src/ModelHighAPI/Test/Test2488.py

   1 ## Copyright (C) 2017-20xx  CEA/DEN, EDF R&D
   2 ##
   3 ## This library is free software; you can redistribute it and/or
   4 ## modify it under the terms of the GNU Lesser General Public
   5 ## License as published by the Free Software Foundation; either
   6 ## version 2.1 of the License, or (at your option) any later version.
   7 ##
   8 ## This library is distributed in the hope that it will be useful,
   9 ## but WITHOUT ANY WARRANTY; without even the implied warranty of
  10 ## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  11 ## Lesser General Public License for more details.
  12 ##
  13 ## You should have received a copy of the GNU Lesser General Public
  14 ## License along with this library; if not, write to the Free Software
  15 ## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
  16 ##
  17 ## See http:##www.salome-platform.org/ or
  18 ## email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
  19 ##
  20
  21 from SketchAPI import *
  22
  23 from salome.shaper import model
  24
  25 model.begin()
  26 partSet = model.moduleDocument()
  27 Part_1 = model.addPart(partSet)
  28 Part_1_doc = Part_1.document()
  29 Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOZ"))
  30 SketchLine_1 = Sketch_1.addLine(0, 4, 6.2, 4)
  31 SketchProjection_1 = Sketch_1.addProjection(model.selection("EDGE", "PartSet/OZ"), False)
  32 SketchLine_2 = SketchProjection_1.createdFeature()
  33 SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchLine_2.result())
  34 SketchLine_3 = Sketch_1.addLine(6.2, 4, 6.2, 2.5)
  35 SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_3.startPoint())
  36 SketchLine_4 = Sketch_1.addLine(6.2, 2.5, 3.5, 2)
  37 SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
  38 SketchLine_5 = Sketch_1.addLine(3.5, 2, 3.5, 0)
  39 SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_5.startPoint())
  40 SketchProjection_2 = Sketch_1.addProjection(model.selection("EDGE", "PartSet/OX"), False)
  41 SketchLine_6 = SketchProjection_2.createdFeature()
  42 SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_5.endPoint(), SketchLine_6.result())
  43 SketchLine_7 = Sketch_1.addLine(3.5, 0, 0, 0)
  44 SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_5.endPoint(), SketchLine_7.startPoint())
  45 SketchConstraintCoincidence_7 = Sketch_1.setCoincident(SketchAPI_Line(SketchLine_2).startPoint(), SketchLine_7.endPoint())
  46 SketchLine_8 = Sketch_1.addLine(0, 4, 0, 0)
  47 SketchConstraintCoincidence_8 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchLine_8.startPoint())
  48 SketchConstraintCoincidence_9 = Sketch_1.setCoincident(SketchAPI_Line(SketchLine_2).startPoint(), SketchLine_8.endPoint())
  49 SketchConstraintHorizontal_1 = Sketch_1.setHorizontal(SketchLine_1.result())
  50 SketchConstraintVertical_1 = Sketch_1.setVertical(SketchLine_3.result())
  51 SketchConstraintVertical_2 = Sketch_1.setVertical(SketchLine_5.result())
  52 SketchConstraintLength_1 = Sketch_1.setLength(SketchLine_7.result(), 3.5)
  53 SketchConstraintLength_2 = Sketch_1.setLength(SketchLine_3.result(), 1.5)
  54 SketchConstraintLength_3 = Sketch_1.setLength(SketchLine_1.result(), 6.2)
  55 SketchConstraintLength_4 = Sketch_1.setLength(SketchLine_8.result(), 4)
  56 SketchConstraintLength_5 = Sketch_1.setLength(SketchLine_5.result(), 2)
  57 model.do()
  58 Revolution_1 = model.addRevolution(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchLine_8f-SketchLine_7r-SketchLine_5r-SketchLine_4r-SketchLine_3r-SketchLine_1r")], model.selection("EDGE", "PartSet/OZ"), 360, 0)
  59 Sketch_2 = model.addSketch(Part_1_doc, model.selection("FACE", "Revolution_1_1/Generated_Face&Sketch_1/SketchLine_1"))
  60 SketchProjection_3 = Sketch_2.addProjection(model.selection("VERTEX", "[Revolution_1_1/Generated_Face&Sketch_1/SketchLine_3][Revolution_1_1/Generated_Face&Sketch_1/SketchLine_1]__cc"), False)
  61 SketchPoint_1 = SketchProjection_3.createdFeature()
  62 SketchCircle_1 = Sketch_2.addCircle(0, 0, 4.75)
  63 SketchCircle_1.setAuxiliary(True)
  64 SketchConstraintCoincidence_10 = Sketch_2.setCoincident(SketchPoint_1.result(), SketchCircle_1.center())
  65 SketchCircle_2 = Sketch_2.addCircle(4.113620667973598, 2.375000000005359, 1.1)
  66 SketchCircle_2.setName("SketchCircle_3")
  67 SketchCircle_2.result().setName("SketchCircle_3")
  68 SketchCircle_2.results()[1].setName("SketchCircle_3_2")
  69 SketchConstraintCoincidence_11 = Sketch_2.setCoincident(SketchCircle_1.results()[1], SketchCircle_2.center())
  70 SketchConstraintRadius_1 = Sketch_2.setRadius(SketchCircle_1.results()[1], 4.75)
  71 SketchConstraintRadius_2 = Sketch_2.setRadius(SketchCircle_2.results()[1], 1.1)
  72 SketchLine_9 = Sketch_2.addLine(0, 0, 4.113620667973598, 2.375000000005359)
  73 SketchLine_9.setAuxiliary(True)
  74 SketchConstraintCoincidence_12 = Sketch_2.setCoincident(SketchAPI_Point(SketchPoint_1).coordinates(), SketchLine_9.startPoint())
  75 SketchConstraintCoincidence_13 = Sketch_2.setCoincident(SketchCircle_2.center(), SketchLine_9.endPoint())
  76 SketchProjection_4 = Sketch_2.addProjection(model.selection("EDGE", "Sketch_1/SketchLine_1"), False)
  77 SketchLine_10 = SketchProjection_4.createdFeature()
  78 SketchConstraintAngle_1 = Sketch_2.setAngleBackward(SketchLine_9.result(), SketchLine_10.result(), 30)
  79 SketchMultiRotation_1 = Sketch_2.addRotation([SketchCircle_2.results()[1]], SketchCircle_1.center(), 120, 3)
  80 [SketchCircle_3, SketchCircle_4] = SketchMultiRotation_1.rotated()
  81 SketchCircle_4.setName("SketchCircle_5")
  82 SketchCircle_4.result().setName("SketchCircle_5")
  83 SketchCircle_4.results()[1].setName("SketchCircle_5_2")
  84 SketchCircle_3.setName("SketchCircle_4")
  85 SketchCircle_3.result().setName("SketchCircle_4")
  86 SketchCircle_3.results()[1].setName("SketchCircle_4_2")
  87 SketchCircle_5 = Sketch_2.addCircle(4.745479052513824, 0.2071920899853478, 0.65)
  88 SketchCircle_5.setName("SketchCircle_6")
  89 SketchCircle_5.result().setName("SketchCircle_6")
  90 SketchCircle_5.results()[1].setName("SketchCircle_6_2")
  91 SketchConstraintCoincidence_14 = Sketch_2.setCoincident(SketchCircle_1.results()[1], SketchCircle_5.center())
  92 SketchCircle_6 = Sketch_2.addCircle(4.745479052513824, 0.2071920899853478, 0.8)
  93 SketchCircle_6.setName("SketchCircle_7")
  94 SketchCircle_6.result().setName("SketchCircle_7")
  95 SketchCircle_6.results()[1].setName("SketchCircle_7_2")
  96 SketchConstraintCoincidence_15 = Sketch_2.setCoincident(SketchCircle_5.center(), SketchCircle_6.center())
  97 SketchCircle_7 = Sketch_2.addCircle(2.5521731400059, 4.006109367385169, 0.8)
  98 SketchCircle_7.setName("SketchCircle_8")
  99 SketchCircle_7.result().setName("SketchCircle_8")
 100 SketchCircle_7.results()[1].setName("SketchCircle_8_2")
 101 SketchConstraintCoincidence_16 = Sketch_2.setCoincident(SketchCircle_1.results()[1], SketchCircle_7.center())
 102 SketchCircle_8 = Sketch_2.addCircle(2.5521731400059, 4.006109367385169, 0.65)
 103 SketchCircle_8.setName("SketchCircle_9")
 104 SketchCircle_8.result().setName("SketchCircle_9")
 105 SketchCircle_8.results()[1].setName("SketchCircle_9_2")
 106 SketchConstraintCoincidence_17 = Sketch_2.setCoincident(SketchCircle_1.results()[1], SketchCircle_8.center())
 107 SketchConstraintCoincidence_18 = Sketch_2.setCoincident(SketchCircle_7.center(), SketchCircle_8.center())
 108 SketchConstraintRadius_3 = Sketch_2.setRadius(SketchCircle_6.results()[1], 0.8)
 109 SketchConstraintRadius_4 = Sketch_2.setRadius(SketchCircle_5.results()[1], 0.65)
 110 SketchConstraintEqual_1 = Sketch_2.setEqual(SketchCircle_5.results()[1], SketchCircle_8.results()[1])
 111 SketchConstraintEqual_2 = Sketch_2.setEqual(SketchCircle_7.results()[1], SketchCircle_6.results()[1])
 112 SketchLine_11 = Sketch_2.addLine(0, 0, 4.745479052513824, 0.2071920899853478)
 113 SketchLine_11.setAuxiliary(True)
 114 SketchConstraintCoincidence_19 = Sketch_2.setCoincident(SketchAPI_Point(SketchPoint_1).coordinates(), SketchLine_11.startPoint())
 115 SketchConstraintCoincidence_20 = Sketch_2.setCoincident(SketchCircle_5.center(), SketchLine_11.endPoint())
 116 SketchLine_12 = Sketch_2.addLine(2.5521731400059, 4.006109367385169, 0, 0)
 117 SketchLine_12.setAuxiliary(True)
 118 SketchConstraintCoincidence_21 = Sketch_2.setCoincident(SketchCircle_7.center(), SketchLine_12.startPoint())
 119 SketchConstraintCoincidence_22 = Sketch_2.setCoincident(SketchAPI_Point(SketchPoint_1).coordinates(), SketchLine_12.endPoint())
 120 SketchConstraintAngle_2 = Sketch_2.setAngle(SketchLine_11.result(), SketchLine_9.result(), 27.5)
 121 SketchConstraintAngle_3 = Sketch_2.setAngle(SketchLine_9.result(), SketchLine_12.result(), 27.5)
 122 SketchMultiRotation_2 = Sketch_2.addRotation([SketchCircle_7.results()[1], SketchCircle_6.results()[1]], SketchCircle_1.center(), 120, 3)
 123 [SketchCircle_9, SketchCircle_10, SketchCircle_11, SketchCircle_12] = SketchMultiRotation_2.rotated()
 124 SketchCircle_12.setName("SketchCircle_13")
 125 SketchCircle_12.result().setName("SketchCircle_13")
 126 SketchCircle_12.results()[1].setName("SketchCircle_13_2")
 127 SketchCircle_11.setName("SketchCircle_11")
 128 SketchCircle_11.result().setName("SketchCircle_11")
 129 SketchCircle_11.results()[1].setName("SketchCircle_11_2")
 130 SketchCircle_10.setName("SketchCircle_12")
 131 SketchCircle_10.result().setName("SketchCircle_12")
 132 SketchCircle_10.results()[1].setName("SketchCircle_12_2")
 133 SketchCircle_9.setName("SketchCircle_10")
 134 SketchCircle_9.result().setName("SketchCircle_10")
 135 SketchCircle_9.results()[1].setName("SketchCircle_10_2")
 136 SketchMultiRotation_3 = Sketch_2.addRotation([SketchCircle_8.results()[1], SketchCircle_5.results()[1]], SketchAPI_Line(SketchLine_10).startPoint(), 120, 2)
 137 [SketchCircle_13, SketchCircle_14] = SketchMultiRotation_3.rotated()
 138 SketchCircle_14.setName("SketchCircle_15")
 139 SketchCircle_14.result().setName("SketchCircle_15")
 140 SketchCircle_14.results()[1].setName("SketchCircle_15_2")
 141 SketchCircle_13.setName("SketchCircle_14")
 142 SketchCircle_13.result().setName("SketchCircle_14")
 143 SketchCircle_13.results()[1].setName("SketchCircle_14_2")
 144 SketchCircle_15 = Sketch_2.addCircle(0, 5, 0.45)
 145 SketchCircle_15.setName("SketchCircle_16")
 146 SketchCircle_15.result().setName("SketchCircle_16")
 147 SketchCircle_15.results()[1].setName("SketchCircle_16_2")
 148 SketchCircle_16 = Sketch_2.addCircle(3.276608177155967, -2.294305745404186, 0.3)
 149 SketchCircle_16.setName("SketchCircle_17")
 150 SketchCircle_16.result().setName("SketchCircle_17")
 151 SketchCircle_16.results()[1].setName("SketchCircle_17_2")
 152 SketchCircle_17 = Sketch_2.addCircle(4.259590630302757, -2.982597469025442, 0.5)
 153 SketchCircle_17.setName("SketchCircle_18")
 154 SketchCircle_17.result().setName("SketchCircle_18")
 155 SketchCircle_17.results()[1].setName("SketchCircle_18_2")
 156 SketchLine_13 = Sketch_2.addLine(0, 0, 0, 5)
 157 SketchLine_13.setAuxiliary(True)
 158 SketchConstraintCoincidence_23 = Sketch_2.setCoincident(SketchAPI_Point(SketchPoint_1).coordinates(), SketchLine_13.startPoint())
 159 SketchConstraintCoincidence_24 = Sketch_2.setCoincident(SketchCircle_15.center(), SketchLine_13.endPoint())
 160 SketchLine_14 = Sketch_2.addLine(0, 0, 4.259590630302757, -2.982597469025442)
 161 SketchLine_14.setAuxiliary(True)
 162 SketchConstraintCoincidence_25 = Sketch_2.setCoincident(SketchAPI_Point(SketchPoint_1).coordinates(), SketchLine_14.startPoint())
 163 SketchConstraintCoincidence_26 = Sketch_2.setCoincident(SketchCircle_17.center(), SketchLine_14.endPoint())
 164 SketchConstraintCoincidence_27 = Sketch_2.setCoincident(SketchCircle_16.center(), SketchLine_14.result())
 165 SketchConstraintRadius_5 = Sketch_2.setRadius(SketchCircle_16.results()[1], 0.3)
 166 SketchConstraintRadius_6 = Sketch_2.setRadius(SketchCircle_17.results()[1], 0.5)
 167 SketchConstraintDistance_1 = Sketch_2.setDistance(SketchAPI_Line(SketchLine_10).startPoint(), SketchCircle_16.center(), 4, True)
 168 SketchConstraintDistance_2 = Sketch_2.setDistance(SketchCircle_1.center(), SketchCircle_17.center(), 5.2, True)
 169 SketchConstraintLength_6 = Sketch_2.setLength(SketchLine_13.result(), 5)
 170 SketchConstraintRadius_7 = Sketch_2.setRadius(SketchCircle_15.results()[1], 0.45)
 171 SketchConstraintAngle_4 = Sketch_2.setAngleBackward(SketchLine_10.result(), SketchLine_14.result(), 35)
 172 SketchProjection_5 = Sketch_2.addProjection(model.selection("EDGE", "PartSet/OY"), False)
 173 SketchLine_15 = SketchProjection_5.createdFeature()
 174 SketchConstraintCoincidence_28 = Sketch_2.setCoincident(SketchLine_13.endPoint(), SketchLine_15.result())
 175 model.do()
 176 ExtrusionCut_1_objects_1 = [model.selection("WIRE", "Sketch_2/Face-SketchCircle_3_2f_wire"), model.selection("FACE", "Sketch_2/Face-SketchCircle_9_2f"), model.selection("FACE", "Sketch_2/Face-SketchCircle_6_2f"), model.selection("FACE", "Sketch_2/Face-SketchCircle_18_2f"), model.selection("FACE", "Sketch_2/Face-SketchCircle_17_2f"), model.selection("WIRE", "Sketch_2/Face-SketchCircle_14_2f_wire"), model.selection("FACE", "Sketch_2/Face-SketchCircle_15_2f"), model.selection("FACE", "Sketch_2/Face-SketchCircle_5_2f"), model.selection("FACE", "Sketch_2/Face-SketchCircle_4_2f")]
 177 ExtrusionCut_1 = model.addExtrusionCut(Part_1_doc, ExtrusionCut_1_objects_1, model.selection(), model.selection("FACE", "Revolution_1_1/Generated_Face&Sketch_1/SketchLine_7"), 0, model.selection(), 0, [model.selection("SOLID", "Revolution_1_1")])
 178 ExtrusionCut_2_objects_1 = [model.selection("WIRE", "Sketch_2/Face-SketchCircle_11_2f-SketchCircle_15_2r_wire"), model.selection("WIRE", "Sketch_2/Face-SketchCircle_10_2f-SketchCircle_14_2r_wire"), model.selection("WIRE", "Sketch_2/Face-SketchCircle_8_2f-SketchCircle_9_2r_wire"), model.selection("WIRE", "Sketch_2/Face-SketchCircle_7_2f-SketchCircle_6_2r_wire")]
 179 ExtrusionCut_2 = model.addExtrusionCut(Part_1_doc, ExtrusionCut_2_objects_1, model.selection(), 0, 0.75, [model.selection("SOLID", "ExtrusionCut_1_1")])
 180 model.do()
 181 model.end()
 182
 183 assert(model.checkPythonDump())