1 // Copyright (C) 2014-20xx CEA/DEN, EDF R&D
3 #include "PartSet_Module.h"
4 #include "PartSet_WidgetSketchLabel.h"
5 #include "PartSet_Validators.h"
6 #include "PartSet_Tools.h"
7 #include "PartSet_WidgetPoint2d.h"
8 #include "PartSet_WidgetPoint2dDistance.h"
9 #include "PartSet_WidgetShapeSelector.h"
10 #include "PartSet_WidgetPoint2dAngle.h"
11 #include "PartSet_WidgetMultiSelector.h"
12 #include "PartSet_WidgetEditor.h"
13 #include "PartSet_WidgetFileSelector.h"
14 #include "PartSet_WidgetSketchCreator.h"
15 #include "PartSet_SketcherMgr.h"
16 #include "PartSet_MenuMgr.h"
17 #include "PartSet_CustomPrs.h"
18 #include "PartSet_IconFactory.h"
20 #include "PartSet_Filters.h"
21 #include "PartSet_FilterInfinite.h"
23 #include <PartSetPlugin_Remove.h>
24 #include <PartSetPlugin_Part.h>
25 #include <PartSetPlugin_Duplicate.h>
27 #include <ModuleBase_Operation.h>
28 #include <ModuleBase_OperationAction.h>
29 #include <ModuleBase_IViewer.h>
30 #include <ModuleBase_IViewWindow.h>
31 #include <ModuleBase_IPropertyPanel.h>
32 #include <ModuleBase_WidgetEditor.h>
33 #include <ModuleBase_WidgetValidated.h>
34 #include <ModuleBase_FilterFactory.h>
35 #include <ModuleBase_Tools.h>
36 #include <ModuleBase_OperationFeature.h>
38 #include <GeomValidators_ShapeType.h>
39 #include <GeomValidators_Finite.h>
40 #include <GeomValidators_Face.h>
41 #include <GeomValidators_ConstructionComposite.h>
42 #include <GeomValidators_ZeroOffset.h>
43 #include <GeomValidators_BooleanArguments.h>
44 #include <GeomValidators_Different.h>
47 #include <ModelAPI_Object.h>
48 #include <ModelAPI_Events.h>
49 #include <ModelAPI_Validator.h>
50 #include <ModelAPI_Data.h>
51 #include <ModelAPI_Session.h>
52 #include <GeomValidators_DifferentShapes.h>
53 #include <ModelAPI_ResultBody.h>
55 #include <GeomDataAPI_Point2D.h>
56 #include <GeomDataAPI_Point.h>
57 #include <GeomDataAPI_Dir.h>
59 #include <XGUI_Displayer.h>
60 #include <XGUI_Workshop.h>
61 #include <XGUI_OperationMgr.h>
62 #include <XGUI_PropertyPanel.h>
63 #include <XGUI_ModuleConnector.h>
64 #include <XGUI_ContextMenuMgr.h>
65 #include <XGUI_Tools.h>
66 #include <XGUI_ObjectsBrowser.h>
67 #include <XGUI_SelectionMgr.h>
68 #include <XGUI_DataModel.h>
70 #include <SketchPlugin_Feature.h>
71 #include <SketchPlugin_Sketch.h>
72 #include <SketchPlugin_Line.h>
73 #include <SketchPlugin_Arc.h>
74 #include <SketchPlugin_Circle.h>
75 #include <SketchPlugin_Point.h>
76 #include <SketchPlugin_ConstraintAngle.h>
77 #include <SketchPlugin_ConstraintLength.h>
78 #include <SketchPlugin_ConstraintDistance.h>
79 #include <SketchPlugin_ConstraintParallel.h>
80 #include <SketchPlugin_ConstraintPerpendicular.h>
81 #include <SketchPlugin_ConstraintRadius.h>
83 #include <SketcherPrs_SymbolPrs.h>
84 #include <SketcherPrs_Tools.h>
86 #include <Events_Loop.h>
87 #include <Config_PropManager.h>
88 #include <Config_Keywords.h>
90 #include <StdSelect_TypeOfFace.hxx>
91 #include <TopoDS_Vertex.hxx>
93 #include <TopoDS_Shape.hxx>
94 #include <BRep_Tool.hxx>
95 #include <AIS_Dimension.hxx>
98 #include <QMouseEvent>
101 #include <QApplication>
102 #include <QMessageBox>
103 #include <QMainWindow>
106 #include <GeomAlgoAPI_FaceBuilder.h>
107 #include <GeomDataAPI_Dir.h>
109 #include <SelectMgr_ListIteratorOfListOfFilter.hxx>
115 /*!Create and return new instance of XGUI_Module*/
116 extern "C" PARTSET_EXPORT ModuleBase_IModule* createModule(ModuleBase_IWorkshop* theWshop)
118 return new PartSet_Module(theWshop);
121 PartSet_Module::PartSet_Module(ModuleBase_IWorkshop* theWshop)
122 : ModuleBase_IModule(theWshop),
123 myRestartingMode(RM_None), myVisualLayerId(0)
125 new PartSet_IconFactory();
127 mySketchMgr = new PartSet_SketcherMgr(this);
128 myDataModel = new PartSet_DocumentDataModel(this);
130 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(theWshop);
131 XGUI_Workshop* aWorkshop = aConnector->workshop();
133 XGUI_OperationMgr* anOpMgr = aWorkshop->operationMgr();
134 connect(anOpMgr, SIGNAL(keyEnterReleased()), this, SLOT(onEnterReleased()));
135 connect(anOpMgr, SIGNAL(operationActivatedByPreselection()),
136 this, SLOT(onOperationActivatedByPreselection()));
138 ModuleBase_IViewer* aViewer = theWshop->viewer();
139 connect(aViewer, SIGNAL(keyRelease(ModuleBase_IViewWindow*, QKeyEvent*)),
140 this, SLOT(onKeyRelease(ModuleBase_IViewWindow*, QKeyEvent*)));
141 connect(aViewer, SIGNAL(viewTransformed(int)),
142 SLOT(onViewTransformed(int)));
143 connect(aViewer, SIGNAL(viewCreated(ModuleBase_IViewWindow*)),
144 SLOT(onViewCreated(ModuleBase_IViewWindow*)));
146 myMenuMgr = new PartSet_MenuMgr(this);
147 myCustomPrs = new PartSet_CustomPrs(theWshop);
149 Events_Loop* aLoop = Events_Loop::loop();
150 aLoop->registerListener(this, Events_Loop::eventByName(EVENT_DOCUMENT_CHANGED));
152 mySelectionFilters.Append(new PartSet_GlobalFilter(myWorkshop));
153 mySelectionFilters.Append(new PartSet_FilterInfinite(myWorkshop));
156 PartSet_Module::~PartSet_Module()
158 SelectMgr_ListIteratorOfListOfFilter aIt(mySelectionFilters);
159 for (; aIt.More(); aIt.Next()) {
160 Handle(SelectMgr_Filter) aFilter = aIt.Value();
161 if (!aFilter.IsNull())
167 void PartSet_Module::activateSelectionFilters()
169 SelectMgr_ListIteratorOfListOfFilter aIt(mySelectionFilters);
170 for (; aIt.More(); aIt.Next()) {
171 Handle(SelectMgr_Filter) aFilter = aIt.Value();
172 if (!aFilter.IsNull())
173 myWorkshop->viewer()->addSelectionFilter(aFilter);
177 void PartSet_Module::deactivateSelectionFilters()
179 SelectMgr_ListIteratorOfListOfFilter aIt(mySelectionFilters);
180 for (; aIt.More(); aIt.Next()) {
181 Handle(SelectMgr_Filter) aFilter = aIt.Value();
182 if (!aFilter.IsNull())
183 myWorkshop->viewer()->removeSelectionFilter(aFilter);
187 void PartSet_Module::registerValidators()
189 //Registering of validators
190 SessionPtr aMgr = ModelAPI_Session::get();
191 ModelAPI_ValidatorsFactory* aFactory = aMgr->validators();
192 aFactory->registerValidator("PartSet_DistanceSelection", new PartSet_DistanceSelection);
193 aFactory->registerValidator("PartSet_LengthSelection", new PartSet_LengthSelection);
194 aFactory->registerValidator("PartSet_PerpendicularSelection", new PartSet_PerpendicularSelection);
195 aFactory->registerValidator("PartSet_ParallelSelection", new PartSet_ParallelSelection);
196 aFactory->registerValidator("PartSet_RadiusSelection", new PartSet_RadiusSelection);
197 aFactory->registerValidator("PartSet_RigidSelection", new PartSet_RigidSelection);
198 aFactory->registerValidator("PartSet_CoincidentSelection", new PartSet_CoincidentSelection);
199 aFactory->registerValidator("PartSet_HVDirSelection", new PartSet_HVDirSelection);
200 aFactory->registerValidator("PartSet_TangentSelection", new PartSet_TangentSelection);
201 aFactory->registerValidator("PartSet_FilletSelection", new PartSet_FilletSelection);
202 aFactory->registerValidator("PartSet_AngleSelection", new PartSet_AngleSelection);
203 aFactory->registerValidator("PartSet_DifferentObjects", new PartSet_DifferentObjectsValidator);
204 aFactory->registerValidator("PartSet_CoincidentAttr", new PartSet_CoincidentAttr);
206 aFactory->registerValidator("GeomValidators_DifferentShapes", new GeomValidators_DifferentShapes);
207 aFactory->registerValidator("GeomValidators_ShapeType", new GeomValidators_ShapeType);
208 aFactory->registerValidator("GeomValidators_Face", new GeomValidators_Face);
209 aFactory->registerValidator("GeomValidators_Finite", new GeomValidators_Finite);
211 aFactory->registerValidator("GeomValidators_ConstructionComposite",
212 new GeomValidators_ConstructionComposite);
214 aFactory->registerValidator("GeomValidators_ZeroOffset",
215 new GeomValidators_ZeroOffset);
217 aFactory->registerValidator("GeomValidators_BooleanArguments",
218 new GeomValidators_BooleanArguments);
220 aFactory->registerValidator("PartSet_SketchEntityValidator",
221 new PartSet_SketchEntityValidator);
223 aFactory->registerValidator("GeomValidators_Different",
224 new GeomValidators_Different);
227 void PartSet_Module::registerFilters()
229 //Registering of selection filters
230 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
231 ModuleBase_FilterFactory* aFactory = aConnector->selectionFilters();
234 void PartSet_Module::registerProperties()
236 Config_PropManager::registerProp("Sketch planes", "planes_size", "Size", Config_Prop::Double,
238 Config_PropManager::registerProp("Sketch planes", "planes_thickness", "Thickness",
239 Config_Prop::Integer, SKETCH_WIDTH);
242 void PartSet_Module::onOperationCommitted(ModuleBase_Operation* theOperation)
244 if (PartSet_SketcherMgr::isNestedSketchOperation(theOperation)) {
245 mySketchMgr->commitNestedSketch(theOperation);
248 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>(theOperation);
249 if (!aFOperation || aFOperation->isEditOperation())
251 // the selection is cleared after commit the create operation
252 // in order to do not use the same selected objects in the restarted operation
253 // for common behaviour, the selection is cleared even if the operation is not restarted
254 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
255 XGUI_Workshop* aWorkshop = aConnector->workshop();
256 aWorkshop->selector()->clearSelection();
258 /// Restart sketcher operations automatically
259 FeaturePtr aFeature = aFOperation->feature();
260 std::shared_ptr<SketchPlugin_Feature> aSPFeature =
261 std::dynamic_pointer_cast<SketchPlugin_Feature>(aFeature);
262 if (aSPFeature && (myRestartingMode == RM_LastFeatureUsed ||
263 myRestartingMode == RM_EmptyFeatureUsed)) {
264 myLastOperationId = aFOperation->id();
265 myLastFeature = myRestartingMode == RM_LastFeatureUsed ? aFOperation->feature() : FeaturePtr();
266 if (!sketchMgr()->sketchSolverError())
267 launchOperation(myLastOperationId);
269 breakOperationSequence();
272 void PartSet_Module::breakOperationSequence()
274 myLastOperationId = "";
275 myLastFeature = FeaturePtr();
276 myRestartingMode = RM_None;
279 void PartSet_Module::onOperationAborted(ModuleBase_Operation* theOperation)
281 breakOperationSequence();
284 void PartSet_Module::onOperationStarted(ModuleBase_Operation* theOperation)
286 if (PartSet_SketcherMgr::isSketchOperation(theOperation)) {
287 mySketchMgr->startSketch(theOperation);
289 else if (PartSet_SketcherMgr::isNestedSketchOperation(theOperation)) {
290 mySketchMgr->startNestedSketch(theOperation);
293 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>(theOperation);
295 myCustomPrs->activate(aFOperation->feature(), true);
298 void PartSet_Module::onOperationResumed(ModuleBase_Operation* theOperation)
300 ModuleBase_IModule::onOperationResumed(theOperation);
302 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>(theOperation);
304 myCustomPrs->activate(aFOperation->feature(), true);
307 void PartSet_Module::onOperationStopped(ModuleBase_Operation* theOperation)
309 bool isModified = myCustomPrs->deactivate(false);
311 if (PartSet_SketcherMgr::isSketchOperation(theOperation)) {
312 mySketchMgr->stopSketch(theOperation);
314 else if (PartSet_SketcherMgr::isNestedSketchOperation(theOperation)) {
315 mySketchMgr->stopNestedSketch(theOperation);
319 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(myWorkshop);
320 XGUI_Displayer* aDisplayer = aConnector->workshop()->displayer();
321 aDisplayer->updateViewer();
325 ModuleBase_Operation* PartSet_Module::currentOperation() const
327 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
328 XGUI_OperationMgr* anOpMgr = aConnector->workshop()->operationMgr();
329 return anOpMgr->currentOperation();
332 bool PartSet_Module::canUndo() const
334 bool aCanUndo = false;
335 SessionPtr aMgr = ModelAPI_Session::get();
336 if (aMgr->hasModuleDocument() && aMgr->canUndo()) {
337 aCanUndo = !aMgr->isOperation();
338 if (!aCanUndo) // check the enable state additionally by sketch manager
339 aCanUndo = aMgr->canUndo();
344 bool PartSet_Module::canRedo() const
346 bool aCanRedo = false;
347 SessionPtr aMgr = ModelAPI_Session::get();
348 if (aMgr->hasModuleDocument() && aMgr->canRedo()) {
349 aCanRedo = !aMgr->isOperation();
350 if (!aCanRedo) // check the enable state additionally by sketch manager
351 aCanRedo = aMgr->canRedo();
356 bool PartSet_Module::canApplyAction(const ObjectPtr& theObject, const QString& theActionId) const
359 if (theActionId == "DELETE_CMD" || theActionId == "MOVE_CMD") {
360 FeaturePtr aFeature = ModelAPI_Feature::feature(theObject);
362 // part features are removed in the PartSet module only.
363 if (aFeature->getKind() == PartSetPlugin_Part::ID())
370 bool PartSet_Module::canCommitOperation() const
372 return mySketchMgr->canCommitOperation();
375 bool PartSet_Module::canEraseObject(const ObjectPtr& theObject) const
377 // the sketch manager put the restriction to the objects erase
378 return mySketchMgr->canEraseObject(theObject);
381 bool PartSet_Module::canDisplayObject(const ObjectPtr& theObject) const
383 // the sketch manager put the restriction to the objects display
384 return mySketchMgr->canDisplayObject(theObject);
387 bool PartSet_Module::canActivateSelection(const ObjectPtr& theObject) const
389 bool aCanActivate = ModuleBase_IModule::canActivateSelection(theObject);
391 ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
392 bool isSketchOp = PartSet_SketcherMgr::isSketchOperation(anOperation),
393 isNestedOp = PartSet_SketcherMgr::isNestedSketchOperation(anOperation);
394 if (isSketchOp || isNestedOp) {
395 // in active sketch operation it is possible to activate operation object in selection
396 // in the edit operation, e.g. points of the line can be moved when the line is edited
397 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>(anOperation);
398 aCanActivate = aCanActivate || (aFOperation && aFOperation->isEditOperation());
403 bool PartSet_Module::addViewerMenu(QMenu* theMenu, const QMap<QString, QAction*>& theStdActions) const
405 return myMenuMgr->addViewerMenu(theMenu, theStdActions);
408 void PartSet_Module::updateViewerMenu(const QMap<QString, QAction*>& theStdActions)
410 myMenuMgr->updateViewerMenu(theStdActions);
414 void PartSet_Module::activeSelectionModes(QIntList& theModes)
417 if (mySketchMgr->activeSketch().get())
418 PartSet_SketcherMgr::sketchSelectionModes(theModes);
421 bool PartSet_Module::isMouseOverWindow()
423 return mySketchMgr->isMouseOverWindow();
426 void PartSet_Module::closeDocument()
431 void PartSet_Module::clearViewer()
433 myCustomPrs->clearPrs();
436 void PartSet_Module::propertyPanelDefined(ModuleBase_Operation* theOperation)
438 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>(theOperation);
442 ModuleBase_IPropertyPanel* aPanel = aFOperation->propertyPanel();
443 if (PartSet_SketcherMgr::isSketchOperation(aFOperation) && (aFOperation->isEditOperation())) {
444 // we have to manually activate the sketch label in edit mode
445 aPanel->activateWidget(aPanel->modelWidgets().first());
449 // Restart last operation type
450 if ((aFOperation->id() == myLastOperationId) && myLastFeature) {
451 ModuleBase_ModelWidget* aWgt = aPanel->activeWidget();
452 if (aFOperation->id().toStdString() == SketchPlugin_Line::ID()) {
453 // Initialise new line with first point equal to end of previous
454 PartSet_WidgetPoint2D* aPnt2dWgt = dynamic_cast<PartSet_WidgetPoint2D*>(aWgt);
456 std::shared_ptr<ModelAPI_Data> aData = myLastFeature->data();
457 std::shared_ptr<GeomDataAPI_Point2D> aPoint =
458 std::dynamic_pointer_cast<GeomDataAPI_Point2D>(aData->attribute(SketchPlugin_Line::END_ID()));
460 aPnt2dWgt->setPoint(aPoint->x(), aPoint->y());
461 PartSet_Tools::setConstraints(mySketchMgr->activeSketch(), aFOperation->feature(),
462 aWgt->attributeID(), aPoint->x(), aPoint->y());
463 aPanel->activateNextWidget(aPnt2dWgt);
471 void PartSet_Module::onSelectionChanged()
473 ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
477 bool isSketcherOp = false;
478 // An edit operation is enable only if the current opeation is the sketch operation
479 if (mySketchMgr->activeSketch()) {
480 if (PartSet_Tools::sketchPlane(mySketchMgr->activeSketch()))
481 isSketcherOp = PartSet_SketcherMgr::isSketchOperation(aOperation);
484 // Editing of constraints can be done on selection
485 ModuleBase_ISelection* aSelect = myWorkshop->selection();
486 QList<ModuleBase_ViewerPrs> aSelected = aSelect->getSelected();
487 if (aSelected.size() == 1) {
488 ModuleBase_ViewerPrs aPrs = aSelected.first();
489 ObjectPtr aObject = aPrs.object();
490 FeaturePtr aFeature = ModelAPI_Feature::feature(aObject);
492 std::string aId = aFeature->getKind();
493 if ((aId == SketchPlugin_ConstraintRadius::ID()) ||
494 (aId == SketchPlugin_ConstraintLength::ID()) ||
495 (aId == SketchPlugin_ConstraintDistance::ID()) ||
496 (aId == SketchPlugin_ConstraintAngle::ID())) {
497 editFeature(aFeature);
504 void PartSet_Module::onKeyRelease(ModuleBase_IViewWindow* theWnd, QKeyEvent* theEvent)
506 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
507 XGUI_OperationMgr* anOpMgr = aConnector->workshop()->operationMgr();
508 anOpMgr->onKeyReleased(theEvent);
511 void PartSet_Module::onEnterReleased()
513 myRestartingMode = RM_EmptyFeatureUsed;
516 void PartSet_Module::onOperationActivatedByPreselection()
518 ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
519 if(anOperation && PartSet_SketcherMgr::isNestedSketchOperation(anOperation)) {
520 // Set final definitions if they are necessary
521 //propertyPanelDefined(aOperation);
523 /// Commit sketcher operations automatically
524 anOperation->commit();
528 void PartSet_Module::onNoMoreWidgets()
530 ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
532 if (PartSet_SketcherMgr::isNestedSketchOperation(anOperation)) {
533 if (myRestartingMode != RM_Forbided)
534 myRestartingMode = RM_LastFeatureUsed;
535 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
536 XGUI_Workshop* aWorkshop = aConnector->workshop();
537 XGUI_OperationMgr* anOpMgr = aWorkshop->operationMgr();
538 // do nothing if the feature can not be applyed
539 if (anOpMgr->isApplyEnabled())
540 anOperation->commit();
545 void PartSet_Module::onVertexSelected()
547 ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
548 if (aOperation->id().toStdString() == SketchPlugin_Line::ID()) {
549 /// If last line finished on vertex the lines creation sequence has to be break
550 ModuleBase_IPropertyPanel* aPanel = aOperation->propertyPanel();
551 ModuleBase_ModelWidget* anActiveWidget = aPanel->activeWidget();
552 const QList<ModuleBase_ModelWidget*>& aWidgets = aPanel->modelWidgets();
553 QList<ModuleBase_ModelWidget*>::const_iterator anIt = aWidgets.begin(), aLast = aWidgets.end();
554 bool aFoundWidget = false;
555 bool aFoundObligatory = false;
556 for (; anIt != aLast && !aFoundObligatory; anIt++) {
558 aFoundWidget = *anIt == anActiveWidget;
560 aFoundObligatory = (*anIt)->isObligatory();
562 if (!aFoundObligatory)
563 myRestartingMode = RM_Forbided;
567 ModuleBase_ModelWidget* PartSet_Module::createWidgetByType(const std::string& theType, QWidget* theParent,
568 Config_WidgetAPI* theWidgetApi, std::string theParentId)
570 ModuleBase_IWorkshop* aWorkshop = workshop();
571 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(aWorkshop);
572 XGUI_Workshop* aXUIWorkshop = aConnector->workshop();
573 ModuleBase_ModelWidget* aWgt = NULL;
574 if (theType == "sketch-start-label") {
575 PartSet_WidgetSketchLabel* aLabelWgt = new PartSet_WidgetSketchLabel(theParent, aWorkshop,
576 theWidgetApi, theParentId, mySketchMgr->isConstraintsShown());
577 connect(aLabelWgt, SIGNAL(planeSelected(const std::shared_ptr<GeomAPI_Pln>&)),
578 mySketchMgr, SLOT(onPlaneSelected(const std::shared_ptr<GeomAPI_Pln>&)));
579 connect(aLabelWgt, SIGNAL(showConstraintToggled(bool)),
580 mySketchMgr, SLOT(onShowConstraintsToggle(bool)));
582 } else if (theType == "sketch-2dpoint_selector") {
583 PartSet_WidgetPoint2D* aPointWgt = new PartSet_WidgetPoint2D(theParent, aWorkshop,
584 theWidgetApi, theParentId);
585 aPointWgt->setSketch(mySketchMgr->activeSketch());
586 connect(aPointWgt, SIGNAL(vertexSelected()), this, SLOT(onVertexSelected()));
588 } else if (theType == "point2ddistance") {
589 PartSet_WidgetPoint2dDistance* aDistanceWgt = new PartSet_WidgetPoint2dDistance(theParent,
590 aWorkshop, theWidgetApi, theParentId);
591 aDistanceWgt->setSketch(mySketchMgr->activeSketch());
593 } else if(theType == "point2dangle") {
594 PartSet_WidgetPoint2dAngle* anAngleWgt = new PartSet_WidgetPoint2dAngle(theParent,
595 aWorkshop, theWidgetApi, theParentId);
596 anAngleWgt->setSketch(mySketchMgr->activeSketch());
598 } else if (theType == "sketch_shape_selector") {
599 PartSet_WidgetShapeSelector* aShapeSelectorWgt =
600 new PartSet_WidgetShapeSelector(theParent, aWorkshop, theWidgetApi, theParentId);
601 aShapeSelectorWgt->setSketcher(mySketchMgr->activeSketch());
602 aWgt = aShapeSelectorWgt;
603 } else if (theType == "sketch_multi_selector") {
604 PartSet_WidgetMultiSelector* aShapeSelectorWgt =
605 new PartSet_WidgetMultiSelector(theParent, aWorkshop, theWidgetApi, theParentId);
606 aShapeSelectorWgt->setSketcher(mySketchMgr->activeSketch());
607 aWgt = aShapeSelectorWgt;
608 } else if (theType == WDG_DOUBLEVALUE_EDITOR) {
609 aWgt = new PartSet_WidgetEditor(theParent, aWorkshop, theWidgetApi, theParentId);
610 } else if (theType == "export_file_selector") {
611 aWgt = new PartSet_WidgetFileSelector(theParent, aWorkshop, theWidgetApi, theParentId);
612 } else if (theType == "sketch_launcher") {
613 aWgt = new PartSet_WidgetSketchCreator(theParent, this, theWidgetApi, theParentId);
619 bool PartSet_Module::deleteObjects()
621 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
622 XGUI_Workshop* aWorkshop = aConnector->workshop();
623 XGUI_OperationMgr* anOpMgr = aWorkshop->operationMgr();
625 //SessionPtr aMgr = ModelAPI_Session::get();
626 // 1. check whether the delete should be processed in the module
627 ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
628 bool isSketchOp = PartSet_SketcherMgr::isSketchOperation(anOperation),
629 isNestedOp = PartSet_SketcherMgr::isNestedSketchOperation(anOperation);
630 if (isSketchOp || isNestedOp) {
631 // 2. find selected presentations
632 // selected objects should be collected before the current operation abort because
633 // the abort leads to selection lost on constraint objects. It can be corrected after #386 issue
634 ModuleBase_ISelection* aSel = workshop()->selection();
635 QObjectPtrList aSelectedObj = aSel->selectedPresentations();
636 // if there are no selected objects in the viewer, that means that the selection in another
637 // place cased this method. It is necessary to return the false value to understande in above
638 // method that delete is not processed
639 if (aSelectedObj.count() == 0)
642 // avoid delete of the objects, which are not belong to the current sketch
643 // in order to do not delete results of other sketches
644 QObjectPtrList aSketchObjects;
645 QObjectPtrList::const_iterator anIt = aSelectedObj.begin(), aLast = aSelectedObj.end();
646 for ( ; anIt != aLast; anIt++) {
647 ObjectPtr anObject = *anIt;
648 if (mySketchMgr->isObjectOfSketch(anObject)) {
649 // sketch feature should be used in this list because workshop deletes features only
650 // results are skipped
651 FeaturePtr aSketchFeature = ModelAPI_Feature::feature(anObject);
652 aSketchObjects.append(aSketchFeature);
655 // if the selection contains only local selected presentations from other sketches,
656 // the Delete operation should not be done at all
657 if (aSketchObjects.size() == 0)
660 // 3. start operation
661 QString aDescription = aWorkshop->contextMenuMgr()->action("DELETE_CMD")->text();
662 ModuleBase_OperationAction* anOpAction = new ModuleBase_OperationAction(aDescription, this);
664 // the active nested sketch operation should be aborted unconditionally
665 // the Delete action should be additionally granted for the Sketch operation
666 // in order to do not abort/commit it
667 if (!anOpMgr->canStartOperation(anOpAction->id(), isSketchOp/*granted*/))
668 return true; // the objects are processed but can not be deleted
670 anOpMgr->startOperation(anOpAction);
672 // 4. delete features
673 // sketch feature should be skipped, only sub-features can be removed
674 // when sketch operation is active
675 aWorkshop->deleteFeatures(aSketchObjects);
677 anOpMgr->commitOperation();
680 bool isPartRemoved = false;
681 // Delete part with help of PartSet plugin
682 // TODO: the deleted objects has to be processed by multiselection
683 QObjectPtrList aObjects = myWorkshop->selection()->selectedObjects();
684 if (aObjects.size() == 1) {
685 ObjectPtr aObj = aObjects.first();
686 FeaturePtr aFeature = std::dynamic_pointer_cast<ModelAPI_Feature>(aObj);
687 if (aFeature.get() && (aFeature->getKind() == PartSetPlugin_Part::ID())) {
688 // Remove feature should be created in the document of the part results
689 ResultPtr aPartResult = aFeature->firstResult();
690 if (aPartResult.get()) {
691 std::shared_ptr<ModelAPI_ResultPart> aPart =
692 std::dynamic_pointer_cast<ModelAPI_ResultPart>(aPartResult);
693 DocumentPtr aPartDoc = aPart->partDoc();
694 if (aPartDoc.get()) {
695 ModuleBase_OperationAction* anOpAction = new ModuleBase_OperationAction
696 (PartSetPlugin_Remove::ID().c_str(), this);
697 if (!anOpMgr->canStartOperation(anOpAction->id()))
698 return true; // the objects are processed but can not be deleted
700 anOpMgr->startOperation(anOpAction);
702 FeaturePtr aFeature = aPartDoc->addFeature(PartSetPlugin_Remove::ID());
705 anOpMgr->commitOperation();
706 isPartRemoved = true;
711 return isPartRemoved;
716 void PartSet_Module::onFeatureTriggered()
718 QAction* aCmd = dynamic_cast<QAction*>(sender());
719 if (aCmd->isCheckable() && aCmd->isChecked()) {
720 // 1. check whether the delete should be processed in the module
721 ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
722 bool isNestedOp = PartSet_SketcherMgr::isNestedCreateOperation(anOperation);
724 // in case if in the viewer nothing is displayed, the create operation should not be
725 // comitted even if all values of the feature are initialized
726 if (!mySketchMgr->canDisplayCurrentCreatedFeature()) {
727 // the action information should be saved before the operation is aborted
728 // because this abort leads to update command status, which unchecks this action
729 anOperation->abort();
730 launchOperation(aCmd->data().toString());
734 ModuleBase_IModule::onFeatureTriggered();
737 void PartSet_Module::onObjectDisplayed(ObjectPtr theObject, AISObjectPtr theAIS)
739 Handle(AIS_InteractiveObject) anAIS = theAIS->impl<Handle(AIS_InteractiveObject)>();
740 if (!anAIS.IsNull()) {
741 Handle(AIS_InteractiveContext) aCtx = anAIS->GetContext();
742 Handle(AIS_Dimension) aDim = Handle(AIS_Dimension)::DownCast(anAIS);
743 if (!aDim.IsNull()) {
744 aCtx->SetZLayer(aDim, myVisualLayerId);
746 Handle(SketcherPrs_SymbolPrs) aCons = Handle(SketcherPrs_SymbolPrs)::DownCast(anAIS);
748 aCtx->SetZLayer(aCons, myVisualLayerId);
753 void PartSet_Module::onBeforeObjectErase(ObjectPtr theObject, AISObjectPtr theAIS)
756 // it should be recomputed in order to disappear in the viewer if the corresponded object
758 //if (myCustomPrs->isActive())
759 // myCustomPrs->redisplay(theObject, false);
762 void PartSet_Module::onViewTransformed(int theTrsfType)
764 // Set length of arrows constant in pixel size
765 // if the operation is panning or rotate or panglobal then do nothing
766 if ((theTrsfType == 1) || (theTrsfType == 3) || (theTrsfType == 4))
769 ModuleBase_IViewer* aViewer = myWorkshop->viewer();
770 //Handle(V3d_View) aView = aViewer->activeView();
772 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(myWorkshop);
773 XGUI_Workshop* aWorkshop = aConnector->workshop();
774 XGUI_Displayer* aDisplayer = aWorkshop->displayer();
775 Handle(AIS_InteractiveContext) aContext = aViewer->AISContext();
777 Handle(V3d_Viewer) aV3dViewer = aContext->CurrentViewer();
778 Handle(V3d_View) aView;
780 for (aV3dViewer->InitDefinedViews();
781 aV3dViewer->MoreDefinedViews();
782 aV3dViewer->NextDefinedViews()) {
783 Handle(V3d_View) aV = aV3dViewer->DefinedView();
784 double aS = aV->Scale();
792 double aLen = aView->Convert(20);
794 double aPrevLen = SketcherPrs_Tools::getArrowSize();
795 SketcherPrs_Tools::setArrowSize(aLen);
796 const double aPrevScale = aViewer->Scale(aViewer->activeView());
797 const double aCurScale = aViewer->activeView()->Camera()->Scale();
798 aViewer->SetScale(aViewer->activeView(), aCurScale);
799 SketcherPrs_Tools::setTextHeight (aCurScale / aPrevScale * SketcherPrs_Tools::getTextHeight());
800 bool isModified = false;
801 QList<AISObjectPtr> aPrsList = aDisplayer->displayedPresentations();
802 foreach (AISObjectPtr aAIS, aPrsList) {
803 Handle(AIS_InteractiveObject) aAisObj = aAIS->impl<Handle(AIS_InteractiveObject)>();
805 Handle(AIS_Dimension) aDim = Handle(AIS_Dimension)::DownCast(aAisObj);
806 if (!aDim.IsNull()) {
807 aDim->DimensionAspect()->ArrowAspect()->SetLength(aLen);
808 aContext->Redisplay(aDim, false);
813 aDisplayer->updateViewer();
816 bool PartSet_Module::customizeObject(ObjectPtr theObject, const bool theUpdateViewer)
818 bool isRedisplayed = false;
819 if (myCustomPrs->isActive())
820 isRedisplayed = myCustomPrs->redisplay(theObject, theUpdateViewer);
822 return isRedisplayed;
825 void PartSet_Module::customizeObjectBrowser(QWidget* theObjectBrowser)
827 XGUI_ObjectsBrowser* aOB = dynamic_cast<XGUI_ObjectsBrowser*>(theObjectBrowser);
829 QLineEdit* aLabel = aOB->activeDocLabel();
830 QPalette aPalet = aLabel->palette();
831 aPalet.setColor(QPalette::Text, QColor(0, 72, 140));
832 aLabel->setPalette(aPalet);
833 aOB->treeView()->setExpandsOnDoubleClick(false);
834 #ifdef ModuleDataModel
835 connect(aOB->treeView(), SIGNAL(doubleClicked(const QModelIndex&)),
836 SLOT(onTreeViewDoubleClick(const QModelIndex&)));
837 connect(aOB, SIGNAL(headerMouseDblClicked(const QModelIndex&)),
838 SLOT(onTreeViewDoubleClick(const QModelIndex&)));
839 connect(aOB->treeView(), SIGNAL(doubleClicked(const QModelIndex&)),
840 myDataModel, SLOT(onMouseDoubleClick(const QModelIndex&)));
845 ObjectPtr PartSet_Module::findPresentedObject(const AISObjectPtr& theAIS) const
848 ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
850 /// If last line finished on vertex the lines creation sequence has to be break
851 ModuleBase_IPropertyPanel* aPanel = aOperation->propertyPanel();
852 ModuleBase_ModelWidget* anActiveWidget = aPanel->activeWidget();
853 // if there is an active widget, find the presented object in it
855 anActiveWidget = aPanel->preselectionWidget();
857 ModuleBase_WidgetValidated* aWidgetValidated = dynamic_cast<ModuleBase_WidgetValidated*>
859 if (aWidgetValidated)
860 anObject = aWidgetValidated->findPresentedObject(theAIS);
865 void PartSet_Module::addObjectBrowserMenu(QMenu* theMenu) const
867 QObjectPtrList aObjects = myWorkshop->selection()->selectedObjects();
868 int aSelected = aObjects.size();
869 SessionPtr aMgr = ModelAPI_Session::get();
870 QAction* aActivatePartAction = myMenuMgr->action("ACTIVATE_PART_CMD");
871 if (aSelected == 1) {
872 bool hasResult = false;
873 bool hasFeature = false;
874 bool hasParameter = false;
875 bool hasSubFeature = false;
876 ModuleBase_Tools::checkObjects(aObjects, hasResult, hasFeature, hasParameter, hasSubFeature);
878 ObjectPtr aObject = aObjects.first();
880 ResultPartPtr aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aObject);
881 FeaturePtr aPartFeature = std::dynamic_pointer_cast<ModelAPI_Feature>(aObject);
882 bool isPart = aPart.get() ||
883 (aPartFeature.get() && (aPartFeature->getKind() == PartSetPlugin_Part::ID()));
885 DocumentPtr aPartDoc;
887 aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aPartFeature->firstResult());
889 if (aPart.get()) // this may be null is Part feature is disabled
890 aPartDoc = aPart->partDoc();
892 theMenu->addAction(aActivatePartAction);
893 aActivatePartAction->setEnabled((aMgr->activeDocument() != aPartDoc));
895 } else if (aObject->document() == aMgr->activeDocument()) {
896 if (hasParameter || hasFeature)
897 theMenu->addAction(myMenuMgr->action("EDIT_CMD"));
900 ResultBodyPtr aResult = std::dynamic_pointer_cast<ModelAPI_ResultBody>(aObject);
902 theMenu->addAction(myMenuMgr->action("SELECT_PARENT_CMD"));
903 } else { // If feature is 0 the it means that selected root object (document)
904 if (aMgr->activeDocument() != aMgr->moduleDocument())
905 theMenu->addAction(myMenuMgr->action("ACTIVATE_PARTSET_CMD"));
907 } else if (aSelected == 0) {
908 // if there is no selection then it means that upper label is selected
909 QModelIndexList aIndexes = myWorkshop->selection()->selectedIndexes();
910 if (aIndexes.size() == 0) // it means that selection happens in top label outside of tree view
911 if (aMgr->activeDocument() != aMgr->moduleDocument())
912 theMenu->addAction(myMenuMgr->action("ACTIVATE_PARTSET_CMD"));
914 bool aNotDeactivate = (myWorkshop->currentOperation() == 0);
915 myMenuMgr->action("ACTIVATE_PARTSET_CMD")->setEnabled(aNotDeactivate);
917 aActivatePartAction->setEnabled(false);
920 void PartSet_Module::processEvent(const std::shared_ptr<Events_Message>& theMessage)
922 if (theMessage->eventID() == Events_Loop::loop()->eventByName(EVENT_DOCUMENT_CHANGED)) {
923 // Do not change activation of parts if an operation active
924 static QStringList aAllowActivationList;
925 if (aAllowActivationList.isEmpty())
926 aAllowActivationList <<
927 QString(PartSetPlugin_Part::ID().c_str()) <<
928 QString(PartSetPlugin_Duplicate::ID().c_str()) <<
929 QString(PartSetPlugin_Remove::ID().c_str());
930 if (myWorkshop->currentOperation() &&
931 (!aAllowActivationList.contains(myWorkshop->currentOperation()->id())))
933 XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(myWorkshop);
934 XGUI_Workshop* aWorkshop = aConnector->workshop();
935 XGUI_DataTree* aTreeView = aWorkshop->objectBrowser()->treeView();
936 QLineEdit* aLabel = aWorkshop->objectBrowser()->activeDocLabel();
937 QPalette aPalet = aLabel->palette();
939 SessionPtr aMgr = ModelAPI_Session::get();
940 DocumentPtr aActiveDoc = aMgr->activeDocument();
941 #ifdef ModuleDataModel
942 QModelIndex aOldIndex = myDataModel->activePartTree();
943 DocumentPtr aDoc = aMgr->moduleDocument();
944 if (aActiveDoc == aDoc) {
945 if (aOldIndex.isValid())
946 aTreeView->setExpanded(aOldIndex, false);
947 myDataModel->deactivatePart();
948 aPalet.setColor(QPalette::Text, QColor(0, 72, 140));
950 std::string aGrpName = ModelAPI_ResultPart::group();
951 for (int i = 0; i < aDoc->size(aGrpName); i++) {
952 ResultPartPtr aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aDoc->object(aGrpName, i));
953 if (aPart->partDoc() == aActiveDoc) {
954 QModelIndex aIndex = myDataModel->partIndex(aPart);
955 if (myDataModel->activatePart(aIndex)) {
956 if (aOldIndex.isValid())
957 aTreeView->setExpanded(aOldIndex, false);
958 aTreeView->setExpanded(myDataModel->activePartTree(), true);
959 aPalet.setColor(QPalette::Text, Qt::black);
966 // Problem with MPV: At first time on creation it doesn't work because Part feature
967 // creation event will be sent after
968 if (aActivePartIndex.isValid())
969 aTreeView->setExpanded(aActivePartIndex, false);
970 XGUI_DataModel* aDataModel = aWorkshop->objectBrowser()->dataModel();
971 aActivePartIndex = aDataModel->documentRootIndex(aActiveDoc);
972 if (aActivePartIndex.isValid())
973 aTreeView->setExpanded(aActivePartIndex, true);
975 aLabel->setPalette(aPalet);
976 aWorkshop->updateCommandStatus();
978 // Update displayed objects in order to update active color
979 XGUI_Displayer* aDisplayer = aWorkshop->displayer();
980 QObjectPtrList aObjects = aDisplayer->displayedObjects();
981 foreach(ObjectPtr aObj, aObjects)
982 aDisplayer->redisplay(aObj, false);
983 aDisplayer->updateViewer();
987 void PartSet_Module::onTreeViewDoubleClick(const QModelIndex& theIndex)
989 if (myWorkshop->currentOperation()) // Do not change activation of parts if an operation active
991 SessionPtr aMgr = ModelAPI_Session::get();
992 if (!theIndex.isValid()) {
993 aMgr->setActiveDocument(aMgr->moduleDocument());
996 if (theIndex.column() != 0) // Use only first column
998 ObjectPtr aObj = myDataModel->object(theIndex);
999 ResultPartPtr aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aObj);
1000 if (!aPart.get()) { // Probably this is Feature
1001 FeaturePtr aPartFeature = std::dynamic_pointer_cast<ModelAPI_Feature>(aObj);
1002 if (aPartFeature.get() && (aPartFeature->getKind() == PartSetPlugin_Part::ID())) {
1003 aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aPartFeature->firstResult());
1006 if (aPart.get()) { // if this is a part
1007 if (aPart->partDoc() == aMgr->activeDocument()) {
1008 aMgr->setActiveDocument(aMgr->moduleDocument());
1016 void PartSet_Module::onViewCreated(ModuleBase_IViewWindow*)
1018 // z layer is created for all started operations in order to visualize operation AIS presentation
1020 Handle(V3d_Viewer) aViewer = myWorkshop->viewer()->AISContext()->CurrentViewer();
1021 if (myVisualLayerId == 0) {
1022 if (myVisualLayerId == 0)
1023 aViewer->AddZLayer(myVisualLayerId);
1025 TColStd_SequenceOfInteger aZList;
1026 aViewer->GetAllZLayers(aZList);
1027 bool aFound = false;
1028 for (int i = 1; i <= aZList.Length(); i++) {
1029 if (aZList(i) == myVisualLayerId) {
1035 aViewer->AddZLayer(myVisualLayerId);