1 // Copyright (C) 2014-20xx CEA/DEN, EDF R&D
3 #include "PartSet_Module.h"
4 #include "PartSet_WidgetSketchLabel.h"
5 #include "PartSet_Validators.h"
6 #include "PartSet_Tools.h"
7 #include "PartSet_PreviewPlanes.h"
8 #include "PartSet_WidgetPoint2d.h"
9 #include "PartSet_WidgetPoint2dDistance.h"
10 #include "PartSet_WidgetPoint2DFlyout.h"
11 #include "PartSet_WidgetShapeSelector.h"
12 #include "PartSet_WidgetMultiSelector.h"
13 #include "PartSet_WidgetEditor.h"
14 #include "PartSet_WidgetFileSelector.h"
15 #include "PartSet_WidgetSketchCreator.h"
16 #include "PartSet_SketcherMgr.h"
17 #include "PartSet_SketcherReetntrantMgr.h"
18 #include "PartSet_ResultSketchPrs.h"
19 #include "PartSet_MenuMgr.h"
20 #include "PartSet_CustomPrs.h"
21 #include "PartSet_IconFactory.h"
22 #include "PartSet_WidgetChoice.h"
23 #include "PartSet_OverconstraintListener.h"
25 #include "PartSet_Filters.h"
26 #include "PartSet_FilterInfinite.h"
28 #include <PartSetPlugin_Remove.h>
29 #include <PartSetPlugin_Part.h>
30 #include <PartSetPlugin_Duplicate.h>
32 #include <ModuleBase_Operation.h>
33 #include <ModuleBase_OperationAction.h>
34 #include <ModuleBase_IViewer.h>
35 #include <ModuleBase_IViewWindow.h>
36 #include <ModuleBase_IPropertyPanel.h>
37 #include <ModuleBase_WidgetEditor.h>
38 #include <ModuleBase_WidgetValidated.h>
39 #include <ModuleBase_FilterFactory.h>
40 #include <ModuleBase_Tools.h>
41 #include <ModuleBase_OperationFeature.h>
42 #include <ModuleBase_WidgetFactory.h>
43 #include <ModuleBase_OperationDescription.h>
44 #include <ModuleBase_ViewerPrs.h>
46 #include <ModelAPI_Object.h>
47 #include <ModelAPI_Events.h>
48 #include <ModelAPI_Validator.h>
49 #include <ModelAPI_Data.h>
50 #include <ModelAPI_Session.h>
51 #include <ModelAPI_ResultBody.h>
52 #include <ModelAPI_AttributeString.h>
53 #include <ModelAPI_AttributeSelectionList.h>
54 #include <ModelAPI_Tools.h>
56 #include <GeomDataAPI_Point2D.h>
57 #include <GeomDataAPI_Point.h>
58 #include <GeomDataAPI_Dir.h>
60 #include <XGUI_Displayer.h>
61 #include <XGUI_Workshop.h>
62 #include <XGUI_OperationMgr.h>
63 #include <XGUI_PropertyPanel.h>
64 #include <XGUI_ModuleConnector.h>
65 #include <XGUI_ContextMenuMgr.h>
66 #include <XGUI_Tools.h>
67 #include <XGUI_ObjectsBrowser.h>
68 #include <XGUI_SelectionMgr.h>
69 #include <XGUI_DataModel.h>
70 #include <XGUI_ErrorMgr.h>
71 #include <XGUI_CustomPrs.h>
72 #include <XGUI_SelectionMgr.h>
74 #include <SketchPlugin_Feature.h>
75 #include <SketchPlugin_Sketch.h>
76 #include <SketchPlugin_ConstraintAngle.h>
77 #include <SketchPlugin_ConstraintLength.h>
78 #include <SketchPlugin_ConstraintDistance.h>
79 #include <SketchPlugin_ConstraintParallel.h>
80 #include <SketchPlugin_ConstraintPerpendicular.h>
81 #include <SketchPlugin_ConstraintRadius.h>
83 #include <SketcherPrs_SymbolPrs.h>
84 #include <SketcherPrs_Coincident.h>
85 #include <SketcherPrs_Tools.h>
87 #include <Events_Loop.h>
88 #include <Config_PropManager.h>
89 #include <Config_Keywords.h>
91 #include <StdSelect_TypeOfFace.hxx>
92 #include <TopoDS_Vertex.hxx>
94 #include <TopoDS_Shape.hxx>
95 #include <BRep_Tool.hxx>
96 #include <AIS_Dimension.hxx>
99 #include <QMouseEvent>
102 #include <QApplication>
103 #include <QMessageBox>
104 #include <QMainWindow>
108 #include <GeomAlgoAPI_FaceBuilder.h>
109 #include <GeomDataAPI_Dir.h>
111 #include <SelectMgr_ListIteratorOfListOfFilter.hxx>
117 /*!Create and return new instance of XGUI_Module*/
118 extern "C" PARTSET_EXPORT ModuleBase_IModule* createModule(ModuleBase_IWorkshop* theWshop)
120 return new PartSet_Module(theWshop);
123 PartSet_Module::PartSet_Module(ModuleBase_IWorkshop* theWshop)
124 : ModuleBase_IModule(theWshop),
127 new PartSet_IconFactory();
129 mySketchMgr = new PartSet_SketcherMgr(this);
130 mySketchReentrantMgr = new PartSet_SketcherReetntrantMgr(theWshop);
132 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(theWshop);
133 XGUI_Workshop* aWorkshop = aConnector->workshop();
135 ModuleBase_IViewer* aViewer = theWshop->viewer();
136 connect(aViewer, SIGNAL(keyRelease(ModuleBase_IViewWindow*, QKeyEvent*)),
137 this, SLOT(onKeyRelease(ModuleBase_IViewWindow*, QKeyEvent*)));
138 connect(aViewer, SIGNAL(viewTransformed(int)),
139 SLOT(onViewTransformed(int)));
140 connect(aViewer, SIGNAL(viewCreated(ModuleBase_IViewWindow*)),
141 SLOT(onViewCreated(ModuleBase_IViewWindow*)));
142 myMenuMgr = new PartSet_MenuMgr(this);
143 myCustomPrs = new PartSet_CustomPrs(theWshop);
145 myOverconstraintListener = new PartSet_OverconstraintListener(theWshop);
147 Events_Loop* aLoop = Events_Loop::loop();
148 aLoop->registerListener(this, Events_Loop::eventByName(EVENT_DOCUMENT_CHANGED));
150 mySelectionFilters.Append(new PartSet_GlobalFilter(myWorkshop));
151 mySelectionFilters.Append(new PartSet_FilterInfinite(myWorkshop));
153 setDefaultConstraintShown();
155 Config_PropManager::registerProp("Visualization", "operation_parameter_color",
156 "Reference shape wireframe color in operation", Config_Prop::Color,
157 PartSet_CustomPrs::OPERATION_PARAMETER_COLOR());
158 Config_PropManager::registerProp("Visualization", "operation_result_color",
159 "Result shape wireframe color in operation", Config_Prop::Color,
160 PartSet_CustomPrs::OPERATION_RESULT_COLOR());
161 Config_PropManager::registerProp("Visualization", "operation_highlight_color",
162 "Multi selector item color in operation", Config_Prop::Color,
163 PartSet_CustomPrs::OPERATION_HIGHLIGHT_COLOR());
166 PartSet_Module::~PartSet_Module()
168 SelectMgr_ListIteratorOfListOfFilter aIt(mySelectionFilters);
169 for (; aIt.More(); aIt.Next()) {
170 Handle(SelectMgr_Filter) aFilter = aIt.Value();
171 if (!aFilter.IsNull())
175 delete myOverconstraintListener;
178 void PartSet_Module::activateSelectionFilters()
180 SelectMgr_ListIteratorOfListOfFilter aIt(mySelectionFilters);
181 for (; aIt.More(); aIt.Next()) {
182 Handle(SelectMgr_Filter) aFilter = aIt.Value();
183 if (!aFilter.IsNull())
184 myWorkshop->viewer()->addSelectionFilter(aFilter);
188 void PartSet_Module::deactivateSelectionFilters()
190 SelectMgr_ListIteratorOfListOfFilter aIt(mySelectionFilters);
191 for (; aIt.More(); aIt.Next()) {
192 Handle(SelectMgr_Filter) aFilter = aIt.Value();
193 if (!aFilter.IsNull())
194 myWorkshop->viewer()->removeSelectionFilter(aFilter);
198 void PartSet_Module::storeSelection()
200 sketchMgr()->storeSelection();
203 void PartSet_Module::restoreSelection()
205 sketchMgr()->restoreSelection();
208 void PartSet_Module::registerValidators()
210 //Registering of validators
211 SessionPtr aMgr = ModelAPI_Session::get();
212 ModelAPI_ValidatorsFactory* aFactory = aMgr->validators();
213 aFactory->registerValidator("PartSet_DistanceSelection", new PartSet_DistanceSelection);
214 aFactory->registerValidator("PartSet_LengthSelection", new PartSet_LengthSelection);
215 aFactory->registerValidator("PartSet_PerpendicularSelection", new PartSet_PerpendicularSelection);
216 aFactory->registerValidator("PartSet_ParallelSelection", new PartSet_ParallelSelection);
217 aFactory->registerValidator("PartSet_RadiusSelection", new PartSet_RadiusSelection);
218 aFactory->registerValidator("PartSet_RigidSelection", new PartSet_RigidSelection);
219 aFactory->registerValidator("PartSet_CoincidentSelection", new PartSet_CoincidentSelection);
220 aFactory->registerValidator("PartSet_HVDirSelection", new PartSet_HVDirSelection);
221 aFactory->registerValidator("PartSet_TangentSelection", new PartSet_TangentSelection);
222 aFactory->registerValidator("PartSet_FilletSelection", new PartSet_FilletSelection);
223 aFactory->registerValidator("PartSet_AngleSelection", new PartSet_AngleSelection);
224 aFactory->registerValidator("PartSet_EqualSelection", new PartSet_EqualSelection);
225 aFactory->registerValidator("PartSet_CollinearSelection", new PartSet_CollinearSelection);
226 aFactory->registerValidator("PartSet_MiddlePointSelection", new PartSet_MiddlePointSelection);
227 aFactory->registerValidator("PartSet_DifferentObjects", new PartSet_DifferentObjectsValidator);
228 aFactory->registerValidator("PartSet_CoincidentAttr", new PartSet_CoincidentAttr);
231 void PartSet_Module::registerFilters()
233 //Registering of selection filters
234 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
235 ModuleBase_FilterFactory* aFactory = aConnector->selectionFilters();
238 void PartSet_Module::registerProperties()
240 Config_PropManager::registerProp("Sketch planes", "planes_size", "Size", Config_Prop::Double,
242 Config_PropManager::registerProp("Sketch planes", "planes_thickness", "Thickness",
243 Config_Prop::Integer, SKETCH_WIDTH);
244 Config_PropManager::registerProp("Sketch planes", "rotate_to_plane", "Rotate to plane when selected",
245 Config_Prop::Boolean, "false");
248 void PartSet_Module::connectToPropertyPanel(ModuleBase_ModelWidget* theWidget, const bool isToConnect)
250 mySketchMgr->connectToPropertyPanel(theWidget, isToConnect);
253 void PartSet_Module::operationCommitted(ModuleBase_Operation* theOperation)
255 if (PartSet_SketcherMgr::isNestedSketchOperation(theOperation)) {
256 mySketchMgr->commitNestedSketch(theOperation);
259 /// Restart sketcher operations automatically
260 if (!mySketchReentrantMgr->operationCommitted(theOperation)) {
262 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>(theOperation);
263 if (aFOperation && !aFOperation->isEditOperation()) {
264 // the selection is cleared after commit the create operation
265 // in order to do not use the same selected objects in the restarted operation
266 // for common behaviour, the selection is cleared even if the operation is not restarted
267 getWorkshop()->selector()->clearSelection();
272 void PartSet_Module::operationAborted(ModuleBase_Operation* theOperation)
274 /// Restart sketcher operations automatically
275 mySketchReentrantMgr->operationAborted(theOperation);
278 void PartSet_Module::operationStarted(ModuleBase_Operation* theOperation)
280 ModuleBase_IWorkshop* anIWorkshop = workshop();
281 if (!theOperation->getDescription()->hasXmlRepresentation()) { //!< No need for property panel
282 anIWorkshop->updateCommandStatus();
285 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>
288 XGUI_Workshop* aWorkshop = XGUI_Tools::workshop(anIWorkshop);
289 XGUI_PropertyPanel* aPropertyPanel = aWorkshop->propertyPanel();
290 ModuleBase_ModelWidget* aFilledWidget = 0;
291 bool aPostonedWidgetActivation = false;
292 FeaturePtr aFeature = aFOperation->feature();
294 std::string aGreedAttributeId = ModuleBase_Tools::findGreedAttribute(anIWorkshop, aFeature);
295 // if there is a greed attribute, automatic commit by preselection for this feature is prohibited
296 aWorkshop->setPropertyPanel(aFOperation);
298 // filling the operation values by the current selection
299 // if the operation can be committed after the controls filling, the method perform should
300 // be stopped. Otherwise unnecessary presentations can be shown(e.g. operation prs in sketch)
301 bool isOperationCommitted = false;
302 if (!aFOperation->isEditOperation()) {
303 aFilledWidget = aFOperation->activateByPreselection(aGreedAttributeId);
304 if (currentOperation() != aFOperation)
305 isOperationCommitted = true;
307 if (aGreedAttributeId.empty()) {
308 // a signal should be emitted before the next widget activation
309 // because, the activation of the next widget will give a focus to the widget. As a result
310 // the value of the widget is initialized. And commit may happens until the value is entered.
312 if (mySketchReentrantMgr->canBeCommittedByPreselection())
313 isOperationCommitted = mySketchMgr->operationActivatedByPreselection();
314 // activate the next obligatory widget
315 if (!isOperationCommitted)
316 aPropertyPanel->activateNextWidget(aFilledWidget);
319 else { // there is a greed widget
320 const QList<ModuleBase_ModelWidget*>& aWidgets = aPropertyPanel->modelWidgets();
321 std::string aFirstAttributeId = aWidgets.front()->attributeID();
322 // activate next widget after greeded if it is the first widget in the panel
323 // else the first panel widget is already activated by operation start
324 if (aFirstAttributeId == aGreedAttributeId)
325 aPostonedWidgetActivation = true;
328 } if (!isOperationCommitted) {
329 anIWorkshop->updateCommandStatus();
330 aWorkshop->connectToPropertyPanel(true);
331 operationStartedInternal(aFOperation);
333 // the objects of the current operation should be deactivated
334 QObjectPtrList anObjects;
335 anObjects.append(aFeature);
336 std::list<ResultPtr> aResults;
337 ModelAPI_Tools::allResults(aFeature, aResults);
338 std::list<ResultPtr>::const_iterator aIt;
339 for (aIt = aResults.begin(); aIt != aResults.end(); ++aIt) {
340 anObjects.append(*aIt);
342 QObjectPtrList::const_iterator anIt = anObjects.begin(), aLast = anObjects.end();
343 for (; anIt != aLast; anIt++)
344 aWorkshop->deactivateActiveObject(*anIt, false);
345 if (anObjects.size() > 0) {
346 XGUI_Displayer* aDisplayer = aWorkshop->displayer();
347 aDisplayer->updateViewer();
350 if (aPostonedWidgetActivation) {
351 // if the widget is an empty in the chain of activated widgets, the current operation
352 // is restarted. It should be performed after functionality of the operation starting
353 aPropertyPanel->activateNextWidget(aFilledWidget);
359 void PartSet_Module::operationStartedInternal(ModuleBase_Operation* theOperation)
361 /// Restart sketcher operations automatically
362 mySketchReentrantMgr->operationStarted(theOperation);
364 if (PartSet_SketcherMgr::isSketchOperation(theOperation)) {
365 mySketchMgr->startSketch(theOperation);
367 else if (PartSet_SketcherMgr::isNestedSketchOperation(theOperation)) {
368 mySketchMgr->startNestedSketch(theOperation);
371 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>(theOperation);
373 myCustomPrs->activate(aFOperation->feature(), ModuleBase_IModule::CustomizeArguments, true);
374 myCustomPrs->activate(aFOperation->feature(), ModuleBase_IModule::CustomizeResults, true);
378 void PartSet_Module::operationResumed(ModuleBase_Operation* theOperation)
380 ModuleBase_IModule::operationResumed(theOperation);
382 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>(theOperation);
384 myCustomPrs->activate(aFOperation->feature(), ModuleBase_IModule::CustomizeArguments, true);
385 myCustomPrs->activate(aFOperation->feature(), ModuleBase_IModule::CustomizeResults, true);
389 void PartSet_Module::operationStopped(ModuleBase_Operation* theOperation)
391 bool isModifiedArgs = myCustomPrs->deactivate(ModuleBase_IModule::CustomizeArguments, false);
392 bool isModifiedResults = myCustomPrs->deactivate(ModuleBase_IModule::CustomizeResults, false);
393 bool isModified = isModifiedArgs || isModifiedResults;
395 if (PartSet_SketcherMgr::isNestedSketchOperation(theOperation)) {
396 mySketchMgr->stopNestedSketch(theOperation);
398 else if (PartSet_SketcherMgr::isSketchOperation(theOperation))
399 setDefaultConstraintShown();
401 //VSV: Viewer is updated on feature update and redisplay
403 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(myWorkshop);
404 XGUI_Displayer* aDisplayer = aConnector->workshop()->displayer();
405 aDisplayer->updateViewer();
408 QMap<PartSet_Tools::ConstraintVisibleState, bool>::const_iterator anIt = myHasConstraintShown.begin(),
409 aLast = myHasConstraintShown.end();
410 for (; anIt != aLast; anIt++) {
411 mySketchMgr->updateBySketchParameters(anIt.key(), anIt.value());
415 ModuleBase_Operation* PartSet_Module::currentOperation() const
417 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
418 XGUI_OperationMgr* anOpMgr = aConnector->workshop()->operationMgr();
419 return anOpMgr->currentOperation();
422 bool PartSet_Module::canUndo() const
424 bool aCanUndo = false;
425 SessionPtr aMgr = ModelAPI_Session::get();
426 if (aMgr->hasModuleDocument() && aMgr->canUndo()) {
427 aCanUndo = !aMgr->isOperation();
428 if (!aCanUndo) // check the enable state additionally by sketch manager
429 aCanUndo = aMgr->canUndo();
434 bool PartSet_Module::canRedo() const
436 bool aCanRedo = false;
437 SessionPtr aMgr = ModelAPI_Session::get();
438 if (aMgr->hasModuleDocument() && aMgr->canRedo()) {
439 aCanRedo = !aMgr->isOperation();
440 if (!aCanRedo) // check the enable state additionally by sketch manager
441 aCanRedo = aMgr->canRedo();
446 bool PartSet_Module::canApplyAction(const ObjectPtr& theObject, const QString& theActionId) const
449 if (theActionId == "MOVE_CMD") {
450 FeaturePtr aFeature = ModelAPI_Feature::feature(theObject);
452 ResultPtr aResult = ModuleBase_Tools::firstResult(aFeature);
453 // part features can not be moved in the history.
454 if (aResult.get() && aResult->groupName() == ModelAPI_ResultPart::group())
461 bool PartSet_Module::canEraseObject(const ObjectPtr& theObject) const
463 // the sketch manager put the restriction to the objects erase
464 return mySketchMgr->canEraseObject(theObject);
467 bool PartSet_Module::canDisplayObject(const ObjectPtr& theObject) const
469 // the sketch manager put the restriction to the objects display
470 return mySketchMgr->canDisplayObject(theObject);
473 /*void PartSet_Module::processHiddenObject(const std::list<ObjectPtr>& theObjects)
475 mySketchMgr->processHiddenObject(theObjects);
478 bool PartSet_Module::canActivateSelection(const ObjectPtr& theObject) const
480 bool aCanActivate = ModuleBase_IModule::canActivateSelection(theObject);
482 ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
483 bool isSketchOp = PartSet_SketcherMgr::isSketchOperation(anOperation),
484 isNestedOp = PartSet_SketcherMgr::isNestedSketchOperation(anOperation);
485 if (isSketchOp || isNestedOp) {
486 // in active sketch operation it is possible to activate operation object in selection
487 // in the edit operation, e.g. points of the line can be moved when the line is edited
488 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>(anOperation);
489 aCanActivate = aCanActivate || (aFOperation && aFOperation->isEditOperation());
494 bool PartSet_Module::addViewerMenu(const QMap<QString, QAction*>& theStdActions,
496 QMap<int, QAction*>& theMenuActions) const
498 return myMenuMgr->addViewerMenu(theStdActions, theParent, theMenuActions);
501 void PartSet_Module::updateViewerMenu(const QMap<QString, QAction*>& theStdActions)
503 myMenuMgr->updateViewerMenu(theStdActions);
506 QString PartSet_Module::getFeatureError(const FeaturePtr& theFeature)
508 QString anError = ModuleBase_IModule::getFeatureError(theFeature);
509 if (anError.isEmpty())
510 anError = sketchMgr()->getFeatureError(theFeature);
515 void PartSet_Module::grantedOperationIds(ModuleBase_Operation* theOperation,
516 QStringList& theIds) const
518 myMenuMgr->grantedOperationIds(theOperation, theIds);
520 if (PartSet_SketcherMgr::isSketchOperation(theOperation)) {
521 XGUI_Workshop* aWorkshop = getWorkshop();
522 theIds.append(aWorkshop->contextMenuMgr()->action("DELETE_CMD")->text());
526 void PartSet_Module::activeSelectionModes(QIntList& theModes)
529 if (mySketchMgr->activeSketch().get())
530 PartSet_SketcherMgr::sketchSelectionModes(theModes);
533 void PartSet_Module::customSubShapesSelectionModes(QIntList& theTypes)
535 if (theTypes.contains(TopAbs_FACE))
536 theTypes.append(SketcherPrs_Tools::Sel_Sketch_Face);
537 if (theTypes.contains(TopAbs_WIRE))
538 theTypes.append(SketcherPrs_Tools::Sel_Sketch_Wire);
541 bool PartSet_Module::isMouseOverWindow()
543 return mySketchMgr->isMouseOverWindow();
546 void PartSet_Module::closeDocument()
551 void PartSet_Module::clearViewer()
553 myCustomPrs->clearPrs();
555 XGUI_Workshop* aWorkshop = getWorkshop();
556 XGUI_Displayer* aDisplayer = aWorkshop->displayer();
557 aDisplayer->deactivateSelectionFilters();
560 void PartSet_Module::propertyPanelDefined(ModuleBase_Operation* theOperation)
562 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>(theOperation);
566 ModuleBase_IPropertyPanel* aPanel = aFOperation->propertyPanel();
567 // we have to manually activate the sketch label in edit mode
568 if (PartSet_SketcherMgr::isSketchOperation(aFOperation) && (aFOperation->isEditOperation()))
569 aPanel->activateWidget(aPanel->modelWidgets().first());
572 bool PartSet_Module::createWidgets(ModuleBase_Operation* theOperation,
573 QList<ModuleBase_ModelWidget*>& theWidgets) const
575 bool aProcessed = false;
577 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>(theOperation);
578 XGUI_Workshop* aWorkshop = getWorkshop();
579 XGUI_PropertyPanel* aPropertyPanel = aWorkshop->propertyPanel();
580 if (mySketchMgr->activeSketch().get() && aFOperation && aPropertyPanel) {
581 ModuleBase_ISelection* aSelection = workshop()->selection();
582 // click on a point in sketch leads here with the point is highlighted, not yet selected
583 QList<ModuleBase_ViewerPrsPtr> aPreselection = aSelection->getHighlighted();
584 if (aPreselection.size() == 1) {
585 ModuleBase_ViewerPrsPtr aSelectedPrs = aPreselection[0];
586 ObjectPtr anObject = aSelectedPrs->object();
588 FeaturePtr aFeature = ModelAPI_Feature::feature(anObject);
589 FeaturePtr anOpFeature = aFOperation->feature();
590 GeomShapePtr aShape = aSelectedPrs->shape();
591 // click on the digit of dimension constrain comes here with an empty shape, so we need the check
592 if (aFeature == anOpFeature && aShape.get() && !aShape->isNull()) {
593 const TopoDS_Shape& aTDShape = aShape->impl<TopoDS_Shape>();
594 AttributePtr anAttribute = PartSet_Tools::findAttributeBy2dPoint(anObject, aTDShape,
595 mySketchMgr->activeSketch());
596 if (anAttribute.get()) {
597 QString aXmlRepr = aFOperation->getDescription()->xmlRepresentation();
598 ModuleBase_WidgetFactory aFactory(aXmlRepr.toStdString(), workshop());
600 const std::string anAttributeId = anAttribute->id();
601 aFactory.createWidget(aPropertyPanel->contentWidget(), anAttributeId);
603 theWidgets = aFactory.getModelWidgets();
604 // it is possible that the point does not present in XML definition,
605 // in this case, we assume that it is not processed by this module
606 // e.g. "Intersection point" feature
607 aProcessed = !theWidgets.isEmpty();
615 void PartSet_Module::onSelectionChanged()
617 ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
621 bool isSketcherOp = false;
622 // An edit operation is enable only if the current opeation is the sketch operation
623 if (mySketchMgr->activeSketch()) {
624 if (PartSet_Tools::sketchPlane(mySketchMgr->activeSketch()))
625 isSketcherOp = PartSet_SketcherMgr::isSketchOperation(aOperation);
628 // Editing of constraints can be done on selection
629 ModuleBase_ISelection* aSelect = myWorkshop->selection();
630 QList<ModuleBase_ViewerPrsPtr> aSelected = aSelect->getSelected();
631 if (aSelected.size() == 1) {
632 ModuleBase_ViewerPrsPtr aPrs = aSelected.first();
633 ObjectPtr aObject = aPrs->object();
634 FeaturePtr aFeature = ModelAPI_Feature::feature(aObject);
636 std::string aId = aFeature->getKind();
637 if ((aId == SketchPlugin_ConstraintRadius::ID()) ||
638 (aId == SketchPlugin_ConstraintLength::ID()) ||
639 (aId == SketchPlugin_ConstraintDistance::ID()) ||
640 (aId == SketchPlugin_ConstraintAngle::ID())) {
641 editFeature(aFeature);
648 void PartSet_Module::onKeyRelease(ModuleBase_IViewWindow* theWnd, QKeyEvent* theEvent)
650 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
651 XGUI_OperationMgr* anOpMgr = aConnector->workshop()->operationMgr();
652 anOpMgr->onKeyReleased(theWnd->viewPort(), theEvent);
655 ModuleBase_ModelWidget* PartSet_Module::createWidgetByType(const std::string& theType,
657 Config_WidgetAPI* theWidgetApi)
659 ModuleBase_IWorkshop* aWorkshop = workshop();
660 XGUI_Workshop* aXUIWorkshop = getWorkshop();
661 ModuleBase_ModelWidget* aWgt = NULL;
662 if (theType == "sketch-start-label") {
663 PartSet_WidgetSketchLabel* aLabelWgt = new PartSet_WidgetSketchLabel(theParent, aWorkshop,
664 theWidgetApi, myHasConstraintShown);
665 connect(aLabelWgt, SIGNAL(planeSelected(const std::shared_ptr<GeomAPI_Pln>&)),
666 mySketchMgr, SLOT(onPlaneSelected(const std::shared_ptr<GeomAPI_Pln>&)));
667 connect(aLabelWgt, SIGNAL(showConstraintToggled(int, bool)),
668 mySketchMgr, SLOT(onShowConstraintsToggle(int, bool)));
670 } else if (theType == "sketch-2dpoint_selector") {
671 PartSet_WidgetPoint2D* aPointWgt = new PartSet_WidgetPoint2D(theParent, aWorkshop,
673 aPointWgt->setSketch(mySketchMgr->activeSketch());
674 connect(aPointWgt, SIGNAL(vertexSelected()), sketchReentranceMgr(), SLOT(onVertexSelected()));
676 }else if (theType == "sketch-2dpoint_flyout_selector") {
677 PartSet_WidgetPoint2DFlyout* aPointWgt = new PartSet_WidgetPoint2DFlyout(theParent, aWorkshop,
679 aPointWgt->setSketch(mySketchMgr->activeSketch());
680 connect(aPointWgt, SIGNAL(vertexSelected()), sketchReentranceMgr(), SLOT(onVertexSelected()));
682 } else if (theType == "point2ddistance") {
683 PartSet_WidgetPoint2dDistance* aDistanceWgt = new PartSet_WidgetPoint2dDistance(theParent,
684 aWorkshop, theWidgetApi);
685 aDistanceWgt->setSketch(mySketchMgr->activeSketch());
687 } else if (theType == "sketch_shape_selector") {
688 PartSet_WidgetShapeSelector* aShapeSelectorWgt =
689 new PartSet_WidgetShapeSelector(theParent, aWorkshop, theWidgetApi);
690 aShapeSelectorWgt->setSketcher(mySketchMgr->activeSketch());
691 aWgt = aShapeSelectorWgt;
692 } else if (theType == "sketch_multi_selector") {
693 PartSet_WidgetMultiSelector* aShapeSelectorWgt =
694 new PartSet_WidgetMultiSelector(theParent, aWorkshop, theWidgetApi);
695 aShapeSelectorWgt->setSketcher(mySketchMgr->activeSketch());
696 aWgt = aShapeSelectorWgt;
698 else if (theType == WDG_DOUBLEVALUE_EDITOR) {
699 aWgt = new PartSet_WidgetEditor(theParent, aWorkshop, theWidgetApi);
700 } else if (theType == "export_file_selector") {
701 aWgt = new PartSet_WidgetFileSelector(theParent, aWorkshop, theWidgetApi);
702 } else if (theType == "sketch_launcher") {
703 aWgt = new PartSet_WidgetSketchCreator(theParent, this, theWidgetApi);
704 } else if (theType == "module_choice") {
705 aWgt = new PartSet_WidgetChoice(theParent, theWidgetApi);
706 connect(aWgt, SIGNAL(itemSelected(ModuleBase_ModelWidget*, int)),
707 this, SLOT(onChoiceChanged(ModuleBase_ModelWidget*, int)));
712 ModuleBase_ModelWidget* PartSet_Module::activeWidget() const
714 ModuleBase_ModelWidget* anActiveWidget = 0;
716 anActiveWidget = mySketchReentrantMgr->internalActiveWidget();
717 if (!anActiveWidget) {
718 ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
720 ModuleBase_IPropertyPanel* aPanel = aOperation->propertyPanel();
721 anActiveWidget = aPanel->activeWidget();
724 return anActiveWidget;
727 bool PartSet_Module::deleteObjects()
729 bool isProcessed = false;
731 XGUI_Workshop* aWorkshop = getWorkshop();
732 XGUI_OperationMgr* anOpMgr = aWorkshop->operationMgr();
734 //SessionPtr aMgr = ModelAPI_Session::get();
735 // 1. check whether the delete should be processed in the module
736 ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
737 bool isSketchOp = PartSet_SketcherMgr::isSketchOperation(anOperation),
738 isNestedOp = PartSet_SketcherMgr::isNestedSketchOperation(anOperation);
739 if (isSketchOp || isNestedOp) {
741 // 2. find selected presentations
742 // selected objects should be collected before the current operation abort because
743 // the abort leads to selection lost on constraint objects. It can be corrected after #386 issue
744 ModuleBase_ISelection* aSel = workshop()->selection();
745 QObjectPtrList aSelectedObj = aSel->selectedPresentations();
746 // if there are no selected objects in the viewer, that means that the selection in another
747 // place cased this method. It is necessary to return the false value to understande in above
748 // method that delete is not processed
749 if (aSelectedObj.count() == 0)
752 // avoid delete of the objects, which are not belong to the current sketch
753 // in order to do not delete results of other sketches
754 QObjectPtrList aSketchObjects;
755 QObjectPtrList::const_iterator anIt = aSelectedObj.begin(), aLast = aSelectedObj.end();
756 for ( ; anIt != aLast; anIt++) {
757 ObjectPtr anObject = *anIt;
758 if (mySketchMgr->isObjectOfSketch(anObject)) {
759 // sketch feature should be used in this list because workshop deletes features only
760 // results are skipped
761 FeaturePtr aSketchFeature = ModelAPI_Feature::feature(anObject);
762 aSketchObjects.append(aSketchFeature);
765 // if the selection contains only local selected presentations from other sketches,
766 // the Delete operation should not be done at all
767 if (aSketchObjects.size() == 0)
770 // 3. start operation
771 QString aDescription = aWorkshop->contextMenuMgr()->action("DELETE_CMD")->text();
772 ModuleBase_OperationAction* anOpAction = new ModuleBase_OperationAction(aDescription, this);
774 // the active nested sketch operation should be aborted unconditionally
775 // the Delete action should be additionally granted for the Sketch operation
776 // in order to do not abort/commit it
777 if (!anOpMgr->canStartOperation(anOpAction->id()))
778 return true; // the objects are processed but can not be deleted
780 anOpMgr->startOperation(anOpAction);
782 // WORKAROUND, should be done to avoid viewer highlight update after deletetion of objects
783 // the problem is in AIS Dimensions recompute if a line and the dim are removed, line is the first
784 // it causes the AIS recompute, where the base line is null, the result is empty AIS in the viewer
785 XGUI_Tools::workshop(myWorkshop)->selector()->clearSelection();
787 // 4. delete features
788 // sketch feature should be skipped, only sub-features can be removed
789 // when sketch operation is active
790 aWorkshop->deleteFeatures(aSketchObjects);
792 anOpMgr->commitOperation();
797 void PartSet_Module::onFeatureTriggered()
799 // is commented for imp: Unpressing the button of the current action must behave like
800 // a validation if the entity can be created (instead of Cancel, as currently)
801 /*QAction* aCmd = dynamic_cast<QAction*>(sender());
802 if (aCmd->isCheckable() && aCmd->isChecked()) {
803 // 1. check whether the delete should be processed in the module
804 ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
805 bool isNestedOp = PartSet_SketcherMgr::isNestedCreateOperation(anOperation);
807 // in case if in the viewer nothing is displayed, the create operation should not be
808 // comitted even if all values of the feature are initialized
809 if (!mySketchMgr->canDisplayCurrentCreatedFeature()) {
810 // the action information should be saved before the operation is aborted
811 // because this abort leads to update command status, which unchecks this action
812 anOperation->abort();
813 launchOperation(aCmd->data().toString());
817 ModuleBase_IModule::onFeatureTriggered();
820 void PartSet_Module::editFeature(FeaturePtr theFeature)
822 storeConstraintsState(theFeature->getKind());
823 ModuleBase_IModule::editFeature(theFeature);
826 bool PartSet_Module::canCommitOperation() const
831 void PartSet_Module::launchOperation(const QString& theCmdId,
832 const bool isUpdatePropertyPanel)
834 storeConstraintsState(theCmdId.toStdString());
835 updateConstraintsState(theCmdId.toStdString());
837 ModuleBase_IModule::launchOperation(theCmdId, isUpdatePropertyPanel);
840 void PartSet_Module::storeConstraintsState(const std::string& theFeatureKind)
842 if (myWorkshop->currentOperation() &&
843 myWorkshop->currentOperation()->id().toStdString() == SketchPlugin_Sketch::ID()) {
844 const QMap<PartSet_Tools::ConstraintVisibleState, bool>& aShownStates =
845 mySketchMgr->showConstraintStates();
846 myHasConstraintShown = aShownStates;
850 void PartSet_Module::updateConstraintsState(const std::string& theFeatureKind)
852 if (PartSet_SketcherMgr::constraintsIdList().contains(theFeatureKind.c_str())) {
853 // Show constraints if a constraint was anOperation
854 mySketchMgr->updateBySketchParameters(PartSet_Tools::Geometrical, true);
855 mySketchMgr->updateBySketchParameters(PartSet_Tools::Dimensional, true);
856 mySketchMgr->updateBySketchParameters(PartSet_Tools::Expressions,
857 myHasConstraintShown[PartSet_Tools::Expressions]);
861 void PartSet_Module::onObjectDisplayed(ObjectPtr theObject, AISObjectPtr theAIS)
863 Handle(AIS_InteractiveObject) anAIS = theAIS->impl<Handle(AIS_InteractiveObject)>();
864 if (!anAIS.IsNull()) {
865 Handle(AIS_InteractiveContext) aCtx = anAIS->GetContext();
866 Handle(AIS_Dimension) aDim = Handle(AIS_Dimension)::DownCast(anAIS);
867 if (!aDim.IsNull()) {
868 aCtx->SetZLayer(aDim, myVisualLayerId);
870 Handle(SketcherPrs_SymbolPrs) aCons = Handle(SketcherPrs_SymbolPrs)::DownCast(anAIS);
872 aCtx->SetZLayer(aCons, myVisualLayerId);
877 void PartSet_Module::onBeforeObjectErase(ObjectPtr theObject, AISObjectPtr theAIS)
880 // it should be recomputed in order to disappear in the viewer if the corresponded object
882 //if (myCustomPrs->isActive())
883 // myCustomPrs->redisplay(theObject, false);
886 void PartSet_Module::onViewTransformed(int theTrsfType)
888 // Set length of arrows constant in pixel size
889 // if the operation is panning or rotate or panglobal then do nothing
890 if ((theTrsfType == 1) || (theTrsfType == 3) || (theTrsfType == 4))
892 ModuleBase_IViewer* aViewer = myWorkshop->viewer();
893 Handle(AIS_InteractiveContext) aContext = aViewer->AISContext();
894 if (aContext.IsNull())
897 //Handle(V3d_View) aView = aViewer->activeView();
899 XGUI_Workshop* aWorkshop = getWorkshop();
900 XGUI_Displayer* aDisplayer = aWorkshop->displayer();
901 Handle(V3d_Viewer) aV3dViewer = aContext->CurrentViewer();
902 Handle(V3d_View) aView;
904 for (aV3dViewer->InitDefinedViews();
905 aV3dViewer->MoreDefinedViews();
906 aV3dViewer->NextDefinedViews()) {
907 Handle(V3d_View) aV = aV3dViewer->DefinedView();
908 double aS = aV->Scale();
916 double aLen = aView->Convert(SketcherPrs_Tools::getDefaultArrowSize());
918 double aPrevLen = SketcherPrs_Tools::getArrowSize();
919 SketcherPrs_Tools::setArrowSize(aLen);
920 const double aPrevScale = aViewer->Scale(aViewer->activeView());
921 const double aCurScale = aViewer->activeView()->Camera()->Scale();
922 aViewer->SetScale(aViewer->activeView(), aCurScale);
923 SketcherPrs_Tools::setTextHeight (aCurScale / aPrevScale * SketcherPrs_Tools::getTextHeight());
924 bool isModified = false;
925 QList<AISObjectPtr> aPrsList = aDisplayer->displayedPresentations();
926 foreach (AISObjectPtr aAIS, aPrsList) {
927 Handle(AIS_InteractiveObject) aAisObj = aAIS->impl<Handle(AIS_InteractiveObject)>();
929 Handle(AIS_Dimension) aDim = Handle(AIS_Dimension)::DownCast(aAisObj);
930 if (!aDim.IsNull()) {
931 aDim->DimensionAspect()->ArrowAspect()->SetLength(aLen);
932 aContext->Redisplay(aDim, false);
937 aDisplayer->updateViewer();
940 void PartSet_Module::activateCustomPrs(const FeaturePtr& theFeature, const ModuleBase_CustomizeFlag& theFlag,
941 const bool theUpdateViewer)
943 myCustomPrs->activate(theFeature, theFlag, theUpdateViewer);
946 void PartSet_Module::deactivateCustomPrs(const ModuleBase_CustomizeFlag& theFlag,
947 const bool theUpdateViewer)
949 myCustomPrs->deactivate(theFlag, theUpdateViewer);
952 bool PartSet_Module::customisePresentation(ResultPtr theResult, AISObjectPtr thePrs,
953 std::shared_ptr<GeomAPI_ICustomPrs> theCustomPrs)
955 bool aCustomized = false;
957 XGUI_Workshop* aWorkshop = getWorkshop();
958 XGUI_Displayer* aDisplayer = aWorkshop->displayer();
959 ObjectPtr anObject = aDisplayer->getObject(thePrs);
963 if (!theResult.get()) {
964 bool isConflicting = myOverconstraintListener->isConflictingObject(anObject);
965 // customize sketch symbol presentation
967 Handle(AIS_InteractiveObject) anAISIO = thePrs->impl<Handle(AIS_InteractiveObject)>();
968 if (!anAISIO.IsNull()) {
969 if (!Handle(SketcherPrs_SymbolPrs)::DownCast(anAISIO).IsNull()) {
970 Handle(SketcherPrs_SymbolPrs) aPrs = Handle(SketcherPrs_SymbolPrs)::DownCast(anAISIO);
971 if (!aPrs.IsNull()) {
972 std::vector<int> aColor;
973 myOverconstraintListener->getConflictingColor(aColor);
974 aPrs->SetConflictingConstraint(isConflicting, aColor);
977 } else if (!Handle(SketcherPrs_Coincident)::DownCast(anAISIO).IsNull()) {
978 Handle(SketcherPrs_Coincident) aPrs = Handle(SketcherPrs_Coincident)::DownCast(anAISIO);
979 if (!aPrs.IsNull()) {
980 std::vector<int> aColor;
981 myOverconstraintListener->getConflictingColor(aColor);
982 aPrs->SetConflictingConstraint(isConflicting, aColor);
988 // customize sketch dimension constraint presentation
990 std::vector<int> aColor;
992 myOverconstraintListener->getConflictingColor(aColor);
995 XGUI_CustomPrs::getDefaultColor(anObject, true, aColor);
996 if (!aColor.empty()) {
997 aCustomized = thePrs->setColor(aColor[0], aColor[1], aColor[2]);
1001 // customize dimentional constrains
1002 sketchMgr()->customizePresentation(anObject);
1007 bool PartSet_Module::customizeObject(ObjectPtr theObject, const ModuleBase_CustomizeFlag& theFlag,
1008 const bool theUpdateViewer)
1010 bool isRedisplayed = false;
1011 if (myCustomPrs->isActive(theFlag))
1012 isRedisplayed = myCustomPrs->redisplay(theObject, theFlag, theUpdateViewer);
1014 return isRedisplayed;
1017 void PartSet_Module::customizeObjectBrowser(QWidget* theObjectBrowser)
1019 XGUI_ObjectsBrowser* aOB = dynamic_cast<XGUI_ObjectsBrowser*>(theObjectBrowser);
1021 QLabel* aLabel = aOB->activeDocLabel();
1022 aLabel->installEventFilter(myMenuMgr);
1023 connect(aLabel, SIGNAL(customContextMenuRequested(const QPoint&)),
1024 SLOT(onActiveDocPopup(const QPoint&)));
1025 //QPalette aPalet = aLabel->palette();
1026 //aPalet.setColor(QPalette::Text, QColor(0, 72, 140));
1027 //aLabel->setPalette(aPalet);
1028 aOB->treeView()->setExpandsOnDoubleClick(false);
1029 connect(aOB->treeView(), SIGNAL(doubleClicked(const QModelIndex&)),
1030 SLOT(onTreeViewDoubleClick(const QModelIndex&)));
1034 void PartSet_Module::onActiveDocPopup(const QPoint& thePnt)
1036 SessionPtr aMgr = ModelAPI_Session::get();
1037 QAction* aActivatePartAction = myMenuMgr->action("ACTIVATE_PARTSET_CMD");
1039 XGUI_Workshop* aWorkshop = getWorkshop();
1040 QLabel* aHeader = aWorkshop->objectBrowser()->activeDocLabel();
1042 aActivatePartAction->setEnabled((aMgr->activeDocument() != aMgr->moduleDocument()));
1045 aMenu.addAction(aActivatePartAction);
1046 aMenu.exec(aHeader->mapToGlobal(thePnt));
1049 Handle(AIS_InteractiveObject) PartSet_Module::createPresentation(const ResultPtr& theResult)
1051 return mySketchMgr->createPresentation(theResult);
1055 ObjectPtr PartSet_Module::findPresentedObject(const AISObjectPtr& theAIS) const
1058 ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
1060 /// If last line finished on vertex the lines creation sequence has to be break
1061 ModuleBase_IPropertyPanel* aPanel = aOperation->propertyPanel();
1063 ModuleBase_ModelWidget* anActiveWidget = aPanel->activeWidget();
1064 // if there is an active widget, find the presented object in it
1065 if (!anActiveWidget)
1066 anActiveWidget = aPanel->preselectionWidget();
1068 ModuleBase_WidgetValidated* aWidgetValidated = dynamic_cast<ModuleBase_WidgetValidated*>
1070 if (aWidgetValidated)
1071 anObject = aWidgetValidated->findPresentedObject(theAIS);
1077 bool PartSet_Module::canBeShaded(Handle(AIS_InteractiveObject) theAIS) const
1079 bool aCanBeShaged = true;
1081 Handle(PartSet_ResultSketchPrs) aPrs = Handle(PartSet_ResultSketchPrs)::DownCast(theAIS);
1083 aCanBeShaged = false;
1085 return aCanBeShaged;
1088 void PartSet_Module::addObjectBrowserMenu(QMenu* theMenu) const
1090 QObjectPtrList aObjects = myWorkshop->selection()->selectedObjects();
1091 int aSelected = aObjects.size();
1092 SessionPtr aMgr = ModelAPI_Session::get();
1093 QAction* aActivatePartAction = myMenuMgr->action("ACTIVATE_PART_CMD");
1095 ModuleBase_Operation* aCurrentOp = myWorkshop->currentOperation();
1096 if (aSelected == 1) {
1097 bool hasResult = false;
1098 bool hasFeature = false;
1099 bool hasParameter = false;
1100 bool hasCompositeOwner = false;
1101 ModuleBase_Tools::checkObjects(aObjects, hasResult, hasFeature, hasParameter,
1103 ObjectPtr aObject = aObjects.first();
1105 ResultPartPtr aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aObject);
1106 FeaturePtr aFeature = std::dynamic_pointer_cast<ModelAPI_Feature>(aObject);
1107 bool isPart = aPart.get() ||
1108 (aFeature.get() && (aFeature->getKind() == PartSetPlugin_Part::ID()));
1110 DocumentPtr aPartDoc;
1112 aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aFeature->firstResult());
1114 if (aPart.get()) // this may be null is Part feature is disabled
1115 aPartDoc = aPart->partDoc();
1117 theMenu->addAction(aActivatePartAction);
1118 aActivatePartAction->setEnabled((aMgr->activeDocument() != aPartDoc));
1120 } else if (aObject->document() == aMgr->activeDocument()) {
1121 if (hasParameter || hasFeature) {
1122 myMenuMgr->action("EDIT_CMD")->setEnabled(true);
1123 theMenu->addAction(myMenuMgr->action("EDIT_CMD"));
1124 if (aCurrentOp && aFeature.get()) {
1125 if (aCurrentOp->id().toStdString() == aFeature->getKind())
1126 myMenuMgr->action("EDIT_CMD")->setEnabled(false);
1131 ResultBodyPtr aResult = std::dynamic_pointer_cast<ModelAPI_ResultBody>(aObject);
1133 theMenu->addAction(myMenuMgr->action("SELECT_PARENT_CMD"));
1136 bool aNotDeactivate = (aCurrentOp == 0);
1137 if (!aNotDeactivate) {
1138 aActivatePartAction->setEnabled(false);
1142 void PartSet_Module::processEvent(const std::shared_ptr<Events_Message>& theMessage)
1144 if (theMessage->eventID() == Events_Loop::loop()->eventByName(EVENT_DOCUMENT_CHANGED)) {
1145 // Do not change activation of parts if an operation active
1146 static QStringList aAllowActivationList;
1147 if (aAllowActivationList.isEmpty())
1148 aAllowActivationList <<
1149 QString(PartSetPlugin_Part::ID().c_str()) <<
1150 QString(PartSetPlugin_Duplicate::ID().c_str()) <<
1151 QString(PartSetPlugin_Remove::ID().c_str());
1152 if (myWorkshop->currentOperation() &&
1153 (!aAllowActivationList.contains(myWorkshop->currentOperation()->id())))
1155 XGUI_Workshop* aWorkshop = getWorkshop();
1156 XGUI_DataTree* aTreeView = aWorkshop->objectBrowser()->treeView();
1157 QLabel* aLabel = aWorkshop->objectBrowser()->activeDocLabel();
1158 QPalette aPalet = aLabel->palette();
1160 SessionPtr aMgr = ModelAPI_Session::get();
1161 DocumentPtr aActiveDoc = aMgr->activeDocument();
1162 if (aActivePartIndex.isValid())
1163 aTreeView->setExpanded(aActivePartIndex, false);
1164 XGUI_DataModel* aDataModel = aWorkshop->objectBrowser()->dataModel();
1165 aActivePartIndex = aDataModel->documentRootIndex(aActiveDoc);
1166 if (aActivePartIndex.isValid())
1167 aTreeView->setExpanded(aActivePartIndex, true);
1169 aLabel->setPalette(aPalet);
1170 aWorkshop->updateCommandStatus();
1172 // Update displayed objects in order to update active color
1173 XGUI_Displayer* aDisplayer = aWorkshop->displayer();
1174 QObjectPtrList aObjects = aDisplayer->displayedObjects();
1176 foreach(ObjectPtr aObj, aObjects) {
1177 //TODO: replace by redisplay event.
1178 aHidden = !aObj->data() || !aObj->data()->isValid() ||
1179 aObj->isDisabled() || (!aObj->isDisplayed());
1181 aDisplayer->redisplay(aObj, false);
1183 aDisplayer->updateViewer();
1187 void PartSet_Module::onTreeViewDoubleClick(const QModelIndex& theIndex)
1189 if (myWorkshop->currentOperation()) // Do not change activation of parts if an operation active
1191 SessionPtr aMgr = ModelAPI_Session::get();
1192 if (!theIndex.isValid()) {
1193 aMgr->setActiveDocument(aMgr->moduleDocument());
1196 if (theIndex.column() != 0) // Use only first column
1199 XGUI_Workshop* aWorkshop = getWorkshop();
1200 XGUI_DataModel* aDataModel = aWorkshop->objectBrowser()->dataModel();
1201 // De not use non editable Indexes
1202 if ((aDataModel->flags(theIndex) & Qt::ItemIsSelectable) == 0)
1204 ObjectPtr aObj = aDataModel->object(theIndex);
1206 ResultPartPtr aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aObj);
1207 if (!aPart.get()) { // Probably this is Feature
1208 FeaturePtr aPartFeature = std::dynamic_pointer_cast<ModelAPI_Feature>(aObj);
1209 if (aPartFeature.get() && (aPartFeature->getKind() == PartSetPlugin_Part::ID())) {
1210 aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aPartFeature->firstResult());
1213 if (aPart.get()) { // if this is a part
1214 if (aPart->partDoc() == aMgr->activeDocument()) {
1215 myMenuMgr->activatePartSet();
1223 void PartSet_Module::onViewCreated(ModuleBase_IViewWindow*)
1225 // z layer is created for all started operations in order to visualize operation AIS presentation
1227 Handle(AIS_InteractiveContext) aContext = myWorkshop->viewer()->AISContext();
1228 if (aContext.IsNull())
1231 Handle(V3d_Viewer) aViewer = aContext->CurrentViewer();
1232 if (myVisualLayerId == 0) {
1233 if (myVisualLayerId == 0)
1234 aViewer->AddZLayer(myVisualLayerId);
1236 TColStd_SequenceOfInteger aZList;
1237 aViewer->GetAllZLayers(aZList);
1238 bool aFound = false;
1239 for (int i = 1; i <= aZList.Length(); i++) {
1240 if (aZList(i) == myVisualLayerId) {
1246 aViewer->AddZLayer(myVisualLayerId);
1248 // if there is an active operation with validated widget,
1249 // the filters of this widget should be activated in the created view
1250 ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
1252 ModuleBase_ModelWidget* anActiveWidget = activeWidget();
1253 if (anActiveWidget) {
1254 ModuleBase_WidgetSelector* aWSelector = dynamic_cast<ModuleBase_WidgetSelector*>(anActiveWidget);
1256 aWSelector->activateSelectionAndFilters(true);
1261 //******************************************************
1262 void PartSet_Module::widgetStateChanged(int thePreviousState)
1264 mySketchMgr->widgetStateChanged(thePreviousState);
1267 bool PartSet_Module::processEnter(const std::string& thePreviousAttributeID)
1269 return mySketchReentrantMgr->processEnter(thePreviousAttributeID);
1272 //******************************************************
1273 void PartSet_Module::beforeOperationStarted(ModuleBase_Operation* theOperation)
1277 //******************************************************
1278 void PartSet_Module::beforeOperationStopped(ModuleBase_Operation* theOperation)
1280 if (PartSet_SketcherMgr::isSketchOperation(theOperation)) {
1281 mySketchMgr->stopSketch(theOperation);
1285 //******************************************************
1286 GeomShapePtr PartSet_Module::findShape(const AttributePtr& theAttribute)
1288 GeomShapePtr aGeomShape;
1290 ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
1291 if (anOperation && PartSet_SketcherMgr::isNestedSketchOperation(anOperation)) {
1292 aGeomShape = PartSet_Tools::findShapeBy2DPoint(theAttribute, myWorkshop);
1297 //******************************************************
1298 AttributePtr PartSet_Module::findAttribute(const ObjectPtr& theObject,
1299 const GeomShapePtr& theGeomShape)
1301 AttributePtr anAttribute;
1302 GeomShapePtr aGeomShape = theGeomShape;
1303 if (!aGeomShape.get()) {
1304 // processing shape of result, e.g. sketch circle center is selected, this is a result
1305 // the geom shape is empty, the shape of result should be used
1306 ResultPtr aResult = std::dynamic_pointer_cast<ModelAPI_Result>(theObject);
1307 if (aResult.get()) {
1308 aGeomShape = aResult->shape();
1312 if (aGeomShape.get()) {
1313 TopoDS_Shape aTDSShape = aGeomShape->impl<TopoDS_Shape>();
1314 return PartSet_Tools::findAttributeBy2dPoint(theObject, aTDSShape,
1315 mySketchMgr->activeSketch());
1320 //******************************************************
1321 void PartSet_Module::onChoiceChanged(ModuleBase_ModelWidget* theWidget,
1324 PartSet_WidgetChoice* aChoiceWidget = dynamic_cast<PartSet_WidgetChoice*>(theWidget);
1328 QString aChoiceTitle = aChoiceWidget->getPropertyPanelTitle(theIndex);
1329 if (!aChoiceTitle.isEmpty()) {
1330 ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
1333 ModuleBase_IPropertyPanel* aPanel = aOperation->propertyPanel();
1335 aPanel->setWindowTitle(aChoiceTitle);
1339 //******************************************************
1340 XGUI_Workshop* PartSet_Module::getWorkshop() const
1342 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
1343 return aConnector->workshop();
1346 //******************************************************
1347 void PartSet_Module::setDefaultConstraintShown()
1349 myHasConstraintShown[PartSet_Tools::Geometrical] = true;
1350 myHasConstraintShown[PartSet_Tools::Dimensional] = true;
1351 myHasConstraintShown[PartSet_Tools::Expressions] = false;