1 # Copyright (C) 2017-2023 CEA, EDF
3 # This library is free software; you can redistribute it and/or
4 # modify it under the terms of the GNU Lesser General Public
5 # License as published by the Free Software Foundation; either
6 # version 2.1 of the License, or (at your option) any later version.
8 # This library is distributed in the hope that it will be useful,
9 # but WITHOUT ANY WARRANTY; without even the implied warranty of
10 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
11 # Lesser General Public License for more details.
13 # You should have received a copy of the GNU Lesser General Public
14 # License along with this library; if not, write to the Free Software
15 # Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
17 # See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
20 from SketchAPI import *
22 from salome.shaper import model
25 partSet = model.moduleDocument()
26 Part_1 = model.addPart(partSet)
27 Part_1_doc = Part_1.document()
28 Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOZ"))
29 SketchLine_1 = Sketch_1.addLine(0, 4, 6.2, 4)
30 SketchProjection_1 = Sketch_1.addProjection(model.selection("EDGE", "PartSet/OZ"), False)
31 SketchLine_2 = SketchProjection_1.createdFeature()
32 SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchLine_2.result())
33 SketchLine_3 = Sketch_1.addLine(6.2, 4, 6.2, 2.5)
34 SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_3.startPoint())
35 SketchLine_4 = Sketch_1.addLine(6.2, 2.5, 3.5, 2)
36 SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
37 SketchLine_5 = Sketch_1.addLine(3.5, 2, 3.5, 0)
38 SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_5.startPoint())
39 SketchProjection_2 = Sketch_1.addProjection(model.selection("EDGE", "PartSet/OX"), False)
40 SketchLine_6 = SketchProjection_2.createdFeature()
41 SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_5.endPoint(), SketchLine_6.result())
42 SketchLine_7 = Sketch_1.addLine(3.5, 0, 0, 0)
43 SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_5.endPoint(), SketchLine_7.startPoint())
44 SketchConstraintCoincidence_7 = Sketch_1.setCoincident(SketchAPI_Line(SketchLine_2).startPoint(), SketchLine_7.endPoint())
45 SketchLine_8 = Sketch_1.addLine(0, 4, 0, 0)
46 SketchConstraintCoincidence_8 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchLine_8.startPoint())
47 SketchConstraintCoincidence_9 = Sketch_1.setCoincident(SketchAPI_Line(SketchLine_2).startPoint(), SketchLine_8.endPoint())
48 SketchConstraintHorizontal_1 = Sketch_1.setHorizontal(SketchLine_1.result())
49 SketchConstraintVertical_1 = Sketch_1.setVertical(SketchLine_3.result())
50 SketchConstraintVertical_2 = Sketch_1.setVertical(SketchLine_5.result())
51 SketchConstraintLength_1 = Sketch_1.setLength(SketchLine_7.result(), 3.5)
52 SketchConstraintLength_2 = Sketch_1.setLength(SketchLine_3.result(), 1.5)
53 SketchConstraintLength_3 = Sketch_1.setLength(SketchLine_1.result(), 6.2)
54 SketchConstraintLength_4 = Sketch_1.setLength(SketchLine_8.result(), 4)
55 SketchConstraintLength_5 = Sketch_1.setLength(SketchLine_5.result(), 2)
57 Revolution_1 = model.addRevolution(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchLine_8f-SketchLine_7r-SketchLine_5r-SketchLine_4r-SketchLine_3r-SketchLine_1r")], model.selection("EDGE", "PartSet/OZ"), 360, 0)
58 Sketch_2 = model.addSketch(Part_1_doc, model.selection("FACE", "Revolution_1_1/Generated_Face&Sketch_1/SketchLine_1"))
59 SketchProjection_3 = Sketch_2.addProjection(model.selection("VERTEX", "[Revolution_1_1/Generated_Face&Sketch_1/SketchLine_3][Revolution_1_1/Generated_Face&Sketch_1/SketchLine_1]__cc"), False)
60 SketchPoint_1 = SketchProjection_3.createdFeature()
61 SketchCircle_1 = Sketch_2.addCircle(0, 0, 4.75)
62 SketchCircle_1.setAuxiliary(True)
63 SketchConstraintCoincidence_10 = Sketch_2.setCoincident(SketchPoint_1.result(), SketchCircle_1.center())
64 SketchCircle_2 = Sketch_2.addCircle(4.113620667973598, 2.375000000005359, 1.1)
65 SketchCircle_2.setName("SketchCircle_3")
66 SketchCircle_2.result().setName("SketchCircle_3")
67 SketchCircle_2.results()[1].setName("SketchCircle_3_2")
68 SketchConstraintCoincidence_11 = Sketch_2.setCoincident(SketchCircle_1.results()[1], SketchCircle_2.center())
69 SketchConstraintRadius_1 = Sketch_2.setRadius(SketchCircle_1.results()[1], 4.75)
70 SketchConstraintRadius_2 = Sketch_2.setRadius(SketchCircle_2.results()[1], 1.1)
71 SketchLine_9 = Sketch_2.addLine(0, 0, 4.113620667973598, 2.375000000005359)
72 SketchLine_9.setAuxiliary(True)
73 SketchConstraintCoincidence_12 = Sketch_2.setCoincident(SketchAPI_Point(SketchPoint_1).coordinates(), SketchLine_9.startPoint())
74 SketchConstraintCoincidence_13 = Sketch_2.setCoincident(SketchCircle_2.center(), SketchLine_9.endPoint())
75 SketchProjection_4 = Sketch_2.addProjection(model.selection("EDGE", "Sketch_1/SketchLine_1"), False)
76 SketchLine_10 = SketchProjection_4.createdFeature()
77 SketchConstraintAngle_1 = Sketch_2.setAngleBackward(SketchLine_9.result(), SketchLine_10.result(), 30)
78 SketchMultiRotation_1 = Sketch_2.addRotation([SketchCircle_2.results()[1]], SketchCircle_1.center(), 120, 3)
79 [SketchCircle_3, SketchCircle_4] = SketchMultiRotation_1.rotated()
80 SketchCircle_4.setName("SketchCircle_5")
81 SketchCircle_4.result().setName("SketchCircle_5")
82 SketchCircle_4.results()[1].setName("SketchCircle_5_2")
83 SketchCircle_3.setName("SketchCircle_4")
84 SketchCircle_3.result().setName("SketchCircle_4")
85 SketchCircle_3.results()[1].setName("SketchCircle_4_2")
86 SketchCircle_5 = Sketch_2.addCircle(4.745479052513824, 0.2071920899853478, 0.65)
87 SketchCircle_5.setName("SketchCircle_6")
88 SketchCircle_5.result().setName("SketchCircle_6")
89 SketchCircle_5.results()[1].setName("SketchCircle_6_2")
90 SketchConstraintCoincidence_14 = Sketch_2.setCoincident(SketchCircle_1.results()[1], SketchCircle_5.center())
91 SketchCircle_6 = Sketch_2.addCircle(4.745479052513824, 0.2071920899853478, 0.8)
92 SketchCircle_6.setName("SketchCircle_7")
93 SketchCircle_6.result().setName("SketchCircle_7")
94 SketchCircle_6.results()[1].setName("SketchCircle_7_2")
95 SketchConstraintCoincidence_15 = Sketch_2.setCoincident(SketchCircle_5.center(), SketchCircle_6.center())
96 SketchCircle_7 = Sketch_2.addCircle(2.5521731400059, 4.006109367385169, 0.8)
97 SketchCircle_7.setName("SketchCircle_8")
98 SketchCircle_7.result().setName("SketchCircle_8")
99 SketchCircle_7.results()[1].setName("SketchCircle_8_2")
100 SketchConstraintCoincidence_16 = Sketch_2.setCoincident(SketchCircle_1.results()[1], SketchCircle_7.center())
101 SketchCircle_8 = Sketch_2.addCircle(2.5521731400059, 4.006109367385169, 0.65)
102 SketchCircle_8.setName("SketchCircle_9")
103 SketchCircle_8.result().setName("SketchCircle_9")
104 SketchCircle_8.results()[1].setName("SketchCircle_9_2")
105 SketchConstraintCoincidence_17 = Sketch_2.setCoincident(SketchCircle_1.results()[1], SketchCircle_8.center())
106 SketchConstraintCoincidence_18 = Sketch_2.setCoincident(SketchCircle_7.center(), SketchCircle_8.center())
107 SketchConstraintRadius_3 = Sketch_2.setRadius(SketchCircle_6.results()[1], 0.8)
108 SketchConstraintRadius_4 = Sketch_2.setRadius(SketchCircle_5.results()[1], 0.65)
109 SketchConstraintEqual_1 = Sketch_2.setEqual(SketchCircle_5.results()[1], SketchCircle_8.results()[1])
110 SketchConstraintEqual_2 = Sketch_2.setEqual(SketchCircle_7.results()[1], SketchCircle_6.results()[1])
111 SketchLine_11 = Sketch_2.addLine(0, 0, 4.745479052513824, 0.2071920899853478)
112 SketchLine_11.setAuxiliary(True)
113 SketchConstraintCoincidence_19 = Sketch_2.setCoincident(SketchAPI_Point(SketchPoint_1).coordinates(), SketchLine_11.startPoint())
114 SketchConstraintCoincidence_20 = Sketch_2.setCoincident(SketchCircle_5.center(), SketchLine_11.endPoint())
115 SketchLine_12 = Sketch_2.addLine(2.5521731400059, 4.006109367385169, 0, 0)
116 SketchLine_12.setAuxiliary(True)
117 SketchConstraintCoincidence_21 = Sketch_2.setCoincident(SketchCircle_7.center(), SketchLine_12.startPoint())
118 SketchConstraintCoincidence_22 = Sketch_2.setCoincident(SketchAPI_Point(SketchPoint_1).coordinates(), SketchLine_12.endPoint())
119 SketchConstraintAngle_2 = Sketch_2.setAngle(SketchLine_11.result(), SketchLine_9.result(), 27.5)
120 SketchConstraintAngle_3 = Sketch_2.setAngle(SketchLine_9.result(), SketchLine_12.result(), 27.5)
121 SketchMultiRotation_2 = Sketch_2.addRotation([SketchCircle_7.results()[1], SketchCircle_6.results()[1]], SketchCircle_1.center(), 120, 3)
122 [SketchCircle_9, SketchCircle_10, SketchCircle_11, SketchCircle_12] = SketchMultiRotation_2.rotated()
123 SketchCircle_12.setName("SketchCircle_13")
124 SketchCircle_12.result().setName("SketchCircle_13")
125 SketchCircle_12.results()[1].setName("SketchCircle_13_2")
126 SketchCircle_11.setName("SketchCircle_11")
127 SketchCircle_11.result().setName("SketchCircle_11")
128 SketchCircle_11.results()[1].setName("SketchCircle_11_2")
129 SketchCircle_10.setName("SketchCircle_12")
130 SketchCircle_10.result().setName("SketchCircle_12")
131 SketchCircle_10.results()[1].setName("SketchCircle_12_2")
132 SketchCircle_9.setName("SketchCircle_10")
133 SketchCircle_9.result().setName("SketchCircle_10")
134 SketchCircle_9.results()[1].setName("SketchCircle_10_2")
135 SketchMultiRotation_3 = Sketch_2.addRotation([SketchCircle_8.results()[1], SketchCircle_5.results()[1]], SketchAPI_Line(SketchLine_10).startPoint(), 120, 2)
136 [SketchCircle_13, SketchCircle_14] = SketchMultiRotation_3.rotated()
137 SketchCircle_14.setName("SketchCircle_15")
138 SketchCircle_14.result().setName("SketchCircle_15")
139 SketchCircle_14.results()[1].setName("SketchCircle_15_2")
140 SketchCircle_13.setName("SketchCircle_14")
141 SketchCircle_13.result().setName("SketchCircle_14")
142 SketchCircle_13.results()[1].setName("SketchCircle_14_2")
143 SketchCircle_15 = Sketch_2.addCircle(0, 5, 0.45)
144 SketchCircle_15.setName("SketchCircle_16")
145 SketchCircle_15.result().setName("SketchCircle_16")
146 SketchCircle_15.results()[1].setName("SketchCircle_16_2")
147 SketchCircle_16 = Sketch_2.addCircle(3.276608177155967, -2.294305745404186, 0.3)
148 SketchCircle_16.setName("SketchCircle_17")
149 SketchCircle_16.result().setName("SketchCircle_17")
150 SketchCircle_16.results()[1].setName("SketchCircle_17_2")
151 SketchCircle_17 = Sketch_2.addCircle(4.259590630302757, -2.982597469025442, 0.5)
152 SketchCircle_17.setName("SketchCircle_18")
153 SketchCircle_17.result().setName("SketchCircle_18")
154 SketchCircle_17.results()[1].setName("SketchCircle_18_2")
155 SketchLine_13 = Sketch_2.addLine(0, 0, 0, 5)
156 SketchLine_13.setAuxiliary(True)
157 SketchConstraintCoincidence_23 = Sketch_2.setCoincident(SketchAPI_Point(SketchPoint_1).coordinates(), SketchLine_13.startPoint())
158 SketchConstraintCoincidence_24 = Sketch_2.setCoincident(SketchCircle_15.center(), SketchLine_13.endPoint())
159 SketchLine_14 = Sketch_2.addLine(0, 0, 4.259590630302757, -2.982597469025442)
160 SketchLine_14.setAuxiliary(True)
161 SketchConstraintCoincidence_25 = Sketch_2.setCoincident(SketchAPI_Point(SketchPoint_1).coordinates(), SketchLine_14.startPoint())
162 SketchConstraintCoincidence_26 = Sketch_2.setCoincident(SketchCircle_17.center(), SketchLine_14.endPoint())
163 SketchConstraintCoincidence_27 = Sketch_2.setCoincident(SketchCircle_16.center(), SketchLine_14.result())
164 SketchConstraintRadius_5 = Sketch_2.setRadius(SketchCircle_16.results()[1], 0.3)
165 SketchConstraintRadius_6 = Sketch_2.setRadius(SketchCircle_17.results()[1], 0.5)
166 SketchConstraintDistance_1 = Sketch_2.setDistance(SketchAPI_Line(SketchLine_10).startPoint(), SketchCircle_16.center(), 4, True)
167 SketchConstraintDistance_2 = Sketch_2.setDistance(SketchCircle_1.center(), SketchCircle_17.center(), 5.2, True)
168 SketchConstraintLength_6 = Sketch_2.setLength(SketchLine_13.result(), 5)
169 SketchConstraintRadius_7 = Sketch_2.setRadius(SketchCircle_15.results()[1], 0.45)
170 SketchConstraintAngle_4 = Sketch_2.setAngleBackward(SketchLine_10.result(), SketchLine_14.result(), 35)
171 SketchProjection_5 = Sketch_2.addProjection(model.selection("EDGE", "PartSet/OY"), False)
172 SketchLine_15 = SketchProjection_5.createdFeature()
173 SketchConstraintCoincidence_28 = Sketch_2.setCoincident(SketchLine_13.endPoint(), SketchLine_15.result())
175 ExtrusionCut_1_objects_1 = [model.selection("WIRE", "Sketch_2/Face-SketchCircle_3_2f_wire"), model.selection("FACE", "Sketch_2/Face-SketchCircle_9_2f"), model.selection("FACE", "Sketch_2/Face-SketchCircle_6_2f"), model.selection("FACE", "Sketch_2/Face-SketchCircle_18_2f"), model.selection("FACE", "Sketch_2/Face-SketchCircle_17_2f"), model.selection("WIRE", "Sketch_2/Face-SketchCircle_14_2f_wire"), model.selection("FACE", "Sketch_2/Face-SketchCircle_15_2f"), model.selection("FACE", "Sketch_2/Face-SketchCircle_5_2f"), model.selection("FACE", "Sketch_2/Face-SketchCircle_4_2f")]
176 ExtrusionCut_1 = model.addExtrusionCut(Part_1_doc, ExtrusionCut_1_objects_1, model.selection(), model.selection("FACE", "Revolution_1_1/Generated_Face&Sketch_1/SketchLine_7"), 0, model.selection(), 0, [model.selection("SOLID", "Revolution_1_1")])
177 ExtrusionCut_2_objects_1 = [model.selection("WIRE", "Sketch_2/Face-SketchCircle_11_2f-SketchCircle_15_2r_wire"), model.selection("WIRE", "Sketch_2/Face-SketchCircle_10_2f-SketchCircle_14_2r_wire"), model.selection("WIRE", "Sketch_2/Face-SketchCircle_8_2f-SketchCircle_9_2r_wire"), model.selection("WIRE", "Sketch_2/Face-SketchCircle_7_2f-SketchCircle_6_2r_wire")]
178 ExtrusionCut_2 = model.addExtrusionCut(Part_1_doc, ExtrusionCut_2_objects_1, model.selection(), 0, 0.75, [model.selection("SOLID", "ExtrusionCut_1_1")])
182 assert(model.checkPythonDump())
