == SketchPlugin_ConstraintDistance::ID()) ||
855 (aId == SketchPlugin_ConstraintAngle::ID())) {
856 editFeature(aFeature);
863 //******************************************************
864 void PartSet_Module::onKeyRelease(ModuleBase_IViewWindow* theWnd, QKeyEvent* theEvent)
866 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
867 XGUI_OperationMgr* anOpMgr = aConnector->workshop()->operationMgr();
868 anOpMgr->onKeyReleased(theWnd->viewPort(), theEvent);
871 //******************************************************
872 ModuleBase_ModelWidget* PartSet_Module::createWidgetByType(const std::string& theType,
874 Config_WidgetAPI* theWidgetApi)
876 ModuleBase_IWorkshop* aWorkshop = workshop();
877 XGUI_Workshop* aXUIWorkshop = getWorkshop();
878 ModuleBase_ModelWidget* aWgt = NULL;
879 if (theType == "sketch-start-label") {
880 PartSet_WidgetSketchLabel* aLabelWgt = new PartSet_WidgetSketchLabel(theParent, aWorkshop,
881 theWidgetApi, myHasConstraintShown);
882 connect(aLabelWgt, SIGNAL(planeSelected(const std::shared_ptr<GeomAPI_Pln>&)),
883 mySketchMgr, SLOT(onPlaneSelected(const std::shared_ptr<GeomAPI_Pln>&)));
884 connect(aLabelWgt, SIGNAL(showConstraintToggled(int, bool)),
885 mySketchMgr, SLOT(onShowConstraintsToggle(int, bool)));
886 connect(aLabelWgt, SIGNAL(showFreePoints(bool)), mySketchMgr, SLOT(onShowPoints(bool)));
887 connect(aLabelWgt, SIGNAL(autoConstraints(bool)),
888 sketchReentranceMgr(), SLOT(onAutoConstraints(bool)));
889 aLabelWgt->setShowPointsState(mySketchMgr->isShowFreePointsShown());
891 } else if (theType == "sketch-2dpoint_selector") {
892 PartSet_WidgetPoint2D* aPointWgt = new PartSet_WidgetPoint2D(theParent, aWorkshop,
894 aPointWgt->setSketch(mySketchMgr->activeSketch());
895 connect(aPointWgt, SIGNAL(vertexSelected()), sketchReentranceMgr(), SLOT(onVertexSelected()));
897 }else if (theType == "sketch-2dpoint_flyout_selector") {
898 PartSet_WidgetPoint2DFlyout* aPointWgt = new PartSet_WidgetPoint2DFlyout(theParent, aWorkshop,
900 aPointWgt->setSketch(mySketchMgr->activeSketch());
901 connect(aPointWgt, SIGNAL(vertexSelected()), sketchReentranceMgr(), SLOT(onVertexSelected()));
903 } else if (theType == "sketch_shape_selector") {
904 PartSet_WidgetShapeSelector* aShapeSelectorWgt =
905 new PartSet_WidgetShapeSelector(theParent, aWorkshop, theWidgetApi);
906 aShapeSelectorWgt->setSketcher(mySketchMgr->activeSketch());
907 aWgt = aShapeSelectorWgt;
908 } else if (theType == "sketch_multi_selector") {
909 PartSet_WidgetMultiSelector* aShapeSelectorWgt =
910 new PartSet_WidgetMultiSelector(theParent, aWorkshop, theWidgetApi);
911 aShapeSelectorWgt->setSketcher(mySketchMgr->activeSketch());
912 aWgt = aShapeSelectorWgt;
914 else if (theType == "sketch_feature_point_selector") {
915 PartSet_WidgetFeaturePointSelector* aPointSelectorWgt =
916 new PartSet_WidgetFeaturePointSelector(theParent, aWorkshop, theWidgetApi);
917 aPointSelectorWgt->setSketcher(mySketchMgr->activeSketch());
918 aWgt = aPointSelectorWgt;
920 else if (theType == "sketch-bspline_selector") {
921 PartSet_WidgetBSplinePoints* aBSplineWgt =
922 new PartSet_WidgetBSplinePoints(theParent, aWorkshop, theWidgetApi);
923 aBSplineWgt->setSketch(mySketchMgr->activeSketch());
926 else if (theType == WDG_DOUBLEVALUE_EDITOR) {
927 aWgt = new PartSet_WidgetEditor(theParent, aWorkshop, theWidgetApi);
928 } else if (theType == "export_file_selector") {
929 aWgt = new PartSet_WidgetFileSelector(theParent, aWorkshop, theWidgetApi);
930 } else if (theType == "sketch_launcher") {
931 aWgt = new PartSet_WidgetSketchCreator(theParent, this, theWidgetApi);
933 else if (theType == "module_choice") {
934 aWgt = new ModuleBase_WidgetChoice(theParent, theWidgetApi);
935 connect(aWgt, SIGNAL(itemSelected(ModuleBase_ModelWidget*, int)),
936 this, SLOT(onChoiceChanged(ModuleBase_ModelWidget*, int)));
937 } else if (theType == "bspline-panel") {
938 PartSet_BSplineWidget* aPanel = new PartSet_BSplineWidget(theParent, theWidgetApi);
939 //aPanel->setFeature(theFeature);
945 //******************************************************
946 ModuleBase_ModelWidget* PartSet_Module::activeWidget() const
948 ModuleBase_ModelWidget* anActiveWidget = 0;
950 ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
952 return anActiveWidget;
954 ModuleBase_IPropertyPanel* aPanel = aOperation->propertyPanel();
956 return anActiveWidget;
958 return aPanel->activeWidget(true);
961 //******************************************************
962 bool PartSet_Module::deleteObjects()
964 bool isProcessed = false;
966 XGUI_Workshop* aWorkshop = getWorkshop();
967 XGUI_OperationMgr* anOpMgr = aWorkshop->operationMgr();
969 //SessionPtr aMgr = ModelAPI_Session::get();
970 // 1. check whether the delete should be processed in the module
971 ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
972 bool isSketchOp = PartSet_SketcherMgr::isSketchOperation(anOperation),
973 isNestedOp = sketchMgr()->isNestedSketchOperation(anOperation);
974 if (isSketchOp || isNestedOp) {
976 // 2. find selected presentations
977 // selected objects should be collected before the current operation abort because
978 // the abort leads to selection lost on constraint objects. It can be corrected after #386 issue
979 ModuleBase_ISelection* aSel = workshop()->selection();
980 QObjectPtrList aSelectedObj = aSel->selectedPresentations();
981 // if there are no selected objects in the viewer, that means that the selection in another
982 // place cased this method. It is necessary to return the false value to understande in above
983 // method that delete is not processed
984 if (aSelectedObj.count() == 0)
987 // avoid delete of the objects, which are not belong to the current sketch
988 // in order to do not delete results of other sketches
989 QObjectPtrList aSketchObjects;
990 QObjectPtrList::const_iterator anIt = aSelectedObj.begin(), aLast = aSelectedObj.end();
991 for ( ; anIt != aLast; anIt++) {
992 ObjectPtr anObject = *anIt;
993 if (mySketchMgr->isObjectOfSketch(anObject)) {
994 // sketch feature should be used in this list because workshop deletes features only
995 // results are skipped
996 FeaturePtr aSketchFeature = ModelAPI_Feature::feature(anObject);
997 aSketchObjects.append(aSketchFeature);
1000 // if the selection contains only local selected presentations from other sketches,
1001 // the Delete operation should not be done at all
1002 if (aSketchObjects.size() == 0)
1005 // 3. start operation
1006 QString aDescription = aWorkshop->contextMenuMgr()->action("DELETE_CMD")->text();
1007 ModuleBase_Operation* anOpAction = new ModuleBase_Operation(aDescription, this);
1009 // the active nested sketch operation should be aborted unconditionally
1010 // the Delete action should be additionally granted for the Sketch operation
1011 // in order to do not abort/commit it
1013 if (!anOpMgr->canStartOperation(anOpAction->id(), isCommitted))
1014 return true; // the objects are processed but can not be deleted
1016 anOpMgr->startOperation(anOpAction);
1018 // WORKAROUND, should be done to avoid viewer highlight update after deletetion of objects
1019 // the problem is in AIS Dimensions recompute
1020 // if a line and the dim are removed, line is the first
1021 // it causes the AIS recompute, where the base line is null,
1022 // the result is empty AIS in the viewer
1023 XGUI_Tools::workshop(myWorkshop)->selector()->clearSelection();
1025 // 4. delete features
1026 // sketch feature should be skipped, only sub-features can be removed
1027 // when sketch operation is active
1028 aWorkshop->deleteFeatures(aSketchObjects);
1029 // 5. stop operation
1030 anOpMgr->commitOperation();
1035 //******************************************************
1036 void PartSet_Module::editFeature(FeaturePtr theFeature)
1038 storeConstraintsState(theFeature->getKind());
1039 ModuleBase_IModule::editFeature(theFeature);
1042 //******************************************************
1043 bool PartSet_Module::canCommitOperation() const
1048 //******************************************************
1049 void PartSet_Module::launchOperation(const QString& theCmdId, const bool& isStartAfterCommitOnly)
1051 myIsOperationIsLaunched = true;
1052 storeConstraintsState(theCmdId.toStdString());
1053 updateConstraintsState(theCmdId.toStdString());
1055 ModuleBase_IModule::launchOperation(theCmdId, isStartAfterCommitOnly);
1057 myIsOperationIsLaunched = false;
1060 //******************************************************
1061 void PartSet_Module::storeConstraintsState(const std::string& theFeatureKind)
1063 if (myWorkshop->currentOperation() &&
1064 myWorkshop->currentOperation()->id().toStdString() == SketchPlugin_Sketch::ID()) {
1065 const QMap<PartSet_Tools::ConstraintVisibleState, bool>& aShownStates =
1066 mySketchMgr->showConstraintStates();
1067 myHasConstraintShown = aShownStates;
1071 //******************************************************
1072 void PartSet_Module::updateConstraintsState(const std::string& theFeatureKind)
1074 if (PartSet_SketcherMgr::constraintsIdList().contains(theFeatureKind.c_str()) ||
1075 PartSet_SketcherMgr::replicationsIdList().contains(theFeatureKind.c_str())) {
1076 // Show constraints if a constraint was anOperation
1077 mySketchMgr->updateBySketchParameters(PartSet_Tools::Geometrical, true);
1078 mySketchMgr->updateBySketchParameters(PartSet_Tools::Dimensional, true);
1079 mySketchMgr->updateBySketchParameters(PartSet_Tools::Expressions,
1080 myHasConstraintShown[PartSet_Tools::Expressions]);
1084 //******************************************************
1085 void PartSet_Module::onObjectDisplayed(ObjectPtr theObject, AISObjectPtr theAIS)
1087 Handle(AIS_InteractiveObject) anAIS = theAIS->impl<Handle(AIS_InteractiveObject)>();
1088 if (!anAIS.IsNull()) {
1089 FeaturePtr aFeature = ModelAPI_Feature::feature(theObject);
1090 if (aFeature.get()) {
1091 bool aToUseZLayer = false;
1092 if (PartSet_Tools::findRefsToMeFeature(aFeature,SketchPlugin_Projection::ID()))
1093 aToUseZLayer = true;
1095 CompositeFeaturePtr aParent = ModelAPI_Tools::compositeOwner(aFeature);
1096 aToUseZLayer = (aParent.get() && (aParent->getKind() == SketchPlugin_Sketch::ID()));
1099 Handle(AIS_InteractiveContext) aCtx = anAIS->GetContext();
1100 if (aFeature->getKind() == SketchPlugin_ConstraintCoincidence::ID())
1101 aCtx->SetZLayer(anAIS, Graphic3d_ZLayerId_Top);
1103 aCtx->SetZLayer(anAIS, myVisualLayerId);
1109 //******************************************************
1110 void PartSet_Module::onBeforeObjectErase(ObjectPtr theObject, AISObjectPtr theAIS)
1113 // it should be recomputed in order to disappear in the viewer if the corresponded object
1115 //if (myCustomPrs->isActive())
1116 // myCustomPrs->redisplay(theObject, false);
1119 //******************************************************
1120 void PartSet_Module::onViewTransformed(int theTrsfType)
1122 // Set length of arrows constant in pixel size
1123 // if the operation is panning or rotate or panglobal then do nothing
1124 if ((theTrsfType == 1) || (theTrsfType == 3) || (theTrsfType == 4))
1126 ModuleBase_IViewer* aViewer = myWorkshop->viewer();
1127 Handle(AIS_InteractiveContext) aContext = aViewer->AISContext();
1128 if (aContext.IsNull())
1131 //Handle(V3d_View) aView = aViewer->activeView();
1133 XGUI_Workshop* aWorkshop = getWorkshop();
1134 XGUI_Displayer* aDisplayer = aWorkshop->displayer();
1135 Handle(V3d_Viewer) aV3dViewer = aContext->CurrentViewer();
1136 Handle(V3d_View) aView;
1138 for (aV3dViewer->InitDefinedViews();
1139 aV3dViewer->MoreDefinedViews();
1140 aV3dViewer->NextDefinedViews()) {
1141 Handle(V3d_View) aV = aV3dViewer->DefinedView();
1142 double aS = aV->Scale();
1151 bool isModified = false;
1152 ModuleBase_Operation* aCurrentOperation = myWorkshop->currentOperation();
1153 if (aCurrentOperation &&
1154 (PartSet_SketcherMgr::isSketchOperation(aCurrentOperation) ||
1155 sketchMgr()->isNestedSketchOperation(aCurrentOperation) ||
1156 (aCurrentOperation->id() == "Measurement")))
1158 double aLen = aView->Convert(SketcherPrs_Tools::getConfigArrowSize());
1160 double aPrevLen = SketcherPrs_Tools::getArrowSize();
1161 SketcherPrs_Tools::setArrowSize(aLen);
1162 const double aCurScale = aViewer->activeView()->Camera()->Scale();
1163 aViewer->SetScale(aViewer->activeView(), aCurScale);
1165 QList<Handle(AIS_InteractiveObject)> aPrsList = aDisplayer->displayedPresentations();
1166 foreach(Handle(AIS_InteractiveObject) aAisObj, aPrsList) {
1168 QList<AISObjectPtr> aPrsList = aDisplayer->displayedPresentations();
1169 foreach(AISObjectPtr aAIS, aPrsList) {
1170 Handle(AIS_InteractiveObject) aAisObj = aAIS->impl<Handle(AIS_InteractiveObject)>();
1172 Handle(AIS_Dimension) aDim = Handle(AIS_Dimension)::DownCast(aAisObj);
1173 if (!aDim.IsNull()) {
1174 aDim->DimensionAspect()->ArrowAspect()->SetLength(aLen);
1175 aContext->Redisplay(aDim, false);
1180 aDisplayer->updateViewer();
1185 //******************************************************
1186 bool PartSet_Module::isCustomPrsActivated(const ModuleBase_CustomizeFlag& theFlag) const
1188 return myCustomPrs->isActive(theFlag);
1191 //******************************************************
1192 void PartSet_Module::activateCustomPrs(const FeaturePtr& theFeature,
1193 const ModuleBase_CustomizeFlag& theFlag,
1194 const bool theUpdateViewer)
1196 myCustomPrs->activate(theFeature, theFlag, theUpdateViewer);
1199 //******************************************************
1200 void PartSet_Module::deactivateCustomPrs(const ModuleBase_CustomizeFlag& theFlag,
1201 const bool theUpdateViewer)
1203 myCustomPrs->deactivate(theFlag, theUpdateViewer);
1206 //******************************************************
1207 //bool PartSet_Module::customisePresentation(ResultPtr theResult, AISObjectPtr thePrs,
1208 // std::shared_ptr<GeomAPI_ICustomPrs> theCustomPrs)
1210 // bool aCustomized = false;
1212 // XGUI_Workshop* aWorkshop = getWorkshop();
1213 // XGUI_Displayer* aDisplayer = aWorkshop->displayer();
1214 // ObjectPtr anObject = aDisplayer->getObject(thePrs);
1216 // return aCustomized;
1218 // if (!theResult.get()) {
1219 // std::vector<int> aColor;
1220 // XGUI_CustomPrs::getDefaultColor(anObject, true, aColor);
1221 // if (!aColor.empty()) {
1222 // aCustomized = thePrs->setColor(aColor[0], aColor[1], aColor[2]);
1225 // // customize dimentional constrains
1226 // sketchMgr()->customisePresentation(anObject);
1228 // return aCustomized;
1231 ////******************************************************
1232 //bool PartSet_Module::afterCustomisePresentation(std::shared_ptr<ModelAPI_Result> theResult,
1233 // AISObjectPtr thePrs,
1234 // GeomCustomPrsPtr theCustomPrs)
1236 // bool aCustomized = false;
1238 // XGUI_Workshop* aWorkshop = getWorkshop();
1239 // XGUI_Displayer* aDisplayer = aWorkshop->displayer();
1240 // ObjectPtr anObject = aDisplayer->getObject(thePrs);
1242 // return aCustomized;
1244 // std::vector<int> aColor;
1245 // bool aUseCustomColor = true;
1246 // if (aUseCustomColor)
1247 // myOverconstraintListener->getCustomColor(anObject, aColor);
1248 // // customize sketch symbol presentation
1249 // Handle(AIS_InteractiveObject) anAISIO = thePrs->impl<Handle(AIS_InteractiveObject)>();
1250 // if (!anAISIO.IsNull()) {
1251 // if (!Handle(SketcherPrs_SymbolPrs)::DownCast(anAISIO).IsNull()) {
1252 // Handle(SketcherPrs_SymbolPrs) aPrs = Handle(SketcherPrs_SymbolPrs)::DownCast(anAISIO);
1253 // if (!aPrs.IsNull()) {
1254 // aPrs->SetCustomColor(aColor);
1255 // aCustomized = true;
1257 // } else if (!Handle(SketcherPrs_Coincident)::DownCast(anAISIO).IsNull()) {
1258 // Handle(SketcherPrs_Coincident) aPrs = Handle(SketcherPrs_Coincident)::DownCast(anAISIO);
1259 // if (!aPrs.IsNull()) {
1260 // aPrs->SetCustomColor(aColor);
1261 // aCustomized = true;
1265 // // customize sketch dimension constraint presentation
1266 // if (!aCustomized) {
1267 // if (!aColor.empty()) { // otherwise presentation has the default color
1268 // aCustomized = thePrs->setColor(aColor[0], aColor[1], aColor[2]);
1271 // return aCustomized;
1274 //******************************************************
1275 bool PartSet_Module::customizeFeature(ObjectPtr theObject, const ModuleBase_CustomizeFlag& theFlag,
1276 const bool theUpdateViewer)
1278 bool isRedisplayed = false;
1279 if (myCustomPrs->isActive(theFlag))
1280 isRedisplayed = myCustomPrs->redisplay(theObject, theFlag, theUpdateViewer);
1282 return isRedisplayed;
1285 //******************************************************
1286 void PartSet_Module::customizeObjectBrowser(QWidget* theObjectBrowser)
1288 XGUI_ObjectsBrowser* aOB = dynamic_cast<XGUI_ObjectsBrowser*>(theObjectBrowser);
1290 QLabel* aLabel = aOB->activeDocLabel();
1291 aLabel->installEventFilter(myMenuMgr);
1292 connect(aLabel, SIGNAL(customContextMenuRequested(const QPoint&)),
1293 SLOT(onActiveDocPopup(const QPoint&)));
1294 aOB->treeView()->setExpandsOnDoubleClick(false);
1295 connect(aOB->treeView(), SIGNAL(doubleClicked(const QModelIndex&)),
1296 SLOT(onTreeViewDoubleClick(const QModelIndex&)));
1298 Events_Loop* aLoop = Events_Loop::loop();
1299 aLoop->registerListener(this, Events_Loop::eventByName(EVENT_OBJECT_CREATED));
1303 //******************************************************
1304 void PartSet_Module::onActiveDocPopup(const QPoint& thePnt)
1306 SessionPtr aMgr = ModelAPI_Session::get();
1307 QAction* aActivatePartAction = myMenuMgr->action("ACTIVATE_PARTSET_CMD");
1309 XGUI_Workshop* aWorkshop = getWorkshop();
1310 QLabel* aHeader = aWorkshop->objectBrowser()->activeDocLabel();
1312 aActivatePartAction->setEnabled((aMgr->activeDocument() != aMgr->moduleDocument()));
1315 aMenu.addAction(aActivatePartAction);
1318 if (aMgr->activeDocument() == aMgr->moduleDocument()) {
1319 DocumentPtr aDoc = aMgr->moduleDocument();
1320 int aNbParts = aDoc->size(ModelAPI_ResultPart::group());
1321 bool aHaveToActivate = false;
1322 for (int i = 0; i < aNbParts; i++) {
1323 ObjectPtr aObj = aDoc->object(ModelAPI_ResultPart::group(), i);
1324 ResultPartPtr aPartRes = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aObj);
1325 if (!aPartRes->partDoc().get()) {
1326 aHaveToActivate = true;
1330 if (aHaveToActivate) {
1331 QAction* aActivateAllPartAction = myMenuMgr->action("ACTIVATE_ALL_PARTS_CMD");
1332 aMenu.addAction(aActivateAllPartAction);
1337 aMenu.exec(aHeader->mapToGlobal(thePnt));
1340 //******************************************************
1341 AISObjectPtr PartSet_Module::createPresentation(const ObjectPtr& theObject)
1343 Handle(AIS_InteractiveObject) anAISPrs = mySketchMgr->createPresentation(theObject);
1344 if (anAISPrs.IsNull()) {
1345 ResultPtr aResult = std::dynamic_pointer_cast<ModelAPI_Result>(theObject);
1346 if (aResult.get()) {
1347 std::shared_ptr<GeomAPI_Shape> aShapePtr = ModelAPI_Tools::shape(aResult);
1348 if (aShapePtr.get() != NULL)
1349 anAISPrs = new ModuleBase_ResultPrs(aResult);
1352 FieldStepPtr aStep =
1353 std::dynamic_pointer_cast<ModelAPI_ResultField::ModelAPI_FieldStep>(theObject);
1355 anAISPrs = new PartSet_FieldStepPrs(aStep);
1360 if (!anAISPrs.IsNull()) {
1361 Handle(AIS_Shape) aShapePrs = Handle(AIS_Shape)::DownCast(anAISPrs);
1362 if (!aShapePrs.IsNull())
1363 ModuleBase_Tools::setPointBallHighlighting((AIS_Shape*)aShapePrs.get());
1365 anAIS = AISObjectPtr(new GeomAPI_AISObject());
1366 anAIS->setImpl(new Handle(AIS_InteractiveObject)(anAISPrs));
1367 customizePresentation(theObject, anAIS);
1372 //******************************************************
1373 void getResultColor(const ResultPtr& theResult, std::vector<int>& theColor)
1375 ModelAPI_Tools::getColor(theResult, theColor);
1376 if (theColor.empty())
1377 PartSet_Tools::getDefaultColor(theResult, false, theColor);
1380 //******************************************************
1381 double getResultDeflection(const ResultPtr& theResult)
1383 double aDeflection = ModelAPI_Tools::getDeflection(theResult);
1384 if (aDeflection < 0)
1385 aDeflection = PartSet_Tools::getDefaultDeflection(theResult);
1389 //******************************************************
1390 double getResultTransparency(const ResultPtr& theResult)
1392 double aTransparency = ModelAPI_Tools::getTransparency(theResult);
1393 if (aTransparency < 0)
1394 aTransparency = PartSet_Tools::getDefaultTransparency();
1395 return aTransparency;
1399 //******************************************************
1400 void PartSet_Module::customizePresentation(const ObjectPtr& theObject,
1401 const AISObjectPtr& thePrs) const
1403 if (mySketchMgr->isObjectOfSketch(theObject)) {
1404 mySketchMgr->customizeSketchPresentation(theObject, thePrs);
1407 ResultPtr aResult = std::dynamic_pointer_cast<ModelAPI_Result>(theObject);
1408 if (aResult.get()) {
1409 std::vector<int> aColor;
1410 getResultColor(aResult, aColor);
1412 SessionPtr aMgr = ModelAPI_Session::get();
1413 if (aMgr->activeDocument() != aResult->document()) {
1414 QColor aQColor(aColor[0], aColor[1], aColor[2]);
1416 QColor::fromHsvF(aQColor.hueF(), aQColor.saturationF() / 3., aQColor.valueF());
1417 aColor[0] = aNewColor.red();
1418 aColor[1] = aNewColor.green();
1419 aColor[2] = aNewColor.blue();
1421 thePrs->setColor(aColor[0], aColor[1], aColor[2]);
1423 thePrs->setDeflection(getResultDeflection(aResult));
1425 thePrs->setTransparency(getResultTransparency(aResult));
1427 FeaturePtr aFeature = ModelAPI_Feature::feature(theObject);
1428 if (aFeature.get()) {
1429 if (aFeature->getKind() == SketchPlugin_Sketch::ID())
1430 thePrs->setWidth(2);
1436 //******************************************************
1437 ObjectPtr PartSet_Module::findPresentedObject(const AISObjectPtr& theAIS) const
1440 ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
1442 /// If last line finished on vertex the lines creation sequence has to be break
1443 ModuleBase_IPropertyPanel* aPanel = aOperation->propertyPanel();
1445 ModuleBase_ModelWidget* anActiveWidget = aPanel->activeWidget();
1446 // if there is an active widget, find the presented object in it
1447 if (!anActiveWidget)
1448 anActiveWidget = aPanel->preselectionWidget();
1450 ModuleBase_WidgetValidated* aWidgetValidated = dynamic_cast<ModuleBase_WidgetValidated*>
1452 if (aWidgetValidated)
1453 anObject = aWidgetValidated->findPresentedObject(theAIS);
1459 //******************************************************
1460 bool PartSet_Module::canBeShaded(Handle(AIS_InteractiveObject) theAIS) const
1462 bool aCanBeShaged = true;
1464 Handle(PartSet_ResultSketchPrs) aPrs = Handle(PartSet_ResultSketchPrs)::DownCast(theAIS);
1466 aCanBeShaged = false;
1468 return aCanBeShaged;
1471 //******************************************************
1472 void PartSet_Module::addObjectBrowserMenu(QMenu* theMenu) const
1474 QObjectPtrList aObjects = myWorkshop->selection()->selectedObjects();
1475 int aSelected = aObjects.size();
1476 SessionPtr aMgr = ModelAPI_Session::get();
1477 QAction* aActivatePartAction = myMenuMgr->action("ACTIVATE_PART_CMD");
1479 bool hasResult = false;
1480 bool hasFeature = false;
1481 bool hasParameter = false;
1482 bool hasCompositeOwner = false;
1483 bool hasResultInHistory = false;
1484 bool hasFolder = false;
1485 ModuleBase_Tools::checkObjects(aObjects, hasResult, hasFeature, hasParameter,
1486 hasCompositeOwner, hasResultInHistory, hasFolder);
1488 ModuleBase_Operation* aCurrentOp = myWorkshop->currentOperation();
1489 if (aSelected == 1) {
1490 ObjectPtr aObject = aObjects.first();
1492 ResultPartPtr aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aObject);
1493 FeaturePtr aFeature = std::dynamic_pointer_cast<ModelAPI_Feature>(aObject);
1494 bool isPart = aPart.get() ||
1495 (aFeature.get() && (aFeature->getKind() == PartSetPlugin_Part::ID()));
1497 DocumentPtr aPartDoc;
1499 aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aFeature->firstResult());
1501 if (aPart.get()) // this may be null is Part feature is disabled
1502 aPartDoc = aPart->partDoc();
1504 theMenu->addAction(aActivatePartAction);
1505 aActivatePartAction->setEnabled((aMgr->activeDocument() != aPartDoc));
1507 } else if (aObject->document() == aMgr->activeDocument()) {
1508 if (hasParameter || hasFeature) {
1509 myMenuMgr->action("EDIT_CMD")->setEnabled(true);
1510 theMenu->addAction(myMenuMgr->action("EDIT_CMD"));
1511 if (aCurrentOp && aFeature.get()) {
1512 if (aCurrentOp->id().toStdString() == aFeature->getKind())
1513 myMenuMgr->action("EDIT_CMD")->setEnabled(false);
1520 myMenuMgr->action("EDIT_CMD")->setEnabled(aCurrentOp == 0);
1521 theMenu->addAction(myMenuMgr->action("EDIT_CMD"));
1522 theMenu->addSeparator();
1525 bool aNotDeactivate = (aCurrentOp == 0);
1526 if (!aNotDeactivate) {
1527 aActivatePartAction->setEnabled(false);
1531 //******************************************************
1532 #define EXPAND_PARENT(OBJ) \
1533 QModelIndex aObjIndex = aDataModel->objectIndex(OBJ); \
1534 if (aObjIndex.isValid()) { \
1535 QModelIndex aParent = aObjIndex.parent(); \
1536 int aCount = aDataModel->rowCount(aParent); \
1538 aTreeView->setExpanded(aParent, true); \
1541 //******************************************************
1542 void PartSet_Module::processEvent(const std::shared_ptr<Events_Message>& theMessage)
1544 if (theMessage->eventID() == Events_Loop::loop()->eventByName(EVENT_DOCUMENT_CHANGED)) {
1545 // Do not change activation of parts if an operation active
1546 static QStringList aAllowActivationList;
1547 if (aAllowActivationList.isEmpty())
1548 aAllowActivationList <<
1549 QString(PartSetPlugin_Part::ID().c_str()) <<
1550 QString(PartSetPlugin_Duplicate::ID().c_str()) <<
1551 QString(PartSetPlugin_Remove::ID().c_str());
1552 if (myWorkshop->currentOperation() &&
1553 (!aAllowActivationList.contains(myWorkshop->currentOperation()->id())))
1555 XGUI_Workshop* aWorkshop = getWorkshop();
1556 XGUI_DataTree* aTreeView = aWorkshop->objectBrowser()->treeView();
1557 QLabel* aLabel = aWorkshop->objectBrowser()->activeDocLabel();
1558 QPalette aPalet = aLabel->palette();
1560 SessionPtr aMgr = ModelAPI_Session::get();
1561 DocumentPtr aActiveDoc = aMgr->activeDocument();
1563 // Clear active part index if there is no Part documents
1564 // It could be not null if document was closed and opened a new
1565 // without closeDocument call
1566 if (aMgr->allOpenedDocuments().size() <= 1)
1567 myActivePartIndex = QModelIndex();
1569 XGUI_DataModel* aDataModel = aWorkshop->objectBrowser()->dataModel();
1570 QModelIndex aOldActive = myActivePartIndex;
1571 myActivePartIndex = aDataModel->documentRootIndex(aActiveDoc, 0);
1572 bool needUpdate = false;
1573 if (myActivePartIndex.isValid()) {
1574 needUpdate = aTreeView->isExpanded(myActivePartIndex);
1576 aTreeView->setExpanded(myActivePartIndex, true);
1578 if ((aOldActive != myActivePartIndex) && (aOldActive.isValid()))
1579 aTreeView->setExpanded(aOldActive, false);
1581 aLabel->setPalette(aPalet);
1582 aWorkshop->updateCommandStatus();
1584 // Update displayed objects in order to update active color
1585 XGUI_Displayer* aDisplayer = aWorkshop->displayer();
1586 QObjectPtrList aObjects = aDisplayer->displayedObjects();
1588 foreach(ObjectPtr aObj, aObjects) {
1589 aHidden = !aObj->data() || !aObj->data()->isValid() ||
1590 aObj->isDisabled() || (!aObj->isDisplayed());
1592 aDisplayer->redisplay(aObj, false);
1595 aDisplayer->updateViewer();
1596 // Update tree items if they are expanded
1598 aTreeView->viewport()->update(aTreeView->viewport()->rect());
1600 } else if (theMessage->eventID() == Events_Loop::loop()->eventByName(EVENT_OBJECT_CREATED)) {
1601 std::shared_ptr<ModelAPI_ObjectUpdatedMessage> aUpdMsg =
1602 std::dynamic_pointer_cast<ModelAPI_ObjectUpdatedMessage>(theMessage);
1603 std::set<ObjectPtr> aObjects = aUpdMsg->objects();
1605 ObjectPtr aConstrObj;
1606 ObjectPtr aResultObj;
1607 std::set<ObjectPtr>::const_iterator aIt;
1608 DocumentPtr aRootDoc = ModelAPI_Session::get()->moduleDocument();
1609 for (aIt = aObjects.begin(); aIt != aObjects.end(); ++aIt) {
1610 ObjectPtr aObject = (*aIt);
1611 if ((!aResultObj.get()) && (aObject->groupName() == ModelAPI_ResultBody::group())
1612 && (aObject->document() != aRootDoc))
1613 aResultObj = aObject;
1614 if ((!aConstrObj.get()) && (aObject->groupName() == ModelAPI_ResultConstruction::group())
1615 && (aObject->document() != aRootDoc))
1616 aConstrObj = aObject;
1617 if (aResultObj.get() && aConstrObj.get())
1621 if (aResultObj.get() || aConstrObj.get()) {
1622 XGUI_Workshop* aWorkshop = getWorkshop();
1623 XGUI_DataTree* aTreeView = aWorkshop->objectBrowser()->treeView();
1624 XGUI_DataModel* aDataModel = aWorkshop->objectBrowser()->dataModel();
1626 if (aResultObj.get()) {
1627 EXPAND_PARENT(aResultObj)
1629 if (aConstrObj.get()) {
1630 EXPAND_PARENT(aConstrObj)
1634 else if (theMessage->eventID() == Events_Loop::loop()->eventByName(EVENT_OBJECT_TO_REDISPLAY)) {
1635 CompositeFeaturePtr aSketch = mySketchMgr->activeSketch();
1636 if (aSketch.get()) {
1637 ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
1638 if (PartSet_SketcherMgr::isSketchOperation(anOperation))
1639 mySketchMgr->previewSketchPlane()->createSketchPlane(aSketch, myWorkshop);
1644 //******************************************************
1645 void PartSet_Module::onTreeViewDoubleClick(const QModelIndex& theIndex)
1647 if (myWorkshop->currentOperation()) // Do not change activation of parts if an operation active
1649 SessionPtr aMgr = ModelAPI_Session::get();
1650 if (!theIndex.isValid()) {
1651 // It seems that this code is obsolete
1652 //aMgr->setActiveDocument(aMgr->moduleDocument());
1655 if (theIndex.column() != 1) // Use only first column
1658 XGUI_Workshop* aWorkshop = getWorkshop();
1659 XGUI_DataModel* aDataModel = aWorkshop->objectBrowser()->dataModel();
1660 // De not use non editable Indexes
1661 if ((aDataModel->flags(theIndex) & Qt::ItemIsSelectable) == 0)
1663 ObjectPtr aObj = aDataModel->object(theIndex);
1665 ResultPartPtr aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aObj);
1666 if (!aPart.get()) { // Probably this is Feature
1667 FeaturePtr aPartFeature = std::dynamic_pointer_cast<ModelAPI_Feature>(aObj);
1668 if (aPartFeature.get() && (aPartFeature->getKind() == PartSetPlugin_Part::ID())) {
1669 aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aPartFeature->firstResult());
1672 if (aPart.get()) { // if this is a part
1673 if (aPart->partDoc() == aMgr->activeDocument()) {
1674 myMenuMgr->activatePartSet();
1676 myMenuMgr->activatePart(aPart);
1681 //******************************************************
1682 void PartSet_Module::onViewCreated(ModuleBase_IViewWindow*)
1684 // z layer is created for all started operations in order to visualize operation AIS presentation
1686 Handle(AIS_InteractiveContext) aContext = myWorkshop->viewer()->AISContext();
1687 if (aContext.IsNull())
1690 Handle(V3d_Viewer) aViewer = aContext->CurrentViewer();
1691 if (myVisualLayerId == 0) {
1692 if (myVisualLayerId == 0)
1693 aViewer->AddZLayer(myVisualLayerId);
1695 TColStd_SequenceOfInteger aZList;
1696 aViewer->GetAllZLayers(aZList);
1697 bool aFound = false;
1698 for (int i = 1; i <= aZList.Length(); i++) {
1699 if (aZList(i) == myVisualLayerId) {
1705 aViewer->AddZLayer(myVisualLayerId);
1707 // if there is an active operation with validated widget,
1708 // the filters of this widget should be activated in the created view
1709 myWorkshop->selectionActivate()->updateSelectionFilters();
1710 myWorkshop->selectionActivate()->updateSelectionModes();
1713 //******************************************************
1714 void PartSet_Module::widgetStateChanged(int thePreviousState)
1716 mySketchMgr->widgetStateChanged(thePreviousState);
1719 //******************************************************
1720 bool PartSet_Module::processEnter(const std::string& thePreviousAttributeID)
1722 return mySketchReentrantMgr->processEnter(thePreviousAttributeID);
1725 //******************************************************
1726 void PartSet_Module::beforeOperationStopped(ModuleBase_Operation* theOperation)
1728 if (PartSet_SketcherMgr::isSketchOperation(theOperation)) {
1729 mySketchMgr->stopSketch(theOperation);
1733 //******************************************************
1734 GeomShapePtr PartSet_Module::findShape(const AttributePtr& theAttribute)
1736 GeomShapePtr aGeomShape;
1738 ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
1739 if (anOperation && sketchMgr()->isNestedSketchOperation(anOperation)) {
1740 aGeomShape = PartSet_Tools::findShapeBy2DPoint(theAttribute, myWorkshop);
1745 //******************************************************
1746 AttributePtr PartSet_Module::findAttribute(const ObjectPtr& theObject,
1747 const GeomShapePtr& theGeomShape)
1749 AttributePtr anAttribute;
1750 GeomShapePtr aGeomShape = theGeomShape;
1751 if (!aGeomShape.get()) {
1752 // processing shape of result, e.g. sketch circle center is selected, this is a result
1753 // the geom shape is empty, the shape of result should be used
1754 ResultPtr aResult = std::dynamic_pointer_cast<ModelAPI_Result>(theObject);
1755 if (aResult.get()) {
1756 aGeomShape = aResult->shape();
1760 if (aGeomShape.get()) {
1761 TopoDS_Shape aTDSShape = aGeomShape->impl<TopoDS_Shape>();
1762 std::pair<AttributePtr, int> anAttrAndIndex =
1763 PartSet_Tools::findAttributeBy2dPoint(theObject, aTDSShape, mySketchMgr->activeSketch());
1764 return anAttrAndIndex.first;
1769 //******************************************************
1770 std::shared_ptr<Events_Message> PartSet_Module::reentrantMessage()
1772 return sketchReentranceMgr()->reentrantMessage();
1775 //******************************************************
1776 void PartSet_Module::setReentrantPreSelection(const std::shared_ptr<Events_Message>& theMessage)
1778 sketchReentranceMgr()->setReentrantPreSelection(theMessage);
1781 //******************************************************
1782 void PartSet_Module::onChoiceChanged(ModuleBase_ModelWidget* theWidget,
1785 ModuleBase_WidgetChoice* aChoiceWidget = dynamic_cast<ModuleBase_WidgetChoice*>(theWidget);
1789 QString aChoiceTitle = aChoiceWidget->getPropertyPanelTitle(theIndex);
1790 if (!aChoiceTitle.isEmpty()) {
1791 ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
1794 ModuleBase_IPropertyPanel* aPanel = aOperation->propertyPanel();
1796 aPanel->setWindowTitle(aChoiceTitle);
1800 //******************************************************
1801 XGUI_Workshop* PartSet_Module::getWorkshop() const
1803 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
1804 return aConnector->workshop();
1807 void PartSet_Module::setDefaultConstraintShown()
1809 myHasConstraintShown[PartSet_Tools::Geometrical] = true;
1810 myHasConstraintShown[PartSet_Tools::Dimensional] = true;
1811 myHasConstraintShown[PartSet_Tools::Expressions] = false;
1814 //******************************************************
1815 ModuleBase_ITreeNode* PartSet_Module::rootNode() const
1820 //******************************************************
1821 void PartSet_Module::disableCustomMode(ModuleBase_CustomizeFlag theMode) {
1822 myCustomPrs->disableCustomMode(theMode);
1825 //******************************************************
1826 void PartSet_Module::enableCustomModes() {
1827 myCustomPrs->enableCustomModes();